Yamaha V3 El manual del propietario
- Categoría
- Software
- Tipo
- El manual del propietario
Este manual también es adecuado para
M7CL V3 Editor Owner’s Manual
1
Special Notices
•The software and this owner’s manual are the exclu-
sive copyrights of Yamaha Corporation.
•Copying of the software or reproduction of this
manual in whole or in part by any means is expressly
forbidden without the written consent of the manu-
facturer.
•Copying of the commercially available music
sequence data and/or digital audio files is strictly
prohibited except for your personal use.
•Yamaha makes no representations or warranties
with regard to the use of the software and documen-
tation and cannot be held responsible for the results
of the use of this manual and the software.
•The screen displays as illustrated in this owner’s
manual are for instructional purposes, and may
appear somewhat different from the screens which
appear on your computer.
•For information on modification of system soft-
ware, certain functions, or specifications due to ver-
sion update of the application, please visit the
following website:
http://www.yamahaproaudio.com/
•Windows is a registered trademark of Microsoft
Corporation in the U.S. and other countries.
•Apple, Mac and Macintosh are trademarks of Apple
Inc., registered in the U.S. and other countries.
•The company names and product names in this
Owner’s Manual are the trademarks or registered
trademarks of their respective companies.
❏
Yamaha Pro Audio Global Site
http://www.yamahaproaudio.com/
Contents
Getting Started ......................................... 2
Master window ....................................... 13
Overview window ................................... 16
Selected Channel window....................... 29
Library window ....................................... 49
Patch Editor window............................... 52
Rack window ........................................... 56
Meter window ......................................... 65
Group/Link window ................................ 67
Scene window ......................................... 71
User Defined Keys Setup window........... 78
Sends On Fader window ......................... 79
Output Port window ............................... 80
Keyboard Shortcuts................................. 82
Index........................................................ 83
*Specifications and descriptions in this owner ’s manual are
for information purposes only. Yamaha Corp. reserves the
right to change or modify products or specifications at any
time without prior notice.
M7CL V3 Editor
M7CL V3 Editor
M7CL V3 Editor
Owner’s Manual
Owner’s Manual
Owner’s Manual
Version 3.5
Version 3.5
Version 3.5
Description of menus and buttons
In the event that menu and button names on a Windows
system are different from those on a Mac, this manual
uses the Windows menu and button names followed by the
Mac menu and button names in parentheses.
M7CL V3 Editor Owner’s Manual
2
Overview of M7CL V3 Editor
M7CL V3 Editor (hereinafter called “M7CL Editor” in this document) enables you to remotely control a Yamaha
M7CL mixing console (Version 3) (such as M7CL-48ES, M7CL-48, or M7CL-32; hereinafter collectively called
“M7CL” in this document). M7CL Editor also enables you to save the parameter settings on your computer. To use
M7CL Editor, you must first perform the following operations:
1 Start and configure Studio Manager.
2 Start and configure M7CL Editor.
3 Synchronize M7CL Editor with your M7CL console (
➥
p.12).
For more information on using Studio Manager, refer to the Studio Manager Owner’s Manual.
Configuring M7CL Editor
You must configure the following settings for each open Editor.
• Before you make the following settings, you must make settings for the DME-N Network Driver (Windows)
or the Network-MIDI Driver (Mac) and select the MIDI port in the Setup window of Studio Manager.
•To open an editor, double-click the icon for the desired editor in the Studio Manager window.
❏
System Setup
To open the System Setup dialogbox, choose [System Setup] from the [File] menu.
Be sure to specify the Input port and Output port.
A
Input port/Output port
From the ports you specified in Studio Man-
ager, select the ports that the editor will use
to communicate with the M7CL console.
B
Model Select
This section enables you to make settings for
the M7CL model you are using.
M7CL-32/M7CL-48/M7CL-48ES
Select the model of your M7CL. If M7CL
Editor is synchronized with the M7CL con-
sole, the model will automatically be selected
and other model options will be grayed out.
Stage Box Data Conversion
Converts HA settings and input patch set-
tings accordingly if, for example, you want to
use (on an M7CL-48ES system) data stored
by a system that features SB168-ES units
connected to M7CL-48 slots.
Click the [Conversion…] button to display
the Stage Box Data Conversion dialog box for
conversion. (
➥
p.8)
Getting Started
NOTE
NOTE
NOTE
1
2
3
4
5
6
9
7
8
M7CL V3 Editor Owner’s Manual
3
C
Channel Select / Sends On Fader
This checkbox enables you to specify whether or not the M7CL console and M7CL Editor are linked to each other
for the following operations:
• Selecting channels
• Switching between normal mode and SENDS ON FADER mode
• Switching between MIX and MATIRX in SENDS ON FADER mode
If you do not check the box, the M7CL console and M7CL Editor will operate independently.
D
Fast Sync
This allows synchronization to be speed up, reducing the time required. Check this box to enable the function.
E
Window Control From Console
This option determines whether or not using the USER DEFINED KEYS on the console enables you to remotely
open and close the M7CL Editor windows.
F
Level Meter
By disabling the meter function you can reduce the processing load caused by screen drawing and communica-
tion. This option specifies whether the level meter functionality will be enabled.
G
Confirmation
These check boxes specify whether a confirmation dialog box will appear when you store (Store Confirmation),
recall (Recall Confirmation), patch (Patch Confirmation), or make a patch change that would modify an existing
patch (Steal Patch Confirmation).
H
Administrator Password
Enter the Administrator password that was specified on the M7CL console. If this password is not entered cor-
rectly, it will not be possible to synchronize from M7CL Editor to the M7CL console.
I
Set Default
Press this button to use the settings currently specified in the System Setup dialog box as the default settings. The
next time when you start up M7CL Editor, it will use these settings.
M7CL V3 Editor Owner’s Manual
4
❏
Mixer Setup
To open the Mixer Setup dialogbox, choose [Mixer Setup] from the [File] menu.
A
Mix Bus Setup
Here you can make settings relating to the MIX buses.
Signal Type:
Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered MIX
buses.
Bus Type/Send Point:
Choose either VARI (PRE FADER) or VARI (PRE EQ) or FIXED for each two adja-
cent odd-numbered/even-numbered MIX buses.
Pan Link:
The PAN setting for signals sent to stereo MIX buses will link to the PAN setting for the STEREO bus.
This parameter is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI.
B
Matrix Bus Setup
Here you can make settings relating to the MATRIX buses.
Signal Type:
Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered
MATRIX buses.
Send Point for Input Channels:
Choose either PRE FADER or PRE EQ for each two adjacent odd-num-
bered/even-numbered MATRIX buses.
Pan Link:
The PAN setting for signals sent to stereo MATRIX buses will link to the PAN setting for the STEREO
bus. This parameter is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI.
1
2
M7CL V3 Editor Owner’s Manual
5
❏
Creating a user key
To open the Create User Key dialogbox, choose [Create User Key] from the [File] menu.
This creates a user key (with “.M7U” file name extension) that can be read from a USB storage device by the
M7CL console to automatically set user-specific parameters.
A
User Name
Specify the name of the user. You can enter up to eight single-byte alphanumeric characters. Lowercase characters
will automatically become uppercase on the M7CL console.
B
Comment
Enter a comment for each user. You can enter up to thirty-two single-byte alphanumeric characters.
C
Password
Enter a password that will be used when this user key is read by the M7CL console. You can enter up to eight sin-
gle-byte alphanumeric characters. Uppercase and lowercase are distinguished.
D
Re-Enter Password
Enter the password once again as a safeguard against mistaken entry.
E
POWER USER
Specify whether this user is a power user. Power users can use the M7CL console to create or edit a user authenti-
cation key with a specified user level.
F
Administrator Password
Enter the Administrator password that was specified on the M7CL console. This is not required if no Administra-
tor password has been specified on the M7CL console, but if this password is incorrect you will be asked to enter
it when the user key is read.
2
1
3
4
6
5
7
8
9
J
K
O P
L
N
M
M7CL V3 Editor Owner’s Manual
6
G
ACCESS PERMISSION
In this area, specify the parameters that this user will be allowed to operate.
H
CH OPERATION
INPUT, ST IN, DCA, MIX, MATRIX, ST/MONO:
Select the channels whose parameters will be opera-
ble.
HA:
Change the operating privileges for the head amp gain and phantom power of the selected channels.
PROCESSING:
Change the operating privileges for overall signal processing parameters (except for fader
and [ON] key) of the selected channel. For the specific parameters included in PROCESSING, refer to the
appendix of the M7CL owner’s manual.
FADER/ON:
Change the operating privileges for the pan/balance, fader, channel on, send on/off, and send
level of the selected channels.
Set All:
Turn on HA, PROCESSING, and FADER/ON for all channels.
Clear All:
Turn off HA, PROCESSING, and FADER/ON for all channels.
Set by One Click:
If this button is on, pressing the channel select button repeatedly will set HA, PRO-
CESSING, and FADER/ON to On or Off simultaneously.
I
SCENE LIST
STORE/SORT:
Change the operating privileges for scene store and sort operations.
RECALL:
Change the operating privileges for scene recall operations.
J
LIBRARY LIST
STORE/CLEAR:
Change the operating privileges for library store and clear operations.
RECALL:
Change the operating privileges for library recall operations.
K
FILE LOAD
USER SETUP:
Change the operating privileges for loading user-defined keys and preferences when loading a
file.
SYSTEM SETUP MONITOR SETUP:
Change the operating privileges for loading system setup and moni-
tor setup settings when loading a file.
CURRENT SCENE:
Change the operating privileges for loading the current scene when loading a file.
SCENE LIST:
Change the operating privileges for loading the scene list when loading a file.
LIBRARY LIST: Change the operating privileges for loading the library list when loading a file.
L CURRENT SCENE
INPUT PATCH: Change the operating privileges for input patch operations.
INPUT NAME: Change the privileges for editing the input names.
OUTPUT PATCH: Change the operating privileges for output patching.
OUTPUT NAME: Change the privileges for editing the output names.
BUS SETUP: Change the operating privileges for buses.
RACK 1-8: Change the operating privileges for rack operations.
MUTE GROUP ASSIGN: Change the privileges for assigning mute groups.
MUTE GROUP MASTER: Change the operating privileges for enabling/disabling mute groups.
M MONITOR SETUP
OSCILLATOR: Change the operating privileges for oscillator settings.
TALKBACK: Change the operating privileges for talkback settings.
N SYSTEM SETUP
MIXER SETUP: Change the privileges for making mixer setup settings.
OUTPORT SETUP: Change the privileges for making outport setup settings.
MIDI: Change the privileges for making MIDI settings.
O Create
Creates the user key.
P Cancel
Closes the dialogbox.
M7CL V3 Editor Owner’s Manual
7
Working with Sessions
All of your console’s mix settings in M7CL Editor, including Scene and library data, are called Sessions.
The following table describes how to handle Sessions.
When you save a session in the window of an editor, the settings of only that editor will be saved in a file. Session files
saved by M7CL Editor have a filename extension of “.YSE”. Files in which only the M7CL console data is saved (file-
name extension “.M7C”) can also be handled, allowing you to use a USB storage device to exchange data with the
M7CL console.
If you save a Session in the Studio Manager window, all selected Editor settings are saved in a file with a file extension
of “.YSM.”
With M7CL V3 Editor, you can also open files that have been saved on any version of M7CL console or
Editor other than version 3 if the files feature the extension “.M7C” or “.YSE”. However, once you save
these files on the M7CL V3 console or Editor, you will not be able to open them on the other version of
M7CL console or Editor.
If you use the M7CL-48ES console to open a session saved via the M7CL-32/48 console, or if you use the
M7CL-32/48 console to open a session saved via the M7CL-48ES, the patch settings will change and the
same HA settings will be used as follows:
(*) The same HA settings will be used.
Creating a new Session
Choose [New Session] from the [File] menu.
Opening a previously saved Session
Choose [Open Session] from the [File] menu.
Saving the current Session
Choose [Save Session] from the [File] menu.
Saving the current Session with a new name
Choose [Save Session As...] from the [File] menu.
M7CL-32/48 M7CL-48ES
INPUT 1-16
↔
(
*
)
ES IN 1-16
INPUT 17-32
↔
(
*
)
ES IN 17-32
INPUT 33-48
↔
(
*
)
ES IN 33-48
ST IN 1L-4R
↔
(
*
)
OMNI IN 1-8
SLOT1 IN 1-16
↔
(
*
)
SLOT1 IN 1-16
SLOT2 IN 1-16
↔
(
*
)
SLOT2 IN 1-16
SLOT3 IN 1-16
↔
(
*
)
SLOT3 IN 1-16
TALKBACK
↔
TALKBACK
OMNI OUT 1-16
↔
ES OUT 1-16
No assignment
↔
ES OUT 17-24
No assignment
↔
OMNI OUT 1-8
SLOT1 OUT 1-16
↔
SLOT1 OUT 1-16
SLOT2 OUT 1-16
↔
SLOT2 OUT 1-16
SLOT3 OUT 1-16
↔
SLOT3 OUT 1-16
2TR DIGITAL OUT
↔
2TR DIGITAL OUT
NOTE
NOTE
M7CL V3 Editor Owner’s Manual
8
Stage Box Data Conversion
To open the Stage Box Data Conversion dialog box, click the [Stage Box Data Conversion] button in the System Setup
dialog box.
Use this dialog box to convert HA settings and input patch settings accordingly if, for example, you want to use (on an
M7CL-48ES system) data stored by a system that features SB168-ES units connected to M7CL-48 slots.
A M7CL using External HA via Slot ➞
M7CL-48ES
Converts the patch settings as follows:
(*) The same HA settings will be used.
1
2
3
4
5
1
2
3
4
Internal HA
M7CL-48
Analog devices
M7CL-48
(With MY16-ES64 and
MY16-EX installed)
3 x SB168-ES
3 x SB168-ES
EXT-ES HA
M7CL-48ES
INPUT 1-16
→
(
*
)
SLOT1 IN 1-16
INPUT 17-32
→
(
*
)
SLOT2 IN 1-16
INPUT 33-48
→
(
*
)
SLOT3 IN 1-16
ST IN 1L-4R
→
(
*
)
OMNI IN 1-8
SLOT1 IN 1-16
→
(
*
)
ES IN 1-16
SLOT2 IN 1-16
→
(
*
)
ES IN 17-32
SLOT3 IN 1-16
→
(
*
)
ES IN 33-48
TALKBACK → TALKBACK
OMNI OUT 1-16 → SLOT1 OUT 1-16
SLOT1 OUT 1-16 → ES OUT 1-16
SLOT2 OUT
1-8 → ES OUT 17-24
9-16 → OMNI OUT 1-8
No assignment
→
SLOT2 OUT 1-16
SLOT3 OUT 1-16
→
SLOT3 OUT 1-16
2TR DIGITAL OUT
→
2TR DIGITAL OUT
M7CL V3 Editor Owner’s Manual
9
B M7CL using External HA via Slot ➞
Using Internal HA
Converts the patch settings as follows:
(*) The same HA settings will be used.
C M7CL using Internal HA ➞ Using
External HA via Slot
Converts the patch settings as follows:
(*) The same HA settings will be used.
D M7CL-48ES ➞ Using External HA via
Slot
Converts the patch settings as follows:
(*) The same HA settings will be used.
E [Convert] button
Converts the session using one of the conversion
patterns
1 – 4.
SLOT1 IN 1-16
→
(
*
)
INPUT 1-16
SLOT2 IN 1-16
→
(
*
)
INPUT 17-32
SLOT3 IN 1-16
→
(
*
)
INPUT 33-48
ST IN 1L-4R
→
(
*
)
ST IN 1L-4R
INPUT 1-16
→
(
*
)
SLOT1 IN 1-16
INPUT 17-32
→
(
*
)
SLOT2 IN 1-16
INPUT 33-48
→
(
*
)
SLOT3 IN 1-16
TALKBACK → TALKBACK
SLOT1 OUT 1-16 → OMNI OUT 1-16
OMNI OUT 1-16 → SLOT1 OUT 1-16
SLOT2 OUT 1-16 → SLOT2 OUT 1-16
SLOT3 OUT 1-16 → SLOT3 OUT 1-16
2TR DIGITAL OUT
→
2TR DIGITAL OUT
INPUT 1-16
→
(
*
)
SLOT1 IN 1-16
INPUT 17-32
→
(
*
)
SLOT2 IN 1-16
INPUT 33-48
→
(
*
)
SLOT3 IN 1-16
ST IN 1L-4R
→
(
*
)
ST IN 1L-4R
SLOT1 IN 1-16
→
(
*
)
INPUT 1-16
SLOT2 IN 1-16
→
(
*
)
INPUT 17-32
SLOT3 IN 1-16
→
(
*
)
INPUT 33-48
TALKBACK → TALKBACK
OMNI OUT 1-16 → SLOT1 OUT 1-16
SLOT1 OUT 1-16 → OMNI OUT 1-16
SLOT2 OUT 1-16 → SLOT2 OUT 1-16
SLOT3 OUT 1-16 → SLOT3 OUT 1-16
2TR DIGITAL OUT
→
2TR DIGITAL OUT
SLOT1 IN 1-16 →(*) INPUT 1-16
SLOT2 IN 1-16 →(*) INPUT 17-32
SLOT3 IN 1-16 →(*) INPUT 33-48
OMNI IN 1-8
→
(
*
)
ST IN 1L-4R
ES IN 1-16
→
(
*
)
SLOT1 IN 1-16
ES IN 17-32
→
(
*
)
SLOT2 IN 1-16
ES IN 33-48
→
(
*
)
SLOT3 IN 1-16
TALKBACK → TALKBACK
SLOT1 OUT 1-16 → OMNI OUT 1-16
ES OUT 1-16 → SLOT1 OUT 1-16
ES OUT 17-24 →
SLOT2 OUT
1-8
OMNI OUT 1-8 → 9-16
SLOT2 OUT 1-16
→
No assignment
SLOT3 OUT 1-16 → SLOT3 OUT 1-16
2TR DIGITAL OUT → 2TR DIGITAL OUT
M7CL V3 Editor Owner’s Manual
10
Undo/Redo Function
In M7CL Editor, you can cancel the latest operation (Undo) and also cancel the cancellation of the latest operation
(Redo). If you perform an Undo operation twice in a row, you can cancel the two most-recent operations. If you per-
form an Undo operation three times in a row, you can cancel the three most-recent operations. In this way, you can
cancel multiple recent operations.
The following table describes how to use the Undo/Redo function.
Please note, however, that after you perform one of the following operations, you cannot successfully undo or redo
any previous operation:
•Operations on the M7CL console
• Quitting Studio Manager
•Synchronizing with the M7CL console
•Session operations
You cannot Undo or Redo the following operations:
• Edits in the Setup window
• Synchronization
• Opening and closing the windows
• Resizing or moving the windows
• Stage Box Data Conversion
There are certain other operations that cannot be undone, depending on the function.
For library or scene operations, Undo/Redo applies only to the single most recent operation. You cannot
undo any operations prior to this. Undo/Redo in these windows is available only using the [UNDO] button
within the respective window. Even if you perform a scene recall from the Master window, you cannot use
a shortcut or menu operation to undo the recall.
Undo
Choose [Undo] from the [Edit] menu.
Redo
Choose [Redo] from the [Edit] menu.
NOTE
NOTE
M7CL V3 Editor Owner’s Manual
11
Window operations
You can select and open each window from the [Win-
dows] menu. For the INPUT CH window and Effect Edi-
tor window, use the sub-menu to select the channels or
library you want to see.
You can choose Tile or Cascade to arrange the windows within the editor.
In the Library window or Scene window, click the tabs
located at the top of the window to switch between
pages.
● Cascade● Tile
M7CL V3 Editor Owner’s Manual
12
Synchronizing M7CL Editor
When M7CL Editor starts up, the parameter settings on the console and the parameter settings in M7CL Editor may
be different. Therefore, you must first match the parameter settings on the console with those in M7CL Editor. This
operation is called “synchronization.” Follow the steps below to synchronize M7CL Editor.
1 Select [Synchronize], then [Re-synchronize].
The following window opens.
2 Select whether you want to transfer your settings to M7CL
Editor, or vice versa.
At this time, the All Libs option determines whether or not Scene and
Library data is synchronized.
PC ➔ Console: Tr ansfers the current parameter settings in M7CL Editor to your console. On the M7CL-48ES,
the [Stage Box Setup] checkbox will appear. If you want to keep the Stage Box Setup setting of the M7CL-48ES
unit, remove the check from the checkbox.
Console ➔ PC: Tr ansfers the current parameter settings of your console to the M7CL Editor.
3 Click [OK].
Do not operate the console while synchronization is in progress.
If you use the “Recall” function in Studio Manager, all selected Editors in Studio Manager are synchro-
nized with the corresponding devices.
Offline Edit Function
If you do not want to synchronize your console with M7CL Editor, select [Offline Edit] from the [Synchronization]
menu. To apply your off-line edits to your console, select [Re-Synchronize] from the [Synchronization] with the PC
-> Console option to synchronize the console with M7CL Editor.
The Offline Edit function is also activated when you click the [ONLINE]/[OFFLINE] button in the
window.
Some effect parameters in the console change their displayed values depending on the sampling fre-
quency. If you switch M7CL Editor from OFFLINE to ONLINE, displayed parameter values may change
because M7CL Editor loads the sampling frequency from the console and updates the display.
Other Functions
❏
Resetting to the default value (Ctrl( )+click)
Move the cursor to a control or a parameter value, then hold down the <Ctrl>(< >) key and click the mouse
button to reset the value to the default (e.g., to reset a pan setting to Center).
–
∞
❏
Ctrl( )+Shift+Click
Move the mouse cursor to a channel fader or to a send knob or bar graph, and click while holding down the
<Ctrl>(< >) key and <Shift> key to set the nominal value regardless of the default value.
NOTE
NOTE
M7CL V3 Editor Owner’s Manual
13
In the Master window you can synchronize to the M7CL itself, recall scenes, and display the Overview window. To
open this window, choose [Master] from the [Windows] menu.
❏
CHANNEL SELECT
This indicates the number and name of the channel to which your operations will apply. To
switch channels, you can either click the [SELECT] button and choose from the list that
appears, or you can click the left/right arrow-shaped channel select buttons. You can also
use the channel name text box to edit the name.
If the Channel Select / Sends On Fader checkbox in the System Setup dialog box is selected,
this parameter is linked with the [SEL] keys on the M7CL console panel.
You can right-click (<control> key + click) the icon to select a different one.
❏
SENDS ON FADER
This button indicates whether normal mode or SENDS ON FADER mode is engaged.
Click the button to switch modes. When SENDS ON FADER mode is engaged, the Sends
On Fader window appears. (➥ p.79)
If the Channel Select / Sends On Fader checkbox in the System Setup dialog box is selected,
this parameter will be linked with the SEND ON FADER mode setting on the M7CL con-
sole.
Master window
M7CL V3 Editor Owner’s Manual
14
❏ SYNC
This indicates the status of connection and synchronization between M7CL Editor and the M7CL.
A [ONLINE]/[OFFLINE] button
The ONLINE/OFFLINE status will alternate each time you click this button.
This has the same function as [Synchronization] menu ➔[Offline Edit]. (➥ p.12)
This indicator is shown when M7CL Editor is correctly con-
nected to the M7CL itself. In this state, the parameters of M7LC
Editor and the M7CL itself are linked.
This indicator is shown when M7CL Editor and the M7CL itself
are not connected, or when there is a problem with the connec-
tion, or when Offline Edit is selected. In this state, the parame-
ters of M7CL Editor and the M7CL itself are not linked.
B [RE-SYNC] button
Clicking this button opens the Synchronization dialog box.
This has the same function as [Synchronization] menu ➔ [Re-Synchronize]. (➥ p.12)
❏ SCENE MEMORY
Here you can view the currently-recalled scene, and recall or store scenes.
A Scene number display
Indicates the number of the scene that is selected for store or recall.
B Protect indicator
The lock icon is displayed for scenes that are protected. You will be unable to overwrite
or modify the titles of such scenes. For read-only scenes, “R” appears instead.
C Edit indicator
The edit indicator will light when you edit the parameters after recalling a scene.
D [STORE] button
This button stores the current scene into the number shown by the scene number dis-
play (
1).
E [▲]/[▼] buttons
These buttons increment or decrement the number shown in the scene number display
(
1). The scene number display (1) will blink until you actually store or recall, and
while blinking will not match the scene number indicated on the M7CL.
F [RECALL] button
This button recalls the scene of the number shown in the scene number display (1).
1 2
1
4
3
5
6
2
M7CL V3 Editor Owner’s Manual
15
❏ Navigation Keys
Opens the corresponding window in the Overview window.
These are not linked with the navigation key section on the panel of the M7CL itself.
A [17-32] button
Opens the INPUT CH 17–32 window.
B [1-16] button
Opens the INPUT CH 1–16 window.
C [ST IN] button
Opens the ST IN window.
D [DCA] button
Opens the DCA window.
E [STEREO] button
Opens the STEREO/MONO window.
F [MIX] button
Opens the MIX window.
G [MTRX] button
Opens the MATRIX window.
H [33-48] button
Opens the INPUT CH 33–48 window. This button is available during offline editing
only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It is also
available during online editing for the M7CL-48 or M7CL-48ES.
NOTE
1
2
3
4
876
5
M7CL V3 Editor Owner’s Manual
16
INPUT CH window
This window displays the mix parameters of INPUT CH 1–16, 17–32, or 33–48
(
*
)
. The parameters shown in the
window can be selected from the [View] menu or the menu that appears when you right-click (<control> key +
click) in the window.
You can access this window in the following ways.
● From the [Windows] menu, choose [Overview] and select “CH1-16” / “CH17-32” / “CH33-48”
(
*
)
●
Use the navigation keys in the Master window to turn on the [1-16] button / [17-32] button / [33-48] button
(
*
)
●
On the M7CL itself, assign one of the USER DEFINED KEYS to [1-16]/[17-32]/[33-48]
(
*
)
in [INPUT CH] of [M7CL
EDITOR CONTROL], and execute the function
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog
box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.
A Input patch
Click here to select the input source that will be assigned to the INPUT CH, from the
following choices.
(*) AD33-48(INPUT jack 33-48) can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES”
is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48
or M7CL-48ES.
B HA GAIN
Drag the knob in the screen to adjust the gain of the internal head amp or of the exter-
nal head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the INPUT CH.
C 48V
Switches on/off the phantom power (+48V) of the internal head amp or of the external
head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the INPUT CH.
NONE No assignment
IN1–IN48
(
*
)
INPUT jacks 1–48
(
*
)
STIN1L–STIN4R L/R channels of ST IN jacks 1–4
SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16
Input channels of an I/O card installed in slots 1–3
RACK1A, RACK1B...RACK8R(B) L/R outputs of Rack 1–8
Overview window
1
2
3
M7CL V3 Editor Owner’s Manual
17
D Ø (Phase)
Inverts the phase of the signal after AD conversion.
E HPF (High Pass Filter)
Switches the high pass filter on/off. You can drag the numeric value up or down to edit
the cutoff frequency.
F INS (Insert)
Enables/disables the insert-in.
G D. OUT (Direct out)
Enables/disables the direct output.
H EQ (Equalizer)
Switches the EQ on/off. The graph immediately below the button shows the approxi-
mate response of the EQ. Double-click within the graph to open the Selected Channel
window of the corresponding channel. To open the Selected Channel window as an
additional view, hold down the <Ctrl>(< >) key of your computer keyboard and
double-click the graph.
I DYN1/DYN2 (Dynamics 1/Dynamics 2)
Tur ns the two dynamics processors on/off.
If Gate is assigned (Dynamics 1 only), the status of the gate is shown immediately below
the button.
If something other than Gate is assigned, a GR meter is shown immediately below the
button, and the amount of gain reduction is shown while this is on.
The type for each dynamics processor can be selected in the Selected Channel window.
Double-click anywhere other than the DYN1 or DYN2 button to open the Selected
Channel window of the corresponding channel. To open the Selected Channel window
as an additional view, hold down the <Ctrl>(< >) key of your computer keyboard
and double-click anywhere other than the DYN1 or DYN2 button.
J MIX/MATRIX SEND
Switches between the send indications to MIX buses
1–16 and to MATRIX buses 1–8.
The bar graphs located immediately below the button
show the send level of the signals sent from the INPUT
CH to VARI type MIX/MATRIX buses. You can also
drag the bar graph to left or right to set the send level.
While you drag the bar graph, the send level is shown
in the numerical display area for PAN/TO STEREO
MONO (
K).
You can set the minimum value (–∞ dB) by holding
down the <Ctrl>(< >) key of your computer key-
board and clicking the bar graph, or set the nominal
value (0.00 dB) by holding down the <Ctrl>(< >)
key and <Shift> key and clicking the bar graph.
The bar graph display will change according to the
send position (pre/post) and on/off status of the signal
sent from the INPUT CH to the MIX/MATRIX buses.
To switch a send on/off, click the channel number
located at the left of the bar graph.
For FIXED-type MIX buses, the bar graph is fixed at nominal level (0 dB),
and only the on/off status is shown.
In SENDS ON FADER mode, this button enables you to adjust the send
level using the fader.
Gate status
indication
On/off status On On On Off
Open/closed
status
Closed Open Open —
Remarks
Gain reduction amount
is 30 dB or more
Gain reduction
amount is 0–30 dB
Gain reduction
amount is 0 dB
—
4
6
7
8
5
9
J
• Pre/on (green)
• Pre/off (green)
• Post/on (yellow)
• Post/off (yellow)
NOTE
NOTE
M7CL V3 Editor Owner’s Manual
18
K PAN/TO STEREO MONO
The PAN knob adjusts the panning of the signal that is sent from the INPUT CH to the
STEREO bus L/R channels (or the L/C/R channels). You can set this to the center value
by holding down the <Ctrl>(< >) key of your computer keyboard and clicking this
knob.
The [ST] button is an on/off switch for the signal that is sent from the INPUT CH to
the STEREO bus.
The [M(C)] button is an on/off switch for the signal that is sent from the INPUT CH to
the MONO bus.
If LCR MODE is selected in the Selected Channel window, the [LCR] button will appear
instead of the [ST] button and [M(C)] button, and the [LCR] button will be an on/off
switch for the signal that is sent from the INPUT CH to the LCR bus.
L SEL (Select)
Selects the INPUT CH for which you want to perform operations. This is linked with
the INPUT section [SEL] keys on the M7CL console panel.
If the Channel Select / Sends On Fader checkbox in the System Setup dia-
log box is not checked, this will not be linked with the M7CL console.
M CUE
This button cue-monitors the signal of the INPUT CH. This is linked with the INPUT
section [CUE] keys on the M7CL’s panel.
If the Channel Select / Sends On Fader checkbox in the System Setup dia-
log box is not checked, this will not be linked with the M7CL console.
N ON
Switches the INPUT CH or send on/off. In normal mode, this button is linked with the
CH [ON] key in the INPUT section on the M7CL console panel.
The button is color-coded and indicates status as follows:
White: INPUT CH is on (normal mode)
Black: INPUT CH/Send are off.
Other colors: Send is on (SENDS ON FADER mode).
O Fader
Adjusts the input level of the INPUT CH, or the send level. In normal mode, this fader
is linked with the fader in the INPUT section on of the M7CL console panel.
The fader is color-coded and indicates status as follows:
White: You can adjust the input level of the INPUT CH (normal mode).
Gray: INPUT CH is off.
Other colors: You can adjust the send level (SENDS ON FADER mode).
The current fader value is shown in the numerical box located immediately below the
fader.
You can set this to the minimum value (–∞ dB) by holding down the <Ctrl>(< >) key
of your computer keyboard and clicking the fader knob, or set it to the nominal value
(0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the
fader knob.
L
M
N
P
O
Q
K
NOTE
NOTE
M7CL V3 Editor Owner’s Manual
19
The numbers and alphabetical let-
ters at the right of the fader indicate
the DCA group and mute groups to
which that channel belongs, and
show the Recall Safe and Mute Safe
status of the channel.
P Channel number
This is the number of the INPUT CH. You can open the Selected Channel window for
this channel by double-clicking this number. If you hold down the <Ctrl>(< >) key of
your computer keyboard and double-click this, the Selected Channel window will open
as an additional view.
Q Channel name
This is a text box that displays the channel name. You can also edit the channel name in
this text box.
The numbers of DCA groups
to which this channel belongs
are shown in yellow.
The numbers of mute groups to
which this channel belongs are
shown in red.
If this channel is set to
Recall Safe, the R character
is shown in green.
If this channel is set to Mute
Safe, the M character is
shown in green.
M7CL V3 Editor Owner’s Manual
20
ST IN window ( M7CL-32/M7CL-48 only)
In this window you can view and edit the mix parameters of ST IN channels 1–4. The parameters shown in the win-
dow can be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in
the window.
You can access this window in the following ways.
● From the [Windows] menu, choose [Overview] and then choose “ST IN”
● Use the navigation keys in the Master window to turn on the [ST IN] button
A INPUT PATCH
Selects the input source that will be assigned to the ST IN channel. The input sources
that can be assigned are the same as for an INPUT CH (➥ p.16).
B HA GAIN
Drag the knob in the screen to adjust the gain of the internal head amp or of the exter-
nal head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the ST IN channel.
C 48V
Switches on/off the phantom power (+48V) of the internal head amp or of the external
head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the ST IN channel.
D Ø (Phase)
Inverts the phase of the signal after AD conversion.
E HPF (High Pass Filter)
Switches the high pass filter on/off. You can drag the numeric value up or down to edit
the cutoff frequency.
F EQ (Equalizer)
Switches the EQ on/off (the L/R settings are linked). This is the same as the equalizer for
INPUT CH (➥ p.17).
6
2
3
4
1
5
M7CL V3 Editor Owner’s Manual
21
G DYN1/DYN2 (Dynamics 1//Dynamics 2)
These buttons switch the two dynamics processors on/off. This is the same as the
dynamics 1/dynamics 2 for INPUT CH (➥ p.17).
H MIX/MATRIX SEND
Switches between the send indications to MIX buses 1–16 or to MATRIX buses 1–8.
This is the same as the mix/matrix send for INPUT CH (➥ p.17).
I BALANCE
The BALANCE knob adjusts the balance of the signal that is sent from the ST IN chan-
nel to the STEREO bus L/R channels (or the L/C/R channels). Other than the BAL-
ANCE knob, this is the same as PAN/TO STEREO MONO for an INPUT channel
(➥ p.18).
J SEL (Select)
Selects the ST IN channel for which you want to perform operations. (L and R can be
selected separately.) This is linked with the ST IN section [SEL] keys on the M7CL’s
panel.
If the Channel Select / Sends On Fader checkbox in the System Setup dia-
log box is not checked, this will not be linked with the M7CL console.
K CUE
This button cue-monitors the signal of the ST IN channel (L/R are linked). This is
linked with the ST IN section [CUE] keys on the M7CL’s panel.
If the Channel Select / Sends On Fader checkbox in the System Setup dia-
log box is not checked, this will not be linked with the M7CL console.
L ON
Switches the ST IN channel on/off (the L/R settings are linked). This is linked with the
ST IN section CH [ON] keys on the M7CL’s panel.
The button is color-coded and indicates status as follows:
White: ST IN channel is on (normal mode)
Black: ST IN channel/Send are off.
Other colors: Send is on (SENDS ON FADER mode).
M Fader
Adjusts the input level of the ST IN channel. When the M7CL itself is in other than
SENDS ON FADER mode, this is linked with the INPUT section faders of the M7CL’s
panel.
The fader is color-coded and indicates status as follows:
White: You can adjust the input level of the
(normal mode).
Gray:
is off.
Other colors: You can adjust the send level (SENDS ON FADER mode).
The current fader value is shown in the numerical box located immediately below the
fader. This is the same as the fader for INPUT CH (
➥
p.18).
N
Channel number
This is the number of the ST IN channel. You can double-click this number to open the
Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key of
your computer keyboard and double-click this, the Selected Channel window will open
as an additional view.
O
Channel name
This is a text box that displays the channel name. You can also edit the channel name in
this text box.
J
K
L
7
8
9
N
M
O
NOTE
NOTE
M7CL V3 Editor Owner’s Manual
22
MIX window
In this window you can view and edit the parameters of MIX channels 1–16. The parameters shown in the window
can be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in the
window.
You can access this window in the following ways.
●
From the [Windows] menu, choose [Overview] and then choose “MIX”
●
Use the navigation keys in the Master window to turn on the [MIX] button
A
OUTPUT PATCH
Click here to select the output port that will be assigned to the MIX channel, from the
following choices.
If multiple patches have been made, only the first port is shown.
If you change the patching in this window, the port that had been assigned until then
will be cancelled, and only the newly selected port will be assigned.
B
EQ (Equalizer)
Switches the EQ on/off. This is the same as the equalizer for INPUT CH (
➥
p.17).
C
DYN1(Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT
CH (
➥
p.17).
D
INS (Insert)
Enables/disables the insert-in.
ES 1-ES24(M7CL-48ES)
EtherSound output channels 1–24
OMNI1-OMNI8
OMNI OUT jacks 1–8
OMNI9-OMNI16(M7CL-32/48)
OMNI OUT jacks 9–16
SLOT1-1,
SLOT1-2...SLOT3-16
Input channels of an I/O card installed in slot 1–3
RACK1A,
RACK1B...RACK8R(B)
L/R outputs of Rack 1–8
2TROUT L, 2TROUT R
L/R channels of the 2TR OUT DIGITAL jack
4
1
2
3
M7CL V3 Editor Owner’s Manual
23
E
MATRIX SEND
These bar graphs indicate the send levels of the signals sent from the MIX
channel to MATRIX 1–8 bus. You can also adjust the send levels by drag-
ging a bar graph to left or right. While you drag the bar graph, the send
level is shown in the numerical display area for TO STEREO/MONO.
You can set the minimum value (–
∞
dB) by holding down the
<Ctrl>(< >) key of your computer keyboard and clicking the bar
graph, or set the nominal value (0.00 dB) by holding down the
<Ctrl>(< >) key and <Shift> key and clicking the bar graph.
The bar graph display will change as follows according to the send position (pre/post)
and on/off status of the signal sent from the MIX channel to the MATRIX buses.
To switch a send on/off, click the channel number located at the left of the bar graph.
F
PAN/BALANCE
The
PAN knob
adjusts the panning of the signal that is sent from the mix channel to the
STEREO bus L/R channels (or the L/C/R channels). You can set this to the center value
by holding down the <Ctrl>(< >) key of your computer keyboard and clicking this
knob. If assigned as a stereo bus, this adjusts the balance of the odd-numbered channel
and even-numbered channel. The stereo bus setting can be made in Mix Bus Setup of
the Mixer Setup dialogbox.
The
[ST] button
is an on/off switch for the signal that is sent from the mix channel to
the STEREO bus.
The
[MONO] button
is an on/off switch for the signal that is sent from the mix channel
to the MONO bus.
If LCR MODE is selected in the Selected Channel window, the
[LCR]
button will
appear instead of the [ST] button and [MONO] button, and the [LCR] button will be
an on/off switch for the signal that is sent from the mix channel to the LCR bus.
G
VARI/FIXED
Indicates the type (VARI or FIXED) of the currently selected MIX bus. This parameter
can be switched in Mix Bus Setup of the Mixer Setup dialogbox.
H
SEL (Select)
Selects the MIX channel for which you want to make settings.
I
CUE
This button cue-monitors the signal of the MIX channel.
J
ON
Switches the MIX channel on/off.
The button is color-coded and indicates status as follows:
White: MIX channel is on (normal mode).
Black: MIX channel/Send is off.
Other colors: Send is on (SENDS ON FADER mode).
K
Fader
Adjusts the output level of the MIX
channel. The current fader value is
shown in the numeric box immediately
below the fader. You can set this to the
minimum value (–∞ dB) by holding
down the
<Ctrl>(< >) key
of your
computer keyboard and clicking the
fader knob, or set it to the nominal value
(0.00 dB) by holding down the
<Ctrl>(< >) key
and <Shift> key and
clicking the fader knob.
The numbers and alphabetical letters at
the right of the fader indicate the mute
groups to which that channel belongs, and show the Recall Safe and Mute Safe status of
the channel.
The fader is color-coded and indicates status as follows:
White: You can adjust the input level of the MIX channel (normal mode).
Gray: MIX channel is off.
Other colors: You can adjust the send level (SENDS ON FADER mode).
6
5
8
9
J
L
M
7
K
• Pre/on (green))
• Pre/off (green)
• Post/on (yellow)
• Post/off (yellow)
The numbers of mute groups
to which this channel belongs
are shown in red.
If this channel is set to Recall
Safe, the R character is
shown in green.
If this channel is set to Mute
Safe, the M character is
shown in green.
M7CL V3 Editor Owner’s Manual
24
L Channel number
Indicates the number of the MIX channel. You can double-click this number to open the
Selected Channel window for this channel. If you hold down the
<Ctrl>(< >) key
of your
computer keyboard and double-click this, the Selected Channel window will open as an addi-
tional view.
M Channel name
This is a text box that displays the channel name. You can also edit the channel name in
this text box.
MATRIX window
In this window you can view and edit the parameters of MATRIX channels 1–8. The parameters shown in the win-
dow can be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in
the window.
You can access this window in the following ways.
● From the [Windows] menu, choose [Overview] and then choose “MATRIX”
● Use the navigation keys in the Master window to turn on the [MTRX] button
M7CL V3 Editor Owner’s Manual
25
A MIX/CH/ST IN (Send levels from the MIX/INPUT CH/ST IN to
the MATRIX bus)
This switches between indicating the sends from MIX channels 1–16, the sends from
INPUT CH 1–16 / 17–32 / 33–48
(
*
)
, and the sends from ST IN.
The bar graphs located immediately below the button indicate/adjust the level of the
signal that is sent from each channel to the MATRIX bus. The method of operation and
the meaning of the display are the same as for (
5) MATRIX in the MIX window
(➥ p.23).
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in
the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.
B STEREO (Send levels from the STEREO channels to the MATRIX
bus)
Here you can view and edit the send levels of the signals sent from the STEREO chan-
nels to the MATRIX bus. While you drag the bar graph, the send level is shown in the
numerical display area immediately below. The method of operation and the meaning
of the display are the same as for (
5) MATRIX in the MIX window (➥ p.23).
C EQ (Equalizer)
Switches the EQ on/off. The graph immediately below the button shows the approxi-
mate response of the EQ. This is the same as the equalizer for INPUT CH (➥ p.17).
D DYN1(Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT
CH (➥ p.17).
E INS (Insert)
Enables/disables the insert-in.
F SEL (Select)
Selects the MATRIX channel for which you want to make settings.
G CUE
This button cue-monitors the signal of the MATRIX channel.
H ON
This switches the MATRIX channel on/off.
If the corresponding channel is off, the fader will be grayed out.
I Fader
This adjusts the output level of the MATRIX channel. The current fader value is shown
in the numeric box immediately below the fader.
The numbers and alphabetical letters at the right of the fader indicate the mute groups
to which that channel belongs, and show the Recall Safe and Mute Safe status of the
channel. (For the significance of the numbers and alphabetical letters, see ➥ p.18).
J Channel number
Indicates the number of the MATRIX channel. You can double-click this number to
open the Selected Channel window for this channel. If you hold down the
<Ctrl>(< >) key of your computer keyboard and double-click this, the Selected
Channel window will open as an additional view.
4
5
6
7
8
J
3
1
2
9
M7CL V3 Editor Owner’s Manual
26
STEREO/MONO window
In this window you can view and edit the parameters of the STEREO and MONO channels. The parameters shown
in the window can be selected from the [View] menu or the menu that appears when you right-click (<control> key
+ click) in the window.
You can access this window in the following ways.
● From the [Windows] menu, choose [Overview] and then choose “STEREO/MONO”
● Use the navigation keys in the Master window to turn on the [STEREO] button
A EQ (Equalizer)
Switches the EQ on/off (the L/R settings are linked). This is the same as the equalizer for
INPUT CH (➥ p.17).
B DYN1(Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT
CH (➥ p.17).
C INS (Insert)
Enables/disables the insert-in. (The L/R settings are linked.)
D MATRIX SEND
Here you can view and edit the send levels of the signals sent from the STEREO/MONO
channel to MATRIX 1–8 bus. The method of operation and the meaning of the display
are the same as for MATRIX in the MIX window (➥ p.23).
1
3
4
2
M7CL V3 Editor Owner’s Manual
27
E BALANCE
Adjusts the left/right balance of the STEREO channel.
For MONO channels, this control indicates the send level to the MATRIX bus.
F SEL (Select)
Selects the channel for which you want to make settings. (You can specify L and R inde-
pendently.) This is linked with the STEREO/MONO MASTER section [SEL] keys on
the M7CL’s panel.
G CUE
This button cue-monitors the signal of the STEREO/MONO channel. This is linked
with the STEREO/MONO MASTER section [CUE] keys on the M7CL’s panel.
H ON
This switches the STEREO/MONO channel on/off. This is linked with the STEREO/
MONO MASTER section [ON] keys on the M7CL’s panel.
The button is color-coded and indicates status as follows:
White: STEREO/MONO channel is on (normal mode).
Black: STEREO/MONO channel/Send is off.
Other colors: Send is on (SENDS ON FADER mode).
I Fader
Adjusts the output level of the STEREO/MONO channel. This is linked with the STE-
REO/MONO MASTER section faders of the M7CL’s panel.
The current fader value is shown in the numeric box immediately below the fader.
The numbers and alphabetical letters at the right of the fader indicate the mute groups
to which that channel belongs, and show the Recall Safe and Mute Safe status of the
channel. (For the significance of the numbers and alphabetical letters, see ➥ p.21).
The fader is color-coded and indicates status as follows:
White: You can adjust the input level of the STEREO/MONO channel (nor-
mal mode).
Gray: STEREO/MONO channel is off.
Other colors: You can adjust the send level (SENDS ON FADER mode).
J Channel number
This is the channel number (ST or M). You can double-click this number to open the
Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key of
your computer keyboard and double-click this, the Selected Channel window will open
as an additional view.
J
8
6
7
5
9
M7CL V3 Editor Owner’s Manual
28
DCA window
In this window you can view and edit the parameters of DCA groups 1–8.
You can access this window in the following ways.
● From the [Windows] menu, choose [Overview] and then choose “DCA”
● Use the navigation keys in the Master window to turn on the [DCA] button
A CUE
This button cue-monitors all channels that are assigned to the DCA group.
B ON
If you turn this on, all channels assigned to the DCA group will be turned on. If you
turn this off, no signal will be output from the channels assigned to the DCA group.
If this button is off, the fader will be grayed out.
C DCA fader
This fader adjusts the level of the DCA group.
The current fader value is shown in the numeric box immediately below the fader.
You can set this to the minimum value (–∞ dB) by holding down the <Ctrl>(< >) key
of your computer keyboard and clicking the fader knob, or set it to the nominal value
(0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the
fader knob. If the fader is at nominal level, the green indicator at the right of the fader
will light.
If a DCA group is set to Recall Safe, the R character at the lower right of the fader is dis-
played in green.
D DCA number
This is the number of the DCA group.
E DCA group name
This is a text box that displays the DCA group name. You can also edit the DCA group
name in this text box.
5
1
2
3
4
M7CL V3 Editor Owner’s Manual
29
Here you can set the parameters of the currently selected input channel (INPUT CH 1–48
(
*
)
, ST IN channels 1–4) or
output channel (MIX channels 1–16, MATRIX channels 1–8, STEREO/MONO channels).
You can access this window in the following ways.
● From the [Windows] menu, choose [Selected Channel] and select “MAIN VIEW”
● Double-click the channel number, EQ, DYN1, or DYN2 button in one of the Overview windows.
● On the M7CL itself, assign one of the USER DEFINED KEYS to [1-16]/[17-32]/[33-48]
(
*
)
in [SEL CH] of [M7CL EDI-
TOR CONTROL], and execute the function
By choosing [Selected Channel] from the [Windows] menu and then selecting “ADDITIONAL VIEW,” you
can view a window for a channel that is not selected. This ADDITIONAL VIEW is not linked with [SEL] key
operations on the panel of the M7CL.
The type of parameters that can be edited in this window depends on the type of the currently selected channel. The
parameters of the Selected Channel window are explained below, in the order of input channels (input channels 1–
48, ST IN channels 1–4), MIX channels, MATRIX channels, and STEREO/MONO channels.
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box.
It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.
If an input channel is selected
Selected Channel window
NOTE
● INPUT CH window
M7CL V3 Editor Owner’s Manual
30
Unless otherwise specified, the parameters explained below are common to INPUT CH 1–48 and ST IN
channels 1–4.
❏ CHANNEL SELECT (Channel selection)
A SELECT (Channel selection)
Indicates the number and name of the channel you are editing. To switch channels, use the SELECT button or the
triangle buttons at left and right. The channel selected in the Main View is linked with the [SEL] keys in the
INPUT section of the M7CL’s panel. You can right-click (<control> key + click) the icon and select the desired
choice. You can also edit the channel name in the text box.
B LIBRARY
Accesses the Input Channel Library. Click this button to open the INPUT CH page of the Library window.
C INPUT PATCH
Selects the input source assigned to the input channel (for the selectable input sources, ➥ p.16).
● ST IN channel window
NOTE
1 2
3
M7CL V3 Editor Owner’s Manual
31
❏ TO MIX/TO MATRIX SEND
A MIX/MATRIX send level
This adjusts the send level of the signal sent from the input channel to VARI-type MIX bus and MATRIX bus. The
current value is shown in the numerical box immediately below.
B PRE (PRE/POST)
This selects PRE or POST as the point from which the signal is sent from the input channel to the MIX bus and
MATRIX bus. The point will be PRE POINT when this is on, and POST FADER when this is off. The PRE POINT
setting can be specified in the Mixer Setup dialogbox.
Right-click the PRE button to display a context-sensitive menu that will enable you to specify ALL PRE,
ALL POST, or other options.
C ON (MIX/MATRIX send on/off)
This is an on/off switch for the signal sent from the input channel to the MIX bus and MATRIX bus.
• If MIX buses or MATRIX buses are being used in stereo, the
odd-numbered knob will be PAN.
• If the FIXED type is selected for the MIX bus, only the ON but-
ton is valid.
• The stereo/mono setting and the VARI type / FIXED type setting can be made in the Mixer Setup dialogbox.
D Channel name
This section indicates the name of the MIX channel or MATRIX channel.
❏ HA GAIN/Ø/HPF
A HA (HA Gain)
Adjusts the gain of the internal head amp or of the external head amp (e.g., Yamaha AD8HR, SB168-ES) patched
to the input channel. The current value is shown in the numerical box below the knob. You can set this to the
default value (+10 dB) by holding down the <Ctrl>(< >) key and clicking the knob. You can also use the [48V]
button to switch phantom power on/off.
B Ø (Phase)
Inverts the phase of the signal after AD conversion.
3
1
2
4
NOTE
HINT
Knob of odd-
numbered
side
Knob of odd-num-
bered side
1 32
M7CL V3 Editor Owner’s Manual
32
C HPF (High Pass Filter)
Use the [ON] button at the right to switch the high-pass filter on/off. You can use the knob at left to adjust the
cutoff frequency. The current value is shown in the numerical box below the knob. An indication of “H” will
appear on the EQ graph of the equalizer.
❏ TO STEREO/MONO
Here you can specify how the signal will be sent from the input channel to the STEREO bus / MONO bus.
MODE
• ST/MONO button
When this button is on, the signal will be sent to the STEREO L/R bus and independently to the MONO bus.
• LCR button
When this button is on, the signal will be sent to the L/C/R buses which work in conjunction with each other.
PAN (BALANCE for ST IN)
Adjusts the panning of the signal sent from the input channel to the STEREO bus L/R chan-
nels. You can set this to the center position by holding down the <Ctrl>(< >) key of the
computer keyboard and clicking the knob. This is linked with the [PAN] encoder in the
SELECTED CHANNEL section of the M7CL panel.
ST Switches the signal sent from the input channel to the STEREO bus on/off.
M(C) Switches the signal sent from the input channel to the MONO bus on/off.
PAN (BALANCE for ST IN)
Adjusts the panning of the signal that is sent from the input channel to each of the L/C/R
channels. You can set this to the center position by holding down the <Ctrl>(< >) key of
the computer keyboard and clicking the knob. This is linked with the [PAN] encoder in the
SELECTED CHANNEL section of the M7CL panel.
CSR (Center Side Ratio)
Adjusts the proportion of the CENTER channel level relative to the STEREO bus L/R in a
range of 0–100%.
[INPUT CH 1–48] [ST IN channel 1–4]
[INPUT CH 1–48] [ST IN channel 1–4]
M7CL V3 Editor Owner’s Manual
33
❏ EQUALIZER
A LIBRARY
Accesses the INPUT EQ page of the LIBRARY window.
B ON
Switches the EQ on/off.
C EQ graph
Indicates the response for the EQ of the currently selected channel. To reset the EQ to flat response, hold down
the <Ctrl>(< >) key of your computer keyboard and click the graph (The HPF setting will remain).
D Q
E FREQUENCY
F GAIN
These knobs adjust the Q, center frequency, and boost/cut amount for the four bands LOW, LO-MID, HI-MID,
and HIGH.
G HIGH shelving
If this button is on, the HIGH EQ will be switched to a shelving type (the Q knob of the HIGH EQ will disap-
pear).
H LPF (Low Pass Filter)
If this button is on, the HIGH EQ will function as a low pass filter. The Q knob of the HIGH EQ will disappear,
and the GAIN knob will act as the low pass filter on/off switch.
I LOW shelving
If this button is on, the LOW EQ will be switched to a shelving type (the Q knob of the LOW EQ will disappear).
J TYPE I/TYPE II (EQ type)
Selects either TYPE I (the algorithm used by previous digital mixers) or TYPE II (a newly developed algorithm) as
the EQ type.
4
7
8
9
21
3
6
5
K
J
M7CL V3 Editor Owner’s Manual
34
K ATT (Attenuation)
Adjusts the amount of attenuation/gain.
❏ DYNAMICS1/2
You can select one of the following types for each of the two dynamics processors.
If GATE/DUCKING is selected
A TYPE
Indicates the type of the currently selected gate. You can click here to select the type.
B LIBRARY
This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY
window.
C ON
This button switches the gate on/off.
D Response curve
Indicates the response for the gate of the currently selected channel.
E GR meter
This meter indicates the amount of gain reduction.
F THRESHOLD (Threshold level)
Specifies the level at which the gate will open and close. The gate will open when the key-in signal exceeds this
level, and will close when the signal falls below this level.
G RANGE
Specifies the amount by which the signal is attenuated while the gate is closed.
H DECAY
Specifies the time over which the gate will close after the hold time has elapsed.
I ATTACK
Specifies the time from when the key-in signal exceeds the threshold level until the gate opens.
DYNAMICS1: GATE, DUCKING, EXPANDER, COMPRESSOR
DYNAMICS2: COMPRESSOR, COMPANDER-H, COMPANDER-S, DE-ESSER
L
4
J
7
8
6
9
K
1 235
M
M7CL V3 Editor Owner’s Manual
35
J HOLD
Specifies the time that the gate will remain open after the key-in signal falls below the threshold.
K KEY IN SOURCE
Click this to select one of the following signals to use as the key-in source.
L CUE
This button cue-monitors the currently selected key-in signal. This is not shown in the ADDITIONAL VIEW.
M KEY IN FILTER
Select the type of filter applied to the selected key-in signal; HPF (high pass filter), BPF (band pass filter), or LPF
(low pass filter). The ON/OFF button switches the filter on/off.
If you’ve selected BPF, use the two knobs to adjust the band pass frequency and Q. If you’ve selected HPF or LPF,
use the knob to adjust the cutoff frequency.
If COMPRESSOR is selected
A TYPE
Indicates the type of the currently selected compressor. You can click here to select the type.
B LIBRARY
This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY
window.
C ON
This button switches the compressor on/off.
D Response curve
Indicates the response for the compressor of the currently selected channel.
E GR meter
This meter indicates the amount of gain reduction produced by the compressor.
F THRESHOLD
Specifies the threshold level at which the compressor will operate. The input signal will start being compressed
when the key-in signal exceeds this level; compression will be removed when the signal falls below this level.
SELF PRE EQ The pre-EQ signal of the currently selected input channel
SELF POST EQ The post-EQ signal of the currently selected input channel
MIX OUT 13–16
The output signal of the corresponding MIX channel immediately before the output
attenuation
CH 1–48 POST EQ The post-EQ signal of the corresponding input channel (however, you can only choose
channels belonging to the same group, within the seven groups CH1–8, CH9–16,
CH17–24, CH25–32, CH33–40, CH41–48, and STIN1L–STIN4R).
STIN1L–STIN4R POST EQ
1
4
J
7
8
6
9
K
2 3
5
L
M7CL V3 Editor Owner’s Manual
36
G RATIO
Specifies the ratio at which the input signal will be compressed when the key-in signal exceeds the threshold.
H KNEE
Specifies the sharpness at which the output level will change. You can select from HARD or 1–5.
I ATTACK
Specifies the time from when the key-in signal exceeds the threshold level until the signal starts being compressed.
J GAIN
Adjusts the gain of the signal after it has passed through the compressor.
K RELEASE
Specifies the time from when the key-in signal falls below the threshold level until compression is removed.
L KEY IN SOURCE
Click this to select the key-in signal that you want to use.
The choices are the same as for GATE.
If COMPANDER-H, COMPANDER-S is selected
A TYPE
Indicates the type of the currently selected compressor. You can click here to select the type.
B LIBRARY
This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY
window.
C ON
This button switches the compressor on/off.
D Response curve
Indicates the response for the compander of the currently selected channel.
E GR meter
This meter indicates the amount of gain reduction produced by the compressor.
F THRESHOLD
Specifies the threshold level at which the compressor will operate. The input signal will start being compressed
when the key-in signal exceeds this level; compression will be removed when the signal falls below this level.
G RATIO
Specifies the ratio at which the input signal will be compressed when the key-in signal exceeds the threshold.
1
4
L
2 35
J
7
8
6
9
K
M7CL V3 Editor Owner’s Manual
37
H WIDTH
Specifies the width between the threshold level of the compressor (THRESHOLD) and the threshold level of the
expander. The expander effect will apply to levels below THRESHOLD + WIDTH.
I ATTACK
Specifies the time from when the key-in signal exceeds the threshold level until the signal starts being compressed.
J GAIN
Adjusts the gain of the signal after it has passed through the compressor.
K RELEASE
Specifies the time from when the key-in signal falls below the threshold level until compression is removed.
L KEY IN SOURCE
Click this to select the key-in signal that you want to use.
The choices are the same as for GATE.
If DE-ESSER is selected
A TYPE
This indicates that De-Esser is the currently selected type.
B LIBRARY
This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY
window.
C ON
This button switches the de-esser on/off.
D Response curve
Indicates the response for the de-esser of the currently selected channel.
E GR meter
This meter indicates the amount of gain reduction produced by the de-esser.
F THRESHOLD
Specifies the threshold level at which the de-esser will operate. The input signal will start being compressed when
the key-in signal exceeds this level; compression will be removed when the signal falls below this level.
G FREQ. (Minimum frequency)
Specifies the minimum frequency at which the key-in signal will activate the de-esser.
H KEY IN SOURCE
Click this to select the key-in signal that you want to use.
The choices are the same as for GATE.
1
4
7
6
8
2 35
M7CL V3 Editor Owner’s Manual
38
❏ INSERT (except for ST IN channels)
A ON
Enables/disables insert-in/out.
B OUT (Insert out)
Click this to select the output port that will be assigned to insert-out, from the following choices.
C IN (Insert in)
Click this to select the input port that will be assigned to insert-in, from the following choices.
D POINT (Insert point)
Selects the position at which insert-in/out will be patched. Choose from PRE EQ, PRE FADER, or POST ON.
E HA gain (M7CL-48ES)
Adjusts the HA gain for OMNI IN. This knob appears only if you select OMNI as INSERT IN (3).
F 48V (M7CL-48ES)
Switches phantom power (+48V) on/off. This button appears only if you select OMNI as INSERT IN (3).
❏ DIRECT OUT (except for ST IN channels)
A ON
Tur ns the direct output on/off.
B DIRECT OUT GAIN
Adjusts the gain of the direct output. The current value is shown in the numerical box below the knob. You can set
this to the nominal value (0.0 dB) by holding down the <Ctrl>(< >) key and clicking the knob.
NONE No assignment
OMNI 1-OMNI 8(M7CL-48ES) OMNI OUT jacks 1–8
SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 Output channels of an I/O card installed in slots 1–3
RACK1A, RACK1B...RACK8R(B) L/R outputs of Rack 1–8
NONE No assignment
OMNI 1-OMNI 8(M7CL-48ES) OMNI IN jacks 1–8
SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 Input channels of an I/O card installed in slots 1–3
RACK1A, RACK1B...RACK8R(B) L/R inputs of Rack 1–8
1
2 3
4
5
6
1
2 3 4
M7CL V3 Editor Owner’s Manual
39
C DIRECT OUT PORT
Click this to select one of the following output ports as the one used for direct out.
D DIRECT OUT POINT
Selects the position at which direct out will be patched. Choose from PRE HPF, PRE EQ, PRE FADER, or POST
ON.
❏ RECALL SAFE/MUTE SAFE
These enable/disable Recall Safe and Mute Safe for the channel.
❏ DCA GROUP/MUTE GROUP
A DCA GROUP
Selects the DCA group (1–8) to which that channel belongs.
BMUTE GROUP
Selects the mute group (1–8) to which that channel belongs.
❏ Fader
A ON
Switches the input channel on/off. This is linked with the INPUT section CH [ON] keys
on the M7CL’s panel.
If the corresponding channel is off, the fader will be grayed out.
B Fader
Adjusts the input level of the input channel. This is linked with the INPUT section fad-
ers of the M7CL’s panel. A meter indicating the signal level is shown at the right of the
fader, and the current value is shown in the numerical box immediately below. You can
set this to the minimum value (–∞ dB) by holding down the <Ctrl>(< >) key of your
computer keyboard and clicking the fader knob, or set it to the nominal value (0.00 dB)
by holding down the <Ctrl>(< >) key and <Shift> key and clicking the fader knob.
C CUE
This button cue-monitors the signal of the input channel. This is linked with the
INPUT section [CUE] keys on the M7CL’s panel.
NONE No assignment
OMNI 1-8 OMNI OUT jacks 1–8
OMNI 9-16(M7CL-32/48) OMNI OUT jacks 9–16
SLOT1-1, SLOT1-2...SLOT3-16 Output channels of an I/O card installed in slots 1–3
1 2
1
2
3
M7CL V3 Editor Owner’s Manual
40
If a MIX channel is selected
❏ CHANNEL SELECT (Channel selection)
A SELECT (Channel selection)
Except for the fact that your editing applies to a MIX channel, this is
the same as the channel selection for an input channel (➥ p.30).
B LIBRARY
Accesses the Output Channel Library. Click this button to open the
OUTPUT CH page of the Library window.
C INPUT PATCH
Selects the input source assigned to the input channel (for the
selectable input sources, ➥ p.22)
If multiple patches have been made, only the first port is shown.
If you change the patching in this window, the port that had been
assigned until then will be cancelled, and only the newly selected
port will be assigned.
❏ TO MATRIX
A MATRIX send level
This adjusts the send level of the signal sent from the MIX channel to the MATRIX buses.
B PRE (PRE/POST)
Select either PRE or POST as the position from which the signal is sent from the MIX
channel to the MATRIX bus. PRE POINT is selected if this is on, or POST FADER is
selected if this is off. The PRE POINT setting can be made in the Mixer Setup dialogbox.
Right-click the PRE button to display a context-sensitive menu that will enable you
to specify ALL PRE, ALL POST, or other options.
• If you are using MATRIX buses in stereo, the knob for
the odd-numbered bus will be PAN.
• The stereo/mono status can be specified in the Mixer
Setup dialogbox.
2
1
3
2
1
3
4
NOTE
HINT
Knob of odd-
numbered side
M7CL V3 Editor Owner’s Manual
41
C ON (MATRIX send on/off)
This is an on/off switch for the signal sent from the MIX channel to the MATRIX bus.
D Channel name
This section indicates the MATRIX channel name.
❏ TO STEREO/MONO
Here you can specify how the signal will be sent from the MIX channel to the STEREO bus / MONO bus.
MODE
• ST/MONO button
When this button is on, the signal will be sent to the STEREO bus and independently to the MONO bus.
• LCR button
When this button is on, the signal will be sent to the L/C/R buses which work in conjunction with each other.
PAN
Adjusts the panning of the signal sent from the MIX channel to the STEREO bus L/R chan-
nels. You can set this to the center position by holding down the <Ctrl>(< >) key of the
computer keyboard and clicking the knob. This is linked with the [PAN] encoder in the
SELECTED CHANNEL section of the M7CL panel. If the selected MIX bus is used as a ste-
reo bus, the odd-numbered channel is fixed at L63 and the even-numbered channel fixed at
R63.
ST Switches the signal sent from the MIX channel to the STEREO bus on/off.
MONO Switches the signal sent from the MIX channel to the MONO bus on/off.
BALANCE
This is shown only if the selected MIX bus is assigned as a stereo bus. It adjusts the left/
right volume balance of the stereo bus. You can set this to the center position by holding
down the <Ctrl>(< >) key of the computer keyboard and clicking the knob.
PAN
Adjusts the panning of the signal that is sent from the MIX channel to each of the L/C/R
channels. You can set this to the center position by holding down the <Ctrl>(< >) key of
the computer keyboard and clicking the knob. This is linked with the [PAN] encoder in the
SELECTED CHANNEL section of the M7CL panel. If the selected MIX bus is used as a ste-
reo bus, the odd-numbered channel is fixed at L63 and the even-numbered channel fixed at
R63.
BALANCE
This is shown only if the selected MIX bus is assigned as a stereo bus. It adjusts the left/
right volume balance of the stereo bus. You can set this to the center position by holding
down the <Ctrl>(< >) key of the computer keyboard and clicking the knob.
CSR (Center Side Ratio)
Adjusts the proportion of the CENTER channel level relative to the STEREO bus L/R in a
range of 0–100%.
M7CL V3 Editor Owner’s Manual
42
❏ EQUALIZER
A LIBRARY
Accesses the OUTPUT EQ page of the LIBRARY window.
B ON
Switches the EQ on/off.
C EQ graph
Indicates the response for the EQ of the currently selected channel. To reset the EQ to flat response, hold down
the <Ctrl>(< >) key of your computer keyboard and click the graph.
D Q
E FREQUENCY
F GAIN
These knobs adjust the Q, center frequency, and boost/cut amount for the four bands LOW, LO-MID, HI-MID,
and HIGH.
G HIGH shelving
If this button is on, the HIGH EQ will be switched to a shelving type (the Q knob of the HIGH EQ will disappear).
H LPF (Low Pass Filter)
If this button is on, the HIGH EQ will function as a low pass filter. The Q knob of the HIGH EQ will disappear,
and the GAIN knob will act as the low pass filter on/off switch.
I (LOW shelving)
If this button is on, the LOW EQ will be switched to a shelving type (the Q knob of the LOW EQ will disappear).
J HPF (High Pass Filter)
If this button is on, the LOW EQ will function as a high pass filter EQ. The Q knob of the LOW EQ will disappear,
and the GAIN knob will act as the high pass filter on/off switch.
K TYPE I/TYPE II (EQ type)
Selects either TYPE I (the algorithm used by previous digital mixers) or TYPE II (a newly developed algorithm) as
the EQ type.
L ATT (Attenuation)
Adjusts the amount of attenuation/gain.
6
21
3
5
L
4
7
9
8
K
J
M7CL V3 Editor Owner’s Manual
43
❏ DYNAMICS1
Except for the fact that the available types are COMPRESSOR, EXPANDER, COMPAND H and COMPAND S,
and that you can select more than one signal as the key-in signal, this is the same as the dynamics for input chan-
nels (➥ p.34).
❏ INSERT
Except for the fact that the insert points that can be selected are different, this is the same as for the insert settings
of an input channel (➥ p.38).
❏ RECALL SAFE/MUTE SAFE
These are the same as the Recall Safe and Mute Safe functions for input channels.
❏ MUTE GROUP
Selects the mute group (1–8) to which the MIX channel belongs.
❏ Pan/Fader
A ON
Switches the MIX channel on/off.
B Fader
Adjusts the output level of the MIX channel. A meter indicating the signal level is
shown at the right of the fader, and the current value is shown in the numerical box
immediately below. You can set this to the minimum value (–∞ dB) by holding down
the <Ctrl>(< >) key of your computer keyboard and clicking the fader knob, or set it
to the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key
and clicking the fader knob.
C CUE
This button cue-monitors the signal of the MIX channel.
1
2
3
M7CL V3 Editor Owner’s Manual
44
If a MATRIX channel is selected
❏ CHANNEL SELECT (Channel selection)
Except for the fact that your editing applies to a MATRIX channel, this is the same as the channel selection for a
MIX channel (➥ p.40).
❏ FROM MIX, ST/MONO
A FROM MIX, ST/MONO send level
These adjust the send levels of the signals sent from the VARI type MIX buses or STEREO/MONO buses to the
MATRIX bus. The current value is shown in the numerical box immediately below.
B PRE(PRE/POST)
These select either PRE or POST as the position from which the signal is sent from the MIX buses or STEREO/
MONO buses to the MATRIX bus. PRE POINT is selected if this is on, or POST FADER is selected if this is off.
3
1
2
4
M7CL V3 Editor Owner’s Manual
45
C ON(FROM MIX, ST/MONO send on/off)
These are on/off switches for the signal sent from the MIX buses or STEREO/MONO buses to the MATRIX bus.
• If MIX buses and MATRIX buses are being used in stereo, the
odd-numbered knob will be PAN.
• If the FIXED type is selected for the MIX bus, only the ON but-
ton is valid.
• The stereo/mono setting and the VARI type / FIXED type setting can be made in the Mixer Setup dialogbox.
D Channel name
This section indicates the name of the MIX channel or STEREO/MONO channel.
❏ BALANCE
This is shown only if the selected MATRIX bus is being used as stereo. It adjusts the left/right volume balance of
the stereo signal. You can set this to the center value by holding down the <Ctrl>(< >) key of your computer
keyboard and clicking this knob.
❏ EQUALIZER
This is the same as for the equalizer of a MIX channel (➥ p.42).
❏ DYNAMICS1
Except for the fact that the available types are COMPRESSOR, EXPANDER, COMPAND H and COMPAND S,
and that you can select more than one signal as the key-in signal, this is the same as the dynamics for input chan-
nels (➥ p.34).
❏ INSERT
Except for the fact that the insert points that can be selected are different, this is the same as for the insert settings
of an input channel (➥ p.38).
❏ RECALL SAFE/MUTE SAFE
These are the same as the RECALL SAFE/MUTE SAFE of a MIX channel (➥ p.43).
❏ MUTE GROUP
These are the same as the MUTE GROUP of a MIX channel (➥ p.43).
HINT
PAN (odd-numbered side)
M7CL V3 Editor Owner’s Manual
46
❏ Fader
A ON
This switches the MATRIX channel on/off.
B Fader
This adjusts the output level of the MATRIX channel. A meter indicating the signal level
is shown at the right of the fader, and the current value is shown in the numerical box
immediately below. You can set this to the minimum value (–∞ dB) by holding down
the <Ctrl>(< >) key of your computer keyboard and clicking the fader knob, or set it
to the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key
and clicking the fader knob.
C CUE
This button cue-monitors the signal of the MATRIX channel.
1
2
3
M7CL V3 Editor Owner’s Manual
47
If a STEREO/MONO channel is selected
❏ CHANNEL SELECT (Channel selection)
Except for the fact that your editing applies to a STEREO/MONO channel, this is the same as the channel selec-
tion for a MIX channel (➥ p.40).
❏ TO MATRIX
These are the same as the TO MATRIX of a MIX channel (➥ p.40).
● STEREO channel window
● MONO channel window
M7CL V3 Editor Owner’s Manual
48
❏ BALANCE (except for MONO channel)
This adjusts the left/right volume balance in the STEREO bus. You can set this to the center value by holding
down the <Ctrl>(< >) key of your computer keyboard and clicking this knob.
❏ EQUALIZER
This is the same as the equalizer settings of a MIX channel (➥ p.42).
❏ DYNAMICS1
Except for the fact that the available types are COMPRESSOR, EXPANDER, COMPAND H and COMPAND S,
and that you can select more than one signal as the key-in signal, this is the same as the dynamics for input chan-
nels (➥ p.34).
❏ INSERT
Except for the fact that the insert points that can be selected are different, this is the same as for the insert settings
of an input channel (➥ p.38).
❏ RECALL SAFE/MUTE SAFE
These are the same as the RECALL SAFE/MUTE SAFE of a MIX channel (➥ p.43).
❏ MUTE GROUP
These are the same as the MUTE GROUP of a MIX channel (➥ p.43).
❏ Fader
A ON
This switches the STEREO/MONO channel on/off. This is
linked with the STEREO/MONO MASTER section [ON]
keys on the M7CL’s panel.
B Fader
Adjusts the output level of the STEREO/MONO channel.
This is linked with the STEREO/MONO MASTER section
faders of the M7CL’s panel. A meter indicating the signal level
is shown at the right of the fader, and the current value is
shown in the numerical box immediately below.
C CUE
This button cue-monitors the signal of the STEREO/MONO
channel. This is linked with the STEREO/MONO MASTER
section [CUE] keys on the M7CL’s panel.
1
2
3
1
2
3
STEREO MONO
M7CL V3 Editor Owner’s Manual
49
Here you can edit the M7CL’s various libraries. You can also load library files that were saved on a drive of your com-
puter, edit the order or title of library items, recall the desired library data, or copy desired library data to a library
within the M7CL.
This window is divided into DYNAMICS, INPUT EQ, OUTPUT EQ, EFFECT, GEQ, INPUT CH, and OUTPUT CH
pages; to switch pages, click the tabs located at the top of the window.
To display this window, choose [LIBRARY] from the [Windows] menu, and select either “DYNAMICS,” “INPUT
EQ,” “OUTPUT EQ,” “EFFECT,” “GEQ,” “INPUT CH,” or “OUTPUT CH.”
A OPEN (Open a file)
Opens a library file located on a drive of your computer. Use this when you want to edit library data that you’ve
saved on a USB storage device.
B CLOSE (Close a file)
Closes the currently-open library file.
C SAVE
Saves the currently-open library file on a drive of your computer. Use this to re-save an edited library on a USB
storage device, or to create a backup on the hard disk of your computer.
D SAVE AS (Save under a different name)
Saves the currently-open library file under a different name on a drive of your computer.
E File name
Indicates the file name of the currently-open library.
Library window
5
1 2 3 4
M7CL V3 Editor Owner’s Manual
50
F FILE
This list shows the contents of the data in the library file you opened using the OPEN button (1). The list
includes the following items.
G No. (Number)
This column indicates the number of each item in the library.
H TITLE
This column indicates the title assigned to each library item. You can also double-click this area and edit the title.
I READ ONLY
Read-only data is indicated by an “R” in this column. It cannot be overwritten, nor can its title be edited.
J TYPE
This column indicates the effect type.
In the case of dynamics, there is also an indication of the dynamics processor(s) of this channel into which each
library item can be recalled. Only library items with an indication of “1” can be recalled to DYNAMICS 1, and
only library items with an indication of “2” can be recalled to DYNAMICS 2. Library items with neither of these
indications cannot be recalled to this channel.
K DYNAMICS (DYNAMICS page only)
Select which of the two dynamics processors will be subject to the Store or Recall operation.
L RACK No. (Rack selection) (Effect/GEQ page only)
Select which rack will be subject to the Store or Recall operation.
HQ Pitch and Freeze cannot be recalled to an effect module mounted in Rack 6 or Rack 8.
M INTERNAL DATA
This area shows the M7CL’s scene memory contents. The items displayed are the same as in the FILE list (6).
As desired, you can copy single or multiple scenes between the FILE list and the INTERNAL DATA list, and copy
or move them to a different location within a list.
N
O
P
Q
78 9J
M
6
K
L
(DYNAMICS page only)
(Effect/GEQ page only)
NOTE
M7CL V3 Editor Owner’s Manual
51
To do this, use the following methods to select the scene(s) that you want to copy or move.
•To select a single scene
Click the line containing the desired scene.
•To select multiple consecutive scenes
Click the first scene to select it; then hold down the <Shift> key and
click the last scene.
•To select multiple non-consecutive scenes
Click the first scene; then hold down the <Ctrl>(< >) key and click
each of the remaining scenes.
When you have selected the scene(s) that you want to move or copy, drag them to the desired location in the other
list (if you’re copying between lists) or in the same list (if you’re copying/moving within the same list).
•To copy scenes (overwriting the destination)
Drag the copy-source scene(s) to the desired line in the other list or to
another line in the same list. At this time, a ® symbol will appear at
the right of the scene number.
When you drop the scene in this state, a dialog box will appear, asking
you to confirm the Save operation. If you click the OK button, the
copy-source scene(s) will be overwritten onto the copy-destination
scenes, and the copy-source scene(s) will remain unchanged. (If the
copy-source selection contains multiple scenes, the data will be over-
written onto consecutive scenes starting at that scene.)
•To move scenes
Within the same list, you can move the selected scene(s) to another
location to rearrange the order of the scenes in the list. To do this,
drag the selected scene(s) to a location between two other lines in the
same list. At this time, a symbol will appear between the lines.
When you release the mouse button in this state, the selected scene(s)
will move to that location, and the scene numbers will also change
accordingly. (If the move-source selection contains multiple scenes,
those scenes will be inserted consecutively at the location you specify.)
You cannot copy the InitialData of the GEQ library.
N STORE
Stores the current settings to the data item that is selected in the list.
O RECALL
Recalls the data item that is selected in the list.
P CLEAR
Clears the data item(s) selected in the list. (The title of the cleared item(s) will be reset to [No Data!].)
Q UNDO
Cancels the last-performed library recall, store, copy, or move operation.
You can click this repeatedly to repeat Undo and Redo.
NOTE
M7CL V3 Editor Owner’s Manual
52
Here you can assign the input/output port for each channel, its direct output, and its insert-in/out.
This window is divided into INPUT PATCH, OUTPUT PATCH, INPUT INSERT PATCH, OUTPUT INSERT PATCH,
DIRECT OUT PATCH, and PATCH LIST pages. To switch pages, click the tabs shown in the upper part of the window.
To display this window, choose [PATCH Editor] from the [Windows] menu, and select either “INPUT PATCH,”
“OUTPUT PATCH,” “INPUT INSERT PATCH,” “OUTPUT INSERT PATCH,” “DIRECT OUT PATCH,” or “PATCH
LIST.”
INPUT PATCH page
Here you can select the input port that is assigned to the input of each input channel.
❏ PRESET
Initializes the patching in this page.
❏ CLEAR ALL
Clears all patching in this page.
Patch Editor window
M7CL V3 Editor Owner’s Manual
53
OUTPUT PATCH page
Here you can select the input port that is assigned to the output of each output channel.
INPUT INSERT PATCH page
Here you can assign input/output ports to the insert-in/out of each input channel. Select the output port in the left
side of the screen, and the input port in the right side of the screen.
Output port selection Input port selection
M7CL V3 Editor Owner’s Manual
54
OUTPUT INSERT PATCH page
Here you can assign input/output ports to the insert-in/out of each output channel. Select the output port in the left
side of the screen, and the input port in the right side of the screen.
DIRECT OUTPUT PATCH page
Here you can select the output port that will directly output each input channel.
Output port selection Input port selection
M7CL V3 Editor Owner’s Manual
55
PATCH LIST page
Here you can view and edit the input patch and output patch settings.
A Input channel number
B Input channel name
This is the number and name of the input channel. You can click the channel name box to edit the name in this
page.
C Input port
This shows the input port assigned to the input channel. You can click this box and choose the input port from
the popup menu that appears.
D Output channel number
E Output channel name
This is the number and name of the output channel. You can click the channel name box to edit the name in this
page.
F Output port
This shows the output port assigned to the output channel. You can click this box, then choose or cancel the out-
put port from the popup menu that appears.
You can assign multiple output ports.
1 2 3 4 5 6
NOTE
M7CL V3 Editor Owner’s Manual
56
Here you can make settings for GEQ, effects, and external head amps.
This window is divided into GEQ/EFFECT and EXTERNAL HA page (M7CL-32/48) or EXT-ES HA page (M7CL-
48ES). To switch pages, click the tabs located at the top of the window.
GEQ/EFFECT page
Rack window
1 2 3 4 5
6
M7CL V3 Editor Owner’s Manual
57
A Mount
Select a GEQ module or effect module for mounting in the rack, from the following choices.
B Input patch
Select the input port(s) that will be assigned to the rack, from the following choices.
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box.
It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.
This is not shown if nothing is mounted in the rack.
C Module graphic
This area shows a graphic of the GEQ module or effect module that is currently assigned to the rack, and the
parameters of that module. You cannot edit the parameters in this screen.
Double-click this to open the module editor for that rack unit.
By holding down the <Ctrl>(< >) key of your computer keyboard and double-clicking this, you can open mul-
tiple rack module editors. For these additional editors, the rack select buttons are not linked with the RACK
popup window of the M7CL itself.
D Input meter/Output meter
These indicate the level of the signals being input and output from the rack.
E Output patch
Select the output port(s) that will be assigned to the rack, from the following choices.
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box.
It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.
F ON, BYPASS
This switches the GEQ module or effect module between active and bypassed states.
A GEQ module is active when the ON button is lit.
An effect module is active when the BYPASS button is dark.
BLANK No assignment
31BandGEQ 31-band 1-in/1-out graphic equalizer
Flex15GEQ
2-in/2-out graphic equalizer that allows any fifteen of the 31
bands to be controlled
EFFECT Internal effect (only for RACK 5–8)
NONE No assignment
MIX 1–16 MIX channel 1–16
MATRIX1-–8 MATRIX channel 1–8
ST L, ST R, MONO(C) STEREO channel L/R, MONO channel
INS CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
insert in
INS MIX 1–16 MIX channel 1–16 insert in
INS MATRIX1–8 MATRIX channel 1–8 insert in
INS ST L, INS ST R, INS
MONO(C)
Insert-in of STEREO channel L/R or the MONO channel
NONE No assignment
CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
STIN1L-STIN4R ST IN channel 1–4 (L/R)
INS CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
insert out
INS MIX 1–16 MIX channel 1–16 insert out
INS MTRX1–INS MTRX8 MATRIX channel 1–8 insert out
INS ST L, INS ST R, INS
MONO(C)
Insert-out of STEREO channel L/R or the MONO channel
M7CL V3 Editor Owner’s Manual
58
Rack module editor — GEQ window
In this window you can select the insertion destination of GEQ, and edit the parameters.
A Rack No. (Rack selection)
Select the rack module that you want to control.
B LIBRARY
This button accesses the GEQ library. Clicking this button
will open the GEQ page of the LIBRARY window.
● 31BandGEQ
● Flex15GEQ
1
2
M7CL V3 Editor Owner’s Manual
59
C Input patch
Click the CHANNEL field, and choose one of the following as the signal route that will
be patched to the input channel(s) of the currently selected GEQ module.
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected
in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-
48ES.
The channel name is shown in the boxes immediately below.
D Input meter
This indicates the level of the signal that is being input to the currently selected GEQ
module.
E Output patch
Click the CHANNEL field, and choose one of the following as the signal route that will
be patched to the output channel(s) of the currently selected GEQ module.
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected
in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-
48ES.
The channel name is shown in the boxes immediately below.
F Output meter
This indicates the level of the signal that is being output to the currently selected GEQ
module.
NONE No assignment
MIX 1–16 MIX channel 1–16
MATRIX1-–8 MATRIX channel 1–8
ST L, ST R, MONO(C) STEREO channel L/R, MONO channel
INS CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
insert in
INS MIX 1–16 MIX channel 1–16 insert in
INS MATRIX1–8 MATRIX channel 1–8 insert in
INS ST L, INS ST R, INS MONO(C) Insert-in of STEREO channel L/R or the MONO channel
NONE No assignment
CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
STIN1L-STIN4R ST IN channel 1–4 (L/R)
INS CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
insert out
INS MIX 1–16 MIX channel 1–16 insert out
MATRIX INSERT1–8 MATRIX channel 1–8 insert out
INS ST L, INS ST R, INS MONO(C)
Insert-out of STEREO channel L/R or the MONO chan-
nel
3 4
6
5
M7CL V3 Editor Owner’s Manual
60
G ON (GEQ on/off)
Switches the currently selected GEQ module on/off.
H LINK
This button links the settings of two adjacent odd-numbered/even-numbered 31BandGEQ modules, or the group
A and group B settings of a Flex15GEQ. When you click this button, a window will ask you for confirmation.
Click the buttons for the modules you want to use as the parameter copy-source and copy-destination. If you click
the RESET BOTH button, the parameters of both modules will be reset to the default state.
I GEQ graph
This graph shows the response of the currently selected GEQ module.
J GEQ faders
These faders cut/boost the frequency bands of the GEQ module. The value of each fader is shown in the numeri-
cal box below it. Hold down the <Ctrl>(< >) key and click to set the value to 0.00 dB.
K EQ FLAT
This button resets all GEQ faders to the 0 dB position.
L AVAILABLE BANDS (number of operable bands) (Flex15GEQ only)
For a Flex15GEQ, you can operate any fifteen of the thirty-one bands. This numerical display box shows the
remaining number of bands that can be operated. If you have operated fifteen bands, this number will be zero,
and you won’t be able to operate any additional bands. If you want to operate another band in this state, you’ll
need to return a previously-operated band back to the 0 dB position.
7
J
K
8
9
● 31BandGEQ
K
8
7
L
J
● Flex15GEQ
M7CL V3 Editor Owner’s Manual
61
Rack module editor — Effect window
Here you can select the effect type for an internal effect, edit the parameters, and specify the input/output patching.
M7CL V3 Editor Owner’s Manual
62
A Rack No. (Rack selection)
Select the rack module that you want to control.
B BYPASS
This button temporarily bypasses the effect.
C CUE
This button cue-monitors the output of the currently selected
effect.
D EFFECT NAME
Indicates the title of the currently selected effect.
E EFFECT TYPE
Indicates the currently selected effect type. You can also switch the effect type from this window. To do so, click
the text box, and select the desired effect type from the popup menu that appears.
F LIBRARY
This button accesses the effect library. Clicking this button will open the EFFECT page of the LIBRARY window.
G Input patch
Click the L CHANNEL or R CHANNEL area, and choose one of the
following as the signal route that will be patched to the L/R input chan-
nels of the internal effect.
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or
“M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed dur-
ing online editing for the M7CL-48 or M7CL-48ES.
The channel name is shown in the boxes immediately below.
H Input meter
Indicates the level of the signal being input to the internal effect.
I Output patch
Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be
patched to the L/R output channels of the internal effect.
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog
box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.
The channel name is shown in the boxes immediately below.
NONE No assignment
MIX 1–16 MIX channel 1–16
MATRIX1–8 MATRIX channel 1–8
ST L, ST R, MONO(C) STEREO channel L/R, MONO channel
INS CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
insert in
INS MIX 1–16 MIX channel 1–16 insert in
INS MATRIX1–8 MATRIX channel 1–8 insert in
INS ST L, INS ST R, INS
MONO(C)
Insert-in of STEREO channel L/R or the MONO
channel
NONE No assignment
CH 1–48 INPUT CH 1–48
(
*
)
STIN1L–STIN4R ST IN channel 1–4 (L/R)
INS CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
insert out
INS MIX 1–16 MIX channel 1–16 insert out
MATRIX INSERT1–8 MATRIX channel 1–8 insert out
INS ST L, INS ST R, INS MONO(C) Insert-out of STEREO channel L/R or the MONO channel
4
21 3
6
5
8
J
K
7
9
M7CL V3 Editor Owner’s Manual
63
J Output meter
Indicates the level of the signal being output from the internal effect.
K Parameter display select button
If “046 REV-X Hall,” “047 REV-X ROOM,” “048 REV-X PLATE,” or VCM effect is selected as the effect type, this
button switches between the standard parameter screen and a dedicated GUI screen.
L MIX BALANCE
Adjusts the balance of the effect sound relative to the original sound. 0 (%) outputs
only the original sound, and 100 (%) outputs only the effect sound.
M TEMPO
If a tempo-type or modulation-type effect is selected, this allows you to adjust time-
related parameters such as DELAY (delay time) and FREQ. (modulation speed).
To set the value of the TEMPO parameter, you can either input the BPM (Beats Per
Minute) in the numerical box, or repeatedly click the TAP TEMPO button at the
desired tempo.
If the MIDI CLK button is on, the TEMPO parameter value will synchronize to the
MIDI timing clock being received from the MIDI port.
N SOLO
If “044 M.BAND DYNA” or “045 M.BAND COMP” are selected as the effect type, these
buttons allow you to monitor only the specified band from the three bands HIGH,
MID, and LOW.
O GR meter
If “044 M.BAND DYNA” or “045 M.BAND COMP” are selected as the effect type, this
indicates the gain reduction amount for the H (HIGH), M (MID), and L (LOW) bands.
P PLAY/REC (Play/Record) buttons
If “042 FREEZE” is selected as the effect type, you can use these buttons to record and play back the signal being
input to the effect.
Q Effect parameters
This area shows the effect parameters and knobs for the currently selected effect type.
L
M
N
O
P Q
M7CL V3 Editor Owner’s Manual
64
EXTERNAL HA/EXT-ES HA page
The EXT-ES HA page features VIEW switch buttons. Use these buttons to select the virtual rack display
for SB168-ES or for others (AD8HR). If only the SB168-ES is connected, select the virtual rack display for
SB168-ES.
A External HA name
This shows the model name and ID number of the currently connected external head amp device.
B GAIN
This specifies the gain for each channel. The current value is shown in the box below.
C 48V
This switches the phantom power (+48V) on/off for each channel.
D HPF (High Pass Filter)
This switches the HPF on/off for each channel.
E +48V MASTER
If an AD8HR is connected, this indicates the on/off status of the master phantom power supply.
F Slots/Channels
Here you can select the slots/channels to which the audio outputs of the external head amp device are connected.
On the M7CL-48ES, the EXT-ES HA assignment is fixed.
NONE SLOT2 9-16
SLOT1 1-8 SLOT3 1-8
SLOT1 9-16 SLOT3 9-16
SLOT2 1-8
NOTE
1 32 4 5 6
M7CL V3 Editor Owner’s Manual
65
This window shows the signal levels of each section in the M7CL, letting you check for the presence of signals and
whether an overload is occurring.
This window is divided into INPUT METER and OUTPUT METER; to switch pages, click the tabs located at the top
of the window.
In order to view the M7CL’s signal levels in the Meter window, make sure that M7CL Editor and the M7CL
itself are synchronized.
INPUT METER page
A METERING POINT
Select one of the following as the point where metering will occur.
PRE HPF, PRE FADER, POST ON
B PEAK HOLD
Switches peak hold on/off.
C Meters
These peak level meters show the input level of each channel. The current fader value is shown in the box below.
If clipping occurs at any one of the detection points in the channel, the ∑ segment will light.
Meter window
NOTE
1 2
3
M7CL V3 Editor Owner’s Manual
66
OUTPUT METER page
A METERING POINT
Select one of the following as the point where metering will occur.
PRE EQ, PRE FADER, POST ON
B PEAK HOLD
This is the same as in the INPUT METER page.
C Meters
This is the same as in the INPUT METER page.
1 2
3
M7CL V3 Editor Owner’s Manual
67
In this window you can select the channels that will be assigned to each DCA group and mute group. This window is
divided into three pages; the DCA GROUP ASSIGN page, the MUTE GROUP ASSIGN page and CHANNEL LINK
page.
DCA GROUP ASSIGN page
Here you can specify the channels that will be assigned to DCA groups 1–8.
A DCA group
This is the number of the DCA group.
B DCA group name
This is the name of the DCA group. You can also click the mouse on this area to edit the name.
C Grid
This grid lets you assign channels (horizontal rows) to DCA groups (vertical columns). Currently-patched grids
are indicated by a symbol. To enable or disable an assignment, click the desired grid.
D CLEAR
These buttons clear all channels assigned to the corresponding DCA group. When you click one of these buttons a
window will appear, asking you to confirm the operation. To execute the Clear operation, click the OK button.
Group/Link window
1 2 3 4
M7CL V3 Editor Owner’s Manual
68
MUTE GROUP ASSIGN page
Here you can specify the channels that will be assigned to mute groups 1–8. The upper part of the screen lets you
assign input channels to mute groups, and the lower part of the screen lets you assign output channels to mute
groups.
A Mute group
This area shows the mute group number.
B MUTE MASTER
These buttons enable/disable each input channel or output channel mute group.
C Grid
This grid lets you assign channels (horizontal rows) to mute groups (vertical columns). Currently-patched grids
are indicated by a symbol. To enable or disable an assignment, click the desired grid.
D MUTE SAFE ON
These buttons switch Mute Safe on/off for each channel. Channels for which this button is on will be excluded
from mute groups.
E CLEAR
These buttons clear all input channels and output channels assigned to the corresponding mute group. When you
click one of these buttons a window will appear, asking you to confirm the operation. To execute the Clear opera-
tion, click the OK button.
1 2 543
M7CL V3 Editor Owner’s Manual
69
CHANNEL LINK page
If you link two or more input channels, the parameters of these channels will interlock with each other and change
simultaneously.
A Link buttons
Use these buttons to select the link group A–Z
(
*
)
to which you want each input channel to be assigned. If you
don’t want an input channel to be linked, select NONE. You can assign up to twenty-four
(
*
)
groups for INPUT
CH 1–48, and up to two groups for ST IN channels.
(
*
)
During offline editing when M7CL-32 is selected in the System Setup dialogbox, or during online editing with the M7CL-32 con-
nected, up to sixteen groups can be assigned for INPUT CH 1–32, and you’ll be able to choose from link groups A–R.
B CLEAR ALL
Clears the link settings for all channels.
1
2
3
4
M7CL V3 Editor Owner’s Manual
70
C LINK PARAMETER
This section enables you to select the parameters to interlock.
(
*
)
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box.
It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.
The HA and FADER parameters will maintain level differences between linked channels.
D SEND PARAMETER
Specify the link status for each MIX/MATRIX SEND bus.
HA Head amp gain and phantom power settings
AT T Attenuation value
EQ Equalizer settings
DYNAMICS1 Dynamics 1 settings
DYNAMICS2 Dynamics 2 settings
MIX SEND Send amount from input channel to MIX bus
MIX ON MIX SEND on/off
MATRIX SEND Send amount from input channel to MATRIX bus
MATRIX ON MATRIX SEND on/off
FADER Fader level value
CH ON Input channel module output on/off
NOTE
M7CL V3 Editor Owner’s Manual
71
Here you can manage scene memories, and make various settings related to scene recall operations.
This window is divided into SCENE MEMORY, RECALL SAFE, and FADE TIME pages. To switch pages, click the
tabs shown in the upper part of the window.
SCENE MEMORY page
Here you can edit the M7CL’s scene memories. You can also load scene library files from a USB storage device or
from a drive of your computer, and edit them. In this case, you can re-save all scenes to a file after editing, recall just
a desired scene, or copy a desired scene to the scene memory of the M7CL itself.
A File name
Indicates the file name of the currently-open
scene library.
B OPEN (Open a file)
Opens a scene library file located on a drive of
your computer.
C CLOSE (Close a file)
Closes the currently-open scene library file.
D SAVE
Saves the currently-open scene library file on a
drive of your computer.
E SAVE AS (Save as a different
name)
Saves the currently-open scene library file under
a different name on a drive of your computer.
Scene window
1 2 3 4 5
6
M7CL V3 Editor Owner’s Manual
72
F FILE
This area lists the scenes in the file you opened using the OPEN button (2). The list includes the following items.
To view items that are not currently shown, scroll the list to the right.
G No.
This is the scene number.
H TITLE
This is the scene title. You can also double-click this area and edit the title.
I PROTECT
This indicates whether protect is on or off for each scene. This area displays a lock icon for protected scenes; these
scenes cannot be overwritten, nor their title edited. Read-only scenes are indicated by “R” displayed in this col-
umn.
J COMMENT
This column shows the comment assigned to each scene. You can also double-click this column and edit the com-
ment.
K FOCUS
From the following list, choose the parameters that will be recalled by a Scene Recall. If you select ALL, the other
buttons will be unavailable. Multiple selections are allowed for buttons other than ALL.
(
*
)
Can be selected only if OUT is selected
L TIME STAMP
Indicates the time at which the scene was last stored, in the format of month/day/year/hours/minutes/seconds.
This column is only for display, and cannot be edited.
M FADING
This switches fading on/off for each scene.
N FADE TIME
Indicates the FADE TIME for each scene. You can edit the FADE TIME by double-clicking this field.
ALL All the settings of the scene will be recalled
RACK GEQ and internal effect settings will be recalled
HA Internal head amp and external head amp settings will be recalled
IN PATCH Input patch settings will be recalled
OUT PATCH Output patch settings will be recalled
IN
Input channels (INPUT, ST IN, DCA) settings will be recalled except for head
amp settings
OUT Output channel (MIX, MATRIX, STEREO/MONO) settings will be recalled
WITH SEND
(
*
)
Send settings to the output channels will be recalled
HINT
7 8 9 J LK M N
M7CL V3 Editor Owner’s Manual
73
O INTERNAL DATA
This area shows the M7CL’s scene memory contents. The items displayed are the same as in the FILE list (6).
As desired, you can copy single or multiple scenes between the FILE list and the INTERNAL DATA list, and copy
or move them to a different location within a list.
P STORE
Stores the current settings to the scene that is selected in the list.
Q RECALL
Recalls the settings of the scene selected in the list.
R CLEAR
Clears the scene(s) selected in the list. (The title of the cleared scene(s) will be reset to [No Data!].)
S UNDO
Cancels the last-performed scene recall, store, copy, or move operation.
T PROTECT
Tur ns on the Protect setting for the scene(s) selected in the list.
O
P
Q
R
S
N
M7CL V3 Editor Owner’s Manual
74
RECALL SAFE page
Here you can make settings for the Recall Safe function that excludes only specific channels from recall operations of
all scenes.
AINPUT SAFE PARAMETERS
In this area you can view and edit the Recall Safe settings for
all input channels and ST IN channels. This area contains the
following items.
BSAFE ON/OFF
These are on/off buttons that select the channels to be
excluded from recall operations.
CParameter matrix grid
Here you can select the parameters to be excluded from recall
operations. If the ALL button is on, all parameters will be
excluded.
DSET ALL
These buttons turn on all buttons for all input channels or ST
IN channels, or for the corresponding parameter.
ECLEAR ALL
These buttons turn off all buttons for all input channels or ST
IN channels, or for the corresponding parameter.
123
4
5
M7CL V3 Editor Owner’s Manual
75
F OUTPUT SAFE PARAMETERS
In this area you can view and edit the Recall Safe settings for all output channels. The items in this area are the
same as in the Input Safe Parameters area (
1).
G GLOBAL RECALL SAFE
In this area you can view and edit the Recall Safe settings for patching, DCA groups, and racks.
H INPUT PATCH
This on/off button specifies whether INPUT PATCH settings will be excluded from recall operations.
I INPUT NAME
This on/off button specifies whether the channel names of input channels will be excluded from recall operations.
J OUTPUT NAME
This on/off button specifies whether the channel names of output channels will be excluded from recall opera-
tions.
K OUTPUT PATCH
This on/off button specifies whether OUTPUT PATCH settings will be excluded from recall operations.
L DCA
These buttons exclude DCA groups from recall operations. If the ALL button is on, the LEVEL, ON, and DCA
group names will be excluded. If the LEVEL/ON button is on, LEVEL and ON settings will be excluded.
M RACK
This on/off button specifies whether RACK settings will be excluded from recall operations.
N SET ALL
This button switches on all buttons for parameters 8–13.
O CLEAR ALL
This button switches off all buttons for parameters 8–13.
6 7
8
9
J
K
L
M
N
O
M7CL V3 Editor Owner’s Manual
76
FADE TIME page
Here you can make settings for the Fade Time function which adjusts the time over which fader and pan will reach
their new values when a scene is recalled. Since the Fade function settings are independent for each scene, you must
recall the desired scene before you make these settings.
A INPUT CHANNEL FADING ENABLE
These on/off buttons select the input channels that will be excluded from recall operations.
B SET ALL
This button switches on the buttons of all input channels.
C CLEAR ALL
This button switches off the buttons of all input channels.
1
2
3
M7CL V3 Editor Owner’s Manual
77
D OUTPUT CHANNEL FADING ENABLE
These are on/off buttons that select the output channels that will be excluded from recall operations.
E SET ALL
This button switches on the buttons of all output channels.
F CLEAR ALL
This button switches off the buttons of all output channels.
G FADING ENABLE
This button enables/disables the Fade function for the faders of the current scene.
H FADE TIME
Drag this knob in the screen to adjust the fade time. The current value is shown in the numerical box immediately
below.
78
4
5
6
M7CL V3 Editor Owner’s Manual
78
In this window, you can specify the functions or parameters to be assigned to the User Defined keys.
INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the
System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.
A CURRENT USER
Displays the name of the user currently logged into the M7CL console. If the M7CL has not yet been synchro-
nized with the Editor, this field displays
“ Administrator.”
B EDIT
Displays and enables you to specify the user level (Administrator, Guest, or Ext.User) of the User Defined keys
that you are editing.
“Ext.User” is the user who is currently logged into the M7CL console via a user authentication key stored on a USB
storage device. You can select this user only when the M7CL console is synchronized with the Editor.
Ext.User’s User Defined key settings will not be stored in a session file.
C Function names
Select the functions or parameters you wish to assign to the User Defined keys.
Click a User Defined key to open the Parameter List dialog box.
For more information on the assignable parameters, please refer to the
“M7CL Version3 Owner’s Manual.”
User Defined Keys Setup window
1
3
2
NOTE
NOTE
M7CL V3 Editor Owner’s Manual
79
SENDS ON FADER mode enables you to adjust the send level to the MIX/MATRIX bus using the fader. In this mode,
the signals sent from all input channels to a specific MIX/MATRIX bus can be adjusted simultaneously.
Use the SENDS ON FADER button in the Master window to switch this mode on and off.
To display this window, do one of the following:
• Select [Sends on Fader] in the [Windows] menu.
•Click the SENDS ON FADER button in the Master window.
In SENDS ON FADER mode, the color and function of the [ON] button and the fader in the Overview window will
change.
Click the button (in the Sends On Fader window) for the MIX/MATRIX bus for which you want to adjust the send
level. Then switch the send level off or on, and adjust the send level using the [ON] button and fader for the input
channel displayed in the Overview window.
For MATRIX bus send, not only the input channels but MIX channels and STEREO/MONO channels can
be in SEND ON FADER mode.
[ON] button
Color of the send destination Send is on.
Gray Send is off.
Fader
Color of the send destination The signal is sent to the bus.
Gray The signal is NOT sent to the bus.
Sends On Fader window
NOTE
M7CL V3 Editor Owner’s Manual
80
In the Output Port window you can assign the source channel for each output port and set the parameters.
The window includes the following items.
A Output port select tabs
These tabs switch the output ports controlled in the window in groups of up to eight ports.
B DELAY SCALE field
Here you can select the units for the delay time shown below the delay time knob (H).
•METER(343.59m/s)
The delay time is shown as a distance in meters, calculated as the speed of sound (343.59 m/s) at an air temperature of 20°C
(68°F) multiplied by the delay time (seconds).
•FEET(1127.26ft/s)
The delay time is shown as a distance in feet, calculated as the speed of sound (1127.26 feet/s) at an air temperature of 20°C
(68°F) multiplied by the delay time (seconds).
•SAMPLE
The delay time is shown as a number of samples. If you change the sampling frequency at which the M7CL operates, the
number of samples will change accordingly.
•msec
The delay time is shown in units of milliseconds. If this button is on, the same value is displayed above and below the delay
time (
G).
C Output port
This indicates the type and number of the output port to which the channel is assigned.
D Channel select button
This button lets you select the channel that is assigned to the output port.
E Channel name
Indicates the name of the channel that is assigned to the corresponding output port.
F DELAY button
Switches the output port delay on/off.
Output Port window
1
2
3
5
6
7
8
9
J
K
4
M7CL V3 Editor Owner’s Manual
81
G Delay time
The millisecond delay time value is shown above the knob.
The delay time value in the units selected in the DELAY SCALE field (
B) is shown below the knob.
Click the
▲/▼ buttons to make detailed settings.
H Delay time knob
This knob sets the delay time of the output port. Rotate (by dragging) this knob to set the delay time.
I Ø(Phase) button
Switches the phase of the signal assigned to the output port between normal phase (black) and reverse phase
(orange).
J ATT knob
Adjusts the amount of attenuation for the signal assigned to the output port. To change the value, rotate (by drag-
ging) the knob in the screen. You can adjust the setting in 0.1 dB steps over a range of –96 to +24 dB. The current
value is shown immediately below the knob.
K Level meter
This meter indicates the level of the signal assigned to the output port.
M7CL V3 Editor Owner’s Manual
82
(*) It can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be
viewed during online editing for the M7CL-48 or M7CL-48ES.
(**) Modify or cancel the shortcut assignment for the Universal Access Zoom function, or use the number key <8>.
Menu Action
Key operation
Windows Mac
File menu
Creates a new Session Ctrl+N +N
Opens a previously saved Session Ctrl+O +O
Saves the current Session Ctrl+S +S
Edit menu
Undo Ctrl+Z +Z
Redo Ctrl+Y +Y
Windows menu
Closes the active window Ctrl+W +W
Closes all windows Ctrl+Alt+W +Option+W
Tiles all windows Ctrl+T +T
Cascades all windows Ctrl+Alt+T +Option+T
Opens the Master window Ctrl+1 +1
Opens the Sends On Fader window Ctrl+2 +2
Opens the INPUT CH (CH1-16) window Ctrl+Alt+1 +Option+1
Opens the INPUT CH (CH17-32) window Ctrl+Alt+2 +Option+2
Opens the INPUT CH (CH33-48) window
(*)
Ctrl+Alt+3 +Option+3
Opens the ST IN window Ctrl+Alt+4 +Option+4
Opens the MIX window Ctrl+Alt+5 +Option+5
Opens the MATRIX window Ctrl+Alt+6 +Option+6
Opens the STEREO/MONO window Ctrl+Alt+7 +Option+7
Opens the DCA window Ctrl+Alt+8 +Option+8
(**)
Opens the Selected Channel window Ctrl+3 +3
Opens the Library window Ctrl+4 +4
Opens the Patch Editor window Ctrl+5 +5
Opens the Rack window Ctrl+6 +6
Opens the Meter window Ctrl+7 +7
Opens the Group/Link window Ctrl+8 +8
Opens the Scene window Ctrl+9 +9
Synchronization menu
Opens the Re-Synchronize window Ctrl+0 +0
Library window or
SCENE MEMORY page
of the Scene window
Selects consecutive multiple items (memories) Shift+click Shift+click
Selects non-consecutive multiple items (memories) Ctrl+click +click
Selects all memories in a section Ctrl+A +A
Keyboard Shortcuts
PM5D Editor Owner’s Manual
83
B
BYPASS .......................................... 62
C
CLEAR ...................................... 51, 73
CLEAR ALL .................. 52, 69, 74–77
CLOSE ...................................... 49, 71
COMMENT ................................... 72
Ctrl(#)+click .................................. 12
Ctrl(#)+Shift+Click ....................... 12
D
DCA fader ...................................... 28
DCA group ..................................... 67
DCA window ................................. 28
DIRECT OUTPUT PATCH page .54
E
Effect
GR meter .................................. 63
SOLO ........................................ 63
EFFECT module ............................ 61
Effect parameters ........................... 63
EFFECT TYPE ............................... 62
EQ FLAT ........................................ 60
F
Fade ................................................ 77
Fade function (enables/disables) ... 77
FADE TIME page ........................... 76
FADING ENABLE ......................... 76
FILE .......................................... 50, 72
File
Close ................................... 49, 71
Open ................................... 49, 71
FROM MIX, ST/MONO ............... 44
G
GEQ faders ..................................... 60
GEQ graph ..................................... 60
GEQ module .................................. 58
Group/Link window ...................... 67
CHANNEL LINK page ............ 69
DCA GROUP ASSIGN page ... 67
MUTE GROUP ASSIGN page 68
I
INPUT CH window ....................... 16
INPUT INSERT PATCH page ...... 53
INPUT PATCH page ..................... 52
INTERNAL DATA .................. 50, 73
K
Keyboard Shortcuts ....................... 82
L
Library window ............................. 49
M
Master window .............................. 13
MATRIX Bus Setup ....................... 17
MATRIX SEND ............................. 26
MATRIX window .......................... 24
Meter window ................................ 65
MIX BALANCE ............................. 63
MIX Bus Setup ............................... 17
MIX/CH/ST IN .............................. 25
MIX/MATRIX SEND .................... 31
MONO ........................................... 47
Mute group .................................... 68
MUTE MASTER ............................ 68
MUTE SAFE ON ........................... 68
O
Offline Edit .................................... 12
OPEN ........................................49, 71
OUTPUT INSERT PATCH page .. 54
OUTPUT PATCH page ................ 53
Output Port window ..................... 80
P
Patch Editor window ..................... 52
DIRECT OUTPUT PATCH page
54
INPUT INSERT PATCH page 53
INPUT PATCH page ............... 52
OUTPUT INSERT PATCH page .
54
OUTPUT PATCH page ........... 53
PATCH LIST page ................... 55
PATCH LIST page ......................... 55
PLAY/REC ..................................... 63
PROTECT .................................72, 73
R
Rack window ................................. 56
RECALL ....................................51, 73
Recall Safe ...................................... 74
RECALL SAFE page ....................... 74
REDO ............................................. 10
Re-synchronize .............................. 12
S
SAVE .........................................49, 71
SAVE AS ...................................49, 71
Save as a different name .......... 71
Save under a different name ... 49
SCENE MEMORY page ................ 71
Scene window ...........................71, 78
FADE TIME page .................... 76
RECALL SAFE page .................74
SCENE MEMORY page ...........71
Selected Channel window ..............29
Channel selection ...............30, 47
COMPANDER .........................36
COMPRESSOR, EXPANDER ..35
DCA GROUP/MUTE GROUP 39
DE-ESSER .................................37
EQUALIZER .......................33, 42
Fader .............................39, 46, 48
FROM MIX, ST/MONO ..........44
GATE/DUCKING ....................34
HA GAIN/Ø/HP .......................31
Input channel ...........................29
INSERT .....................................38
MATRIX channel .....................44
MIX channel .............................40
MIX/MATRIX SEND ...............31
Pan / Fader ................................43
RECALL SAFE/MUTE SAFE ...39
STEREO/MONO channel ........47
To MATRIX ..............................40
TO STEREO/MONO .........32, 41
Sends On Fader window ................79
Sessions .............................................7
SET ALL ....................................74–77
Setup
Mixer ...........................................4
System .........................................2
ST IN window ................................20
STEREO/MONO window .............26
STORE ......................................51, 73
Synchronize ....................................12
T
Tabs .................................................11
TEMPO ...........................................63
TIME STAMP ................................72
U
UNDO ................................10, 51, 73
User Defined Keys Setup window .78
USER KEY ........................................5
Index
U.R.G., Pro Audio Division
© 2005-2010 Yamaha Corporation
012IP-E0
Transcripción de documentos
M7CL V3 Editor Version 3.5 Owner’s Owner’s Manual Manual Special Notices Contents • The software and this owner’s manual are the exclusive copyrights of Yamaha Corporation. • Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. • Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. • Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. • The screen displays as illustrated in this owner’s manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer. • For information on modification of system software, certain functions, or specifications due to version update of the application, please visit the following website: http://www.yamahaproaudio.com/ • Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. • Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. • The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective companies. Getting Started ......................................... 2 Master window ....................................... 13 Overview window ................................... 16 Selected Channel window....................... 29 Library window ....................................... 49 Patch Editor window ............................... 52 Rack window ........................................... 56 Meter window ......................................... 65 Group/Link window ................................ 67 Scene window ......................................... 71 User Defined Keys Setup window........... 78 Sends On Fader window ......................... 79 Output Port window ............................... 80 Keyboard Shortcuts................................. 82 Index........................................................ 83 * Specifications and descriptions in this owner ’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. ❏ Yamaha Pro Audio Global Site Description of menus and buttons In the event that menu and button names on a Windows system are different from those on a Mac, this manual uses the Windows menu and button names followed by the Mac menu and button names in parentheses. http://www.yamahaproaudio.com/ 1 M7CL V3 Editor Owner’s Manual Getting Started Overview of M7CL V3 Editor M7CL V3 Editor (hereinafter called “M7CL Editor” in this document) enables you to remotely control a Yamaha M7CL mixing console (Version 3) (such as M7CL-48ES, M7CL-48, or M7CL-32; hereinafter collectively called “M7CL” in this document). M7CL Editor also enables you to save the parameter settings on your computer. To use M7CL Editor, you must first perform the following operations: 1 Start and configure Studio Manager. 2 Start and configure M7CL Editor. 3 Synchronize M7CL Editor with your M7CL console (➥ p.12). NOTE For more information on using Studio Manager, refer to the Studio Manager Owner’s Manual. Configuring M7CL Editor You must configure the following settings for each open Editor. NOTE • Before you make the following settings, you must make settings for the DME-N Network Driver (Windows) or the Network-MIDI Driver (Mac) and select the MIDI port in the Setup window of Studio Manager. • To open an editor, double-click the icon for the desired editor in the Studio Manager window. ❏ System Setup To open the System Setup dialogbox, choose [System Setup] from the [File] menu. NOTE Be sure to specify the Input port and Output port. A Input port/Output port From the ports you specified in Studio Manager, select the ports that the editor will use to communicate with the M7CL console. B Model Select This section enables you to make settings for the M7CL model you are using. M7CL-32/M7CL-48/M7CL-48ES Select the model of your M7CL. If M7CL Editor is synchronized with the M7CL console, the model will automatically be selected and other model options will be grayed out. Stage Box Data Conversion Converts HA settings and input patch settings accordingly if, for example, you want to use (on an M7CL-48ES system) data stored by a system that features SB168-ES units connected to M7CL-48 slots. Click the [Conversion…] button to display the Stage Box Data Conversion dialog box for conversion. (➥ p.8) 1 2 3 4 7 5 8 6 9 2 M7CL V3 Editor Owner’s Manual C Channel Select / Sends On Fader This checkbox enables you to specify whether or not the M7CL console and M7CL Editor are linked to each other for the following operations: • Selecting channels • Switching between normal mode and SENDS ON FADER mode • Switching between MIX and MATIRX in SENDS ON FADER mode If you do not check the box, the M7CL console and M7CL Editor will operate independently. D Fast Sync This allows synchronization to be speed up, reducing the time required. Check this box to enable the function. E Window Control From Console This option determines whether or not using the USER DEFINED KEYS on the console enables you to remotely open and close the M7CL Editor windows. F Level Meter By disabling the meter function you can reduce the processing load caused by screen drawing and communication. This option specifies whether the level meter functionality will be enabled. G Confirmation These check boxes specify whether a confirmation dialog box will appear when you store (Store Confirmation), recall (Recall Confirmation), patch (Patch Confirmation), or make a patch change that would modify an existing patch (Steal Patch Confirmation). H Administrator Password Enter the Administrator password that was specified on the M7CL console. If this password is not entered correctly, it will not be possible to synchronize from M7CL Editor to the M7CL console. I Set Default Press this button to use the settings currently specified in the System Setup dialog box as the default settings. The next time when you start up M7CL Editor, it will use these settings. 3 M7CL V3 Editor Owner’s Manual ❏ Mixer Setup To open the Mixer Setup dialogbox, choose [Mixer Setup] from the [File] menu. 1 2 A Mix Bus Setup Here you can make settings relating to the MIX buses. Signal Type: Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered MIX buses. Bus Type/Send Point: Choose either VARI (PRE FADER) or VARI (PRE EQ) or FIXED for each two adjacent odd-numbered/even-numbered MIX buses. Pan Link: The PAN setting for signals sent to stereo MIX buses will link to the PAN setting for the STEREO bus. This parameter is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI. B Matrix Bus Setup Here you can make settings relating to the MATRIX buses. Signal Type: Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered MATRIX buses. Send Point for Input Channels: Choose either PRE FADER or PRE EQ for each two adjacent odd-numbered/even-numbered MATRIX buses. Pan Link: The PAN setting for signals sent to stereo MATRIX buses will link to the PAN setting for the STEREO bus. This parameter is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI. 4 M7CL V3 Editor Owner’s Manual ❏ Creating a user key To open the Create User Key dialogbox, choose [Create User Key] from the [File] menu. This creates a user key (with “.M7U” file name extension) that can be read from a USB storage device by the M7CL console to automatically set user-specific parameters. 1 3 2 5 6 4 7 8 L 9 M J N K O P A User Name Specify the name of the user. You can enter up to eight single-byte alphanumeric characters. Lowercase characters will automatically become uppercase on the M7CL console. B Comment Enter a comment for each user. You can enter up to thirty-two single-byte alphanumeric characters. C Password Enter a password that will be used when this user key is read by the M7CL console. You can enter up to eight single-byte alphanumeric characters. Uppercase and lowercase are distinguished. D Re-Enter Password Enter the password once again as a safeguard against mistaken entry. E POWER USER Specify whether this user is a power user. Power users can use the M7CL console to create or edit a user authentication key with a specified user level. F Administrator Password Enter the Administrator password that was specified on the M7CL console. This is not required if no Administrator password has been specified on the M7CL console, but if this password is incorrect you will be asked to enter it when the user key is read. 5 M7CL V3 Editor Owner’s Manual G ACCESS PERMISSION In this area, specify the parameters that this user will be allowed to operate. H CH OPERATION INPUT, ST IN, DCA, MIX, MATRIX, ST/MONO: Select the channels whose parameters will be operable. HA: Change the operating privileges for the head amp gain and phantom power of the selected channels. PROCESSING: Change the operating privileges for overall signal processing parameters (except for fader and [ON] key) of the selected channel. For the specific parameters included in PROCESSING, refer to the appendix of the M7CL owner’s manual. FADER/ON: Change the operating privileges for the pan/balance, fader, channel on, send on/off, and send level of the selected channels. Set All: Turn on HA, PROCESSING, and FADER/ON for all channels. Clear All: Turn off HA, PROCESSING, and FADER/ON for all channels. Set by One Click: If this button is on, pressing the channel select button repeatedly will set HA, PROCESSING, and FADER/ON to On or Off simultaneously. I SCENE LIST STORE/SORT: Change the operating privileges for scene store and sort operations. RECALL: Change the operating privileges for scene recall operations. J LIBRARY LIST STORE/CLEAR: Change the operating privileges for library store and clear operations. RECALL: Change the operating privileges for library recall operations. K FILE LOAD USER SETUP: Change the operating privileges for loading user-defined keys and preferences when loading a file. SYSTEM SETUP MONITOR SETUP: Change the operating privileges for loading system setup and monitor setup settings when loading a file. CURRENT SCENE: Change the operating privileges for loading the current scene when loading a file. SCENE LIST: Change the operating privileges for loading the scene list when loading a file. LIBRARY LIST: Change the operating privileges for loading the library list when loading a file. L CURRENT SCENE INPUT PATCH: Change the operating privileges for input patch operations. INPUT NAME: Change the privileges for editing the input names. OUTPUT PATCH: Change the operating privileges for output patching. OUTPUT NAME: Change the privileges for editing the output names. BUS SETUP: Change the operating privileges for buses. RACK 1-8: Change the operating privileges for rack operations. MUTE GROUP ASSIGN: Change the privileges for assigning mute groups. MUTE GROUP MASTER: Change the operating privileges for enabling/disabling mute groups. M MONITOR SETUP OSCILLATOR: Change the operating privileges for oscillator settings. TALKBACK: Change the operating privileges for talkback settings. N SYSTEM SETUP MIXER SETUP: Change the privileges for making mixer setup settings. OUTPORT SETUP: Change the privileges for making outport setup settings. MIDI: Change the privileges for making MIDI settings. O Create Creates the user key. P Cancel Closes the dialogbox. 6 M7CL V3 Editor Owner’s Manual Working with Sessions All of your console’s mix settings in M7CL Editor, including Scene and library data, are called Sessions. The following table describes how to handle Sessions. Creating a new Session Opening a previously saved Session Saving the current Session Saving the current Session with a new name Choose [New Session] from the [File] menu. Choose [Open Session] from the [File] menu. Choose [Save Session] from the [File] menu. Choose [Save Session As...] from the [File] menu. When you save a session in the window of an editor, the settings of only that editor will be saved in a file. Session files saved by M7CL Editor have a filename extension of “.YSE”. Files in which only the M7CL console data is saved (filename extension “.M7C”) can also be handled, allowing you to use a USB storage device to exchange data with the M7CL console. If you save a Session in the Studio Manager window, all selected Editor settings are saved in a file with a file extension of “.YSM.” NOTE With M7CL V3 Editor, you can also open files that have been saved on any version of M7CL console or Editor other than version 3 if the files feature the extension “.M7C” or “.YSE”. However, once you save these files on the M7CL V3 console or Editor, you will not be able to open them on the other version of M7CL console or Editor. NOTE If you use the M7CL-48ES console to open a session saved via the M7CL-32/48 console, or if you use the M7CL-32/48 console to open a session saved via the M7CL-48ES, the patch settings will change and the same HA settings will be used as follows: M7CL-32/48 M7CL-48ES INPUT 1-16 ↔(*) ES IN 1-16 INPUT 17-32 ↔(*) ES IN 17-32 INPUT 33-48 ↔(*) ES IN 33-48 ST IN 1L-4R ↔(*) OMNI IN 1-8 SLOT1 IN 1-16 ↔(*) SLOT1 IN 1-16 SLOT2 IN 1-16 ↔(*) SLOT2 IN 1-16 SLOT3 IN 1-16 ↔(*) SLOT3 IN 1-16 TALKBACK ↔ TALKBACK OMNI OUT 1-16 ↔ ES OUT 1-16 No assignment ↔ ES OUT 17-24 No assignment ↔ OMNI OUT 1-8 SLOT1 OUT 1-16 ↔ SLOT1 OUT 1-16 SLOT2 OUT 1-16 ↔ SLOT2 OUT 1-16 SLOT3 OUT 1-16 ↔ SLOT3 OUT 1-16 2TR DIGITAL OUT ↔ 2TR DIGITAL OUT (*) The same HA settings will be used. 7 M7CL V3 Editor Owner’s Manual Stage Box Data Conversion To open the Stage Box Data Conversion dialog box, click the [Stage Box Data Conversion] button in the System Setup dialog box. Use this dialog box to convert HA settings and input patch settings accordingly if, for example, you want to use (on an M7CL-48ES system) data stored by a system that features SB168-ES units connected to M7CL-48 slots. 1 2 3 4 5 Analog devices 3 1 3 x SB168-ES 3 x SB168-ES EXT-ES HA Internal HA 2 4 M7CL-48 (With MY16-ES64 and MY16-EX installed) M7CL-48 M7CL-48ES A M7CL using External HA via Slot ➞ M7CL-48ES Converts the patch settings as follows: INPUT 1-16 →(*) SLOT1 IN 1-16 INPUT 17-32 →(*) SLOT2 IN 1-16 INPUT 33-48 →(*) SLOT3 IN 1-16 ST IN 1L-4R →(*) OMNI IN 1-8 SLOT1 IN 1-16 →(*) ES IN 1-16 SLOT2 IN 1-16 →(*) ES IN 17-32 SLOT3 IN 1-16 →(*) ES IN 33-48 TALKBACK → TALKBACK OMNI OUT 1-16 → SLOT1 OUT 1-16 SLOT1 OUT 1-16 → ES OUT 1-16 1-8 → ES OUT 17-24 9-16 → OMNI OUT 1-8 No assignment → SLOT2 OUT 1-16 SLOT3 OUT 1-16 → SLOT3 OUT 1-16 2TR DIGITAL OUT → 2TR DIGITAL OUT SLOT2 OUT (*) The same HA settings will be used. 8 M7CL V3 Editor Owner’s Manual B M7CL using External HA via Slot ➞ Using Internal HA D M7CL-48ES ➞ Using External HA via Slot Converts the patch settings as follows: SLOT1 IN 1-16 →(*) INPUT 1-16 SLOT2 IN 1-16 →(*) INPUT 17-32 SLOT3 IN 1-16 →(*) INPUT 33-48 ST IN 1L-4R →(*) ST IN 1L-4R INPUT 1-16 →(*) SLOT1 IN 1-16 INPUT 17-32 →(*) SLOT2 IN 1-16 INPUT 33-48 →(*) SLOT3 IN 1-16 TALKBACK → TALKBACK SLOT1 OUT 1-16 → OMNI OUT 1-16 OMNI OUT 1-16 → SLOT1 OUT 1-16 SLOT2 OUT 1-16 → SLOT2 OUT 1-16 SLOT3 OUT 1-16 → SLOT3 OUT 1-16 2TR DIGITAL OUT → 2TR DIGITAL OUT Converts the patch settings as follows: (*) The same HA settings will be used. SLOT1 IN 1-16 INPUT 17-32 →(*) SLOT2 IN 1-16 INPUT 33-48 →(*) SLOT3 IN 1-16 ST IN 1L-4R →(*) ST IN 1L-4R SLOT1 IN 1-16 →(*) INPUT 1-16 SLOT2 IN 1-16 →(*) INPUT 17-32 SLOT3 IN 1-16 →(*) INPUT 33-48 TALKBACK → TALKBACK OMNI OUT 1-16 → SLOT1 OUT 1-16 SLOT1 OUT 1-16 → OMNI OUT 1-16 SLOT2 OUT 1-16 → SLOT2 OUT 1-16 SLOT3 OUT 1-16 → SLOT3 OUT 1-16 2TR DIGITAL OUT → 2TR DIGITAL OUT INPUT 1-16 SLOT2 IN 1-16 →(*) INPUT 17-32 SLOT3 IN 1-16 →(*) INPUT 33-48 OMNI IN 1-8 → ( *) ST IN 1L-4R ES IN 1-16 → ( *) SLOT1 IN 1-16 ES IN 17-32 → ( *) SLOT2 IN 1-16 ES IN 33-48 → ( *) SLOT3 IN 1-16 TALKBACK → TALKBACK SLOT1 OUT 1-16 → OMNI OUT 1-16 ES OUT 1-16 → SLOT1 OUT 1-16 ES OUT 17-24 → 1-8 SLOT2 OUT OMNI OUT 1-8 → SLOT2 OUT 1-16 → No assignment SLOT3 OUT 1-16 → SLOT3 OUT 1-16 2TR DIGITAL OUT → 2TR DIGITAL OUT 9-16 E [Convert] button Converts the patch settings as follows: →(*) →(*) (*) The same HA settings will be used. C M7CL using Internal HA ➞ Using External HA via Slot INPUT 1-16 SLOT1 IN 1-16 Converts the session using one of the conversion patterns 1 – 4. (*) The same HA settings will be used. 9 M7CL V3 Editor Owner’s Manual Undo/Redo Function In M7CL Editor, you can cancel the latest operation (Undo) and also cancel the cancellation of the latest operation (Redo). If you perform an Undo operation twice in a row, you can cancel the two most-recent operations. If you perform an Undo operation three times in a row, you can cancel the three most-recent operations. In this way, you can cancel multiple recent operations. The following table describes how to use the Undo/Redo function. Undo Redo Choose [Undo] from the [Edit] menu. Choose [Redo] from the [Edit] menu. Please note, however, that after you perform one of the following operations, you cannot successfully undo or redo any previous operation: • Operations on the M7CL console • Quitting Studio Manager • Synchronizing with the M7CL console • Session operations NOTE You cannot Undo or Redo the following operations: • Edits in the Setup window • Synchronization • Opening and closing the windows • Resizing or moving the windows • Stage Box Data Conversion There are certain other operations that cannot be undone, depending on the function. NOTE For library or scene operations, Undo/Redo applies only to the single most recent operation. You cannot undo any operations prior to this. Undo/Redo in these windows is available only using the [UNDO] button within the respective window. Even if you perform a scene recall from the Master window, you cannot use a shortcut or menu operation to undo the recall. 10 M7CL V3 Editor Owner’s Manual Window operations You can select and open each window from the [Windows] menu. For the INPUT CH window and Effect Editor window, use the sub-menu to select the channels or library you want to see. You can choose Tile or Cascade to arrange the windows within the editor. ● Tile ● Cascade In the Library window or Scene window, click the tabs located at the top of the window to switch between pages. 11 M7CL V3 Editor Owner’s Manual Synchronizing M7CL Editor When M7CL Editor starts up, the parameter settings on the console and the parameter settings in M7CL Editor may be different. Therefore, you must first match the parameter settings on the console with those in M7CL Editor. This operation is called “synchronization.” Follow the steps below to synchronize M7CL Editor. 1 Select [Synchronize], then [Re-synchronize]. The following window opens. 2 Select whether you want to transfer your settings to M7CL Editor, or vice versa. At this time, the All Libs option determines whether or not Scene and Library data is synchronized. PC ➔ Console: Transfers the current parameter settings in M7CL Editor to your console. On the M7CL-48ES, the [Stage Box Setup] checkbox will appear. If you want to keep the Stage Box Setup setting of the M7CL-48ES unit, remove the check from the checkbox. Console ➔ PC: Transfers the current parameter settings of your console to the M7CL Editor. 3 Click [OK]. Do not operate the console while synchronization is in progress. NOTE If you use the “Recall” function in Studio Manager, all selected Editors in Studio Manager are synchronized with the corresponding devices. Offline Edit Function If you do not want to synchronize your console with M7CL Editor, select [Offline Edit] from the [Synchronization] menu. To apply your off-line edits to your console, select [Re-Synchronize] from the [Synchronization] with the PC -> Console option to synchronize the console with M7CL Editor. The Offline Edit function is also activated when you click the [ONLINE]/[OFFLINE] button in the Master window. NOTE Some effect parameters in the console change their displayed values depending on the sampling frequency. If you switch M7CL Editor from OFFLINE to ONLINE, displayed parameter values may change because M7CL Editor loads the sampling frequency from the console and updates the display. Other Functions ❏ Resetting to the default value (Ctrl( )+click) Move the cursor to a control or a parameter value, then hold down the <Ctrl>(< >) key and click the mouse button to reset the value to the default (e.g., to reset a pan setting to Center). However, the channel faders and the send knobs and bar graphs can be set to –∞ regardless of the default value. ❏ Ctrl( )+Shift+Click Move the mouse cursor to a channel fader or to a send knob or bar graph, and click while holding down the <Ctrl>(< >) key and <Shift> key to set the nominal value regardless of the default value. 12 M7CL V3 Editor Owner’s Manual Master window In the Master window you can synchronize to the M7CL itself, recall scenes, and display the Overview window. To open this window, choose [Master] from the [Windows] menu. ❏ CHANNEL SELECT This indicates the number and name of the channel to which your operations will apply. To switch channels, you can either click the [SELECT] button and choose from the list that appears, or you can click the left/right arrow-shaped channel select buttons. You can also use the channel name text box to edit the name. If the Channel Select / Sends On Fader checkbox in the System Setup dialog box is selected, this parameter is linked with the [SEL] keys on the M7CL console panel. You can right-click (<control> key + click) the icon to select a different one. ❏ SENDS ON FADER This button indicates whether normal mode or SENDS ON FADER mode is engaged. Click the button to switch modes. When SENDS ON FADER mode is engaged, the Sends On Fader window appears. (➥ p.79) If the Channel Select / Sends On Fader checkbox in the System Setup dialog box is selected, this parameter will be linked with the SEND ON FADER mode setting on the M7CL console. 13 M7CL V3 Editor Owner’s Manual ❏ SYNC This indicates the status of connection and synchronization between M7CL Editor and the M7CL. A [ONLINE]/[OFFLINE] button 12 The ONLINE/OFFLINE status will alternate each time you click this button. This has the same function as [Synchronization] menu ➔[Offline Edit]. (➥ p.12) This indicator is shown when M7CL Editor is correctly connected to the M7CL itself. In this state, the parameters of M7LC Editor and the M7CL itself are linked. This indicator is shown when M7CL Editor and the M7CL itself are not connected, or when there is a problem with the connection, or when Offline Edit is selected. In this state, the parameters of M7CL Editor and the M7CL itself are not linked. B [RE-SYNC] button Clicking this button opens the Synchronization dialog box. This has the same function as [Synchronization] menu ➔ [Re-Synchronize]. (➥ p.12) ❏ SCENE MEMORY Here you can view the currently-recalled scene, and recall or store scenes. A Scene number display Indicates the number of the scene that is selected for store or recall. 1 2 3 4 5 6 B Protect indicator The lock icon is displayed for scenes that are protected. You will be unable to overwrite or modify the titles of such scenes. For read-only scenes, “R” appears instead. C Edit indicator The edit indicator will light when you edit the parameters after recalling a scene. D [STORE] button This button stores the current scene into the number shown by the scene number display (1). E [▲]/[▼] buttons These buttons increment or decrement the number shown in the scene number display (1). The scene number display (1) will blink until you actually store or recall, and while blinking will not match the scene number indicated on the M7CL. F [RECALL] button This button recalls the scene of the number shown in the scene number display ( 1). 14 M7CL V3 Editor Owner’s Manual ❏ Navigation Keys Opens the corresponding window in the Overview window. NOTE These are not linked with the navigation key section on the panel of the M7CL itself. 67 8 A [17-32] button Opens the INPUT CH 17–32 window. B [1-16] button 1 Opens the INPUT CH 1–16 window. 2 C [ST IN] button 3 4 Opens the ST IN window. 5 D [DCA] button Opens the DCA window. E [STEREO] button Opens the STEREO/MONO window. F [MIX] button Opens the MIX window. G [MTRX] button Opens the MATRIX window. H [33-48] button Opens the INPUT CH 33–48 window. This button is available during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It is also available during online editing for the M7CL-48 or M7CL-48ES. 15 M7CL V3 Editor Owner’s Manual Overview window INPUT CH window This window displays the mix parameters of INPUT CH 1–16, 17–32, or 33–48 (*). The parameters shown in the window can be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in the window. You can access this window in the following ways. ● ● ● From the [Windows] menu, choose [Overview] and select “CH1-16” / “CH17-32” / “CH33-48”(*) Use the navigation keys in the Master window to turn on the [1-16] button / [17-32] button / [33-48] button(*) On the M7CL itself, assign one of the USER DEFINED KEYS to [1-16]/[17-32]/[33-48](*) in [INPUT CH] of [M7CL EDITOR CONTROL], and execute the function (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. A Input patch 1 2 3 Click here to select the input source that will be assigned to the INPUT CH, from the following choices. NONE No assignment IN1–IN48(*) INPUT jacks 1–48(*) STIN1L–STIN4R SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 RACK1A, RACK1B...RACK8R(B) L/R channels of ST IN jacks 1–4 Input channels of an I/O card installed in slots 1–3 L/R outputs of Rack 1–8 (*) AD33-48(INPUT jack 33-48) can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. B HA GAIN Drag the knob in the screen to adjust the gain of the internal head amp or of the external head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the INPUT CH. C 48V Switches on/off the phantom power (+48V) of the internal head amp or of the external head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the INPUT CH. 16 M7CL V3 Editor Owner’s Manual D Ø (Phase) Inverts the phase of the signal after AD conversion. E HPF (High Pass Filter) 4 Switches the high pass filter on/off. You can drag the numeric value up or down to edit the cutoff frequency. F INS (Insert) 5 Enables/disables the insert-in. 6 7 8 G D. OUT (Direct out) 9 I DYN1/DYN2 (Dynamics 1/Dynamics 2) J Enables/disables the direct output. H EQ (Equalizer) Switches the EQ on/off. The graph immediately below the button shows the approximate response of the EQ. Double-click within the graph to open the Selected Channel window of the corresponding channel. To open the Selected Channel window as an additional view, hold down the <Ctrl>(< >) key of your computer keyboard and double-click the graph. Turns the two dynamics processors on/off. If Gate is assigned (Dynamics 1 only), the status of the gate is shown immediately below the button. Gate status indication On/off status On On On Off Open/closed status Closed Open Open — Remarks Gain reduction amount Gain reduction is 30 dB or more amount is 0–30 dB Gain reduction amount is 0 dB — If something other than Gate is assigned, a GR meter is shown immediately below the button, and the amount of gain reduction is shown while this is on. The type for each dynamics processor can be selected in the Selected Channel window. Double-click anywhere other than the DYN1 or DYN2 button to open the Selected Channel window of the corresponding channel. To open the Selected Channel window as an additional view, hold down the <Ctrl>(< >) key of your computer keyboard and double-click anywhere other than the DYN1 or DYN2 button. J MIX/MATRIX SEND Switches between the send indications to MIX buses 1–16 and to MATRIX buses 1–8. The bar graphs located immediately below the button show the send level of the signals sent from the INPUT CH to VARI type MIX/MATRIX buses. You can also drag the bar graph to left or right to set the send level. While you drag the bar graph, the send level is shown in the numerical display area for PAN/TO STEREO MONO (K). You can set the minimum value (–∞ dB) by holding down the <Ctrl>(< >) key of your computer keyboard and clicking the bar graph, or set the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the bar graph. The bar graph display will change according to the send position (pre/post) and on/off status of the signal sent from the INPUT CH to the MIX/MATRIX buses. To switch a send on/off, click the channel number located at the left of the bar graph. • Pre/on (green) • Pre/off (green) • Post/on (yellow) • Post/off (yellow) NOTE For FIXED-type MIX buses, the bar graph is fixed at nominal level (0 dB), and only the on/off status is shown. NOTE In SENDS ON FADER mode, this button enables you to adjust the send level using the fader. 17 M7CL V3 Editor Owner’s Manual K PAN/TO STEREO MONO K L M N O The PAN knob adjusts the panning of the signal that is sent from the INPUT CH to the STEREO bus L/R channels (or the L/C/R channels). You can set this to the center value by holding down the <Ctrl>(< >) key of your computer keyboard and clicking this knob. The [ST] button is an on/off switch for the signal that is sent from the INPUT CH to the STEREO bus. The [M(C)] button is an on/off switch for the signal that is sent from the INPUT CH to the MONO bus. If LCR MODE is selected in the Selected Channel window, the [LCR] button will appear instead of the [ST] button and [M(C)] button, and the [LCR] button will be an on/off switch for the signal that is sent from the INPUT CH to the LCR bus. L SEL (Select) Selects the INPUT CH for which you want to perform operations. This is linked with the INPUT section [SEL] keys on the M7CL console panel. NOTE If the Channel Select / Sends On Fader checkbox in the System Setup dialog box is not checked, this will not be linked with the M7CL console. M CUE P Q This button cue-monitors the signal of the INPUT CH. This is linked with the INPUT section [CUE] keys on the M7CL’s panel. NOTE If the Channel Select / Sends On Fader checkbox in the System Setup dialog box is not checked, this will not be linked with the M7CL console. N ON Switches the INPUT CH or send on/off. In normal mode, this button is linked with the CH [ON] key in the INPUT section on the M7CL console panel. The button is color-coded and indicates status as follows: White: INPUT CH is on (normal mode) Black: INPUT CH/Send are off. Other colors: Send is on (SENDS ON FADER mode). O Fader Adjusts the input level of the INPUT CH, or the send level. In normal mode, this fader is linked with the fader in the INPUT section on of the M7CL console panel. The fader is color-coded and indicates status as follows: White: You can adjust the input level of the INPUT CH (normal mode). Gray: INPUT CH is off. Other colors: You can adjust the send level (SENDS ON FADER mode). The current fader value is shown in the numerical box located immediately below the fader. You can set this to the minimum value (–∞ dB) by holding down the <Ctrl>(< >) key of your computer keyboard and clicking the fader knob, or set it to the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the fader knob. 18 M7CL V3 Editor Owner’s Manual The numbers and alphabetical letters at the right of the fader indicate the DCA group and mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status of the channel. The numbers of DCA groups to which this channel belongs are shown in yellow. The numbers of mute groups to which this channel belongs are shown in red. If this channel is set to Recall Safe, the R character is shown in green. If this channel is set to Mute Safe, the M character is shown in green. P Channel number This is the number of the INPUT CH. You can open the Selected Channel window for this channel by double-clicking this number. If you hold down the <Ctrl>(< >) key of your computer keyboard and double-click this, the Selected Channel window will open as an additional view. Q Channel name This is a text box that displays the channel name. You can also edit the channel name in this text box. 19 M7CL V3 Editor Owner’s Manual ST IN window ( M7CL-32/M7CL-48 only) In this window you can view and edit the mix parameters of ST IN channels 1–4. The parameters shown in the window can be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in the window. You can access this window in the following ways. ● ● 1 2 3 4 5 6 From the [Windows] menu, choose [Overview] and then choose “ST IN” Use the navigation keys in the Master window to turn on the [ST IN] button A INPUT PATCH Selects the input source that will be assigned to the ST IN channel. The input sources that can be assigned are the same as for an INPUT CH (➥ p.16). B HA GAIN Drag the knob in the screen to adjust the gain of the internal head amp or of the external head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the ST IN channel. C 48V Switches on/off the phantom power (+48V) of the internal head amp or of the external head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the ST IN channel. D Ø (Phase) Inverts the phase of the signal after AD conversion. E HPF (High Pass Filter) Switches the high pass filter on/off. You can drag the numeric value up or down to edit the cutoff frequency. F EQ (Equalizer) Switches the EQ on/off (the L/R settings are linked). This is the same as the equalizer for INPUT CH (➥ p.17). 20 M7CL V3 Editor Owner’s Manual G DYN1/DYN2 (Dynamics 1//Dynamics 2) 7 These buttons switch the two dynamics processors on/off. This is the same as the dynamics 1/dynamics 2 for INPUT CH (➥ p.17). H MIX/MATRIX SEND 8 Switches between the send indications to MIX buses 1–16 or to MATRIX buses 1–8. This is the same as the mix/matrix send for INPUT CH (➥ p.17). I BALANCE The BALANCE knob adjusts the balance of the signal that is sent from the ST IN channel to the STEREO bus L/R channels (or the L/C/R channels). Other than the BALANCE knob, this is the same as PAN/TO STEREO MONO for an INPUT channel (➥ p.18). J SEL (Select) 9 J K L Selects the ST IN channel for which you want to perform operations. (L and R can be selected separately.) This is linked with the ST IN section [SEL] keys on the M7CL’s panel. NOTE If the Channel Select / Sends On Fader checkbox in the System Setup dialog box is not checked, this will not be linked with the M7CL console. K CUE M This button cue-monitors the signal of the ST IN channel (L/R are linked). This is linked with the ST IN section [CUE] keys on the M7CL’s panel. NOTE If the Channel Select / Sends On Fader checkbox in the System Setup dialog box is not checked, this will not be linked with the M7CL console. L ON N O Switches the ST IN channel on/off (the L/R settings are linked). This is linked with the ST IN section CH [ON] keys on the M7CL’s panel. The button is color-coded and indicates status as follows: White: ST IN channel is on (normal mode) Black: ST IN channel/Send are off. Other colors: Send is on (SENDS ON FADER mode). M Fader Adjusts the input level of the ST IN channel. When the M7CL itself is in other than SENDS ON FADER mode, this is linked with the INPUT section faders of the M7CL’s panel. The fader is color-coded and indicates status as follows: White: You can adjust the input level of the ST IN channel (normal mode). Gray: ST IN channel is off. Other colors: You can adjust the send level (SENDS ON FADER mode). The current fader value is shown in the numerical box located immediately below the fader. This is the same as the fader for INPUT CH (➥ p.18). N Channel number This is the number of the ST IN channel. You can double-click this number to open the Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key of your computer keyboard and double-click this, the Selected Channel window will open as an additional view. O Channel name This is a text box that displays the channel name. You can also edit the channel name in this text box. 21 M7CL V3 Editor Owner’s Manual MIX window In this window you can view and edit the parameters of MIX channels 1–16. The parameters shown in the window can be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in the window. You can access this window in the following ways. ● ● 1 2 3 4 From the [Windows] menu, choose [Overview] and then choose “MIX” Use the navigation keys in the Master window to turn on the [MIX] button A OUTPUT PATCH Click here to select the output port that will be assigned to the MIX channel, from the following choices. ES 1-ES24(M7CL-48ES) EtherSound output channels 1–24 OMNI1-OMNI8 OMNI OUT jacks 1–8 OMNI9-OMNI16(M7CL-32/48) OMNI OUT jacks 9–16 SLOT1-1, SLOT1-2...SLOT3-16 Input channels of an I/O card installed in slot 1–3 RACK1A, RACK1B...RACK8R(B) L/R outputs of Rack 1–8 2TROUT L, 2TROUT R L/R channels of the 2TR OUT DIGITAL jack If multiple patches have been made, only the first port is shown. If you change the patching in this window, the port that had been assigned until then will be cancelled, and only the newly selected port will be assigned. B EQ (Equalizer) Switches the EQ on/off. This is the same as the equalizer for INPUT CH ( ➥ p.17). C DYN1(Dynamics 1) Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT CH (➥ p.17). D INS (Insert) Enables/disables the insert-in. 22 M7CL V3 Editor Owner’s Manual E MATRIX SEND 5 6 7 8 9 J K These bar graphs indicate the send levels of the signals sent from the MIX • Pre/on (green)) channel to MATRIX 1–8 bus. You can also adjust the send levels by dragging a bar graph to left or right. While you drag the bar graph, the send • Pre/off (green) level is shown in the numerical display area for TO STEREO/MONO. You can set the minimum value (–∞ dB) by holding down the • Post/on (yellow) <Ctrl>(< >) key of your computer keyboard and clicking the bar • Post/off (yellow) graph, or set the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the bar graph. The bar graph display will change as follows according to the send position (pre/post) and on/off status of the signal sent from the MIX channel to the MATRIX buses. To switch a send on/off, click the channel number located at the left of the bar graph. F PAN/BALANCE The PAN knob adjusts the panning of the signal that is sent from the mix channel to the STEREO bus L/R channels (or the L/C/R channels). You can set this to the center value by holding down the <Ctrl>(< >) key of your computer keyboard and clicking this knob. If assigned as a stereo bus, this adjusts the balance of the odd-numbered channel and even-numbered channel. The stereo bus setting can be made in Mix Bus Setup of the Mixer Setup dialogbox. The [ST] button is an on/off switch for the signal that is sent from the mix channel to the STEREO bus. The [MONO] button is an on/off switch for the signal that is sent from the mix channel to the MONO bus. If LCR MODE is selected in the Selected Channel window, the [LCR] button will appear instead of the [ST] button and [MONO] button, and the [LCR] button will be an on/off switch for the signal that is sent from the mix channel to the LCR bus. G VARI/FIXED Indicates the type (VARI or FIXED) of the currently selected MIX bus. This parameter can be switched in Mix Bus Setup of the Mixer Setup dialogbox. H SEL (Select) Selects the MIX channel for which you want to make settings. L I CUE This button cue-monitors the signal of the MIX channel. J ON M Switches the MIX channel on/off. The button is color-coded and indicates status as follows: White: MIX channel is on (normal mode). Black: MIX channel/Send is off. Other colors: Send is on (SENDS ON FADER mode). K Fader Adjusts the output level of the MIX channel. The current fader value is The numbers of mute groups shown in the numeric box immediately to which this channel belongs below the fader. You can set this to the are shown in red. minimum value (–∞ dB) by holding down the <Ctrl>(< >) key of your computer keyboard and clicking the If this channel is set to Recall fader knob, or set it to the nominal value Safe, the R character is (0.00 dB) by holding down the shown in green. <Ctrl>(< >) key and <Shift> key and If this channel is set to Mute clicking the fader knob. Safe, the M character is shown in green. The numbers and alphabetical letters at the right of the fader indicate the mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status of the channel. The fader is color-coded and indicates status as follows: White: You can adjust the input level of the MIX channel (normal mode). Gray: MIX channel is off. Other colors: You can adjust the send level (SENDS ON FADER mode). 23 M7CL V3 Editor Owner’s Manual L Channel number Indicates the number of the MIX channel. You can double-click this number to open the Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key of your computer keyboard and double-click this, the Selected Channel window will open as an additional view. M Channel name This is a text box that displays the channel name. You can also edit the channel name in this text box. MATRIX window In this window you can view and edit the parameters of MATRIX channels 1–8. The parameters shown in the window can be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in the window. You can access this window in the following ways. ● ● From the [Windows] menu, choose [Overview] and then choose “MATRIX” Use the navigation keys in the Master window to turn on the [MTRX] button 24 M7CL V3 Editor Owner’s Manual 1 A MIX/CH/ST IN (Send levels from the MIX/INPUT CH/ST IN to the MATRIX bus) This switches between indicating the sends from MIX channels 1–16, the sends from INPUT CH 1–16 / 17–32 / 33–48 (*), and the sends from ST IN. 2 The bar graphs located immediately below the button indicate/adjust the level of the signal that is sent from each channel to the MATRIX bus. The method of operation and the meaning of the display are the same as for (5) MATRIX in the MIX window (➥ p.23). (*) 3 4 INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. B STEREO (Send levels from the STEREO channels to the MATRIX bus) Here you can view and edit the send levels of the signals sent from the STEREO channels to the MATRIX bus. While you drag the bar graph, the send level is shown in the numerical display area immediately below. The method of operation and the meaning of the display are the same as for (5) MATRIX in the MIX window (➥ p.23). C EQ (Equalizer) 5 Switches the EQ on/off. The graph immediately below the button shows the approximate response of the EQ. This is the same as the equalizer for INPUT CH (➥ p.17). 6 7 D DYN1(Dynamics 1) 8 E INS (Insert) Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT CH (➥ p.17). Enables/disables the insert-in. F SEL (Select) 9 Selects the MATRIX channel for which you want to make settings. G CUE This button cue-monitors the signal of the MATRIX channel. H ON This switches the MATRIX channel on/off. If the corresponding channel is off, the fader will be grayed out. I Fader J This adjusts the output level of the MATRIX channel. The current fader value is shown in the numeric box immediately below the fader. The numbers and alphabetical letters at the right of the fader indicate the mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status of the channel. (For the significance of the numbers and alphabetical letters, see ➥ p.18). J Channel number Indicates the number of the MATRIX channel. You can double-click this number to open the Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key of your computer keyboard and double-click this, the Selected Channel window will open as an additional view. 25 M7CL V3 Editor Owner’s Manual STEREO/MONO window In this window you can view and edit the parameters of the STEREO and MONO channels. The parameters shown in the window can be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in the window. You can access this window in the following ways. ● ● 1 2 3 4 From the [Windows] menu, choose [Overview] and then choose “STEREO/MONO” Use the navigation keys in the Master window to turn on the [STEREO] button A EQ (Equalizer) Switches the EQ on/off (the L/R settings are linked). This is the same as the equalizer for INPUT CH (➥ p.17). B DYN1(Dynamics 1) Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT CH (➥ p.17). C INS (Insert) Enables/disables the insert-in. (The L/R settings are linked.) D MATRIX SEND Here you can view and edit the send levels of the signals sent from the STEREO/MONO channel to MATRIX 1–8 bus. The method of operation and the meaning of the display are the same as for MATRIX in the MIX window (➥ p.23). 26 M7CL V3 Editor Owner’s Manual E BALANCE 5 6 7 8 Adjusts the left/right balance of the STEREO channel. For MONO channels, this control indicates the send level to the MATRIX bus. F SEL (Select) Selects the channel for which you want to make settings. (You can specify L and R independently.) This is linked with the STEREO/MONO MASTER section [SEL] keys on the M7CL’s panel. G CUE 9 This button cue-monitors the signal of the STEREO/MONO channel. This is linked with the STEREO/MONO MASTER section [CUE] keys on the M7CL’s panel. H ON J This switches the STEREO/MONO channel on/off. This is linked with the STEREO/ MONO MASTER section [ON] keys on the M7CL’s panel. The button is color-coded and indicates status as follows: White: STEREO/MONO channel is on (normal mode). Black: STEREO/MONO channel/Send is off. Other colors: Send is on (SENDS ON FADER mode). I Fader Adjusts the output level of the STEREO/MONO channel. This is linked with the STEREO/MONO MASTER section faders of the M7CL’s panel. The current fader value is shown in the numeric box immediately below the fader. The numbers and alphabetical letters at the right of the fader indicate the mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status of the channel. (For the significance of the numbers and alphabetical letters, see ➥ p.21). The fader is color-coded and indicates status as follows: White: You can adjust the input level of the STEREO/MONO channel (normal mode). Gray: STEREO/MONO channel is off. Other colors: You can adjust the send level (SENDS ON FADER mode). J Channel number This is the channel number (ST or M). You can double-click this number to open the Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key of your computer keyboard and double-click this, the Selected Channel window will open as an additional view. 27 M7CL V3 Editor Owner’s Manual DCA window In this window you can view and edit the parameters of DCA groups 1–8. You can access this window in the following ways. ● ● 1 2 From the [Windows] menu, choose [Overview] and then choose “DCA” Use the navigation keys in the Master window to turn on the [DCA] button A CUE This button cue-monitors all channels that are assigned to the DCA group. B ON If you turn this on, all channels assigned to the DCA group will be turned on. If you turn this off, no signal will be output from the channels assigned to the DCA group. If this button is off, the fader will be grayed out. 3 4 C DCA fader This fader adjusts the level of the DCA group. The current fader value is shown in the numeric box immediately below the fader. You can set this to the minimum value (–∞ dB) by holding down the <Ctrl>(< >) key of your computer keyboard and clicking the fader knob, or set it to the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the fader knob. If the fader is at nominal level, the green indicator at the right of the fader will light. If a DCA group is set to Recall Safe, the R character at the lower right of the fader is displayed in green. D DCA number 5 This is the number of the DCA group. E DCA group name This is a text box that displays the DCA group name. You can also edit the DCA group name in this text box. 28 M7CL V3 Editor Owner’s Manual Selected Channel window Here you can set the parameters of the currently selected input channel (INPUT CH 1–48 (*), ST IN channels 1–4) or output channel (MIX channels 1–16, MATRIX channels 1–8, STEREO/MONO channels). You can access this window in the following ways. ● ● ● From the [Windows] menu, choose [Selected Channel] and select “MAIN VIEW” Double-click the channel number, EQ, DYN1, or DYN2 button in one of the Overview windows. On the M7CL itself, assign one of the USER DEFINED KEYS to [1-16]/[17-32]/[33-48](*) in [SEL CH] of [M7CL EDITOR CONTROL], and execute the function NOTE By choosing [Selected Channel] from the [Windows] menu and then selecting “ADDITIONAL VIEW,” you can view a window for a channel that is not selected. This ADDITIONAL VIEW is not linked with [SEL] key operations on the panel of the M7CL. The type of parameters that can be edited in this window depends on the type of the currently selected channel. The parameters of the Selected Channel window are explained below, in the order of input channels (input channels 1– 48, ST IN channels 1–4), MIX channels, MATRIX channels, and STEREO/MONO channels. (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. If an input channel is selected ● INPUT CH window 29 M7CL V3 Editor Owner’s Manual ● ST IN channel window NOTE Unless otherwise specified, the parameters explained below are common to INPUT CH 1–48 and ST IN channels 1–4. ❏ CHANNEL SELECT (Channel selection) 1 2 3 A SELECT (Channel selection) Indicates the number and name of the channel you are editing. To switch channels, use the SELECT button or the triangle buttons at left and right. The channel selected in the Main View is linked with the [SEL] keys in the INPUT section of the M7CL’s panel. You can right-click (<control> key + click) the icon and select the desired choice. You can also edit the channel name in the text box. B LIBRARY Accesses the Input Channel Library. Click this button to open the INPUT CH page of the Library window. C INPUT PATCH Selects the input source assigned to the input channel (for the selectable input sources, ➥ p.16). 30 M7CL V3 Editor Owner’s Manual ❏ TO MIX/TO MATRIX SEND 2 1 4 3 A MIX/MATRIX send level This adjusts the send level of the signal sent from the input channel to VARI-type MIX bus and MATRIX bus. The current value is shown in the numerical box immediately below. B PRE (PRE/POST) This selects PRE or POST as the point from which the signal is sent from the input channel to the MIX bus and MATRIX bus. The point will be PRE POINT when this is on, and POST FADER when this is off. The PRE POINT setting can be specified in the Mixer Setup dialogbox. NOTE Right-click the PRE button to display a context-sensitive menu that will enable you to specify ALL PRE, ALL POST, or other options. C ON (MIX/MATRIX send on/off) This is an on/off switch for the signal sent from the input channel to the MIX bus and MATRIX bus. HINT • If MIX buses or MATRIX buses are being used in stereo, the odd-numbered knob will be PAN. Knob of odd-numbered side Knob of oddnumbered side • If the FIXED type is selected for the MIX bus, only the ON button is valid. • The stereo/mono setting and the VARI type / FIXED type setting can be made in the Mixer Setup dialogbox. D Channel name This section indicates the name of the MIX channel or MATRIX channel. ❏ HA GAIN/Ø/HPF 1 2 3 A HA (HA Gain) Adjusts the gain of the internal head amp or of the external head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the input channel. The current value is shown in the numerical box below the knob. You can set this to the default value (+10 dB) by holding down the <Ctrl>(< >) key and clicking the knob. You can also use the [48V] button to switch phantom power on/off. B Ø (Phase) Inverts the phase of the signal after AD conversion. 31 M7CL V3 Editor Owner’s Manual C HPF (High Pass Filter) Use the [ON] button at the right to switch the high-pass filter on/off. You can use the knob at left to adjust the cutoff frequency. The current value is shown in the numerical box below the knob. An indication of “H” will appear on the EQ graph of the equalizer. ❏ TO STEREO/MONO Here you can specify how the signal will be sent from the input channel to the STEREO bus / MONO bus. MODE • ST/MONO button When this button is on, the signal will be sent to the STEREO L/R bus and independently to the MONO bus. [INPUT CH 1–48] [ST IN channel 1–4] Adjusts the panning of the signal sent from the input channel to the STEREO bus L/R channels. You can set this to the center position by holding down the <Ctrl>(< >) key of the PAN (BALANCE for ST IN) computer keyboard and clicking the knob. This is linked with the [PAN] encoder in the SELECTED CHANNEL section of the M7CL panel. ST Switches the signal sent from the input channel to the STEREO bus on/off. M(C) Switches the signal sent from the input channel to the MONO bus on/off. • LCR button When this button is on, the signal will be sent to the L/C/R buses which work in conjunction with each other. [INPUT CH 1–48] [ST IN channel 1–4] Adjusts the panning of the signal that is sent from the input channel to each of the L/C/R channels. You can set this to the center position by holding down the <Ctrl>(< >) key of PAN (BALANCE for ST IN) the computer keyboard and clicking the knob. This is linked with the [PAN] encoder in the SELECTED CHANNEL section of the M7CL panel. CSR (Center Side Ratio) Adjusts the proportion of the CENTER channel level relative to the STEREO bus L/R in a range of 0–100%. 32 M7CL V3 Editor Owner’s Manual ❏ EQUALIZER 1 2 3 5 6 4 7 8 9 K J A LIBRARY Accesses the INPUT EQ page of the LIBRARY window. B ON Switches the EQ on/off. C EQ graph Indicates the response for the EQ of the currently selected channel. To reset the EQ to flat response, hold down the <Ctrl>(< >) key of your computer keyboard and click the graph (The HPF setting will remain). DQ E FREQUENCY F GAIN These knobs adjust the Q, center frequency, and boost/cut amount for the four bands LOW, LO-MID, HI-MID, and HIGH. G HIGH shelving If this button is on, the HIGH EQ will be switched to a shelving type (the Q knob of the HIGH EQ will disappear). H LPF (Low Pass Filter) If this button is on, the HIGH EQ will function as a low pass filter. The Q knob of the HIGH EQ will disappear, and the GAIN knob will act as the low pass filter on/off switch. I LOW shelving If this button is on, the LOW EQ will be switched to a shelving type (the Q knob of the LOW EQ will disappear). J TYPE I/TYPE II (EQ type) Selects either TYPE I (the algorithm used by previous digital mixers) or TYPE II (a newly developed algorithm) as the EQ type. 33 M7CL V3 Editor Owner’s Manual K ATT (Attenuation) Adjusts the amount of attenuation/gain. ❏ DYNAMICS1/2 You can select one of the following types for each of the two dynamics processors. DYNAMICS1: GATE, DUCKING, EXPANDER, COMPRESSOR DYNAMICS2: COMPRESSOR, COMPANDER-H, COMPANDER-S, DE-ESSER If GATE/DUCKING is selected 5 1 2 3 6 7 8 4 9 J K L M A TYPE Indicates the type of the currently selected gate. You can click here to select the type. B LIBRARY This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY window. C ON This button switches the gate on/off. D Response curve Indicates the response for the gate of the currently selected channel. E GR meter This meter indicates the amount of gain reduction. F THRESHOLD (Threshold level) Specifies the level at which the gate will open and close. The gate will open when the key-in signal exceeds this level, and will close when the signal falls below this level. G RANGE Specifies the amount by which the signal is attenuated while the gate is closed. H DECAY Specifies the time over which the gate will close after the hold time has elapsed. I ATTACK Specifies the time from when the key-in signal exceeds the threshold level until the gate opens. 34 M7CL V3 Editor Owner’s Manual J HOLD Specifies the time that the gate will remain open after the key-in signal falls below the threshold. K KEY IN SOURCE Click this to select one of the following signals to use as the key-in source. SELF PRE EQ SELF POST EQ MIX OUT 13–16 CH 1–48 POST EQ STIN1L–STIN4R POST EQ The pre-EQ signal of the currently selected input channel The post-EQ signal of the currently selected input channel The output signal of the corresponding MIX channel immediately before the output attenuation The post-EQ signal of the corresponding input channel (however, you can only choose channels belonging to the same group, within the seven groups CH1–8, CH9–16, CH17–24, CH25–32, CH33–40, CH41–48, and STIN1L–STIN4R). L CUE This button cue-monitors the currently selected key-in signal. This is not shown in the ADDITIONAL VIEW. M KEY IN FILTER Select the type of filter applied to the selected key-in signal; HPF (high pass filter), BPF (band pass filter), or LPF (low pass filter). The ON/OFF button switches the filter on/off. If you’ve selected BPF, use the two knobs to adjust the band pass frequency and Q. If you’ve selected HPF or LPF, use the knob to adjust the cutoff frequency. If COMPRESSOR is selected 5 1 2 3 6 7 8 4 9 J K L A TYPE Indicates the type of the currently selected compressor. You can click here to select the type. B LIBRARY This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY window. C ON This button switches the compressor on/off. D Response curve Indicates the response for the compressor of the currently selected channel. E GR meter This meter indicates the amount of gain reduction produced by the compressor. F THRESHOLD Specifies the threshold level at which the compressor will operate. The input signal will start being compressed when the key-in signal exceeds this level; compression will be removed when the signal falls below this level. 35 M7CL V3 Editor Owner’s Manual G RATIO Specifies the ratio at which the input signal will be compressed when the key-in signal exceeds the threshold. H KNEE Specifies the sharpness at which the output level will change. You can select from HARD or 1–5. I ATTACK Specifies the time from when the key-in signal exceeds the threshold level until the signal starts being compressed. J GAIN Adjusts the gain of the signal after it has passed through the compressor. K RELEASE Specifies the time from when the key-in signal falls below the threshold level until compression is removed. L KEY IN SOURCE Click this to select the key-in signal that you want to use. The choices are the same as for GATE. If COMPANDER-H, COMPANDER-S is selected 5 1 2 3 6 7 8 4 9 J K L A TYPE Indicates the type of the currently selected compressor. You can click here to select the type. B LIBRARY This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY window. C ON This button switches the compressor on/off. D Response curve Indicates the response for the compander of the currently selected channel. E GR meter This meter indicates the amount of gain reduction produced by the compressor. F THRESHOLD Specifies the threshold level at which the compressor will operate. The input signal will start being compressed when the key-in signal exceeds this level; compression will be removed when the signal falls below this level. G RATIO Specifies the ratio at which the input signal will be compressed when the key-in signal exceeds the threshold. 36 M7CL V3 Editor Owner’s Manual H WIDTH Specifies the width between the threshold level of the compressor (THRESHOLD) and the threshold level of the expander. The expander effect will apply to levels below THRESHOLD + WIDTH. I ATTACK Specifies the time from when the key-in signal exceeds the threshold level until the signal starts being compressed. J GAIN Adjusts the gain of the signal after it has passed through the compressor. K RELEASE Specifies the time from when the key-in signal falls below the threshold level until compression is removed. L KEY IN SOURCE Click this to select the key-in signal that you want to use. The choices are the same as for GATE. If DE-ESSER is selected 5 1 2 3 6 7 4 8 A TYPE This indicates that De-Esser is the currently selected type. B LIBRARY This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY window. C ON This button switches the de-esser on/off. D Response curve Indicates the response for the de-esser of the currently selected channel. E GR meter This meter indicates the amount of gain reduction produced by the de-esser. F THRESHOLD Specifies the threshold level at which the de-esser will operate. The input signal will start being compressed when the key-in signal exceeds this level; compression will be removed when the signal falls below this level. G FREQ. (Minimum frequency) Specifies the minimum frequency at which the key-in signal will activate the de-esser. H KEY IN SOURCE Click this to select the key-in signal that you want to use. The choices are the same as for GATE. 37 M7CL V3 Editor Owner’s Manual ❏ INSERT (except for ST IN channels) 1 2 3 5 6 4 A ON Enables/disables insert-in/out. B OUT (Insert out) Click this to select the output port that will be assigned to insert-out, from the following choices. NONE OMNI 1-OMNI 8(M7CL-48ES) SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 RACK1A, RACK1B...RACK8R(B) No assignment OMNI OUT jacks 1–8 Output channels of an I/O card installed in slots 1–3 L/R outputs of Rack 1–8 C IN (Insert in) Click this to select the input port that will be assigned to insert-in, from the following choices. NONE OMNI 1-OMNI 8(M7CL-48ES) SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 RACK1A, RACK1B...RACK8R(B) No assignment OMNI IN jacks 1–8 Input channels of an I/O card installed in slots 1–3 L/R inputs of Rack 1–8 D POINT (Insert point) Selects the position at which insert-in/out will be patched. Choose from PRE EQ, PRE FADER, or POST ON. E HA gain (M7CL-48ES) Adjusts the HA gain for OMNI IN. This knob appears only if you select OMNI as INSERT IN ( 3). F 48V (M7CL-48ES) Switches phantom power (+48V) on/off. This button appears only if you select OMNI as INSERT IN ( 3). ❏ DIRECT OUT (except for ST IN channels) 1 2 3 4 A ON Turns the direct output on/off. B DIRECT OUT GAIN Adjusts the gain of the direct output. The current value is shown in the numerical box below the knob. You can set this to the nominal value (0.0 dB) by holding down the <Ctrl>(< >) key and clicking the knob. 38 M7CL V3 Editor Owner’s Manual C DIRECT OUT PORT Click this to select one of the following output ports as the one used for direct out. NONE OMNI 1-8 OMNI 9-16(M7CL-32/48) SLOT1-1, SLOT1-2...SLOT3-16 No assignment OMNI OUT jacks 1–8 OMNI OUT jacks 9–16 Output channels of an I/O card installed in slots 1–3 D DIRECT OUT POINT Selects the position at which direct out will be patched. Choose from PRE HPF, PRE EQ, PRE FADER, or POST ON. ❏ RECALL SAFE/MUTE SAFE These enable/disable Recall Safe and Mute Safe for the channel. ❏ DCA GROUP/MUTE GROUP 1 2 A DCA GROUP Selects the DCA group (1–8) to which that channel belongs. BMUTE GROUP Selects the mute group (1–8) to which that channel belongs. ❏ Fader 1 A ON 2 B Fader Switches the input channel on/off. This is linked with the INPUT section CH [ON] keys on the M7CL’s panel. If the corresponding channel is off, the fader will be grayed out. Adjusts the input level of the input channel. This is linked with the INPUT section faders of the M7CL’s panel. A meter indicating the signal level is shown at the right of the fader, and the current value is shown in the numerical box immediately below. You can set this to the minimum value (–∞ dB) by holding down the <Ctrl>(< >) key of your computer keyboard and clicking the fader knob, or set it to the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the fader knob. C CUE 3 This button cue-monitors the signal of the input channel. This is linked with the INPUT section [CUE] keys on the M7CL’s panel. 39 M7CL V3 Editor Owner’s Manual If a MIX channel is selected ❏ CHANNEL SELECT (Channel selection) A SELECT (Channel selection) 2 1 Except for the fact that your editing applies to a MIX channel, this is the same as the channel selection for an input channel (➥ p.30). 3 B LIBRARY Accesses the Output Channel Library. Click this button to open the OUTPUT CH page of the Library window. C INPUT PATCH Selects the input source assigned to the input channel (for the selectable input sources, ➥ p.22) If multiple patches have been made, only the first port is shown. If you change the patching in this window, the port that had been assigned until then will be cancelled, and only the newly selected port will be assigned. ❏ TO MATRIX A MATRIX send level 1 This adjusts the send level of the signal sent from the MIX channel to the MATRIX buses. 2 B PRE (PRE/POST) 3 Select either PRE or POST as the position from which the signal is sent from the MIX 4 channel to the MATRIX bus. PRE POINT is selected if this is on, or POST FADER is selected if this is off. The PRE POINT setting can be made in the Mixer Setup dialogbox. NOTE Right-click the PRE button to display a context-sensitive menu that will enable you to specify ALL PRE, ALL POST, or other options. HINT • If you are using MATRIX buses in stereo, the knob for the odd-numbered bus will be PAN. Knob of oddnumbered side • The stereo/mono status can be specified in the Mixer Setup dialogbox. 40 M7CL V3 Editor Owner’s Manual C ON (MATRIX send on/off) This is an on/off switch for the signal sent from the MIX channel to the MATRIX bus. D Channel name This section indicates the MATRIX channel name. ❏ TO STEREO/MONO Here you can specify how the signal will be sent from the MIX channel to the STEREO bus / MONO bus. MODE • ST/MONO button When this button is on, the signal will be sent to the STEREO bus and independently to the MONO bus. PAN Adjusts the panning of the signal sent from the MIX channel to the STEREO bus L/R channels. You can set this to the center position by holding down the <Ctrl>(< >) key of the computer keyboard and clicking the knob. This is linked with the [PAN] encoder in the SELECTED CHANNEL section of the M7CL panel. If the selected MIX bus is used as a stereo bus, the odd-numbered channel is fixed at L63 and the even-numbered channel fixed at R63. ST Switches the signal sent from the MIX channel to the STEREO bus on/off. MONO Switches the signal sent from the MIX channel to the MONO bus on/off. BALANCE This is shown only if the selected MIX bus is assigned as a stereo bus. It adjusts the left/ right volume balance of the stereo bus. You can set this to the center position by holding down the <Ctrl>(< >) key of the computer keyboard and clicking the knob. • LCR button When this button is on, the signal will be sent to the L/C/R buses which work in conjunction with each other. PAN Adjusts the panning of the signal that is sent from the MIX channel to each of the L/C/R channels. You can set this to the center position by holding down the <Ctrl>(< >) key of the computer keyboard and clicking the knob. This is linked with the [PAN] encoder in the SELECTED CHANNEL section of the M7CL panel. If the selected MIX bus is used as a stereo bus, the odd-numbered channel is fixed at L63 and the even-numbered channel fixed at R63. BALANCE This is shown only if the selected MIX bus is assigned as a stereo bus. It adjusts the left/ right volume balance of the stereo bus. You can set this to the center position by holding down the <Ctrl>(< >) key of the computer keyboard and clicking the knob. CSR (Center Side Ratio) Adjusts the proportion of the CENTER channel level relative to the STEREO bus L/R in a range of 0–100%. 41 M7CL V3 Editor Owner’s Manual ❏ EQUALIZER 1 2 3 4 5 6 7 8 9 J K L A LIBRARY Accesses the OUTPUT EQ page of the LIBRARY window. B ON Switches the EQ on/off. C EQ graph Indicates the response for the EQ of the currently selected channel. To reset the EQ to flat response, hold down the <Ctrl>(< >) key of your computer keyboard and click the graph. DQ E FREQUENCY F GAIN These knobs adjust the Q, center frequency, and boost/cut amount for the four bands LOW, LO-MID, HI-MID, and HIGH. G HIGH shelving If this button is on, the HIGH EQ will be switched to a shelving type (the Q knob of the HIGH EQ will disappear). H LPF (Low Pass Filter) If this button is on, the HIGH EQ will function as a low pass filter. The Q knob of the HIGH EQ will disappear, and the GAIN knob will act as the low pass filter on/off switch. I (LOW shelving) If this button is on, the LOW EQ will be switched to a shelving type (the Q knob of the LOW EQ will disappear). J HPF (High Pass Filter) If this button is on, the LOW EQ will function as a high pass filter EQ. The Q knob of the LOW EQ will disappear, and the GAIN knob will act as the high pass filter on/off switch. K TYPE I/TYPE II (EQ type) Selects either TYPE I (the algorithm used by previous digital mixers) or TYPE II (a newly developed algorithm) as the EQ type. L ATT (Attenuation) Adjusts the amount of attenuation/gain. 42 M7CL V3 Editor Owner’s Manual ❏ DYNAMICS1 Except for the fact that the available types are COMPRESSOR, EXPANDER, COMPAND H and COMPAND S, and that you can select more than one signal as the key-in signal, this is the same as the dynamics for input channels (➥ p.34). ❏ INSERT Except for the fact that the insert points that can be selected are different, this is the same as for the insert settings of an input channel (➥ p.38). ❏ RECALL SAFE/MUTE SAFE These are the same as the Recall Safe and Mute Safe functions for input channels. ❏ MUTE GROUP Selects the mute group (1–8) to which the MIX channel belongs. ❏ Pan/Fader A ON 1 Switches the MIX channel on/off. B Fader 2 Adjusts the output level of the MIX channel. A meter indicating the signal level is shown at the right of the fader, and the current value is shown in the numerical box immediately below. You can set this to the minimum value (–∞ dB) by holding down the <Ctrl>(< >) key of your computer keyboard and clicking the fader knob, or set it to the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the fader knob. C CUE This button cue-monitors the signal of the MIX channel. 3 43 M7CL V3 Editor Owner’s Manual If a MATRIX channel is selected ❏ CHANNEL SELECT (Channel selection) Except for the fact that your editing applies to a MATRIX channel, this is the same as the channel selection for a MIX channel (➥ p.40). ❏ FROM MIX, ST/MONO 2 3 1 4 A FROM MIX, ST/MONO send level These adjust the send levels of the signals sent from the VARI type MIX buses or STEREO/MONO buses to the MATRIX bus. The current value is shown in the numerical box immediately below. B PRE(PRE/POST) These select either PRE or POST as the position from which the signal is sent from the MIX buses or STEREO/ MONO buses to the MATRIX bus. PRE POINT is selected if this is on, or POST FADER is selected if this is off. 44 M7CL V3 Editor Owner’s Manual C ON(FROM MIX, ST/MONO send on/off) These are on/off switches for the signal sent from the MIX buses or STEREO/MONO buses to the MATRIX bus. HINT • If MIX buses and MATRIX buses are being used in stereo, the odd-numbered knob will be PAN. PAN (odd-numbered side) • If the FIXED type is selected for the MIX bus, only the ON button is valid. • The stereo/mono setting and the VARI type / FIXED type setting can be made in the Mixer Setup dialogbox. D Channel name This section indicates the name of the MIX channel or STEREO/MONO channel. ❏ BALANCE This is shown only if the selected MATRIX bus is being used as stereo. It adjusts the left/right volume balance of the stereo signal. You can set this to the center value by holding down the <Ctrl>(< >) key of your computer keyboard and clicking this knob. ❏ EQUALIZER This is the same as for the equalizer of a MIX channel (➥ p.42). ❏ DYNAMICS1 Except for the fact that the available types are COMPRESSOR, EXPANDER, COMPAND H and COMPAND S, and that you can select more than one signal as the key-in signal, this is the same as the dynamics for input channels (➥ p.34). ❏ INSERT Except for the fact that the insert points that can be selected are different, this is the same as for the insert settings of an input channel (➥ p.38). ❏ RECALL SAFE/MUTE SAFE These are the same as the RECALL SAFE/MUTE SAFE of a MIX channel (➥ p.43). ❏ MUTE GROUP These are the same as the MUTE GROUP of a MIX channel (➥ p.43). 45 M7CL V3 Editor Owner’s Manual ❏ Fader 1 A ON This switches the MATRIX channel on/off. B Fader 2 This adjusts the output level of the MATRIX channel. A meter indicating the signal level is shown at the right of the fader, and the current value is shown in the numerical box immediately below. You can set this to the minimum value (–∞ dB) by holding down the <Ctrl>(< >) key of your computer keyboard and clicking the fader knob, or set it to the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the fader knob. C CUE This button cue-monitors the signal of the MATRIX channel. 3 46 M7CL V3 Editor Owner’s Manual If a STEREO/MONO channel is selected ● STEREO channel window ● MONO channel window ❏ CHANNEL SELECT (Channel selection) Except for the fact that your editing applies to a STEREO/MONO channel, this is the same as the channel selection for a MIX channel (➥ p.40). ❏ TO MATRIX These are the same as the TO MATRIX of a MIX channel (➥ p.40). 47 M7CL V3 Editor Owner’s Manual ❏ BALANCE (except for MONO channel) This adjusts the left/right volume balance in the STEREO bus. You can set this to the center value by holding down the <Ctrl>(< >) key of your computer keyboard and clicking this knob. ❏ EQUALIZER This is the same as the equalizer settings of a MIX channel (➥ p.42). ❏ DYNAMICS1 Except for the fact that the available types are COMPRESSOR, EXPANDER, COMPAND H and COMPAND S, and that you can select more than one signal as the key-in signal, this is the same as the dynamics for input channels (➥ p.34). ❏ INSERT Except for the fact that the insert points that can be selected are different, this is the same as for the insert settings of an input channel (➥ p.38). ❏ RECALL SAFE/MUTE SAFE These are the same as the RECALL SAFE/MUTE SAFE of a MIX channel (➥ p.43). ❏ MUTE GROUP These are the same as the MUTE GROUP of a MIX channel (➥ p.43). ❏ Fader STEREO 1 2 MONO 1 2 A ON This switches the STEREO/MONO channel on/off. This is linked with the STEREO/MONO MASTER section [ON] keys on the M7CL’s panel. B Fader Adjusts the output level of the STEREO/MONO channel. This is linked with the STEREO/MONO MASTER section faders of the M7CL’s panel. A meter indicating the signal level is shown at the right of the fader, and the current value is shown in the numerical box immediately below. C CUE 3 3 This button cue-monitors the signal of the STEREO/MONO channel. This is linked with the STEREO/MONO MASTER section [CUE] keys on the M7CL’s panel. 48 M7CL V3 Editor Owner’s Manual Library window Here you can edit the M7CL’s various libraries. You can also load library files that were saved on a drive of your computer, edit the order or title of library items, recall the desired library data, or copy desired library data to a library within the M7CL. This window is divided into DYNAMICS, INPUT EQ, OUTPUT EQ, EFFECT, GEQ, INPUT CH, and OUTPUT CH pages; to switch pages, click the tabs located at the top of the window. To display this window, choose [LIBRARY] from the [Windows] menu, and select either “DYNAMICS,” “INPUT EQ,” “OUTPUT EQ,” “EFFECT,” “GEQ,” “INPUT CH,” or “OUTPUT CH.” 1 2 3 4 5 A OPEN (Open a file) Opens a library file located on a drive of your computer. Use this when you want to edit library data that you’ve saved on a USB storage device. B CLOSE (Close a file) Closes the currently-open library file. C SAVE Saves the currently-open library file on a drive of your computer. Use this to re-save an edited library on a USB storage device, or to create a backup on the hard disk of your computer. D SAVE AS (Save under a different name) Saves the currently-open library file under a different name on a drive of your computer. E File name Indicates the file name of the currently-open library. 49 M7CL V3 Editor Owner’s Manual 7 8 J L (Effect/GEQ page only) K (DYNAMICS page only) 9 M 6 N O P Q F FILE This list shows the contents of the data in the library file you opened using the OPEN button ( 1). The list includes the following items. G No. (Number) This column indicates the number of each item in the library. H TITLE This column indicates the title assigned to each library item. You can also double-click this area and edit the title. I READ ONLY Read-only data is indicated by an “R” in this column. It cannot be overwritten, nor can its title be edited. J TYPE This column indicates the effect type. In the case of dynamics, there is also an indication of the dynamics processor(s) of this channel into which each library item can be recalled. Only library items with an indication of “1” can be recalled to DYNAMICS 1, and only library items with an indication of “2” can be recalled to DYNAMICS 2. Library items with neither of these indications cannot be recalled to this channel. K DYNAMICS (DYNAMICS page only) Select which of the two dynamics processors will be subject to the Store or Recall operation. L RACK No. (Rack selection) (Effect/GEQ page only) Select which rack will be subject to the Store or Recall operation. NOTE HQ Pitch and Freeze cannot be recalled to an effect module mounted in Rack 6 or Rack 8. M INTERNAL DATA This area shows the M7CL’s scene memory contents. The items displayed are the same as in the FILE list ( 6). As desired, you can copy single or multiple scenes between the FILE list and the INTERNAL DATA list, and copy or move them to a different location within a list. 50 M7CL V3 Editor Owner’s Manual To do this, use the following methods to select the scene(s) that you want to copy or move. • To select a single scene Click the line containing the desired scene. • To select multiple consecutive scenes Click the first scene to select it; then hold down the <Shift> key and click the last scene. • To select multiple non-consecutive scenes Click the first scene; then hold down the <Ctrl>(< >) key and click each of the remaining scenes. When you have selected the scene(s) that you want to move or copy, drag them to the desired location in the other list (if you’re copying between lists) or in the same list (if you’re copying/moving within the same list). • To copy scenes (overwriting the destination) Drag the copy-source scene(s) to the desired line in the other list or to another line in the same list. At this time, a ® symbol will appear at the right of the scene number. When you drop the scene in this state, a dialog box will appear, asking you to confirm the Save operation. If you click the OK button, the copy-source scene(s) will be overwritten onto the copy-destination scenes, and the copy-source scene(s) will remain unchanged. (If the copy-source selection contains multiple scenes, the data will be overwritten onto consecutive scenes starting at that scene.) • To move scenes Within the same list, you can move the selected scene(s) to another location to rearrange the order of the scenes in the list. To do this, drag the selected scene(s) to a location between two other lines in the same list. At this time, a symbol will appear between the lines. When you release the mouse button in this state, the selected scene(s) will move to that location, and the scene numbers will also change accordingly. (If the move-source selection contains multiple scenes, those scenes will be inserted consecutively at the location you specify.) NOTE You cannot copy the InitialData of the GEQ library. N STORE Stores the current settings to the data item that is selected in the list. O RECALL Recalls the data item that is selected in the list. P CLEAR Clears the data item(s) selected in the list. (The title of the cleared item(s) will be reset to [No Data!].) Q UNDO Cancels the last-performed library recall, store, copy, or move operation. You can click this repeatedly to repeat Undo and Redo. 51 M7CL V3 Editor Owner’s Manual Patch Editor window Here you can assign the input/output port for each channel, its direct output, and its insert-in/out. This window is divided into INPUT PATCH, OUTPUT PATCH, INPUT INSERT PATCH, OUTPUT INSERT PATCH, DIRECT OUT PATCH, and PATCH LIST pages. To switch pages, click the tabs shown in the upper part of the window. To display this window, choose [PATCH Editor] from the [Windows] menu, and select either “INPUT PATCH,” “OUTPUT PATCH,” “INPUT INSERT PATCH,” “OUTPUT INSERT PATCH,” “DIRECT OUT PATCH,” or “PATCH LIST.” INPUT PATCH page Here you can select the input port that is assigned to the input of each input channel. ❏ PRESET Initializes the patching in this page. ❏ CLEAR ALL Clears all patching in this page. 52 M7CL V3 Editor Owner’s Manual OUTPUT PATCH page Here you can select the input port that is assigned to the output of each output channel. INPUT INSERT PATCH page Output port selection Input port selection Here you can assign input/output ports to the insert-in/out of each input channel. Select the output port in the left side of the screen, and the input port in the right side of the screen. 53 M7CL V3 Editor Owner’s Manual OUTPUT INSERT PATCH page Output port selection Input port selection Here you can assign input/output ports to the insert-in/out of each output channel. Select the output port in the left side of the screen, and the input port in the right side of the screen. DIRECT OUTPUT PATCH page Here you can select the output port that will directly output each input channel. 54 M7CL V3 Editor Owner’s Manual PATCH LIST page Here you can view and edit the input patch and output patch settings. 1 2 3 4 5 6 A Input channel number B Input channel name This is the number and name of the input channel. You can click the channel name box to edit the name in this page. C Input port This shows the input port assigned to the input channel. You can click this box and choose the input port from the popup menu that appears. D Output channel number E Output channel name This is the number and name of the output channel. You can click the channel name box to edit the name in this page. F Output port This shows the output port assigned to the output channel. You can click this box, then choose or cancel the output port from the popup menu that appears. NOTE You can assign multiple output ports. 55 M7CL V3 Editor Owner’s Manual Rack window Here you can make settings for GEQ, effects, and external head amps. This window is divided into GEQ/EFFECT and EXTERNAL HA page (M7CL-32/48) or EXT-ES HA page (M7CL48ES). To switch pages, click the tabs located at the top of the window. GEQ/EFFECT page 1 2 3 4 5 6 56 M7CL V3 Editor Owner’s Manual A Mount Select a GEQ module or effect module for mounting in the rack, from the following choices. BLANK No assignment 31BandGEQ 31-band 1-in/1-out graphic equalizer Flex15GEQ 2-in/2-out graphic equalizer that allows any fifteen of the 31 bands to be controlled EFFECT Internal effect (only for RACK 5–8) B Input patch Select the input port(s) that will be assigned to the rack, from the following choices. NONE No assignment MIX 1–16 MIX channel 1–16 MATRIX1-– 8 MATRIX channel 1–8 ST L, ST R, MONO(C) STEREO channel L/R, MONO channel INS CH 1–48(*) INPUT CH 1–48(*) insert in INS MIX 1–16 MIX channel 1–16 insert in INS MATRIX1–8 MATRIX channel 1–8 insert in INS ST L, INS ST R, INS MONO(C) Insert-in of STEREO channel L/R or the MONO channel (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. This is not shown if nothing is mounted in the rack. C Module graphic This area shows a graphic of the GEQ module or effect module that is currently assigned to the rack, and the parameters of that module. You cannot edit the parameters in this screen. Double-click this to open the module editor for that rack unit. By holding down the <Ctrl>(< >) key of your computer keyboard and double-clicking this, you can open multiple rack module editors. For these additional editors, the rack select buttons are not linked with the RACK popup window of the M7CL itself. D Input meter/Output meter These indicate the level of the signals being input and output from the rack. E Output patch Select the output port(s) that will be assigned to the rack, from the following choices. NONE No assignment CH 1–48(*) INPUT CH 1–48(*) STIN1L-STIN4R ST IN channel 1–4 (L/R) INS CH 1–48(*) INPUT CH 1–48(*) insert out INS MIX 1–16 MIX channel 1–16 insert out INS MTRX1–INS MTRX8 MATRIX channel 1–8 insert out INS ST L, INS ST R, INS MONO(C) Insert-out of STEREO channel L/R or the MONO channel (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. F ON, BYPASS This switches the GEQ module or effect module between active and bypassed states. A GEQ module is active when the ON button is lit. An effect module is active when the BYPASS button is dark. 57 M7CL V3 Editor Owner’s Manual Rack module editor — GEQ window ● 31BandGEQ ● Flex15GEQ In this window you can select the insertion destination of GEQ, and edit the parameters. A Rack No. (Rack selection) 1 Select the rack module that you want to control. B LIBRARY 2 This button accesses the GEQ library. Clicking this button will open the GEQ page of the LIBRARY window. 58 M7CL V3 Editor Owner’s Manual 3 4 C Input patch Click the CHANNEL field, and choose one of the following as the signal route that will be patched to the input channel(s) of the currently selected GEQ module. NONE No assignment MIX 1–16 MIX channel 1–16 MATRIX1-– 8 MATRIX channel 1–8 ST L, ST R, MONO(C) STEREO channel L/R, MONO channel INS CH 1–48(*) INPUT CH 1–48(*) insert in INS MIX 1–16 MIX channel 1–16 insert in INS MATRIX1–8 MATRIX channel 1–8 insert in INS ST L, INS ST R, INS MONO(C) Insert-in of STEREO channel L/R or the MONO channel (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL48ES. The channel name is shown in the boxes immediately below. D Input meter This indicates the level of the signal that is being input to the currently selected GEQ module. 5 6 E Output patch Click the CHANNEL field, and choose one of the following as the signal route that will be patched to the output channel(s) of the currently selected GEQ module. NONE No assignment CH 1–48(*) INPUT CH 1–48(*) STIN1L-STIN4R ST IN channel 1–4 (L/R) INS CH 1–48(*) INPUT CH 1–48(*) insert out INS MIX 1–16 MIX channel 1–16 insert out MATRIX INSERT1–8 MATRIX channel 1–8 insert out INS ST L, INS ST R, INS MONO(C) Insert-out of STEREO channel L/R or the MONO channel (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL48ES. The channel name is shown in the boxes immediately below. F Output meter This indicates the level of the signal that is being output to the currently selected GEQ module. 59 M7CL V3 Editor Owner’s Manual ● 31BandGEQ 8 9 7 J K ● Flex15GEQ 8 L 7 J K G ON (GEQ on/off) Switches the currently selected GEQ module on/off. H LINK This button links the settings of two adjacent odd-numbered/even-numbered 31BandGEQ modules, or the group A and group B settings of a Flex15GEQ. When you click this button, a window will ask you for confirmation. Click the buttons for the modules you want to use as the parameter copy-source and copy-destination. If you click the RESET BOTH button, the parameters of both modules will be reset to the default state. I GEQ graph This graph shows the response of the currently selected GEQ module. J GEQ faders These faders cut/boost the frequency bands of the GEQ module. The value of each fader is shown in the numerical box below it. Hold down the <Ctrl>(< >) key and click to set the value to 0.00 dB. K EQ FLAT This button resets all GEQ faders to the 0 dB position. L AVAILABLE BANDS (number of operable bands) (Flex15GEQ only) For a Flex15GEQ, you can operate any fifteen of the thirty-one bands. This numerical display box shows the remaining number of bands that can be operated. If you have operated fifteen bands, this number will be zero, and you won’t be able to operate any additional bands. If you want to operate another band in this state, you’ll need to return a previously-operated band back to the 0 dB position. 60 M7CL V3 Editor Owner’s Manual Rack module editor — Effect window Here you can select the effect type for an internal effect, edit the parameters, and specify the input/output patching. 61 M7CL V3 Editor Owner’s Manual 1 2 A Rack No. (Rack selection) 3 Select the rack module that you want to control. B BYPASS This button temporarily bypasses the effect. C CUE This button cue-monitors the output of the currently selected effect. 6 4 5 D EFFECT NAME Indicates the title of the currently selected effect. E EFFECT TYPE Indicates the currently selected effect type. You can also switch the effect type from this window. To do so, click the text box, and select the desired effect type from the popup menu that appears. F LIBRARY This button accesses the effect library. Clicking this button will open the EFFECT page of the LIBRARY window. G Input patch Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to the L/R input channels of the internal effect. 8 7 NONE No assignment MIX 1–16 MIX channel 1–16 MATRIX1–8 MATRIX channel 1–8 ST L, ST R, MONO(C) STEREO channel L/R, MONO channel INS CH J 9 INPUT CH 1–48(*) insert in INS MIX 1–16 MIX channel 1–16 insert in INS MATRIX1–8 MATRIX channel 1–8 insert in INS ST L, INS ST R, INS MONO(C) Insert-in of STEREO channel L/R or the MONO channel (*) K 1–48(*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. The channel name is shown in the boxes immediately below. H Input meter Indicates the level of the signal being input to the internal effect. I Output patch Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to the L/R output channels of the internal effect. NONE No assignment CH 1–48 INPUT CH 1–48(*) STIN1L–STIN4R ST IN channel 1–4 (L/R) INS CH 1–48(*) INPUT CH 1–48(*) insert out INS MIX 1–16 MIX channel 1–16 insert out MATRIX INSERT1–8 MATRIX channel 1–8 insert out INS ST L, INS ST R, INS MONO(C) Insert-out of STEREO channel L/R or the MONO channel (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. The channel name is shown in the boxes immediately below. 62 M7CL V3 Editor Owner’s Manual J Output meter Indicates the level of the signal being output from the internal effect. K Parameter display select button If “046 REV-X Hall,” “047 REV-X ROOM,” “048 REV-X PLATE,” or VCM effect is selected as the effect type, this button switches between the standard parameter screen and a dedicated GUI screen. L MIX BALANCE Adjusts the balance of the effect sound relative to the original sound. 0 (%) outputs only the original sound, and 100 (%) outputs only the effect sound. L M TEMPO If a tempo-type or modulation-type effect is selected, this allows you to adjust timerelated parameters such as DELAY (delay time) and FREQ. (modulation speed). To set the value of the TEMPO parameter, you can either input the BPM (Beats Per Minute) in the numerical box, or repeatedly click the TAP TEMPO button at the desired tempo. If the MIDI CLK button is on, the TEMPO parameter value will synchronize to the MIDI timing clock being received from the MIDI port. M N SOLO If “044 M.BAND DYNA” or “045 M.BAND COMP” are selected as the effect type, these buttons allow you to monitor only the specified band from the three bands HIGH, MID, and LOW. N O GR meter If “044 M.BAND DYNA” or “045 M.BAND COMP” are selected as the effect type, this indicates the gain reduction amount for the H (HIGH), M (MID), and L (LOW) bands. O P Q P PLAY/REC (Play/Record) buttons If “042 FREEZE” is selected as the effect type, you can use these buttons to record and play back the signal being input to the effect. Q Effect parameters This area shows the effect parameters and knobs for the currently selected effect type. 63 M7CL V3 Editor Owner’s Manual EXTERNAL HA/EXT-ES HA page NOTE The EXT-ES HA page features VIEW switch buttons. Use these buttons to select the virtual rack display for SB168-ES or for others (AD8HR). If only the SB168-ES is connected, select the virtual rack display for SB168-ES. 1 2 34 5 6 A External HA name This shows the model name and ID number of the currently connected external head amp device. B GAIN This specifies the gain for each channel. The current value is shown in the box below. C 48V This switches the phantom power (+48V) on/off for each channel. D HPF (High Pass Filter) This switches the HPF on/off for each channel. E +48V MASTER If an AD8HR is connected, this indicates the on/off status of the master phantom power supply. F Slots/Channels Here you can select the slots/channels to which the audio outputs of the external head amp device are connected. On the M7CL-48ES, the EXT-ES HA assignment is fixed. NONE SLOT2 9-16 SLOT1 1-8 SLOT3 1-8 SLOT1 9-16 SLOT3 9-16 SLOT2 1-8 64 M7CL V3 Editor Owner’s Manual Meter window This window shows the signal levels of each section in the M7CL, letting you check for the presence of signals and whether an overload is occurring. This window is divided into INPUT METER and OUTPUT METER; to switch pages, click the tabs located at the top of the window. NOTE In order to view the M7CL’s signal levels in the Meter window, make sure that M7CL Editor and the M7CL itself are synchronized. INPUT METER page 1 2 3 A METERING POINT Select one of the following as the point where metering will occur. PRE HPF, PRE FADER, POST ON B PEAK HOLD Switches peak hold on/off. C Meters These peak level meters show the input level of each channel. The current fader value is shown in the box below. If clipping occurs at any one of the detection points in the channel, the ∑ segment will light. 65 M7CL V3 Editor Owner’s Manual OUTPUT METER page 1 2 3 A METERING POINT Select one of the following as the point where metering will occur. PRE EQ, PRE FADER, POST ON B PEAK HOLD This is the same as in the INPUT METER page. C Meters This is the same as in the INPUT METER page. 66 M7CL V3 Editor Owner’s Manual Group/Link window In this window you can select the channels that will be assigned to each DCA group and mute group. This window is divided into three pages; the DCA GROUP ASSIGN page, the MUTE GROUP ASSIGN page and CHANNEL LINK page. DCA GROUP ASSIGN page Here you can specify the channels that will be assigned to DCA groups 1–8. 1 2 3 4 A DCA group This is the number of the DCA group. B DCA group name This is the name of the DCA group. You can also click the mouse on this area to edit the name. C Grid This grid lets you assign channels (horizontal rows) to DCA groups (vertical columns). Currently-patched grids are indicated by a symbol. To enable or disable an assignment, click the desired grid. D CLEAR These buttons clear all channels assigned to the corresponding DCA group. When you click one of these buttons a window will appear, asking you to confirm the operation. To execute the Clear operation, click the OK button. 67 M7CL V3 Editor Owner’s Manual MUTE GROUP ASSIGN page Here you can specify the channels that will be assigned to mute groups 1–8. The upper part of the screen lets you assign input channels to mute groups, and the lower part of the screen lets you assign output channels to mute groups. 12 3 4 5 A Mute group This area shows the mute group number. B MUTE MASTER These buttons enable/disable each input channel or output channel mute group. C Grid This grid lets you assign channels (horizontal rows) to mute groups (vertical columns). Currently-patched grids are indicated by a symbol. To enable or disable an assignment, click the desired grid. D MUTE SAFE ON These buttons switch Mute Safe on/off for each channel. Channels for which this button is on will be excluded from mute groups. E CLEAR These buttons clear all input channels and output channels assigned to the corresponding mute group. When you click one of these buttons a window will appear, asking you to confirm the operation. To execute the Clear operation, click the OK button. 68 M7CL V3 Editor Owner’s Manual CHANNEL LINK page If you link two or more input channels, the parameters of these channels will interlock with each other and change simultaneously. 1 2 3 4 A Link buttons Use these buttons to select the link group A–Z (*) to which you want each input channel to be assigned. If you don’t want an input channel to be linked, select NONE. You can assign up to twenty-four (*) groups for INPUT CH 1–48, and up to two groups for ST IN channels. (*) During offline editing when M7CL-32 is selected in the System Setup dialogbox, or during online editing with the M7CL-32 connected, up to sixteen groups can be assigned for INPUT CH 1–32, and you’ll be able to choose from link groups A–R. B CLEAR ALL Clears the link settings for all channels. 69 M7CL V3 Editor Owner’s Manual C LINK PARAMETER This section enables you to select the parameters to interlock. HA Head amp gain and phantom power settings ATT Attenuation value EQ Equalizer settings DYNAMICS1 Dynamics 1 settings DYNAMICS2 Dynamics 2 settings MIX SEND Send amount from input channel to MIX bus MIX ON MIX SEND on/off MATRIX SEND Send amount from input channel to MATRIX bus MATRIX ON MATRIX SEND on/off FADER Fader level value CH ON Input channel module output on/off (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. NOTE The HA and FADER parameters will maintain level differences between linked channels. D SEND PARAMETER Specify the link status for each MIX/MATRIX SEND bus. 70 M7CL V3 Editor Owner’s Manual Scene window Here you can manage scene memories, and make various settings related to scene recall operations. This window is divided into SCENE MEMORY, RECALL SAFE, and FADE TIME pages. To switch pages, click the tabs shown in the upper part of the window. SCENE MEMORY page Here you can edit the M7CL’s scene memories. You can also load scene library files from a USB storage device or from a drive of your computer, and edit them. In this case, you can re-save all scenes to a file after editing, recall just a desired scene, or copy a desired scene to the scene memory of the M7CL itself. 1 2 3 4 5 A File name Indicates the file name of the currently-open scene library. B OPEN (Open a file) Opens a scene library file located on a drive of your computer. C CLOSE (Close a file) Closes the currently-open scene library file. D SAVE Saves the currently-open scene library file on a drive of your computer. 6 E SAVE AS (Save as a different name) Saves the currently-open scene library file under a different name on a drive of your computer. 71 M7CL V3 Editor Owner’s Manual F FILE This area lists the scenes in the file you opened using the OPEN button ( 2). The list includes the following items. HINT 7 To view items that are not currently shown, scroll the list to the right. 8 9 J K L M N G No. This is the scene number. H TITLE This is the scene title. You can also double-click this area and edit the title. I PROTECT This indicates whether protect is on or off for each scene. This area displays a lock icon for protected scenes; these scenes cannot be overwritten, nor their title edited. Read-only scenes are indicated by “R” displayed in this column. J COMMENT This column shows the comment assigned to each scene. You can also double-click this column and edit the comment. K FOCUS From the following list, choose the parameters that will be recalled by a Scene Recall. If you select ALL, the other buttons will be unavailable. Multiple selections are allowed for buttons other than ALL. ALL RACK HA IN PATCH OUT PATCH IN OUT WITH SEND(*) All the settings of the scene will be recalled GEQ and internal effect settings will be recalled Internal head amp and external head amp settings will be recalled Input patch settings will be recalled Output patch settings will be recalled Input channels (INPUT, ST IN, DCA) settings will be recalled except for head amp settings Output channel (MIX, MATRIX, STEREO/MONO) settings will be recalled Send settings to the output channels will be recalled (*) Can be selected only if OUT is selected L TIME STAMP Indicates the time at which the scene was last stored, in the format of month/day/year/hours/minutes/seconds. This column is only for display, and cannot be edited. M FADING This switches fading on/off for each scene. N FADE TIME Indicates the FADE TIME for each scene. You can edit the FADE TIME by double-clicking this field. 72 M7CL V3 Editor Owner’s Manual N O P Q R S O INTERNAL DATA This area shows the M7CL’s scene memory contents. The items displayed are the same as in the FILE list ( 6). As desired, you can copy single or multiple scenes between the FILE list and the INTERNAL DATA list, and copy or move them to a different location within a list. P STORE Stores the current settings to the scene that is selected in the list. Q RECALL Recalls the settings of the scene selected in the list. R CLEAR Clears the scene(s) selected in the list. (The title of the cleared scene(s) will be reset to [No Data!].) S UNDO Cancels the last-performed scene recall, store, copy, or move operation. T PROTECT Turns on the Protect setting for the scene(s) selected in the list. 73 M7CL V3 Editor Owner’s Manual RECALL SAFE page Here you can make settings for the Recall Safe function that excludes only specific channels from recall operations of all scenes. 1 2 3 A INPUT SAFE PARAMETERS In this area you can view and edit the Recall Safe settings for all input channels and ST IN channels. This area contains the following items. B SAFE ON/OFF These are on/off buttons that select the channels to be excluded from recall operations. C Parameter matrix grid Here you can select the parameters to be excluded from recall operations. If the ALL button is on, all parameters will be excluded. D SET ALL These buttons turn on all buttons for all input channels or ST IN channels, or for the corresponding parameter. E CLEAR ALL These buttons turn off all buttons for all input channels or ST IN channels, or for the corresponding parameter. 5 4 74 M7CL V3 Editor Owner’s Manual 6 7 8 9 J K L M N O F OUTPUT SAFE PARAMETERS In this area you can view and edit the Recall Safe settings for all output channels. The items in this area are the same as in the Input Safe Parameters area (1). G GLOBAL RECALL SAFE In this area you can view and edit the Recall Safe settings for patching, DCA groups, and racks. H INPUT PATCH This on/off button specifies whether INPUT PATCH settings will be excluded from recall operations. I INPUT NAME This on/off button specifies whether the channel names of input channels will be excluded from recall operations. J OUTPUT NAME This on/off button specifies whether the channel names of output channels will be excluded from recall operations. K OUTPUT PATCH This on/off button specifies whether OUTPUT PATCH settings will be excluded from recall operations. L DCA These buttons exclude DCA groups from recall operations. If the ALL button is on, the LEVEL, ON, and DCA group names will be excluded. If the LEVEL/ON button is on, LEVEL and ON settings will be excluded. M RACK This on/off button specifies whether RACK settings will be excluded from recall operations. N SET ALL This button switches on all buttons for parameters 8–13. O CLEAR ALL This button switches off all buttons for parameters 8–13. 75 M7CL V3 Editor Owner’s Manual FADE TIME page 1 2 3 Here you can make settings for the Fade Time function which adjusts the time over which fader and pan will reach their new values when a scene is recalled. Since the Fade function settings are independent for each scene, you must recall the desired scene before you make these settings. A INPUT CHANNEL FADING ENABLE These on/off buttons select the input channels that will be excluded from recall operations. B SET ALL This button switches on the buttons of all input channels. C CLEAR ALL This button switches off the buttons of all input channels. 76 M7CL V3 Editor Owner’s Manual 4 5 6 7 8 D OUTPUT CHANNEL FADING ENABLE These are on/off buttons that select the output channels that will be excluded from recall operations. E SET ALL This button switches on the buttons of all output channels. F CLEAR ALL This button switches off the buttons of all output channels. G FADING ENABLE This button enables/disables the Fade function for the faders of the current scene. H FADE TIME Drag this knob in the screen to adjust the fade time. The current value is shown in the numerical box immediately below. 77 M7CL V3 Editor Owner’s Manual User Defined Keys Setup window In this window, you can specify the functions or parameters to be assigned to the User Defined keys. 1 2 3 NOTE INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. A CURRENT USER Displays the name of the user currently logged into the M7CL console. If the M7CL has not yet been synchronized with the Editor, this field displays “ Administrator.” B EDIT Displays and enables you to specify the user level (Administrator, Guest, or Ext.User) of the User Defined keys that you are editing. “Ext.User” is the user who is currently logged into the M7CL console via a user authentication key stored on a USB storage device. You can select this user only when the M7CL console is synchronized with the Editor. NOTE Ext.User’s User Defined key settings will not be stored in a session file. C Function names Select the functions or parameters you wish to assign to the User Defined keys. Click a User Defined key to open the Parameter List dialog box. For more information on the assignable parameters, please refer to the “M7CL Version3 Owner’s Manual.” 78 M7CL V3 Editor Owner’s Manual Sends On Fader window SENDS ON FADER mode enables you to adjust the send level to the MIX/MATRIX bus using the fader. In this mode, the signals sent from all input channels to a specific MIX/MATRIX bus can be adjusted simultaneously. Use the SENDS ON FADER button in the Master window to switch this mode on and off. To display this window, do one of the following: • Select [Sends on Fader] in the [Windows] menu. • Click the SENDS ON FADER button in the Master window. In SENDS ON FADER mode, the color and function of the [ON] button and the fader in the Overview window will change. [ON] button Fader Color of the send destination Send is on. Gray Send is off. Color of the send destination The signal is sent to the bus. Gray The signal is NOT sent to the bus. Click the button (in the Sends On Fader window) for the MIX/MATRIX bus for which you want to adjust the send level. Then switch the send level off or on, and adjust the send level using the [ON] button and fader for the input channel displayed in the Overview window. NOTE For MATRIX bus send, not only the input channels but MIX channels and STEREO/MONO channels can be in SEND ON FADER mode. 79 M7CL V3 Editor Owner’s Manual Output Port window In the Output Port window you can assign the source channel for each output port and set the parameters. 1 2 3 4 5 6 8 7 9 J K The window includes the following items. A Output port select tabs These tabs switch the output ports controlled in the window in groups of up to eight ports. B DELAY SCALE field Here you can select the units for the delay time shown below the delay time knob ( H). •METER(343.59m/s) The delay time is shown as a distance in meters, calculated as the speed of sound (343.59 m/s) at an air temperature of 20°C (68°F) multiplied by the delay time (seconds). •FEET(1127.26ft/s) The delay time is shown as a distance in feet, calculated as the speed of sound (1127.26 feet/s) at an air temperature of 20°C (68°F) multiplied by the delay time (seconds). •SAMPLE The delay time is shown as a number of samples. If you change the sampling frequency at which the M7CL operates, the number of samples will change accordingly. •msec The delay time is shown in units of milliseconds. If this button is on, the same value is displayed above and below the delay time (G). C Output port This indicates the type and number of the output port to which the channel is assigned. D Channel select button This button lets you select the channel that is assigned to the output port. E Channel name Indicates the name of the channel that is assigned to the corresponding output port. F DELAY button Switches the output port delay on/off. 80 M7CL V3 Editor Owner’s Manual G Delay time The millisecond delay time value is shown above the knob. The delay time value in the units selected in the DELAY SCALE field ( B) is shown below the knob. Click the ▲/▼ buttons to make detailed settings. H Delay time knob This knob sets the delay time of the output port. Rotate (by dragging) this knob to set the delay time. I Ø(Phase) button Switches the phase of the signal assigned to the output port between normal phase (black) and reverse phase (orange). J ATT knob Adjusts the amount of attenuation for the signal assigned to the output port. To change the value, rotate (by dragging) the knob in the screen. You can adjust the setting in 0.1 dB steps over a range of –96 to +24 dB. The current value is shown immediately below the knob. K Level meter This meter indicates the level of the signal assigned to the output port. 81 M7CL V3 Editor Owner’s Manual Keyboard Shortcuts Key operation Menu Action Windows File menu Mac Creates a new Session Ctrl+N +N Opens a previously saved Session Ctrl+O +O Saves the current Session Ctrl+S +S Undo Ctrl+Z +Z Redo Ctrl+Y +Y Closes the active window Ctrl+W +W Closes all windows Ctrl+Alt+W +Option+W Tiles all windows Ctrl+T +T Cascades all windows Ctrl+Alt+T +Option+T Opens the Master window Ctrl+1 +1 Opens the Sends On Fader window Ctrl+2 +2 Opens the INPUT CH (CH1-16) window Ctrl+Alt+1 +Option+1 Opens the INPUT CH (CH17-32) window Ctrl+Alt+2 +Option+2 Opens the INPUT CH (CH33-48) window(*) Ctrl+Alt+3 +Option+3 Opens the ST IN window Ctrl+Alt+4 +Option+4 Opens the MIX window Ctrl+Alt+5 +Option+5 Opens the MATRIX window Ctrl+Alt+6 +Option+6 Opens the STEREO/MONO window Ctrl+Alt+7 +Option+7 Opens the DCA window Ctrl+Alt+8 +Option+8(**) Opens the Selected Channel window Ctrl+3 +3 Opens the Library window Ctrl+4 +4 Opens the Patch Editor window Ctrl+5 +5 Opens the Rack window Ctrl+6 +6 Opens the Meter window Ctrl+7 +7 Opens the Group/Link window Ctrl+8 +8 Opens the Scene window Ctrl+9 +9 Opens the Re-Synchronize window Ctrl+0 +0 Selects consecutive multiple items (memories) Shift+click Shift+click Selects non-consecutive multiple items (memories) Ctrl+click +click Selects all memories in a section Ctrl+A +A Edit menu Windows menu Synchronization menu Library window or SCENE MEMORY page of the Scene window (*) It can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. (**) Modify or cancel the shortcut assignment for the Universal Access Zoom function, or use the number key <8>. 82 M7CL V3 Editor Owner’s Manual Index B L BYPASS .......................................... 62 Library window ............................. 49 C M CLEAR ...................................... 51, 73 CLEAR ALL .................. 52, 69, 74–77 CLOSE ...................................... 49, 71 COMMENT ................................... 72 Ctrl(#)+click .................................. 12 Ctrl(#)+Shift+Click ....................... 12 Master window .............................. 13 MATRIX Bus Setup ....................... 17 MATRIX SEND ............................. 26 MATRIX window .......................... 24 Meter window ................................ 65 MIX BALANCE ............................. 63 MIX Bus Setup ............................... 17 MIX/CH/ST IN .............................. 25 MIX/MATRIX SEND .................... 31 MONO ........................................... 47 Mute group .................................... 68 MUTE MASTER ............................ 68 MUTE SAFE ON ........................... 68 D DCA fader ...................................... 28 DCA group ..................................... 67 DCA window ................................. 28 DIRECT OUTPUT PATCH page . 54 E Effect GR meter .................................. 63 SOLO ........................................ 63 EFFECT module ............................ 61 Effect parameters ........................... 63 EFFECT TYPE ............................... 62 EQ FLAT ........................................ 60 F Fade ................................................ 77 Fade function (enables/disables) ... 77 FADE TIME page ........................... 76 FADING ENABLE ......................... 76 FILE .......................................... 50, 72 File Close ................................... 49, 71 Open ................................... 49, 71 FROM MIX, ST/MONO ............... 44 G GEQ faders ..................................... 60 GEQ graph ..................................... 60 GEQ module .................................. 58 Group/Link window ...................... 67 CHANNEL LINK page ............ 69 DCA GROUP ASSIGN page ... 67 MUTE GROUP ASSIGN page 68 I INPUT CH window ....................... 16 INPUT INSERT PATCH page ...... 53 INPUT PATCH page ..................... 52 INTERNAL DATA .................. 50, 73 K Keyboard Shortcuts ....................... 82 O Offline Edit .................................... 12 OPEN ........................................49, 71 OUTPUT INSERT PATCH page .. 54 OUTPUT PATCH page ................ 53 Output Port window ..................... 80 P Patch Editor window ..................... 52 DIRECT OUTPUT PATCH page 54 INPUT INSERT PATCH page 53 INPUT PATCH page ............... 52 OUTPUT INSERT PATCH page . 54 OUTPUT PATCH page ........... 53 PATCH LIST page ................... 55 PATCH LIST page ......................... 55 PLAY/REC ..................................... 63 PROTECT .................................72, 73 R Rack window ................................. 56 RECALL ....................................51, 73 Recall Safe ...................................... 74 RECALL SAFE page ....................... 74 REDO ............................................. 10 Re-synchronize .............................. 12 RECALL SAFE page .................74 SCENE MEMORY page ...........71 Selected Channel window ..............29 Channel selection ...............30, 47 COMPANDER .........................36 COMPRESSOR, EXPANDER ..35 DCA GROUP/MUTE GROUP 39 DE-ESSER .................................37 EQUALIZER .......................33, 42 Fader .............................39, 46, 48 FROM MIX, ST/MONO ..........44 GATE/DUCKING ....................34 HA GAIN/Ø/HP .......................31 Input channel ...........................29 INSERT .....................................38 MATRIX channel .....................44 MIX channel .............................40 MIX/MATRIX SEND ...............31 Pan / Fader ................................43 RECALL SAFE/MUTE SAFE ...39 STEREO/MONO channel ........47 To MATRIX ..............................40 TO STEREO/MONO .........32, 41 Sends On Fader window ................79 Sessions .............................................7 SET ALL ....................................74–77 Setup Mixer ...........................................4 System .........................................2 ST IN window ................................20 STEREO/MONO window .............26 STORE ......................................51, 73 Synchronize ....................................12 T Tabs .................................................11 TEMPO ...........................................63 TIME STAMP ................................72 U UNDO ................................10, 51, 73 User Defined Keys Setup window .78 USER KEY ........................................5 S SAVE .........................................49, 71 SAVE AS ...................................49, 71 Save as a different name .......... 71 Save under a different name ... 49 SCENE MEMORY page ................ 71 Scene window ...........................71, 78 FADE TIME page .................... 76 U.R.G., Pro Audio Division © 2005-2010 Yamaha Corporation 83 PM5D Editor Owner’s012IP-E0 Manual-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
Yamaha V3 El manual del propietario
- Categoría
- Software
- Tipo
- El manual del propietario
- Este manual también es adecuado para
En otros idiomas
- français: Yamaha V3 Le manuel du propriétaire
- italiano: Yamaha V3 Manuale del proprietario
- English: Yamaha V3 Owner's manual
- Deutsch: Yamaha V3 Bedienungsanleitung
- русский: Yamaha V3 Инструкция по применению
- Nederlands: Yamaha V3 de handleiding
- português: Yamaha V3 Manual do proprietário
- dansk: Yamaha V3 Brugervejledning
- polski: Yamaha V3 Instrukcja obsługi
- čeština: Yamaha V3 Návod k obsluze
- svenska: Yamaha V3 Bruksanvisning
- Türkçe: Yamaha V3 El kitabı
- suomi: Yamaha V3 Omistajan opas
- română: Yamaha V3 Manualul proprietarului
Documentos relacionados
-
Yamaha M7CL El manual del propietario
-
Yamaha M7CL El manual del propietario
-
-
-
-
-
-
-
-
