MG-120 User manual Version 1.3 1/1
MG-120
WARNING:
⋅ Ensure correct polarity of Cells. Insert the batteries in
the correct direction by aligning the (–) marks on the
batteries with the spring in the back cover.
⋅ When the megaphone is not in use for a long period,
remove the cells.
⋅ Drained cells will not give sufficient sound volume.
MEGAPHON
FEATURES
√ Dry cells operation.
√ All ABS Body, sturdy yet light weight.
√ Built–in Siren and Music & Microphone.
√ Clear sound, long range & efficient design.
√ Conveniently located Volume Control & Switch.
1. Open the Back Cover by pressing the Open Button.
2. Insert 6 nos. UM-1 cells then close the back cover until it locks. Now your megaphone is ready for action.
3. To activate the megaphone, press the ON/OFF Button on the Back Cover or press the Button on the grip when holding it in the
hand.
4. When using the megaphone, place your lips as close as possible to the megaphone. Adjust the Volume Control to the desired
level without causing any howling or feedback.
5. Press Music button to activate music. To switch off the music, press the same button again, or press the ON/OFF button.
6. Press Alarm button to activate Emergency alarm. To switch off the alarm, press the same button again, or press the ON/OFF
button.
Model MG-120
Power output (Rated) 20 W
Power output (Maximum) 35 W
Coverage range 0,5 km
Power source 6 x UM-1 cells
Microphone Unidirectional
Dimensions (mm) Ø 200 x 340 (depth)
Weight 1,5 kg (without cells)
Working voltage 9 V
SPECIFICATIONS
OPERATION