Sylvania 6720FDG El manual del propietario

Marca: Sylvania

Modelo: 6720FDG

Categoría: Reproductores de casete

Tipo: El manual del propietario

20 inch DVD TRIPLE COMBO

Owner's Manual

7 F !3

II 11 "°_°°'°°'°°

_N_Nq_NYq

SUPPLIED ACCESSORIES

This unit comes with the following accessories. Please confirm that

all the accessories are included.

0000%o

00%°

[] Remote Control [] AA batteries x 2 [] Owner's Manual

(NF101 UD) (1EMN21452)

FEATURES

,, Auto Channel Programming

Timer Recording

1 year 8 events programmable

Daily/Weekly recording

One Touch Recording

,, Auto Clock Setting

• Screen Saver

,, Auto Power On and Off

Parental Lock

,, Resume Play (DVD)

Closed Caption Decoder

Virtual Surround

INSTRUCCIONES EN ESPAI_IOL INCLUDAS

PLEASE READ BEFORE USING THIS EQUIPMENT

i iiii!iiiiiiiiiiiili!! ii

ECAUTIONS

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAiN OR MOISTURE.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE CONSTITUTING

A RISK OF ELECTRIC SHOCK IS

PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING

THE APPLIANCE.

P ORTAN T SA FEGUA RDS

Read instructions - All the safety and operating instructions

should be read before the appliance is operated.

Retain Instructions - The safety and operating instructions

should be retained for future reference.

Need Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

Follow Instructions - All operating and use instructions

should be followed.

Cleaning - Unplug the unit from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted ser-

vice and, that for some specific reason, such as the possibili-

ty of the loss of an authorization code for a CATV converter,

is not intended to be unplugged by the user for cleaning or

any other purpose, may exclude the reference to unplugging

the appliance in the cleaning description otherwise required

in item 5.

Attachments - Do not use attachments not recommended

by the unit manufacturer as they may cause hazards.

Water and Moisture - Do not use this unit near water - for

example, near a bath tub, wash bowl, kitchen sink, or laun-

dry tub, in a wet basement, or near a swimming pool, and

the like.

Accessories - Do not place this unit on an ...................

unstable cart, stand, tripod, bracket, or table.

The unit may fall, causing serious injury to

someone, and serious damage to the appli-

ance. Use only with a cart, stand, tripod, brack-

et, or table recommended bythe manufacturer,

or sold with the unit. Any mounting of the appli-

ance should follow the manufacturer's instructions and

should use a mounting accessory recommended by the

manufacturer. An appliance and cart combination should be

moved with care. Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart combination to

overturn.

Ameubles - Cet appareil ne dolt _tre place ......... LE8 ..................OOMPC%_NTE8

que sur un meuble (avec ou sans roulettes) ..........................

recommand_ par le fabricant. Si vous rinstallez

sur un meuble &roulettes, d_placez les deux

ensembles avec precaution. Un arr_t brusque,

I'utilisation d'une force excessive et des sur-

faces irregulieres risquent de d_stabiliser I'ensemble et de le

renverser.

Ventilation - Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the unit and to protect it from overheating, and

these openings must not be blocked or covered. The open-

ings should never be blocked by placing the unit on a bed,

sofa, rug, or other similar surface. This unit should never be

placed near or over a radiator or heat register. This unit

should not be placed in a built-in installation such as a book-

case or rack unless proper ventilation is provided or the

manufacturer's instructions have been adhered to.

10. Power Sources - This unit should be operated only from the

type of power source indicated on the marking label. If you

are not sure of the type of power supply to your home, con-

sult your appliance dealer or local power company. For the

units intended to operate from battery power, or other

sources, refer to the operating instructions.

11. Grounding or Polarization - This unit is equipped with a

polarized alternating-current line plug (a plug having one

blade wider than the other). This plug will fit into the power

outlet only one way.This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing

the plug. If the plug should still fail to fit, contact your elec-

trician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

12. Power-Cord Protection - Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exitfrom the appliance.

13. Outdoor Antenna grounding - If an outside antenna or

cable system is connected to the unit, be sure the antenna

or cable system is grounded so as to provide some protec-

tion against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA No.

70, provides information with respect to proper grounding of

the mast and supporting structure, grounding ofthe lead-in

wire to an antenna discharge unit, size of grounding conduc-

tors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding

electrode. (Fig. A)

LE_DIN

WInE

ELECT_OOESYSTE_,I

CNECART25OpA_TH)

14. Lightning - For added protection for this unit receiver during

a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the unit due to lightning and power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other elec-

tric light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this unit through openings as they may touch dangerous

voltage points or short out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the unit.

18. Servicing - Do not attempt to service this unit yourself as

opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified ser-

vice personnel.

19. Damage Requiring Service - Unplug this unit from the wall

outlet and refer servicing to qualified service personnel

under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the operat-

ing instructions. Adjust only those controls that are covered

by the operating instructions, as improper adjustment of

other controls may result in damage and will often require

extensive work by a qualified technician to restore the unit to

its normal operation.

e. If the unit has been dropped or damaged in any way.

f. When the unit exhibits a distinct change in performance, this

indicates a need for service.

20. Replacement Parts - When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21. Safety Check - Upon completion of any service or repairs to

this unit, ask the service technician to perform routine safety

checks to determine that the unit is in proper operating con-

dition.

22. Heat - This unit product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

Or)

I--

t¢

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellec-

tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is

intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Oct appareil num_rique de la claese B eet conforme a la norme NMB-003 du Canada.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the

owner's manual. The user could lose the authority to operate this equipment if an unauthorized change or

modification is made.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service

this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.

DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION: POUR EVITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU'AU FOND.

Note to CATV system installer:

This reminder is provided to call the CATVsystem insta//er'sattention toArticle 820-40 of the NEC thatprovides guide-

fines for proper grounding and in particular, specifies that the cable ground shaftbe connected to the grounding system

of the building as close to the point of cameentry as practical.

LOCATION

For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place

for its installation:

,, Shield it from direct sunlight and keep it away from sources of intense heat.

,, Avoid dusty or humid places.

,, Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the

top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

,, Install unit in a horizontal position.

,, Avoid locations subject to strong vibration.

,, Do not place the unit near strong magnetic fields.

,, Avoid moving unit to locations where temperature differences are extreme.

,, Be sure to remove disc and unplug the AC power cord from the outlet before carrying the unit.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

,, Do not handle the power cord with wet hands.

,, Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

,, If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our

Authorized Service Center for servicing.

,, Do not put your fingers or objects into the unit disc loading tray.

,, Do not place anything directly on top of the unit.

MOISTURE WARNING

,, Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or

after heating a cold room or under conditions of high humidity. If you play a videotape or DVD in a moist

unit, it may damage the tape or DVD and the unit. When the condensation occurs inside the unit, turn the

unit on and leave it at least 2 hours to dry out.

NOTE ABOUT RECYCLING

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-

tions concerning chemical wastes.

The serial number of this product may be found on the back of the unit. No other unit has the same serial

number as yours. You should record the number and other vital information here and retain this book as a

3ermanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase Dealer Phone No.

Dealer Purchase from Model No.

Dealer Address Serial No.

iliiii iiiiiijiiiiiiii!i!iiiiliiiii!iiiiilili!iiiiiiiiiiiiiiiiiiiiiiiiiiiiil

BLEOFCONTENTS

PRECAUTIONS .......................... 2

IMPORTANT SAFEGUARDS ................ 2

TABLE OF CONTENTS .................... 5

SYMBOLS USED IN THIS MANUAL ............ 5

PREPARATION FOR USE .................. 6

ANTENNA/CABLE CONNECTIONS ............ 6

CONNECTINGTOAN EXTERNALDEVICE(FRONT)..6

CONNECTINGTO ADIGITALAUDIODEVICE(REAR) .7

INSTALLINGTHEBATTERIESIN REMOTECONTROL .7

OPERATING CONTROLS AND FUNCTIONS ...8

TV OPERATION AND SETTINGS ............ 9

WATCHING A TV PROGRAM ................. 9

SLEEP TIMER / PICTURE CONTROL ........... 9

CLOCK SET UP .......................... 10

DAYLIGHT-SAVING TIME ................... 11

ON-SCREEN MENU LANGUAGE ............. 11

CLOSED CAPTION SYSTEM ................ 11

V-CHIP SET UP .......................... 12

CHANNEL SET UP ........................ 13

ON-SCREEN DISPLAY ................... 14

STATUS DISPLAY ......................... 14

CHECKING THE STATUS ................... 14

MTS (Multi-channel Television Sound) SYSTEM . .14

VIDEO CASSETTE ...................... 15

PLAYBACK ............................ 15

BASIC PLAYBACK ........................ 15

SPECIAL PLAYBACK .................... 16

RENTAL PLAYBACK ....................... 16

AUTO REPEAT PLAYBACK .................. 16

SEARCH FUNCTION .................... 16

ZERO RETURN ........................... 16

PICTURE SEARCH ........................ 17

TIME SEARCH ........................... 17

INDEX SEARCH .......................... 17

RECORDING ........................... 18

NORMAL RECORDING ..................... 18

OTR (One Touch Recording) ................. 18

AUTOMATIC TIMER RECORDING ............ 19

AUTO RETURN ........................... 21

AUTO REWIND-EJECT ..................... 21

COPYING AVIDEO CASSETTE (from another source) .21

ABOUT THE DISCS ..................... 22

PLAYABLE DISCS ......................... 22

UNPLAYABLE DISCS ...................... 22

PLAYING A DISC ....................... 23

BASIC PLAYBACK ........................ 23

DISC MENU/TITLE MENU .................. 23

SPECIAL PLAYBACK FUNCTIONS & SETTINGS,. ,24

FUNCTION TABLE ........................ 24 LLI

AUDIO MENU ............................ 25 F-.

SUBTITLE LANGUAGE ..................... 25 O

ANGLE MENU ............................ 25 tJ

ZOOM .................................. 25 u.

BLACK LEVEL MENU ...................... 26 O

(Virtual Surround System) .............. 26

V.S.S

SEARCH MENU .......................... 26 m

REPEAT PLAYBACK ....................... 27 ,"_

PROGRAMMED PLAYBACK ................. 28 "_

RANDOM PLAYBACK ...................... 28

ON-SCREEN INFORMATION .............. 28

CHANGING THE DVD SET UP ITEMS ....... 29

CUSTOM MENU .......................... 29 t_

INITIALIZE .............................. 31

TROUBLESHOOTING GUIDE .............. 32 _:

MAINTENANCE ........................ 34 t_

F--

APPENDIX ............................ 35 Z

CABLE CHANNEL DESIGNATIONS ........... 35

t--

LANGUAGE CODE LIST .................... 35 t¢

SPECIFICATIONS ....................... 36 O

....................... 37

WARRANTY .................. BACK COVER

The following symbols below appear in some headings and notes in this manual, with the following meanings.

Description refers to TV/VCR

_,/V_G_ operation (in the mv/vcR mode). [G_

Description refers to playback of

DVD video discs (in the DVD mode).

Description refers to playback of

audio CDs (in the DVD mode).

Description refers to the items

to be set by the QUICK mode

(in the DVD mode).

i i:ii!iiiiiiiiiiTi

EPARATION FOR USE

Plug the incoming cable into the ANT. jack on the rear of the unit.

If your cable service supplies you with a converter box or if you use a satellite system, connect the box with

this unit as shown below.

Antenna

Rear of the unit

Incoming cable from Cable Company

or Satellite Antenna

*NOTE

(DO NOT DISCONNECT FROM BOX)

Some cable TV systems use scrambled

signals and require a special converter to

receive these channels. Consult your local

cable eompanj4

NOTE: Bent pin

Before plugging the antenna into

the ANT jack of the unit, check

that the pin is not bent. If it is bent, Cable

Plug

straighten the pin as illustrated,

then plug the pin into the ANT jack (Needs to be

of the unit. straightened)

(Straight pin)

For your safety and to

avoid damages to the unit,

unplug the antenna cable

from the ANT. jack before

moving the unit.

When you watch a program recorded on another source (VCR or video camera), use the

AUDIO/VIDEO input jacks on the front of the unit. AUX

Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO

jacks of this unit.

Then use [SELECT] or [CH. A / V] until "AUX" appears on the screen.

HH_ H HH_1 I

'11

ex. /¢

VCR or video /

camera, etc. To the Audio output iacks

(__ Audio Cable (commercially available) / (IN)_"____._

HEADPHONEVIDEO L-_JDIO-R

y Front of the unit

., _ To the Video output jack

(OUT) Video Cable (commercially available) (IN)

NOTE:

When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR

(another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equa/l%

YoucanconnectthisunittoadigitalaudiodevicetoenjoythedigitalaudioofDVD.Connecttoanamplifier

equippedwithdigitalinputjacks,suchasMDdeckorDATdeck.ToplayaDVDdiscinaDolbyDigitalMulti-

channelsurroundformatinthisunit,connecttoaDolbyDigitaldecoder.

Useanaudiocoaxialdigitalcable(commerciallyavailable)fortheaudioconnections.

_,,,,, _--_ ...................[ To AUDIO OUT

COAXIAL jack

Dolby Digital (DVD AUDIO OUT Only )

decoder

(OUT)

ToCoaxialdigital

(IN) Audio inputjack

/il:-I or

I_] Audio coaxial digital cable

(commercially available)

NI MD deck,

DAT deck, etc. !#__1 To Coaxial digital

__ o_o IILpl _INAI di° input jack

1.1,1

iJJ

NOTES:

. The audio source on a disc in a Do/by Digital Multi-channel surround format cannot be recorded as digital sound by an

MD or DAT deck.

. Be sure to turn off the power to all devices in the system before connecting another device.

. Refer to the Owner's Manuals for the devices to be connected to the unit.

. To connect to a MD or DATdeck, set "DOLBY DIGITAL" to "PCM" for the audio output in the setup mode, and to con-

nect to a Do/by Digital decoder, set to "BITSTREAM" (Refer to "AUDIO SETTING" on page 30). Playing a unit using

incorrect settings may generate noise distortion and may also damage the speakers.

1) Open the battery compartment cover by pressing

the cover on the remote unit in the direction of

the arrow.

2) Insert 2 "AA" penlight batteries into the battery

compartment in the direction indicated by the

polarity (+/-) markings.

3) Replace the cover.

[BATTERY PRECAUTIONS]

,, Be sure to follow the correct polarity as indicat-

ed in the battery compartment. Reversed batter-

ies may cause damage to the device.

,, Do not mix different types of batteries together

(e.g. Alkaline and Carbon-Zinc) or old batteries

with fresh ones.

,, If the device is not to be used for a long period

of time, remove the batteries to prevent damage

or injury from possible battery leakage.

,, Do not try to recharge batteries not intended to

be recharged; they can overheat and rupture.

iiiii}iii!ili!i!i!i!iii!iii!ii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiii!iii!il

ERATING CONTROLS AND FUNCTIONS

- FRONT PANEL -

1 2 34356

-REMOTE CONTROL-

29 ...........

30 ....................

31 ,..........

32 ......................

"''" 41

_--42

..... 43

,,,-,,,,,,,44

[FRONT PANEL]

1 POWER Button [TV/VCR£9 / DVDR23]

2 VOLUME _, / V Buttons [R9]

3 SKIP I_ / P-_I Buttons [DVD R26]

SEARCH _/_ Buttons [DVD R23]

4 PLAY _ Button [TV/VCR R15 / DVD R23]

5 STOP m Button [DVD R23]

6 OPEN/CLOSE __ Button [DVD R23]

7 Disc loading tray

8 DVD Indicator

9 SELECT Button [TVNCR P.9]

10 TV/VCR Indicator

11 CHANNEL A / v Buttons [TV/VCR R9]

12 Recording indicator

13 REC/OTR Button [TVNCR £18]

14 REW _ Button [TV/VCR R15]

15 F.FWD _ Button [TVNCR £15]

16 STOP/EJECT m__ Button [TV/VCR £15]

17 Remote sensor window

7 8 910 11 1213 14 4 15 16 17 18 19 20 21

18 HEADPHONE Jack

19 VIDEO input Jack [E6]

20 AUDIO L/R input Jacks [£6]

21 Cassette compartment

[REMOTE CONTROL]

22 POWER Button [TV/VCR £9 / DVD £23]

23 PICTURE/SLEEP Button [TVNCR £9]

24 Number Buttons [TV/VCR R9 / DVD £26]

25 DISPLAY Button [TVNCR P.14/DVD R28]

26 SPEED Button [TVNCR P.18]

27 TV/VCR Audio Button [TV/VCR P14]

28 PLAY _ Button [TVNCR P.15/ DVD £23]

29 REV _ Button [TVNCR P.15/ DVD £23]

SKiP I_ Button [DVD P.26]

30 PAUSE I I Button [TVNCR R15 / DVD R23]

31 TITLE Button [DVD R23]

32 CLEAR Button [TV/VCR £9 / DVD £26]

33 MODE Button [DVD R24]

34 REC Button [TV/VCR P18]

35 SELECT Button [TV/VCR R9]

36 CH. _, / _" Buttons [TV/VCR R9]

37 VOL. A / V Buttons [TV/VCR £9]

38 MUTE Button [TV/VCR P.9]

39 SET-UP Button [TVNCR £10/DVD £29]

40 FWD _ Button [TV/VCR P.15/ DVD £23]

SKiP _l Button [DVD P.26]

41 STOP B Button [TV/VCR £15 / DVD £23]

42 DISC MENU Button [DVD £23]

43 ENTER Button [TV/VCR £10/DVD £23]

44 AIT'I,.9 / _ Buttons [TVNCR £9 / DVD £23]

45 RETURN Button [TVNCR £10/DVD £25]

NOTES:

o We do not recommend the use of universal remote con-

trois as it does not control all the functions. Note that the

code number given by universal remote controls may

not program with this unit. For more details, contact the

manufacturer of the universal remote control

o Unless stated, a//operations described are based on

remote control use. Some operations can be carried

out using the menu bar on the TV screen.

OPERATION AND SETTINGS

1 After antenna or cable connection is _[_/J_.LG_J

completed, connect the power cord into

a standard AC outlet.

2 Press [POWER] to turn on the unit.

3 Use [OH. _, / V] or the Number buttons to

select your desired channel number.

To use the number buttons

,Singledigit channels."(Ex. 02, 03, 04 and so on)

Press[0] first toselect asingle digitchannel.

,Twodigit channels."(Ex. 12,38, 95 ...)

Presstwo digitsdirectljz

,Treedigit channels."(Ex. 115,125 ...)

Press[+100] first, thenpress the last two digits.

4 Use [VOL. A / V] to adjust the volume.

Press [MUTE] to instantly ]

mute the sound. Press it again l .........

to restore the previous sound Inni ..........

level.

NOTE:

. Even if you turn off the unit in the DVD mode, the unit

will be in the TV/VCR mode when you turn it on again.

TO WATCH CABLE OR SATELLITE CHANNEL

If the unit is connected to a cable box or satellite

box, use [OH. A / V] to select CH3 or CH4 accord-

ing to the output channel setting of the device and

select desired channel on that device.

TO WATCH EXTERNAL iNPUT

When an external equipment is

connected to the front AUDIO/

VIDEO input jacks, press

[SELECT] or [ON. _, / V] repeat-

Aux

edly until "AUX" appears on the

screen.

NOTE:

*If there is no signal input from the antenna terminal

and no operation for 15minutes, the unit will turn

itself off automaticallj4

You can set Sleep Timer and picture iTiV/_V_Ri

adjustment with [PICTURE / SLEEP].

,,The menu changes as described below every time

you press [PICTURE / SLEEP].

SleepTimer _ BRIGHT _ CONTRAST

SHARPNESS _ TINT _ COLOR

SLEEP TIMER SETTING

The Sleep Timer function is used to turn off the

unit without pressing [POWER] after a desired time.

' Press [P,OTURE / SLEEP] to ]

display the Sleep Timer menu. _...........

2 Within S seconds, set your desired sleep time

using [_1 / _].

,,[l_-]...Increase by 30 min. (Up to 120 min.)

,,[-,,_]...Decrease by 30 min.

NOTE:

*Tocancel the Sleep Timer,use [CLEAR] or [.,_/ _]

to set the time to "0".

3 To confirm the remainder time to shutdown,

press [PICTURE / SLEEP].

PICTURE CONTROL

1 Press [PICTURE / SLEEP] ...... /

repeatedly until desired control ................

is displayed.

2 Use[-,_/_] to adjust to your desired level within

5 seconds.

BRIGHT todecreasebrightnesstoincreasebrightness

CONTRAST todecreasecontrast to increasecontrast

COLOR to pale to brilliant

TINT to purple to green

SHARPNESSto soft to clear

,, Even if any power failure occurs, the unit will

retain its memory for this feature.

Or)

I--

I---

TV OPERATION AND SETTINGS

AUTOMATIC CLOCK SETTING

Set the unit clock correctly for VCR timer

recording• We suggest that you should

set the clock manually when you first set up the

unit, then set the auto clock setting to "ON" to cor-

rect the time periodically•

NOTE:

°Ifyou cannot receivea stationwith timesignals, auto

clock settingis not available•Usemanual setting onlj4

MANUAL CLOCK SETTING

In the example below, the clock is to be set to:

DATE: May 5th, 2006

SETTING TIME: 5:40PM

"I Press [SET-UP].

Use [A / T] to point to

"SETTING CLOCK", then

press [ENTER].

F TV,'VCR SETUP

TEMERPROGRAMM_Ne

SE_ENG OLOCK

CHANt/EL SET UP

USER'S SET UP

V CHrPSET UP

2 Use[A / T] to point to I ............

AUTO CLOCK [ON]

"MANUAL CLOCK SET", then | .................

press [ENTER]. / ........... E021

• , • |B ,_ MANUAL CLOCk< SET

,,If there ts no local PBS station tn ..... _om

[

your area or on your cable sys-

tem, select "AUTO CLOCK" and press [ENTER]

to turn "OFF" the function before this step.

Use [A / Y] to set your

desired month, day, year, hour

and minute•

Use [-',9/ _] to move to

another item.

MANUAL OLOOK SET |

MO_4TH DAy YEAR

O5 _' 0SFR_ 2OO6

HOUR MtNUTE

; !

Press [SET-UP].

Although seconds are not

displayed, they begin counting

from 00 when you press

[SET-UP]. Use this feature to

synchronize the clock with the correct time.

NOTE:

*When unplugging the ACcord or if there is a power

failure formore than 3 seconds, you may have to

reset the clock.

5:4OPM 1

TO CHANGE CLOCK SETTING

1 Follow steps 1to 2 above•

2 Select the item you want to change using [_].

3 Enter correct numbers using [A / Y].

4 Press [SET-UP] to start the clock•

NOTES:

, If a cable converter box is being used, make sure it is

turned on.

, You must use the remote control for the clock setting.

, If the unit is connected directly to a cable converter

box or satellite box, the local PBS station must be

selected on the cable box itself and the unit must be

set to the output channel of the cable converter box

or satellite box (usually channel 3 or 4), to enable to

set up or correct the clock automaticallj4

Press [SET-UP]. f" ............

TIMER PROGRAMMING

Using [A / V] select "SETTING ...........

CHANNEL SET UP

CLOCK", then press [ENTER]. _E_o.,P......_E_oP

2 Press [ENTER] to select "ON".

3 Press [T] to select

"AUTO CLOCK CH SEARCH".

Then press [ENTER].

,,The unit begins searching for

the station which contains the

auto clock set signal. The

search for a signal may take up

to 20 seconds per channel.

,,When the search has finished,

" appears at the lower left of

the screen.

i SETTINGOLOCK

AUTO CLOOK [ON]

AUTOOLOOKOHSEAROH

AUTO CLOOKOH [02]

AUTO OLOCK OHSEARCH

O8 10 13

NOTES:

* During AUTO CLOCK CH SEARCH, the picture may

be distorted.

* If no number appears on the TV screen, there are no

stations in your area which contain the Auto Clock

signal• Auto Clock Setting is not possible• Please use

Manual Clock Setting on this page.

4 Write down the numbers that appear on the

screen• They are the auto clock stations in your

area•

5 Press [RETURN] to go back to

"SETTING CLOCK" menu• ] ...........

Press [Y] to select ........ Eo_

AUTO CLOCK 0}4 SEARCH

"AUTO CLOCK CH".

B,_ AUTO CLOCK 0}4 [ 08 ]

Use [I /_] until you locate an ..............

D s • [OFF]

auto clock station number.

Press [SET-UP] to exit the menu.

NOTE:

, Once the unit is turned off, it will periodically check

and set the correct date and time.

Select this feature and the unit clock will

automatically advance one hour in April,

then reverse one hour in October.

• First Sunday of April : At 2 AM, the clock imme-

diately changes to 3 AM. Any timer programming

you have set to occur between 2 AM and 3 AM will

be canceled.

• Last Sunday of October : At 2 AM, the clock

immediately changes to 1 AM.

1 Press [SET-UP].

Use [A / T] to point to

"SETTING CLOCK", then

press [ENTER].

TV,VCR SETUP -

TIMER PROGRAMM_NO

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V CH_PSET UP

LANeUAGE rENeUSHI

2 Use [A / V] to point to "D.S.T.".

SETTING CLOCK ]

AUTO CLOCK [ON]

AUTO CLOCK CH SEARCH

AUTO CLOCK CH [O2]

MANUAL CLOCK SET

DST ......... [ON].....

3 Press [ENTER] to select "ON".

NOTE:

, Tocancel the setting, select "OFF".

4 Press [SET-UP] to exit the menu.

YOU can select the languageof on-screen I_G_!

menu among English, Spanish and French.

1 Press [SET-UP]. f Tv,........

Use [A / V] to point to [ ..........BETTINGCLocKA .....

CHANNEL SET UP

"LANGUAGE". .... .......

v CH_PSET U_

B,_ LANGUAGE [ENGLiSH] .....

CAPT ON OFt

ZERO RETURN

TIME SEARCH

_NDEX SEARCH

2 Press [ENTER] repeatedly to select "ENGLISH",

"ESPANOL" or "FRANQAIS".

3 Press [SET-UP] to exit the menu.

NOTES:

, This function effects only the language on the screen

menu and not the audio source.

* If for some reason the menu is already in Spanish or

French, press [SET-UP], using [A / V] point to

"IDIOMA [ESPAfilOL]" or "LANGAGE [FRAN_AIS]",

then press [ENTER] repeatedly to select desired lan-

guage, then press [SET-UP].

You can view specially labeled (cc) TV

programs, movies, news and pre-recorded

tapes with either a dialogue caption or text display.

1 Press [SET-UP].

Use [A / T] to point to

"CAPTION".

I . TVNOR SETUP-

T_MERPROGRAMMING

SETTINGCLOCK

CHANNEL SET UP

USER'S SETUP

V-CH_P_ET _P

£ANGUAG_ _E_GL_SH]

CAPTtO_ ¸¸¸¸OFF]....

ZERO RE_0_ N'

TEMESEARCH

INDEXSEARCH

2 Press [ENTER] repeatedly to

select your desired caption

mode.

v CH_P SET UP

LANGUAG E !EN 3U_rt]

B,_ CAPTEOb [CAPTEONI] ......

ZERO RETLt_N

TIME SEARCH

INDEX SEARCH

• CAPTION mode: You can watch dramas, movies and

news while captioning the dialogues and the contents

of news.

• TEXT mode: You can watch half screen text informa-

tion if you want.

*"CAPTION2" is usually used for a second language (if

available).

Press [SET-UP] to exit the menu.

NOTES:

, Even if any power failure, the unit will retain its mem-

ory for this feature.

, Some programs are not broadcasted with closed

captions. The unit is designed to provide error-free

closed captions with high quality antenna, cable and

VCR signals. Conversely, poor quality signals are

likely to result in caption errors or no captions at aft.

, Common signal conditions which may cause caption

errors are listed below:

- Electric motor brush noise

- Weak snowy reception on TV screen

- Multiplex signal reception displaying picture

ghosts or airplane flutter

- Playback of poorly recorded

or worn VCR tapes

, If the unit displays a black box on

the TV screen, this means that

the unit is set to the TEXT mode.

To clear screen, select "CAP-

TION 1", "CA PTION2" or "OFF".

TO CANCEL THE CLOSED CAPTION SYSTEM

1 Press [SET-UP]. Use [_, / V] to point to

"CAPTION".

2 Press [ENTER] repeatedly to select "OFF".

3 Press [SET-UP] to exit the menu.

TV OPERATION AND SETTINGS

[]TV RATING SET UP

This feature enables parents to prevent _ 4 Use [A / Y] to select a rating

that you wish to block. •vY _Ev_

TV Y7 ( ) [VIEW]

TV_.4 [WEW]

Press [ENTER] repeatedly to TV....14 I i [VlEw][VlEW]

TV MA( ) [VIEW]

set it to "BLOCK" or "VIEW".

their children from watching inappropriate

material on TV. When you try to access a blocked

program, "PROTECTED PROGRAM by ..." mes-

sage appears on the TV screen.

NOTE:

°Tochange the rating, the TV

must be turned to an unprotect- P_OTECTEDPROGRAM

by TV-y

ed program. If the screen on the

right is displayed, change the

channel to a station that is not

protected.

1 Press [SET-UP]. _ •...........

Use [A / Y] to select .................sE_,,_o_oo,

CHANNEL SET UP

"V-CHIP SET UP", then press ,__-O.,_ER'......_TOP

[ENTER]. _....... /....... 1OAI>TION rOFF1

2 Use the Number buttons to

enter the access code. AOO_ooo_

" For the first time set-up or in

the event the unit has lost

power, enter the default code of 0000.

3 Use [A / Y] to select "TV RATING", "MPAA

RATING" or "CHANGE CODE", then press

[ENTER].

Refer to the pages below to set up each item.

Selection Rating Category Explanations

TV-Y Appropriate for all children

TV-Y7 Appropriate for children seven and older

TV-G General Audience

TV-PG Parental Guidance suggested

TV-14 Unsuitable for children under 14

TV-MA Mature audience only

NOTES:

* Whenyou select a rating and set _ "t

it to "BLOCK",the higher ratings | •v¥ iwEwl

will be blocked automaticallj4 I" ..... / _ [v,_wl

TV_3 [BLOCK]

TV_>G (DLSV) [BLOCK]

[BLOCK]TV 14 (DLSV)

Thelower ratings will be avail- | TV_4A[_sv_ [BLOCK]

able for viewing.

* When you set the lowest rating to

"VIEW", all other ratings will be automatically avail-

able for viewing.

The TV-Y7, TV-PG, TV-14 and r

TV-MA ratings have the option

TV y [WEW]

of sub rating categories. _7< _ _w_w_

TV G IWEW]

Tv PG( ] IWEW]

Use [A / Y] to select a rating _ 14 ( ) IV'EW]

TV MA( ) [VIEW]

with sub-ratings, then press

[ENTER] twice.

P13[_

Use [A / V] to select a sub-

rating, then press [ENTER] to

set it to "BLOCK" or "VIEW".

NOTE:

* The Mocked sub-ratings will

appear next to the rating cate-

gory in the "TV RATING" menu.

TV PG {BLOOK]

_ IBLOOK]

[BLOCK]

S [BLOOK]

V [I3LOCK]

TV Y [WEW]

TV Y7 ( ) [V_EW]

TV_3 [WEW]

TV PG (DLSV) [BLOCK]

TV 14 (DLSV_ [BLOOK]

TV MA _ LSV) [BLOOK]

Selection I Rating Category Explanations

TV-Y7

FV I Fantasy Violence

TV-PG, TV-14, TV-MA

D Suggestive Dialog (TV-PG, TV-14 only)

L Coarse Language

S Sexual Situation

V V o ence

7 Press [SET-UP] to exit the menu.

[]MPAA RATING SET UP [] CHANGE ACCESS CODE

4 Use [A / Y] to point to your

desired item, then press

[ENTER] to select "BLOCK"

or "VIEW".

_e [WEW] }

[WEW]

Pe 13 [WEW]

_C 17 [BLOOK]

[BLOCK]

[BLOOK]

Selection Rating Category Explanations

G General Audience

PG Parental Guidance suggested.

PG-13 Unsuitable for children under 13

R Restricted; under 17 requires acco-

mpanying parent or adult guardian

NC-17 No one under 17 admitted

X Mature audience only

5 Press [SET-UP] to exit the menu.

Use the Number buttons to

enter your desired access

code in the "NEW CODE",

then enter the same code in

the "CONFIRM CODE". When

completed, the menu will

return to "V-CHIP SET UP".

NEWOODE

Press [SET-UP] to exit the menu.

NOTE:

oYour personal access code will be erased and wifl

return to the default (0000) when a power failure

occurs or when you turn off the power using a waft

switch. If you forget the code, unplug the power cord

for 10 seconds to restore the access code to 0000.

Channel presetting is necessary at the start or in case you moved the TV to a different area.

AUTO CHANNEL PROGRAMMING

1 Press [SET-UP].

TV_VCR SETUp.

Use [A / T] to point to .........._ETT,NGOLOO,<A.....

CHANNEL SET UP

usEn's SET UP

"CHANNEL SET UP", then ..........

LANGUAGE [ENGUSH]

press [ENTER]. o...... _oF_]

2 Use [A/T] to point to "AUTO o,A.........

CH PROGRAMMING", then ............ <OA_

press [ENTER]. _................

The tuner scans and memorizes all the active

channels in your area.

3 When the scanning is comple- ca 15]

ted, the lowest memorized

channel is displayed. (Example)

If "NO TV SIGNALS" appears

on the TV screen, check the

antenna connection and try ...........

again.

NOTES:

oTheunit may recognize CATV channels to be TV

channels if reception condition ispoor. In thiscase,

check the antenna connection and try "AUTO CH

PROGRAMMING" again.

oAuto channel programming is NOT necessary

when connected to a cable box or satellite box.

Just select the channel for cable box or satellite

input (ex. ¢H3 or ¢H4) on the un& then select

your desired channel on the cable box or satellite

box.

ADDING/DELETING CHANNELS

You can add channels that was not memorized due

to the bad reception status and also delete chan-

nels you no longer receive or seldom watch.

Press [SET-UP].

Use [,L / T] to point to

"CHANNEL SET UP", then

press [ENTER].

Use [A / T] to point to

"ADD/DELETE CH", then

press [ENTER].

f CHANNELSETUP

AODtDELETECHtCATV)

AUTOOHPnOGRAMM_NG

3 Use the Number buttons or

[CN. A / V] to select your

desired channel number.

(You can also use [A / V] to

enter it.)

,,Refer to page 9 on how to use

the Number buttons.

ADD_,DELETE

(Example: CHS)

4 Press [ENTER] repeatedly. The channel number

changes to red (deleted) or blue (added) every

time you press the button.

,,To delete another channel, repeat steps 3 to 4.

5 Press [SET-UP] to exit the menu.

NOTE:

oToconfirm that channel(s) has been deleted or

added, select it (them) using [CH. A / _'].

u.l

SCREEN DISPLAY

On screen display examples are shown ,_,_R,

below.

1_ °PLAYI_ 12:00AM_ _ 4

2_ oHIFI CH 123_5

STEREO/SAP _ _6

3_ oSp _7

1. VCR status

Displays the current VCR motion:

PLAY / STOP / REC / OTR / PAUSE / FF / REW

2. VCR sound mode status (during playback)

Displays "HIFI" when the tape is recorded in

Hi-Fi stereo mode.

3. Tape speed (during recording)

Displays the tape speed: SP / SLP

4. Clock

5. Channel number (in TV mode)

Displays the current channel number.

"AUX" is displayed in external input mode.

6. MTS status (in TV mode)

Displays the current sound status of the broad-

cast: STEREO / SAP

7. Tape counter (during playback or recording)

Shows the elapsed recording or playback time.

(Not available for a blank tape or blank portions

on the tape.) You can reset the counter by press-

ing [CLEAR].

While receiving a broadcast or playing a I_/_G_

VHS tape, you can check the status dis-

played on the screen by pressing [DISPLAY]. You

can also check the status of the preset MTS (Multi-

Channel Television sound). The display will change

as shown below each time you press [DISPLAY].

WHEN THE CLOSED CAPTION iS OFF

The display switches among VCR counter and clock.

D,sp,ayOFF co i

Lsp oou_To,_ i iJsp J

I After5seconds *iAfter5 seconds

J cH2 j

i i i

j _ i J J ;

J _

COUNT012_

WHEN THE CLOSED CAPTION iS ON

The display switches among VCR counter and clock.

Display OFF CLOCK/COUNTER

display

I STOP 540PM i

1 ¢_2 i

i _The display will disappear

L sp COU.To12_4 J after 5 _econds

MTS allows for reception of sound other than the main audio program. You can listen or record

monaural audio sound, stereo sound or Secondary Audio Program (SAP).

WHEN RECEIVING AN MTS BROADCAST

Press [TWVCR Audio] repeatedly to select a sound

mode when you watch or record a TV program.

,,The mode changes according to

the broadcast among "STEREO",

"SAP" and "MONO" every time | ......

you press the button.

NOTES:

, The initial setting is "STEREO".The unit records auto-

matically MTS broadcasts in Hi-Fi stereo sound unless

you select "SAP"beforehand.

, Ifyou select "SAP"when second audio is not available,

the unit will record in normal audio.

, Thissetting returns to the initial value when you turn off

the unit or unplug the power cord.

WHEN PLAYING CASSETTES

Press [TV/VCR Audio] repeatedly to select "HIFl"

or "MONO".

,,This setting is saved until the cassette is ejected.

NOTE:

* Theinitial setting is "HIFI". Whenyou play non-HIFI tapes,

the unit willplay only in the monauralmode even if the

settingis "HIFI".

WHEN INTHE EXTERNAL INPUT ("AUX") MODE

Any output mode setting does not affect the audio

output, and the current audio output mode does not

appear on the TV screen.

Thisunitwilloperatewithanycassettethathasthe

mark.Forbestresults,werecommendthe

useofhigh-qualitytapes.Donotusepoorqualityor

damagedtapes.

SELECTINGTAPE SPEEDS

Before recording, select the tape speed from : SP

mode (Standard Play) or SLP mode (Super Long

Play). You can also play a tape recorded in LP mode

(Long Play).

Tape Speed

Type of tape

SP mode

SLP mode

Recording/Playback time

T60 T120 T160

1 hour 2 hours 2-2/3 hours

3hours 6hours 8 hours

ERASE PREVENTION

Break off the tab on the

back edge of the cassette

to prevent accidental eras-

ing of recording.

\ Tab

Cover the hole with plastic

tape to record on the tape

again.

Plastic Tape

NOTES: J

o..

° In the TV/VCR mode, if the cassette without tab is insert-

ed, playback will start automatica//j4 u.I

* If you press [REC/OTR] or [REC] when a cassette with-

out tab is inserted, the unit will eject it automatica/Ij4

Or)

.AYBACK

Insert a pre-recorded tape so that the

unit turns on automatically (Auto

Power On).

2 Select TV/VCR mode by pressing [SELECT].

NOTE:

, If the erase-prevention tab has been removed, the

unit will change the VCRmode and starts playbak

automatical/j4

3 To start playback, [ .....

press [PLAY _].

NOTE:

*Even in the DVDmode, you can start the VCRplay-

back if you press [PLAY_] on the front panel (of

the TV/VCR side).

4 To stop the playback, / ....

press [STOP In].

5 To rewind the tape, [ ....

press [REV,,_,_]. /

To forward the tape, f F_,.*

press [FWD_,_-].

TRACKING ADJUSTMENT

,,Tracking adjustment will be set automatically when

you start playback (Digital tracking function).

,,If noise lines (black and white streaks) appear on o0

the playback picture, use [CH. A / V] until the

streaks disappear (Manual tracking adjustment), z

LI,J

This is available in Pause/Still/Slow mode, too. u.I

,,To release manual tracking mode, stop the tape 0

once and start playback again, o0

STILL PICTURE

,,During playback, press [PAUSE ||] to freeze the

picture.

You can advance the picture frame by frame by

pressing [PAUSE | |] repeatedly.

,,To release the Still mode, press [PLAY _].

SLOW MOTION

,,During playback, press [PAUSE ||] then press

[FWD_,_].

,,To release the Slow mode, press [PLAY _].

NOTE:

, If the unit keeps the slow mode or still mode for more

than 5 minutes, it will automatically enter the stop mode.

Tostop winding, press [STOP _].

6 To eject the tape from the unit, [ ......

press [STOP/EJECT _]

]

on the front panel.

Thisfunctionenablesyoutoimprovethe

picturequalitywhenplayingbackworn

cassettessuchasrentedtapes•

Press[SET-UP]•

Use[A/ V] to point to

"USER'S SET UP", then press

[ENTER].

-TVNCR SETUp

T_MERPROGRAMMING

SETTINGOLOCK

CHANNEL SET UP

USER'S SETUP

V CHtP SET UP

LANGUAGE [ENGUSH]

Use [A / Y] to point to [,. .... '......

"RENTAL"•

Press [ENTER] to select "ON". RE,EA,,LA_._O_ON].....

AUTO RETURN [OFF]

NOTE:

* Tocancel the setting, select "OFF"at this step.

3 Press [SET-UP] to exit the menu.

Press [PLAY _] to start [ ...........

playback.

NOTE:

* This setting will not change even if you turn off the

unit.

This function allows you to repeat a tape

indefinitely•

Press [SET-UP].

Use [A / Y] to point to

"USER'S SET UP", then press

[ENTER].

i TVNCR SETUP

T_MERPROGRAMMING

SETTINGCLOOK

OHANNELSET UP

USER'S SET UP

V OH_PSET UP

2 Use[A / T] to point to "REPEAT PLAY".

Press [ENTER] repeatedly _ .... .......

until your desired selection

"ALL" or "BLANK" appears. R..... o_REPEAT pLAy ALL] ....

AUTO RETURN O:'F

" ALL: Repeat playbackfrom the

beginning to the end of the tape.

,.BLANK: Repeatplaybackfrom the beginningto a part.

which is blankfor more than 10 seconds.

oOFF: Cancel repeat playback•

3 Press [SET-UP] to exit the menu.

4 Press [PLAY P,-] to start the r ......._'_

Repeat Play•

NOTES:

*If the rental mode is set to "ON","RENTALPLAY_"

display hasprieriO4

* This setting will not change even if you turn off the

unit.

FUNCTION

This function allows you to search easily _Ti_RI

a beginning point that you want to review

by rewinding or fast forwarding•

NOTE:

. Zero Return WILL NOT work on a blank tape or a blank

portion of a tape.

Rewind or forward the tape to the beginning

point at which you want to review.

2 Press [CLEAR] repeatedly to

set the counter to "0:00:00". l ............

3 Press [PLAY _] for playback or [REC] for

recording.

Press [STOP m] when playback or recording is

completed.

Press [SET-UP]. T..........

TEMER PROGRAMM_NO

Use [A / V] to point to "ZERO ...........CHANNEL SET UP

USER'S SET UP

RETURN", then press ...........

LANGUAGE [ENGUSH]

CAPTION [OFF]

[ENTER] ...........

• TEME SEAROH

INDEX SEARCH

The unit will begin rewinding

and the counter will appear on the TV screen•

The tape will automatically stop when the

counter returns to 0:00:00 (approx•)•

iiii_ iiii

This function is useful in finding or _,,V,_,_,.R,

skipping over a particular scene on a

tape. In this mode, the sound will be muted.

1 During playback, press [REV _11_]or [FWD I_1_]

to view at a high speed (in forward/reverse).

2 Press [REV ._] or [FWD _,t_] again to view at

super high speed (in LP/SLP modes only).

NOTE:

, Tapesrecorded in the SP or LP mode will normally

display a noise bar on the TV screen and the picture

may revert to black and white.

3 Press [PLAY D,-] to return to normal playback.

Thisfunctionallowsyou to quickly I_,L_I

advance the tape to your desired posi-

tion simply by entering the exact amount of playback

time you want to skip.

In the example below. To watch a program before/

after 2 hour 50 minutes from the present position,

in either direction.

1 Press [SET-UP].

Use [A / y] to point to "TIME

SEARCH", then press

[ENTER].

TV/VCR SETUP

rtMER PaOGRAMM_NG

SETTtNGCLOOK

OHANNELSET UP

USER'S SET UP

V OH_PSET UP

LANQUAGE [ENGUSH]

OAPTEON[OFF]

ZERO RETURN

• TEMESEARCH

INDEXSEARCH

2 Use [,& / T] until your desired [ • M_ _;=ARCH ]

time appears. ::2:_.

To cancel the Time Search at

this point, press [SET-UP].

NOTE:

° TimeSearch can be set up to a maximum of 9 hours

50 minutes (9:50) by 10minutes at a time.

3 Use ["9 / 1_] to rewind or fast forward to the

specified point.

The time counts down during the search. When

the counter reaches "0:00:00", the tape will start

playback automatically.

INDE, SEA,B6 N ,,,,,,:

This function allows you to index the

starting point to make it easy to reach

the point in either fast forward or rewind mode.

,,Every time you start recording, an index is marked

automatically. The index mark also works as the

starting point of Timer recording and OTR.

,,The index mark will not be recorded if [PAUSE ||]

is used during recording.

,,The time gap between making the index marks on

the tape should be greater than 1 minute for SP

recording, 2 minutes for LP recording and 3 min-

utes for SLP recording.

,,In some cases, the index mark at the beginning of

video tape cannot be detected.

Example: You are watching program number 4 and

want to fast forward to program number 7. Skip

three programs.

CURRENT PLAYBACK PROGRAM

Beginning of | End of

the tape • the tape

r4 3 2 1 1 2 3

INDEX MARK

Press [SET=UP].

Use [A / Y] to point to

"INDEX SEARCH", then press

[ENTER]. i -TVNCR SETUP

T_MERPROGaAMM_Ne

SETTING OLOCK

CHANNEL SET UP

USER'S SET UP

V-OH_pSET UP

_ANGUAGE [ENGUSH]

CAPTION [OFF]

ZERO RETURN

T_MESEAROH

_NDEXSEARCH

Use [A / Y] until the number

of programs that you want to

skip appears.

3 Use [-'111/ I_]. The unit begins rewinding or fast

forwarding to the beginning of desired program.

4 When the search is completed, the unit will start

playback automatically.

,,The numbers of Index Search can be set up to

20.

,,This function is not available during recording.

]

TO CANCEL DURING TIME SEARCH

Press [STOP/EJECT _] on the unit or [STOP In].

TO CANCEL DURING INDEX SEARCH

Press [STOP/EJECT I1_] on the unit or [STOP In].

RECORDING

NOTES:

. Insert a cassette tape with its erase-prevention tab in p/ace.

. This unit cannot record the contents from the built-in DVD. This function enables you to start record- .T.\/,I._I_D.

. You can ONLY watch the same TV program that is being ing for specified length simply by press-

recorded, ing [REC/OTR] on the unit.

1 Use [CN. A / Y] or the Number I_G_

buttons to select the channel to

be recorded. I CH10 1

NOTE:

*If the unit is connected to a camebox or sate/rite

box, the unit mustbe on CH3 or CH4. Select the

channe/ to be recorded on the came box or sate/rite

box.

2 Press [SPEED] to select the

desired tape speed (SP/SLP). /

(Refer to "SELECTING TAPE _,sP

SPEEDS" on page 15.)

3 Press [REC] to start recording. [ ,_o

[

4 Press [PAUSE ||] to tempo- f .....

rarily stop recording unwanted

scenes.

Press [PAUSE ||] again or

[REC] to resume recording. _

NOTE:

. If the recording is paused for more than 5 minutes,

the unit will automatically switch to the recording

mode to prevent tape damage.

5 Press [STOP m] to stop recording.

Use [CH. ,& / y] or the Number buttons to

select the channel to be recorded.

NOTE:

. If the unit is connected to a cable box or satellite

box, the unit must be on CH3 or CH4. Select the

channel to be recorded on the cable box or satellite

box.

2 Press [SPEED] to select the desired tape speed

(SP/SLP).

(Refer to "SELECTING TAPE SPEEDS" on page 15.)

Press [REC/OTR] on the unit _"o_ _o_

repeatedly until your desired

length appears on the screen.

The recording time will increase

by 30 minutes up to 8 hours. _

Recording starts immediately when you press

[REC/OTR].

NOTE:

. If you press [REO/OTR] when "8:00" is displayed,

the unit returns to the normal recording mode.

Time(s) Display I Recording length

1 time (normal recording)

2 times 0:30 30 minutes

3 times 1:00 60 minutes

17 times 8:00 480 minutes

NOTES:

. Even if you press [POWER] during OTR, the unit

continues recording.

. You cannot start OTR with the remote control.

. In the SLP mode, maximum recording time, assum-

ing the tape starts at the beginning, is 8 hours using

7:-180 (or 8 hours using T-120).

. If the tape runs out before the end time, the unit will

switch to the stop mode immediately, eject the tape

and turn itself off.

. To show the remaining time of OTR, press [DISPLAY]

on the remote control to display "OTR" on the TV

screen. (It will show up momentarily then disappear)

TO CANCEL OTR iN PROGRESS

Press [STOP/EJECT B_] on the unit or [STOP m].

Youcanset8programstorecordon _TIV_R!

specificdays,dailyorweeklywithin

1yearperiod.

In the example below, the timer is being set to record:

DATE: July 3rd, 2006

SETTING TIME: from 7:30PM to 8:50PM

CHANNEL: CH61

TAPE SPEED: SP

1 Press [SET-UP].

Use [A / Y] to select

"TIMER PROGRAMMING",

then press [ENTER].

. TV/VCR SETUP-

T_MERPROGRAMMING

SETTINGOLOCK

CHANNEL SET UP

USER'S SET UP

V CHtP SETUP

LANGUAGE rENGUSH]

NOTE:

°If you have not yet set the clock, "MANUAL CLOCK

SET" menu appears. Set to the present time and

date (refer to "MANUAL CLOCK SETTING" on page

10) then start setting the timer recording.

2 Use [A / Y] to select the

desired program position, then:,. _=

press [11_]. i ili iii

3 Use [A / Y] until the desired

channel number appears, then

press [_].

NOTE:

. If the unit is connected to a cable box or satellite box,

the unitmust be on CH3or CH4. Select the channel

to be recorded on the cable box or satellite box.

4 Set the starting date.

For once recording :

Press [A] until the desired

date appears. Then press [1_].

For every day recording :

Torecord thesame channel

at the same time every day

Press [Y] until "EVRY DAY"

appears, then press [1_].

For weekly recording :

Torecord thesame channel

at the same time every week.

Press [Y] until "EVRY" and

your desired day of the week

(Ex. Every Monday) appear,

then press [1_].

i T_MERpROGRAMMING

¢14 DAlE BEGINEk_

[_ TIMER PROGRAMMING

CH D)TE _a_N _D

I TIMERPaOGRAMM_NG ]

CH+ _}_ _ BEGtN END

+ _ : : + +

] : :

Use [A / T] to set the desired [" ................ "]

begin/end hour and minute. I,_+_7,_Mo,7:_::"+,_:_0_,:+q

Press [_,_]to move to next item./ :: :_::::: :::: ::/

Use [A / Y] until the desired

tape speed appears.

(Refer to "SELECTING TAPE

SPEEDS" on page 15.)

Press [ENTER] to complete setting.

- To set another program, repeat steps 2 to 7.

- To correct the program while setting, press [_]

to go back one step and use [A / V] to enter

the correct numbers.

- Press [SET-UP] to exit the menu.

Press [POWER] to set automatic timer recording.

The recording indicator lights up.

NOTES:

. You MUST turn off the unit to activate automatic

timer recording.

. If power is not turned off and

you continue watching TV,

"TIMER REC STANDBY" starts

flashing on the TV screen 2 min- 2_ _°_W_

utes before the programmed

start time.

, Make sure a cassette with erase-prevention tab is

inserted before turning off the unit. If the cassette does

not have the tab, it will be ejected when you press

[POWER] to turn off.

At the programmed start time, the unit begins

recording.

NOTES:

. The recording starts without turning on the TV screen.

. During recording, you can watch only currently being

recorded TV program or DVD playback.

Press [POWER] and [SELECT] to select the desired

mode.

. If the tape runs out before the end time, the recording

stops immediately and the cassette will be ejected.

TO CONFIRM THE PROGRAM

1 Press [POWER] to turn on the unit.

(The Recording indicator turns off.)

2 Press [SET-UP].

Use [A / Y] to select "TIMER PROGRAMMING",

then press [ENTER].

3 Confirm the details of programs that appear on

the TV screen.

4 Press [SET-UP] to exit the menu.

RECORDING

ABOUT OVERLAP OF PROGRAMS

When programs overlap, a program may not be

recorded.

o Theprogram with an earlier start has priorltj4

oOnce the earliest program finishes,the overlapping pro-

grams will begin recording in sequence.

o Whenthe starting time is the same, the program set on

the highest position in the program list has prioritj4

o Theillustration below demonstrates the sequence of

recordings.

Re¢otd/ng Sequence

Program 1 =

10:00AM-11:00AM _

Program 2 =

9:O0AM-10:00AM

Program 3

9:30AM-12:00PM =

9:00AM 10:OOAM 11:00AM 12:00PM

"Re#ofdlng period is SHADED

TIMER PROGRAM EXTENSION

You can shift the time schedule of an automatic timer

recording after programming or during recording.

1 Press [POWER] to turn on the unit.

2 Press [SET-UP].

Use [A / Y] to select "TIMER PROGRAMMING",

then press [ENTER].

3 Press [REC] and use

[A / V] to select the desired

program.

Press [REC] repeatedly until your desired

begin/end time appears.

Each press will shift forward the begin/end time

for recording by 10 minutes.

NOTES:

oWhen the recording is already in progress, each press

will shift forwardthe end time only.

oIfyou want to cancel while setting, press [PAUSE |l]

on the remote control.The recording time returns to

the original time.

oWhen you shift forward the time schedule during

recording, the recording speed will be automatically

set to the SLP mode.

TO CORRECT A PROGRAM AFTERWARD

Press [POWER] to turn on the unit.

2 Repeat steps 1 to 2 of "AUTOMATIC TIMER

RECORDING" on page 19.

3 Press [_1_](or press [_l] to go back one step)

until the part you want to correct begins flashing,

then use [A / V] to make the changes.

Press [ENTER] to confirm.

4 Press [POWER] to set automatic timer recording.

TO CANCEL A PROGRAM

Press [POWER] to turn on the unit.

2 If recording is in progress, press

[STOP/EJECT B_] on the unit.

3 Press [SET-UP].

Use [_ / Y] to select "TIMER PROGRAMMING",

then press [ENTER].

4 Use [A / y] to select a program you want to

cancel and press [CLEAR].

5 Press [SET-UP] to exit the menu.

5 Press [ENTER] to complete the setting. Then

press [SET-UP] to exit the menu.

Thisfunctionallowsyoutoautomatically_'[_/k\_R_

searchthebeginningoftherecorded

program(s)aftertimerrecordingfinishes.

1 Press[SET-UP].

Use[A / Y] to point to

"USER'S SET UP",

then press [ENTER].

2 Use [A / Y] to point to

"AUTO RETURN", then press

[ENTER] to select "ON".

TV,'VCR SETUP ]

TIMERPROGRAMMING

SETTINGOLOCK

CHANNEL SET UP

USER'S SET UP

V CH_PSETUP

LANGUAGE [ENGUSH]

USER'S SET UP

RENTAL IOFF]

REPEAT pLAy

AUTO RETURN ;QN] ......

3 When all the timer recordings are completed, the

unit will rewind to the beginning of the recorded

program(s) and then turn itself off.

NOTE:

. If you turn off the unit while rewinding the tape, the

AUTO RETURN will stop.

TO CANCELTHE AUTO RETURN MODE

Repeat steps 1 to 2 and press [ENTER] to select

"OFF".

,, Even if any power failure occurs, the unit will

retain its memory for this feature.

,,When the end of a tape is reached ,_\H,V_R,

during recording, playback, or fast-

forward, the tape will automatically rewind to the

beginning. After rewinding finishes, the unit will

eject the tape and turn itself off.

,,This function is operative when REPEAT PLAY is

set to "OFF".

,,The tape will not auto-rewind during timer record-

ing or One Touch Recording (OTR).

COPYING A VIDEO CASSETTE

YOUcan make copies of video tapes for I_G_

your enjoyment.

You CANNOT copy a DVD to a videotape.

Unauthorized recordings of copyrighted I

WARNING: may be an infringement of copyright

video tapes

laws.

Connect the unit and a source (for playing) device

as shown the following diagram.

[This unit] _'_'_ ................ !!!!!!!!!!!!!!!!!!!!

AudloNIdeo \\ "_k source device]

_ablesSpplied)_

1 Insert a pre-recorded video cassette into the

source device (VCR, camcorder, etc.).

2 Insert a video cassette to record into this unit's

cassette compartment.

3 Press [SPEED] to select the /

desired recording speed [ _

(SP/SLP).

4 Press [SELECT] until "AUX" I

appears on the screen.

5 Press [REC/OTR] on the unit.

Aox]

Begin playback of the tape

in the source device.

NOTE:

. For best results during copying, use the front panel con-

trois whenever possible. The remote control might affect

the operation of the source device.

7 To stop copying, press [STOP/EJECT _] on

the unit, then stop the playback on the source

device.

THE DISCS

Playable Mark (logo) Region Recorded

.........diSCS................................................. code s!gna!s .......

ovo-v,doo

* 1,2.4.6,

_ _ Digital

DVD-RW

DVD-R .w " : video

"1,3,4,5.6,7,9,10 _ _ - (MPEG2)

DVD+RW

DVD+R _

* 1,3,4,5,6,8,9,10 0v_÷_o_....... ow+.

Audio CD _

* 4,6,10 mom',,__u=o

i i

CD-RW

...................... audio

*4,5,6,9,10CD-R_ t_

Disc i Disc types

size i

12 cm i Examp e Title 1 ., Title 2 ,

or i Chapter llChapter 21Chapter 31Chapter 41CPapte_ 11 Chapter 2

8 cm i 4 :1-" h; ;i; =1-_ :1 _ -_

Example

Jlack 1_ IJrack 2 _ITrack 3 _ITrock 4 _IJ_ack 5_I- T_ack6

" -r -r -r -r -I- -

is a trademark of DVD Format/Logo Licensing Corporation.

If you cannot play back a disc which bears one of the marks above, check the following notes.

"1 :This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot

be played back.

*2: Certain DVD-Video discs do not operate as described inthis manual due to the intentions of the disc's producers.

*3: Discs recorded in the VR (Video Recording) format cannot be played back.

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the

recorder or special properties of discs.

*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may

not play them back. Even if they are played back, the sound or video quality will be compromised.

*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD

recorder. However, depending on the recording status of a disc, the disc may not be played back at all

or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc

with the DVD recorder. Refer to the manual accompanying the DVD recorder.

*8: Only the discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not

be played back at all or normally (the picture or sound may not be smooth, etc.).

*9: If there is too much recording space left on a disc (the used portion is less than 55ram across), it may

not play back properly.

"10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read

it correctly.

"11 : The number inside the symbol refers to a region of the world and a disc encoded in a specific region

format can only be played back on unit with the same region code.

•NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM / CD-i / Photo CD / Video CD / DVD-Audio / DVD with region codes other than 1 or ALL /

DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3

,,The sound MAY NOT be heard: Super Audio CD

NOTE:

Onlythe sound recorded on the normal CD layer can be defvered. Thesound recorded on the high density Super Audio

CDlayer cannot be defivered.

, Any other discs without compatibility indications

A DISC

1 Press [POWER] to turn on the

unit.

2 Press [OPEN/CLOSE A] on the unit.

3 Place the disc in the tray, with /z_f

the label facing up. /_

4 Press [PLAY I_].

,,The tray will close automatically and playback will

start. When you play back a DVD which features a

title menu, it may appear on the screen.

NOTES:

, Closing the disc traymanually or bypressing

[OPEN/CLOSE __] also starts playback.

, WithDVDs thatuse titlesforplaybackprogram signals,

playbackmay start from thesecond title or it may skip

these titles.

5 To freeze the picture, press [PAUSE ||] during

playback.

NOTE:

, Thesound will be muted in pause mode.

6 Press [STOP _] to stop

playback temporarily.

,, Press [PLAY I_] to resume

the playback.

,, To cancel resume and stop the

disc, [STOP Ira] again.

NOTES:

. The resume information stays on even if the unit is

turned off

. A "prohibited icon" may appear [ @1

at the top-right on the TV screen

during operation. This means

that the operation is not available on the disc.

FAST FORWARD / FAST REVERSE

" During playback, press and hold _ IL_

[FWD _,,] for fast forward or

[REV ._HI] for fast reverse.

,,Every time you press and hold

the button, playback speeds up

and the level of the speed

appears on the screen.

NOTES:

, For DVDs, fast forward/reversespeed is different

depending on the disc.Approximate speed is (x2),

2 (x8), 3 #20), 4 (><50)and 5 (x100).

, For Audio CDs approximate speed is 1(x2), 2 (><8)

and 3 (><30).

, Whenyou use buttons on the front panel, use

[SEARCH _ / _,._-].

"To return to normal playback, press [PLAY _].

SLOW FORWARD / SLOW REVERSE

,,During playback, press [PAUSE ||].

,,Press and hold [FWD Im,,_]for slow for-

ward or [REV _,q] for slow reverse.

" Every time you press and hold _- i_i_

the button, playback is slowed

down and the level of the speed

appears on the screen.

NOTES:

, Slow forward/reverse speed varieswith the disc.

Approximate speed is 1(1/18), 2 (1/8) and 3 (1/2).

* Whenyou use buttons on the main unit, use

[SEARCH _l / _='-].

"To return to normal playback, press [PLAY I_].

DVD may contain menus to navigate the IID,V,D_-VI

disc and access special features.

STEP BY STEP PLAYBACK

During playback, press [PAUSE ||].

You can advance the picture frame by

frame by pressing [PAUSE ||] repeatedly.

,,To return to normal playback, press [PLAY _].

1 Press [DISC MENU] or [TITLE].

,,The DVD main menu / the title menu will appear.

,,You can call up the menu even during playback.

2 Use[A / '_,/ _ / _,.]toselect anitem,and press

[ENTER].

NOTES:

, Ifdisc menu is availableon the disc, audio language,

subtitleoptions, chapters for the title and other

options will appear forselection.

, Contents of menu and corresponding menu opera-

tions may vary between discs. Refer to the manual

accompanying the disc for details.

,-I

Or)

I.-

fill

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

Setting menu switches as below every time you press [MODE] during playback. ID,V,D=VJ I,_DJ

See the reference page for how to set each menu. Some functions are not available in specific

modes, but this is not a malfunction.

Press [MODE]

[ AUDIO MENU (p25)

[ SUBTITLE\IMENU (p25) _]_

[ ANGLE MENU (p25)

\l (If available)

[ ZOOM MENU (p25) _]_

[BLACK LEVEL MENU (p26)_

V.S.S MENU (p26)

SEARCH MENU\./(p26) _

[ REPEAT MENU (p27) J_

I A'B REPEATs,MENU (p27) _

MENU OFF

Press [MODE]

AUDIO STREAM 1 AUDIO MENU (p25) _T- STEREO

... _ _ L-ch

AUDIO STREAM 8 R-ch

OFF V.S.S MENU (p26) _1- OFF

SUBTITLE STREAM 1 | '_ 1

SUBTITLE STREAM 32

SEARCHMENUtp26tF_

ANGLE 1 _,

ANGLE 8

REPEAT MENU (p27) _q- OFF

OFF _ '_ TRACK

ZOOM 1 (xl.3) ALL

ZOOM 2 (x2.0)

ONOFFZOOM3 (x4.0) I A-B REPEA_MENU (p27) F]_ OFFA-BA-

MENU OFF

OFF

CHAPTER SEARCH

TITLE SEARCH

TIME SEARCH

MARKER SEARCH

OFF

CHAPTER

TITLE

OFF

A-

A-B

TRACK SEARCH

TIME SEARCH

MARKER SEARCH

AUDIO LANGUAGE _ Some DVD discs contain scenes which

have been shot from various angles and

You can select audio language during DVD playback you can change them as you like.

(if multi languages are available]. 1

Press [MODE] during playback. /l_>_...................... [q

2 Use [A / y] to select your desired language.

NOTES:

, This function may not work on some DVDs with mul-

tiple audio languages. In this case, set it on the disc

menu. (Operation varies depending on discs. Referto

the manual of the disc.)

, When "NOTAVAILABLE"appears

on the TV screen, it means this I_-_#¢................. )

functionis not availableon the I

disc.

3 Press [RETURN] to exit the menu.

STEREO SOUND MODE IL_

You can select sound output mode.

1 Press [MODE] during

playback.

2 Use [A / Y] to select the sound mode.

,,STEREO: stereo sound with left and right channels

L-ch: left channel sound only

R-ch: right channel sound only

3 Press [RETURN] to exit the menu.

During playback, press

[MODE] repeatedly until

ANGLE menu appears.

2 Use[A / T] to select your desired angle.

Press [RETURN] to exit the menu.

NOTE:

, Ifmultiple angle function is not available,this menu

doesnot appear on the screen.

The Zoom function allows you to enlarge _V__Va

the video image and to pan through the

enlarged image.

During playback, press

[MODE] repeatedly until

ZOOM menu appears.

2 Press [ENTER] repeatedly to select the required

zoom factor.

OFF ZOOMI(xl.3) ZOOM2(x2.0) ZOOM3(×4.0)

! I

3 Use [A / Y / _1 / I_] to move the zoomed picture

across the screen.

4 Press[RETURN]toexit. _ 1

- The zoomed position guide

appears on the right corner

of the TV screen in the zoom mode.

You can select a language for subtitles

during DVD playback (if available).

During playback, press

[MODE] repeatedly until

SUBTITLE menu appears.

2 Use[A / T] toselect your desired subtitle lan-

guage. To cancel subtitles, select "OFF".

3 Press [RETURN] to exit the menu.

NOTES:

. This function may not work on some DVDs with mul-

tiple subtitle languages. In this case, set it on the disc

menu. (Operation varies depending on discs. Refer to

the manual of the disc.)

*If the selected language does not have 3-letter code,

"---" will be displayed on the screen. (Refer to

LANGUAGE CODE LIST on page 35.)

NOTES:

. Zooming function does not work while disc menu is shown.

.Zooming function is not available on some discs.

* It may take several seconds to slide the zoomedpicture.

. The picture may be distorted if you operate other

functions (ex. pause, fast forward etc.) repeatedly in

the zoom mode.

. To cancel the zoom mode, repeat steps 1-2 and

press [ENTER] until "OFF" appears.

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

You can adjust the Black Level to make the

black parts of the picture brighter.

1 During playback, press

[MODE] repeatedly until

BLACK LEVEL menu

appears.

2 Use [A / y] to select "ON" or "OFF".

,, ON: Makes the dark parts brighter.

OFF: Shows the original picture as recorded.

(Initial setting)

3 Press [RETURN] to exit the menu.

NOTE:

, The setting will be savedeven if the unit is turned off.

You can enjoy surround-sound effect _

over two speakers on this unit.

1 During playback, press

[MODE] repeatedly until

V.S.S menu appears.

2 Use [A / T] to select the desired sound effect.

,, 1: Natural effect

2: Emphasized effect

OFF: No effect (Initial setting)

Press [RETURN] to exit the menu.

NOTES:

. When playing back 96kHz with Virtual Surround func-

tion, the sound will be down sampled at 48kHz and

output as digital audio.

(for CD play only)

. Virtual Surround System will be effective only when

you set the sound mode to "STEREO". (Refer to

"STEREO SOUND MODE" on page 25.)

You can begin playback at a specific track, title,

chapter or from a specific point on a disc.

TRACK SEARCH [C._

1 repeatedly until SEARCHDuringplayback, press [MODE] /_......................; _2_0;_................................1

menu appears.

2 Within 60 seconds, use the Number buttons to

select the desired track number. Playback will

start from the selected track.

NOTES:

. For single digit press [0] first, if the total track of the

disc is 10 tracks or more.

. During playback or pause, you can also select tracks

by skipping with [1_ / _l] (or [SKIP _ / _'_1] on

the front panel), or entering the desired track number

with the Number buttons.

3 Press [RETURN] to exit the menu.

CHAPTER SEARCH

1 During playback, press

[MODE] repeatedly until

SEARCH menu appears.

2 Use the Number buttons to enter the desired

chapter number. Playback will start at the selected

chapter.

,, Press [CLEAR] to erase the incorrect input.

,, For single digit press [0] first, if the total number of

chapters of the disc is 10 or more.

3 Press [RETURN] to exit the menu.

TITLE SEARCH

1 During playback, press [MODE] repeatedly until

SEARCH menu appears.

2 Use[A / T] to display

TITLE SEARCH menu.

_ C_ARCH_

3 Use the Number buttons to enter the desired title

number. Playback will start at the selected title.

,, Press [CLEAR] to erase the incorrect input.

,, For single digit press [0] first, if the total number of

titles of the disc is 10 or more.

4 Press [RETURN] to exit the menu.

TiMESEARCH

1 During playback, press [MODE] repeatedly until

SEARCH menu appears.

2 Use[A / T] repeatedlyto

display TIME SEARCH menu.

REPEAT TRACK

1 During playback, press

[MODE] repeatedly until

REPEAT menu appears.

3 Within 60 seconds, use the Number buttons to

enter a desired disc time. Playback will start at

the specified time.

, Press [CLEAR] to erase the incorrect input.

,,When there is no need to enter a number, "0"

appears automatically.

4 Press [RETURN] to exit.

MARKER SEARCH _

You can set markers to memorize your favorite

places on a disc.

1 During playback, press [MODE] repeatedly until

SEARCH menu appears.

2 Use[A / T] repeatedlyto

display MARKER SEARCH

menu.

3 Use [-,t / _] to select a marker number among

1 tolO.

4 When the track (or title) reaches your desired

point, press [ENTER] to set a marker.

,,The track (or title) number and S_ =[][]E_B[][][][]B[]

elapsed playing time will appear _'_

on the TV screen.

You can play from the desired point by selecting

the marker number by using [-_1/ I_] and then

pressing [ENTER].

6 To clear a marker, select the marker number and

press [CLEAR]. To clear all markers at once,

select "AC" with [-_1/_] and press [ENTER].

NOTE:

, Thefollowing operation will also erase aftmarkers:

- Opening the disc tray

- Turningoff the power

- Pressing [SELECT]

7 Press [RETURN] to exit the menu.

2 Use [A / Y] to select your desired repeat mode.

,, OFF: Repeat function off

TRACK: Current track repeat

ALL: All track repeat

NOTE:

, Repeat Tracksetting will be cleared when moving to

other track.

3 Press [RETURN] to exit the menu.

REPEAT TITLE / CHAPTER

During playback, press

[MODE] repeatedly until

REPEAT menu appears.

2 Use [_ / _] to select your desired repeat mode.

,, OFF: Repeat function off

CHAPTER: Current chapter repeat

TITLE: Current title repeat

NOTES:

* Repeat Tide/Chapteris not available in some scenes.

, The REPEATsetting will be cleared when moving to

other tide or chapter.

3 Press [RETURN] to exit the menu.

REPEAT A-B _ [_J_

1 Press [MODE] repeatedly until i ............

A-B REPEAT menu appears.

2 Press [ENTER] at your desired

starting point (A).

To cancel it, press [CLEAR].

3 Press [ENTER] again at your

desired ending point (B).

The repeat sequence begins.

To exit the sequence, follow step1 and press

[ENTER] repeatedly until "OFF" appears and

press [RETURN] to exit the menu.

NOTES:

. The A-B repeat section can be set only within the cur-

rent title (for DVDs) or current track (for Audio CDs).

. A-B repeat is not available with some scenes in DVD.

. A-B repeat playback is not available during other

repeat playback.

F-

._1

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

You can determine the playing order of tracks. I_

1 In the stop mode, press [MODE].

* The PROGRAM screen appears.

2 Use[A / T] to select a track,

then press [ENTER].

NOTES:

, Up to 99 tracks can be entered.

, Press[CLEAR] to erase the

most recently entered track.

PRCGR_I I

. If you enter more than 8 tracks, you can change pages

of the program list with D_l,q/ I_1].

. To erase aft tracks in the program at once, select "ALL

CLEAR" at the bottom of the track list.

3 Repeat step 2 until you select all the tracks you

want to play in the program.

4 Press [PLAY I_] to play the programmed tracks.

5 Press [STOP In] to temporarily stop the playback.

You can resume the playback by pressing

[PLAY I_].

Press [STOP III] twice to cancel the pro-

grammed playback.

NOTE:

, REPEAT settingis availableduring programmed

playback. (Refer to "REPEATTRACK"on page 27.)

This function shuffles the playing order of [_j

tracks.

In the stop mode, press

[MODE] twice.

* The RANDOM screen appears.

RANDOM

2 Press [PLAY I_] to start random playback.

NOTE:

, REPEATsetting is availableduring random playback.

(Refer to "REPEATTRACK" on page 27.)

3 Press [STOP In] to stop random playback.

:REEN INFORMATION

You can check the information about the current disc by pressing [DISPLAY]. _ IL_

For DVD-Videos For Audio CDs

1 Press [DISPLAY] during playback to show cur-

rent Chapter.

,,The elapsed and remaining

playing time of the current

chapter will be displayed.

2 Press [DISPLAY] again to show current Title.

,,The elapsed and remaining

playing time of the current title _I_ 000!0-,_ _,_i

will be displayed.

n mmm_mmm_T LI _ _-

3 Press [DISPLAY] agai . [_

* The bit rate and the current

repeat setting will be displayed. |

* If you are playing a dual layered disc, the layer

number will also be displayed.

(LO: Layer 0 is playing. L1: Layer 1 is playing).

1 Press [DISPLAY] during playback to show the

current Track.

* The elapsed and remaining _

playing time of the current

track will be displayed.

2 Press [DISPLAY] again to show current Total

Track. =_

,,The elapsed and remaining

playing time of the total track

will be displayed.

When in the PROGRAM

mode or RANDOM

mode.

3 Press [DISPLAY] again to exit.

4 Press [DISPLAY] again to exit.

A,G,,GT,EOVOSETUP,TEMS

You can change the DVD player's settings by pressing [SET-UP] in DVD mode.

The set up items are shown in the diagram below.

Press [SET-UP] twice

L QUICK J L CUSTOM J l INITIALIZE

--TV MODE

-- DOLBY DIGITAL

LANGUAGE (p29)

]-_ AUDIO

SUBTITLE

DISC MENU

DISPLAY (p30) IT TV MODE

STILL MODE

AUDIO (p30)

PARENTAL (p30)

OTHERS (p31)

]_ DRC I--

DOWN SAMPLING D.

DOLBY DIGITAL

I'-

]T "'

PARENTAL LEVEL O0

PASSWORD CHANGE a

I_- ANGLE ICON

AUTO POWER OFF LU

'1-

I--

1 In the stop mode, press

[SET-UP] twice to display the

DVD SETUP menu.

NOTES:

, Pressing [SET-UP] once will

show TV/VCR SETUP menu partlj4

, If the menu does not appear, press [STOP []] first.

Make sure the unit is in DVD mode before setting.

2 Use[A / T[ toselect "CUSTOM", then press

[ENTER[.

3 Use [A / Y] to select the

desired item, then press

[ENTER].

Refer to the pages below for

continuation to set up each item.

,, LANGUAGE setting: P29 []

,, DISPLAY setting: P30 []

,,AUDIO setting: P30 []

,, PARENTAL setting: P30 []

,, OTHERS setting: P31 []

[]LANGOAGESETTING

4 Use [A / Y] to select the .... _ t_

desired item, then press ,_ ,O_,G,NAL _'"

SL]BTIT_E OFF

[ENTER[. ° ..............

,,AUDIO: Sets the audio language. ._

,, SUBTITLE: Sets the subtitle language.

,, DISC MENU: Sets the language for DVD menu.

5 Use [A / Y] to select your desired language

from the list, then press [ENTER[.

Press [SET-UP] to exit the menu.

NOTES:

, If your desired language is not

on the list, select "OTHER" and

enter the code of the language.

(Refer to "LANGUAGE CODE

LIST" on page 35.)

, This feature may not be valid due to default setting

of the disc. In this case, press [MODE] to select the

language. (Refer to "AUDIO MENU" on page 25.)

, If you select a language that is not supported by the

disc, subtitle will be "OFF" automatically and the

default language of the disc will be selected.

, To change the language for the on-screen menus,

call up the TV/VCR SETUP menu by pressing

[SET-UP] once and set the language. (Refer to "ON-

SCREEN MENU LANGUAGE" on page 11.)

LI,J

r¢

(1)

CHANGINGTHEDVDSETUPiTEMS

[] DISPLAY SETT!NG [] AUDIO SETTING

4 Use [A / Y] to select an item,

then press [ENTER].

,,TV MODE:

You can change certain aspects of the DVD display

screens and on-screen messages on the TV screen.

,,4:3 LETTER BOX (default):

To show black bars on top and

bottom of the screen.

,,4:3 PAN & SCAN:

To show a full height picture with both sides

trimmed.

NOTE:

, Youcan access this setting directly by selecting

"QUICK" at step 2 on page 29.

,, STILL MODE:

This function allows you to adjust picture resolution

and quality in the still mode.

,,AUTO (default):

Automatically select the best

resolution setting (FRAME or FIELD) based on

the data characteristics of the pictures.

,, FIELD:

Select "FIELD" when the pictures are still unstable

even if "AUTO" is selected. FIELD stabilizes the

pictures, although the picture quality may become

coarse due to the limited amount of data.

,, FRAME:

Select "FRAME" to display relatively motionless

pictures in higher resolution. FRAME improves

the picture quality, although it may unstabilize the

pictures due to simultaneous output of two field

data.

5 Press [SET-UP] to exit the menu.

Choose the appropriate Audio settings for your

equipment as it only affects during the playback of

DVD discs.

4 Use [A / Y] to select an item,

then press [ENTER] repeated-

ly until your desired setting

appears.

,, DRC (Dynamic Range Control):

,,ON : To compress the range of soft to loud sound.

(default)

,,OFF : Output the original sound.

,, DOWN SAMPLING:

,,ON : Output in 48kHz. (default)

,,OFF : Output the original sound.

NOTE:

° Whenplaying a disc with copyright protection, the

sound will be output at 48kHz evenif the setting is

"OFF".

,, DOLBY DIGITAL:

" BITSTREAM: Output a Dolby Digital signal.

(default)

,, PCM: Convert the Dolby Digital to PCM.

(2 channel stereo)

NOTES:

, Youcan access thissetting directly by selecting

"QUICK"at step 2 on page 29.

, Set to "BITSTREAM" when the unit is connected to

a Dolby Digital Decoder.

5 Press [SET-UP] to exit the menu.

[]PARENTAL SETTING

This feature allows you to set the rating level of your

DVD discs. Playback will stop if the disc ratings

exceed the level you set.

PARENTAL LEVEL

4 Enter four-digit password with

the Number buttons, then

press [ENTER].

NOTE:

, Enter any 4 digits (except for 4737) to set the pass-

word for the first time, and record it for your memorj4

5 Use [,_,/ V] to select

"PARENTAL LEVEL", then

press [ENTER].

[]OTHERS SETTING

6 Use [_, / T] to select the

desired level, then press

[ENTER].

7 Press [SET-UP] to exit the menu.

CONTROL LEVELS

. ALL: All parental locks are cancelled.

.8 [ADULT]: DVD software of any grade

(adult/general/children) can be played back.

.7 to 2: Only DVD software intended for general

use and children can be played back.

,,1 [KID SAFE]: Only DVD software intended for

children can be played back, with those intended

for adult and general use prohibited.

NOTE:

, Withsome DVDs, it may be difficult to find if they are

compatible with parental lock. Be sure tocheck if the

parental lock function operates in the waythat you

haveset.

PASSWORD CHANGE

4 Enter current password with

the Number buttons, then

press [ENTER].

4 Use [A / Y] to select an item,

then press [ENTER] repeated-

ly to set the feature "ON" or

"OFF".

,,ANGLE ICON:

. ON: To show the angle icon when multiple

camera angles are available during DVD

playback. (default)

. OFF: To keep angle icon from the display.

,,AUTO POWER OFF:

. ON: To activate screen saver program and turn

off the unit automatically. (default)

. OFF: To deactivate Auto Power Off function.

NOTE:

* The screen saverprogram starts when there is no

inputfrom the unit for 5 minutes in the stop mode.

After the screen saverprogram is activated for 15

minutes, the power is automatically turned off.

5 Press [SET-UP] to exit the menu.

5 Use [A, / T] to select

"PASSWORD CHANGE", then

press [ENTER].

6 Enter four-digit password with

the Number buttons, then

press [ENTER].

7 Press [SET-UP] to exit the menu.

NOTE:

*If you forget the current password, enter 4737 first,

then enter your new password.

The former password will be cleared and parental

level will be set to "ALL" (default).

This allows you to return all items of _-_VJ

SETUP menu (except for PARENTAL

setting and menu language) to their default settings.

1 In the stop mode, press [SET-UP] twice to

display the DVD SETUP menu.

2 Use [A / T] to select

"INITIALIZE", then press

[ENTER].

Use [_, / V] to select "YES",

then press [ENTER] twice.

,,To cancel the initialization,

select "NO".

4 Press [SET-UP] to exit the menu.

F-

-I'-

IOUBLESHOOTING GUIDE

if the unit does not perform properly when operated as instructed in this Owner's Manual, check the following

guide for the possible remedy of a problem before contacting the Customer Service. Sometimes a perfor-

mance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. It

could save your time and money.

"-4

('b

Poor or no picture

SYMPTOM POSSIBLE REMEDY PAGE

No power ,,Make sure the power plug is connected to an AC outlet. 9

,,(In case of power failure) Check the breaker. --

No operation by remote control ,,Check if the batteries are weak or inserted incorrectly. 7

Replace weak batteries and insert with their polarities (+/-

signs) as indicated.

,,Aim the remote control at the remote sensor and operate

within 23 feet (7 m) of the unit.

,,Remove all obstacles to clear the path of the infrared signal.

,,Check the infrared signal output.

,,Select the correct mode to operate by pressing [SELECT].

,,The operable range from the unit is 10 feet (3m) within 15°.

,,Check if antenna or cable is connected properly.

,,Check for the broken pin or wire of antenna cable.

,,Check for source of reception disturbance.

,,Press [SELECT] to select the correct mode.

,,Perform channel scanning to memorize available TV channels.

,,Try another channel. If OK, then possible station problem.

,,Adjust picture control (COLOR/CONTRAST/BRIGHT etc.).

,,Check for magnetism from nearby appliances and try

degaussing.

Poor or no picture in playback ,,Adjust tracking control. 15

,,Try video head cleaning. 34

,,The videotape may be old or worn. Replace with new one. --

Poor or no sound ,,Adjust volume control using [VOL. _ / V]. --

,,Try another channel. If OK, then possible station problem. --

,,Check if the unit is in Still mode or Slow motion playback. 15

If so, press [PLAY P,-] to return to normal playback.

Cannot go into recording mode ,,Make sure the cassette has an erase-prevention tab. If neces- 15

sary, cover the hole with plastic tape.

Timer recording does not work ,,Make sure the begin/end time is set correctly.

or results in failure ,,Make sure the power is off to activate timer recording.

,,Check if the unit's clock is set to current time and date.

,,The program may contain copy protection signals that restricts

copying.

,,The timer setting overlapped with another setting has priority.

,,Check if the tape reached the end during recording.

,,Check if the power failure during recording.

,,You cannot copy a copyrighted videotape. You are experienc-

ing copy guard protection.

Picture or color fades in and out

when copying a videotape

SYMPTOM POSSIBLE REMEDY PAGE

---4 Misspelling in captions ,, Error committed by the closed captioning production company. --

,_ ,, Possible in a live broadcast. Not in case of a prerecorded pro- --

gram.

Text is not shown in its entirety ,, A few seconds of delay is common for live broadcast. --

or a delay occurs from what is If a dialogue exceeds the display capacity (220 words per

O_ being said minute), selective editing is used so that the captions remain

O_ upqo-date with the current TV screen dialogue.

Captions scrambled with white ,, Caused by interferences of building, power lines, thunder- --

boxes storms, etc.

No captions in a program which ,,The broadcast may use a time compression process to speed --

must contain closed caption up the program. The decoder cannot read the compressed

information and captions will be lost.

No captions in a pre-recorded ,, Possibility of a illegal copy or an erroneous copying process --

videotape with indicated closed accidentally performed by the fabricator.

captions included

Black box in the TV screen ,,You are in TEXT mode. Select CAPTION mode or "OFF". 11

No picture ,,This unit cannot play DVD-RAM/CD-i/Photo CD/Video 22

<_ CD/DVD with region codes other than "1 and "ALL".

E3 Disc cannot be played ,, Clean the disc. 34

,, Place the disc correctly, with the label side up. 23

O_ ,, Cancel the parental setting or change the control level. 30

No sound ,, Correct the audio output settings. 30

,, Confirm the power and audio settings of external audio corn- --

ponent.

No DTS audio is output ,, This unit does not support DTS audio. This is not a malfunc- --

tion.

Distorted picture ,, During the playback of a 2-layered disc, pictures may stop for --

a moment. This happens while the 1st layer is being switched

to the 2nd layer. This is not a malfunction.

,,This happens right after fast forwarding or rewinding. --

Audio or subtitle language does ,,The selected language is not available for audio or subtitle on 29

not match the setting the DVD.

The camera angle cannot be ,,The DVD does not contain sequences recorded from different 25

changed camera angles.

Audio or subtitle language can- ,,The DVD does not contain audio source or subtitles in the 29

not be changed selected language.

"Prohibited icon" appears on the ,,That operation is not available by the unit or the disc. 23

screen

CD/DVD sound dropout ,, Scratched disc. Replace with an unscratched one. --

No CD/DVD reproduction

DVD picture poor

NOTES:

. Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner's

Manual for details on correct operations.

. Playback from a desired track and random playback are not available during playback.

MAINTENANCE

DEGAUSSING

A degaussing circuit in this unit clears up color

errors on the TV screen. Color errors occur when

there is any excess magnetism close to the unit.

This circuit is designed to operate once when the

unit is first plugged in. If you see minor color

errors on the screen, unplug the unit for approx-

imately 30 minutes. When you plug the unit again,

the degaussing circuit will operate to clear errors.

Take this step any time the TV screen is accidental-

ly magnetized or when you move the unit.

AUTO HEAD CLEANING

,,Automatically cleans video heads as you insert or

remove a cassette, so you can see a clearer pic-

ture.

, Playback picture may become blurred or interrupt-

ed while the TV program reception is clear. Dirt

accumulated on the video heads after long peri-

ods of use or the usage of rental or worn tapes

can cause this problem.

If a streaky or snowy picture appears during play-

back, the video heads in your unit may need to be

cleaned.

1. Please visit your local Audio/Video store and pur-

chase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the prob-

lem, please call our help line mentioned on the

front page, to locate an Authorized Service

Center.

NOTES:

* Remember to read the instructions included with the

video head cleaner before use.

* Clean video heads only when problems occur.

CABINET CLEANING

,,Wipe the front panel and other exterior surfaces of

the unit with a soft cloth immersed in lukewarm

water and wrung dry.

,,Never use a solvent or alcohol. Do not spray

insecticide liquid near the unit. Such chemicals

may cause damage and discoloration to the

exposed surfaces.

SERViCiNG

,,Should your unit become inoperative, do not try to

correct the problem by yourself. There are no

user-serviceable parts inside. Turn off, unplug the

power cord and please call our help line men-

tioned on the front page, to locate an Authorized

Service Center.

IR SIGNAL CHECK

Use the AM radio or the digital camera to check if

the remote control properly sends out the infrared

signal. It will help to define the cause of malfunction.

Usinq AM radio .. _

. Tunethe AM radio to no broadcasting band.

Press any button on remote control toward

the radio. If the radio receives the signal

from remote control properly, the sound wifl

flutter.

Usinq diqital camera

(including built=in camera of cellular

phone)

. Press and hold any button on remote control

toward a digital camera. Theremote control is

working if you confirm infrared fight through the

digital camera.

IF THE LASER OPTICAL PICKUP UNiT IS

DIRTY

,,if the unit still does not perform properly when it is

operated, while referring to the relevant sections

and to "TROUBLESHOOTING GUIDE" in this

Owner's Manual, the laser optical pickup unit may

be dirty. Consult your dealer or an Authorized

Service Center for inspection and cleaning of the

laser optical pickup unit.

DiSC HANDLING

,,Handle the discs so that fingerprints and dust do

not adhere to the surfaces of the discs.

,,Always store the disc in its protective case when it

is not used.

,,To clean-off, use a soft cloth. ._(/_ _-

,,Do not use a hard cloth since this

will mar the disc.

,,Wipe the disc in a straight line from center to edge.

,,Never wipe with a circular motion.

,,Do not use detergent or abrasive clean-

ing agents.

IfyousubscribetocableTV,thechannelsaredisplayedas1-125.Cablecompaniesoftendesignatechannels

withlettersorletter-numbercombinations.Pleasecheckwithyourlocalcablecompany.Thefollowingisa

chartofcommoncablechanneldesignations.

CATV channel 5A 2 3 4 5 6 7 8 9 10 11 12 13 A B

TV Display 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CATV channel C D E F G H I J K L M N O P Q

TV Display 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

CATV channel R S T U V W W+I W+2 W+3 W+4 W+5 W+6 W+7 W+8 W+9

TV Display 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

CATVchannel W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24

TV Display 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

CATVchannel W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39

TV Display 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

CATV channel W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54

TV Display 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

CATV channel W+55 W+56 W+57 W+58 A-5 A-4 A-3 A-2 A-1 W+59 W+60 W+61 W+62 W+63 W+64

TV Display 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105

CATV channel W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79

TV Display 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120

CATV channel W+80 W+81 W+82 W+83 W+84

TV Display 121 122 123 124 125

L z

Language Code

A-B

Abkhazian 4748

Afar 4747

Afrikaans 4752

Albanian 6563

Amharic 4759

Arabic 4764

Armenian 5471

Assamese 4765

Aymara 4771

Azerbaijani 4772

Bashkir 4847

Basque 5167

Bengali;Bangla 4860

Bhutani 5072

Bihari 4854

Bislama 4855

Breton 4864

Bulgarian 4883

Burmese 5971

Byelorussian 4851

C-E

Cambodian 5759

Catalan 4947

Chinese [CHI] 7254

Corsican 4961

Croatian 5464

Czech [CZE] 4965

Language Code

German [GER] 5051

Greek [GRE] 5158

Greenlandic 5758

Guarani 5360

Gujarati 5367

Hausa 5447

Hebrew 5569

Hindi 5485

Hungarian [HUN] 5467

I-K

Icelandic [ICE] 5565

Indonesian 5560

Interlingua 5547

Interlingue 5551

Inupiak 5557

Irish [IRI] 5347

Italian [ITA] 5566

Japanese [JPN] 5647

Javanese 5669

Kannada 5760

Kashmiri 5765

Kazakh 5757

Kinyarwanda 6469

Kirghiz 5771

Kirundi 6460

Korean [KOR] 5761

Kurdish 5767

L-N

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

F-H

Faroese

Fiji

Finnish [FIN]

French [FRE]

Frisian

Galician

Georgian

5047 Laothian

6058 Latin

5160 Latvian;Lettish

5161 Lingala

5166 Lithuanian

Macedonian

5261 Malagasy

5256 Malay

5255 Malayalam

5264 Maltese

5271 Maori

5358 Marathi

5747 Moldavian

5861

5847

5868

5860

5866

5987

5983

5968

5958

5966

5955

5964

5961

Language Code

Mongolian 5960

Nauru 6047

Nepali 6051

Norwegian [NOR] 6061

O-R

Occitan 6149

Oriya 6164

Oromo(Afan) 6159

Panjabi 6247

Pashto;Pushto 6265

Persian 8247

Polish [POL] 6258

Portuguese [POR] 6266

Quechua 6367

Rhaeto-momance 6489

Language

Somali

Spanish [SPA]

Sundanese

Swahili

Swedish [SWE]

iagalog

iajik

Tamil

Tatar

ielugu

Thai

Tibetan

iigrinya

Tonga

Romanian [RUM]

Russian [RUS]

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

Serbo-Oroatian

Sesotho

Setswana

Shona

Sindhi

Singhalese

Siswat

Slovak

Slovenian

6461 Tsonga

6467 Turkish [TUR]

Turkmen

6559 Twi

6553 U-Z

6547 Ukrainian

5350 Urdu

6564 Uzbek

6554 Vietnamese

6566 Volapuk

6660 Welsh

6560 Wolof

6550 Xhosa

6585 Yiddish

6565 Yoruba

6557 Zulu

6558

Code

6561

5165

6567

6569

6568

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

If you choose a language that has a 3 letter language

code, the code will be displayed every time you change

the AUDIO or SUBTITLE language setting. If you

choose any other languages, '---' will be displayed

instead. (3 letter language code is written in bracket.)

GENERAL SPECIFICATIONS

TV/VCRI

CRT:

Television system:

Closed caption system:

Video Heads:

Tape width:

Tape speed

SP:

LP:

SLP:

Tuner channel

TV VHF Low:

TV VHF High:

TV UHF:

CATV

VHF:

MID band:

SUPER band:

HYPER band:

20 inch in-line gun,

900 deflection tube

NTSC-M

§15.119/FCC

Rotary four-head

1/2 inch

33.40 mm/sec.

16.67 mm/sec.

11.12 mm/sec.

#2-#6

#7-#13

#14-#69

A5-A1, A-I

J-W

W+I -W+84

Product type: DVD Player

Discs: DVD video, Audio CD

Output signal format: NTSC color

ELECTRICAL SPECIFICATIONS

I Sound output: [ 2 speakers,1W,8 ohm I

OTHER SPECiFiCATiONS

Terminals

Antenna input:

Video input:

Audio L/R input:

Headphone:

Coaxial digital

audio output:

VHF/UHF/CATV

75 ohm unbalanced

(F-type)

RCA connector x 1

RCA connector x 2

1/8" stereo (3.5 mm)

One pin jack,

500 m Vpp (75 ohm)

Digital encoded

infrared light system

5°C to 40°C

(41°F-104°F)

AC 120 V, 60 Hz

9OW

Remote control:

Operating temperature:

Power requirements:

Power consumption

(Maximum):

Picture tube: 20"

Dimensions: H: 20-3/16" (513 mm)

W:22-1/8" (562 mm)

D: 19-7/8" (505 mm)

Weight: 51.1 Ibs. (23.2 kg)

Designs and specifications are subject to change without notice.

if there is a discrepancy between languages, the default language will be English.

PREPARATIVES PARA EL use ............ 37

CONEXIONES DE ANTENA/CABLE ........... 37

CONEXION A UN DISPOSITIVO EXTERNO

(FRONTAL) ............................ 38

CONEXION A UN DISPOSITIVO DE AUDIO DIGITAL

(TRASERA) ............................ 38

REPRODUCCION ....................... 41

REPRODUCCION B_,SICA .................. 41

G RABAClON ........................... 41

GRABACION NORMAL ..................... 41

GRABACION CON TEMPORIZADOR

AUTOMATICO .......................... 42

FUNCIONAMIENTO Y AJUSTES DEL

TELEVISOR .......................... 39

PARA VER UN PROGRAMA DE TELEVISION .... 39

AJUSTE DEL RELOJ ...................... 39

AJUSTE DE CANAL ....................... 40

IDIOMA DE MEN0 DE PANTALLA ............. 40

REPRODUCCION B_,SICA .................. 43

MEN0 DE DISCO/MEN0 DE TiTULO .......... 43

EPARATIVOS PARA EL use

Enchufe el cable entrante en la toma ANT., en la parte trasera de la unidad.

Si su servicio de cable le suministra una caja convertidora o si usted utiliza un sistema de satelite, conecte

la caja con esta unidad, come se indica a continuaciOn.

Cable entrante desde empresa de cable sehales cifradas y requieren un convertidor

o antena de sat_lite especial para recibir estos canales.

Consulte con su empresa de cable local.

==1

1€

I.LI

NOTA:

Antes de enchufar la antena en la

tema ANT de/a unidad, eompruebe

que la pati/la no esta dob/ada. Si

esta dob/ada, endereee la pati/la

come se indica en /a i/ustracion y

enehufe /a pati//a a/a toma ANT de

/a unidad.

Patilla doblada

Cable Enchufe

(Debe set

enderezada)

(Patilla recta)

Para su seguridad y

para evJtar daSos en la

unidad, desenchufe el

cable de la antena de la

toma ANT. antes de

mover la unidad.

PREPARATIVOS PARA EL USO

Cuando vea un programa grabado en otra fuente (videograbadora o videocb_mara), utilice

las tomas de entrada AUDIO/VIDEO en la parte frontal de la unidad.

Conecte las tomas de salida de Audio/Video de otra fuente alas tomas AUDIO L/R y

VIDEO de esta unidad.

A continuacion, utilice [SELECT] o [CH. A /V] hasta que aparezca "AUX" en la pantalla.

AUX

(SALIDA)

Pot ejemplo,

videograbadora o

vid_

...... 1

_ _ __ _ _ [_1d;.715_ ..............

_-_ Parte frontal de

Alas tomas de salida de audio _(EN unidad

(SALIDA) Cable de audio --TRADA)I

(disponible en el mercado) ......................

A la toma de salida de video _ _. __._

• d-NImDA)

Cable de video (disponible en el mercado)

NOTA:

Cuando conecte una videograbadora monoaural (otra fuente) a esta unidad, conecte /a toma de salida de audio de/a

videograbadora monoaura/ (otra fuente) a/a toma AUDIO L de esta unidad. El sonido sa/dM igua/mente por ambos

cana/es L y R (izquierdo y derecho).

Puede conectar esta unidad a un dispositivo de audio digital para disfrutar del sonido digital de DVD.

Conecte a un amplificador equipado con tomas de entrada digital, tales como una platina MD o DAT. Para

reproducir un disco DVD en un formato ambiental multicanal Dolby Digital en esta unidad, conectela a un

decodificador Dolby Digital.

Utilice un cable coaxial digital de audio (disponible en el mercado) para las conexiones de audio.

A la toma de entrada de

_ ........ IOgOQI=_=IOODOODOlOOlOOI=_=OQIDglDg___......

A la toma AUDIO

(SALIDA) _ A LlaTt(CrOAX,A L

L_ /S°larf_ente DVD

p_#_ AUDIO OUT)

Cable de audio coaxial digital

(disponible en el mercado)

PIatina MD,

pIatina DAT, etc. A [a toma de entrada de

D q_[]_ audi ...... ial digital

(ENTRADA)

NOTAS:

oLa fuente de audio de un disco en formato ambienta/mu/ticana/Do/by Digital no puede sergrabado como sonido digital

por una p/atina MD o DAT

oAseg_rese de apagar todos los dispositivos del sistema antes de conectar otro dispositivo.

oDonsulte los manuales del usuario de los dispositivos que van a conectarse a la unidad.

oPara conectar a una platina MD o DAT, ajuste "DOLBY DIGITAL" en "PCM" para la salida de audio en el modo de

ajuste, y para conectar a un decodificador Dolby Digital, ajuste en "BITSTREAM" (consulte "AUDIO SETTING" en

pagina 30). Utilizar una unidad con unos ajustes incorrectos puede generar distorsion de ruido y puede asimismo dahar

los altavoces.

)NAMIENTO Y AJUSTES DEL TELEVISOR

PARA_EB UN EROGBAMA DETELEVIS!ON

1 Despues de finalizar la conexidn de la

antena o del cable, conecte el cable de

alimentacidn a una toma estandar de

CA.

2 Presione [POWER] para encender la unidad.

3 Utilice [CN. ,_ / T] o los botones numericos

para seleccionar el numero de canal deseado.

Para utilizar los botones num_ricos

,Canales de un d/gito: (Ej.: 02, 03, 04, etc.)

Presione primero [0] para seleccionar un canal de un

d/gito.

,Canales de dos d/gitos: (Ej.: 12,3& 95 ...)

Presione dos d/gitos directamente.

,Canales de tres d/gitos: (Ej. 115, 125 ...)

Presione primero [+100], y luego presione los #ltimos

dos d/gitos.

4 Utilice [VOL. A / V] para ajustar el volumen.

Presione [MUTE] para

silenciar al instante el sonido ..........

H||||==========

Presione de nuevo para

restaurar el nivel de sonido

anterior.

NOTA:

, Incluso aunque apague la unidad en el modo DVD,

la unidad estarb en el modo TV/VCR cuando vuelva

a encenderse.

PARA VER UN CANAL DE CABLE O SATELITE

Si la unidad est,. conectada a una caja de cable o

de satelite, utilice [CN. _, / V] para seleccionar

CA3 o CA4 segun el ajuste de canal de salida del

dispositivo y seleccionar el canal deseado en dicho

dispositivo.

PARA VER UNA ENTRADA EXTERNA

Cuando un equipo externo este

conectado alas tomas de entrada AUX

frontales AUDIO/VIDEO, presione

[SELECT] o [OH. ,& / v]

repetidamente hasta que

aparezca "AUX" en la pantalla.

NOTA:

, Si no hay entrada de sehal del terminal de antena ni

se hace funcionar durante 15minutos,el TV se

apagara automaticamente.

AJ U,STE,,,DE BE_O J ,,,

Ajuste correctamente el reloj de la

unidad para grabaci6n con temporizador _;_;:;

para videograbadora. Se sugiere ajustar el reloj _

manualmente cuando se configure por primera vez _

la unidad, y luego fijar el ajuste automatico del reloj

en "ON" para corregir la hora peri6dicamente.

NOTA: _'_

* Si no pude recibir una emisora con/as seha/es

horarias, el ajuste automatico del reloj no estara

disponib/e. Uti/ice #nicamenteel ajuste manual

AJUSTE MANUAL DEL RELOJ

En el siguiente ejemplo, el reloj est_ ajustado en:

FECHA: 5 de mayo de 2006

HORA DE AJUSTE: 5:40PM

1 Presione [SET-UP].

Utilice [A / _] para ir hasta

"AJUSTE RELOJ", y presione

[ENTER].

Tv,_oa PREP

COMOPROGRAMAR

AJUSTERELO_

A_USTEDECANAL

A_USTEDE USER

2 Utilice [A / _] para ir hasta _ ...........

"AJUSTE MANUAL RELOJ", y | ......... [o,_

presione [ENTER]. / ............ [0_]

" F

Si no hay ninguna emisora local .................

PBS en su zona o en su sistema t ........ [O_F]

de cable, seleccione "RELOJ AUT." y presione

[ENTER] para desactivar la funci6n antes de este

paso.

Utilice [A / _] para ajustar los

datos deseados de mes, d[a,

afio, hora y minuto.

Utilice [_1 / _] para pasar a

otro elemento.

AJUSTE MANUAL RELOJ

MES D_A A_O

05 ' 0_WE 2006

HORA M_NUTO

Presione [SET-UP].

Aunque los segundos no se ...... 1

muestran, se comienzan a

contar desde 00 cuando se

presiona [SET-UP]. Utilice esta funci6n para

sincronizar el reloj con la hora correcta.

NOTA:

* Cuando desenchufeel cable de CA o si hay un corte

del suministro e/ectrico durante mas de 3 segundos,

es posib/e que tenga que reajustar el re/oj.

t¢

..J

F-

FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR

Es necesario preseleccionar el canal al

principio o en case de haber movido el

televisor a una zona distinta.

AUTOPROGRAMACION DEL CANAL

1 Presione [SET-UP]. _ ............

OOMO pROGRAMAR

Utilice [A / V] para ir hasta ,_A..........A_USTE DE OANAL

A_USTE DE USER

"AJUSTE DE CANAL", y ........... ,,P

IE_[OMA [ES_ANOL]

T[TULO [OFF]

presione [ENTER].

2 Utilice [A/V] para ir hasta _ A............

"AUTOPROGRAMACION DE _RE_...... _,,__o_,_v_

CA.", y presione [ENTER] ................ o.....

El sintonizador explora y memoriza todos los

canales activos de su zona.

3 Cuando la exploraci6n ha

finalizado, se muestra el canal

memorizado mas bajo.

Si en la pantalla del televisor

aparece "NO HAY SEI_IAL DE

TV", compruebe la conexi6n

de la antena y vuelva a

intentar.

<EJEMPLO> CA 15 1

NOHAYSE_ALDETV

NOTAS:

, La unidad puede reconocer canales de CATV como

canales de TV si el estado de la recepcion es

deficiente. En tal caso, compruebe la conexion de la

antena y vuelva a intentar "AUTOPROGRAMACION

DE CA. ".

,La autoprogramacidn del canal NO es necesaria

cuando est# conectado a una caja de cable o de

$at_lite. Simplemente seleccione el canal para

entrada de caja de cable o de sat_lite (ej. CA3 o

CA4) en la unidad, y seleccione el canal deseado

en la caja de cable o de sat_lite.

Puede seleccionar el idioma del menu

de pantalla entre ingles, espaSol y

frances.

1 Presione [SET-UP].

Utilice [A / V] para ir hasta

"IDIOMA".

I TV;VCR PREP

OOMO PROGRAMAR

AJUSTE RELOJ

AJUSTE DE CANAL

AJUSTE DE USER

AJUSTE d,_ v _c_{;_

IDIOMA eSP4NQL] ....

T_TULO r_FF1

2 Presione [ENTER] repetidamente para

seleccionar "ENGLISH", "ESPANOL" o

"FRAN(_AIS".

3 Presione [SET-UP] para salir del menu.

NOTAS:

, Esta funcion afecta so/amente a/idioma del men# de

panta//a y no a/a fuente de sonido.

. Si por alguna razon el men_ ya esta en ingles o en

frances, presione [SET-UP] y mediante [p,,/ V] vaya

a "LANGUAGE [ENGLISH]" o "LANGAGE

[FRAN_AIS]", y presione [ENTER] repetidamente

para seleccionar el idioma deseado, y presione

[SET-UP].

ABACION

1 Inserte una cinta pregrabada para

encender la unidad

autom#,ticamente (Auto Power

On/ActMdad autom_tica). 11

2 Seleccione el modo TVNCR presionando

[SELECT].

NOTA:

*Si seha quitadola lengdetade protecci6ncontra

borrado,la unidadcambiaraen elmode VCRy

empezaralarepmduccidnautomaticamente.

3 presione [PLAY _].Parainiciar la reproducci6n, [ ...........

NOTA:

*Inelusoen elmode DVD,puede inielar/a reproducel6n

en videograbadorasipresiona[PLAY1_] enel panel

frontal(de/lateral de TV/VCR).

4 presioneParainterrumpir lareproducci6n,[STOp m]. [ .....

5 Para rebobinar la cinta, presione r.........

[REV.q_].

Para hacer avanzar la cinta,

AV RAP[DO

presione [FWD_._-].

Para interrumpir el movimiento de

la cinta, presione [STOP m].

6 Paraexpulsarla cintade la unidad, E........

presione[STOP/EJECTB_] en el

panelfrontal.

AJUSTE DE SEGUIMIENTO

,,El ajustede eeguimientoee estableceraautom&ticamente

al iniciar la reproducci6n(funci6nde seguimientodigital).

,,SiaparecenIineasderuido(rayasnegrasy blancas)enla

imagendereproducci6n,utilice[CH.A / V] hastaquelasrayas

desaparezcan(ajustedeseguimientomanual).Estotambi6n

est_disponibleenel modoPausa/Imagenfija/C_.maralenta.

,,Para desactivar el modo de seguimiento manual, pare

la cinta una vez e inicie de nuevo la reproducci6n.

IMAGEN FIJA

* Durante la reproducci6n, presione [PAUSE 11]

para congelar la imagen.

Puede avanzar la imagen fotograma a fotograma

presionando repetidamente [PAUSE Ill.

* Paradesactivarel modedeimagenfija,presione[PLAY1_].

NOTAS:

, Inserte una elnta de casete con/a/eng_eta de

protecel6n eontra borrado sin quitat:

, Esta unidad no puede grabar el contenido de/DVD

ineorporado.

, SOLAMENTE podra vet el mismo programa de

te/evisi6n que se est@grabando.

1 Utilice [CH. A I'IT]o los

b°t°neSvaseleccionara grabar.nUmeriC°Selcanal donde separa [ CA10 1

NOTA:

, Si/a unided esta conectade a una caja de cable o

de sat@rite,debera estar en CA3o CA,&Selecelone

en /a caja de cameo de sate/iteel canal donde se

vaa grabar.

2 seleccionarPresione[SPEED]parvelocidadde J_

cinta deseada (SP/SLP).

(Consulte "SELECTING TAPE

SPEEDS" en pAgina 15.)

3 Presione [RE(;:] para iniciar la

grabaci6n.

Presione [PAUSE ||] para

interrumpirnuev° oPresi°ne[PAUSEdeseadas.grabaddn[REC]ctetemp°ralmenteescenasn°paral|]dereanudarla ii _

la grabaci6n.

NOTA:

, Si la grabaelon se mantiene en pausa durante mas

de 5 minutos, /a unidad pasara automatieamente a/

modo de grabaelon para que /a elnta no sufra dahos.

5 Presione [STOP m] para interrumpir la

grabaci6n.

CAMARA LENTA

,,Durante la reproducci6n, presione [PAUSE 11] y, a

continuaciSn presione [FWD_,._ ].

,,Paradesactivarel modedecamaralenta,presione[PLAYl_].

NOTA:

, Silaunidadsemantieneenelmodoc_maralentaoimagenfijadurante

m&sde5minutos,entrar_autom_ticamenteend mododeparada.

Puedeajustarochoprogramasparagrabaren

diasconcretos,diariamenteosemanalmente,

dentrodeunperiododeunaSo.

En el siguiente ejemplo, el temporizador estb

ajustado para grabar:

FECHA: 3 de julio de 2006

HORA DE AJUSTE: de7:30PM a 8:50PM

CANAL: CA61

VELOCIDAD DE CINTA: SP

1 Presione [SET-UP]• f .........

COMO PROGRAMAR

Utilice [A / Y] para seleccionar ..........

AJUSTE DE CANAL

A_USTE DE USER

"COMO PROGRAMAR", y ..............

IDIOMA [ENGUSH]

presione [ENTER]•

NOTA:

, Si todavia no ha ajustado el reloj, aparece el men#

"AJUSTEMANUAL RELOJ".Ajuste la hora y la

fechaactuales (consulte "AJUSTE MANUAL DEL

RELOJ"en pagina 39) e inicie el ajuste de la

grabacion con temporizador.

2 Utilice [A / Y] para seleccionar [ .............

• •. -- _ CA FEC_A I_O_O RNAL /

la poslclon ael programa ;::...... |

deseado y presone [1_]. :: :_::::: ::: ::: ::/

3 Utilice [A / y] hasta que f ............. 1

aparezca el nt]mero del canal I=_:_, :,:_ R_ /

deseado y presione [_]. :t :S::::: ::: ::: ::

NOTA:

, Silaunidadestaconectadaauna cajadecableo de

sat61ite,deberaestaren CA3o CA4.Seleccioneen la

cajade cableo desat61iteel canaldondese vaa graba_

4 Ajuste la fecha de inicio.

Para una _Jnica grabacion :

Presione [A] hasta que

aparezca la fecha deseada. A

continuaci6n, presione [_].

Para una grabacion cada dia :

Paragrabar el mismo canal a la

misma hora cada dia.

Presione [T] hasta que

aparezca "CADA DiA", y

presione [1_].

Para una grabacion semanal :

Paragrabar el mismo canal a/a

misma hora cada semana.

i COMO PROGRAMAR 1

CA F£ClffA ]kqO_O RNAL

[..............1

CA _ ]NIC_O NNAk

6 CADA D_A :-

i COMO PROGRAMAR 1

CA _C_ INIC_O RNAL

Presione [Y] hasta que aparezca "CADA" y su

dfa deseado de la semana (por ejemplo, "Cada

lunes"), y presione [_'-].

5 Utilice[A / T] paraajustarla hora

y el minutodeinicio/findeseados.

Presione[_-] para pasaral

siguienteelemento.

6 Utilice[A /y] hastaqueaparezcala

velocidaddecintadeseada.

(Consulte"SELECTINGTAPESPEEDS"

enpagina15.)

Presione [ENTER] para finalizar el ajuste.

,* Paraajustar otto programa, repita los pasos 2 a 7.

,, Para corregir el programa durante el ajuste,

presione [_1] para retroceder un paso y utilice

[A / Y] para introducir los nOmeros correctos.

,, Presione [SET-UP] para salir del menQ.

Presione [POWER] para ajustar la grabaciOn

con temporizador automAtico.

El indicador de grabaci6n se enciende.

NOTAS:

. DEBE apagar/a unidad para aetivar/a grabacidn

con temporizador automatieo.

. Sinoseapagalaunidady sigue

ustedviendola televisi6n,"PRG.

i i ii _ i

ESTARLISTO"empiezaaparpadear PRGES*AnUS70

enlapantalladeltelevisor2minutes ....

antesdela heradeinicioprogramada.

, AsegElresede insertar una cinta con tengbetade

proteccidn contra borradoantes de apagar taunidad.

Si tacinta no tiene tatengbeta,sera exputsada

cuando sepresione [POWER] para apagar.

En la hora de inicio programada, la unidad

empieza a grabar.

NOTA$:

. La grabacion comienza sin encenderse/a pantafla

del televisor.

. Durante/a grabaeion, puede ver so/amente el

programa de television que se este grabando

actua/mente o una reproduecion de DVD.

Presione [POWER] y [SELECT] para se/eeeionar el

modo deseado.

. Si la cintase acabaantesdelahoradefinalizaci6n,lagrabaci6n

se interrumpeinmediatamentey la cintaes expulsada.

PARA CONFIRMAR EL PROGRAIVIA

1 Presione [POWER] para encender la unidad.

(El indicador de grabaci6n se apaga.)

2 Presione [SET-UP].

Utilice [A / Y] para seleccionar "COMO

PROGRAMAR", y presione [ENTER]•

3 Confirme los detalles de los programas que

aparecen en la pantalla del televisor•

4 Presione [SET-UP] para salir del menu.

1 Presione[POWER]para

encenderlaunidad.

2 Presione [OPEN/CLOSE ,_] en la unidad.

3 Coloque el disco en la

bandeja, con la etiqueta hacia

arriba.

4 Presione [PLAY I_].

,, La bandeja se cerrara autom#,ticamente y se

empezara, la reproducci6n. Cuando reproduzca un

DVD que incluya un ment_ de fitulos, este menu

puede aparecer en pantalla.

NOTAS:

, Cerrar la bandeja del disco manualmente o

presionando [OPEN/CLOSE _,] tambi#n inicia la

reproduccion.

, Con discos DVD que utilicen titulos para sehales de

programa de reproduccion, la reproduccion puede

comenzar desde el segundo titulo o puede omitir

dichos titulos.

5 Para congelar la imagen, presione [PAUSE ||]

durante la reproducci6n.

NOTA:

, El sonido se silenciara en modo de pausa.

6 Presione [STOP m] para

interrumpir temporalmente la

reproducci6n.

,, Presione [PLAY I_] para

reanudar la reproducci6n.

,, Para cancelar la reanudaci6n y

• )

parar el disco, presione [STOP In] de nuevo.

NOTAS:

, La informacion de reanudacion se conserva aunque

se apague la unidad.

, Puede aparecer un "icono _b_

prohibido" en /a zona superior

derecha de/a panta//a de/

televisor durante /a operacion.Esto significa que /a

operacion no esta disponib/e en el disco.

REPRODUCCION PASO A PASO

,,Durante la reproducci6n, presione _,_-.V_

[PAUSE | |].

Puede avanzar la imagen fotograma a fotograma

presionando repetidamente [PAUSE | 1].

,,Para volver a la reproducci6n normal, presione

[PLAY _].

AVANCE RAPIDO / RETROCESO RAPIDO

" Durante la reproducci6n, mantenga _

presionado [FWD I1,_-]para avance

ra.pido o [REV .,_1'_]para retroceso rapido.

,,Cada vez que mantenga [ _,_]

presionado el bot6n, la

reproducci6n se acelera y el

nivel de velocidad aparece en la pantalla.

NOTAS:

* EnlosdiscosDVD,/avelocidaddeavance/retroceso

r_pidoes diferentesegdnel disco.La ve/ocidad

aproximadaes 1(x2),2 (x8),3 (x20),4 (xSO)y 5 (×100).

, En discos de CD de audio/a velocidadaproximada

es 1 (x2), 2 (x8) y 3 (x30).

* Cuando uti/ice losbotones de/panel frontal, uti/ice

[SEARCH _ / _,*].

" Paravolvera la reproducci6nnormal,presione[PLAY_].

AVANCE LENTO / RETROCESO LENTO

,,Durantela reproducci6n,presione[PAUSE||]. =_._-_W

,,Mantenga presionado [FWD I1_] para

avance lento o [REV .,11_1]para retroceso lento.

,,Cada vez que mantenga [ i;i1

presionado el bot6n, la

reproducci6n se ralentiza y el

nivel de velocidad aparece en la pantalla.

NOTAS:

, La velocidad de avance/retrocesolento varia seg_n

el disco. La ve/ocidadaproximada es 1 (1/16), 2

(1/8)y 3 (1/2).

, Cuando uti/ice los botones de/a unidad principal,

uti/ice[SEARCH _ / _*].

" Para volver a la reproducci6n normal, presione

[PLAY _].

Un DVD puede contener menus para explorar

el disco y acceder a funciones especiales.

1 Presione [DISC MENU] o [TITLE].

,,Aparecera. el menu principal/menu de titulo del DVD.

,,Puede activar el menL_incluso durante la reproducci6n.

2 Utilice [A / _ / _ / 1_] para seleccionar un

elemento y presione [ENTER].

NOTAS:

, SIel disco tieneun men# de disco, apareceran

distintasopciones de seleccion: idioma de sonido,

subtftu/os,capftu/os del tftu/oy otras.

, El contenido de/men# y/as correspondientes

operacionesde men# pueden variar seg#n los

discos. Paramas deta//es,consu/te el manual que

acompahael disco.

SYLVANIA

LiMiTED WARRANTY

FUNAI CORR will repair this product, free of charge in the USA in the event of defect in materials or work-

manship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year

from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are

excluded from this warranty.

LABOR: FUNAI CORR will provide the labor without charge for a period of ninety (90) days from the

date of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE

RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER

WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,

missing or if service was attempted by an unauthorized service center. This limited warranty does not

apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal

use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alter-

ations or product not supplied by FUNAI CORR, or damage which results from accident, misuse, abuse,

mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as

hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of

God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORR AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR

ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED

BY THE USE OF OR THE INABIMTY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN MEU

OF ALL OTHER WARRANTIES, EXPRESS OR IMPMED, AND OF ALL OTHER LIABILITIES ON THE

PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS

REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SER-

VICE CENTER. THIS WARRANTY IS ONLY VAMD WHEN THE UNIT IS CARRIED-IN TO AN AUTHO-

RIZED SERVICE CENTER.

iMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE. IE AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT

FUNAI CORR

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THiS PRODUCT WiTH-

OUT PRIOR NOTICE.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,

please contact us at:

FUNAI CORPORATION

Customer Service

Tel :1-800=968=3429

htt p://www.SylvaniaConsumerElectronics.com

19900 Van Ness Avenue, Torrance, CA 90501

Printed in Malaysia 1EMN21452

T1200UA_r

Sylvania 6720FDG El manual del propietario

Marca: Sylvania

Modelo: 6720FDG

Categoría: Reproductores de casete

Tipo: El manual del propietario

Descargar PDF

informe

En otros idiomas

English: Sylvania 6720FDG Owner's manual

Sylvania 6720FDG El manual del propietario

Sylvania 6720FDG El manual del propietario

En otros idiomas

Documentos relacionados

Otros documentos