Rockford Fosgate Punch HE RFP3808 Installation & Operation Manual

Tipo
Installation & Operation Manual
1
RFP3408/3808
RFP3410/3810
RFP3412/3812
RFP3415/3815
Installation
& Operation
Páginas de Referencia para la Instalación
Schéma d’Installation
Installations Beiblatt
Istruzioni di Installation
If, after reading your manual, you still have questions regarding this product, we
recommend that you see your Rockford Fosgate dealer. If you need further assis-
tance, you can call us direct at 1-800-669-9899. Be sure to have your serial num-
ber, model number and date of purchase available when you call.
The serial number can be found on the outside of the box. Please record it in the
space provided below as your permanent record. This will serve as verification of
your factory warranty and may become useful in recovering your speaker if it is ever
stolen.
Serial Number: __________________________________
Model Number:__________________________________
– i –
Sections marked
TROUBLESHOOTING
include recommendations for
curing installation problems
Sections marked
INSTALLATION
include “slam dunk”
wiring connections
Welcome to Rockford Fosgate! This manual is designed to provide informa-
tion for the owner, salesperson and installer. For those of you who want
quick information on how to install this product, please turn to the
Installation Section of this manual or refer to the icons listed below. Other
information can be located by using the Table of Contents. We, at Rockford
Fosgate, have worked very hard to make sure all the information in this
manual is current. But, as we are constantly finding new ways to improve
our product, this information is subject to change without notice.
GETTING STARTED
I
N
S
T
A
L
L
A
T
I
O
N
+ -
+ -
TROUBLE-
S
H
O
O
T
I
N
G
Visit our website for the latest information on all Rockford products.
Dear Customer,
C
ongratulations on your purchase of the world's finest brand of car audio
speakers. At Rockford Fosgate we are fanatics about musical reproduction
at its best, and we are pleased you chose our product. Through years of en-
gineering expertise, hand craftsmanship and critical testing procedures, we
have created a wide range of products that reproduce music with all the
clarity and richness you deserve.
For maximum performance we recommend you have your new Rockford
Fosgate product installed by an Authorized Rockford Fosgate Dealer, as we
provide specialized training through Rockford Technical Training Institute
(RTTI). Please read your warranty and retain your receipt and original car-
ton for possible future use.
Great product and competent installations are only a piece of the puzzle
when it comes to your system. Make sure that your installer is using 100%
authentic installation accessories from Connecting Punch in your installa-
tion. Connecting Punch has everything from RCA cables and speaker wire
to Power line and battery connectors. Insist on it! After all, your new system
deserves nothing but the best.
To add the finishing touch to your new Rockford Fosgate image order your
Rockford wearables, which include everything from T-shirts and jackets to
hats and sunglasses.
To get a free brochure on Rockford Fosgate products and Rockford wear-
ables, in the U.S. call 480-967-3565 or FAX 480-967-8132. For all other
countries, call +001-480-967-3565 or FAX +001-480-967-8132.
PRACTICE SAFE SOUND™
CONTINUOUS EXPOSURE TO SOUND PRESSURE LEVELS OVER 100dBMAY
CAUSE PERMANENT HEARING LOSS
. HIGH POWERED AUTOSOUND SYSTEMS
MAY PRODUCE SOUND PRESSURE LEVELS WELL OVER
130dB. USE COMMON
SENSE AND PRACTICE SAFE SOUND
.
ii
iii
Specifications
RFP3408 RFP3808 RFP3410 RFP3810 RFP3412 RFP3812 RFP3415 RFP3815
Fs (Hz) 41 40 32 34 28 29 24 23
Re (Ohms) 3.88 7.73 3.73 7.42 3.69 7.37 3.69 7.46
Le (mH) 3.63 6.14 4.42 7.38 4.48 7.48 4.64 7.53
Qts 0.478 0.529 0.447 0.507 0.472 0.533 0.537 0.554
Qes 0.517 0.588 0.481 0.554 0.510 0.584 0.581 0.608
Qms 6.234 5.273 6.255 5.919 6.237 6.085 7.215 6.190
Vas (Liters) 14.0 15.4 31.5 31.1 86.4 86.3 199.2 244.3
Vas (cuft) 0.49 0.54 1.11 1.10 3.05 3.05 7.04 8.63
SPL (db M/W) 84.9 84.4 85.4 85.7 87.6 87.6 89.1 89.1
XMAX (in) 0.31 0.31 0.51 0.51 0.51 0.51 0.51 0.51
XMAX (mm) 8 8 13 13 13 13 13 13
Power handling (RMS) 200 200 200 200 200 200 200 200
Power handling (Peak) 400 400 400 400 400 400 400 400
Speaker displacement 0.035 0.035 0.06 0.06 0.085 0.085 0.135 0.135
Sealed Box (cu. ft.) 0.3 0.3 0.75 0.75 1.25 1.25 2.5 2.5
Ported box (cu. ft.) 0.6250.62511222.52.5
Mounting diameter (in) 7-1/16 7-1/16 9-5/16 9-5/16 11-1/8 11-1/8 13-7/8 13-7/8
Mounting diameter (mm) 179 179 237 237 283 283 352 352
Mounting depth (in.) 3-13/16 3-13/16 5-3/8 5-3/8 5-13/16 5-13/16 7-3/16 7-3/16
Mountin
g
depth
(
mm
)
97 97 137 137 148 148 183 183
1
Table of Contents
Specifications........................................................................................................iii
Introduction ..........................................................................................................2
RF Punch HE Woofer Contents ..............................................................................2
Recommended Enclosures ....................................................................................2
Installation ............................................................................................................4
Recommended Enclosures ..............................................................................4
Building An Enclosure ....................................................................................6
Calculating Volume ........................................................................................6
Subwoofer Crossovers......................................................................................6
Wiring Configurations......................................................................................7
Warranty Information ............................................................................................8
International Information ......................................................................................9
2
Introduction
The RF Punch HE Woofers are a full line of low frequency drivers sized
from 8" to 15" and are available in 4 or 8 ohm impedance. The RF Punch
HE woofers were designed for use primarily in small, sealed or ported
enclosures. By utilizing the latest materials and construction techniques,
we are able to offer a speaker with high output at low frequencies while
requiring a minimum of operating space.
RF Punch Woofer Contents
RF Punch HE Woofer
Installation & Owner's Manual
Recommended Enclosures
This manual outlines 2 specific types of enclosures that provide distinctly
different performance. This section is to help you decide which type is best
for your application.
Sealed
Sealed enclosures are the simplest to build. The most important part of
building a sealed enclosure is to make sure that the enclosure is airtight.
Using glue and some type of sealant on all seams will ensure solid con-
struction and prevent air leaks. The box volume will directly impact the
performance of the speaker. Larger enclosure will provide flatter response
and deeper bass where smaller boxes will provide a bump in the response
curve and generally higher output for greater SPL.
Advantages of sealed enclosures
Small enclosures
Linear (Flat) response
No port noise
High power handling at all frequencies
Excellent for sound quality
I
N
S
T
A
L
L
A
T
I
O
N
+ -
+ -
3
Recommended Enclosures
Vented Enclosures:
Vented enclosures vary only from the sealed enclosures in that a vent or
port is added to tune the enclosure. The enclosures recommended are
designed for great overall performance. Larger boxes tend to be easy to
tune to lower frequencies while medium and small boxes are easier to tune
to higher frequencies. The vented design is less linear in response than the
sealed box with noticeably more output at the tuning frequenc
y.
Advantages of vented enclosures
Higher average output than sealed
Tuning frequency can be easily adjusted by changing port length
Deep bass response with lower power requirements
Great for high output with limited power
I
N
S
T
A
L
L
A
T
I
O
N
+ -
+ -
4
Recommended Enclosures
Punch 8"
Recommended Sealed .30ft
3
(8.50L)
D = 8"
(20.32cm)
H = 11"
(27.94cm)
W = 11"
(27.94cm)
Punch 10"
Recommended Sealed .75ft
3
(21.24L)
D = 10"
(25.40cm)
H = 14"
(35.56cm)
W = 15"
(38.10cm)
Punch 12"
Recommended Sealed 1.25ft
3
(35.40L)
D = 12"
(30.48cm)
H = 14"
(35.56cm)
W = 19-3/4"
(50.17cm)
D = 8"
(20.32cm)
H = 11"
(27.94cm)
W = 19.75"
(50.16cm)
Range in Cubic Feet
1 2 3 4 5 6
.50
.625
0.3
D = 13.5"
(34.29cm)
H = 13"
(33.02cm)
W = 15"
(38.1cm)
Range in Cubic Feet
1 2 3 4 5 6
0.3
.75
D = 14"
(35.56cm)
H = 18"
(45.72cm)
W = 20.5"
(52.07cm)
Range in Cubic Feet
1 2 3 4 5 6
0.3
1.50
Range in Cubic Feet
1 2 3 4 5 6
0.3
.50
1.50
Range in Cubic Feet
1 2 3 4 5 6
0.3
1.25
1.75
Recommended Ported .625ft
3
(17.70L)
Recommended Ported 1.0 ft
3
(28.32L)
Recommended Ported 2.0 ft
3
(56.63L)
Fb = 40 Hz
Pd = 2.5" (6.35cm)
Pl = 11.25" (28.57cm)
Fb = 35 Hz
Pd = 3" (7.62cm)
Pl = 13.25" (33.65cm)
Fb=35 Hz
Pd=4" (10.16cm)
Pl=10.75" (27.30cm)
Installation
I
N
S
T
A
L
L
A
T
I
O
N
+ -
+ -
5
Punch 15"
Recommended Sealed 2.5ft
3
(70.79L)
D = 12"
(30.48cm)
H = 20"
(50.80cm)
W = 25"
(63.50cm)
Range in Cubic Feet
1 2 3 4 5 6
0.3
1.75
2.50
D = 12"
(44.45cm)
H = 20"
(43.18cm)
W = 25"
(48.26cm)
Range in Cubic Feet
1 2 3 4 5 6
0.3
7
5
5
0
Recommended Enclosures
Recommended Ported 2.5ft
3
(70.79L)
Fb = 35 Hz
Pd = 4" (10.16cm)
Pl = 8" (20.32cm)
Recommended Enclosures
I
N
S
T
A
L
L
A
T
I
O
N
+ -
+ -
6
Building an Enclosure
To work properly, the walls of the enclosure must be rigid and not flex
when subjected to the high pressures generated by the speaker's operation.
For optimum performance, we recommend using 3/4" MDF (Medium
Density Fiberboard) and internal bracing. The enclosure should be glued
together and secured with nails or screws. MDF is porous; therefore, it is
suggested to also seal the outside walls with polyurethane.
Calculating Volume
Calculating volume is merely a matter of measuring the dimensions in
inches and using the formula:
1728"/(cu in/cu ft)
Height x Width x Depth
Box Volume=
(cubic feet)
If two facing sides are of uneven length, add them together and divide by
two to take the average. Using this number will give you the volume with-
out the necessity of calculating the box in sections and adding the sections
together. The thickness of the baffle material reduces the internal volume
so this must be subtracted from the outside dimensions to determine the
internal volume. The speaker itself also reduces the internal volume. The
amount of air displaced by each model is listed on the specification sheet
and should also be subtracted from the gross volume calculation.
Subwoofer Crossovers
There are two operational types of crossovers, passive and active. Passive
crossovers (coils or inductors) are placed on the speaker leads between the
amplifier and speaker. An active crossover is an electronic filter which sep-
arates the audio signal fed to different amplifiers.
For optimum subwoofer
performance, we recommend using an active 80-100Hz low-pass
crossover at 12dB/octave.
7
Wiring Configurations
Three configurations for connecting speakers to an amplifier are Series,
Parallel, and Series-Parallel wiring. A Series configuration consists of two
or more speakers wired in an string (end to end). A Parallel configuration
consists of two or more speakers wired with the common terminals con-
nected across each other. A Series-Parallel configuration is a combination
of both methods. Determine which method will be compatible with your
amplifier.
11111
=++++ etc.
R
T
R
1
R
2
R
3
R
4
Series Wiring
Parallel Wiring
+
+
+
+
4
+
+
R
T
indicates the total speaker load
R
1
, R
2
, etc. indicates each speaker in the system
Series-Parallel Wiring
I
N
S
T
A
L
L
A
T
I
O
N
+ -
+ -
R
T=
R
1+
R
2+
R
3+
R
4
4 load 4 load
+ +
+
8 load
8 load 8 load
+ +
+
4 load
8
Limited Warranty Information
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:
Length of Warranty
1 year on speakers 30 days on speaker B-stock (receipt required)
3 years on electronics 90 days on electronic B-stock (receipt required)
2 years on source units
What is Covered
This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford
Fosgate Dealers in the United States of America or its possessions. Product purchased by consumers
from an Authorized Rockford Fosgate Dealer in another country are covered only by that countrys
Distributor and not by Rockford Corporation.
Who is Covered
This warranty covers only the original purchaser of Rockford product purchased from an Authorized
Rockford Fosgate Dealer in the United States. In order to receive service, the purchaser must provide
Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and
date of purchase.
Products found to be defective during the warranty period will be repaired or replaced (with a prod-
uct deemed to be equivalent) at Rockford's discretion.
What is Not Covered
1. Damage caused by accident, abuse, improper operations, water, theft
2. Any cost or expense related to the removal or reinstallation of product
3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center
4. Any product which has had the serial number defaced, altered, or removed
5. Subsequent damage to other components
6. Any product purchased outside the U.S.
7. Any product not purchased from an Authorized Rockford Fosgate Dealer
Limit on Implied Warranties
Any implied warranties including warranties of fitness for use and merchantability are limited in dura-
tion to the period of the express warranty set forth above. Some states do not allow limitations on the
length of an implied warranty, so this limitation may not apply. No person is authorized to assume for
Rockford Fosgate any other liability in connection with the sale of the product.
How to Obtain Service
Please call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return
Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of
product to Rockford.
Ship to:
Speakers
Rockford Acoustic Design
(Receiving-speakers)
609 Myrtle N.W.
Grand Rapids, MI 49504
RA#:_________________
Ship to:
Electronics
Rockford Corporation
Warranty Repair Department
2055 E. 5th Street
Tempe, AZ 85281
RA#:_________________
9
LEA DETENIDAMENTE LAS SIGUIENTES INSTRUCCIONES DE INSTA-
LACÍON DEL PRODUCTO.
Los terminales positivo y negativo de entrada están ubicados uno en cada
extremo de la carcasa. Este montaje separado previene de posibles corto-
circuitos de la señal a altos niveles de volumen. El terminal positivo está
marcado con un punto en la carcasa. Un punto rojo indica que la imped-
ancia del altavoz es de 8 ohmios, y un punto violeta que es de 4 ohmios.
Introduccíon
Los woofers RF Punch HE son una gama completa de drivers de baja fre-
cuéncia que comprenden diámetros de 8" a 15". Los Woofers RF Punch HE
fueron diseñados para su utilización en caja cerrada o bass-reflex mediana.
Diseñada para ofrecer la máxima calidad, los Woofers RF ofrecen al entu-
siasta principiante en sistemas de car audio, la oportunidad para disfrutar
de un bajo sólido en las bajas frecuéncias. Nuestros ingenieros han selec-
cionado materiales y técnicas para la construcción de nuestros altavoces
con el objetivo de ofrecer características y confianza comparable a otros
altavoces vendidos much más caros.
Terminales De Entrada
ESPAÑOL
Calculo Del Volumen
Para calcular el volumen sólo se han de medir las dimensiones en cen-
timetros y aplicar la fórmula:
Volumen du
la caja =
Si dos caras opuestas son de diferente tamaño, súmelas y divida el total por
dos para obtener el promedio. Usando esta técnica se ahorrara el cálculo
por secciones. El espesor del material con que está construida la caja
reduce el volumen interno, de manera quer ha de restarse de las dimen-
siones exteriores para determinar el volumen interior. La cantidad de aire
que ocupa cada modelo viene especificado en la hoja de caracteristicas y
también debe sustraerse para obtener el volumen neto interior.
1000cc
3
/litros
Alto (cm) x Ancho (cm) x Profundidad (cm)
(en litros)
10
Para un buen funcionamiento las paredes del recinto han de ser rigidas y
sin flexión a altas presiones de aire. Recomendamos usar un espesor de 1.9
cm de conglomerado de alta densidad o fibra de media densidad. Si el
recinto es muy grande es necessario reforzarlo internamente. Las juntas
deben ser encoladas y aseguradas con tornillos o grapas. Internamente las
juntas deben ser selladas con silicona para prevenir las fugas de aire. La
cola para madera es la mejor opción. Debido a la porosidad del conglom-
erado de alta densidad y la fibra es recomendable sellar exteriormente la
caja con poliuretano.
Construccion De Un Recinto
ESPAÑOL
11
VEUILLEZ LIRE LES INSTRUCTIONS SUIVANTES POUR L'INSTALLA-
TION DE CE PRODUIT.
Les bornes positives et négatives sont fixées de part et d'autre du saladier.
Cette séparation permet d'empêcher les courts-circuits entre les fils lors des
reproductions sonores élevées. La borne positive est repérée par un petit
point de couleur sur le saladier. Un point rouge est utilisé pour les haut-
parleurs de 8, un point violet pour les haut-parleurs de 4.
Introduction
Les woofers RF Punch HE sont une gamme complète de haut-parleurs de
graves allant de 20 à 46 cm et disponibles en 4 ou 8.
Les woofer RF
Punch HE ont été conçus pour être utilisé de préférence en enceintes clos-
es.
En utilisant les techniques et les matériaux de construction les plus récents,
nous sommes parvenus à construire un haut-parleur fournissant un rende-
ment élevé dans les graves tout en requérant un volume opérationnel min-
imum.
BORNIERS
FRANÇAIS
Calcul Du Volume
On calcule le volume en mesurant la dimension de chaque côté et en util-
isant la formule suivante:
Volume du
caisson =
(Litres)
Si les due côtés qui se font face n'ont pas la même longueur, additionnez
les et divisez le résultat par deux pour obtenir la moyenne des deux
longueurs. Utilisez le nombre ainsi obtenu dans la formule pour détermin-
er le litrage. Cette méthode permet d'obtenir le volume du caisson sans
devoir faire de calculs compliqués de section de volume. L'épaisseur du
matériau dont est fait le caisson réduit le volume interne de celui-ci.
Lorsqu'on mesure les côtés du caisson il ne faut donc pas oublier d'oter des
mesures l'epaisseur du matériau. Le haut-parleur lui-même diminue le vol-
ume interne du caisson. Le volume d'air déplacé par chaque modèle de
haut-parleur est repris dans les spécifications techniques et doit également
être soustrait du volume total.
1000cc
3
/litres
Hauteur (cm) x Longueur (cm) x Largeur
(cm)
12
Pour fonctionner convenablement les parois du caisson doivent être rigides
lorsqu'elles sont soumises aux hautes pressions dues au fonctionnement du
haut-parleur. Nous vous recommandons d'utiliser des panneaux de bois
aggloméré à haute ou moyenne densité de particules de type MDF. Ces
panneaux sont disponibles dans la plupart des magasins de bricolage. Pour
un caisson de grand volume il est recommandé de placer des renforts à l'in-
térieur du caisson. Les différents côtés devront être collés (colle à bois) et
vissés (ou éventuellement cloués). Il est recommandé de mettre un joint de
silicone dans les arêtes internes du caisson afin d'éviter les fuites d'air. Du
fait de la porosité des matériaux que nous vous conseillons il est préférable
de recouvrir l'extérieur du caisson avec du polyuréthane.
Construire Un Caisson
FRANÇAIS
13
Anschlubterminals
BITTE LESEN SIE DIESE GEBRAUCHSANLEITUNG ZUERST SORGFÄLTIG
DURCH. DAS KANN SIE VOR FALSCHEM EINSATZ, AUSFALLEN ODER
SOGAR BESCHÄDIGUNG DES PRODUKTES ODER IHRES FAHRZEUGES
SCHÜTZEN.
Einleitung
Die RF-Punch HE Woofer sind eine komplette Produktlinie von Tief-
Frequenzlautsprechern mit Durchmesser von 20 cm bis zu 46 cm,
erhältlich in der Impendanz 4 - und 8 Ohm (Die RF Punch HE Woofer wur-
den vorwiegend fur den Einsatz in geschlossenen Gehäuse konstruiert).
Durch die Verwendung neuester Materialien und Produktionstechniken
können wir Ihnen heute einen Lautsprecher vorstellen, der hohe
Lautstärken und tiefe Frequenzen selbst in sehr kleinen Volumen repro-
duzieren kann.
Die Anschluβterminals wurden auf jeder Seite des Lautsprecherkorbes posi-
tioniert um eventuelle Kurzschlüsse auch bei hoher Leistung
auszuschlieβen (Das Positiv-Terminal ist durch eine Farbmarkierung geken-
zeichnet). Eine rote Farbamrkierung befindet sich immer bei einem
Lautsprecher mit einer Impedanz von 8 Ohm, eine violette Farbmarkierung
zeichnet die Lautsprecher mit der Impedanz 4 Ohm.
DEUTSCH
Volumen-Berechnung
Sollten zwei gegenüberliegende Seiten ungleich lang sein, so können sie
die Maβe zusammen rechnen und durch zwei dividieren um den
Durchschnitt zu erhalten. Dies macht Ihnen die Berechnung leichter und
Sie müssen das Gehäuse nicht in Sektionen berechnen, die Sie danach
wieder mühselig zusammen zählen müssen. Die Materialstärke beeinflu
βt
natürlich auch das Innen-Volumen, so muss für eine präzise Berechnung
die Materialstärke von Au
βen-Volumen abgezogen werden. Der
Lautsprecher verringert ebenfalls das Innen-Volumen, auch er sollte natür-
lich heraus gerechnet werden. Jedes Lautsprecher-Volumen ist unter
Specifications genau aufgelistet.
Gehäuse-
Volumen =
1000cc
3
/Kubik liter
Höhe (cm) x Breite (cm) x Tiefe (cm)
(Kubik Liter)
Zur Volumen-Berechung benötigen sie die genauen Maβe und
Dimensionen in Zentimetern.
14
Um das Gehäuse so präzise wie möglich zu bauen, sollten die
Gehäusewände sehr steif und luftundurchlässig sein, um dem entsehenden
Luftdruck des Lautsprechers standhalten zu können. Wir empfehlen 1,9 cm
mittelverdichtete Faserplatte (MDF), die in den meisten Baumärkten ange-
boten wird. Bei einem grö
βeren Gehäuse sollten Sie Versteifungen durch
Holzbalken montieren. Diese sollten wie auch das gesamte Gehäuse
mit Holzleim geklebt und verschraubt oder vernagelt sein. Um eine höhere
Dichte zu erreichen, empfiehlt es sich, die Kanten und Verschraubungen
mit Silikon abzudichten und das Gehäuse von innen mit einer
Hohlraumversiegelung zu behandeln.
Der Gehäuse Bau
DEUTSCH
15
LEGGERE CON ATTENZIONE LE SEGUENTI ISTRUZIONI PRIMA DEL-
L'INSTALLAZIONE DEL PRODOTTO.
I connettori di ingresso positivi e negativi sono montati sul cestello in
posizioni speculari. Il montaggio separato impedisce al segnale musicale di
cortocircuitarsi ad altissimi livelli di volume. (Il terminale di ingresso é indi-
cato da una marcatura colorata sul cestello.) Un contrassengno rosso indi-
ca che l'impedenza dell'altoparlante é 8 ohm, il contrassegno viola é imp-
iegato per i 4 ohm.
Introduzione
I woofer RF Punch HE sono una linea completa di altoparlanti per basse fre-
quenze con diametri che vanno da 20 a 46 cm e disponibili sia a 4 che a
8 ohm. (I woofer RF Punch HE sono progettati per il funzionamento princi-
pale in cassa chiusa.). Impiegando le piú aggiomate tecnologie e materiali,
siamo in grado di offrire altoparlanti che possono riprodurre un'elevata
pressione sonora alle basse frequenze mantenendo i volumi di impiego
assolutamente ridotti.
CONNESSIONI DI INGRESSO
ITALIANO
Calcolo del Volume
Calcolare il volume é essenzialmente solo un problema di misurazione
delle dimensioni in centimetri della cassa e di applicazione della formula:
Volume della
cassa =
(litri)
1000cc
3
/litri
Alteza (cm) x Larghezza (cm) x Profonditá (cm)
Se due pareti parallele sono di dimensioni diverse (prisma), semplicemente
sommatele e dividete il risulto per due. Impiegando il risultato ottenuto
potete calcolare il volume senza dividere la cassa i sezioni. Lo spessore del
legno riduce il volume interno, per cui é necessario sottrario dalle dimen-
sioni esterne. Anche il volume dell'altoparlante stesso riduce il volume
della cassa e deve essere sottratto. Il volume che ciascun altoparlante con-
tribuisce a togliere dalla cassa é indicato nelle tabelle con le specifiche.
16
Per ottenere le prestazioni massime, le pareti della cassa devono essere
rigide e non flettere sotto la sollecitaxione della elevata pressione generata
dal woofer. Noi raccomandiamo l'impiego di MDF con uno spessore min-
imo di 19 mm, materiale facilmente reperibile in tutte le falegnamerle. Per
casse di dimensioni molto grandi é indispensabile prevedere dei rinforzi
interni. Le giunture devono essere incollate e fissate con viti o chiodi in
abbondanza. Intermanmente le giunture devono essere siliconate per
impedire trafilati d'aria. Anche la colla da legno funziona bene. Essendo il
MDF un materiale poroso si consiglia di sigillare l'esterno con materiali
poliuretanici.
Costruire Una Cassa
ITALIANO
17
Notes
18
Notes
19
Notes
11/00 M.J.T.
LIT11035
Installation assistance available at:
http://www.rockfordfosgate.com/rftech
Rockford Corporation
546 South Rockford Drive
Tempe, Arizona 85281 U.S.A.
In U.S.A., (480) 967-3565
In Europe, Fax (49) 8503-934014
In Japan, Fax (81) 559-79-1265
www.rockfordfosgate.com
MADE IN THE USA
This product is designed, developed and assembled in the USA
by a dedicated group of American workers. The majority of the
components used in the construction of this product are pro-
duced by American companies.However,due to the global
nature of their manufacturing facilities and the loud-
speaker parts industry in general,some parts may be
manufactured in other countries.

Transcripción de documentos

RFP3408/3808 RFP3410/3810 RFP3412/3812 Installation & Operation RFP3415/3815 Páginas de Referencia para la Instalación Schéma d’Installation Installations Beiblatt Istruzioni di Installation 1 GETTING STARTED Welcome to Rockford Fosgate! This manual is designed to provide information for the owner, salesperson and installer. For those of you who want quick information on how to install this product, please turn to the Installation Section of this manual or refer to the icons listed below. Other information can be located by using the Table of Contents. We, at Rockford Fosgate, have worked very hard to make sure all the information in this manual is current. But, as we are constantly finding new ways to improve our product, this information is subject to change without notice. +- I N S T A L L A T I O N Sections marked INSTALLATION include “slam dunk” wiring connections TROUBLE-S H O O T I N G Sections marked TROUBLESHOOTING include recommendations for curing installation problems Visit our website for the latest information on all Rockford products. If, after reading your manual, you still have questions regarding this product, we recommend that you see your Rockford Fosgate dealer. If you need further assistance, you can call us direct at 1-800-669-9899. Be sure to have your serial number, model number and date of purchase available when you call. The serial number can be found on the outside of the box. Please record it in the space provided below as your permanent record. This will serve as verification of your factory warranty and may become useful in recovering your speaker if it is ever stolen. Serial Number: __________________________________ Model Number:__________________________________ –i– Dear Customer, Congratulations on your purchase of the world's finest brand of car audio speakers. At Rockford Fosgate we are fanatics about musical reproduction at its best, and we are pleased you chose our product. Through years of engineering expertise, hand craftsmanship and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve. For maximum performance we recommend you have your new Rockford Fosgate product installed by an Authorized Rockford Fosgate Dealer, as we provide specialized training through Rockford Technical Training Institute (RTTI). Please read your warranty and retain your receipt and original carton for possible future use. Great product and competent installations are only a piece of the puzzle when it comes to your system. Make sure that your installer is using 100% authentic installation accessories from Connecting Punch in your installation. Connecting Punch has everything from RCA cables and speaker wire to Power line and battery connectors. Insist on it! After all, your new system deserves nothing but the best. To add the finishing touch to your new Rockford Fosgate image order your Rockford wearables, which include everything from T-shirts and jackets to hats and sunglasses. To get a free brochure on Rockford Fosgate products and Rockford wearables, in the U.S. call 480-967-3565 or FAX 480-967-8132. For all other countries, call +001-480-967-3565 or FAX +001-480-967-8132. PRACTICE SAFE SOUND™ CONTINUOUS EXPOSURE TO SOUND PRESSURE LEVELS OVER 100dB MAY CAUSE PERMANENT HEARING LOSS. HIGH POWERED AUTOSOUND SYSTEMS MAY PRODUCE SOUND PRESSURE LEVELS WELL OVER SENSE AND PRACTICE SAFE SOUND. – ii – 130dB. USE COMMON iii Fs (Hz) Re (Ohms) Le (mH) Qts Qes Qms Vas (Liters) Vas (cuft) SPL (db M/W) XMAX (in) XMAX (mm) Power handling (RMS) Power handling (Peak) Speaker displacement Sealed Box (cu. ft.) Ported box (cu. ft.) Mounting diameter (in) Mounting diameter (mm) Mounting depth (in.) Mounting depth (mm) Specifications RFP3408 41 3.88 3.63 0.478 0.517 6.234 14.0 0.49 84.9 0.31 8 200 400 0.035 0.3 0.625 7-1/16 179 3-13/16 97 RFP3808 40 7.73 6.14 0.529 0.588 5.273 15.4 0.54 84.4 0.31 8 200 400 0.035 0.3 0.625 7-1/16 179 3-13/16 97 RFP3410 32 3.73 4.42 0.447 0.481 6.255 31.5 1.11 85.4 0.51 13 200 400 0.06 0.75 1 9-5/16 237 5-3/8 137 RFP3810 34 7.42 7.38 0.507 0.554 5.919 31.1 1.10 85.7 0.51 13 200 400 0.06 0.75 1 9-5/16 237 5-3/8 137 RFP3412 28 3.69 4.48 0.472 0.510 6.237 86.4 3.05 87.6 0.51 13 200 400 0.085 1.25 2 11-1/8 283 5-13/16 148 RFP3812 29 7.37 7.48 0.533 0.584 6.085 86.3 3.05 87.6 0.51 13 200 400 0.085 1.25 2 11-1/8 283 5-13/16 148 RFP3415 24 3.69 4.64 0.537 0.581 7.215 199.2 7.04 89.1 0.51 13 200 400 0.135 2.5 2.5 13-7/8 352 7-3/16 183 RFP3815 23 7.46 7.53 0.554 0.608 6.190 244.3 8.63 89.1 0.51 13 200 400 0.135 2.5 2.5 13-7/8 352 7-3/16 183 Table of Contents Specifications........................................................................................................iii Introduction ..........................................................................................................2 RF Punch HE Woofer Contents ..............................................................................2 Recommended Enclosures ....................................................................................2 Installation ............................................................................................................4 Recommended Enclosures ..............................................................................4 Building An Enclosure ....................................................................................6 Calculating Volume ........................................................................................6 Subwoofer Crossovers......................................................................................6 Wiring Configurations......................................................................................7 Warranty Information ............................................................................................8 International Information ......................................................................................9 1 Introduction The RF Punch HE Woofers are a full line of low frequency drivers sized from 8" to 15" and are available in 4 or 8 ohm impedance. The RF Punch HE woofers were designed for use primarily in small, sealed or ported enclosures. By utilizing the latest materials and construction techniques, we are able to offer a speaker with high output at low frequencies while requiring a minimum of operating space. RF Punch Woofer Contents RF Punch HE Woofer Installation & Owner's Manual +- I N S T A L L A T I O N Recommended Enclosures This manual outlines 2 specific types of enclosures that provide distinctly different performance. This section is to help you decide which type is best for your application. Sealed Sealed enclosures are the simplest to build. The most important part of building a sealed enclosure is to make sure that the enclosure is airtight. Using glue and some type of sealant on all seams will ensure solid construction and prevent air leaks. The box volume will directly impact the performance of the speaker. Larger enclosure will provide flatter response and deeper bass where smaller boxes will provide a bump in the response curve and generally higher output for greater SPL. Advantages of sealed enclosures •Small enclosures •Linear (Flat) response •No port noise •High power handling at all frequencies •Excellent for sound quality 2 Recommended Enclosures +- I N S T A L L A T I O N Vented Enclosures: Vented enclosures vary only from the sealed enclosures in that a vent or port is added to “tune” the enclosure. The enclosures recommended are designed for great overall performance. Larger boxes tend to be easy to tune to lower frequencies while medium and small boxes are easier to tune to higher frequencies. The vented design is less linear in response than the sealed box with noticeably more output at the tuning frequency. Advantages of vented enclosures •Higher average output than sealed •Tuning frequency can be easily adjusted by changing port length •Deep bass response with lower power requirements •Great for high output with limited power 3 Installation +- Punch 8" Recommended Enclosures I N S T A L L A T I O N Recommended Ported .625ft3 (17.70L) H = 11" (27.94cm) H = 11" (27.94cm) Recommended Sealed .30ft3 (8.50L) W = 19.75" (50.16cm) D = 8" (20.32cm) W = 11" (27.94cm) D = 8" (20.32cm) Range in Cubic Feet 2 3 4 5 0.3 .50 .625 1 1.50 .50 0.3 Range in Cubic Feet 6 1 2 3 4 5 6 Fb = 40 Hz Pd = 2.5" (6.35cm) Pl = 11.25" (28.57cm) Punch 10" Recommended Ported 1.0 ft3 (28.32L) H = 14" (35.56cm) H = 13" (33.02cm) Recommended Sealed .75ft3 (21.24L) W = 15" (38.10cm) W = 15" (38.1cm) D = 10" (25.40cm) 3 4 5 0.3 2 6 .75 1 1.50 .625 .75 0.3 Range in Cubic Feet D = 13.5" (34.29cm) Range in Cubic Feet 1 2 3 4 5 6 Fb = 35 Hz Pd = 3" (7.62cm) Pl = 13.25" (33.65cm) Punch 12" Recommended Ported 2.0 ft3 (56.63L) H = 18" (45.72cm) H = 14" (35.56cm) Recommended Sealed 1.25ft3 (35.40L) W = 19-3/4" (50.17cm) D = 12" (30.48cm) W = 20.5" (52.07cm) 3 4 5 6 4 1 1.50 2 0.3 1.75 1.25 0.3 1 D = 14" (35.56cm) Range in Cubic Feet Range in Cubic Feet 2 3 4 5 6 Fb=35 Hz Pd=4" (10.16cm) Pl=10.75" (27.30cm) Recommended Enclosures +- I N S T A L L A T I O N Punch 15" Recommended Enclosures Recommended Ported 2.5ft3 (70.79L) H = 20" (50.80cm) H = 20" (43.18cm) Recommended Sealed 2.5ft3 (70.79L) W = 25" (48.26cm) D = 12" (30.48cm) 3 4 5 0.3 6 1 75 2 2.50 1 1.75 0.3 D = 12" (44.45cm) Range in Cubic Feet Range in Cubic Feet 2 50 W = 25" (63.50cm) 3 4 5 6 Fb = 35 Hz Pd = 4" (10.16cm) Pl = 8" (20.32cm) 5 Building an Enclosure To work properly, the walls of the enclosure must be rigid and not flex when subjected to the high pressures generated by the speaker's operation. For optimum performance, we recommend using 3/4" MDF (Medium Density Fiberboard) and internal bracing. The enclosure should be glued together and secured with nails or screws. MDF is porous; therefore, it is suggested to also seal the outside walls with polyurethane. Calculating Volume Calculating volume is merely a matter of measuring the dimensions in inches and using the formula: Box Volume= Height” x Width” x Depth” (cubic feet) 1728"/(cu in/cu ft) If two facing sides are of uneven length, add them together and divide by two to take the average. Using this number will give you the volume without the necessity of calculating the box in sections and adding the sections together. The thickness of the baffle material reduces the internal volume so this must be subtracted from the outside dimensions to determine the internal volume. The speaker itself also reduces the internal volume. The amount of air displaced by each model is listed on the specification sheet and should also be subtracted from the gross volume calculation. Subwoofer Crossovers There are two operational types of crossovers, passive and active. Passive crossovers (coils or inductors) are placed on the speaker leads between the amplifier and speaker. An active crossover is an electronic filter which separates the audio signal fed to different amplifiers. For optimum subwoofer performance, we recommend using an active 80-100Hz low-pass crossover at 12dB/octave. 6 +- Wiring Configurations I N S T A L L A T I O N Three configurations for connecting speakers to an amplifier are Series, Parallel, and Series-Parallel wiring. A Series configuration consists of two or more speakers wired in an string (end to end). A Parallel configuration consists of two or more speakers wired with the common terminals connected across each other. A Series-Parallel configuration is a combination of both methods. Determine which method will be compatible with your amplifier. Series Wiring RT= R1+ R2+ Parallel Wiring 1 R3+ R4 = RT – – 1 + 1 + R2 + + 4Ω load + R1 + – 8Ω load + 1 R3 4Ω load – – – 8Ω load 4Ω + – – + + – + – + – + • RT indicates the total speaker load • R1, R2, etc. indicates each speaker in the system 7 + etc. R4 + 4Ω load 8Ω load Series-Parallel Wiring 1 + – Limited Warranty Information Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms: • • Length of Warranty 1 year on speakers 3 years on electronics 2 years on source units 30 days on speaker B-stock (receipt required) 90 days on electronic B-stock (receipt required) What is Covered This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its possessions. Product purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered only by that country’s Distributor and not by Rockford Corporation. • Who is Covered This warranty covers only the original purchaser of Rockford product purchased from an Authorized Rockford Fosgate Dealer in the United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and date of purchase. • Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Rockford's discretion. • What is Not Covered 1. Damage caused by accident, abuse, improper operations, water, theft 2. Any cost or expense related to the removal or reinstallation of product 3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center 4. Any product which has had the serial number defaced, altered, or removed 5. Subsequent damage to other components 6. Any product purchased outside the U.S. 7. Any product not purchased from an Authorized Rockford Fosgate Dealer • Limit on Implied Warranties Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Rockford Fosgate any other liability in connection with the sale of the product. • How to Obtain Service Please call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford. Ship to: Electronics Rockford Corporation Warranty Repair Department 2055 E. 5th Street Tempe, AZ 85281 RA#:_________________ Ship to: Speakers Rockford Acoustic Design (Receiving-speakers) 609 Myrtle N.W. Grand Rapids, MI 49504 RA#:_________________ 8 ESPAÑOL LEA DETENIDAMENTE LAS SIGUIENTES INSTRUCCIONES DE INSTALACÍON DEL PRODUCTO. Introduccíon Los woofers RF Punch HE son una gama completa de drivers de baja frecuéncia que comprenden diámetros de 8" a 15". Los Woofers RF Punch HE fueron diseñados para su utilización en caja cerrada o bass-reflex mediana. Diseñada para ofrecer la máxima calidad, los Woofers RF ofrecen al entusiasta principiante en sistemas de car audio, la oportunidad para disfrutar de un bajo sólido en las bajas frecuéncias. Nuestros ingenieros han seleccionado materiales y técnicas para la construcción de nuestros altavoces con el objetivo de ofrecer características y confianza comparable a otros altavoces vendidos much más caros. Terminales De Entrada Los terminales positivo y negativo de entrada están ubicados uno en cada extremo de la carcasa. Este montaje separado previene de posibles cortocircuitos de la señal a altos niveles de volumen. El terminal positivo está marcado con un punto en la carcasa. Un punto rojo indica que la impedancia del altavoz es de 8 ohmios, y un punto violeta que es de 4 ohmios. Calculo Del Volumen Para calcular el volumen sólo se han de medir las dimensiones en centimetros y aplicar la fórmula: Volumen du Alto (cm) x Ancho (cm) x Profundidad (cm) la caja = 1000cc3/litros (en litros) Si dos caras opuestas son de diferente tamaño, súmelas y divida el total por dos para obtener el promedio. Usando esta técnica se ahorrara el cálculo por secciones. El espesor del material con que está construida la caja reduce el volumen interno, de manera quer ha de restarse de las dimensiones exteriores para determinar el volumen interior. La cantidad de aire que ocupa cada modelo viene especificado en la hoja de caracteristicas y también debe sustraerse para obtener el volumen neto interior. 9 ESPAÑOL Construccion De Un Recinto Para un buen funcionamiento las paredes del recinto han de ser rigidas y sin flexión a altas presiones de aire. Recomendamos usar un espesor de 1.9 cm de conglomerado de alta densidad o fibra de media densidad. Si el recinto es muy grande es necessario reforzarlo internamente. Las juntas deben ser encoladas y aseguradas con tornillos o grapas. Internamente las juntas deben ser selladas con silicona para prevenir las fugas de aire. La cola para madera es la mejor opción. Debido a la porosidad del conglomerado de alta densidad y la fibra es recomendable sellar exteriormente la caja con poliuretano. 10 FRANÇAIS VEUILLEZ LIRE LES INSTRUCTIONS SUIVANTES POUR L'INSTALLATION DE CE PRODUIT. Introduction Les woofers RF Punch HE sont une gamme complète de haut-parleurs de graves allant de 20 à 46 cm et disponibles en 4Ω ou 8Ω. Les woofer RF Punch HE ont été conçus pour être utilisé de préférence en enceintes closes. En utilisant les techniques et les matériaux de construction les plus récents, nous sommes parvenus à construire un haut-parleur fournissant un rendement élevé dans les graves tout en requérant un volume opérationnel minimum. BORNIERS Les bornes positives et négatives sont fixées de part et d'autre du saladier. Cette séparation permet d'empêcher les courts-circuits entre les fils lors des reproductions sonores élevées. La borne positive est repérée par un petit point de couleur sur le saladier. Un point rouge est utilisé pour les hautparleurs de 8Ω, un point violet pour les haut-parleurs de 4Ω. Calcul Du Volume On calcule le volume en mesurant la dimension de chaque côté et en utilisant la formule suivante: Volume du caisson = (Litres) Hauteur (cm) x Longueur (cm) x Largeur (cm) 1000cc3/litres Si les due côtés qui se font face n'ont pas la même longueur, additionnez les et divisez le résultat par deux pour obtenir la moyenne des deux longueurs. Utilisez le nombre ainsi obtenu dans la formule pour déterminer le litrage. Cette méthode permet d'obtenir le volume du caisson sans devoir faire de calculs compliqués de section de volume. L'épaisseur du matériau dont est fait le caisson réduit le volume interne de celui-ci. Lorsqu'on mesure les côtés du caisson il ne faut donc pas oublier d'oter des mesures l'epaisseur du matériau. Le haut-parleur lui-même diminue le volume interne du caisson. Le volume d'air déplacé par chaque modèle de haut-parleur est repris dans les spécifications techniques et doit également être soustrait du volume total. 11 FRANÇAIS Construire Un Caisson Pour fonctionner convenablement les parois du caisson doivent être rigides lorsqu'elles sont soumises aux hautes pressions dues au fonctionnement du haut-parleur. Nous vous recommandons d'utiliser des panneaux de bois aggloméré à haute ou moyenne densité de particules de type “MDF”. Ces panneaux sont disponibles dans la plupart des magasins de bricolage. Pour un caisson de grand volume il est recommandé de placer des renforts à l'intérieur du caisson. Les différents côtés devront être collés (colle à bois) et vissés (ou éventuellement cloués). Il est recommandé de mettre un joint de silicone dans les arêtes internes du caisson afin d'éviter les fuites d'air. Du fait de la porosité des matériaux que nous vous conseillons il est préférable de recouvrir l'extérieur du caisson avec du polyuréthane. 12 DEUTSCH BITTE LESEN SIE DIESE GEBRAUCHSANLEITUNG ZUERST SORGFÄLTIG DURCH. DAS KANN SIE VOR FALSCHEM EINSATZ, AUSFALLEN ODER SOGAR BESCHÄDIGUNG DES PRODUKTES ODER IHRES FAHRZEUGES SCHÜTZEN. Einleitung Die RF-Punch HE Woofer sind eine komplette Produktlinie von TiefFrequenzlautsprechern mit Durchmesser von 20 cm bis zu 46 cm, erhältlich in der Impendanz 4 - und 8 Ohm (Die RF Punch HE Woofer wurden vorwiegend fur den Einsatz in geschlossenen Gehäuse konstruiert). Durch die Verwendung neuester Materialien und Produktionstechniken können wir Ihnen heute einen Lautsprecher vorstellen, der hohe Lautstärken und tiefe Frequenzen selbst in sehr kleinen Volumen reproduzieren kann. Anschlubterminals Die Anschluβterminals wurden auf jeder Seite des Lautsprecherkorbes positioniert um eventuelle Kurzschlüsse auch bei hoher Leistung auszuschlieβen (Das Positiv-Terminal ist durch eine Farbmarkierung gekenzeichnet). Eine rote Farbamrkierung befindet sich immer bei einem Lautsprecher mit einer Impedanz von 8 Ohm, eine violette Farbmarkierung zeichnet die Lautsprecher mit der Impedanz 4 Ohm. Volumen-Berechnung Zur Volumen-Berechung benötigen sie die genauen Maβe und Dimensionen in Zentimetern. GehäuseVolumen = (Kubik Liter) Höhe (cm) x Breite (cm) x Tiefe (cm) 1000cc3/Kubik liter Sollten zwei gegenüberliegende Seiten ungleich lang sein, so können sie die Maβe zusammen rechnen und durch zwei dividieren um den Durchschnitt zu erhalten. Dies macht Ihnen die Berechnung leichter und Sie müssen das Gehäuse nicht in Sektionen berechnen, die Sie danach wieder mühselig zusammen zählen müssen. Die Materialstärke beeinfluβt natürlich auch das Innen-Volumen, so muss für eine präzise Berechnung die Materialstärke von Auβen-Volumen abgezogen werden. Der Lautsprecher verringert ebenfalls das Innen-Volumen, auch er sollte natürlich heraus gerechnet werden. Jedes Lautsprecher-Volumen ist unter “Specifications” genau aufgelistet. 13 DEUTSCH Der Gehäuse Bau Um das Gehäuse so präzise wie möglich zu bauen, sollten die Gehäusewände sehr steif und luftundurchlässig sein, um dem entsehenden Luftdruck des Lautsprechers standhalten zu können. Wir empfehlen 1,9 cm mittelverdichtete Faserplatte (MDF), die in den meisten Baumärkten angeboten wird. Bei einem gröβeren Gehäuse sollten Sie Versteifungen durch Holzbalken montieren. Diese sollten – wie auch das gesamte Gehäuse – mit Holzleim geklebt und verschraubt oder vernagelt sein. Um eine höhere Dichte zu erreichen, empfiehlt es sich, die Kanten und Verschraubungen mit Silikon abzudichten und das Gehäuse von innen mit einer Hohlraumversiegelung zu behandeln. 14 ITALIANO LEGGERE CON ATTENZIONE LE SEGUENTI ISTRUZIONI PRIMA DELL'INSTALLAZIONE DEL PRODOTTO. Introduzione I woofer RF Punch HE sono una linea completa di altoparlanti per basse frequenze con diametri che vanno da 20 a 46 cm e disponibili sia a 4 che a 8 ohm. (I woofer RF Punch HE sono progettati per il funzionamento principale in cassa chiusa.). Impiegando le piú aggiomate tecnologie e materiali, siamo in grado di offrire altoparlanti che possono riprodurre un'elevata pressione sonora alle basse frequenze mantenendo i volumi di impiego assolutamente ridotti. CONNESSIONI DI INGRESSO I connettori di ingresso positivi e negativi sono montati sul cestello in posizioni speculari. Il montaggio separato impedisce al segnale musicale di cortocircuitarsi ad altissimi livelli di volume. (Il terminale di ingresso é indicato da una marcatura colorata sul cestello.) Un contrassengno rosso indica che l'impedenza dell'altoparlante é 8 ohm, il contrassegno viola é impiegato per i 4 ohm. Calcolo del Volume Calcolare il volume é essenzialmente solo un problema di misurazione delle dimensioni in centimetri della cassa e di applicazione della formula: Volume della Alteza (cm) x Larghezza (cm) x Profonditá (cm) cassa = (litri) 1000cc3/litri Se due pareti parallele sono di dimensioni diverse (prisma), semplicemente sommatele e dividete il risulto per due. Impiegando il risultato ottenuto potete calcolare il volume senza dividere la cassa i sezioni. Lo spessore del legno riduce il volume interno, per cui é necessario sottrario dalle dimensioni esterne. Anche il volume dell'altoparlante stesso riduce il volume della cassa e deve essere sottratto. Il volume che ciascun altoparlante contribuisce a togliere dalla cassa é indicato nelle tabelle con le specifiche. 15 ITALIANO Costruire Una Cassa Per ottenere le prestazioni massime, le pareti della cassa devono essere rigide e non flettere sotto la sollecitaxione della elevata pressione generata dal woofer. Noi raccomandiamo l'impiego di MDF con uno spessore minimo di 19 mm, materiale facilmente reperibile in tutte le falegnamerle. Per casse di dimensioni molto grandi é indispensabile prevedere dei rinforzi interni. Le giunture devono essere incollate e fissate con viti o chiodi in abbondanza. Intermanmente le giunture devono essere siliconate per impedire trafilati d'aria. Anche la colla da legno funziona bene. Essendo il MDF un materiale poroso si consiglia di sigillare l'esterno con materiali poliuretanici. 16 Notes 17 Notes 18 Notes 19 Installation assistance available at: http://www.rockfordfosgate.com/rftech MADE IN THE USA This product is designed, developed and assembled in the USA by a dedicated group of American workers. The majority of the components used in the construction of this product are produced by American companies. However, due to the global nature of their manufacturing facilities and the loudspeaker parts industry in general, some parts may be manufactured in other countries. Rockford Corporation 546 South Rockford Drive Tempe, Arizona 85281 U.S.A. In U.S.A., (480) 967-3565 In Europe, Fax (49) 8503-934014 In Japan, Fax (81) 559-79-1265 www.rockfordfosgate.com 11/00 M.J.T. LIT11035
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Rockford Fosgate Punch HE RFP3808 Installation & Operation Manual

Tipo
Installation & Operation Manual