Yamaha RX-395RDS Manual de usuario

Categoría
Receptores de medios de coche
Tipo
Manual de usuario

Este manual también es adecuado para

OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
Natural Sound Stereo Receiver
Récepteur stéréo “Son Naturel”
Natural Sound Stereoreceiver
Natural Sound Stereoreceiver
Sintonizzatore stereo a suono naturale
Receptor estéreo de Sonido Natural
Natural Sound Stereo Ontvanger
RX-495RDS/395 /395RDS
This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or
87/308/EEC.
Cet appareil est conforme aux prescriptions de la directive communautaire 87/308/CEE.
Diese Geräte entsprechen der EG-Richtlinie 82/499/EWG und/oder 87/308/EWG.
Dette apparat overholder det gaeldende EF-direktiv vedrørende radiostøj.
Questo apparecchio è conforme al D.M.13 aprile 1989 (Direttiva CEE/87/308) sulla soppressione dei radiodisturbi.
Este producto está de acuerdo con los requisitos sobre interferencias de radio frecuencia fijados por el Consejo Directivo
87/308 CEE.
Dit product voldoet aan de EEG normen betreffende radio-frekwentie storingen 82/499/EEG en/of 87/308/EEG.
2
Indoor FM Antenna
Antenne FM intérieure
UKW-Innenantenne
FM inomhusantenn
Antenna FM per interni
Antena FM interior
FM Binnenantenne
AM Loop Antenna
Cadre-Antenne AM
MW-Rahmenantenne
AM ramantenn
Antenna AM ad anello
Antena de cuadro de AM
AM Lusantenne
Remote Control Transmitter
Emetteur de télécommande
Fernbedienungsgeber
Fjärrkontrollsändare
Telecomando
Transmisor del control remoto
Afstandbediening
Batteries (size AA, R6, UM-3)
Piles (taille AA, R6, UM-3)
Batterien (Größe AA, R6, UM-3)
Batterier (storlek AA, R6, UM-3)
Batterie (dimensioni AA, R6, UM-3)
Pilas (tamaño AA, R6, UM-3)
Batterijen (maat AA, R6, UM-3)
SUPPLIED ACCESSORIES
After unpacking, check that the following parts are included.
ACCESSOIRES FOURNIS
Après le déballage, vérifier que les pièces suivantes sont incluses.
MITGELIEFERTE ZUBEHÖRTEILE
Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind.
MEDFÖLJANDE TILLBEHÖR
Kontrollera efter det apparaten packats upp att följande delar finns med.
ACCESSORI IN DOTAZIONE
Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio.
ACCESORIOS INCLUIDOS
Desembale el aparato y verificar que los siguientes accesorios están en la caja.
BIJGELEVERDE ACCESSOIRES
Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
RX-495RDS
RX-395, RX-395RDS
FEATURES
CONTENTS
3
English
Thank you for selecting this YAMAHA stereo receiver.
RX-495RDS
70W + 70W (8) RMS Output
Power, 0.04% THD, 20–20,000 Hz
RX-395, RX-395RDS
45W + 45W (8) RMS Output
Power, 0.04% THD, 20–20,000 Hz
High Dynamic Power, Low Impedance
Drive Capability
Continuously Variable Loudness Control
40-Station Random Access Preset Tuning
Automatic Preset Tuning
Preset Station Shifting Capability (Preset
Editing)
IF Count Direct PLL Synthesizer Tuning
System
SLEEP Timer
Remote Control Capability
RX-495RDS and RX-395RDS only
Multi-Functions for RDS Broadcast
Reception
RX-495RDS only
PURE DIRECT Switch to Reproduce the
Purest Source Sound
Supplied Accessories ......................................2
Caution ............................................................4
Controls and Their Functions ..........................5
Connections ..................................................10
Basic Operations ...........................................14
Tuning Operations .........................................17
Preset Tuning ................................................18
Receiving RDS Stations
RX-495RDS and RX-395RDS only .............22
Notes about the Remote Control Transmitter
.......................................................................27
Troubleshooting .............................................28
Specifications ................................................29
CAUTION : READ THIS BEFORE OPERATING YOUR UNIT.
4
1. To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2. Install this unit in a cool, dry, clean place – away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold. Avoid sources of humming
(transformers, motors). To prevent fire or electrical shock,
do not expose the unit to rain or water.
3. Never open the cabinet. If something drops into the set,
contact your dealer.
4. Do not use force on switches, controls or connection wires.
When moving the unit, first disconnect the power plug and
the wires connected to other equipment. Never pull the
wires themselves.
5. The openings on the cabinet assure proper ventilation of
the unit. If these openings are obstructed, the temperature
inside the cabinet will rise rapidly. Therefore, avoid placing
objects against these openings, and install the unit in well-
ventilated condition. Make sure to allow a space of at least
10 cm behind, on the both sides and above the top panel
of the unit. Otherwise it may not only damage the unit, but
also cause fire.
6. Always set the VOLUME control to “–
” before starting
the audio source play. Increase the volume gradually to an
appropriate level after playback has been started.
7. Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
8. Be sure to read the “TROUBLESHOOTING” section
regarding common operating errors before concluding that
the unit is faulty.
9. When not planning to use this unit for long periods of time
(ie., vacation, etc.), disconnect the AC power plug from the
wall outlet.
10.To prevent lightning damage, disconnect the AC power
plug and disconnect the antenna cable when there is an
electrical storm.
11.Grounding or polarization – Precautions should be taken
so that the grounding or polarization of an appliance is not
defeated.
12.AC outlet
Do not connect audio equipment to the AC outlet on the
rear panel if that equipment requires more power than the
outlet is rated to provide.
IMPORTANT
Please record the serial number of this unit in the space
below.
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN THE MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the main lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED. Make sure that neither core is connected
to the earth terminal of the three pin plug.
The apparatus is not disconnected from the AC power
source as long as it is connected to the wall outlet, even if
the apparatus itself is turned off.
5
English
CONTROLS AND THEIR FUNCTIONS
REMOTE CONTROL TRANSMITTER
The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the
CD player and tape deck connected to this unit are YAMAHA components designed for remote control compatibility, then this
remote control transmitter will also control various functions of each component.
For Control of This Unit
1
Tuner keys
Controls tuner.
+: Selects higher preset station number.
: Selects lower preset station number.
A/B/C/D/E: Selects the group (A – E) of preset station
numbers.
2 SLEEP timer key
The power to this unit is automatically turned off one hour after
this key is pressed (so that “SLEEP” lights up on the display).
3 POWER key
Turns the power on/off.
* While the power is on, pressing the POWER key on the
remote control transmitter switches the unit from the
power-on mode to the standby mode, and vice versa. (In
the standby mode, the power indicator on the front panel is
half illuminated.)
4 VOLUME +/– keys
Turns the volume level up/down.
5 Input selector keys
Selects input source.
For Other Component Control
Identify the remote control transmitter keys with your
component’s keys. If these keys are identical, their functions
will be the same. On each key function, refer to the
corresponding instruction on your component’s manual.
1 Tape deck keys
Controls tape deck.
*
DIR A, B and A/B are applicable only to double
cassette tape deck.
*
For a single cassette deck with automatic reverse
function, pressing DIR A will reverse the direction of
tape running.
2 CD player keys
Controls compact disc player.
*
DISC is applicable only to compact disc changer.
YAMAHA HIFI SYSTEM
REMOTE CONTROL TRANSMITTER
REC/PAUSE
DIR BDIR A
DISC
SLEEP
A/B/C/D/E
PRESET
–+
A/B
TUNER
CD
PHONO
AUX
PLAY
PLAY
VOLUMEPOWER
1
2
2
3
5
4
TAPE 2
TAPE 1
1
TAPE
RX-395, RX-395RDS RX-495RDS
5
6
FRONT PANEL
RX-495RDS
: RX-395RDS only
21A/B/C/D/E 3 4
PURE DIRECT
6578
TAPE 1TAPE 2
MONITOR
AUX PHONO
TUNER CD
POWER
RDS MODE/FREQ
PTY SEEK EON TUNING MODE
AUTO/MAN'L MONO
FM/AM TUNING EDIT MEMORY
MAN'L/AUTO FM
DOWN UP
MODE START
SPEAKERSPHONES
A
ON
OFF
B
ON
OFF
VOLUME
NATURAL SOUND STEREO RECEIVER
BASS
55
4
3
2
l
0
l
2
3
4
TREBLE
55
4
3
2
l
0
l
2
3
4
BALANCE
55
4
3
2
l
0
l
2
3
4
LR
LOUDNESS
57
6
4
3
2
l
FLAT
I0
9
8
l6
l8
20
24
28
34
40
50
60
70
l4
l2
l0
8
6
4
3
2
l
0
–dB
COPY
PRESET STATIONS
PRESET
MHz
MEMORY
AM
FM
TAPE MONITOR 12
STEREO
0
20
l00
ENTER
SLEEP
AUTO TUNING
-
30dB
RX-395, RX-395RDS
21A/B/C/D/E 3 4
6578
TAPE
MONITOR
AUX PHONO
TUNER CD
POWER
RDS MODE/FREQ
PTY SEEK EON TUNING MODE
AUTO/MAN'L MONO
FM/AM TUNING EDIT MEMORY
MAN'L/AUTO FM
DOWN UP
MODE START
SPEAKERSPHONES
A
ON
OFF
B
ON
OFF
VOLUME
NATURAL SOUND STEREO RECEIVER
BASS
55
4
3
2
l
0
l
2
3
4
TREBLE
55
4
3
2
l
0
l
2
3
4
BALANCE
55
4
3
2
l
0
l
2
3
4
LR
LOUDNESS
57
6
4
3
2
l
FLAT
I0
9
8
l6
l8
20
24
28
34
40
50
60
70
l4
l2
l0
8
6
4
3
2
l
0
–dB
PRESET STATIONS
PRESET
MHz
MEMORY
AM
FM
TAPE MONITOR 12
STEREO
0
20
l00
ENTER
SLEEP
AUTO TUNING
-
30dB
132456789 0 A
BCDEFG H IJKL M
132456789 0
BCDEFG H IJKL M
7
English
1 POWER switch
Press this switch to switch the power on. Press it again to
switch the power off.
* Standby mode
While the power is on, pressing the POWER key on the
remote control transmitter switches the unit to the standby
mode. (In this mode, the power indicator is half illuminated.)
2 Power indicator
Lights up while the power is on.
3 Remote control sensor
Receives signals from the remote control transmitter.
4 RDS MODE/FREQ button
RX-495RDS and RX-395RDS only
When an RDS station is received, pressing this button changes
the display mode into the PS mode, PTY mode, RT mode and/or
CT mode (if the station employs those RDS data services), and
frequency display in turn.
5 Display panel
Shows station frequencies and various information. (Refer to
the next page for details.)
6 FM/AM buttons
Press this button to switch the reception band to FM or AM.
7 TUNING DOWN/UP button
Used for tuning. Press the “UP” side to tune in to higher
frequencies, and press the “DOWN” side to tune in to lower
frequencies.
8 EDIT button
This button is used to exchange the places of two preset
stations with each other.
9 MEMORY (MAN’L/AUTO FM) button
When this button is pressed, the MEMO(RY) indicator flashes
for about 5 seconds. During this period, press the desired
PRESET STATIONS button to enter the displayed station into
the memory.
When this button is pressed and holded for about 3 seconds,
the automatic preset tuning begins.
0 Input selector buttons
Select a program source to listen to. When a button is
pressed, the name of selected source lights up on the display.
A PURE DIRECT switch
RX-495RDS only
Press this switch to listen to a source in the purest sound.
(Refer to page 16 for details.)
B PHONES jack
When you listen with headphones,
connect the headphones to the
PHONES jack. When listening with
headphones privately, set both the
SPEAKERS A and B switches to the
OFF position.
C SPEAKERS switches
Set the switch A or B (or both A and B) for the speaker system
(connected to this unit) you will use to the ON position. Set the
switch for the speaker system you will not use to the OFF
position.
D PTY SEEK MODE button
RX-495RDS and RX-395RDS only
When this button is pressed, the unit turns into the PTY SEEK
mode.
E PTY SEEK START button
RX-495RDS and RX-395RDS only
Press this button to begin searching for a station after the desired
program type is selected in the PTY SEEK mode.
F EON button
RX-495RDS and RX-395RDS only
Press this button to select a desired program type (NEWS,
INFO, AFFAIRS, SPORT) when you want to call a radio
program of that program type automatically.
G TUNING MODE (AUTO/MAN’L) button
Press this button to switch the tuning mode to automatic or
manual. To select the automatic tuning mode, press this
button so that “AUTO (TUNING)” lights up on the display. To
select the
manual tuning mode, press this button so that “
AUTO
(TUNING)
” goes off.
H Tone controls
BASS
Used to increase or decrease the low frequency response.
The 0 position produces flat response.
TREBLE
Used to increase or decrease the high frequency response.
The 0 position produces flat response.
I BALANCE control
Adjusts the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
J A/B/C/D/E button
Press this button to select a desired group (A–E) of preset
stations.
K PRESET STATIONS buttons
Used to enter as many as 40 station frequencies into the
memory.
L Continuously variable LOUDNESS control
Used to compensate for the human ears’ loss of sensitivity to
high and low-frequency ranges at low volume.
M VOLUME control
Used to raise or lower the volume level.
PHONES
8
DISPLAY PANEL
RX-495RDS, RX-395RDS
MHz
MEMO PS
STEREO
0
20
l00
PTY HOLD EON
NEWS INFO AFFAIRS SPORT
AUTO
RT CTPTY
SLEEP
TAPE MON TAPE MON
1 2
RX-395
AUTO TUNING
PRESET
STEREO
0
MHz
40 60
20
l00
MEMORY
SLEEP
TAPE MONITOR
FM
1324
56 789 0
A
13
2
4
50A
RX-395RDS RX-495RDS
9
English
1 Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected program source.
2 AUTO (AUTO TUNING) indicator
This indicator lights up when this unit is in the automatic tuning
mode.
3 STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
4 Signal-level meter
Indicates the signal level of the received station.
If multipath interfernce is detected, the indication decreases.
5 MEMO (MEMORY) indicator
When the MEMORY button is pressed, this indicator flashes for
about 5 seconds. During this period, the displayed station can
be programmed to the memory by using the A/B/C/D/E button
and one of the PRESET STATIONS buttons.
6 RDS mode indicators
RX-495RDS and RX-395RDS only
The name(s) of RDS mode(s) employed by the currently
received RDS station light(s) up. Illumination of the indicator on
the head of a name shows that the corresponding RDS mode
is now selected.
7 PTY HOLD indicator
RX-495RDS and RX-395RDS only
Lights up while the search is performed in the PTY SEEK
mode.
8 EON indicator
RX-495RDS and RX-395RDS only
Lights up when an RDS station that employs the EON data
service is received.
9 Program type name indicators
RX-495RDS and RX-395RDS only
The name selected in the EON mode lights up.
0 SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
A TAPE MON (TAPE MONITOR) indicator
RX-395, RX-395RDS
Lights up when the tape deck is selected as the input source
by pressing the TAPE MONITOR button.
RX-495RDS
When the first tape deck is selected as the input source by
pressing the TAPE 1 button, “TAPE MON 1” lights up, and
when the second tape deck is selected by pressing the TAPE 2
button, “TAPE MON 2” lights up.
10
CONNECTIONS
Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
CONNECTIONS WITH OTHER COMPONENTS
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left)
to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual for each component to be connected to this unit.
*
If you have YAMAHA components numbered as 1, 2, 3, etc. on the rear panel, connections can be made easily by making
sure to connect the output (or input) terminals of each component to the same-numbered terminals of this unit.
:Refer to “ABOUT THE ACCESSORY TERMINALS” on page 12.
FM
ANT
AM
ANT
GND
75
UNBAL.
PHONO CD AUX TAPE 1 TAPE 2
or or
TAPE
PB
REC
OUT
TAPE
PB
REC
OUT
A OR B : 8
MIN./SPEAKER
A B : l6
MIN./SPEAKER
SPEAKERS
A
B
AC OUTLETS
SWITCHED
l00W MAX. TOTAL
3
1
5 4 6 3 4
MAINS
GND
OUTPUT
LINE OUT
LINE IN
LINE OUT
LINE IN
AUDIO OUT
OUTPUT
GND
(Europe model)
RX-495RDS
Compact disc player
Video cassette player,
LD player, etc.
Speakers B
Right Left
Right Left
Turntable Tape deck 2Tape deck 1
Speakers A
To AC outlet
11
English
RX-395, RX-395RDS
FM
ANT
AM
ANT
GND
75
UNBAL.
PHONO CD AUX TAPE
or or
TAPE
PB
REC
OUT
A OR B : 8
MIN./SPEAKER
A B : l6
MIN./SPEAKER
SPEAKERS
A
B
AC OUTLETS
SWITCHED
l00W MAX. TOTAL
3
1
5 4 6
MAINS
GND
OUTPUT
LINE OUT
LINE IN
AUDIO OUT
OUTPUT
GND
:Refer to “ABOUT THE ACCESSORY TERMINALS” on page 12.
(Europe model)
Compact disc player
Video cassette player,
LD player, etc.
Speakers B
Right Left
Right Left
Turntable Tape deck
Speakers A
To AC outlet
12
CONNECTING SPEAKERS
Connect the SPEAKERS terminals to your speakers with wire
of the proper gauge, cut as short as possible. If the
connections are faulty, no sound will be heard from the
speakers. Make sure that the polarity of the speaker wires is
correct, that is, + and – markings are observed. If these wires
are reversed, the sound will be unnatural and will lack bass.
Do not let the bare speaker wires touch each other and do
not let them touch the metal parts of this unit as this could
damage this unit and/or speakers.
How to Connect:
Red: positive (+)
Black: negative (–)
Unscrew the knob.
Insert the bare wire.
[Remove approx. 5mm
(1/4”) insulation from
the speaker wires.]
Tighten the knob and
secure the wire.
Notes
One or two speaker systems can be connected to this unit.
If you connect only one speaker system, connect it to either
the SPEAKERS A or B terminals.
Use speakers with the specified impedance shown on the
rear of this unit.
1
2
3
ABOUT THE ACCESSORY TERMINALS
AC OUTLET(S) (SWITCHED)
(Europe and Singapore models) ...... 2 SWITCHED OUTLETS
(U.K. model) ........................................ 1 SWITCHED OUTLET
Use these to connect the power cords from your components
to this unit.
The power to the SWITCHED outlets is controlled by this unit’s
POWER switch or the provided remote control transmitter’s
POWER key. These outlets will supply power to any
component whenever this unit is turned on.
The maximum power (total power consumption of
components) that can be connected to the SWITCHED AC
OUTLET(S) is 100 watts.
GND terminal (For turntable use)
Connecting the ground wire of the turntable to the GND
terminal will normally minimize hum, but in some cases better
results may be obtained with the ground wire disconnected.
Use one of the two GND terminals on the rear of this unit for
the connection.
FM
ANT
AM
ANT
GND
75
UNBAL
GND
or
Turntable
Loosen Tighten
13
English
ANTENNA CONNECTIONS
Each antenna should be connected to the designated terminals correctly, referring to the following diagram.
Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal
strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experience
poor reception quality, an outdoor antenna may result in improvement.
Connecting the AM loop antenna
* The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.
* The AM loop antenna should be kept connected, even if an outdoor AM antenna is connected to this unit.
GND terminal
For maximum safety and minimum interference, connect the
GND terminal to a good earth ground. A good earth ground is
a metal stake driven into moist earth.
Notes
When connecting the indoor
FM antenna, insert its
connector into the FM ANT
terminal firmly.
If you need an outdoor
FM antenna to improve
FM reception quality, either
300-ohm feeder or coaxial cable may be used. In locations
troubled by electrical interference, coaxial cable is
preferable.
FM
GND
ANT
AM
ANT
GND
75
UNBAL.
PHONO CD AUX
1
Outdoor FM antenna
Indoor FM
antenna
(included)
75-ohm/300-ohm
antenna adapter
75-ohm
coaxial cable
300-ohm
feeder
Outdoor AM antenna
AM loop
antenna
(included)
Ground
Orient so that the best
reception is obtained.
12 3
14
BASIC OPERATIONS
TO PLAY A SOURCE
SPEAKERS
A
ON
OFF
B
ON
OFF
TAPE 1TAPE 2
MONITOR
AUX PHONO
TUNER CD
COPY
TAPE
MONITOR
AUX PHONO
TUNER CD
3
1, 6
2
4
7
POWER
RX-495RDS
RX-395, RX-395RDS
1
Set to the “
” position.
2 Turn the power on.
3 Select the desired input source by using the input
selector buttons.
* The name of the selected input source will appear on the
display.
* Note that pressing on each input selector button selects the
source which is connected to the corresponding input
terminals on the rear panel.
4 Select the speakers to be used.
* If you use two speaker systems, press both the A and
B switches.
5 Play the source. (For detailed information on the
tuning operation, refer to page 17.)
6
Adjust to the desired output level.
7 If desired, adjust the BASS, TREBLE, BALANCE and
LOUDNESS controls, etc. (refer to page 16).
Notes
RX-495RDS only
If you select AUX, TUNER, CD or PHONO, be sure that
TAPE 1 and/or TAPE 2 are not being selected.
If you select TAPE 1 and TAPE 2 at the same time, the
result will be the sound from the tape deck 1.
For TAPE 1 and TAPE 2, whenever the button is pressed,
the corresponding input source is selected or canceled
alternately.
RX-395 and RX-395RDS only
Whenever the TAPE MONITOR is pressed, the tape deck
is selected or canceled alternately.
If both TAPE MONITOR and another input selector button
are selected, TAPE MONITOR takes priority of another
input selector button.
To turn off the power
Press the POWER switch again.
Notes
VOLUME, BASS, TREBLE, BALANCE, LOUDNESS
controls and PURE DIRECT switch settings have no effect
on the material being recorded.
To dub from tape to tape, select TAPE 2 by pressing it.
Only the following method of dubbing can be made by using
this unit.
1 Select the source to be recorded.
* When you select AUX, TUNER, CD or PHONO, make
sure that TAPE MONITOR is not also selected.
2 Play the source and then turn the VOLUME control up
to confirm the input source. (For detailed information
on the tuning operations, refer to the page 17.)
3 Begin recording on the tape deck.
4 To monitor the audio signals being recorded, press the
TAPE MONITOR.
15
English
1 Select the source to be recorded.
* To dub from tape to tape, refer to the “Notes” shown
below.
* When you select AUX, TUNER, CD or PHONO, make
sure that neither TAPE 1 nor TAPE 2 is also selected.
2 Play the source and then turn the VOLUME control up
to confirm the input source. (For detailed information
on the tuning operations, refer to the page 17.)
3 Begin recording on the tape deck.
4 To monitor the audio signals being recorded, press the
input selector button for the tape deck being used to
make the recording.
TAPE 1TAPE 2
MONITOR
AUX PHONO
TUNER CD
COPY
TAPE 1TAPE 2
MONITOR
AUX PHONO
TUNER CD
COPY
1, 4
2
Note
VOLUME, BASS, TREBLE, BALANCE and LOUDNESS
control settings have no effect on the material being recorded.
TAPE
MONITOR
AUX PHONO
TUNER CD
TAPE
MONITOR
AUX PHONO
TUNER CD
TO RECORD A SOURCE TO TAPE
RX-495RDS RX-395, RX-395RDS
SOURCE
Tape deck connected to
the TAPE 2 terminals.
RECORDER
Tape deck connected to
the TAPE 1 terminals.
16
Because one or two speaker systems can be connected to this
unit, the SPEAKERS switches allow you to select speaker
system A or B, or both at once.
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
BASS : Turn this clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE : Turn this clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
Selecting the SPEAKER system
Adjusting the BASS and TREBLE
controls
Adjusting the BALANCE control
SPEAKERS
A
ON
OFF
B
ON
OFF
BALANCE
55
4
3
2
l
0
l
2
3
4
LR
TREBLE
55
4
3
2
l
0
l
2
3
4
BASS
55
4
3
2
l
0
l
2
3
4
Adjusting the continuously variable
LOUDNESS control
This control provides compensation for the human ears’ loss of
sensitivity to high and low-frequency ranges at low volume.
This control is adjustable to retain full tonal range at any
volume level.
1
Set to the “FLAT” position.
2
Set to the loudest listening
level that you would listen
to.
3
Turn until the desired
volume is gained.
LOUDNESS
57
4
3
2
l
FLAT
l0
9
8
6
30 dB
LOUDNESS
57
4
3
2
l
FLAT
l0
9
8
6
30 dB
VOLUME
l6
l8
20
24
28
34
40
50
60
70
l4
l2
l0
8
6
4
3
2
l
0
–dB
Using the PURE DIRECT switch
RX-495RDS only
You can enjoy the purest possible sound from your audio
sources by pressing this switch inward. By doing so, the audio
signal bypasses the BASS, TREBLE, BALANCE and
LOUDNESS controls, eliminating any alterations to the audio
signal.
PURE DIRECT
Notes
If you tune to an FM station manually, it is received in
monaural mode automatically to increase the signal quality.
RX-495RDS and RX-395RDS only
When tuned in to a station, the frequency of the received
station is shown on the display. If an RDS station that
employs PS data service is received, the frequency is then
replaced by the station name. Refer to page 24 for details.
17
English
1 Select the reception band (FM or AM) confirming it on
the display.
2
3 Tune to a desired station manually.
* To continue tuning search, press and hold the button.
FM/AM
FM AM
or
1 Select the reception band (FM or AM) confirming it on
the display.
2
3
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
* If the station where tuning search stops is not the desired
one, press again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.
TUNING OPERATIONS
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING MANUAL TUNING
FM/AM
TUNING MODE
AUTO/MAN'L MONO
TUNING MODE
AUTO/MAN'L MONO
TUNING
DOWN UP
TUNING
DOWN UP
AUTO
AUTO TUNING
Turn “AUTO (TUNING)”
off.
FM AM
or
1 3
2
RX-495RDS,RX-395RDS
RX-395
18
1 Tune to a desired station.
(Refer to the previous page for tuning procedure.)
2 Select a desired group (A – E) of preset stations
confirming it on the display.
3
4 Select a preset station number where you want to
program the station before “MEMO(RY)” goes off from
the display.
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to preset station numbers
on other groups in the same way by selecting other
groups in step 2.
MANUAL PRESET TUNING
This unit can store station frequencies (selected by tuning operation) by using the PRESET STATIONS buttons. With this function,
you can recall any desired station by only pressing the corresponding PRESET STATIONS button. Up to 40 stations (8 stations x 5
groups) can be stored.
PRESET TUNING
To store stations
3
2
4
A/B/C/D/E
PRESET
2134
6578
PRESET STATIONS
RX-495RDS, RX-395RDSRX-395
PRESET
MHz
FM
0
20
l00
40 60
Shows the
displayed station
has been
programmed to
A1.
MHz
PS
0
20
l00
RT CTPTY
RX-495RDS, RX-395RDS
RX-395
MEMORY
MAN'L/AUTO FM
MEMO
MEMORY
Flashes on and off for about 5 seconds.
RX-495RDS, RX-395RDSRX-395
19
English
1 Select the group of preset stations.
2 Select the preset station number.
Notes
A new setting can be programmed in place of the former
one.
For presets, the setting of the reception mode (stereo or
monaural) is stored along with the station frequency.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the POWER switch is set off or the
power plug is disconnected from the AC outlet or the power is
cut due to temporary power failure. If, however, the power is
cut for more than one week, the memory may be erased. If
so, it can be re-programmed by simply following the PRESET
TUNING steps.
To recall a preset station
1
2
PRESET
A/B/C/D/E
2134
6578
PRESET STATIONS
PRESET
RX-495RDS, RX-395RDSRX-395
RX-495RDS, RX-395RDSRX-395
1
2
The automatic preset tuning begins from A1. Received
stations are programmed to A1, A2 ... A8 sequentially.
* If more than 8 stations are received, they are also
programmed to the preset station numbers on other groups
(B, C, D and E) in that order.
RX-395 only
If you want to store the first station received by the
automatic preset tuning to a desired preset station
number.
If, for example, you want to store the first received station to
C5, select “C5” by using the A/B/C/D/E button and the
PRESET STATIONS buttons after pressing the MEMORY
button in step 2 before the automatic preset tuning begins. The
first received station is stored to C5, and next stations to C6,
C7 ... sequentially.
If stations are stored up to E8, the automatic preset tuning is
finished automatically.
When the automatic preset tuning is finished
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedure of the section “To recall a preset
station” on page 19.
To recall a preset station
Simply follow the procedure of the section “To recall a preset
station” on page 19.
* RX-495RDS and RX-395RDS only
A recalled station is shown by the frequency or station name
on the display.
Notes
If no station is received by the automatic preset tuning
search, the search finishes after
“NOTHING” flashes for
about 3 seconds on the display.
You can replace a preset station by another FM or AM
station manually by simply following the procedure of the
section “To store stations” on page 18.
RX-395 only
If the number of received stations is not enough to be stored
up to E8, the search will be finished automatically when it
reaches the highest frequency after searching through all
frequencies.
With this function, only FM stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune to it in monaural
manually and program it by following the procedure of the
section “To store stations” on page 18.
RX-495RDS and RX-395RDS only
The automatic preset tuning search is performed through all
RDS network frequencies until stations are stored up to E8.
If the number of received stations is not enough to be stored
up to E8, the search will be finished automatically after
searching all frequencies.
With this function, only RDS stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune to it in monaural
manually and program it by following the procedure of the
section “To store stations” on page 18.
* There may be a case that this function cannot receive a
station which could be received by the automatic tuning
method. This is because this function receives a large
volume of PI (Program Identification) data along with the
station.
20
To store stations
Press and hold for
about 3 seconds.
FM/AM
FM
MEMORY
MAN'L/AUTO FM
1 2
AUTOMATIC PRESET TUNING
You can also make use of an automatic preset tuning function for FM stations only. By this function, this unit performs automatic
tuning and stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the
manual preset tuning method on page 18.
* RX-495RDS and RX-395RDS only
Only RDS stations can be stored by this function.
MEMO
AUTO
MEMORY
AUTO TUNING
RX-495RDS,RX-395RDS
RX-395
Flashes.
Flashes.
21
English
EXCHANGING PRESET STATIONS
You can exchange the places of two preset stations with each other as shown below.
Example)
If you want to shift the preset station on E1 to A5, and vice
versa.
1 Recall the preset station on E1 (by following the method
of “To recall a preset station” on page 19).
2
3 Next, recall the preset station on A5 by following the
same method with step 1.
4
Flashes.
Flashes.
EDIT
EDIT
MEMO
Flashes.
MEMORY
MEMORY
Flashes.
MEMO
2, 4
RX-495RDS, RX-395RDSRX-395
RX-495RDS, RX-395RDSRX-395
RX-495RDS, RX-395RDS
RX-395
Shows the exchange of
stations is completed.
22
In areas where RDS broadcasts cannot be received, the RDS broadcast functions do not operate. (The procedures from page 22 to
page 26 are not necesssary.)
RECEIVING RDS STATIONS
RX-495RDS
and
RX-395RDS
only
RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many countries. Stations
using this system transmit an inaudible stream of data in addition to the normal radio signal.
RDS data contains various information, such as PI (Program Identification), PS (Program Service name), PTY (Program Type), RT
(Radio Text), CT (Clock Time), EON (Enhanced Other Networks), etc.
RDS function is carried out among the network stations.
* This unit utilizes PI, PS, PTY, RT, CT and EON to receive RDS broadcast stations.
Displaying RDS data
This unit can be turned into the following five modes to display
RDS data.
PS (Program Service name) mode:
Displays the name of the RDS station now being received
instead of the frequency.
PTY (Program Type) mode:
Displays the type of the program on the RDS station now being
received. There are 15 program types to classify RDS
stations. Refer to the next page for details.
RT (Radio Text) mode:
Displays information about the program (such as title of the
song, name of the singer, etc.) on the RDS station now being
received.
CT (Clock Time) mode:
Displays current time. This signal comes from the RDS station
now being received.
EON (Enhanced Other Networks)
mode:
Automatically receives a program of the designated program
type when its broadcast starts, in place of the program now
being received. When the broadcast of the called program
ends, the previously received program (or another program on
the same station) is recalled.
PS
STEREO
0
20
l00
EON
NEWS INFO AFFAIRS SPORT
AUTO
RT CTPTY
23
English
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
News:
Short accounts of facts, events and publicly
expressed views, reportage and actuality.
Current affairs:
Topical program expanding or enlarging
upon the news, generally in different
presentation style or concept, including
documentary debate, or analysis.
Information:
Program whose purpose is to impart advice
in the widest sense, including
meteorological reports and forecasts,
consumer affairs, medical help, etc.
Sport:
Program concerned with any aspect of
sport.
Education:
Program intended primarily to educate, of
which the formal element is fundamental.
Drama:
All radio plays and serials.
Culture:
Programs concerned with any aspect of
national or regional culture, including
religious affairs, philosophy, social science,
language, theatre, etc.
Science:
Programs about the natural sciences and
technology.
Varied:
Used for mainly speech-based programs
usually of light-entertainment nature, not
covered by above categories. Examples
are: quizzes, panel games, personality
interviews, comedy and satire.
Pop:
Commercial music, which would generally
be considered to be of current popular
appeal, often featuring in current or recent
record sales charts.
Rock:
Contemporary modern music, usually
written and performed by young musicians.
M.O.R.:
(Middle of the Road Music). Common term
to describe music considered to be “easy-
listening”, as opposed to Pop, Rock or
Classical. Music in this category is often but
not always, vocal, and usually of short
duration (<5 min.)
Light classics:
Classical Musical for general, rather than
specialist appreciation. Examples of music
in this category are instrumental music, and
vocal or choral works.
Serious classics:
Performances of major orchestral works,
symphonies, chamber music etc., and
including Grand Opera.
Other music:
Musical styles not fitting into any of the
above categories. Particularly used for
specialist music, of which Jazz, Rhythm &
Blues, Folk, Country, and Reggae are
examples.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M.O.R. M
LIGHT M
CLASSICS
OTHER M
Programs types in the PTY mode
PS mode The name of the station being received is displayed.
If the station does not employ the PS data service, this mode
will not be selected.
PTY mode The type of the program on the station being received is
displayed. If the station does not employ the PTY data
service, this mode will not be selected.
(
You can make this unit search for a station which is
broadcasting a program of your desired program type. For
details, refer to the next page.)
RT mode Information about the program on the station being received
is displayed. Information is displayed by a maximum of 64
Roman Alphabets including umlaut sign. If other characters
are used on the RT data, they are displayed with under-bars.
If the station does not employ the RT data service, this mode
will not be selected.
CT mode Current time is displayed in the following form. The CT data
from the station being received changes every minute.
If the data is accidentally cut off, “CT WAIT” may light up.
If the station does not employ the CT data service, this mode
will not be selected.
Frequency The frequency of the station being received is displayed.
display mode
24
Changing the RDS modes
When an RDS station is received, “PS”, “PTY”, “RT” and/or “CT” that correspond to the RDS data services employed by the station
light up on the display. By pressing the RDS MODE/FREQ button once or more, you can change the display mode among the RDS
modes employed by the received station in the order shown below. (The RDS mode not employed by the station cannot be selected.)
Illumination of the indicator on the head of a name of RDS mode shows that the corresponding RDS mode is now selected.
* When an RDS station is received, do not press the RDS MODE/FREQ button until one or some names of RDS modes light up on
the display. If the button is pressed before one or some names light up on the display, the mode cannot be changed. This is
because the unit has not received all of the RDS data on the station yet.
* If no name of RDS mode lights up on the display, the mode cannot be changed.
Notes
RDS data service cannnot be utilized by this unit if the received signal is not strong enough. Especially, the RT (Radio Text
mode) needs much data to be received, so it may occur that RT mode cannot be displayed even if other RDS modes (PS, PTY,
etc.) are displayed.
There may be a case that RDS data reception is not possible due to poor reception conditions. If so, press the TUNING MODE
button so that “AUTO (AUTO TUNING)” goes off from the display. Though the reception mode is changed to monaural by this
operation, when you change the display to an RDS mode, RDS data may be displayed.
If the signal strength gets weakened by external interference during receiving an RDS station, the RDS data service may be cut
off suddenly and “
...
WAIT” will light up on the display.
RDS MODE/FREQ
Hour Minute
25
English
2
1
3
Calling a program of your desired program type
from among preset RDS stations (PTY SEEK)
By designating a program type, the unit automatically searches all preset stations for an RDS station which broadcasts a program of
that program type.
* There are 15 program types to classify RDS stations. For details, refer to page 23.
1 Turn the unit into the PTY SEEK mode.
* The program type of the station now being received or
“NEWS” flashes on the display.
2 Select the desired program type.
3 Begin searching all preset RDS stations.
* “PTY HOLD” lights up on the display.
If a station which broadcasts a program of the program
type is found, the unit stops at the station and displays the
frequency of the station. If the station has PS data, after
that, it turns into the PS mode.
If the called station is not the desired one, press the PTY
SEEK START button once more.
The unit begins searching for another station which
brodcasts a program of the same program type.
If no station is found, “NOTHING” appears and then
returns to frequency display. If the station has PS data,
after that, it turns into the PS mode.
* If the PTY SEEK START button is pressed once more
during searching, this mode is canceled and turns into
the frequency display. If the station has PS data, after
that, it turns into the PS mode.
To cancel this function
If the PTY SEEK MODE button is pressed once more, the
PTY SEEK mode is canceled and turns into the frequency
display. If the station has PS data, after that, it turns into the
PS mode.
PS
STEREO
0
20
PTY HOLD
AUTO
RT
CT
PTY
Flashes.
Flashes.
PTY SEEK EON
MODE START
TUNING
DOWN UP
PTY SEEK EON
MODE START
Making this unit call a program of your desired program type automatically
when its broadcast starts
This function uses the EON (Enhanced Other Networks) data service on the RDS station network.
By only selecting a desired program type (NEWS, INFO, AFFAIRS or SPORT), this unit automatically searches all preset RDS
stations for a station that broadcasts a program of that program type in the background, and, if found, receives a program when its
broadcast starts in place of the program now being received.
* This function can be used only when an RDS station that employs the EON data service is received. (When such a station is
received, “EON” lights up on the display.)
1 Make sure that “EON” is illuminated on the display.
* If “EON” is not illuminated on the display, receive an (or
another) RDS station so that “EON” lights up on the
display.
2 Select a desired program type, NEWS, INFO, AFFAIRS
or SPORT.
Press once or more.
The search is performed among all preset RDS stations
in the background. If a program is found, the program is
automatically received when its broadcast starts.
3 When the broadcast of the called program ends, the
previously received program (or another program on the
same station) is recalled.
To cancel this function
Press the EON button once or more, so that no program type
name lights up on the display.
M
Hz
PS
EON
RT CT
PTY
NEWS INFO AFFAIRS SPORT
PS
EON
NEWS INFO AFFAIRS SPORT
RT CTPTY
Lights up.
Flashes.
PS
EON
RT CT
PTY
26
2
PTY SEEK EON
MODE START
MHz
PS
STEREO
0
20
l00
EON
RT CTPTY
27
English
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Battery installation
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
Use only AA, R6, UM-3 batteries for replacement.
Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
Remove the batteries if the remote control transmitter will
not be used for an extended period of time.
If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
Remote control transmitter operation range
Notes
There should be no large obstacles between the remote
control transmitter and the main unit.
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid direct
lighting.
1
3
2
30°
30°
Remote control
sensor
Within approximately
6 m (19.7 feet)
The unit fails to turn on when the POWER
switch is pressed.
No sound.
The sound suddenly goes off.
Only one side speaker outputs the sound.
There is a lack of bass, and no ambience.
Sound “hums”.
Sound level is low.
The volume level is low while playing a
record.
The volume level cannot be increased, or
sound is distorted.
FM stereo reception is noisy.
There is distortion and clear reception
cannot be obtained even with a good FM
antenna.
A desired station cannot be tuned in with
the automatic tuning method.
Previously preset stations can no longer
be tuned in.
A desired station cannot be tuned in with
the automatic tuning method.
There are continuous crackling and
hissing noises.
There are buzzing and whining noises
(especially in the evening).
The remote control transmitter does not
work.
The sound is degraded when listening
with the headphones connected to the
compact disc player or cassette deck that
are connected with this unit.
Power cord is not plugged in or is not
completely inserted.
Incorrect output cord connections.
Appropriate input selector button is not
pressed.
The SPEAKERS switches are not set properly.
Speaker connections are not secure.
The protection circuit has been activated
because of short circuit etc.
The SLEEP timer functioned.
Incorrect setting of the BALANCE control.
Incorrect cord connections.
The + and – wires are connected in reverse at
this unit or speakers.
Incorrect cord connections.
No connection from the turntable to the GND
terminal.
The LOUDNESS control is functioning.
The record is being played on a turntable with
an MC cartridge.
The power to the component connected to the
REC OUT terminals of this unit is off.
Because of the characteristics of FM stereo
broadcasts, this is limited to cases where the
transmitter is too far away or the antenna input
is poor.
There is multipath interference.
The station is too weak.
The tuner has been unplugged for a long
period.
Weak signal or loose antenna connections.
Noises will result from ligtning, fluorescent
lamps, motors, thermostats and other electrical
equipment.
A television set is being used nearby.
Direct sunlight or lighting (of an inverter type of
flourescent lamp etc.) is striking the remote
control sensor of the main unit.
The batteries of this remote control transmitter
are too weak.
The power to this unit is off.
Firmly plug in the power cord.
Connect the cords properly. If the problem
persists, the cords may be defective.
Press the appropriate input selector button
corresponding to the input source.
Set the SPEAKERS switch that corresponds to
the speakers to be used to the ON position.
Secure the connections.
Turning the unit off and then on will reset the
protection circuit.
Cancel the SLEEP timer function.
Adjust it to the appropriate position.
Connect the cords properly. If the problem
persists, the cords may be defective.
Connect the speaker wires in the correct
phase (+ and –).
Firmly connect the audio plugs. If the problem
persists, the cords may be defective.
Make the GND connection between the
turntable and this unit.
Set the LOUDNESS control to the FLAT
position.
The player should be connected to the unit
through an MC head amplifier (available
separately).
Turn the power to the component on.
Check the antenna connections.
Try using a high quality directional FM
antenna.
Set the TUNING MODE button to the manual
tuning mode.
Adjust antenna placement to eliminate
multipath interference.
Use the manual tuning method.
Use a high quality directional FM antenna.
Repeat the presetting procedure.
Tighten the AM loop antenna connections and
rotate it for best reception.
Use the manual tuning method.
Use an outdoor antenna and a ground wire.
This will help somewhat but it is difficult to
eliminate all noise.
Relocate this unit away from the TV.
Change the position of the main unit.
Replace the batteries with new ones.
Turn the power to this unit on.
28
AmplifierFMAMOthers
Remote control
transmitter
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and
contact your authorized YAMAHA dealer or service center for help.
SYMPTOM CAUSE REMEDY
29
English
SPECIFICATIONS
AUDIO SECTION
Minimum RMS Output Power per Channel
8 ohms, 20 Hz to 20 kHz, 0.04% THD
<RX-495RDS> ...........................................70W+70W
<RX-395, RX-395RDS>.............................45W+45W
Dynamic Power per Channel
(by IHF Dynamic Headroom measuring method)
<RX-495RDS>
8/6/4/2 ohms..................................100/120/145/170W
<RX-395, RX-395RDS>
8/6/4/2 ohms..........................................68/75/85/95W
DIN Standard Output Power per Channel
4 ohms, 1 kHz, 0.7% THD
[Europe model only]
<RX-495RDS>...................................................100W
<RX-395, RX-395RDS>.......................................55W
IEC Power
8 ohms, 1 kHz, 0.04% THD
[Europe model only]
<RX-495RDS>.....................................................80W
<RX-395, RX-395RDS>.......................................50W
Power Band Width
<RX-495RDS>
8 ohms, 35W, 0.08% THD....................10 Hz to 50 kHz
<RX-395, RX-395RDS>
8 ohms, 22.5W, 0.08% THD.................10 Hz to 50 kHz
Damping Factor
8 ohms, 20 Hz to 20 kHz ............................100 or more
Input Sensitivity/Impedance
PHONO MM......................................2.5 mV/47 k-ohms
CD/TAPE/AUX
..................................150 mV/47 k-ohms
Maximum Input Signal (1 kHz, 0.04% THD)
PHONO MM.........................................................90 mV
Output Level
REC OUT...........................................................150 mV
Headphone Jack Rated Output/Impedance
Output Level (8 ohms, 0.04% THD)
<RX-495RDS>.....................................................0.48V
<RX-395, RX-395RDS>.......................................0.45V
Impedance
<RX-495RDS>...............................................390 ohms
<RX-395, RX-395RDS>................................330 ohms
Frequency Response (20 Hz to 20 kHz)
CD/TAPE/AUX
.................................................0±0.5 dB
RIAA Equalization Deviation
PHONO MM.....................................................0±0.5 dB
Total Harmonic Distortion
PHONO MM to REC OUT
20 Hz to 20 kHz, 1V...........................................0.02%
CD/TAPE/AUX
to SP OUT
20 Hz to 20 kHz, 35W/8 ohms...........................0.02%
Signal-to-Noise Ratio (IHF-A Network)
PHONO MM to REC OUT
(5 mV Input Shorted) ............................................82 dB
CD/TAPE/AUX
to SP OUT (Input Shorted).........108 dB
Residual Noise (IHF-A Network)...........................100 µV
Channel Separation (Vol. –30 dB, EFFECT OFF)
CD/TAPE/AUX
(Input 5.1 k-ohms Terminated, 1 kHz)................60 dB
Tone Control Characteristics
BASS: Boost/cut ....................................±10 dB (50 Hz)
Turnover Frequency .............................(350 Hz)
TREBLE: Boost/cut..............................±10 dB (20 kHz)
Turnover Frequency........................(3.5 kHz)
Continuous Loudness Control...................– 30 dB (1 kHz)
(Level related equalization)
30
FM SECTION
Tuning Range .....................................87.5 to 108.0 MHz
Usable Sensitivity (75 ohms)
DIN, Mono (S/N 26 dB) .......................................0.9 µV
DIN, Stereo (S/N 46 dB) ......................................24 µV
Image Response Ratio ...........................................80 dB
IF Response Ratio..................................................80 dB
Spurious Response Ratio.......................................70 dB
AM Suppression Ratio............................................55 dB
Capture Ratio.........................................................1.5 dB
Selectivity (two signals, ±300 kHz, 40 kHz Dev.)
................................................................................70 dB
Signal-to-Noise Ratio
(DIN-Weighted, 40 kHz Dev.) Mono/Stereo
...................................................................75 dB/70 dB
Harmonic Distortion
Mono/Stereo (1kHz, 40 kHz Dev.)
......................................................................0.1%/0.2%
Stereo Separation
(1 kHz, 40 kHz Dev.).............................................50 dB
Frequency Response
20 Hz to 15 kHz..............................................0 ±1.5 dB
AM SECTION
Tuning Range .......................................531 to 1,611 kHz
Usable Sensitivity .............................................100 µV/m
Selectivity................................................................32 dB
Signal-to-Noise Ratio..............................................50 dB
Image Response Ratio ...........................................40 dB
Spurious Response Ratio.......................................50 dB
Harmonic Distortion (1 kHz).....................................0.3%
AUDIO SECTION
Output Level/Impedance
FM (1 kHz, 40 kHz Dev.)
........................................................500 mV/2.2 k-ohms
AM (30% mod., 1 kHz)
........................................................150 mV/2.2 k-ohms
GENERAL
Power Supply .........................................AC 230V, 50 Hz
Power Consumption
<RX-495RDS>...................................................120W
<RX-395, RX-395RDS>.....................................145W
AC Outlets
2 SWITCHED OUTLETS
[Europe model]...................................100W max. total
1 SWITCHED OUTLET
[U.K. model] .......................................100W max. total
Dimensions (W x H x D) ...............435 x 146 x 308.5 mm
Weight
<RX-495RDS>.....................................................7.8 kg
<RX-395, RX-395RDS>......................................6.5 kg
Accessories...........................................AM loop antenna
Indoor FM antenna
Remote control transmitter
Batteries
Specifications are subject to change without notice.
FM GEDEELTE
Afstembereik......................................87,5 tot 108,0 MHz
Effectieve Gevoeligheid (75 ohm)
DIN, Mono (Signaal/Ruis 26 dB) .........................0,9 µV
DIN, Stereo (Signaal/Ruis 46 dB) ........................24 µV
Spiegelfrekwentie Verhouding ...............................80 dB
IF Frekwentiebereik Verhouding.............................80 dB
Parasitaire Frekwentieverhouding ..........................70 dB
AM Ruisonderdrukkingsverhouding........................55 dB
Opvangfrekwentieverhouding................................1,5 dB
Selectiviteit (twee signalen, ±300 kHz, 40 kHz Afw.)
................................................................................70 dB
Signaal/Ruisverhouding
(DIN-norm, 40 kHz Afw.) Mono/Stereo.......75 dB/70 dB
Harmonische Vervorming
(1 kHz, 40 kHz Afw.) Mono/Stereo ...............0,1%/0,2%
Stereo Scheiding (1 kHz, 40 kHz Afw.)...................50 dB
Frekwentiebereik
20 Hz tot 15 kHz..............................................0±1,5 dB
AM GEDEELTE
Afstembereik........................................531 tot 1.611 kHz
Effectieve Gevoeligheid....................................100 µV/m
Selectivitei...............................................................32 dB
Signaal/Ruisverhouding..........................................50 dB
Spiegelfrekwentie Verhouding................................40 dB
Parasitaire Frekwentieverhouding ......................... 50 dB
Harmonische Vervorming (1 kHz)............................0,3%
AUDIO GEDEELTE
Uitgangsniveau/Impedantie
FM (1 kHz, 40 kHz Afw.)...................500 mV/2,2 k-ohm
AM (30% mod., 1 kHz)......................150 mV/2,2 k-ohm
ALGEMEEN
Spanningsvereisten................230V, 50 Hz wisselstroom
Stroomverbruik
<RX-495RDS>.....................................................120W
<RX-395, RX-395RDS>.......................................145W
Netspanningsuitgangen (AC OUTLETS)
2 GESCHAKELDE NETSPANNINGSUITGANGEN
[Modellen voor Europa]
.......................................Max. totaal vermogen: 100W
1 GESCHAKELDE NETSPANNINGSUITGANG
[Modellen voor Groot-Brittannië]
.......................................Max. totaal vermogen: 100W
Afmetingen (L x H x B) .................435 x 146 x 308,5 mm
Gewicht
<RX-495RDS>.....................................................7,8 kg
<RX-395, RX-395RDS>......................................6,5 kg
Toebehoren.............................................AM Lusantenne
FM Binnenantenne
Afstandbediening
Batterijen
Alle specificaties zijn onder voorbehoud en kunnen
zondere nadere kennisgeving worden gewijzigd.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VU27700

Transcripción de documentos

RX-495RDS/395/395RDS Natural Sound Stereo Receiver Récepteur stéréo “Son Naturel” Natural Sound Stereoreceiver Natural Sound Stereoreceiver Sintonizzatore stereo a suono naturale Receptor estéreo de Sonido Natural Natural Sound Stereo Ontvanger OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTE ZUBEHÖRTEILE MEDFÖLJANDE TILLBEHÖR ACCESSORI IN DOTAZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE ACCESSOIRES ● ● ● ● ● ● ● Indoor FM Antenna Antenne FM intérieure UKW-Innenantenne FM inomhusantenn Antenna FM per interni Antena FM interior FM Binnenantenne ● ● ● ● ● ● ● After unpacking, check that the following parts are included. Après le déballage, vérifier que les pièces suivantes sont incluses. Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind. Kontrollera efter det apparaten packats upp att följande delar finns med. Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio. Desembale el aparato y verificar que los siguientes accesorios están en la caja. Controleer na het uitpakken of de volgende onderdelen voorhanden zijn. ● ● ● ● ● ● ● Remote Control Transmitter Emetteur de télécommande Fernbedienungsgeber Fjärrkontrollsändare Telecomando Transmisor del control remoto Afstandbediening RX-495RDS ● ● ● ● ● ● ● AM Loop Antenna Cadre-Antenne AM MW-Rahmenantenne AM ramantenn Antenna AM ad anello Antena de cuadro de AM AM Lusantenne ● ● ● ● ● ● ● RX-395, RX-395RDS Batteries (size AA, R6, UM-3) Piles (taille AA, R6, UM-3) Batterien (Größe AA, R6, UM-3) Batterier (storlek AA, R6, UM-3) Batterie (dimensioni AA, R6, UM-3) Pilas (tamaño AA, R6, UM-3) Batterijen (maat AA, R6, UM-3) This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or 87/308/EEC. Cet appareil est conforme aux prescriptions de la directive communautaire 87/308/CEE. Diese Geräte entsprechen der EG-Richtlinie 82/499/EWG und/oder 87/308/EWG. Dette apparat overholder det gaeldende EF-direktiv vedrørende radiostøj. Questo apparecchio è conforme al D.M.13 aprile 1989 (Direttiva CEE/87/308) sulla soppressione dei radiodisturbi. Este producto está de acuerdo con los requisitos sobre interferencias de radio frecuencia fijados por el Consejo Directivo 87/308 CEE. Dit product voldoet aan de EEG normen betreffende radio-frekwentie storingen 82/499/EEG en/of 87/308/EEG. 2 FEATURES ● RX-495RDS 70W + 70W (8Ω) RMS Output Power, 0.04% THD, 20–20,000 Hz RX-395, RX-395RDS 45W + 45W (8Ω) RMS Output Power, 0.04% THD, 20–20,000 Hz ● Preset Station Shifting Capability (Preset Editing) ● High Dynamic Power, Low Impedance Drive Capability ● Remote Control Capability ● Continuously Variable Loudness Control ● 40-Station Random Access Preset Tuning ● Automatic Preset Tuning English Thank you for selecting this YAMAHA stereo receiver. ● IF Count Direct PLL Synthesizer Tuning System ● SLEEP Timer ● RX-495RDS and RX-395RDS only Multi-Functions for RDS Broadcast Reception ● RX-495RDS only PURE DIRECT Switch to Reproduce the Purest Source Sound CONTENTS Supplied Accessories ......................................2 Caution ............................................................4 Receiving RDS Stations RX-495RDS and RX-395RDS only .............22 Controls and Their Functions ..........................5 Notes about the Remote Control Transmitter Connections ..................................................10 .......................................................................27 Basic Operations ...........................................14 Troubleshooting .............................................28 Tuning Operations .........................................17 Specifications ................................................29 Preset Tuning ................................................18 3 CAUTION : READ THIS BEFORE OPERATING YOUR UNIT. 1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water. For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. 3. Never open the cabinet. If something drops into the set, contact your dealer. 4. Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wires themselves. 5. The openings on the cabinet assure proper ventilation of the unit. If these openings are obstructed, the temperature inside the cabinet will rise rapidly. Therefore, avoid placing objects against these openings, and install the unit in wellventilated condition. Make sure to allow a space of at least 10 cm behind, on the both sides and above the top panel of the unit. Otherwise it may not only damage the unit, but also cause fire. 6. Always set the VOLUME control to “– ∞” before starting the audio source play. Increase the volume gradually to an appropriate level after playback has been started. Special Instructions for U.K. Model IMPORTANT THE WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the main lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Make sure that neither core is connected to the earth terminal of the three pin plug. 7. Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 8. Be sure to read the “TROUBLESHOOTING” section regarding common operating errors before concluding that the unit is faulty. 9. When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet. 10. To prevent lightning damage, disconnect the AC power plug and disconnect the antenna cable when there is an electrical storm. 11. Grounding or polarization – Precautions should be taken so that the grounding or polarization of an appliance is not defeated. 12. AC outlet Do not connect audio equipment to the AC outlet on the rear panel if that equipment requires more power than the outlet is rated to provide. IMPORTANT Please record the serial number of this unit in the space below. Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 4 The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off. REMOTE CONTROL TRANSMITTER English CONTROLS AND THEIR FUNCTIONS The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the CD player and tape deck connected to this unit are YAMAHA components designed for remote control compatibility, then this remote control transmitter will also control various functions of each component. For Control of This Unit 1 Tuner keys Controls tuner. +: Selects higher preset station number. –: Selects lower preset station number. A/B/C/D/E: Selects the group (A – E) of preset station numbers. 5 RX-395, RX-395RDS RX-495RDS TAPE 2 TAPE TAPE 1 2 SLEEP timer key The power to this unit is automatically turned off one hour after this key is pressed (so that “SLEEP” lights up on the display). 3 POWER key Turns the power on/off. * While the power is on, pressing the POWER key on the remote control transmitter switches the unit from the power-on mode to the standby mode, and vice versa. (In the standby mode, the power indicator on the front panel is half illuminated.) YAMAHA HIFI SYSTEM REMOTE CONTROL TRANSMITTER AUX DIR A DIR B REC/PAUSE 1 1 PLAY A/B – PRESET + A/B/C/D/E DISC PLAY 2 5 4 VOLUME +/– keys Turns the volume level up/down. CD 5 Input selector keys Selects input source. PHONO POWER 2 TUNER VOLUME SLEEP For Other Component Control 3 4 Identify the remote control transmitter keys with your component’s keys. If these keys are identical, their functions will be the same. On each key function, refer to the corresponding instruction on your component’s manual. 1 Tape deck keys Controls tape deck. * DIR A, B and A/B are applicable only to double cassette tape deck. * For a single cassette deck with automatic reverse function, pressing DIR A will reverse the direction of tape running. 2 CD player keys Controls compact disc player. * DISC is applicable only to compact disc changer. 5 FRONT PANEL RX-495RDS 1 2 3 4 5 6 7 8 9 0 NATURAL SOUND STEREO RECEIVER A TUNER CD PURE DIRECT POWER PRESET MONITOR TAPE 2 TAPE 1 STEREO AM FM MHz TAPE MONITOR 12 MEMORY ENTER AUTO TUNING 0 20 AUX PHONO l00 SLEEP COPY PRESET STATIONS A/B/C/D/E 1 2 3 4 5 6 7 8 VOLUME RDS MODE/FREQ PTY SEEK EON TUNING MODE FM/AM TUNING DOWN EDIT MEMORY UP l8 l6 l4 20 l2 24 MODE START AUTO/MAN'L MONO l0 MAN'L/AUTO FM 28 8 34 6 4 40 PHONES l SPEAKERS A B ON ON OFF OFF BASS 0 TREBLE 0 l l l LOUDNESS FLAT l 3 50 -30dB 2 2 3 2 3 4 5 C DE F 2 3 4 B BALANCE 0 l l 4 5 2 3 4 5 G 2 3 2 3 4 5 4 L 5 H l 70 9 4 2 60 I0 3 0 –dB 8 5 R 5 6 7 I JK L M RX-395, RX-395RDS : RX-395RDS only 1 2 3 4 5 6 7 8 9 0 NATURAL SOUND STEREO RECEIVER TUNER POWER PRESET TAPE MONITOR STEREO AM FM MHz TAPE MONITOR 12 MEMORY ENTER AUTO TUNING 0 20 CD AUX PHONO l00 SLEEP PRESET STATIONS A/B/C/D/E 1 2 3 4 VOLUME RDS MODE/FREQ PTY SEEK EON TUNING MODE FM/AM DOWN TUNING EDIT MEMORY UP l8 5 6 7 l6 l4 20 8 l2 24 MODE START AUTO/MAN'L MONO l0 MAN'L/AUTO FM 28 8 34 6 4 40 PHONES SPEAKERS A B ON ON OFF OFF l BASS 0 TREBLE 0 l l l 2 2 6 2 3 4 5 G 2 3 4 C DE F LOUDNESS FLAT l 3 50 -30dB 3 B BALANCE 0 l l 3 4 5 4 5 H 5 2 2 3 3 4 4 L 5 5 R 2 I0 3 9 4 8 5 6 2 60 l 70 0 –dB 7 I JK L M Set the switch A or B (or both A and B) for the speaker system (connected to this unit) you will use to the ON position. Set the switch for the speaker system you will not use to the OFF position. D PTY SEEK MODE button RX-495RDS and RX-395RDS only When this button is pressed, the unit turns into the PTY SEEK mode. 2 Power indicator Lights up while the power is on. 3 Remote control sensor Receives signals from the remote control transmitter. E PTY SEEK START button 4 RDS MODE/FREQ button RX-495RDS and RX-395RDS only When an RDS station is received, pressing this button changes the display mode into the PS mode, PTY mode, RT mode and/or CT mode (if the station employs those RDS data services), and frequency display in turn. 5 Display panel Shows station frequencies and various information. (Refer to the next page for details.) 6 FM/AM buttons Press this button to switch the reception band to FM or AM. 7 TUNING DOWN/UP button Used for tuning. Press the “UP” side to tune in to higher frequencies, and press the “DOWN” side to tune in to lower frequencies. 8 EDIT button This button is used to exchange the places of two preset stations with each other. 9 MEMORY (MAN’L/AUTO FM) button When this button is pressed, the MEMO(RY) indicator flashes for about 5 seconds. During this period, press the desired PRESET STATIONS button to enter the displayed station into the memory. When this button is pressed and holded for about 3 seconds, the automatic preset tuning begins. 0 Input selector buttons Select a program source to listen to. When a button is pressed, the name of selected source lights up on the display. A PURE DIRECT switch RX-495RDS only Press this switch to listen to a source in the purest sound. (Refer to page 16 for details.) B PHONES jack When you listen with headphones, connect the headphones to the PHONES jack. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position. C SPEAKERS switches English 1 POWER switch Press this switch to switch the power on. Press it again to switch the power off. * Standby mode While the power is on, pressing the POWER key on the remote control transmitter switches the unit to the standby mode. (In this mode, the power indicator is half illuminated.) PHONES RX-495RDS and RX-395RDS only Press this button to begin searching for a station after the desired program type is selected in the PTY SEEK mode. F EON button RX-495RDS and RX-395RDS only Press this button to select a desired program type (NEWS, INFO, AFFAIRS, SPORT) when you want to call a radio program of that program type automatically. G TUNING MODE (AUTO/MAN’L) button Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that “AUTO (TUNING)” lights up on the display. To select the manual tuning mode, press this button so that “AUTO (TUNING)” goes off. H Tone controls BASS Used to increase or decrease the low frequency response. The 0 position produces flat response. TREBLE Used to increase or decrease the high frequency response. The 0 position produces flat response. I BALANCE control Adjusts the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions. J A/B/C/D/E button Press this button to select a desired group (A–E) of preset stations. K PRESET STATIONS buttons Used to enter as many as 40 station frequencies into the memory. L Continuously variable LOUDNESS control Used to compensate for the human ears’ loss of sensitivity to high and low-frequency ranges at low volume. M VOLUME control Used to raise or lower the volume level. 7 DISPLAY PANEL RX-495RDS, RX-395RDS 1 2 3 4 AUTO STEREO MHz MEMO PS 5 PTY RT CT PTY HOLD EON NEWS INFO AFFAIRS SPORT 6 7 8 9 0 20 l00 SLEEP 0 A RX-395RDS RX-495RDS TAPE MON TAPE MON 1 2 RX-395 1 3 PRESET STEREO FM MHz MEMORY TAPE MONITOR 5 8 4 A 0 AUTO TUNING 2 20 40 60 l00 SLEEP 0 2 AUTO (AUTO TUNING) indicator This indicator lights up when this unit is in the automatic tuning mode. 7 PTY HOLD indicator RX-495RDS and RX-395RDS only Lights up while the search is performed in the PTY SEEK mode. 8 EON indicator RX-495RDS and RX-395RDS only Lights up when an RDS station that employs the EON data service is received. 3 STEREO indicator Lights up when an FM stereo broadcast with sufficient signal strength is received. 9 Program type name indicators 4 Signal-level meter RX-495RDS and RX-395RDS only The name selected in the EON mode lights up. Indicates the signal level of the received station. If multipath interfernce is detected, the indication decreases. 0 SLEEP indicator 5 MEMO (MEMORY) indicator Lights up while the built-in SLEEP timer is functioning. When the MEMORY button is pressed, this indicator flashes for about 5 seconds. During this period, the displayed station can be programmed to the memory by using the A/B/C/D/E button and one of the PRESET STATIONS buttons. A TAPE MON (TAPE MONITOR) indicator 6 RDS mode indicators RX-495RDS When the first tape deck is selected as the input source by pressing the TAPE 1 button, “TAPE MON 1” lights up, and when the second tape deck is selected by pressing the TAPE 2 button, “TAPE MON 2” lights up. RX-495RDS and RX-395RDS only The name(s) of RDS mode(s) employed by the currently received RDS station light(s) up. Illumination of the indicator on the head of a name shows that the corresponding RDS mode is now selected. English 1 Multi-information display Displays various information, for example station frequency, preset station number and name of selected program source. RX-395, RX-395RDS Lights up when the tape deck is selected as the input source by pressing the TAPE MONITOR button. 9 CONNECTIONS Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other components to which connections are being made. CONNECTIONS WITH OTHER COMPONENTS When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual for each component to be connected to this unit. * If you have YAMAHA components numbered as 1, 2, 3, etc. on the rear panel, connections can be made easily by making sure to connect the output (or input) terminals of each component to the same-numbered terminals of this unit. RX-495RDS Speakers A LINE IN Tape deck 2 LINE OUT LINE IN LINE OUT Tape deck 1 GND OUTPUT Turntable Right Left (Europe model) GND FM ANT 75Ω UNBAL. SPEAKERS AC OUTLETS GND MAINS AM ANT A 3 or 5 4 or 6 TAPE PB REC OUT 3 4 TAPE PB REC OUT B PHONO CD 1 AUX TAPE 1 TAPE 2 A OR B : 8ΩMIN./SPEAKER A B : l6ΩMIN./SPEAKER l00W MAX. TOTAL SWITCHED AUDIO OUT OUTPUT To AC outlet Right Compact disc player Video cassette player, LD player, etc. : Refer to “ABOUT THE ACCESSORY TERMINALS” on page 12. 10 Left Speakers B English RX-395, RX-395RDS Speakers A LINE IN LINE OUT Tape deck GND OUTPUT Turntable Right Left (Europe model) GND FM ANT 75Ω UNBAL. SPEAKERS AC OUTLETS MAINS GND AM ANT A 3 or 5 4 or 6 TAPE PB REC OUT B PHONO CD 1 AUX TAPE A OR B : 8ΩMIN./SPEAKER A B : l6ΩMIN./SPEAKER l00W MAX. TOTAL SWITCHED AUDIO OUT OUTPUT To AC outlet Right Compact disc player Video cassette player, LD player, etc. Left Speakers B : Refer to “ABOUT THE ACCESSORY TERMINALS” on page 12. 11 CONNECTING SPEAKERS Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and – markings are observed. If these wires are reversed, the sound will be unnatural and will lack bass. Do not let the bare speaker wires touch each other and do not let them touch the metal parts of this unit as this could damage this unit and/or speakers. Notes One or two speaker systems can be connected to this unit. If you connect only one speaker system, connect it to either the SPEAKERS A or B terminals. ● Use speakers with the specified impedance shown on the rear of this unit. ● How to Connect: Red: positive (+) Black: negative (–) 2 1 3 ➀ Unscrew the knob. ➁ Insert the bare wire. [Remove approx. 5mm (1/4”) insulation from the speaker wires.] ➂ Tighten the knob and secure the wire. ABOUT THE ACCESSORY TERMINALS AC OUTLET(S) (SWITCHED) GND terminal (For turntable use) (Europe and Singapore models) ...... 2 SWITCHED OUTLETS (U.K. model) ........................................ 1 SWITCHED OUTLET Use these to connect the power cords from your components to this unit. The power to the SWITCHED outlets is controlled by this unit’s POWER switch or the provided remote control transmitter’s POWER key. These outlets will supply power to any component whenever this unit is turned on. The maximum power (total power consumption of components) that can be connected to the SWITCHED AC OUTLET(S) is 100 watts. Connecting the ground wire of the turntable to the GND terminal will normally minimize hum, but in some cases better results may be obtained with the ground wire disconnected. Use one of the two GND terminals on the rear of this unit for the connection. Turntable FM 75Ω ANT UNBAL GND or GND AM ANT 12 Loosen Tighten ● ● Each antenna should be connected to the designated terminals correctly, referring to the following diagram. Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may result in improvement. Outdoor FM antenna Outdoor AM antenna Indoor FM antenna (included) AM loop antenna (included) GND FM ANT 300-ohm feeder 75Ω UNBAL. GND AM ANT PHONO 75-ohm coaxial cable English ANTENNA CONNECTIONS CD 1 AUX 75-ohm/300-ohm antenna adapter Ground Connecting the AM loop antenna 1 2 ➀ ➂ ➁ 3 Orient so that the best reception is obtained. * The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall. * The AM loop antenna should be kept connected, even if an outdoor AM antenna is connected to this unit. GND terminal For maximum safety and minimum interference, connect the GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth. Notes ● When connecting the indoor FM antenna, insert its connector into the FM ANT terminal firmly. ● If you need an outdoor FM antenna to improve FM reception quality, either 300-ohm feeder or coaxial cable may be used. In locations troubled by electrical interference, coaxial cable is preferable. 13 BASIC OPERATIONS 3 2 4 1, 6 7 TO PLAY A SOURCE 1 4 Select the speakers to be used. SPEAKERS A B Set to the “ ∞ ” position. 2 Turn the power on. * 5 POWER ON ON OFF OFF If you use two speaker systems, press both the A and B switches. Play the source. (For detailed information on the tuning operation, refer to page 17.) 6 3 Select the desired input source by using the input selector buttons. RX-495RDS Adjust to the desired output level. TUNER MONITOR TAPE 2 TAPE 1 CD AUX PHONO 7 If desired, adjust the BASS, TREBLE, BALANCE and LOUDNESS controls, etc. (refer to page 16). COPY RX-395, RX-395RDS TUNER TAPE MONITOR CD AUX PHONO * The name of the selected input source will appear on the display. * Note that pressing on each input selector button selects the source which is connected to the corresponding input terminals on the rear panel. Notes RX-495RDS only ● If you select AUX, TUNER, CD or PHONO, be sure that TAPE 1 and/or TAPE 2 are not being selected. ● If you select TAPE 1 and TAPE 2 at the same time, the result will be the sound from the tape deck 1. ● For TAPE 1 and TAPE 2, whenever the button is pressed, the corresponding input source is selected or canceled alternately. RX-395 and RX-395RDS only ● Whenever the TAPE MONITOR is pressed, the tape deck is selected or canceled alternately. ● If both TAPE MONITOR and another input selector button are selected, TAPE MONITOR takes priority of another input selector button. To turn off the power Press the POWER switch again. 14 English TO RECORD A SOURCE TO TAPE 1, 4 2 RX-495RDS RX-395, RX-395RDS 1 1 Select the source to be recorded. TUNER MONITOR TAPE 2 TAPE 1 CD AUX Select the source to be recorded. TUNER TAPE MONITOR PHONO CD AUX PHONO COPY * To dub from tape to tape, refer to the “Notes” shown below. When you select AUX, TUNER, CD or PHONO, make sure that neither TAPE 1 nor TAPE 2 is also selected. * 2 3 4 * 2 Play the source and then turn the VOLUME control up to confirm the input source. (For detailed information on the tuning operations, refer to the page 17.) 3 Begin recording on the tape deck. To monitor the audio signals being recorded, press the input selector button for the tape deck being used to make the recording. TUNER MONITOR TAPE 2 TAPE 1 Play the source and then turn the VOLUME control up to confirm the input source. (For detailed information on the tuning operations, refer to the page 17.) Begin recording on the tape deck. To monitor the audio signals being recorded, press the TAPE MONITOR. TUNER TAPE MONITOR CD AUX 4 When you select AUX, TUNER, CD or PHONO, make sure that TAPE MONITOR is not also selected. CD AUX PHONO PHONO COPY Notes ● VOLUME, BASS, TREBLE, BALANCE, LOUDNESS controls and PURE DIRECT switch settings have no effect on the material being recorded. ● To dub from tape to tape, select TAPE 2 by pressing it. Only the following method of dubbing can be made by using this unit. RECORDER SOURCE Tape deck connected to the TAPE 2 terminals. Note VOLUME, BASS, TREBLE, BALANCE and LOUDNESS control settings have no effect on the material being recorded. → Tape deck connected to the TAPE 1 terminals. 15 Selecting the SPEAKER system Because one or two speaker systems can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once. SPEAKERS A B ON ON OFF OFF Using the PURE DIRECT switch RX-495RDS only You can enjoy the purest possible sound from your audio sources by pressing this switch inward. By doing so, the audio signal bypasses the BASS, TREBLE, BALANCE and LOUDNESS controls, eliminating any alterations to the audio signal. PURE DIRECT Adjusting the BALANCE control Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions. BALANCE l 0 l 2 Adjusting the continuously variable LOUDNESS control This control provides compensation for the human ears’ loss of sensitivity to high and low-frequency ranges at low volume. This control is adjustable to retain full tonal range at any volume level. 2 3 3 4 1 4 L 5 5 R LOUDNESS FLAT l Adjusting the BASS and TREBLE controls l0 3 9 4 8 5 BASS l 0 6 7 TREBLE l 2 l 2 3 3 4 4 5 5 0 l 2 2 3 3 4 4 5 2 VOLUME 5 l8 l6 l4 20 l2 24 BASS Set to the “FLAT” position. 30 dB 2 : Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response. l0 28 8 34 6 4 40 3 50 2 60 TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response. Set to the loudest listening level that you would listen to. l 70 0 –dB 3 LOUDNESS l FLAT 30 dB 2 l0 3 9 4 8 5 16 6 7 Turn until the desired volume is gained. Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING). 2 1 3 AUTOMATIC TUNING 1 MANUAL TUNING Select the reception band (FM or AM) confirming it on the display. 1 Select the reception band (FM or AM) confirming it on the display. FM/AM FM/AM FM 2 English TUNING OPERATIONS or AM 2 TUNING MODE 3 RX-495RDS,RX-395RDS AUTO TUNING AM TUNING MODE Turn “AUTO (TUNING)” off. AUTO/MAN'L MONO AUTO/MAN'L MONO RX-395 or FM Tune to a desired station manually. DOWN TUNING UP AUTO * To continue tuning search, press and hold the button. 3 DOWN TUNING UP Notes • If you tune to an FM station manually, it is received in monaural mode automatically to increase the signal quality. • RX-495RDS and RX-395RDS only When tuned in to a station, the frequency of the received station is shown on the display. If an RDS station that employs PS data service is received, the frequency is then replaced by the station name. Refer to page 24 for details. To tune to a higher frequency, press the right side once. To tune to a lower frequency, press the left side once. * If the station where tuning search stops is not the desired one, press again. * If the tuning search does not stop at the desired station (because the signals of the station are weak), change to the MANUAL TUNING method. 17 PRESET TUNING MANUAL PRESET TUNING This unit can store station frequencies (selected by tuning operation) by using the PRESET STATIONS buttons. With this function, you can recall any desired station by only pressing the corresponding PRESET STATIONS button. Up to 40 stations (8 stations x 5 groups) can be stored. 2 4 3 To store stations 1 2 Tune to a desired station. (Refer to the previous page for tuning procedure.) 4 Select a preset station number where you want to program the station before “MEMO(RY)” goes off from the display. Select a desired group (A – E) of preset stations confirming it on the display. PRESET STATIONS 1 2 3 4 5 6 7 8 A/B/C/D/E RX-395 PRESET FM RX-395 RX-495RDS, RX-395RDS MHz 0 20 40 60 l00 RX-495RDS, RX-395RDS Shows the displayed station has been programmed to A1. PRESET MHz PS 3 MAN'L/AUTO FM MEMORY RX-495RDS, RX-395RDS MEMO Flashes on and off for about 5 seconds. 18 l00 * In the same way, program other stations to A2, A3 ... A8. * You can program more stations to preset station numbers on other groups in the same way by selecting other groups in step 2. MEMORY RX-395 0 20 PTY RT CT English 1 2 To recall a preset station 1 Notes A new setting can be programmed in place of the former one. ● For presets, the setting of the reception mode (stereo or monaural) is stored along with the station frequency. Select the group of preset stations. ● A/B/C/D/E RX-395 RX-495RDS, RX-395RDS Memory back-up The memory back-up circuit prevents the programmed data from being lost even if the POWER switch is set off or the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than one week, the memory may be erased. If so, it can be re-programmed by simply following the PRESET TUNING steps. PRESET 2 Select the preset station number. PRESET STATIONS RX-395 1 2 3 4 5 6 7 8 RX-495RDS, RX-395RDS PRESET 19 AUTOMATIC PRESET TUNING You can also make use of an automatic preset tuning function for FM stations only. By this function, this unit performs automatic tuning and stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on page 18. * RX-495RDS and RX-395RDS only Only RDS stations can be stored by this function. 1 To store stations 1 When the automatic preset tuning is finished FM/AM FM 2 2 MEMORY MAN'L/AUTO FM Press and hold for about 3 seconds. The display shows the frequency of the last preset station. Check the contents and the number of preset stations by following the procedure of the section “To recall a preset station” on page 19. To recall a preset station Simply follow the procedure of the section “To recall a preset station” on page 19. * RX-495RDS and RX-395RDS only A recalled station is shown by the frequency or station name on the display. RX-395 Flashes. MEMORY AUTO TUNING RX-495RDS,RX-395RDS Notes ● If no station is received by the automatic preset tuning search, the search finishes after “NOTHING” flashes for about 3 seconds on the display. ● You can replace a preset station by another FM or AM station manually by simply following the procedure of the section “To store stations” on page 18. RX-395 only If the number of received stations is not enough to be stored up to E8, the search will be finished automatically when it reaches the highest frequency after searching through all frequencies. ● With this function, only FM stations with sufficient signal strength are stored automatically. If the station you want to program is weak in signal strength, tune to it in monaural manually and program it by following the procedure of the section “To store stations” on page 18. ● Flashes. MEMO AUTO The automatic preset tuning begins from A1. Received stations are programmed to A1, A2 ... A8 sequentially. * If more than 8 stations are received, they are also programmed to the preset station numbers on other groups (B, C, D and E) in that order. RX-495RDS and RX-395RDS only The automatic preset tuning search is performed through all RDS network frequencies until stations are stored up to E8. If the number of received stations is not enough to be stored up to E8, the search will be finished automatically after searching all frequencies. ● With this function, only RDS stations with sufficient signal strength are stored automatically. If the station you want to program is weak in signal strength, tune to it in monaural manually and program it by following the procedure of the section “To store stations” on page 18. * There may be a case that this function cannot receive a station which could be received by the automatic tuning method. This is because this function receives a large volume of PI (Program Identification) data along with the station. ● RX-395 only If you want to store the first station received by the automatic preset tuning to a desired preset station number. If, for example, you want to store the first received station to C5, select “C5” by using the A/B/C/D/E button and the PRESET STATIONS buttons after pressing the MEMORY button in step 2 before the automatic preset tuning begins. The first received station is stored to C5, and next stations to C6, C7 ... sequentially. If stations are stored up to E8, the automatic preset tuning is finished automatically. 20 English EXCHANGING PRESET STATIONS You can exchange the places of two preset stations with each other as shown below. 2, 4 Example) If you want to shift the preset station on E1 to A5, and vice versa. 1 Recall the preset station on E1 (by following the method of “To recall a preset station” on page 19). 2 4 EDIT EDIT RX-395 RX-395 RX-495RDS, RX-395RDS RX-495RDS, RX-395RDS MEMO MEMORY Flashes. 3 Shows the exchange of stations is completed. Flashes. Next, recall the preset station on A5 by following the same method with step 1. RX-395 MEMORY Flashes. RX-495RDS, RX-395RDS MEMO Flashes. 21 In areas where RDS broadcasts cannot be received, the RDS broadcast functions do not operate. (The procedures from page 22 to page 26 are not necesssary.) RECEIVING RDS STATIONS RX-495RDS and RX-395RDS only RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal. RDS data contains various information, such as PI (Program Identification), PS (Program Service name), PTY (Program Type), RT (Radio Text), CT (Clock Time), EON (Enhanced Other Networks), etc. RDS function is carried out among the network stations. * This unit utilizes PI, PS, PTY, RT, CT and EON to receive RDS broadcast stations. Displaying RDS data AUTO STEREO 0 20 PS PTY RT CT l00 EON NEWS INFO AFFAIRS SPORT This unit can be turned into the following five modes to display RDS data. PS (Program Service name) mode: CT (Clock Time) mode: Displays the name of the RDS station now being received instead of the frequency. Displays current time. This signal comes from the RDS station now being received. PTY (Program Type) mode: EON (Enhanced Other Networks) mode: Displays the type of the program on the RDS station now being received. There are 15 program types to classify RDS stations. Refer to the next page for details. RT (Radio Text) mode: Displays information about the program (such as title of the song, name of the singer, etc.) on the RDS station now being received. 22 Automatically receives a program of the designated program type when its broadcast starts, in place of the program now being received. When the broadcast of the called program ends, the previously received program (or another program on the same station) is recalled. English Programs types in the PTY mode NEWS News: Short accounts of facts, events and publicly expressed views, reportage and actuality. AFFAIRS Current affairs: Topical program expanding or enlarging upon the news, generally in different presentation style or concept, including documentary debate, or analysis. INFO SPORT Information: Program whose purpose is to impart advice in the widest sense, including meteorological reports and forecasts, consumer affairs, medical help, etc. Sport: Program concerned with any aspect of sport. VARIED Varied: Used for mainly speech-based programs usually of light-entertainment nature, not covered by above categories. Examples are: quizzes, panel games, personality interviews, comedy and satire. POP M Pop: Commercial music, which would generally be considered to be of current popular appeal, often featuring in current or recent record sales charts. ROCK M Rock: Contemporary modern music, usually written and performed by young musicians. M.O.R. M M.O.R.: (Middle of the Road Music). Common term to describe music considered to be “easylistening”, as opposed to Pop, Rock or Classical. Music in this category is often but not always, vocal, and usually of short duration (<5 min.) EDUCATE Education: Program intended primarily to educate, of which the formal element is fundamental. DRAMA Drama: All radio plays and serials. LIGHT M CULTURE Culture: Programs concerned with any aspect of national or regional culture, including religious affairs, philosophy, social science, language, theatre, etc. Light classics: Classical Musical for general, rather than specialist appreciation. Examples of music in this category are instrumental music, and vocal or choral works. CLASSICS Serious classics: Performances of major orchestral works, symphonies, chamber music etc., and including Grand Opera. OTHER M Other music: Musical styles not fitting into any of the above categories. Particularly used for specialist music, of which Jazz, Rhythm & Blues, Folk, Country, and Reggae are examples. SCIENCE Science: Programs about the natural sciences and technology. 23 Changing the RDS modes When an RDS station is received, “PS”, “PTY”, “RT” and/or “CT” that correspond to the RDS data services employed by the station light up on the display. By pressing the RDS MODE/FREQ button once or more, you can change the display mode among the RDS modes employed by the received station in the order shown below. (The RDS mode not employed by the station cannot be selected.) Illumination of the indicator on the head of a name of RDS mode shows that the corresponding RDS mode is now selected. * When an RDS station is received, do not press the RDS MODE/FREQ button until one or some names of RDS modes light up on the display. If the button is pressed before one or some names light up on the display, the mode cannot be changed. This is because the unit has not received all of the RDS data on the station yet. * If no name of RDS mode lights up on the display, the mode cannot be changed. PS mode The name of the station being received is displayed. If the station does not employ the PS data service, this mode will not be selected. PTY mode The type of the program on the station being received is displayed. If the station does not employ the PTY data service, this mode will not be selected. (You can make this unit search for a station which is broadcasting a program of your desired program type. For details, refer to the next page.) RT mode Information about the program on the station being received is displayed. Information is displayed by a maximum of 64 Roman Alphabets including umlaut sign. If other characters are used on the RT data, they are displayed with under-bars. If the station does not employ the RT data service, this mode will not be selected. CT mode Current time is displayed in the following form. The CT data from the station being received changes every minute. RDS MODE/FREQ Hour Minute If the data is accidentally cut off, “CT WAIT” may light up. If the station does not employ the CT data service, this mode will not be selected. Frequency display mode The frequency of the station being received is displayed. Notes RDS data service cannnot be utilized by this unit if the received signal is not strong enough. Especially, the RT (Radio Text mode) needs much data to be received, so it may occur that RT mode cannot be displayed even if other RDS modes (PS, PTY, etc.) are displayed. ● There may be a case that RDS data reception is not possible due to poor reception conditions. If so, press the TUNING MODE button so that “AUTO (AUTO TUNING)” goes off from the display. Though the reception mode is changed to monaural by this operation, when you change the display to an RDS mode, RDS data may be displayed. ● If the signal strength gets weakened by external interference during receiving an RDS station, the RDS data service may be cut off suddenly and “... WAIT” will light up on the display. ● 24 English Calling a program of your desired program type from among preset RDS stations (PTY SEEK) By designating a program type, the unit automatically searches all preset stations for an RDS station which broadcasts a program of that program type. * There are 15 program types to classify RDS stations. For details, refer to page 23. 3 1 1 3 Turn the unit into the PTY SEEK mode. PTY SEEK 2 EON Begin searching all preset RDS stations. PTY SEEK EON AUTO STEREO MODE START MODE 0 20 START PS Flashes. Flashes. * The program type of the station now being received or “NEWS” flashes on the display. 2 * “PTY HOLD” lights up on the display. ● Select the desired program type. DOWN TUNING UP PTY RT CT PTY HOLD ● ● If a station which broadcasts a program of the program type is found, the unit stops at the station and displays the frequency of the station. If the station has PS data, after that, it turns into the PS mode. If the called station is not the desired one, press the PTY SEEK START button once more. The unit begins searching for another station which brodcasts a program of the same program type. If no station is found, “NOTHING” appears and then returns to frequency display. If the station has PS data, after that, it turns into the PS mode. * If the PTY SEEK START button is pressed once more during searching, this mode is canceled and turns into the frequency display. If the station has PS data, after that, it turns into the PS mode. To cancel this function If the PTY SEEK MODE button is pressed once more, the PTY SEEK mode is canceled and turns into the frequency display. If the station has PS data, after that, it turns into the PS mode. 25 Making this unit call a program of your desired program type automatically when its broadcast starts This function uses the EON (Enhanced Other Networks) data service on the RDS station network. By only selecting a desired program type (NEWS, INFO, AFFAIRS or SPORT), this unit automatically searches all preset RDS stations for a station that broadcasts a program of that program type in the background, and, if found, receives a program when its broadcast starts in place of the program now being received. * This function can be used only when an RDS station that employs the EON data service is received. (When such a station is received, “EON” lights up on the display.) 2 1 3 Make sure that “EON” is illuminated on the display. When the broadcast of the called program ends, the previously received program (or another program on the same station) is recalled. STEREO MHz PS 0 20 l00 EON PTY RT CT PS * If “EON” is not illuminated on the display, receive an (or another) RDS station so that “EON” lights up on the display. 2 Select a desired program type, NEWS, INFO, AFFAIRS or SPORT. PTY SEEK MODE EON START MHz PS PTY RT CT EON NEWS INFO AFFAIRS SPORT Lights up. Press once or more. The search is performed among all preset RDS stations in the background. If a program is found, the program is automatically received when its broadcast starts. PS PTY RT CT EON NEWS INFO AFFAIRS SPORT Flashes. 26 PTY RT CT EON To cancel this function Press the EON button once or more, so that no program type name lights up on the display. Battery installation English NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Remote control transmitter operation range 2 Remote control sensor 1 3 Within approximately 6 m (19.7 feet) 30° 30° Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement. ● Be sure the polarities are correct. (See the illustration inside the battery compartment.) ● Remove the batteries if the remote control transmitter will not be used for an extended period of time. ● If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. Notes ● There should be no large obstacles between the remote control transmitter and the main unit. ● If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting. 27 TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM Amplifier REMEDY Power cord is not plugged in or is not completely inserted. Firmly plug in the power cord. No sound. Incorrect output cord connections. Connect the cords properly. If the problem persists, the cords may be defective. Appropriate input selector button is not pressed. Press the appropriate input selector button corresponding to the input source. The SPEAKERS switches are not set properly. Set the SPEAKERS switch that corresponds to the speakers to be used to the ON position. Speaker connections are not secure. Secure the connections. The protection circuit has been activated because of short circuit etc. Turning the unit off and then on will reset the protection circuit. The SLEEP timer functioned. Cancel the SLEEP timer function. Incorrect setting of the BALANCE control. Adjust it to the appropriate position. Incorrect cord connections. Connect the cords properly. If the problem persists, the cords may be defective. There is a lack of bass, and no ambience. The + and – wires are connected in reverse at this unit or speakers. Connect the speaker wires in the correct phase (+ and –). Sound “hums”. Incorrect cord connections. Firmly connect the audio plugs. If the problem persists, the cords may be defective. No connection from the turntable to the GND terminal. Make the GND connection between the turntable and this unit. Sound level is low. The LOUDNESS control is functioning. Set the LOUDNESS control to the FLAT position. The volume level is low while playing a record. The record is being played on a turntable with an MC cartridge. The player should be connected to the unit through an MC head amplifier (available separately). The volume level cannot be increased, or sound is distorted. The power to the component connected to the REC OUT terminals of this unit is off. Turn the power to the component on. FM stereo reception is noisy. Because of the characteristics of FM stereo broadcasts, this is limited to cases where the transmitter is too far away or the antenna input is poor. Check the antenna connections. Try using a high quality directional FM antenna. Set the TUNING MODE button to the manual tuning mode. There is distortion and clear reception cannot be obtained even with a good FM antenna. There is multipath interference. Adjust antenna placement to eliminate multipath interference. A desired station cannot be tuned in with the automatic tuning method. The station is too weak. Use the manual tuning method. Use a high quality directional FM antenna. Previously preset stations can no longer be tuned in. The tuner has been unplugged for a long period. Repeat the presetting procedure. A desired station cannot be tuned in with the automatic tuning method. Weak signal or loose antenna connections. Tighten the AM loop antenna connections and rotate it for best reception. There are continuous crackling and hissing noises. Noises will result from ligtning, fluorescent lamps, motors, thermostats and other electrical equipment. Use an outdoor antenna and a ground wire. This will help somewhat but it is difficult to eliminate all noise. There are buzzing and whining noises (especially in the evening). A television set is being used nearby. Relocate this unit away from the TV. The remote control transmitter does not work. Direct sunlight or lighting (of an inverter type of flourescent lamp etc.) is striking the remote control sensor of the main unit. Change the position of the main unit. The batteries of this remote control transmitter are too weak. Replace the batteries with new ones. The power to this unit is off. Turn the power to this unit on. The sound suddenly goes off. FM CAUSE The unit fails to turn on when the POWER switch is pressed. Only one side speaker outputs the sound. Others Remote control transmitter AM Use the manual tuning method. 28 The sound is degraded when listening with the headphones connected to the compact disc player or cassette deck that are connected with this unit. AUDIO SECTION Minimum RMS Output Power per Channel 8 ohms, 20 Hz to 20 kHz, 0.04% THD <RX-495RDS> ...........................................70W+70W <RX-395, RX-395RDS> .............................45W+45W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) <RX-495RDS> 8/6/4/2 ohms ..................................100/120/145/170W <RX-395, RX-395RDS> 8/6/4/2 ohms ..........................................68/75/85/95W DIN Standard Output Power per Channel 4 ohms, 1 kHz, 0.7% THD [Europe model only] <RX-495RDS> ...................................................100W <RX-395, RX-395RDS> .......................................55W IEC Power 8 ohms, 1 kHz, 0.04% THD [Europe model only] <RX-495RDS> .....................................................80W <RX-395, RX-395RDS> .......................................50W Headphone Jack Rated Output/Impedance Output Level (8 ohms, 0.04% THD) <RX-495RDS> .....................................................0.48V <RX-395, RX-395RDS> .......................................0.45V Impedance <RX-495RDS>...............................................390 ohms <RX-395, RX-395RDS> ................................330 ohms Frequency Response (20 Hz to 20 kHz) CD/TAPE/AUX .................................................0±0.5 dB RIAA Equalization Deviation PHONO MM.....................................................0±0.5 dB Total Harmonic Distortion PHONO MM to REC OUT 20 Hz to 20 kHz, 1V ...........................................0.02% CD/TAPE/AUX to SP OUT 20 Hz to 20 kHz, 35W/8 ohms ...........................0.02% Signal-to-Noise Ratio (IHF-A Network) PHONO MM to REC OUT (5 mV Input Shorted) ............................................82 dB CD/TAPE/AUX to SP OUT (Input Shorted) .........108 dB Power Band Width <RX-495RDS> 8 ohms, 35W, 0.08% THD....................10 Hz to 50 kHz <RX-395, RX-395RDS> 8 ohms, 22.5W, 0.08% THD.................10 Hz to 50 kHz Residual Noise (IHF-A Network)...........................100 µV Damping Factor 8 ohms, 20 Hz to 20 kHz ............................100 or more Tone Control Characteristics BASS: Boost/cut ....................................±10 dB (50 Hz) Turnover Frequency .............................(350 Hz) TREBLE: Boost/cut ..............................±10 dB (20 kHz) Turnover Frequency ........................(3.5 kHz) Input Sensitivity/Impedance PHONO MM......................................2.5 mV/47 k-ohms CD/TAPE/AUX..................................150 mV/47 k-ohms Maximum Input Signal (1 kHz, 0.04% THD) PHONO MM.........................................................90 mV English SPECIFICATIONS Channel Separation (Vol. –30 dB, EFFECT OFF) CD/TAPE/AUX (Input 5.1 k-ohms Terminated, 1 kHz) ................60 dB Continuous Loudness Control...................– 30 dB (1 kHz) (Level related equalization) Output Level REC OUT...........................................................150 mV 29 FM SECTION AUDIO SECTION Tuning Range .....................................87.5 to 108.0 MHz Usable Sensitivity (75 ohms) DIN, Mono (S/N 26 dB) .......................................0.9 µV DIN, Stereo (S/N 46 dB) ......................................24 µV Output Level/Impedance FM (1 kHz, 40 kHz Dev.) ........................................................500 mV/2.2 k-ohms AM (30% mod., 1 kHz) ........................................................150 mV/2.2 k-ohms Image Response Ratio ...........................................80 dB GENERAL Power Supply .........................................AC 230V, 50 Hz IF Response Ratio ..................................................80 dB Spurious Response Ratio .......................................70 dB Power Consumption <RX-495RDS> ...................................................120W <RX-395, RX-395RDS> .....................................145W AM Suppression Ratio ............................................55 dB Capture Ratio.........................................................1.5 dB Selectivity (two signals, ±300 kHz, 40 kHz Dev.) ................................................................................70 dB Signal-to-Noise Ratio (DIN-Weighted, 40 kHz Dev.) Mono/Stereo ...................................................................75 dB/70 dB Harmonic Distortion Mono/Stereo (1kHz, 40 kHz Dev.) ......................................................................0.1%/0.2% Stereo Separation (1 kHz, 40 kHz Dev.).............................................50 dB AC Outlets 2 SWITCHED OUTLETS [Europe model]...................................100W max. total 1 SWITCHED OUTLET [U.K. model] .......................................100W max. total Dimensions (W x H x D) ...............435 x 146 x 308.5 mm Weight <RX-495RDS>.....................................................7.8 kg <RX-395, RX-395RDS> ......................................6.5 kg Accessories...........................................AM loop antenna Indoor FM antenna Remote control transmitter Batteries Frequency Response 20 Hz to 15 kHz ..............................................0 ±1.5 dB Specifications are subject to change without notice. AM SECTION Tuning Range .......................................531 to 1,611 kHz Usable Sensitivity .............................................100 µV/m Selectivity................................................................32 dB Signal-to-Noise Ratio ..............................................50 dB Image Response Ratio ...........................................40 dB Spurious Response Ratio .......................................50 dB Harmonic Distortion (1 kHz) .....................................0.3% 30 FM GEDEELTE AUDIO GEDEELTE Afstembereik ......................................87,5 tot 108,0 MHz Uitgangsniveau/Impedantie FM (1 kHz, 40 kHz Afw.)...................500 mV/2,2 k-ohm AM (30% mod., 1 kHz)......................150 mV/2,2 k-ohm Effectieve Gevoeligheid (75 ohm) DIN, Mono (Signaal/Ruis 26 dB) .........................0,9 µV DIN, Stereo (Signaal/Ruis 46 dB) ........................24 µV ALGEMEEN Spanningsvereisten ................230V, 50 Hz wisselstroom Spiegelfrekwentie Verhouding ...............................80 dB IF Frekwentiebereik Verhouding .............................80 dB Stroomverbruik <RX-495RDS> .....................................................120W <RX-395, RX-395RDS> .......................................145W Parasitaire Frekwentieverhouding ..........................70 dB AM Ruisonderdrukkingsverhouding ........................55 dB Opvangfrekwentieverhouding ................................1,5 dB Selectiviteit (twee signalen, ±300 kHz, 40 kHz Afw.) ................................................................................70 dB Signaal/Ruisverhouding (DIN-norm, 40 kHz Afw.) Mono/Stereo.......75 dB/70 dB Harmonische Vervorming (1 kHz, 40 kHz Afw.) Mono/Stereo ...............0,1%/0,2% Stereo Scheiding (1 kHz, 40 kHz Afw.)...................50 dB Frekwentiebereik 20 Hz tot 15 kHz ..............................................0±1,5 dB AM GEDEELTE Afstembereik ........................................531 tot 1.611 kHz Netspanningsuitgangen (AC OUTLETS) 2 GESCHAKELDE NETSPANNINGSUITGANGEN [Modellen voor Europa] .......................................Max. totaal vermogen: 100W 1 GESCHAKELDE NETSPANNINGSUITGANG [Modellen voor Groot-Brittannië] .......................................Max. totaal vermogen: 100W Afmetingen (L x H x B) .................435 x 146 x 308,5 mm Gewicht <RX-495RDS>.....................................................7,8 kg <RX-395, RX-395RDS> ......................................6,5 kg Toebehoren.............................................AM Lusantenne FM Binnenantenne Afstandbediening Batterijen Alle specificaties zijn onder voorbehoud en kunnen zondere nadere kennisgeving worden gewijzigd. Effectieve Gevoeligheid ....................................100 µV/m Selectivitei...............................................................32 dB Signaal/Ruisverhouding ..........................................50 dB Spiegelfrekwentie Verhouding ................................40 dB Parasitaire Frekwentieverhouding ......................... 50 dB Harmonische Vervorming (1 kHz) ............................0,3% YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA VU27700
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31

Yamaha RX-395RDS Manual de usuario

Categoría
Receptores de medios de coche
Tipo
Manual de usuario
Este manual también es adecuado para