T&S B-1171 Installation And Maintenance Instructions Manual

Tipo
Installation And Maintenance Instructions Manual
Installation and
Maintenance
Instructions
WORKBOARD FAUCET
B-1171 and B-1172
(with diverter valve)
Deutsch: InstallaƟ ons- und
Wartungsanleitun-
gen
Español: la Instalación y las
Instrucciones de
Mantenimiento
Français: les InstrucƟ ons d’In-
stallaƟ on et d’Entre-
Ɵ en
P/N: 098-009717-45 Rev.4
Date: 10-22-14
Drawn: TEH 10-22-14
Checked: JRM 11-04-14
Approved: JHB 11-10-14
Limited One Year Warranty
T&S warrants to the original purchaser
(other than for purposes of resale) that such
product is free from defects in material and
workmanship for a period of one (1) year
from the date of purchase. During this one-
year warranty period, if the product is found
to be defec ve, T&S shall, at its op ons,
repair and/or replace it. To obtain warranty
service, products must be returned to...
T&S Brass and Bronze Works, Inc.
AƩ n: Warranty Repair Department
2 Saddleback Cove
Travelers Rest, SC 29690
Shipping, freight, insurance, and other
transportation charges of the product
to T&S and the return of repaired or
replaced product to the purchaser are the
responsibility of the purchaser. Repair
and/or replacement shall be made within a
reasonable me a er receipt by T&S of the
returned product. This warranty does not
cover Items which have received secondary
nishing or have been altered or modi ed
a er purchase, or for defects caused by
physical abuse to or misuse of the product,
or shipment of the products.
Any express warranty not provided
herein, and any remedy for Breach of
Contract which might arise, is hereby
excluded and disclaimed. Any implied
warran es of merchantability or tness for
a par cular purpose are limited to one year
in dura on. Under no circumstances shall
T&S be liable for loss of use or any special
consequen al costs, expenses or damages.
Some states do not allow limitations
on how long and implied warranty lasts
or the exclusion or limita on of incidental
or consequen al damages, so the above
limita ons or exclusions may not apply to
you. Speci c rights under this warranty and
other rights vary from state to state.
Exploded View
2
3
2
18
1
21
22
10
11
12
13
19 20
4
5
6
7
8
9
14
15
16
17
23
3
Part Number Guide
Base Faucet Assemblies
1 Base Faucet N/A
2 Washer, Shank 000999-45
3 Locknut 002954-45
4 Washer 001043-45
5 Seat 000763-20
6 Valve, Diverter Piston 002338-45
7 Escutcheon Body (3-1/2” - 4” centers) 001258-40
Escutcheon Body (8” centers) 001259-40
8 Locknut, Cover Plate 000712-25
9 Asm, Spindle - LTC, Includes Screw, Index & Handle 002709-40
Asm, Spindle - RTC, Includes Screw, Index & Handle 002710-40
10 Spindle - LTC 009754-25
Spindle - RTC 009753-25
11 Handle 001638-45
12 Index, Bu on - Blue 001660-45
Index, Bu on - Red 001661-45
13 Screw, Lever Handle 000922-45
14 Adapter, Diverter 001484-20
15 O-Ring, Center Body 001069-45
16 Screw, Diverter Cover 001486-45
17 Cover, Diverter 001485-40
Nozzle Assemblies
18 Nozzle Tip 000863-25
19 Washer 001048-45
20 Screen 001323-45
21 Swing Nozzle N/A
22 Hose Guide 001496-45
23 Hose Spray 001495-45
4
5. Reinstall no.2 and no.3 back onto
no.1 shank under bo om of sink.
Connect water supply to no.1.
6. Tighten no.3 with a wrench.
Spray Hose/Diverter InstallaƟ on
7. Disassemble no.22, place shank
of no.22 thru hole for no.23. Tighten
locknut of no.22.
8. Apply te on tape to threaded end
of no.23. Insert no.23 through no.22
and a ach to no.1.
9. Turn on water supply and check for
leaks.
Nozzle InstallaƟ on:
Note: Nozzle should be installed rst.
See diagram below:
1. Place no.17 over no.14. Insert
no.16 into each side of no.17.
2. Apply te on tape or pipe joint
compound to threaded end of no.21.
Screw no.21 into no.17, rotate no.17
so that no 21 is facing front, ghten
no.16.
Faucet InstallaƟ on:
3. Shut o water supply and drain
lines. Drill (4) four holes, into
countertop where you are installing
no.1.
21
17
16
14
sink
2
3
1
water
supply
water
supply
4. Place no.1 into the (3) three
pre-drilled moun ng holes.
1
22
23
22
sink
General Instructions
Ø 1”
Ø 1”
8” (for B-1172)
2” (for B-1171)
4” Min.
for no.23
4” (for B-1171)
4” (for B-1172)
5
5. Instale de nuevo las partes No.2
y No.3 en el tronco de la parte No.1
debajo del fondo del lavatorio.
Conecte el sur do de agua a la parte
No.1.
6. Apriete No.3 con una llave.
Instalación Del Desviador para La
Manguera Roceadora
7. Desarme la parte No.22, coloque el
tronco de la parte No.22 a través del
hueco para la parte No.23. Aprete la
contra tuerca de la parte No.22.
8. Aplique cinta para rosca de tubería
al extremo con rosca de la parte
No.23. Insarte la parte No.23 a través
de la parte No.22 y júntelo a la parte
No.1.
9. Abra la fuente de agua e
inspeccione por ltraciones.
Instalación De La Boquilla:
Nota: La boquilla debe de ser
instalada primero. Mire el dibujo de
abajo:
1. Coloque la parte No.17 sobre la
parte No.14. Coloque las partes
No.16 dentro de ambos lados de la
parte No.17.
2. Aplique cinta para rosca de
tubería o compuesto de coyuntura al
extremo con roscas de la parte No.21.
Atornille la parte No.21 entre la parte
No.17, gire la parte No.17 debido a
que la parte No.21 esté oscilada hacia
el frente, aprete la parte No.16.
Instalación De La Canilla:
3. Cierre la fuente principal de agua y
desagüe las tuberias. Perfore (4) cu-
atro huecos, en el mostrador donde
será instalada la parte No.1.
21
17
16
14
Lavatorio
SurƟ do De Agua
4. Coloque la parte No.1 entre los (3)
tres huecos hechos anteriormente.
1
22
23
22
Lavatorio
2
3
1
Instrucciones Generales
Ø 2.5cm
Ø 2.5cm
20cm (por B-1172)
5cm (por B-1171)
10cm Min.
por No.23
10cm (por B-1171)
10cm (por B-1172)
6
5. Réinstaller Nº.2 et Nº.3 sur la
jambe au-dessous l’évier. Brancher le
tuyau qui fournir l’eau à Nº.1.
6. Resserrer Nº.3 avec une clef.
Le Tuyau De Jet/ L’InstallaƟ on
D’Aiguillage:
7. Désassembler Nº.22, me re la
jambe de Nº.22 à travers le trou de
Nº.23. Resserrer l’écrou de Nº.22.
8. Appliquer le ruban en Té on à
l’extrémité avec les lets de Nº.23.
Inserer Nº.23 à travers Nº.22 et
a acher à Nº.1.
9. Recommencer l’eau et véri er s’il y
a des fuites.
L’InstallaƟ on De LAjutage:
Noter: Les ajutages devoir être in-
staller au début. Voir le diagramme
ci-dessous:
1. Me e Nº.17 sur Nº.14. Insérer
Nº.16 dans chaque côté de Nº.17.
2. Appliquer le ruban en Té on ou le
composé pour les tuyaux à l’ex-
trémité avec les lets de Nº.21. Visser
Nº.21 dans Nº.17, tourner Nº.17
jusqu’à Nº.21 être en face, resserrer
Nº.16.
L’InstallaƟ on Du Robinet:
3. Fermer la réserve de l’eau et
égou er la tuyauterie. Percer (4)
quatre trous (3 trous pour B-1172)
dans le comptoir où vous aller in-
staller Nº.1.
l’évier
le tuyau qui
fournir l’eau
4. Me re Nº.1 dans les trois trous
déjà préparés.
1
23
21
17
16
14
22
22
l’évier
2
3
1
Instructions Générales
Ø 2.5cm
Ø 2.5cm
20cm (pour B-1172)
5cm (pour B-1171)
10cm Min.
pour Nº.23
10cm (pour B-1171)
10cm (pour B-1172)
7
SpülƟ sch
5. Nr.2 und 3 auf der Unterseite
des Spül sches wieder auf den
Scha von 1 aufsetzen. Nr.1 mit der
Wasserleitung verbinden.
6. Nr.3 mit einem Schraubenschlüssel
anziehen.
Brausenschlauch/InstallaƟ on des
Umstellers
7. Nr.22 auseinandernehmen, Scha
von Nr.22 durch das Loch für Nr.23
stecken. Gegenmu er von Nr.22
anziehen.
8. Das Gewinde von Nr.23 mit
Te onband umwickeln. Nr.23
durch Nr.22 hindurchstecken, Nr.22
anziehen.
9. Wasserzufuhr andrehen und auf
Lecks prüfen.
SchwenkhahninstallaƟ on:
Anmerkung: Der Schwenkhahn ist als
ertes zu installieren. Siehe Zeichnung
unten:
1. Nr.17 auf Nr.14 aufsetzen. Nr.16 in
beide Seiten von Nr.17 einfügen.
2. Te onband oder Rohrdichtmasse
auf das Gewinde von Nr.21 au ragen.
Nr.21 in Nr.17 einschrauben, Nr.17
so drehen, daß Nr.21 nach vorn
ausgerichtet ist, Nr.16 anziehen.
ArmatureninstallaƟ on:
3. Wasserzufuhr abstellen und
Leitungen entleeren. Vier (4)
Löcher (3 Löcher für B-1172) in
die Abdeckpa e bohren, wo Nr.1
installiert wird.
21
17
16
14
Wasserzufuhr
4. Nr.1 in die drei vorgebohrten
Löcher einsetzen.
1
22
23
22
SpulƟ sch
2
3
1
Allgemeine Anleitungen
2,5cm Durchmesser
2,5cm Durchmesser
20cm (für B-1172)
5cm (für B-1171)
10cm Min.
für Nr.23
10cm (für B-1171)
10cm (für B-1172)
T&S BRASS AND BRONZE WORKS, INC.
A rm commitment to application-engineered plumbing products
2 Saddleback Cove, P.O. Box 1088, T & S Brass-Europe
Travelers Rest, SC 29690 ‘De Veenhoeve’
Phone: (864) 834-4102 Oude Nieuwveenseweg 84
Fax: (864) 834-3518 2441 CW Nieuwveen
E-mail: [email protected] The Netherlands
RELATED T&S BRASS PRODUCT LINE
B-1125
Back-Mounted
Workboard Faucet
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

T&S B-1171 Installation And Maintenance Instructions Manual

Tipo
Installation And Maintenance Instructions Manual

En otros idiomas