Yamaha THR10II Wireless Manual de usuario

Marca: Yamaha

Modelo: THR10II Wireless

Tipo: Manual de usuario

Este manual también es adecuado para

THR30II Wireless THR10II Wireless THR10II Reference Manual 1

Reference Manual

Guitar Amplifier

Contents

Introduction ...........................................................................2

Main Features ............................................................................. 2

Accessories ................................................................................ 2

Names and Functions ..........................................................3

Control Panel .............................................................................. 3

Rear Panel .................................................................................. 6

Connection ............................................................................7

Connection Example (on THR30II Wireless) .............................. 7

Power ......................................................................................... 8

Connecting to guitar by wireless (THR-II Wireless only) ............ 9

Connecting to a smart device ................................................... 10

Connecting to a computer ........................................................ 12

Troubleshooting .................................................................14

Specifications .....................................................................16

Technical Specifications ........................................................... 16

THR30II Wireless, THR10II Wireless*

Power Button LED status list ............................................ 17

Signal Flow Diagrams ............................................................... 18

Amp Modeling List .................................................................... 19

THR30II Wireless THR10II Wireless THR10II Reference Manual 2

Thank you for purchasing this Yamaha product.

This product is an exceptionally versatile and compact guitar amplifier designed for use in your home, rehearsal

spaces, and other places—virtually anywhere you want it!

We recommend that you read this manual carefully so that you can fully take advantage of the advanced and

convenient functions of the product. We also recommend that you keep this manual in a safe and handy place

for future reference

Main Features

• Sophisticated guitar amplifier utilizing advanced amp modeling, made possible with Yamaha’s origi-

nal VCM technology

• Advanced wireless guitar transmitter Relay G10T (made by LINE6) for wireless use (THR30II Wireless

and THR10II Wireless only)

• Bluetooth® capability enables playing music and editing sound settings from a smart device and a

computer.

• Built‐in rechargeable battery enables use without power adaptor.

• Yamaha’s original Extended Stereo technology enables an exceptionally wide stereo image, much

wider than the unit’s compact size.

• The audio interface capability enables recording your guitar to computer via USB.

• Incorporates a chromatic auto tuner.

* What is VCM Technology?

An original physical modeling technology developed by Yamaha, VCM Technology reproduces the characteristics of analog

circuitry at a micro level to accurately reproduce the sound of the modeled equipment.

Accessories

•Power Adaptor

•Quick Guide

• Safety Instructions Sheet

• Service Offices list

• Cubase AI Download Information

In this document, the THR30II Wireless, THR10II Wireless and THR10II are collectively

called THR-II. The THR30II Wireless and THR10II Wireless are called THR-II Wireless.

Introduction

THR30II Wireless THR10II Wireless THR10II Reference Manual 3

Control Panel

q [ ] (Power Button) / Power Button LED

This is the unit’s power button.

When the power is ON, the Power Button LED, the lamp corresponding to the selected amp type and the

Power Lamp in the speaker cabinet light.

w LED Display

Indicates each of the THR-II’s settings and conditions.

e [TAP/TUNER] button

 Tuner Function

Holding the switch for 1 second engages the tuner function and lights the indicators.

The tuner is calibrated to A4=440Hz. Tune the guitar until the desired pitch appears in the LED display.

When only the circle ( ) in the center of the display is visible, tuning is accurate.

Press the [TAP/TUNER] button (less than one second) to turn OFF the tuner function.

* When the tuner function is set to ON, the guitar sound to the main speaker, [PHONES] jack, and [USB] jack is muted. The

sounds from the [AUX] jack, [USB] jack and Bluetooth are output to the main speaker and [PHONES] jack.

Names and Functions

e y u i o !0

!1 !2 !3 !4

e t y u i o !0 !1 !2 !3 !4r

!8 !9

THR30II Wireless

THR10II Wireless

THR10II

THR10II Wireless only

Pitch is low Pitch is highIn tune

THR30II Wireless THR10II Wireless THR10II Reference Manual 4

Names and Functions

 Tap Tempo Function

When an ECHO or ECHO/REV effect is selected with the [ECHO/REV] knob !2 control, the tempo of the

delay can be set by tapping (more than twice) on the switch.

 Extended Stereo Setting

Hold the switch for more than three seconds to switch the Extended Stereo* function ON/OFF.

ON: “#” on LED Display w is off (default setting).

OFF: “#” on LED Display w is lit.

* Extended Stereo: The Extended Stereo function produces a much wider stereo field. Extended Stereo affects the sounds

from the [AUX] jack, [USB] jack and Bluetooth as well as the guitar sounds with reverb effects applied.

* The Extended Stereo setting (ON/OFF) is saved when the power is turned OFF.

r [AMP] knob

Selects the amp type. The lamp for the corresponding amp type lights.

* When the power is turned ON, the most recent amp type is selected.

 Tips on Creating Sound

Using the [GAIN] knob y and [MASTER] knob u in combination gives you broad control over the sound for

each amp type, except ACO and FLAT. Setting the [GAIN] knob and [MASTER] knob properly provides the

desired amount of distortion on the power amp. Once you have the desired sound, use the [GUITAR] knob !3

to set the overall volume of the guitar sound.

t [AMP] switch (THR30II Wireless only)

Selects the amp mode. Selects the amp modeling by combination of amp mode and amp type. The [AMP]

knob r lamp lights for the corresponding amp mode color.

For further details of amp modeling settings that can be selected by combining the amp mode and amp type,

refer to the Amp Modeling List (page 19)

y [GAIN] knob

Adjusts the amount of guitar distortion. Turn the knob to the right to increase the amount of distortion.

* When ACO is selected with the [AMP] knob r, the modeled sound is a mixture of the front-mic’d sound and pickup sound

of an acoustic electric guitar. (Minimum setting produces the direct pickup sound only. Maximum setting produces the mic

sound only.)

u [MASTER] knob

Adjusts the volume for the guitar sound. Turn the knob to the right to increase the volume and create power

amp distortion and change in the low-range frequency.

* When BASS, ACO or FLAT is selected with the [AMP] knob r, this only adjusts the volume.

i [BASS] knob

Tone adjustment for the guitar’s sound. Turn the knob to the right to enhance the low-range frequencies.

o [MIDDLE] knob

Tone adjustment for the guitar’s sound. Turn the knob to the right to enhance the mid-range frequencies.

!0 [TREBLE] knob

Tone adjustment for the guitar’s sound. Turn the knob to the right to enhance the high-range frequencies.

!1 [EFFECT] knob

Selects one of four different effects: CHORUS, FLANGER, PHASER, or TREMOLO. Turn the knob to the right

to increase the amount of each effect.

* Turn the knob fully to the left to set the effect OFF.

THR30II Wireless THR10II Wireless THR10II Reference Manual 5

Names and Functions

!2 [ECHO /REV] knob

Selects one of four different effects: ECHO (tape echo), ECHO/REV (tape echo/reverb), SPRING (spring

reverb), and HALL (hall reverb).

Turn the knob to the right to increase the amount of each effect.

* Turn the knob fully to the left to set the effect OFF.

* When ECHO or ECHO/REV is selected, the [TAP/TUNER] button

e can be used to set the delay time.

!3 [GUITAR] knob

Adjusts the overall volume of the guitar sound.

* This knob’s setting has no effect on the signal sent to the [USB] jack @0.

* The volume output to the [LINE OUT] [L] [R] jack (THR30II Wireless only) is constant regardless of the setting of the [GUI-

TAR] knob.

!4 [AUDIO] knob

Adjusts the audio playback volume for audio from the computer connected to the [USB] jack @0, an audio

device connected to the [AUX] jack !7, or a smart device connected by Bluetooth (page 10).

!5 [INPUT] jack

This is a standard phone jack used to connect a guitar to the THR-II.

* Connecting the Relay G10T to the [INPUT] jack starts charging that device automatically. (THR-II Wireless only)

* The optimal channel is set automatically by connecting the Relay G10T to the [INPUT] jack for at least 10 seconds. (THR-II

Wireless only)

!6 [PHONES] jack

This is a stereo mini phone jack used to connect stereo headphones to the THR-II.

* Speaker sound is muted when a plug is inserted into the [PHONES] jack.

!7 [AUX] jack

This is a stereo mini phone jack used to connect an external audio device to the THR-II.

* The signal received at the [AUX] jack is not sent to the [USB] jack @0.

!8 [USER MEMORY] [1] [2] [3] [4] [5] button

Saves up to five sets of amp section controller settings (GAIN, MASTER, BASS, MIDDLE, TREBLE, EFFECT,

ECHO/REV).

Press and hold the number of the desired [USER MEMORY] button for saving your settings to (about 2 seconds).

The save operation is complete when the memory number for the button being pushed appears in the

LED Display

. Press one of the numbered buttons (less than 2 seconds) to recall the saved settings.

* On the THR10II Wireless and THR10II, enable Bluetooth by pressing the [USER MEMORY] button [4] and [5] simultane-

ously.(Same as [Bluetooth] button

!9)

!9 [Bluetooth]button (THR30II Wireless only)

Set the Bluetooth. Hold the Bluetooth button (for more than three seconds) to switch the pairing mode (the

LED Display w flashes in green).

For further details of Bluetooth connecting, refer to the Connecting to a smart device. (page 10)

THR30II Wireless THR10II Wireless THR10II Reference Manual 6

Names and Functions

Rear Panel

@0 [LINE OUT] [L] [R] jack (THR30II Wireless only)

These are standard phone jacks used to output line level audio signals.

For connection to external devices with line level signals.These jacks can be connected to phone-type (bal-

anced/unbalanced) plugs.

@1 [USB] jack

This jack is used to connect THR-II to a computer via a USB cable.

@2 [15V] DC IN connector

Connects the supplied power adaptor.

About the Default Settings

To reset all contents stored in the user memory, switch on the power while holding down [USER MEM-

ORY] buttons [1], [3], and [5].

NOTICE

All contents stored in the user memory will return to factory defaults when the unit is initialized.

Hold down switches [1], [3], and [5].

Switch on the power.

THR30II Wireless THR10II Wireless THR10II Reference Manual 7

The THR-II can be used either with a conventional wired connection with an appropriate cable, or with a wireless

connection.

Connection Example (on THR30II Wireless)

• Make sure that all devices to be connected to the unit by cable are turned off.

• When connecting the unit to an external device, check the shape of the jack and use an appropriate

cable that matches with the jack’s specifications and connect it securely.

Precautions for using the USB jack

Make sure to follow the points at next page when connecting a computer to the THR-II USB jack, to avoid loss

of data by the computer and prevent the THR-II from freezing or shutting down.

Connection

* The illustrations and LCD screens as shown in this manual are for instructional purposes only,

and may appear somewhat different from those on your instrument.

NOTE

When using both cable and wireless

connection simultaneously, the cable

connection outputs sounds.

• Playing music/audio

NOTE

Make sure to adjust the device’s level

appropriately to avoid distortion.

• Wireless tone editing with the iOS/

Android app (THR Remote).

• Wireless control with a third-party

Bluetooth footswitch (via THR

Remote).

Wireless

Connection

Audio output from

an audio player or

computer

Computer, Tablets and Smartphones

USB Cable

Power Adaptor

LED display

When connecting Blue-

tooth, check LED light-

ing in this area.

• Order for turning the power on

THR30II Wireless → Mixer → Amp (or powered speaker)

• Order for turning the power off

Amp (or powered speaker) → Mixer → THR30II Wireless

External Audio Devices

Power

Outlet

Bluetooth

THR30II Wireless THR10II Wireless THR10II Reference Manual 8

Connection

NOTICE

• Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.

• Be sure to wake the computer from suspended/sleep/standby mode before connecting a computer

to the USB jack.

• Always quit all applications that are running on the computer before connecting or disconnecting

the USB cable and set the volume output on the computer to its minimum level.

• When connecting or disconnecting the USB cable, be sure to set the OUTPUT controls ([GUITAR]

knob and [AUDIO] knob) on the THR-II to their minimum levels.

• Wait at least 6 seconds between connecting or disconnecting the USB cable.

Power

The THR-II Wireless can operate on either DC power (via the power adaptor) or with the built‐in rechargeable

battery. The THR10II can operate on DC power (via the power adaptor).

* When you use THR-II Wireless with the built-in rechargeable battery, the output sound may become small. (page 16)

 When using the power adaptor

Connect the supplied power cord to the power adapter. Connect the supplied power adaptor to the [15V] DC IN

jack located on the rear panel of the THR-II. Connect the AC plug to a power outlet.

* Follow the bundled Safety Instruction Sheet before making connections.

 Turning the power on and off

Press the [ ] power button on the top of THR-II for one second to turn the power on. The LED of the power

button lights when turning the power button on. The LED of the THR-II Wireless lights in green while charging.

Otherwise, it lights in red.

* Follow the bundled Safety Instruction Sheet before making connections.

 Checking the battery level

Press the [ ] power button on the top of the THR-II for less than one second to check the battery level. The

remaining battery capacity is displayed in four levels of 3, 2, 1 and L (Low).

Power Adaptor

(supplied)

Power Outlet

DC IN Jack

DC plug

the supplied power cord

Battery full No battery remaining

THR30II Wireless THR10II Wireless THR10II Reference Manual 9

Connection

 Charging to the built‐in rechargeable battery (THR-II Wireless only)

Connect the supplied power adaptor to the DC IN jack located on the rear side of the THR-II Wireless. The LED

of the power button lights in green while charging.

* For further details of the Power Button LED state, refer to the THR30II Wireless, THR10II Wireless* Power Button LED status

list (page 17).

NOTE

• When you use the THR-II Wireless in an environment of extreme temperatures, charging may not be

possible.

 Charging the Relay G10T (THR-II Wireless only)

Connect the Relay G10T to the [INPUT] jack located on the top of the THR-II Wireless. The built‐in rechargeable

battery starts charging automatically.

* When you resume charging after pulling out the Relay G10T from the INPUT jack of the THR-II Wireless, connect the Relay

G10T to the INPUT jack after more than 2 seconds.

* If the supplied power adapter is not connected to the THR-II Wireless, charging of the Relay G10T will not start.

* Refer to the manual of Relay G10T for the meaning of LED display indications on the Relay G10T.

NOTE

• After charging, unplug the Relay G10T from the THR-II Wireless.

• When the THR-II Wireless is turned off and the power adapter is connected, the Relay G10T is

charged by simply connecting. However, the THR-II Wireless is initially set to turn off the power

when the Relay G10T charging is finished. In this state, leaving the Relay G10T connected to the

THR-II Wireless may result in discharge of the Relay G10T's battery.

• You can release the setting that turn off the power of the THR-II Wireless automatically, after the

Relay G10T is charged, with the THR Remote.

Connecting to guitar by wireless (THR-II Wireless only)

The THR-II Wireless can connect with the Relay G10T wireless guitar transmitter (made by LINE6) by wireless.

Moreover, the optimal channel is set automatically by connecting the Relay G10T to the [INPUT] jack located on

the top of the THR-II Wireless for at least 10 seconds. For details on wireless connection, refer to the Relay

G10T’s manual.

THR30II Wireless THR10II Wireless THR10II Reference Manual 10

Connection

Connecting to a smart device

By connecting a smart device to the THR-II, you can:

• Play audio files on a smart device via Bluetooth.

• Edit effects and tone controls on a smart device.

 Playing audio files on a smart device via Bluetooth

To play audio from a smart device via Bluetooth, configure Bluetooth on the smart device while in the pairing

mode.

 Setting the THR-II to pairing mode

1. Check that the at the top of the LED DISPLAY is unlit (disconnected).

2. Press and hold the [Bluetooth] button* located on the top of the THR-II for three seconds.

3. Check that the LED DISPLAY flashes in green (pairing mode).

 Configuring Bluetooth on the smart device

4. Complete the Bluetooth configuration of the smart device within 3 minutes after entering pairing mode.

* For details on Bluetooth configuration, refer to the manual of your smart device.

5. Check that the LED DISPLAY is lightning in green (connected).

Confirm sound output from the THR-II by playing music on the smart device.

NOTE

• After turn off the THR-II, and when turn on the power and the Bluetooth connection record remains

on both the THR-II and the smart device, reconnect the Bluetooth automatically.

Playing an audio on

the smart device.

5. Check that the LED

is lit in green

(connected).

4. Complete the Blu-

etooth configura-

tion within 3

minutes.

3. Check that the LED flashes in

green (pairing mode).

1.Unlit

(disconnected)

2. Press and hold the

Bluetooth button* for

three seconds (pairing).

On the THR10II Wireless and THR10II,

enable Bluetooth by pressing the [USER

MEMORY] button [4] and [5] simultane-

ously.

Press the Bluetooth

button* once

then disconnected.

(reconnect)

Press the Bluetooth

button*.

(disconnect)

THR30II Wireless THR10II Wireless THR10II Reference Manual 11

Connection

 Editing effects and tone controls on a smart device

Install the THR Remote app to the smart device to allow editing of effects and tone controls on that device.

 Installing THR Remote (Android, iOS)

1. Access the app distribution service on the smart device.

Android devices: Google Play*

iOS devices: App Store

2. Search for the THR Remote app.

3. Download and install the THR Remote app following the onscreen instructions.

 Configuring Bluetooth MIDI

1. Start the THR Remote.

2. Touch the Bluetooth icon on the display.

3. Connect to LE_THRII following the onscreen instructions.

 Starting the THR Remote app

Start the THR Remote app on the smart device.

Press the desired [USER MEMORY] button for 2 seconds to save the settings made with THR Remote to the

THR-II’s built-in user memory (page 5).

• For connecting general android devices, refer to the Smart Device Connection Manual for Android.

For connecting general iOS devices, refer to the iPhone/iPad Connection Manual.

Yamaha Downloads. https://download.yamaha.com/

* Google Play and the Google Play logo are trademarks of Google LLC.

THR30II Wireless THR10II Wireless THR10II Reference Manual 12

Connection

Connecting to a computer

Connecting a computer to the THR-II makes the following possible:

• Outputting audio files played on the computer with the THR-II.

• Record with Cubase AI.

• Edit effects and tone controls on the computer.

 Outputting audio files played on the computer with the THR-II

 Configuring and Operating

Select the model name (THR30II WIRELESS, THR10II WIRELESS, THR10II) of the connected THR-II as the

computer’s audio output setting.

Windows

Control Panel → Sound → “Sound” tab

Macintosh

System Preferences → Sound → “Output” tab

Connect the computer’s USB connector to the USB connector on the THR-II as shown in the diagram below.

You can play a guitar along to the audio played on the computer.

Use the [AUDIO] knob to adjust volume of the audio played on acomputer.

USB Connection diagram

[AUDIO] knob

Playback an

audio file on the

computer.

Guitar sound

audio playback

[USB] jack

THR30II Wireless THR10II Wireless THR10II Reference Manual 13

Connection

 Recording with Cubase AI

 Installing Cubase AI

A download access code for Cubase AI music production software is included in the THR-II. Using Cubase AI

enables you to record a guitar connected to the THR-II and edit songs.

Cubase AI System Requirements

For the latest information, refer to the Steinberg website below.

https://www.steinberg.net/

Installing Cubase AI

To install Cubase AI, an active Internet connection is required. Follow the instructions provided in the “Cubase

AI Download Information” sheet to download, install and activate the software.

 Connecting to the THR-II

Connect the computer’s USB connector to the USB connector on the THR-II as shown in the diagram below.

(See the USB Connection diagram on page 12.)

* For more information on operating, refer to the Cubase AI’s Help Menu (see the illustration below).

 Editing effects and tone controls on a computer

 Installing the THR Remote app (Windows, Mac)

1. Access the following website and extract the THR Remote file after downloading.

https://download.yamaha.com/

* Check the above website for information on system requirements.

* The THR Remote may be updated without notice. Check the above website for the latest details and updates.

2. Install the THR Remote app to your computer.

 Configuring and Operating after Installing

Connect the computer’s USB connector to the [USB] connector on the THR-II as shown in the diagram below.

(See the USB Connection diagram on page 12.)

Press the desired [USER MEMORY] button for 2 seconds to save the settings made with THR Remote to the

THR-II’s built-in user memory (page 5).

to the [USB] jack

on THR-II

Help

THR30II Wireless THR10II Wireless THR10II Reference Manual 14

No power

• Connect the power adaptor properly (see page 8).

• Make sure that the THR-II Wireless been prop-

erly charged, when the power adapter is discon-

nected (see page 8).

No sound

No guitar sound is output (wired connection)

• Connect the guitar to [INPUT] jack properly (see

page 7).

• Make sure that the volume control on the guitar

is turned up properly.

• Make sure that the [GAIN] knob, [MASTER]

knob and [GUITAR] knob are not set to mini-

mum (see pages 4, 5).

• When the [AMP] knob is set to CLEAN, make

sure that all of the [BASS] knob, [MIDDLE] knob

and [TREBLE] knobs are not set to minimum

(see page 4).

• Don’t connect the headphones to [PHONES]

jack to outputs from the speaker on THR-II (see

page 5).

• Make sure that the COMPRESSOR Level is not

set to 0 on the THR Remote app (see pages 11,

13).

• Set the Tuner function OFF (see page 3).

• Make sure that the cable connecting the guitar

is not damaged.

No guitar sound is output (wireless con-

nection)

• Use the Relay G10T. THR-II Wireless cannot

connect to any guitar wireless transmitter other

than the Relay G10T.

• Connect the Relay G10T to the INPUT jack

located on the top of the THR-II Wireless for at

least 10 seconds. The appropriate channel is

set automatically.

• Make sure that the volume control on the guitar

is turned up.

• Set the Tuner function OFF (see page 3).

No audio sound is output by Bluetooth

• Confirm the status of LED display. When the

LED is unlit or flashing in green, the devices are

not connected via Bluetooth (see page 17).

• When the Bluetooth configuration on the smart

device is ON, turn it OFF once and configure

"Playing audio files on a smart device via Blue-

tooth" (see page 10).

• Delete the Bluetooth registration once on the

Bluetooth configuration screen on the smart

device and configure "Playing audio files on a

smart device via Bluetooth" (see page 10).

• Move the smart device and the THR-II closer

together.

• Turn off the power of the THR-II. (see page 8)

• Restart the smart device.

* For details on Bluetooth configuration, refer to the

manual of the smart device.

• Disconnect any other Wi-Fi and Bluetooth

devices. The connection may be broken due to

the influence of other nearby Wi-Fi or Bluetooth

devices.

No audio sound is output from a computer

by USB connection

• Connect the USB cable properly (see page 12).

• Confirm the configuration of the audio output

port on the computer (see page 12).

• Confirm the configuration of the computer on

the computer or that audio is not muted on the

application.

• Make sure the [AUDIO] knob is turned up (see

page 5).

• Make sure the USB cable connecting the

devices is not damaged.

No audio sound is output from an external

device by AUX connection

• Connect the cable to the external device prop-

erly (see page 7).

• Make sure that the volume control on the exter-

nal device is turned up.

• Make sure the [AUDIO] knob is turned up (see

page 5).

• Make sure the cable connecting the devices is

not damaged.

Troubleshooting

THR30II Wireless THR10II Wireless THR10II Reference Manual 15

Others

Tap Tempo cannot be set

• Select ECHO or ECHO/REV. The tap tempo can-

not be set with SPRING or HALL (see page 4).

A “#” appears in the LED display

• When Extended Stereo is set to OFF, a “#”

appears in the LED display (see page 4).

THR-II Wireless cannot be charged

• Keep the THR-II Wireless at room temperature

and don’t use it until the built-in rechargeable

battery reaches a suitable temperature. If charg-

ing cannot be performed after a sufficient time,

there may be a problem with the built-in

rechargeable battery. If the problem persists,

consult your Yamaha dealer (see page 17).

Relay G10T cannot be charged

• When Relay G10T is disconnected from the

[INPUT] jack, connect to the [INPUT] jack on

THR-II Wireless again after 2 seconds.

Volume is low

• Keep the THR-II Wireless at room temperature

and don’t use it until the built-in rechargeable

battery reaches a suitable temperature.

For safety reasons, the built-in rechargeable

battery is designed to limit the volume when the

built-in rechargeable battery's temperature rises.

The built-in rechargeable battery charge

does not last

• THR-II Wireless's built-in rechargeable battery

may have reached the end of its life. If the prob-

lem persists, consult your Yamaha dealer.

• Charge the battery every six months to maintain

the battery power function.

• The built-in rechargeable battery has a limited life-

time. The capacity decreases gradually with the

number of times of use and the passage of time.

• The lifetime of the built-in rechargeable battery

depends on the storage method, usage and envi-

ronment.

THR30II Wireless THR10II Wireless THR10II Reference Manual 16

Technical Specifications

Digital Section

Built-in Amp Simulations

CLEAN, CRUNCH, LEAD, HI GAIN, SPECIAL, BASS,

ACO

*, FLAT

There is an amp mode MODERN, BOUTIQUE, and

CLASSIC for each amp type (THR10II Wireless and

THR10II can switch the amp mode by THR Remote)

* Mic simulation

Built-in Effects

• CHORUS, FLANGER, PHASER, TREMOLO

• ECHO, ECHO/REVERB, SPRING REVERB, HALL

REVERB

In addition to the above, THR Remote can choose

two types of reverve Room and Plate.

• COMPRESSOR

• NOISE GATE*

Can be choose by THR Remote.

Built-in Chromatic Auto Tuner

Knob/Switch

AMP, GAIN, MASTER, BASS, MIDDLE, TREBLE,

EFFECT, ECHO/REV, GUITAR, AUDIO, USER MEM-

ORY button x 5, TAP/TUNER button, Amp switch*,

Bluetooth button*

* Only THR30II Wireless

Display

LED × 1

Connections

INPUT (Standard Monaural Phone Jack, Unbalanced),

LINE OUT (Standard Jack, Balanced/Unbalanced),

PHONES (Stereo Mini Jack),

AUX (Stereo Mini Jack),

USB TYPE B,

DC IN (15V)

A/D Converter

24-bit + 3 Bit Floating

D/A Converter

24-bit

Sampling Frequency

48 kHz

Memory Allocations

User Memory: 5

Input Level

GUITAR IN : -10 dBu

AUX IN : -10 dBu

PHONES Output Level

10 mW

Rated Output

THR30II Wireless: 30 W (15 W + 15 W)

THR10II Wireless, THR10II: 20 W (10 W + 10 W)

Maximum output during built-in recharge-

able battery operation

THR30II Wireless, THR10II Wireless:

15 W (7.5W + 7.5W)

Power Source

Power Adaptor or built-in rechargeable battery

Power Adaptor (YNT345-1530)

Built-in rechargeable battery

Continuous driving time*: About 5 hours

* Depends on usage situation

Power Consumption

THR30II Wireless, THR10II Wireless: 22 W

THR10II: 11 W

Dimensions (W x H x D)

THR30II Wireless:

420 x 195 x 155 mm (16.5” × 7.7” × 6.1”)

THR10II Wireless, THR10II:

368 x 183 x 140 mm (14.5” × 7.2” × 5.5”)

Weight

THR30II Wireless: 4.3 kg (9 lbs. 8 oz.)

THR10II Wireless: 3.2 kg (7 lbs)

THR10II: 3.0 kg (6 lbs. 1 oz.)

Accessories

• Power Adaptor (YNT345-1530)

• Quick Guide

• Safety Instructions Sheet

• Service offices list

• Cubase AI Download Information

Bluetooth

Bluetooth Version: Bluetooth Ver. 4.2

Supported Profile: A2DP

Compatible Codec: SBC

RF Outout Power: Bluetooth class 2

Maximum Communication Range: 10m (33ft) (without

obstacles)

* The contents of this manual apply to the latest

specifications as of the publishing date. To

obtain the latest manual, access the Yamaha

website then download the manual file. Since

specifications, equipment or separately sold

accessories may not be the same in every locale,

please check with your Yamaha dealer.

Specifications

THR30II Wireless THR10II Wireless THR10II Reference Manual 17

Specifications

THR30II Wireless, THR10II Wireless* Power Button LED status list

* Since the THR-10II does not have a built-in rechargeable battery, the power button LED status is

only red (ON) and off (OFF).

 When not using the power adaptor

The power is ON

The power is OFF

 When using the power adaptor

Under charging

The battery is full and the power is ON

The battery is full and the power is OFF

Red

Unlit

Red

Unlit

Charging error indication

When the power is on Indicates charging error

When the power is off Indicates charging error

If the built-in rechargeable battery has a charging error, immediately turn off the THR-II Wireless power,

unplug the power adapter, and consult your Yamaha dealer.

Flashes

(green  red)

Flashes

(green  unlit)

THR30II Wireless THR10II Wireless THR10II Reference Manual 18

Specifications

Signal Flow Diagrams

Guitar In

Extended Stereo

Bluetooth In

USB In

Speakers &

Headphones Out

USB Out

Line Out

Wet

GUITAR

Knob

Sync

Compressor

(FX1)

Speaker

Simulator



Simulator



(FX2)

Delay

(FX3)

AUX In

Reverb

(FX4)

AUDIO

Knob

USB

Dry

Output gain

App. control

Noise

Gate

Mix gain

App. control

Sync

Direct

Switch

THR30II Only



Variable gain

THR30II Wireless THR10II Wireless THR10II Reference Manual 19

Specifications

Amp Modeling List

Mode Amp Type Description

Classic

Clean

A low-gain preamp for sparkling American-style cleans, with 6L6 tubes in the output stage

for brightness and a strong midrange.

Crunch

EL84 power tubes in a true Class-A configuration with a highly responsive EQ for rich,

complex harmonic tones and warm overdrive. Inspired by British chime.

Lead

A low-gain preamp with an EL34-based power section that breaks into classic British over-

drive as the master volume is pushed.

Hi Gain

Powerful modern distortion that fills out as the high-gain preamp is pushed. Tread carefully

after 12 o'clock.

Special

12AX7 and 6L6 tubes in pursuit of the "Brown" sound. Set the gain around 11 o'clock for

classic rock crunch, or crank it for saturated rhythm tones.

Bass Woody, vintage tone with late breakup.

Acoustic

Designed for acoustic-electric guitar, modeling the response of a boutique condenser

microphone.

Flat

A neutral tone with no amp or speaker modeling. Great for connecting other instruments to

your THR.

Boutique

Clean

A low-watt EL34 design. Turning up the preamp gain will thicken up the cleans, then push

into bluesy overdrive.

Crunch

A deceptively simple amp circuit with just a single 12AX7 and EL84. A full, no-frills tone

that is highly responsive to picking dynamics.

Lead

A version of the Classic/Lead circuit, modified for extra gain with a darker tone and

scooped mids.

Hi Gain

ECC83s into 6L6s for high gain with a highly responsive EQ, inspired by German engineer-

ing.

Special

Four 12AX7 preamp tubes into 6L6 output tubes. Tight, fast tracking for crushing high-

gain.

Bass Full, modern tone that breaks into a fuzz-like overdrive when pushed hard.

Acoustic

Designed for acoustic-electric guitar, modeling the response of a boutique tube micro-

phone.

Flat

A neutral tone with no amp or speaker modeling, and a slight bass boost. Great for con-

necting other instruments to your THR.

Modern

Clean

A boutique, low-watt EL84 design that adds fullness and sustain as the master volume is

turned up. A great match for neck pickups.

Crunch

A mid-volume boutique design with 6550 power tubes. Listen for tight bass response and a

singing sustain.

Lead

A high-gain design with 12AX7s into EL34s, for the tone that defined 1980s hard rock and

heavy metal.

Hi Gain

A boosted version of the Classic/Special amp, with even more gain for aggressive rhythms

or searing leads.

Special

A classic overdrive circuit before the preamp tightens low-frequency response and provides

even more gain. Ideal for extended-range guitars.

Bass Vintage voicing with early breakup for overdrive that works well with bass or guitar.

Acoustic

Designed for acoustic-electric guitar, modeling the response of a boutique dynamic micro-

phone.

Flat

A neutral tone with no amp or speaker modeling, and a slight mid scoop. Great for con-

necting other instruments to your THR.

THR30II Wireless THR10II Wireless THR10II Reference Manual 20

Manual Development Department

Published 09/2019 PO-A0

Yamaha THR10II Wireless Manual de usuario

Marca: Yamaha

Modelo: THR10II Wireless

Tipo: Manual de usuario

Este manual también es adecuado para

Descargar PDF

informe

Yamaha THR10II Wireless Manual de usuario

Este manual también es adecuado para

Yamaha THR10II Wireless Manual de usuario

Documentos relacionados

Otros documentos