Danby DDR095BDPWDB El manual del propietario

Categoría
Deshumidificadores
Tipo
El manual del propietario
DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9
DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840
OWNER’S MANUAL
MANUEL DU PROPRIÉTAIRE
MANUAL DEL PROPIETARIO
DEHUMIDIFIER
Owner’s Manual...............................1 - 9
DÉSHUMIDIFICATEUR
Manuel du propriétaire.................10 - 18
DESHUMIDIFICADOR
Manual del propietario.................19 - 27
MODEL MODÈLE MODELO
DDR095BDPWDB
2018.01.24
Welcome
Welcome to the Danby family. We are proud of our quality products and we believe in
dependable service. We suggest that you read this owner’s manual before plugging in your new
appliance as it contains important operation information, safety information, troubleshooting and
maintenance tips to ensure the reliability and longevity of your appliance.
Visit www.Danby.com to access self service tools, FAQs and much more. For additional assistance
call 1-800-263-2629.
Note the information below; you will need this information to obtain service under warranty.
You must provide the original purchase receipt to validate your warranty and receive service.
Model Number: _________________________________________________
Serial Number: _________________________________________________
Date of Purchase: _______________________________________________
Need Help?
Before you call for service, here are a few things you can do to help us serve you better.
Read this owner’s manual:
It contains instructions to help you use and maintain your appliance properly.
If you receive a damaged appliance:
Immediately contact the retailer or builder that sold you the appliance.
Save time and money:
Check the troubleshooting section at the end of this manual before calling. This section
will help you solve common problems that may occur.
1-800-26- Danby
(1-800-263-2629)
1
SAFETY REQUIREMENTS
This appliance is not intended for use by persons
(including children) whose physical, sensory or
mental capabilities may be different or reduced,
or who lack experience or knowledge, unless such
persons receive supervision or training to operate
the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they
do not play with the appliance.
To avoid risk of electric shock, do not operate this
dehumidifi er in an area that is likely to accumulate
standing water. If this condition develops, disconnect
the power supply before stepping into the water.
Do not store or use combustible materials such as
gasoline or other fl ammable vapors or liquids in the
vicinity of this or any other appliance.
Do not insert fi ngers or other objects into grills or
openings in the appliance.
Do not cover or block the intake and exhaust
openings.
Do not operate the appliance without the fi lter
installed.
Do not operate the appliance near heat sources.
This appliance is intended for indoor, residential
applications only. Do not use this dehumidifi er
outdoors. Do not use this dehumidifi er for
commercial or industrial applications.
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding
reduces the risk of electrical shock by providing an
escape wire for the electrical current.
This appliance has a cord that has a grounding
wire with a 3-prong plug. The power cord must be
plugged into an outlet that is properly grounded.
If the outlet is a 2-prong wall outlet, it must be
replaced with a properly grounded 3-prong wall
outlet. The serial rating plate indicates the voltage
and frequency the appliance is designed for.
WARNING - Improper use of the grounding
plug can result in a risk of electric shock.
Consult a qualifi ed electrician or service agent
if the grounding instructions are not completely
understood, or if doubt exists as to whether the
appliance is properly grounded.
Do not connect the appliance to extension cords,
adapters or together with another appliance in the
same wall outlet.
Do not splice the power cord. Do not under any
circumstances cut or remove the third ground prong
from the power cord.
If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent or
similar qualifi ed person in order to avoid hazard.
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
2
SAVE THESE INSTRUCTIONS!
OPERATING INSTRUCTIONS
LOCATION
Place the dehumidifi er on a smooth, level fl oor
that is strong enough to support the appliance
with a full bucket of water.
To maintain ef ciency, operate the appliance
in an enclosed area. Keep nearby doors and
windows closed.
Maintain a minimum clearance of 20 cm (8
inches) on the sides and back of the appliance
and 40 cm (16 inches) on the top of the
appliance to allow for proper air circulation.
The recommended ambient operating
temperature is between 5°C (41°F) and 35°C
(95°F).
Do not force rollers to move over carpeting as
the appliance may tip over and spill water.
Any time the appliance is placed on its back or
side, it must be allowed to stand upright for 6
hours before plugging in to avoid damage to
internal components.
FEATURES
Front
1. Air Outlet
2. Control Panel
3. Handles (both sides)
4. Water Bucket
Back
1. Air Inlet
2. Continuous Drain Outlet
3. Power Cord Storage Band
4. Pump Drain Outlet
5. Power Cord
1
2
3
4
1
2
3
4
5
3
CONTROL PANEL
1. Continuous Mode Button and Indicator Light
Press this button to activate continuous mode.
This will run the dehumidifying function
continuously. The indicator light will turn on
when continuous mode is active.
2. Timer Button and Indicator Lights
Use this button to set the timer function.
3. Defrost Indicator Light
The defrost indicator light will illuminate
when frost has accumulated on the interior
of the appliance. This can indicate that
the ambient temperature is too cold. The
dehumidifying function will cease until the
frost has melted.
4. Full Bucket Indicator Light
The full bucket indicator light will illuminate
when the bucket is full of water. Empty the
bucket to resume regular functioning.
5. Display and Up and Down Arrows
The display will show the set humidity, the
ambient humidity or the timer function.
The up and down arrows can adjust the set
humidity or the timer setting.
The humidity can be set between 35-85% in
5% increments. For drier air, set the humidity
to a lower number. For damper air, set the
humidity to a higher number.
The ambient humidity display is accurate
within +/- 5%.
OPERATING INSTRUCTIONS
1
2 3 4
5
6
7 8 9
10
11
4
6. Power Button
Use this button to turn the appliance on or
off.
7. Pump Button and Indicator Light
Use this button to activate the drain pump.
The indicator light will illuminate when the
pump is active.
8. Smart Dehumidify Button and Indicator Light
Use this button to activate smart dehumidify
mode. Smart dehumidify will automatically
set the humidity and fan speed based on
the ambient temperature and humidity. The
indicator light will illuminate when comfort
mode is active.
9. Filter Button and Indicator Light
• The lter light will illuminate when the fi lter
needs to be cleaned. Press the fi lter button
once the fi lter has been cleaned to return to
regular functioning.
10. Fan Button and Indicator Light
Press this button to set the fan speed to low
or high. If the indicator light is off, the fan is
set to low speed. If the indicator light is on,
the fan is set to high speed.
11. Ionizer Mode Button and Indicator Light
Use this button to activate the ionizer
function. The indicator light will illuminate
when the ionizer is active.
OPERATING INSTRUCTIONS
5
TIMER FUNCTION
Auto On Function
1. Press the timer button until the auto on indicator
light illuminates.
2. Use the up and down arrows to select the
desired amount of time before the appliance
should turn on. The up and down arrows
will add or subtract 30 minutes of time up to
10 hours, then at 1 hour increments up to a
maximum of 24 hours.
3. The time selected will appear on the display
panel and will count down until the appliance
turns on.
Auto Off Function
1. Press the timer button until the auto off indicator
light illuminates.
2. Use the up and down arrows to select the
desired amount of time before the appliance
should turn on. The up and down arrows
will add or subtract 30 minutes of time up to
10 hours, then at 1 hour increments up to a
maximum of 24 hours.
3. The time selected will appear on the display
panel and will count down until the appliance
turns off.
Using Auto On and Auto Off Simultaneously
The auto on and auto off functions can be used at
the same time by fi rst setting one and then the other.
Both indicator lights will illuminate and the display
will count down to the appliance either turning off
or on, whichever function was set fi rst.
Note: The timer will not cycle the appliance on and
off indefi nitely. The auto on and auto off timers will
function one time and then the appliance will return
to regular functioning.
Turning the appliance off, pressing the default
button on the remote or unplugging the appliance
will clear all memory settings, including the timer.
IONIZER FUNCTION
The ionizer function is a form of air purifi cation that
negatively charges the air. Dust particles, pollen
and other particles in the air cannot pass through
the fi lter when they are negatively charged. This
ensures that the maximum amount of dust and dirt
are removed from the air. Additionally, the ionizer
function helps to remove unwanted odors from the
air.
WATER REMOVAL
There are three ways to remove collected water
from the appliance.
1. Water Bucket
The dehumidifi er will automatically collect
condensed water in the water bucket. When the
bucket is full, the compressor and fan will turn off
and the full bucket indicator light will turn on. The
display will show “P2”.
To empty the bucket, gently remove it from the
appliance by gripping both sides and pulling
outward. Be cautious when removing the bucket, it
will be full and can be heavy.
Do not place the water bucket directly on the fl oor.
The bottom of the bucket is uneven and it will fall
over and spill water.
Empty the bucket and replace it in the appliance.
The dehumidifi er will not function without the bucket
installed.
Note: When removing the bucket, the pump arm
for the drain pump may fall down. It must be gently
pushed upward back into the correct position before
replacing the bucket.
OPERATING INSTRUCTIONS
6
WATER REMOVAL
2. Continuous Drain
Water can be removed from the appliance using the
continuous drain and a standard garden hose (not
provided).
Before using any automatic drain functions,
check that all drain ports are clean and free of
debris. There is one drain port inside the bucket
compartment of the appliance, remove the bucket
to see it. There is one drain port on the back of the
appliance where the drain hose attaches. All drain
ports should be cleaned with a pipe cleaner prior to
use.
Note: Do not clean the drain ports with anything
more rigid than a pipe cleaner as this can damage
the appliance.
Note: If the drain ports are clogged or dirty it
can cause water to leak from the bottom of the
appliance.
Remove the cover from the continuous drain outlet
and attach the female threaded end of the garden
hose to the back of the appliance. Direct the other
end of the garden hose to a bucket or fl oor drain.
Ensure that the garden hose is not bent and goes
straight down from the back of the appliance. The
continuous drain is only activated by gravity so any
bends or upward motion in the hose will stop the
water from draining.
The garden hose should be cut so that it is no more
than 1.8 m (6 feet) long. If the drain hose is too
long water may not drain completely which can
lead to stagnant water and mildew build up inside
the hose.
WATER REMOVAL
3. Pump Drain
If the continuous drain is inconvenient, water can be
removed from the appliance using the pump drain.
When using the pump, the appliance will fi rst ll the
bucket with water and then the pump arm will pump
water from the bucket through the drain and out the
hose.
Remove the cover from the pump drain outlet and
attach the provided drain hose. Direct the other end
of the hose to a drain. Press the pump button to
activate the pump function. When the bucket is full,
the pump will begin to work.
Ensure that the drain hose is not bent, this can stop
the water from draining correctly and overwork the
pump.
Do not connect the provided hose together with
another hose. The maximum length of the pump
drain hose should be no more than 4.6 m (15 feet).
If the drain hose is too long water may not drain
completely which can lead to stagnant water and
mildew build up inside the hose.
When using the pump drain, the water bucket
should be emptied every few days to ensure that the
water in the bucket does not become stagnant or
grow mildew.
CARE & MAINTENANCE
AIR FILTER
The air fi lter should be cleaned approximately every
2 weeks. The air fi lter may require more frequent
cleaning if there is signifi cant dander or fur in the
air.
Approximately every two weeks, the fi lter indicator
light on the control panel will illuminate as a
reminder to clean the fi lter. Follow the steps below
to clean the fi lter and return the appliance to normal
functioning.
1. The air fi lter is located behind the rear intake
grill. To remove the air fi lter, grasp the fi lter tab
on the bottom of the grill and slide it downward.
2. Use a vacuum cleaner with a soft brush
attachment to remove any large debris or dust
build up from the air fi lter.
3. Wash the fi lter in lukewarm, soapy water, below
40°C (104°F), or use a neutral cleaning agent.
4. Rinse the fi lter with clean water and dry
thoroughly before reinstalling in the appliance.
5. Press the fi lter button on the control panel to
resume normal functioning.
Note: Do not operate the appliance without the air
lter installed.
ERROR CODES
If the display panel shows any of the below error
codes, unplug the appliance, let it stand for 5-10
minutes and then plug it back in. If the error
persists, call for service.
AS - Humidity sensor error
ES - Temperature sensor error
P2 - Full bucket
E3 - Sensor malfunction
Eb - Bucket removed or not in the correct position
EC - Cooling system error or sensor error
CLEANING
To avoid possible electric shock, ensure that the
appliance is unplugged before performing any
cleaning or maintenance.
The outside of the appliance can be wiped clean
with a soft cloth or with a lukewarm, damp cloth if
necessary.
Do not use gasoline, benzene, thinner or any
other chemicals to clean this appliance as these
substances can cause damage to the fi nish and
deformation of plastic parts.
Never pour water directly onto the appliance as this
will cause deterioration of electrical components
and wiring insulation.
Ensure that the drain ports on the interior of the
appliance and the drain ports on the back of the
appliance are free of dirt and calcium build up.
END OF SEASON CARE
Before removing the appliance from service for the
year, operate the appliance on high fan mode for
half a day to ensure that the inside of the appliance
is dry. This will help avoid the growth of mold or
mildew inside the appliance. Ensure the fi lter is
clean and dry. Store the appliance covered in a dry
location.
DISPOSAL
This appliance may not be treated as regular
household waste, it should be taken to the
appropriate waste collection point for recycling of
electrical components. Check for local regulatory
compliance regarding approved and safe disposal
of this appliance.
7
TROUBLESHOOTING
Danby Consumer Care: 1-800-263-2629
Hours of operation:
Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time
Friday 8:30 am - 4:00 pm Eastern Standard Time
Information in this manual is subject to change without notice.
PROBLEM POSSIBLE CAUSE
Appliance will not operate Plug is not fully inserted into the wall outlet
Blown fuse or circuit breaker
Ambient humidity is lower than the set humidity
Bucket is full or is not in the proper position
Insuffi cient dehumidifying • Air lter is dirty
Blocked air fl ow
Appliance size is too small for application
Ambient humidity is lower than the set humidity
Noise • Air lter is dirty
Bucket is not in proper position
Floor surface is not level
Odors Formation of mold or mildew on internal wet surfaces
Place an algaecide tablet in the water bucket
Water on fl oor Hose connection is loose
Drain cover has been removed
Frost build up When ambient temperature is below 5°C (41°F) frost may form
Switch the appliance to fan only mode until the frost melts
8
LIMITED IN-HOME APPLIANCE WARRANTY
This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating
conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter
“Danby”) or by an authorized distributor of Danby, and is non-transferable.
TERMS OF WARRANTY
Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.
First Year
During the rst twelve (12) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor’s
option, at no charge to the ORIGINAL purchaser.
To obtain
Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any app liance
Service
requiring service outside the limited boundaries of “In Home Service” , it will be the consumer’s responsibility to transport the appliance (at
their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Serv ice” below.
Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service
must be performed by a qualied service technician.
If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial appli cation, all
obligations of Danby under this warranty shall be void.
Boundaries of
If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be
In Home Service
delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualied and certif ied for
warranty service by Danby. Transportation charges to and from the service location are not protected by this warranty and are t he
responsibility of the purchaser.
Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other c ontents of this appliance, whether due
to any defect of the appliance, or its use, whether proper or improper.
EXCLUSIONS
Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied, m ade or intended by Danby or its
authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditio ns, representations or guarantees
under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall no t be responsible for any damages
to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o f the unit and by the purchase of
the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or propert y caused by the unit.
GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:
1) Power failure.
2) Damage in transit or when moving the appliance.
3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.
4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating con ditions
(extremely high or low room temperature).
5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, oods etc.
7) Service calls resulting in customer education.
8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out door application).
Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our
AUTHORIZED SERVICE DEPOT.
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone: (519) 837-0920 FAX: (519) 837-0449
Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840
Telephone: (419) 425-8627 FAX: (419) 425-8629
04/09
1-800-263-2629
Warranty Service
In-home
Transportation charges to and from the service location are not protected by this warranty and are the responsibility of the purchaser.
During the first twenty four (24) months, any functional parts of this product found to be defective, will be repaired
or replaced, at warrantor’s option, at no charge to the original purchaser.
Contact the dealer where the unit was purchased, or contact the nearest authorized Danby service depot, where
service must be performed by a qualified service technician. If service is performed on the unit by anyone other
than an authorized service depot, all obligations of Danby under this warranty shall be void.
It is the responsibility of the purchaser to transport the appliance to the nearest authorized service depot.
First 24 months
To obtain service
LIMITED “CARRY IN” WARRANTY
This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used
under the normal operating conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby
Products Inc. (U.S.A.) (hereafter “Danby”) or by an authorized distributor of Danby, and is non-transferable.
TERMS OF WARRANTY
Plastic parts are warranted for thirty (30) days from the date of purchase, with no extensions provided.
Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other
contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.
EXCLUSIONS
Save as herein provided, by Danby, there are no other warranties, conditions, representations or guarantees, express or implied, made
or intended by Danby or its authorized distributors and all other warranties, conditions, representations or guarantees, including any
warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statute is hereby expressly
excluded. Save as herein provided, Danby shall not be responsible for any damages to persons or property, including the unit itself,
howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the
purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or property caused by
the unit.
GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:
1) Power failure.
2) Damage in transit or when moving the appliance.
3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.
4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating
conditions (ie. extremely high or low room temperature).
5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.
7) Service calls resulting in customer education.
8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for outdoor
application, including but not limited to: garages, patios, porches or anywhere that is not properly insulated or climate controlled).
Proof of purchase date will be required for warranty claims; retain bills of sale. In the event that warranty service is required, present
the proof of purchase to our authorized service depot.
Warranty Service
Carry In
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone: (519) 837-0920 FAX: (519) 837-0449
Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840
Telephone: (419) 425-8627 FAX: (419) 425-8629
1-800-263-2629
04/17
10
Bienvenue
Bienvenue à la famille Danby. Nous sommes fi ers de la qualité de nos produits et nous croyons
en le service fi able. Nous vous suggérons de lire ce manual d’utilisation avant de brancher
votre nouvel appareil car il contient des informations inportantes sur l’utilisation, la sécurité, le
dépannage et la maintenance, afi n d’assurer la fi abilité et la longévité de votre appareil.
Visitez www.Danby.com pour accéder aux outils d’autoservice, aux FAQ et bien plus encore. Pour
obtenir de l’aide supplémentaire, composez 1-800-263-2629.
Notez les informations ci-dessous; Vous aurez besoin de cette information pour obtenir un
service sous garantie.
Vous devez fournir le reçu d’achat original pour valider votre garantie et recevoir le service.
Numéro de modèle: _____________________________________________
Numéro de serie: _______________________________________________
Date d’achat: __________________________________________________
Besoin d’assistance?
Avant d’appeler pour service, voici quelques choses que vous pouvez faire pour nous
aider à mieux vous servir.
Lire ce manuel du propriétaire:
Il contient des instructions pour vous aider à utiliser et à maintenir votre appareil
correctement.
Si vous recevez un appareil endommagé:
Contactez immédiatement le revendeur ou l’entrepreneur qui vous a vendu l’appareil.
Gagnez du temps et de l’argent:
Avant d’appeler pour service, consultez la section de dépannage à la fi n de ce manuel.
Cette section vous aidera à résoudre les problèmes courants pouvant survenir.
1-800-26- Danby
(1-800-263-2629)
EXIGENCES DE SÉCURITÉ
Cet appareil n’est pas destiné à être utilisé par
des personnes (y compris des enfants) dont les
capacités physiques, sensorielles ou mentales
peuvent être différentes ou réduites, ou qui n’ont
pas d’expérience ou de connaissances, à moins
que ces personnes ne soient surveillées ou formées
pour faire fonctionner l’appareil par une personne
responsable de leur sécurité.
Les enfants devraient être surveillés pour s’assurer
qu’ils ne jouent pas avec l’appareil.
Pour éviter tout risque de choc électrique, ne
pas utiliser ce déshumidifi cateur dans une zone
susceptible d’accumuler de l’eau stagnante. Si cette
condition se développe, débranchez l’alimentation
avant de pénétrer dans l’eau.
Ne pas stocker ou utiliser des matériaux
combustibles tels que de l’essence ou d’autres
vapeurs ou liquides infl ammables à proximité de ce
ou d’un autre appareil.
Ne pas insérer de doigts ou d’autres objets dans
des grilles ou des ouvertures dans l’appareil.
Ne pas couvrir ou bloquer les ouvertures
d’admission et d’échappement.
N’utilisez pas l’appareil sans le fi ltre installé.
N’utilisez pas l’appareil à proximité de sources de
chaleur.
Cet appareil est destiné uniquement à des
applications résidentielles et intérieures. N’utilisez
pas ce déshumidifi cateur à l’extérieur. N’utilisez
pas ce déshumidifi cateur pour des applications
commerciales ou industrielles.
INSTRUCTIONS DE MISE À LA TERRE
Cet appareil doit être mis à la terre. La mise à
la terre réduit le risque de choc électrique en
fournissant un câble d’échappement pour le courant
électrique.
Cet appareil possède un cordon doté d’un fi l de
mise à la terre avec une fi che à 3 broches. Le
cordon d’alimentation doit être branché sur une
prise correctement mise à la terre. Si la sortie
est une prise murale à 2 broches, elle doit être
remplacée par une prise murale à 3 broches
correctement mise à la terre. La plaque signalétique
en série indique la tension et la fréquence
auxquelles l’appareil est conçu.
AVERTISSEMENT - L’utilisation incorrecte de la
che de mise à la terre peut entraîner un risque
d’électrocution. Consultez un électricien qualifi é
ou un agent de service si les instructions de mise
à la terre ne sont pas complètement comprises, ou
s’il existe un doute quant à savoir si l’appareil est
correctement mis à la terre.
Ne branchez pas l’appareil à des rallonges, des
adaptateurs ou à un autre appareil dans la même
prise murale.
Ne pas épisser le cordon d’alimentation. Ne coupez
ou retirez en aucun cas la troisième broche du
cordon d’alimentation.
Si le cordon d’alimentation est endommagé, il
doit être remplacé par le fabricant, son agent de
maintenance ou une personne qualifi ée similaire
afi n d’éviter tout risque.
Informations importantes de sécurité
LIRE ET SUIVRE TOUTES LES INSTRUCTIONS DE SÉCURITÉ
11
GARDEZ CES INSTRUCTIONS!
INSTRUCTIONS D’UTILISATION
EMPLACEMENT
Placez le déshumidifi cateur sur un plancher
lisse et plat qui est assez solide pour supporter
l’appareil avec un seau complet d’eau.
Pour maintenir l’effi cacité, faites fonctionner
l’appareil dans une zone fermée. Gardez les
portes et les fenêtres fermées à proximité.
Maintenir un dégagement minimum de 20 cm
(8 pouces) sur les côtés et l’arrière de l’appareil
et 40 cm (16 pouces) sur le dessus de l’appareil
pour permettre une circulation d’air appropriée.
La température de fonctionnement ambiante
recommandée est comprise entre 5°C (41°F) et
35°C (95°F).
Ne pas forcer les rouleaux à se déplacer sur
les moquettes car l’appareil peut basculer et
renverser de l’eau.
Chaque fois que l’appareil est placé sur son dos
ou sur son côté, il doit pouvoir se tenir debout
pendant 6 heures avant de brancher pour éviter
d’endommager les composants internes.
CARACTÉRISTIQUES
Avant
1. Sortie d’air
2. Panneau de contrôle
3. Poignées (des deux côtés)
4. Seau d’eau
Arrière
1. Entrée d’air
2. Prise de vidange continue
3. Bande de stockage du cordon d’alimentation
4. Sortie de drain de pompe
5. Cordon d’alimentation
1
2
3
4
1
2
3
4
5
12
PANNEAU DE CONTRÔLE
1. Bouton de mode continu et voyant lumineux
Appuyez sur ce bouton pour activer le
mode continu. Cela entraînera en continu
la fonction de déshumidifi cation. Le voyant
s’allume lorsque le mode continu est activé.
2. Bouton de minuterie et voyants lumineux
Utilisez ce bouton pour régler la fonction de
minuterie.
3. Voyant lumineux de dégivrage
Le témoin de dégivrage s’allume lorsque
le givre s’est accumulé à l’intérieur de
l’appareil. Cela peut indiquer que la
température ambiante est trop froide. La
fonction de déshumidifi cation cessera
jusqu’à ce que le givre ait fondu.
4. Voyant lumineux de seau plein
Le voyant du seau complet s’allume lorsque
le seau est plein d’eau. Videz le seau pour
reprendre le fonctionnement régulier.
5. Écran d’affi chage et fl èches haut et bas
• L’affi chage indique l’humidité défi nie,
l’humidité ambiante ou la fonction de
minuterie.
Les fl èches haut et bas peuvent ajuster
l’humidité défi nie ou le réglage de la
minuterie.
L’humidité peut être réglée entre 35-85%
par incréments de 5%. Pour un air plus sec,
régler l’humidité à un nombre inférieur.
Pour l’air amortisseur, régler l’humidité à un
nombre plus élevé.
• L’affi chage de l’humidité ambiante est précis
entre +/- 5%.
INSTRUCTIONS D’UTILISATION
13
6. Bouton d’alimentation
Utilisez ce bouton pour allumer ou éteindre
l’appareil.
7. Bouton de pompe et voyant lumineux
Utilisez ce bouton pour activer la pompe
de vidange. Le témoin lumineux s’allume
lorsque la pompe est active.
8. Déshumidifi cation intelligente et voyant
lumineux
Utilisez ce bouton pour activer le mode
de déshumidifi cation intelligent. Le
mode de déshumidifi cation intelligent
défi nit automatiquement l’humidité et la
vitesse du ventilateur en fonction de la
température ambiante et de l’humidité.
Le témoin lumineux s’allume lorsque le
déshumidifi cation intelligent est activé.
9. Bouton de fi ltre et voyant lumineux
La lumière du fi ltre s’allume lorsque le fi ltre
doit être nettoyé. Appuyez sur le bouton de
ltre une fois que le fi ltre a été nettoyé pour
revenir au fonctionnement régulier.
10. Bouton de ventilateur et voyant lumineux
Appuyez sur cette touche pour régler la
vitesse du ventilateur à faible ou à haute. Si
le témoin lumineux est éteint, le ventilateur
est réglé à faible vitesse. Si le témoin
lumineux est allumé, le ventilateur est réglé
sur une vitesse élevée.
11. Bouton de mode Ioniseur et voyant lumineux
Utilisez ce bouton pour activer la fonction
ioniseur. Le voyant s’allume lorsque l’ioniseur
est actif.
1
2 3 4
5
6
7 8 9
10
11
INSTRUCTIONS D’UTILISATION
14
ELIMINATION D’EAU
Il existe trois façons d’éliminer l’eau collectée de
l’appareil.
1. Seau d’eau
Le déshumidifi cateur collectera automatiquement
l’eau condensée dans le seau d’eau. Lorsque le seau
est plein, le compresseur et le ventilateur s’éteignent
et le voyant du seau complet s’allume. L’écran
affi che “P2”.
Pour vider le seau, retirez-le doucement de
l’appareil en agrippant les deux côtés et en tirant
vers l’extérieur. Soyez prudent lors de l’enlèvement
du seau, il sera plein et peut être lourd.
Ne placez pas le seau à eau directement sur le sol.
Le fond du seau est inégal et il tombera et déversera
de l’eau.
Videz le seau et remettez-le dans l’appareil. Le
déshumidifi cateur ne fonctionnera pas sans le godet
installé.
Remarque: Lorsque vous retirez le seau, le bras de
pompe pour la pompe de vidange peut tomber. Il
doit être repoussé doucement vers le haut dans la
position correcte avant de remplacer le seau.
FONCTION DE MINUTERIE
Fonction d’activation automatique
1. Appuyez sur le bouton de la minuterie jusqu’à
ce que le voyant d’activation automatique
s’allume.
2. Utilisez les fl èches haut et bas pour sélectionner
la durée souhaitée avant que l’appareil ne
s’allume. Les fl èches haut et bas ajouteront ou
soustracteront 30 minutes de temps jusqu’à
10 heures, puis à des incréments de 1 heure
jusqu’à un maximum de 24 heures.
3. L’heure sélectionnée apparaîtra sur le panneau
d’affi chage et débutera jusqu’à ce que
l’appareil s’allume.
Fonction de désactivation automatique
1. Appuyez sur le bouton de la minuterie jusqu’à
ce que le témoin de désactivation automatique
s’allume.
2. Utilisez les fl èches haut et bas pour sélectionner
la durée souhaitée avant que l’appareil ne
s’allume. Les fl èches haut et bas ajouteront ou
soustracteront 30 minutes de temps jusqu’à
10 heures, puis à des incréments de 1 heure
jusqu’à un maximum de 24 heures.
3. L’heure sélectionnée apparaîtra sur le panneau
d’affi chage et débutera jusqu’à ce que
l’appareil s’éteigne.
Utilisation automatique activée et désactivée
simultanément
Les fonctions d’activation automatique et de
désactivation automatique peuvent être utilisées
simultanément en réglant d’abord l’une puis l’autre.
Les deux voyants lumineux s’allument et l’affi chage
décompte vers le bas pour que l’appareil soit éteint
ou allumé, quelle que soit la fonction réglée en
premier.
Remarque: La minuterie ne met pas l’appareil sous
tension et hors tension indéfi niment. Les minuteries
auto activées et désactivées fonctionneront une fois,
puis l’appareil revient à un fonctionnement régulier.
Si vous éteignez l’appareil, appuyez sur le bouton
par défaut de la télécommande ou débranchez
l’appareil pour effacer tous les paramètres de la
mémoire, y compris la minuterie.
FONCTION IONISEUR
La fonction ioniseur est une forme de purifi cation
de l’air qui charge négativement l’air. Les particules
de poussière, le pollen et d’autres particules dans
l’air ne peuvent pas traverser le fi ltre lorsqu’ils sont
chargés négativement. Cela garantit que la quantité
maximale de poussière et de saleté est éliminée de
l’air. En outre, la fonction ioniseur aide à éliminer
les odeurs indésirables de l’air.
INSTRUCTIONS D’UTILISATION
15
ELIMINATION D’EAU
2. Drain continu
L’eau peut être retirée de l’appareil à l’aide du
drain continu et d’un tuyau d’arrosage standard
(non fourni).
Avant d’utiliser des fonctions de vidange
automatique, vérifi ez que tous les orifi ces de
vidange sont propres et exempts de débris. Il y a un
orifi ce de vidange dans le compartiment à godets
de l’appareil, retirez le seau pour le voir. Il y a un
port de vidange à l’arrière de l’appareil où le tuyau
de vidange se fi xe. Tous les orifi ces de vidange
doivent être nettoyés avec un cure-pipe avant
utilisation.
Remarque: Ne nettoyez pas les orifi ces de vidange
avec un élément plus rigide qu’un nettoyeur
de canalisation car cela pourrait endommager
l’appareil.
Remarque: Si les orifi ces de vidange sont obstrués
ou sales, l’eau risque de fuir du bas de l’appareil.
Retirez le couvercle de la sortie de vidange
continue et fi xez l’extrémité fi letée femelle du tuyau
d’arrosage à l’arrière de l’appareil. Dirigez l’autre
extrémité du tuyau d’arrosage vers un seau ou un
drain de plancher.
Assurez-vous que le tuyau d’arrosage n’est pas plié
et descend droit de l’arrière de l’appareil. Le drain
continu n’est activé que par gravité, de sorte que les
virages ou le mouvement vers le haut dans le tuyau
empêchent l’évacuation de l’eau.
Le tuyau d’arrosage doit être coupé afi n qu’il
ne dépasse pas 1.8 m (6 pieds) de long. Si le
tuyau de vidange est trop long, l’eau peut ne pas
s’effondrer complètement, ce qui peut entraîner une
accumulation d’eau stagnante et de la moisissure
dans le tuyau.
ELIMINATION D’EAU
3. Vidange de pompe
Si le drain continu est gênant, l’eau peut être retirée
de l’appareil à l’aide du drain de la pompe.
Lors de l’utilisation de la pompe, l’appareil remplit
d’abord le seau avec de l’eau, puis le bras de
pompe pompe l’eau du seau dans le drain et le
tuyau.
Retirez le couvercle de la sortie de vidange de la
pompe et fi xez le tuyau de vidange fourni. Dirigez
l’autre extrémité du tuyau vers un drain. Appuyez
sur le bouton de la pompe pour activer la fonction
de la pompe. Lorsque le seau est plein, la pompe
commencera à fonctionner.
Assurez-vous que le tuyau de vidange n’est
pas plié, cela peut empêcher l’eau de s’écouler
correctement et de surcharger la pompe.
Ne raccordez pas le tuyau fourni avec un autre
tuyau. La longueur maximale du tuyau de vidange
de la pompe ne doit pas dépasser 4.6 m (15
pieds). Si le tuyau de vidange est trop long, l’eau
peut ne pas s’effondrer complètement, ce qui peut
entraîner une accumulation d’eau stagnante et de la
moisissure dans le tuyau.
Lorsque vous utilisez le drain de la pompe, le godet
d’eau doit être vidé tous les jours pour s’assurer
que l’eau dans le seau ne stagne pas ou que la
moisissure augmente.
SOINS ET MAINTENANCE
FILTRE À AIR
Le fi ltre à air doit être nettoyé environ toutes les 2
semaines. Le fi ltre à air peut nécessiter un nettoyage
plus fréquent si il y a un choc important ou de la
fourrure dans l’air.
Environ toutes les deux semaines, le voyant du fi ltre
sur le panneau de commande s’allume comme un
rappel pour nettoyer le fi ltre. Suivez les étapes ci-
dessous pour nettoyer le fi ltre et retournez l’appareil
au fonctionnement normal.
1. Le ltre à air est situé derrière la grille
d’admission arrière. Pour retirer le fi ltre à air,
saisissez la languette du fi ltre au bas de la grille
et faites-la glisser vers le bas.
2. Utilisez un aspirateur avec une brosse douce
pour enlever les grands débris ou la poussière
du fi ltre à air.
3. Lavez le fi ltre dans de l’eau tiède savonneuse,
inférieure à 40°C (104°F), ou utilisez un agent
de nettoyage neutre.
4. Rincez le fi ltre avec de l’eau propre et séchez
bien avant de le réinstaller dans l’appareil.
5. Appuyez sur le bouton de fi ltrage sur le
panneau de commande pour reprendre le
fonctionnement normal.
Remarque: Ne faites pas fonctionner l’appareil sans
le fi ltre à air installé.
CODES D’ERREUR
Si le panneau d’affi chage af che l’un des codes
d’erreur ci-dessous, débranchez l’appareil, laissez
reposer pendant 5 à 10 minutes, puis rallumez-le.
Si l’erreur persiste, appelez pour le service.
AS - Erreur du capteur d’humidité
ES - Erreur du capteur de température
P2 - Seau plein
E3 - Dysfonctionnement du capteur
Eb - Seau enlevé ou non dans la position correcte
EC - Erreur du système de refroidissement ou erreur
du capteur
NETTOYAGE
Pour éviter tout risque d’électrocution, assurez-vous
que l’appareil est débranché avant d’effectuer un
nettoyage ou une maintenance.
L’extérieur de l’appareil peut être nettoyé avec un
chiffon doux ou avec un chiffon tiède et humide si
nécessaire.
N’utilisez pas d’essence, de benzène, de diluant
ou d’autres produits chimiques pour nettoyer cet
appareil car ces substances peuvent endommager
l’enduit et la déformation des pièces en plastique.
Ne versez jamais d’eau directement sur l’appareil,
car cela entraînera une détérioration des
composants électriques et de l’isolation des câbles.
Assurez-vous que les orifi ces de vidange à
l’intérieur de l’appareil et les orifi ces de vidange
à l’arrière de l’appareil sont exempts de saleté et
d’accumulation de calcium.
SOINS POUR LA FIN DE SAISON
Avant de retirer l’appareil du service pour l’année,
faites fonctionner l’appareil sur le mode ventilateur
élevé pendant une demi-journée pour vous assurer
que l’intérieur de l’appareil est sec. Cela aidera
à éviter la croissance de la moisissure ou de la
moisissure à l’intérieur de l’appareil. Assurez-vous
que le fi ltre est propre et sec. Rangez l’appareil
dans un endroit sec.
ÉLIMINATION
Cet appareil ne doit pas être considéré comme un
ordures ménagères, mais il doit être pris au point
approprié de collecte des déchets pour le recyclage
des composants électriques. Vérifi ez la conformité
réglementaire locale concernant l’élimination
approuvée et sûre de cet appareil.
16
DÉPANNAGE
PROBLÈME CAUSE POSSIBLE
L’appareil ne fonctionnera pas • La che n’est pas complètement insérée dans la prise murale
Fusible souffl é ou disjoncteur
L’humidité ambiante est inférieure à l’humidité défi nie
Seau est plein ou pas dans la bonne position
Déshumidifi cation insuf sante • Le ltre à air est sale
Flux d’air bloqué
La taille de l’appareil est trop petite pour l’application
L’humidité ambiante est inférieure à l’humidité défi nie
Bruit • Le ltre à air est sale
Seau n’est pas en bonne position
La surface du plancher n’est pas de niveau
Odeurs Formation de moisissure sur des surfaces intérieures humides
Placer un comprimé d’algaïcide dans le seau à eau
L’eau sur le sol Le raccord du tuyau est desserré
Le couvercle de drainage a été retiré
Accumulation de givre Lorsque la température ambiante est inférieure à 5°C (41°F), la
gelée peut se former
Mettez l’appareil en mode ventilateur uniquement jusqu’à ce que
le givre fond
17
Danby soins du consommateur: 1-800-263-2629
Heures d’ouverture:
Lundi à Jeudi 8 h 30 à 18 h, heure normale de l’Est
Vendredi de 8 h 30 à 16 h, heure normale de l’Est
Les informations contenues dans ce manuel sont sujettes à modifi cation sans préavis.
LIMITED IN-HOME APPLIANCE WARRANTY
This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating
conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter
“Danby”) or by an authorized distributor of Danby, and is non-transferable.
TERMS OF WARRANTY
Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.
First Year
During the rst twelve (12) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor’s
option, at no charge to the ORIGINAL purchaser.
To obtain
Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any app liance
Service
requiring service outside the limited boundaries of “In Home Service” , it will be the consumer’s responsibility to transport the appliance (at
their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Serv ice” below.
Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service
must be performed by a qualied service technician.
If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial appli cation, all
obligations of Danby under this warranty shall be void.
Boundaries of
If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be
In Home Service
delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualied and certif ied for
warranty service by Danby. Transportation charges to and from the service location are not protected by this warranty and are t he
responsibility of the purchaser.
Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other c ontents of this appliance, whether due
to any defect of the appliance, or its use, whether proper or improper.
EXCLUSIONS
Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied, m ade or intended by Danby or its
authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditio ns, representations or guarantees
under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall no t be responsible for any damages
to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o f the unit and by the purchase of
the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or propert y caused by the unit.
GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:
1) Power failure.
2) Damage in transit or when moving the appliance.
3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.
4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating con ditions
(extremely high or low room temperature).
5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, oods etc.
7) Service calls resulting in customer education.
8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out door application).
Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our
AUTHORIZED SERVICE DEPOT.
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone: (519) 837-0920 FAX: (519) 837-0449
Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840
Telephone: (419) 425-8627 FAX: (419) 425-8629
04/09
1-800-263-2629
Warranty Service
In-home
Les frais de transport entre votre domicile et le lieu de l'entretien ne sont pas couverts par la présente garantie et doivent être
acquittés par l'acheteur.
Pendant les premiers vingt quatre (24) mois, toutes les pièces fonctionnelles de ce produit qui s’avèrent
défectueuses seront réparées ou remplacées, selon le choix du garant, sans frais à l’acheteur initial.
Contactez le revendeur où l'appareil a été acheté ou contactez le dépôt de service Danby autorisé le plus
proche, où le service doit être effectué par un technicien de service qualifié. Si le service est effectué sur
l'appareil par une personne autre qu'un dépôt de service autorisé, toutes les obligations de Danby en vertu de
cette garantie seront annulées.
Il est de la responsabilité de l'acheteur de transporter l'appareil vers le dépôt de service agréé le plus proche.
Premiers 24 mois
Pour obtenir un
service
GARANTIE LIMITÉE “EN ATELIER”
Cet appareil de qualité est garanti exempt de tout vice de matière première et de fabrication, s’il est utilisé dans les conditions normales
recommandées par le fabricant.
Cette garantie n’est offerte qu’à l’acheteur initial de l’appareil vendu par Danby Products Limited (Canada) ou Danby Products Inc.
(E.- U.A.) (ci-après « Danby ») ou par l’un des ses distributeurs agréés et elle ne peut être transférée.
CONDITIONS
Les pièces en plastique sont garanties pendant trente (30) jours seulement à partir de la date de l’achat, sans aucune prolongation
prévue.
Aucune partie de la garantie ne prévoit implicitement que le fabricant sera tenu responsable des dommages subis par les aliments ou
d’autres types de contenu, qu’ils soient causés par la défectuosité de l’appareil ou par son usage adéquat ou inadéquat.
EXCLUSIONS
En vertu de la présente, il n’existe aucune autre garantie, condition ou représentation, qu’elle soit exprimée ou tacite, de façon
manifeste ou intentionnelle, par Danby ou ses distributeurs agréés. De même, sont exclues toutes les autres garanties, conditions ou
représentations, y compris les garanties, conditions ou représentations en vertu de toute loi régissant la vente de produits ou de toute
autre législation ou règlement semblables. En vertu de la présente, Danby ne peut être tenue responsable en cas de blessures
corporelles ou des dégâts matériels, y compris à l’appareil, quelle qu’en soit les causes. Danby ne peut pas être tenue responsable
des dommages indirects dus au fonctionnement défectueux de l’appareil. En achetant l’appareil, l’acheteur accepte de mettre à
couvert et de dégager Danby de toute responsabilité en cas de réclamation pour toute blessure corporelle ou tout dégât matériel
causé par cet appareil.
CONDITIONS GÉNÉRALES
La garantie ou assurance ci-dessus ne s’applique pas si les dégâts ou réparations sont dus aux cas suivants:
1) Panne de courant.
2) Dommage subis pendant le transport ou le déplacement de l’appareil.
3) Alimentation électrique incorrecte (tension faible, câblage défectueux, fusibles incorrects).
4) Accident, modification, emploi abusif ou incorrect de l’appareil tel qu'une circulation d'air inadéquate dans la pièce ou des
conditions de fonctionnement anormales (température extrêmement élevée ou basse).
5) Utilisation dans un but commercial ou industriel (à savoir, si l'appareil n'est pas installé dans un domicile résidentiel).
6) Incendie, dommages causés par l’eau, vol, guerre, émeute, hostilités, cas de force majeure (ouragan, inondation, etc.).
7) Visites d’un technicien pour expliquer le fonctionnement de l’appareil au propriétaire.
8) Installation inappropriée (par exemple, encastrement d'un appareil autoportant, ou utilisation extérieure d'un appareil non conçu à
cet effet, y compris, mais sans s'y limiter: les garages, les patios, les porches ou ailleurs qui ne sont pas correctement isolés ou
climatisés).
La preuve de la date d'achat sera requise pour les réclamations de garantie; Conserver les factures de vente. Dans le cas où un
service de garantie est requis, présentez la preuve d'achat à notre dépôt de service agréé.
Service sous garantie
En Atelier
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Téléphone : (519) 837-0920 Télécopieur: (519) 837-0449
Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840
Téléphone: (419) 425-8627 Télécopieur: (419) 425-8629
1-800-263-2629
04/17
1-800-26- Danby
(1-800-263-2629)
Bienvenido
Bienvenido a la familia Danby. Estamos orgullosos de nuestros productos de calidad y creemos en
un servicio confi able. Sugerimos que lea este manual del propietario antes de conectar el nuevo
aparato ya que contiene información importante sobre la operación, información de seguridad,
solución de problemas y consejos de mantenimiento para garantizar la fi abilidad y longevidad de
su electrodoméstico.
Visite www.Danby.com para acceder a herramientas de autoservicio, preguntas frecuentes y
mucho más. Para asistencia adicional, llame al 1-800-263-2629.
Tenga en cuenta la información siguiente; Necesitará esta información para obtener un servicio
bajo garantía.
Debe proporcionar el recibo de compra original para validar su garantía y recibir servicio.
Número de modelo: _____________________________________________
Número de serie: _______________________________________________
Fecha de compra: _______________________________________________
Necesitas ayuda?
Antes de llamar al servicio, aquí hay algunas cosas que puede hacer para ayudarnos a
servirle mejor.
Lea este manual del propietario:
Contiene instrucciones para ayudarle a usar y mantener su aparato correctamente.
Si recibe un aparato dañado:
Inmediatamente póngase en contacto con el minorista o el constructor que le vendió el
aparato.
Ahorre tiempo y dinero:
Consulte la sección de solución de problemas al fi nal de este manual antes de llamar. Esta
sección le ayudará a resolver problemas comunes que pueden ocurrir.
19
REQUERIMIENTOS DE SEGURIDAD
Este aparato no está diseñado para ser utilizado
por personas (incluyendo niños) cuyas capacidades
físicas, sensoriales o mentales sean diferentes
o reducidas, o que carezcan de experiencia o
conocimiento, a menos que dichas personas
reciban supervisión o entrenamiento para operar
el aparato por una persona responsable de su la
seguridad.
Los niños deben ser supervisados para asegurarse
de que no juegan con el aparato.
Para evitar el riesgo de descarga eléctrica, no
utilice este deshumidifi cador en un área que pueda
acumular agua estancada. Si se desarrolla esta
condición, desconecte la fuente de alimentación
antes de entrar en el agua.
No almacene ni utilice materiales combustibles
tales como gasolina u otros vapores o líquidos
infl amables cerca de este o de cualquier otro
aparato.
No introduzca los dedos u otros objetos en las
parrillas o aberturas del aparato.
No cubra ni bloquee las aberturas de admisión y
de escape.
No opere el aparato sin el fi ltro instalado.
No utilice el aparato cerca de fuentes de calor.
Este aparato está destinado únicamente a
aplicaciones interiores y residenciales. No utilice
este deshumidifi cador en exteriores. No utilice este
deshumidifi cador para aplicaciones comerciales o
industriales.
INSTRUCCIONES DE CONEXION A TIERRA
Este aparato debe estar conectado a tierra. La
puesta a tierra reduce el riesgo de descarga
eléctrica proporcionando un cable de escape para
la corriente eléctrica.
Este aparato tiene un cable que tiene un cable de
conexión a tierra con un enchufe de 3 clavijas. El
cable de alimentación debe estar enchufado en
un tomacorriente que esté debidamente conectado
a tierra. Si el tomacorriente es un tomacorriente
de dos clavijas, debe ser reemplazado por un
tomacorriente de 3 clavijas con conexión a tierra
adecuada. La placa de características en serie
indica el voltaje y la frecuencia para los que está
diseñado el artefacto.
ADVERTENCIA - El uso incorrecto del enchufe
de conexión a tierra puede ocasionar un riesgo
de descarga eléctrica. Consulte a un electricista
califi cado o agente de servicio si las instrucciones
de conexión a tierra no se entienden completamente
o si existe duda sobre si el aparato está
debidamente conectado a tierra.
No conecte el aparato a cables de extensión,
adaptadores o junto con otro aparato en la misma
toma de corriente.
No empalme el cable de alimentación. No corte ni
extraiga en ningún caso la tercera clavija de tierra
del cable de alimentación.
Si el cable de alimentación está dañado, debe
ser reemplazado por el fabricante, su agente de
servicio o persona califi cada similar para evitar
riesgos.
Informacion de Seguridad Importante
LEA Y SIGA TODAS LAS INSTRUCCIONES DE SEGURIDAD
20
¡GUARDA ESTAS INSTRUCCIONES!
CARACTERISTICAS
Frente
1. Salida de aire
2. Panel de control
3. Manijas (ambos lados)
4. Cubo de agua
Espalda
1. Entrada de aire
2. Salida de drenaje continua
3. Banda de almacenamiento del cable de
alimentación
4. Salida de drenaje de la bomba
5. Cable de alimentación
1
2
3
4
1
2
3
4
5
21
INSTRUCCIONES DE OPERACIÓN
UBICACIÓN
Coloque el deshumidifi cador en un piso liso y
nivelado que sea lo sufi cientemente fuerte para
sostener el aparato con un cubo lleno de agua.
Para mantener la efi ciencia, haga funcionar
el aparato en un lugar cerrado. Mantenga las
puertas y ventanas cercanas cerradas.
Mantenga una distancia mínima de 20 cm (8
pulgadas) en los laterales y la parte posterior
del aparato y de 40 cm (16 pulgadas) en la
parte superior del aparato para permitir una
circulación adecuada del aire.
La temperatura de funcionamiento ambiente
recomendada está entre 5°C (41°F) y 35°C
(95°F).
No fuerce los rodillos para moverse sobre
alfombras ya que el aparato puede volcarse y
derramar agua.
Siempre que se coloque el aparato en la parte
posterior o lateral, se debe permitir que se
mantenga erguido durante 6 horas antes de
enchufarlo para evitar daños a los componentes
internos.
PANEL DE CONTROL
1. Botón de modo continuo y luz indicadora
Pulse este botón para activar el modo
continuo. Esto ejecutará la función de
deshumidifi cación continuamente. La luz
indicadora se encenderá cuando el modo
continuo esté activo.
2. Botón del temporizador y luz indicadora
Utilice este botón para ajustar la función del
temporizador.
3. Luz indicadora de descongelación
La luz indicadora de descongelación se
ilumina cuando se ha acumulado escarcha
en el interior del aparato. Esto puede indicar
que la temperatura ambiente es demasiado
fría. La función de deshumidifi cación cesará
hasta que se derrita la helada.
4. Luz indicadora de cubo completo
La luz indicadora de cubo completo se
iluminará cuando el cubo esté lleno de
agua. Vacíe el cubo para reanudar el
funcionamiento normal.
5. Pantalla y fl echas arriba y abajo
La pantalla mostrará la humedad ajustada,
la humedad ambiente o la función del
temporizador.
Las fl echas arriba y abajo pueden ajustar
la humedad ajustada o el ajuste del
temporizador.
La humedad se puede ajustar entre 35-85%
en incrementos del 5%. Para un aire más
seco, ajuste la humedad a un número más
bajo. Para el aire del amortiguador, ajuste la
humedad a un número más alto.
La visualización de la humedad ambiental es
precisa dentro de +/- 5%.
1
2 3 4
5
6
7 8 9
10
11
22
6. Botón de encendido
Utilice este botón para encender o apagar el
aparato.
7. Botón de la bomba y luz indicadora
Utilice este botón para activar la bomba
de drenaje. La luz indicadora se iluminará
cuando la bomba esté activa.
8. Botón de deshumidifi cación inteligente y luz
indicadora
Utilice este botón para activar el modo
de deshumidifi cación inteligente. El modo
de deshumidifi cación inteligente ajustará
automáticamente la velocidad de la
humedad y del ventilador en función de
la temperatura ambiente y la humedad.
La luz indicadora se iluminará cuando el
deshumidifi cador inteligente esté activo.
9. Botón del ventilador y luz indicadora
Presione este botón para ajustar la velocidad
del ventilador a baja o alta. Si el indicador
luminoso está apagado, el ventilador está
ajustado a baja velocidad. Si el indicador
luminoso está encendido, el ventilador se
ajusta a alta velocidad.
10. Botón del ventilador y luz indicadora
Presione este botón para ajustar la velocidad
del ventilador a baja o alta. Si el indicador
luminoso está apagado, el ventilador está
ajustado a baja velocidad. Si el indicador
luminoso está encendido, el ventilador se
ajusta a alta velocidad.
11. Botón de modo de ionizador y luz indicadora
Utilice este botón para activar la función del
ionizador. La luz indicadora se iluminará
cuando el ionizador esté activo.
INSTRUCCIONES DE OPERACIÓN
23
FUNCIÓN DEL TEMPORIZADOR
Función encendido automático
1. Pulse el botón del temporizador hasta que
se ilumine la luz indicadora de encendido
automático.
2. Utilice las fl echas arriba y abajo para
seleccionar la cantidad de tiempo deseada
antes de encender el aparato. Las fl echas hacia
arriba y hacia abajo sumarán o restarán 30
minutos de tiempo hasta 10 horas, luego a
incrementos de 1 hora hasta un máximo de 24
horas.
3. La hora seleccionada aparecerá en el panel de
visualización y contará hasta que el aparato se
encienda.
Función de apagado automático
1. Presione el botón del temporizador hasta que se
ilumine el indicador de apagado automático.
2. Utilice las fl echas arriba y abajo para
seleccionar la cantidad de tiempo deseada
antes de encender el aparato. Las fl echas hacia
arriba y hacia abajo sumarán o restarán 30
minutos de tiempo hasta 10 horas, luego a
incrementos de 1 hora hasta un máximo de 24
horas.
3. El tiempo seleccionado aparecerá en el panel de
visualización y contará hasta que el aparato se
apague.
Uso automático de encendido y apagado
simultáneamente
Las funciones de encendido automático y apagado
automático se pueden utilizar al mismo tiempo,
ajustando primero una y luego la otra. Ambas luces
indicadoras se iluminarán y la pantalla contará
hasta que el aparato se apague o se encienda, sea
cual sea la función que haya sido confi gurada en
primer lugar.
Nota: El temporizador no encenderá y apagará
el aparato indefi nidamente. Los temporizadores
auto on y auto off funcionarán una vez y luego el
aparato volverá a su funcionamiento normal.
Apagando el aparato, presionando el botón por
defecto del mando a distancia o desenchufando el
aparato se borrarán todos los ajustes de memoria,
incluido el temporizador.
FUNCIÓN DEL IONIZADOR
La función del ionizador es una forma de
purifi cación del aire que carga negativamente
el aire. Las partículas de polvo, polen y otras
partículas en el aire no pueden pasar a través
del fi ltro cuando están cargadas negativamente.
Esto asegura que la cantidad máxima de polvo y
suciedad se eliminan del aire. Además, la función
de ionizador ayuda a eliminar los olores no
deseados del aire.
REMOCION DE AGUA
Hay dos formas de eliminar el agua recogida del
aparato.
1. Cubo de agua
El deshumidifi cador automáticamente recogerá
agua condensada en el cubo de agua. Cuando
el cubo esté lleno, el compresor y el ventilador se
apagarán y la luz indicadora de cubo completo se
encenderá.
Para vaciar el cubo, retírelo suavemente del
aparato apretando ambos lados y tirando hacia
afuera. Tenga cuidado al retirar el cubo, estará
lleno y puede ser pesado.
No coloque el cubo de agua directamente en el
suelo. El fondo del cubo es desigual y se caerá y
derramará el agua.
Vacíe el cubo y vuelva a colocarlo en el aparato.
El deshumidifi cador no funcionará sin el cubo
instalado.
Nota: Al retirar el cubo, el brazo de la bomba de
drenaje puede caerse. Debe empujar suavemente
hacia arriba de nuevo en la posición correcta antes
de reemplazar el cubo.
INSTRUCCIONES DE OPERACIÓN
24
REMOCION DE AGUA
2. Drenaje Continuo
El agua se puede retirar del aparato usando
el drenaje continuo y una manguera de jardín
estándar (no suministrada).
Antes de usar cualquier función de drenaje
automático, verifi que que todos los puertos de
drenaje estén limpios y libres de residuos. Hay un
puerto de drenaje dentro del compartimento de la
cubeta del aparato, retire el cucharón para verlo.
Hay un puerto de drenaje en la parte posterior del
aparato donde se conecta la manguera de drenaje.
Todos los puertos de drenaje deben limpiarse con
un limpiador de tuberías antes de su uso.
Nota: No limpie los puertos de drenaje con algo
más rígido que un limpiador de tuberías ya que
esto puede dañar el aparato.
Nota: Si los puertos de drenaje están obstruidos o
sucios, puede ocasionar fugas de agua desde el
fondo del aparato.
Retire la cubierta de la salida de drenaje continua
y fi je el extremo roscado hembra de la manguera
de jardín a la parte posterior del aparato. Dirija el
otro extremo de la manguera de jardín a un cubo o
desagüe del piso.
Asegúrese de que la manguera de jardín no está
doblada y va hacia abajo desde la parte posterior
del aparato. El drenaje continuo sólo se activa por
gravedad, por lo que cualquier curva o movimiento
ascendente en la manguera impedirá que el agua
se drene.
La manguera de jardín debe ser cortada de modo
que no mida más de 1,8 m (6 pies) de largo. Si la
manguera de drenaje es demasiado larga, el agua
puede no drenarse por completo, lo que puede
provocar que el agua estancada y el moho se
acumulen dentro de la manguera.
REMOCION DE AGUA
3. Drenaje de la bomba
Si el drenaje continuo es inconveniente, el agua
puede ser retirada del aparato usando el drenaje
de la bomba.
Al utilizar la bomba, el aparato primero llenará
el cubo de agua y luego el brazo de la bomba
bombeará agua del cubo a través del drenaje y
hacia fuera de la manguera.
Retire la cubierta de la salida de drenaje de
la bomba y coloque la manguera de desagüe
suministrada. Dirija el otro extremo de la manguera
a un desagüe. Presione el botón de la bomba para
activar la función de la bomba. Cuando el cubo
está lleno, la bomba comenzará a trabajar.
Asegúrese de que la manguera de desagüe no esté
doblada, esto puede impedir que el agua se drene
correctamente y sobrecargar la bomba.
No conecte la manguera suministrada junto
con otra manguera. La longitud máxima de la
manguera de drenaje de la bomba no debe ser
mayor de 4,6 m (15 pies). Si la manguera de
drenaje es demasiado larga, el agua puede no
drenarse por completo, lo que puede provocar que
el agua estancada y el moho se acumulen dentro de
la manguera.
Cuando se utiliza el drenaje de la bomba, el
cubo de agua debe vaciarse cada pocos días
para asegurarse de que el agua en el cubo no se
estancan o crecen el moho.
INSTRUCCIONES DE OPERACIÓN
CUIDADO Y MANTENIMIENTO
FILTRO DE AIRE
El fi ltro de aire debe limpiarse aproximadamente
cada 2 semanas. El fi ltro de aire puede requerir
una limpieza más frecuente si hay caspa o pelaje
en el aire.
Aproximadamente cada dos semanas, la luz
indicadora del fi ltro en el panel de control se
iluminará como un recordatorio para limpiar el
ltro. Siga los pasos que se indican a continuación
para limpiar el fi ltro y volver a ponerlo en
funcionamiento normal.
1. El ltro de aire se encuentra detrás de la rejilla
de admisión trasera. Para quitar el fi ltro de aire,
sujete la lengüeta del fi ltro en la parte inferior
de la parrilla y deslícela hacia abajo.
2. Utilice una aspiradora con un accesorio de
cepillo suave para eliminar los residuos grandes
o acumulación de polvo del fi ltro de aire.
3. Lave el fi ltro en agua jabonosa tibia, por debajo
de 40°C (104°F), o use un agente de limpieza
neutro.
4. Enjuague el fi ltro con agua limpia y séquelo
completamente antes de volver a instalarlo en el
aparato.
5. Pulse el botón de fi ltro en el panel de control
para reanudar el funcionamiento normal.
Nota: No utilice el aparato sin el fi ltro de aire
instalado.
CÓDIGOS DE ERROR
Si el panel de visualización muestra alguno de los
siguientes códigos de error, desenchufe el aparato,
deje reposar durante 5-10 minutos y vuelva a
enchufarlo. Si el error persiste, llame al servicio
técnico.
AS - Error del sensor de humedad
ES - Error del sensor de temperatura
P2 - Cubo completo
E3 - Funcionamiento incorrecto del sensor
Eb - El cucharón quitado o no en la posición
correcta
EC - Error del sistema de refrigeración o error del
sensor
LIMPIEZA
Para evitar posibles descargas eléctricas, asegúrese
de que el aparato esté desenchufado antes de
realizar cualquier limpieza o mantenimiento.
El exterior del aparato se puede limpiar con un
paño suave o con un paño tibio y húmedo si es
necesario.
No utilice gasolina, benceno, diluyente o cualquier
otro producto químico para limpiar este aparato ya
que estas sustancias pueden dañar el acabado y la
deformación de las piezas de plástico.
Nunca vierta agua directamente sobre el
aparato ya que esto causará el deterioro de
los componentes eléctricos y el aislamiento del
cableado.
Asegúrese de que los puertos de drenaje en el
interior del artefacto y los puertos de drenaje en la
parte posterior del electrodoméstico estén libres de
suciedad y acumulación de calcio.
CUIDADO PARA EL FINAL DE LA TEMPORADA
Antes de poner el aparato en servicio durante el
año, haga funcionar el aparato en modo ventilador
durante medio día para asegurarse de que el
interior del aparato esté seco. Esto ayudará a evitar
el crecimiento de moho o moho dentro del aparato.
Asegúrese de que el fi ltro esté limpio y seco.
Guarde el aparato cubierto en un lugar seco.
DISPOSICIÓN
Este aparato no puede ser tratado como un residuo
doméstico normal, sino que debe ser llevado al
punto de recogida de residuos apropiado para el
reciclaje de componentes eléctricos. Compruebe la
conformidad reglamentaria local con respecto a la
eliminación aprobada y segura de este aparato.
25
SOLUCIÓN DE PROBLEMAS
PROBLEMA CAUSA POSIBLE
El aparato no funcionará El enchufe no está completamente insertado en la toma de
corriente de la pared
Fusible fundido o disyuntor
La humedad ambiente es menor que la humedad ajustada
El cubo está lleno o no está en la posición correcta
Insufi ciente deshumidifi cación • El ltro de aire está sucio
Flujo de aire bloqueado
El tamaño del dispositivo es demasiado pequeño para la
aplicación
La humedad ambiente es menor que la humedad ajustada
Ruido • El ltro de aire está sucio
El cucharón no está en la posición adecuada
• Superfi cie del piso no nivelada
Olores Formación de moho o moho en super cies mojadas internas
Coloque una tableta algicida en el cubo de agua
Agua en el piso La conexión de la manguera está suelta
Se ha quitado la tapa del drenaje
Acumulación de escarcha Cuando la temperatura ambiente es inferior a 5°C (41°F) puede
formarse escarcha
Cambie el aparato al modo ventilador sólo hasta que se derrita
el hielo
26
Danby cuidado del consumidor: 1-800-263-2629
Horas de operación:
Lunes a Jueves 8:30 am - 6:00 pm Hora estándar del este
Viernes 8:30 am - 4:00 pm Hora estándar del este
La información de este manual está sujeta a cambios sin previo aviso.
LIMITED IN-HOME APPLIANCE WARRANTY
This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating
conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter
“Danby”) or by an authorized distributor of Danby, and is non-transferable.
TERMS OF WARRANTY
Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.
First Year
During the rst twelve (12) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor’s
option, at no charge to the ORIGINAL purchaser.
To obtain
Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any app liance
Service
requiring service outside the limited boundaries of “In Home Service” , it will be the consumer’s responsibility to transport the appliance (at
their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Serv ice” below.
Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service
must be performed by a qualied service technician.
If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial appli cation, all
obligations of Danby under this warranty shall be void.
Boundaries of
If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be
In Home Service
delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualied and certif ied for
warranty service by Danby. Transportation charges to and from the service location are not protected by this warranty and are t he
responsibility of the purchaser.
Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other c ontents of this appliance, whether due
to any defect of the appliance, or its use, whether proper or improper.
EXCLUSIONS
Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied, m ade or intended by Danby or its
authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditio ns, representations or guarantees
under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall no t be responsible for any damages
to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o f the unit and by the purchase of
the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or propert y caused by the unit.
GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:
1) Power failure.
2) Damage in transit or when moving the appliance.
3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.
4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating con ditions
(extremely high or low room temperature).
5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, oods etc.
7) Service calls resulting in customer education.
8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out door application).
Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our
AUTHORIZED SERVICE DEPOT.
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone: (519) 837-0920 FAX: (519) 837-0449
Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840
Telephone: (419) 425-8627 FAX: (419) 425-8629
04/09
1-800-263-2629
Warranty Service
In-home
Durante los primeros veinticuatro (24) meses, cualquier parte en buen estado de este producto que resulte
defectuosa, incluyendo cualquier sistema sellado, será reparado o reemplazado, a opción del fabricante, sin
cargo para el comprador original.
Póngase en contacto con el distribuidor donde adquirió el electrodoméstico o póngase en contacto con el
centro de servicio autorizado más cercano de Danby, donde el servicio debe ser realizado por un técnico
cualificado. Si el servicio es realizado por cualquier persona que no sea un depósito de servicio autorizado,
todas las obligaciones de Danby bajo esta garantía serán nulas.
Es responsabilidad del comprador transportar el aparato al centro de servicio autorizado más cercano.
Primeros 24 meses
Para obtener servicio
GARANTÍA LIMITADA “ACARREADO SOLAMENTE”
Este producto de calidad está garantizado contra defectos de fabricación, incluyendo partes y mano de obra, siempre y cuando la
unidad se utilice bajo las condiciones normales de funcionamiento para las que fue diseñado.
Esta garantía está solamente disponible para la persona que haya comprado originalmente esta unidad directamente de Danby
Products Limited (Canada) o Danby Products Inc. (U.S.A.) (en adelante “Danby”) o uno de sus distribuidores autorizados, y no es
transferible.
CONDICIONES DE LA GARANTÍA
Las piezas plásticas, se autorizan por treinta (30) días solamente a partir de la fecha de la compra, sin las extensiones
proporcionadas.
Nada dentro de esta garantía implica que Danby será responsable por cualquier daño que hayan sufrido los alimentos u otros
contenidos de este aparato, ya sea debido a un defecto del aparato, o su uso, adecuado o inadecuado.
EXCLUSIONES
Salvo lo aquí indicado por Danby, no existen otras garantías, condiciones o representaciones, explícitas o implícitas, concretas o
intencionales por parte de Danby o sus distribuidores autorizados y todas las demás garantías, condiciones o representaciones,
incluyendo cualquier garantía, condiciones o representaciones bajo cualquier Acta de Venta de Productos o legislación o estatuto
similar, quedan de esta forma expresamente excluidas. Salvo lo aquí indicado, Danby no serán responsables por ningún daño a
personas o bienes, incluyendo la propia unidad, sin importar su causa, o de ningún daño indirecto causado por el desperfecto de la
unidad, y al comprar esta unidad, el comprador acepta por la presente, indemnizar y proteger a Danby contra cualquier reclamo
por daños a personas o bienes causados por la unidad.
CONDICIONES GENERALES
No se considerará ninguna de estas garantías o seguros cuando el daño o la necesidad de reparación sea el producto de los
siguientes casos:
1) Falla del suministro eléctrico.
2) Daños en tránsito o durante el transporte de la unidad.
3) Alimentación incorrecta, como bajo voltaje, instalación eléctrica defectuosa o fusibles inadecuados.
4) Accidente, modificación, abuso o uso incorrecto del artefacto, tal como insuficiente ventilación del ambiente o condiciones de
operación anormales (temperatura ambiente extremadamente alta o baja).
5) Utilización comercial o industrial (v.g., si el electrodoméstico no está instalado en una vivienda particular).
6) Incendio, daños por agua, robo, guerra, disturbios, hostilidades, actos de fuerza mayor como huracanes, inundaciones, etc.
7) Pedidos de servicio debido a desinformación del usuario.
8) Instalación inadecuada (v.g., instalación de un electrodoméstico independiente o uso de un aparato al aire libre que no esté
aprobado para aplicaciones en exteriores, incluyendo pero no limitado a: garajes, patios, porches o cualquier lugar que no esté bien
aislado o controlado por el clima).
Se requerirá una prueba de la fecha de compra para reclamaciones de garantía; conservar las facturas de venta. En el caso de que
se requiera servicio de garantía, presente el comprobante de compra a nuestro depósito de servicio autorizado.
Servicio de Garantía
Acarreado Solamente
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone: (519) 837-0920 FAX: (519) 837-0449
Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840
Telephone: (419) 425-8627 FAX: (419) 425-8629
1-800-263-2629
04/17
Los cargos de transporte desde y hacia el lugar de servicio no están protegidos por esta garantía y son responsabilidad del
comprador.
NOTES / REMARQUES / NOTAS :
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
NOTES / REMARQUES / NOTAS :
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
NOTES / REMARQUES / NOTAS :
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
MODEL • MODÈLE • MODELO
Printed in China
Imprimé en Chine
Impreso en China
Danby Products Limited, Guelph, ON, Canada N1H 6Z9
Danby Products Inc., Findlay, Ohio, USA 45840
MODEL MODÈLE MODELO
DDR095BDPWDB

Transcripción de documentos

OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE MANUAL DEL PROPIETARIO DEHUMIDIFIER Owner’s Manual...............................1 - 9 DÉSHUMIDIFICATEUR Manuel du propriétaire.................10 - 18 MODEL • MODÈLE • MODELO DDR095BDPWDB DESHUMIDIFICADOR Manual del propietario.................19 - 27 DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9 DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840 2018.01.24 Welcome Welcome to the Danby family. We are proud of our quality products and we believe in dependable service. We suggest that you read this owner’s manual before plugging in your new appliance as it contains important operation information, safety information, troubleshooting and maintenance tips to ensure the reliability and longevity of your appliance. Visit www.Danby.com to access self service tools, FAQs and much more. For additional assistance call 1-800-263-2629. Note the information below; you will need this information to obtain service under warranty. You must provide the original purchase receipt to validate your warranty and receive service. Model Number: _________________________________________________ Serial Number: _________________________________________________ Date of Purchase: _______________________________________________ Need Help? Before you call for service, here are a few things you can do to help us serve you better. Read this owner’s manual: It contains instructions to help you use and maintain your appliance properly. If you receive a damaged appliance: Immediately contact the retailer or builder that sold you the appliance. Save time and money: Check the troubleshooting section at the end of this manual before calling. This section will help you solve common problems that may occur. 1-800-26- Danby (1-800-263-2629) 1 Important Safety Information READ AND FOLLOW ALL SAFETY INSTRUCTIONS SAFETY REQUIREMENTS GROUNDING INSTRUCTIONS This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities may be different or reduced, or who lack experience or knowledge, unless such persons receive supervision or training to operate the appliance by a person responsible for their safety. This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current. This appliance has a cord that has a grounding wire with a 3-prong plug. The power cord must be plugged into an outlet that is properly grounded. If the outlet is a 2-prong wall outlet, it must be replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for. Children should be supervised to ensure that they do not play with the appliance. To avoid risk of electric shock, do not operate this dehumidifier in an area that is likely to accumulate standing water. If this condition develops, disconnect the power supply before stepping into the water. WARNING - Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. Do not store or use combustible materials such as gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. Do not insert fingers or other objects into grills or openings in the appliance. Do not connect the appliance to extension cords, adapters or together with another appliance in the same wall outlet. Do not cover or block the intake and exhaust openings. Do not splice the power cord. Do not under any circumstances cut or remove the third ground prong from the power cord. Do not operate the appliance without the filter installed. If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified person in order to avoid hazard. Do not operate the appliance near heat sources. This appliance is intended for indoor, residential applications only. Do not use this dehumidifier outdoors. Do not use this dehumidifier for commercial or industrial applications. SAVE THESE INSTRUCTIONS! 2 OPERATING INSTRUCTIONS LOCATION FEATURES • Place the dehumidifier on a smooth, level floor that is strong enough to support the appliance with a full bucket of water. Front 1. 2. 3. 4. • To maintain efficiency, operate the appliance in an enclosed area. Keep nearby doors and windows closed. Air Outlet Control Panel Handles (both sides) Water Bucket 1 • Maintain a minimum clearance of 20 cm (8 inches) on the sides and back of the appliance and 40 cm (16 inches) on the top of the appliance to allow for proper air circulation. 2 • The recommended ambient operating temperature is between 5°C (41°F) and 35°C (95°F). 3 • Do not force rollers to move over carpeting as the appliance may tip over and spill water. • Any time the appliance is placed on its back or side, it must be allowed to stand upright for 6 hours before plugging in to avoid damage to internal components. 4 Back 1. 2. 3. 4. 5. Air Inlet Continuous Drain Outlet Power Cord Storage Band Pump Drain Outlet Power Cord 1 2 3 4 5 3 OPERATING INSTRUCTIONS CONTROL PANEL 6. Power Button • Use this button to turn the appliance on or off. 1. Continuous Mode Button and Indicator Light • Press this button to activate continuous mode. This will run the dehumidifying function continuously. The indicator light will turn on when continuous mode is active. 2. Timer Button and Indicator Lights • Use this button to set the timer function. 7. Pump Button and Indicator Light • Use this button to activate the drain pump. The indicator light will illuminate when the pump is active. 3. Defrost Indicator Light • The defrost indicator light will illuminate when frost has accumulated on the interior of the appliance. This can indicate that the ambient temperature is too cold. The dehumidifying function will cease until the frost has melted. 8. Smart Dehumidify Button and Indicator Light • Use this button to activate smart dehumidify mode. Smart dehumidify will automatically set the humidity and fan speed based on the ambient temperature and humidity. The indicator light will illuminate when comfort mode is active. 4. Full Bucket Indicator Light • The full bucket indicator light will illuminate when the bucket is full of water. Empty the bucket to resume regular functioning. 9. Filter Button and Indicator Light • The filter light will illuminate when the filter needs to be cleaned. Press the filter button once the filter has been cleaned to return to regular functioning. 5. Display and Up and Down Arrows • The display will show the set humidity, the ambient humidity or the timer function. • The up and down arrows can adjust the set humidity or the timer setting. • The humidity can be set between 35-85% in 5% increments. For drier air, set the humidity to a lower number. For damper air, set the humidity to a higher number. • The ambient humidity display is accurate within +/- 5%. 2 10. Fan Button and Indicator Light • Press this button to set the fan speed to low or high. If the indicator light is off, the fan is set to low speed. If the indicator light is on, the fan is set to high speed. 11. Ionizer Mode Button and Indicator Light • Use this button to activate the ionizer function. The indicator light will illuminate when the ionizer is active. 3 4 1 6 5 7 8 9 10 4 11 OPERATING INSTRUCTIONS TIMER FUNCTION WATER REMOVAL Auto On Function There are three ways to remove collected water from the appliance. 1. Press the timer button until the auto on indicator light illuminates. 2. Use the up and down arrows to select the desired amount of time before the appliance should turn on. The up and down arrows will add or subtract 30 minutes of time up to 10 hours, then at 1 hour increments up to a maximum of 24 hours. 3. The time selected will appear on the display panel and will count down until the appliance turns on. 1. Water Bucket The dehumidifier will automatically collect condensed water in the water bucket. When the bucket is full, the compressor and fan will turn off and the full bucket indicator light will turn on. The display will show “P2”. To empty the bucket, gently remove it from the appliance by gripping both sides and pulling outward. Be cautious when removing the bucket, it will be full and can be heavy. Auto Off Function 1. Press the timer button until the auto off indicator light illuminates. 2. Use the up and down arrows to select the desired amount of time before the appliance should turn on. The up and down arrows will add or subtract 30 minutes of time up to 10 hours, then at 1 hour increments up to a maximum of 24 hours. 3. The time selected will appear on the display panel and will count down until the appliance turns off. Do not place the water bucket directly on the floor. The bottom of the bucket is uneven and it will fall over and spill water. Empty the bucket and replace it in the appliance. The dehumidifier will not function without the bucket installed. Note: When removing the bucket, the pump arm for the drain pump may fall down. It must be gently pushed upward back into the correct position before replacing the bucket. Using Auto On and Auto Off Simultaneously The auto on and auto off functions can be used at the same time by first setting one and then the other. Both indicator lights will illuminate and the display will count down to the appliance either turning off or on, whichever function was set first. Note: The timer will not cycle the appliance on and off indefinitely. The auto on and auto off timers will function one time and then the appliance will return to regular functioning. Turning the appliance off, pressing the default button on the remote or unplugging the appliance will clear all memory settings, including the timer. IONIZER FUNCTION The ionizer function is a form of air purification that negatively charges the air. Dust particles, pollen and other particles in the air cannot pass through the filter when they are negatively charged. This ensures that the maximum amount of dust and dirt are removed from the air. Additionally, the ionizer function helps to remove unwanted odors from the air. 5 OPERATING INSTRUCTIONS WATER REMOVAL WATER REMOVAL 2. Continuous Drain 3. Pump Drain Water can be removed from the appliance using the continuous drain and a standard garden hose (not provided). If the continuous drain is inconvenient, water can be removed from the appliance using the pump drain. When using the pump, the appliance will first fill the bucket with water and then the pump arm will pump water from the bucket through the drain and out the hose. Before using any automatic drain functions, check that all drain ports are clean and free of debris. There is one drain port inside the bucket compartment of the appliance, remove the bucket to see it. There is one drain port on the back of the appliance where the drain hose attaches. All drain ports should be cleaned with a pipe cleaner prior to use. Remove the cover from the pump drain outlet and attach the provided drain hose. Direct the other end of the hose to a drain. Press the pump button to activate the pump function. When the bucket is full, the pump will begin to work. Note: Do not clean the drain ports with anything more rigid than a pipe cleaner as this can damage the appliance. Ensure that the drain hose is not bent, this can stop the water from draining correctly and overwork the pump. Note: If the drain ports are clogged or dirty it can cause water to leak from the bottom of the appliance. Do not connect the provided hose together with another hose. The maximum length of the pump drain hose should be no more than 4.6 m (15 feet). If the drain hose is too long water may not drain completely which can lead to stagnant water and mildew build up inside the hose. Remove the cover from the continuous drain outlet and attach the female threaded end of the garden hose to the back of the appliance. Direct the other end of the garden hose to a bucket or floor drain. When using the pump drain, the water bucket should be emptied every few days to ensure that the water in the bucket does not become stagnant or grow mildew. Ensure that the garden hose is not bent and goes straight down from the back of the appliance. The continuous drain is only activated by gravity so any bends or upward motion in the hose will stop the water from draining. The garden hose should be cut so that it is no more than 1.8 m (6 feet) long. If the drain hose is too long water may not drain completely which can lead to stagnant water and mildew build up inside the hose. 6 CARE & MAINTENANCE AIR FILTER CLEANING The air filter should be cleaned approximately every 2 weeks. The air filter may require more frequent cleaning if there is significant dander or fur in the air. To avoid possible electric shock, ensure that the appliance is unplugged before performing any cleaning or maintenance. The outside of the appliance can be wiped clean with a soft cloth or with a lukewarm, damp cloth if necessary. Approximately every two weeks, the filter indicator light on the control panel will illuminate as a reminder to clean the filter. Follow the steps below to clean the filter and return the appliance to normal functioning. Do not use gasoline, benzene, thinner or any other chemicals to clean this appliance as these substances can cause damage to the finish and deformation of plastic parts. 1. The air filter is located behind the rear intake grill. To remove the air filter, grasp the filter tab on the bottom of the grill and slide it downward. Never pour water directly onto the appliance as this will cause deterioration of electrical components and wiring insulation. 2. Use a vacuum cleaner with a soft brush attachment to remove any large debris or dust build up from the air filter. Ensure that the drain ports on the interior of the appliance and the drain ports on the back of the appliance are free of dirt and calcium build up. 3. Wash the filter in lukewarm, soapy water, below 40°C (104°F), or use a neutral cleaning agent. END OF SEASON CARE 4. Rinse the filter with clean water and dry thoroughly before reinstalling in the appliance. Before removing the appliance from service for the year, operate the appliance on high fan mode for half a day to ensure that the inside of the appliance is dry. This will help avoid the growth of mold or mildew inside the appliance. Ensure the filter is clean and dry. Store the appliance covered in a dry location. 5. Press the filter button on the control panel to resume normal functioning. Note: Do not operate the appliance without the air filter installed. ERROR CODES DISPOSAL If the display panel shows any of the below error codes, unplug the appliance, let it stand for 5-10 minutes and then plug it back in. If the error persists, call for service. This appliance may not be treated as regular household waste, it should be taken to the appropriate waste collection point for recycling of electrical components. Check for local regulatory compliance regarding approved and safe disposal of this appliance. AS - Humidity sensor error ES - Temperature sensor error P2 - Full bucket E3 - Sensor malfunction Eb - Bucket removed or not in the correct position EC - Cooling system error or sensor error 7 TROUBLESHOOTING Danby Consumer Care: 1-800-263-2629 Hours of operation: Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time Friday 8:30 am - 4:00 pm Eastern Standard Time Information in this manual is subject to change without notice. PROBLEM Appliance will not operate POSSIBLE CAUSE • Plug is not fully inserted into the wall outlet • Blown fuse or circuit breaker • Ambient humidity is lower than the set humidity • Bucket is full or is not in the proper position Insufficient dehumidifying • Air filter is dirty • Blocked air flow • Appliance size is too small for application • Ambient humidity is lower than the set humidity Noise • Air filter is dirty • Bucket is not in proper position • Floor surface is not level Odors • Formation of mold or mildew on internal wet surfaces • Place an algaecide tablet in the water bucket Water on floor • Hose connection is loose • Drain cover has been removed Frost build up • When ambient temperature is below 5°C (41°F) frost may form • Switch the appliance to fan only mode until the frost melts 8 LIMITED IN-HOME WARRANTY LIMITED “CARRY APPLIANCE IN” WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating conditions by the manufacturer.to be free from manufacturer’s defects in material and workmanship, provided that the unit is used This qualityintended product is warranted under the normal operating conditions intended manufacturer. This warranty is available only to the person to whom the unitbywasthe originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter This warranty is authorized availabledistributor only to of the person whom the unit was originally sold by Danby Products Limited (Canada) or Danby “Danby”) or by an Danby, and istonon-transferable. Products Inc. (U.S.A.) (hereafter “Danby”) or by an authorized distributor of Danby, and is non-transferable. TERMS OF WARRANTY TERMS OF WARRANTY Plastic are warranted for(30) thirty (30)from days fromdate, the with datenoofextensions purchase, with no extensions provided. Plastic parts parts, are warranted for thirty days only purchase provided. First 24 months First Year During the first twenty four (24) months, any functional parts of this product found to be defective, will be repaired the firstattwelve (12) months, any functional of thistoproduct found topurchaser. be defective, will be repaired or replaced, at warrantor’s orDuring replaced, warrantor’s option, at no parts charge the original option, at no charge to the ORIGINAL purchaser. To obtain service To obtain Service Contact the dealer where the unit was purchased, or contact the nearest authorized Danby service depot, where service must be by boundaries a qualified technician. If service performed on Depot. the unit other Danby reserves theperformed right to limit the of “Inservice Home Service” to the proximity of anisAuthorized Service Anybyappanyoneliance than an authorized depot, all obligations of Danby warrantyresponsibility shall be void. requiring service outsideservice the limited boundaries of “In Home Service” , itunder will be this the consumer’s to transport the appliance (at their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Serv ice” below. It Contact is the responsibility theyour purchaser to transport the appliance the nearest depot. your dealer from of whom unit was purchased, or contact your nearest to authorized Danby authorized service depot, service where service must be performed by a qualified service technician. If service is performed the unitslocation by anyoneare othernot thanprotected an authorized depot, or theand unit isare usedthe for responsibility commercial appli of thecation, all Transportation charges to and from theonservice byservice this warranty purchaser. obligations of Danby under this warranty shall be void. Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other Boundaries If the appliance a location 100 appliance, kilometers (62 miles) morewhether from the nearest service center your unit must be contents ofofthis appliance, whetheris installed due to inany defectthat ofisthe or itsoruse, proper or improper. In Home Service delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualified and certif ied for warranty service by Danby. Transportation charges EXCLUSIONS to and from the service location are not protected by this warranty and are t he responsibility of thethere purchaser. Save as herein provided, by Danby, are no other warranties, conditions, representations or guarantees, express or implied, made or intended by Danby or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, or will guarantees under anyforSale of Goods Act or like or legislation statuteof is expressly Nothing within this warrantyrepresentations shall imply that Danby be responsible or liable any spoilage or damage to food other c orontents thishereby appliance, whether due excluded. hereinorprovided, Danby not be responsible for any damages to persons or property, including the unit itself, to any defectSave of theas appliance, its use, whether propershall or improper. howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmlessEXCLUSIONS Danby from any claim for damages to persons or property caused by the unit. Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied, m ade or intended by Danby or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditio ns, representations or guarantees GENERAL PROVISIONS under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall no t be responsible for any damages No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following: to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o f the unit and by the purchase of 1) Power failure. the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or propert y caused by the unit. 2) Damage in transit or when moving the appliance. 3) Improper power supply such as low voltage, defective house wiring or inadequate fuses. 4) Accident, alteration, abuse or misuse of the appliance GENERAL such asPROVISIONS inadequate air circulation in the room or abnormal operating conditions extremely high or low room temperature). No warranty(ie. or insurance herein contained or set out shall apply when damage or repair is caused by any of the following: 5) Use1)forPower commercial failure. or industrial purposes (ie. If the appliance is not installed in a domestic residence). 6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc. 2) Damage in transit or when moving the appliance. 7) Service calls resulting in customer education. 3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.an appliance outdoors that is not approved for outdoor 8) Improper Installation (ie. Building-in of a free standing appliance or using 4) Accident, alteration, or misuseto: of the appliancepatios, such as inadequate air circulation in the or abnormal operating con or climate ditions controlled). application, including but abuse not limited garages, porches or anywhere thatroom is not properly insulated (extremely high or low room temperature). Proof of date will be required for(ie.warranty claims; of sale.residence). In the event that warranty service is required, present 5) purchase Use for commercial or industrial purposes If the appliance is not retain installedbills in a domestic the proof of purchase to our service 6) Fire, water damage, theft,authorized war, riot, hostility, acts ofdepot. God such as hurricanes, floods etc. 7) Service calls resulting in customer education. 8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out door application). Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our AUTHORIZED SERVICE DEPOT. Warranty Service Warranty Service In-home Carry In Danby Products Limited Danby Products Limited PO 1778, Guelph, Ontario, N1H 6Z9 POBox Box 1778, Guelph, Ontario, Canada N1H Canada 6Z9 Telephone: (519) 837-0920 FAX: (519) 837-0449 Telephone: (519) 837-0920 FAX: (519) 837-0449 1-800-263-2629 1-800-263-2629 04/17 04/09 Danby Products Danby Products Inc. Inc. PO Box PO 669, Findlay, U.S.A. Box 669, Findlay,Ohio, Ohio, U.S.A. 45840 45840 Telephone: Telephone: (419) 425-8627 (419) 425-8629 (419) 425-8627 FAX: FAX: (419) 425-8629 Bienvenue Bienvenue à la famille Danby. Nous sommes fiers de la qualité de nos produits et nous croyons en le service fiable. Nous vous suggérons de lire ce manual d’utilisation avant de brancher votre nouvel appareil car il contient des informations inportantes sur l’utilisation, la sécurité, le dépannage et la maintenance, afin d’assurer la fiabilité et la longévité de votre appareil. Visitez www.Danby.com pour accéder aux outils d’autoservice, aux FAQ et bien plus encore. Pour obtenir de l’aide supplémentaire, composez 1-800-263-2629. Notez les informations ci-dessous; Vous aurez besoin de cette information pour obtenir un service sous garantie. Vous devez fournir le reçu d’achat original pour valider votre garantie et recevoir le service. Numéro de modèle: _____________________________________________ Numéro de serie: _______________________________________________ Date d’achat: __________________________________________________ Besoin d’assistance? Avant d’appeler pour service, voici quelques choses que vous pouvez faire pour nous aider à mieux vous servir. Lire ce manuel du propriétaire: Il contient des instructions pour vous aider à utiliser et à maintenir votre appareil correctement. Si vous recevez un appareil endommagé: Contactez immédiatement le revendeur ou l’entrepreneur qui vous a vendu l’appareil. Gagnez du temps et de l’argent: Avant d’appeler pour service, consultez la section de dépannage à la fin de ce manuel. Cette section vous aidera à résoudre les problèmes courants pouvant survenir. 1-800-26- Danby (1-800-263-2629) 10 Informations importantes de sécurité LIRE ET SUIVRE TOUTES LES INSTRUCTIONS DE SÉCURITÉ EXIGENCES DE SÉCURITÉ INSTRUCTIONS DE MISE À LA TERRE Cet appareil n’est pas destiné à être utilisé par des personnes (y compris des enfants) dont les capacités physiques, sensorielles ou mentales peuvent être différentes ou réduites, ou qui n’ont pas d’expérience ou de connaissances, à moins que ces personnes ne soient surveillées ou formées pour faire fonctionner l’appareil par une personne responsable de leur sécurité. Cet appareil doit être mis à la terre. La mise à la terre réduit le risque de choc électrique en fournissant un câble d’échappement pour le courant électrique. Les enfants devraient être surveillés pour s’assurer qu’ils ne jouent pas avec l’appareil. Pour éviter tout risque de choc électrique, ne pas utiliser ce déshumidificateur dans une zone susceptible d’accumuler de l’eau stagnante. Si cette condition se développe, débranchez l’alimentation avant de pénétrer dans l’eau. Ne pas stocker ou utiliser des matériaux combustibles tels que de l’essence ou d’autres vapeurs ou liquides inflammables à proximité de ce ou d’un autre appareil. Ne pas insérer de doigts ou d’autres objets dans des grilles ou des ouvertures dans l’appareil. Ne pas couvrir ou bloquer les ouvertures d’admission et d’échappement. N’utilisez pas l’appareil sans le filtre installé. N’utilisez pas l’appareil à proximité de sources de chaleur. Cet appareil est destiné uniquement à des applications résidentielles et intérieures. N’utilisez pas ce déshumidificateur à l’extérieur. N’utilisez pas ce déshumidificateur pour des applications commerciales ou industrielles. Cet appareil possède un cordon doté d’un fil de mise à la terre avec une fiche à 3 broches. Le cordon d’alimentation doit être branché sur une prise correctement mise à la terre. Si la sortie est une prise murale à 2 broches, elle doit être remplacée par une prise murale à 3 broches correctement mise à la terre. La plaque signalétique en série indique la tension et la fréquence auxquelles l’appareil est conçu. AVERTISSEMENT - L’utilisation incorrecte de la fiche de mise à la terre peut entraîner un risque d’électrocution. Consultez un électricien qualifié ou un agent de service si les instructions de mise à la terre ne sont pas complètement comprises, ou s’il existe un doute quant à savoir si l’appareil est correctement mis à la terre. Ne branchez pas l’appareil à des rallonges, des adaptateurs ou à un autre appareil dans la même prise murale. Ne pas épisser le cordon d’alimentation. Ne coupez ou retirez en aucun cas la troisième broche du cordon d’alimentation. Si le cordon d’alimentation est endommagé, il doit être remplacé par le fabricant, son agent de maintenance ou une personne qualifiée similaire afin d’éviter tout risque. GARDEZ CES INSTRUCTIONS! 11 INSTRUCTIONS D’UTILISATION EMPLACEMENT CARACTÉRISTIQUES • Placez le déshumidificateur sur un plancher lisse et plat qui est assez solide pour supporter l’appareil avec un seau complet d’eau. Avant • Pour maintenir l’efficacité, faites fonctionner l’appareil dans une zone fermée. Gardez les portes et les fenêtres fermées à proximité. 1. 2. 3. 4. Sortie d’air Panneau de contrôle Poignées (des deux côtés) Seau d’eau 1 • Maintenir un dégagement minimum de 20 cm (8 pouces) sur les côtés et l’arrière de l’appareil et 40 cm (16 pouces) sur le dessus de l’appareil pour permettre une circulation d’air appropriée. 2 • La température de fonctionnement ambiante recommandée est comprise entre 5°C (41°F) et 35°C (95°F). 3 • Ne pas forcer les rouleaux à se déplacer sur les moquettes car l’appareil peut basculer et renverser de l’eau. 4 • Chaque fois que l’appareil est placé sur son dos ou sur son côté, il doit pouvoir se tenir debout pendant 6 heures avant de brancher pour éviter d’endommager les composants internes. Arrière 1. 2. 3. 4. 5. Entrée d’air Prise de vidange continue Bande de stockage du cordon d’alimentation Sortie de drain de pompe Cordon d’alimentation 1 2 3 4 5 12 INSTRUCTIONS D’UTILISATION PANNEAU DE CONTRÔLE 1. Bouton de mode continu et voyant lumineux • Appuyez sur ce bouton pour activer le mode continu. Cela entraînera en continu la fonction de déshumidification. Le voyant s’allume lorsque le mode continu est activé. 2. Bouton de minuterie et voyants lumineux • Utilisez ce bouton pour régler la fonction de minuterie. 3. Voyant lumineux de dégivrage • Le témoin de dégivrage s’allume lorsque le givre s’est accumulé à l’intérieur de l’appareil. Cela peut indiquer que la température ambiante est trop froide. La fonction de déshumidification cessera jusqu’à ce que le givre ait fondu. 4. Voyant lumineux de seau plein • Le voyant du seau complet s’allume lorsque le seau est plein d’eau. Videz le seau pour reprendre le fonctionnement régulier. 5. Écran d’affichage et flèches haut et bas • L’affichage indique l’humidité définie, l’humidité ambiante ou la fonction de minuterie. • Les flèches haut et bas peuvent ajuster l’humidité définie ou le réglage de la minuterie. • L’humidité peut être réglée entre 35-85% par incréments de 5%. Pour un air plus sec, régler l’humidité à un nombre inférieur. Pour l’air amortisseur, régler l’humidité à un nombre plus élevé. • L’affichage de l’humidité ambiante est précis entre +/- 5%. 2 6. Bouton d’alimentation • Utilisez ce bouton pour allumer ou éteindre l’appareil. 7. Bouton de pompe et voyant lumineux • Utilisez ce bouton pour activer la pompe de vidange. Le témoin lumineux s’allume lorsque la pompe est active. 8. Déshumidification intelligente et voyant lumineux • Utilisez ce bouton pour activer le mode de déshumidification intelligent. Le mode de déshumidification intelligent définit automatiquement l’humidité et la vitesse du ventilateur en fonction de la température ambiante et de l’humidité. Le témoin lumineux s’allume lorsque le déshumidification intelligent est activé. 9. Bouton de filtre et voyant lumineux • La lumière du filtre s’allume lorsque le filtre doit être nettoyé. Appuyez sur le bouton de filtre une fois que le filtre a été nettoyé pour revenir au fonctionnement régulier. 10. Bouton de ventilateur et voyant lumineux • Appuyez sur cette touche pour régler la vitesse du ventilateur à faible ou à haute. Si le témoin lumineux est éteint, le ventilateur est réglé à faible vitesse. Si le témoin lumineux est allumé, le ventilateur est réglé sur une vitesse élevée. 11. Bouton de mode Ioniseur et voyant lumineux • Utilisez ce bouton pour activer la fonction ioniseur. Le voyant s’allume lorsque l’ioniseur est actif. 3 4 1 6 5 7 8 9 10 13 11 INSTRUCTIONS D’UTILISATION FONCTION DE MINUTERIE ELIMINATION D’EAU Fonction d’activation automatique Il existe trois façons d’éliminer l’eau collectée de l’appareil. 1. Appuyez sur le bouton de la minuterie jusqu’à ce que le voyant d’activation automatique s’allume. 2. Utilisez les flèches haut et bas pour sélectionner la durée souhaitée avant que l’appareil ne s’allume. Les flèches haut et bas ajouteront ou soustracteront 30 minutes de temps jusqu’à 10 heures, puis à des incréments de 1 heure jusqu’à un maximum de 24 heures. 3. L’heure sélectionnée apparaîtra sur le panneau d’affichage et débutera jusqu’à ce que l’appareil s’allume. Fonction de désactivation automatique 1. Appuyez sur le bouton de la minuterie jusqu’à ce que le témoin de désactivation automatique s’allume. 2. Utilisez les flèches haut et bas pour sélectionner la durée souhaitée avant que l’appareil ne s’allume. Les flèches haut et bas ajouteront ou soustracteront 30 minutes de temps jusqu’à 10 heures, puis à des incréments de 1 heure jusqu’à un maximum de 24 heures. 3. L’heure sélectionnée apparaîtra sur le panneau d’affichage et débutera jusqu’à ce que l’appareil s’éteigne. Utilisation automatique activée et désactivée simultanément 1. Seau d’eau Le déshumidificateur collectera automatiquement l’eau condensée dans le seau d’eau. Lorsque le seau est plein, le compresseur et le ventilateur s’éteignent et le voyant du seau complet s’allume. L’écran affiche “P2”. Pour vider le seau, retirez-le doucement de l’appareil en agrippant les deux côtés et en tirant vers l’extérieur. Soyez prudent lors de l’enlèvement du seau, il sera plein et peut être lourd. Ne placez pas le seau à eau directement sur le sol. Le fond du seau est inégal et il tombera et déversera de l’eau. Videz le seau et remettez-le dans l’appareil. Le déshumidificateur ne fonctionnera pas sans le godet installé. Remarque: Lorsque vous retirez le seau, le bras de pompe pour la pompe de vidange peut tomber. Il doit être repoussé doucement vers le haut dans la position correcte avant de remplacer le seau. Les fonctions d’activation automatique et de désactivation automatique peuvent être utilisées simultanément en réglant d’abord l’une puis l’autre. Les deux voyants lumineux s’allument et l’affichage décompte vers le bas pour que l’appareil soit éteint ou allumé, quelle que soit la fonction réglée en premier. Remarque: La minuterie ne met pas l’appareil sous tension et hors tension indéfiniment. Les minuteries auto activées et désactivées fonctionneront une fois, puis l’appareil revient à un fonctionnement régulier. Si vous éteignez l’appareil, appuyez sur le bouton par défaut de la télécommande ou débranchez l’appareil pour effacer tous les paramètres de la mémoire, y compris la minuterie. FONCTION IONISEUR La fonction ioniseur est une forme de purification de l’air qui charge négativement l’air. Les particules de poussière, le pollen et d’autres particules dans l’air ne peuvent pas traverser le filtre lorsqu’ils sont chargés négativement. Cela garantit que la quantité maximale de poussière et de saleté est éliminée de l’air. En outre, la fonction ioniseur aide à éliminer les odeurs indésirables de l’air. 14 INSTRUCTIONS D’UTILISATION ELIMINATION D’EAU ELIMINATION D’EAU 2. Drain continu 3. Vidange de pompe L’eau peut être retirée de l’appareil à l’aide du drain continu et d’un tuyau d’arrosage standard (non fourni). Si le drain continu est gênant, l’eau peut être retirée de l’appareil à l’aide du drain de la pompe. Avant d’utiliser des fonctions de vidange automatique, vérifiez que tous les orifices de vidange sont propres et exempts de débris. Il y a un orifice de vidange dans le compartiment à godets de l’appareil, retirez le seau pour le voir. Il y a un port de vidange à l’arrière de l’appareil où le tuyau de vidange se fixe. Tous les orifices de vidange doivent être nettoyés avec un cure-pipe avant utilisation. Remarque: Ne nettoyez pas les orifices de vidange avec un élément plus rigide qu’un nettoyeur de canalisation car cela pourrait endommager l’appareil. Remarque: Si les orifices de vidange sont obstrués ou sales, l’eau risque de fuir du bas de l’appareil. Retirez le couvercle de la sortie de vidange continue et fixez l’extrémité filetée femelle du tuyau d’arrosage à l’arrière de l’appareil. Dirigez l’autre extrémité du tuyau d’arrosage vers un seau ou un drain de plancher. Assurez-vous que le tuyau d’arrosage n’est pas plié et descend droit de l’arrière de l’appareil. Le drain continu n’est activé que par gravité, de sorte que les virages ou le mouvement vers le haut dans le tuyau empêchent l’évacuation de l’eau. Lors de l’utilisation de la pompe, l’appareil remplit d’abord le seau avec de l’eau, puis le bras de pompe pompe l’eau du seau dans le drain et le tuyau. Retirez le couvercle de la sortie de vidange de la pompe et fixez le tuyau de vidange fourni. Dirigez l’autre extrémité du tuyau vers un drain. Appuyez sur le bouton de la pompe pour activer la fonction de la pompe. Lorsque le seau est plein, la pompe commencera à fonctionner. Assurez-vous que le tuyau de vidange n’est pas plié, cela peut empêcher l’eau de s’écouler correctement et de surcharger la pompe. Ne raccordez pas le tuyau fourni avec un autre tuyau. La longueur maximale du tuyau de vidange de la pompe ne doit pas dépasser 4.6 m (15 pieds). Si le tuyau de vidange est trop long, l’eau peut ne pas s’effondrer complètement, ce qui peut entraîner une accumulation d’eau stagnante et de la moisissure dans le tuyau. Lorsque vous utilisez le drain de la pompe, le godet d’eau doit être vidé tous les jours pour s’assurer que l’eau dans le seau ne stagne pas ou que la moisissure augmente. Le tuyau d’arrosage doit être coupé afin qu’il ne dépasse pas 1.8 m (6 pieds) de long. Si le tuyau de vidange est trop long, l’eau peut ne pas s’effondrer complètement, ce qui peut entraîner une accumulation d’eau stagnante et de la moisissure dans le tuyau. 15 SOINS ET MAINTENANCE FILTRE À AIR NETTOYAGE Le filtre à air doit être nettoyé environ toutes les 2 semaines. Le filtre à air peut nécessiter un nettoyage plus fréquent si il y a un choc important ou de la fourrure dans l’air. Pour éviter tout risque d’électrocution, assurez-vous que l’appareil est débranché avant d’effectuer un nettoyage ou une maintenance. Environ toutes les deux semaines, le voyant du filtre sur le panneau de commande s’allume comme un rappel pour nettoyer le filtre. Suivez les étapes cidessous pour nettoyer le filtre et retournez l’appareil au fonctionnement normal. 1. Le filtre à air est situé derrière la grille d’admission arrière. Pour retirer le filtre à air, saisissez la languette du filtre au bas de la grille et faites-la glisser vers le bas. 2. Utilisez un aspirateur avec une brosse douce pour enlever les grands débris ou la poussière du filtre à air. 3. Lavez le filtre dans de l’eau tiède savonneuse, inférieure à 40°C (104°F), ou utilisez un agent de nettoyage neutre. 4. Rincez le filtre avec de l’eau propre et séchez bien avant de le réinstaller dans l’appareil. L’extérieur de l’appareil peut être nettoyé avec un chiffon doux ou avec un chiffon tiède et humide si nécessaire. N’utilisez pas d’essence, de benzène, de diluant ou d’autres produits chimiques pour nettoyer cet appareil car ces substances peuvent endommager l’enduit et la déformation des pièces en plastique. Ne versez jamais d’eau directement sur l’appareil, car cela entraînera une détérioration des composants électriques et de l’isolation des câbles. Assurez-vous que les orifices de vidange à l’intérieur de l’appareil et les orifices de vidange à l’arrière de l’appareil sont exempts de saleté et d’accumulation de calcium. SOINS POUR LA FIN DE SAISON Remarque: Ne faites pas fonctionner l’appareil sans le filtre à air installé. Avant de retirer l’appareil du service pour l’année, faites fonctionner l’appareil sur le mode ventilateur élevé pendant une demi-journée pour vous assurer que l’intérieur de l’appareil est sec. Cela aidera à éviter la croissance de la moisissure ou de la moisissure à l’intérieur de l’appareil. Assurez-vous que le filtre est propre et sec. Rangez l’appareil dans un endroit sec. CODES D’ERREUR ÉLIMINATION Si le panneau d’affichage affiche l’un des codes d’erreur ci-dessous, débranchez l’appareil, laissez reposer pendant 5 à 10 minutes, puis rallumez-le. Si l’erreur persiste, appelez pour le service. Cet appareil ne doit pas être considéré comme un ordures ménagères, mais il doit être pris au point approprié de collecte des déchets pour le recyclage des composants électriques. Vérifiez la conformité réglementaire locale concernant l’élimination approuvée et sûre de cet appareil. 5. Appuyez sur le bouton de filtrage sur le panneau de commande pour reprendre le fonctionnement normal. AS - Erreur du capteur d’humidité ES - Erreur du capteur de température P2 - Seau plein E3 - Dysfonctionnement du capteur Eb - Seau enlevé ou non dans la position correcte EC - Erreur du système de refroidissement ou erreur du capteur 16 DÉPANNAGE Danby soins du consommateur: 1-800-263-2629 Heures d’ouverture: Lundi à Jeudi 8 h 30 à 18 h, heure normale de l’Est Vendredi de 8 h 30 à 16 h, heure normale de l’Est Les informations contenues dans ce manuel sont sujettes à modification sans préavis. PROBLÈME L’appareil ne fonctionnera pas Déshumidification insuffisante CAUSE POSSIBLE • • • • • • • • • • • • • • La fiche n’est pas complètement insérée dans la prise murale Fusible soufflé ou disjoncteur L’humidité ambiante est inférieure à l’humidité définie Seau est plein ou pas dans la bonne position Le filtre à air est sale Flux d’air bloqué La taille de l’appareil est trop petite pour l’application L’humidité ambiante est inférieure à l’humidité définie Bruit • Le filtre à air est sale • • Seau n’est pas en bonne position • • La surface du plancher n’est pas de niveau Odeurs • Formation de moisissure sur des surfaces intérieures humides • • Placer un comprimé d’algaïcide dans le seau à eau L’eau sur le sol • Le raccord du tuyau est desserré • • Le couvercle de drainage a été retiré Accumulation de givre • Lorsque la température ambiante est inférieure à 5°C (41°F), la gelée peut se former • • Mettez l’appareil en mode ventilateur uniquement jusqu’à ce que le givre fond 17 LIMITED IN-HOME APPLIANCE WARRANTY GARANTIE LIMITÉE “EN ATELIER” Thisappareil quality product is warranted be free from manufacturer’s defectsdein matière material and workmanship, that the unit is utilisé useddans underles theconditions normal operating Cet de qualité est to garanti exempt de tout vice première et deprovided fabrication, s’il est normales conditions intended by the manufacturer. recommandées par le fabricant. This warranty is available only to the person to whom initial the unitde wasl’appareil originally soldvendu by Danby (Canada) or Danby Inc. (U.S.A.) (hereafter Cette garantie n’est offerte qu’à l’acheteur parProducts DanbyLimited Products Limited (Canada)Products ou Danby Products Inc. “Danby”) by an authorized distributor Danby, is non-transferable. (E.U.A.) or(ci-après « Danby ») ouofpar l’unand des ses distributeurs agréés et elle ne peut être transférée. CONDITIONS WARRANTY à partir de la date de l’achat, sans aucune prolongation Les pièces en plastique sont garanties pendant trente (30)TERMS joursOFseulement Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided. prévue. Premiers First Year 24 mois Pour obtenir un To obtain service Pendant premiers vingtany quatre (24) mois, pièces de ce or produit During the firstles twelve (12) months, functional parts of thistoutes productlesfound to be fonctionnelles defective, will be repaired replaced,qui s’avèrent at warrantor’s défectueuses réparées ou remplacées, selon le choix du garant, sans frais à l’acheteur initial. option, at no chargeseront to the ORIGINAL purchaser. Contactez le revendeur où l'appareil a été acheté ou contactez le dépôt de service Danby autorisé le plus Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any app liance proche, où le service doit être effectué par un technicien de service qualifié. Si le service est effectué sur Service requiring service outside the limited boundaries of “In Home Service” , i t will be the consumer’s responsibility to transport the appliance (at l'appareil par une personne autre qu'un dépôt de service autorisé, toutes les obligations de Danby en vertu de their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Serv ice” below. cette garantie seront annulées. Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service must be performed by a qualified service technician. Il est de la responsabilité de l'acheteur de transporter l'appareil vers le dépôt de service agréé le plus proche. If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial appli cation, all obligations of Danby under this warranty shall be void. Les frais de transport entre votre domicile et le lieu de l'entretien ne sont pas couverts par la présente garantie et doivent être acquittés par l'acheteur. Boundaries of If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be In Home Service delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualified and certif ied forou Aucune partie de la garantie ne prévoit implicitement que le fabricant sera tenu responsable des dommages subis par les aliments warranty service by Danby. Transportation charges to andde froml’appareil the service location notusage protected by this warranty and are t he d’autres types de contenu, qu’ils soient causés par la défectuosité ou parare son adéquat ou inadéquat. responsibility of the purchaser. EXCLUSIONS EnNothing vertu within de lathis présente, il n’existe aucune autre garantie,orcondition représentation, soit cexprimée de façon warranty shall imply that Danby will be responsible liable for anyouspoilage or damage to qu’elle food or other ontentsouoftacite, this appliance, whether due to any defect the appliance, or its use,Danby whetherou proper improper. agréés. De même, sont exclues toutes les autres garanties, conditions ou manifeste ouofintentionnelle, par ses ordistributeurs représentations, y compris les garanties, conditions ou représentations en vertu de toute loi régissant la vente de produits ou de toute EXCLUSIONS autre législation ou règlement semblables. En vertu de la présente, Danby ne peut être tenue responsable en cas de blessures corporelles des dégâts y compris à l’appareil, quelle qu’en soit les causes. ne peut pas tenue Save as hereinouprovided, Danby, matériels, there are no other warranties, conditions, representations or guarantees, express orDanby implied, m ade orêtre intended byresponsable Danby or its des dommages indirects fonctionnement défectueux or deguarantees, l’appareil. En achetant l’appareil, accepte ordeguarantees mettre à authorized distributors and all dus otherau warranties, conditions, representations including any warranties, conditio l’acheteur ns, representations couvert et Sale de of dégager de toute responsabilité en cas de réclamation toute blessure tout dégât matériel under any Goods ActDanby or like legislation or statue is hereby expressly excluded. Save as hereinpour provided, Danby shall nocorporelle t beou responsible for any damages causé par orcet appareil. to persons property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o f the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or propert y caused by the unit. CONDITIONS GÉNÉRALES La garantie ou assurance ci-dessus ne s’applique pas si les dégâts ou réparations sont dus aux cas suivants: GENERAL PROVISIONS 1) Panne de courant. No warranty or insurance herein contained or set out shall apply when damage repair is caused by any of the following: 2) Dommage subis pendant le transport ou le déplacement de or l’appareil. 1) Power failure. 3) Alimentation électrique incorrecte (tension faible, câblage défectueux, fusibles incorrects). 4) Accident, modification, emploi abusif ou incorrect de l’appareil tel qu'une circulation d'air inadéquate dans la pièce ou des 2) Damage in transit or when moving the appliance. conditions de fonctionnement anormales (température extrêmement élevéefuses. ou basse). 3) Improper power supply such as low voltage, defective house wiring or inadequate 5) Utilisation dans un but commercial ou industriel (à savoir, si l'appareil n'est pas installé dans un domicile résidentiel). 4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating con ditions 6) Incendie, dommages causés par l’eau, vol, guerre, émeute, hostilités, cas de force majeure (ouragan, inondation, etc.). (extremely high or low room temperature). 7) Visites d’un technicien pour expliquer le fonctionnement de l’appareil au propriétaire. 5) Use for commercial or industrial purposes encastrement (ie. If the applianced'un is notappareil installed inautoportant, a domestic residence). 8) Installation inappropriée (par exemple, ou utilisation extérieure d'un appareil non conçu à 6) yFire, water damage, hostility, of God such hurricanes, etc. ou ailleurs qui ne sont pas correctement isolés ou cet effet, compris, mais theft, sanswar, s'y riot, limiter: lesacts garages, lesaspatios, lesfloods porches climatisés). 7) Service calls resulting in customer education. 8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out door application). LaProof preuve de la date date sera requiseclaims; pourso,lesplease réclamations les isfactures required, de vente. Dans cas oùtounour of purchase willd'achat be required for warranty retain bills of de sale.garantie; In the eventConserver warranty service present thisledocument service de garantie est requis, présentez la preuve d'achat à notre dépôt de service agréé. AUTHORIZED SERVICE DEPOT. Warranty Service Service sous garantie In-home En Atelier Danby Products Limited Danby Products Limited PO 1778, Guelph, Ontario, N1H 6Z9 POBox Box 1778, Guelph, Ontario, Canada N1H Canada 6Z9 Téléphone : (519) 837-0920 Télécopieur: (519) 837-0449 Telephone: (519) 837-0920 FAX: (519) 837-0449 1-800-263-2629 1-800-263-2629 04/17 04/09 Danby Products Danby Products Inc. Inc. PO Box PO 669, Findlay, U.S.A. Box 669, Findlay,Ohio, Ohio, U.S.A. 45840 45840 Téléphone: (419) Telephone: 425-8627 (419) 425-8629 (419)Télécopieur: 425-8627 FAX: (419) 425-8629 Bienvenido Bienvenido a la familia Danby. Estamos orgullosos de nuestros productos de calidad y creemos en un servicio confiable. Sugerimos que lea este manual del propietario antes de conectar el nuevo aparato ya que contiene información importante sobre la operación, información de seguridad, solución de problemas y consejos de mantenimiento para garantizar la fiabilidad y longevidad de su electrodoméstico. Visite www.Danby.com para acceder a herramientas de autoservicio, preguntas frecuentes y mucho más. Para asistencia adicional, llame al 1-800-263-2629. Tenga en cuenta la información siguiente; Necesitará esta información para obtener un servicio bajo garantía. Debe proporcionar el recibo de compra original para validar su garantía y recibir servicio. Número de modelo: _____________________________________________ Número de serie: _______________________________________________ Fecha de compra: _______________________________________________ Necesitas ayuda? Antes de llamar al servicio, aquí hay algunas cosas que puede hacer para ayudarnos a servirle mejor. Lea este manual del propietario: Contiene instrucciones para ayudarle a usar y mantener su aparato correctamente. Si recibe un aparato dañado: Inmediatamente póngase en contacto con el minorista o el constructor que le vendió el aparato. Ahorre tiempo y dinero: Consulte la sección de solución de problemas al final de este manual antes de llamar. Esta sección le ayudará a resolver problemas comunes que pueden ocurrir. 1-800-26- Danby (1-800-263-2629) 19 Informacion de Seguridad Importante LEA Y SIGA TODAS LAS INSTRUCCIONES DE SEGURIDAD REQUERIMIENTOS DE SEGURIDAD INSTRUCCIONES DE CONEXION A TIERRA Este aparato no está diseñado para ser utilizado por personas (incluyendo niños) cuyas capacidades físicas, sensoriales o mentales sean diferentes o reducidas, o que carezcan de experiencia o conocimiento, a menos que dichas personas reciban supervisión o entrenamiento para operar el aparato por una persona responsable de su la seguridad. Este aparato debe estar conectado a tierra. La puesta a tierra reduce el riesgo de descarga eléctrica proporcionando un cable de escape para la corriente eléctrica. Los niños deben ser supervisados para asegurarse de que no juegan con el aparato. Para evitar el riesgo de descarga eléctrica, no utilice este deshumidificador en un área que pueda acumular agua estancada. Si se desarrolla esta condición, desconecte la fuente de alimentación antes de entrar en el agua. No almacene ni utilice materiales combustibles tales como gasolina u otros vapores o líquidos inflamables cerca de este o de cualquier otro aparato. No introduzca los dedos u otros objetos en las parrillas o aberturas del aparato. No cubra ni bloquee las aberturas de admisión y de escape. No opere el aparato sin el filtro instalado. No utilice el aparato cerca de fuentes de calor. Este aparato está destinado únicamente a aplicaciones interiores y residenciales. No utilice este deshumidificador en exteriores. No utilice este deshumidificador para aplicaciones comerciales o industriales. Este aparato tiene un cable que tiene un cable de conexión a tierra con un enchufe de 3 clavijas. El cable de alimentación debe estar enchufado en un tomacorriente que esté debidamente conectado a tierra. Si el tomacorriente es un tomacorriente de dos clavijas, debe ser reemplazado por un tomacorriente de 3 clavijas con conexión a tierra adecuada. La placa de características en serie indica el voltaje y la frecuencia para los que está diseñado el artefacto. ADVERTENCIA - El uso incorrecto del enchufe de conexión a tierra puede ocasionar un riesgo de descarga eléctrica. Consulte a un electricista calificado o agente de servicio si las instrucciones de conexión a tierra no se entienden completamente o si existe duda sobre si el aparato está debidamente conectado a tierra. No conecte el aparato a cables de extensión, adaptadores o junto con otro aparato en la misma toma de corriente. No empalme el cable de alimentación. No corte ni extraiga en ningún caso la tercera clavija de tierra del cable de alimentación. Si el cable de alimentación está dañado, debe ser reemplazado por el fabricante, su agente de servicio o persona calificada similar para evitar riesgos. ¡GUARDA ESTAS INSTRUCCIONES! 20 INSTRUCCIONES DE OPERACIÓN UBICACIÓN CARACTERISTICAS • Coloque el deshumidificador en un piso liso y nivelado que sea lo suficientemente fuerte para sostener el aparato con un cubo lleno de agua. Frente • Para mantener la eficiencia, haga funcionar el aparato en un lugar cerrado. Mantenga las puertas y ventanas cercanas cerradas. 1. 2. 3. 4. Salida de aire Panel de control Manijas (ambos lados) Cubo de agua 1 • Mantenga una distancia mínima de 20 cm (8 pulgadas) en los laterales y la parte posterior del aparato y de 40 cm (16 pulgadas) en la parte superior del aparato para permitir una circulación adecuada del aire. 2 3 • La temperatura de funcionamiento ambiente recomendada está entre 5°C (41°F) y 35°C (95°F). • No fuerce los rodillos para moverse sobre alfombras ya que el aparato puede volcarse y derramar agua. • Siempre que se coloque el aparato en la parte posterior o lateral, se debe permitir que se mantenga erguido durante 6 horas antes de enchufarlo para evitar daños a los componentes internos. 4 Espalda 1. Entrada de aire 2. Salida de drenaje continua 3. Banda de almacenamiento del cable de alimentación 4. Salida de drenaje de la bomba 5. Cable de alimentación 1 2 3 4 5 21 INSTRUCCIONES DE OPERACIÓN PANEL DE CONTROL 6. Botón de encendido • Utilice este botón para encender o apagar el aparato. 1. Botón de modo continuo y luz indicadora • Pulse este botón para activar el modo continuo. Esto ejecutará la función de deshumidificación continuamente. La luz indicadora se encenderá cuando el modo continuo esté activo. 7. Botón de la bomba y luz indicadora • Utilice este botón para activar la bomba de drenaje. La luz indicadora se iluminará cuando la bomba esté activa. 2. Botón del temporizador y luz indicadora • Utilice este botón para ajustar la función del temporizador. 8. Botón de deshumidificación inteligente y luz indicadora • Utilice este botón para activar el modo de deshumidificación inteligente. El modo de deshumidificación inteligente ajustará automáticamente la velocidad de la humedad y del ventilador en función de la temperatura ambiente y la humedad. La luz indicadora se iluminará cuando el deshumidificador inteligente esté activo. 3. Luz indicadora de descongelación • La luz indicadora de descongelación se ilumina cuando se ha acumulado escarcha en el interior del aparato. Esto puede indicar que la temperatura ambiente es demasiado fría. La función de deshumidificación cesará hasta que se derrita la helada. 4. Luz indicadora de cubo completo • La luz indicadora de cubo completo se iluminará cuando el cubo esté lleno de agua. Vacíe el cubo para reanudar el funcionamiento normal. 5. Pantalla y flechas arriba y abajo • La pantalla mostrará la humedad ajustada, la humedad ambiente o la función del temporizador. • Las flechas arriba y abajo pueden ajustar la humedad ajustada o el ajuste del temporizador. • La humedad se puede ajustar entre 35-85% en incrementos del 5%. Para un aire más seco, ajuste la humedad a un número más bajo. Para el aire del amortiguador, ajuste la humedad a un número más alto. • La visualización de la humedad ambiental es precisa dentro de +/- 5%. 2 9. Botón del ventilador y luz indicadora • Presione este botón para ajustar la velocidad del ventilador a baja o alta. Si el indicador luminoso está apagado, el ventilador está ajustado a baja velocidad. Si el indicador luminoso está encendido, el ventilador se ajusta a alta velocidad. 10. Botón del ventilador y luz indicadora • Presione este botón para ajustar la velocidad del ventilador a baja o alta. Si el indicador luminoso está apagado, el ventilador está ajustado a baja velocidad. Si el indicador luminoso está encendido, el ventilador se ajusta a alta velocidad. 11. Botón de modo de ionizador y luz indicadora • Utilice este botón para activar la función del ionizador. La luz indicadora se iluminará cuando el ionizador esté activo. 3 4 1 6 5 7 8 9 10 22 11 INSTRUCCIONES DE OPERACIÓN FUNCIÓN DEL TEMPORIZADOR REMOCION DE AGUA Función encendido automático Hay dos formas de eliminar el agua recogida del aparato. 1. Pulse el botón del temporizador hasta que se ilumine la luz indicadora de encendido automático. 2. Utilice las flechas arriba y abajo para seleccionar la cantidad de tiempo deseada antes de encender el aparato. Las flechas hacia arriba y hacia abajo sumarán o restarán 30 minutos de tiempo hasta 10 horas, luego a incrementos de 1 hora hasta un máximo de 24 horas. 3. La hora seleccionada aparecerá en el panel de visualización y contará hasta que el aparato se encienda. Función de apagado automático 1. Cubo de agua El deshumidificador automáticamente recogerá agua condensada en el cubo de agua. Cuando el cubo esté lleno, el compresor y el ventilador se apagarán y la luz indicadora de cubo completo se encenderá. 1. Presione el botón del temporizador hasta que se ilumine el indicador de apagado automático. 2. Utilice las flechas arriba y abajo para seleccionar la cantidad de tiempo deseada antes de encender el aparato. Las flechas hacia arriba y hacia abajo sumarán o restarán 30 minutos de tiempo hasta 10 horas, luego a incrementos de 1 hora hasta un máximo de 24 horas. 3. El tiempo seleccionado aparecerá en el panel de visualización y contará hasta que el aparato se apague. Uso automático de encendido y apagado simultáneamente Para vaciar el cubo, retírelo suavemente del aparato apretando ambos lados y tirando hacia afuera. Tenga cuidado al retirar el cubo, estará lleno y puede ser pesado. No coloque el cubo de agua directamente en el suelo. El fondo del cubo es desigual y se caerá y derramará el agua. Vacíe el cubo y vuelva a colocarlo en el aparato. El deshumidificador no funcionará sin el cubo instalado. Nota: Al retirar el cubo, el brazo de la bomba de drenaje puede caerse. Debe empujar suavemente hacia arriba de nuevo en la posición correcta antes de reemplazar el cubo. Las funciones de encendido automático y apagado automático se pueden utilizar al mismo tiempo, ajustando primero una y luego la otra. Ambas luces indicadoras se iluminarán y la pantalla contará hasta que el aparato se apague o se encienda, sea cual sea la función que haya sido configurada en primer lugar. Nota: El temporizador no encenderá y apagará el aparato indefinidamente. Los temporizadores auto on y auto off funcionarán una vez y luego el aparato volverá a su funcionamiento normal. Apagando el aparato, presionando el botón por defecto del mando a distancia o desenchufando el aparato se borrarán todos los ajustes de memoria, incluido el temporizador. FUNCIÓN DEL IONIZADOR La función del ionizador es una forma de purificación del aire que carga negativamente el aire. Las partículas de polvo, polen y otras partículas en el aire no pueden pasar a través del filtro cuando están cargadas negativamente. Esto asegura que la cantidad máxima de polvo y suciedad se eliminan del aire. Además, la función de ionizador ayuda a eliminar los olores no deseados del aire. 23 INSTRUCCIONES DE OPERACIÓN REMOCION DE AGUA REMOCION DE AGUA 2. Drenaje Continuo 3. Drenaje de la bomba El agua se puede retirar del aparato usando el drenaje continuo y una manguera de jardín estándar (no suministrada). Si el drenaje continuo es inconveniente, el agua puede ser retirada del aparato usando el drenaje de la bomba. Antes de usar cualquier función de drenaje automático, verifique que todos los puertos de drenaje estén limpios y libres de residuos. Hay un puerto de drenaje dentro del compartimento de la cubeta del aparato, retire el cucharón para verlo. Hay un puerto de drenaje en la parte posterior del aparato donde se conecta la manguera de drenaje. Todos los puertos de drenaje deben limpiarse con un limpiador de tuberías antes de su uso. Al utilizar la bomba, el aparato primero llenará el cubo de agua y luego el brazo de la bomba bombeará agua del cubo a través del drenaje y hacia fuera de la manguera. Nota: No limpie los puertos de drenaje con algo más rígido que un limpiador de tuberías ya que esto puede dañar el aparato. Nota: Si los puertos de drenaje están obstruidos o sucios, puede ocasionar fugas de agua desde el fondo del aparato. Retire la cubierta de la salida de drenaje continua y fije el extremo roscado hembra de la manguera de jardín a la parte posterior del aparato. Dirija el otro extremo de la manguera de jardín a un cubo o desagüe del piso. Asegúrese de que la manguera de jardín no está doblada y va hacia abajo desde la parte posterior del aparato. El drenaje continuo sólo se activa por gravedad, por lo que cualquier curva o movimiento ascendente en la manguera impedirá que el agua se drene. Retire la cubierta de la salida de drenaje de la bomba y coloque la manguera de desagüe suministrada. Dirija el otro extremo de la manguera a un desagüe. Presione el botón de la bomba para activar la función de la bomba. Cuando el cubo está lleno, la bomba comenzará a trabajar. Asegúrese de que la manguera de desagüe no esté doblada, esto puede impedir que el agua se drene correctamente y sobrecargar la bomba. No conecte la manguera suministrada junto con otra manguera. La longitud máxima de la manguera de drenaje de la bomba no debe ser mayor de 4,6 m (15 pies). Si la manguera de drenaje es demasiado larga, el agua puede no drenarse por completo, lo que puede provocar que el agua estancada y el moho se acumulen dentro de la manguera. Cuando se utiliza el drenaje de la bomba, el cubo de agua debe vaciarse cada pocos días para asegurarse de que el agua en el cubo no se estancan o crecen el moho. La manguera de jardín debe ser cortada de modo que no mida más de 1,8 m (6 pies) de largo. Si la manguera de drenaje es demasiado larga, el agua puede no drenarse por completo, lo que puede provocar que el agua estancada y el moho se acumulen dentro de la manguera. 24 CUIDADO Y MANTENIMIENTO FILTRO DE AIRE LIMPIEZA El filtro de aire debe limpiarse aproximadamente cada 2 semanas. El filtro de aire puede requerir una limpieza más frecuente si hay caspa o pelaje en el aire. Para evitar posibles descargas eléctricas, asegúrese de que el aparato esté desenchufado antes de realizar cualquier limpieza o mantenimiento. Aproximadamente cada dos semanas, la luz indicadora del filtro en el panel de control se iluminará como un recordatorio para limpiar el filtro. Siga los pasos que se indican a continuación para limpiar el filtro y volver a ponerlo en funcionamiento normal. 1. El filtro de aire se encuentra detrás de la rejilla de admisión trasera. Para quitar el filtro de aire, sujete la lengüeta del filtro en la parte inferior de la parrilla y deslícela hacia abajo. 2. Utilice una aspiradora con un accesorio de cepillo suave para eliminar los residuos grandes o acumulación de polvo del filtro de aire. 3. Lave el filtro en agua jabonosa tibia, por debajo de 40°C (104°F), o use un agente de limpieza neutro. 4. Enjuague el filtro con agua limpia y séquelo completamente antes de volver a instalarlo en el aparato. 5. Pulse el botón de filtro en el panel de control para reanudar el funcionamiento normal. Nota: No utilice el aparato sin el filtro de aire instalado. El exterior del aparato se puede limpiar con un paño suave o con un paño tibio y húmedo si es necesario. No utilice gasolina, benceno, diluyente o cualquier otro producto químico para limpiar este aparato ya que estas sustancias pueden dañar el acabado y la deformación de las piezas de plástico. Nunca vierta agua directamente sobre el aparato ya que esto causará el deterioro de los componentes eléctricos y el aislamiento del cableado. Asegúrese de que los puertos de drenaje en el interior del artefacto y los puertos de drenaje en la parte posterior del electrodoméstico estén libres de suciedad y acumulación de calcio. CUIDADO PARA EL FINAL DE LA TEMPORADA Antes de poner el aparato en servicio durante el año, haga funcionar el aparato en modo ventilador durante medio día para asegurarse de que el interior del aparato esté seco. Esto ayudará a evitar el crecimiento de moho o moho dentro del aparato. Asegúrese de que el filtro esté limpio y seco. Guarde el aparato cubierto en un lugar seco. CÓDIGOS DE ERROR DISPOSICIÓN Si el panel de visualización muestra alguno de los siguientes códigos de error, desenchufe el aparato, deje reposar durante 5-10 minutos y vuelva a enchufarlo. Si el error persiste, llame al servicio técnico. Este aparato no puede ser tratado como un residuo doméstico normal, sino que debe ser llevado al punto de recogida de residuos apropiado para el reciclaje de componentes eléctricos. Compruebe la conformidad reglamentaria local con respecto a la eliminación aprobada y segura de este aparato. AS - Error del sensor de humedad ES - Error del sensor de temperatura P2 - Cubo completo E3 - Funcionamiento incorrecto del sensor Eb - El cucharón quitado o no en la posición correcta EC - Error del sistema de refrigeración o error del sensor 25 SOLUCIÓN DE PROBLEMAS Danby cuidado del consumidor: 1-800-263-2629 Horas de operación: Lunes a Jueves 8:30 am - 6:00 pm Hora estándar del este Viernes 8:30 am - 4:00 pm Hora estándar del este La información de este manual está sujeta a cambios sin previo aviso. PROBLEMA El aparato no funcionará CAUSA POSIBLE • El enchufe no está completamente insertado en la toma de corriente de la pared • Fusible fundido o disyuntor • La humedad ambiente es menor que la humedad ajustada • El cubo está lleno o no está en la posición correcta Insuficiente deshumidificación • El filtro de aire está sucio • Flujo de aire bloqueado • El tamaño del dispositivo es demasiado pequeño para la aplicación • La humedad ambiente es menor que la humedad ajustada Ruido • El filtro de aire está sucio • El cucharón no está en la posición adecuada • Superficie del piso no nivelada Olores • Formación de moho o moho en superficies mojadas internas • Coloque una tableta algicida en el cubo de agua Agua en el piso • La conexión de la manguera está suelta • Se ha quitado la tapa del drenaje Acumulación de escarcha • Cuando la temperatura ambiente es inferior a 5°C (41°F) puede formarse escarcha • Cambie el aparato al modo ventilador sólo hasta que se derrita el hielo 26 GARANTÍA LIMITADA “ACARREADO LIMITED IN-HOME APPLIANCESOLAMENTE” WARRANTY Este de calidad contra defectos de fabricación, incluyendo mano obra, siempre y cuando Thisproducto quality product is warrantedestá to begarantizado free from manufacturer’s defects in material and workmanship, providedpartes that theyunit is deused under the normal operating la unidad se intended utilice bajo condiciones normales de funcionamiento para las que fue diseñado. conditions by thelas manufacturer. Esta solamente para quesold haya comprado esta unidad directamente de Danby Thisgarantía warranty isestá available only to thedisponible person to whom the la unitpersona was originally by Danby Productsoriginalmente Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter Products (Canada)distributor o Danby Products (U.S.A.) (en adelante “Danby”) o uno de sus distribuidores autorizados, y no es “Danby”) Limited or by an authorized of Danby, and isInc. non-transferable. transferible. CONDICIONES DE LA GARANTÍA TERMS OF WARRANTY Las piezas plásticas, se autorizan por treinta (30) días solamente a partir de la fecha de la compra, sin las extensiones Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided. proporcionadas. Primeros First Year 24 meses Durante lostwelve primeros veinticuatro (24)parts meses, parte buen will estado de este producto que resulte During the first (12) months, any functional of thiscualquier product found to been defective, be repaired or replaced, at warrantor’s defectuosa, incluyendo cualquier sistema sellado, será reparado o reemplazado, a opción del fabricante, sin option, at no charge to the ORIGINAL purchaser. cargo para el comprador original. To obtain reservesenthecontacto right to limit theelboundaries of “In Home Service” to the el proximity of an AuthorizedoService Depot.enAny app liance Póngase con distribuidor donde adquirió electrodoméstico póngase contacto con el Para obtener servicio Danby Service requiring outside the limited boundaries of “In Home , donde it will beeltheservicio consumer’s responsibility to transport centroservice de servicio autorizado más cercano deService” Danby, debe ser realizado portheunappliance técnico(at their own expense)Sitoeltheservicio original retailer (point of purchase) or a servicepersona depot forque repair.noSeesea “Boundaries of In Home Serv ice” below. cualificado. es realizado por cualquier un depósito de servicio autorizado, Contact from whom de yourDanby unit wasbajo purchased, contact your nearest authorized Danby service depot, where service todasyour lasdealer obligaciones estaorgarantía serán nulas. must be performed by a qualified service technician. Es responsabilidad comprador transportar el aparato centro deunit servicio autorizado If service is performed on thedel units by anyone other than an authorized servicealdepot, or the is used for commercialmás appli cercano. cation, all obligations of Danby under this warranty shall be void. Los cargos de transporte desde y hacia el lugar de servicio no están protegidos por esta garantía y son responsabilidad del comprador. Boundaries of If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be In Home Service delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualified and certif ied for Nada dentro de esta garantía implica que Transportation Danby serácharges responsable por daño queprotected hayanbysufrido los alimentos warranty service by Danby. to and from thecualquier service location are not this warranty and are t u otros he contenidos de este aparato, ya sea a un defecto del aparato, o su uso, adecuado o inadecuado. responsibility of thedebido purchaser. EXCLUSIONES Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other c ontents of this appliance, whether due Salvo lo aquí indicado por Danby, no existen otras garantías, condiciones o representaciones, explícitas o implícitas, concretas o to any defect of the appliance, or its use, whether proper or improper. intencionales por parte de Danby o sus distribuidores autorizados y todas las demás garantías, condiciones o representaciones, incluyendo cualquier garantía, condiciones o representaciones bajo cualquier Acta de Venta de Productos o legislación o estatuto EXCLUSIONS similar, quedan de esta forma expresamente excluidas. Salvo lo aquí indicado, Danby no serán responsables por ningún daño a Save as herein provided, Danby, there are no other warranties, conditions, representations or oguarantees, express or implied, m causado ade orpor intended by Danby or itsde la personas o bienes, incluyendo la propia unidad, sin importar su causa, de ningún daño indirecto el desperfecto authorized distributors andesta all other warranties, conditions, representations guarantees, including any warranties, conditioa Danby ns, representations or guarantees unidad, y al comprar unidad, el comprador acepta pororla presente, indemnizar y proteger contra cualquier reclamo under any Sale of Goods Actoorbienes like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall no t be responsible for any damages por daños a personas causados por la unidad. to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or propert CONDICIONES GENERALES f the unit and by the purchase of y caused by the unit. No se considerará ninguna de estas garantías o seguros cuando el daño o la necesidad de reparación sea el producto de los siguientes casos: GENERAL PROVISIONS 1) Falla del suministro eléctrico. No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following: 2) Daños en tránsito o durante el transporte de la unidad. 1) Power failure. 3) Alimentación incorrecta, como bajo voltaje, instalación eléctrica defectuosa o fusibles inadecuados. 4) Accidente, modificación, abuso o the usoappliance. incorrecto del artefacto, tal como insuficiente ventilación del ambiente o condiciones de 2) Damage in transit or when moving operación anormales (temperatura ambiente extremadamente o baja).fuses. 3) Improper power supply such as low voltage, defective house wiring alta or inadequate 5) Utilización comercial o industrial (v.g., si el electrodoméstico no está instalado en una vivienda particular). 4) Accident, abuserobo, or misuse of the appliance such hostilidades, as inadequate airactos circulation the room or abnormal con inundaciones, ditions 6) Incendio, dañosalteration, por agua, guerra, disturbios, de infuerza mayor comooperating huracanes, etc. high ordebido low roomatemperature). 7) Pedidos(extremely de servicio desinformación del usuario. 8) Instalación inadecuada instalación unappliance electrodoméstico o uso de un aparato al aire libre que no esté 5) Use for commercial or(v.g., industrial purposes (ie.de If the is not installedindependiente in a domestic residence). aprobado para aplicaciones pero no limitado 6) Fire, water damage, theft,en war,exteriores, riot, hostility,incluyendo acts of God such as hurricanes, floodsa: etc.garajes, patios, porches o cualquier lugar que no esté bien aislado o controlado por el clima). 7) Service calls resulting in customer education. 8) Improper (ie.la Building-in of acompra free standing appliance or using an appliance outdoorsconservar that is not approved for out de venta. door application). Se requerirá una Installation prueba de fecha de para reclamaciones de garantía; las facturas En el caso de que seProof requiera servicio debegarantía, el comprobante depósito autorizado. of purchase date will required forpresente warranty claims; so, please retainde billscompra of sale. Inathenuestro event warranty servicedeis serviciorequired, present this document to our AUTHORIZED SERVICE DEPOT. Danby Products Limited PO Box Products 1778, Guelph, Ontario, Canada N1H 6Z9 Danby Limited Telephone: (519) 837-0920 FAX:Ontario, (519) 837-0449 PO Box 1778, Guelph, Canada N1H 6Z9 Telephone: (519) 837-0920 FAX: (519) 837-0449 Warranty Service In-home Servicio de Garantía Acarreado Solamente 1-800-263-2629 1-800-263-2629 04/17 04/09 Danby Products Inc. PO Box 669, Findlay, Ohio, U.S.A. Products 45840 Danby Inc. Telephone: (419)Findlay, 425-8627 FAX: (419)U.S.A. 425-862945840 PO Box 669, Ohio, Telephone: (419) 425-8627 FAX: (419) 425-8629 NOTES / REMARQUES / NOTAS : __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ NOTES / REMARQUES / NOTAS : __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ NOTES / REMARQUES / NOTAS : __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ MODEL MODEL •• MODÈLE MODÈLE •• MODELO MODELO DDR095BDPWDB Printed in China Imprimé en Chine Impreso en China Danby Products Limited, Guelph, ON, Canada N1H 6Z9 Danby Products Inc., Findlay, Ohio, USA 45840
1 / 1

Danby DDR095BDPWDB El manual del propietario

Categoría
Deshumidificadores
Tipo
El manual del propietario