Avanti IM12CIS Manual de usuario

Categoría
Fabricantes de cubitos de hielo
Tipo
Manual de usuario
ICE MAKER/MAQUINA DE HACER HIELO
INSTRUCTION MANUAL/MANUAL DE INSTRUCCIONES
Model Number / No. de Modelo:
IM12C-IS
BEFORE
USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en español empieza en la página 13.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications
without notice.
Avanti Products LLC
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
TABLE OF CONTENTS
Ice-Maker Safety
3
Important Safeguides
4
Help Us Help You
5
Parts and Features
6
Important Safety Instructions
7
Installation Instructions
7
Before Using Your Appliance
7
Installation of Your Appliance
7
Electrical Connection
8
Operating Your Appliance
9
Control Panel Description
9
Operating Instructions
9
Getting Ice from Ice-bin
9
Care and Maintenance
10
Cleaning Your Appliance
10
Space Requirements
10
Power Failure
10
Troubleshooting Guide
11
Service for Your Appliance
11
Your Avanti Products Warranty
12
Instrucciones en Español
13 - 17
Registration Information and Registration Card
19
2
ICE MAKER SAFETY
YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT.
We have provided many important safety messages in this manual for your appliance. Always read and
obey all safety messages.
This is the safety alert symbol. This symbol alerts you to
Potential hazards that can kill or injure you and others.
All safety messages will follow the safety alert symbol
And either the wordsDANGER, WARNINGor CAUTION”.
Danger means that failure to heed this safety
statement may result in severe personal
injury or death.
Warning means that failure to heed this
safety statement may result in extensive
product damage, serious personal injury, or
death.
Caution means that failure to heed this
safety statement may result in minor or
moderate personal injury, property or
equipment damage.
All safety messages will alert you to know what potential hazard is, tell you how to reduce the chance of
injury, and let you know what can happen if the instructions are not followed.
3
IMPORTANT SAFEGUIDES
Before the appliance is used, it must be properly positioned
and installed as described in this manual, so read the manual
carefully. To reduce the risk of fire, electrical shock or
injury when using the appliance, follow basic precaution,
Including the following:
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an
extension cord.
It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that
cannot be turned off by a switch or pull chain.
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do
not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
The fumes can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is
disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical
shock or death.
Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this
manual. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
Use two or more people to move and install appliance. Failure to do so can result in back or other injury.
To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose
a well-ventilated area with temperatures above 6f (16
°
c) and below 90°f (32°c). This unit must be installed in
an area protected from the element, such as wind, rain, water spray or drips.
The appliance should not be located next to ovens, grills or other sources of high heat.
The appliance must be installed with all electrical, water and drain connections in accordance with state and
local codes. A standard electrical supply (115 v ac only, 60 hz), properly grounded in accordance with the
national electrical code and local codes and ordinances is required.
Do not kink or pinch the power supply cord of appliance.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the appliance to be leveled in order to work properly. You may need to make several
adjustments to level it.
All installation must be in accordance with local plumbing code requirements.
Make certain that the pipes are not pinched or kinked or damaged during installations.
Check for leaks after connection.
Never allow children to operate, play with or crawl inside the appliance.
If you use the drainage container, you must set the drain select switch to off or the water can overflow from the
drainage container
Although the unit has been tested at the factory, due to long-term transit and storage, the first batch of cubes
must be discarded.
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or discolor
the interior.
Do not use this apparatus for other than its intended purpose.
4
Help us help you…
Read this guide carefully.
It is intended to help you operate and maintain
your new ice maker properly.
Keep it handy to answer your questions.
If you don't understand something or you need
more help, please call:
Avanti customer service
800-220-5570
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
Write down the model and serial numbers.
You'll find them on a plate located on the rear
wall of the ice maker.
Please write these numbers here:
____________________________________
Date of purchase
____________________________________
Model number
____________________________________
Serial number
Use these numbers in any correspondence or
service calls concerning your ice maker.
If you received a damaged ice maker,
immediately contact the dealer (or builder) that
sold you the ice maker.
Save time and money. Before you call for
service, check the troubleshooting guide. It lists
causes of minor operating problems that you
can correct yourself.
If you need service
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further assistance.
First, contact the people who serviced your ice
maker. Explain why you are not pleased. In
most cases, this will solve the problem.
Next, if you are still not pleased, write all the
details, including your telephone number, and
send it to:
Customer Service
Avanti Products
10880 NW 30
th
Street
Miami, Fl 33172 USA
5
PARTS AND FEATURES
1
Silicon Drain Plug
2
Water Tank
3
Compressor
4
Power Plug
5
Top Lid
6
Top Window
7
Back Cover
8
Control Panel
9
Water Tray
10
Evaporator
11
Ice Scoop
12
Ice Basket
6
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electrical shock, or
injury when using your ice maker, follow these
basic precautions:
Read all instructions before using the ice maker.
Danger or Warning: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous. . . Even if they will “just sit in the garage a few days.”
Never allow children to operate, play with, or crawl inside the appliance.
Never clean ice maker parts with flammable fluids. The fumes can create a fire hazard or
explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this
or any other ice maker. The fumes can create a fire hazard or explosion.
-save these instructions-
INSTALLATION INSTRUCTIONS
Before Using Your Ice Maker
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
1 Instruction Manual
1 Ice Scoop
Before connecting the ice maker to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Installation Of Your Ice Maker
Locate the ice maker away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the ice maker not to perform
properly.
Plug the ice maker into an exclusive properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and or grounding should be directed toward a certified electrician or an
authorized Avanti products service center.
IMPORTANT: Do not install the Ice maker near an oven, radiator, or other heat source.
7
ELECTRICAL CONNECTION
This appliance should be properly grounded for your safety. The power cord of this appliance is
equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the
possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For
personal safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong.
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly
grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to
have it replaced with a properly grounded 3-prong wall outlet.
The cord should be secured behind the appliance and not left exposed or dangling to prevent
accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage
rating that matches the rating label on the appliance. This provides the best performance and also
prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug
the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the
receptacle. Repair or replace immediately all power cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.
When moving the appliance, be careful not to damage the power cord.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do
not use an extension cord with this appliance. However, if you must use an extension cord it is
absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord
having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least
10 amperes.
SURGE PROTECTOR
Most electrical appliances use a series of electric control boards to operate. These boards are very
susceptible to power surges and could be damaged or destroyed.
If the appliance is going to be used in an area or if your city / country is prone to power surges / outages;
it is suggested that you use a power surge protector for all electrical devices / appliances you use. The
surge protector that you select must have a surge block high enough to protect the appliance it is
connected to. If you have any questions regarding the type and size of surge protector needed contact
a licensed electrician in your area.
Damages due to power surges are not considered a manufacturer covered defect and will void your
product warranty.
Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avanti Products service center.
8
OPERATING YOUR ICE MAKER
Control Panel Description
LED INDICATORS
POWER INDICATOR
The indicator above the word ICE will flash when the unit is plugged in.
It will lit green when the unit is turned on.
ADD WATER INDICATOR
The ice maker automatically checks the
water level in the tank. If the water level
is too low, the indicator will illuminate in
RED and will stop working automatically.
The ICE indicator will flash.Once you
add water to the unit and push the
ON/OFF button the indicator will turn off
and will resume normal operation.
ICE FULL INDICATOR
When the ice-bin is full, the indicator will illuminate in RED. The indicator will remain lit until the ice
in the bin either melts away slowly or has been removed. The unit will stay in a “Standby” mode
until the ice has been removed / melted at which time the unit will automatically start operation as
normal.
Operating Instructions
Starting your Ice maker
Open the top cover and remove the ice basket.
Remove any dust or objects that may be in the water tank
Fill the water tank up to the area marked “MAX.
The ice-maker will automatically check the water level in the
reservoir periodically. The ice maker will detect any shortage
of water and will stop the ice-making cycle, then the ADD
WATER indicator will be lit.
Fill the reservoir with water and press the ON/OFF button to
restart the ice-making cycle and the ADD WATER indicator
goes out as the ice-maker will begin it’s normal operation cycle automatically.
When the ice cubes are collected and reach the bin sensor, the ice maker will stop
operating and the ICE FULL indicator will be lit.
WARNING:
Direct sunlight may affect the infrared sensors and cause the unit to malfunction.
If at any time the unit does not stop the ice-making operation even when the ice-bin is full, move the
unit to another location where it is out of direct sunlight.
For best performance, water temperature should be between 7°C (45ºF) and 35°C (95ºF)
and ambient between 15°C (59ºF) and 25°C (77ºF).
Getting Ice from the Ice-bin
Open the top cover to access the ice basket.
Remove the amount of ice as desired and close the top.
9
CARE AND MAINTENANCE
Caution
Failure to unplug the ice maker could result in electrical shock or personal injury.
Cleaning Your Ice Maker
To ensure the cleanliness of the ice cubes, water in the reservoir should be replaced every 24
hours.
Remove the drain plug to drain remaining water from the water reservoir when the ice maker will not
be used for long period of time. Screw the drain plug back in place after the water has been drained.
Always change with fresh water before starting ice production at initial installation or after long
shut-off periods.
Please clean your Ice maker regularly. When cleaning, unplug the unit and remove the ice cubes.
Use a diluted solution of water and vinegar to clean the inside and the outside surface of the Ice
maker. Do not spray Ice maker with chemicals or diluted agents such as acids, gasoline or oil.
Rinse thoroughly before starting.
Space Requirements
During transportation, the incline angle of the cabinet should not be over 45°
Do not turn the Ice maker upside down. Problems could occur in the compressor and sealed
system.
The Ice maker should be placed horizontally on a properly leveled surface.
To ensure proper ventilation for your Ice maker allow 6” of space at the top, the back and on each
side.
Before using the Ice maker for the first time, please wait 2 hours after positioning it.
Clean the inner liner, ice-bin, water box, water cup frequently.
IMPORTANT: Do not install the Ice maker near an oven, radiator, or other heat source.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your ice
maker if you minimize the number of times the ice-bin is opened. If the power is going to be OFF for a
longer period of time, you need to take the proper steps to disconnect your appliance.
10
PROBLEMS WITH YOUR ICE MAKER?
You can solve many common ice maker problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
Problem
Suggested Solutions
The compressor works
abnormally with a buzzing
Noise.
recommended.
Stop the ice maker and do not restart
until the voltage is normal.
Water shortage indicator
Light is on.
the reservoir.
Press the ON/OFF button, fill with water,
wait 3 minutes and press the power
button again to restart.
Ice full indicator light is on.
Remove some of the ice.
Indicator lights are off.
Replace fuse / turn power on.
The ice made is too large
and with pieces sticking
together.
storage tray or ambient is too
Stop the machine and reset the ice
making cycle. Restart the machine after
turning it off.
Conditions for ice making
cycle are right but no ice is
made.
system is blocked.
Replace unit.
Service For Your Ice Maker
We are proud of our customer service organization and the network of professional service technicians
that provide service on your Avanti ice maker. With the purchase of your Avanti ice maker, you can be
confident that if you ever need additional information or assistance, the Avanti Products Customer
Service team will be here for you. Just call us toll-free.
Avanti Products Customer Services
Product information
800-323-5029
Whatever your questions are about our products,
help is available.
Part orders
800-220-5570
You may order parts and accessories that will be
delivered directly to your home, by personal
check, money order, master card, or visa.
In-home repair service
800-220-5570
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your ice maker inside and out.
11
YOUR AVANTI PRODUCTS
WARRANTY
Staple your sales receipt here. Proof of original
purchase date is needed to obtain service under
warranty.
WHAT IS COVERED LIMITED ONE-YEAR WARRANTY
Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of
twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon the
date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless
described in detail in the warranty document. For one year from the date of purchase by the original owner, Avanti
products will, at its option, repair or replace any part of the product which proves to be defective in material or
workmanship under normal use. Avanti Products will provide you with a reasonably similar product that is either
new or factory refurbished. During this period Avanti Products will provide all parts and labor necessary to correct
such defects free of charge, so long as the product has been installed and operated in accordance with the written
instructions in this manual. In rental or commercial use, the warranty period is 90 days. All Avanti appliances of 3.5
cubic feet capacity or less must be brought/sent to the appliance service center for repair.
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY
For the second through the fifth year from the date of original purchase, Avanti Products will provide a replacement
compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental
or commercial use, the limited compressor warranty is one year and nine months. Costs involved to move the
product to the service center and back to the user’s home, as maybe required, are the user’s responsibility.
WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:
The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti
Products, including without limitation, one or more of the following:
A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes,
regulations, or laws, including failure to install the product in strict conformity with local fire and building codes
and regulations.
Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand,
floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity, lightning,
power surges, structural failures surrounding the appliance, and acts of God.
Content losses of food or other content due to
spoilage.
Incidental or consequential damages
Parts and labor costs for the following will not be
considered as warranty:
Evaporator doors, door springs, and/or frames.
Inner door panels, door shelves, door rails, and/or
door supports.
Light bulbs and/or plastic housing.
Plastic cabinet liners.
Punctured evaporator that voids the warranty on
the complete sealed system.
Shipping and handling costs associated with the
replacement of the unit.
Repairs performed by unauthorized servicers.
Service calls that are related to external problems,
such as abuse, misuse, inadequate electrical power,
accidents, fire, floods, or any other acts of God.
Failure of the product if it is used for other than it
intended purpose.
The warranty does not apply outside the Continental
USA.
Surcharges including but not limited to, any after
hour, weekend, or holiday service calls, tolls, ferry
trip charges, or mileage expense for service calls to
remote areas.
In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding property,
including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also excluded from this
warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces and exposed parts;
Products on which the serial numbers have been altered, defaced or removed; service visits for customer
education, or visits where there is nothing wrong with the product; correction of installation problems (you are solely
responsible for any structure and setting for the product, including all electrical, plumbing and/or other connecting
facilities, for proper foundation/flooring, and for any alterations including without limitation cabinetry, walls, floors,
shelving etc., as well as the resetting of breakers or fuses.
OUT OF WARRANTY PRODUCT
Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including repairs,
pro-rates, or product replacement, once this warranty has expired.
WARRANTY REFRIGERATION - COMPRESSOR
12
MEDIDAS DE PRECAUCION IMPORTANTES
ADVERTENCIA
Para reducir el riesgo de un incendio, choque
eléctrico o daños personales cuando use la
máquina de hacer hielo, siga estas
precauciones básicas.
Lea todas las instrucciones antes de usar la máquina de hacer hielo.
Peligro o Advertencia: riesgo de niños atrapados.
Los niños atrapados o sofocados no so un problema del pasado. Electrodomésticos
abandonados aun son peligrosos…aun cuando “solo estarán en el garaje un par de días”.
Antes de botar su máquina de hacer hielo: Retire la bandeja de hielo.
Nunca permita que los niños operen, jueguen con o se introduzcan en la máquina.
Nunca limpie la máquina de hacer hielo o las piezas con líquidos inflamables. Los vapores
pueden causar peligro de fuego o explosión.
No guarde ni use gasolina u otros vapores o líquidos inflamables cerca a este u otra
máquina de hacer hielo. Los vapores pueden causar peligro de fuego o explosión.
-guarde estas instrucciones -
INSTRUCCIONES DE INSTALACION
Antes de usar su Máquina de Hacer Hielo
Retire el empaque interno y externo.
Verifique que haya recibido las siguientes piezas:
1 Manual de Instrucciones
1 Paleta para cubo de hielo
Antes de conectar la máquina de hacer hielo a la corriente eléctrica, colóquela parada en posición
vertical por 2 horas aproximadamente. Esto reducirá la posibilidad de mal funcionamiento en el
sistema de enfriado, causado por el manejo y manipuleo durante el transporte.
Limpie la superficie interior con agua tibia, usando un trapito suave.
Instalación de su máquina de hacer hielo
Coloque la máquina de hacer hielo fuera de la luz solar directa y de fuentes de calor (cocina,
calentador, radiador, etc.). La luz solar directa puede afectar la capa acrílica y las fuentes de calor
puede incrementar el consumo eléctrico. Las temperaturas de ambiente extremadamente altas
también podrían ocasionar que su máquina de hacer hielo no funcione correctamente.
Conecte la máquina de hacer hielo a un receptáculo/enchufe de pared correctamente instalado, de
uso exclusivo para esta. Bajo ninguna circunstancia corte o retire la tercera punta (cable a tierra)
del cordón. Cualquier consulta que tenga referente a la electricidad y/o cable a tierra, debe ser
dirigida a un electricista certificado o a un centro de servicios autorizado por Avanti Products.
IMPORTANTE: No instale la Máquina de hacer hielo cerca de un horno, radiador u otras
fuentes de calor.
13
Conexión Eléctrica
Para su seguridad, esta máquina de hacer hielo debe estar apropiadamente conectada a tierra. El
cordón eléctrico de esta máquina de hacer hielo está equipado con un enchufe de tres puntas, el
cual encaja perfectamente en los receptáculos/enchufes de pared de tres puntas estándar, para
minimizar la posibilidad de un choque eléctrico.
Bajo ninguna circunstancia corte o retire la tercera punta (cable a tierra) del enchufe del cordón
eléctrico.
Nunca use un cable de extensión para conectar la unidad a la electricidad.
Nunca use un adaptador con enchufe de solo 2 puntas.
Si solo puede conectar la máquina de hacer hielo a un receptáculo/enchufe de pared de 2 puntas,
comuníquese con un electricista calificado para que reemplace ese receptáculo/enchufe de pared
por uno de 3 puntas, de acuerdo con los códigos de electricidad aplicables.
Esta máquina de hacer hielo requiere un receptáculo/enchufe de pared de tres puntas estándar de
115/120 voltios a.c.~/60hz.
Para prevenir cualquier daño físico o lesión, el cordón debe ser asegurado detrás de la máquina de
hacer hielo y no estar expuesto o colgando.
Cable de Extensión
Debido al posible riesgo de seguridad causado bajo ciertas circunstancias, se recomienda firmemente
que no use un cable de extensión para este electrodoméstico. Sin embargo, si no tiene otra opción
mas que usar un cable de extensión, asegúrese que este sea un cable de extensión para
electrodomésticos que este listado bajo UL/CUL, que tenga enchufe y receptáculo para enchufe de tres
puntas (cable a tierra) y que la capacidad del cordón eléctrico sea de 115 voltios y no menos de 10
amperios.
Protector contra variaciones de corriente eléctrica (Surge Protector).
La mayoría de electrodomésticos utilizan una series de paneles de control para operar. Estos paneles
son muy susceptibles a las variaciones de corriente eléctrica, las cuales causan que estos se dañen o
destruyen.
Si vive en un área o ciudad done hay muchas variaciones de corriente o apagones, se recomienda que
utilice un protector contra variaciones de corriente para todos los electrodomésticos y aparatos
eléctricos. El protector que elija debe bloquear una variación de electricidad alta para poder proteger el
electrodoméstico al cual está conectado. Por favor contáctese con un electricista licenciado en su área
si tuviera preguntas en referencia al tipo y tamaño de protector que necesita.
Daños debido a variaciones de electricidad no se consideran un defecto del fabricante y podrían anular
la garantía.
ADVERTENCIA
EL USO INAPROPIADO DEL ENCHUFE A TIERRA PUEDE OCASIONAR RIESGO DE UN
CHOQUE ELECTRICO. SI EL CORDON SE DAÑASE, LLEVELO A UN CENTRO DE SERVICIO
AUTORIZADO POR AVANTI PRODUCTS PARA QUE SE REEMPLACE.
14
OPERANDO SU MÁQUINA DE HACER HIELO
Descripción del Panel de Control
ON / OFF (Encender / Apagar)
Presione para encender o apagar la unidad.
INDICADORES DE PANTALLA
INDICADOR PARA ADIR AGUA (ROJO).
La máquina de hacer hielo automáticamente verifica el nivel de agua en el tanque. Si el nivel de
agua en el tanque fuera muy bajo, el indicador para añadir agua se iluminará en ROJO y el
indicador iluminará intermitentemente en VERDE y detendrá el funcionamiento. Una vez que
haya añadido el agua y oprime el botón marcado “ON/OFF” el indicador rojo apagará, el indicador
se apagará y empezará a funcionar normalmente.
INDICADOR DEL RECIPIENTE LLENO DE HIELO (ROJO).
Cuando el recipiente de hielo esté lleno, el indicador se iluminará ROJO. El indicador se
mantendrá iluminado hasta que el hielo en el recipiente se derrita lentamente o se remueva.
La unidad se mantendrá en modo de espera (Standby) hasta que el hielo haya sido removido /
derretido, entonces la unidad empezará a funcionar normalmente.
Instrucciones de Operación
Iniciando el proceso con su máquina de hacer hielo
Levante la tapa de la unidad.
Remueva el polvo o cualquier objeto que esté en el
tanque de agua.
Llena el tanque de agua hasta el área marcada “MAX”.
La máquina de hacer hielo automáticamente verifica el
nivel de agua en el tanque. Si el nivel de agua en el
tanque fuera muy bajo, el indicador para añadir agua
(ADD WATER) se iluminará en ROJO y detendrá el
funcionamiento.
Llene el tanque de agua y presione el botón ON/OFF. El
indicador rojo apagará, el indicador se apagará y empezará a funcionar normalmente.
Cuando los cubos de hielo se van almacenando y llegan al tope del sensor, la máquina de
hacer hielo detendrá el funcionamiento y el indicador de ICE FULL (CICLO COMPLETO) se
encenderá.
Para mejor funcionamiento, la temperatura del agua debe estar entre 7°C (45ºF) y 35°C (95ºF)
y la del ambiente entre 15°C (59ºF) y 25°C (77ºF).
Sacando hielo del recipiente de hielo
Levante la tapa de la unidad.
Retire la cantidad de hielo deseada, baje la tapa a su sitio original y cierre.
15
CUIDADO Y MANTENIMIENTO
Precaución
Asegúrese de desconectar la máquina de hacer hielo de la electricidad antes de limpiarla, de lo
contrario puede ocasionar un choque eléctrico o daño personal.
Limpiando su máquina de hacer hielo
Para asegurar la higiene en los cubos de hielo, el agua del tanque debe ser reemplazada cada 24
horas.
Cuando la máquina de hacer hielo no sea usada por un largo período de tiempo, retire el tapón del
drenaje para que el agua remanente del tanque sea descartada. Coloque el tapón del drenaje
nuevamente en su sitio después que toda el agua haya sido drenada.
Siempre use agua fresca antes de empezar la producción de hielo durante la instalación inicial o
después de largos períodos de inactividad.
Por favor limpie su máquina de hacer hielo regularmente. Cuando la limpie, desconecte la unidad
de la electricidad y retire los cubos de hielo. Use una solución diluída de agua y vinagre para
limpiar el interior y el exterior de la superficie de la máquina de hacer hielo. No rocíe la máquina de
hacer hielo con substancias químicas o agentes diluídos, tales como ácidos, gasolina o aceite.
Enjuague bien antes de empezar el funcionamiento.
Requerimientos de espacio
El ángulo de inclinación de la unidad durante el transporte no debe exceder los 45°
No ponga la máquina de hacer hielo de cabeza ya que esto puede producir problemas en el
compresor y el sistema sellado.
La máquina de hacer hielo debe ser colocada sobre una superficie correctamente nivelada.
Para asegurar ventilación apropiada para su máquina de hacer hielo, deje 6” de espacio encima de
la superficie, la parte posterior y los lados.
Antes de usar la máquina de hacer hielo por primera vez, por favor espere 2 horas después de
colocarla en su posición final.
Limpie la superficie interna, el contenedor del hielo, el tanque de agua y el reservorio para rellenar
el tanque de agua con mucha frecuencia.
IMPORTANTE: No instale la máquina de hacer hielo cerca de un horno, radiador u otras
fuentes de calor.
Falta de electricidad
Cuando la electricidad se va, la mayoría de las veces esta regresa en unas pocas horas y no debe
afectar la temperatura de su máquina de hacer hielo siempre y cuando ud. minimice las veces que se
abra la puerta del contenedor del hielo. Si la electricidad va a estar desconectada por un largo período
de tiempo, entonces debe tomar los pasos apropiados y desconectar la unidad.
16
PROBLEMAS CON SU MÁQUINA DE HACER HIELO?
Ud. puede resolver muchos problemas simples de máquina de hacer hielo fácilmente, ahorrándose el
costo de una visita del servicio técnico. Pruebe las sugerencias a continuación para ver si con ellas
puede resolver el problema antes de llamar al técnico.
GUIA PARA RESOLVER PROBLEMAS
Problema
Causa Posible
Sugerencias
El compresor no funciona
normalmente, tiene un ruido.
El voltaje es menor que el
recomendado.
Apague la máquina de hacer hielo y
no la encienda hasta que el voltaje
vuelva a la normalidad.
El indicador para añadir mas
agua está encendido.
El tanque de agua no tiene
suficiente agua.
Presione el botón ON/OFF, llénelo de
agua, espere 3 minutos y luego
encienda la unidad presionando el
botón START.
El indicador de recipiente de
hielo lleno está encendido.
El recipiente de hielo está lleno
hasta el tope.
Remueva un poco de hielo.
Las luces indicadoras están
apagadas.
Se voló un fusible / la máquina
no está conectada o no hay
electricidad / voló el interruptor.
Reemplace el fusible / verifique que
la máquina está enchufada /
encienda la máquina.
Los cubos de hielo son muy
grandes y se están pegando
unos a otros.
La temperatura del agua en el
recipiente de hielo o del
ambiente es muy baja.
Apague la máquina y reprograme el
ciclo de hacer hielo. Luego de
apagar la máquina enciéndala otra
vez.
Todas la condiciones para el
ciclo de hacer hielo están
correctas pero no hay hielo.
Fuga o goteo de refrigerante /
el sistema sellado está
bloqueado.
Reemplace la unidad.
17
18
Registration Information
Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the following
address within 100 days from the date of purchase and receive these important benefits:
Avanti Products LLC
P.O.Box 520604 Miami, Florida 33152
Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to help
you refer to this information in the event of an insurance claim such as fire or theft.
Promote better products:
We value your input. Your responses will help us develop products designed to best meet your
future needs.
---------------------------------------------------(detach here)-----------------------------------------------------------------
Avanti Registration Card
Name
Model # Serial #
Address
Date Purchased Store / Dealer Name
City State Zip
E-mail Address
Area Code Phone Number
Occupation
Did You Purchase An Additional Warranty
As your Primary Residence, Do You:
Extended
Own Rent
None
Your Age:
Reason for Choosing This Avanti Product:
Please indicate the most important factors
That influenced your decision to purchase this
product:
under 18
18-25
26-30
31-35 36-50 over 50
Marital Status:
Married Single
Price
Product Features
Avanti Reputation
Product Quality
Salesperson Recommendation
Other: ___________________
Friend / Relative Recommendation
Warranty
Other: ___________________
Is This Product Used In The:
Home Business
How Did You Learn About This Product:
Advertising
In-Store Demo
Personal Demo
Comments:
19
Ver-IM12C-IS 1.0 - 04302015
PRINTED IN CHINA
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Avanti IM12CIS Manual de usuario

Categoría
Fabricantes de cubitos de hielo
Tipo
Manual de usuario

En otros idiomas