Lift Bridge Kitchen & Bath 48VSIEWAL-A Guía del usuario
- Tipo
- Guía del usuario
PRODUCT ATTRIBUTES
SCRATCHES
TEMPERATURE
STAINS
SUPERFICIAL
HUMIDITY
SPRAINS -
CRACKS
Distributed in North America by LIFT BRIDGE KITCHEN & BATH
(Strategic Retail Solution)
(888) 930-8528
Distributed in other countries by FIRPLAK S.A
(+57 4) 444-1771
Manufactured and distributed by MILESTONE MUEBLES S.A.S
(+57 1) 796-5340
LIFT BRIDGE
KITCHEN & BATH
DRAWERS
Easy to assemble metal sided drawers.
Metal sided drawers can support a
maximum load of 55 lbs.
Up to 100,000 openings guaranteed by
Soft-closing mechanism allows drawers
HARDWARE
Up to 40,000 openings guaranteed by
each soft-closing hinge.
Steel hangers support a maximum load of
440 lbs. per cabinet.
WARNING
If you are concerned about the weight of the cabinet on the wall, we recommend using the
optional support legs (sold separately).
MATERIAL
Melamine material gives greater
resistance to:
Resistant to moisture and extreme temperatures.
Multiple melamine color options available.
Edge band on every exposed edge.
each drawer.
to always close soft and silent.
Double-wall mounting plate allows for easy
installation.
If purchased in North America, please contact
the Lift Bridge Kitchen & Bath customer service
at (888) 930-8528 or
This furniture is manufactured with wood
from cultivated forests and is covered with:
Melamine material which gives
a greater resistance to:
M
E
L
A
M
I
N
A
C
A
D
E
x
c
l
u
s
i
v
M
O
D
U
A
R
T
®
SCRATCHES
STAINS
SUPERFICIAL
HUMIDITY
SPRAINS -
CRACKS
M
N
U
F
T
U
R
E
W
I
T
H
E
e
f
o
r
TEMPERATURE
Scan this QR for multimedia help
Questions, problems, missing
parts?
If purchased in other countries,
please contact the Firplak S.A customer service
at (+57 4) 444-1771 or
servicioalcliente@firplak.com
Please read all instructions carefully.
Use a dry cloth to clean.
Fill the lower drawers first. Avoid opening
more than one drawer at a time.
Avoid getting the cabinet wet.
Do not allow children to climb on
the cabinet.
Do not paint the cabinet.
Do not drag the cabinet, empty the
cabinet and then lift and move.
READ BEFORE ASSEMBLY
RECOMMENDATIONS AND WARNINGS
Handle with care. Do not drop, handle
roughly, or overtighten screws as this will
cause damage to the wood.
We recommend using two people to assemble,
move or lift the cabinet.
Please contact the appropriate customer
service team if you have any questions.
The production lot number on the last page of
the installation manual will be needed
for warranty issues.
CERTIFICATE OF GUARANTEE
For us it is essential to work with high quality
materials and under certified processes
ISO 9001.
Our furniture has a 10-year Limited Warranty from
the date of purchase. It covers defects or parts
that prevent the correct assembly or usage.
This warranty includes the replacement of defective
parts and is valid as long as the assembly
instructions have been followed.
This warranty excludes damage caused by external
factors, deterioration due to being installed on
wet walls or damage from being exposed
directly to water.
Proof of purchase (original sales receipt) must be
made available for all warranty claims.
1010
This warranty excludes furniture that has been
assembled incorrectly and modified or repaired.
Cleaning High Gloss Finishes / Limpieza para acabado brillante
This material is manufactured with a high-gloss coating called a gel-coat which becomes an integral part of the product.
The gel coat layer is resistant to most staining agents. However, products containing harsh chemicals or acids (hair color,
acetone nail polish remover, etc.) can damage the finish if allowed to remain on gel coat surface for an extended period.
Any cleaning should be handled the same as the automotive finish on your car. Use a mild non-abrasive cleanser, liquid
dish soap, baking soda and water, or vinegar and water with a soft cloth or sponge. (Do not use scotch-brite pads, scour-
ing pads, steel wool, scrapers, or sandpaper) DO NOT USE ABRASIVE CLEANERS.
Before using any cleaner, be sure to read the label for recommended usage and warnings. To remove hard water stains
or mineral deposits, use a vinegar soaked soft cloth to soak area for an extended period and then wipe clean. Protect the
surface with regular applications of automotive wax.
Este material se fabrica con un recubrimiento de alto brillo denominado gel coat que se convierte en una parte integral del
producto. La capa de revestimiento de gel es resistente a la mayoría de las manchas. Sin embargo, los productos que
contienen químicos fuertes o ácidos (colorante para el cabello, removedor de esmalte de uñas de acetona, etc.) pueden dañar
el acabado si se deja permanecer en la superficie del gel coat durante un período prolongado.
Cualquier limpieza se debe manejar igual que el acabado automotriz en su coche. Use un limpiador no abrasivo, suave, jabón
líquido para platos, bicarbonato de sodio y agua, vinagre y agua con un paño suave o una esponja. (No utilice esponjas
scotch-brite, almohadillas de fregar metálicas, raspadores o papel de lija) NO UTILICE LIMPIADORES ABRASIVOS.
Antes de usar cualquier limpiador, asegúrese de leer la etiqueta para el uso recomendado y las advertencias. Para eliminar
manchas de agua dura o depósitos de minerales, use un paño suave empapado de vinagre para remojar el área por un perío-
do prolongado y luego limpie. Proteja la superficie con aplicaciones regulares de cera automotriz.
Cultured Marble / Mármol cultivado
Maintenance Guide
Sinks, laundry sinks and kitchen
sinks
Guía de mantenimiento / Lavamanos,
lavarropas y lavaplatos.
Cultured Marble is a man-made, chemically bonded, mineral-filled, polymeric material, which is molded and hardened in
a variety of shapes.
El mármol cultivado es un material polimérico de origen mineral, químicamente fusionado, fabricado artificialmente que se
moldea y endurece en una variedad de formas.
Distributed by:
Liftbridge Kitchen & Bath.
For customer support please email : support@strategicretail-
solutions.com, or call (888)930-8528.
Manufactured by FIRPLAK S.A
(574) 444 1771
servicioalcliente@firplak.com
To remove fine scratches, scuffmarks or light stains from your high gloss product use an automotive buffing compound
or baking soda and a hand-held polisher.
Deeper scratches may require wet sanding with appropriate sandpaper (600, 800, 1000). To bring the shine back, buff
with an automotive buffer and polishing compound.
Do not use rubbing compound, as this is too coarse. A professional should handle deep scratches. You MUST be careful
NOT to buff or sand through the gel coat surface. Once this is done, the piece is no longer protected in that spot. Protect
the surface with regular applications of automotive wax.
Para quitar rayones superficiales o las manchas ligeras de su producto con apariencia brillante utilice cera para automóviles
o un bicarbonato de sodio y un pulidor manual.
Las rayas más profundas pueden requerir lijado en húmedo con papel de lija apropiado (600, 800, 1000). Para traer el brillo
de nuevo, puede utilizar cera para automóviles.
No utilice rubbing compound (pasta pulidora) ya que es demasiado abrasiva. Un profesional debe manejar rayas profundas.
Debe tener cuidado de no pulir con polvo o arena sobre la superficie del producto. Una vez hecho esto, la pieza ya no estará
protegida en ese lugar. Proteja la superficie con aplicaciones regulares de cera para automóviles.
Removing scratches – High Gloss Finishes / Para eliminar rayones en acabado brillante
-
1
-
2
-
3
-
4
-
5
