Polaroid PSPT401 Manual de usuario

Tipo
Manual de usuario
Smartphone 4
PSPT401
2
PSPT401
INDEX
Foreword 4
General precaution 4
Precaution for the use of charger 4
Cleaning and maintenance 5
Common Precaution 5
Getting know your phone 7
Starting your device 8
To install the SIM card 8
To install a memory card 8
To install the battery 9
Power on/off 10
Introduce the basic phone fuction 10
Switch Main Menu style 10
Home screen 10
Camera 12
GPRS/WIFI network 13
U-disk storage 14
3
PSPT401
Music 15
BT 15
Technical Specications 16
FCC cautions 17
4
PSPT401
1. Foreword
In order to ensure the phone is used safely and correctly, please
read the precautions below carefully before use.
1.1 General precaution
•Your phone is only suitable for the battery and charger
approved by our company or else it may cause the battery to
leak, overheat, explode or even catch re.
•Do not knock, vibrate or throw the phone heavily to avoid
malfunction, re, overheating, explosion or re.
•If there are abnormal phenomena, like temperature rising, color
change or distortion during the usage, charging or storage of the
battery, please stop using it and replace it with a new battery.
•It may burn the skin if liquid in the battery leaks onto skin or
clothes. If this happens please ush with plenty of clean water
immediately and go to a hospital at once.
•Please keep the battery away from re to avoid re and
explosion if the battery leaks or emits
a strange smell.
•Do not place expose the battery to moisture or it may cause
overheating, fumes and corrosion.
•Do not use or place the battery under direct sunlight, or in hot
places, it may cause leakage and overheating, thus reducing
performance and shortening the lifespan.
•Do not charge the battery for over 24 hours continuously.
•Use careful with the earphone maybe possible excessive
sound pressure from earphones and headphones can cause
hearing loss.
1.2 Precaution for the use of charger
•Do not cause short circuit to the charger, or it may cause
electric shock, fumes and damage to the charger.
•Do not use the charger if the power wire is broken, or it may
cause re and electric shock.
5
PSPT401
•Please remove accumulated dust on the power plug.
•Do not put water containers next to the power supply to avoid
overheating, re, electric shock and malfunction in case they
come into contact.
•Do not disassemble or tamper with the charger or it may
cause personal injury, electric shock, re and the damage of the
charger.
•Do not use the charger in places of high humidity, like
bathrooms, or it may cause electric shock, re and damage of
charger.
•Do not touch the charger, power cord or power plug with wet
hands or it can cause electric shock.
•Do not put heavy objects on the power cord or change the
power cord or it may cause electric shock and re.
•Please unplug the power socket before cleaning and
maintenance.
•Please hold the charger to unplug the socket as pulling the
power cord may damage the power wire and cause electric
shock and re.
1.3 Cleaning and maintenance
•As the phone, battery and charger are not waterproof, do not
use them in places of high humidity and avoid them being wet
by rain.
•Please clean the battery and charger with a soft dry cloth.
•Never use alcohol, thinner or solutions, like benzene, to wipe
the phone.
•Dirty sockets can cause poor contact and power down, and
even make recharging unavailable. So, please clean them
periodically.
1.4 Common Precaution
Mobile Phone:
•Please use the phone in an environment with temperature
between -30℃- 45℃and humidity of <75%.
6
PSPT401
•Please use the phone far away from regular telephones, TV
sets, radio sets and ofce automation equipment, to avoid
affecting the normal use of these equipments and mobile phone.
Battery:
•Store the battery in cool and ventilated place without direct
sunlight.
•The battery has a limited lifespan. The usage of battery will
be shortened progressively due to frequent charging. Once the
battery is out of use, it means that its lifespan has ended, and
you will need to replace it with an approved new battery.
•Do not dispose of old batteries as household waste. Give
them to specied disposal places and follow any stipulated
instructions for disposal.
CAUTION:RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCYIONS.
Charger:
•Do not charge under following conditions:
-- places with direct sunlight
-- places with ambient temperature less than 0℃ or over 40℃, wet
or dusty places with strong vibrations (it may cause malfunction)
-- places near electrical appliances (it may affect the image and
sound) like TV set, radio, etc
-- Adapter shall be installed near the equipment and shall be
easily accessible.The plug considered as disconnect device of
adapter
7
PSPT401
2. Getting know your phone
1℃USB / Charger Connector
2℃Proximity Sensor
3℃Earphones connector (Jack 3.5)
4℃Handset
5℃Turn on / off Button
6℃Frontal Camera
7℃Volume buttons
8℃Flash
9℃Back Camera
10℃LCD display
11℃Microphone
12℃Flash
13℃Speaker
14℃Flash
15℃Loud Speaker
8
PSPT401
3. Starting your device
•Make sure your device is turned off.
•Firmly hold the device with the front panel facing down.
•Slide your nger into the groove at the top of the phone and
gently pull open the back cover.
To install the SIM card
•Remove the battery if it is installed.
•Locate the SIM card slot, and then insert the SIM card with its
gold contacts facing down and
its cut-off corner facing out of the card slot as shown in the
diagram.
•Slide the SIM card completely into the slot .
To install a memory card
To have additional storage for your images, videos, music and
les, you can purchase a memory card and install it in your
device.
Locate the memory card slot on the upper part of the exposed
right panel.
Insert the memory card into the slot with its gold contacts facing
down until it clicks into place
9
PSPT401
To install the battery
1. Align the battery’s exposed copper contacts with the battery
connectors at the bottom part of the battery compartment.
2. Insert the contacts side of the battery rst and then gently
push the battery into place. Replace the back cover.
Charging the Battery
New batteries are shipped partially charged. Before you start
using your device, it is recommended that you install and charge
the battery. Some batteries perform best after several full
charge/discharge cycles.
Note: Only the AC adapter and USB sync cable provided with
your device must be used to charge the device.
Connect the USB connector of the AC adapter to the sync
connector on your device, and then plug in the AC adapter to an
electrical outlet to start charging the battery.
As the battery is being charged while the device is on, a charging
icon appears in the title bar
of the Home screen. After the battery has been fully charged,
a full battery icon appears in the title bar of the Home screen.
Warning:
Do not remove the battery from the device while you are
charging it using the AC or car adapter.
As a safety precaution, the battery stops charging before it
overheats.
10
PSPT401
Power on/off
To power off your phone, press & hold POWER. On release, the
Phone options menu opens.
Select ‘Power off’ and conrm.
To power on again, press & hold power
4. Introduce the basic phone fuction
1. Switch Main Menu style
(1) In default Home screen, slide your ngertip left and right
along the screen to reveal the more home screen.
(2) On Home screen, click icon on the bottom of the screen (Main
menu icon) to enter the main menu screen, slide your ngertip
left and right along the screen to reveal the more applications.
2. Home screen
(1) Read your notications
When you see a notication in the status bar, touch the bar and
slide your nger down the screen to open the list of notications
displayed in the sliding window.
Ongoing notications report activities such as call forwarding
ON, current call status, song playing.
Notications report the arrival of new messages, calendar
11
PSPT401
events, and alarms. You can clear notications list by selecting
‘Clear’ notications at the top of the notications window.
To open the message, reminder or other notication, you can
touch the items. To close the notications window, slide your
nger up the screen.
(2) Create Home screen shortcuts and widgets:
From the Home screen, touch and hold the blank screen, or click
MENU Key and select ‘Wallpaper’. Enter the main menu screen,
slide your ngertip left to reveal the widget, select a shortcut to
some of your saved information (such as a play list), a widget (a
clock) for your Home screen.
(3) Move objects on the Home screen
•To move an icon or other item on the Home screen, you must
rst touch & hold i t to enter move mode. The object will magnify
when it’s ready to be moved.
•Without lifting your nger (or you’ll drop out of move mode),
drag the object to the new position. To move an item to a section
of the Home screen not in view, move it to the edg e of the
screen and hold it there for a moment. The screen view will shift;
position the object and release.
12
PSPT401
3. Camera
All the pictures you can capture or view on your phone are stored
on a memory card, which must be installed in your phone. Before
you can use the Camera or view pictures in Pictures, make sure
you have a card installed.
13
PSPT401
4. GPRS/WIFI network
Your device’s networking capabilities allow you to access the
Internet or your corporate network through WIFI, GPRS, EDGE
(if available)
You can also add and set up a VPN or proxy connection.
To use WIFI on your device, you need access to a wireless
access point
Note: The availability and range of your device’s WIFI signal
depends on the number, infrastructure, and other objects
through which the signal passes.
When your phone is in of the normal WCDMA or HSPA network
coverage, and the other side
(the receiver’s phone and SIM card) can also be supported the
video call function of 3G.
To open the Browser you need to be connected to a network.
When you open the WIFI or GPRS of touch phone, you can take
it as a wireless AP, and the other phone or computer can internet
through the WIFI connect with your touch phone. Step1:open
Setting ,then press more, get Tethering &portable hotspot
Stept2: open Wi-Fi hotspot ,choose Set up Wi-Fi hotspot ,set a
new password
Stept3: open the WIFI on other touch phones or computers
,search the wi that your phone as a wireless AP, then input the
password, by the way you can net play.
14
PSPT401
5. U-disk storage
This phone supports movable storage, i.e., the U-disk function.
When the phone is switched on, you see the icon in the status
bar on the top of the screen when it is connected to a PC by a
data line. Touch the bar and slide your nger down the screen
to open the list of notications displayed in the sliding window.
Select [USB connected] and touch [Turn on USB storage] to
conrm, you can use the phone as a U-disk.
15
PSPT401
6. Music
Songs that you saved in SD card can be played.
7. BT
The phone supports Bluetooth functions, you can establish a
wireless connection between the phone with other compatible
devices, and data transmission, you can establish a wireless
connection between devices in the phone with a distance of
up to 10 meters. Bluetooth connection may be interference by
obstacles, such as walls or other electronic device.
Enter the setting menu, Touch the Bluetooth to open the
function, idle screen will display BT icon in the status bar.
Open the BT discoverable, and other devices can search the
phone.
Before using the phone as a Bluetooth device, you need to pair
the phone with the target device. As follows:
-Sure your phone has Bluetooth-enabled.
-Touch “Scan for devices.” Bluetooth devices within the range
of the phone will start scanning.
-Touch the device you want to pair, to conrm password to
complete the pairing
You can use Bluetooth to share the pictures, videos or music
les with family and friends.
16
PSPT401
5. Technical Specifications
Weight: About 135g
Dimensions: 124.8 x 63.5 x 10.7mm
Band:GSM850MHz/PCS1900MHz/WCDMA850MHz/
WCDMA1900MHz
Battery Type: Li-ion
Battery Capacity: 1450mAH
Talk Time: about 3-5h
Standby Time: about 200-300h
Battery Time (No prior or separate notice is required for capacity
changes)
Note: Actual operating conditions depend on the local
network environment, SIM, and user behavior. Warning: Any
consequence caused by misuse, abuse, or not following any
and all of the above-written suggestions and instructions shall
not hold the producer in any way responsible to any degree.
Announcement: The manufacturer reserves the right to change
or upgrade specications or software versions without prior or
separate notice. Trademarks mentioned or us ed in this material
belong to their respective owners.
17
PSPT401
6. FCC cautions
Any Changes or modications not expressly approved by the
party responsible for
compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the inte rference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different
18
PSPT401
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
Specic Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certied power level in all tested frequency bands, although
the SAR is determined at the highest certied power level, the
actual SAR level of the phone while operating can be well below
the maximum value, in general, the closer you are to a wireless
base station antenna, the lower the power output.Before a
new model phone is a available for sale to the public, it must
be tested and certied to the FCC that it does not exceed the
exposure limit established by the FCC, Tests for each phone are
performed in positions and locations (e.g. at the ear and worn on
the body)as required by the FCC.For body worn operation, this
model phone has been tested and meets the FCC RF exposure
guidelines when used with an accessory designated for this
product or when used wi th an accessory that Contains no metal
and that positions the handset a minimum of 1.0 cm from the
body.Non-compliance with the above restrictions may result in
violation of RF exposure guidelines.
19
PSPT401
. de serie:
echa de compra:
.diamond-electronics.com
ra localizar el centro de servicio más cercano a su domicilio, por favor consulte nuestra página WEB
.diamond-electronics.com en esta también puede escribirnos y ser atendido en línea a través de nuestro CHAT.
rreo de atención: [email protected]
ónica (Hora central de México)
unes a Viernes: 9:00 a 18:00 h
h
co, Guadalajara y Monterrey: 47 80 09 10
guascalientes, Cd Juárez, Celaya, Cuernavaca, Matamoros, Mérida, Nuevo Laredo, Pachuca, Puebla, Querétaro, Reynosa, Saltillo,
an Luis Potosí, Tijuana, Toluca, Torreón y Veracruz: 47 80 910
ancún, Culiacán, Hermosillo, León, Mexicali, Morelia y Tampico: 80 03 010
esto del país: 01 800 000 0081
os consumidores pueden obtener las partes, componentes, consumibles y accesorios en:
aller de Comercializadora Milenio:
. 7510
rque Industrial Pacíco
. 22643 Tijuana B.C. Mex.
OMERCIALIZADORA MILENIO, S.A. DE C.V.
. 7510
rque Industrial Pacíco
. 22643 Tijuana B.C. Mex.
aparato que usted ha recibido cuenta con una garantía de 1 año en la totalidad de las piezas; componentes del producto
mano de obra de la reparación a partir de la fecha de compra, así como gastos de transportación respectivos únicamente
vicio autorizado en su localidad.
1. Para hacer efectiva la garantía, bastará presentar el producto junto con esta póliza debidamente sellada o en
defecto, el comprobante de compra en nuestro taller de servicio.
2. Comercializadora Milenio S.A. de C.V. se compromete a realizar una revisión de servicio y en su caso
reparar o cambiar el artículo, si la falla es atribuible a defecto de fabricación.
3. El tiempo de reparación será máximo en 30 días a partir de la recepción del producto.
• Cuando el producto se hubiese utilizado en condiciones distintas a las normales.
• Cuando el producto no hubiese sido operado de acuerdo al instructivo de uso que le acompaña.
• Cuando el producto hubiese sido alterado o reparado por personas no autorizadas por el fabricante
nacional, importador o comercializador responsable respectivo.
Sello de la Tienda
PÓLIZA DE GARANTÍA
Distributed by:
Comercializadora Milenio S.A. de C.V.
© 2014 All Rights Reserved
MADE IN CHINA
TM
Instantly recognizable. Instantly
reassuring. The Polaroid Classic Border
lets you know you’ve purchased a product
that exemplies the best qualities of our
brand and that contributes to our rich
heritage of quality and innovation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Polaroid PSPT401 Manual de usuario

Tipo
Manual de usuario

En otros idiomas