Grandstream UCM6200 series Quick Installation Guide

Tipo
Quick Installation Guide
For Warranty and RMA information, please visit www.grandstream.com
UCM6204 IP PBX Appliance
Quick Installation Guide
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : +1 (617) 566 - 9300
Fax: +1 (617) 249 - 1987
www.grandstream.com
1 2
The UCM6204 is not pre-congured to support or
carry emergency calls to any type of hospital, law
enforcement agency, medical care unit (“Emergency
Service(s)”) or any other kind of Emergency Service.
You must make additional arrangements to access
Emergency Services. It is your responsibility to pur-
chase SIP-compliant Internet telephone service, prop-
erly congure the UCM6204 to use that service, and
periodically test your conguration to conrm that it
works as you expect. If you do not do so, it is your re-
sponsibility to purchase traditional wireless or landline
telephone services to access Emergency Services.
GRANDSTREAM DOES NOT PROVIDE CON-
NECTIONS TO EMERGENCY SERVICES VIA THE
UCM6204. NEITHER GRANDSTREAM NOR ITS
OFFICERS, EMPLOYEES OR AFFILIATES MAY BE
HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS.
YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS
OR CAUSES OF ACTION ARISING FROM OR RE-
LATING TO YOUR INABILITY TO USE THE UCM6204
TO CONTACT EMERGENCY SERVICES, AND YOUR
FAILURE TO MAKE ADDITIONAL ARRANGEMENTS
TO ACCESS EMERGENCY SERVICES IN ACCOR-
DANCE WITH THE IMMEDIATELY PRECEDING
PARAGRAPH.
PACKAGE CONTENTS:
EN
PRECAUTIONS:
• Do not attempt to open, disassemble, or modify the device.
• Do not use a third party power adapter.
Do not expose this device to temperatures outside the range of 0 °C to +40 °C for
operating or -10 °C to +60 °C for storage.
Do not expose this device to environment outside of the following humidity range:
10-90% RH (non-condensing).
• Do not power cycle the device during system boot up or rmware upgrade. You
may corrupt rmware images and cause the unit to malfunction.
1 X UCM6204 Main Case 1 X Ethernet Cable
1 X 12V Power Adapter
OVERVIEW:
UCM6204 is an innovative IP PBX appliance designed for small to medium busi-
ness. Powered by an advanced hardware platform with robust system resources,
the UCM6204 offers a highly versatile state-of-the-art Unied Communication
(UC) solution for converged voice, video, data, fax and video surveillance ap-
plication needs. Incorporating industry-leading features and performance, the
UCM6204 offers quick setup, easy deployment and unrivaled reliability all at an
unprecedented price point.
1 X Quick Installation Guide
1 X GPL License
12V
11 12
CONECTANDO EL UCM6204:
Puerto LAN DC 12V 4 x Puertos FXO
Ranura de tarjeta SD
Puerto USB
1. Conecte un extremo de un cable Ethernet RJ-45 en el puerto WAN del
UCM6204.
2. Conecte el otro extremo del cable Ethernet RJ-45 en el puerto de enlace de
un switch/hub.
3. Conecte el adaptador de alimentación de 12V DC en el conector de aliment-
ación de 12 V DC en la parte posterior de la UCM6204. Inserte el enchufe prin-
cipal del adaptador de alimentación a una toma de corriente protegida contraso-
bretensión.
4. Espere a que el UCM6204 inicie. La pantalla LCD en la parte frontal mostrará
la información de hardware cuando el proceso de arranque comienza.
5. Una vez que el UCM6204 está correctamente conectado a la red, el indicador
LED para el WAN en la parte frontal estará en color verde y en la pantalla apa-
rece la dirección IP asignada.
6. (Opcional) Conecte las líneas PSTN de la toma de la pared a los puertos FXO,
conectar líneas analógicas (teléfonos y fax) a los puertos FXS.
Resetear
Tierra
USO DEL MENÚ POR TECLADO DEL UCM6204:
1. Conecte un ordenador a la misma red que el UCM6204.
2. Asegúrese de que el UCM6204 está correctamente encendido y muestra su
dirección IP en la pantalla LCD.
3. Abra un navegador web en el ordenador y escriba la dirección URL del
UCM6204 en el siguiente formato: http(s)://Direccion-IP:Puerto
El protocolo predeterminado es HTTPS y el número de puerto predeterminado
es 8089.
4. La página web de inicio de sesión GUI mostrará (ver gura más adelante).
Introduzca el nombre de usuario de administrador predeterminado “admin” y
contraseña.
Nota: Las unidades fabricadas a partir de enero de 2017 tienen una unica con-
traseña aleatoria pegada en la parte inferior del equipo. Las unidades más viejas
utilizan “admin” como contraseña por defecto.
5. Para la información detallada de las conguraciones de extensiones SIP,
líneas PSTN, troncos SIP y todos los ajustes del sistema a través de la inter-
faz Web GUI, por favor descargue el manual de usuario UCM6204 desde aquí:
http://www.grandstream.com/support
1. Pulse el botón “Bajar” o “OK” para comenzar a navegar por las opciones del
menú.
2. Pulse el botón “Bajar” para navegar por las diferentes opciones del menú.
Pulse el botón “OK” para seleccionar una entrada.
3. En la opción del menú, seleccione “Volver” para regresar al menú anterior.
4. La pantalla LCD volverá a la pantalla por defecto (de inicio) después de estar
inactiva durante más de 20 segundos.
Pantalla
LCD
Teclas de
Navegación
USB con
indicador LED
FXS con indicador LED
WAN con
indicador LED
SD Card con indicador LED
FXO con
indicador LED
Indicadores
LED
LAN con
indicador LED
CONFIGURACION DEL UCM6204 ATRAVEZ DE LA
INTERFAZ WEB DE USUARIO
Puerto WAN
2 x Puertos FXS
13 14
Le UCM6204 n’est pas préconguré pour prendre en
charge ou de procéder les appels d’urgence à tout
type d’hôpital, d’application de la loi, ou unité de soins
médicaux (“Service (s) d’urgence”) ou tout autre type
de service d’urgence. Vous devez faire des arrange-
ments pour l’accès aux services d’urgence. C’est
votre responsabilité d’acheter un service téléphonique
Internet compatible SIP, congurer correctement le
UCM6204 à utiliser ce service et, périodiquement, de
tester votre conguration an de conrmer qu’il fonc-
tionne comme prévu. Si vous ne le faites pas, c’est
votre responsabilité d’acheter un accès au service -
léphonique traditionnel sans l ou laire an d’accéder
aux services d’urgence.
GRANDSTREAM NE FOURNIT AUCUNE CONNEX-
ION AUX SERVICES D’URGENCE VIA LE UCM6204.
NI GRANDSTREAM, NI SES DIRIGEANTS, EMPLOY-
ES OU FILIALES PEUVENT ETRE TENUS RESPON-
SABLE POUR TOUTE RECLAMATION OU CAUSE
D’ACTION DECOULANT OU RELATIF A VOTRE IN-
CAPACITE D’UTILISER LE UCM6204 POUR CON-
TACTER LES SERVICES D’URGENCE ET VOTRE
ECHEC DE FAIRE DES ARRANGEMENTS SUP-
PLEMENTAIRES POUR ACCEDER AUX SERVICES
D’URGENCE EN CONFORMITE AVEC LE PARA-
GRAPHE PRECEDENT.
CONTENU DU PACK:
FR
• Ne pas tenter d’ouvrir, de désassembler, ou demodier le dispositif.
• Ne pas utiliser un adaptateur d’alimentation tiers.
Ne pas exposer cet appareil à des températures hors de la plage de 0 °C à
+40 °C en opération ou -10 °C à +60 °C en stockage.
• Ne pas exposer cet appareil à un environnement avec humidité hors de la plage
de 10-90% RH (sans condensation).
• Veuillez ne pas éteindre le UCM6204 pendant le démarrage du système ou la
mise à jour du rmware. Cela risque de rompre l’image du rmware et en con
séquence rendre l’unité inutilisable.
1 X UCM6204 Boîtier Principal 1 X Câble Ethernet
1 X 12V Adaptateur Secteur
PRESENTATION:
UCM6204 est une appliance IP PBX innovatrice conçue pour les petites et moy-
ennes entreprises. Doté d’une plateforme matérielle avancée et de ressources
système robustes, UCM6204 offre une grande souplesse, et l’état-de-l’art de la
solution des communications uniées (UC) pour une convergence de la voix, vi-
déo, donnée fax et les besoin des applications de vidéo surveillance. Intégration
des fonctionnalités et performances leaders de l’industrie, la UCM6204 offre une
installation rapide, un déploiement facile et une connectivité sans rival, tout cela
à un prix sans précédent.
PRECAUTIONS:
1 X Guide d’installation rapide
1 X Licence GPL
12V
37 38
FCC Caution:
Any Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Regulatory Information
U.S. FCC Part 68 Statement
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. The unit bears a label on the back which contains among
other information a product identier in the format US: GNIIS00BUCM6204. If
requested, this number must be provided to the telephone company.
This equipment uses the following standard jack types for network connection:
RJ11C.
This equipment contains an FCC compliant modular jack. It is designed to be
connected to the telephone network or premises wiring using compatible modular
plugs and cabling which comply with the requirements of FCC Part 68 rules.
The Ringer Equivalence Number, or REN, is used to determine the number of
devices which may be connected to the telephone line. An excessive REN may
cause the equipment to not ring in response to an incoming call. In most areas,
the sum of the RENs of all equipment on a line should not exceed ve (5.0).
In the unlikely event that this equipment causes harm to the telephone network,
the telephone company can temporarily disconnect your service. The telephone
company will try to warn you in advance of any such disconnection, but if advance
notice isn’t practical, it may disconnect the service rst and notify you as soon as
possible afterwards. In the event such a disconnection is deemed necessary, you
will be advised of your right to le a complaint with the FCC.
From time to time, the telephone company may make changes in its facilities,
equipment, or operations which could affect the operation of this equipment. If
this occurs, the telephone company is required to provide you with advance no-
tice so you can make the modications necessary to obtain uninterrupted service.
There are no user serviceable components within this equipment. See Warranty
yer for repair or warranty information.
It shall be unlawful for any person within the United States to use a computer or
other electronic device to send any message via a telephone facsimile unless
such message clearly contains, in a margin at the top or bottom of each transmit-
ted page or on the rst page of the transmission, the date and time it is sent and
an identication of the business, other entity, or individual sending the message
and the telephone number of the sending machine or of such business, other
entity, or individual. The telephone number provided may not be a 900 number or
any other number for which charges exceed local or long distance transmission
charges. Telephone facsimile machines manufactured on and after December 20,
1992, must clearly mark such identifying information on each transmitted mes-
sage. Facsimile modem boards manufactured on and after December 13, 1995,
must comply with the requirements of this section.
This equipment cannot be used on public coin phone service provided by the
telephone company.
Connection to Party Line Service is subject to state tariffs. Contact your state
public utility commission, public service commission, or corporation commission
for more information.

Transcripción de documentos

Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com UCM6204 IP PBX Appliance Quick Installation Guide For Warranty and RMA information, please visit www.grandstream.com EN The UCM6204 is not pre-configured to support or carry emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is your responsibility to purchase SIP-compliant Internet telephone service, properly configure the UCM6204 to use that service, and periodically test your configuration to confirm that it works as you expect. If you do not do so, it is your responsibility to purchase traditional wireless or landline telephone services to access Emergency Services. GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO EMERGENCY SERVICES VIA THE UCM6204. NEITHER GRANDSTREAM NOR ITS OFFICERS, EMPLOYEES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS. YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR INABILITY TO USE THE UCM6204 TO CONTACT EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH. PRECAUTIONS: • Do not attempt to open, disassemble, or modify the device. • Do not use a third party power adapter. • Do not expose this device to temperatures outside the range of 0 °C to +40 °C for operating or -10 °C to +60 °C for storage. • Do not expose this device to environment outside of the following humidity range: 10-90% RH (non-condensing). • Do not power cycle the device during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction. OVERVIEW: UCM6204 is an innovative IP PBX appliance designed for small to medium business. Powered by an advanced hardware platform with robust system resources, the UCM6204 offers a highly versatile state-of-the-art Unified Communication (UC) solution for converged voice, video, data, fax and video surveillance application needs. Incorporating industry-leading features and performance, the UCM6204 offers quick setup, easy deployment and unrivaled reliability all at an unprecedented price point. PACKAGE CONTENTS: 1 X UCM6204 Main Case V 12 1 X 12V Power Adapter 1 1 X Ethernet Cable 1 X Quick Installation Guide 1 X GPL License 2 1. Pulse el botón “Bajar” o “OK” para comenzar a navegar por las opciones del menú. CONECTANDO EL UCM6204: Ranura de tarjeta SD Resetear Puerto WAN Tierra 2. Pulse el botón “Bajar” para navegar por las diferentes opciones del menú. Pulse el botón “OK” para seleccionar una entrada. 3. En la opción del menú, seleccione “Volver” para regresar al menú anterior. 4. La pantalla LCD volverá a la pantalla por defecto (de inicio) después de estar inactiva durante más de 20 segundos. Puerto USB DC 12V Puerto LAN 2 x Puertos FXS 4 x Puertos FXO 1. Conecte un extremo de un cable Ethernet RJ-45 en el puerto WAN del UCM6204. 2. Conecte el otro extremo del cable Ethernet RJ-45 en el puerto de enlace de un switch/hub. 3. Conecte el adaptador de alimentación de 12V DC en el conector de alimentación de 12 V DC en la parte posterior de la UCM6204. Inserte el enchufe principal del adaptador de alimentación a una toma de corriente protegida contrasobretensión. 4. Espere a que el UCM6204 inicie. La pantalla LCD en la parte frontal mostrará la información de hardware cuando el proceso de arranque comienza. 5. Una vez que el UCM6204 está correctamente conectado a la red, el indicador LED para el WAN en la parte frontal estará en color verde y en la pantalla aparece la dirección IP asignada. 6. (Opcional) Conecte las líneas PSTN de la toma de la pared a los puertos FXO, conectar líneas analógicas (teléfonos y fax) a los puertos FXS. CONFIGURACION DEL UCM6204 ATRAVEZ DE LA INTERFAZ WEB DE USUARIO 1. Conecte un ordenador a la misma red que el UCM6204. 2. Asegúrese de que el UCM6204 está correctamente encendido y muestra su dirección IP en la pantalla LCD. 3. Abra un navegador web en el ordenador y escriba la dirección URL del UCM6204 en el siguiente formato: http(s)://Direccion-IP:Puerto El protocolo predeterminado es HTTPS y el número de puerto predeterminado es 8089. 4. La página web de inicio de sesión GUI mostrará (ver figura más adelante). Introduzca el nombre de usuario de administrador predeterminado “admin” y contraseña. Nota: Las unidades fabricadas a partir de enero de 2017 tienen una unica contraseña aleatoria pegada en la parte inferior del equipo. Las unidades más viejas utilizan “admin” como contraseña por defecto. 5. Para la información detallada de las configuraciones de extensiones SIP, líneas PSTN, troncos SIP y todos los ajustes del sistema a través de la interfaz Web GUI, por favor descargue el manual de usuario UCM6204 desde aquí: http://www.grandstream.com/support USO DEL MENÚ POR TECLADO DEL UCM6204: 11 LAN con indicador LED WAN con USB con indicador LED indicador LED Pantalla LCD Teclas de Navegación Indicadores LED FXO con indicador LED FXS con indicador LED SD Card con indicador LED 12 FR Le UCM6204 n’est pas préconfiguré pour prendre en charge ou de procéder les appels d’urgence à tout type d’hôpital, d’application de la loi, ou unité de soins médicaux (“Service (s) d’urgence”) ou tout autre type de service d’urgence. Vous devez faire des arrangements pour l’accès aux services d’urgence. C’est votre responsabilité d’acheter un service téléphonique Internet compatible SIP, configurer correctement le UCM6204 à utiliser ce service et, périodiquement, de tester votre configuration afin de confirmer qu’il fonctionne comme prévu. Si vous ne le faites pas, c’est votre responsabilité d’acheter un accès au service téléphonique traditionnel sans fil ou filaire afin d’accéder aux services d’urgence. GRANDSTREAM NE FOURNIT AUCUNE CONNEXION AUX SERVICES D’URGENCE VIA LE UCM6204. NI GRANDSTREAM, NI SES DIRIGEANTS, EMPLOYES OU FILIALES PEUVENT ETRE TENUS RESPONSABLE POUR TOUTE RECLAMATION OU CAUSE D’ACTION DECOULANT OU RELATIF A VOTRE INCAPACITE D’UTILISER LE UCM6204 POUR CONTACTER LES SERVICES D’URGENCE ET VOTRE ECHEC DE FAIRE DES ARRANGEMENTS SUPPLEMENTAIRES POUR ACCEDER AUX SERVICES D’URGENCE EN CONFORMITE AVEC LE PARAGRAPHE PRECEDENT. PRECAUTIONS: • Ne pas tenter d’ouvrir, de désassembler, ou demodifier le dispositif. • Ne pas utiliser un adaptateur d’alimentation tiers. • Ne pas exposer cet appareil à des températures hors de la plage de 0 °C à +40 °C en opération ou -10 °C à +60 °C en stockage. • Ne pas exposer cet appareil à un environnement avec humidité hors de la plage de 10-90% RH (sans condensation). • Veuillez ne pas éteindre le UCM6204 pendant le démarrage du système ou la mise à jour du firmware. Cela risque de rompre l’image du firmware et en con séquence rendre l’unité inutilisable. PRESENTATION: UCM6204 est une appliance IP PBX innovatrice conçue pour les petites et moyennes entreprises. Doté d’une plateforme matérielle avancée et de ressources système robustes, UCM6204 offre une grande souplesse, et l’état-de-l’art de la solution des communications unifiées (UC) pour une convergence de la voix, vidéo, donnée fax et les besoin des applications de vidéo surveillance. Intégration des fonctionnalités et performances leaders de l’industrie, la UCM6204 offre une installation rapide, un déploiement facile et une connectivité sans rival, tout cela à un prix sans précédent. CONTENU DU PACK: 1 X UCM6204 Boîtier Principal V 12 1 X 12V Adaptateur Secteur 13 1 X Câble Ethernet 1 X Guide d’installation rapide 1 X Licence GPL 14 FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 37 Regulatory Information U.S. FCC Part 68 Statement This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. The unit bears a label on the back which contains among other information a product identifier in the format US: GNIIS00BUCM6204. If requested, this number must be provided to the telephone company. This equipment uses the following standard jack types for network connection: RJ11C. This equipment contains an FCC compliant modular jack. It is designed to be connected to the telephone network or premises wiring using compatible modular plugs and cabling which comply with the requirements of FCC Part 68 rules. The Ringer Equivalence Number, or REN, is used to determine the number of devices which may be connected to the telephone line. An excessive REN may cause the equipment to not ring in response to an incoming call. In most areas, the sum of the RENs of all equipment on a line should not exceed five (5.0). In the unlikely event that this equipment causes harm to the telephone network, the telephone company can temporarily disconnect your service. The telephone company will try to warn you in advance of any such disconnection, but if advance notice isn’t practical, it may disconnect the service first and notify you as soon as possible afterwards. In the event such a disconnection is deemed necessary, you will be advised of your right to file a complaint with the FCC. From time to time, the telephone company may make changes in its facilities, equipment, or operations which could affect the operation of this equipment. If this occurs, the telephone company is required to provide you with advance notice so you can make the modifications necessary to obtain uninterrupted service. There are no user serviceable components within this equipment. See Warranty flyer for repair or warranty information. It shall be unlawful for any person within the United States to use a computer or other electronic device to send any message via a telephone facsimile unless such message clearly contains, in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or individual sending the message and the telephone number of the sending machine or of such business, other entity, or individual. The telephone number provided may not be a 900 number or any other number for which charges exceed local or long distance transmission charges. Telephone facsimile machines manufactured on and after December 20, 1992, must clearly mark such identifying information on each transmitted message. Facsimile modem boards manufactured on and after December 13, 1995, must comply with the requirements of this section. This equipment cannot be used on public coin phone service provided by the telephone company. Connection to Party Line Service is subject to state tariffs. Contact your state public utility commission, public service commission, or corporation commission for more information. 38
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

Grandstream UCM6200 series Quick Installation Guide

Tipo
Quick Installation Guide