Transcripción de documentos

Natural Sound CD/CDV/LD Player ' L NTSC OWNER’S MANUAL IMPORTANT! CAUTION Please record the serial number of this unit in the space below. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Model : CDV-W901 Serial No. : The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. ÷ Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This unit is designed for your enjoyment in your home. We cannot be liable for the quality of the unit if you use it for business use. So please do not use this unit for business use. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CONTENTS ACCESSORIES .......................................................................... 4 PRECAUTIONS ......................................................................... 5 TYPES OF DISCS WHICH CAN BE PLAYED WITH THIS UNIT ....................................................................... 6 GLOSSARY ............................................................................... 7 CONNECTIONS ......................................................................... 8 NAMES OF PARTS Front panel ......................................................................... 10 Display window .................................................................. 10 Remote control unit ........................................................... 11 BASIC OPERATION (PLAYBACK OF A DISC) ........................ 12 MOVIE DISC ENTERTAINMENT ............................................. 14 SINGING ALONG WITH KARAOKE ENTERTAINMENT .......... 15 APPLIED OPERATIONS .......................................................... 16 QUICK SCANNING OF DISC CONTENTS ............................... 20 RANDOM PLAYBACK (PLAYBACK IN ORDER SELECTED BY THE PLAYER) ................................................. 20 TO SEARCH FOR A DESIRED FRAME ................................... 21 PROGRAMMED PLAYBACK (PLAYING CHAPTERS / TRACKS BY CHANGING THEIR ORDER AS REQUIRED) ....... 22 REPEAT PLAYBACK ................................................................ 23 ON-SCREEN DISPLAY ............................................................ 24 TROUBLESHOOTING ............................................................. 25 SPECIFICATIONS .................................................................... 27 1 ENGLISH s CDV-W901  SAFETY INSTRUCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4 Follow Instructions – All operating and use instructions should be followed. 5 Cleaning – Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Exception: A product that is meant for uninterrupted service and that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6 Attachments – Do not use attachments not recommended by the video product manufacturer as they may cause hazards. 7 Water and Moisture – Do not use this video product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8 Accessories – Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. 9 Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should never be placed near or over a radiator or heat register. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided of the manufacturer's instructions have been adhered to. 10 Power Sources – This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions. 11 Grounding or Polarization – This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternate Warnings – This video product is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a groundingtype power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 12 Power-Cord Protection – Power-Supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 8A An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 13 Lightning – For added protection for this video product receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges. 14 Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 2  extension cords as this can result in a risk of fire or electric shock. 16 Object and Liquid Entry – Never push objects of any kind into this video product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product. 17 Servicing – Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18 Damage Requiring Service – Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b.If liquid has been spilled, or objects have fallen into the video product. c. If the video product has been exposed to rain or water. d.If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. e. If the video product has been dropped or the cabinet has been damaged. f. When the video product exhibits a distinct change in performance – this indicates a need for service. 19 Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 20 Safety Check – Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often We Want You undetectable until it is too late, YAMAHA LISTENING For A Lifetime and the Electronic Industries Association's Consumer Electronics Group recommend you avoid prolonged exposure to excessive volume levels. FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit "OFF" and "ON", please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/ reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact your local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. 3 ENGLISH 15 Overloading – Do not overload wall outlets and  DANGER The use of optical instrument with this product will increase eye hazard. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION The apparatus is not disconnected from the AC power source so long as it is connected to the wall outlet, even if the apparatus itself is turned off. NOTE: Please check the copyright laws in your country before recording from records, compact discs, radio, etc. Recording of copyrighted material may infringe copyright laws. Laser Diode properties Material: GaAlAs Wavelength: 780 nm ● Emission Duration: Continuous ● Laser Output Power: less than 44.6 µW* * This out-put value measured at a distance 200 mm from the objective lens surface on the optical pick-up block. ANSI Class: Class 1 ● ● CAUTION (FOR CANADA MODEL) TO PREVENT ELECTRIC SHOCK , MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT. ATTENTION (POUR LE MODELE CANADIEN): POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. As the laser beam used in this player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. ● To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only. ● This unit has been designed for use with the NTSC format, which is the television format used in North America and some other areas. Do not use discs or a TV made for other television formats (PAL, SECAM) with this unit. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. ACCESSORIES When unpacking the player, first check to make sure that all of the accessories listed below are supplied. ● ● 4 Remote control unit Size "AAA" (IEC R03) dry cell batteries x 2 ● Video cord (RCA plug Ô RCA plug) Use to connect the player to a TV etc. ● Audio cord (RCA plug × 2 Ô RCA plug × 2) Use to connect the player to a TV etc.  If it becomes necessary to transport or ship this unit in the future, be sure to first remove the disc (if loaded), and retract the disc table to its closed position. Then turn the power off, and, after the “OFF” display goes out on the display, disconnect the power cord. INSTALLING THE PLAYER ÷ Place the player on a stable platform next to the television and stereo system to be used with the player. ÷ Do not place heavy objects such as a television or TV monitor on top of the player. ÷ Do not place the player on top of your TV set or TV monitor. Also, keep the player away from devices such as cassette decks which are sensitive to magnetic fields. DO NOT INSTALL THE PLAYER IN THE FOLLOWING LOCATIONS ÷ ÷ ÷ ÷ ÷ ÷ In a place subject to direct sunlight. In humid or poorly ventilated places. In extremely hot or cold places. In a place subject to vibrations. In a dusty place. In a place subject to soot, steam or heat (in a kitchen, etc.) AVOID SOURCES OF HEAT Do not put the player on sources of heat, such as an amplifier. When installing with audio components on a rack, avoid components that generate heat, by placing the player below such components where there is adequate ventilation and not much dust. Avoid placing the player on surfaces such as shaggy carpets, beds, and sofas which may block ventilation under the player and cause damage. CAUTION Even when the player is in the pause mode, the disc-drive motor is still revolving. Since leaving the player in this condition can shorten the lifetime of the motor, do not leave the player in the pause mode for long periods of time. Also, to prevent the damage to the screen, do not use the unit for long periods of time under conditions in which the screen display (monitor) continuously displays characters (for example, power-ON mode, CD PLAY, PAUSE or DEMO mode). With LD discs, if playback is paused for about 20 minutes, the player will automatically enter stop mode. STRIPE PATTERNS APPEARING ON A TV PROGRAM Stripe patterns may appear during a TV program if the player unit is turned on, depending on the quality of reception of the TV station. This is neither a malfunction of the television nor the player. If stripes appear while watching the TV, or when watching the TV for long periods of time, turn the player off. When FM or AM stations are being received, signal noise may be generated if the player is turned on. Turn off the player when not in use. Also, if there is signal noise when receiving radio stations with an indoor antenna, adjust the position or direction of the antenna. CONDENSATION Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the player’s performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In such cases, change the location of the player. POWER-CORD CAUTION Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such a way that they are not likely to be stepped on. A damaged power cord can cause fire or give you an electrical shock. Check the power cord regularly. When you find it damaged, ask your nearest authorized YAMAHA service center or your dealer for a replacement. CLEANING CARE Use a soft, dry cloth for cleaning. For stubborn dirt, soak the cloth in a weak detergent solution; wring well first and wipe. Use a dry cloth to wipe it dry. Do not use any volatile agents such as benzine or paint thinner, as they may damage the surface of the player. LD/CD lens cleaner The player's pickup lens should not become dirty in normal use, but if for some reason it should malfunction due to soiling, ask your nearest authorized YAMAHA service center. Lens cleaners for LD/CD players are commercially available, but special care should be exercised in their use since some may cause damage to the lens. Abnormal functioning of this unit may be caused by lightning, static electricity, or other external inter-ference. To restore normal operation, unplug the AC power cord and then plug it in again. Only one disc can be loaded at any one time. Loading LaserDisc, Compact Disc, 8 cm Compact Disc or Compact Disc with Video on top of one another may result in a breakdown, or in scratching of the discs. Please only load one disc at a time. This player is to be used exclusively with the NTSC color system. Please use NTSC LaserDiscs only. PAL and SECAM system discs cannot be used with this player. 5 ENGLISH PRECAUTIONS  TYPES OF DISCS WHICH CAN BE PLAYED WITH THIS UNIT This unit is a CD/CDV/LD compatible laserdisc player. ÷ The marks shown in the following table are found on the label or jacket of each disc. This player is capable of playing the 7 types of discs listed below without using an adapter. ÷ To prevent a malfunction, do not use an 8-cm (3 in.) adapter (for CD) or a 20-cm (8 in.) adapter (for LD). Types of playable Diameter/Playable sides discs and their marks Max. playback time CD CD 12 cm (5 in.)/ single-side ' CD single 8 cm (3 in.)/ single-side CDV Æ 74 minutes ** CDV 12 cm (5 in.)/ single-side VSD VIDEO SINGLE DISC VSD LASER DISC LD 12 cm (5 in.) / single-side L * ; * 30 cm (12 in.)/ double-side 20 minutes Digital audio 20 min. Digital audio + Video 5 min. Digital audio + Video LD single ** æ 20 cm (8 in.)/ single-side LD CD , CDV Holding with two hands Hold by two opposite edges of the disc. Holding with one hand Hold by hooking two fingers across the center hole and edge. Do not attach paper. Do not touch the disc surfaces. Never use a cracked or warped disc. To avoid danger, never attempt to play a cracked or deformed disc, or a disc which has been mended using an adhesive agent, etc. Also do not use an analog record spray or static prevention agent for these will crack the laserdisc surface. 5 min. CAV 1 hour CLV 2 hours Care of disc CAV 28 min. CLV 40 min. To maintain high video and audio quality, clean the disc if it gets dirty clean by wiping the disc surface with a soft cloth. When wiping, be sure to move the cloth in straight directions from the center of the disc toward the outer edge. Do not wipe in a circular direction like you do with analog records. CAV 14 min. CLV 20 min. LD 20 cm (8 in.)/ double-side How to hold a disc Wipe along the radii. ÷ There are some discs marked with the L mark instead of the Æ mark. ÷ There are some discs without the æ mark. ÷ Do not use an analog record cleaner, benzine, thinner or static prevention agent. * This is the unified symbol mark of LASERDISC (LaserVision videodisc). LaserDisc players and discs which bear this symbol and use the same television system, are mutually compatible. Storage ** A Digital Audio with Multi Audio Disc (CD VIDEO LD) and a CDV (CD Video CDV) are referred to as CD Video discs. CD Videodiscs are recorded with subcodes, which are the non-audio recordings of TOC (Table of Contents) data such as track numbers, index numbers, etc. However, there are some discs without these marks. After playback, be sure to take out the disc from the player, put the disc in the jacket or case and store it vertically. To prevent the discs from warping, do not store jackets or cases at an angle or stack them horizontally. Also do not store them in a place subject to direct sunlight or under high temperature and humidity. ÷ If a LaserDisc is deformed, place it in the inner bag, put the bag between two flat boards, place a weight of 4 to 5 kg (10 lbs) on the boards and leave them for about a day. This may sometimes reduce the warp or other deformation. Heavy books (4 to 5 kg (10 lbs)) Caution VIDEO CD or cannot be played with this player. The Video CD is a disc holding up to 74 minutes of digital video and audio signals, when recorded in the MPEG format. Flat board LaserDisc Inner bag 6 Flat board  LD terms LD (LaserDisc) Chapter number Just like the numbers assigned to chapters of a book, the LD disc is divided into several chapters and each of them is assigned a chapter number. If the chapter numbers are recorded on the disc, it is possible to perform operations such as the chapter search which quickly searches the desired chapter. ÷ Some LD discs do not contain recorded chapter numbers. LaserDiscs include a standard play disc (CAV) and an extended play disc (CLV) depending on the signal recording formats. Frame number A frame number is assigned to every frame on a CAV disc. This makes possible operations such as the frame search which searches desired images based on their frame numbers. Time number This refers to the elapsed playing time from the beginning of the disc that is recorded on CLV discs as well as on CAV discs with a TOC*1. This allows operations such as the time number search which searches desired images based on their time numbers. CDV/CD terms Track number The CDV or CD disc is divided into several tracks and each of them is assigned a track number. With the CDV disc, the track numbers are recorded across the audio and video parts. This allows operations such as the track search which quickly searches the desired track. TOC (*1) CD and CDV discs contain non-audio information called TOC the (Table Of Contents) at the beginning of the disc. As this name implies, the TOC contains information on the number of tracks and their playing time just like the table of contents of a book. ÷ Some LD discs are not provided with a TOC section. ÷ The LD with TOC and the CDV belong to the same category of "optical video disc systems with digital audio". CAV [Standard Play/CAV] or simply [Standard Play] is indicated on the jacket or label of the disc. CLV [Extended Play/CLV] or simply [Extended Play] is indicated on the jacket or label of the disc. LaserDisc with digital audio This type of disc contains the recording of a digital audio signal in addition to an analog audio signal. It allows you to enjoy the high-quality video of an LD and digital sound at the same time. ¬ or : Multi-audio disc with digital audio This type of disc contains different audio information in digital audio and analog audio. ¬ and MULTI AUDIO or :K The digital and analog audio can be switched over to enjoy different audio information. CDV (Compact Disc with Video) ÷ This CD contains the video part. Among the 25-minute playing time of the CDV, 20 minutes contain a similar digital audio to an ordinary CD (audio part) and the remaining 5 minutes contain a video plus digital audio (video part). CD video system The CD video system is the unified name given to "optical video disc systems with digital audio". The systems belonging to this category include; ÷ CDV disc (CD VIDEO, CDV) ÷ LD with subcode and digital audio ÷ CD/CDV compatible player ÷ CD/CDV/LD compatible player Æ 7 ENGLISH GLOSSARY  CONNECTIONS Connection with a TV set equipped with Video/Audio inputs Connection method (Be sure to plug the cords securely deep into the connectors.) 1 Connect the VIDEO OUT jack of the player to the video input jack of a TV (or a TV monitor). • If the TV set has an S VIDEO input jack, connect it using an S VIDEO cable which is available in audio/video stores. For use of the S VIDEO cable, also read the operating instructions of the TV, 2 Connect the AUDIO OUT jacks of the player to the audio input jacks of the TV. 3 Finally plug the power cord into a household power outlet (which should permanently be supplied with power). • Also read the instruction manual of the TV. 7 ATTENUATOR switch Usually, set this switch to the OFF position. Set to ON when the audio is distorted during karaoke singing. ATTENUATOR OFF ON Usually OFF V Plug into a household power outlet after completing all connections. VIDEO OUT 1 2 1 S-VIDEO OUT AUDIO OUT 2 2/R 1/L OPTICAL DIGITAL OUT 2 AC-3 RF OUT ATTENUATOR OFF Check the positions of the holes of the S VIDEO jack before insertion. ON 1 R Accessory audio cord L S VIDEO S VIDEO plug Commercially-available S VIDEO cable S VIDEO input jack VIDEO OUT V AUDIO L L R R Accessory video cord VIDEO input jack AUDIO input jacks (A/V TV) AC-3 RF OUT terminal: This terminal is intended for use with Dolby* AC-3 (*1) components • With this terminal, you will be able to connect an AC-3 RF input to amplifiers and surround processors, and playback laser discs formatted with Dolby AC-3 (*2). (∗1) Indicated with (For hardware) (∗2) Indicated with (For software) • You cannot playback currently available laser discs, laser disc players, AV amplifiers, etc., with this terminal. • Do not connect this terminals to the audio input terminal of a normal stereo or AV amplifiers. * "Dolby", "AC-3" and the double-D symbol are trademarks of Dolby Laboratories Licensing corporation. 8  Connection of an additional stereo amplifier This connection diagram shows how to connect the audio output to a stereo amplifier while the video output is connected to a TV as shown on page 8.To reproduce the audio of a Compact Disc or an LaserDisc with improved quality, it is recommended to connect the player to a stereo amplifier. Connect the AUDIO OUT jacks to the input jacks labeled LD, CD or AUX, etc. (Never connect to the PHONO input jacks.) • Also read the operating instructions of your stereo amplifier. Plug into a household power outlet after completing all connections. Commercially-available optical cable Accessory audio cord Stereo amplifier INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT 1 1 Open the battery compartment cover on the back of the remote control unit. Press the tab and open the cover in the direction of the arrow. 2 Take out the two accessory size "AAA" (IEC R03) dry cell batteries, and insert them into the battery compartment in accordance with the display (ª, ·) inside the compartment. 3 Close the cover of the battery compartment. Incorrect use of batteries may cause leakage or rupture. Always be sure to follow these guidelines: A. Always insert batteries into the battery compartment correctly matching the positive ª an negative · polarities, as shown by the display inside the compartment. B. Never mix new and used batteries. C. Batteries of the same size may have different voltages, depending on brand. Do not mix different brands of batteries. 2 3 9 ENGLISH CONNECTIONS  NAMES OF PARTS Front Panel P. OPEN/CLOSE button 7: STOP button P. 13 (0 LD) P. 12 4¢: CHAPTER buttons OPEN/CLOSE button P. 17 (0 CD) 1¡: SEARCH buttons P. 12 DISC SIDE A/B P. 17 button P. 12 8: PAUSE button P. 13 indicates the page where the control is explained. LD disc table CD disc table P. 12 P. 12 3: PLAY button SIDE s NATURAL SOUND CD CDV LD PLAYER A CDV-W901 LAST MEMORY OPEN/CLOSE CD B 7 STOP LD 4 1 ' STANDBY QUICK TURN ¢ ¡ 3 PLAY L RF AC-3 OUT P. 12 ONETOUCH KARAOKE 8 PAUSE KEY CONTROL I i DISPLAY BASS OFF EXTENSION ECHO 1 MIC 2 MIC LEVEL 1 2 KARAOKE POWER ° 0 Remote control sensor QUICK TURN button 10 MIC jacks P. 14 P. 14 0 10 ONE-TOUCH KARAOKE button P. 15 P. 11 BASS EXTENSION button P. 14 DISPLAY OFF button 0 ECHO controls P. 15 KEY CONTROL buttons P. 15 POWER button/STANDBY indicator P. 12 10 LAST MEMORY button P. 16 P. 15 MIC VOL controls P. 15 Display window Displays the remaining play time. Displays the channel(s) with audio output(s). Displays the total playing time of one side. Displays the chapter number or track number. Lights when ONE-TOUCH KARAOKE is activated. CHP / TRK TOTAL REMAIN 1/L 2/R ONE-TOUCH KARAOKE Lights when a microphone plug is inserted into the MIC jack. Displays the frame number or elapsed time. ● : Disc table open/close : Play Displays the functions being operated, etc. : Disc table being opened : Disc table being closed : End of LD : Intro Scan : Highlight Scan 10 : Single-side repeat playback : Program repeat playback : Start of playback : Pause : Double-side repeat playback : Random repeat playback : Switching power OFF : LaserDisc : Random playback : Compact Disc : Programmed playback : Compact Disc with Video : 1-chapter (1-track) repeat : Disc not present playback  Remote Control Unit P. 16 AUDIO D/A (Digital/Analog) button POWER button P. 12 KEY CONTROL buttons P. 15 DISPLAY button P. 24 OPEN/CLOSE button P. 12 POWER KEY CONTROL I OPEN/CLOSE AUDIO REPEAT 0 A-B i D/A•CX 1 2 3 C 4 5 6 +10 7 8 9 0 CLEAR DISPLAY PROGRAM PGM(Program) button P. 22 CHP/TM(Chapter/Time) P. 17 button LAST MEMORY button P. 16 RANDOM button P. 20 HILITE/INTRO button 1: SEARCH (Fast reverse) button P. 17 JOG MODE button P. 19 JOG MODE indicator P. 19 P. 21 P. 20 CHP/TIME LAST MEMORY MULTI-SPEED 2 3 RANDOM HILITE /INTRO STILL/STEP w ∑ CHAPTER/SKIP 4 SEARCH PLAY 1 3 JOG MODE SIDE A B ¢ SEARCH ¡ STOP PAUSE 7 8 JOG/SHUTTLE REVERSE 2 3 FORWARD REPEAT A-B buttons P. 23 REPEAT button P. 23 CLEAR button ÷ Press to cancel repeat mode, program mode or random playback or to correct a mistake made with the numeric buttons. Numeric buttons P. 15 STILL/STEP buttons P. 18 MULTI-SPEED buttons P. 18 CHAPTER/SKIP buttons P. 17 ¡: SEARCH (Fast forward) P. 17 button 3: PLAY button P. 12 8: PAUSE button P. 13 7: STOP button P. 13 DISC SIDE A/B buttons P. 12 SHUTTLE ring P. 17 P. 19 JOG dial P. 19 s L Operation of the remote control unit Point the remote control unit toward the remote control sensor on the front panel. The distance between the player and remote control unit should be less than 7 meters (23feet) and the operating angle should be within 30 degrees to the left and right with respect to the remote control sensor. ÷ To prevent a malfunction, avoid the entry of strong light, such as direct sunlight and fluorescent light, into the remote control sensor. s 30° 30° 7 m ft. 23 11 ENGLISH NAMES OF PARTS  BASIC OPERATION (PLAYBACK OF A DISC) ÷ For the connections, refer to pages 8 and 9. 3 Disc placing position The CD/CDV or single-sided LD should be placed with the label side facing up and the double-sided LD should be placed so that the label of the side to be played faces up. Place any disc correctly along the guide groove provided for each size. 2 4 LD disc table : 7 s 4 1 3 ¢ ¡ LD CD single:8 cm (3 in.) 8 CD, CDV, video single:12 cm (5 in.) I i LD, LD single:20 cm (8 in.) 8 c m /3in. C D 12c m /5in . C D / C D V 20c m/8in. L D 1 The buttons with the same name on the front panel and remote control unit have the same functions. ● LD:30 cm (12 in.) 30cm/12in. LD CD disc table : CD CD single:8 cm (3 in.) The STANDBY indicator is lit while the power is OFF. CD, CDV, video single:12 cm (5 in.) 8 cm /3in. C D 1. Press POWER. 12 c Set the TV to the function (input) to which the player is connected. Caution in placing a disc Be careful not to deviate a disc from the guide groove on the disc table, for this will make proper playback impossible and could cause a malfunction such as disc damage. STANDBY POWER POWER Front Panel m /5in . C D / C D V For safety! 2. Press appropriate OPEN/CLOSE to open the disc table. To play an LD ● To play a CD ● LD Be careful not to catch your finger in the disc table when it draws in. Also take care to prevent a small child from opening the disc table cover and inserting their hand inside the player to prevent injury. Do not place an object other than a disc on the disc table. CD Convenient feature (Auto power-ON function) ● 0 Front Panel Front Panel After using a CD, the CD tray opens when you press OPEN/ CLOSE on the remote control unit. To playback an LD, use OPEN/CLOSE on the front panel. ● ● When the power is OFF, pressing OPEN/CLOSE turns on the power automatically and opens the disc table. When you have turned the power OFF with a disc left inside the player, simply press 3 on the front panel; the power turns ON automatically and playback of the disc starts. The above features cannot be operated with the remote control unit. 3. Place a disc on the disc table. To place an LD To place a CD s s Place only one disc, LD or CD, at a time. ● 4. Press 3. ● Playback of the CDV starts with the video part. Front Panel PLAY 3 PLAY 3 Playback by specifying side A or B In this description, side A refers to the surface facing up when the disc is placed on the disc table, and side B refers to the other side. Note that they are not always the same as disc sides A and B as recorded on the disc. It is recommended to place a disc so that the side labeled "SIDE A" faces upward. To play side A only: When the disc with the side labeled "SIDE A" is facing up, press DISC SIDE A without pressing 3. The player will stop after having played side A. To play side B only; Press DISC SIDE B without pressing 3 . The player will stop after having played side B. If the disc has been placed with the recorded "SIDE B" facing up, DISC SIDE A plays side B and DISC SIDE B plays side A. Display when the disc side is switched ● Operations marked with [ control unit. 12 ] are made from the remote Turning from side A to side B B ● Turning from side B to side A A  1, 3 7 2 To stop playback (7) STOP 7 s 4 1 3 7 7 STOP ¢ ¡ 8 I Press 7. i To pause playback temporarily (8) 8 PAUSE 8 PAUSE 8 To stop playback and take out the disc 1. Press OPEN/CLOSE. With LD With CD LD Front Panel CD 0 Front Panel 2. Take out the disc. Notes on playback of the LD single With CD With LD When playing back a one-sided (20 cm) LD single, the player sometimes enters side B mode after playing back side A and then enters stop mode. “U1, F5..., ” appears on the TV and the player’s display but this occurs because there is no signal on side B, not because of a malfunction. s s Press 8. The audio and video disappear and the 8 indicator lights on the display. Pressing 8 again resumes playback from the position where it was paused. ● A still image is displayed during pause with a LD. ● Leaving the player in pause mode for a long period of time may shorten the life of the motor. Therefore, the player automatically enters stop mode when pause mode has lasted for about 20 minutes. (Pause timer) 3. Press OPEN/CLOSE to close the disc table. With LD With CD LD Front Panel CD 0 Front Panel 13 ENGLISH BASIC OPERATION (PLAYBACK OF A DISC)  MOVIE DISC ENTERTAINMENT The on-screen display can be defeated to enhance the ambience of movie entertainment. In addition, the Quick-Turn function reduces the time required before starting playback or changing disc side and the Bass Extension function which allows selection of the audio response of each movie are also provided. To select the audio that matches the ambience of the movie (BASS EXTENSION) The indicator lights when the bass extension function is on. BASS EXTENSION To turn off the display Press DISPLAY OFF. Press repeatedly DISPLAY OFF The indicator lights. The bass sound is adjusted every time BASS EXTENSION is pressed. Set the button to the desired position according to the atmosphere of the movie you are watching. ∞ ÷ The display window as well as the on-screen display turns off. However, when a button on the player or remote control unit is pressed, the operation mode is displayed for about 1.5 seconds. ÷ The TV screen color while the disc is turned or stopped changes from a blue background to a black background. Off : Original audio ∞ Once LEVEL-1: Bass is enhanced ∞ Twice LEVEL-2: Bass is enhanced more than LEVEL-1 NOTE : When DISPLAY OFF is pressed, the display window turns off even while the power is ON. The display OFF state is held in memory even after the power is switched off so the display window is off when the power is switched on later. To turn on the display window, press DISPLAY OFF again. ∞ Three times LEVEL-3: Bass is enhanced more than LEVEL-2 To reduce the playback start time and turn time (QUICK-TURN) The level is displayed on the top right of the screen. The indicator lights when the quick-turn function is on. BASS LEVEL-1 QUICK TURN ÷ Press QUICK TURN to turn this function off. ÷ When the quick-turn is on, the TOC recorded on the disc is not read so the time required before starting playback or turning the disc can be reduced. As a result, even when the LD being played contains TOC information, the random playback, total time display, remaining time display and the elapsed time display of CAV (standard play) disc will not function. NOTES : ÷ When the AC cord is plugged into a power outlet and the power of the player is switched on, the quick-turn is automatically turned on and the indicator lights. ÷ The quick-turn is turned off automatically when a CD is inside the player. If an LD is placed in it, the previous state is recalled from the memory and the quick-turn is turned on again. ÷ The quick-turn on or off state is held in memory even after the power is switched off so the same state is recalled when the power is switched on later. 14 NOTES: ÷ Turning on bass extension may distort the dialog portion of a sound track when used with certain discs or system configurations. If this occurs, either turn down the bass extension level or turn bass extension off. ÷ The bass extension is turned off automatically with a CD inside the player. If an LD placed in it, the previous state is recalled from the memory and the bass extension is turned on again. ÷ The bass extension on or off state is held in memory even after the power is switched off so the same state is recalled when the power is switched on later. ÷ The bass extension function is switched off automatically when the microphone is plugged in. The bass extension is switched back on as soon as the microphone is unplugged. ÷ The bass extension function is switched off automatically when One-Touch Karaoke is switched on. In this case, return to the bass extension does not occur.  B:To set a desired pitch (Key control function) A B 2 3 B 4 1 1. Insert the microphone plug(s) into the MIC jack(s). ● KEY CONTROL I i KEY CONTROL I i # : Pitch is heightened each time this button is pressed (up to 5 steps from normal). I : Pitch is lowered each time this button is pressed (up to 5 steps below normal). ● The current pitch position is shown by the lit indicator. ● The key control is possible only while a microphone is plugged in. The KARAOKE indicator lights on the display. 1 MIC 2 The karaoke audio varies as shown below according to the type of disc. CD , CDV 2. Select music with the numeric buttons on the remote control unit. To select No. 10 or beyond: Use the +10 and 0 buttons. (Examples) 17: +10 , 7 20: +10 , +10 , 0 Multiplexed audio disc Stereo audio disc LD 3. Adjust the microphone volume with the MIC LEVEL control(s). Also adjust the listening level of the TV set. MIC LEVEL 1 The volume of the singer's voice (vocal) is reduced. The karaoke music recorded in the L (Left) channel is played. (This is monaural audio.) When an ordinary stereo disc is played, the singer's voice (vocal) is reduced. D i g i t a l m u l t i - The karaoke music is played in stereo. plexed audio disc (However, if the analog audio is Digital audio : selected with AUDIO D/A•CX, the Stereo effect becomes the same as the Analog audio : multiplexed audio disc described Multiplexed above.) 2 NOTES : 0 10 0 10 4. Adjust the echo with the ECHO control. ECHO 0 ● ● 10 ● ● ● ● Now start singing! When the selected music has been played, the player enters pause mode. To continue karaoke singing, select another song with the numeric buttons. ● A:To mute the voice(s) of the singer(s) from a disc : Press ONE TOUCH KARAOKE. ONE TOUCH ● The ONE TOUCH KARAOKE indicator will KARAOKE light on the display. Stereo audio disc : ● The voice(s) of the singer(s) is lare reduced so that you can practice karaoke singing. Multiplexed audio disc : ● Karaoke play starts. ● In case the audio is distorted, set the ATTENUATOR switch on the rear panel to ON. P. 8 In case playback is started with 3 , the player does not pause after having played the music. If you do not want the player to pause, press and hold 7 on the front panel for more than 2 seconds until the KARAOKE indicator turns off. The pause after playback also occurs after programmed playback P. 22 and random playback P. 20 . If you do not want the player to pause after programmed or random playback, press and hold 3 for more than 2 seconds during programmed or random playback. During the operation of the ONE TOUCH KARAOKE function, it is not possible to switch the L (Left) and R (Right) channels with AUDIO D/A•CX. The voice(s) of the singer(s) may not be reduced with certain discs, even if you press ONE TOUCH KARAOKE. 15 ENGLISH SINGING ALONG WITH KARAOKE ENTERTAINMENT  APPLIED OPERATIONS NOTES : ÷ The last memory playback function is available only with LDs. It is not available with CD and CDV discs. ÷ If playback was last stopped in the middle of side B of a double-sided disc, the last-memory playback starts from side B. ÷ When 3 is pressed to start playback after it has been stopped with 7, playback starts from the beginning of the disc. ÷ Be sure to leave the disc inside the player. Last-memory playback is not possible once the disc has been taken out of the player. ÷ Be sure to plug the AC power cord into a power outlet to which power is supplied permanently. AUDIO D/A•CX LAST MEMORY Audio switching To play an LD from the position where playback was last stopped If 7 or POWER is pressed during playback, and playback has not reached the middle of the disc, it is possible to restart playback from the position where it was stopped. When playback of an LD is stopped by pressing 7 or POWER, the address where the playback is stopped is stored in memory and, provided that the disc is left in the LD disc table, the stored address is held in memory even after the power is switched off. When you switch the power on and press LAST MEMORY, playback starts from the position where it was last stopped. LAST MEMORY LAST MEMORY To start playback directly from the position where it was stopped: Every time AUDIO D/A•CX is pressed during playback, the played audio is switched. This makes it possible to; ÷ listen to the analog audio of a disc with digital audio; ÷ listen to only one of the two channels of a stereo disc; ÷ select the audio to be played from multiplexed audio disc. LD LD with digital audio It is possible to switch between the digital and analog audio and between the L (Left) and R (Right) channels of stereo audio. 3 AUDIO Digital audio (stereo) D/A•CX 3 Analog audio (stereo) Digital audio 2 R CH 3 Analog audio L CH Digital audio 2 L CH Analog audio 2 R CH ÷ In a case of a disc recorded with Dolby AC-3 signal, only the left channel signal is heard in monaural mode when an analog audio is selected. LD with analog audio ÷ Disc containing CX auto ON (OFF) switching codes AUDIO 3 Stereo audio L CH 3 3 R CH D/A•CX ÷ Disc without CX auto ON (OFF) switching codes Position slightly before Position where playback was stopped Press LAST MEMORY once. Playback starts from the position slightly before the position where it was last stopped. To start playback after reviewing the plot from the beginning to the position where it was last stopped: Start Short playback and fast forward are repeated. Press LAST MEMORY consecutively twice. A short period of playback and fast forward operations are repeated from the beginning of the disc until slightly before the position where playback was last stopped, and normal playback starts from there. By pressing LAST MEMORY again during the fast forward operation, playback can be started directly from slightly before the position where it was last stopped. 16 AUDIO 3 CX OFF (stereo) 3 CX ON (stereo) 3 CX ON (L CH) D/A•CX CX OFF 2 (R CH) CD and AUDIO CX OFF 2 (L CH) CX ON 2 (R CH) CDV 3 Stereo audio 3 L CH 3 R CH D/A•CX LD with ° mark ° functions on the analog audio of LD. With an LD carrying the ° mark, audio can be played with reduced noise using the CX noise reduction system. Some of the discs carrying the ° mark do not contain the codes for automatic ON/OFF switching of the CX system. With such discs, turn CX ON by pressing AUDIO D/A•CX on the remote control unit. ÷ ° is a trademark of CBS. This player conforms to the extended specifications of CX.  Scan (Manual Search)--Search using fast forward or fast reverse Front Panel SEARCH SEARCH 1 ¡ CHP/TIME or CHAPTER/SKIP ¢ 4 SEARCH PLAY 1 3 SEARCH SHUTTLE ring ¡ Searching the beginning of a chapter/track Front Panel CHAPTER/SKIP 4 Press and hold ¡ or 1 during playback to start a slow scan of the image. The scan speed increases to high speed if the button is held depressed for more than 4 seconds after starting the scan. However, the high speed scan does not function during playback of a CDV (video part). Rotate the SHUTTLE ring on the remote control unit clockwise during playback to fast forward the video. Rotating the ring counterclockwise fast-reverses the video. Normal-speed playback resumes when the ring is released. ● The speed varies depending on the angle the SHUTTLE ring is rotated. From slow speed in the beginning to higher speeds when the ring is rotated further, the speed varies in 4 steps. P. 19 ¢ When a disc is scanned until the beginning: Normal playback will start. To skip to the beginning of a chapter/track, ¢ : Press to advance to the next chapter or track. 4 : Press to return to the beginning of the chapter or track being played. ● Press repeatedly to move further to other chapters/tracks. Searching the desired scene directly During fast forward or fast reverse, the audio is: Not heard. NOTES: Specify the chapter number or track number. Example: Playing an LD from the beginning of chapter No. 3 <Direct search> Press numeric button "3". 3 Note on CAV (standard play disc): During scanning, noise may appear on the screen. This is not a malfunction. Note on CLV (extended play disc): ● The scan speed is different between inner chapters and outer chapters depending on the positions they are recorded on the disc. To select chapter No. 10 or beyond: Use the +10 and 0 buttons. (Examples) 17 : +10 , 7 30 : When a disc is scanned until the end: With an LD, the player will pause at the end of the disc. With the video part of a CDV, the audio part will be searched. +10 , +10 , +10 , 0 <Normal search> It is also possible to specify a chapter or track number with CHP/ TIME as shown below. (Examples) PLAY 17 : 30 : CHP/TIME CHP/TIME , , CHP/TIME CHP/TIME , , 1 , 7 , 3 PLAY 3 , 0 , 3 To stop search in the middle: Press CLEAR during search. NOTE : Some discs do not contain the chapter numbers. Direct search and normal search are not available with these discs. 17 ENGLISH APPLIED OPERATIONS  APPLIED OPERATIONS STILL/STEP w ∑ MULTI-SPEED 2 3 Multi-speed playback by varying the playback speed and direction (LD and CDV video parts only) Still image/frame advance (LD and CDV video parts only) Freezing an image – Still image Press either w or ∑ to display a still image. MULTI-SPEED 2 3 For reverse playback For forward playback STILL/STEP e E The first press of either MULTI SPEED 2 or 3 changes the playback speed to 1/8 the normal speed. Further pressing of the same button changes the playback speed as shown below. ● A still image can also be displayed with 8 . 3 Displaying image frame by frame – Frame advance While a still image is displayed, press either w or ∑. \ | Each press reverses one frame. Each press forwards one frame. STILL/STEP w ∑ Display 1/8 1/2 x2 1/2 1/8 1/30 Speed 1/8 the normal speed Half the normal speed Twice the normal speed Half the normal speed 1/8 the normal speed 1/30 the normal speed NOTES : ● ● Press 3 to return to normal playback. The audio is not heard during still image, frame advance and multi-speed playback. Press and hold for continuous frame advance. In case a still image appears automatically during playback: Some discs contain special recorded signals called picture stop codes. When playing such a disc, you can continue playback without displaying still images on the positions where picture stop codes are recorded by pressing and holding 3 on the front panel for more than 2 seconds to activate the picture stop cancel function. On-screen display "PSC ON" is displayed for a few seconds when this function is activated. To cancel this function, press and hold 3 for more than 2 seconds until "PSC OFF" is displayed on the screen for a few seconds. 18  Searching a scene using special playback which can vary the playback speed and direction with one-touch operation (LD and CDV video parts only) JOG MODE button JOG MODE indicator JOG dial Use the SHUTTLE ring and JOG dial. SHUTTLE ring Press JOG MODE. The JOG MODE indicator lights. Frame advance, 1/2-speed, normalspeed and x2-speed playback in both forward and reverse directions are possible according to the direction and angle in which the JOG dial is rotated. x2-sp ee revers d e play Even faster x1-sp ee revers d e play Faste r JOG MODE 1/2-sp ee revers d e play Fast rotatio n Plays v ide in reve o rs Slow directi e on. counte rclockw JOG ise rotatio Norm n al pla y dial Plays v ide in forw o 1/2-sp ard eed directi on. play Slow clock wis rotati e on Fast ro tation x1-sp eed play Faste r Stop ro SHUTTLE ring: still-im tation for age p lay. x2-speed, x5-speed, x10-speed and fast forward/reverse (scan) x2-sp eed play Even faster in both forward and reverse directions are possible according to the direction and angle in which the SHUTTLE ring is rotated. Fast revers e Even mo rotati re on x10-sp ee revers d e play More rotatio n x5-sp ee revers d e play Sligh tly more rotat ion x2-sp ee revers d e play Coun terSHUTTLE clockw is rotatio e Norm n al pla y Remo for no ve hand rmal p lay. Audio is not output during special playback using the JOG dial or SHUTTLE ring. (Audio is not output even at normal speed.) With special playback of the video part of a CDV using the SHUTTLE ring: Up to x10-speed playback is possible. Fast forwarding or fast reversing at a with higher speed are not possible. To return to normal playback after JOG dial operation: Press 3. ring x2-sp eed play Clock wis rotati e on x5-sp eed play Slight more rotati on x10-s peed play More rotat ion Fast forwa rd Even mo rotati re on Set JOG MODE on the remote control unit to off when the JOG dial is not used: JOG MODE turns off automatically in about 5 minutes after the JOG dial is last operated (JOG MODE indicator also goes off). However, to save the batteries in the remote control unit, it is recommended to press JOG MODE to off after completing JOG dial operation. When a disc has been scanned until the end: A still image is displayed. When the video part of a CDV has been scanned until the end, its audio part starts to be searched. 19 ENGLISH APPLIED OPERATIONS  QUICK SCANNING OF DISC CONTENTS HILITE /INTRO Intro Scan (Available on LD and CDV video parts) RANDOM PLAYBACK (PLAYBACK IN ORDER SELECTED BY THE PLAYER) RANDOM Random playback (CD, CDV and LD with TOC only) HILITE /INTRO When the button is pressed during playback or in stop mode: The first 8 seconds of every chapter will be played in order. When 3 is pressed, normal playback starts from that position. When the disc has been scanned until the last chapter, normal playback starts from chapter No. 1. Highlight Scan (Available on CD and CDV audio parts) HILITE /INTRO When the button is pressed in stop mode: Highlight Scan starts, with which on 8-second section starting 1 minute after the beginning of every track, will be played in order. When the button is pressed during playback: Assuming that the time elapsed from the beginning of the track being played until the position where the button is pressed is called the Highlight Scan starting period, the 8-second section will be played after this starting period, on every track beginning with track No.1. NOTES : ÷ With a CDV, the operation begins with Intro Scan of the video part and continues to Highlight Scan of the audio part. ÷ Intro Scan is not available with discs which do not contain recorded chapter numbers. ÷ When a track is shorter than 1 minute or than the set starting period, Highlight Scan of that track starts at the beginning and lasts for 8 seconds. If a track is shorter than 8 seconds, it will be played entirely from the beginning. 20 RANDOM Press RANDOM. With an LD, first press QUICK TURN to turn the quick-turn off, then press 3 and finally press RANDOM. All chapters/tracks in the disc are played in a random order selected by the player. Random playback stops after all of the chapters/ tracks on the disc have been played. During random playback: ÷ Pressing ¢ plays the next selected track. ÷ Pressing 4 replays the track being played from the beginning. ÷ Pressing CLEAR cancels random playback and starts normal playback. ÷ Pressing RANDOM again restarts random playback with a newly selected order of tracks. To stop random playback: Press 7. NOTES : ÷ Chapter 0 is not included in random playback. ÷ Random playback of programmed chapters/tracks is not possible. ÷ Random playback is not possible with an LD without a TOC. P. 7 ÷ While the quick-turn is on, random playback is not possible even with an LD containing a TOC. In this case, stop playback and turn off the quick-turn function before starting random playback. P. 14  1 ENGLISH TO SEARCH FOR A DESIRED FRAME 1 2 CHP/TIME 2 CHP/TIME 3 3 PLAY PLAY 3 3 This function is available on LDs only. This function is available on LDs only. With a CAV (standard play) disc, the desired image can be searched by specifying the frame number (refer to page 7 for definitions). With a CLV (extended play) disc, a desired image can be searched by specifying the time number (refer to page 7 for definitions). (Example) To search the image at frame No. 1234: 1. Press CHP/TIME during playback. (Example) To search the image at 12 min, 34 sec.: 1. Press CHP/TIME during playback. CHP/TIME CHP/TIME 2. Press numeric buttons 1, 2, 3 and 4. 2. Press numeric buttons 1, 2, 3 and 4. 1 1 2 3 2 3 4 4 3. Press 3 . 3. Press 3 . PLAY PLAY 3 3 Still image of the specified time is displayed. ● The specified frame is searched and a still image is displayed. ● Press 3 again to restart normal playback. Press 3 again to restart normal playback. NOTES : ● ● With a disc which does not contain time information in seconds, specify the time in minutes (2 digits). If the time number or frame number specified is greater than the last number on the disc, the player pauses at the end of the disc. 21  PROGRAMMED PLAYBACK (PLAYING CHAPTERS/TRACKS BY CHANGING THEIR ORDER AS REQUIRED) Desired chapters (LD) or tracks (CDV/CD) can be programmed to be played in a desired order. Up to 24 chapters/tracks can be programmed at a time. ÷ Programming operation can be made easier by observing the on-screen display or display window during operation. 1 PLAY 3 Programmed playback starts after searching the first programmed track/chapter. In the examples above, the programmed playback starts from chapter/track No. 9. When chapter/track Nos. 9, 7, and then 18 have been played, the player enters stop mode. 2 PROGRAM 3. Press 3 . Programming of pause 3 Programming pauses together with chapter/track numbers is very convenient for recording the programmed playback. ÷ In case of recording the programmed playback on two sides of an audio tape, it is recommended to program a pause after the last chapter/track to be recorded on the first side of the tape. This makes it possible to flip the tape while playback is paused and avoid making a recording mistake. ÷ While programmed playback is paused, it is possible to record a narration or create a non-recorded blank. Pressing 8 in pause mode resumes programmed playback so that recording can be restarted. ÷ It is not possible to record a pause as the final step of the program. PLAY 3 1. Press PROGRAM. PROGRAM Indication of programmed pause 2. Select the chapters or tracks to be programmed. <With a double-sided LD> Example : Programming chapter 9 on side B, chapter 7 on side A and then chapter 18 on side B 1 Select side A or B. "8" appears on the TV screen and "PA" appears on the display window. To check the programmed contents When PGM is pressed during or after programmed playback, the programmed contents can be displayed on the TV screen. Pressing PGM again turns off the display of the programmed contents. To modify programmed content B 2 Specify the chapter number. 9 ÷ Program the next chapter by repeating steps 1 and 2 above. = 7 A B +10 8 To clear the entire program <With a single-sided LD, CD or CDV> Example : Programming CD tracks 9, 7, and then 18 ÷ Press numeric buttons 9, 7, +10, and then 8. 9 7 +10 8 If you press a wrong numeric button : Press CLEAR, then press the correct numeric button(s). 22 To delete a programmed chapter number, track number or pause : 1. Press PGM. 2. Press either 4 or ¢ to move ‰ (the cursor) to the chapter number, track number or pause to be modified. If you want to replace that content, press the numeric button. If you want to program a pause, press 8. If you want to clear content, press CLEAR. 3. Press PGM to complete. If you press 3 in place of PGM, programmed playback starts from the first programmed chapter or track. ÷ It is not possible to replace or clear the chapter or track being played. ÷ Open the disc table. ÷ Press CLEAR in stop mode. ÷ When CLEAR is pressed during playback, the programmed playback is canceled and normal playback starts. Pressing CLEAR again also clears the programmed contents.  To repeat a chapter/track being played ÷ Press REPEAT once during playback of the chapter or track to be repeated. REPEAT A–B REPEAT Press once PLAY 3 To repeat programmed playback It is possible to play programmed chapters or tracks repeatedly in the order they were programmed. Press REPEAT once during programmed playback. ÷ For programming, refer to . P. 22 To repeat random playback To return to the specified position A–B \ PLAY 3 It is possible to play tracks in a randomly selected order repeatedly. Press REPEAT once during random playback. ÷ For random playback, refer to P. 20 . To repeat the entire side of a disc PLAY During playback, press REPEAT A-B at the desired position. To return to the specified position, press 3. Press REPEAT twice. ÷ When one side of the disc has played back, the same side is repeated from the beginning. REPEAT ÷ Press CLEAR if you want to cancel the command. To repeat the desired section repeatedly A–B A–B \ Press twice To repeat both sides of a disc (double-sided LD only) Press REPEAT 3 times. ÷ Playback starts with side A and continues on side B. When both sides of the disc have played back, both sides are repeated alternately. REPEAT Press 3 times PLAY Press REPEAT A-B at the beginning of the section to be repeated. Press REPEAT A-B at the end of the section to be repeated. ÷ The repeat playback above is not possible if the section extends over both the audio and video parts of a CDV. Repeat playback extending over sides A and B of a double-sided LD is also impossible. To stop repeat playback : Press CLEAR, or press REPEAT so that the REPEAT indicator turns off. The repeat mode is canceled but playback continues as normal playback. With an LD which does not contain chapter numbers : It is not possible to repeat a chapter. With such a disc, press REPEAT once for one-side repeat playback. 23 ENGLISH REPEAT PLAYBACK  ON-SCREEN DISPLAY The actual on-screen display is a shown below. Chapter/track number Elapsed time or frame number DISPLAY 3 12 . 49 REMAIN TIME ALL 28.12 PLAY DIGITAL STEREO Selected sound PLAY indication TOTAL TIME : Total playing time REMAIN TIME : Remaining time DISC TIME : Elapsed time from the beginning of disc ALL : Indicates total (remaining time). TRK : Indicates track. Use DISPLAY on the remote control unit to display information such as the current playback mode, track/chapter number and playing time on the TV screen. Each press of DISPLAY changes the displayed information as follows: LD with TOC (CAV standard play disc) CDV or CD 1 ∞ 2 Remaining time of the track being played. ∞ REMAIN TIME ALL 3 Remaining time from the position being played until the end of the disc. ∞ TOTAL TIME 4 Total playing time from the beginning to the end of the disc. LD with TOC (CLV extended play disc) Elapsed time from the beginning of the disc Frame number being played. Elapsed time of track being played. REMAIN TIME TRK If the on-screen display is left for a long period (about 80 minutes), it turns off automatically. The on-screen display re-appears when any button is pressed. ∞ ∗ DISC TIME ∗ Elapsed time from the beginning of the disc. ∗ ∞ REMAIN TIME ALL Remaining time from the position being played until the end of the disc. ∗ ∗ ∞ REMAIN TIME ALL Remaining time from the position being played until the end of the disc. ∞ TOTAL TIME Total playing time from the beginning to the end of the disc. ∞ ∞ TOTAL TIME On-screen display disappears. Total playing time from the beginning to the end of the disc. ∞ ∞ On-screen display disappears. On-screen display disappears. LD without TOC : NOTE : Only the frame number (CAV standard play disc) or the elapsed time from the beginning of the disc (CLV extended play disc) is displayed on the TV screen. The DISC TIME, REMAIN TIME ALL, TOTAL TIME, and elapsed time displays, cannot be displayed when using quick turn on, even if the LD has TOC. P. 14 To display the information, stop playback, turn off the quick-turn function and restart playback. 24  Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest YAMAHA authorized service center or your dealer to carry out repair work. Common for LD and CD Causes Symptom Ref. Page Operation 1. The disc table closes and then re-opens. ÷ The disc is extremely dirty. ÷ The disc is not placed properly on the disc table. ÷ Dew is condensed inside the player. p. 6 p. 12 p. 5 Remote control 2. Remote control is not possible. ÷ The remote control unit is too far from the player or it is operated at too great an angle with respect to the remote control sensor. ÷ The batteries are run out. ÷ Some TV sets incorporating the wireless remote control function may function improperly due to the remote control unit of the player. p. 11 3. The TV, etc., functions improperly. Audio 4. Audio is not output or audio is distorted. ÷ ÷ ÷ ÷ ÷ Connection plugs are inserted insufficiently or disconnected. Connection plugs or jacks are dirty. The player is in pause mode. The connection with the stereo amplifier is erroneous. The stereo amplifier is operated improperly. (Refer to the amplifier's instruction manual.) ÷ The player is connected to the PHONO input jacks of the stereo amplifier. ÷ ONE TOUCH KARAOKE is turned on. p. 9 p. 9 p. 15 LD Causes Symptom Video, picture quality Audio (LD) Skip, search Ref. Page 5. Video is not displayed. ÷ The TV power is off. 6. Video is not displayed or the displayed video is of a lowquality or is noisy. 7. A part of the still image is shaking. ÷ The disc is extremely deformed (warped, etc.). ÷ The connection plug is not fully inserted or is disconnected. 8. Audio is “breathing” (the Level varies with frequency). 9. Audio is not heard. ÷ A disc without the ° mark is being played with the CX system turned on. ÷ Audio is not output during multi-speed playback, still image and frame advance playback. p. 16 10.Skip, programming and search are not possible. ÷ The disc being played does not contain recorded chapter numbers. (The functions utilizing the chapter numbers do not work on discs which do not contain chapter numbers.) ÷ Some discs need a longer time to read data. p. 17 p. 22 11.Search takes a long time (more than 40 seconds). 12.The time taken to start playback is sometimes long. 13.Other image than specified is played back. p. 6 ÷ Even with the standard disc, a part of the still image may shake in the case it is a scene containing quick action. p. 18 ÷ Error in data readout does occur sometimes. (This is not a malfunction.) ÷ Error in data readout does occur sometimes. (This is not a malfunction.) 25 ENGLISH TROUBLESHOOTING  TROUBLESHOOTING CD Causes Symptom Operation (CD) 14. Playback stops immediately after it has been started. Ref. Page ÷ The disc is extremely dirty. ÷ The disc is placed upside down. ÷ The disc is not placed properly on the disc table. p. 6 p. 12 p. 12 ONE TOUCH KARAOKE Symptom Causes 15.The voice of the singer is not muted even when ONE TOUCH KARAOKE is pressed. ÷ The voice of the singer is not muted unless it is located on the center of the acoustic image. 16.Playback will not stop when one chapter or track is finished. ÷ Chapters or tracks are not selected with the numeric buttons. Ref. Page p. 15 CAUTION : Abnormal functioning of this unit may be caused by static electricity or other external interference. To restore normal operation, unplug the AC power cord and then plug it in again. When troubles occur : When some trouble occurs during use of the player, the following display (service number) appears on the display window of the player and the TV screen. If you experience this kind of trouble, follow the "Remedy" below. Display window of the player TV screen U1 Service number Service number 26 Service number Condition of the player Remedy U1 U2 ÷ The disc is not loaded properly on the disc table. Or, the disc is dirty. ÷ Reload the disc along the disc guide groove on the disc table. ÷ Wipe the disc with a soft cloth. Open the disc table and press 3 again. F5 ÷ Two discs are loaded on the disc table. Or, the disc is dirty. ÷ Load only one disc on the disc table. ÷ Wipe the disc with a soft cloth. P2 L3 E4 (The displayed number after P, F, L and E differs depending on the condition of the player.) ÷ Open the disc table and press 3 again. ÷ If the same service number is displayed, the player is in abnormal condition. ÷ When requesting servicing, please mention the displayed number on the display window of the player or on the TV screen (for example, 'service number E4'). H0 H1 H2 A0 ÷ The player is in abnormal condition. ÷ When requesting servicing, please mention the displayed number on the display window of the player or on the TV screen (for example, 'service number H1').  General Other terminals System ............................................... LaserVision Disc system and Compact Disc digital audio system Laser ............................... Semiconductor laser wavelength 780 nm Power requirement ................................................ AC 120 V, 60 Hz Power consumption ................................................................. 37 W Weight .................................................................. 7.1 kg (15.65 lbs) Dimensions .................................... 430 (W) x 407 (D) x 132 (H) mm 16-15/16 (W) x 16 (D) x 5-3/16 (H) in Operating temperature .............................................. +5ºC ~ +35ºC (41ºF ~ 95ºF) Operating humidity ......................................................... 5% ~ 85% (There should be no condensation of moisture.) Optical digital output ............................................ Optical digital jack AC–3 RF OUT .................................................................... RCA jack Video characteristics (2 outputs) Accessories Remote control unit ........................................................................ 1 Size "AAA" (IEC R03) dry cell batteries ........................................... 2 Video cord ...................................................................................... 1 Audio cord ...................................................................................... 1 NOTE : The specifications and design of this product are subject to change without notice, due to improvement. Format .............................................................. NTSC specifications Video output Level .......................... 1 Vp-p nominal,sync.negative,terminated Impedance ....................................................... 75 Ω unbalanced Jacks ........................................................................... RCA jacks S VIDEO output (2 outputs) Y output level ............................................................... 1 Vp-p (75Ω) C output level ........................................................ 286 mVp-p (75Ω) Jacks ......................................................................... S VIDEO jacks Audio characteristics (2 outputs) Output level During analog audio output ...................................... 200 mVrms (1 kHz, 40%) During digital audio output ....................................... 200 mVrms (1 khz, –20 dB) Jacks ....................................................................... Both RCA jacks Number of channels ......................................................... 2 (Stereo) Digital Audio Characteristics Frequency response SN ratio Dynamic range Total harmonic distortion Wow and flutter 4 Hz - 20 kHz 115 dB (EIAJ) 96 dB (EIAJ) Below 0.0035% Below measurable limit (± 0.001% W.PEAK) (EIAJ) LD is in compliance with EIAJ. 27 ENGLISH SPECIFICATIONS  s YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA 28 ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT, BP70 CROISSY-BEAUBOURG,77312 MARNE-LA-VALLEE, CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VASTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA