INSTRUCTION MANUAL
PJ-10 Version 1.0 1/1
PJ-10
WARNING:
⋅ Installation by qualified personnel only.
⋅ Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
⋅ Ensure that all speakers have the same polarity with
respect to each other.
⋅ Do not select another tapings if the speaker is in use.
⋅ No naked flame sources, such as lighted candles,
should be placed on the apparatus.
CEILING SPEAKER
SPECIFICATIONS
Model PJ-10
Loudspeaker 5”
Rated power (RMS) 10 W
Power taps 10 W, 5 W & 2’5 W
Impedance 1 kΩ, 2 kΩ & 4 kΩ
Sensitivity SPL (1 W / 1 m) 91 dB SPL a 1 W, 1 m & 1 kHz
Sound pressure SPL (20 W / 1 m) 101 dB SPL a 10 W, 1 m & 1 kHz
Freq. Range 150 ~ 15.000 Hz
Dimensions (mm) Ø 138 x 205 (depth)
Weight 1,6 kg
Finish ABS plastic
Colour White, RAL 9016
Mounting U type orientable bracket
Power selection By cables
Impedance 100 V 70 V Cable
1 kΩ 10 W 5 W Red
2 kΩ 5 W 2’5 W Yellow
4 kΩ 2’5 W 1’25 W Green
COM Common Common Blue
POWER SELECTION