Avanti IM12CIS Manual de usuario

Marca: Avanti

Modelo: IM12CIS

Categoría: Fabricantes de cubitos de hielo

Tipo: Manual de usuario

ICE MAKER/MAQUINA DE HACER HIELO

INSTRUCTION MANUAL/MANUAL DE INSTRUCCIONES

Model Number / No. de Modelo:

IM12C-IS

BEFORE

USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING

INSTRUCTIONS.

La sección en español empieza en la página 13.

Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications

without notice.

Avanti Products LLC

P.O. Box 520604 - Miami, Florida 33152

www.avantiproducts.com

TABLE OF CONTENTS

Ice-Maker Safety

Important Safeguides

Help Us Help You

Parts and Features

Important Safety Instructions

Installation Instructions

Before Using Your Appliance

Installation of Your Appliance

Electrical Connection

Operating Your Appliance

Control Panel Description

Operating Instructions

Getting Ice from Ice-bin

Care and Maintenance

Cleaning Your Appliance

Space Requirements

Power Failure

Troubleshooting Guide

Service for Your Appliance

Your Avanti Products Warranty

Instrucciones en Español

13 - 17

Registration Information and Registration Card

ICE MAKER SAFETY

YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT.

We have provided many important safety messages in this manual for your appliance. Always read and

obey all safety messages.

This is the safety alert symbol. This symbol alerts you to

Potential hazards that can kill or injure you and others.

All safety messages will follow the safety alert symbol

And either the words” DANGER”, “WARNING” or “CAUTION”.

Danger means that failure to heed this safety

statement may result in severe personal

injury or death.

Warning means that failure to heed this

safety statement may result in extensive

product damage, serious personal injury, or

death.

Caution means that failure to heed this

safety statement may result in minor or

moderate personal injury, property or

equipment damage.

All safety messages will alert you to know what potential hazard is, tell you how to reduce the chance of

injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUIDES

Before the appliance is used, it must be properly positioned

and installed as described in this manual, so read the manual

carefully. To reduce the risk of fire, electrical shock or

injury when using the appliance, follow basic precaution,

Including the following:

• Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an

extension cord.

• It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that

cannot be turned off by a switch or pull chain.

• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do

not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

The fumes can create a fire hazard or explosion.

• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is

disconnected.

• Do not connect or disconnect the electric plug when your hands are wet.

• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical

shock or death.

• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this

manual. All other servicing should be referred to a qualified technician.

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

• Use two or more people to move and install appliance. Failure to do so can result in back or other injury.

• To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose

a well-ventilated area with temperatures above 60°f (16

c) and below 90°f (32°c). This unit must be installed in

an area protected from the element, such as wind, rain, water spray or drips.

• The appliance should not be located next to ovens, grills or other sources of high heat.

• The appliance must be installed with all electrical, water and drain connections in accordance with state and

local codes. A standard electrical supply (115 v ac only, 60 hz), properly grounded in accordance with the

national electrical code and local codes and ordinances is required.

• Do not kink or pinch the power supply cord of appliance.

• The fuse (or circuit breaker) size should be 15 amperes.

• It is important for the appliance to be leveled in order to work properly. You may need to make several

adjustments to level it.

• All installation must be in accordance with local plumbing code requirements.

• Make certain that the pipes are not pinched or kinked or damaged during installations.

• Check for leaks after connection.

• Never allow children to operate, play with or crawl inside the appliance.

• If you use the drainage container, you must set the drain select switch to off or the water can overflow from the

drainage container

• Although the unit has been tested at the factory, due to long-term transit and storage, the first batch of cubes

must be discarded.

• Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or discolor

the interior.

• Do not use this apparatus for other than its intended purpose.

Help us help you…

Read this guide carefully.

It is intended to help you operate and maintain

your new ice maker properly.

Keep it handy to answer your questions.

If you don't understand something or you need

more help, please call:

Avanti customer service

800-220-5570

Keep proof of original purchase date (such as

your sales slip) with this guide to establish the

warranty period.

Write down the model and serial numbers.

You'll find them on a plate located on the rear

wall of the ice maker.

Please write these numbers here:

____________________________________

Date of purchase

____________________________________

Model number

____________________________________

Serial number

Use these numbers in any correspondence or

service calls concerning your ice maker.

If you received a damaged ice maker,

immediately contact the dealer (or builder) that

sold you the ice maker.

Save time and money. Before you call for

service, check the troubleshooting guide. It lists

causes of minor operating problems that you

can correct yourself.

If you need service

We're proud of our service and want you to be

pleased. If for some reason you are not happy

with the service you receive, here are some

steps to follow for further assistance.

First, contact the people who serviced your ice

maker. Explain why you are not pleased. In

most cases, this will solve the problem.

Next, if you are still not pleased, write all the

details, including your telephone number, and

send it to:

Customer Service

Avanti Products

10880 NW 30

Street

Miami, Fl 33172 USA

PARTS AND FEATURES

Silicon Drain Plug

Water Tank

Compressor

Power Plug

Top Lid

Top Window

Back Cover

Control Panel

Water Tray

Evaporator

Ice Scoop

Ice Basket

IMPORTANT SAFETY INSTRUCTIONS



WARNING



To reduce the risk of fire, electrical shock, or

injury when using your ice maker, follow these

basic precautions:

• Read all instructions before using the ice maker.

• Danger or Warning: Risk of child entrapment.

• Child entrapment and suffocation are not problems of the past. Junked or abandoned

appliances are still dangerous. . . Even if they will “just sit in the garage a few days.”

• Never allow children to operate, play with, or crawl inside the appliance.

• Never clean ice maker parts with flammable fluids. The fumes can create a fire hazard or

explosion.

• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this

or any other ice maker. The fumes can create a fire hazard or explosion.

-save these instructions-

INSTALLATION INSTRUCTIONS

 Before Using Your Ice Maker

• Remove the exterior and interior packing.

• Check to be sure you have all of the following parts:

• 1 Instruction Manual

• 1 Ice Scoop

• Before connecting the ice maker to the power source, let it stand upright for approximately 2 hours.

This will reduce the possibility of a malfunction in the cooling system from handling during

transportation.

• Clean the interior surface with lukewarm water using a soft cloth.

 Installation Of Your Ice Maker

• Locate the ice maker away from direct sunlight and sources of heat (stove, heater, radiator, etc.).

Direct sunlight may affect the acrylic coating and heat sources may increase electrical

consumption. Extreme cold ambient temperatures may also cause the ice maker not to perform

properly.

• Plug the ice maker into an exclusive properly installed-grounded wall outlet. Do not under any

circumstances cut or remove the third (ground) prong from the power cord. Any questions

concerning power and or grounding should be directed toward a certified electrician or an

authorized Avanti products service center.

IMPORTANT: Do not install the Ice maker near an oven, radiator, or other heat source.

 ELECTRICAL CONNECTION

This appliance should be properly grounded for your safety. The power cord of this appliance is

equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the

possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For

personal safety, this appliance must be properly grounded.

This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly

grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to

have it replaced with a properly grounded 3-prong wall outlet.

The cord should be secured behind the appliance and not left exposed or dangling to prevent

accidental injury.

The appliance should always be plugged into its own individual electrical outlet which has a voltage

rating that matches the rating label on the appliance. This provides the best performance and also

prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug

the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the

receptacle. Repair or replace immediately all power cords that have become frayed or otherwise

damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the appliance, be careful not to damage the power cord.

 EXTENSION CORD

Because of potential safety hazards under certain conditions, it is strongly recommended that you do

not use an extension cord with this appliance. However, if you must use an extension cord it is

absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord

having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least

10 amperes.

 SURGE PROTECTOR

Most electrical appliances use a series of electric control boards to operate. These boards are very

susceptible to power surges and could be damaged or destroyed.

If the appliance is going to be used in an area or if your city / country is prone to power surges / outages;

it is suggested that you use a power surge protector for all electrical devices / appliances you use. The

surge protector that you select must have a surge block high enough to protect the appliance it is

connected to. If you have any questions regarding the type and size of surge protector needed contact

a licensed electrician in your area.

Damages due to power surges are not considered a manufacturer covered defect and will void your

product warranty.

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is

damaged, have it replaced by an authorized Avanti Products service center.

OPERATING YOUR ICE MAKER

 Control Panel Description

LED INDICATORS

POWER INDICATOR

The indicator above the word ICE will flash when the unit is plugged in.

It will lit green when the unit is turned on.

ADD WATER INDICATOR

The ice maker automatically checks the

water level in the tank. If the water level

is too low, the indicator will illuminate in

RED and will stop working automatically.

The ‘ICE’ indicator will flash.Once you

add water to the unit and push the

ON/OFF button the indicator will turn off

and will resume normal operation.

ICE FULL INDICATOR

When the ice-bin is full, the indicator will illuminate in RED. The indicator will remain lit until the ice

in the bin either melts away slowly or has been removed. The unit will stay in a “Standby” mode

until the ice has been removed / melted at which time the unit will automatically start operation as

normal.

Operating Instructions

Starting your Ice maker

• Open the top cover and remove the ice basket.

• Remove any dust or objects that may be in the water tank

• Fill the water tank up to the area marked “MAX”.

• The ice-maker will automatically check the water level in the

reservoir periodically. The ice maker will detect any shortage

of water and will stop the ice-making cycle, then the ADD

WATER indicator will be lit.

• Fill the reservoir with water and press the ON/OFF button to

restart the ice-making cycle and the ADD WATER indicator

goes out as the ice-maker will begin it’s normal operation cycle automatically.

• When the ice cubes are collected and reach the bin sensor, the ice maker will stop

operating and the ICE FULL indicator will be lit.

• WARNING:

Direct sunlight may affect the infrared sensors and cause the unit to malfunction.

If at any time the unit does not stop the ice-making operation even when the ice-bin is full, move the

unit to another location where it is out of direct sunlight.

• For best performance, water temperature should be between 7°C (45ºF) and 35°C (95ºF)

and ambient between 15°C (59ºF) and 25°C (77ºF).

Getting Ice from the Ice-bin

• Open the top cover to access the ice basket.

• Remove the amount of ice as desired and close the top.

CARE AND MAINTENANCE

Caution

Failure to unplug the ice maker could result in electrical shock or personal injury.

 Cleaning Your Ice Maker

• To ensure the cleanliness of the ice cubes, water in the reservoir should be replaced every 24

hours.

• Remove the drain plug to drain remaining water from the water reservoir when the ice maker will not

be used for long period of time. Screw the drain plug back in place after the water has been drained.

• Always change with fresh water before starting ice production at initial installation or after long

shut-off periods.

• Please clean your Ice maker regularly. When cleaning, unplug the unit and remove the ice cubes.

Use a diluted solution of water and vinegar to clean the inside and the outside surface of the Ice

maker. Do not spray Ice maker with chemicals or diluted agents such as acids, gasoline or oil.

Rinse thoroughly before starting.

 Space Requirements

• During transportation, the incline angle of the cabinet should not be over 45°

• Do not turn the Ice maker upside down. Problems could occur in the compressor and sealed

system.

• The Ice maker should be placed horizontally on a properly leveled surface.

• To ensure proper ventilation for your Ice maker allow 6” of space at the top, the back and on each

side.

• Before using the Ice maker for the first time, please wait 2 hours after positioning it.

• Clean the inner liner, ice-bin, water box, water cup frequently.

IMPORTANT: Do not install the Ice maker near an oven, radiator, or other heat source.

 Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your ice

maker if you minimize the number of times the ice-bin is opened. If the power is going to be OFF for a

longer period of time, you need to take the proper steps to disconnect your appliance.

PROBLEMS WITH YOUR ICE MAKER?

You can solve many common ice maker problems easily, saving you the cost of a possible service call.

Try the suggestions below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

Problem

Possible Cause

Suggested Solutions

The compressor works

abnormally with a buzzing

Noise.

The voltage is lower than

recommended.

Stop the ice maker and do not restart

until the voltage is normal.

Water shortage indicator

Light is on.

There is not enough water in

the reservoir.

Press the ON/OFF button, fill with water,

wait 3 minutes and press the power

button again to restart.

Ice full indicator light is on.

Ice storage cabinet is full to

the top.

Remove some of the ice.

Indicator lights are off.

Blown fuse/ no power/blown

breaker

Replace fuse / turn power on.

The ice made is too large

and with pieces sticking

together.

The water temperature in the

storage tray or ambient is too

low.

Stop the machine and reset the ice

making cycle. Restart the machine after

turning it off.

Conditions for ice making

cycle are right but no ice is

made.

Refrigerant leaks/ sealed

system is blocked.

Replace unit.

Service For Your Ice Maker

We are proud of our customer service organization and the network of professional service technicians

that provide service on your Avanti ice maker. With the purchase of your Avanti ice maker, you can be

confident that if you ever need additional information or assistance, the Avanti Products Customer

Service team will be here for you. Just call us toll-free.

Avanti Products Customer Services

Product information

800-323-5029

Whatever your questions are about our products,

help is available.

Part orders

800-220-5570

You may order parts and accessories that will be

delivered directly to your home, by personal

check, money order, master card, or visa.

In-home repair service

800-220-5570

An Avanti Products authorized service center will

provide expert repair service, scheduled at a time

that is convenient for you. Our trained servicers

know your ice maker inside and out.

YOUR AVANTI PRODUCTS

WARRANTY

Staple your sales receipt here. Proof of original

purchase date is needed to obtain service under

warranty.

WHAT IS COVERED – LIMITED ONE-YEAR WARRANTY

Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of

twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon the

date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless

described in detail in the warranty document. For one year from the date of purchase by the original owner, Avanti

products will, at its option, repair or replace any part of the product which proves to be defective in material or

workmanship under normal use. Avanti Products will provide you with a reasonably similar product that is either

new or factory refurbished. During this period Avanti Products will provide all parts and labor necessary to correct

such defects free of charge, so long as the product has been installed and operated in accordance with the written

instructions in this manual. In rental or commercial use, the warranty period is 90 days. All Avanti appliances of 3.5

cubic feet capacity or less must be brought/sent to the appliance service center for repair.

LIMITED SECOND THROUGH FIFTH YEAR WARRANTY

For the second through the fifth year from the date of original purchase, Avanti Products will provide a replacement

compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental

or commercial use, the limited compressor warranty is one year and nine months. Costs involved to move the

product to the service center and back to the user’s home, as maybe required, are the user’s responsibility.

WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:

The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti

Products, including without limitation, one or more of the following:

•

A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes,

regulations, or laws, including failure to install the product in strict conformity with local fire and building codes

and regulations.

• Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand,

floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity, lightning,

power surges, structural failures surrounding the appliance, and acts of God.

•

Content losses of food or other content due to

spoilage.

• Incidental or consequential damages

• Parts and labor costs for the following will not be

considered as warranty:

• Evaporator doors, door springs, and/or frames.

• Inner door panels, door shelves, door rails, and/or

door supports.

• Light bulbs and/or plastic housing.

• Plastic cabinet liners.

• Punctured evaporator that voids the warranty on

the complete sealed system.

• Shipping and handling costs associated with the

replacement of the unit.

• Repairs performed by unauthorized servicers.

• Service calls that are related to external problems,

such as abuse, misuse, inadequate electrical power,

accidents, fire, floods, or any other acts of God.

• Failure of the product if it is used for other than it

intended purpose.

• The warranty does not apply outside the Continental

USA.

• Surcharges including but not limited to, any after

hour, weekend, or holiday service calls, tolls, ferry

trip charges, or mileage expense for service calls to

remote areas.

In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding property,

including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also excluded from this

warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces and exposed parts;

Products on which the serial numbers have been altered, defaced or removed; service visits for customer

education, or visits where there is nothing wrong with the product; correction of installation problems (you are solely

responsible for any structure and setting for the product, including all electrical, plumbing and/or other connecting

facilities, for proper foundation/flooring, and for any alterations including without limitation cabinetry, walls, floors,

shelving etc., as well as the resetting of breakers or fuses.

OUT OF WARRANTY PRODUCT

Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including repairs,

pro-rates, or product replacement, once this warranty has expired.

WARRANTY – REFRIGERATION - COMPRESSOR

MEDIDAS DE PRECAUCION IMPORTANTES



ADVERTENCIA



Para reducir el riesgo de un incendio, choque

eléctrico o daños personales cuando use la

máquina de hacer hielo, siga estas

precauciones básicas.

• Lea todas las instrucciones antes de usar la máquina de hacer hielo.

• Peligro o Advertencia: riesgo de niños atrapados.

• Los niños atrapados o sofocados no so un problema del pasado. Electrodomésticos

abandonados aun son peligrosos…aun cuando “solo estarán en el garaje un par de días”.

• Antes de botar su máquina de hacer hielo: Retire la bandeja de hielo.

• Nunca permita que los niños operen, jueguen con o se introduzcan en la máquina.

• Nunca limpie la máquina de hacer hielo o las piezas con líquidos inflamables. Los vapores

pueden causar peligro de fuego o explosión.

• No guarde ni use gasolina u otros vapores o líquidos inflamables cerca a este u otra

máquina de hacer hielo. Los vapores pueden causar peligro de fuego o explosión.

•

-guarde estas instrucciones -

INSTRUCCIONES DE INSTALACION

 Antes de usar su Máquina de Hacer Hielo

• Retire el empaque interno y externo.

• Verifique que haya recibido las siguientes piezas:

• 1 Manual de Instrucciones

• 1 Paleta para cubo de hielo

• Antes de conectar la máquina de hacer hielo a la corriente eléctrica, colóquela parada en posición

vertical por 2 horas aproximadamente. Esto reducirá la posibilidad de mal funcionamiento en el

sistema de enfriado, causado por el manejo y manipuleo durante el transporte.

• Limpie la superficie interior con agua tibia, usando un trapito suave.

 Instalación de su máquina de hacer hielo

• Coloque la máquina de hacer hielo fuera de la luz solar directa y de fuentes de calor (cocina,

calentador, radiador, etc.). La luz solar directa puede afectar la capa acrílica y las fuentes de calor

puede incrementar el consumo eléctrico. Las temperaturas de ambiente extremadamente altas

también podrían ocasionar que su máquina de hacer hielo no funcione correctamente.

• Conecte la máquina de hacer hielo a un receptáculo/enchufe de pared correctamente instalado, de

uso exclusivo para esta. Bajo ninguna circunstancia corte o retire la tercera punta (cable a tierra)

del cordón. Cualquier consulta que tenga referente a la electricidad y/o cable a tierra, debe ser

dirigida a un electricista certificado o a un centro de servicios autorizado por Avanti Products.

IMPORTANTE: No instale la Máquina de hacer hielo cerca de un horno, radiador u otras

fuentes de calor.

 Conexión Eléctrica

• Para su seguridad, esta máquina de hacer hielo debe estar apropiadamente conectada a tierra. El

cordón eléctrico de esta máquina de hacer hielo está equipado con un enchufe de tres puntas, el

cual encaja perfectamente en los receptáculos/enchufes de pared de tres puntas estándar, para

minimizar la posibilidad de un choque eléctrico.

• Bajo ninguna circunstancia corte o retire la tercera punta (cable a tierra) del enchufe del cordón

eléctrico.

• Nunca use un cable de extensión para conectar la unidad a la electricidad.

• Nunca use un adaptador con enchufe de solo 2 puntas.

• Si solo puede conectar la máquina de hacer hielo a un receptáculo/enchufe de pared de 2 puntas,

comuníquese con un electricista calificado para que reemplace ese receptáculo/enchufe de pared

por uno de 3 puntas, de acuerdo con los códigos de electricidad aplicables.

• Esta máquina de hacer hielo requiere un receptáculo/enchufe de pared de tres puntas estándar de

115/120 voltios a.c.~/60hz.

• Para prevenir cualquier daño físico o lesión, el cordón debe ser asegurado detrás de la máquina de

hacer hielo y no estar expuesto o colgando.

 Cable de Extensión

Debido al posible riesgo de seguridad causado bajo ciertas circunstancias, se recomienda firmemente

que no use un cable de extensión para este electrodoméstico. Sin embargo, si no tiene otra opción

mas que usar un cable de extensión, asegúrese que este sea un cable de extensión para

electrodomésticos que este listado bajo UL/CUL, que tenga enchufe y receptáculo para enchufe de tres

puntas (cable a tierra) y que la capacidad del cordón eléctrico sea de 115 voltios y no menos de 10

amperios.

 Protector contra variaciones de corriente eléctrica (Surge Protector).

La mayoría de electrodomésticos utilizan una series de paneles de control para operar. Estos paneles

son muy susceptibles a las variaciones de corriente eléctrica, las cuales causan que estos se dañen o

destruyen.

Si vive en un área o ciudad done hay muchas variaciones de corriente o apagones, se recomienda que

utilice un protector contra variaciones de corriente para todos los electrodomésticos y aparatos

eléctricos. El protector que elija debe bloquear una variación de electricidad alta para poder proteger el

electrodoméstico al cual está conectado. Por favor contáctese con un electricista licenciado en su área

si tuviera preguntas en referencia al tipo y tamaño de protector que necesita.

Daños debido a variaciones de electricidad no se consideran un defecto del fabricante y podrían anular

la garantía.

ADVERTENCIA

EL USO INAPROPIADO DEL ENCHUFE A TIERRA PUEDE OCASIONAR RIESGO DE UN

CHOQUE ELECTRICO. SI EL CORDON SE DAÑASE, LLEVELO A UN CENTRO DE SERVICIO

AUTORIZADO POR AVANTI PRODUCTS PARA QUE SE REEMPLACE.

OPERANDO SU MÁQUINA DE HACER HIELO

 Descripción del Panel de Control

ON / OFF (Encender / Apagar)

Presione para encender o apagar la unidad.

INDICADORES DE PANTALLA

INDICADOR PARA AÑADIR AGUA (ROJO).

La máquina de hacer hielo automáticamente verifica el nivel de agua en el tanque. Si el nivel de

agua en el tanque fuera muy bajo, el indicador para añadir agua se iluminará en ROJO y el

indicador iluminará intermitentemente en VERDE y detendrá el funcionamiento. Una vez que

haya añadido el agua y oprime el botón marcado “ON/OFF” el indicador rojo apagará, el indicador

se apagará y empezará a funcionar normalmente.

INDICADOR DEL RECIPIENTE LLENO DE HIELO (ROJO).

Cuando el recipiente de hielo esté lleno, el indicador se iluminará ROJO. El indicador se

mantendrá iluminado hasta que el hielo en el recipiente se derrita lentamente o se remueva.

La unidad se mantendrá en modo de espera (Standby) hasta que el hielo haya sido removido /

derretido, entonces la unidad empezará a funcionar normalmente.

Instrucciones de Operación

Iniciando el proceso con su máquina de hacer hielo

• Levante la tapa de la unidad.

• Remueva el polvo o cualquier objeto que esté en el

tanque de agua.

• Llena el tanque de agua hasta el área marcada “MAX”.

• La máquina de hacer hielo automáticamente verifica el

nivel de agua en el tanque. Si el nivel de agua en el

tanque fuera muy bajo, el indicador para añadir agua

(ADD WATER) se iluminará en ROJO y detendrá el

funcionamiento.

• Llene el tanque de agua y presione el botón ON/OFF. El

indicador rojo apagará, el indicador se apagará y empezará a funcionar normalmente.

• Cuando los cubos de hielo se van almacenando y llegan al tope del sensor, la máquina de

hacer hielo detendrá el funcionamiento y el indicador de ICE FULL (CICLO COMPLETO) se

encenderá.

• Para mejor funcionamiento, la temperatura del agua debe estar entre 7°C (45ºF) y 35°C (95ºF)

y la del ambiente entre 15°C (59ºF) y 25°C (77ºF).

Sacando hielo del recipiente de hielo

• Levante la tapa de la unidad.

• Retire la cantidad de hielo deseada, baje la tapa a su sitio original y cierre.

CUIDADO Y MANTENIMIENTO

Precaución

Asegúrese de desconectar la máquina de hacer hielo de la electricidad antes de limpiarla, de lo

contrario puede ocasionar un choque eléctrico o daño personal.

 Limpiando su máquina de hacer hielo

• Para asegurar la higiene en los cubos de hielo, el agua del tanque debe ser reemplazada cada 24

horas.

• Cuando la máquina de hacer hielo no sea usada por un largo período de tiempo, retire el tapón del

drenaje para que el agua remanente del tanque sea descartada. Coloque el tapón del drenaje

nuevamente en su sitio después que toda el agua haya sido drenada.

• Siempre use agua fresca antes de empezar la producción de hielo durante la instalación inicial o

después de largos períodos de inactividad.

• Por favor limpie su máquina de hacer hielo regularmente. Cuando la limpie, desconecte la unidad

de la electricidad y retire los cubos de hielo. Use una solución diluída de agua y vinagre para

limpiar el interior y el exterior de la superficie de la máquina de hacer hielo. No rocíe la máquina de

hacer hielo con substancias químicas o agentes diluídos, tales como ácidos, gasolina o aceite.

Enjuague bien antes de empezar el funcionamiento.

 Requerimientos de espacio

• El ángulo de inclinación de la unidad durante el transporte no debe exceder los 45°

• No ponga la máquina de hacer hielo de cabeza ya que esto puede producir problemas en el

compresor y el sistema sellado.

• La máquina de hacer hielo debe ser colocada sobre una superficie correctamente nivelada.

• Para asegurar ventilación apropiada para su máquina de hacer hielo, deje 6” de espacio encima de

la superficie, la parte posterior y los lados.

• Antes de usar la máquina de hacer hielo por primera vez, por favor espere 2 horas después de

colocarla en su posición final.

• Limpie la superficie interna, el contenedor del hielo, el tanque de agua y el reservorio para rellenar

el tanque de agua con mucha frecuencia.

IMPORTANTE: No instale la máquina de hacer hielo cerca de un horno, radiador u otras

fuentes de calor.

 Falta de electricidad

Cuando la electricidad se va, la mayoría de las veces esta regresa en unas pocas horas y no debe

afectar la temperatura de su máquina de hacer hielo siempre y cuando ud. minimice las veces que se

abra la puerta del contenedor del hielo. Si la electricidad va a estar desconectada por un largo período

de tiempo, entonces debe tomar los pasos apropiados y desconectar la unidad.

PROBLEMAS CON SU MÁQUINA DE HACER HIELO?

Ud. puede resolver muchos problemas simples de máquina de hacer hielo fácilmente, ahorrándose el

costo de una visita del servicio técnico. Pruebe las sugerencias a continuación para ver si con ellas

puede resolver el problema antes de llamar al técnico.

GUIA PARA RESOLVER PROBLEMAS

Problema

Causa Posible

Sugerencias

El compresor no funciona

normalmente, tiene un ruido.

El voltaje es menor que el

recomendado.

Apague la máquina de hacer hielo y

no la encienda hasta que el voltaje

vuelva a la normalidad.

El indicador para añadir mas

agua está encendido.

El tanque de agua no tiene

suficiente agua.

Presione el botón ON/OFF, llénelo de

agua, espere 3 minutos y luego

encienda la unidad presionando el

botón START.

El indicador de recipiente de

hielo lleno está encendido.

El recipiente de hielo está lleno

hasta el tope.

Remueva un poco de hielo.

Las luces indicadoras están

apagadas.

Se voló un fusible / la máquina

no está conectada o no hay

electricidad / voló el interruptor.

Reemplace el fusible / verifique que

la máquina está enchufada /

encienda la máquina.

Los cubos de hielo son muy

grandes y se están pegando

unos a otros.

La temperatura del agua en el

recipiente de hielo o del

ambiente es muy baja.

Apague la máquina y reprograme el

ciclo de hacer hielo. Luego de

apagar la máquina enciéndala otra

vez.

Todas la condiciones para el

ciclo de hacer hielo están

correctas pero no hay hielo.

Fuga o goteo de refrigerante /

el sistema sellado está

bloqueado.

Reemplace la unidad.

Registration Information

Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the following

address within 100 days from the date of purchase and receive these important benefits:

Avanti Products LLC

P.O.Box 520604 – Miami, Florida 33152

 Protect your product:

We will keep the model number and date of purchase of your new Avanti product on file to help

you refer to this information in the event of an insurance claim such as fire or theft.

 Promote better products:

We value your input. Your responses will help us develop products designed to best meet your

future needs.

---------------------------------------------------(detach here)-----------------------------------------------------------------

Avanti Registration Card

Name

Model # Serial #

Address

Date Purchased Store / Dealer Name

City State Zip

E-mail Address

Area Code Phone Number

Occupation

Did You Purchase An Additional Warranty

As your Primary Residence, Do You:

 Extended

 Own  Rent

 None

Your Age:

Reason for Choosing This Avanti Product:

Please indicate the most important factors

That influenced your decision to purchase this

product:



under 18



18-25



26-30

 31-35  36-50  over 50

Marital Status:

 Married  Single



Price

 Product Features

 Avanti Reputation

 Product Quality

 Salesperson Recommendation

 Other: ___________________

 Friend / Relative Recommendation

 Warranty

 Other: ___________________

Is This Product Used In The:

 Home  Business

How Did You Learn About This Product:

 Advertising

 In-Store Demo

 Personal Demo

Comments:

Ver-IM12C-IS – 1.0 - 04302015

PRINTED IN CHINA

Avanti IM12CIS Manual de usuario

Marca: Avanti

Modelo: IM12CIS

Categoría: Fabricantes de cubitos de hielo

Tipo: Manual de usuario

Descargar PDF

informe

En otros idiomas

English: Avanti IM12CIS User manual

Documentos relacionados

Otros documentos

BLACK DECKER BIMH326S Manual de usuario