Yamaha RX-V767 El manual del propietario

Marca: Yamaha

Modelo: RX-V767

Categoría: Receptores AV

Tipo: El manual del propietario

Owner’s Manual

AV Receiver English for Asia*, Africa, Oceania

and Latin America

*Except for China and Korea

En 2

CONTENTS

INTRODUCTION

Features and capabilities ...................................................4

Using the TV OSD to operate the unit .............................5

View or modify content for the current input source

<Content window> ...........................................................5

Configuring settings for this unit

<ON SCREEN menu>......................................................5

Adjust settings for each input source

<OPTION menu> ............................................................. 6

About this manual............................................................. 7

Supplied accessories......................................................... 7

Part names and functions..................................................8

Front panel........................................................................8

Rear panel......................................................................... 9

Front panel display .........................................................10

Remote control ...............................................................11

On-screen display ........................................................... 12

CONNECTIONS

Connecting speakers ........................................................13

Speaker channels and functions...................................... 13

Speaker layout ................................................................14

Connecting speakers and subwoofer .............................. 17

Connecting external components....................................20

Cable plugs and jacks .....................................................20

Connecting a TV monitor............................................... 21

Connecting BD/DVD players and other devices............24

Connecting game consoles ............................................. 28

Connecting a multi-format player

or an external decoder .................................................... 28

Connecting an external amplifier ................................... 29

Connecting a SCENE link

playback-compatible device ...........................................29

Using the Trigger function to link

external component power.............................................. 30

Connecting audio/video recording devices.....................30

Connecting the FM/AM antennas .................................. 31

Setting up the speaker parameters automatically

(YPAO).............................................................................. 32

PLAYBACK

Basic playback procedure ............................................... 40

Adjusting high/low-frequency sound (Tone control) ..... 41

Changing input settings with a single key

(SCENE function) ............................................................ 42

Registering input sources/sound program/

HDMI OUT .................................................................... 42

Enjoying the desired sound field effect.......................... 42

Selecting sound programs and sound decoders.............. 42

Sound programs.............................................................. 46

Using the TV display to control this unit....................... 48

Basic operations via the TV screen display ................... 48

Configuring settings specific to

an individual input source (OPTION menu)................. 50

OPTION menu display and setup................................... 50

OPTION menu ............................................................... 51

Confirming and operating input sources

from the Content window ............................................... 54

Displaying the Content window on the TV screen......... 54

Switching the display between the Now Playing view

and the Content browse view ......................................... 54

FM/AM tuning ................................................................. 55

Selecting a frequency for reception (Normal tuning)..... 55

Confirming and operating the FM/AM tuner

from the Content window............................................... 57

Playing back tunes from your iPod™/iPhone™ ........... 59

Connecting the Universal Dock for iPod/iPhone ........... 59

Controlling an iPod™/iPhone™ .................................... 59

Playing iPod/iPhone from the menu screen

(Menu browse control) ................................................... 60

Operating basic playback functions

via the remote control (Simple remote control) ............. 62

Playing iPod™/iPhone™ with wireless connection ...... 62

Playing back tunes from Bluetooth™ components ...... 64

Connecting a Yamaha Bluetooth

wireless audio receiver................................................... 64

Pairing Bluetooth™ components ................................... 64

Using Bluetooth™ components ..................................... 65

En 3

SETUP

Configuring input sources (Input menu) .......................66

Configuring input sources ..............................................66

Input menu......................................................................67

Editing the SCENE function (SCENE menu) ...............70

Editing a scene................................................................ 70

SCENE menu..................................................................71

Setting sound program parameters

(Sound Program menu) ...................................................73

Editing sound programs..................................................73

CINEMA DSP parameters ............................................. 74

Parameters usable in certain sound programs ................76

Parameters usable in surround decoder .......................... 77

Setting various functions (Setup menu) .........................78

Operating the Setup menu ..............................................78

Setup menu .....................................................................79

Manages settings for speakers ........................................79

Setting the audio output function of this unit .................83

Setting this unit’s video output function.........................84

Setting HDMI functions .................................................85

Setting this unit’s multi-zone function ...........................88

Making the receiver easier to use ................................... 88

Language ........................................................................91

Confirming information of this unit

(Information menu) .........................................................92

Selecting information .....................................................92

Controlling other components

with the remote control.................................................... 93

Keys connecting external components ...........................93

Default remote control code settings.............................. 94

Registering remote control codes

for external component operations .................................94

Resetting all remote control codes ................................. 95

Extended functionality that can be configured

as needed (Advanced Setup menu).................................96

Displaying/Setting the Advanced Setup menu ...............96

Setting the impedance of speakers ................................96

Avoiding crossing remote control signals

when using multiple Yamaha receivers .......................... 97

Changing TV format ...................................................... 97

Removing HDMI video output up-scaling limits........... 97

Changing FM/AM frequency steps

(Asia and General models only)..................................... 98

Initializing various settings for this unit......................... 98

Using the HDMI Control function ................................. 99

Using multi-zone configuration .................................... 103

Connecting Zone2 ........................................................ 103

Controlling Zone2 ........................................................ 104

Using the party mode ................................................... 104

APPENDIX

Troubleshooting ............................................................. 105

General ......................................................................... 105

HDMI™ ....................................................................... 107

Tuner (FM/AM) ........................................................... 108

iPod™/iPhone™ .......................................................... 109

Bluetooth™ .................................................................. 109

Remote control ............................................................. 110

Glossary .......................................................................... 111

Audio information ........................................................ 111

Sound program information ......................................... 112

Video information ........................................................ 112

Video conversion .......................................................... 113

Information on HDMI™............................................... 114

About trademarks.......................................................... 114

Specifications.................................................................. 115

Index ............................................................................... 117

En 4

INTRODUCTION

■ Built-in high-quality, high-power 7-channel amplifier

■ 6 HDMI input jacks (5 + 1 VIDEO AUX) supporting Audio Return Channel and 3D

video signal

■ 2 HDMI output jacks

– Selecting the HDMI OUT jack ................................................................................................................40

■ 1-button input/sound program switching (SCENE function)................................42

■ Speaker connections for 2- to 7.1-channel configurations

– Speaker impedance configuration............................................................................................................18

– Speaker channels and functions ...............................................................................................................13

– Speaker layout..........................................................................................................................................14

– Speaker cable connection.........................................................................................................................17

– Subwoofer cable connection ....................................................................................................................19

– High quality playback using bi-amplification connections .....................................................................18

■ Automatic settings for speaker acoustic parameters

(YPAO - Yamaha Parametric Room Acoustic Optimizer) ......................................32

■ External component connection (max. 16 inputs) and playback

– External component connection...............................................................................................................20

– Protective cover for front panel jacks ........................................................................................................7

– Configuring the settings specific for each input source <OPTION menu>.............................................50

– Playback from external components........................................................................................................40

– Playback from an iPod/iPhone with wired connection ............................................................................60

– Playback from an iPod/iPhone with wireless connection ........................................................................62

– Playback from a Bluetooth component (Bluetooth and components sold separately) ............................64

■ FM/AM tuner

– Receiving an FM/AM broadcast..............................................................................................................55

– Presetting stations ....................................................................................................................................55

– Simple preset tuning ................................................................................................................................55

– Changing FM mode (Stereo/Mono).........................................................................................................57

– (Asia and General models only) Changing FM/AM frequency steps .....................................................55

■ Multi-channel, multi-format playback

– Sound field effect selection......................................................................................................................42

– Playback without sound field effects .......................................................................................................43

– Stereo playback........................................................................................................................................43

– Compressed-music playback ...................................................................................................................45

■ Front panel information display/on-screen display (OSD) on the TV screen

– Switching information on the front panel display ...................................................................................10

– Operating this unit using the on-screen display.......................................................................................12

■ Volume adjustment functions

– Easy listening at low volumes < Adaptive DRC> ...................................................................................52

– Adjusting volume between input sources <Volume Trim> .....................................................................53

■ Remote control operation

– External component operation with this unit’s remote control................................................................93

– Multiple Yamaha receiver operation without signal interference <Remote ID Switching>....................97

■ Playing back the audio source in another room

– Using the internal amplifier for playback ................................................................................................18

– Using the external amplifier for playback .............................................................................................103

– Configuring the settings for another room.............................................................................................103

– Controlling the external component in another room............................................................................104

■ Other features

– Standby mode after a specific amount of time <Sleep timer>.................................................................11

– Charging the iPod/iPhone when this unit is in standby mode <iPod Standby Charge> ..........................68

Features and capabilities

Most of this unit’s functions can be operated by following instructions displayed on the TV screen.

Refer to “Using the TV OSD to operate the unit” on the following pages for information on

functions that can be controlled using the on-screen display.

INTRODUCTION

En 5

This unit features a sophisticated on-screen display (OSD) for the TV screen. The OSD is designed to enable visual guidance that simplifies operations. The OSD mainly displays the ON SCREEN and

OPTION menus, as well as the Content window that displays the content of current input sources.

■ Select an input source, SCENE and sound program

– Select an input source ..............................................................................................................................48

– Select a SCENE .......................................................................................................................................49

– Select a sound program............................................................................................................................49

View or modify content for the current input source <Content

window>

■ Operate the AM/FM tuner

– Display a list of preset stations for selection ...........................................................................................58

– Display information on the station currently received.............................................................................57

– Perform operations such as searching for and registering stations using the Utility <Utility> ...............57

■ Display the list of iPod music sources

– Display the list of iPod music sources for selection ................................................................................60

– Perform operations such as play, stop and pause using the TV screen <Menu browse control> ............60

– Perform basic playback functions such as play, stop and pause

via the remote control <Simple remote control> .....................................................................................62

Configuring settings for this unit <ON SCREEN menu>

– Display the ON SCREEN menu on the TV screen..................................................................................48

■ Select and configure an input source

– Select an input source ..............................................................................................................................48

– Play the audio/video signal from the selected input source.....................................................................40

– Change the input source name <Rename/Icon Select> ...........................................................................67

– Select the audio input jack separately from the video input jack <Audio In>.........................................68

– Specify a format for digital audio signals <Decoder Mode>...................................................................68

– Enhance the sound of compressed audio <Enhancer>.............................................................................68

– Output a video signal input from another input source

while playing a multi-channel audio signal <Video Out> .......................................................................69

– Charge the iPod/iPhone when this unit is in standby mode <Standby Charge>......................................68

■ Select and customize a SCENE

– Select a SCENE .......................................................................................................................................49

– Register or clear settings for a selected SCENE <Save>, <Reset> .........................................................71

– Turn on a Yamaha BD/DVD player or CD player connected to this unit automatically

when a SCENE is selected <SCENE IR>................................................................................................71

■ Select and adjust a sound program (sound program)

– Select a sound program............................................................................................................................49

– Adjust sound program parameters ...........................................................................................................73

■ Display settings information for this unit

– Display audio signal information <Audio Signal>..................................................................................92

– Display video signal information <Video Signal> ..................................................................................92

– Display HDMI signal information <HDMI - Monitor Info.>..................................................................92

■ Adjust acoustic parameters to match your speakers and listening environment

– Specify speaker acoustic parameters automatically

(Yamaha Parametric Room Acoustic Optimizer - YPAO).......................................................................32

– Set up this unit’s speaker configuration simply <Power Amp Assign> ..................................................79

– Specify settings for each speaker <Configuration>.................................................................................80

– Control volume control for each speaker <Level> ..................................................................................81

– Apply speaker distance settings <Distance> ...........................................................................................81

– Control equalizer sound quality <Parametric EQ>..................................................................................82

– Adjust test tone speaker <Test Tone> ......................................................................................................82

■ Adjust audio signals output from this unit

– Correct lag between audio and video signals <Lipsync> ........................................................................83

– Select a dynamic range adjustment method <Dynamic Range> .............................................................83

– Specify the maximum volume <Max Volume> .......................................................................................83

– Specify the initial volume <Initial Volume>............................................................................................84

– Adjust DSP effect and volume level <Adaptive DSP Level>..................................................................84

Using the TV OSD to operate the unit

Continues to the

INTRODUCTION

Using the TV OSD to operate the unit

En 6

■ Adjust video signals output from this unit

– Convert analog video signal to another type of signal <Analog to Analog Conversion> .......................84

– Specify the resolution and aspect ratio of analog video signal converted to HDMI or specify upscaling

resolution for 480i/576i- or 480p/576p-HDMI output signal <Processing> ...........................................85

■ HDMI settings

– Assign the audio input source for the TV <TV Audio Input>.................................................................86

– Listen to TV audio with HDMI cable connection <ARC (Audio Return Channel)>..............................86

– Transmit HDMI audio/video to the TV during standby mode <Standby Through> ...............................87

– Change the output destination of HDMI input audio signals <Audio Output>.......................................87

■ Enable listening in multiple rooms (multi-zone function)

– Adjust Zone2 volume <Zone2 Set>.........................................................................................................88

■ Specify other functions for this unit

– Enter standby mode automatically when no operations are performed <Auto Power Down>................89

– Adjust the brightness of the front panel display <Dimmer> ...................................................................89

– Change the wall paper displayed on the TV screen <Wall Paper>..........................................................89

– Specify the function of the TRIGGER OUT jack for controlling external components

<Trigger Output> .....................................................................................................................................90

– Prohibit changes to settings <Memory Guard> .......................................................................................91

■ Select a language

– Change the language displayed on the TV screen <Language>..............................................................91

Adjust settings for each input source <OPTION menu>

– Display the OPTION menu on the TV screen .........................................................................................50

– Select the 5.1-channel signal playback method <Extended Surround>...................................................52

– Adjust bass and treble levels <Tone Control> .........................................................................................51

– Enable low-volume background music <Adaptive DRC>.......................................................................52

– Adjust the volume of input sources <Volume Trim>...............................................................................53

– Adjust the vertical position of dialogues <Dialogue Lift> ......................................................................52

En 7

INTRODUCTION

Using the TV OSD to operate the unit

About this manual

Supplied accessories

Check that you received all of the following parts.

• Remote control

• Batteries (AAA, R03, UM-4) x 2

• YPAO microphone

• AM loop antenna

• Indoor FM antenna

• VIDEO AUX input cover

• Some features are not available in certain regions.

• This manual is created prior to production. Design and

specifications are subject to change in part as a result of

improvements, etc. In case of differences between the manual and

product, the product has priority.

• “

dHDMI1” (example) indicates the name of the parts on the

remote control. Refer to the “Remote control” (☞

p. 11) for the

information about each position of the parts.

• J

1 indicates that the reference is in the footnote. Refer to the

corresponding numbers on the bottom of the page.

• ☞

indicates the page describing the related information.

• Click on the “ ” at the bottom of the page to display the

corresponding page in “Part names and functions.”

Front panel

Rear panel

Front panel display

Remote control

■ Attaching the VIDEO AUX input cover (supplied)

To protect against dust, attach the supplied VIDEO AUX input

cover to the VIDEO AUX jacks when you do not use the jacks.

To remove the cover, push the left section of it.

Attach the cover

PUSH

Remove the cover

■ Installing batteries in the remote control

When inserting batteries in the remote control, remove the

battery compartment cover from the reverse side of the remote

control, and insert two AAA batteries into the battery

compartment so that they match with the polarity markings (+

and -).

Replace the batteries with new ones if the remote control can

only be operated within a narrow range.

NOTE

If there are remote control codes for external components

registered to the remote control, removing the batteries for more

than 2 minutes, or leaving exhausted batteries in the remote

control, may clear the remote control codes. If this should occur,

replace the batteries with new ones, and set the remote control

codes.

Battery compartment

cover

Battery compartment

INTRODUCTION

En 8

Front panel

a MAIN ZONE A (Power)

Switches this unit between on and standby mode.

b HDMI Through/iPod Charge indicator

Lights up in any of the following cases while the unit is in standby

mode.

• When the Standby Through function is enabled and audio/video from

an external component connected with HDMI is output to a TV

during standby mode (☞

p. 87).

• When an iPod/iPhone, which is placed in the Universal Dock for iPod/

iPhone, is charging while the unit is in standby mode (☞

p. 62).

This indicator also lights up when the Yamaha iPod wireless receiver

is connected to this unit (☞

p. 62).

c ZONE2

Switches to enable/disable the audio output to Zone2 (☞

p. 104).

d ZONE CONTROL

Switches to Zone2 operation mode. This unit, or its remote control,

can be used to select input sources or adjust volume for an external

amplifier in another room or the built-in amplifier for speakers in

another room (☞

p. 104).

e INFO

Changes the information displayed on the front panel display

(☞

p. 10).

f MEMORY

Registers FM/AM stations as preset stations (☞

p. 56). J1

g PRESET j / i

Selects an FM/AM preset station (☞

p. 57). J1

h FM/AM

Sets the FM/AM tuner band to FM or AM (☞

p. 55). J1

i Front panel display

Displays information on this unit (☞

p. 10).

j TUNING jj / ii

Changes FM/AM tuner frequencies (☞

p. 55). J1

k PURE DIRECT

Switches this unit to Pure Direct mode (☞

p. 45).

l INPUT selector

Selects an input source from which to playback. Rotate this selector to

cycle through the input sources in order.

m PHONES jack

For plugging headphones in. Sound effects applied during playback

can also be heard through the headphones.

n YPAO MIC jack

Connect the supplied YPAO microphone and adjust the speaker balance

automatically (☞

p. 32).

o TONE CONTROL

Adjusts high-frequency/low-frequency output of speakers/headphones

(☞

p. 41).

p SCENE

Switches the input source, the sound program, and the HDMI OUT

with a single button (☞

p. 42, p. 70). When this unit is in standby

mode, press this key to switch on.

q PROGRAM selector

Selects a sound program (☞

p. 42). Rotate this selector to cycle

through sound programs.

r STRAIGHT

Changes a sound program to straight decoding mode (☞

p. 43).

s VIDEO AUX jacks

For connecting game consoles to this unit temporarily (☞

p. 28).

Attach the supplied VIDEO AUX input cover when not using this jack

(☞

p. 7).

t VOLUME

Adjusts the volume level.

Part names and functions

VIDEO

AUX

PHONES

YPAO MIC

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

VOLU ME

DVD

RADIO

INPUT

PROGRAM

SCENE

VIDEO

AUDI O

HDMI IN

INFO

ZONE

CONTROL

ZONE2

MAIN ZONE

MEMORY

PRESET

FM AM

TUNING

PURE DIRECT

rm n q

olts

ic f g ked h jb

1 : Usable when you have selected TUNER input.

En 9

INTRODUCTION

Part names and functions

Rear panel

a DOCK jack

For connecting an optional Universal Dock for iPod/iPhone (such as

YDS-12), iPod wireless receiver (YID-W10), or Bluetooth wireless

audio receiver (YBA-10) (☞

p. 59, p. 62, p. 64).

b PHONO jacks

For connecting a turntable (☞

p. 27).

c HDMI OUT 1-2 jacks

For connecting an HDMI - compatible TV to output audio/video

signals (☞

p. 22).

d ANTENNA jacks

For connecting AM and FM antennas (☞

p. 31).

e MONITOR OUT jacks

f REMOTE IN/OUT jacks

For connecting an external component that supports the remote

control function (☞

p. 29).

g HDMI1-5 jacks

For connecting external components equipped with HDMI-

compatible outputs to receive audio/video signals (☞

p. 24).

h SPEAKERS terminals

For connecting the front, center, surround and surround back speakers

(☞

p. 17). Connect the presence speakers (☞p. 17) or the speakers for

Zone2 (☞

p. 18) to the EXTRA SP jacks.

i VOLTAGE SELECTOR

(Asia and General models only)

Select the switch position according to your local voltage (Refer to

Quick Reference Guide).

j Power cable

For connecting this unit to an AC wall outlet.

k AV1-6 jacks

For connecting to external components equipped with audio/video

outputs to receive audio/video signals (☞

p. 25).

l AV OUT jacks

For outputting audio/video signals received when analog inputs (AV3-

6 or AUDIO1-2) are selected (☞

p. 30).

m AUDIO1-2 jacks

For connecting external components equipped with analog audio

outputs to input sound into this unit (☞

p. 27).

n TRIGGER OUT jack

For connecting an external component that supports the trigger

function to operate it linked with operation of this unit (☞

p. 30).

o MULTI CH INPUT jacks

For connecting a player that supports a multi-channel output

(☞

p. 28).

p AUDIO OUT jacks

For outputting audio signals received when analog jacks, such as the

AV5-6 or AUDIO1-2 are selected (☞

p. 30).

q ZONE2 OUT jacks

Outputs sound of this unit to an external amplifier set in a different

room. (☞

p. 103).

r PRE OUT terminals

For connecting a subwoofer with built-in amplifier or an external

power amplifier (☞

p. 19, p. 29).

VIDEO jack For connecting a TV capable of receiving video

input, and outputting video signals to it (☞p. 22).

COMPONENT

VIDEO jacks

For connecting TV that are compatible with

component video signals, using three cables to

output video signal (☞p. 22).

OUT

AUDIO

OUT

ZONE2

OUT

SURROUND

SUR.BACK

PRE OUT

SUBWOOFER

FRONT

CENTERSINGLE

HDMI OUT

ARC ARC

SELECTABLE

COMPONENT

VIDEO

(

)

AV 4

AV 5

AV 6

AUD

IO 1

AUD

IO 2

MULTI CH INPUT

PTI

HDMI 1

(

)

HDMI 2

HDMI

HDMI 4 HDMI 5

ENTER

ND BA

AMP

INGL

SUBWOOFE

R.BA

TRIGGER OUT

+12V

MAX.

CENTE

REMOTE

PEAK

SPEAKE

ANTENNA

Distinguishing the input and output jacks

The area around the audio/video output jacks is marked

in white to prevent connection errors. Use these jacks to

output audio/video signals to a TV or other external

component.

Output jacks

DOCK

(

)

AV 3

AV 4

AV 5

AV 6

AUDI O 1

AUDI O 2

MULTI CH INPUT

(

)

COAXIAL

OPTICAL

VIDEO

HDMI 1

(

BD/DVD

)

HDMI 2 HDMI 3

HDMI 4 HDMI 5

CENTER

SURROUND

SURROUND BACK/

BI-AMP

SINGLE

EXTRA SP

FRONT

OUT

SUBWOOFER

AUDIO

OUT

ZONE2

OUT

SUR.BACK

SURROUND

SUR.BACK

PRE OUT

SUBWOOFER

FRONT

TRIGGER OUT

+12V

0.1A MAX.

FRONT

CENTER

REMOTE

OUT

CENTERSINGLE

HDMI OUT

ARC ARC

SELECTABLE

VOLTAGE

SELECTOR

SPEAKERSSPEAKERS

PHONO

GND

ANTENNA

GND

OPTICAL

AV 1

AV 2

COAXIAL

COMPONENT

VIDEO

ZONE2/PRESENCE

COMPONENT

VIDEO

MONITOR OUT

agjihf

pqmo rn

ecb d

En 10

INTRODUCTION

Part names and functions

Front panel display

a HDMI indicator

Lights up during normal HDMI communication when any of the

HDMI1-5 inputs are selected.

OUT 1/OUT 2 indicators

Lights up which outputs audio/video signals from the HDMI OUT

jack (☞

p. 22).

b CINEMA DSP indicator

Lights up when a sound field effect that uses CINEMA DSP

technology is selected.

c ENHANCER indicator

Lights up when the Compressed Music Enhancer mode is turned on

(☞

p. 45).

d CINEMA DSP 3D indicator

Lights up when CINEMA DSP 3D is activated (☞

p. 44).

e Tuner indicator

Light up according to the status of a received station (☞

p. 55).

f SLEEP indicator

Lights up when the sleep timer is on (☞

p. 11).

g ZONE2 indicator

Lights up when the audio output to Zone2 is enabled (☞

p. 104).

h MUTE indicator

Flashes when audio is muted.

i VOLUME indicator

Displays the current volume level.

j Cursor indicators

Light up if corresponding cursors on the remote control are available

for operations.

k Multi information display

Displays a range of information on menu items and settings.

l Speaker indicators

Indicate speaker terminals from which signals are output.

SL SR

SBL SBRSB

Front speaker L

Surround speaker L

Subwoofer

Front speaker R

Surround speaker R

Center speaker

Surround back

speaker L

Surround back

speaker R

Surround back

speaker J1

Presence speaker L

Presence speaker

■ Switching information on the front panel display

The front panel can display sound programs and surround

decoder names as well as the active input source.

Press INFO Key repeatedly to cycle through input source J2

→ sound program → surround decoder in order.

SWSW

SL SR

SBL SBR

STRAIGHT

HDMI1

VOL.

Input source name

Sound program (DSP program)

STEREO

SLEEP

VOL.

TUNED

SL SR

MUTE

ENHANCER

OUT 1 OUT 2

ZONE

SBL SBRSB

jk lj

abcdefihg

1 : “SB” is displayed when using a 6.1-channel configuration only.

2 : During FM/AM reception, the frequency is displayed instead of the input source.

En 11

INTRODUCTION

Part names and functions

Remote control

a Remote control signal transmitter

Transmits infrared signals.

b MAIN/ZONE2

Switches the zone to be operated by the remote control between the

Main zone and Zone2 (☞

p. 104).

c SOURCE A (SOURCE Power)

Switches an external component on and off.

d Input selector

Select an input source on this unit from which to playback.

e Radio control keys

Operates the FM/AM tuner. These keys are used when using the tuner

input.

f INFO

Cycles the information displayed on the front panel display (the name

of the currently selected input source, the sound program, the

surround decoder, the FM/AM tuner frequency, etc.).

g SLEEP

Switches this unit to standby mode automatically after a specified

period of time has elapsed (sleep timer). Press this key repeatedly to

set the time for the sleep timer function.

The SLEEP indicator lights up when the sleep timer is on.

h PART Y

Switches the party mode on and off (☞

p. 104).

i SCENE

Switch the input source and the sound program with a single button

(☞

p. 42). When this unit is in standby mode, press this key to switch on.

j ON SCREEN

Turns on and off the ON SCREEN menu.

k Cursor B / C / D / E, ENTER, RETURN

l External component operation keys

Operate recording, playback, and menu displays etc. for external

components (☞

p. 93). J1

m Numeric keys

Enter numbers.

n TV control keys

Operate a monitor such as a TV.

o CODE SET

Sets remote control codes for external component operations

(☞

p. 94).

p SOURCE/RECEIVER

Switches remote control key function to operate this unit or an

external component (☞

p. 93). Operate an external component when

this key glows green, or this unit when this key glows orange.

q RECEIVER A (RECEIVER Power)

Switches this unit between on and standby mode.

r HDMI OUT

Switches the output jack connected to an HDMI compatible TV (☞

p. 40).

s Sound selection keys

Switch between the sound field effect (sound program) you are using

and the surround decoder (☞

p. 42).

t OPTION

Turns on and off the OPTION menu (☞

p. 50).

u VOLUME +/-

Adjust the volume level (☞

p. 40).

v MUTE

Turns the mute function of the sound output on and off (☞

p. 40).

SCENE

RETURN

VOLUME

ENHANCER

SUR. DECODE

STRAIGHTSLEEP PURE DIRECT

HDMI

AUDIO

1234

125

V-AU X

INFO

MEMORY

PRESET

PART Y

MOVIE MUSIC

DVD

RADIO

MUTE

ENTER

7856

1234

REC

ENT

TV VOL TV CH

TOP

POP-UP

DISPLAY

SOURCE

MAIN

ZONE 2

RECEIVER

CODE SET

INPUT

MUTE

DOCK

HDMI OUT

MULTI

OPTION

ON SCREEN

1234

PHONO

TUNER

TUNING

HDMI1-5 HDMI1-5 jacks

V-AUX Front panel VIDEO AUX jacks

AUDIO1-2 AUDIO1-2 jacks

AV1-6 AV1-6 jacks

MULTI CH INPUT MULTI CH INPUT jacks

DOCK A Universal Dock for iPod/iPhone, iPod wireless

receiver, or Bluetooth wireless audio receiver

connected to the DOCK jack.

TUNER FM/AM tuner

PHONO PHONO jacks

FM Sets the FM/AM tuner band to FM.

AM Sets the FM/AM tuner band to AM.

MEMORY Presets radio stations.

PRESET F / G Selects a preset station.

TUNING H / I Changes tuning frequencies.

Sleep 120min. Sleep 90min.

Sleep 60min.Sleep 30min.Sleep Off

Cursor B / C / D / E Select menu items and change settings when

menus, etc, are displayed.

ENTER Confirms a selected item.

RETURN Returns to the previous screen when menus are

displayed, or close the menu.

1 : You can use lExternal component operation keys for each input source to operate registered components. Remote control codes must be registered for each input

in advance if you want to operate external components (☞

p. 94).

INTRODUCTION

Part names and functions

En 12

On-screen display

When a TV is connected to this unit, the supplied remote control can be used to specify and verify this

unit’s settings via menus and options displayed on the TV screen.

The following displays are available in the on-screen display.

■ Displaying the following menus or viewing the current status of this unit on the

TV screen

• ON SCREEN menu

Press ON SCREEN to display the ON SCREEN menu.

• OPTION menu

Press OPTION to display the OPTION menu.

• Content window

Press Input selector to display the Content window.

ON SCREEN menu

Detailed settings for this unit can be

configured. Use this menu to select desired

settings, change their values, or check the

current status of this unit.

Refer to “SETUP” (☞

p. 66) for details.

OPTION menu

Configure the optional settings for each input

source. Settings such as “Tone Control” and

“Volume Trim” are applied to this unit

regardless of the input source.

Refer to “Configuring settings specific to an

individual input source (OPTION menu)”

(☞

p. 50) for details.

Content window

Includes the Content browse view and the

Now Playing view. The Now Playing view

displays the status of the source from which

music is currently played back. Adjust settings

for music content from the Content browse

view.

Refer to “Confirming and operating input

sources from the Content window” (☞

p. 54)

for details.

En 13

CONNECTIONS

This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and

connections in your listening environment.

Speaker channels and functions

■

Front left and right speakers

The front speakers are used for the front channel sounds (stereo

sound) and effect sounds.

Front speaker layout:

Place these speakers at an equal distance from the ideal listening

position in the front of the room. When using a projector screen,

the appropriate top positions of the speakers are about 1/4 of the

screen from the bottom.

■

Center speaker

The center speaker is for the center channel sounds (dialog, vocals,

etc.).

Center speaker layout:

Place it halfway between the left and right front speakers. When

using a TV, place the speaker just above or just under the center of

the TV with the front surfaces of the TV and the speaker aligned.

When using a screen, place it just under the center of the screen.

■

Surround left and right speakers

The surround speakers are for effect and vocal sounds with the 5.1-

channel speakers providing rear-area sounds. When used with 6.1/

7.1-channel (including surround back channel), sound for right and

left rear-area is output.

Surround speaker layout:

Place the speakers at the rear of the room on the left and right sides

facing the listening position. They should be placed between 60

degrees and 80 degrees from the listening position and with the

speaker tops at a height of 1.5 – 1.8 m from the floor.

■

Presence left and right speakers

The presence speakers are used for front effect sounds. When used

in combination with the sound programs (☞

p. 42), a sound with a

richer and more spatial presence is possible.

Presence speaker layout:

Place the left and right presence speakers 0.5 – 1 m to the outside

of the left and right front speakers respectively. The tops of the

presence speakers should be 1.8 m above the floor.

■

Surround back left and right speakers

Outputs the rear effect. When used with 6.1ch sound, sound from

the left and right sound surround back speakers is mixed and output

from a single speaker. When used with 5.1ch sound, sound from

surround back speakers is distributed between the left and right

surround speakers.

Surround back speaker layout:

When used with 7.1ch sound, arrange the left and right speakers

towards the listening position, to the rear of the listening position.

Arrange the left and right speakers at least 30 cm apart. The same

separation as with the front left and right speakers is optimum.

When used with 6.1ch sound, arrange these to the rear of the

listening position.

■

Subwoofer

The subwoofer speaker is used for bass sounds and low-frequency

effect (LFE) sounds included in Dolby Digital and DTS. Use a

subwoofer that is equipped with built-in amplifier.

Subwoofer speaker layout:

Place it to the outside of the front left and right speakers facing

slightly inward to reduce echoes from the wall.

Connecting speakers

Ex.

CONNECTIONS

Connecting speakers

En 14

Speaker layout

■

Enjoying the 7.1 channel audio source

■ 7.1-channel speaker layout

(7 speakers + subwoofer)

■ Connections of speakers

Connect the speakers to the following jacks according to the

speaker layout. Refer to “Front/Center/Surround/Surround back

speaker and Subwoofer connection” and “Presence speaker

connection” for details on connecting speakers (☞

p. 17).

■ Assigning a speaker configuration

A speaker configuration must be assigned to this unit to activate the

speakers. Use the “Power Amp Assign” function to easily apply the

appropriate speaker settings to this unit according to the speaker

configuration. Speakers for this layout can be activated at the

default “Power Amp Assign” setting (☞

p. 79).

■

Adding the presence speakers for a richer

sound field effect

■ Presence speaker layout

(7 speakers + subwoofer + presence speakers)

■ Connections of speakers

Connect the speakers to the following jacks according to the

speaker layout. Refer to “Front/Center/Surround/Surround back

speaker and Subwoofer connection” and “Presence speaker

connection” for details on connecting speakers (☞

p. 17).

■ Assigning a speaker configuration

A speaker configuration must be assigned to this unit to activate the

speakers. Use the “Power Amp Assign” function to easily apply the

appropriate speaker settings to this unit according to the speaker

configuration. Speakers for this layout can be activated at the

default “Power Amp Assign” setting (☞

p. 79).

Audio from a 7.1-channel audio source can be played back with

no degradation with this speaker configuration.

Speaker jacks FRONT L/R, CENTER, SURROUND L/R,

SURROUND BACK L/R, SUBWOOFER

EXTRA SP jack No used

Front speaker L

Front speaker R

Subwoofer

Center speaker

Surround speaker L

Surround

speaker R

Surround back speaker RSurround back speaker L

30 cm or more

Power Amp Assign 7ch Normal (Default)

This unit automatically selects the presence speakers or

surround back speakers to output sounds according to the

selected sound program.

When the sound program is changed, the speakers that output

the sound are switched between the presence speakers and

surround back speakers automatically.

Front

speaker L

Front speaker R

Subwoofer

Center speaker

Surround speaker L

Surround

speaker R

Presence speaker R

Presence

speaker L

Surround back speaker RSurround back speaker L

30 cm or more

Speaker jacks FRONT L/R, CENTER, SURROUND L/R,

SURROUND BACK L/R, SUBWOOFER

EXTRA SP jack Presence L/R speakers

Power Amp Assign 7ch Normal (Default)

Continues to the

CONNECTIONS

Connecting speakers

En 15

■

Enjoying the 7.1 channel audio source

without surround back speakers

■ 5.1-channel speaker layout

(5 speakers + subwoofer)

■ Connections of speakers

Connect the speakers to the following jacks according to the

speaker layout. Refer to “Front/Center/Surround/Surround back

speaker and Subwoofer connection” and “Presence speaker

connection” for details on connecting speakers (☞

p. 17).

■ Assigning a speaker configuration

A speaker configuration must be assigned to this unit to activate the

speakers. Use the “Power Amp Assign” function to easily apply the

appropriate speaker settings to this unit according to the speaker

configuration. Speakers for this layout can be activated at the

default “Power Amp Assign” setting (☞

p. 79).

■

Using the front speakers that support bi-

amp connections for a high quality sound

■ 5.1-channel speaker layout

(Front speakers (Bi-amp) + 3 speakers)

■ Connections of speakers

Connect the speakers to the following jacks according to the

speaker layout. Refer to “Front/Center/Surround/Surround back

speaker and Subwoofer connection” and “Bi-amp connection” for

details on connecting speakers (☞

p. 17, p. 18).

■ Assigning a speaker configuration

Use the “Power Amp Assign” function which can easily apply the

appropriate speaker settings to this unit according to the speaker

configuration (☞

p. 79).

This unit can mix 7.1-channel audio source down to 5.1-channel

sound. This enables 7.1-channel sound without surround back

speakers.

Speaker jacks FRONT L/R, CENTER, SURROUND L/R,

SUBWOOFER

EXTRA SP jack No used

Front speaker L

Front speaker R

Subwoofer

Center speaker

Surround speaker L

Surround

speaker R

Power Amp Assign 7ch Normal (Default)

Using the front speakers that support bi-amp connections

reproduces a high quality sound.

Front speaker L

(Bi-amp connection)

Front speaker R

(Bi-amp connection)

Center speaker

Surround speaker L

Surround

speaker R

Subwoofer

Speaker jacks FRONT L/R, CENTER, SURROUND L/R,

SURROUND BACK L/R, SUBWOOFER

EXTRA SP jack No used

Power Amp Assign 5ch BI-AMP

Continues to the

CONNECTIONS

Connecting speakers

En 16

■

Using speakers in two rooms (Zone2

function)

■ 7.1-channel speaker layout + Zone2

(7 speakers (in main zone) + subwoofer (in main

zone) + front speakers (in secondary zone))

Main zone

Zone2

■ Connections of speakers

Connect the speakers to the following jacks according to the

speaker layout. Refer to “Front/Center/Surround/Surround back

speaker and Subwoofer connection” and “Multi-zone audio system

using the internal amplifier of this unit” for details on connecting

speakers (☞

p. 17, p. 18).

■ Assigning a speaker configuration

Use the “Power Amp Assign” function which can easily apply the

appropriate speaker settings to this unit according to the speaker

configuration (☞

p. 79).

Front speaker L

Front speaker R

Center speaker

Subwoofer

Surround

speaker R

Surround speaker L

Surround back speaker L Surround back speaker R

30 cm or more

Front

speaker R

Front speaker L

In addition to the main room, speakers in another room can also

be controlled.

When the built-in amplifier for the speakers in another room is

turned on, the speakers that output the sound are switched from

the surround back speakers to the speakers in another room

automatically. J1

Speaker jacks FRONT L/R, CENTER, SURROUND L/R,

SURROUND BACK L/R, SUBWOOFER

EXTRA SP jack Zone2 speakers

Power Amp Assign 7ch + 1ZONE

1 : Sound cannot be output from both the surround back speakers and the speakers

in the second zone at the same time.

CONNECTIONS

Connecting speakers

En 17

Connecting speakers and subwoofer

Connect your speakers to their respective terminals on the rear panel.

■ Front/Center/Surround/Surround back speaker and

Subwoofer connection

■ Presence speaker connection

When using the presence speakers, connect the speakers to the

EXTRA SP jacks as shown in the diagram below.

The presence speakers (PL/PR) that output front effect sounds can

be connected to this unit. With the sound programs (☞

p. 46),

sound with a richer and more spatial presence can be created.

CAUTION

• Remove the AC power cable of this unit from the power outlet before connecting the speakers.

• Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the “+”

(positive, red) terminal on this unit and the speakers, and the other cable into the “–” (negative, black) terminal.

• Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “CHECK SP

WIRES!” will appear on the front panel display when this unit is switched on.

CENTER

SURROUND

SURROUND BACK/

BI-AMP

SINGLE

FRONT

MULTI CH INPUT

DVD

)

HDMI

HDMI 4

HDMI

OUT

NE2

R.BA

SURROUND

SUR.BACK

PRE OU

OOFE

RONT

OUT

+12V

.1A MAX.

ENTE

XTRA

REM

ENTER

LTA

SELECTO

SPEAKERS

NE2

PRE

SubwooferCenter speaker

Front speaker Surround

speaker

Surround back

speaker

RL RL

EXTRA SP

ZONE2/PRESENCE

URROUND BACK/

AMP

URROUND

SUR.BACK

PRE

UBWOOFE

ENTER

VOLTAG

ELE

SPEA

Presence speaker

• Connection of presence speakers is recommended to take full

advantage of the effects of CINEMA DSP sound programs.

• Although you can connect both surround back speakers and

presence speakers to this unit, you cannot output sounds from

those speakers at the same time.

0.5 – 1 m 0.5 – 1 m

PL PR

FL FR

1.8 m 1.8 m

Continues to the

CONNECTIONS

Connecting speakers

En 18

■ Bi-amp connection

This unit can be connected to speakers that support bi-amp

connections. When connecting speakers, connect the FRONT jacks

and the SURROUND BACK/BI-AMP jacks as in the diagram

below. Configure the bi-amp settings to activate connections.

■ Multi-zone audio system using the internal

amplifier of this unit

Connect the speakers in the second zone to the EXTRA SP jacks as

in the diagram below.

■

Changing speaker impedance

This unit is configured for 8 Ω speakers at the factory setting.

When connecting to 6 Ω speakers, carry out the following

procedure to switch to 6 Ω. When this unit is configured for 6 Ω

speakers, 4 Ω speakers can also be used as the front speakers.

Switch this unit to the standby mode.

Press MAIN ZONE A while pressing and holding

STRAIGHT on the front panel.

Release the keys when “ADVANCED SETUP” is displayed on

the front panel display.

After approximately a few seconds, the top menu item is

displayed. J1

NOTES

• Before making bi-amplification connections, remove any

brackets or cables that connect a woofer with a tweeter. Refer to

the instruction manuals of speakers for details. When not making

bi-amplification connections, make sure that the brackets or

cables are connected before connecting the speaker cables.

• If connecting a bi-amp, then surround back speakers cannot be

used.

SINGLE

SURROUND BACK/

BI-AMP

FRONT

CAUTION

The EXTRA SP jacks of this unit should not be connected to a

Passive Loudspeaker Selector Box or more than one loudspeaker

per channel.

Connection to a Passive Loudspeaker Selector Box or multiple

speakers per channel could create an abnormally low impedance

load resulting in amplifier damage. See this owner’s manual for

correct usage.

Compliance with minimum speaker impedance information for all

channels must be maintained at all times. This information is found

on the back panel of this unit.

DOCK

(

)

AUDIO 1

AUDIO 2

(

)

COAXIAL

OPTICAL

VIDEO

HDMI 1

(

BD/DVD

)

HDMI 2 HDMI 3

HDMI 4 HDMI 5

CENTER

SURROUND

SURROUND BACK/

BI-AMP

SINGLE

EXTRA SP

FRONT

OUT

SUBWOOFER

AUDIO

OUT

ZONE2

OUT

SUR.BACK

SURROUND

SUR.BACK

PRE OUT

SUBWOOFER

FRONT

TRIGGER OUT

+12V

0.1A MAX.

FRONT

CENTER

REMOTE

OUT

CENTERSINGLE

HDMI OUT

ARC ARC

SELECTABLE

VOLTAGE

SELECTOR

SPEAKERSSPEAKERS

PHONO

GND

ANTENNA

GND

OPTICAL

COAXIAL

COMPONENT

VIDEO

ZONE2/PRESENCE

COMPONENT

VIDEO

MONITOR OUT

EXTRA SP

ZONE2/PRESENCE

Zone2

PHONES

YPAO MIC

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFOZONE

CONTROL

ZONE2

MAIN ZONE

MEMORY

PRESET

MAIN ZONE A

STRAIGHT

Continues to the

1 : Refer to the “Extended functionality that can be configured as needed

(Advanced Setup menu)” (☞

p. 96) for details on the Advanced Setup menu.

CONNECTIONS

Connecting speakers

En 19

Check that “SP IMP.” is displayed on the front panel.

Press STRAIGHT repeatedly to select a “6ΩMIN.”

Switch this unit to the standby mode, and then

switch it on again.

The power turns on, when the settings you made has been

configured.

■

Connecting speakers

This type of jack can connect to the following speakers or

connection.

Remove approximately 10 mm of insulation from the

ends of the speaker cables, and twist the bare wires

of the cables together firmly so that they will not

cause short circuits.

Loosen the speaker terminals.

Insert the bare wire of the speaker cable into the gap

on the side of the terminal.

Tighten the terminal.

■

Connecting the subwoofer

Connect the subwoofer input jack to the

SUBWOOFER 1 or 2 jack on this unit with an audio

pin cable.

Set the subwoofer volume as follows.

Volume: Set to approximately half volume (or slightly less than

half).

Crossover frequency (if available): Set to maximum.

SPIMP.-8MIN

• Front L/R speakers

• Center speaker

• Surround L/R speakers

• Surround back L/R speakers

• Bi-amp connection (Front speaker L/R speakers)

FRONT

NOTE

After connection, applying this setting to this unit is required to

activate all speaker connections. With using “Power Amp

Assign” function, you can easily apply the speaker

configuration.

Refer to “Power Amp Assign” (☞

p. 79) for details on using

“Power Amp Assign” function.

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Subwoofer examples

CONNECTIONS

En 20

Cable plugs and jacks

This unit is equipped with the following input/output jacks. Use jacks and cables appropriate for

components that you are going to connect.

■

Audio/Video jacks

HDMI jacks

Digital video and digital sound are transmitted through a single jack.

Only use an HDMI cable.

■

Analog video jacks

■

Audio jacks

Connecting external components

• Use a 19-pin HDMI cable with the HDMI logo.

• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.

• When a TV that supports HDMI functions and Audio Return Channel function is connected, audio

output from the TV can be input to this unit (☞

p. 101).

• When a player and TV that support the 3D video format are connected to this unit, 3D content can be

played back.

• If you connect this unit to a component that has a DVI jack, an HDMI/DVI-D cable is required.

COMPONENT VIDEO jacks

The signal is separated into three components:

luminance (Y), chrominance blue (P

B), and chrominance red (PR).

Use component video pin cables with three plugs.

HDMI cable

Component video pin cable

VIDEO jacks

These jacks transmit conventional analog video

signals.

Use video pin cables.

OPTICAL jacks

These jacks transmit optical digital audio signals.

Use fiber-optic cables for optical digital audio

signals.

COAXIAL jacks

These jacks transmit coaxial digital audio signals.

Use pin cables for digital audio signals.

AUDIO jacks

These jacks transmit conventional analog audio

signals.

Use stereo pin cables, connecting the red plug to

the red R jack, and the white plug to the white L

jack.

Video pin cable

Digital audio fiber-optic cable

Digital audio pin cable

Stereo pin cable

CONNECTIONS

Connecting external components

En 21

Connecting a TV monitor

This unit is equipped with the following three types of output jack for connection to a TV.

HDMI OUT 1-2, COMPONENT VIDEO or VIDEO. Select the proper connection according to the

input signal format supported by your TV.

When connecting to an HDMI compatible TV

Video signal such as component video and video received by this unit is converted to HDMI and output to

the TV. Just select HDMI input on the TV to view video from any external source connected to this unit. J1

When connecting to a non-HDMI compatible TV

Connect to the TV using the same type of connection that you used to connect to the external

component, and change the inputs on your TV to match that of the external component you are using

for playback. If the external component and TV are equipped with different types of analog video

jacks, this unit will convert the video signal to component video signal, or vice-versa, according to the

type of video input jacks used by the TV. J2, J3

HDMI OUT

ARC ARC

SELECTABLE

COMPONENT

VIDEO

MONITOR OUT

OCK

VIDE

HDMI

(

)

HDM

TRI

OUT

MAX

OUT

ANTENNA

NEN

VIDE

HDMI OUT 1-2 jacks

COMPONENT VIDEO jacks

(MONITOR OUT)

VIDEO jack

(MONITOR OUT)

HDMI

COMPONENT

VIDEO

HDMI

VIDEO

Input Output

HDMI input

Through

Converted

COMPONENT

VIDEO

HDMI

VIDEO

COMPONENT

VIDEO

HDMI

VIDEO

Input Output

Video input

Through

Component

video input

Converted

1 : You can change the resolution and aspect ratio when converting to HDMI to suit your requirements (☞p. 85).

2 : Set “Analog to Analog Conversion” to “On” (☞p. 84).

3 : Analog to analog conversion is available only for 480i/576i-resolution video signal.

CONNECTIONS

Connecting external components

En 22

■

Connecting an HDMI video monitor

Connect the HDMI cable to one of the HDMI OUT 1-2 jacks.

■

Connecting a component video monitor

Connect the component video cable to the COMPONENT VIDEO (MONITOR OUT) jacks.

■

Connecting a video monitor

Connect the video pin cable to the VIDEO (MONITOR OUT) jack.

• Use a 19-pin HDMI cable with the HDMI logo.

• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.

• When a TV that supports the HDMI function and Audio Return Channel function is connected, audio

output from the TV can be input to this unit (☞

p. 101).

• When a player and TV that support the 3D video format are connected to this unit, 3D content can be

played back.

• This unit is equipped with HDMI OUT 1 and 2 jacks. The active HDMI OUT jack(s) can be selected

(☞

p. 40). The active HDMI OUT jack(s) can be registered with the SCENE function (☞p. 42).

HDMI OUT

ARC ARC

SELECTABLE

(

)

AV 3

AV 4

AV 5

AV 6

AUDIO 1

AUDIO 2

MULT

(

)

AXIAL

PTICAL

IDEO

HDMI 1

(

DVD

)

OUT

URRO

TRI

FRON

PHONO

ANTENNA

PTI

AV 1

AV 2

AXIA

NEN

IDEO

COMPONEN

VIDE

NIT

HDMI

HDMI input

Projector

COMPONENT

VIDEO

DOC

(

)

AV 3

AV 4

AV 5

AV 6

AUDI O 1

AUDIO 2

MULT

(

)

AXIA

PTI

IDE

HDMI 1

(

DVD

)

OUT

DMI OUT

ARC

ELECTABLE

PHON

ANTENNA

PTICAL

AXIAL

COMPONEN

VIDE

IDE

COMPONENT

VIDEO

Component video input

DOC

(

)

AV 3

AV 4

AV 5

AV 6

AUDIO 1

AUDI O 2

MULT

(

)

AXIA

PTI

IDE

HDMI 1

(

DVD

)

HDMI

RC AR

ELECTABL

PHON

ANTENNA

PTICAL

AXIAL

COMPONEN

IDE

NEN

VIDE

NIT

VIDEO

Video input

1 : When connecting to a TV that supports HDMI input, the video signal for the COMPONENT VIDEO/VIDEO jacks is

converted and output from HDMI OUT 1-2 jacks. When connecting to a TV via the HDMI jack, you do not need to use these

jacks.

En 23

CONNECTIONS

Connecting external components

■ Listening to TV audio

To transmit sound from the TV to this unit, connect as followings according to the TV:

When using a TV that supports the Audio Return Channel function and HDMI

Control function

When your TV supports both HDMI Control (e.g., Panasonic VIERA Link) and Audio Return

Channel functions, audio/video output from the unit to the TV and audio output from the TV to the

unit are possible using a single HDMI cable.

The input source is switched automatically to match operations carried out on the TV, and that

makes TV sound control easier to use.

For the connections and settings, refer to “Single HDMI cable input to TV audio with Audio Return

Channel function” (☞

p. 101).

When using a TV that supports the HDMI Control functions

When using a TV that supports HDMI Control functions (e.g., Panasonic VIERA Link), if HDMI

Control functions are enabled on the unit, then input source can be switched automatically to match

operations carried out on the TV.

For the connections and settings, refer to “Switching the input source on this unit automatically

when listening to TV audio” (☞

p. 100).

When using other TVs

To transmit sound from the TV to this unit, connect AV1-6 or AUDIO1-2 jacks to the TV’s audio

output jacks.

Select the input source connected via TV’s audio output jack to enjoy the TV sound.

If the TV supports optical digital audio output, we recommend that you connect the TV audio output

to the receiver’s AV4 jack.

Connecting to AV4 allows you to switch the input source to AV4 with just a single key operation

using the SCENE function (☞

p. 42).

You can control your TV using the receiver’s remote control by entering the TV’s remote control

code (☞p. 94).

TV audio output Connection

Optical digital audio output Connect to the OPTICAL jack of the AV1 or AV4 with a fiber-optic cable.

Coaxial digital audio output Connect to the COAXIAL jack of the AV2 or AV3 with a digital audio pin

cable.

Analog stereo output Connect to one of the AV5, AV6, AUDIO1, or AUDIO2 with a stereo pin

cable.

(

)

AV 4

AV 5

AV 6

AUDI O

(

)

COAXIAL

OPTICAL

AV 1

AV 2

COAXIAL

DOCK

MULT

IDE

DMI 1

(

)

URR

TRI

OUT

DMI OU

ELE

TABL

ANTENNA

COMPONENT

IDE

NENT

VIDE

IDE

MONITOR OU

OPTICALCOAXIALAUDIO

Audio output

(Optical, coaxial, or analog)

Available input jacks

CONNECTIONS

Connecting external components

En 24

Connecting BD/DVD players and other devices

This unit has the following input jacks. Connect them to the appropriate output jacks on

the playback devices such as BD/DVD players.

■

Connecting BD/DVD players and other devices with

HDMI

Connect the device with an HDMI cable to one of the HDMI1-5 jacks. The HDMI IN

jack on the front panel can also be used.

Select the HDMI input (HDMI1-5 or VIDEO AUX) that the playback device is

connected to for playback.

ENTER

ON SCREEN

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

jON SCREEN

kCursor B / C / D / E

kENTER

Input Video input Audio input

HDMI1 HDMI HDMI

HDMI2 HDMI HDMI

HDMI3 HDMI HDMI

HDMI4 HDMI HDMI

HDMI5 HDMI HDMI

AV1 Component video Optical digital

AV2 Component video Coaxial digital

AV3 Video Coaxial digital

AV4 Video Optical digital

AV5 Video Analog (Stereo)

AV6 Video Analog (Stereo)

AUDIO1 — Analog (Stereo)

AUDIO2 — Analog (Stereo)

VIDEO AUX HDMI/Video HDMI/Analog (Stereo)

PHONO — Analog (for turntable connection only)

(

BD/DVD

)

AV 5

AV 6

AUDIO 1

AUDIO 2

MULTI CH INPUT

ENTER

SURROUN

RONT

UBW

OUT

UR.BA

URR

UND

URROUN

SUR.BA

FRONT

RIGGER OUT

+12

MAX.

CENTER

REM

INGL

DMI

ELE

TABLE

NTENN

NEN

VIDE

IDE

ONITOR OUT

HDMI

HDMI output

BD/DVD player

■ Receiving video signals from the HDMI jack and audio signals

from a jack other than HDMI

This unit can use the AV1-6 or AUDIO1-2 input jacks to receive audio signals from

other input jacks.

For example, if a playback device cannot produce audio signals from an HDMI jack,

use the following method to change the audio input.

Press jON SCREEN to display the ON SCREEN menu.

Press kCursor B / C repeatedly to select “Input,” and then press

kENTER. J1

Press kCursor D / E repeatedly to select the desired HDMI input

source, and then press kCursor B.

Press kCursor C repeatedly to select “Audio In,” and then press

kENTER.

Press kCursor B / C to select the audio input source.

Once you have completed the setup, press jON SCREEN to close

the menu.

1 : Refer to the “Configuring input sources (Input menu)” (☞p. 66) for details on selecting the input source.

(

BD/DVD

)

OPTICAL

DOCK

(

)

AV 3

AV 4

AV 5

AV 6

AUD

MULTI CH IN

(

)

COAXIA

OPTICAL

IDE

TRI

+12V

.1A MA

REMOTE

OUT

DMI OUT

ELE

TABL

ANTENNA

AV 2

COAXIA

COMPONEN

IDE

NENT

VIDE

IDE

NIT

HDMI

OPTICAL

HDMI

HDMI/Audio (Optical)

output

BD/DVD player

En 25

CONNECTIONS

Connecting external components

■

Connecting BD/DVD players and other devices with component

video cables

Connect the device with a component video cable to one of the AV1-2 input jacks.

Using optical digital audio output sources

Select the AV1 input to which the playback device is connected for playback.

Using coaxial digital audio output sources

Select the AV2 input to which the playback device is connected for playback.

OPTICAL

COMPONENT

VIDEO

DOCK

(

)

AV 3

AV 4

AV 5

AV 6

AUDIO 1

AUDIO 2

MULT

(

)

AXIA

PTI

VIDE

HDMI 1

(

)

HDMI

OUT

ELE

TABL

HON

GND

ANTENNA

AV 2

COAXIA

NENT

IDE

VIDE

NIT

COMPONENT

OPTICAL

Component video / Audio (Optical)

output

BD/DVD player

COAXIAL

DOC

(

)

AV 3

AV 4

AV 5

AV 6

AUDIO 1

AUDIO 2

MULT

(

)

AXIA

PTI

IDE

HDMI 1

(

DVD

)

OUT

HDMI

OUT

ELE

TAB L

PHON

ANTENNA

PTICAL

COMPONEN

IDE

NEN

VIDE

IDEO

NIT

COMPONENT

VIDEO

COAXIAL

Component video / Audio (Coaxial)

output

BD/DVD player

■ Component connections to analog audio output devices

The video input from the AV1-2 jacks can be used in combination with the audio input from other

AV inputs or AUDIO1-2.

When connecting these devices, select the AV input jacks or the AUDIO1-2 jacks as the audio input

for AV1 or AV2. Refer to “Receiving video signals from the HDMI jack and audio signals from a

jack other than HDMI” (☞

p. 24) for detailed setup guidance.

For playback of the connected device, select the AV input source (AV1-2) to which the device is

connected with the component video cable.

COMPONENT

VIDEO

OCK

(

)

AUD

IO 2

ULTI CH

(

)

COAXIA

PTI

VIDE

HDMI 1

(

)

OUT

SURROUND

TRI

+12V

MAX

RON

REMOTE

OUT

DMI

OUT

ELE

TABLE

ANTENNA

PTI

AXIA

NEN

IDE

VIDE

NIT

OUT

AUDIO

COMPONENT

VIDEO

Component video / Audio

output

Game console

En 26

CONNECTIONS

Connecting external components

■

Connecting BD/DVD players and other devices with video cables

Connect the playback device with a video pin cable to one of the AV3-6 input jacks.

Using optical digital audio output sources

Select the AV4 input to which the playback device is connected for playback.

Using coaxial digital audio output sources

Select the AV3 input to which the playback device is connected for playback.

Using analog stereo audio output sources

Select the AV5 or AV6 input to which the playback device is connected for playback.

OPTICAL

DOCK

AV 3

AV 5

AV 6

AUDI O 1

AUDIO 2

MULT

(

)

AXIA

VIDE

HDMI 1

(

)

TRI

DMI OUT

ARC

SELECTABLE

GND

ANTENNA

PTICA

AXIA

COMPONEN

VIDE

NEN

IDE

VIDE

NIT

OUT

VIDEO

OPTICAL

Video / Audio (Optical)

output

BD/DVD player

(

)

COAXIAL

VIDEO

(

)

AV 4

AV 5

AV 6

AUDIO 1

AUDI O 2

MULT

PTI

HDMI 1

(

DVD

)

DMI OUT

ARC

ELECTABLE

PHONO

ANTENNA

OPTICA

AXIAL

OMPONENT

IDEO

NEN

VIDE

VIDEO

NIT

VIDEO

COAXIAL

Video / Audio (Coaxial)

output

BD/DVD player

(

)

AV 3

AV 4

AV 6

AUDI O 1

AUDI O 2

MULT

(

)

AXIAL

PTI

IDE

HDMI 1

(

DVD

)

TRI

DMI

1 2

ARC

ELECTABLE

PHONO

ANTENNA

OPTICA

AXIAL

OMPONENT

IDEO

NEN

VIDE

VIDEO

NIT

AUDIO

VIDEO

Video / Audio

output

BD/DVD player

En 27

CONNECTIONS

Connecting external components

■

Connecting CD players and other audio devices

Using analog stereo output sources

Select the audio input (AUDIO1-2) to which the playback device is connected for playback.

Using optical digital output sources

Select the AV input (AV1 or AV4) to which the playback device is connected for playback.

Using coaxial digital output sources

Select the AV input (AV2 or AV3) to which the playback device is connected for playback.

■

Connecting a turntable

Connect the audio output of the turntable to PHONO jacks of this unit. J1

(

)

AV 3

AV 4

AV 5

AV 6

MULT

(

)

AXIAL

PTI

IDE

HDMI 1

(

DVD

)

DMI

ARC

ELECTABLE

PHONO

ANTENNA

OPTICA

AXIAL

OMPONENT

IDEO

NEN

VIDE

IDEO

NIT

AUDIO

Audio output

CD player

OPTICAL

AV 3

AV 5

AV 6

AUDIO 1

AUDI O 2

MULT

(

)

AXIAL

IDE

HDMI 1

(

DVD

)

HDMI

OUT

ELE

TABL

PHONO

ANTENNA

AV 2

OAXIAL

OMPONENT

IDEO

NEN

VIDE

VIDEO

NIT

OPTICAL

CD player

Audio (Optical) output

We recommend connecting audio devices with a coaxial digital output to the AV3 coaxial digital jack on this unit.

This connection allows you to switch to the AV input 3 just by pressing the “CD” SCENE key (☞

p. 42).

Connect your turntable to the GND terminal of this unit to reduce noise in the signal.

(

)

COAXIAL

DOCK

(

)

AV 4

AV 5

AV 6

AUDI O 1

AUDI O 2

MULT

PTI

IDE

DMI 1

(

DVD

)

SURRO

RIG

FRON

DMI

ARC

ELECTABLE

ANTENNA

PTI

AV 1

NENT

IDE

NEN

VIDE

IDE

ONITOR OUT

COAXIAL

Audio (Coaxial) output

CD player

GND

OCK

(

)

AV 3

AV 4

AV 5

AV 6

AUDI O 1

AUDI O 2

MULT

(

)

COAXIA

PTI

IDE

DMI 1

(

DVD

)

RIG

DMI

ELE

TAB L

ANTENNA

GND

PTI

AV 1

AV 2

OAXIAL

NENT

IDE

NEN

VIDE

IDEO

NIT

AUDIO

Audio output

Turntable

1 : When connecting a turntable with a low-output MC cartridge to the PHONO jacks, use an in-line boosting transformer or MC-head amplifier.

En 28

CONNECTIONS

Connecting external components

Connecting game consoles

Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as a game console to

the receiver.

Select the V-AUX input to use these connected devices.

■

When connecting an HDMI compatible device

Connect the HDMI output of the device to the HDMI IN jack of this unit.

■

When connecting an non-HDMI compatible device

Connect the video and audio outputs of the device to the VIDEO and AUDIO jacks of this unit.

Connecting a multi-format player or an external decoder

This unit has 8 sets of input jacks (FRONT L/R, CENTER, SURROUND L/R, SUR. BACK and

SUBWOOFER) to input multi-channel analog sound signals. If your playback component, such as a

DVD player or SACD player, has multi-channel analog output capability, you can enjoy up to 7.1-

channel multi-channel sound. To output multi-channel sound, connect the audio output jacks of your

playback component to the MULTI CH INPUT jacks of this unit, and set the input source of this unit to

“MULTI CH.”

• Be sure to turn down the volume when connecting this unit and the other devices.

• When both the HDMI connection and the analog video/audio connection are performed between the

HDMI compatible device and this unit, only the HDMI signal will be input.

VIDEO

AUX

STRAIGHT

RADIO

VIDEO

AUDIO

HDMI IN

HDMI

HDMI output

Game console

VIDEO

AUX

STRAIGHT

RADIO

VIDEO

AUDIO

HDMI IN

AUDIO

VIDEO

Video output

Analog audio output

Game console

• When you select “MULTI CH” as the input source, the digital sound field processor and tone control are

automatically disabled.

• Since this unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for

missing speakers, connect at least a 5.1-channel speaker system when using this feature.

• When the input source is switched to “MULTI CH,” images input from a component connected to the

HDMI1-5, AV1-6, or VIDEO AUX jacks can be displayed on a video monitor (☞

p. 69). If your DVD

player does not support multi-channel digital output, connect it to these input jacks.

TI CH INPUT

SUBWOOFER

SUR.BACK

SURROUND

FRONT

CENTER

RL RL RL

Surround out

Front out

Subwoofer out

Center out

Multi-format player/External decoder

(7.1-channel output)

Surround back out

En 29

CONNECTIONS

Connecting external components

Connecting an external amplifier

The same channel signals are output from the jacks of the PRE OUT terminals as from their

corresponding SPEAKERS terminals. When connecting an external power amplifier (pre-main

amplifier) to enhance speaker output, connect the input terminals of the power amplifier to the PRE

OUT terminals of this unit.

Connecting a SCENE link playback-compatible device

When the components are the Yamaha products and have the capability of the transmission of the

remote control signals, connect the REMOTE IN and REMOTE OUT jacks to the remote control input

and output jack with the monaural analog mini cable as follows.

NOTE

When a component is connected to the PRE OUT terminals, do not connect speakers to the

SPEAKERS terminals corresponding to those PRE OUT terminals.

a FRONT (PRE OUT) jacks

Front channel output jacks.

b SURROUND (PRE OUT) jacks

Surround channel output jacks.

c SUR. BACK (PRE OUT) jacks

Surround back output jacks. When you only connect one external amplifier for the surround back channel,

connect it to the SUR. BACK (SINGLE) jack.

d SUBWOOFER (PRE OUT) 1/2 jack

Connect a subwoofer with a built-in amplifier. When two subwoofers are connected, the same sound is

output from them.

e CENTER (PRE OUT) jack

Center channel output jack.

SURROUND

SUR.BACK

PRE OUT

SUBWOOFER

FRONT

CENTERSINGLE

abc d e

• When a Yamaha component that supports the SCENE link playback function is connected via the

REMOTE OUT jack, playback begins automatically when the SCENE function is used (☞

p. 42).

• If the component connected to the REMOTE OUT jack is not a Yamaha product, set “SCENE IR” in the

SCENE menu to “Off” (☞

p. 71).

OUT

(

)

AV 3

AV 4

AV 5

AV 6

AUDIO 1

AUDI O 2

MULTI CH INPUT

(

)

AXIAL

OPTICA

VIDEO

HDMI 1

(

)

HDMI 2

HDMI

OUT

FER

OUT

SUR.BACK

URROUN

TRI

OUT

12V

.1A MAX.

FRON

ENTE

HDMI

ARC

SELECTABL

HONO

ANTENNA

AV 2

AXIA

COMPONEN

IDE

VIDE

NIT

OUT

Remote control out

Remote control in

Infrared signal receiver or

Yamaha component

(CD or DVD player, etc.)

En 30

CONNECTIONS

Connecting external components

Using the Trigger function to link external component power

When this unit is connected to a Yamaha subwoofer that supports the system connection or the

component with TRIGGER IN jack, you can turn on and off the component by using this unit.

■

When connecting a Yamaha subwoofer

■

When connecting a component with the TRIGGER IN jack

Connecting audio/video recording devices

This receiver can transmit selected incoming analog audio/video signals to external components

through the AV OUT and AUDIO OUT jacks. You can record these input audio and video signals to

VCRs or similar devices, or send them to other TVs or external components.

Using the AV OUT jacks

Connect this jacks to the external component’s video input jack and analog audio input jacks.

Using the AUDIO OUT jacks

Connect this jack to the external component’s analog audio input jacks.

Functions of the TRIGGER OUT jack can be specified (☞

p. 90).

+12V

0.1A MAX.

(

)

AV 3

AV 4

AV 5

AV 6

AUDIO 1

AUDIO 2

MULTI CH INPUT

(

)

AXIA

PTI

IDE

HDMI 1

(

DVD

)

HDMI 2

HDMI

OUT

UDIO

R.BA

ENTER

EMOTE

DMI

ARC

SELECTABL

PHON

ANTENNA

NEN

VIDE

IDEO

NIT

System connection input

Yamaha subwoofer

that supports the system

connection

+12V

0.1A MAX.

(

)

AV 3

AV 4

AV 5

AV 6

AUDIO 1

AUDIO 2

MULTI CH INPUT

(

)

AXIA

PTI

IDE

HDMI 1

(

DVD

)

HDMI 2

HDMI

OUT

UDIO

R.BA

ENTER

EMOTE

DMI

ELE

TABL

PHON

ANTENNA

NEN

VIDE

IDEO

NIT

TRIGGER IN

Trigger input

Component with the

TRIGGER IN jack

(Power amplifier or

DVD player, etc.)

HDMI audio/video signals, component video signals, and digital audio signals cannot be transmitted

from these jacks.

OUT

AUDIO

OUT

DOC

(

)

AV 3

AV 4

AV 5

AV 6

AUDI O 1

AUDIO 2

MULTI CH INPUT

(

)

AXIA

PTICAL

IDE

HDMI 1

(

DVD

)

HDMI 2

HDMI

UR.BAC

SURROUND

+12

0.1A MAX

FRON

ENTER

REMOTE

DMI

ELE

TABLE

PHON

NTENN

PTICAL

AV 1

AV 2

AXIAL

COMPONEN

IDE

OMPONEN

VIDE

IDE

NIT

AUDIO

VIDEO

AUDIO

Audio recorder

Audio input

VCR

Video / Audio

input

CONNECTIONS

En 31

An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas

properly to their respective jacks.

Assembling the AM loop antenna

Connecting the FM/AM antennas

ANTENNA

GND

VIDEO

HDMI 1

(

)

HDMI 2

HDMI

TRI

OUT

+12V

.1A MAX.

REMOTE

HDMI

OUT

ELE

TABL

PHONO

OMPONEN

IDEO

COMPONEN

VIDE

NIT

Indoor FM antenna

AM loop antenna

Position the AM antenna away from the receiver. The

wires of the AM antenna have no polarity.

You can connect either wire to the AM jack or the

GND jack.

Connecting the AM loop antenna

ReleaseInsertPress and hold

■ Improving FM reception

We recommend using an outdoor antenna. For more information, consult the nearest authorized

dealer.

■ Improving AM reception

Connect this unit to an outdoor antenna with a 5 – 10 m vinyl-coated wire. Make sure the AM loop

antenna is still connected.

Connecting the GND jack can reduce noise. Connect the jack to a store-bought ground bar or copper

plate with a vinyl-covered wire and bury this new attachment in moist ground.

The GND jack is not to be connected to the ground socket of an electrical outlet.

CONNECTIONS

En 32

This unit is equipped with a Yamaha Parametric Room Acoustic Optimizer (YPAO) that adjusts the status, size, and volume balance of the speakers in order to provide an optimal sound field. Using

YPAO allows you to automatically configure settings, such as adjusting speaker output and acoustic parameters to suit your listening room (the room in which this unit is placed). J1

Check the following before using YPAO.

This unit

• The headphones are removed.

• This unit is connected to the TV correctly.

• The power is turned on.

• The video input to which the video output from this unit has been

selected.

Subwoofer

• The power is turned on.

• Volume is set to approximately half, and the cross-over frequency (if

present) is set to maximum.

Place the supplied YPAO microphone at ear height in

your listening position.

Face the head of the YPAO microphone upwards.

Switch this unit on.

Setting up the speaker parameters automatically (YPAO)

The amount of time for measurement varies from about two to

ten minutes according to settings. Be aware of the following

when using YPAO.

• The test tone is output at high volume. Refrain from using this

function at night when it may be a nuisance to others.

• Take care that the test tone does not frighten small children.

YPAO operations can be viewed on the front panel display or

TV screen.

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Subwoofer examples

When positioning the microphone, we recommend that you use

equipment that allows you to adjust the height (such as a tripod)

as a microphone stand. When using a tripod, use the tripod

screws to fix the microphone in place.

YPAO microphone

Continues to the

1 : When you have changed the number of speakers or the locations in which they

are installed, first use YPAO to adjust the speaker balance.

CONNECTIONS

Setting up the speaker parameters automatically (YPAO)

En 33

Connect the YPAO microphone to the YPAO

MIC jack on the front panel.

“Mic On. View ON SCREEN” appears on the front

panel display, and the following display appears on the

front panel display or TV screen.

Press kCursor B / C to select the “Multi

Position” and press kENTER to set the

number of listening positions to measure.

To measure at the multiple listening positions (up to 8),

press

kCursor B / C to select “Yes” and press

kENTER.

To measure at one listening position, press

kCursor B / C to select “No” and press kENTER.

kCursor B / C

kENTER

ENTER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

REE

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

PHONES

YPAO MIC

SILENT

CINEMA

TONE

CONTROL

DVD

PROG

SCE

VOL.

SL SR

SBL SBR

ENTER to Start

YPAO

VOL.

“Multi Position” is set to “Yes” at initial factory

settings. It is not necessary to perform step 5 when

measuring at the multiple listening positions.

VOL.

MLT.Position>

YPAO

VOL.

This completes preparation. To achieve more accurate

results, take note of the following when measuring

acoustics.

• It takes a few minutes to accurately measure acoustics

for one position. Keep the room as quiet as possible

while acoustics are measured.

• Wait in a corner of the room, or leave it entirely, while

acoustics are measured to avoid creating an

obstruction between the speakers and the YPAO

microphone.

Continues to the

CONNECTIONS

Setting up the speaker parameters automatically (YPAO)

En 34

Press kCursor B / C repeatedly to select

the “Measure” and press kENTER to start

measurement.

Auto measurement starts in 10 seconds.

Display during measurement

When “Multi Position” is set to “No” in step 5

The following display appears when measurement

finishes without any problems.

Go to step 8.

When “Multi Position” is set to “Yes” in step 5

The following display appears when measurement at the

first position finishes without any problems.

Go to step 7.

Replace the optimizer microphone at your

choosing position and press kENTER to

restart the automatic measurement.

Auto measurement restarts in 10 seconds.

Repeat step 7 until the measurement at all listening

positions are made.

kCursor B / C

kENTER

kRETURN

RETURN

ENTER

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLA

AIN

NE 2

EIVE

ODE SE

MUTE

OPTION

REE

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

UNING

• To start the measurement immediately, press

kENTER again.

• To cancel the automatic setup and return to the

previous screen, press

kRETURN and then

kENTER.

SL SR

SBL SBR

Progress 0%

YPAO

VOL.

SL SR

Save/Exit

YPAO

VOL.

SL SR

>Yes No

YPAO

VOL.

The following illustration shows how to place the

optimizer microphone to optimize the setup of this

unit for seven listening positions for example.

6 7

4 5

12 3

Continues to the

CONNECTIONS

Setting up the speaker parameters automatically (YPAO)

En 35

The following display appears again when

measurement at the last position finishes without any

problems.

Press kCursor B / C to select “Save/Exit”

and press kENTER.

Press kCursor D / E to select “SAVE”

and press kENTER.

Press kENTER.

YPAO is automatically terminated. Disconnect the

YPAO microphone.

kCursor B / C / D / E

kENTER

ENTER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

REE

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

NOTE

If a problem occurs, an error message or report is

displayed either during or after acoustic measurement.

Refer to “When an error message is displayed during

measurement” (☞

p. 37), or “When a warning

message is displayed after measurement” (☞

p. 37) to

resolve the problem and measure acoustics with

YPAO again.

Result Displays the results of automatic

acoustics measurement. Refer to

“Reviewing and reloading automatic

setup parameters” for details (☞p. 36).

Save/Exit Applies the result to the speaker setup and

finishes the automatic measurement.

VOL.

SL SR

Save/Exit

YPAO

VOL.

SL SR

Select:Save

YPAO

VOL.

SL SR

Disconnect Mic

YPAO

VOL.

The YPAO microphone is sensitive to heat. When you

have finished measuring, store the microphone out of

direct sunlight, and away from locations that may

experience high temperatures, such as on top of AV

equipment.

CONNECTIONS

Setting up the speaker parameters automatically (YPAO)

En 36

■

Reviewing and reloading automatic

setup parameters

The results of automatic acoustics measurement can be

reviewed once measurement is complete. Automatic

setup parameters can also be reloaded if you are not

satisfied with manually configured speaker setup and

sound adjustments.

Press kCursor B / C repeatedly to select

“Result” and press kENTER immediately

after the automatic measurement.

The results of acoustics measurement are displayed.

List of menu items

Menu items available in the Result menu are displayed.

b Number of measurement

Indicates the number of measurements for multiple

listening positions.

c Diagram

Shows the speaker setup and sound adjustment as diagram.

d Message

Displays warning or error messages.

Select the desired menu item (or enable a

function) using kCursor B / C / D / E and

kENTER.

Press kRETURN to finish “Result” menu.

Cursor B / C / D / E

kENTER

kRETURN

RETURN

ENTER

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLA

AIN

NE 2

EIVE

ODE SE

MUTE

OPTION

REE

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

UNING

NOTE

When automatic setup parameters are reloaded,

manually configured settings are cleared. To save

manually configured settings before reloading

automatic setup parameters, see “Prohibiting setting

changes” (☞

p. 91).

The “Result” menu can also be viewed from the

display shown after the YPAO microphone is

connected.

Wiring Displays the polarity of each connected

speaker.

• “Normal” is displayed when the

polarity of the connected speaker is

normal.

Size Displays the size of the connected

speakers.

• “Large” is displayed when the

connected speaker has the ability to

reproduce the low-frequency signals

effectively.

• “Small” is displayed when the

connected speaker does not have the

ability to reproduce the low-frequency

signals effectively.

Distance Displays the distance from the listening

position to speakers. The unit for distance

can be switched between “ft” (feet) and

“m” (meter) by pressing kCursor D / E.

Level Displays the result of the adjustment of

each connected speaker output level.

Setup Reload Applies “Result” menu settings to this

unit.

CONNECTIONS

Setting up the speaker parameters automatically (YPAO)

En 37

■

When an error message is

displayed during measurement

See “Error messages” (☞p. 38) for instructions on

resolving the problem and measure acoustics again.

Check the error code displayed and use YPAO to

measure acoustics again as described below.

When “E-1,” “E-2,” “E-3,” “E-4” or “E-6” is

displayed

Press kENTER.

Press kCursor E to select “EXIT.”

Press kENTER to terminate YPAO, and

switch the unit to standby mode.

Check that the speakers are properly

connected.

Turn on the unit and use YPAO again.

When “E-5,” “E-7,” “E-8” or “E-9” is displayed

Press kENTER.

Check that the environment is suitable for

accurate measurement.

Press kCursor E to select “RETRY.”

Press kENTER to use YPAO again.

When “E-10” is displayed

Press kENTER.

Press kCursor E to select “EXIT.”

Press kENTER to terminate YPAO.

Switch the unit to standby mode.

Turn on the unit and use YPAO again.

■

When a warning message is

displayed after measurement

See “Warning messages” (☞p. 39) for instructions on

resolving the problem. The speaker causing the problem

can be confirmed from the TV screen display.

To exit YPAO with some options

Use kCursor B / C to select “Save/Exit”

and press kENTER.

Use kCursor D / E to select one of the

following options and press kENTER.

SAVE:

Exits YPAO applying the results of measurement.

CANCEL:

Returns to the previous screen (warning message

screen).

EXIT:

Exits YPAO without saving the results.

kCursor B / C / D / E

kENTER

ENTER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

REE

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

NOTE

Although the results of acoustics measurement can be

applied when a warning message is displayed, optimal

sound will not be achieved. Resolving the problem

and using YPAO to measure acoustics again is

recommended.

CONNECTIONS

Setting up the speaker parameters automatically (YPAO)

En 38

■

Message list

■ When a warning message is displayed before

measurement

■ Error messages

NOTE

If the following messages appear, resolve the problems that have

occurred and carry out the measurement process again.

Connect MIC! The YPAO microphone is

not connected.

Connect the YPAO

microphone to the YPAO

MIC jack on the front

panel.

Unplug HP! The headphones are

connected.

Remove the headphones.

Memory Guard! The settings of this unit

are protected.

Set “Memory Guard” in

the Setup menu to “Off”

(☞p. 91).

E-1:

No Front SP

The unit was not able to

find the front channel.

Check that the left and

right front speakers are

connected correctly.

E-2:

No Sur. SP

The unit was only able to

find one of side of the

surround channels.

Check that the left and

right surround speakers

are connected correctly.

E-3:

No F.PRNS SP

The unit was only able to

find one of side of the

presence channels.

Check that the left and

right presence speakers

are connected correctly.

E-4:

SBR→SBL

Only one surround back

speaker is connected and

only the right side

surround back channel

sound is detected.

When only one surround

back speaker is

connected, connect to the

left side (SINGLE)

terminal.

E-5:

Noisy

The noise is too loud,

preventing accurate

measurements from

being taken.

Measure again in quiet

surroundings. Turn off any

devices in the room that

may be emitting noise, or

place them further away

from the YPAO

microphone.

When this message is

displayed, selecting

“PROCEED” will allow

you to continue measuring.

However, we recommend

resolving the problem and

measuring again, as

continuing measurement

without doing so will not

give accurate results.

E-6:

Check Sur.

Even though surround

left and right speakers are

not connected, only the

surround back speakers

are connected.

When using surround back

speakers, connection of the

surround left/right

speakers is necessary.

E-7:

No MIC

The YPAO microphone

has been removed.

While measuring, take

care not to touch the

YPAO microphone.

E-8:

No Signal

The YPAO microphone

could not distinguish a

test tone.

Check that the YPAO

microphone has been

installed correctly.

Check that each speaker

has been connected and

installed correctly.

The YPAO microphone

or the YPAO MIC jack

may be broken. Inquire at

the retailer where you

purchased this unit, or the

nearest Yamaha service

center.

E-9:

User Cancel

You have carried out an

operation that has

cancelled the measuring

process.

Carry out the measuring

process again. Do not

operate this unit by, for

example, adjusting the

volume.

E-10:

Internal Error

An internal error has

occurred.

Carry out the measuring

process again. Contact a

Yamaha service center if

“E-10” is displayed

again.

CONNECTIONS

Setting up the speaker parameters automatically (YPAO)

En 39

■ Warning messages

W-1:

Out of Phase

The speakers displayed

are connected with the

opposite polarity.

Depending on the type of

speakers you are using

and the environment in

which you have them

installed, this message

may occur even if the

speakers are connected

correctly.

Depending on the type of

speakers, “W-1” may

display even if the

speakers are connected

correctly.

Check that the speaker

polarity + (positive), and

- (negative) are correct. If

these are connected

correctly, you can use the

speakers normally even

this message appears.

W-2:

Over 24m/80ft

The speakers displayed

are separated from the

listening position by

more than 24 m, and

cannot be adjusted

correctly.

Install the speakers with

24 m of the listening

position.

W-3:

Level Error

Volume level varies

greatly for individual

channels, and cannot be

adjusted correctly.

Check that all speakers

are installed in the same

surroundings.

Check that the speaker

polarity + (positive), and

- (negative) are correct.

We recommend the same

speakers or speakers with

as similar specifications

as possible.

Adjust the volume of the

subwoofer.

If “W-2” or “W-3” appears, you can apply measurement results,

but they will not give optimal results. We recommend that you

resolve the problem and carry out the measurement process

again.

En 40

PLAYBACK

Turn on external components (TV, DVD

player, etc.) connected to this unit.

Use the dInput selector to select the input

source.

The name of the selected input source is displayed for

a few seconds. J1

When DOCK or TUNER is selected, the Content

window is displayed (☞

p. 54).

Play the external component that you have

selected as the source input, or select a

radio station on the tuner.

Refer to the instruction manuals provided with the

external component for details on playback.

For details on the following operations, refer to the

corresponding pages:

• “FM/AM tuning” (☞p. 55)

• “Playing back tunes from your iPod™/iPhone™”

(☞

p. 59)

• “Playing back tunes from Bluetooth™ components”

(☞

p. 64)

Press uVOLUME +/- to adjust the volume.

To mute the output.

Press vMUTE to mute the audio output.

Press vMUTE again to unmute.

■

Selecting the active HDMI OUT jack

Use this function to select the HDMI OUT jack(s) used

to output signal.

Press rHDMI OUT repeatedly to select setting.

The HDMI output setting changes as follows.

Basic playback procedure

dInput selector

rHDMI OUT

uVOLUME +/-

vMUTE

VOLUME

HDMI

AUDIO

1234

125

V-AUX

MUTE

DOCK

HDMI OUT

MULTI

1234

PHONO

TUNER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENTER

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

REE

RESET

TUNING

HDMI OUT 1+2 Outputs the signal at both the HDMI

OUT 1 and HDMI OUT 2 jacks

simultaneously.

HDMI OUT 1 Outputs the signals at the HDMI OUT 1

jack.

HDMI OUT 2 Outputs the signals at the HDMI OUT 2

jack.

HDMI OUT OFF Any signals are not output at the HDMI

OUT 1 and HDMI OUT 2 jacks. Select

this setting when you do not use the video

monitor connected to one of the HDMI

OUT jacks.

• The HDMI OUT jack that utilizes the HDMI Control

function can be selected with “Control Select”

(☞

p. 86).

• The active HDMI OUT jack(s) can be registered with

the SCENE function (☞

p. 42).

HDMI OUT 1+2

HDMI OUT OFF

HDMI OUT 1

HDMI OUT 2

1 : You can change the input source name displayed on the front

panel display as necessary (☞

p. 67).

En 41

PLAYBACK

Basic playback procedure

Adjusting high/low-frequency sound (Tone

control)

You can adjust the balance of the high-frequency range (Treble)

and low-frequency range (Bass) of sounds output from the front

left and right speakers to obtain desired tone.

Press TONE CONTROL on the front panel repeatedly

to select “Treble” or “Bass.”

The current setting is displayed on the front panel display.

Rotate PROGRAM selector to adjust the output level

in those frequency ranges.

The display returns to the previous display soon after you release

the key.

The tone control of the speakers or headphones can be set

separately. Set the headphone tone control with the headphones

connected.

PHONES

YPAO MIC

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFOZONE

CONTROL

ZONE2

MAIN ZONE

MEMORY

PRESET

FM AM

TONE CONTROL

PROGRAM selector

SL SR

SBL SBR

SL SR

Treble +0.5dB

TONE

VOL.

Adjustable range -6.0 dB to +6.0 dB

Adjustment

increments

0.5 dB

• The tone control settings are not effective when this unit is in the

Pure Direct mode or “MULTI CH” is selected as an input source.

• If you set the balance extremely off, sounds may not match those

from other channels well.

• The tone control can also be adjusted in the OPTION menu

(☞

p. 51).

PLAYBACK

En 42

This unit has a SCENE function that allows you switch this unit on and change input sources, sound programs, and HDMI OUT with one key.

Four scenes are available for different uses, such as

playing movies or music. The following input sources,

sound programs, and HDMI OUT are provided as the

initial factory settings.

Registering input sources/sound

program/HDMI OUT

Use dInput selector to select the input

source you want to register.

Use the sSound selection keys to select

the sound program, Compressed Music

Enhancer mode, or HDMI OUT you want to

Press the iSCENE key until “SET

Complete” appears on the front panel

display.

This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. Multi-channel playback from almost any audio source can be enjoyed using a variety

of sound decoders and various sound field effect programs stored on the chip. Sound field effect programs built into this unit are called “sound programs.”

Selecting sound programs and

sound decoders

This unit offers sound programs in many different

categories suitable for movies, music and other uses.

Choose a sound program that sounds best with the

source you are playing back, rather than relying on the

name or explanation of the program.

Changing input settings with a single key (SCENE function)

dInput selector

iSCENE

sSound selection keys

SCENE

ENHANCER

SUR. DECODE

STRAIGHT PURE DIRECT

HDMI

AUDIO

1234

125

V-AUX

MOVIE MUSIC

DVD

RADIO

DOCK

MULTI

1234

PHONO

TUNER

RETURN

SLEEP

PART Y

ENTER

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

OPTION

REE

HDMI

OUT

RESET

TUNING

SCENE Input

Sound

program

Compressed

Music

Enhancer

mode

HDMI

OUT

BD/

DVD

HDMI1 Drama Off HDMI

OUT 1+2

TV AV4 STRAIGHT On HDMI

OUT 1+2

CD AV3 STRAIGHT Off HDMI

OUT 1+2

RADIO TUNER STRAIGHT On HDMI

OUT 1+2

• When changing “SCENE,” also change the external

component that the remote control operates (☞

p. 93).

• Selecting a scene and editing the scene function are

also available in the SCENE menu (☞

p. 70).

SL SR

SET Complete

SCENE1

VOL.

SBL SBR

Release the key when “SET Complete” is displayed

Enjoying the desired sound field effect

• Sound programs are stored for each input source.

When you change the input source, the sound program

previously selected for that input source is applied

again.

• When you playback DTS Express sources or audio

signals with sampling frequency of higher than

96 kHz, the straight decoding mode (☞

p. 43) is

automatically selected.

• When you playback DTS-HD sources with CINEMA

DSP, the DTS decoder is automatically selected.

Continues to the

PLAYBACK

Enjoying the desired sound field effect

En 43

Selecting sound program (☞p. 46):

MOVIE category: Press sMOVIE repeatedly

MUSIC category: Press sMUSIC repeatedly

Selecting stereo reproduction:

Press sMUSIC repeatedly

Selecting surround decoder:

Press sSUR. DECODE repeatedly

Turning on Straight decoding mode:

Press sSTRAIGHT

Turning on Pure Direct mode (☞p. 45):

Press sPURE DIRECT

Turning on Compressed Music Enhancer

mode (☞

p. 45):

Press sENHANCER repeatedly

■

Enjoying unprocessed playback

(Straight decoding mode)

Use straight decoding mode when you want to playback

sound without sound field processing. You can playback

as follows in straight decoding mode.

2-channel sources such as CD

Stereo sound plays through the front left and right

speakers.

Multi-channel playback sources such as BD/

DVD

Plays back audio from a playback source without

applying sound field effects, using an appropriate

decoder to split the signal into multiple channels.

Press sSTRAIGHT to enable the straight

decoding mode.

■

Enjoying stereo playback

Select “2ch Stereo” from the sound programs when you

want to playback 2-channel stereo sound (from the front

speakers only), regardless of the playback source.

Selecting “2ch Stereo” will playback as follows for the

playback of CD and BD/DVD sources.

2-channel sources such as CD

Stereo sound plays back through the front speakers.

Multi-channel sources such as BD/DVD

Playback channels other than the front channels in the

playback source are mixed with the front channels and

played back through the front speakers.

Press sMUSIC repeatedly to select “2ch

Stereo.”

Sound selection keys

sMOVIE

sMUSIC

sENHANCER

sSUR. DECODE

sSTRAIGHT

sPURE DIRECT

ENHANCER

SUR. DECODE

STRAIGHT PURE DIRECT

MOVIE MUSIC

SCENE

RETURN

SLEEP

PART Y

DVD

RADI

ENTER

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

DMI

UDI

AUX

DOC

HDMI

MULTI

OPTION

REE

RESET

NER

TUNING

• You can use the speaker indicators on the front panel

display to check what speakers are currently

outputting sound (☞

p. 10).

• You can adjust sound field elements (sound field

parameters) for each of the programs (☞

p. 73).

SL SR

Sci-Fi

MOVIE

VOL.

SBL SBR

Sound program categories

Program

To disable straight decoding mode, press

sSTRAIGHT again.

SL SR

Straight

VOL.

SBL SBR

SL SR

Sci-Fi

MOVIE

VOL.

SBL SBR

Previously selected program

To disable stereo playback, press any of the

sSound selection keys to select a sound program

other than “2ch Stereo.”

2ch Stereo

MUSIC

VOL.

PLAYBACK

Enjoying the desired sound field effect

En 44

■

Enjoying sound programs without

surround speakers

This unit allows you to use virtual surround speakers to enjoy

sound field surround effects, even without any surround speakers

(Virtual CINEMA DSP mode). You can even enjoy surround sound

presence with just a minimal configuration of the front speakers

only.

This unit will switch to Virtual CINEMA DSP mode automatically

when surround speakers are unavailable. J1

■

Enjoying sound programs with

headphones

Even when headphones are connected, you can enjoy the

reproduction sound field presence with ease (SILENT CINEMA

mode). J2

■

Enjoying more spatial sound fields

(CINEMA DSP 3D mode)

CINEMA DSP 3D mode creates an intensive and accurate

stereoscopic sound field in the listening room.

Connection of presence speakers is recommended to take full

advantage of the effects of CINEMA DSP 3D mode. Do the

following steps. J3

• Connect the presence speakers to the EXTRA SP jacks and set the

speakers to use (☞

p. 14).

• Enable CINEMA DSP 3D in the OPTION menu (☞

p. 51).

When a sound program runs in CINEMA DSP 3D mode, the

CINEMA DSP 3D indicator on the front panel lights up.

■

Enjoying sound programs without

presence speakers

This unit allows you to use virtual presence speakers to create an

intensive and accurate stereoscopic sound field, even when no

presence speakers are connected (Virtual CINEMA DSP 3D

mode). You can even enjoy surround sound presence with front

speakers, center speaker, and surround speakers.

This unit automatically switches to Virtual CINEMA DSP 3D

mode when presence speakers are not available.

Do the following steps.

• Connect the front speakers, center speaker, and surround speakers.

• Enable center speaker and surround speakers in “Configuration”

(☞p. 80).

• Enable CINEMA DSP 3D in the OPTION menu (☞

p. 51).

PL PR

SL SR

Hall in Vienna

MUSIC

VOL.

Lights up

1 : However, Virtual CINEMA DSP mode is not available under the following

conditions:

• When headphones are connected to this unit.

• When a “7ch Stereo” or “2ch Stereo” sound program is selected.

• When Pure Direct mode or straight decoding mode is selected.

2 : However, SILENT CINEMA mode is not available under the following

conditions:

• When a “2ch Stereo” sound program is selected.

• When Pure Direct mode or straight decoding mode is selected.

3 : However, CINEMA DSP 3D mode is not available under the following

conditions:

• When headphones are connected to this unit.

• When a “7ch Stereo” or “2ch Stereo” sound program is selected.

• When Pure Direct mode or straight decoding mode is selected.

PLAYBACK

Enjoying the desired sound field effect

En 45

■

Enjoying Hi-Fi Sound Quality

(Pure Direct mode)

Use Pure Direct mode to enjoy the pure high fidelity

sound of the selected source. When Pure Direct mode is

enabled, this unit plays back the selected source with the

least circuitry. J1

Press sPURE DIRECT to turn Pure Direct mode

on. J2

■

Enjoying enhanced compression

artifacts (Compressed Music

Enhancer mode)

Compressed Music Enhancer mode improves the sound

enhancer near to the original depth and width of

compression artifacts. J3

This mode can be used along with any other DSP modes.

Press sENHANCER to turn Compressed Music

Enhancer mode on.

ENHANCER

sPURE DIRECT

ENHANCER

PURE DIRECT

SCENE

RETURN

UR. DE

STRAIGHTSLEEP

PART Y

OVI

USI

DVD

RADI

ENTER

DMI

UDI

AUX

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

DOC

HDMI

MULTI

OPTION

REE

RESET

NER

TUNING

To disable Pure Direct mode, press

sPURE DIRECT again.

To disable Compressed Music Enhancer mode, press

sENHANCER again.

SL SR

ENHANCER

Enhancer On

VOL.

SBL SBR

Lights up

1 : The following features are disabled in Pure Direct mode.

• sound program, tone control, YPAO PEQ, and Adaptive DRC

• displaying and operating the OPTION menu and Setup menu

2 : While Pure Direct mode is on, the front panel display screen turns

off in order to reduce noise. When turning Pure Direct mode off,

the screen returns on.

3 : However, Compressed Music Enhancer mode is not available in

the following audio:

• Signals of which sampling rate is over 48kHz

• High Definition stream

PLAYBACK

Enjoying the desired sound field effect

En 46

Sound programs

■

Category: MOVIE

Sound programs optimized for viewing video sources such as movies, TV programs, and games.

in the table indicates the sound program for CINEMA DSP.

Standard This program creates a sound field emphasizing the surround feeling without disturbing the

original acoustic positioning of multi-channel audio such as Dolby Digital and DTS. It has

been designed with the concept of an ideal movie theater, in which the audience is

surrounded by beautiful reverberations from the left, right and rear.

Spectacle This program represents the spectacular feeling of large-scale movie productions. It

reproduces a broad theater sound field that matches cinemascope and wider-screen movies

with an excellent dynamic range providing everything from very small sound effects to

large, impressive sounds.

Sci-Fi This program clearly reproduces the finely elaborated sound design of the latest science

fiction and special effects-featuring movies. You can enjoy a variety of cinematographically

created virtual spaces reproduced with clear separation between dialog, sound effects and

background music.

Adventure This program is ideal for precisely reproducing the sound design of action and adventure

movies. The sound field restrains reverberations but puts emphasis on reproducing a

powerful space expanded widely to the left and right. The reproduced depth is also

restrained relatively to ensure the separation between audio channels and the clarity of the

sound.

Drama This sound field features stable reverberations that match a wide range of movie genres from

serious dramas to musicals and comedies. The reverberations are modest but offer an

optimum 3D feeling, reproducing effects tones and background music softly but cubically

around clear words and center positioning in a way that does not fatigue the listener even

after long hours of viewing.

Mono Movie This program is provided for reproducing monaural video sources such as a classic movie in

an atmosphere of a good old movie theater. The program produces the optimum expansion

and reverberation to the original audio to create a comfortable space with a certain sound

depth.

Sports This program allows the listeners to enjoy stereo sport broadcasts and studio variety

programs with enriched live feeling. In sports broadcasts, the voices of the commentator and

sportscaster are positioned clearly at the center while the atmosphere of the stadium expands

in an optimal space to offer the listeners a feeling of presence in the stadium.

Action Game This sound field is suitable for action games such as car racing, fighting games and FPS

games. The reality of, and emphasis on, various effects makes the player feel like they are

right in the middle of the action, allowing for greater concentration.

Use this program in combination with Compressed Music Enhancer mode for a more

dynamic sound field.

Roleplaying Game This sound field is suitable for role-playing and adventure games. This program adds depth

to the sound field for natural and realistic reproduction of background music, special effects

and dialog from a wide variety of scenes.

Use this program in combination with Compressed Music Enhancer mode for a more

dynamic sound field.

Music Video This sound field offers an image of a concert hall for live performance of pop, rock and jazz

music. The listener can indulge oneself in a hot live space thanks to the presence sound field

that emphasizes the vividness of vocals and solo play and the beat of rhythm instruments,

and to the surround sound field that reproduces the space of a big live hall.

PLAYBACK

Enjoying the desired sound field effect

En 47

■

Category: MUSIC

This sound field is suitable when listening to music sources such as CDs.

■

Category: SUR.DEC (Surround decode mode)

Select this program to playback sources with selected decoders. You can playback 2-channel audio

sources in up to 7-channels using a surround decoder.

Hall in Munich This sound field simulates a concert hall with approximately 2500 seats in Munich, using

stylish wood for the interior finishing as normal standards for European concert halls. Fine,

beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual

seat is at the center left of the arena.

Hall in Vienna This is an approximately 1700-seat, middle-sized concert hall with a shoebox shape that is

traditional in Vienna. Pillars and ornate carvings create extremely complex reflections from

all around the audience, producing a very full, rich sound.

Chamber This program creates a relatively wide space with a high ceiling like an audience hall in a

palace. It offers pleasant reverberations that are suitable for courtly music and chamber

music.

Cellar Club This program simulates a live house with a low ceiling and homey atmosphere. A realistic,

live sound field features powerful sound as if the listener is in a row in front of a small stage.

The Roxy Theatre This is the sound field of a rock music live house in Los Angeles, with approximately 460

seats. The listener’s virtual seat is at the center left of the hall.

The Bottom Line This is the sound field at stage front in The Bottom Line, a famous New York jazz club once.

The floor can seat 300 people to the left and right in a sound field offering real and vibrant

sound.

2ch Stereo Use this program to mix down multi-channel sources to 2-channels. When multi-channel

signals are input, they are down mixed to 2-channels and output from the front left and right

speakers.

7ch Stereo Use this program to output sound from all speakers. When you playback multi-channel

sources, this unit down-mixes the source to 2-channels, and then outputs the sound from all

speakers. This program creates a larger sound field and is ideal for background music at

parties, etc.

q Pro Logic Reproduces sound using the Dolby Pro Logic decoder. This is suitable for all kinds of audio

sources.

q PLIIx Movie /

q PLII Movie

Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is

suitable for movies. J1

q PLIIx Music /

q PLII Music

Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is

suitable for music. J1

q PLIIx Game /

q PLII Game

Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is

suitable for games. J1

Neo:6 Cinema Reproduces sound using the DTS Neo:6 decoder. This is suitable for movies.

Neo:6 Music Reproduces sound using the DTS Neo:6 decoder. This is suitable for music.

1 : You cannot select the Dolby Pro Logic IIx decoder in the following conditions:

• When “Surround Back” is set to “None” (☞

p. 80).

• When headphones are connected.

PLAYBACK

En 48

This unit features a sophisticated on-screen display (OSD) that helps you to control the amplifier function of this unit. With the OSD, you can view information of the

signals being input and the status of this unit. Visual guidance simplifies operations for menus.

Basic operations via the TV screen

display

This section describes basic operations for configuring

“Input,” “Scene” and “Sound Program” using the OSD.

Press jON SCREEN.

The ON SCREEN menu is displayed on the TV screen.

■

Selecting an input source

Use kCursor B / C to select “Input” and

press kENTER.

Input source icons are displayed at the bottom of the

TV screen.

Use kCursor D / E to select a Input source

press kENTER.

The input source is selected.

Using the TV display to control this unit

jON SCREEN

kCursor B / C / D / E

kENTER

kRETURN

RETURN

ENTER

ON SCREEN

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

A TV screen is required to display the ON SCREEN

or OPTION menu. Refer to “Connecting a TV

monitor” for instructions on connecting a TV screen

(☞

p. 21).

• Pressing kRETURN displays the previous menu

screen. Press

kRETURN repeatedly to close the ON

SCREEN menu.

• In addition to selecting an input source, detailed

settings for each input source can be configured. Refer

to “Configuring input sources (Input menu)” (☞

p. 66)

for details.

PLAYBACK

Using the TV display to control this unit

En 49

■

Selecting a scene

Use kCursor B / C to select “Scene” and

press kENTER.

Scene icons are displayed at the bottom of the TV

screen.

Use kCursor D / E to select a scene and

press kENTER.

The scene is selected.

■

Selecting a sound program

Use kCursor B / C to select “Sound

Program” and press kENTER.

Sound program icons are displayed at the bottom of the

TV screen.

Use kCursor D / E to select a sound

program and press kENTER.

The sound program is selected.

RETURN

ENTER

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

P-U

PLAY

AIN

NE 2

EIVE

CODE SET

MUTE

PTION

REE

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNIN

kCursor B / C / D / E

kENTER

kRETURN

• Pressing kRETURN displays the previous menu

screen. Press

kRETURN repeatedly to close the ON

SCREEN menu.

• Refer to “Changing input settings with a single key

(SCENE function)” (☞

p. 42) for details on the default

scene settings.

• Detailed SCENE function settings can be edited. Refer

to “Editing the SCENE function (SCENE menu)”

(☞

p. 70) for details.

• Pressing kRETURN displays the previous menu

screen. Press

kRETURN repeatedly to close the ON

SCREEN menu.

• Refer to “Enjoying the desired sound field effect”

(☞

p. 42) for various sound programs.

• You can configure the detailed settings for each sound

program. Refer to “Setting sound program parameters

(Sound Program menu)” (☞

p. 73) for details.

NOTES

Menus can be operated and the status of this unit

confirmed from the following three main displays.

• ON SCREEN menu (☞

p. 66)

• OPTION menu (☞

p. 50)

• Content window (☞

p. 54)

These menus and status features can be used to

configure more various functions in addition to

selecting “Input,” “Scene” and “Sound Program.”

Refer to each references for details on menus and

status.

PLAYBACK

En 50

This unit has a unique OPTION menu for each input source. OPTION menus can be used to enable features such as volume trim for compatible input sources or to display

audio/video data.

OPTION menu display and setup

OPTION menu operations are displayed on the front

panel display or TV screen. TV display is used here to

explain operation.

Use dInput selector to select an input

source to which options will be applied.

Press tOPTION.

The OPTION menu is displayed.

The displayed OPTION menu settings differ

depending on the input source.

For more information, refer to the “OPTION menu” on

the next page.

Use kCursor B / C to select the desired

setting and press kENTER.

Parameters of the selected item are displayed.

Use kCursor B / C / D / E to select the

desired item (or enable a function).

Press tOPTION to close the OPTION menu.

Configuring settings specific to an individual input source (OPTION menu)

dInput selector

kCursor B / C / D / E

kENTER

kRETURN

tOPTION

RETURN

HDMI

AUDIO

1234

125

V-AUX

ENTER

DOCK

MULTI

OPTION

1234

PHONO

TUNER

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

REE

HDMI

OUT

RESET

TUNING

OPTION menu

• Press kRETURN to display the previous screen or

close the OPTION menu.

• The OPTION menu may close automatically when

some functions are enabled.

The keys on the remote control may not respond for a

few seconds after the OPTION menu is closed.

Should this occur, select the input source again.

PLAYBACK

Configuring settings specific to an individual input source (OPTION menu)

En 51

OPTION menu

The following items are provided for each input source. J1

■

Adjusting high/low-frequency sound

Tone Control

Input source: All input sources except MULTI CH

You can adjust the balance of the high-frequency range (Treble)

and low-frequency range (Bass) of sounds output from the front

left and right speakers to obtain desired tone.

HDMI1-5 Tone Control Adaptive DRC CINEMA DSP 3D

Mode

Dialogue Lift J2 Extended

Surround

Volume Trim

AV1-4 Tone Control Adaptive DRC CINEMA DSP 3D

Mode

Dialogue Lift J2 Extended

Surround

Volume Trim

AV5-6 Tone Control Adaptive DRC CINEMA DSP 3D

Mode

Dialogue Lift J2 Vo l u m e Tr i m

AUDIO1-2 Tone Control Adaptive DRC CINEMA DSP 3D

Mode

Dialogue Lift J2 Vo l u m e Tr i m

V-AUX Tone Control Adaptive DRC CINEMA DSP 3D

Mode

Dialogue Lift J2 Extended

Surround

Volume Trim

PHONO Tone Control Adaptive DRC CINEMA DSP 3D

Mode

Dialogue Lift J2 Vo l u m e Tr i m

TUNER Tone Control Adaptive DRC CINEMA DSP 3D

Mode

Dialogue Lift J2 Vo l u m e Tr i m

DOCK

(iPod)

Tone Control Adaptive DRC CINEMA DSP 3D

Mode

Dialogue Lift J2 Volume Trim Shuffle J3

Repeat J3

DOCK

(Bluetooth)

Tone Control Adaptive DRC CINEMA DSP 3D

Mode

Dialogue Lift J2 Volume Trim Pairing

Connect/

Disconnect

MULTI CH Volume Trim

Adjustable range -6.0 dB to +6.0 dB

Adjustment

increments

0.5 dB

• The tone control of the speakers or headphones can be set

separately. Set the headphone tone control with the headphones

connected.

• TONE CONTROL

on the front panel can also be used (☞p. 41).

1 : When “Tone Control,” “Adaptive DRC,” “CINEMA DSP 3D Mode,”

“Dialogue Lift,” or “Extended Surround” is adjusted for an input source, the

same value is applied to other input sources and “ALL” is displayed on the

front panel display. When settings specific to a certain input source are

selected, the input source name is displayed on the front panel display. If the

name of the input source has been changed (☞

p. 67), the original name of the

input source is displayed.

2 : “Dialogue Lift” can be adjusted only when the presence speakers are available.

3 : Not available for Yamaha iPod wireless receiver.

PLAYBACK

Configuring settings specific to an individual input source (OPTION menu)

En 52

■

Auto-adjusting the sound level to make

even low volumes more audible

Adaptive DRC

Input source: All input sources except MULTI CH

Adjusts the dynamic range in conjunction with the volume level

(from minimum to maximum). When you play audio at night or at

low volumes, it is a good idea to set parameter to “On.” J1

When “On” is selected, the dynamic range is adjusted as follows.

If the volume level is low, the dynamic range is narrow.

If the volume level is high, the dynamic range is wide.

■

Enjoying more spatial sound fields

CINEMA DSP 3D Mode

Input source: All input sources except MULTI CH

When CINEMA DSP 3D is enabled, set whether to use sound

programs in CINEMA DSP 3D mode (☞

p. 44).

■

Adjusts the vertical position of dialogues

Dialogue Lift

Input source: All input sources except MULTI CH

Adjusts the vertical position of center sound such as dialogues

when presence speakers are used. Increasing this parameter raises

the position.

If the dialog seems to come out from a lower position than the

video monitor screen, increase this parameter.

“0” (default) corresponds to the lowest position and “5” to the

highest position.

■

Selecting the 5.1-channel signal playback

method

Extended Surround

Input source: HDMI1-5, AV1-4, V-AUX J2

Selects whether to reproduce 5.1-channel input signals in 6.1- or

7.1-channel when surround back speakers are used.

On Adjusts the dynamic range automatically.

Off (Default) Does not adjust the dynamic range automatically.

Off

Input Level Input Level

Volume: low Volume: high

Output Level

• “Dialogue Lift” can be adjusted only when the presence speakers

are available.

• You cannot move the dialog position lower than the default

setting.

The ideal dialog

position

Move up to the ideal

dialog position

Auto (Default) Automatically selects the most suitable decoder if a

flag for reproducing surround back channel is present,

and reproduces the signals in 6.1- or 7.1-channel.

q PLIIx Movie Always reproduces signals in 7.1-channel using the

Dolby Pro Logic IIx Movie decoder whether or not

surround back channel signals are contained. You can

select this parameter when two surround back

speakers are connected.

q PLIIx Music Always reproduces signals in 6.1- or 7.1-channel

using the Dolby Pro Logic IIx Music decoder whether

or not surround back channel signals are contained.

You can select this parameter when one or two

surround back speakers are connected.

EX/ES Automatically selects the most suitable decoder for

input signals whether or not the flag for reproducing

surround back channel is present, and always

reproduces signals in 6.1-channel.

Off Always reproduces original channels whether or not

the flag for reproducing surround back channel is

present.

1 : “Adaptive DRC” is also effective when you use headphones.

2 : AV5-6 or AUDIO1-2 are also available when “Audio Return Channel” is on,

and the input source is used for “TV Audio Input.”

PLAYBACK

Configuring settings specific to an individual input source (OPTION menu)

En 53

■

Adjusting volume between input sources

Volume Trim

Input source: All

Reduces any change in volume when switching between input

sources by correcting volume differences in each input source. You

can adjust this parameter for each input source.

■

Shuffle playback with iPod/iPhone

Shuffle

Input source: DOCK (iPod) J1

Plays back songs or albums in random order. When the shuffle

function is enabled, “ ” appears on the TV screen.

■

Repeat playback with iPod/iPhone

Repeat

Input source: DOCK (iPod) J1

Plays songs or albums repeatedly. When the repeat function is

enabled, “ (One)” or “ (All)” appears on the TV screen.

■

Connect / Disconnect Bluetooth

component

Connect

Disconnect

Input source: DOCK (Bluetooth)

Switches communication with a Bluetooth component on and off

(☞

p. 64).

■

Pairing Bluetooth component

Pairing

Input source: DOCK (Bluetooth)

Performs pairing of this unit and a Bluetooth component (☞p. 64).

Adjustable range -6.0 dB to 0.0 dB to +6.0 dB

Default setting 0.0 dB

Adjustment

increments

0.5 dB steps

Off The shuffle function is turned off.

Songs Plays songs back in random order.

Albums Plays albums back in random order.

Off The repeat function is turned off.

One Plays a song back repeatedly.

All When all songs have completed playback, returns to

the start and repeats playback.

1 : Not available for Yamaha iPod wireless receiver.

PLAYBACK

En 54

When DOCK or TUNER is selected, the Content window is displayed on the TV screen. Playback style for iPod and functions for FM/AM tuner can be set in the Content

window.

Displaying the Content window on

the TV screen

Press dDOCK or dTUNER to display the

Content window.

The Content window consists of two main displays, the

Now Playing view and the Content browse view.

Below is the example of the Now playing view for TUNER.

a Image display

Icon for each input source or album art is displayed.

b Information display

Information on the current input source is displayed.

c Screen button area

Buttons to operate each input source are displayed here.

These buttons vary depending on the selected input. For

details on operations for each input, see the following.

– FM/AM tuner (☞

p. 57)

– iPod (☞

p. 60)

Switching the display between the

Now Playing view and the Content

browse view

You can switch the display between the Now Playing

view and the Content browse view by the following

methods.

• Press lDISPLAY to cycle between the Now Playing

view and the Content browse view.

• In the Now Playing view, press

kENTER and use

kCursor B / C to select the icon. Then press

kENTER to switch to the Content browse view.

• In the Content browse view, press

kCursor E and use

kCursor B / C to select the icon. Then press

kENTER to switch to the Now Playing view.

Confirming and operating input sources from the Content window

dDOCK

dTUNER

kCursor B / C / D / E

kENTER

lDISPLAY

ENTER

DISPLAY

DOCK

TUNER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

AIN

NE 2

EIVE

CODE SE

MUTE

OPTION

REE

RESET

DMI

UDI

AUX

HDMI

MULTI

TUNING

A TV screen is required to display the Content

window. Refer to “Connecting a TV monitor” for

instructions on connecting a TV monitor (☞

p. 21).

abc

• In the Now playing view, press kENTER and use

kCursor B / C to select the button. Then press

kENTER to execute the selection.

• In the Content browse view, press

kCursor E and

use

kCursor B / C to select the button. Then press

kENTER to execute the selection.

• Press

kRETURN repeatedly to exit from the

operation.

Now playing view

Content browse view

lDISPLAY

PLAYBACK

En 55

Selecting a frequency for reception

(Normal tuning)

Press dTUNER to switch to the tuner input.

Press eFM or eAM to select a band to

receive.

FM/AM tuning

dTUNER

eFM

eAM

FM AM

TUNER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENTER

DMI

UDI

AUX

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

DOCK

HDMI

MULTI

PTION

REE

RESET

TUNING

When using the FM/AM tuner, adjust the direction of

the FM/AM antenna connected to this unit to get the

best reception.

(Asia and General models only)

The factory pre-set FM/AM tuner frequency steps are

9 kHz for AM and 50 kHz for FM.

Carry out the following settings and select the

frequency steps suitable for your listening

environment.

Switch this unit to the standby mode.

Press MAIN ZONE A while pressing and

holding STRAIGHT on the front panel.

Release the keys when “ADVANCED SETUP” is

displayed on the front panel display.

After approximately a few seconds, the top menu

items are displayed. J1

PHONES

YPAO MIC

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFOZONE

CONTROL

ZONE2

MAIN ZONE

MEMORY

PRESET

FM AM

STRAIGHT

PROGRAM selector

MAIN ZONE A

Rotate PROGRAM selector to display

“TU.”

Press STRAIGHT repeatedly to select a

frequency steps.

Switch this unit to the standby mode, and

then switch it on again.

The power turns on, with the settings you made

configured.

TU-AM9/FM50

SL SR

FM87.50MHz

VOL.

SBL SBR

Continues to the

1 : Refer to the “Extended functionality that can be configured as

needed (Advanced Setup menu)” (☞

p. 96) for details on the

Advanced Setup menu.

PLAYBACK

FM/AM tuning

En 56

Use eTUNING H / I to set a frequency to

receive.

TUNING H

Increases the frequency. Press and hold this key for

longer than a second to search automatically for a station

on a higher frequency than the current one. J1

TUNING I

Decreases the frequency. Press and hold this key for

longer than a second to search automatically for a station

on a lower frequency than the current one. J1

MEMORY

ePRESET F / G

eTUNING H / I

mNumeric keys

MEMORY

PRESET

7856

1234

ENT

TUNING

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENTER

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

DOCK

HDMI

MULTI

DMI

UDI

AUX

PTION

REE

NER

■ Entering a frequency number

In normal tuning mode, use the mNumeric keys to

enter a frequency. Leave the decimal point out when

entering a number. J2

For example, enter as follows to select a station on

98.50 MHz.

STEREO

TUNED

SL SR

SBL SBR

FM98.50MHz

STEREO

TUNED

VOL.

Lights up when a broadcast

is received from a station

Lights up when a stereo

broadcast is received

9 8

ENT

■ Registering stations manually (Manual

Preset)

Select stations manually and register them as presets

individually.

Tune in to the station you want to

frequency for reception (Normal tuning).”

Use one of the following methods to

receiving.

■ Registering to a preset number to which

no station is registered

Press eMEMORY for 3 seconds or longer.

The station will be registered automatically to the

lowest open preset number (or the next number after

the one registered most recently).

STEREO

TUNED

SL SR

01:FM98.50MHz

MEMORY

VOL.

SBL SBR

Registered frequencies

■ Designating a preset number for

registration

Press eMEMORY once, to display “Manual Preset”

on the front panel display. After a small wait, the

preset number that the station has been registered to

will appear.

Press ePRESET F / G to select the preset number

to register the station to, and then press eMEMORY

to register.

To select a registered station, press

ePRESET F / G to select the preset number

of the station. J3

STEREO

TUNED

SL SR

01:Empty

9850

VOL.

SBL SBR

Preset number

The newly registered frequency

Empty, or the frequency

registered most previously

Blinks

1 : When searching for a station, release the key once the search has

started.

2 : “Wrong Station!” appears on the front panel display when you

enter a frequency that is out of receivable range. Make sure that

the frequency entered is correct.

3 : To select a station by selecting a preset number, use the

mNumeric keys to enter the preset number of the station you

want to listen. When an invalid number is entered, “Wrong Num.”

appears on the front panel display. Check that you have entered

the correct number.

PLAYBACK

FM/AM tuning

En 57

Confirming and operating the

FM/AM tuner from the Content

window

The station currently received can be confirmed from the

menu displayed on the TV screen. Various FM/AM tuner

operations can be performed from the Content window

rather than controls on the front panel display. The

Content window is displayed when dTUNER is

pressed.

You can operate the FM/AM tuner from the Now Playing

view or the Content browse view.

■

Operating from the Now playing

view

a Tuned indicator

Lights up when a station is received.

b Stereo indicator

Lights up when a stereo broadcast is received. When “FM

Mode” is set to “Mono,” the indicator does not light.

c Preset number

The selected preset number is displayed.

d Band

The selected band (FM or AM) is displayed.

e Frequency

The frequency currently received is displayed.

f Frequency guide

The frequency currently received is displayed as a cursor

on the bar.

g Screen button area

Buttons for available operations are displayed. See

“Screen buttons on the Now playing view” for details.

Screen buttons on the Now playing view

To use these buttons, first press kENTER. Then select

the desired one with kCursor B / C and kENTER.

Manual Tuning

You can tune in to a desired FM/AM station by

specifying its frequency.

Preset Select

You can call preset stations.

Utility

Scroll

Switches the scroll target.

Browse

Switches the display to the Content browse view.

TUNER

kCursor B / C

kENTER

ENTER

TUNER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

REE

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

TUNING

a b

FM Switches a band to FM.

AM Switches a band to AM.

Tuning - Decreases the frequency.

Tuning + Increases the frequency.

Auto - Automatically searches for a station on a

lower frequency than the current station.

Auto + Automatically searches for a station on a

higher frequency than the current station.

Direct Selects the frequency manually.

Memory Registers the station currently received as

a preset station. Up to 40 FM/AM stations

can be registered.

PRESET - Selects the previous preset number.

PRESET + Selects the next preset number.

Preset -8 Returns the previous page.

Preset +8 Goes to the next page.

Direct Selects a station directly by entering the

preset number.

Memory Registers the station currently received as

a preset station. Up to 40 FM/AM stations

can be registered.

FM Mode Selects “Stereo” or “Mono” when

receiving the FM station.

Continues to the

PLAYBACK

FM/AM tuning

En 58

■

Operating from the Content browse

view

a Preset station list

The list of preset stations is displayed.

b Screen button area

Buttons for available operations are displayed. See

“Screen buttons on the Content browse view” for details.

Screen buttons on the Content browse view

To use these buttons, first press kCursor E. Then

select the desired one with kCursor B / C and

kENTER.

Utility

1 Page Up

1 Page Down

Scrolls the list to the next or previous page.

Now Playing

Switches the display to the Now playing view.

Cursor B / C / D / E

kENTER

ENTER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

REE

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

Auto Preset Detects stations with a strong signal and

automatically registers up to 40 stations,

beginning with the next number after the

current number.

Clear Preset Clears registration of the preset station

currently selected.

Clear All Preset Clears registration of all preset stations.

PLAYBACK

En 59

Once you have connected a Universal Dock for iPod/iPhone (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the

remote control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound programs to give compressed

audio formats such as MP3 a sharper, more dynamic sound (☞

p. 45). A Yamaha iPod wireless system (YID-W10, sold separately) can also be connected to this unit to

play back iPod/iPhone with wireless connection.

Connecting the Universal Dock for

iPod/iPhone

Use the dedicated cable to connect the dock to the

DOCK jack on the rear panel of this unit. Refer to the

operating instructions of the Universal Dock for iPod/

iPhone for information on how to connect your iPod/

iPhone.

Switch this unit on and place your iPod/iPhone in the

dock. The unit is now ready for playback.

When this unit is in standby mode, iPod/iPhone can be

charged automatically (☞

p. 68).

Controlling an iPod™/iPhone™

After setting your iPod/iPhone in your dock, just press

dDOCK to switch to DOCK input to play your iPod/

iPhone.

The iPod/iPhone can be operated in the following two

ways.

Menu browse control:

Plays the iPod/iPhone while viewing the menu displayed

on the TV. Refer to “Playing iPod/iPhone from the menu

screen (Menu browse control)” (☞

p. 60).

Simple remote control:

Plays audio and video through this unit while viewing

the menu displayed on the iPod/iPhone screen. Refer to

“Operating basic playback functions via the remote

control (Simple remote control)” (☞

p. 62).

Playing back tunes from your iPod™/iPhone™

dDOCK

fINFO

INFO

DOCK

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENTER

RESET

DMI

UDI

AUX

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

HDMI

MULTI

PTION

REE

NER

TUNING

• When playing back iPod/iPhone with wired

connection

Refer to “Connecting the Universal Dock for iPod/

iPhone.”

• When playing back iPod/iPhone with

wireless connection

Refer to “Playing iPod™/iPhone™ with wireless

connection” (☞

p. 62).

• iPod touch, iPod (4th Gen/5th Gen/Classic), iPod

nano, iPod mini, iPhone, iPhone 3G, and iPhone 3GS

are supported (As of March 2010).

• When connecting iPhone, iPhone 3G and iPhone 3GS,

use a YDS-12.

• Some features may not be compatible depending on

the model or the software version of your iPod/iPhone.

• Some functions may not be available for some

Universal Dock for iPod

/iPhone models. This

explanation focuses on the YDS-12.

CAUTION

To prevent accidents, switch this unit to standby mode

before connecting the Universal Dock for iPod/

iPhone.

SL SR

SBL SBR

iPodconnected

DOCK

VOL.

DOCK

(

)

AXIAL

OPTI

VIDEO

PHONO

OPTICA

AV 1

AV 2

AXIA

OMPONEN

IDEO

Universal Dock

for iPod/iPhone

Locate the dock at the distance as far as from

the unit.

• Song information (artist, album, song) is displayed on

the front panel. Press

fINFO repeatedly to display

subsequent/previous information.

• The Yamaha logo is displayed on the iPod screen

when iPod stationed in the Universal Dock for iPod/

iPhone (does not apply to the iPod touch or iPhone).

• Manual control of the iPod/iPhone is not possible

while the iPod stationed in the Universal Dock for

iPod/iPhone.

PLAYBACK

Playing back tunes from your iPod™/iPhone™

En 60

Playing iPod/iPhone from the menu

screen (Menu browse control)

The iPod/iPhone can be operated from the menu

displayed on the TV screen.

You can operate the iPod/iPhone from the Now playing

view or the Content browse view.

■

Operating from the Content browse

view

a Input name / List name

b Menu items

c Input icon

d Screen button area

Buttons for available operations are displayed. See

“Screen buttons on the Content browse view” for details.

e Current menu number / Number of all menu items

Screen buttons on the Content browse view

To use these buttons, first press kCursor E. Then

select the desired one with kCursor B / C and

kENTER.

10 Pages Up

10 Pages Down

Goes to 10 pages forwards or backwards.

1 Page Up

1 Page Down

Scrolls the list to the next or previous page.

Now Playing

Switches the display to the Now playing view.

Returns to the video playback, turning off the menu

display.

Press dDOCK to switch to the DOCK input.

Press kCursor B / C to select the content

(music or video) that you want to play, and

press kENTER. J1

Press kCursor B / C to select iPod/iPhone

menu items, and press kENTER to play.

The Now playing view appears during playback.

■

Operating from the Now playing

view

a Repeat icon

b Shuffle icon

c Play icon

d Album image

e Artist name

f Album title

g Screen button area

Buttons for available operations are displayed. See

“Screen buttons on the Now playing view” for details.

h Song title

i Remaining time

j Progress bar

k Elapsed time

Screen buttons on the Now playing view

To use these buttons, first press kENTER. Then select

the desired one with kCursor B / C and kENTER.

ENTER

DOCK

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

REE

RESET

DMI

UDI

AUX

HDMI

MULTI

NER

TUNING

dDOCK

kCursor B / C / D / E

kENTER

b ca

1 : Videos will not be displayed when your iPod or Universal Dock

for iPod/iPhone do not support the browser function for browsing

video files.

PLAYBACK

Playing back tunes from your iPod™/iPhone™

En 61

Play Control

Operates the basic playback functions of iPod/iPhone.

Scroll

Switches the scroll target (artist name, album name, or

song name).

Browse

Switches the display to the Content browse view.

Returns to the video playback, turning off the menu

display.

kENTER

ENTER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

OPTION

REE

DMI

UDI

AUX

DOC

HDMI

MULTI

RESET

NER

TUNING

p (Play) Starts playback.

s (Stop) Stops playback.

e (Pause) Stops playback temporarily.

b (Skip -) Skips to the beginning of the currently

playing song. Press kENTER at the

beginning of the song to skip to a

previous song.

a (Skip +) Skips to the beginning of the next song.

w (Scan -) Searches backwards.

f (Scan +) Searches forwards.

PLAYBACK

Playing back tunes from your iPod™/iPhone™

En 62

Operating basic playback functions

via the remote control (Simple

remote control)

Use the following remote control keys to operate

(playback, stop, skip, etc.) your iPod/iPhone.

Press lREC to enable the Simple remote control.

Press lREC again to return to the Menu browse

control.

Playing iPod™/iPhone™ with

wireless connection

A Yamaha iPod wireless system (YID-W10, sold

separately) can be connected to this unit to play back

iPod/iPhone with wireless connection. The iPod/iPhone

can be used as the remote control. J1

■

Connecting the Yamaha iPod

wireless transmitter and playing

back iPod/iPhone

Use the dedicated cable to connect the wireless receiver

to the DOCK jack on the rear panel of this unit. Refer to

the operating instructions of the YID-W10 for more

information.

Place the iPod/iPhone in the wireless transmitter. Setup

is complete.

When this unit is in standby mode, iPod/iPhone can be

charged automatically, if “Standby Charge” is set to

“Auto” (☞

p. 68) or “Power & Input” of “iPod Interlock”

is set to “On” (☞

p. 69).

dDOCK

kCursor B / C

kENTER

kRETURN

lREC

l b

RETURN

ENTER

REC

DOCK

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

REE

RESET

HDMI

MULTI

DMI

UDI

AUX

NER

TUNING

dDOCK Switches to the DOCK (iPod) input.

kCursor B / C Move the cursor up and down to different

fields.

kRETURN Returns to the previous menu.

kENTER Enables the selected menu.

l w Searches backwards while held down.

l f Searches forwards while held down.

l b Skips to the beginning of the currently

playing song. Pressing repeatedly skips

one song backwards with each press.

l a Skips to the beginning of the next song.

l s Stops playback.

l e Switches between playback and pause.

l p Switches between playback and pause.

CAUTION

To prevent accidents, unplug the power cable of this

unit before connecting the iPod wireless receiver.

SL SR

SBL SBR

iPodconnected

DOCK

VOL.

DOCK

(

)

AXIAL

IDEO

PHONO

OPTICA

AV 1

AV 2

AXIAL

OMPONENT

IDEO

Yamaha iPod

wireless receiver

Position the wireless receiver as far as possible

from the unit.

1 : Video signals cannot be transmitted wirelessly.

PLAYBACK

Playing back tunes from your iPod™/iPhone™

En 63

Use iPod/iPhone to start playback.

• This unit, which is placed in the main zone, functions as

follows when iPod/iPhone controls are used to start

playback.

– The input source switches to DOCK (iPod) when this

unit is turned on.

– When this unit is in standby mode when iPod/iPhone

playback starts, this unit turns on and the input source

switches to DOCK (iPod). J1

• This unit automatically enters standby mode when the

following operations are performed.

– iPod/iPhone is removed from the YID-W10

– iPod/iPhone is not operated for a while after playback

is stopped

• Adjusting volume control on the iPod/iPhone also adjusts

the volume (max 0.0 dB) of this unit.

dDOCK

DOCK

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENTER

RESET

DMI

UDI

AUX

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

HDMI

MULTI

PTION

REE

NER

TUNING

• Pressing dDOCK also switches the input source to

DOCK (iPod).

• When a menu is operated, this function is not

activated.

• When “iPod Interlock” →

“Power & Input” in the

Input menu is set to “Off,” the power and the input

source do not switch automatically (☞

p. 69).

When “iPod Interlock” → “Volume” in the Input

menu is set to “Off,” the volume of this unit is not

adjusted when iPod/iPhone volume controls are

adjusted

(☞p. 69).

CAUTION

When iPod/iPhone controls are used to adjust volume,

playback volume may be unexpectedly loud. This

could result in damage to this unit or the speakers. If

the volume suddenly increases during playback,

immediately remove the iPod/iPhone from the

Universal Dock for iPod/iPhone. “Max Volume” can

be used to specify the maximum volume level to

prevent excessively loud playback (☞

p. 83).

1 : This function is also activated when sound of application is

reproduced or ringtone is received.

PLAYBACK

En 64

You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible

portable music players. J1

Connecting a Yamaha Bluetooth

wireless audio receiver

Use the dedicated cable to connect the dock to the

DOCK jack on the rear panel of this unit.

The Bluetooth wireless audio receiver connection will be

complete when this unit is turned on.

Pairing Bluetooth™ components

Be sure to carry out pairing when connecting a Bluetooth

component for the first time, or when settings have been deleted.

Refer to the operating instructions of your Bluetooth

component as necessary when carrying out pairing.

Press dDOCK to switch to the DOCK input.

Turn on the Bluetooth component you want

to pair with and set it to pairing mode.

Press tOPTION to display the OPTION

menu and use kCursor B / C to select

“Pairing.”

Press kENTER to start pairing.

Playing back tunes from Bluetooth™ components

NOTE

When playing back from a Bluetooth component for the first time, you must first pair the devices (register the Bluetooth components). When establishing a wireless connection

you must carry out pairing on both this unit and on the Bluetooth component.

dDOCK

eMEMORY

kCursor B / C

kENTER

kRETURN

tOPTION

RETURN

MEMORY

ENTER

DOCK

OPTION

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

REE

RESET

DMI

UDI

AUX

HDMI

MULTI

NER

TUNING

CAUTION

To prevent accidents, switch this unit to standby mode

before connecting a Bluetooth wireless audio receiver.

DOCK

(

)

AXIAL

OPTI

VIDEO

PHONO

OPTICA

AV 1

AV 2

AXIA

OMPONEN

IDEO

Yamaha Bluetooth

wireless audio receiver

The Yamaha Bluetooth wireless audio receiver can be

paired with up to eight Bluetooth components. When

the ninth device is paired, the pairing settings for the

device which has not been used for the longest period

of time will be deleted.

• To cancel pairing, press kRETURN.

• You can also press and hold

eMEMORY on the front

panel to begin pairing.

SL SR

SBL SBR

Pairing

OPTION

VOL.

SL SR

SBL SBR

Searching...

DOCK

VOL.

Continues to the

1 : This unit supports A2DP (Advanced Audio Distribution Profile)

of the Bluetooth profile.

PLAYBACK

Playing back tunes from Bluetooth™ components

En 65

Make sure the Bluetooth component

recognizes the Bluetooth wireless audio

receiver.

When the device is recognized, it will appear in the

Bluetooth component list, for example as “YBA-10

YAMAHA.”

Select the Bluetooth wireless audio receiver

from the Bluetooth component list, and

enter a pass key “0000” into the Bluetooth

component. J1

Using Bluetooth™ components

When pairing is complete, perform the following

procedure to achieve a wireless connection between this

unit and the Bluetooth component. When the wireless

connection is complete, Bluetooth components can be

played back.

Press dDOCK to switch to the DOCK input.

Press tOPTION to display the OPTION

menu.

Use kCursor B / C to select “Connect” and

press kENTER. J2

Operate the Bluetooth component for

playback.

DOCK

kCursor B / C

kENTER

tOPTION

ENTER

DOCK

OPTION

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

REE

RESET

DMI

UDI

AUX

DMI

MULTI

NER

TUNING

SL SR

SBL SBR

Completed

DOCK

VOL.

When pairing occurs correctly

Depending on Bluetooth components, a wireless

connection is established automatically or by

operating the Bluetooth components. In that case, it is

not necessary to carry out the following procedure.

“Not found” is displayed when there is an error

connecting. Check that the following conditions have

been satisfied, and try to establish a wireless

connection again.

• Both this unit and the Bluetooth component are paired.

• The Bluetooth component is switched on.

• The Bluetooth component is within 10 m of the

Bluetooth wireless audio receiver.

To disconnect a wireless connection, repeat the same

steps, and in step 3, select “Disconnect.”

SL SR

SBL SBR

BTconnected

DOCK

VOL.

When wireless connection is complete

1 : Depending on Bluetooth components, wireless connection is

carried out right after the pairing. In this case, “BT connected” is

displayed instead of “Completed.”

2 : “Disconnect” is displayed when a Bluetooth component has been

connected.

En 66

SETUP

Settings, such as the name of an input source or the icon displayed for an input source can be changed from the Input menu.

Configuring input sources

The name of an input source and its icon, as well as other

input source settings, can be changed from the Input

menu displayed on the TV screen.

Press jON SCREEN.

Use kCursor B / C to select “Input” and

press kENTER.

Use kCursor D / E to select an input source

to be configured and press kCursor B.

Use kCursor B / C to select an item and

press kENTER.

Use kCursor B / C to adjust the setting.

Press jON SCREEN to close the menu.

Configuring input sources (Input menu)

jON SCREEN

kCursor B / C / D / E

kENTER

kRETURN

RETURN

ENTER

ON SCREEN

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

If the selected item contains additional items, use

kCursor B / C to select the desired item and press

kENTER.

Pressing kRETURN displays the previous menu

screen. Repeat steps 4 to 5 to adjust multiple settings.

SETUP

Configuring input sources (Input menu)

En 67

Input menu

■

Changing an input source name or

icon

Rename/Icon Select

Input source: HDMI1-5, AV1-6, AUDIO1-2, V-AUX, DOCK

(iPod), DOCK (Bluetooth), MULTI CH

Changes the input source name (up to nine characters)

and icon displayed on the front panel display or TV

screen.

Use kCursor B / C repeatedly to select

“Rename/Icon Select” and press kENTER.

Use kCursor D / E to choose an icon and

press kCursor C.

Press kENTER, and then press

kCursor B / C / D / E to edit the new input

name.

Press kENTER and press kCursor C to

select “OK” and press kENTER.

Confirm the new input name.

kCursor B / C / D / E

kENTER

ENTER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

REE

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

HDMI1-5 Rename/

Icon Select

Audio In Decoder

Mode

Enhancer

AV 1 - 2 Rename/

Icon Select

Audio In Decoder

Mode

Enhancer

AV 3 - 4 Rename/

Icon Select

Decoder

Mode

Enhancer

AV 5 - 6 Rename/

Icon Select

Enhancer

AUDIO1-2 Rename/

Icon Select

Enhancer

V-AUX Rename/

Icon Select

Decoder

Mode

Enhancer

PHONO Rename/

Icon Select

Enhancer

TUNER Enhancer

DOCK (iPod) Rename/

Icon Select

Enhancer Standby

Charge

iPod

Interlock J1

DOCK (Bluetooth) Rename/

Icon Select

Enhancer

MULTI CH Rename/

Icon Select

Video Out

1 : Not available when playing back iPod/iPhone with wired

connection.

SETUP

Configuring input sources (Input menu)

En 68

■

Combining HDMI/AV1-2 input source

video and audio

Audio In

Input source: HDMI1-5, AV1-2

Combines video from HDMI or AV input sources with analog/

digital audio inputs in situations such as:

– an playback device is connected with an HDMI cable but cannot

transmit audio through HDMI

– an playback device with component video output and analog

audio output (such as certain game consoles) are connected to the

system

To change assignments, select an input source (HDMI1-5 or AV1-2)

as the video input first, and then select audio input jacks in this

menu.

Set as follows according on the desired combination of audio input

jacks.

■

Setting the format of digital audio signals

Decoder Mode

Input source: HDMI1-5, AV1-4, V-AUX J1

Sets the format of digital audio to playback to DTS. For example, if

the format is not automatically detected correctly even during

playback of DTS format audio, this item can be used to set the

playback format to DTS.

■

Selecting the sound program suitable for

listening to compressed audio, such as

MP3

Enhancer

Input source: All input sources other than MULTI CH

Turns on/off the Compressed Music Enhancer mode.

■

Charging an iPod™/iPhone™ in standby

mode

Standby Charge

Input source: DOCK (iPod)

Charges an iPod/iPhone stationed in the Universal Dock for iPod /

iPhone or iPod wireless receiver while the receiver is in standby

mode.

Audio inputs Settings method

Optical digital audio

input

Select AV1 or AV4. Connect the external component

audio cable to the optical digital jack for the selected

input.

Coaxial digital audio

input

Select AV2 or AV3. Connect the external component

audio cable to the coaxial digital jack for the selected

input.

Analog audio input Select one of AV5, AV6, AUDIO1, or AUDIO2.

Connect the external component audio cable to the

audio jack for the selected input.

Auto (Default) The audio format is automatically selected to match

the format of the input audio.

DTS Selects DTS signals only. Other input signals are not

reproduced.

Off (Default) Turns off the Compressed Music Enhancer mode.

On Turns on the Compressed Music Enhancer mode.

Auto (Default) This unit charges iPod/iPhone when this unit is in

standby mode. While charging an iPod/iPhone, the

HDMI Through/iPod Charge indicator lights. When

HDMI Through function is off, the indicator goes out

after the charging is complete.

Off This unit does not charge iPod/iPhone.

1 : AV5-6 or AUDIO1-2 are also available when “Audio Return Channel” is on,

and the input source is used for “TV Audio Input.”

En 69

SETUP

Configuring input sources (Input menu)

■

Setting the interlock functions with iPod/

iPhone (when a Yamaha iPod wireless

receiver is connected)

iPod Interlock

Input source: DOCK (iPod)

This unit can be automatically operated in conjunction with

operations on iPod when the iPod wireless receiver is connected to

this unit.

■

Outputting a video signal input from

another input source while playing a

multi-channel audio signal

Video Out

Input source: MULTI CH

When “MULTI CH” is selected as the input source, a video signal

input from another terminal can be output to the video monitor. For

example, even if an audio and video component such as a DVD

player that does not support a multi-channel digital audio output,

the video signal can be output to the video monitor while

reproducing a multi-channel analog audio signal.

Power & Input Starting playback of iPod/iPhone turns on this unit

and switches the input source to DOCK (iPod)

automatically when this item is set to “On.” This unit

automatically enters standby mode when iPod/iPhone

is not operated for a while after playback is stopped.

This interlock function is disable with “Off.”

Volume Adjusting the volume on the iPod/iPhone also adjusts

the volume of this unit when this item is set to “On.”

This interlock function is disable with “Off.”

SETUP

En 70

The SCENE function (☞p. 42) can be edited from the SCENE menu displayed on the TV screen.

Editing a scene

Various settings, such as the name of a scene or the icon

displayed for a scene, can be changed from the SCENE

menu.

Press jON SCREEN.

Use kCursor B / C to select “Scene” and

press kENTER.

Use kCursor D / E to select a scene to be

edited and press kCursor B.

Use kCursor B / C to select an item and

press kENTER.

Use kCursor B / C / D / E to adjust the

setting.

Press jON SCREEN to close the menu.

Editing the SCENE function (SCENE menu)

jON SCREEN

kCursor B / C / D / E

kENTER

kRETURN

RETURN

ENTER

ON SCREEN

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

When the Utility is available in the selected item, use

kCursor B / C to select the Utility and press

kENTER.

Pressing kRETURN displays the previous menu

screen. Repeat steps 4 and 5 to adjust multiple

settings.

En 71

SETUP

Editing the SCENE function (SCENE menu)

SCENE menu

■

Registering SCENE function settings

Save

Registers the setting currently applied to this unit for each SCENE.

■

Adjusting settings registered with the

SCENE function

Load

Loads input sources or sound programs that have been registered

with the SCENE function, or specifies whether or not an external

component registered as the input source is automatically turned on

when a scene is selected.

SCENE IR

Specify whether or not a Yamaha BD/DVD player or CD player

connected to this unit turns on automatically.

Detail

Display details of settings registered with the SCENE function.

Items indicated with a check mark in “Setting” are loaded.

SCENE1

SCENE2

SCENE3

SCENE4

Save

Load

Rename/Icon Select

Reset

Save

Load

Rename/Icon Select

Reset

Save

Load

Rename/Icon Select

Reset

Save

Load

Rename/Icon Select

Reset

Ok Loads items indicated with a check mark in “Setting.”

Cancel Cancels settings applied with “Setting.”

DETAIL Specifies “SCENE IR” function and displays settings

registered with the SCENE function in detail.

Foe more information, see “SCENE IR” and “Detail”

at right.

Off Disables the SCENE IR function.

Yamaha BD/DVD

Player1

Select this when a Yamaha BD/DVD player is

connected to this unit.

Yamaha BD/DVD

Player2

Select this if the player dose not turn on when

“Yamaha BD/DVD Player1” is selected.

Yamaha CD Player Select this when a Yamaha CD player is connected to

this unit.

Input Displays the “Input” setting registered with the

SCENE function.

Mode Displays the sound program registered with the

SCENE function.

Enhancer Displays the “Enhancer” setting registered with the

SCENE function.

SETUP

Editing the SCENE function (SCENE menu)

En 72

■

Changing a scene name and icon

Rename/Icon Select

Changes the scene name and icon displayed on the front

panel display or TV screen.

Use kCursor B / C repeatedly to select

“Rename/Icon Select” and press kENTER.

Use kCursor D / E to choose an icon and

press kCursor C.

Press kENTER, and then press

kCursor B / C / D / E to edit the new scene

name.

Press kENTER and press kCursor C to

select “OK” and press kENTER.

Confirm the new scene name.

■

Resetting a scene

Reset

Restores all settings to their default values.

Cursor B / C / D / E

kENTER

ENTER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

REE

DMI

UDI

AUX

DOCK

DMI

MULTI

RESET

NER

TUNING

SETUP

En 73

Sound effects can be adjusted from the Sound Program menu.

Editing sound programs

Adjust sound field elements (sound program parameters)

to achieve sound effects suited to the acoustics of audio/

video sources or rooms if you are not satisfied with the

results achieved with default sound program settings.

Follow the procedure described below to adjust sound

program parameters.

Press jON SCREEN.

Press kCursor B / C repeatedly to select

“Sound Program” and press kENTER.

Use kCursor D / E to select a sound

program and press kCursor B.

Use kCursor B / C to select a parameter

and press kENTER.

Use kCursor D / E to adjust the parameter

and press kRETURN. J1

Press jON SCREEN to close the Sound

Program menu.

Setting sound program parameters (Sound Program menu)

jON SCREEN

kCursor B / C / D / E

kENTER

kRETURN

RETURN

ENTER

ON SCREEN

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

DMI

UDI

AUX

DOCK

DMI

MULTI

RESET

NER

TUNING

Sound programs

Sound program parameters

Choices

When there are multiple parameters in the selected

sound program, repeat steps 4 and 5 to adjust other

parameters.

■ To initialize sound program parameters

To set the parameters of the sound program back to

their default settings, use kCursor B / C repeatedly

to select “Reset” in step 4 and press kENTER.

When the following message is displayed, select

“OK” and press kENTER to initialize.

To cancel initializing, select “CANCEL” and press

kENTER when the message above is displayed.

1 : An asterisk (*) appears on the left of the sound field parameter

name displayed on the TV when you change the parameter from

its default setting.

En 74

SETUP

Setting sound program parameters (Sound Program menu)

CINEMA DSP parameters

DSP Level

Change the effect level (level of the sound field effect to be added).

You can adjust the level of the sound field effect while checking the

sound effect.

Initial Delay

Surround Initial Delay

Surround Back Initial Delay

Initial delay. Presence, surround, and surround back sound field

initial delay. Changes the apparent size of the sound field by

adjusting the delay between the direct sound and the first reflection

heard by the listener. The smaller the value, the smaller the sound

field seems to the listener.

Room Size

Surround Room Size

Surround Back Room Size

Room size. Presence, surround, and surround back room size.

Adjusts the apparent size of the sound field. The larger the value,

the larger the surround sound field becomes. As the sound is

repeatedly reflected around a room, the larger the hall is, the longer

the time between the original reflected sound and the subsequent

reflections. By controlling the time between the reflected sounds,

you can change the apparent size of the virtual venue. Changing

this parameter from one to two doubles the apparent length of the

room.

Adjustable range -6 dB to +3 dB

Default setting 0 dB

Adjust “DSP Level” as follows:

• The effect sound is too soft.

• There are no differences between effects of the sound programs.

→ Increase the effect level.

• The sound is dull.

• The sound field effect is added too much.

→ Reduce the effect level.

Adjustable range 1 to 99 ms (Initial Delay)

1 to 49 ms (Surround Initial Delay and Surround Back

Initial Delay)

When you adjust the initial delay parameters, we also

recommend that you adjust the corresponding room size

parameters likewise.

Source sound

Delay

Audio source

Level

Early

reflections

Time

Large value = 99 ms

Reflection face

Time

Delay

Level

Time

Delay

Small value = 1 ms

Level

Adjustable range 0.1 to 2.0

When you adjust the room size parameters, we also recommend

that you adjust the corresponding initial delay parameters

likewise.

Level

Time

Level

Time

Level

Time

udio source

Early

reflections

Large value = 2.0Small value = 0.1

Source sound

En 75

SETUP

Setting sound program parameters (Sound Program menu)

Liveness

Surround Liveness

Surround Back Liveness

Liveness. Surround and surround back liveness. Adjusts the

reflectivity of the virtual walls in the hall by changing the rate at

which the early reflections decay. The early reflections of an audio

source decay much faster in a room with acoustically absorbent

wall surfaces than in one which has highly reflective surfaces. A

room with acoustically absorbent surfaces is referred to as “dead,”

while a room with highly reflective surfaces is referred to as “live.”

This parameter lets you adjust the early reflection decay rate and

thus the “liveness” of the room.

Reverb Time

Reverberation time. Adjusts the amount of time taken for the

dense, subsequent reverberation sound to decay by 60 dB at 1 kHz.

This changes the apparent size of the acoustic environment over an

extremely wide range. Set a longer reverberation time to get more

sustaining reverberation sound, and set a shorter time to get

articulate sound.

Reverb Delay

Reverberation delay. Adjusts the time difference between the

beginning of the direct sound and the beginning of the

reverberation sound. The larger the value, the later the

reverberation sound begins. A later reverberation sound makes you

feel as if you are in a larger acoustic environment.

Adjustable range 0 to 10

Level

Time

Level

Time

Level

Time

Large value = 10

Small value = 0

Source sound

Small reflected

sound

Large reflected

sound

Dead

Live

Adjustable range 1.0 to 5.0 s

Small value = 1.0 s

Reverberation Reverberation

Source sound

Early reflections

60 dB 60 dB 60 dB

Rev. Time Rev. Time Rev. Time

Audio source

Short

reverberation

Long

reverberation

Large value = 5.0 s

Time Time Time

Adjustable range 0 to 250 ms

Rev. Delay

Source sound

(dB)

60 dB

Reverberation

Time

Rev. Time

Level

SETUP

Setting sound program parameters (Sound Program menu)

En 76

Reverb Level

Reverberation level. Adjusts the volume of the reverberation

sound. The larger the value, the stronger the reverberation

becomes.

Decode Type

Selects a surround decoder to be used with a sound program in the

MOVIE category. J1

Parameters usable in certain sound

programs

2ch Stereo only

Direct

Automatically bypasses the DSP circuit and tone control circuit

depending on the condition of tone control etc., when an analog

audio source is played back. You can enjoy a higher quality sound.

7ch Stereo only

Center Level

Adjusts the center channel volume. J2

Surround L Level

Adjusts the volume of the surround L channel. J2

Surround R Level

Adjusts the volume of the surround R channel. J2

Surround Back L Level

Adjusts the volume of the surround back L channel. J2

Surround Back R Level

Adjusts the volume of the surround back R channel. J2

Front Presence L Level

Adjusts the volume of the front presence L channel. J2

Adjustable range 0 to 100%

PLIIx Movie

PLII Movie

Selects the Dolby Pro Logic IIx Movie (or

Dolby Pro Logic II Movie) decoder.

Neo:6 Cinema Selects the Neo:6 (Cinema) decoder.

Level

Source sound

Time

Rev. Level

Auto (Default) Outputs sound by bypassing the DSP circuit and tone

control circuit when both tone controls of “Bass” and

“Treble” are set to 0 dB.

Off Does not bypass the DSP circuit and tone control

circuit.

Adjustable range 0 to 100%

Default setting 100%

Adjustable range 0 to 100%

Default setting 100%

Adjustable range 0 to 100%

Default setting 100%

Adjustable range 0 to 100%

Default setting 35% (7.1-channel configuration)

50% (6.1-channel configuration)

Adjustable range 0 to 100%

Default setting 35% (7.1-channel configuration)

50% (6.1-channel configuration)

Adjustable range 0 to 100%

Default setting 33%

1 : Surround decoders cannot be changed when used with the following MOVIE

sound programs.

• Mono Movie

• Sports

• Action Game

• Roleplaying Game

2 : Not displayed when speakers are set to be inactive.

SETUP

Setting sound program parameters (Sound Program menu)

En 77

Front Presence R Level

Adjusts the volume of the front presence R channel. J1

Parameters usable in surround decoder

Decode Type

Selects a surround decoder.

Dolby PLIIx Music and Dolby PLII Music only

Panorama

Adjusts the soundscape of the front sound field. Sends front left/

right channels sounds to the surround speakers as well as the front

speakers for a wraparound effect.

Center Width

Spreads the center channel sound to the front left and right

speakers to suit your needs or preferences. Set this parameter to 0

for outputting the center sound from the center speaker only, or to 7

for outputting it from the front left/right speaker only.

Dimension

Adjusts the difference in level between the front sound field and

the surround sound field. You can adjust the difference in level

created by the software being played back to obtain the preferred

sound balance.

The surround sound gets stronger as you make the value more

negative, and the front sound gets stronger as you make the value

more positive.

When Neo:6 Music is selected

Center Image

Adjusts the front left and right channel output relative to the center

channel to make the center channel more or less dominant as

necessary.

Adjustable range 0 to 100%

Default setting 33%

Pro Logic Reproduces sound using the Dolby Pro Logic

decoder. This is suitable for all kinds of audio sources.

PLIIx Movie /

PLII Movie

Reproduces sound using the Dolby Pro Logic IIx (or

Dolby Pro Logic II) decoder. This is suitable for

movies. J2

PLIIx Music /

PLII Music

Reproduces sound using the Dolby Pro Logic IIx (or

Dolby Pro Logic II) decoder. This is suitable for

music. J2

PLIIx Game /

PLII Game

Reproduces sound using the Dolby Pro Logic IIx (or

Dolby Pro Logic II) decoder. This is suitable for

games. J2

Neo:6 Cinema Reproduces sound using the DTS Neo:6 decoder. This

is suitable for movies.

Neo:6 Music Reproduces sound using the DTS Neo:6 decoder. This

is suitable for music.

Off (Default) Disables the effect.

On Enables the effect.

Adjustable range 0 to 7

Default setting 3

Adjustable range -3 to +3

Default setting 0

Adjustable range 0.0 to 1.0

Default setting 0.3

1 : Not displayed when speakers are set to be inactive.

2 : You cannot select the Dolby Pro Logic IIx decoder in the following conditions:

• When “Surround Back” is set to “None” (☞

p. 80).

• When headphones are connected.

SETUP

En 78

Various settings, such as speaker volume or HDMI functions, can be changed from the Setup menu.

Operating the Setup menu

Press jON SCREEN.

Press kCursor B / C repeatedly to select

“Setup” and press kENTER.

Use kCursor D / E to select a menu and

press kENTER.

Setup menu setting

Use kCursor B / C to select an item and

press kENTER.

Use kCursor B / C / D / E to adjust the

setting.

Press jON SCREEN to close the menu.

Setting various functions (Setup menu)

jON SCREEN

kCursor B / C / D / E

kENTER

kRETURN

RETURN

ENTER

ON SCREEN

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

DMI

UDI

AUX

DOCK

DMI

MULTI

RESET

NER

TUNING

Speaker Adjusts parameters for speakers, such as

speaker status, and volume adjustment for

each speaker (☞p. 79).

Sound Sets functions related to audio output,

such as adjustment of maximum volume

and of dynamic range (☞p. 83).

Video Sets video output functions, such as video

conversion settings (resolution and aspect

ratio) (☞p. 84).

HDMI Sets HDMI functions, such as the HDMI

Control function and output destination

for HDMI sound (☞p. 85).

Multi Zone Sets multi-zone functions, such as

volume adjustment for speakers in the

secondary zone (☞p. 88).

Function Sets functions such as the Auto Power

Down function, that make the unit easier

to use (☞p. 88).

Language Selects the language of the menus and

messages displayed on TV screen

(☞p. 91).

When the selected item contains detailed ones, use

kCursor B / C to select the detailed item and press

kENTER.

Pressing kRETURN displays the previous menu

screen. Repeat steps 4 to 5 to adjust multiple settings.

En 79

SETUP

Setting various functions (Setup menu)

Setup menu Manages settings for speakers

Speaker Setup items

■

Automatic speaker setup

Auto Setup

Optimizes the speaker configuration automatically using YPAO

(☞

p. 32).

■

Manual speaker setup

Manual Setup

The following parameters can be specified manually.

Power Amp Assign

In addition to the 7.1-channel speaker connection, various speaker

configurations are possible using the presence speakers connection,

bi-amp connection or Zone2 function (☞

p. 17, p. 18).

Auto Setup

Manual Setup

Lipsync

Dynamic Range

Max Volume

Initial Volume

Adaptive DSP Level

Analog to Analog Conversion

Processing

Zone2 Set

Party Mode Set

Auto Power Down

Display Set

Trigger Output

Memory Guard

Speaker

Sound

Video

Multi Zone

Function

Language

HDMI Control

Control Select

ARC (Audio Return Channel)

TV Audio Input

Audio Output

Standby Through

HDMI

Auto Setup Optimizes the speaker configuration automatically.

Manual Setup Manually adjusts parameters for speakers.

Power Amp Assign Adds the extra speakers to the 7.1-channel speaker

connection.

Configuration Manually manages speaker configuration, such as

speaker size (sound production capacity), and bass

audio processing.

Distance Manually adjusts the output of each speaker based on

distance to the listening position.

Level Manually adjusts the volume of each speaker.

Parametric EQ Selects an equalizer to adjust speaker output

characteristics.

Test Tone Generates test tones.

SETUP

Setting various functions (Setup menu)

En 80

Configuration

Adjusts the output characteristics of the speakers based on

manually set parameters.

Front

Selects the size (sound reproduction capacity) of the front

speakers. J1

Center

Selects the size of the center speakers.

Surround

Selects the size of the surround speakers.

Surround Back

Selects the size of the surround back speakers.

Front Presence

Specify connection of front presence speakers.

In the “Configuration,” you can select the speaker size

characteristic (Large or Small). Select the size (sound

reproduction capacity) that matches your speakers.

When speaker size is set to “Small,” low-frequency components

of the speakers that you configured are produced from the

subwoofer (or from the front speakers if there is no subwoofer).

Woofer diameter

• 16 cm or larger → Large

• 16 cm or smaller → Small

Large Select this for large speakers. The front speakers will

produce all of the front channel frequency

components.

Small (Default) Select this for small speakers. The subwoofer will

produce front channel low-frequency

components. J2

Large Select this when a large center speaker is connected.

Small (Default) Select this when a small center speaker is connected.

None Select this when there is no center speaker. The front

speakers will produce center channel audio.

Large Select this when the surround speakers are large.

Small (Default) Select this when the surround speakers are small.

None Select this when no surround speakers are connected.

The front speakers will produce surround channel

audio signals.

• When set to “None,” no sound is produced from the surround

back speaker even if that speaker is connected.

• When set to “None,” the sound programs will change to Virtual

CINEMA DSP mode.

Largex1 Select when one large surround back speaker is

connected.

Largex2 Select when two large surround back speakers are

connected.

Smallx1 Select when one small surround back speaker is

connected.

Smallx2 (Default) Select when two small surround back speakers are

connected.

None Select this when no surround back speakers are

connected.

• When there are no surround speakers are connected, the setting

will automatically change to “None.”

• You can set surround back audio signals, including from the

playback source, to be mixed down and produced from a single

speaker (6.1-channel layout) or produced from left and right

surround speakers (5.1-channel layout).

Use (Default) Select this when front presence speakers are

connected.

None Select this when front presence speakers are not

connected.

1 : When “Subwoofer” is set to “None,” you can only choose “Large.” If the front

speaker setting is “Small” and you change “Subwoofer” to “None,” it will

automatically change to “Large.”

2 : You can set the low-frequency components of audio signals transmitted from

the front speakers to the subwoofer by using “Bass Cross Over.”

SETUP

Setting various functions (Setup menu)

En 81

Subwoofer

Confirms the subwoofer.

Phase

Sets the phase of the subwoofer if the bass audio is lacking or

unclear.

Extra Bass

Allows the front channel low-frequency components to be

produced exclusively by the subwoofer, or by both the subwoofer

and the front speakers.

Bass Cross Over

Sets the lower limit of low-frequency component which is

produced from speakers of which the size is set to “Small.”

A frequency sound which is lower than the specified frequency will

be produced from the subwoofer or the front speakers. J2

Distance

Adjusts the timing at which the speakers produce audio so that

sounds from the speakers reach the listening position at the same

time.

Selecting adjustment units

Use kCursor B / C to select the unit for distance (meters or

feet), and press kENTER.

Setting distances for each speaker

Use kCursor B / C to select the speaker you want to configure,

and press kENTER. Then use kCursor D / E to set the distance

from the speaker to your listening position.

Level

Separately adjusts the volume of each speaker.

Use kCursor B / C to select the desired speaker, and press

kENTER. Then use kCursor D / E to adjust the volume for the

selected speaker.

Use (Default) Select this when subwoofer is connected. During

playback, the subwoofer will produce audio from the

LFE (low-frequency effect) channel and bass audio

from other channels. J1

None Select this when subwoofer is not connected. The

front speakers will produce audio from the LFE (low-

frequency effect) channel and bass frequency audio

from other channels.

Normal (Default) Does not change the subwoofer phase.

Reverse Reverses the subwoofer phase.

Off (Default) Depending on the size of the front speakers, either the

front speakers or the subwoofer produce the front

channel low-frequency components.

On The subwoofer and the front speakers produce the

front channel low-frequency components.

When “Subwoofer” is set to “None” or “Front” is set to “Small,”

“Extra Bass” is disabled.

40Hz 110Hz

60Hz 120Hz

80Hz (Default) 160Hz

90Hz 200Hz

100Hz

Adjustable range 1.0 ft to 80.0 ft (0.30 m to 24.0 m)

Default setting 10.0 ft (3.00 m) (Front L/Front R/Center/Surround L/

Surround R/Surround Back L/Surround Back R/

Front Presence L/Front Presence R/Subwoofer)

Adjustment

increments

0.2 ft (0.05 m)

Adjustable range -10.0 dB to +10.0 dB

Default setting 0.0 dB (Front L/Front R/Center/Surround L/

Surround R/Surround Back L/Surround Back R/

Front Presence L/Front Presence R/Subwoofer)

Adjustment

increments

0.5 dB

1 : Enabling “Extra Bass” allows both the subwoofer and the front speakers to

produce bass audio.

2 : If your subwoofer has a volume control or a crossover frequency control, set

the crossover frequency to maximum and the volume to half (or slightly less).

SETUP

Setting various functions (Setup menu)

En 82

Parametric EQ

Adjusts sound quality of tone using a parametric

equalizer.

PEQ Select

Select an equalizer type.

PEQ Data Copy

Select 1 of the 3 parametric equalizer types acquired with

automatic setup and manually copy that information to the

manual adjustments.

Front L / Front R / Center / Surround L / Surround R /

Surround Back L / Surround Back R / Front Presence L /

Front Presence R

The parametric equalizer can be used to manually adjust

sound quality for individual speakers.

Set “PEQ Select” to “Manual” and use “PEQ Data

Copy” to copy information acquired with automatic

setup. This information can be used as a basis for

performing manual adjustments.

Use kCursor B / C repeatedly to select

“Band / Gain,” “Freq. / Gain,” or “Q / Gain”

and press kENTER.

Use kCursor D / E repeatedly to adjust the

parameter and use kCursor B / C

repeatedly to adjust the gain.

Press kENTER to exit the edit window.

Repeat steps 1 to 3 to configure other

parameters.

Press jON SCREEN to close the menu.

Test Tone

Turns the test tone generator on or off.

ENTER

ON SCREEN

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

jON SCREEN

kCursor B / C / D / E

kENTER

Manual Manually adjust equalizer sound.

Flat Adjust individual speakers to achieve the

same characteristics. Select this option if

speakers offer the same quality.

Front Adjust individual speakers to achieve the

same characteristics as the front left and

right speakers. Select this option if front

left and right speakers offer significantly

greater quality than other speakers.

Natural Adjust all speakers to achieve a natural

sound. Select this if high-frequency

sounds seem too strong when “PEQ

Select” is set to “Flat.”

Through (Default) Disable the equalizer.

Flat > Manual Copy the “Flat” parametric equalizer

information acquired with automatic

setup.

Front > Manual Copy the “Front” parametric equalizer

information acquired with automatic

setup.

Natural > Manual Copy the “Natural” parametric equalizer

information acquired with automatic

setup.

To reset all parameter settings for the selected

speaker, select “Reset to Flat” and press kENTER.

Off (Default) Does not generate test tones.

On Generates test tones. While “On” is

selected, test tones are produced

constantly.

You can use the test tone in a variety of

circumstances. For example, you can adjust the

volume balance settings for each speaker, or whenever

you adjust the settings on the internal parametric

equalizer, you can listen to the actual effect while

operating this unit. Turn the test tone off when you

have finished making adjustments.

SETUP

Setting various functions (Setup menu)

En 83

Setting the audio output function of this

unit

Sound Setup items

■

Synchronizing audio/video output

Lipsync

Adjusts the delay between audio and video output (Lipsync

function).

Mode

Selects a compensation method for the delay between audio and

video output.

Delay

■

Auto-adjusting Dolby Digital and DTS

dynamic range

Dynamic Range

Selects the dynamic range adjustment method for audio bitstream

(Dolby Digital and DTS) signal playback.

■

Setting the maximum volume

Max Volume

Specify the maximum volume level so that sound is not too loud.

The default setting of +16.5 dB produces the highest volume.

Lipsync Adjusts the delay between video and audio output.

Dynamic Range Selects the dynamic range adjustment method for

Dolby Digital and DTS playback.

Max Volume Sets the maximum volume for this receiver.

Initial Volume Sets the initial volume for when this receiver is turned

on.

Adaptive DSP Level Adjusts the level of DSP effect in conjunction with the

volume level.

Auto (Default) J1 When connecting to a TV via HDMI, automatically

adjusts output timing if the TV supports an automatic

lipsync function.

Manual Manually adjusts the correction time. Select this when

the monitor does not support the automatic lipsync

function.

Adjustable range 0 ms to +250 ms

Default setting 0 ms

Adjustment

increments

1 ms

MAX (Default) Produces audio without adjusting the dynamic range.

STD Adjusts the dynamic range for optimum volume for

regular home use.

MIN/AUTO (MIN) Sets the dynamic range suitable for low

volume or a quiet environment, such as at night, for

bitstream signals except for Dolby TrueHD signals.

(AUTO) Adjusts the dynamic range for Dolby

TrueHD signals based on input signal information.

Adjustable range -30.0 dB to +16.5 dB (maximum volume)

Default setting +16.5 dB

Adjustment

increments

5.0 dB

1 : This setting is effective at the HDMI OUT jack selected by using

rHDMI OUT.

SETUP

Setting various functions (Setup menu)

En 84

■

Setting the startup volume

Initial Volume

Sets the initial volume for when this receiver is turned on. When

this parameter is set to “Off,” the volume is set at the level when the

receiver last entered standby mode. J1

■

Adjusting DSP effect and volume level

Adaptive DSP Level

Automatically adjust the level of DSP effect in conjunction with

the volume level.

Setting this unit’s video output function

Video Setup items

■

Analog-to-analog video conversion

Analog to Analog Conversion

Enables or disables video conversion between analog video jacks.

Adjustable range Off, Mute, -80 dB to +16.5 dB

Default setting Off

Adjustment

increments

0.5 dB

Off Disables automatic adjustment of the level of DSP

effect.

On (Default) Adjusts the degree of DSP effect in conjunction with

volume level. The higher the volume level, the less the

DSP effect applied. The lower the volume level, the

greater the DSP effect applied.

Analog to Analog

Conversion

Enable or disable video conversion between analog

video jacks.

Processing Enable or disable adjustment of resolution and aspect

ratio for video signal converted to HDMI video.

Off Disables video conversion between analog video

jacks.

On (Default) Enables video conversion between analog video jacks.

• Analog-to-HDMI video conversion is always possible unless

video signals are being input at the HDMI input jacks or 1080p-

resolution analog video signals are being input (☞

p. 113).

• This unit does not convert 480 line video signals and 576 line

video signals interchangeably.

• 480p-, 576p-, 1080i- and 720p-resolution video signals can not

be output at the VIDEO MONITOR OUT jack (☞

p. 113).

• The converted video signals are only output at the MONITOR

OUT jacks.

• When composite video signals from a VCR are converted into

component video signals, the picture quality may suffer

depending on your VCR.

• Unconventional signals input at the composite video jacks cannot

be converted or may be output abnormally. In such cases, set

“Analog to Analog Conversion” to “Off.”

1 : When you set “Max Volume” at a lower level than “Initial Volume,” “Max

Volume” has priority.

SETUP

Setting various functions (Setup menu)

En 85

■

Adjusting resolution and aspect ratio with

conversion of video signal to HDMI

Processing

Adjust resolution and aspect ratio with conversion of video input to

HDMI video (upscaling).

Resolution

Aspect

Setting HDMI functions

HDMI Setup items

Off (Default) Resolution and aspect ratio are not adjusted with

processing.

On Resolution and aspect ratio are adjusted with

processing.

Auto (Default) Automatic upscaling in accordance with TV

resolution.

480p Upscaling to 480p (576p).

720p Upscaling to 720p.

1080i Upscaling to 1080i.

1080p Upscaling to 1080p.

Through No upscaling.

• The 720p-, 1080i- and 1080p-resolution video signals cannot be

upscaled (☞

p. 113).

• When a TV is connected to this unit via the HDMI jack, this unit

automatically detects a resolution that the TV supports. Only the

detected resolution can be selected.

• If this unit cannot detect the resolution that the TV supports, set

“MON.CHK” in the Advanced Setup menu to “SKIP” (☞

p. 97)

and try again.

Through (Default) The aspect ratio of HDMI video signal sources is not

adjusted.

16:9 Normal Transmits 4:3 aspect ratio video signals to a 16:9 TV

with black bands on either side of the screen.

• The Aspect setting is automatically disabled when “Resolution”

is set to “Through.”

• The Aspect setting is automatically disabled for video input with

aspect ratios other than 4:3.

• Changing the aspect ratio of 720p, 1080i, or 1080p has no effect.

HDMI Control Turns the HDMI Control on or off.

Control Select Choose an HDMI OUT jack on which HDMI

Control function is enabled.

ARC (Audio Return

Channel)

Turns the Audio Return Channel function on or

off.

TV Audio Input Chooses automatically selected audio input in

conjunction with TV operation when the

HDMI Control is turned on.

Audio Output Specifies whether or not audio signal is output

through this unit and a TV connected via the

HDMI OUT 1-2 jacks.

Standby Through J1 Turns the Standby Through function on or off.

1 : This item appears depending on “HDMI Control.”

SETUP

Setting various functions (Setup menu)

En 86

■

Receiver operation via TV (HDMI Control)

HDMI Control

Set the HDMI Control function to “On” to operate devices

connected via HDMI. If the TV or other external components

support HDMI Control (e.g., Panasonic VIERA Link), you can use

the remote controls of those devices to operate some of this unit’s

functions, and to synchronize this unit with the operation of those

devices.

Refer to “Using the HDMI Control function” (☞

p. 99) for setting

instructions.

■

Selecting an HDMI OUT jack for the HDMI

Control function

Control Select

Select the HDMI OUT jack that utilizes the HDMI Control

function.

Refer to “Using the HDMI Control function” (☞

p. 99) for setting

instructions.

■

Listening to TV audio via single HDMI

cable (Audio Return Channel)

ARC (Audio Return Channel)

You can enable or disable the Audio Return Channel function.

When using a TV that supports Audio Return Channel function and

the function is enabled, the TV’s audio output is transmit to this

unit via an HDMI cable.

The TV audio input to this unit is regarded as the input source

selected in “TV Audio Input.” J2

By means of this function, you do not need to connect the TV’s

audio output (digital audio output or analog audio output) to the

unit.

When the TV audio is input to the unit using Audio Return

Channel, “TV” is displayed on the front panel display.

■

Selecting an input source to assign audio

input for the TV

TV Audio Input

Select the input source that receives audio signals from TV while

the HDMI Control function is on.

When using a TV that supports Audio Return Channel function and

the function is enabled, the audio input for the TV is assigned to

the input source selected here. J2

TV1

TV2

Off (Default) Sets HDMI Control to “Off.”

On Sets HDMI Control to “On.” J1

If this unit is connected to HDMI devices that do not support the

HDMI Control function, these functions will not operate.

Out1(TV1) Applies the HDMI Control function for the HDMI

OUT 1 jack.

Out2(TV2) Applies the HDMI Control function for the HDMI

OUT 2 jack.

Off (Default) Sets the Audio Return Channel to “Off.”

On Sets the Audio Return Channel to “On.”

• “ARC (Audio Return Channel)” is enabled only for the HDMI

OUT 1 or 2 jack selected with “Control Select.”

• Refer to “Single HDMI cable input to TV audio with Audio

Return Channel function” (☞

p. 101) for setting instructions.

SL SR

SBL SBR

AV4

VOL.

Audio input AV1-6 or AUDIO1-2

Default setting AV 4

Audio input AV1-6 or AUDIO1-2

Default setting AV 1

• “TV Audio Input” is enabled only for the HDMI OUT 1 or 2 jack

selected with “Control Select.”

• Refer to “Switching the input source on this unit automatically

when listening to TV audio” (☞

p. 100) for instructions.

1 : When the HDMI Control is “On,” the Standby Through function is

automatically enabled. When this unit enters standby mode, the audio and

video signals from the last-selected HDMI input source will continue to be

transmitted to the TV. The HDMI input source can only be changed using the

remote control.

2 : While the Audio Return Channel function is on, the jack selected for the input

source cannot be used.

En 87

SETUP

Setting various functions (Setup menu)

■

Specify whether or not audio signal is

output through this unit and a TV

Audio Output

Choose whether audio is played back through this unit or through a

TV.

Amp

Specify whether or not audio signal is output through this unit.

OUT1

Specify whether or not audio signal is output through a TV

connected via the HDMI OUT 1 jack.

OUT2

Specify whether or not audio signal is output through a TV

connected via the HDMI OUT 2 jack.

■

Transmitting HDMI audio/video to the TV

during standby mode (Standby Through)

Standby Through

This function allows audio/video signals from HDMI inputs to

continue to be transmitted to a TV when this unit is in standby

mode.

When the Standby Through function is “On,” audio/video signals

continue to be output to the TV from the last

HDMI input source

before this unit enters standby mode.

The HDMI input source can be

selected using dHDMI1-5 or dV-AUX in standby mode.

Off Audio is not output through this unit.

On (Default) Audio is output through this unit. When this setting is

selected, audio from the external component is output

in a format compatible with this unit.

Off (Default) Audio is not output through a TV connected via the

HDMI OUT 1 jack.

On Outputs audio through a TV connected via the HDMI

OUT 1 jack. When this setting is selected, audio from

the external component is output in a format

compatible with the TV.

Off (Default) Audio is not output through a TV connected via the

HDMI OUT 2 jack.

On Outputs audio through a TV connected via the HDMI

OUT 2 jack. When this setting is selected, audio from

the external component is output in a format

compatible with the TV.

Off (Default) Sets Standby Through to “Off.”

On Transmits audio/video signals from the selected

HDMI input source to the TV.

• When “HDMI Control” is “On,” Standby Through function is

automatically enabled and “Standby Through” is not displayed.

• When the Standby Through function is on, the HDMI Through/

iPod Charge indicator on the front panel lights during the standby

mode. This unit consumes approximately 3 W of power.

En 88

SETUP

Setting various functions (Setup menu)

Setting this unit’s multi-zone function

Multi Zone Setup items

■

Adjusting Zone2 volume

Zone2 Set

Max Volume

Specify the maximum volume level in Zone2 so that sound is not

too loud.

Initial Volume

Specify the initial volume level in Zone2 when this unit is turned on.

■

Setting the party mode

Party Mode Set

In party mode, the main zone sources can be played in Zone2

simultaneously (☞

p. 104). Select “Zone2,” and then select

“Enable” or “Disable.”

Making the receiver easier to use

Function Setup items

Zone2 Set Adjusts Zone2 volume level.

Party Mode Set Enable or disable the party mode function.

Adjustable range -30.0 dB to +16.5 dB (maximum volume)

Default setting +16.5 dB

Adjustment

increments

5.0 dB

Adjustable range Off, Mute, -80 dB to +16.5 dB

Default setting Off

Adjustment

increments

0.5 dB

Enable (Default) Enables the party mode function.

Disable Disables the party mode function.

Auto Power Down This unit enters standby mode if no operations are

performed.

Display Set Specifies menu items displayed on TV screen and the

front panel.

Trigger Output Specifies TRIGGER OUT jack function.

Memory Guard Protects some settings against accidental

modification.

En 89

SETUP

Setting various functions (Setup menu)

■

Goes enter standby mode automatically

when you leave it without operating

Auto Power Down

If you do not operate this unit or use the remote control for an

extended period of time, it will automatically go into standby mode

(Auto Power Down function). This function’s default setting is

“Off.” When you want to enable this function, set the amount of

time to pass before this unit will enter standby.

■

Specifying menu display

Display Set

Specify front panel display brightness and TV screen wall paper.

Front Panel Display

Specify front panel display brightness and message scroll pattern.

Wall Paper

Specify the wall paper displayed on the TV screen when no video

signal is input. Select one that you prefer.

4hours Goes into standby mode, when you have not operated

this unit for four hours.

8hours Goes into standby mode, when you have not operated

this unit for eight hours.

12hours Goes into standby mode, when you have not operated

this unit for twelve hours.

Off (Default) Auto Power Down function is disabled.

This unit starts a countdown of 30 seconds before entering the

standby mode. Pressing any key of the remote control during the

countdown cancels entering the standby mode and reset the

timer.

Dimmer Adjustable range: -4 - 0

Reduce brightness of the front panel display. As the

value is lowered, the panel display darkens.

Scroll Selects the manner in which display scrolls when the

total number of characters exceeds the display area on

the front panel display.

Select “Continue” for continuous scrolling of all

characters.

Select “Once” to scroll through all characters once

and then halt scrolling for display of only the first 14

characters.

Picture Displays an image on the TV screen when there is no

video signal.

Gray Displays a gray background on the TV screen when

there is no video signal.

En 90

SETUP

Setting various functions (Setup menu)

■

Setting TRIGGER OUT functions

Trigger Output

Sets the TRIGGER OUT jack to function synchronized with power

status of each zone or input switching.

Trigger Mode

Specify the condition for the TRIGGER OUT jack to function.

Target Zone

Specify the zone with which the TRIGGER OUT jack functions

synchronized.

Target Source

Specify the output level of the electronic signal transmitted with

each input switching.

Manual

Manually switch the output level for electronic signal transmission.

This setting can also be used to confirm proper function of the

external component connected via the TRIGGER OUT jack.

Power (Default) The TRIGGER OUT jack functions synchronized

with the power status of the zone specified with

“Target Zone.”

Source The TRIGGER OUT jack functions synchronized

with the input switching in the zone specified with

“Target Zone.”

Electronic signal is transmitted according to the

setting made in “Target Source.”

Manual Select this to manually switch the output level for

electronic signal transmission with “Manual.”

Main (Default) When “Trigger Mode” is set to “Power,” electronic

signal transmission is synchronized with power status

of the main zone.

When “Trigger Mode” is set to “Source,” electronic

signal transmission is synchronized with input

switching in the main zone.

Zone2 When “Trigger Mode” is set to “Power,” electronic

signal transmission is synchronized with power status

of Zone2.

When “Trigger Mode” is set to “Source,” electronic

signal transmission is synchronized with input

switching in Zone2.

All When “Trigger Mode” is set to “Power,” electronic

signal transmission is synchronized with power status

of the main zone or Zone2.

When “Trigger Mode” is set to “Source,” electronic

signal transmission is synchronized with input

switching in the main zone or Zone2.

Low Stops the electronic signal transmission when you

switch to the input source specified in this option.

High (Default) Transmits the electronic signal when you switch to the

input source specified in this option.

This setting is available only when “Trigger Mode” is set to

“Source.”

Low Stops the electronic signal transmission.

High (Default) Transmits the electronic signal.

This setting is available only when “Trigger Mode” is set to

“Manual.”

SETUP

Setting various functions (Setup menu)

En 91

■

Prohibiting setting changes

Memory Guard

Prohibits setting changes to prevent careless changes being made

to the settings on Setup menu.

Language

Select the language used for display of menus and messages. J1

Choices: English (English), (Japanese), (French),

(German), (Spanish),

(Russian)

Off (Default) Settings are not protected.

On Prohibits changes to the settings on Setup menu until

it is returned to “Off.”

While set to “On,” the unit displays “Memory

Guard!” when an attempt is made to change the

settings.

1 : Content window information is displayed in the language in which that

information was released.

SETUP

En 92

A variety of information for this unit can be displayed.

Selecting information

Press jON SCREEN.

Use kCursor B / C to select “Information”

and press kENTER.

Use kCursor D / E to select an Information

menu and press kENTER.

■

Audio information

Displays information on the current audio signal.

■

Video information

Displays information on the current video signal.

■

HDMI monitor

Displays information on the TV screen connected to this

unit’s HDMI OUT 1-2 jacks.

■

System information

Displays information on the current settings of “Remote

ID,” “TV Format” and “Speaker Impedance.”

■

Zone information

Displays information on Zone2 settings.

Confirming information of this unit (Information menu)

jON SCREEN

kCursor B / C / D / E

kENTER

ENTER

ON SCREEN

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

OPTION

DMI

UDI

AUX

DOC

HDMI

MULTI

RESET

NER

TUNING

Format Signal format. When this unit is unable to

detect a digital signal, it automatically

switches to analog input.

Sampling The number of samples taken per second

from a continuous signal to make a

discrete signal.

Channel The number of source channels in the

input signal (front/surround/LFE). For

example, a multi-channel soundtrack with

3 front channels, 2 surround channels and

LFE is displayed as “3/2/0.1”.

Bitrate The number of bits passing a given point

per second.

Dialogue The dialogue normalization level preset

to the current input bitstream signal.

• “___” is displayed when this unit cannot display the

corresponding information.

• Some high-definition audio bitstream contents may not

include the discrete surround back left and right

channel signals, but are encoded at a bitrate of 192

kHz.

• Even when direct bitstream output settings are applied,

some players convert the Dolby TrueHD or Dolby

Digital Plus bitstreams to the Dolby Digital bitstreams,

while converting DTS-HD Master Audio or DTS-HD

High Resolution Audio bitstreams to DTS bitstreams.

HDMI signal Source video signal type and video signal

output to this unit’s HDMI OUT 1-2

jacks.

HDMI Resolution Input signal (analog or HDMI) and output

signal (HDMI) resolution.

Analog Resolution Resolution of the source video signal and

the analog video signal output to this

unit’s MONITOR OUT jacks.

HDMI Error Error message for HDMI sources or

connected HDMI devices (☞p. 105).

Interface Displays information on the current

connection interface.

Video Resolution Displays the frequency for each video

resolution of the TV currently connected.

SETUP

En 93

You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code).

The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.

Selecting input source connected to DVD

player

Selecting input source connected to CD

player

Keys connecting external

components

cSOURCE A

Switches an external component on and off.

Cursor, kENTER, kRETURN

Operates the menus of external components.

DISPLAY

Switches an external component display.

External component operation keys

Functions as a recording or playback key of an external

component, or a menu display key.

mNumeric keys

Functions as numeric keys of an external component.

nTV control keys J1

Controlling other components with the remote control

cSOURCE A

dInput selector

kCursor B / C / D / E

kENTER

kRETURN

lExternal component

operation keys

lDISPLAY

mNumeric keys

nTV control keys

nINPUT

nMUTE

nTV VOL +/-

nTV CH +/-

pSOURCE/RECEIVER

RETURN

HDMI

AUDIO

1234

125

V-AUX

ENTER

7856

1234

REC

TV VOL TV CH

TOP

POP-UP

DISPLAY

SOURCE

RECEIVER

INPUT

MUTE

DOCK

MULTI

1234

PHONO

TUNER

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

AIN

NE 2

CODE SE

HDMI

OUT

PTION

REE

RESET

TUNING

Playback/Stop

DVD player

CD player

If you are unable to operate this unit after operating

an external component, light up

pSOURCE/RECEIVER in orange by pressing it,

and then try operating the remote control again.

Playback/Stop

DVD player

CD player

The remote control keys for controlling external

components are available only when the external

components have corresponding control keys.

nINPUT Switches video inputs of TV.

nMUTE Mutes TV volume temporarily.

nTV VOL +/- Controls the volume of TV.

nTV CH +/- Switches TV channels.

nA Turns on and off TV.

1 : When remote control codes for external components are

registered with

dInput selector or nA (nTV control

keys), the following operations are possible.

• When a TV remote control code is registered with

dInput

selector, the

kCursor, mNumeric keys and nTV

control keys can be used to control the TV selected with

dInput selector.

• When a remote control code for a device other than a TV is

registered with

dInput selector, keys including the

kCursor and mNumeric keys can be used to control

external components, and the

nTV control keys can be used

to control the TV registered with

nA.

• When a TV remote control code is registered with nA, only

nTV control keys can be used to control the TV.

SETUP

Controlling other components with the remote control

En 94

Default remote control code

settings

The following remote control codes are assigned to input

sources as factory default settings. For a complete list of

available remote control codes, refer to “Remote Control

Code Search” in the CD-ROM.

Registering remote control codes

for external component operations

The following section describes how to register remote

control code using an example of the registration of the

remote control codes of a Yamaha BD player connected

to HDMI2 jack.

Use “Remote Control Code Search” in the CD-

ROM to search the available remote control

codes from the category or manufacturer of

external components.

“2064” can be used for a Yamaha BD player.

Press oCODE SET using a pointed object

such as the tip of a ballpoint pen.

Press dHDMI2 to switch the input source to

HDMI2. J1

Perform the following steps to register the selected

input source here to the remote control code.

dHDMI2

nTV control keys

oCODE SET

TV VOL TV CH

CODE SET

INPUT

MUTE

ENE

RET

OLUME

ENHAN

R. DE

TRAI

LEEP

RE DIRE

ART

MUS

RADI

MUTE

ENTER

TOP

MEN

P-

PLAY

SOU

MAIN

ZONE 2

RECEIVE

PTI

ON SCREE

HDMI

-A

DMI OUT

EMORY

TUNER

TUNIN

Input Category Manufacturer

Remote

control code

HDMI1 Blu-ray player/

recorder

Yamaha 2064

HDMI2 —— —

HDMI3 —— —

HDMI4 —— —

HDMI5 —— —

AV1 —— —

AV2 —— —

AV3 CD player Yamaha 5095

AV4 —— —

AV5 —— —

AV6 —— —

AUDIO1 —— —

AUDIO2 —— —

V-AUX —— —

PHONO —— —

DOCK —— —

TUNER —— —

• Perform each of the following steps within 1 minute.

Settings will be automatically stopped if more than 1

minute passes since the last operation. To reset, repeat

from step 2.

• Remote control code of an external component cannot

be set from the name or model number of a unit. Use

“Remote Control Code Search

” in the CD-ROM to

search the available remote control codes from the

category or manufacturer of external components.

• If multiple remote control codes exist, first set the first

code in the list, if it does not work then try the other

codes.

SOURCE

RECEIVER

CODE SET

MAI

HDM

blinks twice

Continues to the

1 : When you want to register a remote control code to the

nTV control keys, press nA (nTV control keys) in step

SETUP

Controlling other components with the remote control

En 95

Enter a remote control code “2064” using

mNumeric keys. J1

Once the remote control code is registered successfully

pSOURCE/RECEIVER will blink twice.

To switch between BD player linked to

scene selections, press iSCENE and at the

same time press dHDMI2 and hold it for

approximately 3 seconds.

Then you can operate the external components by

switching the input source to HDMI2, or selecting

HDMI2 in the registered scene.

Same steps for operating other external components,

press

iSCENE and at the same time press the input

source key selected in step 3 and hold it for

approximately 3 seconds.

Resetting all remote control codes

Resetting all remote control codes for external

components to the initial factory settings.

Press oCODE SET using a pointed object

such as the tip of a ballpoint pen.

Press pSOURCE/RECEIVER on the remote

control.

Enter “9981” using mNumeric keys.

HDMI2

iSCENE

mNumeric keys

oCODE SET

pSOURCE/RECEIVER

SCENE

DVD

RADIO

7856

1234

SOURCE

RECEIVER

CODE SET

RETURN

OLUME

ENHAN

R. DE

TRAI

LEEP

RE DIRE

ART

MUS

MUTE

ENTER

TOP

MEN

P-

PLAY

MAIN

ZONE 2

INPUT

MUTE

HDMI

-A

DMI OUT

PTI

ON SCREE

EMORY

TUNER

TUNIN

• If the registration fails, repeat from step 2.

• In case of an external component with multiple remote

control codes, the other remote control codes may be

supported. Repeat from step 2 with the other remote

control codes.

2 0

SOURCE

RECEIVER

MAI

ODE SE

HDM

Registration successful: blinks twice

Registration failed: blinks 6 times

Perform each of the following steps within 1 minute.

Settings will be automatically stopped if more than 1

minute passes since the last operation. To reset, repeat

from step 1.

SOURCE

RECEIVER

CODE SET

MAI

HDM

blinks twice

Once the remote control code is reset successfully

pSOURCE/RECEIVER will blink twice.

If setup fails, repeat from step 1.

9 9

SOURCE

RECEIVER

MAI

ODE SE

HDM

Reset successful: blinks twice

Reset failed: blinks 6 times

1 : When you want to register a remote control code to the

nTV control keys, enter the TV remote control code in step 4.

SETUP

En 96

The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.

Displaying/Setting the Advanced Setup

Switch this unit to the standby mode.

Press MAIN ZONE A while pressing and holding

STRAIGHT on the front panel.

Release STRAIGHT when “ADVANCED SETUP” is displayed

on the front panel display.

After a few seconds, the top menu items are displayed.

Rotate PROGRAM selector to select the item to be

set from the following items.

In the Advanced Setup menu, you can set the following settings.

Press STRAIGHT repeatedly to select the value you

want to change.

Switch this unit to the standby mode, and then

switch it on again.

The settings become effective and the unit is powered on.

Setting the impedance of speakers

Changes the unit settings depending on the impedance of the

speakers connected. J2

Extended functionality that can be configured as needed (Advanced Setup menu)

PHONES

YPAO MIC

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFOZONE

CONTROL

ZONE2

MAIN ZONE

MEMORY

PRESET

STRAIGHT

PROGRAM selector

MAIN ZONE A

SP IMP. Sets the impedance of speakers.

REMOTE ID Changes the remote control ID of a receiver.

TV FORMAT Specifies the TV’s color encoding format.

MON.CHK Removes the up-scaling limitation on HDMI video

output.

TU J1 Selects one of the following FM/AM frequency steps.

INIT Initializes various settings for this unit.

6ΩMIN Select the impedance when 6 Ω speakers are

connected.

8ΩMIN (Default) Select the impedance when speakers above 8 Ω are

connected.

SPIMP.-8MIN

1 : Asia and General models only.

2 : For detailed procedures of speaker impedance settings, refer to “Changing

speaker impedance” (☞

p. 18).

SETUP

Extended functionality that can be configured as needed (Advanced Setup menu)

En 97

Avoiding crossing remote control

signals when using multiple

Yamaha receivers

The remote control of the unit can only receive signals

from a receiver which has an identical ID (remote

control ID). When using multiple Yamaha AV receivers,

you can set each remote control with a unique remote

control ID for its corresponding receiver.

On the contrary, if you are setting the same remote

control ID for all receivers, you can use one remote

control to operate 2 receivers.

Changing TV format

Change the color encoding format of OSD to PAL or

NTSC, to match the format used by the TV connected

via the HDMI OUT 1-2 or VIDEO (MONITOR OUT)

jack.

Removing HDMI video output up-

scaling limits

Removes the up-scaling limitation on video resolution

when this unit and a TV are connected via HDMI jacks.

If a resolution supported by the monitor cannot be

detected when configuring the up-scaling settings, this

setting will remove the output limitation.

Numeric keys

oCODE SET

pSOURCE/RECEIVER

7856

1234

SOURCE

RECEIVER

CODE SET

ENE

RETURN

OLUME

ENHAN

R. DE

TRAI

LEEP

RE DIRE

ART

MUS

RADI

MUTE

ENTER

TOP

MEN

P-

PLAY

MAIN

ZONE 2

INPUT

MUTE

PTI

ON SCREE

HDMI

-A

OCK

HDMI OU

EMORY

TUNER

TUNIN

ID1 (Default) Receives the remote control signals set in

ID1.

ID2 Receives the remote control signals set in

ID2.

ID1 is set for both remote control and receiver by

default. To avoid crossing remote control, change the

remote control ID for both remote control and

receiver.

REMOTEID-ID1

■ To change the remote control ID

Press oCODE SET using a pointed

object such as the tip of a ballpoint pen.

Press pSOURCE/RECEIVER.

Enter the desired remote control ID code.

To switch to ID1:

Enter “5019” using

mNumeric keys.

To switch to ID2:

Enter “5020” using

mNumeric keys.

Once the remote control code is registered successfully

pSOURCE/RECEIVER will blink twice.

Perform each of the following steps within

1 minute. Settings will be automatically stopped if

more than 1 minute passes since the last operation.

To reset, repeat from step 1.

SOURCE

RECEIVER

MAI

ODE SE

HDM

Registration successful: blinks twice

Registration failed: blinks 6 times

• If setup fails, repeat from step 1.

• Returns to ID1 after the remote control code is

initialized (☞

p. 95).

YES (Default) Video output signals of a resolution not

supported by the TV will not be

transmitted.

SKIP This unit ignores the TV’s support

capability and transmits input video

signals to the TV.

TVFORMAT-NTSC

MON.CHK-YES

SETUP

Extended functionality that can be configured as needed (Advanced Setup menu)

En 98

Changing FM/AM frequency steps

(Asia and General models only)

You can select one of the following FM/AM frequency steps: J1

Initializing various settings for this unit

Initializes various settings stored in this unit and sets it back to

default.

Select the items to be initialized from the following.

When an option other than CANCEL is selected, the applicable

default settings will be restored when the unit switches to standby

mode.

AM10/FM100 You can adjust the AM frequency by steps of 10kHz

and FM by steps of 100kHz.

AM9/FM50

(Default)

You can adjust the AM frequency by steps of 9kHz

and FM by steps of 50kHz.

TU-AM9/FM50

DSP PARAM Initializes all parameters for the sound programs.

VIDEO Resets video conversion settings (resolution/aspect

ratio) in the Setup menu.

ALL Resets this unit to default factory settings.

CANCEL (Default) Does not initialize.

INIT- CANCEL

1 : For details on setting FM/AM frequency steps, refer to “FM/AM tuning”

(☞

p. 55).

SETUP

En 99

This unit supports the HDMI Control function, which allows you to

operate external components via HDMI. If devices that support

HDMI Control (e.g., Panasonic VIERA Link-compatible TVs,

DVD/Blu-ray Disc players, etc.) are connected J1, remote

controls for those devices can be used to perform the following

operations:

– Power synchronization (on/standby)

– Volume control, including Mute

– Changing the volume of the audio output signal device (either the

TV or this unit)

Connect the TV that supports the HDMI Control

function to this unit’s HDMI output jack.

Connect the DVD/BD player that supports the HDMI

Control function to this unit’s HDMI input jack.

Turn on the TV and this unit.

Refer to the TV’s instruction manual on how to operate external

components.

Set the TV and this unit’s HDMI Control function to

“On.”

Turn the TV off.

Other synchronized HDMI Control devices are turned off with the

TV. If they are not synchronized, turn them off manually.

Turn the TV on.

Confirm that this unit has turned on in conjunction with the TV. If

it is still off, turn it on manually.

Change the TV’s input setting to the input jack that

is connected to this unit (e.g., HDMI1).

If DVD/BD player that supports the HDMI Control

function are connected to this unit, turn them on.

Confirm that this unit is properly synchronized with

the TV through the following operations by using the

TV remote control.

• Power On/Off

• Volume Control

• Switching between audio output devices

Using the HDMI Control function

NOTE

The following is an example of how to connect this unit, a TV,

and a DVD/BD player. Follow the instructions in your TV and

DVD/BD player manuals, as well as the ones written below.

– Set the TV’s HDMI Control function to “On”

– Follow the AV amplifier connection instructions, and connect

this unit to the TV

HDMI

Control signal

(such as volume control)

Remote control of TV

This unit

HDMI connection

This unit Confirm that “HDMI Control” is set to “On” (☞p. 86)

and select the HDMI OUT jack connected to the TV

in “Control Select” (☞p. 86). J2

TV and DVD/BD

player

Check the instruction manuals for those devices.

This unit Confirm that the input source for the DVD/BD players

has been selected. If a different input source has been

selected, change it manually.

TV and DVD/BD

player

Confirm that the video signal from the player is being

properly received by the TV.

Operations 1-8 will not be required more than twice.

If this unit is not synchronized to the TV’s power operations,

check that the HDMI Control function is set to “On” for both

devices.

If they will not properly synchronize, unplugging and re-

plugging the devices and turning them on and off may solve the

problem.

1 : We recommend that you use TVs and DVD/BD players from the same

manufacturer whenever possible.

2 : The default setting for the HDMI Control function is “Off.”

SETUP

Using the HDMI Control function

En 100

■

Switching the input source on this

unit automatically when listening

to TV audio

When the HDMI Control (☞p. 99) is operating properly,

the input source of this unit is automatically changed to

match operations carried out on the TV.

When the TV is connected with HDMI OUT 1, the

default input jack is AV4. If the AV4 optical digital jack

is connected to the TV’s audio output jack, then you can

enjoy TV sound through this unit right away.

When the TV is connected with HDMI OUT 2, the

default input jack is AV1. If the AV1 optical digital jack

is connected to the TV’s audio output jack, then you can

enjoy TV sound through this unit right away.

To use other jacks to input audio signals from TV, carry

out the following procedure.

Connect this unit and the TV with an HDMI

cable.

Connect TV’s audio output to this unit.

The input jacks listed below are available to input TV’s

audio signals. Use the same jack type as used for the

TV.

Press jON SCREEN. J1

Press kCursor B / C repeatedly to select

“Setup” and press kENTER.

Press kCursor D / E repeatedly to select

“HDMI” and press kENTER.

jON SCREEN

kCursor B / C / D / E

kENTER

ENTER

ON SCREEN

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

OPTICAL

V 3

AV 5

AV 6

AUDIO 1

AUDIO 2

(

)

AXIAL

IDE

HDMI

(

DVD

)

OUT

URR

DMI

ARC

SELECTABLE

HON

ANTENNA

PTICA

AXIAL

NENT

IDE

NENT

IDE

NIT

OPTICAL

Audio output

(Optical)

TV output jack Input jack

Optical digital audio output AV1 or AV4 (Default)

Coaxial digital audio output AV2 or AV3

Analog stereo output AV5, AV6, AUDIO1, or AUDIO2

(

)

AUDIO 1

AUDIO 2

(

)

COAXIAL

OPTICAL

COAXIAL

OCK

MULTI CH INPUT

VIDE

HDMI 1

(

)

HDMI 2

HDMI

HDMI 4

HDMI 5

ENTER

OUT

UBWOOFE

OUT

NE2

R.BA

SUR

TRIGGER OUT

+12V

MAX.

ENTE

REMOTE

HDMI OU

ELE

TABL

ANTENNA

OMPONENT

VIDEO

NEN

IDE

VIDE

NIT

OUT

Available input jacks

Continues to the

1 : Refer to the “Setting various functions (Setup menu)” (☞p. 78)

for details on the Setup menu.

SETUP

Using the HDMI Control function

En 101

Make sure that “HDMI Control” is “On”

When “HDMI Control” is set to “Off,” press

kENTER and kCursor B / C to set to “On.”

Press kCursor C to select “Control Select”

and press kENTER.

Use kCursor B / C to select the HDMI OUT

jack connected to the TV.

Press kCursor C to select “TV Audio

Input” and press kENTER.

Use kCursor B / C to select the input

jack connected in step 2.

Press jON SCREEN when you have

finished changing the settings.

If the TV hereafter transmits audio output signals,

this unit will automatically switch to the input

source chosen in step 10.

■

Single HDMI cable input to TV

audio with Audio Return Channel

function

When using a TV that supports HDMI functions and

Audio Return Channel function, audio/video output

from this unit to the TV or audio output from the TV to

this unit can be transmitted through a single HDMI cable

(Audio Return Channel function). Audio signals

transmitted from the TV to this unit can be assigned to

any input source.

Connect this unit and the TV with an HDMI

cable.

Press jON SCREEN. J1

Press kCursor B / C repeatedly to select

“Setup” and press kENTER.

Press kCursor D / E repeatedly to select

“HDMI” and press kENTER.

jON SCREEN

kCursor B / C / D / E

kENTER

ENTER

ON SCREEN

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

HDMI OUT

ARC ARC

SELECTABLE

IDE

HDMI 1

(

)

HDMI

HDMI 3

HDMI 4

ENTE

HONO

ANTENNA

OMPONENT

VIDE

IDE

HDMI

TV audio

output

Video / Audio

output

Continues to the

1 : Refer to the “Setting various functions (Setup menu)” (☞p. 78)

for details on the Setup menu.

SETUP

Using the HDMI Control function

En 102

Make sure that “HDMI Control” is “On.”

When “HDMI Control” is set to “Off,” press

kENTER and kCursor B / C to set to “On.”

Press kCursor C to select “Control Select”

and press kENTER.

Use kCursor B / C to select the HDMI OUT

jack connected to the TV.

Press kCursor C to select “TV Audio

Input” and press kENTER.

Use kCursor B / C to select the input

source to which the HDMI audio signals will

be assigned, and press kRETURN.

Press kCursor C to select “ARC (Audio

Return Channel)” and press

kENTER. J1

Press kCursor C to select “On.”

The Audio Return Channel function will turn on.

Press jON SCREEN to close the Setup

menu.

If the TV hereafter transmits audio output signals,

this unit will automatically switch to the input

source chosen in step 9.

jON SCREEN

kCursor B / C

kENTER

kRETURN

RETURN

ENTER

ON SCREEN

SCENE

ENHANCE

UR. DE

STRAIGHTSLEEP

URE DIRECT

PART Y

OVI

USI

DVD

RADI

ENT

TOP

OP-U

PLAY

AIN

NE 2

EIVE

CODE SE

MUTE

PTION

DMI

UDI

AUX

DOCK

HDMI

MULTI

RESET

NER

TUNING

1 : While the Audio Return Channel function is on, the jack selected

for the input source cannot be used.

SETUP

En 103

This unit allows you to configure a multi-zone audio system. The Zone2 feature allows you to set this unit to reproduce separate input sources in the main zone and the second zone (Zone2). You can

control this unit from the second zone using the supplied remote control.

Connecting Zone2

You need the following additional equipment to use the multi-zone functions of this unit:

• An infrared signal receiver in the second zone.

• An infrared signal emitter in the main zone. This emitter transmits infrared signals from the remote control

to a CD player or a DVD player, etc. in the main zone via the infrared signal receiver in the second zone.

• An amplifier and speakers in the second zone.

■

Using the external amplifier

An amplifier located in the secondary zone can be connected to this unit as shown below.

■

Using the internal amplifier of this unit

Connect the speakers in the second zone to the EXTRA SP jacks directly (☞p. 18).

■

Using REMOTE IN/OUT jacks for multi-zone components

This unit is equipped with REMOTE IN and REMOTE OUT jacks. You can use these jacks to control

this unit and other components from Zone2 (☞

p. 29).

Using multi-zone configuration

Only analog signal can be sent to Zone2. If you want to output sound from Zone2, connect an

external component to AV5-6, AUDIO1-2, or VIDEO AUX by analog connection. For example, if

you want to output sound from an HDMI DVD player in Zone2, you must connect the component to

this unit by both HDMI and analog connections.

Since there are many possible ways to connect and use this unit in a multi-zone configuration, we

recommend that you consult with your nearest authorized Yamaha dealer or service center about the

Zone2 connections that best meet your requirements.

To the REMOTE IN jack

Infrared signal

emitter

DVD player (etc.)

Amplifier

Remote control

Second zone

(Zone2)

This unit

From the ZONE2 OUT jacks

Infrared signal

receiver

From the REMOTE OUT jack

Main zone

To avoid unexpected noise, DO NOT USE the Zone2 feature with CDs encoded in DTS.

Some Yamaha models can be directly connected to the REMOTE jacks of this unit. These models

may not require an infrared signal emitter. Up to 6 Yamaha components can be connected as shown

below.

ZONE2

OUT

HDMI

HDMI 4

HDMI

ENTE

URROUND BACK

AMP

WOO

FER

AUDI

R.BA

PRE

EXTRA

CENTERSINGLE

LTA

ELE

PEAKER

SPEAKERS

NE2

PRE

AUDIO

Amplifier

Second Zone

(Zone2)

Audio input

REMOTE

Infrared signal

receiver

This unit Yamaha

component

REMOTE

OUT IN

REMOTE

OUT

SETUP

Using multi-zone configuration

En 104

Controlling Zone2

The remote control can be used to select and control

Zone2 devices. The available operations are as follows:

• Selecting the input source of Zone2.

• Tuning into FM or AM when “TUNER” is selected as the

input source of Zone2.

• Adjust the volume of Zone2 devices (when connected via

the built-in amplifier).

■

Activating the Zone2 operation

mode

Set bMAIN/ZONE2 to ZONE2 before attempting to

use the remote control to control Zone2 devices.

■

Operating Zone2

To enable and disable the audio output to Zone2

Press qRECEIVER A.

To select an input source for Zone2

Press dInput selector.

To enable the sleep timer for Zone2

Automatically switch the Zone2 device to standby mode

after a specified period of time has elapsed (sleep timer).

Press gSLEEP repeatedly to specify a time for the

sleep timer function.

Using the party mode

Use this feature to play main zone sources in Zone2

simultaneously. This feature is useful when you want to

play back main sources as background music in a home

party, etc. When using the party mode, set “Party Mode

Set” to “Enable” (☞

p. 88).

Press hPARTY to turn on or off the party mode.

“PARTY MODE ON” or “PARTY MODE OFF” appears

on the front panel display or the TV screen.

While this unit is in the party mode, the ZONE2

indicators turn on in the front panel display.

MAIN/ZONE2

dInput selector

gSLEEP

hPARTY

qRECEIVER A

SLEEP

AUDIO

V-AUX

PART Y

MAIN

ZONE 2

DOCK

TUNER

SCENE

RETURN

ENHANCE

UR. DE

STRAIGHT

URE DIRECT

OVI

USI

DVD

RADI

ENTER

ENT

TOP

OP-U

PLAY

EIVE

CODE SE

MUTE

PTION

REE

RESET

DMI

HDMI

OUT

MULTI

TUNING

Sleep 120min. Sleep 90min.

Sleep 60min.Sleep 30min.Sleep Off

Input audio signals are mixed down to 2ch Stereo and

output at the analog ZONE2 OUT jacks.

En 105

APPENDIX

Refer to the table below when this unit does not function properly.

If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service

center.

General

Troubleshooting

Problem Cause Remedy

See

page

The power will not

turn on.

The protection circuitry operated

3 times consecutively.

As a safety precaution, when the protection

circuitry operates 3 times consecutively, the

capability to turn on the power is disabled.

Contact your nearest Yamaha dealer or

service center to request repair.

—

The unit enters

standby mode soon

after the power is

turned on.

The power cable is not completely

inserted.

Connect the power cable properly to an AC

wall outlet.

—

(When this unit is turned back on

and “CHECK SP WIRES!” is

displayed.) The protection

circuitry has been activated

because this unit was turned on

while a speaker cable was shorted.

Make sure that all speaker cables between

this unit and speakers are connected

properly.

This unit cannot be

turned off or does

not work properly.

The internal microcomputer is

hung-up due to an external electric

shock (such as lightning or

excessive static electricity) or by a

drop in power supply voltage.

Disconnect the power cable from the AC

wall outlet, wait about 30 seconds and then

plug it in again.

—

The batteries in the remote control

may have lost their charge.

Replace all batteries. 7

The unit enters

standby mode.

The protection circuitry has been

activated because of a short circuit,

etc.

Check that the speaker with an impedance

of at least 6 Ω.

—

Check that the speaker impedance settings

are correct.

Check that the speaker wires are not

touching each other, then turn the unit back

on.

—

The sleep timer has turned off the

unit.

Turn on the unit, and play the source again. —

After display of a

countdown on the

front panel, the unit

goes into standby

mode.

If you do not use take any action,

the Auto Power Down function

operates.

Turn on the unit, and play the source again. —

In the Setup menu “Auto Power Down”

(“Function” → “Auto Power Down”),

increase the time until switching to standby

mode, or turn off the Auto Power Down

function.

No sound. Incorrect input or output cable

connections.

Connect the cables properly. If the problem

persists, the cables may be defective.

Speaker connections are not

secure.

Secure the connections. 19

The HDMI components connected

to the unit do not support the

HDCP copy protection standards.

Connect HDMI components that support the

HDCP copy protection standards.

—

The audio input into the device is

set to playback through the TV.

In the Setup menu, set the “Amp” of “Audio

Output” (“HDMI” → “Audio Output” →

“Amp”) to “On.”

No appropriate input source has

been selected.

Select an appropriate input source with

Input selector.

The volume is turned down or

muted.

Turn up the volume. —

Signals that this unit cannot

reproduce are being input from a

source component, such as a CD-

ROM.

Use an input source that has signals that can

be reproduced on this unit.

—

Problem Cause Remedy

See

page

En 106

APPENDIX

Troubleshooting

No picture. The video signal output from this

unit is not supported by a monitor

connected to this unit via the

HDMI OUT 1-2 jacks.

Displays the Advanced Setup menu and

select “VIDEO” in “INIT” to reset the video

parameters.

Displays the Advanced Setup menu and set

“MON.CHK” to “YES.”

An appropriate video input is not

selected on the TV.

Select an appropriate video input on the TV. —

No sound is output

from a specific

speaker.

The speaker is malfunctioning.

Check the Speaker indicators on

the front panel display. If the

corresponding indicator lights up,

connect another speaker and check

if sound is output.

If sound is not output, the unit may be

malfunctioning.

The playback component or

speakers are not connected

properly.

Connect the cables properly. If the problem

persists, the cables may be defective.

19, 24

Output from that speaker is

disabled.

Check the Speaker indicators on the front

panel display. If the corresponding indicator

is turned off, try the following.

1) Change to a different input source.

2) With the selected sound program, sound

is not output from that speaker. Select

another sound program.

3) “None” may have been selected for that

speaker on this unit. Display “Speaker” in

the Setup menu, and set respective

parameters to enable output from that

speaker (“Speaker” → “Manual Setup” →

“Configuration”).

10, 79

The volume of that speaker is set

to the minimum in “Speaker” in

the Setup menu.

Display “Speaker” in the Setup menu and

adjust the volume (“Speaker” → “Manual

Setup” → “Level”).

(If hardly any sound comes from

one channel)

Speaker output balance is not set

correctly.

Balance the volume of each speaker from

“Level” in the Setup menu (“Speaker” →

“Manual Setup” → “Level”).

Sound may not be output from

certain channels, depending on the

input source or sound program.

Try another sound program. 42

Problem Cause Remedy

See

page

Only the center

speaker outputs

substantial sound.

When a monaural source sound

program is applied, for some

surround decoders, sound from all

channels is output from the center

speaker.

Try another sound program. 42

No sound is heard

from the presence

speakers.

This unit is in straight decoding

mode and a monaural source is

being played back.

Press STRAIGHT to exit straight decoding

mode.

Sound may not be output from

certain channels depending on

input sources or sound programs.

Try another sound program. 42

No sound is heard

from the surround

speakers.

This unit is in straight decoding

mode and a monaural source is

being played back.

Press STRAIGHT to exit straight decoding

mode.

Sound may not be output from

certain channels depending on

input sources or sound programs.

Try another sound program. 42

No sound is heard

from the surround

back speakers.

“Extended Surround” in the

OPTION menu is set to “OFF,” or

an input signal does not contain a

surround back flag with “Extended

Surround” set to “Auto.”

Set “Extended Surround” other than “OFF”

or “Auto.”

No sound is heard

from the subwoofer.

A subwoofer is not connected, or it

is inactive.

Check that a subwoofer is connected

correctly, and from the Setup menu

“Subwoofer” (“Speaker” → “Manual

Setup” → “Configuration” →

“Subwoofer”), set the subwoofer to “Use.”

19, 81

The subwoofer is turned off. Turn the subwoofer power on.

If the subwoofer includes an Auto Power

Off function, then lower the Auto Power Off

sensitivity settings.

—

The source does not contain LFE

(☞p. 112) or low frequency

signals.

—

The right

combination of audio

/ video jacks to

connect cannot be

found.

Combine input connected to the

external component video output

with another input audio jack.

Display the Input menu for the connected

video output, select “Audio In” and select

the jack to use for audio input.

Problem Cause Remedy

See

page

En 107

APPENDIX

Troubleshooting

HDMI™

The audio input

sources cannot be

played in the desired

digital audio signal

format.

The connected component is not

set to output the desired digital

audio signals.

Set the playback component properly

referring to its instruction manual.

—

There is noise

interference from

digital or radio

frequency

equipment.

This unit is too close to other

digital or radio frequency

equipment.

Move this unit further away from such

equipment.

—

Noise/hum noise is

heard.

Incorrect cable connection.

Connect the audio cables properly.

If the problem persists, the cables may be

defective.

—

A DTS-CD is being played back. 1) When only noise is output

If a DTS bitstream signal is not properly

input to this unit, only noise is output.

Connect the playback component to this

unit by digital connection and playback the

DTS-CD. If the condition is not improved,

the problem may results from the playback

component. Consult the manufacturer of the

playback component.

2) When noise is output during playback or

skip operation

Before playing back the DTS-CD, display

the Input menu after selecting the input

source and set “Decoder Mode” to “DTS.”

—

The volume cannot

be increased, or the

sound is distorted.

The component connected to the

output jacks of this unit is not

turned on.

When the component connected to the

output jacks of this unit is not turned on, the

sound may be distorted, or the volume may

decreased due to the nature of AV receivers.

Turn on all components connected to this

unit.

—

“Max Volume” is set to a low

value.

Set it to a higher value. 83

Problem Cause Remedy

See

page

Problem Cause Remedy

See

page

The front panel

display HDMI

indicator is flashing.

An error with the HDMI

connection has occurred.

Try re-inserting the HDMI cable. —

Confirm that HDMI video that is not

supported by the unit is not being input

(Information menu → “Video

information”).

No picture or sound. The number of components is over

the limit.

Disconnect some of the HDMI components. —

The connected HDMI component

does not support high-bandwidth

digital copyright protection

(HDCP).

Connect an HDMI component that supports

HDCP.

—

(When using HDMI

Control function)

TV sound is not

output from this unit

when operating the

remote control of the

TV.

The TV audio output is not

connected to this unit, or the

setting to match operations carried

out on TV is not set.

Connect the TV audio output to this unit,

and then select the connected input source

in “TV Audio Input” (Setup menu → HDMI

→ TV Audio Input).

(When using Audio Return

Channel function)

The Audio Return Channel

function is not working.

Make sure that your TV supports Audio

Return Channel.

Set the Audio Return Channel function to

on (Setup menu → HDMI → ARC (Audio

Return Channel)).

En 108

APPENDIX

Troubleshooting

Tuner (FM/AM)

Problem Cause Remedy

See

page

FM stereo reception

is noisy.

You are too far from the station

transmitter, or the input from the

antenna is weak.

Check the antenna connections. 31

Switch to monaural mode. 57

Replace the outdoor antenna with a more

sensitive multi-element antenna.

—

There is distortion,

and clear reception

cannot be obtained

even with a good FM

antenna.

There is multi-path interference. Adjust the antenna height or orientation, or

place it in a different location.

—

The desired station

cannot be tuned into

with the automatic

tuning method.

You are in an area far from a

station, or input from the antenna

is weak.

Replace the outdoor antenna with a more

sensitive multi element antenna.

—

Use TUNING H / I to manually select the

station.

“No Presets” is

displayed.

No preset stations are registered. Register stations you want to listen to as

preset stations before operation.

“Wrong Station” is

displayed.

An invalid FM/AM frequency has

been input.

Input a frequency that can be received. —

Problem Cause Remedy

See

page

The desired station

cannot be tuned into

with the automatic

tuning method.

The signal is weak, or the antenna

connections are loose.

Adjust the AM loop antenna orientation. 31

Use the manual tuning method. 55

Automatic station

preset does not

work.

Automatic station preset is not

available for AM stations.

Use manual station preset. 55

Continuous

crackling and

hissing noises are

heard.

The supplied AM loop antenna is

not connected.

Connect the AM loop antenna correctly

even if you use an outdoor antenna.

The noises may be caused by

lightning, fluorescent lamps,

motors, thermostats, or other

electrical equipment.

It is difficult to completely eliminate noise,

but it can be reduced by installing and

properly grounding an outdoor AM antenna.

Buzzing and whining

noises are heard.

A TV set is being used nearby. Move this unit away from the TV set. —

En 109

APPENDIX

Troubleshooting

iPod™/iPhone™ Bluetooth™

Display Cause Remedy

See

page

Loading... The unit is in the process of

recognizing the connection with

your iPod/iPhone.

—

The unit is in the middle of

acquiring song lists from your

iPod/iPhone.

—

Connect error There is a problem with the signal

path from your iPod/iPhone to the

unit.

Turn off the unit and reconnect the

Universal Dock for iPod/iPhone to the

DOCK jack of the unit.

Remove your iPod/iPhone from the

Universal Dock for iPod/iPhone and then

place it back in the dock.

Unknown iPod The iPod/iPhone being used is not

supported by the unit.

Connect an iPod/iPhone supported by the

unit.

—

iPod connected Your iPod/iPhone is properly

placed in the Universal Dock for

iPod/iPhone.

—

Your iPod/iPhone is properly

placed in the Yamaha iPod

wireless transmitter and connected

with this unit via wireless

transmission.

Disconnected Your iPod/iPhone is removed from

the Universal Dock for iPod/

iPhone.

—

Your iPod/iPhone is disconnected

with this unit via wireless

transmission.

—

Unable to play The unit cannot playback the

songs currently stored on your

iPod/iPhone.

Check that songs are currently stored on

your iPod/iPhone.

—

Display Cause Remedy

See

page

Searching... The Yamaha Bluetooth wireless

audio receiver and the Bluetooth

component are in the process of

pairing.

—

The Yamaha Bluetooth wireless

audio receiver and the Bluetooth

component are in the process of

establishing a connection.

—

Completed The pairing is completed. —

Canceled The pairing is canceled. —

BT connected The connection between the

Yamaha Bluetooth wireless audio

receiver and the Bluetooth

component is established.

—

Disconnected The Bluetooth component is

disconnected from the Yamaha

Bluetooth wireless audio receiver.

—

Not found The Bluetooth component is not

found.

During pairing:

– pairing must be performed on the

Bluetooth component and this unit

simultaneously. Check if the Bluetooth

component is in pairing mode.

During connecting:

– check if the Bluetooth component is

turned on.

– check if the Bluetooth component is

within 10 m of the Yamaha Bluetooth

wireless audio receiver.

—

Pairing may not have been

achieved.

Try pairing again. 64

En 110

APPENDIX

Troubleshooting

Remote control

Problem Cause Remedy

See

page

The remote control

does not work or

function properly.

Wrong distance or angle. The remote control will function within a

maximum range of 6 m, and no more than

30 degrees off-axis from the front panel.

—

Direct sunlight or lighting (from

an inverter type of fluorescent

lamp, strobe light, etc.) is striking

the remote control sensor of this

unit.

Adjust the lighting angle, or reposition this

unit.

—

The batteries are weak. Replace all batteries. 7

The remote control ID of the

remote control and this unit do not

match.

Match the remote control ID of this unit and

the remote control.

External components

cannot be controlled

using the remote

control.

The remote control code is not

correctly set.

Set the remote control code correctly using

“Remote control code search” on the CD-

ROM.

—

Try setting another code for the same

manufacturer using “Remote control code

search” on the CD-ROM.

—

If this unit does not work when you press

Cursor B / C / D / E, do the following.

When the key does not work during DVD

disc menu operation: press the Input

selector again.

When there is no response with remote

control operation of the OPTION menu/

Setup menu: press SOURCE/RECEIVER

(it should glow orange) and try operating the

remote control again.

—

Even if the remote control code is

correctly set, there are some

models that do not respond to the

remote control.

—

APPENDIX

En 111

Audio information

Audio and video synchronization (Lipsync)

Lip sync, an abbreviation for lip synchronization, is a technical term that

involves both a problem, and the capability of maintaining audio and video

signals synchronized during post-production and transmission.

Whereas the audio and video latency requires complex end-user

adjustment, HDMI version 1.3 incorporates an automatic audio and video

syncing capability that allows devices to perform this synchronization

automatically and accurately without user interaction.

Bi-amplification connection (Bi-amp)

A bi-amplification connection uses two amplifiers for a speaker. One

amplifier is connected to the woofer section of a loudspeaker while the

other is connected to the combined mid and tweeter section. With this

arrangement each amplifier operates over a restricted frequency range. This

restricted range presents each amplifier with a much simpler job and each

amplifier is less likely to influence the sound in some way.

Dolby Digital

Dolby Digital is a digital surround sound system that gives you completely

independent multi-channel audio. With 3 front channels (front L/R and

center), and 2 surround stereo channels, Dolby Digital provides 5 full-range

audio channels. With an additional channel especially for bass effects,

referred to as LFE (Low-Frequency Effect), the system has a total of 5.1-

channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the

surround speakers, more accurate moving sound effects and surround sound

environments are possible than with Dolby Surround. The wide dynamic

range from maximum to minimum volumes that are reproduced by the 5

full-range channels, and the precise sound orientation generated using

digital sound processing provides listeners with unprecedented excitement

and realism. With this unit, any sound environment from monaural up to a

5.1-channel configuration can be freely selected for your enjoyment.

Dolby Pro Logic II

Dolby Pro Logic II is an improved technique used to decode vast numbers

of existing Dolby Surround sources. This new technology enables a discrete

5-channel playback with 2 front left and right channels, 1 center channel,

and 2 surround left and right channels, instead of only 1 surround channel

for conventional Pro Logic technology. There are three modes available:

“Music mode” for music sources, “Movie mode” for movie sources, and

“Game mode” for game sources.

Dolby Pro Logic IIx

Dolby Pro Logic IIx is a new technology enabling discrete multichannel

playback from 2-channel or multi-channel sources. There are three modes

available: “Music mode” for music sources, “Movie mode” for movie

sources (for 2-channel sources only) and “Game mode” for game sources.

Dolby Surround

Dolby Surround uses a 4-channel analog recording system to reproduce

realistic and dynamic sound effects: 2 front left and right channels (stereo),

a center channel for dialog (monaural), and a surround channel for special

sound effects (monaural). The surround channel reproduces sound within a

narrow frequency range. Dolby Surround is widely used with nearly all

video tapes and laser discs, as well as in many TV and cable broadcasts.

The Dolby Pro Logic decoder built into this unit employs a digital signal

processing system that automatically stabilizes the volume on each channel

to enhance moving sound effects and directionality.

Dolby TrueHD

Dolby TrueHD is an advanced lossless audio technology developed for

high-definition disc-based media including Blu-ray Disc. Selected as an

optional audio standard for Blu-ray Disc, this technology delivers sound

that is bit-for-bit identical to the studio master, offering a high-definition

home theater experience. Supporting bitrates up to 18.0 Mbps, Dolby

TrueHD can carry up to 8 discrete channels of 24-bit/96 kHz audio

simultaneously. Dolby TrueHD also remains fully compatible with the

existing multichannel audio systems and retains the metadata capability of

Dolby Digital, allowing dialog normalization and dynamic range control.

DTS 96/24

DTS 96/24 offers an unprecedented level of audio quality for multichannel

sound on DVD video, and is fully backward-compatible with all DTS

decoders. “96” refers to a 96 kHz sampling rate compared to the typical

48 kHz sampling rate. “24” refers to 24-bit word length. DTS 96/24 offers

sound quality transparent to the original 96/24 master, and 96/24 5.1-

channel sound with full-quality full-motion video for music programs and

motion picture soundtracks on DVD video.

DTS Digital Surround

DTS Digital Surround was developed to replace the analog soundtracks of

movies with a 5.1-channel digital sound track, and is now rapidly gaining

popularity in movie theaters around the world. DTS, Inc. has developed a

home theater system so that you can enjoy the depth of sound and natural

spatial representation of DTS Digital Surround in your home. This system

produces practically distortion-free 5.1-channel sound (technically, left,

right and center channels, 2 surround channels, plus an LFE 0.1 channel as

a subwoofer, for a total of 5.1-channels). This unit incorporates a DTS-ES

decoder that enables 6.1-channel reproduction by adding the surround back

channel to the existing 5.1-channel format.

DTS Express

This is an audio format for next-generation optical discs such as Blu-ray

discs. It uses optimized low bit rate signals for network streaming. In the

case of a Blu-ray disc, this format is used with secondary audio, enabling

you to enjoy the commentary of the movie producer via the Internet while

playing the main program.

DTS-HD High Resolution Audio

DTS-HD High Resolution Audio is a high resolution audio technology

developed for high-definition disc-based media including Blu-ray Disc.

Selected as an optional audio standard for Blu-ray Disc, this technology

delivers sound that is virtually indistinguishable from the original, offering

a high-definition home theater experience.

Supporting bitrates up to 6.0 Mbps for Blu-ray Disc, DTS-HD High

Resolution Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz

audio simultaneously.

DTS-HD High Resolution Audio also remains fully compatible with the

existing multichannel audio systems that incorporate DTS Digital

Surround.

DTS-HD Master Audio

DTS-HD Master Audio is an advanced lossless audio technology developed

for high-definition disc-based media including Blu-ray Disc. Selected as an

optional audio standard for Blu-ray Disc, this technology delivers sound

that is bit-for-bit identical to the studio master, offering a high-definition

home theater experience.

Supporting bitrates up to 24.5 Mbps for Blu-ray Disc, DTS-HD Master

Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz audio

simultaneously. Supported by HDMI version 1.3 and designed for the

optical disc players and AV receivers/amplifiers of the future, DTS-HD

Master Audio also remains fully compatible with the existing multichannel

audio systems that incorporate DTS Digital Surround.

Glossary

APPENDIX

Glossary

En 112

DSD

Direct Stream Digital (DSD) technology stores audio signals on digital

storage media, such as Super Audio CDs. Using DSD, signals are stored as

single bit values at a high-frequency sampling rate of 2.8224 MHz, while

noise shaping and oversampling are used to reduce distortion, a common

occurrence with very high quantization of audio signals. Due to the high

sampling rate, better audio quality can be achieved than that offered by the

PCM format used for normal audio CDs. The frequency is equal to or

higher than 100 kHz, with a dynamic range of 120 dB. This unit can

transmit or receive DSD signals via the HDMI jack.

LFE 0.1 channel

This channel reproduces low-frequency bass signals, and has a frequency

range from 20 Hz to 120 Hz. This channel is counted as 0.1, because it only

enforces a low-frequency range compared to the full-range reproduced by

the other 5-channels in Dolby Digital or DTS 5.1-channel systems.

Neo:6

Neo:6 decodes the conventional 2-channel sources for 6-channel playback

by the specific decoder. It enables playback with the full-range channels

with higher separation just like digital discrete signal playback. There are

two modes available: “Music mode” for music sources and “Cinema mode”

for movie sources.

PCM (Linear PCM)

Linear PCM is a signal format under which an analog audio signal is

digitized, recorded and transmitted without using any compression. This is

used as a method of recording CDs and DVD audio. The PCM system uses

a technique for sampling the size of the analog signal per very small unit of

time. Standing for “Pulse Code Modulation,” the analog signal is encoded

as pulses and then modulated for recording.

Sampling frequency and number of quantized bits

When digitizing an analog audio signal, the number of times the signal is

sampled per second is called the sampling frequency, while the degree of

accuracy when converting the sound level into a numeric value is called the

number of quantized bits. The range of rates that can be played back is

determined based on the sampling rate, whereas the dynamic range

representing the sound level difference is determined by the number of

quantized bits. In principle, the higher the sampling frequency, the wider

the range of frequencies that can be played back, and the higher the number

of quantized bits, the more accurately the sound level can be reproduced.

Sound program information

CINEMA DSP

Since the Dolby Surround and DTS systems were originally designed for

use in movie theaters, their effect is best felt in a theater having many

speakers designed for acoustic effects. Since home conditions, such as

room size, wall material, number of speakers, and so on, can differ so

widely, it is inevitable that there are differences in the sound that is heard.

Based on a wealth of actually measured data, Yamaha CINEMA DSP uses

Yamaha’s original DSP technology to combine Dolby Pro Logic, Dolby

Digital, and DTS systems to provide the audiovisual experience of a movie

theater in the listening room of your own home.

Compressed Music Enhancer

The Compressed Music Enhancer feature of this unit enhances your

listening experience by regenerating the missing harmonics in compression

artifacts. As a result, it compensates for flattened complexity due to the loss

of high-frequency fidelity as well as lack of bass due to the loss of low-

frequency bass, providing improved performance for the overall sound

system.

SILENT CINEMA

Yamaha has developed a natural, realistic sound effect DSP algorithm for

headphones. Parameters for headphones have been set for each sound

program, so that accurate representations of all the sound programs can be

enjoyed on headphones.

Virtual CINEMA DSP

Yamaha has developed a Virtual CINEMA DSP algorithm that allows you

to enjoy DSP surround effects even without any surround speakers, by

using virtual surround speakers. It is even possible to enjoy Virtual

CINEMA DSP using a minimal two-speaker system that does not include a

center speaker.

CINEMA DSP 3D

The actually measured sound field data contain the information of the

height of the sound images. CINEMA DSP 3D feature achieves the

reproduction of the accurate height of the sound images so that it creates

the accurate and intensive stereoscopic sound fields in a listening room.

Video information

Component video signal

With the component video signal system, the video signal is separated into

the Y signal for luminance and the P

B and PR signals for chrominance.

Color can be reproduced more faithfully with this system because each of

these signals is independent. The component signal is also called the “color

difference signal” because the luminance signal is subtracted from the color

signal. A monitor with component input jacks is required in order to output

component signals.

Composite video signal

With the composite video signal system, the video signal comprises the

three basic elements of a video picture: color, brightness and

synchronization data. A composite video jack on a video component

transmits these three elements combined.

Deep Color

Deep Color refers to the use of various color depths in displays, up from the

24-bit depths in previous versions of the HDMI specification. This extra bit

depth allows HDTVs and other displays increase from millions of colors to

billions of colors and eliminate on-screen color banding for smooth tonal

transitions and subtle gradations between colors. The increased contrast

ratio can represent many times more shades of gray between black and

white. Additionally, Deep Color increases the number of available colors

within the boundaries defined by the RGB or YCbCr color space.

HDMI

HDMI (High-Definition Multimedia Interface) is the first industry

supported, uncompressed, all-digital audio/video interface. Providing an

interface between any sources (such as set-top boxes or AV receivers) and

audio/video monitors (such as digital televisions), HDMI supports

standard, enhanced or high-definition video as well as multichannel digital

audio using a single cable. HDMI transmits all ATSC HDTV standards and

supports 8-channel digital audio, with bandwidth to spare to accommodate

future enhancements and requirements.

When used in combination with HDCP (High-bandwidth Digital Content

Protection), HDMI provides a secure audio/video interface that meets the

security requirements of content providers and system operators. For

further information on HDMI, visit the HDMI website at “http://

www.hdmi.org/.”

APPENDIX

Glossary

En 113

“x.v.Color”

A color space standard supported by HDMI version 1.3. It is a more

extensive color space than sRGB, and allows the expression of colors that

were not hitherto possible. While remaining compatible with the color

gamut of sRGB standards, “x.v.Color” expands the color space, and can

thus produce more vivid, natural images. It is particularly effective for still

pictures and computer graphics.

Video conversion

Analog-to-HDMI video conversion is performed according to resolution of video signals as shown below. Analog-to-analog video conversion is also possible when “Analog to Analog Conversion” is

set to “On” (☞

p. 84).

✓: available conversion

HDMI output COMPONENT VIDEO output VIDEO output

Resolution 480i/576i 480p/576p 720p 1080i 1080p 480i/576i 480p/576p 720p 1080i 1080p 480i/576i

HDMI input

480i/576i ✓✓✓✓✓

480p/576p ✓✓✓✓

720p ✓

1080i ✓

1080p ✓

COMPONENT

VIDEO input

480i/576i ✓✓✓✓✓✓ ✓

480p/576p ✓✓✓✓ ✓

720p ✓ ✓

1080i ✓ ✓

VIDEO input 480i/576i ✓✓✓✓✓✓ ✓

APPENDIX

En 114

■ HDMI signal compatibility

Audio signals

• If the input source component can decode the bitstream audio signals of audio commentaries, you can playback the audio

sources with the audio commentaries mixed down by using the digital audio input (optical or coaxial) connections.

• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.

Video signals

This unit is compatible with the video signals of the following resolutions:

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are

trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent No’s:

5,451,942;5,956,674;5,974,380;5,978,762;6,226,616;6,487,535 & other U.S. and worldwide patents

issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD

iPod™, iPhone™

“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries. “iPhone” is a trademark

of Apple Inc.

Bluetooth™

Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a

license agreement.

“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered

trademarks of HDMI Licensing LLC.

“SILENT CINEMA” is a trademark of Yamaha Corporation.

Information on HDMI™

Audio signal types Audio signal formats Compatible media

2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc.

Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD,

etc.

DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc.

Bitstream Dolby Digital, DTS DVD-Video, etc.

Bitstream (High definition audio) Dolby TrueHD, Dolby Digital Plus,

DTS-HD Master Audio, DTS-HD

High Resolution Audio, DTS Express

Blu-ray Disc, HD DVD, etc.

NOTES

• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output,

depending on the type of the DVD player.

• This unit is not compatible with HDCP-incompatible HDMI or DVI components.

• Refer to the supplied instruction manuals for details.

To decode audio bitstream signals on this unit, set the input source component appropriately so that the

component outputs the bitstream audio signals directly (does not decode the bitstream signals on the

component).

• This unit is not compatible with the audio commentary features (for example, the special audio contents

downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not playback the audio

commentaries of the Blu-ray Disc or HD DVD content.

– 480i/60 Hz

– 576i/50 Hz

– 480p/60 Hz

– 576p/50 Hz

– 720p/60 Hz, 50 Hz

– 1080i/60 Hz, 50 Hz

– 1080p/60 Hz, 50 Hz, 24 Hz

About trademarks

APPENDIX

En 115

■ Input jacks

• Analog audio

Audio x 6 (PHONO, AV5, AV6, AUDIO1, AUDIO2, V-AUX)

MULTI CH INPUT x 1 (8ch Input)

• Digital audio

Optical x 2 (AV1, AV4)

Coaxial x 2 (AV2, AV3)

•Video

Composite x 5 (AV3, AV4, AV5, AV6, V-AUX)

S-Video x 1 (AV5) [U.K. and Europe models]

Component x 2 (AV1, AV2)

• HDMI input

HDMI (Front Panel) x 1 (V-AUX)

HDMI (Rear Panel) x 5 (HDMI 1-5)

•Other

DOCK x 1 (AUDIO, VIDEO [Composite])

■ Output jacks

• Analog Audio

Speaker out x 9 (7 ch) (FRONT L/R, CENTER, SURROUND L/R,

SURROUND BACK L/R

, EXTRA SP L/R

)

*1 Note: assignment is possible. [SURROUND BACK, BI-AMP (FRONT L/R)]

*2 Note: assignment is possible. [ZONE2, PRESENCE]

Pre Out x 7 [FRONT L/R, CENTER, SURROUND L/R,

SURROUND BACK L/R]

Subwoofer out x 2 (MONO, SUBWOOFER)

AV O U T x 1

AUDIO OUT x 1

ZONE2 OUT x 1

•Video

MONITOR OUT

- Component x 1

- Composite x 1

AV O U T

- Composite x 1

• HDMI Output

HDMI OUT x 2 (HDMI OUT 1-2)

■ Remote jacks

•REMOTE IN x 1

• REMOTE OUT x 1

• TRIGGER OUT x 1

■ HDMI

• HDMI Specification: Deep Color, “x.v.Color,” Auto Lips Sync,

ARC (Audio Return Channel), 3D

• Video Format (Repeater Mode)

- VGA

- 480i/60 Hz

- 576i/50 Hz

- 480p/60 Hz

- 576p/50 Hz

- 720p/60 Hz, 50 Hz

- 1080i/60 Hz, 50 Hz

- 1080p/60 Hz, 50 Hz, 24 Hz

• Analog up Conversion

- 480i/60 Hz (NTSC)

- 576i/50 Hz (PAL)

- 480p/60 Hz

- 576p/50 Hz

- 720p/60 Hz, 50 Hz

- 1080i/60 Hz, 50 Hz

• Up-Scaling

- 480i → 480p/720p/1080i/1080p

- 480p → 720p/1080i/1080p

- 576i → 576p/720p/1080i/1080p

- 576p → 720p/1080i/1080p

•Audio Format

- Dolby Digital

- DTS

- DSD 6ch

- Dolby Digital Plus

- Dolby TrueHD

- DTS-HD

- PCM 2ch-8ch (Max 192 kHz/24 bit)

• Content Protection: HDCP compatible

■ TUNER

• Analog Tuner

[U.K. and Europe models]

FM/AM with RDS x 1 (TUNER)

[Other models]

FM/AM x 1 (TUNER)

■ Compatible Decoding Formats

• Decoding Format

- Dolby TrueHD, Dolby Digital Plus

- DTS-HD Master Audio, DTS-HD High Resolution, DTS Express

- Dolby Digital, Dolby Digital EX

- DTS, DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1

• Post Decoding Format

- Dolby Pro Logic

- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,

Dolby Pro Logic II Game

- Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Movie,

Dolby Pro Logic IIx Game

- DTS Neo:6 Music, DTS Neo:6 Cinema

■ AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround

(20-20 kHz, 0.08% THD, 8 Ω)

FRONT L/R ................................................................... 95 W+95 W

CENTER................................................................................... 95 W

SURROUND L/R ..........................................................95 W+95 W

SURROUND BACK L/R .............................................. 95 W+95 W

• Dynamic Power (IHF)

Front Speakers 8/6/4/2 Ω ...................................130/165/195/240 W

• Input Sensitivity/Input Impedance

PHONO.......................................................................3.5 mV/47 kΩ

AV5, etc. ....................................................................200 mV/47 kΩ

MULTI CH IN ...........................................................200 mV/47 kΩ

• Maximum Input Voltage

PHONO (1 kHz 0.1% THD)..................................... 60 mV or more

AV5, etc. (1 kHz 0.5% THD)...................................... 2.3 V or more

• Rated Output Voltage/Output Impedance

AUDIO OUT ............................................................200 mV/1.2 kΩ

PRE OUT......................................................................1.0 V/1.2 kΩ

SUBWOOFER (2ch Stereo & Front: Small)................1.0 V/1.2 kΩ

ZONE2 OUT ............................................................200 mV/1.2 kΩ

Specifications

APPENDIX

Specifications

En 116

• Headphone Jack Rated Output/Impedance

AV5, etc. (1 kHz, 50 mV, 8 Ω) ..................................100 mV/560 Ω

• Frequency Response

AV5 to FRONT ..................................... 10 Hz to 100 kHz, +0/-3 dB

• Total Harmonic Distortion

PHONO (20-20 kHz, 1V)............................................ 0.02% or less

AV5, etc. to FRONT (PURE DIRECT)

(20-20 kHz, 50 W, 8 Ω) ............................................ 0.06% or less

• Signal to Noise Ratio (IHF-A Network)

[Australia, China and General models]

PHONO Input Shorted (5 mV to Front Speakers)......86 dB or more

AV5, etc. (PURE DIRECT). Input Shorted

(250 mV to Front Speakers)...................................100 dB or more

[Other models]

PHONO Input Shorted (5 mV to Front Speakers)......81 dB or more

AV5, etc. (PURE DIRECT). Input Shorted

(250 mV to Front Speakers)...................................100 dB or more

• Residual Noise (IHF-A Network)

Front Speakers ............................................................150 µV or less

• Channel Separation (1 kHz/10 kHz)

PHONO Input shorted ..................................... 60 dB/55 dB or more

AV5, etc. (5.1 kΩ shorted)............................... 60 dB/45 dB or more

• Volume Control ...................................... MUTE / -80 dB to +16.5 dB

• Tone Control (Front Speakers)

Bass Boost/Cut ..............................................±6 dB/0.5 dB at 50 Hz

Bass Turnover Frequency ...................................................... 350 Hz

Treble Boost/Cut..........................................±6 dB/0.5 dB at 20 kHz

Treble Turnover Frequency .................................................. 3.5 kHz

• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)

H.P.F. (Front, Center, Surround, Surround Back)............. 12 dB/oct.

L.P.F. (Subwoofer) ............................................................ 24 dB/oct.

■ VIDEO SECTION

• Video Signal Type

[Korea and General models] ................................................... NTSC

[Other models] ........................................................................... PAL

• Video Conversion...............................................................NTSC/PAL

• Signal Level

Composite ..................................................................... 1 Vp-p/75 Ω

S-video

[U.K. and Europe models]....... 1 Vp-p/75 Ω (Y), 0.286 Vp-p/75 Ω (C)

Component ...................... 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (P

B/PR)

• Maximum Input Level (Video Conversion Off) .......1.5 Vp-p or more

• Signal to Noise Ratio .................................................... 50 dB or more

• Frequency Response [MONITOR OUT]

Component (Video Conversion Off) ............ 5 Hz to 60 MHz, -3 dB

■ FM SECTION

• Tuning Range

[Asia and General models]............87.5/87.50 to 108.0/108.00 MHz

[Other models] ................................................ 87.50 to 108.00 MHz

• 50 dB Quieting Sensitivity (IHF)

Mono ...................................................................... 3.0 µV (20.8 dB)

• Signal to Noise Ratio (IHF)

Mono/Stereo.................................................................. 74 dB/70 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo........................................................................0.3/0.3%

• Antenna Input (unbalanced)......................................................... 75 Ω

■ AM SECTION

• Tuning Range

[Asia and General models]..................... 530/531 to 1710/1611 kHz

[Other models] ........................................................531 to 1611 kHz

■ GENERAL

• Power Supply

[General model] ................... AC 110/120/220/230-240 V, 50/60 Hz

[China model] ........................................................ AC 220 V, 50 Hz

[Korea model] ........................................................ AC 220 V, 60 Hz

[Australia model] ................................................... AC 240 V, 50 Hz

[U.K., Europe models]........................................... AC 230 V, 50 Hz

[Asia model] .......................................AC 220/230-240 V, 50/60 Hz

• Power Consumption ..................................................................400 W

• Standby Power Consumption

HDMI Control off / Standby Through off ....................0.2 W or less

HDMI Control on/ Standby Through on

(Input: HDMI1, when no HDMI signal is input) ... 2.7 W (typical)

• Dimensions (W x H x D)

435 x 171 x 367.5 mm

• Weight

11.2 kg

* Specifications are subject to change without notice.

APPENDIX

En 117

Numerics

5 channel speaker layout.............................................................. 15

5.1-channel speaker layout........................................................... 15

7.1-channel speaker connection ................................................... 17

7.1-channel speaker layout........................................................... 14

Adaptive DRC, OPTION menu ................................................... 52

Advanced Setup menu ................................................................. 96

AM antenna connection ............................................................... 31

AM tuning .................................................................................... 55

Analog to Analog Conversion, Video Setup................................ 84

ARC (Audio Return Channel), HDMI Setup............................... 86

Aspect, Processing, Video Setup ................................................. 85

Audio In, Input menu................................................................... 68

Audio information, Information menu......................................... 92

AUDIO jack ................................................................................. 20

Audio Output, HDMI Setup......................................................... 87

Audio Return Channel function ................................................. 101

Auto Power Down, Function Setup ............................................. 89

Auto Preset................................................................................... 58

Auto Setup, Speaker Setup .......................................................... 79

BD player connection .................................................................. 24

Bi-amp connection, speaker......................................................... 18

Bluetooth™ component playback................................................ 64

Cable plug .................................................................................... 20

Center Image, Sound Program menu ........................................... 77

Center Level, Sound Program menu............................................ 76

Center speaker.............................................................................. 13

Center Width, Sound Program menu ........................................... 77

Changing speaker impedance ...................................................... 18

CINEMA DSP 3D mode.............................................................. 44

CINEMA DSP 3D Mode, OPTION menu................................... 52

CINEMA DSP indicator .............................................................. 10

Clear All Preset ........................................................................... 58

Clear Preset ................................................................................. 58

COAXIAL jack ........................................................................... 20

COMPONENT VIDEO jack....................................................... 20

Compressed Music Enhancer mode ............................................ 45

Configuration, Manual Setup, Speaker Setup ............................. 80

Connect, OPTION menu ............................................................. 53

Connecting speakers.................................................................... 17

Connections................................................................................. 13

Content browse view................................................................... 54

Content window .......................................................................... 54

Control Select, HDMI Setup ....................................................... 86

Cursor indicators ......................................................................... 10

Decode Type, Sound Program menu .................................... 76, 77

Decoder Mode, Input menu......................................................... 68

Dialogue Lift, OPTION menu..................................................... 52

Dimension, Sound Program menu .............................................. 77

Direct, Sound Program menu...................................................... 76

Disconnect, OPTION menu ........................................................ 53

Display Set, Function Setup ........................................................ 89

Distance, Speaker Setup.............................................................. 81

DSP Level, Sound Program menu .............................................. 74

DVD player connection............................................................... 24

Dynamic Range, Sound Setup..................................................... 83

Enhancer, Input menu ................................................................. 68

Extended Surround, OPTION menu ........................................... 52

External component connection.................................................. 20

External decoder connection....................................................... 28

FM antenna connection ............................................................... 31

FM Mode..................................................................................... 57

FM tuning.................................................................................... 55

Front panel .................................................................................... 8

Front panel display ...................................................................... 10

Front Presence L Level, Sound Program menu........................... 76

Front Presence R Level, Sound Program menu .......................... 77

Front speaker ............................................................................... 13

Function Setup............................................................................. 88

Game connection......................................................................... 28

HDMI Control function............................................................... 99

HDMI Control, HDMI Setup ...................................................... 86

HDMI indicator ........................................................................... 10

HDMI jack................................................................................... 20

HDMI monitor, Information menu.............................................. 92

HDMI Setup ................................................................................ 85

High-frequency sound adjustment............................................... 41

Information menu ........................................................................ 92

INIT, Advanced Setup menu....................................................... 98

Initial Delay, Sound Program menu ............................................ 74

Initial Volume, Sound Setup ....................................................... 84

Input menu................................................................................... 66

iPhone™ playback ...................................................................... 59

iPod Interlock, Input menu.......................................................... 69

iPod wireless system ................................................................... 62

iPod™ playback .......................................................................... 59

Jack.............................................................................................. 20

Language ..................................................................................... 91

Level, Speaker Setup................................................................... 81

Lipsync, Sound Setup.................................................................. 83

Liveness, Sound Program menu.................................................. 75

Index

APPENDIX

Index

En 118

Load, SCENE menu..................................................................... 71

Low-frequency sound adjustment................................................ 41

Manual Preset............................................................................... 56

Manual Setup, Speaker Setup ...................................................... 79

Manual Tuning............................................................................. 57

Max Volume, Sound Setup .......................................................... 83

Memory Guard, Function Setup .................................................. 91

Menu browse control ................................................................... 60

MON.CHK, Advanced Setup menu............................................. 97

Multi information display ............................................................ 10

Multi Zone ................................................................................... 88

Multi-format player connection ................................................... 28

Multi-zone function ................................................................... 103

MUTE indicator ........................................................................... 10

Normal tuning .............................................................................. 55

Now playing view ........................................................................ 54

ON SCREEN menu...................................................................... 48

On-screen display......................................................................... 12

OPTICAL jack ............................................................................. 20

OPTION menu ............................................................................. 50

Pairing, OPTION menu ............................................................... 53

Panorama, Sound Program menu................................................. 77

Parametric EQ, Speaker Setup ..................................................... 82

Party Mode Set, Multi Zone......................................................... 88

PHONES jack ................................................................................ 8

Portable audio player connection................................................. 28

Power Amp Assign, Manual Setup, Speaker Setup..................... 79

PREOUT connection ................................................................... 29

Presence speaker .......................................................................... 13

Presence speaker layout ............................................................... 14

Preset Select ................................................................................. 57

Pure Direct mode......................................................................... 45

Rear panel...................................................................................... 9

Remote control ............................................................................ 11

Remote control battery installation ............................................... 7

Remote control connection ......................................................... 29

Remote control, Controlling other components.......................... 93

REMOTE ID, Advanced Setup menu......................................... 97

Rename/Icon Select, Input menu ................................................ 67

Rename/Icon Select, SCENE menu ............................................ 72

Repeat, OPTION menu ............................................................... 53

Reset, SCENE menu ................................................................... 72

Resolution, Processing, Video Setup .......................................... 85

Reverb Delay, Sound Program menu.......................................... 75

Reverb Level, Sound Program menu .......................................... 76

Reverb Time, Sound Program menu........................................... 75

Room Size, Sound Program menu .............................................. 74

Save, SCENE menu .................................................................... 71

SCENE function.......................................................................... 42

SCENE menu .............................................................................. 70

Setup menu.................................................................................. 78

Shuffle, OPTION menu .............................................................. 53

SILENT CINEMA mode ............................................................ 44

Simple remote control ................................................................. 62

Sound program ............................................................................ 42

Sound Program menu.................................................................. 73

Sound Setup ................................................................................ 83

SP IMP., Advanced Setup menu ................................................. 96

Speaker connection ..................................................................... 13

Speaker indicators ....................................................................... 10

Speaker layout............................................................................. 14

Speaker setting ............................................................................ 32

Speaker Setup.............................................................................. 79

Standby Charge, Input menu....................................................... 68

Standby Through, HDMI Setup .................................................. 87

Straight Decoding Mode ............................................................. 43

Subwoofer ................................................................................... 13

Supplied accessories...................................................................... 7

Surround Back Initial Delay, Sound Program menu................... 74

Surround Back L Level, Sound Program menu .......................... 76

Surround Back Liveness, Sound Program menu......................... 75

Surround Back R Level, Sound Program menu .......................... 76

Surround Back Room Size, Sound Program menu ..................... 74

Surround back speaker ................................................................ 13

Surround Initial Delay, Sound Program menu ............................ 74

Surround L Level, Sound Program menu.................................... 76

Surround Liveness, Sound Program menu.................................. 75

Surround R Level, Sound Program menu ................................... 76

Surround Room Size, Sound Program menu............................... 74

Surround speaker......................................................................... 13

Test Tone, Speaker Setup............................................................ 82

Tone control ................................................................................ 41

Tone Control, OPTION menu ..................................................... 51

Trigger connection ...................................................................... 30

Trigger Output, Function Setup................................................... 90

TU, Advanced Setup menu ......................................................... 98

Tuner indicator ............................................................................ 10

TV Audio Input, HDMI Setup .................................................... 86

TV FORMAT, Advanced Setup menu........................................ 97

TV monitor connection ............................................................... 21

VIDEO AUX input cover.............................................................. 7

Video information, Information menu ........................................ 92

VIDEO jack................................................................................. 20

Video Out, Input menu................................................................ 69

Video Setup ................................................................................. 84

Virtual CINEMA DSP 3D mode................................................. 44

Virtual CINEMA DSP mode....................................................... 44

VOLTAGE SELECTOR ............................................................... 9

VOLUME...................................................................................... 8

VOLUME indicator..................................................................... 10

Volume Trim, OPTION menu..................................................... 53

APPENDIX

Index

En 119

YPAO........................................................................................... 32

Zone2 Set, Multi Zone ................................................................. 88

YC515A0/OMEN1

- 1 -

A.R. Systems 0320

Acme 0342

Acura 0323, 0343

ADC 0337

Admiral 0054, 0178, 0336,

0337, 0339, 0346,

0347

Advent 0158

Adventura 0057

Adyson 0277, 0282, 0342

Agashi 0277, 0282

Agazi 0337

Aiko 0277, 0282, 0320,

0323, 0342, 0343

Aim 0320

Aiwa 0078, 0379

Akai 0050, 0055, 0109,

0159, 0181, 0277,

0282, 0320, 0323,

0340, 0343, 0349,

0350

Akiba 0320, 0340

Akura 0320, 0323, 0337,

0340

Alaron 0277

Alba 0161, 0277, 0320,

0323, 0340, 0342,

0343, 0344, 0349,

0351, 0372, 0382

Albatron 0140

Alcyon 0171

Alleron 0059

Allorgan 0282

Allstar 0320, 0350

America Action 0179

AMOi 0276

Amplivision 0161, 0282, 0321,

0342

Amstrad 0320, 0323, 0337,

0340, 0343

Amtron 0058

Anam 0179, 0343

Anam National 0052, 0058

Anglo 0323, 0343

Anitech 0171, 0320, 0323,

0337, 0343

Ansonic 0161, 0168, 0320,

0323, 0341, 0343

AOC 0008, 0026, 0050,

0053

Apex 0039, 0111, 0217

Arcam 0277, 0282

Arcam Delta 0342

Aristona 0320, 0349, 0350

Arthur Martin 0321

ASA 0339, 0347

Asberg 0171, 0320, 0350

Astra 0343

Asuka 0277, 0282, 0337,

0340, 0342

Atlantic 0277, 0320, 0342,

0349, 0350

Atori 0323, 0343

Auchan 0321

Audiosonic 0161, 0282, 0320,

0340, 0342, 0343,

0349, 0350

AudioTon 0161, 0282, 0342

Audiovox 0058, 0179, 0194

Ausind 0171

Autovox 0171, 0282, 0337,

0339, 0342

Aventura 0051

Awa 0277, 0282

Axion 0156

Baird 0282

Bang & Olufsen 0180, 0339

Basic Line 0282, 0320, 0323,

0340, 0343, 0350

Bastide 0282, 0342

Baur 0320, 0349

Bazin 0282

Beko 0161, 0269, 0294,

0302, 0311, 0320,

0328, 0351

Belcor 0008

Bell & Howell 0019, 0054

Benq 0097, 0242, 0361

Beon 0320, 0349, 0350

Best 0161

Bestar 0161, 0320, 0350

Binatone 0282, 0342

Blue Sky 0320, 0340

Blue Star 0348

Boots 0282, 0342

BPL 0320, 0348

Bradford 0058, 0179

Brandt 0322, 0345

Brillian 0182

Brinkmann 0320

Brionvega 0320, 0339, 0349,

0350

Britannia 0277, 0282, 0342

Brockwood 0008

Broksonic 0109, 0179

Bruns 0339

BTC 0340

Bush 0269, 0282, 0283,

0304, 0320, 0323,

0328, 0332, 0340,

0343, 0344, 0346,

0348, 0349, 0350,

0372, 0382, 0463,

0470, 0472

Candle 0008, 0026, 0050,

0057

Capsonic 0337

Carena 0320

Carnivale 0050

Carrefour 0344

Carver 0010

Cascade 0320, 0323, 0343

Casio 0367

Cathay 0320, 0349, 0350

CCE 0183, 0282

Celebrity 0055, 0107

Celera 0039

Centurion 0320, 0349, 0350

Century 0339

CGE 0161, 0171

Changhong 0039

Chimei 0273

Cimline 0323, 0343

Citizen 0007, 0008, 0026,

0050, 0058

City 0323, 0343

Clarion 0179

Clarivox 0349

Clatronic 0161, 0171, 0282,

0320, 0323, 0337,

0340, 0342, 0343,

0350, 0351

CMS 0277

CMS Hightec 0282

Coby 0197

Colortyme 0008, 0026

Commercial Solutions

0021

Concerto 0008, 0026

Concorde 0323, 0343

Condor 0161, 0277, 0320,

0323, 0342, 0350,

0351

Contec 0179, 0277, 0323,

0342, 0343, 0344

Contec/Cony 0012, 0058

Continental Edison

0345

Cosmel 0323, 0343

Craig 0058, 0179

Crosley 0010, 0037, 0171,

0339

Crown 0058, 0161, 0171,

0179, 0320, 0323,

0343, 0349, 0350,

0351

CS Electronics 0277, 0340, 0342

CTC Clatronic 0341

CTX 0205

Curtis Mathes 0007, 0008, 0010,

0019, 0021, 0026,

0049, 0050, 0178

CXC 0058, 0179

Cybertron 0340

Cytron 0152

Daewoo 0007, 0008, 0026,

0037, 0053, 0167,

0266, 0275, 0277,

0282, 0315, 0320,

0323, 0331, 0335,

0342, 0343, 0350,

0381, 0465

Dainichi 0277, 0340

Dansai 0277, 0282, 0320,

0337, 0349, 0350

Dantax 0161, 0349

Dawa 0320

Daytron 0007, 0008, 0026,

0323, 0343

De Graaf 0346

Decca 0282, 0320, 0342,

0349, 0350

Dell 0145, 0245

Denver 0358, 0362

Desmet 0320, 0349, 0350

Diamant 0320

Diamond 0277

DiamondVision 0135, 0143

Dimensia 0049

Disney 0219

Dixi 0282, 0320, 0323,

0343, 0349, 0350

Dream Vision 0461, 0498

DTS 0323, 0343

Dual 0282, 0320, 0342

Dual-Tec 0342, 0343

Dumont 0008, 0030, 0062,

0282, 0339, 0341,

0342

Durabrand 0031, 0051, 0179,

0215

Dux 0349

Dwin 0178

Dynatron 0320, 0349, 0350

Dynex 0228, 0231

Elbe 0161, 0168, 0282,

0320

Elcit 0339

Electa 0348

ELECTRO TECH

0343

Electroband 0055, 0107

Electrograph 0176

Electrohome 0008, 0026, 0052,

0055

Element 0230

Elin 0277, 0320, 0323,

0342, 0349, 0350

Elite 0320, 0340, 0350

Elman 0341

Elta 0277, 0323, 0343

Emerson 0000, 0007, 0008,

0012, 0013, 0019,

0026, 0031, 0037,

0051, 0058, 0059,

0161, 0179, 0320,

0339

Emprex 0154

Envision 0008, 0026, 0050

Epson 0155, 0206, 0359

Erres 0320, 0349, 0350

ESA 0051

ESC 0282

Etron 0343

Eurofeel 0282

Euro-Feel 0337

Euroline 0349

Euroman 0161, 0277, 0282

Euromann 0320, 0337, 0342,

0350

Europhon 0277, 0282, 0320,

0341, 0342, 0350

Expert 0321

Exquisit 0320

Fenner 0323, 0343

Ferguson 0322, 0345, 0349

Fidelity 0277, 0320, 0342,

0346

Filsai 0282

Finlandia 0346

Finlux 0171, 0282, 0320,

0339, 0341, 0342,

0349, 0350

FIRST LINE 0342, 0343, 0350

Firstline 0277, 0282, 0320,

0323

Fisher 0019, 0161, 0282,

0339, 0342, 0344,

0351

Flint 0320, 0350

Formenti 0171, 0277, 0336,

0339, 0342, 0349

Formenti/Phoenix

0277

Fortress 0336, 0339

Fraba 0161, 0320

Friac 0161

Frontech 0282, 0323, 0337,

0343, 0346, 0347

Fujitsu 0059, 0069, 0074,

0075, 0282

Fujitsu General 0282

Fujitsu Siemens 0504, 0505, 0507,

0510, 0511

Funai 0051, 0058, 0059,

0112, 0113, 0115,

0118, 0119, 0179,

0337

Futuretech 0058, 0179

Galaxi 0320, 0351

Galaxis 0161, 0320

Gateway 0176, 0177, 0241

GBC 0323, 0343, 0344

GE 0008, 0021, 0023,

0026, 0027, 0031,

0034, 0049, 0052,

0056, 0209

Geant Casino 0321

GEC 0282, 0320, 0342,

0347, 0349, 0350

Geloso 0323, 0343, 0346

General Technic 0323, 0343

List of remote control codes

Liste des codes de commande

Liste der Fernbedienungscodes

Lista över fjärrstyrningskoder

Elenco dei codici di telecomando

Lista de códigos de mando a distancia

Lijst met afstandsbedieningscodes

- 2 -

Genexxa 0320, 0340, 0347,

0350

GFM 0128, 0227

Giant 0282

Gibralter 0008, 0030, 0050,

0062

GoldHand 0277

Goldline 0320

GoldStar 0007, 0008, 0012,

0026, 0031, 0050,

0053, 0161, 0277,

0282, 0320, 0323,

0342, 0343, 0346,

0349, 0350

Goodmans 0246, 0272, 0282,

0320, 0323, 0337,

0343, 0344, 0349,

0350, 0462, 0473,

0477

Gorenje 0161, 0351

GPM 0340

GPX 0129

Gradiente 0240

Graetz 0347

Granada 0171, 0282, 0320,

0321, 0342, 0344,

0346, 0349, 0350

Grandin 0340, 0343, 0348,

0349

Gronic 0282

Grundig 0160, 0161, 0171,

0310, 0320

Grunpy 0058, 0059, 0179

Haier 0157, 0233

Halifax 0277, 0282, 0337,

0342

Hallmark 0008, 0026, 0031

Hampton 0277, 0282, 0342

Hanseatic 0161, 0168, 0282,

0320, 0323, 0342,

0343, 0344, 0349,

0350

Hantarex 0320, 0323, 0343

Hantor 0320

Harman/Kardon 0010

Harvard 0058, 0179

Harwood 0320, 0323

Havermy 0178

HCM 0282, 0320, 0323,

0337, 0342, 0343,

0348

Hema 0282, 0323

Hewlett Packard 0192

Higashi 0277

HiLine 0320

Hinari 0320, 0323, 0340,

0343, 0344, 0349,

0350

Hisawa 0321, 0340, 0348

Hisense 0247

Hitachi 0008, 0012, 0026,

0066, 0084, 0092,

0093, 0120, 0172,

0173, 0255, 0270,

0271, 0282, 0320,

0335, 0338, 0342,

0344, 0346, 0347,

0365, 0382, 0448,

0456, 0467

Hornyphon 0320, 0350

Hoshai 0340

Huanyu 0277, 0342

Hygashi 0277, 0282, 0342

Hyper 0277, 0282, 0323,

0342, 0343

Hypson 0282, 0320, 0321,

0337, 0342, 0348,

0349, 0350

Hyundai 0141

Iberia 0320

ICE 0277, 0282, 0320,

0323, 0337, 0340,

0342, 0343, 0350

ICeS 0277

Ilo 0148, 0153

IMA 0058

Imperial 0161, 0171, 0320,

0347, 0350, 0351

Indiana 0320, 0349, 0350

Infinity 0010

InFocus 0250, 0327, 0363,

0479, 0508

Ingelen 0347

Ingersol 0323, 0343

Initial 0153

Inno Hit 0171, 0282, 0320,

0323, 0340, 0342,

0343, 0349, 0350

Innovation 0337, 0343

Insignia 0131, 0228, 0236,

0238

Inteq 0030

Interactive 0161

Interbuy 0323, 0343

Interfunk 0161, 0320, 0339,

0347, 0349, 0350

International 0277

Intervision 0161, 0282, 0320,

0337, 0341, 0342

Irradio 0171, 0320, 0323,

0340, 0343, 0349,

0350

Isukai 0320, 0340

ITC 0282, 0342

ITS 0277, 0320, 0340,

0348, 0350

ITT 0343, 0347

ITV 0320, 0343, 0349

Janeil 0057

JBL 0010

JC Penney 0007, 0008, 0026,

0027, 0049, 0053,

0056

JCB 0055, 0107

Jensen 0008, 0026

JVC 0012, 0014, 0015,

0056, 0064, 0065,

0067, 0169, 0174,

0297, 0314, 0344,

0350, 0375

Kaisui 0277, 0282, 0320,

0323, 0340, 0342,

0343, 0348

Kamosonic 0342

Kamp 0277, 0342

Kapsch 0347

Karcher 0161, 0320, 0342,

0343, 0349

Kawasho 0008, 0026, 0055,

0277

KEC 0179

Kendo 0161, 0320, 0341,

0346

Kenwood 0008, 0026, 0050

KIC 0282

Kingsley 0277, 0342

KLH 0039

Kloss Novabeam

0057, 0058

Kneissel 0161, 0168, 0320

Kolster 0320, 0350

Konka 0340

Korpel 0320, 0349, 0350

Korting 0161, 0339

Kosmos 0320

Koyoda 0343

KTV 0007, 0050, 0058,

0179, 0183, 0282,

0342

Kyoto 0277, 0282

Lasat 0161

Lenco 0323, 0343

Lenoir 0323, 0342, 0343

Leyco 0320, 0337, 0349,

0350

LG 0031, 0053, 0066,

0116, 0117, 0140,

0161, 0164, 0175,

0195, 0269, 0277,

0282, 0300, 0309,

0317, 0320, 0323,

0328, 0342, 0343,

0346, 0349, 0350,

0366, 0368, 0377,

0466, 0471, 0478

LG/GoldStar 0164

Liesenk 0349

Liesenkotter 0320

Life 0337, 0343

Lifetec 0320, 0323, 0337,

0343

Lloyds 0323

Loewe 0161, 0168, 0265,

0320, 0330, 0352

Loewe Opta 0339, 0349, 0350

Logik 0054

Luma 0320, 0323, 0346,

0349

Lumatron 0282, 0320, 0346,

0349, 0350

Lux May 0350

Luxman 0008, 0026

Luxor 0282, 0342, 0346

LXI 0010, 0019, 0021,

0026, 0027, 0031,

0049, 0111

M Electronic 0342, 0343, 0345,

0347, 0349, 0350

MAG 0096

Magnadyne 0339, 0341, 0349

Magnafon 0171, 0277, 0341,

0342

Magnavox 0008, 0009, 0010,

0013, 0026, 0032,

0033, 0048, 0050,

0128, 0211, 0212,

0224, 0226, 0239

Magnum 0337, 0343

Majestic 0054

Mandor 0337

Manesth 0282, 0320, 0337,

0342, 0349, 0350

Marantz 0008, 0010, 0026,

0050, 0204, 0320,

0349, 0350

Marelli 0339

Mark 0277, 0282, 0320,

0323, 0349, 0350

Masuda 0282

Matsui 0282, 0320, 0323,

0342, 0343, 0344,

0346, 0349, 0350,

0455

Matsushita 0017

Maxent 0147, 0176

Mediator 0320, 0349, 0350

Medion 0320, 0337, 0343

Megapower 0140

Megatron 0026, 0031

MElectronic 0277, 0282, 0320,

0323

Melvox 0321

Memorex 0019, 0026, 0031,

0053, 0054, 0137,

0215, 0323, 0343

Memphis 0323, 0343

Mercury 0320, 0323

Metz 0339

MGA 0008, 0026, 0031,

0050, 0053

Micromaxx 0337, 0343

Microstar 0337, 0343

Midland 0007, 0021, 0023,

0027, 0030, 0056,

0062

Minerva 0171

Minoka 0320, 0350

Mintek 0153

Mitsubishi 0008, 0026, 0031,

0053, 0066, 0084,

0093, 0098, 0150,

0178, 0289, 0320,

0339, 0344, 0350,

0376

Mivar 0161, 0168, 0171,

0277, 0282, 0342

Monivision 0140

Montgomery Ward

0054

Motion 0171

Motorola 0052, 0178

MTC 0008, 0026, 0050,

0053, 0161, 0277

Multi System 0349

Multitech 0058, 0161, 0179,

0183, 0277, 0282,

0320, 0323, 0341,

0342, 0343, 0344,

0346, 0349

Murphy 0277, 0342

NAD 0026, 0031, 0111

Naonis 0346

NEC 0008, 0026, 0050,

0052, 0053, 0072,

0103, 0282, 0344

Neckermann 0161, 0282, 0320,

0339, 0342, 0346,

0349, 0350, 0351

NEI 0320, 0349, 0350

Net-TV 0176

Neufunk 0320, 0323

New Tech 0343, 0350

New World 0340

NewTech 0282, 0320, 0323

Nicamagic 0277, 0342

Nikkai 0277, 0282, 0320,

0323, 0337, 0340,

0342, 0349, 0350

Nikko 0026, 0031, 0050

Nobliko 0171, 0277, 0341,

0342

Nokia 0347

Norcent 0201

Nordic 0282

Nordmende 0339, 0345, 0347,

0350

Nordvision 0349

Novatronic 0320

Oceanic 0321, 0347

Okano 0161, 0320, 0351

Olevia 0102, 0199, 0200,

0207, 0222

ONCEAS 0342

Onwa 0058, 0179

Opera 0320

Oppo 0130

Optimus 0017, 0019

Optoma 0144

Optonica 0178

Orbit 0320, 0350

Orion 0043, 0146, 0283,

0320, 0323, 0328,

0343, 0349, 0350

Orline 0320

Osaki 0282, 0320, 0337,

0340, 0342

Oso 0340

Otto Versand 0282, 0320, 0336,

0342, 0344, 0348,

0349, 0350

Pael 0277, 0342

Palladium 0161, 0282, 0320,

0342, 0351

Palsonic 0282

Panama 0277, 0282, 0320,

0323, 0337, 0342,

0343

Panasonic 0016, 0017, 0020,

0022, 0023, 0035,

0052, 0056, 0084,

0085, 0133, 0163,

0193, 0284, 0286,

0290, 0292, 0320,

0325, 0347, 0356

Panavision 0320

Pathe Cinema 0161, 0168, 0277,

0321, 0342

Pausa 0323, 0343

Penney 0021, 0023, 0031,

0050, 0111

Perdio 0277, 0320

Perfekt 0320

Philco 0008, 0009, 0010,

0012, 0026, 0050,

0052, 0053, 0161,

0171, 0320, 0339

Philharmonic 0282, 0342

Philips 0008, 0009, 0010,

0011, 0012, 0032,

0048, 0049, 0052,

0122, 0128, 0134,

0186, 0187, 0213,

0221, 0224, 0226,

- 3 -

0239, 0256, 0257,

0259, 0261, 0263,

0267, 0280, 0281,

0287, 0296, 0299,

0301, 0303, 0305,

0313, 0319, 0320,

0324, 0333, 0339,

0342, 0349, 0350,

0353, 0357, 0360,

0380, 0383, 0452,

0459, 0460

Philips Magnavox

0011, 0032, 0033

Phoenix 0161, 0277, 0320,

0339, 0349, 0350

Phonola 0277, 0320, 0339,

0349, 0350

Pilot 0007, 0008, 0050

Pioneer 0008, 0026, 0094,

0095, 0161, 0320,

0345, 0347, 0349,

0350, 0458

Plantron 0320, 0323, 0337,

0350

Playsonic 0282

Polaroid 0039, 0142, 0202,

0234

Poppy 0323, 0343

Portland 0007, 0008, 0026,

0053

Prandoni-Prince

0171, 0346

Precision 0282, 0342

Prima 0157, 0243, 0323,

0343, 0347

Princeton 0140

Prism 0023, 0056

Profex 0323, 0343

Profi-Tronic 0320, 0350

Proline 0320, 0350

Proscan 0021, 0027, 0049

Prosonic 0161, 0277, 0282,

0320, 0342, 0349

Protech 0282, 0337, 0341,

0342, 0343, 0349,

0350

Proton 0008, 0012, 0026,

0031

Protron 0196

PROVIEW 0096, 0246

Provision 0320, 0349

Pulsar 0008, 0030, 0062

Pye 0256, 0320, 0349,

0350, 0378

Pymi 0323, 0343

Quandra Vision 0321

Quasar 0017, 0023, 0052,

0056

Quelle 0282, 0320, 0337,

0342, 0349, 0350

Questa 0344

Radialva 0320

RadioShack 0019, 0021, 0031,

0050, 0179, 0320

RadioShack/Realistic

0007, 0008, 0012,

0026, 0049, 0058

Radiola 0282, 0320, 0349,

0350

Radiomarelli 0320, 0339

Radiotone 0161, 0320, 0323,

0350

Rank 0344

RCA 0008, 0021, 0024,

0025, 0026, 0027,

0042, 0049, 0052,

0053, 0063, 0136,

0225

Realistic 0019, 0031, 0050,

0179

Recor 0320

Redstar 0320

Reflex 0320

Revox 0161, 0320, 0349,

0350

Rex 0337, 0346, 0347

RFT 0161, 0168, 0339

Rhapsody 0277

R-Line 0320, 0349, 0350

Roadstar 0323, 0337, 0340,

0343

Robotron 0339

Rowa 0277, 0282

Royal Lux 0161

RTF 0339

Runco 0030, 0050, 0062

Saba 0298, 0322, 0339,

0345, 0347

Saisho 0282, 0323, 0337,

0342, 0343

Salora 0346, 0347

Sambers 0171, 0341

Sampo 0007, 0008, 0026,

0050, 0176

Samsung 0004, 0005, 0006,

0007, 0008, 0012,

0026, 0031, 0036,

0050, 0053, 0076,

0077, 0079, 0114,

0124, 0125, 0126,

0127, 0139, 0161,

0183, 0185, 0190,

0191, 0258, 0264,

0277, 0282, 0320,

0323, 0334, 0337,

0342, 0343, 0349,

0350, 0351, 0373,

0453, 0468

Sandra 0277, 0282, 0342

Sansui 0043, 0109, 0320,

0350

Sanyo 0008, 0019, 0068,

0070, 0071, 0099,

0161, 0168, 0223,

0237, 0277, 0282,

0288, 0295, 0323,

0342, 0344, 0369,

0469

SBR 0320, 0349

Sceptre 0235, 0244

Schaub Lorenz 0347

Schneider 0282, 0316, 0318,

0320, 0333, 0340,

0342, 0349, 0350,

0382

Scotch 0026, 0031

Scott 0008, 0012, 0026,

0031, 0058, 0059,

0149, 0179

Sears 0008, 0010, 0019,

0021, 0026, 0027,

0031, 0049, 0051,

0059, 0111

SEG 0277, 0282, 0320,

0323, 0337, 0341,

0342, 0344, 0349,

0382

SEI 0320

SEI-Sinudyne 0339, 0341, 0347

Seleco 0344, 0346, 0347

Sencora 0323, 0343

Sentra 0323

Serino 0277

Sharp 0000, 0001, 0002,

0003, 0007, 0008,

0012, 0026, 0060,

0088, 0089, 0091,

0138, 0165, 0170,

0178, 0198, 0229,

0262, 0278, 0279,

0291, 0308, 0312,

0336, 0344, 0354,

0370, 0449, 0450,

0451, 0464, 0474,

0476

Sheng Chia 0178

Shogun 0008

Siarem 0320, 0339, 0341

Sierra 0320, 0350

Siesta 0161

Signature 0054

Silva 0277

Silver 0344

Singer 0321, 0339, 0341

Sinudyne 0320, 0339, 0341,

0349

Skantic 0347

Solavox 0347

Sonitron 0161, 0282

Sonoko 0282, 0320, 0323,

0337, 0342, 0343,

0349, 0350

Sonolor 0321, 0347

Sontec 0161, 0320, 0349,

0350

Sony 0038, 0044, 0045,

0047, 0055, 0104,

0105, 0107, 0110,

0123, 0184, 0220,

0248, 0249, 0251,

0252, 0254, 0326,

0343, 0344, 0371,

0374, 0457, 0475

Sound & Vision 0340, 0341

Soundesign 0008, 0026, 0031,

0058, 0059, 0179

Soundwave 0320, 0349, 0350

Squareview 0051

SSS 0008, 0058, 0179

Standard 0282, 0320, 0323,

0340, 0342, 0343,

0350

Starlite 0058, 0179, 0320,

0323, 0349

Stenway 0348

Stern 0346, 0347

Strato 0320, 0323

Stylandia 0282

Sunkai 0343

Sunstar 0320, 0323

Sunwood 0320, 0323, 0343,

0350

Superla 0277, 0282, 0342

Superscan 0013, 0178

SuperTech 0277, 0320, 0323

Supra 0323, 0343

Supre-Macy 0057

Supreme 0055, 0107

Susumu 0340

Sutron 0323, 0343

SVA 0151

Sydney 0277, 0282, 0342

Sylvania 0008, 0009, 0010,

0011, 0013, 0026,

0048, 0050, 0051,

0128, 0227, 0253

Symphonic 0051, 0058, 0062,

0128, 0179, 0215

Syntax 0199

Syntax-Brillian 0199

Sysline 0349

Sytong 0277

Tandy 0178, 0282, 0336,

0340, 0342, 0347

Tashiko 0277, 0282, 0342,

0344, 0346

Tatung 0052, 0177, 0282,

0320, 0342, 0349,

0350

TCM 0337, 0343

Teac 0282, 0320

Tec 0282, 0323, 0342,

0343

Technics 0017, 0023, 0056

TechniSat 0274, 0496, 0497,

0499

Techwood 0008, 0023, 0026,

0056

TEDELEX 0282

Teknika 0007, 0008, 0010,

0012, 0026, 0053,

0054, 0058, 0059,

0179

Teleavia 0345

Telecor 0282, 0320

Telefunken 0320, 0322, 0345,

0350

Telegazi 0320

Telemeister 0320

Telesonic 0320

Telestar 0320

Teletech 0320, 0323, 0343,

0349

Teleton 0282, 0342

Televideon 0277

Televiso 0321

Tensai 0282, 0320, 0323,

0340, 0343, 0350

Tesmet 0350

Tevion 0337, 0343

Texet 0277, 0282, 0323,

0342

Thomson 0162, 0188, 0189,

0285, 0320, 0322,

0342, 0345, 0350

Thorn 0320, 0349

TMK 0008, 0026, 0031

TNCi 0030

Tokai 0282, 0320, 0350

Tokyo 0277, 0342

Tomashi 0348

Toshiba 0018, 0019, 0040,

0041, 0046, 0073,

0100, 0103, 0108,

0109, 0111, 0121,

0132, 0166, 0208,

0210, 0214, 0217,

0260, 0268, 0282,

0283, 0293, 0304,

0306, 0307, 0329,

0344, 0355, 0454

Totevision 0007

Towada 0282, 0347

Trakton 0282

Trans Continens 0282, 0320

Transtec 0277

Trident 0282

Triumph 0320

Uher 0161, 0171, 0320,

0347, 0350

Ultravox 0277, 0320, 0339,

0341, 0342

Unic Line 0320

United 0349

Universum 0161, 0171, 0282,

0320, 0337, 0349,

0350, 0351

Univox 0320

Vector Research 0050

Vestel 0282, 0320, 0346,

0347, 0349, 0350,

0351

Vexa 0320, 0323, 0343,

0349

Victor 0015, 0344, 0350

VIDEOLOGIC 0277

Videologique 0277, 0282, 0340,

0342

VideoSystem 0320, 0350

Videotechnic 0277, 0282

Vidikron 0010

Vidtech 0008, 0026, 0031,

0053

Viewsonic 0176, 0203, 0232,

0364

Viking 0057

Viore 0148

Visiola 0277, 0342

Vision 0282, 0320, 0350

Vizio 0008, 0177, 0218,

0242, 0500, 0501,

0502, 0503, 0506

Vortec 0320, 0349, 0350

Voxson 0171, 0320, 0339,

0346, 0347, 0350

Waltham 0282, 0320, 0342

Wards 0008, 0009, 0010,

0026, 0031, 0048,

0049, 0050, 0053,

0054, 0059

Watson 0320, 0349, 0350

Watt Radio 0277, 0341, 0342

Waycon 0111

Wega 0320, 0339, 0344

Wegavox 0323

Weltblick 0282, 0320, 0349,

0350

Westinghouse 0107, 0216, 0220

White Westinghouse

0037, 0090, 0277,

0320, 0341, 0342,

0349

Wincom 0101, 0106

Xrypton 0320

- 4 -

Yamaha 0008, 0026, 0050,

0053, 0080, 0081,

0082, 0083, 0086,

0087

Yamishi 0282, 0320

Yok an 03 20

Yoko 0161, 0277, 0282,

0320, 0323, 0337,

0340, 0342, 0343,

0349, 0350

Yorx 0340

Zanussi 0282, 0346

Zenith 0008, 0028, 0029,

0030, 0031, 0054,

0061, 0062

VCR

ABS 1016

Adventura 1069

Adyson 1008

Aiwa 1024, 1026, 1027,

1069

Akai 1021, 1027

Akiba 1008, 1029

Akura 1008, 1027, 1029

Alba 1008, 1009, 1024,

1025, 1029, 1030

Alienware 1016

Ambassador 1030

American High 1068

Amstrad 1008, 1009, 1026

Anitech 1008, 1029

Apex 1088

ASA 1028, 1031

Asha 1070

Asuka 1008, 1026, 1028,

1029, 1031

Audio Dynamics 1064

Audiosonic 1009

Audiovox 1071

Baird 1009, 1025, 1026,

1027

Bang & Olufsen 1017

Basic Line 1008, 1009, 1024,

1025, 1029, 1030

Baur 1028

Beaumark 1070

Bell & Howell 1065

Bestar 1009, 1025, 1030

Black Panther Line

1009, 1025

Blaupunkt 1028

Bondstec 1008, 1030

Broksonic 1100

Bush 1008, 1009, 1024,

1025, 1029, 1049,

1051, 1063, 1217

Calix 1071

Candle 1070, 1071

Canon 1068

Cathay 1009

Catron 1030

CGE 1026, 1027

Cimline 1008, 1024, 1029

CineVision 1104

Citizen 1070, 1071

Clatronic 1008, 1030

Colortyme 1064

Condor 1009, 1025, 1030

Craig 1070, 1071

Crown 1008, 1009, 1025,

1029, 1030

Curtis Mathes 1064, 1068, 1070

Cybernex 1070

CyberPower 1016

Daewoo 1009, 1025, 1030,

1038, 1069, 1223

Dansai 1008, 1009, 1029

Dantax 1024

Daytron 1009, 1025

DBX 1064

De Graaf 1028

Decca 1026, 1027, 1028

Dell 1016

Denko 1008

DiamondVision 1096

DigiFusion 1014

DIRECTV 1019, 1105, 1110,

1111, 1113, 1116,

1122

Dish Network 1018

Dishpro 1018

Dual 1009, 1027, 1028

Dumont 1026, 1028

Durabrand 1114

Dynatech 1069

Echostar 1018

Elbe 1009

Elcatech 1008

Electrohome 1071

Electrophonic 1071

Elsay 1008

Elta 1008, 1009, 1029

Emerson 1008, 1020, 1068,

1069, 1071

ESC 1009, 1025

Etzuko 1008, 1029

Expressvu 1018

Ferguson 1027

Fidelity 1008, 1026

Finlandia 1028

Finlux 1026, 1027, 1028

Firstline 1008, 1024, 1029,

1031

Fisher 1065

Flint 1024

Formenti/Phoenix

1028

Frontech 1030

Fuji 1068

Fujitsu 1026

Funai 1026, 1069

Galaxy 1026

Garrard 1069

Gateway 1016

GBC 1029, 1030

GE 1068, 1070

GEC 1028

Geloso 1029

General 1030

General Technic 1024

GOI 1018

GoldHand 1008, 1029

Goldstar 1026, 1031, 1064,

1071

Goodmans 1008, 1009, 1025,

1026, 1029, 1030,

1031

Gradiente 1069

Graetz 1027

Granada 1028

Grandin 1008, 1009, 1025,

1026, 1029, 1030,

1031

Grundig 1028, 1029

Hanseatic 1009, 1028, 1031

Harley Davidson 1069

Harman/Kardon 1064

Harwood 1008

HCM 1008, 1029

Headquarter 1065

Hewlett Packard 1016

Hinari 1008, 1009, 1024,

1029

Hisawa 1024

Hitachi 1011, 1026, 1027,

1028, 1046, 1062

HNS 1110

Howard Computers

1016

HP 1016

HTS 1018

Hughes 1111, 1113, 1122

Hughes Network Systems

1110, 1116

Humax 1012, 1110, 1113

Hush 1016

Hypson 1008, 1009, 1024,

1029

iBUYPOWER 1016

Impego 1030

Imperial 1026

Inno Hit 1008, 1009, 1025,

1028, 1029, 1030

Innovation 1024

Instant Replay 1068

Interbuy 1008, 1031

Interfunk 1028

Intervision 1009, 1026

Irradio 1008, 1029, 1031

ITT 1027

ITV 1009, 1025, 1031

JC Penney 1064, 1065, 1068,

1070, 1071

JCL 1068

JVC 1007, 1018, 1027,

1039, 1064, 1065,

1066, 1067, 1078,

1089, 1092, 1093,

1094, 1095, 1113,

1208, 1209, 1212,

1213, 1215, 1218

Kaisui 1008, 1029

Karcher 1028

Kendo 1008, 1024, 1025,

1030

Kenwood 1027, 1064, 1065

Kodak 1068, 1071

Korpel 1008, 1029

Kyoto 1008

Lenco 1025

Leyco 1008, 1029

LG 1010, 1026, 1031,

1047, 1054, 1056,

1071, 1103, 1221

Lifetec 1024

Linksys 1016

Lloyd's 1069

Loewe Opta 1028, 1031

Logik 1008, 1029

Lumatron 1009, 1025

Luxor 1008

LXI 1071

M Electronic 1026

Magnavox 1020, 1068, 1114,

1126

Magnin 1071

Manesth 1008, 1029

Marantz 1028, 1064, 1065,

1068

Mark 1009

Marta 1071

Matsui 1024, 1031

Matsushita 1068

Media Center PC

1016

Mediator 1028

Medion 1024

MEI 1068

Memorex 1023, 1026, 1031,

1065, 1068, 1069,

1070, 1071, 1098,

1114

Memphis 1008, 1029

MGN Technology

1070

Micromaxx 1024

Microsoft 1016

Microstar 1024

Migros 1026

Mind 1016

Mitsubishi 1026, 1028, 1079

Motorola 1068

MTC 1070

Multitech 1008, 1026, 1028,

1029, 1030, 1069,

1070

Murphy 1026

NEC 1027, 1064, 1065

Neckermann 1027, 1028

NEI 1028

Nesco 1008, 1029

Nikkai 1008, 1009, 1030

Nikko 1071

Niveus Media 1016

Noblex 1070

Nokia 1009, 1027

Nordmende 1027

Northgate 1016

Oceanic 1026, 1027

Okano 1008, 1009, 1024

Olympus 1068

Optimus 1071

Orion 1023, 1024, 1051,

1115, 1217

Orson 1026

Osaki 1008, 1026, 1029,

1031

Otto Versand 1028

Palladium 1008, 1027, 1029,

1031

Panasonic 1000, 1022, 1044,

1055, 1068, 1072,

1085, 1090, 1091,

1120, 1121, 1214

Pathe Marconi 1027

Perdio 1026

Philco 1008, 1068

Philips 1006, 1013, 1028,

1035, 1040, 1045,

1046, 1050, 1058,

1059, 1061, 1068,

1076, 1101, 1110,

1113, 1116, 1117,

1122, 1126, 1210,

1211

Philips Magnavox

1076

Phonola 1028

Pilot 1071

Pioneer 1028, 1036

Polaroid 1088, 1099

Portland 1009, 1025, 1030

Prinz 1026

Profex 1029

Proline 1026

Proscan 1019

Prosonic 1009, 1024

Pulsar 1114

Pye 1028, 1102

Quarter 1065

Quartz 1065

Quasar 1068

Quelle 1026, 1028

Radialva 1008

RadioShack 1071

RadioShack/Realistic

1065, 1068, 1069,

1070, 1071

Radiola 1028

Radix 1071

Randex 1071

RCA 1019, 1068, 1070,

1075, 1110, 1113,

1122, 1125

Realistic 1065, 1068, 1069,

1070, 1071

ReplayTV 1022, 1123

Rex 1027

RFT 1008, 1028, 1030

Ricavision 1016

Roadstar 1008, 1009, 1025,

1029, 1031

Royal 1008

Runco 1114

Saba 1027

Saisho 1024, 1029

Samsung 1002, 1034, 1041,

1043, 1057, 1060,

1070, 1084, 1110,

1116, 1122, 1124,

1220, 1222

Samurai 1008, 1030

Sanky 1114

Sansui 1023, 1027, 1106,

1115

Sanyo 1032, 1065, 1070

Saville 1009

SBR 1028

Schaub Lorenz 1026, 1027

Schneider 1008, 1009, 1024,

1025, 1026, 1028,

1029, 1030, 1031

Sears 1065, 1068, 1071

SEG 1008, 1009, 1029

SEI-Sinudyne 1028

Seleco 1027

Sentra 1008, 1030

Sentron 1008, 1029

Sharp 1003, 1033, 1077,

1107, 1127, 1219

Shintom 1008, 1029

Shivaki 1031

Shogun 1070

Siemens 1031

Silva 1031

Silver 1009

Singer 1068

- 5 -

Sinudyne 1028

Solavox 1030

Sonic Blue 1022, 1123

Sonneclair 1008

Sonoko 1009, 1025

Sontec 1031

Sony 1001, 1016, 1048,

1053, 1073, 1074,

1080, 1081, 1082,

1083, 1108, 1118,

1216

Stack 1016

Stack 9 1016

Standard 1009, 1025

Stern 1009

STS 1068

Sunkai 1024

Sunstar 1026

Suntronic 1026

Sunwood 1008, 1029

Superscan 1020

Sylvania 1020, 1068, 1069,

1102, 1126

Symphonic 1008, 1069, 1126

Systemax 1016

Tagar Systems 1016

Taisho 1024

Tandberg 1009

Tandy 1065

Tashiko 1026, 1071

Tatung 1026, 1027, 1028

TCM 1015, 1024, 1042

Teac 1009, 1069

Tec 1008, 1009, 1030

Technics 1068

Teknika 1068, 1069, 1071

Teleavia 1027

Telefunken 1027

Teletech 1008, 1009

Tenosal 1008, 1029

Tensai 1008, 1026, 1029,

1031

Tevion 1024

Thomson 1005, 1027

Thorn 1027

Tivo 1108, 1110, 1111,

1113, 1117, 1118,

1119, 1122

TMK 1070

Tokai 1008, 1029, 1031

Tonsai 1029

Toshiba 1004, 1016, 1027,

1028, 1037, 1049,

1052, 1086, 1087,

1097, 1109, 1112,

1194

Totevision 1070, 1071

Touch 1016

Towada 1008, 1029

Towika 1008, 1029

TVA 1030

Uher 1031

UltimateTV 1019

Ultravox 1009

Unitech 1070

United Quick Star

1009, 1025

Universum 1026, 1028, 1031

Vector Research 1064

Video Concepts 1064

Videon 1024

Videosonic 1070

Viewsonic 1016

Voodoo 1016

Wards 1068, 1069, 1070,

1071

Weltblick 1031

XR-1000 1068, 1069

Yamaha 1064, 1065

Yamishi 1008, 1029

Yokan 1008, 1029

Yoko 1008, 1029, 1030,

1031

Zenith 1114

ZT Group 1016

DVD

4Kus 2051

Accurian 2142

Advent 2155, 2251

AEG 2362

Airis 2364

Aiwa 2322

Akai 2145, 2177, 2179,

2248

Akura 2356

Alba 2064, 2165, 2186,

2337, 2346

Alco 2149

Alize 2361

Allegro 2133

Amitech 2362

Amphion MediaWorks

2195

AMW 2195, 2363

Apex 2030, 2124, 2125,

2126, 2127, 2130,

2131

Apple 2241

Arrgo 2138

Asono 2364

Aspire 2152, 2222

Astar 2240

ATACOM 2364

Audiovox 2061, 2149

Avious 2367

Awa 2363

Axion 2249

Bang & Olufsen 2128

Baze 2367

BBK 2364

Bellagio 2363

Best Buy 2359

Blaupunkt 2131

Blue Parade 2157

Boghe 2382

Brainwave 2362

Brandt 2148, 2188

Broksonic 2145, 2146

Bush 2064, 2110, 2170,

2268, 2290, 2346,

2358, 2367, 2383

California Audio Labs

2151

Cambridge Audio

2354

CAT 2352, 2353

CAVS 2192

Centrum 2353

CGV 2354, 2362

Changhong 2140

Cinetec 2363

CineVision 2133, 2237

Clatronic 2358, 2367

Coby 2031, 2046, 2360

Conia 2383

Continental Edison

2363

Crown 2362

C-Tech 2355

Curtis Mathes 2139

CVG 2377

CyberHome 2022, 2098, 2138,

2187, 2336

Cytron 2244

Daenyx 2363

Daewoo 2001, 2133, 2276,

2298, 2330, 2362,

2363, 2377

Daewoo International

2363

Dalton 2357

Dansai 2362, 2381

Daytek 2184, 2195, 2363

Dayton 2363

DEC 2358

Decca 2362

Denon 2059, 2151, 2193,

2332

Denver 2356, 2358, 2360,

2370

Denzel 2380

Desay 2205

Diamond 2354, 2355

DiamondVision 2225, 2232

Disney 2010, 2028

DK Digital 2339

Dmtech 2176

Dual 2380

Durabrand 2136

DVX 2355

Easy Home 2359

Eclipse 2354

E-Dem 2364

Electrohome 2362

Elin 2362

Elta 2341, 2361, 2362

Emerson 2129, 2137, 2150

Enterprise 2129

Enzer 2380

Epson 2247

ESA 2137

Finlux 2354, 2362, 2367

Fintec 2377

Fisher 2134

Funai 2137

Gateway 2051

GE 2029, 2131, 2156

Gericom 2351

GFM 2226

Giec 2382

Global Solutions 2355

Global Sphere 2355

Go Video 2133, 2213

Goodmans 2165, 2280, 2291,

2358, 2371, 2376,

2382

GPX 2227

Gradiente 2151

Graetz 2380

Greenhill 2131

Grundig 2349

Grunkel 2362, 2366

GVG 2377

H&B 2358

H_her 2364

Haaz 2354, 2355

Haier 2254

Harman/Kardon 2047, 2135

HiMAX 2359

Hitachi 2062, 2090, 2115,

2274, 2282, 2316,

2359, 2380

Hiteker 2130

Home Tech Industries

2364

Hyundai 2366

Ilo 2245

Initial 2131, 2245

Innovation 2182

Insignia 2002, 2137, 2253

Integra 2157

Irradio 2053

iSymphony 2246

JBL 2135

JVC 2020, 2096, 2097,

2099, 2100, 2101,

2102, 2103, 2106,

2107, 2160, 2257,

2260, 2262, 2263,

2321, 2324, 2326,

2327, 2343, 2464,

2465, 2468, 2469,

2471

Jwin 2198

Kansai 2360

Kawasaki 2149

Kennex 2362

Kenwood 2041, 2151, 2348

KeyPlug 2362

Kiiro 2362

Kingavon 2358

Kiss 2380

KLH 2131, 2149

Koda 2358

Koss 2013, 2148, 2158

KXD 2359

Landel 2143

Lasonic 2132

Lawson 2355

Lecson 2381

Lenco 2358, 2362, 2367

Lenoxx 2136, 2153

LG 2002, 2033, 2038,

2057, 2129, 2133,

2189, 2191, 2223,

2238, 2270, 2288,

2335, 2373, 2375

Life 2182

Lifetec 2182

Limit 2355

Liquid Video 2158

Liteon 2043, 2051, 2142

Loewe 2320

LogicLab 2355

Magnavox 2025, 2050, 2137,

2150, 2159, 2224,

2230, 2358

Magnex 2367

Majestic 2360

Marantz 2328

Marquant 2362

Matsui 2148, 2378

McIntosh 2199

Mecotek 2362

Medion 2182

Memorex 2028, 2145, 2234

MiCO 2354, 2382

Micromaxx 2182

Microsoft 2156

Microstar 2182

Minoka 2362

Minowa 2367

Mintek 2131, 2245

Mitsubishi 2003

Mizuda 2358, 2359

Monyka 2380

Mustek 2186

Mx Onda 2354

Mystral 2366

Naiko 2362

Nesa 2131

Neufunk 2380

Nevir 2362

Next Base 2143

Nexxtech 2243

NU-TEC 2383

Onkyo 2159, 2368

Oopla 2051

Oppo 2196, 2255

Optim 2381

Optimus 2180

Orava 2358

Orbit 2363

Orion 2073, 2110

Oritron 2148, 2158

P&B 2358

Pacific 2355

Panasonic 2011, 2024, 2034,

2042, 2058, 2062,

2066, 2067, 2093,

2116, 2117, 2118,

2119, 2120, 2121,

2122, 2123, 2151,

2159, 2164, 2166,

2167, 2172, 2173,

2175, 2209, 2214,

2275, 2277, 2278,

2281, 2282, 2283,

2301, 2374, 2470

Parasound 2197

peeKTON 2364

Philips 2008, 2012, 2025,

2044, 2050, 2051,

2053, 2060, 2072,

2108, 2111, 2147,

2159, 2163, 2169,

2174, 2181, 2185,

2230, 2261, 2266,

2267, 2286, 2287,

2289, 2295, 2300,

2302, 2317, 2328,

2338, 2342, 2350,

2467

Phonotrend 2367

Pioneer 2016, 2017, 2018,

2019, 2035, 2092,

2094, 2095, 2109,

2157, 2180, 2190,

2212, 2269, 2272,

2299, 2304, 2305,

2306, 2307, 2308,

- 6 -

2309, 2310, 2311,

2344, 2345, 2347,

2379

Pointer 2362

Polaroid 2125, 2215, 2235

Portland 2362

Powerpoint 2363

Prima 2252

Proceed 2130

Proscan 2156

Prosonic 2360, 2377

Protron 2202

Provision 2358

Pye 2144

Qwestar 2148

Raite 2380

RCA 2021, 2029, 2104,

2105, 2131, 2149,

2156, 2157, 2229

RedStar 2356, 2360, 2362

Regent 2153

Reoc 2355

Rimax 2361

Rio 2133

Roadstar 2331, 2358

Ronin 2363

Rotel 2203

Rowa 2154, 2383

Rownsonic 2353

Saba 2148, 2188

Sabaki 2355

Saivod 2362

Sampo 2141

Samsung 2000, 2045, 2077,

2112, 2113, 2114,

2115, 2151, 2200,

2216, 2219, 2228,

2264, 2265, 2271,

2279, 2294, 2303,

2329, 2365

Sansui 2073, 2145, 2354,

2355, 2362

Sanyo 2134, 2145, 2217,

2292

ScanMagic 2186

Schaub Lorenz 2362

Schneider 2176

Scientific Labs 2355

Scott 2161, 2357

Seeltech 2364

SEG 2162, 2355, 2363,

2380

Sharp 2006, 2040, 2088,

2091, 2182, 2194,

2220, 2221, 2231,

2236, 2293, 2340

Shinsonic 2245

Sigmatek 2359, 2364

Silva 2356

Singer 2354, 2355

Skymaster 2325, 2355

Skyworth 2356

Slim Art 2362

SM Electronic 2355

Sonic Blue 2133

Sontech 2366

Sony 2004, 2005, 2007,

2009, 2014, 2015,

2023, 2026, 2027,

2052, 2068, 2069,

2070, 2071, 2074,

2075, 2084, 2085,

2087, 2168, 2171,

2208, 2210, 2211,

2258, 2273, 2284,

2285, 2312, 2313,

2314, 2315, 2318,

2319, 2466

Soundmaster 2355

Soundmax 2355

Spectra 2363

Spectroniq 2201

Standard 2355

Star Cluster 2355

Starmedia 2358, 2364

Sungale 2204

Sunkai 2362

Superscan 2150

Supervision 2355

Sylvania 2012, 2137, 2150,

2178, 2230, 2239

Symphonic 2108, 2230

Synn 2355

T.D.E. Systems 2366

Tatung 2001, 2362

TCM 2182, 2297

Teac 2149, 2333, 2355,

2383

Tec 2356

Technics 2151

Technika 2362, 2367

Telefunken 2353

Tensai 2362

Tevion 2182, 2355, 2357

Theta Digital 2157

Thomson 2183, 2188, 2334,

2372

Tokai 2356, 2380

Top Suxess 2364

Toshiba 2032, 2036, 2037,

2039, 2048, 2049,

2054, 2055, 2072,

2073, 2076, 2078,

2079, 2086, 2145,

2159, 2218, 2233,

2256, 2259, 2296,

2369

TRANScontinents

2363, 2367

Transonic 2367

Trio 2362

Trutech 2242

TruVision 2359

TSM 2364

Umax 2361

United 2367

Urban Concepts 2159

US Logic 2245

Venturer 2149

Viewmaster 2364

Vocopro 2206

VocoStar 2207

Waitec 2364

Welltech 2382

Westinghouse 2063, 2250

Wharfedale 2354, 2355

Woxter 2361, 2364

Xbox 2156, 2183

Xlogic 2355, 2362

XMS 2362

Xoro 2382

Yamada 2051, 2361, 2363

Yamaha 2056, 2064, 2065,

2080, 2081, 2082,

2083, 2089, 2118,

2151, 2323

Yamakawa 2363, 2380

Yukai 2186

Zenith 2002, 2129, 2133,

2159, 2223

Blu-ray Disc

LG 2033

Panasonic 2011, 2209, 2214

Pioneer 2212

Samsung 2045, 2113

Sharp 2194, 2220, 2221

Sony 2075

Yamaha 2064, 2474

DVR

Bush 2110

Hitachi 2090

Panasonic 2066, 2067, 2093,

2116, 2117, 2119,

2120, 2122, 2123

Philips 2108, 2111

Pioneer 2016, 2017, 2018,

2019, 2092, 2094,

2095, 2109

RCA 2105

Samsung 2113, 2219

Sharp 2088, 2091

Sony 2084, 2085, 2087

Toshiba 2086

Yamaha 2089, 2118

DVD Recorder

Aspire 2222

Astar 2240

Broksonic 2146

Go Video 2213

Hitachi 2062

Insignia 2002

Irradio 2053

JVC 2100, 2101, 2106,

2107

LG 2033, 2057, 2223,

2238

Liteon 2043

Panasonic 2011, 2034, 2058,

2062, 2116, 2117,

2119, 2120, 2121,

2123

Philips 2008, 2044, 2050,

2051, 2147

Pioneer 2017, 2035

Pye 2144

Samsung 2000, 2112, 2216

Sansui 2073

Sanyo 2217

Sony 2004, 2005, 2007,

2052, 2068, 2069,

2074, 2208, 2210,

2211

Sylvania 2239

Toshiba 2032, 2036, 2037,

2039, 2049, 2054,

2055, 2076

Yamaha 2056

Cable

ABC 3002, 3003, 3017,

3066, 3067, 3086,

3093, 3119, 3122

ADB 3020

Adelphia 3081

Alcatel 3016

Americast 3124

Amstrad 3022, 3098

Antronix 3065, 3070

Archer 3070

Arcon 3098

AT&T 3095

Axis 3098

Bell South 3124

Cable Vision 3092

Cabletenna 3065

Cabletime 3104

Cableview 3087

Clearmaster 3127

ClearMax 3127

Clyde Cablevision

3105

Colour Voice 3068

Comcast 3084, 3088, 3117

Comcrypt 3107

Comtronics 3069

Contec 3074

Coolmax 3127

COX 3084

Cryptovision 3110

Director 3084

Eastern 3075

Everquest 3123

Fidelity 3098

Filmnet 3107

Filmnet Cablecrypt

3111

Filmnet Comcrypt

3111

Finlux 3097

Focus 3126

Foxtel 3022

France Telecom 3100, 3101

Freebox 3023

GC Electronics 3070

GE 3066, 3093

GEC 3105

Gemini 3072, 3123

General Instrument

3017, 3025, 3066,

3084, 3090, 3096,

3117

Goldstar 3120

Gooding 3099

Grundig 3098, 3099

Hamlin 3073, 3078

Hirschmann 3097

Hitachi 3066

HomeChoice 3106

Humax 3021, 3080, 3083

ITT Nokia 3097

Jasco 3123

Jerrold 3017, 3018, 3025,

3066, 3072, 3084,

3090, 3096, 3119,

3123

JVC 3099

Kabel Deutschland

3024, 3027, 3121

Macab 3101

Magnavox 3079

Maspro 3099

Matsui 3099

MegaCable 3117

Memorex 3076, 3122

Minerva 3099

Mnet 3107

Motorola 3025, 3026, 3084,

3088, 3090, 3095,

3117

Movie Time 3077, 3109

Mr Zapp 3101

Multichoice 3107

Multitech 3127

NEC 3064

NET Brazil 3085

Nokia 3097

Noos 3101

NSC 3077

Oak 3074

Pace 3006, 3089, 3121

Palladium 3099

Panasonic 3112, 3118, 3122

Paragon 3122

Philips 3068, 3071, 3079,

3099, 3100, 3101,

3103

Pioneer 3001, 3006, 3094,

3098, 3114, 3116,

3120

Popular Mechanics

3126

Proscan 3066, 3093

Pulsar 3122

PVP Stereo Visual Matrix

3018

Quasar 3122

RadioShack 3123, 3127

RCA 3030, 3031, 3087,

3118

Realistic 3070

Recoton 3126

Regal 3078

Regency 3075

Rembrandt 3066

Runco 3122

Sagem 3101

Samsung 3069, 3089, 3114,

3120

SAT 3098

Scientific Atlanta

3000, 3001, 3002,

3003, 3006, 3028,

3029, 3081, 3086,

3089, 3094, 3095,

3108

Signal 3072, 3123

Signature 3066

Sony 3092, 3125

Sprucer 3118

Standard Component

3115

Starcom 3017, 3072, 3119,

3123

Stargate 3072, 3123

Starquest 3072, 3123

Supercable 3090

Supermax 3127

Tele+1 3107, 3111

Telepiu 3107

Thomson 3082, 3091

TIME WARNER

3084

- 7 -

Tocom 3067

Torx 3017

Toshiba 3122

Tristar 3127

Tudi 3102

Tusa 3072, 3123

TV86 3077

Unika 3065, 3070

United Cable 3018, 3119

Universal 3065, 3070

Universum 3097, 3099

V2 3127

Videoway 3019

View Star 3074, 3077, 3079

Viewmaster 3127

Vision 3127

Visiopass 3097, 3100, 3101

Vortex View 3127

Wittenberg 3098

Zenith 3113, 3122, 3124

Zentek 3126

Satellite

AB Sat 4216, 4217

AccessHD 4104

ADB 4220

AGS 4216

Akai 4053, 4055

Alba 4001, 4004, 4006,

4007, 4062, 4217

Aldes 4005, 4007, 4010

Allsat 4048, 4053, 4055

Allsonic 4005, 4008, 4024

Alltech 4217

Alpha 4053

Alpha Digital 4104

Alphastar 4077

Amitronica 4217

Amstrad 4011, 4035, 4217,

4218

Anglo 4217

Ankaro 4005, 4008, 4024,

4217

Anttron 4001, 4004

Apollo 4001

Armstrong 4011, 4053

Artec 4100

Asat 4053, 4055

ASLF 4217

Astacom 4216

Astra 4009, 4011, 4054,

4217, 4219

Astro 4004, 4008, 4010,

4015, 4024, 4213,

4218, 4219

AudioTon 4004, 4048

Aurora 4222

Austar 4222

Axiel 4216

Axis 4008, 4009, 4024,

4050

Best 4008, 4024

Blaupunkt 4015

Blue Sky 4217

Boca 4011, 4054, 4059,

4217

Boston 4216

Brain Wave 4013

Broadcast 4012

Broco 4217

BSkyB 4035, 4041

BT 4216

Bubu Sat 4217

Bush 4006, 4045

Cambridge 4218

Canal Satellite 4213

Canal+ 4213

CaptiveWorks 4099

Channel Master 4007, 4110

Chaparral 4075

CHEROKEE 4216

Chess 4212, 4217

CityCom 4006, 4215, 4219

Clatronic 4013

CNT 4010

Comag 4080, 4081, 4082,

4083, 4086

Commlink 4005

Comtech 4050

Condor 4008, 4024, 4219

Connexions 4014, 4024

Conrad 4024, 4215, 4218,

4219

Conrad Electronic

4217, 4219

Contec 4050

Coolsat 4096

Cosat 4048

Coship 4109

Crown 4011

Daeryung 4014

Daewoo 4057, 4217

DDC 4007

Delega 4007

Dew 4050

Diamond 4051

Digiality 4219

Digital Stream 4105

DIRECTV 4056, 4064, 4067,

4068, 4070, 4071,

4074, 4107, 4116,

4119, 4121, 4122,

4123, 4127, 4192,

4193, 4194, 4195,

4196, 4197, 4198,

4199, 4200, 4201,

4202, 4203, 4206,

4207, 4221

Discoverer 4212

Discovery 4216

Diseqc 4216

Dish Network 4018, 4065, 4089,

4092, 4094, 4095,

4117

Dishpro 4018, 4117

Distrisat 4053

Ditristrad 4048

DNT 4014, 4053, 4055

Drake 4072

DStv 4222

Dune 4024

Echostar 4014, 4018, 4065,

4089, 4117, 4217

Einhell 4001, 4005, 4011,

4217, 4218

Elap 4216, 4217

Elekta 4010

Elsat 4217

Elta 4001, 4008, 4024,

4048, 4053, 4055

Emanon 4001

Emme Esse 4008, 4024

Engel 4217

Ep Sat 4006

EURIEULT 4031

Eurodec 4052

Europa 4053, 4218, 4219

Europhon 4219

Eurosat 4011

Eurosky 4024, 4011, 4008,

4215, 4218, 4219

Eurostar 4011, 4215, 4219

Eutelsat 4217

Exator 4001, 4004

Expressvu 4117

Fenner 4024, 4212, 4217

Ferguson 4006, 4052, 4214

Fidelity 4218

Finlandia 4006

Finlux 4006

FinnSat 4050, 4052

Flair Mate 4217

Foxtel 4222

Freecom 4001, 4049, 4218

FTEmaximal 4024, 4217

Fuba 4024, 4001, 4008,

4014, 4015, 4055,

4215

Galaxis 4024, 4005, 4008,

4009, 4050, 4048,

4215, 4222

GE 4093, 4066, 4111,

4197

General Instrument

4073, 4019

GMI 4011

GOI 4117

Goldbox 4213

GoldStar 4049

Goodmans 4029, 4002, 4006

Goodmind 4111

Grandin 4031

Grothusen 4001, 4049

Grundig 4006, 4004, 4015,

4035, 4211, 4218,

4222

Hänsel & Gretel 4219

Hantor 4001, 4013

Hanuri 4010

Hauppauge 4044

Heliocom 4219

Helium 4219

Hinari 4007

Hirschmann 4024, 4015, 4210,

4218, 4219, 4216

Hisawa 4013

Hisense 4016

Hitachi 4114, 4006, 4199,

4203

Homecast 4087, 4084, 4085

Houston 4048

HTS 4117

Hughes 4064, 4068, 4194,

4192, 4196, 4202

Hughes Network Systems

4071

Humax 4097, 4025, 4030,

4060

Huth 4005, 4011, 4012,

4013, 4050, 4048,

4219, 4223

Hypson 4031

Ilo 4016

Imex 4031

Innovation 4008

Insignia 4107

Intertronic 4011

Intervision 4048, 4219

ITT Nokia 4006

Jerrold 4019

Johansson 4013

JOK 4216

JSR 4048

JVC 4089, 4065, 4117,

4029

Kamm 4217

Kathrein 4015, 4055, 4053,

4063, 4034, 4042,

4215, 4216, 4217

Kathrein Eurostar

4215

Klap 4216

Konig 4219

Kosmos 4049

KR 4004

Kreiselmeyer 4015

K-SAT 4217

Kyostar 4001

L&S Electronic 4024

Lasat 4024, 4010, 4008,

4054, 4215, 4212,

4219

Lasonic 4108

Lenco 4024, 4001, 4049,

4215, 4219, 4217

Leng 4013

Lennox 4048

Lenson 4218

Lexus 4053

LG 4103, 4107, 4049

Lifesat 4024, 4008, 4212,

4217

Lifetec 4008

Lorenzen 4219

Lorraine 4049

Lupus 4024, 4008

Luxor 4218

Lyonnaise 4052

Macab 4052

Magnavox 4127, 4101

Manata 4031, 4216, 4217

Manhattan 4006, 4010, 4048,

4216

Marantz 4055

Mascom 4010

Maspro 4006, 4217

Matsui 4216

Max 4219

Mediabox 4213

Mediamarkt 4011

Mediasat 4009, 4213, 4218

Medion 4024, 4008, 4217

Medison 4217

Mega 4055, 4053

Memorex 4127

Metronic 4031, 4028, 4001,

4004, 4005, 4010,

4217

Metz 4015

Micro electronic 4218, 4219, 4217

Micro Technology

4217

MicroGem 4106

Micromaxx 4024, 4008

Microstar 4008

Microtec 4217

Minerva 4015

Mitsubishi 4006, 4015, 4202

Mitsumi 4054

Morgan's 4011, 4054, 4055,

4053, 4217

Motorola 4090, 4091, 4088,

4019

Multichoice 4222

Multitec 4212

Muratto 4049

Mysat 4217

Navex 4013

Neuhaus 4009, 4048, 4218,

4219, 4217

Neusat 4217

Next Level 4019

NextWave 4223

Nikko 4011, 4217

Nokia 4006, 4040

Nordmende 4001, 4006, 4007,

4010, 4052

Nova 4222

Novis 4013

Oceanic 4051

Octagon 4001, 4004, 4050

Okano 4011

Optex 4048

Optus 4213, 4222, 4223

Orbitech 4001, 4212, 4213,

4218

OSat 4004

Otto Versand 4015

Pace 4006, 4015, 4035,

4043, 4047, 4216

Pacific 4051

Packsat 4216

Palcom 4007

Palladium 4011, 4218

Palsat 4212, 4218

Panasat 4222

Panasonic 4121, 4126, 4124,

4006, 4035, 4036,

4221, 4198

Panda 4006, 4219

Pansat 4125

Patriot 4216

Paysat 4127

PCT 4110

Philco 4101

Philips 4071, 4068, 4127,

4006, 4055, 4053,

4061, 4033, 4213,

4216, 4196, 4202,

4203, 4201, 4206

Phoenix 4050

Phonotrend 4006, 4005, 4048

Pioneer 4046, 4213

Polsat 4052

Predki 4013

Premiere 4048, 4213

Priesner 4011

Primestar 4076

Profile 4216

Promax 4006

Prosat 4007, 4005

Proscan 4093, 4066, 4122,

4197

Protek 4051

Proton 4016

Provision 4010

- 8 -

Quadral 4024, 4007, 4005,

4008, 4216

Quelle 4015, 4215, 4219

Quiero 4052

RadioShack 4019

Radiola 4055, 4053

Radix 4014, 4037

Rainbow 4004

RCA 4093, 4066, 4112,

4113, 4118, 4119,

4116, 4122, 4197,

4207

Realistic 4078

Redpoint 4009

Redstar 4024, 4008

RFT 4005, 4055, 4053

Roadstar 4217

Roch 4031

Rover 4024, 4217

Saba 4010, 4215, 4219,

4216

Sabre 4006

Sagem 4023, 4052

Sakura 4050

Samsung 4064, 4071, 4069,

4123, 4120, 4003,

4000, 4001, 4032,

4196, 4200

SAT 4007, 4218

Sat Cruiser 4223

Sat Partner 4001, 4004, 4010,

4013, 4049, 4218

Sat Team 4217

Satcom 4012, 4219

Satec 4217

Satelco 4024

Satford 4012

Satmaster 4012

Satplus 4212

Schneider 4008, 4212, 4216

Schwaiger 4051, 4212, 4219

SCS 4215

Seemann 4011, 4009, 4014

SEG 4024, 4001, 4008,

4013

Seleco 4048

Servi Sat 4031, 4217

Siemens 4015

Silva 4049

Skantin 4217

Skardin 4009

Skinsat 4218

SKR 4217

Skymaster 4017, 4022, 4005,

4212, 4217

Skymax 4055, 4053

SkySat 4212, 4218, 4219,

4217

Skyvision 4048

SM Electronic 4212, 4217

Smart 4215, 4217

Sony 4067, 4070, 4213

SR 4011, 4054

Star Choice 4019

Starland 4217

Starring 4013

Start Trak 4001

Strong 4024, 4001, 4004,

4008, 4049, 4222

STS 4115

STVI 4031

Sumida 4011

Sunny Sound 4024

Sunsat 4217

Sunstar 4024, 4011, 4054

Supermax 4223

Tandberg 4052

Tandy 4004

Tantec 4006

TCM 4008

Techniland 4012

TechniSat 4021, 4026, 4027,

4014, 4053, 4038,

4039, 4212, 4213,

4218

Technology 4222

Technosat 4223

Technowelt 4219

Teco 4011, 4054

Telanor 4007

Telasat 4215, 4219

Telecom 4217

Telefunken 4017, 4001, 4216

Teleka 4004, 4011, 4014,

4218, 4219

Telemaster 4010

Telesat 4219

Telestar 4212, 4213, 4218

Televes 4006, 4218

Telewire 4048

Tempo 4223

Tevion 4008, 4217

Thomson 4020, 4006, 4052,

4058, 4208, 4215,

4213, 4219, 4216,

4217

Thorens 4051

Thorn 4006

Tivax 4104

Tivo 4196

Tokai 4053

Tonna 4006, 4012, 4048,

4218, 4217

Toshiba 4194, 4202, 4203

Triad 4049

Triasat 4218

Triax 4015, 4215, 4218,

4217

Turnsat 4217

Tvonics 4214

Twinner 4031, 4217

UEC 4222

Uher 4212

UltimateTV 4070

Uniden 4079, 4127

Unisat 4011, 4050, 4053

Unitor 4013

Universum 4015, 4215, 4219

US Digital 4016

Variosat 4015

Vega 4024

Ventana 4055, 4053

Viewsat 4098

Visiosat 4013, 4048, 4216,

4217

Voom 4019

Vortec 4001

Welltech 4212

WeTeKom 4212, 4218

Wevasat 4006

Wewa 4006

Winersat 4013

Wisi 4006, 4014, 4015,

4218, 4219

Woorisat 4010

Worldsat 4216

Xrypton 4024

XSat 4217

Zehnder 4024, 4010, 4008,

4209, 4215

Zenith 4102, 4107, 4195

Zodiac 4004

Yamaha 5082, 5095

CD Recorder

Yamaha 5083

Yamaha 5080, 5081, 5086

Tape

Yamaha 5084, 5087

Tuner

Yamaha 5066, 5071, 5085,

5088, 5090, 5092,

5094

Yamaha 5091, 5093

SIRIUS

Yamaha 5064, 5067

DOCK

Yamaha 5068, 5089

NET

Yamaha 5076, 5079

Yamaha 2080

Amplifier

Yamaha 5019, 5020

Yamaha RX-V767 El manual del propietario

Marca: Yamaha

Modelo: RX-V767

Categoría: Receptores AV

Tipo: El manual del propietario

Descargar PDF

informe

en otros idiomas

English: Yamaha RX-V767 Owner's manual
português: Yamaha RX-V767 Manual do proprietário

Yamaha RX-V767 El manual del propietario

Yamaha RX-V767 El manual del propietario

en otros idiomas

Artículos relacionados

Otros documentos