Sylvania 6620LDG Manual de usuario
- Categoría
- Reproductores de DVD
- Tipo
- Manual de usuario
Este manual también es adecuado para
If you need additional operating assistance
after reading this owner's manual or to order
replacement accessories, please call
TOLL FREE : 1-800-968-3429.
Or visit our WEB SITE at
http://www.SylvaniaConsumerElectronics.com
6620LDG (20 inch)
EN - 2 -
IMPORTANT SAFEGUARDS
PRECAUTIONS
The caution marking is located on the rear of the cabinet.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE CONSTITUTING
A RISK OF ELECTRIC SHOCK IS
PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
1. Read instructions - All the safety and operating instructions should
be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should
be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operat-
ing instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be
followed.
5.
Cleaning - Unplug the unit from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
EXCEPTION: A product that is meant for uninterrupted service
and, that for some specific reason, such as the possibility of the loss
of an authorization code for a CATV converter, is not intended to be
unplugged by the user for cleaning or any other purpose, may
exclude the reference to unplugging the appliance in the cleaning
description otherwise required in item 5.
6. Attachments - Do not use attachments not recommended by the
unit manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this unit near water - for exam-
ple, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, and the like.
8. Accessories - Do not place this unit on an unstable
cart, stand, tripod, bracket, or table. The unit may
fall, causing serious injury to someone, and serious
damage to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by the manu-
facturer, or sold with the unit. Any mounting of the appliance should
follow the manufacturer’s instructions and should use a mounting
accessory recommended by the manufacturer. An appliance and cart
combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart combi-
nation to overturn.
Ameubles - Cet appareil ne doit être placé que sur
un meuble (avec ou sans roulettes) recommandé
par le fabricant. Si vous l’installez sur un meuble à
roulettes, déplacez les deux ensembles avec pré-
caution. Un arrêt brusque, l’utilisation d’une force
excessive et des surfaces irrégulières risquent de
déstabiliser l’ensemble et de le renverser.
9. Ventilation - Slots and openings in the cabinet and the back or bot-
tom are provided for ventilation and to ensure reliable operation of
the unit and to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be blocked by
placing the unit on a bed, sofa, rug, or other similar surface. This
unit should never be placed near or over a radiator or heat register.
This unit should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manu-
facturer’s instructions have been adhered to.
10. Power Sources - This unit should be operated only from the type of
power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance deal-
er or local power company. For the units intended to operate from
battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This unit is equipped with a polar-
ized alternating-current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still
fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. Power-Cord Protection - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the
appliance.
13. Outdoor Antenna grounding - If an outside antenna or cable sys-
tem is connected to the unit, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National Electrical
Code, ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of grounding con-
ductors, location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode. (Fig. A)
PORTABLE CART WARNING
S3126A
SYMBOLE D'AVERTISSEMENT POUR
LES COMPOSANTES
APPAREIL ET MEUBLE A ROULETTES
S3126A
GROUND CLAMPS
NEC - NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
S2898A
WIRE
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRODE SYSTEM
(NEC ART 250, PART H)
SERVICE
EQUIPMENT
CLAMP
ANTENNA
LEAD IN
ANTENNA
POWER SERVICE GROUNDING
GROUND
ELECTRIC
FIGURE A
- 3 - EN- 3 - EN
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
FCC WARNING- This equipment may generate or use
radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the mod-
ifications are expressly approved in the owner’s manual.
The user could lose the authority to operate this equipment
if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful inter-
ference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2)
Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
4)
Consult the dealer or an experienced radio/TV technician for help.
LASER SAFETY
This unit employs a laser. Only a qualified service person
should remove the cover or attempt to service this device,
due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZ-
ARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIA-
TION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHA-
NISM.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can
be reused. Please dispose of any materials in accordance
with your local recycling regulations.
Batteries should never be thrown away or incinerated but
disposed of in accordance with your local regulations con-
cerning chemical wastes.
The serial number of this product may be found on the back of the unit. No other unit has the same serial number as yours.
You should record the number and other vital information here and retain this book as a permanent record of your purchase
to aid identification in case of theft. Serial numbers are not kept on file.
14.
Lightning-For added protection for this unit receiver during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and dis-
connect the antenna or cable system. This will prevent damage
to the unit due to lightning and power-line surges.
15.
Power Lines-An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
16.Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17.
Object and Liquid Entry-Never push objects of any kind
into this unit through openings as they may touch dangerous
voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the unit.
18.
Servicing-Do not attempt to service this unit yourself as opening
or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
19.Damage Requiring Service-Unplug this unit from the wall
outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b.
If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the oper-
ating instructions. Adjust only those controls that are cov-
ered by the operating instructions, as improper adjustment
of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the unit to its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performance,
this indicates a need for service.
20.
Replacement Parts-When replacement parts are required, be
sure the service technician has used replacement parts speci-
fied by the manufacturer that have the same characteristics as
the original part. Unauthorized substitutions may result in fire,
electric shock, injury to persons or other hazards.
21.
Safety Check-Upon completion of any service or repairs to this
unit, ask the service technician to perform routine safety checks
to determine that the unit is in proper operating condition.
22.Heat-This unit product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
EN - 4 -
BatteriesRemote Control Unit
2 AA Batteries( NE240UD )
Owner’s Manual
( 1EMN21903 )
SUPPLIED ACCESSORIES
•
If you need to replace these accessories, please refer to the PART NO. under the illustrations and call our
help line mentioned on the front page.
•
Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators
(Splitter). Contact your local electronics store for these items.
For safe operation and satisfactory performance of
your unit, keep the following in mind when selecting
a place for its installation:
•
The stand of this TV is
folded when you purchased.
Place this TV face-down
on a flat surface covered
with the soft cloth.
•
Bend the stand slowly to
forward until it clicks.
•
If you want to fold the stand again,
insert a thin rod into the hole in
the right side of the stand as
illustrated, bend the stand back-
ward while you keep pushing the
hole.
•
Shield it from direct sunlight and
keep it away from sources of intense heat.
•
Avoid dusty or humid places.
•
Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the ventilation
holes at the top or bottom of the unit. Do not place
the unit on a carpet because this will block the
ventilation holes.
•
Install unit in a horizontal position.
•
Avoid locations subject to strong vibration.
•
Do not place the unit near strong magnetic fields.
•
Avoid moving the unit to locations where
temperature differences are extreme.
•
Be sure to remove a disc and unplug the AC power
cord from the outlet before carrying the unit.
•
Do not handle the power cord with wet hands.
•
Do not pull on the power cord when disconnecting
it from an AC wall outlet. Grasp it by the plug.
•
If by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
•
Do not put your fingers or objects into the unit disc slot
.
•
Do not place anything directly on top of the unit.
Moisture condensation may occur inside the unit when
it is moved from a cold place to a warm place or after
heating a cold room or under conditions of high humid-
ity. If a DVD is played in a unit which has moisture, it
may damage the DVD and the unit. Therefore when the
condensation occurs inside the unit, turn the unit on
and allow at least 2 hours for the unit to dry out.
The following symbols below appear in some head-
ings in this manual.
: Description refers to playback of DVD video discs
(in the DVD mode).
: Description refers to playback of Audio CDs
(in the DVD mode).
: Description refers to playback of CD-RW/-R with
MP3 files (in the DVD mode).
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).
You can adjust the stand to change the angle of the
TV (-5° to 10°).
QUICK
TO AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
LOCATION
MOISTURE WARNING
SYMBOLS USED IN THIS MANUAL
TILT STAND
10˚
-5˚
Do not bend from this side.
- 5 - EN
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . .2
SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . .4
LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
TO AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . .4
MOISTURE WARNING . . . . . . . . . . . . . . . . . . . . . . . .4
SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . . . .4
TILT STAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . .5
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . .7
INSTALLING THE BATTERIES . . . . . . . . . . . . . . . . . .8
PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . . .9
ANTENNA/CABLE CONNECTION . . . . . . . . . . . . . . . .9
EXTERNAL CONNECTION . . . . . . . . . . . . . . . . . . . . .10
TV OPERATION AND SETTINGS . . . . . . . . . . . . . . . . .11
INITIAL SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . . .11
CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .12
PICTURE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . .13
BACK LIGHT SETTING . . . . . . . . . . . . . . . . . . . . . . .13
SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . . . .14
MTS (Multi-Channel Television Sound) System . . . . . .14
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
TV RATING SET UP . . . . . . . . . . . . . . . . . . . . . .15
MPAA RATING SET UP . . . . . . . . . . . . . . . . . . .16
CHANGE ACCESS CODE . . . . . . . . . . . . . . . . .16
MENU LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . .16
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . .17
UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . .17
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . .18
DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
STEP BY STEP PLAYBACK . . . . . . . . . . . . . . . . . . .19
FAST FORWARD / FAST REVERSE . . . . . . . . . . . . .20
SLOW FORWARD / SLOW REVERSE . . . . . . . . . . . .20
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . .21
TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
TITLE / CHAPTER SEARCH . . . . . . . . . . . . . . . . . . .21
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
MARKER SET UP SCREEN . . . . . . . . . . . . . . . . . . .22
SPECIAL PLAYBACK FUNCTION . . . . . . . . . . . . . . . . .23
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .24
CHANGING THE SETTINGS . . . . . . . . . . . . . . . . . . . . .25
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . . . .25
AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . .25
STEREO SOUND MODE . . . . . . . . . . . . . . . . . . . . . .25
CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . .26
BLACK LEVEL SETTING . . . . . . . . . . . . . . . . . . . . . .26
VIRTUAL SURROUND . . . . . . . . . . . . . . . . . . . . . . . .26
THE ON-SCREEN INFORMATION . . . . . . . . . . . . . . . . .27
CHANGING THE DVD SET UP ITEMS . . . . . . . . . . . . . .28
CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
LANGUAGE SETTING . . . . . . . . . . . . . . . . . . . .28
DISPLAY SETTING . . . . . . . . . . . . . . . . . . . . . .28
AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . . . .29
PARENTAL CONTROL . . . . . . . . . . . . . . . . . . . .29
OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . . .30
INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . . . .31
CABLE CHANNEL DESIGNATIONS . . . . . . . . . . . . .31
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . .32
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
- 5 - EN- 5 - EN- 5 - EN- 5 - EN
TABLE OF CONTENTS
TV SECTION
D
D
VD SECTION
VD SECTION
A
B
C
D
E
F
G
H
EN - 6 -
•
MTS/SAP Tuner
•
Infrared remote control
•
Trilingual on screen TV setup display available in
English, Spanish or French
•
181 channel capability PLL frequency synthesizer
tuner with direct station call
(A converter may be
necessary to view scrambled cable channels.)
•
Closed Caption Decoder–You may view specially
labeled (cc) TV programs, movies, news, etc. with
either a dialogue caption or text display added to
the program.
•
Auto power off system–If there is no air signal input
from the antenna terminal and no operation for 15
minutes, the unit will turn itself off automatically.
•
Sleep timer–Allows you to have the unit automati-
cally turn off at a desired time.
•
V-CHIP–Enables parents to prevent their children
from watching inappropriate material on TV.
FEATURES
TV Mode
DVD Mode
•
Dolby Digital sound
This unit can handle Dolby Digital Multi-channel sur-
round sound when connected to a Dolby Digital
decoder.
•
Still/fast/slow/step playback
Various playback modes are available including
still pictures, fast forward/reverse, slow motion and
step frames.
•
Random playback for Audio CD and MP3
This unit can shuffle the order of tracks to play
them in random order.
•
Program playback for Audio CD and MP3
You can program the order of tracks to play them
in any desired order.
•
DVD menus in a desired language
You can display DVD menus in a desired language,
if available on a DVD.
•
Screen saver
If the screen saver program is set to ON, it starts
when there is no input from the unit for 5 minutes
in stop mode.
•
Subtitles in a desired language
You can select a desired language for the display
subtitles, if that language is available on a disc.
•
Selecting a camera angle
You can select the desired camera angle, if a disc
contains sequences recorded from different angles.
•
Choices for audio language and sound mode
You can select the desired audio language and
sound mode, if different languages and modes are
available on a disc.
•
Parental lock
You can set the control level to limit playback of
discs which may not be suitable for children.
•
Automatic detection of discs
This unit automatically detects if the loaded disc is
DVD, Audio CD or
CD-RW/-R with MP3 files
.
•
On-screen display
Information about the current operation can be dis-
played on a TV screen, allowing you to confirm the
currently active functions (such as program play-
back), on the TV screen using the remote control.
•
Search
Chapter search / Title search / Track search / Time
search
•
Repeat
Chapter / Title / Track / Group / All / A-B
•
Zoom
Allows you to enlarge video image.
•
Marker
The part designated by user can be called back.
•
Resume Play
User can resume to playback from the part at
which the play was stopped.
•
Virtual Surround
•
Bit rate indication
•
DRC (Dynamic range control)
You can control the range of sound volume.
- 7 - EN- 7 - EN- 7 - EN- 7 - EN- 7 - EN- 7 - EN
- REMOTE CONTROL
OPERATING CONTROLS AND FUNCTIONS
NOTE
•
When you select DVD mode, press [PLAY
OO
] or [EJECT A] first or insert a disc into the disc slot.
Otherwise, the DVD features are not operated.
1.
POWER button
(P.11, P.18)
Press to turn the power on and off.
2.PICTURE button
(P.13)
Press to adjust the picture.
3.
Number buttons
(P.11, P.21)
Press to select a desired channel number directly.
+100 button (For TV mode)
Press to select channels higher than 99.
+10 button (For DVD mode)
Press to enter desired numbers higher than 9.
4.
SLEEP button
(P.13)
Press to set the Sleep Timer.
5.
SKIP H / G buttons
(P.21)
Press once to skip chapters
/
tracks to a desired point.
6.PLAY O button
(P.18)
Press to playback the disc.
7.
PAUSE F button
(P.19)
Press to pause the current disc operation.
8.
DISPLAY button
For
TV mode
(P.14):
Press to display the current channel number on
the TV screen.
For
DVD mode
(P.27):
P
ress to display the current status on the TV screen.
9.SETUP button
(P.12, P.28)
Press to enter or exit the setup menu of TV/DVD.
10.
TITLE button
(P.19)
Press to display the title menu.
11.
CLEAR button
(P.21)
Press to clear/cancel a setting currently entered.
Press to clear “DISC INSIDE” display.
12.
MODE button
(P.24)
Press to call up the program/random screen in
stop mode.
Press to call up the Black Level Setting/Virtual
Surround screen during playback.
13.
SEARCH MODE button
(P.21)
Press to locate a desired point.
14.
AUDIO button
For TV mode (P.14): Press to select TV sound
mode (STEREO/SAP/MONO).
For DVD mode
(P.25): Press to select a desired
audio language (if available).
15.
EJECT A button
(P.18)
Press to remove a disc from the unit.
16.
SELECT button
(P.11)
Press to select the TV mode, external input mode
or DVD mode.
17.
CH.
K
/
L
buttons
(P.11)
Press to select memorized channels.
18.
VOL.
X
/
Y
buttons
(P.11)
Press to control the volume level for the DVD and
TV.
19.
MUTE button
(P.11)
Press to mute the sound or press it again to
restore sound.
20.
ZOOM button
(P.20)
Press to enlarge the part of a DVD-reproduced
image.
21.
REV
E
button (P.20)
Press to view the DVD picture in fast/slow
reverse motion.
FWD
D
button (P.20)
Press to view in fast/slow forward motion.
22.
STOP C button
(P.18)
Press to stop operation of the disc.
23.
DISC MENU button
(P.19)
Calls up the DVD menu.
24.
ENTER button
(P.12, P.19)
Press to accept a setting.
25.
K (Up) / L (Down) / { (Left) / B (Right) buttons
(P.12, P.19)
Press to select or adjust menu items.
30
29
3
4
5
7
8
9
11
12
14
13
10
6
28
27
26
23
19
18
17
15
16
20
21
22
24
25
1
2
REV
SLOW
PLAY
STOP
FWD
ENTER
PAUSE
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SKIP
SELECT
POWER PICTURE
EJECT
CH.
VOL.
MUTEZOOM
SLEEP
123
456
789
0 +10
+100
[Fig. 1]
EN - 8 -
NOTE
•
We do not recommend the use of universal remote controls. Not all of the functions may be controlled
with a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given
may not operate this unit. In this case, please call the manufacturer of the universal remote control.
INSTALLING THE BATTERIES
1 Open the battery compartment cover by
pressing the cover on the remote control unit
in the direction of the arrow.
2 Insert 2 “AA” penlight batteries into the bat-
tery compartment in the direction indicated by
the polarity (+/-) markings.
3 Replace the cover.
BATTERY PRECAUTIONS
•
Be sure to follow the correct polarity as indicated
in the battery compartment. Reversed batteries
may cause damage to the device.
•
Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
•
If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
•
Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture.
31. MENU button
Press to enter or exit the setup menu of TV/DVD.
32.
STOP C button
(P.18)
Press to stop operation of the disc.
33.
PLAY B button
(P.18)
Press to playback of the disc.
34.
EJECT
A
button
(P.18)
Press to remove a disc from the unit.
35. VOLUME
Y
/
X
buttons
(P.11)
Press to control the volume level for the DVD and
TV.
36.
CHANNEL
L
/
K
buttons
(P.11)
Press to select memorized channels.
37.
SELECT button
(P.11)
Press to select to TV mode, external input mode
or DVD mode.
38.
POWER button
(P.11, P.18)
Press to turn the power on and off.
39. Remote sensor window
- CONTROL PANEL
DVD
31 37 38
39
33
32 34 35 36
[Fig. 2]
26. RETURN button
(P.22)
Press to return to the previous screen in the setup
menu.
27.
A-B button
(P.23)
Press to repeat the playback of a selected section.
28.
ANGLE button
(P.26)
Press to change the camera angle to see the
sequence being played back from a different angle
(if available).
29. REPEAT button
(P.23)
Repeats playback of the current disc, title,
chapter, group or track.
30.
SUBTITLE button
(P.25)
Press to select a desired subtitle language.
IF YOU HAVE A JACK ON THE WALL
Connect the TV to the wall-mounted antenna jack
with an RF cable (commercially available).
IF YOU HAVE A WIRED CABLE
Connect the TV to the wired antenna cable.
•
Before plugging the antenna into the ANT jack of the
unit, check that the pin is not bent. If it is bent,
straighten the pin as illustrated, then plug the pin into
the ANT jack of the unit.
•
Cables used here are commercially available.
•
For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT jack
before moving the unit.
- 9 - EN
NOTE
PREPARATION FOR USE
ANTENNA/CABLE CONNECTION
- ANTENNA/CABLE CONNECTION
DIGITAL
AUDIO OUT
(COAXIAL)
R
L
Y
P
b
P
r
R
L
V
ID
E
O
S
-
V
I
D
E
O
V
I
D
E
O
2
C
P
M
P
O
N
E
N
T
A
U
D
I
O
A
U
D
I
O
V
I
D
E
O
1
A
N
T
H
E
A
D
P
H
O
N
E
RF Cable
[Rear of this unit]
from Cable TV signal
or Antenna
ANT
D
I
G
I
T
A
L
A
U
D
I
O
O
U
T
(
C
O
A
X
I
A
L
)
R
L
Y
Pb
Pr
R
L
V
I
D
E
O
S-VIDEO
V
I
D
E
O
2
C
P
M
P
O
N
E
N
T
A
U
D
I
O
A
U
D
I
O
V
I
D
E
O
1
A
N
T
H
E
A
D
P
H
O
N
E
A
N
T
OUT IN
75-ohm
Coaxial Cable
Cable Box
or Satellite Box
from Cable Company
or Satellite dish
[Rear of this unit]
Note to CATV system installer:
•
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
Bent pin
Cable
Plug
(Needs to be
straightened)
(Straight pin)
WHEN USING CABLE BOX/SATELLITE
BOX
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown above.
Channel selection must be made with the converter
box or satellite box. This means that channels cannot
be changed using the remote control of this unit.
- CABLE/SATELLITE BOX CONNECTION
NOTE
NOTE
EN - 10 -
You can connect this unit to your own Audio/Video
equipment.
•
Be sure to turn off the power to all components in
the system before connecting another component.
•
Refer to the Owner’s Manuals for the equipment
to be connected to the unit.
D
IG
ITA
L
A
U
D
IO
O
U
T
(C
O
A
XIAL)
R
L
Y
P
b
P
r
R
L
V
I
D
E
O
S-VIDEO
V
I
D
E
O
2
C
P
M
P
O
N
E
N
T
A
U
D
I
O
A
U
D
I
O
V
I
D
E
O
1
A
N
T
H
E
A
D
P
H
O
N
E
AUDIO
VIDEO2
VIDEO1
•
The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD or DAT deck.
•
If connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “BITSTREAM” for audio output in the setup mode. (Refer to page 29.)
•
Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “PCM” for audio output in the setup mode. Playing
a unit using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to page 29.)
•
If your own equipment is monaural (has only one Audio jack), connect the Audio cable to AUDIO L jack of this unit.
•
If you connect Video jack and S-VIDEO jack simultaneously, the S-VIDEO jack is given priority over the VIDEO jack.
- AUDIO OUTPUT
- VIDEO2 INPUT
- VIDEO1 INPUT
EXTERNAL CONNECTION
Audio Cable
Video Cassette
Recorder
ex.
(OUT)
(OUT)
(OUT)
S-Video Cable
Video Cable
OR
R
L
S
-V
ID
E
O
V
ID
E
O
V
ID
E
O
1
A
U
D
IO
NOTE
L
Y
Pb
Pr
R
COMPONENT
V
ID
E
O
2
A
U
D
IO
Component
Video Cable
Audio Cable
Video Game
Video Camera
ex.
(OUT)
(OUT)
Use this connection if your own A/V equipment (e.g.
VCR) has Video output and Audio out jacks. When
using S-Video cable, better picture is available.
Use this connection if your own A/V equipment (e.g.
video camera, video game) has Component Video
output (Y, Pb, Pr) jacks. You can enjoy the best pic-
ture with this connection.
D
IG
IT
A
L
A
U
D
IO
O
U
T
(C
O
A
X
IA
L
)
Home Audio System
Dolby Digital decoder
To coaxial digital
audio input jack
You can enjoy DVD sound with more
presence by connecting digital audio
equipment such as Dolby Digital decoder.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
When you use the external input, select “VIDEO1” or
“VIDEO2” by pressing [SELECT]. (Refer to page 11.)
•
To use the VIDEO1 input jacks, select “VIDEO1”.
•
To use the VIDEO2 input jacks, select “VIDEO2”.
NOTE
NOTE
- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN
TV OPERATION AND SETTINGS
TV SECTION
TV SECTION
TV OPERATION AND SETTINGS
VOLUME 20
C C C C C C C C C C C C C C C C
- HELPFUL HINTS -
1. PLEASE CHECK TO SEE IF THE
ANTENNA/CABLE/SATELLITE IS
PROPERLY CONNECTED.
2. DID YOU PERFORM “AUTO PRESET CH” ?
3. PLEASE REFER TO FRONT PAGE OF THE
OWNER’S MANUAL OR REAR PANEL FOR
SUPPORT LINE INFORMATION.
NOTE
When you turn on the power for the first time,
the SELECT LANGUAGE screen is displayed.
Select the language for screen display and perform
auto programming of the channels.
1 After antenna or cable connection is
completed, connect the power cord
into a standard AC outlet.
• If any digits are displayed in the corner of the
screen, press [POWER] without unplugging
the power cord.
2 Press [POWER] to turn on the unit.
3 Press one of the keys listed
below to select the desired
language of on-screen menu.
•
ENGLISH: [CH.
K
]
•
ESPAÑOL: [CH.
L
]
•
FRANÇAIS: [VOL.
X
]
4 Confirm the antenna (or cable)
connection and press [CH.
K
].
•
The tuner scans and memorizes
all active channels in your area.
5 When the scanning is
completed, the tuner stops
on the lowest memorized
channel.
•
If [MENU] is pressed during channel scanning,
the tuner stops scanning and the lowest memo-
rized channel is displayed.
•
The INITIAL SETUP menu is displayed
every time you turn on the unit unless the
scanning is completed.
•
In case no channel can be
received by the channel scan-
ning, “NO TV SIGNALS” is
displayed on the screen. Turn
off the unit and check the
antenna connection, then
follow steps 1 to 5 again.
•
You can change the setting after completing
INITIAL SET UP by LANGUAGE menu or
CHANNEL SET UP menu. (Refer to
“MENU LANGUAGE” on page 16 or
“CHANNEL SET UP” on page 12).
1 Press[POWER] to turn on the unit.
•
If the TV screen shows snow
noise and there is no operation
for more than 5 seconds,
“HELPFUL HINTS” appears.
Follow the instructions listed on-screen.
•
If those settings do not work properly, please call our
help line on the front page of this owner's manual.
2 Press [CH. K / L] or the Number buttons to
select the desired channel number.
For channel number selection with number buttons
:
•
To select single-digit channel number, press
[0]
first. (e.g. Press [0] [2] for channel 2.)
•
To select cable channels which are higher
than 99, press [+100/+10] first.
(e.g. Press [+100/+10] [2] [5] for channel 125.)
3 Press [VOL.
XX
/
YY
] to select the desired vol-
ume level.
•
Press [MUTE] to instantly mute the sound.
Press it again to restore the previous volume level.
•
If you press [CH. K / L] in the DVD mode,
you can change the TV channels. Even if you
turn off the unit in the DVD mode, when you
turn it on again, it will go into the TV mode.
TO WATCH CABLE OR SATELLITE
CHANNEL
If the unit is connected to a cable box or satellite
box, press [CH. K / L] to select CH3 or CH4
according to the output channel setting of the device
and select desired channel on that device.
TO WATCH EXTERNAL INPUT
When an external equipment is connected to
AUDIO/VIDEO input jacks on the right side, press
[SELECT] or [CH. K / L] repeatedly until
“VIDEO1” or “VIDEO2” appears on the screen.
WATCHING A TV PROGRAM
CH.
POWER
123
456
789
0 +10
+100
VOL.
NOTE
NOTE
OR
CH 15
(Example)
TV
TV
NO TV SIGNALS
INITIAL SET UP
SELECT LANGUAGE
ENGLISH NEXT:PRESS CH
K
ESPAÑOL DESPUÉS:PRESIONE CH
L
FRANÇAIS APRÈS:PRESSEZ VOL
X
– INITIAL SETUP –
PLEASE CONNECT ANTENNA OR CABLE
OR SATELLITE TO THIS UNIT.
THEN PRESS CH
K
,
IN ORDER TO PERFORM
“AUTO PRESET CH ”.
NOTE
NOTE
POWER
EN - 12 -
AUTO CHANNEL PROGRAMMING
As the initial setting, this unit has memorized all
channels, including the ones not available in your
area. This feature automatically puts only available
channels into the memory.
1 Press [SETUP] then press [
K
] or [
L
] to point
to “CHANNEL SET UP”.
2 Press [ENTER] then press [
K
] or [
L
] to point
to “AUTO PRESET CH”.
3 Press [ENTER].
•
The tuner scans and memorizes all the active
channels in your area.
•
The tuner stops on the lowest memorized channel.
•
When “AUTO PRESET CH” is activated
where there is no TV signal input, “NO TV
SIGNAL” will appear on the display after the
completion of channel scanning.
•
The unit may recognize CATV channels to be
TV channels if reception condition is poor. In
this case, check the antenna connection and
try “AUTO PRESET CH” again when recep-
tion conditions are better.
•
Auto channel programming is NOT neces-
sary when connected to a cable box or
satellite box. Just select the channel for
cable box or satellite input (ex. CH3 or
CH4) on the unit, then select your desired
channel on the cable box or satellite box.
ADDING/DELETING CHANNELS
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
1 Press [SETUP] then press [
K
] or [
L
] to point
to “CHANNEL SET UP”.
2 Press [ENTER] then press [
K
] or [
L
] to point
to “ADD/DELETE CH”.
3 Press [ENTER] then press the Number but-
tons or [CH.
KK
/
LL
] to select the desired
channel number.
4 Press [ENTER] then the channel number
turned to red. The channel is deleted from
memory. If the channel number turned to
blue, the channel is added into memory.
•
To delete another channel, repeat steps 3 to 4.
•
If you press [ENTER] again, the channel is
memorized again.
5 Press [SETUP] to exit the menu.
•
To confirm that channel(s) has(have) been
deleted or added, press [CH. K / L].
– CHANNEL SET UP –
B ADD / DELETE CH (CATV)
AUTO PRESET CH
- TV SET UP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
SETUP
ENTER
ENTER
123
456
789
0 +10
+100
ENTER
SETUP
SETUP
- TV SET UP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
ENTER
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
B AUTO PRESET CH
ENTER
CHANNEL SET UP
NOTE
Added channel : Light blue
Deleted channel : Light red
NOTE
15
ADD/DELETE
•
Shaded buttons are used for following operation.
The unit’s picture controls, brightness, contrast,
color, tint and sharpness, are preset to factory specifi-
cations. Although they are usually the best, you may
need to make some further adjustments for a more
natural looking image.
1
Press [PICTURE] then press [K] or [L] to select
the desired control “BRIGHTNESS”, “CONTRAST”,
“COLOR”, “TINT” or “SHARPNESS”.
2 Press
[
s] or [B
]
to adjust to your desired
level within 5 seconds.
•
Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
•
The picture control display will disappear automati-
cally after 10 seconds unless you press any buttons.
1 Press [SETUP] then press [
K
] or [
L
] to point
to “BACK LIGHT”.
2 Press [ENTER] then press [
s
] or [
B
] to
select to “BRIGHT”, “NORMAL” or “DARK”.
3Press [SETUP].
The Sleep Timer function turns off the unit without
using [POWER] after a desired period of time.
1 Press [SLEEP].
2 Press [SLEEP] repeatedly until the desired
sleep time is displayed.
•
Each press increases the time by 10 minutes up
to 90 minutes.
•
After 5 seconds, the Sleep Timer setting will
disappear automatically.
•
If you select “SLEEP 0 MINUTE”, Sleep Timer
setting is canceled.
- 13 - EN- 13 - EN
PICTURE CONTROL
BRIGHTNESS
-+
PICTURE
SLEEP TIMER
SLEEP
REV
SLOW
PLAY
STOP
FWD
ENTER
PAUSE
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SKIP
VOL.
MUTEZOOM
SLEEP
789
0 +10
+100
SELECT
POWER PICTURE
EJECT
3
BACK LIGHT SETTING
BRIGHTNESS to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
SETUP
- TV SET UP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B BACK LIGHT [BRIGHT]
ENTER
SETUP
SLEEP 0 MINUTE
SLEEP
TV SECTION
TV OPERATION AND SETTINGS
NOTE
EN - 14 -
You can view specially labeled (cc) TV programs,
movies, news and pre-recorded tapes with either a
dialogue caption or text display.
CAPTION mode: You can watch dramas, movies and
news while captioning the dialogues and the contents
of news.
TEXT mode: You can watch half screen text informa-
tion if you want.
1-2: You may get these captions or text information
by selecting either “1” or “2”. “2” is usually used for
a second language if available.
•
Not all programs are broadcast with closed cap-
tions. Your unit is designed to provide error-free
closed captions from high quality antenna, cable
and VCR signals. Conversely, poor quality sig-
nals are likely to result in caption errors or no
captions at all. Common signal conditions which
may cause caption errors are listed below:
–
Automobile ignition noise
–
Electric motor brush noise
–
Weak snowy reception on TV screen
–
Multiplex signal reception displaying picture
ghosts or airplane flutter
•
If the unit displays a black box on the TV
screen, this means that the unit is set to the
TEXT mode. To clear screen, select
“CAPTION1”, “CAPTION2” or “OFF”.
1 Press [SETUP] then press [K] or [L] to point
to “CAPTION”.
2 Press [ENTER] repeatedly to select the
desired caption menu “CAPTION1”,
“CAPTION2”, “TEXT1” or “TEXT2”.
•
If you select “OFF”, Closed Caption System set-
ting is canceled.
3 Press [SETUP] to exit the menu.
•
Even if there is a power failure of any
kind, the unit will retain its memory for
this feature.
TO SELECT TV SOUND MODE
1 Press [AUDIO] repeatedly to select the MTS
output mode.
•
The output mode changes as described below
every time you press [AUDIO].
* Second Audio Program (SAP):
Sometimes broadcasters add another channel of
audio to the programs they air. This is usually a
secondary language or perhaps a radio station.
•
After 5 seconds, the current audio status will
disappear from the TV screen.
•
The initial setting is “STEREO”.
•
This setting is saved even if the unit is turned
off or the AC cord is unplugged.
TO CHECK THE SOUND STATUS
By pressing [DISPLAY], the status shown below
will appear on the display when you receive a broad-
cast on the unit tuner channel you are watching.
1) When a program is broadcast in stereo,
“STEREO” appears on the TV screen.
2) When a program is broadcast in second audio,
“SAP” appears on the TV screen.
3) When a program broadcast both in stereo and sec-
ond audio, “STEREO/SAP” appears on the TV
screen.
CLOSED CAPTION SYSTEM
- TV SET UP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [OFF]
BACK LIGHT [BRIGHT]
- TV SET UP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [CAPTION1]
BACK LIGHT [BRIGHT]
SETUP
ENTER
SETUP
MTS (Multi-Channel Television
Sound) System
AUDIO
NOTE
NOTE
STEREO
SAP*
MONO
NOTE
STEREO
CH 123
STEREO/SAP
3)
1)
2)
- 15 - EN- 15 - EN- 15 - EN- 15 - EN- 15 - EN
•
Shaded buttons are used for following operation.
V-CHIP SET UP
This feature enables parents to prevent their children
from watching inappropriate material on TV. When
you try to access a program which is blocked, “PRO-
TECTED PROGRAM by ...” message appears on
the TV screen.
1 Press [SETUP] then press [
K
] or [
L
] to point
to “V-CHIP SET UP”.
2 Press [ENTER] then press the Number
Buttons to enter the access code.
•
For the first time set-up or in the event the unit
has lost power, enter the default code of 0000.
3 Press [K] or [L] to select “TV RATING”,
“MPAA RATING” or “CHANGE CODE” then
press [ENTER].
TV RATING: See
TV RATING SET UP
MPAA RATING: See
MPAA RATING SET UP
CHANGE CODE: See
CHANGE ACCESS CODE
TV RATING SET UP
Follow steps
1
to
3
in the V-CHIP SET UP.
4 Press [K] or [L] to select the desired TV rat-
ing to be blocked then press [ENTER] repeat-
edly to set “BLOCK” or “VIEW”.
•
When you select a rating and set it to
“BLOCK”, the higher ratings will be blocked
automatically. The lower ratings will be avail-
able for viewing.
•
When you set the lowest rating to “VIEW”, all
other ratings will automatically be available
for viewing.
5 When you select the ratings of TV-Y7, TV-PG,
TV-14 or TV-MA you will have the option of
setting sub rating categories.
Press [K] or [L] to select a rating with sub-
ratings you wish to block, then press
[ENTER] twice.
Press [K] or [L] to select a sub-rating, then
press [ENTER] to set it to “BLOCK” or “VIEW”.
•
The blocked sub-ratings will appear next to
the rating category in the “TV RATING”
menu.
- 15 - EN
– V-CHIP SET UP –
B TV RATING
MPAA RATING
CHANGE CODE
A
B
C
ENTER
ENTER
B TV–Y [VIEW]
TV–Y7 ( ) [VIEW]
TV–G [VIEW]
TV–PG ( ) [VIEW]
TV–14 ( ) [VIEW]
TV–MA ( ) [VIEW]
Selection Rating Category Explanations
TV-Y Appropriate for all children
TV-Y7 Appropriate for children seven and older
TV-G General Audience
TV-PG Parental Guidance suggested.
TV-14 Unsuitable for children under 14
TV-MA Mature audience only
TV–Y [VIEW]
TV–Y7 ( ) [VIEW]
B TV–G [BLOCK]
TV–PG (DLSV ) [BLOCK]
TV–14 (DLSV ) [BLOCK]
TV–MA ( LSV ) [BLOCK]
Selection Rating Category Explanations
TV-Y7
FV Fantasy Violence
TV-PG, TV-14, TV-MA
D Suggestive Dialog
(TV-PG, TV-14 only)
L Coarse Language
SSexual Situation
VViolence
A
- 15 - EN
V-CHIP SET UP
REV
SLOW
PLAY
STOP
FWD
ENTER
PAUSE
DISC
MENU
RETURNTITLESETUP
DISPLAY
SKIP
CH.
VOL.
MUTEZOOM
SLEEP
123
456
789
0 +10
+100
SETUP
- TV SET UP -
CHANNEL SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
ENTER
ACCESS CODE
_ _ _ _
123
456
789
0
NOTE
NOTE
TV SECTION
TV OPERATION AND SETTINGS
EN - 16 -
6 Press [SETUP] to exit the menu.
•
To change the rating, the TV must be turned
to an unprotected program. If “PROTECTED
PROGRAM by ...” appears on the screen,
please change the channel to a station that is
not protected.
MPAA RATING SET UP
Follow steps
1
to
3
in the V-CHIP SET UP on page
15.
4 Press [K] or [L] to point to your desired item,
then press [ENTER] to select “BLOCK” or
“VIEW”.
•
When you select a rating and set it to “BLOCK”,
the higher ratings will be blocked automatically.
The lower ratings will be available for viewing.
•
When you set the lowest rating to “VIEW”, all other
ratings will automatically be available for viewing.
5 Press [SETUP] to exit the menu.
CHANGE ACCESS CODE
Follow steps
1
to
3
in the V-CHIP SET UP on page
15.
4 Press the Number buttons to enter your
desired access code in the “NEW CODE”
space, then enter the same code in the
“CONFIRM CODE” space. When completed,
the menu will return to “V-CHIP SET UP”.
•
Make sure you enter exactly the same new code
in the “CONFIRM CODE” space as one in the
“NEW CODE” space. If they are different, the
“NEW CODE” space is cleared for redoing.
5 Press [SETUP] to exit the menu.
•
Your personal access code will be erased and
will return to the default (0000) when a power
failure occurs or when you turn off the power
using a wall switch. If you have forgotten the
code, unplug the power cord for 10 seconds
to restore the access code to 0000.
1 Press [SETUP] then press [K] or [L] to point
to “LANGUAGE”.
2 Press [ENTER] repeatedly to select
“ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French.
3 Press [SETUP] to exit the menu.
•
This function effects only the language on the
screen menu and not the audio source.
•
If for some reason the menu is in Spanish or
French, press [SETUP], press [K] or [L] to
point to “IDIOMA [ESPAÑOL]” or
“LANGAGE [FRANÇAIS]”, then press
[ENTER] repeatedly to select desired
language, then press [SETUP].
B
G[VIEW]
PG [VIEW]
PG–13 [VIEW]
B R[BLOCK]
NC–17 [BLOCK]
X[BLOCK]
SETUP
NOTE
Selection Rating Category Explanations
G General Audience
PG Parental Guidance suggested
PG-13 Unsuitable for children under 13
R Restricted; under 17 requires accompa-
nying parent or adult guardian
NC-17 No one under 17 admitted
X Mature audience only
SETUP
C
NEW CODE
X X X X
CONFIRM CODE
_ _ _ _
- TV SET UP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
123
456
789
0
SETUP
SETUP
ENTER
SETUP
NOTE
MENU LANGUAGE
NOTE
ENTER
–
17
–
EN
•
NEVER play back the following discs. Otherwise, the unit may result in malfunction.
DVD-RAM / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL /
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers
•
Never insert a disc which is broken or whose form is abnormal (other than 5 inch (12cm) round disc).
•
On the following disc, the sound MAY NOT be heard.
Super Audio CD
Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
•
Any other discs without compatibility indications
UNPLAYABLE DISCS
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1:
This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2:
Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*7:
You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However, depend-
ing on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,
etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be
played back at all or normally (the picture or sound may not be smooth, etc.).
*9:
If there is too much recording space left on a disc (the used portion is less than 2-
3
/
16
" (55mm) across), it may not play back properly.
*10:
Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it correctly.
*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region for-
mat can only be played back on unit with the same region code.
PLAYABLE DISCS
is a trademark of DVD Format/Logo Licensing Corporation.
ABOUT THE DISCS
DVD SECTION
NOTE
MP3
Audio CD
Example
Group 1 Group 2
Tra ck 1 Track 2Track 5Track 6Tra ck 3 Track 4
Example
Tra ck 1 Track 2Track 5Track 6Tra c k 3 Track 4
MP3
Digital audio
or
Example
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 1 Chapter 2Chapter 3 Chapter 4
Digital video
(MPEG2)
Digital audio
5 inches
(12cm)
5 inches
(12cm)
DVD-Video
* 1,2,4,6,10,11
or
* 1,3,4,5,
6,7,9,10
DVD-RW
DVD-R
* 1,3,4,5,
6,8,9,10
DVD+RW
DVD+R
* 4,6,10
Audio CD
* 4,5,6,9,10
CD-RW
CD-R
Region code
Mark (logo)
Playable
discs
Recorded
signals
Disc size Disc type
DVD SECTION
ABOUT THE DISCS
–
18
–
EN
•
Shaded buttons are used for following operation.
GETTING STARTED
Turn on the power of amplifier and any other compo-
nents, if necessary.
1 Press [POWER] then the power will turn on.
2 Open the disc door manually.
3 Insert a disc with the label facing back of the
unit to start playing it. By simply placing the
disc gently into the slot, it will be loaded auto-
matically, then close the disc door manually.
•
Playback will start from the first chapter/track of the disc.
•
If the playback does not start automatically,
press [PLAY O].
•
When you playback a DVD which features a
title menu, it may appear on the screen. In this
case, refer to “TITLE MENU” on page 19.
4 Press [STOP C] to stop playback.
5
Press [EJECT A] to remove the disc from the unit.
•
When the DVD mode has been switched to the
TV mode, the DVD mode shuts down first and
then the TV picture and sound appears in about
4 seconds. Similarly, when [POWER] is
pressed to turn off in the DVD mode, this mode
shuts down first and then the unit is turned off.
•
“”may appear at the top-right on the TV
screen during operation, warning that a pro-
hibited operation has been encountered by the
DVD or the disc.
•
With DVDs that use titles for playback pro-
gram signals, playback may start from the
second title or it may skip these titles.
•
During the playback of a two layered disc,
pictures may stop for a moment. This happens
when the 1st layer switches to the 2nd layer.
This is not a malfunction.
•
If the disc doesn’t come out at step 5, press
and hold [EJECT
AA
] on the unit to remove
the disc from the unit.
MP3 PLAYBACK
1 In stop mode, press [DISC MENU], then press
[
KK
] or [
LL
] to select the desired group or track.
•
If a group is selected, press [B] or [ENTER] to go
on to the track selection screen. Press [s] to go
back to previous screen.(except for the top page.)
•
If a track is selected, press [ENTER] to start
playing tracks. Starting from the one you’ve just
chosen the subsequent tracks will be played.
•
If the entire file list cannot be displayed at once
on a screen, “n” appears to go to the next page.
•
Press [TITLE] to return to the top file of the
highest hierarchy in the program and file list.
2 Press [STOP
CC
] to stop playback.
•
Folders are known as Groups; files are known as Tracks.
•
MP3 files are accompanied by icon.
•
Maximum of 255 folders can be recognized.
•
Maximum of 999 files can be recognized.
•
Up to 8 hierarchies can be created.
This unit recommends the use of files recorded
at the below specifications:
•
Sampling frequency: 44.1kHz or 48kHz
•
Constant bit rate: 32kbps ~ 320kbps
•
For MP3 file recorded in Variable Bit Rate (VBR),
the unit may not display the actual elapsed time.
3
PLAYING A DISC
BASIC PLAYBACK
REV
SLOW
PLAY
STOP
FWD
ENTER
PAUSE
DISC
MENU
RETURNTITLESETUP
DISPLAY
SKIP
MUTEZOOM
SELECT
POWER PICTURE
EJECT
3
POWER
STOP
EJECT
NOTE
folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3
folder name 1
DISC
MENU
STOP
NOTE
–
19
–
EN
1 Press [DISC MENU].
•
The DVD main menu will appear.
•
If the feature is not available, symbol may
appear on the TV screen.
•
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
2 Press [K], [L], [s] or [B] to select an item
and press [ENTER] to confirm selection.
1 Press [TITLE].
•
The title menu will appear.
•
If the feature is not available, symbol may
appear on the TV screen.
2 Press [K], [L], [s] or [B] to select an item
then press [ENTER] to confirm selection.
CALLING UP A MENU SCREEN
DURING PLAYBACK
Press [DISC MENU] to call up the DVD menu or
press [TITLE] to call up the title menu.
•
Contents of menu and corresponding menu
operations may vary between discs. Refer to
the manual accompanying the disc for details.
1 During playback, press [STOP C].
•
Resume message will appear on the TV screen.
2 Press [PLAY O], playback will resume from
the point at which playback was stopped.
•
To cancel resume, press [STOP C] twice.
•
For MP3, playback will resume from the begin-
ning of the current track.
•
The resume information stays on even when the
power is turned off.
1 During playback, press [PAUSE F].
•
Playback will pause and sound will be muted.
2 To continue playback, press [PLAY O].
1 During playback, press [PAUSE F].
•
Playback will pause and sound will be muted.
2 The disc goes forward by one frame each
time [PAUSE F] is pressed.
3
To exit step by step playback, press [PLAY O].
RESUME
PAUSE
TITLE MENU
DISC MENU
DISC
MENU
ENTER
TITLE
ENTER
STOP
PLAY
PLAY
PAUSE
STEP BY STEP PLAYBACK
PAUSE
PAUSE
PLAY
NOTE
Press ’PLAY’ to play from here.
To play the beginning,
press ’STOP’ first and then ’PLAY’.
Resume ON
DVD SECTION
PLAYING A DISC
–
20
–
EN
1 During playback, press [FWD g] or
[REV h].
•
“ g 1” or “h 1” appears on the screen.
2 To select another speed, repeat step 1 until
your required speed number appears on the
screen.
•
For DVDs, fast forward/reverse search speed is
different depending on the disc. Approximate
speed is 1(×2), 2(×8), 3(×20), 4(×50) and
5(×100).
•
For Audio CDs and
CD-RW/-R with MP3 files,
approximate speed is 1(×2), 2(×8) and 3(×30).
3
To return to normal playback, press [PLAY O]
.
1 During playback, press [PAUSE F].
2 Press [FWD g] or [REV h ].
•
“1”or “1”appears on the screen.
3 To select another speed, repeat step 2 until
your required speed number appears on the
screen.
•
Slow forward or reverse speed varies with the
disc. Approximate speed is 1(1/16), 2(1/8) and
3(1/2).
4
To return to normal playback, press [PLAY O].
The Zoom function allows you to enlarge the video
image and to pan through the enlarged image.
1 Press [ZOOM] during playback.
•
Playback will continue.
2 Press [ZOOM] repeatedly to select the
required zoom factor: ZOOM1, ZOOM2,
ZOOM3 or OFF.
3 Press [K], [L], [s] or [B] to move the
zoomed picture across the screen.
4 To exit zoom mode, press [ZOOM] to OFF.
•
Zooming function does not work while disc
menu is shown.
•
Zooming function is not available on some
discs.
•
It may take several seconds to slide the
zoomed picture.
•
The picture may be distorted if you operate
other functions repeatedly (ex. [PAUSE
FF
] or
[REV
h
], etc.) in the zoom mode.
FAST FORWARD /
FAST REVERSE
SLOW FORWARD /
SLOW REVERSE
ZOOM
REV
SLOW
FWD
PLAY
PAUSE
REV
SLOW
FWD
PLAY
ZOOM
ZOOM
ZOOM
NOTE
–
21
–
EN
•
Shaded buttons are used for following operation.
There are three ways to begin playback on an Audio CD and
CD-RW/-R with MP3 files
at a specific track.
Using the Number buttons
1 Press the Number buttons to enter the
desired track number.
•
Playback will start at the selected track.
•
To select single-digit track number, press single
number. (e.g. Press [3] for track number 3.)
•
To select track numbers which are higher than 9,
press [+100/+10] first.
(e.g. Press [+100/+10] [2] [5] for track number
25.)
Using [SEARCH MODE]
1 Press [SEARCH MODE].
•
The track search display appears.
2 Within 30 seconds, select the desired track
number using the Number buttons.
•
To select single-digit track number, press [0]
first if the total number of track in the disc is 10
or more. (e.g. Press [0] [3] for track number 3.)
•
Playback will start at the selected track.
Using [SKIP
H
/
G
]
During playback, press [SKIP G] to move the next
track. Press it repeatedly to skip subsequent tracks.
Press [SKIP H ] to go back to beginning of the cur-
rent track. Press it repeatedly to go to the previous
tracks.
•
If [SKIP H / G ] is pressed while the play-
back is paused, the playback will be paused
again after skipping to the next track.
•
[SKIP H / G] are not operative when
playback is stopped.
1 Press [SEARCH MODE] once for the Chapter
search, twice for the Title search during play-
back.
2 Within 30 seconds, enter the desired chapter/
title number using the Number buttons.
•
Playback will start at the selected chapter or
title.
•
Press [CLEAR] to erase the incorrect input.
•
To select single-digit chapter/title number, press
[0] first if the total number of chapter/title in the
disc 10 or more. (e.g. Press [0] [2] for
chapter/title 2.)
TRACK SEARCH
TITLE / CHAPTER SEARCH
_/2
SEARCH FUNCTION
REV
SLOW
PLAY
STOP
FWD
ENTER
PAUSE
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
DISPLAY
SKIP
CH.
VOL.
MUTEZOOM
SLEEP
123
456
789
0 +10
+100
123
456
789
0 +10
+100
SEARCH MODE
123
456
789
0
SEARCH MODE
once
123
456
789
0
NOTE
DVD SECTION
PLAYING A DISC / SEARCH FUNCTION
–
22
–
EN
1 During playback, press [SEARCH MODE]
repeatedly to display the Time Search on the
TV screen.
2 Within 30 seconds, enter a desired disc time
using the Number buttons.
•
Playback will start at the specified time.
•
Press [CLEAR] to erase the incorrect input.
•
When there is no need to enter a number, “0”
appears automatically. For example,
“0 :0
-
:
- -
” appears in the Time Search display
if the total time of the track or title is less than
10 minutes.
Use markers to memorize your favorite places on a disc.
1 Press [SEARCH MODE] repeatedly during
playback to display the Marker screen.
2 Press [s ] or [B] to select 1, 2, 3, 4, 5, 6, 7,
8, 9, or 10 and ensure that “
- - - -
:
- -
:
- -
”
appears in the display.
3 When you reach the desired point, press
[ENTER].
•
The Title or Track and elapsed playing time will
appear in the TV screen.
4 To return to the Marker later, press [SEARCH
MODE] repeatedly during playback to display
the Marker screen. Then press [s] or [B] to
choose the desired marker, then press
[ENTER].
•
Operations which erase all Markers:
– Turning off the power.
– Ejecting a disc from the unit.
– Pressing [SELECT].
–
Selecting “AC” at step 2 and pressing [ENTER].
•
To clear a marker:
– Press [s ] or [B] to select a cursor on to
the marker number and press [CLEAR].
•
You can mark up to 10 points.
5 Press [SEARCH MODE] or [RETURN] to
exit.
TIME SEARCH MARKER SET UP SCREEN
SEARCH MODE
repeatedly
123
456
789
0
SEARCH MODE
repeatedly
ENTER
SEARCH MODE
ENTER
repeatedly
SEARCH MODE
OR
RETURN
NOTE
_:_ _:_ _ 1:29:00
TOTAL
_ _ _
_:_ _:_ _
21 345678910 AC
- 23 - EN
•
Shaded buttons are used for following operation.
REPEAT is available only during playback.
For DVD-Vs
1 To activate the repeat function, press
[REPEAT] during playback.
•
The repeat mode changes as described below
every time you press the button.
•
Repeat Title/Chapter is not available with
some scenes.
•
Repeat setting will be cleared when moving
to other title or chapter.
For Audio CDs
1 To activate the repeat function, press
[REPEAT] during playback.
•
The repeat mode changes as described below
every time you press the button.
•
Repeat setting will be cleared when moving
to other track.
•
Repeat playback does not function during
A-B repeat playback.
For MP3
1 Press [REPEAT] during playback.
•
The repeat mode changes as described below
every time you press the button.
•
Repeat Track/Group setting will be cleared
when moving to other track or group.
1 Press [A-B] at your chosen starting point.
•
“ A-” appears briefly on the TV screen.
2 Press [A-B] again at your chosen end point.
•
“A-B”appears briefly on the TV screen, and
the repeat sequence begins.
3 To exit the sequence, press [A-B].
•
The A-B repeat section can only be set within
the current title (for DVDs) or current track
(for Audio CDs).
•
A-B repeat is not available with some scenes in DVD.
•
To cancel the A point which was set, press
[CLEAR].
•
A-B repeat playback does not function during
title, chapter, track or all repeat playback.
SPECIAL PLAYBACK FUNCTION
REPEAT
A-B REPEAT
CHAPTER TITLE OFF
(current chapter repeat) (current title repeat)
(repeat
off)
TRACK ALL OFF
(current track repeat) (entire disc repeat)
(repeat
off)
REV
SLOW
PLAY
STOP
FWD
ENTER
PAUSE
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
REPEAT
REPEAT
A
-
B
A
-
B
A
-
B
NOTE
NOTE
NOTE
DVD SECTION
SEARCH FUNCTION / SPECIAL PLAYBACK FUNCTION
TRACK
ALL OFF
(current track
repeat)
(entire disc
repeat)
(repeat
off)
GROUP
(current group
repeat)
NOTE
REPEAT
EN - 24 -
You may determine the order in which tracks will play.
1 In stop mode, press [MODE].
•
The “PROGRAM” screen will appear.
2 Press [▲ ] or [▼] to select a track, then press
[ENTER].
•
Press [CLEAR] to erase the most recently
entered track.
•
If the entire Program cannot be displayed at
once on a screen, “G” appears to go to the next
page and “H” appears to go back to the previ-
ous page.
While an MP3 folder is open:
•
Press [ B] when you want to go to the next
hierarchy.
•
Press [s ] when you want to go back to the
previous hierarchy.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4
Press [PLAY O] to play the programmed tracks.
•
While the program is being played back,
pressing [STOP C] works as follows.
•
Press [STOP C] once and then [PLAY O]
again, playback will restart from the point
where [STOP C] was pressed. (Program con-
tinued)
•
Press [STOP C] twice and then [PLAY O]
again, playback will restart from the track in
the usual way. (Program canceled)
•
Up to 99 tracks can be entered.
•
To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
•
If you like to repeat the current track in the
program, press [REPEAT] several times until
“ TRACK” appears during playback. If you
like to repeat the entire program press
[REPEAT] several times until “ ALL”
appears during playback.
This function shuffles the playing order of tracks
instead of playback in the sequence.
1 In stop mode, press [MODE] twice.
•
“RANDOM” screen appears.
2 Press [PLAY O] to start random playback.
•
If you like to repeat the current track in the ran-
dom selection, press [REPEAT] several times
until “ TRACK” appears during playback. If
you like to repeat the entire random selection
press [REPEAT] several times until “ ALL”
appears during playback.
PROGRAM
MODE
ENTER
TOTAL
1/4 2/3
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
1:03:30
PLAY
NOTE
RANDOM PLAYBACK
twice
MODE
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
PLAY
NOTE
<Example : CD>
<Example : CD>
- 25 - EN
•
Shaded buttons are used for following operation.
The unit allows you to select a language for subtitles
during DVD disc (if available) playback.
1 Press [SUBTITLE] during playback.
•
The subtitle language will appear on the display
bar at the top of the TV screen.
2 Press [SUBTITLE] repeatedly to select your
desired subtitle language.
3 To turn off subtitles, press [SUBTITLE]
repeatedly until “OFF” appears.
•
Pressing [SUBTITLE] may not work on
some DVDs with multiple subtitle languages.
In this case, set it on the disc menu.
(Operation varies between discs. Refer to the
manual of the disc.)
•
If the desired language is not shown after
pressing [SUBTITLE] several times, the disc
does not have subtitles in that language.
•
When “NOT AVAILABLE” appears on the TV
screen, it means no subtitle is recorded on the
scene.
•
If you choose a language that has a 3 letter
language code, the code will be displayed
every time you change the Subtitle language
setting. If you choose any other languages,
“---” will be displayed instead. (Refer to page
31.)
The unit allows you to select a language during DVD
disc
(if multi languages are available) playback.
1 Press [AUDIO] during playback.
2 Press [AUDIO] repeatedly to select your
desired language.
•
Pressing [AUDIO] may not work on some
DVDs with multiple audio languages (e.g.
DVDs which allow audio language setting on
the disc menu).
1
Press [AUDIO] repeatedly during playback to
select between “STEREO”, “L-ch” or “R-ch”.
STEREO : Both right and left channels are active
(stereo)
L-ch : Only left channel is active
R-ch : Only right channel is active
AUDIO LANGUAGE
SUBTITLE LANGUAGE
1.ENG/6
1.ENG Dolby D 3/2.1ch 48k/3
CHANGING THE SETTINGS
STEREO SOUND MODE
STEREO
ENTER
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SUBTITLE
SUBTITLE
SUBTITLE
AUDIO
AUDIO
AUDIO
NOTE
DVD SECTION
SPECIAL PLAYBACK FUNCTION / CHANGING THE SETTINGS
NOTE
NOT AVAILABLE
EN - 26 -
NOTE
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle when the “”icon appears on the
screen.
1 Press [ANGLE] during playback.
•
The selected angle will be displayed on the dis-
play bar at the top of the screen.
•
If the “ANGLE ICON” setting is “OFF” in the
“OTHERS” menu, the “”icon will not
appear. (Refer to page 30.)
2 Press [ANGLE] repeatedly to select your
desired angle.
Adjust the Black Level Settings to make the black
parts of the picture brighter.
1 Press [MODE] during playback then press
[ENTER] to switch “ON” or “OFF”.
ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
(Initial setting)
2 Press [MODE] twice or [RETURN] to exit.
•
The setting will be saved even if the unit is
turned off.
You can enjoy surround-sound effect over two speak-
ers on this unit.
1 Press [MODE] repeatedly during playback
then press [ENTER] to set it “1”, “2” or “OFF”.
1: Natural effect
2: Emphasized effect
OFF: Original Sound
2 Press [MODE] to exit.
•
You can also exit the menu by pressing
[RETURN].
For Audio CD play only:
•
Virtual Surround will not be effective if the
sound mode is set to something other than
“STEREO”. (Refer to “STEREO SOUND
MODE” on page 25.)
VIRTUAL SURROUND
OFF
BLACK LEVEL SETTING
OFF
CAMERA ANGLE
1 / 8
ANGLE
ANGLE
MODE
MODE
twice OR
RETURN
MODE
repeatedly
ENTER
MODE
NOTE
- 27 - EN
•
Shaded buttons are used for following operation.
You can check the information about the current disc
by pressing
[DISPLAY].
For DVD-Vs
1 Press [DISPLAY] during playback to show
current Chapter.
2
Press [DISPLAY] again to show current Title.
3 Press [DISPLAY] again.
4 Press [DISPLAY] again to exit.
For Audio CDs
1 Press [DISPLAY] during playback to show the
current Track.
2 Press [DISPLAY] again to show current Total
Tra ck .
3 Press [DISPLAY] again to exit.
•
When you are playing a disc in PROGRAM
or RANDOM mode, “PROGRAM” (or
“RANDOM”) will be displayed at step 2.
For MP3
1 Press [DISPLAY] during playback.
2 Press [DISPLAY] again.
3 Press [DISPLAY] again to show the
current playback mode.
(Only when you are playing a disc in PROGRAM or
RANDOM mode.)
4 Press [DISPLAY] again to exit.
NOTE
THE ON-SCREEN INFORMATION
ENTER
RETURNTITLESETUP
DISPLAY
CH(Chapter):
Current chapter number / Total chapters
11/16 0:00:00 - 0:03:30
Elapsed time of the current chapter
Remaining time of the current chapter
Current playback status
Angle icon, appears only when avail-
able on the DVD
TT(Title):
Current title number / Total titles
1/3 0:00:00 - 1:23:45
Elapsed time of the current title
Remaining time of the current title
Current repeat setting appears only
when the repeat setting is active
C: Chapter repeat / T: Title repeat /
AB:A-B repeat
TL1
BIT RATE: The amount of audio and
video data currently being read
Layer numbers, appears only when
playing a two-layered Disc
L0: Layer 0 is playing
L1: Layer 1 is playing
4/12 0:03:21 - 0:02:15
T
TR(Track):
Current track number / Total tracks
Elapsed time of the current track
Remaining time of the current track
Current playback status
4/12 0:13:45 - 0:45:40
T
Current repeat setting appears only
when the repeat setting is active
T: Track repeat
A: All Tracks repeat
AB:A-B repeat
ALL:
Current track number / Total tracks
Elapsed time of the entire disc
Remaining time of the entire disc
DVD SECTION
CHANGING THE SETTINGS / THE ON-SCREEN INFORMATION
PROGRAM
RANDOM
or
TRACK 01
3
The name of the file currently in play
will be displayed.
Current playback status
1/36 0:01:15
T
Current repeat setting, if active
T: Track repeat
G: Group (folder) repeat
A: Disc repeat
Elapsed playing time of the current
track
TR(Track):
Current track number / Total tracks
EN - 28 -
•
Shaded buttons are used for following operation.
You can change the DVD player’s settings.
1 In stop mode, press [SETUP] twice, [L] to
select “CUSTOM” then press [ENTER].
•
If the menu does not appear, press [PLAY O]
first, then press [STOP C]. Make sure the
disc is in stop mode, then slowly press
[SETUP] twice.
2 Press [K] or [L] to select the desired item
then press [ENTER] to confirm.
Refer to the pages below to set up each item.
LANGUAGE: See LANGUAGE SETTING
DISPLAY: See DISPLAY SETTING
AUDIO: See AUDIO SETTINGS
PARENTAL: See
PARENTAL CONTROL
OTHERS: See OTHER SETTINGS
LANGUAGE SETTING
Follow steps
1
to
2
in the .
3 Press [K] or [L] to select the desired item
then press [ENTER].
AUDIO: Sets the audio language.
SUBTITLE: Sets the subtitle language.
DISC MENU: Sets the language for DVD menu.
4 Press [K] or [L] to select a setting then press
[ENTER].
•
If “OTHER” is selected on the “AUDIO”,
“SUBTITLE” or “DISC MENU” screen, press
four-digit number to enter the code for the
desired language. (Refer to page 31.)
•
Only the languages supported by the disc can be selected.
5 Press [SETUP] to exit the menu.
•
Language Setting for Audio and Subtitle are
not valid for some discs due to default setting
of the disc. In this case, set them by pressing
[AUDIO] and [SUBTITLE]. (Refer to page
25.)
•
If you select a language that is not supported
by the disc, subtitle will automatically be set
OFF and the first item of the audio languages
will be automatically set.
DISPLAY SETTING
Follow steps
1
to
2
in the .
CUSTOM MENU
CUSTOM MENU
D
SUBTITLE
OFF
ENGLISH
FRENCH
SETUP LANGUAGE
DISC MENU
ENGLISH
FRENCH
SPANISH
SETUP LANGUAGE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SETUP LANGUAGE
SETUP LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ORIGINAL
OFF
ENGLISH
CHANGING THE DVD SET UP ITEMS
D
E
F
G
H
SETUP
QUICK
CUSTOM
INITIALIZE
ENTER
RETURNTITLESETUP
DISPLAY
SETUP
twice
ENTER
SETUP CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
ENTER
ENTER
ENTER
SETUP
CUSTOM MENU
NOTE
NOTE
TV SET UP MENU IN DVD MODE
•
You can access the TV SETUP menu by press-
ing [SETUP] from the DVD mode, and select
only “LANGUAGE” and “BACK LIGHT”.
QUICK MENU
•
You can select the “TV MODE” or “DOLBY
DIGITAL” from the QUICK menu quickly. To
access the QUICK menu, select “QUICK”
instead of “CUSTOM” at step
1
.
E
- 29 - EN
3 Press [K] or [L] to select the below items then
press [ENTER].
TV MODE:
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
•
4:3 LETTER BOX (default): To show black bars
on top and bottom of the screen.
•
4:3 PAN & SCAN: To show a full height picture
with both sides trimmed.
STILL MODE
:
This function allows you to adjust picture resolu-
tion and quality in the still mode.
•
AUTO (default): Automatically select the best
resolution setting (FRAME or FIELD) based on
the data characteristics of the pictures.
•
FIELD: Select “FIELD” when the pictures are
still unstable even if “AUTO” is selected.
FIELD stabilizes the pictures, although the pic-
ture quality may become coarse due to the limit-
ed amount of data.
•
FRAME: Select “FRAME” to display relatively
motionless pictures in higher resolution.
FRAME improves the picture quality, although it
may unstabilize the pictures due to simultaneous
output of two field data.
4 Press [SETUP] to exit the menu.
AUDIO SETTINGS
Choose the appropriate Audio settings for your equip-
ment as it only affects during the playback of DVD
discs.
Follow steps
1
to
2
in the on
page 28.
3 Press [K] or [L] to select the below items then
press [ENTER].
DRC (Dynamic Range Control):
•
To compress the range of soft to loud sound.
•
The default setting is “ON”.
DOWN SAMPLING:
•
ON : Output in 48 kHz. (default)
•
OFF : Output the original sound.
When playing disc with copyright protection
•
If you select “OFF”, copyright protection will be
activated and sound will be down sampled at
48kHz.
DOLBY DIGITAL:
Set to “BITSTREAM” when the unit is connected
to a Dolby Digital Decoder.
•
BITSTREAM:
Output a Dolby Digital signal (default)
•
PCM:
Convert the Dolby Digital to PCM
(2 channel stereo)
4 Press [SETUP] to exit the menu.
PARENTAL CONTROL
Parental Control limits the discs viewing that exceed
your setting (with a password or playback will stop).
This feature allows you to prevent discs with alterna-
tive scenes from being played by your children.
PARENTAL LEVEL
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc’s rat-
ings exceed the level you set.
Follow steps
1
to
2
in the on
page 28.
3 Enter your four-digit password then press
[ENTER].
•
Press [4], [7], [3], [7] then enter your password
if you forget the password.
CUSTOM MENU
QUICK
CUSTOM MENU
QUICK
G
SETUP PARENTAL
PASSWORD
Enter current password.
123
456
789
0
ENTER
TV MODE
4:3 LETTER BOX
STILL MODE
AUTO
SETUP DISPLAY
TV MODE
4:3 LETTER BOX
STILL MODE
AUTO
SETUP DISPLAY
ENTER
TV MODE
4:3 LETTER BOX
STILL MODE
AUTO
SETUP DISPLAY
SETUP
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
SETUP AUDIO
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
SETUP AUDIO
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
SETUP AUDIO
ENTER
SETUP
F
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
SETUP AUDIO
DVD SECTION
CHANGING THE DVD SET UP ITEMS
EN - 30 -
4 Press [K] or [L] to select “PARENTAL LEVEL”
then press [ENTER].
5 Press [K] or [L] to select the desired level
then press [ENTER].
6 Press [SETUP] to exit the menu.
•
When doing this for the first time, enter any 4
digits. (except for 4737) That number will be
used as the password. (in the event you forget
the password, see below)
•
To change the password, press [K] or [L] to
select “PASSWORD CHANGE” at step 4
then press [ENTER]. Enter the four-digit
password, then press [ENTER].
•
With some DVDs, it may be difficult to find if
they are compatible with parental control. Be
sure to check if the parental control function
operates in the way that you have set.
•
Record the password in case you forget it.
CONTROL LEVELS
•
ALL
All parental controls are canceled.
•
Level 8
DVD software of any grade (adult/general/children)
can be played back.
•
Levels 7 to 2
Only DVD software intended for general use and
children can be played back.
•
Level 1
Only DVD software intended for children can be
played back, with those intended for adult and gen-
eral use prohibited.
OTHER SETTINGS
Follow steps
1
to
2
in the on
page 28.
3 Press [K] or [L] to select the below items then
press [ENTER].
ANGLE ICON:
•
Press [ENTER] repeatedly to turn Angle icon
“ON” or “OFF”.
•
The default setting is “ON”.
SCREEN SAVER:
•
Press [ENTER] repeatedly to turn Screen Saver
“ON” or “OFF”.
•
The default setting is “OFF”.
•
If you select “ON”, the screen saver program
starts when there is no input from the unit for 5
minutes in stop mode.
4 Press [SETUP] to exit the menu.
This allows you to return all selections of SETUP
(except for “PARENTAL” and menu language) to
their default settings.
1 Press [SETUP] twice in stop mode so that the
“INITIALIZE” menu appears.
2 Press [K] or [L] to select “INITIALIZE” then
press [ENTER].
3 Press [K] or [L] to select “YES” then press
[ENTER] twice.
All the settings (except for “PARENTAL” and
menu language) will be cleared.
•
To cancel the initialization, select “NO”.
4 Press [SETUP] to exit the menu.
CUSTOM MENU
H
PASSWORD CHANGE
PARENTAL LEVEL ALL
SETUP PARENTAL
PARENTAL LEVEL
ALL
8 [Adult]
7 [NC-17]
6 [R]
SETUP PARENTAL
SETUP OTHERS
ANGLE ICON
SCREEN SAVER
ON
OFF
ENTER
ENTER
SETUP
ENTER
SETUP
NOTE
INITIALIZE
SETUP
QUICK
CUSTOM
INITIALIZE
SETUP INITIALIZE
Initialize?
NO
YES
SETUP
ENTER
ENTER
twice
SETUP
twice
- 31 - EN
If you choose a language that has a 3 letter language code, the code will be displayed every time you change the
AUDIO or SUBTITLE language setting above. If you choose any other languages, ‘---’ will be displayed instead. (3
letter language code is written in bracket.)
Language Code
A-B
Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851
C-E
Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech [CZE] 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Esperanto 5161
Estonian 5166
F-H
Faroese 5261
Fiji 5256
Language Code
Finnish [FIN] 5255
French [FRE] 5264
Frisian 5271
Galician 5358
Georgian 5747
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467
I-K
Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767
L-N
Laothian 5861
Latin 5847
Latvian;Lettish 5868
Language Code
Lingala 5860
Lithuanian 5866
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061
O-R
Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish [POL] 6258
Portuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467
S
Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Language Code
Shona 6560
Sindhi 6550
Singhalese 6555
Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568
T
Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Tu rkish [TUR] 6664
Tu rkmen 6657
Tw i 6669
U-Z
Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yo r uba 7161
Zulu 7267
LANGUAGE CODE LIST
CABLE CHANNEL DESIGNATIONS
TV Display
TV Display
TV Display
TV Display
TV Display
TV Display
TV Display
TV Display
CATV channel
TV Display
W+80 W+81 W+82 W+83 W+84
W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79
W+55 W+56 W+57 W+58 A-4 A-3 A-2 A-1 W+59 W+60 W+61 W+62 W+63 W+64
W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54
W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39
W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24
A-5
RSTUVWW+1 W+2 W+3 W+4 W+5 W+6 W+7 W+8 W+9
CDEFGH I JKLMNOPQ
5A 2 3 4 5 6 7 8 9 10 11 12 13 A B
1234567891011 12 13 14 15
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105
106 107 108 109 110 111 112 113 114 115 116 117 118 119 120
121 122 123 124 125
CATV channel
CATV channel
CATV channel
CATV channel
CATV channel
CATV channel
CATV channel
CATV channel
If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels
with letters or letter-number combinations. Please check with your local cable company. The following is a
chart of common cable channel designations.
DVD SECTION
CHANGING THE DVD SET UP ITEMS
EN - 32 -
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
possibilities. Before arranging for service, check these items. It could save your time and money.
TV Mode
PROBLEM CORRECTIVE ACTION
No picture or sound • Make sure the AC cord is connected to an AC outlet.
• Check antenna connection.
• Press
[SELECT] to select TV mode.
Then try other TV feature.
• Let the unit program its tuner memory.
No picture or poor picture on the • Adjust direction or replace antenna.
unit • Adjust picture controls.
• Check for broken pin of the antenna cable.
No sound or poor sound • Adjust volume control on remote control or main unit.
• Press [MUTE] to restore sound.
Bars on screen • If outside antenna is being used, check for broken wire.
• Check for local interference.
Picture distorted or blurred • Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
Picture rolls vertically • Try a new channel, if OK, then possible station trouble.
Lines or streaks in picture • If outside antenna is being used, check for broken wire.
• Check for local interference.
No color • Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust “COLOR” control.
Poor reception on some channels • Try a new channel, if OK, then possible station trouble.
Ghosts in picture • Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
Weak picture • Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust
“CONTRAST” & “BRIGHTNESS” control.
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, con-
sulting the following checklist.
PROBLEM CORRECTIVE ACTION
No power • Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
No operation by infrared remote • Check if the power plug is connected to an AC outlet.
control • Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote control.
• Refer to the infrared signal on page 34.
• You have to be within 23 feet (7m) of the unit.
• Check if the correct mode is selected. If not, switch the mode by
pressing
[SELECT], whichever you need.
TROUBLESHOOTING GUIDE
- 33 - EN
CLOSED CAPTION PROBLEM POSSIBLE REMEDY
Misspelling in captions • Error committed by the closed captioning production company.
• Possible in a live broadcast. Not in case of a prerecorded program.
Text is not shown in its entirety or • A few seconds of delay is common for live broadcast.
a delay occurs from what is being • Display capacity may not exceed 220 words per minute. If a dialogue
said. • exceeds that rate, selective editing is used to insure that the captions
• remain up-to-date with the current TV screen dialogue.
Captions scrambled with white • Caused by interferences of building, power lines, thunderstorms, etc.
boxes
No captions in a program which
• The broadcast may use a time compression process to speed up the
must contain closed caption
program. The decoder cannot read the compressed information and
• captions will be lost.
Black box in the TV screen • You are in TEXT mode. Select a CAPTION mode (
“CAPTION1”,
“CAPTION2”) or Caption “OFF”.
PROBLEM CORRECTIVE ACTION
Sound OK, picture poor • Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Adjust “CONTRAST” & “BRIGHTNESS” control.
Picture OK, sound poor • Try a new channel, if OK, then possible station trouble.
• Check for local interference.
No operation by infrared remote • Make sure the AC cord is connected to an AC outlet.
control • Check batteries in remote control.
•
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels
may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen.
NOTE
EN - 34 -
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owner’s Manual for details on correct operations.
•
Playback from a desired track and random playback are not available during program playback.
PROBLEM CORRECTIVE ACTION
No picture • Insert a correct video disc that plays on this unit.
• Press [SELECT] to select DVD mode, then try other DVD feature.
Disc cannot be played
• Insert the disc.
• Clean the disc.
• Place the disc correctly, with the label facing back of the unit.
• Cancel the parental control or change the control level.
No sound
• Connect the audio cables firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output
• This unit does not support DTS audio. This is not a malfunction.
Distorted picture
• There are some cases where pictures may be slightly distorted, which
are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language • The selected language is not available for audio or subtitles on the
does not match the set up DVD. (This is not a malfunction.)
The camera angle cannot be changed • The DVD does not contain sequences recorded from different camera
angles. (This is not a malfunction.)
Audio or subtitle language cannot be • The DVD does not contain audio source or subtitles in the selected
changed language. (This is not a malfunction.)
“Prohibited icon” appears on the • That operation is prohibited by the unit or the disc.
screen, prohibiting an operation (This is not a malfunction.)
CD sound dropout • Scratched disc. Replace the disc with an unscratched one.
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction
Disc cannot be inserted • Check if any disc is already in.
Disc cannot be taken out • Unplug and plug again the power cord to the outlet, and then press
[EJECT A] on the remote control.
• Press and hold
[EJECT A] on the unit for more than 5 seconds.
DVD Mode
NOTE
IR SIGNAL CHECK
Use the AM radio or the digital camera to check if the remote control
properly sends out the infrared signal. It will help to define the cause of malfunction.
Using AM radio
•Tune the AM radio to no broadcasting band.
Press any button on remote control toward the radio.
If the radio receives the signal from remote control properly,
the sound will flutter.
Using digital camera
(including built-in camera of cellular phone)
•Press and hold any button on remote control toward
a digital camera. The remote control is working
if you confirm infrared light through the digital camera.
- 35 - EN
CABINET CLEANING
•
Wipe the front panel and other exterior surfaces of the
unit with a soft cloth immersed in lukewarm water and
wrung dry.
•
Never use a solvent or alcohol. Do not spray insecticide
liquid near the unit. Such chemicals may cause damage
and discoloration to the exposed surfaces.
SERVICING
•
Should your unit become inoperative, do not try to cor-
rect the problem by yourself. There are no user-service-
able parts inside. Turn off, unplug the power cord and
please call our help line mentioned on the front page,
to locate an Authorized Service Center.
IF THE LASER OPTICAL PICKUP UNIT
IS DIRTY
•
If the unit still does not perform properly when it is oper-
ated, while referring to the relevant sections and to
“TROUBLESHOOTING GUIDE” in this Owner’s
Manual, the laser optical pickup unit may be dirty.
Consult your dealer or an Authorized Service Center for
inspection and cleaning of the laser optical pickup unit.
PICTURE SCREEN CLEANING
•
If the liquid crystal display panel should require clean-
ing, wipe it with a cotton or soft cloth. Before cleaning
the picture screen, disconnect the power cord.
•
Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
•
Always store the disc in its protective case when it is not used.
•
To clean-off, use a soft cloth.
•
Do not use a hard cloth since this will mar the disc.
•
Wipe the disc in a straight line from center to edge.
•
Never wipe with a circular motion.
•
Do not use detergent or abrasive cleaning agents.
MAINTENANCE
DISC HANDLING
LCD : 20 inch
Television system : NTSC-M
Closed caption system : §15.119/FCC
Channel coverage:
VHF: 2 ~ 13
UHF: 14 ~ 69
CATV: 2 ~13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System: 181 channels
frequency synthesized
tuning system
Channel access: Direct access keyboard,
programmable
scan and up/down
Product type: DVD Player
Discs: DVD video, Audio CD
CD-RW/-R with MP3 files
•
Designs and specifications are subject to change without notice.
•
If there is a discrepancy between languages, the default language will be English.
TV
DVD
GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS
Sound output: 2 speakers, 1W, 8 ohm
OTHER SPECIFICATIONS
Terminals
Antenna input: VHF/UHF/CATV
75 ohm unbalanced (F-type)
S-Video input: Mini DIN 4-pin jack
Video input: RCA connector [ 1
Audio L/R input: RCA connector [ 4
Component video input:
One pin jack (Y), 1Vpp (75 ohm)
Two pin jacks (Pr)/(Pb), 700mVpp (75 ohm)
Coaxial digital audio output:
One pin jack, 500mVpp (75 ohm)
Headphone: 1/8" stereo (3.5mm)
Remote control: Digital encoded
infrared light system
Operating
temperature: 5°C to 40°C
(41°F~104°F)
Power requirements: AC 120V, 60Hz
Power consumption
(Maximum): 61W
LCD: 20"
Dimensions: H :18-5/16" (465mm)
W :23-3/8" (594mm)
D: 9-1/8" (231mm)
Weight: 14.8lbs. (6.7kg)
SPECIFICATIONS
ES - 36 -
1.Botón POWER
Presione para encender y apagar la unidad.
2.Botón PICTURE
Presione para ajustar la imagen.
3.Botones numéricos
Presione para seleccionar directamente el número
de canal deseado.
Botón +100 (para modo TV)
Presione para seleccionar canales cuyo número
sea superior a 99.
Botón +10 (para modo DVD)
Presione para introducir los números superiores a
9 deseados.
4.Botón SLEEP
Presione para ajustar el temporizador de reposo.
5.Botones SKIP H / G
Presione una vez para omitir capítulos o pistas y
desplazarse a un punto específico.
6.Botón PLAY O
Presione para reproducir el disco.
7.Botón PAUSE F
Presione para hacer una pausa en la reproducción
del disco actual.
8.Botón DISPLAY
Para modo TV
:
Presione para visualizar el número actual de canal en
la pantalla del televisor.
Para modo DVD
:
Presione para visualizar el estado actual en la pan-
talla del televisor.
9.Botón SETUP
Presione para entrar o salir del menú de configu-
ración del TV/DVD.
10. Botón TITLE
Presione para visualizar el menú de títulos.
11. Botón CLEAR
Presione para cancelar o borrar un ajuste intro-
ducido actualmente.
Presione para borrar la pantalla “DISCO ADEN-
TRO”.
12. Botón MODE
Presione para visualizar la pantalla de la repro-
ducción programada o la de reproducción aleato-
ria en el modo de parada.
Presione para visualizar la pantalla de ajuste del
nivel del negro o la pantalla de sonido envolvente
durante la reproducción.
13. Botón SEARCH MODE
Presione para localizar un punto deseado.
14. Botón AUDIO
Para modo TV: Presione para seleccionar el
modo de sonido de TV (ESTEREO/SAP/MONO).
Para modo DVD: Presione para seleccionar un
idioma de audio deseado (si está disponible).
15. Botón EJECT A
Presione para extraer un disco de la unidad.
16. Botón SELECT
Presione para seleccionar el modo TV, modo de
entrada externa o modo de DVD.
17. Botones CH. K / L
Presione para seleccionar canales memorizados.
18. Botones VOL. X / Y
Presione para controlar el nivel de volumen del
DVD y el televisor.
19. Botón MUTE
Presione para silenciar el sonido. Presiónelo de
nuevo para restablecer el sonido.
20. Botón ZOOM
Presione para ampliar la parte de la imagen repro-
ducida en un DVD.
- MANDO A DISTANCIA
CONTROLES DE OPERACIÓN Y FUNCIONES
■ INDICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 36
PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 37
■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 38
CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 38
CONEXIÓN EXTERNA . . . . . . . . . . . . . . . . . . . . . . . . . 39
SECCIÓN DE TV
■ OPERACIÓN DE TV Y AJUSTES . . . . . . . . . . . . . . . . . 40
INSTALACIÓN INICIAL . . . . . . . . . . . . . . . . . . . . . . . . 40
PARA MIRAR UN PROGRAMA DE TV . . . . . . . . . . . . 40
AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
IDIOMA DE MENÚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
SECCIÓN DE DVD
■ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 42
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . . . . . . 42
MENÚ DE DISCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
REANUDACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
INDICE
• Para saber cómo funciona el mando a distancia, consulte la [Fig.1] de la página 7.
NOTA
•
Para elegir el modo de DVD presione primero [PLAY O] o [EJECT A], o introduzca un disco en la ranu-
ra. De otra manera, el DVD no funcionará.
PARA INSERTAR LAS PILAS
1 Abra la cubierta del compartimiento de las
pilas empujando la cubierta del mando a dis-
tancia en el sentido de la flecha.
2 Inserte 2 pilas “AA” en el compartimiento de
las pilas, en el sentido indicado por las mar-
cas de polaridad (+/-).
3 Vuelva a poner la cubierta.
PRECAUCIONES A LA HORA DE
INSERTAR LAS PILAS
•
Asegúrese de seguir la polaridad correcta, tal como
se indica en el compartimiento de las pilas. Si se
colocan las pilas con la polaridad invertida se
pueden ocasionar daños a la unidad.
•
No mezcle distintos tipos de pilas (ej. alcalina y de
carbón-zinc) o pilas viejas con nuevas.
•
Si no va a usarse la unidad durante un período
largo de tiempo, quite las pilas para prevenir daños
o lesiones ocasionadas por posibles fugas de las
pilas.
•
No intente recargar las pilas que no sean para
recargar; pueden sobrecalentarse y estropearse.
- 37 - ES
NOTA
21. Botón REV h
Presione para ver la imagen en DVD en retroceso
o en cámara lenta de retroceso.
Botón FWD g
Presione para mover en avance rápido o en
cámara lenta en el disco.
22. Botón STOP C
Presione para detener la reproducción del disco.
23. Botón DISC MENU
Muestra el menú del DVD.
24. Botón ENTER
Presione para establecer un ajuste.
25. Botones
K
(Arriba) /
L
(Abajo) /
{
(Izquierda) /
B
(Derecha)
Presione para seleccionar o ajustar los ítems del
menú.
26. Botón RETURN
Presione para volver a la pantalla anterior en el
menú de configuración.
27. Botón A-B
Presione para repetir la reproducción de una sec-
ción seleccionada.
28. Botón ANGLE
Presione para cambiar el ángulo de la cámara y
ver la secuencia que se está reproduciendo desde
un ángulo diferente (si existe).
29. Botón REPEAT
Repite la reproducción del disco, título, capítulo,
grupo o pista actual.
30. Botón SUBTITLE
Presione para seleccionar el idioma de los subtí-
tulos.
•
No se recomienda el uso de mandos a distancia universales. No todas las funciones pueden controlarse
con un mando a distancia universal.
Si decide usar un mando a distancia universal con esta unidad, sea consciente de que el número de código
suministrado puede no adecuarse a la unidad. En este caso, llame al fabricante del mando a distancia uni-
versal.
31. Botón MENU
Presione para entrar o salir del menú de configu-
ración del TV/DVD.
32. Botón STOP C
Presione para detener la reproducción del disco.
33. Botón PLAY B
Presione para reproducir el disco.
34. Botón EJECT A
Presione para extraer un disco de la unidad.
35. Botones VOLUME Y / X
Presione para controlar el nivel de volumen del
DVD y el televisor.
36. Botones CHANNEL L / K
Presione para seleccionar canales memorizados.
37. Botón SELECT
Presione para seleccionar el modo TV, modo de
entrada externa o modo de DVD.
38. Botón POWER
Presione para encender y apagar la unidad.
39. Ventanilla del sensor de mando a distancia
- PANEL DE CONTROL
• Para ver la ilustración del panel de control, vaya a la página 8, [Fig. 2].
ES - 38 -
SI TIENE UNA TOMA DE PARED
Conecte el televisor a la toma de antena de pared con
el cable RF (disponible en los comercios).
SI TIENE CABLE DE HILOS
Conecte el televisor al cable de antena.
•
Antes de conectar la antena en la toma ANT de la unidad,
compruebe que la patilla no esté torcida. Si lo está, ponga la
patilla recta tal como se muestra en la ilustración y a contin-
uación conecte la patilla a la toma ANT de la unidad.
•
Los cables utilizados aquí están disponibles en los comercios.
•
Para su seguridad y para evitar daños a la unidad, desconecte el cable de antena de la toma ANT
antes de trasladar la unidad.
NOTA
PREPARACIÓN PARA LA UTILIZACIÓN
CONEXIONES DE ANTENA/CABLE
- CONEXIONES DE ANTENA/CABLE
DIGITAL
AUDIO OUT
(COAXIAL)
R
L
Y
P
b
P
r
R
L
V
ID
E
O
S
-
V
I
D
E
O
V
I
D
E
O
2
C
P
M
P
O
N
E
N
T
A
U
D
I
O
A
U
D
I
O
V
I
D
E
O
1
A
N
T
H
E
A
D
P
H
O
N
E
Cable RF
[Parte posterior de
este unidad]
desde Señal del TV
cable o Antena
ANT
D
I
G
I
T
A
L
A
U
D
I
O
O
U
T
(
C
O
A
X
I
A
L
)
R
L
Y
Pb
Pr
R
L
V
I
D
E
O
S-VIDEO
V
I
D
E
O
2
C
P
M
P
O
N
E
N
T
A
U
D
I
O
A
U
D
I
O
V
I
D
E
O
1
A
N
T
H
E
A
D
P
H
O
N
E
A
N
T
SALIDA ENTRADA
Cable coaxial
de 75 ohmios
Caja de convertidor
o caja de satélite
[Parte posterior de este unidad]
desde Compañia de Cable o
plato del satélite
Para el instalador de sistemas CATV:
•
Esta nota tiene la finalidad de llamar la atención del instalador de sistemas CATV para que tenga en cuenta el
Artículo 820-40 de la NEC, que proporciona recomendaciones para hacer una conexión a tierra apropiada y, en par-
ticular, especifica que la tierra del cable debe conectarse al sistema de puesta a tierra del edificio, tan cerca del punto
de entrada del cable como sea posible.
NOTA
Patilla torcida
Cable
Conector
(Debe ponerse
recta)
(patilla recta)
NOTA
CUANDO SE USA UNA CAJA DE CON-
VERTIDOR/CAJA DE SATÉLITE
Si su compañía de televisión por cable le suministra
una caja de convertidor o si usa un sistema de
satélite, podrá utilizar la conexión básica que se
muestra anteriormente.
La selección de los canales deberá hacerse con la
caja de convertidor o caja de satélite. Esto significa
que no es posible cambiar de canal utilizando el
mando a distancia de la unidad.
- CONEXIÓN CON CAJA DE CONVERTIDOR /CAJA DE SATÉLITE
- SALIDA DE AUDIO
D
IG
IT
A
L
A
U
D
IO
O
U
T
(C
O
A
X
IA
L
)
Descodificador Dolby Digital
A toma de ENTRADA
DIGITAL COAXIAL DE AUDIO
Equipo doméstico de audio
Podrá disfrutar de un sonido de DVD con
más presencia desconectando el equipo de
audio digital, tal como el descodificador
Dolby Digital.
- ENTRADA DE VÍDEO2
L
Y
Pb
Pr
R
COMPONENT
V
ID
E
O
2
A
U
D
IO
Cable de audio
Videojuego
ej.
(SALIDA)
(SALIDA)
Cable de vídeo
componente
Use esta conexión si el equipo A/V (ej. videocámara
o videojuego) tiene tomas de salida de vídeo COM-
PONENTE (Y,Pb,Pr). Podrá disfrutar de una mejor
imagen con esta conexión.
- 39 - ES
•
La fuente de audio de un disco en formato ambiental multicanal Dolby Digital no puede ser grabado
como sonido digital por una platina MD o DAT.
•
Si conecta un descodificador Dolby Digital, ajuste la función “DOLBY DIGITAL” a “BITSTREAM” para
salida de audio en el modo de configuración.
•
A menos que se haga la conexión a un decodificador “DOLBY DIGITAL” a “PCM” para salida de audio
en el modo de configuración.
La reproducción en una unidad utilizando ajustes incorrectos puede generar ruido y distorsión, y también
puede provocar daños a los altavoces.
NOTA
•
Si su propio equipo es monofónico (sólo tiene una toma de audio), conecte el cable de audio a la toma AUDIO L de esta unidad.
•
Si conecta la toma VIDEO y la toma S-VIDEO simultáneamente, se da prioridad a la S-VIDEO.
Puede conectar esta unidad a su equipo de audio/vídeo.
•
Asegúrese de apagar todos los componentes del
sistema antes de conectar otro componente.
•
Consulte los manuales de instrucciones de los
componentes que va a conectar a la unidad.
- ENTRADA DE VÍDEO1
CONEXIÓN EXTERNA
D
IG
ITA
L
A
U
D
IO
O
UT
(C
O
A
XIA
L
)
R
L
Y
P
b
P
r
R
L
V
I
D
E
O
S-VIDEO
V
I
D
E
O
2
C
P
M
P
O
N
E
N
T
A
U
D
I
O
A
U
D
I
O
V
I
D
E
O
1
A
N
T
H
E
A
D
P
H
O
N
E
AUDIO
VIDEO2
VIDEO1
Cable de audio
Videograbadora
ej.
(SALIDA)
(SALIDA)
(SALIDA)
Cable VIDEO-S
O
Cable de vídeo
R
L
S
-V
ID
E
O
V
ID
E
O
V
ID
E
O
1
A
U
D
IO
NOTA
Use esta conexión si su propio equipo A/V (ej.
videograbadora) tiene tomas de salida de audio y
vídeo. Cuando se usa un cable Vídeo-S, se obtiene
una imagen mejor.
Fabricado bajo licencia de Dolby Laboratories. “Dolby” y el símbolo de la doble D son marcas comerciales de
Dolby Laboratories.
Cuando utilice las tomas de entrada externa, seleccione
“AUX1” o “AUX2” presionando [SELECT]. (Consulte
la página 40.)
•
Para utilizar la tomas VIDEO1, seleccione
“AUX1”.
•
Para utilizar la tomas VIDEO2, seleccione
“AUX2”.
NOTA
ES - 40 -
OPERACIÓN DE TV Y AJUSTES
SECCIÓN DE TV
VOLUMEN 20
C C C C C C C C C C C C C C C C
VOL.
- SUGERENCIAS ÚTILES -
1. VERIFIQUE ANTENA/CABLE/STATÉLITE
ESTÁ BIEN CONECTADO.
2. VERIFIQUE “PREA. AUTO CA.” ESTÁ
BIEN AJUSTADO.
3. LEA LA PÁGINA FRONTAL DEL MANUAL
DEL USUARIO O PANEL TRASERO PARA
EL NO. TEL. DE AYUDA A LOS CLIENTES.
Cuando se enciende la unidad por primera vez, se
muestra la pantalla de SELECT LANGUAGE.
Seleccione el idioma de visualización de pantalla y
ejecute la autoprogramación del canal.
1
Después de finalizar la conexión de la
antena o del cable, conecte el cable de
alimentación a una toma estándar de CA.
• Si se visualiza algún dígito en la esquina de la
pantalla, presione [POWER] sin desconectar
el cable de alimentacíaon.
2 Presione [POWER] para encender la unidad.
3 Presione cualquier tecla para
seleccionar el idioma del
menú de pantalla.
•
ENGLISH: [CH.
K
]
•
ESPAÑOL: [CH.
L
]
•
FRANÇAIS: [VOL.
X
]
4
Confirme la conexión de la antena
(o del cable) y presione [CH.
K
].
•
El sintonizador explora y
memoriza todos los canales
activos de su zona.
5 Cuando la exploración ha
finalizado, el sintonizador se
detiene en el canal
memorizado más bajo.
•
Si [MENU] se presiona durante la exploración
de canales, el sintonizador interrumpe la
exploración y se muestra el canal memorizado
más bajo.
•
El menú INSTALACIÓN INICIAL se muestra
cada vez que usted enciende la unidad a menos
que la exploración se haya finalizado.
•
En caso de que no pueda
recibirse ningún canal mediante
la exploración de canales, “NO
HAY SEÑAL DE TV” aparece
en pantalla. Apague la unidad y
compruebe la conexión de la
antena; a continuación, siga los pasos 1 a 5 otra vez.
•
Puede cambiar el después de finalizar la INSTA-
LACIÓN INICIAL mediante el menú IDIOMA o el
menú AJUSTE DE CANAL. (Consulte “IDIOMA DE
MENÚ ” o “AJUSTE DE CANAL” en página 41).
1 Presione [POWER] para encender la unidad.
•
Si la pantalla del TV muestra
"interferencias de nieve" y
no funciona bien durante
más de 5 segundos,
aparecerá “SUGERENCIAS ÚTILES”.
Siga las instrucciones de la pantalla.
•
Si este ajuste no funciona correctamente,
llame a nuestro teléfono de asistencia (en la
portada en este manual del usuario).
2
Presione [CH. K / L] o los botones numéricos
para seleccionar el número de canal deseado.
Para seleccionar el número de canal medi-
ante los botones numéricos:
•
Para seleccionar un número de canal de un
solo dígito, presione primero [0] (ej. Para el
canal 2, presione [0] [2]).
•
Para seleccionar canales por cable cuyos números
sean superiores a 99, presione primero[+100/+10]
(ej. Para el canal 125, presione [+100/+10] [2] [5]).
3 Presione [VOL.
XX
/
YY
] para seleccionar el
nivel de volumen deseado.
•
Presione [MUTE] para silenciar el sonido al instante.
Vuelva a presionarlo para restaurar el nivel de
volumen anterior.
•
Si presiona [CH. K / L] en el modo DVD,
puede cambiar los canales del televisor. Incluso
si apaga la unidad en el modo DVD, cuando
vuelve a encenderlo se pondrá en el modo TV.
PARA VER UN CANAL POR CABLE O SATÉLITE
Si la unidad está conectada a una caja de convertidor o
caja de satélite, presione [CH. K / L] para seleccionar
CA3 o CA4 según el ajuste de canal de salida del
aparato, y seleccione en él el canal deseado.
PARA VER SEÑALES DE ENTRADA DE
UN DISPOSITIVO EXTERNO
Cuando conecte un equipo externo a las tomas de
entrada delanteras AUDIO/VIDEO, presione
[SELECT] o [CH. K / L] repetidamente hasta que
aparezca en la pantalla “AUX1” o “AUX2”.
PARA MIRAR UN PROGRAMA DE TV
CH.
POWER
123
456
789
0 +10
+100
NOTA
NOTA
O
CA 15
(Ejemplo)
TV
TV
NO HAY SEÑAL DE TV
INSTALACIÓN INICIAL
SELECT LANGUAGE
ENGLISH NEXT:PRESS CH
K
ESPAÑOL DESPUÉS:PRESIONE CH
L
FRANÇAIS APRÈS:PRESSEZ VOL
X
– INSTALACIÓN INICIAL –
CONECTE LA ANTENA O CABLE O
SATÉLITE EN ESTA UNIDAD.
PRESIONE CH
K,
PARA REALIZAR EL
“PREA. AUTO CA.”.
NOTA
POWER
NOTA
NOTA
- 41 - ES
PROGRAMACIÓN AUTOMÁTICA DE CANAL
De acuerdo con la configuración de fábrica, esta
unidad ha memorizado todos los canales, incluidos
los que no están disponibles en su localidad. Esta
función solo pone automáticamente en memoria los
canales disponibles.
1 Presione [SETUP] y a continuación presione
[
K
] o [
L
] para señalar “AJUSTE DE CANAL”.
2 Presione [ENTER] y a continuación presione
[
K
] o [
L
] para señalar “PREA. AUTO CA.”.
3 Presione [ENTER].
•
El sintonizador explora y memoriza todos los
canales activos de su localidad.
•
El sintonizador se detiene en el canal memorizado
inferior.
•
Cuando está activado “PREA. AUTO CA.”
donde no hay entrada de señal de TV, apare-
cerá “NO HAY SEÑAL DE TV” en la pan-
talla después de completarse la exploración
de los canales.
•
La unidad puede reconocer canales CATV
como canales de TV si las condiciones de
recepción son malas. En este caso, com-
pruebe la conexión de la antena y vuelva a
intentar “PREA. AUTO CA.” cuando las
condiciones de recepción mejoren.
•
La autoprogramación del canal NO es
necesaria cuando la unidad está conectada
a una caja de convertidor o caja de satélite.
Sólo tiene que seleccionar el canal para
caja de convertidor o entrada de satélite
(ej. CA3 o CA4) de la unidad y a contin-
uación seleccione el canal que desee en la
caja de convertidor o la caja de satélite.
1 Presione [SETUP] y a continuación presione
[K] o [L] para seleccionar el “IDIOMA”.
2 Presione [ENTER] repetidamente para selec-
cionar “ENGLISH” = inglés, “ESPAÑOL” o
“FRANÇAIS”= francés.
3 Presione [SETUP] para salir del menú.
•
Esta función selecciona sólo el idioma del
menú de pantalla; no la fuente de audio.
•
Si por alguna razón el menú está en español o
en francés, presione [SETUP], luego [K] o
[L] para seleccionar “LANGUAGE [ENG-
LISH]” o “LANGAGE [FRANÇAIS]”, y a
continuación presione [ENTER] repetida-
mente para seleccionar el idioma deseado y
luego presione [SETUP].
SETUP
- TV PREP. -
B AJUSTE DE CANAL
AJUSTE DE V-CHIP
IDIOMA [ESPAÑOL]
TITULO [OFF]
LUZ DE FONDO
[BRILLO]
ENTER
– AJUSTE DE CANAL –
AGREGAR/BORRAR CA (CATV)
B PREA. AUTO CA.
ENTER
AJUSTE DE CANAL
NOTA
- TV PREP. -
AJUSTE DE CANAL
AJUSTE DE V-CHIP
B IDIOMA [ESPAÑOL]
TITULO [OFF]
LUZ DE FONDO
[BRILLO]
SETUP
SETUP
ENTER
IDIOMA DE MENÚ
NOTA
ES - 42 -
•
Los botones sombreados se utilizan para las sigu-
ientes operaciones.
PARA EMPEZAR
Si es necesario, encienda el amplificador y cualquier
otro componente.
1 Presione [POWER] para encender la unidad.
2 Abra la bandeja del disco manualmente.
3
Introduzca el disco elegido con la etiqueta hacia la
parte trasera de la unidad para reproducirlo. Al
presionar suavemente el disco para introducirlo en la
ranura, su reproducción empezará automáticamente
,
luego cierre la puerta del disco manualmente.
•
La reproducción empezará desde el primer capí-
tulo/pista del disco.
•
Si la reproducción no empieza automáticamente,
presione
[PLAY O].
•
Cuando reproduzca un DVD que incluya un menú
de títulos, este menú puede aparecer en pantalla.
4
Presione [STOP C] para detener la reproducción.
5 Precione [EJECT A] para extraer la disco de
la unidad.
•
Cuando el modo DVD se ha cambiado al modo
TV, el modo DVD se desactiva primero y a
continuación aparece la imagen y suena el
sonido en el TV al cabo de unos 4 segundos.
De la misma manera, cuando se presiona
[POWER] para apagar la unidad en el modo
DVD, este modo se desactiva primero y a con-
tinuación se apaga la unidad.
•
Puede aparecer “”en la parte superior
derecha de la pantalla del TV durante su fun-
cionamiento, que avisa de que el DVD o el
disco han encontrado una operación prohibida.
•
Con los DVD que utilizan títulos para señales
de reproducción programada, la reproducción
puede empezar desde el segundo título y
puede omitir estos títulos.
•
Durante la reproducción de un disco de dos
capas, las imágenes pueden detenerse durante
un rato. Esto ocurre cuando la 1ª capa cambia
a la 2ª. No se trata de una anomalía.
•
Si el disco no expulsa en el paso 5, presione y
detenga [EJECT
AA
] en la unidad para
expulsar el disco.
REPRODUCCIÓN DE MP3
1
En el modo de parada, presione [DISC MENU] y precione
[
KK
] o [
LL
] para seleccionar el grupo o pista que desee.
•
Si ha selecciona un grupo, presione [B] o
[ENTER] para ir a la pantalla de selección de
pistas. Presione [s] para volver a la pantalla
anterior (excepto la página superior).
•
Si ha seleccionado una pista, presione [ENTER] para
empezar a reproducir pistas. Si empieza por la que
acaba de elegir se reproducirán las pistas siguientes.
•
Si no puede visualizarse enseguida en pantalla la
lista entera de archivos, aparece la “
n
”para ir a la
página siguiente.
•
Presione [TITLE] para volver al archivo superior
de la jerarquía más alta del programa y de la
lista de archivos.
2
Presione [STOP
CC
] para detener la reproducción.
REPRODUCCIÓN DE UN DISCO
REPRODUCCIÓN BÁSICA
REV
SLOW
PLAY
STOP
FWD
ENTER
PAUSE
DISC
MENU
RETURNTITLESETUP
DISPLAY
SKIP
MUTEZOOM
SELECT
POWER PICTURE
EJECT
3
POWER
NOTA
SECCIÓN DE DVD
EJECT
STOP
Nombre de carpeta 1
LISTA DE ARCHIVOS
Nombre de carpeta 2
Nombre de carpeta 3
Nombre de carpeta 4
Nombre de archivo 1
Nombre de archivo 2
Nombre de archivo 3
Nombre de carpeta 1
NOMBRE DE DISCO
DISC
MENU
STOP
- 43 - ES
1 Presione [DISC MENU].
•
Aparecerá el menú principal de DVD.
•
Si esta función no está disponible, el símbo-
lo puede aparecer en la pantalla del televisor.
•
Si el menú de disco está disponible en el disco,
aparecerán las opciones de idioma de audio, de
subtítulos, capítulos del título y otras para su
selección.
2 Presione [K], [L], [s] o [B] para seleccionar
un ítem y presione [ENTER] para confirmar la
selección.
REANUDACIÓN
MENÚ DE DISCO
DISC
MENU
ENTER
STOP
PLAY
Presione 'PLAY' para reproducir
desde aquí.
Para reproducir desde el inicio,
primero presione 'STOP' y luego 'PLAY'.
REANUDACIÓN ACTIVADA
•
Las carpetas se conocen como grupos; los
archivos, como pistas.
•
Los archivos MP3 van acompañados de iconos.
•
Se puede reconocer un máximo de 255 carpetas.
•
Se puede reconocer un máximo de 999 archivos.
•
Pueden crearse hasta 8 jerarquías.
Se recomienda para esta unidad el uso de archivos
grabados según las especificaciones siguientes:
•
Frecuencia de muestreo: 44,1 kHz o 48kHz
•
Velocidad de transmisión de bits constante:
32kbps ~ 320kbps
•
Para archivos MP3 grabados en velocidad de trans-
misión de bits variable (VBR), la unidad puede no
mostrar el tiempo real transcurrido.
3
NOTA
1 Durante la reproducción, presione [STOP C].
•
Aparecerá el mensaje de reanudación en la pan-
talla del TV.
2 Presione [PLAY O], la reproducción contin-
uará desde el punto donde se paró la repro-
ducción.
•
Para cancelar el modo de reanudación, presione
dos veces [STOP C].
•
Para MP3, la reproducción se reanudará desde el
principio de la pista actual.
•
La información de reanudación permanece activa-
da incluso cuando apaga el interruptor principal.
Printed in China 1EMN21903
L2653UD ★★★★★
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship
as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Certain parts and LCD image burn-in are not covered under this
warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH
THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or
if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not
purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED
SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN
AUTHORIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER.
FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior
written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,
please contact us at:
FUNAI CORPORATION
Customer Service
Tel :1-800-968-3429
http://www.SylvaniaConsumerElectronics.com
19900 Van Ness Avenue, Torrance, CA 90501
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
Sylvania 6620LDG Manual de usuario
- Categoría
- Reproductores de DVD
- Tipo
- Manual de usuario
- Este manual también es adecuado para
En otros idiomas
- English: Sylvania 6620LDG User manual
