BEFORE OPENING THE PACKAGE, READ ALL
WARNING LABELS AND DATA SHEETS.
FOLLOW ALL PRECAUTIONS.
KEEP OUT OF REACH OF CHILDREN AND
ANIMALS
DO NOT TAKE INTERNALLY
FIRST AID:
INHALATION: MILD BRONCHIAL IRRITATION
MAY OCCUR. INGESTION: LARGE QUANTITIES
MAY CAUSE IRRITATION TO MOUTH, THROAT
AND GASTROINTESTINAL TRACT RESULTING
IN NAUSEA AND VOMITING.
EMERGENCY TELEPHONE: 1-800-424-9300
SAFETY INFORMATION
ANTES DE ABRIR EL ENVASE, LEA TODAS LAS ETIQUETAS
DE ADVERTENCIA Y LAS FICHAS TÉCNICAS. TOME TODAS LAS
PRECAUCIONES.
MANTENGA EL PRODUCTO FUERA DEL ALCANCE DE LOS
NIÑOS Y DE LOS ANIMALES NO LO INGIERA
PRIMEROS AUXILIOS:
INHALACIÓN: SE PUEDE PRODUCIR UNA IRRITACIÓN
BRONQUIAL LEVE. INGESTIÓN: LA INGESTIÓN DE GRANDES
CANTIDADES DEL PRODUCTO PUEDE CAUSAR IRRITACIÓN DE
LA BOCA, DE LA GARGANTA Y DEL TRACTO GASTRO-
INSTESTINAL, LO QUE, A SU VEZ, PUEDE PROVOCAR
NÁUSEAS Y VÓMITOS. EN CASO DE INGESTIÓN, BEBA AGUA Y
OBTENGA ATENCIÓN MÉDICA. NO INDUZCA EL VÓMITO.
TELÉFONO DE EMERGENCIA: 1-800-424-9300
INFORMACIÓN DE SEGURIDAD
DOMINO 322763
SATISFACTION GUARANTEED
If you are dissatisfied with this product, contact Rust-Oleum Product Support at 1-866-765-4474 for a
product replacement or a full refund of the purchase price. Refer to product number and batch code.
PROJECT DETAILS
BEST FOR
HEAVY COVERAGE
PARTIAL COVERAGE
CLEAR TOPCOAT
Commercial Areas, Workshops,
Garages, Basements
500 Sq. Ft. per box
1000 Sq. Ft. per box
RockSolid
®
Professional Clear Topcoat
is required over heavy decorative
chip coverage
>
>
>
>
Create the attractive look of granite or terrazzo by using this special blend of
RockSolid Professional Decorative Chips. This application is the ideal
choice where a decorative yet highly durable surface is required.
HEAVY PARTIAL
Domino Decorative Chips shown above with partial and heavy
broadcast over RockSolid Professional Industrial Floor coating in Dark Gray
DIRECTIONS FOR USE
Working in sections, apply RockSolid Professional Industrial Floor Coating and toss
RockSolid Professional Decorative Chips onto the wet coating after each section.
IMPORTANT: When tossing decorative chips, leave a 6˝– 12˝ wet edge (without chips).
Apply RockSolid Clear Topcoat (required for Heavy Coverage) after 12 hours and within 7
days of the RockSolid Professional Industrial Floor Coating.
RockSolid Professional Decorative Chips are for use with RockSolid Professional Industrial
Floor Coatings. When broadcast onto a freshly coated surface, these decorative chips
bond to the wet film to become a permanent part of the coating. RockSolid Professional
Decorative chips also help to hide dirt and surface imperfections.
VISIT RUSTOLEUM.COM/ROCKSOLID FOR INSTRUCTIONAL
VIDEOS, FAQS AND TIPS & TECHNIQUES
11 Hawthorn Pkwy., Vernon Hills, IL 60061
800-481-4785 | rustoleum.com/rocksolid
Made in USA | Hecho en E.U.A.
©2017 Rust-Oleum Corporation
323700 0417
0 20066 37102 9