Yamaha RX-V371 El manual del propietario

Marca: Yamaha

Modelo: RX-V371

Categoría: Receptores AV

Tipo: El manual del propietario

Owner’s Manual

AV Receiver English for Asia*, Africa, Oceania and

Latin America

*Except for China

En 2

CONTENTS

INTRODUCTION

Features and capabilities ...................................................3

About this manual............................................................. 4

Supplied accessories......................................................... 4

Part names and functions.................................................. 5

Front panel........................................................................5

Rear panel.........................................................................6

Front panel display ........................................................... 7

Remote control .................................................................8

CONNECTIONS

Connecting speakers ..........................................................9

Speaker channels and functions........................................ 9

Speaker layout ................................................................ 10

Connecting speakers.......................................................10

Connecting external devices............................................ 12

Cable plugs and jacks .....................................................12

Connecting a TV monitor...............................................13

Connecting BD/DVD players and other devices............15

Connecting video cameras and portable audio players .. 19

Transmitting input A/V to external devices.................... 19

Connecting the FM/AM antennas ..................................20

Set up the speaker parameters automatically

(YPAO) .............................................................................. 21

PLAYBACK

Basic playback procedure ...............................................25

Adjusting high/low-frequency sound (Tone control) ..... 25

Changing input settings with a single key

(SCENE function) ............................................................26

Registering input sources/sound field program .............. 26

Enjoying sound field programs....................................... 26

Selecting sound field programs and sound decoders...... 26

Sound field programs .....................................................28

FM/AM tuning ................................................................. 30

Selecting a frequency for reception (Normal tuning)..... 30

Registering and recalling a frequency (Preset tuning) ... 31

Clearing preset stations .................................................. 33

Playing back tunes from your iPod™/iPhone™ ........... 35

Connecting the Yamaha iPod universal dock................. 35

Controlling an iPod/iPhone ............................................ 35

Playing back tunes from Bluetooth™ components....... 37

Connecting a Yamaha Bluetooth wireless

audio receiver ................................................................. 37

Pairing Bluetooth™ components ................................... 37

Using Bluetooth™ components ..................................... 38

SETUP

Configuring the settings specific for each input source

(Option menu) .................................................................. 39

Option menu display and setup ...................................... 39

Option menu items ......................................................... 39

Setting various functions (Setup menu)......................... 42

Setup menu display and settings .................................... 42

Setup menu items ........................................................... 42

Manages settings for speakers........................................ 43

Setting the audio output function of this unit................. 46

Setting HDMI functions ................................................. 47

Making the receiver easier to use ................................... 49

Setting sound field program parameters......................... 50

Prohibiting setting changes ............................................ 50

Setting sound field program parameters ....................... 51

Setting sound field parameters ....................................... 51

Controlling other components with the

remote control .................................................................. 53

Keys connecting external components ........................... 53

Default remote control code settings.............................. 53

Registering remote control codes for external component

operations ....................................................................... 54

Resetting all remote control codes ................................. 55

Extended functionality that can be configured

as needed (Advanced Setup menu) ................................ 56

Displaying/Setting the Advanced Setup menu............... 56

Avoiding crossing remote control signals when using

multiple Yamaha receivers ............................................. 57

Changing FM/AM frequency steps (Asia and General

models only)................................................................... 57

Initializing various settings for this unit ........................ 57

Using the HDMI Control function ................................. 58

APPENDIX

Troubleshooting ............................................................... 61

General........................................................................... 61

HDMI™ ......................................................................... 64

Tuner (FM/AM) ............................................................. 64

Remote control............................................................... 65

iPod™/iPhone™ ............................................................ 66

Bluetooth™.................................................................... 66

Glossary............................................................................ 67

Audio information.......................................................... 67

Sound field program information................................... 68

Video information .......................................................... 68

Information on HDMI™................................................. 69

About trademarks ........................................................... 69

Specifications.................................................................... 70

Index ................................................................................. 71

En 3

INTRODUCTION

■ Built-in high-quality, high-power 5-channel amplifier

■ 1-button input/sound field program switching (SCENE function) .......................26

■ Speaker connections for 2- to 5.1-channel configurations

– Speaker channels and functions .................................................................................................................9

– Speaker layout..........................................................................................................................................10

– Speaker cable connection.........................................................................................................................10

– Subwoofer cable connection ....................................................................................................................11

■ Acoustic parameter adjustment to match your speakers and listening

environment

– Automatic settings for speaker acoustic parameters

(YPAO - Yamaha Parametric room Acoustic Optimizer) ........................................................................21

– Specifying the settings for each speaker ..................................................................................................43

– Volume control for each speaker..............................................................................................................44

– Speaker distance settings .........................................................................................................................44

– Sound quality control with the equalizer <Graphic Equalizer> ..............................................................45

– Test tone speaker adjustment ...................................................................................................................45

– Bass and treble level adjustment <Tone Control> ...................................................................................25

■ External device connection and playback

– Cables and input/output jacks for this unit ..............................................................................................12

– TV connection..........................................................................................................................................13

– TV audio playback through this receiver.................................................................................................14

– Connections for BD/DVD players (recorders) and other devices............................................................15

– Audio signal output to the TV connected via the HDMI jack .................................................................48

– Correction of lag between audio and video signals <Lipsync>...............................................................46

– External audio and video recorder connections .......................................................................................19

– HDMI/AV video input combining other audio input...............................................................................40

– Front panel external device connections (for video cameras, portable music players, etc.)....................19

– Protective cover for front panel jacks ........................................................................................................4

– Changing the input source names <Input Rename> ................................................................................49

– Configuring the settings specific for each input source <Option menu> ................................................39

– Playback from external devices ...............................................................................................................25

– Playback from an iPod/iPhone (iPod/iPhone and components sold separately) .....................................35

– Playback from a Bluetooth component (Bluetooth and components sold separately) ............................37

■ FM/AM Tuner

– FM/AM broadcast listening .....................................................................................................................30

– Simple preset tuning ................................................................................................................................31

– Changing FM/AM frequency steps initializing various settings for this unit..........................................30

■ Multi-channel, multi-format playback

– Sound field effect selection......................................................................................................................26

– Playback without sound field effects .......................................................................................................27

– Stereo playback........................................................................................................................................27

– Sound field effect configuration ..............................................................................................................51

– Compressed-music playback ...................................................................................................................26

■ Front panel information display

– Front panel display information switching ................................................................................................7

– Front panel display brightness adjustment <Dimmer>............................................................................50

– Digital video/audio signal information display <Signal Info> ................................................................40

■ Volume/sound quality adjustment functions

– Easy listening at low volumes <Adaptive DRC> ....................................................................................46

– Maximum volume settings.......................................................................................................................47

– Startup volume settings............................................................................................................................47

– Adjusting volume between input sources <Volume Trim> .....................................................................40

■ Remote control operation

– Remote control names and functions.........................................................................................................8

– Insert batteries into the remote control ......................................................................................................4

– External device operation with this unit’s remote control .......................................................................53

– Multiple Yamaha receiver operation without signal interference <Remote ID Switching>....................57

■ Other features

– Standby mode after prolonged non-operation <Auto Power Down function>........................................50

– Standby mode after a specific amount of time <Sleep timer>...................................................................8

– To charge the iPod/iPhone when this unit is in standby mode <iPod Standby Charge> .........................36

– Initializing various settings for this unit ..................................................................................................57

– Prohibiting setting changes <Memory Guard>........................................................................................50

Features and capabilities

En 4

INTRODUCTION

Features and capabilities

About this manual

Supplied accessories

Check that you received all of the following parts.

• Remote control

• Batteries (AAA, R03, UM-4) x 2

• YPAO microphone

• AM loop antenna

• Indoor FM antenna

• VIDEO AUX input cover

• This manual is printed prior to production. Design and

specifications are subject to change in part as a result of

improvements, etc. In case of differences between the manual and

product, the product has priority.

• “

dHDMI1” (example) indicates the name of the parts on the

remote control. Refer to the “Remote control” (☞

p. 8) for the

information about each position of the parts.

• J

1 indicates that the reference is in the footnote. Refer to the

corresponding numbers on the bottom of the page.

• ☞

indicates the page describing the related information.

• Click on the “ ” at the bottom of the page to display the

corresponding page in “Part names and functions.”

Front panel

Rear panel

Front panel display

Remote control

■ Attaching the VIDEO AUX input cover (included)

To protect against dust, attach the supplied VIDEO AUX input

cover to the VIDEO AUX jacks when you do not use the jacks.

To remove the cover, push the left section of it.

Attach the cover

PUSH

Remove the cover

■ Installing batteries in the remote control

When inserting batteries in the remote control, remove the

battery compartment cover from the reverse side of the remote

control, and insert two AAA batteries into the battery

compartment so that they match with the polarity markings (+

and -).

Replace the batteries with new ones if the following symptoms

become evident:

• The remote control can only be operated within a narrow range.

•

bTRANSMIT does not light up, or only lights dimly.

NOTE

If there are remote control codes for external components

registered to the remote control, removing the batteries for more

than two minutes, or leaving exhausted batteries in the remote

control, the remote control codes may be cleared. If this should

occur, replace the batteries with new ones, and set the remote

control codes.

Battery compartment

cover

Battery compartment

En 5

INTRODUCTION

Front panel

a A (Power)

Switches this unit between on and standby modes.

b YPAO MIC jack

Connect the supplied YPAO microphone and adjust the speaker

balance automatically (☞

p. 21).

c INFO

Changes the information shown on the front panel display (☞

p. 7).

d MEMORY

Registers FM/AM stations as preset stations (☞

p. 32). J1

e PRESET j / i

Selects an FM/AM preset station (☞

p. 33). J1

f FM

Sets the FM/AM tuner band to FM (☞

p. 30). J1

g AM

Sets the FM/AM tuner band to AM (☞

p. 30). J1

h TUNING jj / ii

Changes FM/AM tuner frequencies (☞

p. 30). J1

i Front panel display

Displays information on this unit (☞

p. 7).

j PHONES jack

For plugging headphones in. Sound effects applied during playback

can also be heard through the headphones.

k INPUT l / h

Selects an input source from which to playback. Press either the left or

right key repeatedly to cycle through the input sources in order.

l SCENE

Switches the input source and the sound field program with a single

button (☞

p. 26). Press this key when this unit is in standby mode to

switch on the unit.

m TONE CONTROL

Adjusts high-frequency/low-frequency output of speakers/headphones

(☞

p. 25).

n PROGRAM l / h

Switches between the sound field effect (sound field program) you are

using and the surround sound decoder (☞

p. 26). Press either the left

or right key repeatedly to cycle through the input sources in order.

o STRAIGHT

Changes a sound field program to straight decoding mode (☞

p. 27).

p VIDEO AUX jacks

For connecting video cameras, game consoles, and portable music

players to this unit temporarily.

Attach the supplied VIDEO AUX input cover when not using this

jack.

q VOLUME

Adjusts the volume level.

Part names and functions

VIDEO

AUX

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

VOLUME

DVD

RADIO

INPUT

PROGRAM

SCENE

VIDEO

AUDI O

PORTABLE

INFO

MEMORY

PRESET

FM AM

TUNING

YPAO MIC

m ok n

lj q

c fe gd h

1 : Usable when you have selected tuner input.

En 6

INTRODUCTION

Part names and functions

Rear panel

a DOCK jack

For connecting an optional Yamaha iPod universal dock (such as

YDS-12) (☞

p. 35) or Bluetooth wireless audio receiver (YBA-10)

(☞

p. 37).

b HDMI OUT jack

For connecting an HDMI - compatible TV to output audio/video

signals to (☞

p. 13).

c HDMI1-4 jacks

For connecting external components equipped with HDMI-

compatible outputs to receive audio/video signals from (☞

p. 15).

d ANTENNA jacks

For connecting AM and FM antennas (☞

p. 20).

e COMPONENT VIDEO jacks

For connecting TV that are compatible with component video signals,

using three cables to output video signal (☞

p. 13).

f AV1-5 jacks

For connecting to external devices equipped with audio/video outputs

so that this unit can receive audio/video signals (☞

p. 16, p. 17).

g AV OUT jacks

For outputting audio/video signals received when analog inputs (AV3-

5 or AUDIO1-2) are selected (☞

p. 19).

h AUDIO1-2 jacks

For connecting to external components equipped with analog audio

outputs to input sound into this unit (☞

p. 18).

i MONITOR OUT jack

For connecting a TV capable of receiving video input, and outputting

video signals to it (☞

p. 14).

j AUDIO OUT jacks

For outputting audio signals received when analog inputs such as the

AV5 or AUDIO1-2 jacks are selected (☞

p. 19).

k SUBWOOFER jack

For connecting a subwoofer with a built-in amplifier (☞

p. 11).

l SPEAKER terminals

For connecting the front, center, and surround speakers (☞

p. 11).

m VOLTAGE SELECTOR

(Asia and General models only)

Select the switch position according to your local voltage (Refer to

Quick Reference Guide).

n Power cord

For connecting this unit to an AC wall outlet.

ANTENNA

GND

COMPONENT

VIDEO

OPTICAL

(

)

AUD

IO 1

AUD

IO 2

COAXIAL

(

)

COAXIAL

OPTICAL

VIDEO

CENTER

SURROUND

HDMI 1

(

BD/DVD

)

HDMI 2 HDMI 3

HDMI 4

FRONT

COMPONENT

VIDEO

MONITOR OUT

HDMI

OUT

MONITOR OUT

OUT

SUBWOOFER

AUDIO

OUT

SPEAKERS

VOLTAGE

SELECTOR

110V-

120V

220V-

240V

COMPONENT

VIDEO

HDMI

OUT

SUBWOOFER

ANTENNA

COMPONENT

IDE

PTI

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

IO 1

IO 2

AXIA

(

)

AXIA

PTI

IDE

HDMI 1

(

DVD

)

HDMI 2

DMI

HDMI 4

ARC

fg khi l

e j

ARC

DOCK

Distinguishing the input and output jacks

The area around the audio/video output jacks is

marked in white to prevent connection errors.

Use these jacks to output audio/video signals

to a TV or other external component.

Output jacks

En 7

INTRODUCTION

Part names and functions

Front panel display

a HDMI indicator

Lights up when HDMI signals are input at the selected HDMI input

source.

b CINEMA DSP indicator

Lights up when a sound field effect that uses CINEMA DSP

technology is selected.

c Tuner indicator

Lights up when receiving an FM/AM broadcast.

d iPod CHARGE indicator

Lights up when an iPod/iPhone is connected through an optional

Yamaha iPod universal dock (such as YDS-12), and the iPod Standby

Charge function is active (☞

p. 36).

e SLEEP indicator

Lights up when the sleep timer is activated (☞

p. 8).

f MUTE indicator

Flashes when audio is muted.

g VOLUME indicator

Displays the current volume level.

h Cursor indicators

Light up if corresponding cursors on the remote control are available

for operations.

i Multi information display

Displays a range of information on menu items and settings.

j Speaker indicators

Indicate speaker terminals from which signals are output.

SL SR

Front speaker L

Surround speaker L

Subwoofer

Front speaker R

Surround speaker R

Center speaker

■ Changing the front panel display

The front panel can display sound field programs and surround

decoder names as well as the active input source.

Press fINFO repeatedly to cycle through input source →

sound field program → surround decoder in order. J1

SL SR

STRAIGHT

HDMI1

VOL.

Input source name

Sound field program (DSP program)

STEREO

SLEEP

VOL.

TUNED

SL SR

MUTE

iPod

CHARGE

abcedgf

hi jh

1 : While selecting a tuner input, the FM/AM frequency is displayed instead of the input source.

En 8

INTRODUCTION

Part names and functions

Remote control

a Remote control signal transmitter

Transmits infrared signals.

b TRANSMIT

Lights up when a signal is output from the remote control.

c SOURCE A (SOURCE Power)

Switches an external component on and off.

d Input selector

Select an input source on this unit from which to playback.

e Tuner keys

Operates the FM/AM tuner. These keys are used when using the tuner

input.

f INFO

Cycles the information displayed on the front panel display (the name

of the currently selected input source, the sound field program, the

surround decoder, the FM/AM tuner frequency, etc.)(☞

p. 7).

g Sound selection keys

Switch between the sound field effect (sound field program) you are

using and the surround decoder (☞

p. 26).

h SCENE

Switches the input source and the sound field program with a single

button (☞

p. 26). Press this key when this unit is in standby mode to

switch on the unit.

i SETUP

Displays a detailed Setup menu for this unit (☞

p. 42).

j Cursor B / C / D / E, ENTER, RETURN

k External component operation keys

Operate recording, playback, and menu displays etc. for external

components. J1

l Numeric keys

Enter numbers.

m TV control keys

Operate a monitor such as a TV.

n CODE SET

Sets remote control codes for external component operations (☞

p. 53,

p. 57

o RECEIVER A (RECEIVER Power)

Switches this unit between on and standby modes.

p SLEEP

Sets this unit to place itself in standby mode automatically after a

specified period of time has elapsed (sleep timer). Press this key

repeatedly to set the time for the sleep timer function. The front panel

display indicator lights up when the sleep timer is activated.

q OPTION

Displays the Option menu for each input source (☞

p. 39).

r VOLUME +/-

Adjusts the volume level (☞

p. 25).

s MUTE

Turns the mute function of the sound output on and off (☞

p. 25).

RECEIVER

SCENE

OPTION

SETUP

RETURN

VOLUME

ENHANCER

SUR. DECODE

STRAIGHT

HDMI

AUDIO

TRANSMIT

SLEEP

1234

125

V-AU X

TUNER

INFO

MEMORY

PRESET

TUNING

MOVIE MUSIC

STEREO

DVD

RADIO

MUTE

ENTER

7 856

1234

REC

ENT

TV VOL TV CH

TOP

DISPLAY

SOURCE

CODE SET

INPUT

MUTE

DOCK[ A ] [ B ]

POP-UP

HDMI1-4 HDMI1-4 jacks

AV1-5 AV1-5 jacks

AUDIO1-2 AUDIO1-2 jacks

V-AUX Front panel VIDEO AUX jacks

[A]/[B] Changes the external component you operating

with the kExternal component operation

keys without changing inputs. J1

DOCK A Yamaha iPod universal dock or Bluetooth

wireless audio receiver connected to the DOCK

jack.

TUNER FM/AM tuner

FM Sets the FM/AM tuner band to FM.

AM Sets the FM/AM tuner band to AM.

MEMORY Presets radio stations.

PRESET F / G Selects a preset station.

TUNING H / I Changes tuning frequencies.

Cursor B / C / D / E Select menu items and change settings when

settings menus, etc are displayed.

ENTER Confirms a selected item.

RETURN Returns to the previous screen when setting

menus are displayed, or ends the menu display.

Sleep 120min. Sleep 90min.

Sleep 60min.Sleep 30min.Sleep Off

1 : You can use separate kExternal component operation keys for each input source to operate registered components. Remote control codes must be registered for

each input in advance if you wish to operate external components (☞

p. 53).

En 9

CONNECTIONS

This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and

connections in your listening environment.

Speaker channels and functions

■

Front left and right speakers

The front speakers are used for the front channel sounds (stereo sound) and effect sounds.

Front speaker layout:

Place these speakers at an equal distance from the ideal listening position in the front of the room.

When using a projector screen, the appropriate top positions of the speakers are about 1/4 of the screen

from the bottom.

■

Center speaker

The center speaker is for the center channel sounds (dialog, vocals, etc.).

Center speaker layout:

Place it halfway between the left and right speakers. When using a TV, place the speaker just above or

just under the center of the TV with the front surfaces of the TV and the speaker aligned.

When using a screen, place it just under the center of the screen.

■

Surround left and right speakers

The surround speakers are for effect and vocal sounds with the 5.1-channel speakers providing rear-

area sounds.

Surround speaker layout:

Place the speakers at the rear of the room on the left and right sides facing the listening position. They

should be placed between 60 degrees and 80 degrees from the listening position and with the speaker

tops at a height of 1.5 – 1.8 m from the floor.

■

Subwoofer

The subwoofer speaker is used for bass sounds and low-frequency effect (LFE) sounds included in

Dolby Digital and DTS. Use a subwoofer that is equipped with an internal amplifier.

Subwoofer speaker layout:

Place it exterior to the front left and right speakers facing slightly inward to reduce echoes from the

wall.

Connecting speakers

Ex.

En 10

CONNECTIONS

Connecting speakers

Speaker layout

5.1-channel speaker layout (5 speakers + subwoofer)

Connecting speakers

Connect your speakers to their respective terminals on the rear panel.

• Connect at least two speakers (front left and right).

• If you cannot connect all five speakers, give priority to the surround speakers.

• The surround speakers should be placed between 60 degrees and 80 degrees from the listening position.

■ CRT monitors

We recommend that you use magnetically shielded speakers to avoid video distortion, especially for

the front and center speakers near the screen.

If your screen still gets interference from magnetically shielded speakers, move the speakers farther

away from your TV.

60q

80q

Front speaker R

Front speaker L

Center speaker

Surround speaker L

Surround

speaker R

Subwoofer

CAUTION

• Remove the AC power cord of this unit from the power outlet before connecting the speakers.

• Generally speaker cables consist of two parallel insulated cables. One of these cables is a different

color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined)

cable into the “+” (positive, red) terminal on this unit and the speakers, and the other cable into the “-”

(minus, black) terminal.

• Be careful that the core of the speaker cable does not touch anything or come into contact with the metal

areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit,

“CHECK SP WIRES!” will appear on the front panel display when this unit is switched on.

ANTENNA

GND

AUDI O

CENTER

SURROUND

DMI 4

FRONT

R OUT

SUBWOOFER

AUDI O

OUT

SPEAKERS

Surround speaker

Front speaker

Subwoofer Center speaker

En 11

CONNECTIONS

Connecting speakers

■

Connecting front speakers

Remove approximately 10mm of insulation from the

ends of the speaker cables, and twist the bare wires

of the cables together firmly so that they will not

cause short circuits.

Loosen the speaker terminals.

Insert the bare wire of the speaker cable into the gap

on the side of the terminal.

Tighten the terminal.

■

Connecting center speakers / surround

speakers

Press the tab on the speaker terminal down.

Insert the speaker cable end into the terminal.

Lift the tab to fix the speaker cable in place.

■

Connecting the subwoofer

Connect the subwoofer input jack to the

SUBWOOFER jack on this unit with an audio pin

cable.

Set the subwoofer volume as follows.

Volume: Set to approximately half volume (or slightly less than

half).

Crossover frequency (if available): Set to maximum.

Connecting the banana plug (Except U.K., Europe,

Asia and Korea models)

Tighten the knob, and then insert the banana plug into the end of

the terminal.

FRONT

KERS

FRONT

KERS

Banana plug

CENTER

SURROUND

SPEAKE

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Subwoofer examples

En 12

CONNECTIONS

Cable plugs and jacks

The main unit is equipped with the following input/output jacks. Use jacks and cables appropriate for

components that you are going to connect.

■

Audio/Video jacks

HDMI jacks

Digital video and digital sound are transmitted through a single jack.

Only use an HDMI cable.

■

Analog video jacks

■

Audio jacks

Connecting external devices

• Use a 19-pin HDMI cable with the HDMI logo.

• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.

COMPONENT VIDEO jacks

The signal is separated into three components:

luminance (Y), chrominance blue (P

B), and

chrominance red (P

R).

Use component video pin cables with three plugs.

VIDEO jack

This jack transmits conventional analog video

signals.

Use video pin cables.

HDMI cable

Component video pin cable

Video pin cable

OPTICAL jacks

These jacks transmit optical digital audio signals.

Use fiber-optic cables for optical digital audio

signals.

COAXIAL jacks

These jacks transmit coaxial digital audio signals.

Use pin cables for digital audio signals.

AUDIO jacks

These jacks transmit conventional analog audio

signals.

Use stereo pin cables, connecting the red plug to

the red R jack, and the white plug to the white L

jack.

PORTABLE jack

This jack transmits conventional analog audio

signals.

Use a stereo mini-plug cable when connecting.

Digital audio fiber-optic cable

Digital audio pin cable

Stereo audio pin cable

Stereo mini-plug cable

En 13

CONNECTIONS

Connecting external devices

Connecting a TV monitor

This unit is equipped with the following three types of output jack for connection to a TV.

HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input

signal format supported by your TV.

Video signals input from a particular type of jack(s) are output from the same type of jack(s).

For example, these three output devices must be connected to the monitor by matching input/output

jacks and cables, and then you must change the TV’s input mode to the proper setting.

■

Connecting an HDMI video monitor

Connect the HDMI cable to the HDMI OUT jack.

■

Connecting a component video monitor

Connect the component video cable to the COMPONENT VIDEO (MONITOR OUT) jacks.

COMPONENT

VIDEO

MONITOR OUT

HDMI

OUT

MONITOR OUT

COMPONENT

IDEO

IDE

HDMI

(

D/DV

)

HDMI 2

DMI 3

HDMI 4

DOCK

ARC

HDMI OUT jack

COMPONENT VIDEO jacks

(MONITOR OUT)

VIDEO jack

(MONITOR OUT)

COMPONENT

VIDEO

HDMI

VIDEO

COMPONENT

VIDEO

HDMI

VIDEO

Input Output

HDMI input

Component

video input

Video input

• Use a 19-pin HDMI cable with the HDMI logo.

• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.

• When using a TV that supports Audio Return Channel function, audio/video signals can be transmitted

mutually between the unit and TV with a single HDMI cable (☞

p. 60).

HDMI

OUT

OMPONEN

IDE

PTICA

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIA

(

)

AXIAL

PTI

IDE

HDMI

(

D/DV

)

HDMI 2

HDMI

HDMI 4

NEN

IDE

NIT

OUT

NIT

OUT

AUDI

OUT

DOCK

ARC

HDMI

HDMI input

COMPONENT

VIDEO

MONITOR OUT

COMPONENT

IDE

PTICA

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIA

(

)

AXIAL

PTI

IDE

HDMI

(

BD/DV

)

HDMI 2

DMI

HDMI 4

HDM

NIT

OUT

UDI

OCK

COMPONENT

VIDEO

Component video input

En 14

CONNECTIONS

Connecting external devices

■

Connecting a video monitor

Connect the video pin cable to the VIDEO (MONITOR OUT) jack.

■

Listening to TV audio

To transmit sound from the TV to this unit, connect as followings according to the TV:

When using a TV that supports the Audio Return Channel function and HDMI

Control function

When your TV supports both HDMI Control (Ex. Panasonic VIERA Link) and Audio Return

Channel functions, audio/video output from the unit to the TV and audio output from the TV to the

unit are possible using a single HDMI cable.

The input source is switched automatically to match operations carried out on the TV, and that

makes TV sound control easier to use.

For the connections and settings, refer to “Single HDMI cable input to TV audio with Audio Return

Channel function” (☞

p. 60).

When using a TV that supports the HDMI Control functions

When using a TV that supports HDMI Control functions (Ex. Panasonic VIERA Link), if HDMI

Control functions are enabled on the unit, then input source can be switched automatically to match

operations carried out on the TV.

For the connections and settings, refer to “Switching the input source on this unit automatically

when listening to TV audio” (☞

p. 59).

MONITOR OUT

COMPONENT

IDE

PTICA

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIA

(

)

AXIAL

PTI

IDE

HDMI

(

BD/DV

)

HDMI 2

DMI

HDMI 4

NEN

IDEO

NIT

OUT

HDM

UDI

OCK

VIDEO

Video input

When using other TVs

To transmit sound from the TV to this unit, connect its AV1-5 or AUDIO1-2 jacks to the TV’s audio

output jacks.

Depending on the connection on TV, connect the TV’s audio output to the AV1-5 or AUDIO1-2.

Select the input source connected via TV’s audio output jack to enjoy the TV sound.

If the TV supports optical digital audio output, we recommend that you connect the TV audio output

to the receiver’s AV4 jack.

Connecting to AV4 allows you to switch the input source to AV4 with just a single key operation

using the SCENE function (☞

p. 26).

You can control your TV using the receiver’s remote control by entering the TV’s remote control

code (☞p. 53).

TV audio output Connection

Optical digital audio output Connect to the OPTICAL jack of the AV1 or AV4 with a digital audio pin

cable.

Coaxial digital audio output Connect to the COAXIAL jack of the AV2 or AV3 with a fiber-optic cable.

Analog stereo output Connect to one of the AV5, AUDIO1, AUDIO2, or V-AUX with a stereo pin

cable.

OPTICAL

COAXIAL

(

)

COAXIAL

OPTICAL

NEN

VIDE

HDMI 1

(

DVD

)

HDMI 2

HDMI

OMPONENT

VIDE

NIT

HDMI

NIT

OPTICAL

Audio output

(Optical)

Available input jacks

En 15

CONNECTIONS

Connecting external devices

Connecting BD/DVD players and other devices

This unit has the following input jacks. Connect them to the appropriate output jacks on

the external components.

■

Connecting BD/DVD players and other devices with

HDMI

Connect the device with an HDMI cable to one of the HDMI1-4 jacks.

Select the HDMI input (HDMI1-4) that the external device is connected to for

playback.

OPTION

HDMI

1234

ENTER

ENT

TV V

L TV

NPUT

RECEIVER

ENE

RETURN

ENHAN

R. DE

TRAI

UDI

TRAN

LEE

V-A

TUNER

NIN

VIE M

TERE

RADI

P-

PLA

SOU

[

]

[

]

dInput selector

jCursor C / D / E

jENTER

qOPTION

Input jack Video input Audio input

HDMI1 HDMI HDMI

HDMI2 HDMI HDMI

HDMI3 HDMI HDMI

HDMI4 HDMI HDMI

AV1 Component video Optical

AV2 Component video Coaxial digital

AV3 Video Coaxial digital

AV4 Video Optical

AV5 Video Analog (Stereo)

AUDIO1 — Analog (Stereo)

AUDIO2 — Analog (Stereo)

VIDEO AUX Video Analog (Stereo)

(

BD/DVD

)

COMPONENT

VIDE

OPTICAL

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIAL

(

)

AXIAL

PTI

VIDE

NEN

VIDEO

NIT

DMI

NIT

UDIO

OCK

HDMI

HDMI output

BD/DVD player

■ Receiving audio from other input sources

This unit can use the AV1-5 or AUDIO1-2 input jacks to receive audio signals from

other audio input sources.

For example, if an external device cannot produce audio signals from an HDMI jack,

use the following method to change the audio input.

Use the dInput selector to select the desired HDMI input source.

Press qOPTION to display the Option menu. J1

Press jCursor C until “Audio In” is displayed, and then press

jENTER.

Press jCursor D / E to select the audio input source.

Once you have completed the setup, press qOPTION to close the

Option menu.

1 : See the section on “Configuring the settings specific for each input source (Option menu)” for details on

the Option menu (☞

p. 39).

OPTICAL

(

BD/DVD

)

NEN

VIDEO

(

)

AUDIO 1

AUDI O 2

AXIA

(

)

AXIAL

PTI

VIDEO

HDMI 2 HDMI

HDMI 4

NEN

IDE

MONITOR OUT

HDMI

OUT

NIT

OUT

UDI

DOCK

HDMI

OPTICAL

HDMI

HDMI/Audio (Optical)

output

BD/DVD player

SL SR

Audio;;;;;;AV1

HDMI1

VOL.

If you have selected AV1 input audio (optical digital)

Inputs that change the audio source

Assignable audio input jacks

En 16

CONNECTIONS

Connecting external devices

■

Connecting BD/DVD players and other devices with component

cables

Connect the device with a component video cable to one of the AV1-2 input jacks.

Using optical digital audio output sources

Select the AV1 input that the external device is connected to for playback.

Using coaxial digital audio output sources

Select the AV2 input that the external device is connected to for playback.

COMPONENT

VIDEO

OPTICAL

AV 1

(

)

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIAL

(

)

AXIA

PTI

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

DOC

COMPONENT

VIDEO

OPTICAL

Component video / Audio (Optical)

output

BD/DVD player

AV 2

COAXIAL

OMPONEN

VIDE

OPTICAL

(

)

AV 1

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

(

)

AXIA

PTI

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

DOC

COMPONENT

VIDEO

COAXIAL

Component video / Audio (Coaxial)

output

BD/DVD player

■ Component connections to analog audio output devices

You can use the video input from the AV1-2 jacks in combination with the audio input from other

AV inputs or AUDIO1-2.

When connecting these devices, select the AV3-5 or the AUDIO1-2 jacks as the audio input for AV1

or AV2. See “Receiving audio from other input sources” (☞

p. 15) for detailed setup guidance.

Select the AV input source (AV1-2) that is connected by component video cable to the external

device for playback.

COMPONENT

VIDEO

PTI

(

)

AUDIO 1

AUDIO 2

AXIA

(

)

AXIAL

PTI

IDE

HDMI 1

(

BD/DV

)

HDMI

HDMI 4

NEN

IDE

NIT

OUT

HDMI

OUT

NIT

OUT

UDI

DOCK

AUDIO

COMPONENT

VIDEO

Component video / Audio

output

Game console

SL SR

Audio;;;AUDIO1

AV1

VOL .

En 17

CONNECTIONS

Connecting external devices

■

Connecting BD/DVD players and other devices with video cables

Connect the external device with a video pin cable to one of the AV3-5 input jacks.

Using optical digital audio output sources

Select the AV4 input that the external device is connected to for playback.

Using coaxial digital audio output sources

Select the AV3 input that the external device is connected to for playback.

Using analog stereo audio output sources

Select the AV5 input that the external device is connected to for playback.

OPTICAL

OMPONEN

VIDE

OPTICAL

AV 1

AV 2

AV 3

AV 5

AUDI O 1

AUDI O 2

AXIAL

(

)

AXIA

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

DOC

VIDEO

OPTICAL

Video / Audio (Optical)

output

BD/DVD player

(

)

COAXIAL

VIDEO

OMPONEN

VIDE

OPTICAL

(

)

AV 1

AV 2

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIAL

PTI

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

DOC

ARC

VIDEO

COAXIAL

Video / Audio (Coaxial)

output

BD/DVD player

AV 5

OMPONEN

VIDE

OPTICAL

(

)

AV 1

AV 2

AV 3

AV 4

AUDIO 1

AUDI O 2

AXIAL

(

)

AXIA

PTI

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

DOC

AUDIO

VIDEO

Video / Audio

output

BD/DVD player

En 18

CONNECTIONS

Connecting external devices

■

Connecting CD players and other audio devices

Using analog stereo output sources

Select the audio input (AUDIO1-2) that the external device is connected to for playback.

Using optical digital output sources

Select the AV input (AV1 or AV4) that the external device is connected to for playback.

Using coaxial digital output sources

Select the AV input (AV2 or AV3) that the external device is connected to for playback.

AUDI O 1

AUDI O 2

OMPONEN

VIDE

OPTICAL

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AXIAL

(

)

AXIA

PTI

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

DOC

AUDIO

Audio output

CD player

OPTICAL

OMPONEN

VIDE

AV 2

AV 3

AV 5

AUDI O 1

AUDI O 2

AXIAL

(

)

AXIA

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

DOC

OPTICAL

CD player

Audio (Optical) output

We recommend connecting audio devices with an coaxial digital output to the AV3 coaxial digital

jack on this unit. This connection allows you to switch to the AV input 3 just by pressing the “CD”

SCENE key (☞

p. 26).

COAXIAL

(

)

COAXIAL

OMPONEN

VIDE

OPTICAL

(

)

AV 1

AV 4

AV 5

AUDIO 1

AUDI O 2

PTI

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

DOC

COAXIAL

Audio (Coaxial) output

CD player

En 19

CONNECTIONS

Connecting external devices

Connecting video cameras and portable audio players

Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, game consoles, or

portable audio devices to the receiver.

Select the V-AUX input to use these connected devices.

Transmitting input A/V to external devices

This receiver can transmit selected incoming analog audio/video signals to external devices through the

AV OUT and AUDIO OUT jacks. You can record these input audio and video signals to VCRs or

similar devices, or send them to other TVs or external devices.

Using the AV OUT jacks

Connect this jacks to the external device’s video input jack and analog audio input jacks.

Using the AUDIO OUT jacks

Connect this jack to the external device’s analog audio input jacks.

• Be sure to turn down the volume when connecting this unit and the other devices.

• When external components are connected to both the PORTABLE jack and the AUDIO jacks, the sound

output from the PORTABLE jack is transmitted.

AU D I O

VIDEO

AUDIO OUT

VIDEO

AU X

STRAIGHT

RADIO

VIDEO

AUDIO

PORTABLE

Audio output

Portable audio player Video cameras

Audio output

Video output

HDMI audio/video signals, component video signals, and digital audio signals cannot be transmitted

from these jacks.

OUT

AUDI O

OUT

NENT

VIDE

PTI

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIAL

(

)

AXIAL

PTI

VIDE

HDMI 1

(

)

HDMI

NEN

VIDE

MONITOR OUT

HDMI

NIT

DOC

AUDIO

VIDEO

AUDIO

Audio recorder

Audio input

VCR

Video / Audio

input

En 20

CONNECTIONS

An indoor FM antenna and an AM loop antenna are included with this receiver. Connect these antennas

properly to their respective jacks.

Connecting the FM/AM antennas

■ Improving FM reception

We recommend using an outdoor antenna. For more information, consult the nearest authorized

dealer.

■ Improving AM reception

Connect this unit to an outdoor antenna with a 5-10 m vinyl-coated wire. Make sure the AM loop

antenna is still connected.

Connecting the GND jack can reduce noise. Connect the jack to a store-bought ground bar or copper

plate with a vinyl-covered wire and bury this new attachment in moist ground.

The GND jack is not to be connected to the ground socket of an electrical outlet.

GND

ENTER

DMI

HDMI 4

MONITOR OUT

PEAKER

Indoor FM antenna

AM loop antenna

Position the AM antenna away from the receiver. The

wires of the AM antenna have no polarity.

You can connect either wire to the AM jack or the

GND jack.

Connecting the AM loop antenna

ReleaseInsertPress and hold

En 21

CONNECTIONS

This unit is equipped with a YPAO (Yamaha Parametric room Acoustic Optimizer) that adjusts the status, size, and volume balance of the speakers in order to provide an optimal sound field. Using

YPAO allows you to automatically configure settings for which specialist knowledge is usually needed, such as adjusting speaker output and acoustic parameters to suit your listening room (the room

in which this unit is placed). J1

Check the following before using YPAO.

This unit

• The headphones are removed.

Subwoofer

• The power is turned on.

• The auto power-off function (if present) is set to off.

• Volume is set to approximately half, and the cross-over frequency (if

present) is set to maximum.

Place the supplied YPAO microphone at ear height in

your listening position.

Face the head of the YPAO microphone upwards.

Switch this unit on.

Connect the YPAO microphone to the YPAO MIC jack

on the front panel.

“MIC ON. YPAO START” appears on the front panel display, and

then changes to display the following. J2

Set up the speaker parameters automatically (YPAO)

When you use YPAO, a test tone will be output from the

speakers for approximately three minutes and acoustic

measuring will be performed. When using YPAO, be careful of

the following.

• The test tone is output at high volume. Please refrain from using

this function at night when it may be a nuisance to others nearby.

• Please take care that the test tone does not frighten any small

children.

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Subwoofer examples

When positioning the microphone, we recommend that you use

equipment that allows you to adjust the height (such as a tripod)

as a microphone stand. When using a tripod, use the tripod

screws to fix the microphone in place.

YPAO microphone

INFO

YPAO MIC

VOL.

SL SR

Press[SETUP]

YPAO

Continues to the

1 : When you have changed the number of speakers or the locations in which they

are installed, first use YPAO to adjust the speaker balance.

2 : To cancel measurement, disconnect the YPAO microphone.

En 22

CONNECTIONS

Set up the speaker parameters automatically (YPAO)

Press iSETUP to start measurement.

The following display appears if measurement finishes

without any problems.

Press jENTER to apply the results of

measurement.

Remove the YPAO microphone.

YPAO finishes automatically when the YPAO

microphone is removed.

SETUP

ENTER

ENT

TV V

L TV

NPUT

RECEIVER

ENE

PTI

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

V-A

TUNER

NIN

VIE M

TERE

RADI

P-

PLA

SOU

[

]

[

]

iSETUP

jCursor C / D / E

jENTER

This completes preparations. To achieve more

accurate results, be careful of the following when

measuring.

• Measuring will take approximately three minutes.

Keep the room as quiet as possible during

measurement.

• Wait in the corner of the listening room during

measurement or leave it entirely, to avoid becoming an

obstruction between the speakers and the YPAO

microphone.

NOTE

When a problem occurs, an error message or report

appears either during or after measurement. Use the

following page as a reference to solve the problem,

and carry out YPAO again.

VOL.

SL SR

Progress00%

YPAO

Display during measurement

VOL.

SL SR

YPAOComplete

YPAO

You can use the following method to cancel

measurement results if you want to redo the

measuring. Press jCursor C to switch to the

following display, the use jCursor D / E to select

“Cancel” and press jENTER. After this operation,

use the same procedure to carry out YPAO again.

The YPAO microphone is sensitive to heat. When you

have finished measuring, store the microphone out of

direct sunlight, and away from locations that may

experience high temperatures, such as on top of AV

equipment.

SL SR

Disconnect MIC

YPAO

VOL.

SL SR

Set>Cancel

YPAO

VOL.

En 23

CONNECTIONS

Set up the speaker parameters automatically (YPAO)

■

When an error message appears

during measurement

Check the content of the message from the list of

messages (☞

p. 24) to resolve the problem, and carry out

the measurement process again.

Check the error code that appears in the display, and

carry out YPAO again by performing the following steps.

When “E-1” or “E-2” is displayed:

Press jENTER once, and then press

jCursor E to select “Exit.”

Press jENTER to finish YPAO, and set the

unit to standby mode.

Check that the speakers are properly

connected.

Turn on the unit, and then carry out YPAO

again.

When “E-5” to “E-9” is displayed:

Check that the environment is suitable for

accurate measurement.

Press jENTER to switch the display.

Check that “Retry” is selected, and then

press jENTER to carry out YPAO again.

When “E-10” is displayed:

Press jENTER once, and then press

jCursor E to select “Exit.”

Press jENTER to finish YPAO.

Switch the unit to standby mode.

Turn on the unit again, and then carry out

YPAO.

■

When a warning message appears

after measurement

Check the content of the message from the list of

messages (☞

p. 24) to resolve the problem. You can

confirm the speaker that has the problem when that

speaker’s indicator lights up.

When multiple warning messages appear:

Use jCursor D / E to display other warning messages.

When applying the results of measurement:

Press jENTER to switch display, the use jCursor D

/ E to select “Set” and press jENTER.

When cancelling YPAO:

Press jENTER to switch display, the use jCursor D

/ E to select “Cancel” and press jENTER.

ENTER

L TV

NPUT

RECEIVER

ENE

PTI

RETURN

ENHAN

TRAI

DMI

UDI

TRAN

LEE

NIN

TERE

RADI

P-

SOU

DOC

[

]

[

]

jCursor D / E

jENTER

E-9:CANCEL

YPAO

VOL.

Error message (example)

NOTE

Although you can apply the results of measurement

when a warning message appears, doing so will not

provide optimal sound. We recommend you resolve

the problem and then carry out YPAO again.

SL SR

W-3:LEVEL

YPAO

VOL.

Warning message (example) Speaker that has a

problem.

En 24

CONNECTIONS

Set up the speaker parameters automatically (YPAO)

■

Message list

■ When a warning message appears before

measurement

■ Error message

■ Warning message

NOTE

If the following messages appear, resolve the problems that have

occurred and carry out the measurement process again.

Connect MIC! The YPAO microphone is

not connected.

Connect the YPAO

microphone to the YPAO

MIC jack on the front

panel.

Unplug PHONES! The headphones are

connected.

Remove the headphones.

Memory Guard! The settings of this unit

are protected.

Set “Memory Guard” in

the Setup menu to “Off.”

E-1:FRONT SP The unit was not able to

find the front channel.

Check that the left and

right front speakers are

connected correctly.

E-2:SUR. SP The unit was only able to

find one of side of the

surround channels.

Check that the left and

right front surround

speakers are connected

correctly.

E-5:NOISY The noise is too loud,

preventing accurate

measurements from

being taken.

Measure again in quiet

surroundings. Turn off any

devices in the room that

may be emitting noise, or

place them further away

from the YPAO

microphone.

When this message is

displayed, selecting

“Proceed” will allow you

to continue measuring.

However, we recommend

resolving the problem and

measuring again, as

continuing measurement

without doing so will not

give accurate results.

E-7:NO MIC The YPAO microphone

has been removed.

While measuring, take

care not to touch the

YPAO microphone.

E-8:NO SIGNAL The YPAO microphone

could not distinguish a

test tone.

Check that the YPAO

microphone has been

installed correctly.

Check that each speaker

has been connected and

installed correctly.

The YPAO microphone

or the YPAO MIC jack

may be broken. Inquire at

the retailer where you

purchased this unit, or the

nearest Yamaha service

center.

E-9:CANCEL You have carried out an

operation that has

cancelled the measuring

process.

Carry out the measuring

process again. Do not

operate this unit by, for

example, adjusting the

volume.

E-10:INTERNAL An internal error has

occurred.

Turn off and on this unit,

and carry out the measuring

process again. Contact a

Yamaha service center if

“E-10” appears again.

W-1:PHASE The speakers displayed

are connected with the

opposite polarity.

Depending on the type of

speakers you are using

and the environment in

which you have them

installed, this message

may occur even if the

speakers are connected

correctly.

Depending on the type of

speakers, “W-1” may

display even if the

speakers are connected

correctly.

Check that the speaker

polarity + (plus), and -

(minus) are correct. If

these are connected

correctly, you can use the

speakers normally even

this message appears.

W-2:OVER 24m

(80ft)

The speakers displayed

are separated from the

listening position by

more than 24m, and

cannot be adjusted

correctly.

Install the speakers with

24m of the listening

point.

W-3:LEVEL The difference each

channel is too loud or too

low, and cannot be

adjusted correctly.

Check that all speakers

are installed in the same

surroundings.

Check that the speaker

polarity + (plus), and -

(minus) are correct.

We recommend the same

speakers or speakers with

as similar specifications

as possible.

Adjust the volume of the

subwoofer.

If “W-2” or “W-3” appears, you can apply measurement results,

but they will not give optimal results. We recommend that you

resolve the problem and carry out the measurement process

again.

En 25

PLAYBACK

Turn on external components (TV, DVD

player, etc.) connected to this unit.

Turn on this unit and select the input source

using dInput selector.

The name of the selected input source is displayed for

a few seconds. J1

Play the external component that you have

selected as the source input, or select a

radio station on the tuner.

Refer to the instruction manuals provided with the

external component for details on playback.

For details on how to tune in to FM/AM stations, refer

to “FM/AM tuning” (☞

p. 30).

Press rVOLUME +/- to adjust the volume.

To mute the output.

Press sMUTE to mute the audio output.

Press sMUTE again to unmute.

Adjusting high/low-frequency sound

(Tone control)

You can adjust the balance of the high-frequency range

(Treble) and low-frequency range (Bass) of sounds

output from the front left and right speakers to obtain

desired tone.

Press TONE CONTROL on the front panel

repeatedly to select “Treble” or “Bass.”

The current setting is displayed on the front panel

display.

Press PROGRAM l / h to adjust the output

level in those frequency ranges.

The display returns to the previous display soon after

you release the key.

Basic playback procedure

dInput selector

rVOLUME +/-

sMUTE

VOLUME

HDMI

AUDIO

1234

125

V-AUX

TUNER

MUTE

DOCK[ A ] [ B ]

ENT

TV V

L TV

NPUT

RECEIVER

ENE

PTI

RETURN

ENHAN

R. DE

TRAI

TRAN

LEE

NIN

VIE M

TERE

RADI

NTER

P-

PLA

SOU

The tone control of the speakers or headphones can be

set separately. Set the headphone tone control with the

headphones connected.

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFO

MEMORY

PRESET

FM AM

TONE CONTROL

PROGRAM l / h

YPAO MIC

SL SR

Treble 0.0dB

TONE

VOL.

Adjustable range -10.0 dB to +10.0 dB

Adjustment

increments

2.0 dB

If you set the balance extremely off, sounds may not

match those from other channels well.

1 : You can change the input source name displayed on the front

panel display as necessary (☞

p. 49).

En 26

PLAYBACK

This unit has a SCENE function that allows you to turn the power on and change input sources and sound field programs with one key.

Four scenes are available for different uses, such as

playing movies or music. The following input sources

and sound field programs are provided as the initial

factory settings.

Registering input sources/sound

field program

Use dInput selector to select the input

source you want to register.

Use the gSound selection keys to select

the sound field program you want to

Press one key repeatedly to select the sound field

program in the same category. For details on sound

field program, refer to “Selecting sound field programs

and sound decoders” on this page.

Press the hSCENE key until “SET

Complete” appears on the front panel

display.

This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel playback for almost any sound source using various

sound field programs stored on the chip, and a range of sound decoders.

Selecting sound field programs and

sound decoders

This unit offers sound field settings (sound field

programs) in many different categories suitable for

movies, music and other uses. Choose a sound field

program that sounds best with the source you are playing

back, rather than relying on the name or explanation of

the program.

Selects sound field program:

MOVIE category: Press gMOVIE repeatedly.

MUSIC category: Press gMUSIC repeatedly.

Selects stereo reproduction:

Press gSTEREO repeatedly.

Selects compressed music enhancer:

Press gSTEREO repeatedly.

Selects surround decoder:

Press gSUR. DECODE repeatedly.

Switches Straight decoding mode (☞p. 27):

Press gSTRAIGHT.

Changing input settings with a single key (SCENE function)

dInput selector

gSound selection keys

gMOVIE

gMUSIC

gSTEREO

gSUR. DECODE

gSTRAIGHT

hSCENE

SCENE

ENHANCER

SUR. DECODE

STRAIGHT

HDMI

AUDIO

1234

125

V-AUX

TUNER

MOVIE MUSIC

STEREO

DVD

RADIO

DOCK[ A ] [ B ]

ENT

TV V

L TV

NPUT

RECEIVER

PTI

RETURN

TRAN

MIT

LEE

NIN

ENTER

P-

PLAY

SOU

SCENE Input Sound field program

BD/DVD HDMI1 STRAIGHT

TV AV4 STRAIGHT

CD AV3 STRAIGHT

RADIO TUNER 5ch Enhancer

When changing “SCENE,” you can also use switch

between the external components that the remote

control operates

(☞p. 53).

SL SR

SET Complete

SCENE1

VOL .

Release the key when “SET Complete” is displayed.

Enjoying sound field programs

• Sound field programs are stored for each input source.

When you change the input source, the sound field

program previously selected for that input source is

applied again.

• If the sampling frequency of an input source is higher

than 96 kHz, this unit does not apply any sound field

programs.

• You can use the speaker indicators on the front panel

display to check what speakers are currently

outputting sound (☞

p. 7).

• You can adjust sound field elements (sound field

parameters) for each of the programs.

SL SR

Sci-Fi

MOVIE

VOL.

Sound field program categories

Program

En 27

PLAYBACK

Enjoying sound field programs

■

Enjoying unprocessed playback

(Straight decoding mode)

Use straight decoding mode when you want to playback

sound without sound field processing. You can playback

as follows in straight decoding mode.

2-channel sources such as CD

Stereo sound plays through the front left and right

speakers.

Multi-channel playback sources such as BD/

DVD

Plays back audio from a playback source without

applying sound field effects, using an appropriate

decoder to split the signal into multiple channels.

Press gSTRAIGHT to activate the straight

decoding mode.

Press gSTRAIGHT again to exit straight

decoding mode.

■

Enjoying stereo playback

Select “2ch Stereo” from the surround field programs

when you want to playback 2-channel stereo sound

(from the front speakers only), regardless of the

playback source.

Selecting “2ch Stereo” will playback as follows for the

playback of CD and BD/DVD sources.

2-channel sources such as CD

Stereo sound plays back through the front speakers.

Multi-channel sources such as BD/DVD

Playback channels other than the front channels in the

playback source are mixed with the front channels and

played back through the front speakers.

Press gSTEREO repeatedly to select “2ch

Stereo.”

To deactivate stereo playback, press any of

the gSound selection keys to select a

sound field program other than “2ch

Stereo.”

■

Enjoying sound field programs

without surround sound speakers

This unit allows you to use virtual surround speakers to

enjoy sound field surround effects, even without any

surround speakers (Virtual CINEMA DSP mode). You

can even enjoy surround sound presence with just a

minimal configuration of the front speakers only.

This unit will switch to Virtual CINEMA DSP mode

automatically when surround speakers are

unavailable. J1

■

Enjoying sound field programs

with headphones

Even when headphones are connected, you can enjoy the

reproduction sound field presence with ease (SILENT

CINEMA mode). J2

Sound selection keys

gSTRAIGHT

gSTEREO

ENHANCER

SUR. DECODE

STRAIGHT

MOVIE MUSIC

STEREO

ENT

TV V

L TV

NPUT

RECEIVER

ENE

PTI

RETURN

DMI

UDI

TRAN

MIT

LEE

V-A

TUNER

NIN

ADI

ENTER

P-

PLAY

SOU

OCK

[

]

[

]

SL SR

STRAIGHT

VOL.

SL SR

Sci-Fi

MOVIE

VOL.

Previously selected program

2ch Stereo

STEREO

VOL.

SL SR

Hall in Vienna

MUSIC

VOL.

1 : However, Virtual CINEMA DSP mode is not available in the

following conditions:

• When headphones are connected to this unit.

• When a “2ch Stereo” sound field program is selected.

• When straight decoding mode is selected.

2 : However, SILENT CINEMA mode is not available in the

following conditions:

• When a “2ch Stereo” sound field program is selected.

• When straight decoding mode is selected.

En 28

PLAYBACK

Enjoying sound field programs

Sound field programs

■

Category: MOVIE

Sound field programs optimized for viewing video sources such as movies, TV programs, and games.

■

Category: MUSIC

This sound field is suitable when listening to music sources such as CDs.

in the table indicates the sound field program for CINEMA DSP.

Standard This program creates a sound field emphasizing the surround feeling without disturbing the

original acoustic positioning of multi-channel audio such as Dolby Digital and DTS. It has

been designed with the concept of an ideal movie theater, in which the audience is

surrounded by beautiful reverberations from the left, right and rear.

Spectacle This program represents the spectacular feeling of large-scale movie productions. It

reproduces a broad theater sound field that matches cinemascope and wider-screen movies

with an excellent dynamic range providing everything from very small sound effects to

large, impressive sounds.

Sci-Fi This program clearly reproduces the finely elaborated sound design of the latest science

fiction and special effects-featuring movies. You can enjoy a variety of cinematographically

created virtual spaces reproduced with clear separation between dialog, sound effects and

background music.

Adventure This program is ideal for precisely reproducing the sound design of action and adventure

movies. The sound field restrains reverberations but puts emphasis on reproducing a

powerful space expanded widely to the left and right. The reproduced depth is also

restrained relatively to ensure the separation between audio channels and the clarity of the

sound.

Drama This sound field features stable reverberations that match a wide range of movie genres from

serious dramas to musicals and comedies. The reverberations are modest but offer an

optimum 3D feeling, reproducing effects tones and background music softly but cubically

around clear words and center positioning in a way that does not fatigue the listener even

after long hours of viewing.

Mono Movie This program is provided for reproducing monaural video sources such as a classic movie in

an atmosphere of a good old movie theater. The program produces the optimum expansion

and reverberation to the original audio to create a comfortable space with a certain sound

depth.

Sports This program allows the listeners to enjoy stereo sport broadcasts and studio variety

programs with enriched live feeling. In sports broadcasts, the voices of the commentator and

sportscaster are positioned clearly at the center while the atmosphere of the stadium expands

in an optimal space to offer the listeners a feeling of presence in the stadium.

Action Game This sound field is suitable for action games such as car racing, fighting games and FPS

games. The reality of, and emphasis on, various effects makes the player feel like they are

right in the middle of the action, allowing for greater concentration.

Roleplaying Game This sound field is suitable for role-playing and adventure games. This program adds depth

to the sound field for natural and realistic reproduction of background music, special effects

and dialog from a wide variety of scenes.

Hall in Munich This sound field simulates a concert hall with approximately 2500 seats in Munich, using

stylish wood for the interior finishing as normal standards for European concert halls. Fine,

beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual

seat is at the center left of the arena.

Hall in Vienna This is an approximately 1700-seat, middle-sized concert hall with a shoebox shape that is

traditional in Vienna. Pillars and ornate carvings create extremely complex reflections from

all around the audience, producing a very full, rich sound.

Chamber This program creates a relatively wide space with a high ceiling like an audience hall in a

palace. It offers pleasant reverberations that are suitable for courtly music and chamber

music.

Cellar Club This program simulates a live house with a low ceiling and homey atmosphere. A realistic,

live sound field features powerful sound as if the listener is in a row in front of a small stage.

The Roxy Theatre This is the sound field of a rock music live house in Los Angeles, with approximately 460

seats. The listener’s virtual seat is at the center left of the hall.

The Bottom Line This is the sound field at stage front in The Bottom Line, a famous New York jazz club once.

The floor can seat 300 people to the left and right in a sound field offering real and vibrant

sound.

Music Video This sound field offers an image of a concert hall for live performance of pop, rock and jazz

music. The listener can indulge oneself in a hot live space thanks to the presence sound field

that emphasizes the vividness of vocals and solo play and the beat of rhythm instruments,

and to the surround sound field that reproduces the space of a big live hall.

En 29

PLAYBACK

Enjoying sound field programs

■

Category: STEREO

Suitable for listening to stereo sources.

■

Category: ENHNCR (Compressed music enhancer)

Suitable for listening to compressed audio, such as MP3.

■

Category: SUR.DEC (Surround decode mode)

Select this program to playback sources with selected decoders. You can playback 2-channel sound

sources in up to 5-channels using a surround decoder.

2ch Stereo Use this program to mix down multi-channel sources to 2 channels. When multi-channel

signals are input, they are down mixed to 2 channels and output from the front left and right

speakers.

5ch Stereo Use this program to output sound from all speakers. When you play back multi-channel

sources, this unit down-mixes the source to 2 channels, and then outputs the sound from all

speakers. This program creates a larger sound field and is ideal for background music at

parties, etc.

Straight Enhancer Use this program to restore the original depth and dynamics of 2-channel or multi-channel

to compression audio.

5ch Enhancer Use this program to play back compression artifacts in 5-channel stereo.

q Pro Logic Reproduces sound using the Dolby Pro Logic decoder. This is suitable for all kinds of sound

sources.

q PLII Movie Reproduces sound using the Dolby Pro Logic II decoder. This is suitable for movies.

q PLII Music Reproduces sound using the Dolby Pro Logic II decoder. This is suitable for music.

q PLII Game Reproduces sound using the Dolby Pro Logic II decoder. This is suitable for games.

Neo:6 Cinema Reproduces sound using the DTS Neo:6 decoder. This is suitable for movies.

Neo:6 Music Reproduces sound using the DTS Neo:6 decoder. This is suitable for music.

En 30

PLAYBACK

The FM/AM tuner of this unit provides the following

two modes for tuning.

Normal tuning

You can tune in to a desired FM/AM station by searching

or specifying its frequency.

Preset tuning (☞p. 31)

You can preset the frequencies of FM/AM stations by

registering them to specific numbers, and later just select

those numbers to tune in.

Selecting a frequency for reception

(Normal tuning)

Press dTUNER to switch to the tuner input.

Press eFM or eAM to select a band to

receive.

FM/AM tuning

dTUNER

eFM

eAM

TUNER

FM AM

L TV

NPUT

RECEIVER

ENE

PTI

RETURN

ENHAN

TRAI

DMI

UDI

TRAN

LEE

-A

NIN

TERE

RADI

P-

SOU

DOC

[

]

[

]

When using the FM/AM tuner, adjust the direction of

the FM/AM antenna connected to this unit to get the

best reception.

(Asia and General models only)

The factory pre-set FM/AM tuner frequency steps are

9 kHz for AM and 50 kHz for FM.

Carry out the following settings and select the

frequency steps suitable for your listening

environment.

Set this unit to the standby mode.

Press A while pressing and holding

STRAIGHT on the front panel.

Release the keys when “ADVANCED SETUP” is

displayed on the front panel display.

After approximately 3 seconds, the top menu items

are displayed. J1

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFO

MEMORY

PRESET

FM AM

YPAO MIC

STRAIGHT

PROGRAM l / h

REMOTEID-ID1

Press PROGRAM h twice to display

“TU.”

Press STRAIGHT a few times to select

frequency steps.

Switch this unit to the standby mode, and

then switch it on again.

The power turns on, with the settings you made

configured.

TU-AM9/FM50

SL SR

FM87.50MHz

VOL.

Continues to the

1 : For detailed information on the advanced setup menu see

“Extended functionality that can be configured as needed

(Advanced Setup menu)” (☞

p. 56).

En 31

PLAYBACK

FM/AM tuning

Use eTUNING H / I to set a frequency to

receive.

TUNING H

Increases the frequency. Press and hold this key for

longer than a second to search automatically for a station

on a higher frequency than the current one. J1

TUNING I

Decreases the frequency. Press and hold this key for

longer than a second to search automatically for a station

on a lower frequency than the current one. J1

Registering and recalling a

frequency (Preset tuning)

You can register up to 40 FM/AM stations as preset

stations. There are two methods of presetting stations,

“Auto Preset” and “Manual Preset.” Use one of these

methods to register stations.

■

Presetting FM stations

automatically (Auto Preset)

The tuner detects FM stations with strong signals and

registers up to 40 automatically.

Press dTUNER to switch to the tuner input.

Press qOPTION to display the Option

menu. J3

Use jCursor B / C to select “Auto Preset.”

TUNER

eTUNING H / I

jCursor B / C / D / E

jENTER

jRETURN

lNumeric keys

qOPTION

OPTION

TUNER

TUNING

ENTER

7856

1234

ENT

L TV

NPUT

RECEIVER

ENE

RETURN

ENHAN

TRAI

DMI

UDI

TRAN

LEE

-A

TERE

RADI

P-

SOU

DOC

[

]

[

]

■ Entering a frequency number

In normal tuning mode, use the lNumeric keys on

the remote control to enter a frequency. Leave the

decimal point out when entering a number. J2

For example, enter as follows to select a station on

98.50MHz.

STEREO

TUNED

SL SR

FM98.50MHz

VOL.

Lights up when receiving

a broadcast from a station

Lights up when receiving

a stereo broadcast

9 8

■ When signal reception is poor

When you are receiving an FM broadcast and cannot

obtain a stable stereo broadcast, you can force this

unit to receive in a monaural mode.

Press dTUNER to switch to the tuner

input.

Press qOPTION to display the Option

menu. J3

Use jCursor B / C to select “FM Mode.”

Press jENTER and use the jCursor D /

E to select “Mono.”

When setting is completed, press

qOPTION to close the Option menu.

To return this unit to its original settings, use the

same procedure to return the settings to “Stereo.”

FMMode

OPTION

VOL .

FMMode:Mono

9850

VOL.

AM stations cannot be automatically registered. Use

manual station preset (☞

p. 32).

SL SR

Auto Preset

OPTION

VOL.

Continues to the

1 : When searching for a station, release the key once the search has

started.

2 : “Wrong Station!” appears on the front panel display when you

enter a frequency that is out of receivable range. Make sure that

the frequency entered is correct.

3 : See the section on “Configuring the settings specific for each

input source (Option menu)” for details on the Option menu

(☞

p. 39).

En 32

PLAYBACK

FM/AM tuning

Press jENTER, then press ePRESET F /

G or jCursor B / C to choose the preset

number from which to start the Auto Preset

function.

Auto Preset will begin approximately 5 seconds after

you select a preset number.

If you do not select a preset number, Auto Preset will

begin approximately 5 seconds after “READY” is

displayed.

The Option menu closes automatically when presetting

is complete. J1

■

Registering stations manually

(Manual Preset)

Select stations by hand and register them as presets

individually.

Tune in to the station you wish to register,

referring to “Selecting a frequency for

reception (Normal tuning)” (☞

p. 30).

Use one of the following methods to

receiving.

■ Registering to a preset number to which no

station is registered

Press eMEMORY for 2 seconds or longer.

The station will be registered automatically to the lowest

open preset number (or the next number after the one

registered most recently).

■ Designating a preset number for

registration

Press eMEMORY once, to display “Manual Preset” on

the front panel display. After a small wait, the preset

number that the station has been registered to will

appear.

Press ePRESET F / G to select the preset to register

the station to, and then press eMEMORY to register.

MEMORY

ePRESET F / G

jCursor B / C

jENTER

jRETURN

RETURN

MEMORY

PRESET

ENTER

L TV

NPUT

RECEIVER

ENE

PTI

ENHAN

TRAI

DMI

UDI

TRAN

LEE

NIN

TERE

RADI

P-

DISPLA

SOU

DOC

[

]

[

]

To cancel registration, press jRETURN.

SL SR

01:FM87.50MHz

READY

VOL.

Selecting a preset number

Status Frequency

Preset number

SEARCH MEMORY

During Auto Preset

Preset for stations

SL SR

Auto Preset

FINISH

VOL.

When Auto Preset is complete

STEREO

TUNED

SL SR

01:FM98.50MHz

MEMORY

VOL.

Registered frequencies

To cancel registration, press jRETURN or do not

operate the remote control for about 30 seconds.

SL SR

01:Empty

9850

VOL.

Preset number

The newly registered frequency

Empty, or the frequency registered

most previously.

Blinks

1 : The preset with the lowest preset number will be selected

automatically immediately after presetting.

En 33

PLAYBACK

FM/AM tuning

■

Recalling a preset station

You can call preset stations registered by automatic

station preset or manual station preset. J1

To select a registered station, press ePRESET

F / G to select the preset number of the

station. J2

Clearing preset stations

Press dTUNER to switch to the tuner input.

Press qOPTION to display the Option

menu. J3

Use jCursor B / C to display “Clear

Preset” and press jENTER.

Use jCursor B / C to select the preset

number you want to clear, and press

jENTER to clear it.

Press qOPTION to finish this operation.

TUNER

ePRESET F / G

jCursor B / C

jENTER

jRETURN

lNumeric keys

qOPTION

OPTION

RETURN

TUNER

PRESET

ENTER

7856

1234

ENT

L TV

NPUT

RECEIVER

ENE

ENHAN

TRAI

DMI

UDI

TRAN

LEE

-A

NIN

TERE

RADI

P-

DISPLA

SOU

[

]

[

]

Press jRETURN to cancel the operation.

SL SR

01:FM98.50MHz

CLEAR

VOL.

The number of the preset to be cleared

Blinks Registered frequencies

Repeat this operation to clear the registration of

multiple numbers.

1 : Preset numbers to which no stations are registered will be

skipped. “No Presets” or “No Presets in Memory” is displayed

when there are no stations are registered.

2 : To select a station by selecting a preset number, use the

lNumeric keys to enter the preset number of the station you

wish listen to. When an invalid number is entered, “Wrong Num.”

appears on the front panel display. Check that you have entered

the correct number.

3 : See the section on “Configuring the settings specific for each

input source (Option menu)” for details on the Option menu

(☞

p. 39).

En 34

PLAYBACK

FM/AM tuning

■

Combining the video signals and

radio audio signals

Select the video signal to be output from the video

output jack on this unit when TUNER is selected as the

input source. For example, when watching the sports

relay on the TV, only audio can be switched to the radio

audio.

Press dTUNER to switch to the tuner input.

Press qOPTION to display the Option

menu. J1

Use jCursor B / C to display “Video Out”

and press jENTER.

Use jCursor D / E to select the video

source you want to watch, and press

jENTER.

Selectable video source:

Press qOPTION to finish this operation.

TUNER

jCursor B / C / D / E

jENTER

qOPTION

OPTION

TUNER

ENTER

ENT

TV V

L TV

NPUT

RECEIVER

ENE

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

V-A

NIN

VIE M

TERE

RADI

P-

PLA

SOU

[

]

[

]

Volume Trim

OPTION

VOL.

Video Out

OPTION

VOL.

SL SR

Video;;;;HDMI1

TUNER

VOL.

HDMI1-4 Video signals input from one of the

HDMI1 to 4 are output from the HDMI

output jack on this unit.

AV1-2 Video signals input from either one of the

AV1 and AV2 are output from the

component output jack on this unit.

AV3-5,

V-AUX

Video signals input from one of the AV3

to AV5 and VIDEO AUX are output from

the composite output jack on this unit.

Off Video signals are not output when

TUNER is selected as the input source.

1 : See the section on “Configuring the settings specific for each

input source (Option menu)” for details on the Option menu

(☞

p. 39).

En 35

PLAYBACK

Once you have connected a Yamaha iPod universal dock (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote

control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound field programs (☞

p. 29) to give

compressed audio formats such as MP3 a sharper, more dynamic sound.

Connecting the Yamaha iPod

universal dock

Use the dedicated cable to connect the dock to the

DOCK jack on the rear panel of this unit. Refer to the

operating instructions of the iPod universal dock for

information on how to connect your iPod/iPhone.

Switch the power on and place your iPod/iPhone in the

dock. The unit is now ready for playback.

Controlling an iPod/iPhone

After setting your iPod/iPhone in your dock, just press

dDOCK to switch to DOCK input and you can operate

your iPod/iPhone.

You can use the remote control of this unit to carry out

basic operations (playback, stop, skip etc) on your iPod/

iPhone. You can check song information on the iPod/

iPhone screen.

Playing back tunes from your iPod™/iPhone™

• iPhone 4, iPhone 3GS, iPhone 3G, iPhone, iPod touch (1st, 2nd, 3rd, and 4th generation), iPod (4th, and 5th generation, and Classic), iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th

generation) and iPod mini are supported (As of October 2010).

• When connecting an iPhone, please use a YDS-12.

• Some features may not be compatible depending on the model or the software version of your iPod.

• Some functions may not be available for some Yamaha iPod universal dock models. This explanation focuses on the YDS-12.

dDOCK

jCursor B / C / D / E

jENTER

k b

ENTER

DOCK

ENT

V V

NPUT

RECEIVER

ENE

PTI

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

V-A

TUNER

NIN

VIE M

TERE

RADI

TOP

P-

PLA

SOU

[

]

[

]

CAUTION

To prevent accidents, place this unit in standby mode

before connecting an iPod universal dock.

VIDE

PTI

NENT

VIDE

ONITOR OUT

HDMI

OUT

Yamaha iPod universal dock

SL SR

iPodconnected

VOL.

dDOCK Switches to the DOCK (iPod) input.

jCursor B / C J1

Move the cursor up and down to different

fields.

jCursor D / E J1

Returns to the previous menu or enter the

menu you have selected.

jENTER J1 Enters the selected menu.

k w Searches backwards while held down.

k f Searches forwards while held down.

k b

Skips to the beginning of the currently

playing song. Pressing repeatedly skips

one song backwards with each press.

k a Skips to the beginning of the next song.

k s Stops playback.

k e Switches between playback and pause.

k p Switches between playback and pause.

1 : These keys may not work for some types of iPod. In this case,

carry out these operations directly with your iPod.

En 36

PLAYBACK

Playing back tunes from your iPod™/iPhone™

dDOCK

jCursor B / C / D / E

jENTER

qOPTION

OPTION

ENTER

DOCK

ENT

TV V

L TV

NPUT

RECEIVER

ENE

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

V-A

TUNER

NIN

VIE M

TERE

RADI

P-

PLA

SOU

[

]

[

]

■ To charge the iPod/iPhone when this unit

is in standby mode

If you connect an iPod/iPhone to the iPod universal

dock the iPod/iPhone will always charge when this

unit is turned on.

This unit can charge an iPod/iPhone even when in

standby mode (iPod Standby Charge function).

Check the iPod CHARGE indicator ( )

on the front panel display of this unit to check

whether this unit is charging an iPod/iPhone while in

standby mode. While charging an iPod/iPhone, the

iPod charge indicator lights. The indicator goes out

when charging is finished.

If necessary, you can also deactivate the iPod Standby

Charge function.

Press dDOCK to switch to the DOCK

input.

Press qOPTION to display the Option

menu.

Use jCursor B / C to display “Standby

Charge” and press jENTER.

Use jCursor D / E to switch the setting

to “Off.”

When setting is completed, press

qOPTION to close the Option menu.

To re-activate the Standby Charge function carry out

this procedure again and change the “Standby

Charge” setting back to “On.”

iPod

CHARGE

SL SR

Charge;;;;;;On

DOCK

VOL.

En 37

PLAYBACK

You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible

portable music players. J1

Connecting a Yamaha Bluetooth

wireless audio receiver

Use the dedicated cable to connect the dock to the

DOCK jack on the rear panel of this unit.

The Bluetooth wireless audio receiver connection will be

complete when this unit is turned on.

Pairing Bluetooth™ components

Be sure to carry out pairing when connecting a Bluetooth

component for the first time, or when settings have been

deleted.

Refer to the operating instructions of your Bluetooth

component as necessary when carrying out pairing.

Press dDOCK to switch to the DOCK input.

Turn on the Bluetooth component you want

to pair with and set it to pairing mode.

Press qOPTION to display the Option menu

and use jCursor B / C to select “Pairing.”

Press jENTER to start pairing.

Make sure the Bluetooth component

recognizes the Bluetooth wireless audio

receiver.

When the device is recognized it will appear in the

Bluetooth component list, for example as “YBA-10

YAMAHA.”

Select the Bluetooth wireless audio receiver

from the Bluetooth component list, and

enter a pass key “0000” into the Bluetooth

component.

Playing back tunes from Bluetooth™ components

NOTE

When playing back from a Bluetooth component for the first time, you must first pair the devices (register the Bluetooth components). When establishing a wireless connection

you must carry out pairing on both this unit and on the Bluetooth component.

dDOCK

eMEMORY

jCursor B / C

jENTER

jRETURN

qOPTION

OPTION

RETURN

MEMORY

ENTER

DOCK

ENT

V V

NPUT

RECEIVER

ENE

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

V-A

TUNER

NIN

VIE M

TERE

RADI

TOP

P-

PLA

SOU

[

]

[

]

CAUTION

To prevent accidents, place this unit in standby mode

before connecting a Bluetooth wireless audio receiver.

VIDE

PTI

NENT

VIDE

ONITOR OUT

HDMI

OUT

Yamaha Bluetooth

wireless audio receiver

The Yamaha Bluetooth wireless audio receiver can be

paired with up to eight Bluetooth components. When

the ninth device is paired, the pairing settings for the

device which has not been used for the longest period

of time will be deleted.

SL SR

Pairing

OPTION

VOL .

• To cancel pairing, press jRETURN.

• You can also press and hold

eMEMORY on the front

panel to begin pairing.

SL SR

Searching...

DOCK

VOL .

SL SR

Completed

DOCK

VOL .

When pairing occurs correctly

1 : This unit supports A2DP (Advanced Audio Distribution Profile)

of the Bluetooth profile.

En 38

PLAYBACK

Playing back tunes from Bluetooth™ components

Using Bluetooth™ components

When pairing is complete, carry out the following

procedure to achieve a wireless connection between this

unit and the Bluetooth component. When the wireless

connection is complete, you playback from Bluetooth

components.

Press dDOCK to switch to the DOCK input.

Press qOPTION to display the Option

menu.

Use jCursor B / C to select “Connect” and

press jENTER. J1

Operate the Bluetooth component for

playback.

DOCK

jCursor B / C

jENTER

qOPTION

OPTION

ENTER

DOCK

ENT

TV V

L TV

NPUT

RECEIVER

ENE

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

V-A

TUNER

NIN

VIE M

TERE

RADI

P-

PLA

SOU

[

]

[

]

Depending on Bluetooth components, a wireless

connection is established automatically or by

operating the Bluetooth components. In that case, it is

not necessary to carry out the following procedure.

“Not found” is displayed when there is an error

connecting. Check that the following conditions have

been satisfied, and try to establish a wireless

connection again.

• Both this unit and the Bluetooth component are paired.

• The Bluetooth component is switched on.

• The Bluetooth component is within 32 feet (10 meters)

of the Bluetooth wireless audio receiver.

To disconnect a wireless connection, repeat the same

steps, and in step 3, select “Disconnect.”

SL SR

BTconnected

VOL.

When wireless connection is complete

1 : “Disconnect” is displayed while a Bluetooth component has been

connected.

En 39

SETUP

This receiver has a unique option menu specific for each type of input source, such as volume trim for compatible input sources, audio/video data display for signals from

external devices, and other frequently used menu items.

Option menu display and setup

Use the dInput selector on the remote

control to select the Option menu you wish

to display.

Press qOPTION.

The Option menu appears for the desired input source.

Select the desired control/setup item using

jCursor B / C and press jENTER.

The displayed Option menu items differ depending on

the input source.

For details, read the following Option menu items

section.

Select the desired menu item (or enable a

function) using jCursor B / C / D / E and

jENTER.

Parameters of the selected item are displayed. The

parameters you can set differ depending on the menu

items.

To close the Option menu, press qOPTION.

Option menu items

The following items are provided for each input source. “✓” indicates the available menu for each input source.

Configuring the settings specific for each input source (Option menu)

dInput selector

jCursor B / C / D / E

jENTER

jRETURN

qOPTION

OPTION

RETURN

HDMI

AUDIO

1234

125

V-AUX

TUNER

ENTER

DOCK

V CH

NPUT

RECEIVER

ENE

NHAN

TRAI

TRAN

LEE

NIN

TERE

RADI

P-

DISPLA

SOU

[

]

[

]

SL SR

VolumeTrim

OPTION

VOL .

Option menu

• You can also use jRETURN to return to the previous

screen or close the Option menu.

• Certain selected menu items may automatically close

the Option menu when their functions are enabled.

For a few seconds after closing the Option menu, the

remote control keys may not function. If this occurs,

reselect the input source.

Vol u me Tr im Audio In Signal Info FM Mode Auto Preset Clear Preset Video Out Standby Charge Connect/Disconnect Pairing

HDMI1-4 ✓✓✓

AV1-2 ✓✓✓

AV3-4 ✓✓

AV5 ✓

AUDIO1-2 ✓

V-AUX ✓

TUNER ✓✓✓✓✓

iPod (DOCK) ✓ ✓

Bluetooth (DOCK) ✓ ✓✓

En 40

SETUP

Configuring the settings specific for each input source (Option menu)

■

Adjusting volume between input sources

Input source: All

Reduces any change in volume when switching between input

sources by correcting volume differences in each input source. You

can adjust this parameter for each input source.

■

Combining HDMI/AV1-2 input source

video and audio

Input source: HDMI1-4, AV1-2

Combines video from HDMI or AV input sources with analog/

digital audio inputs in situations such as:

– an external device is connected with an HDMI cable but cannot

transmit audio through HDMI

– an external device with component video output and analog audio

output (such as certain game consoles) are connected to the

system

To change assignments, select an input source (HDMI1-4 or AV1-2)

as the video input first, and then select audio input jacks in this

menu.

Set as follows according on the desired combination of audio input

jacks.

■

Displaying information on audio/video

signals

Input source: HDMI1-4, AV1-4 J1

Displays information on digital audio and video signals on the

front panel display. You can display the signal information by

pressing jENTER on the menu item and using jCursor B / C.

Audio information

Video information

Volume Trim

Adjustable range -6.0 dB to 0.0 dB to +6.0 dB

Default setting 0.0 dB

Adjustment

increments

0.5 dB steps

Audio In

SL SR

Audio;;;;;;AV1

HDMI1

VOL.

Assignable audio input jacks

Inputs that change the audio source

Audio inputs Settings method

Optical digital audio

input

Select AV1 or AV4. Connect the external component

audio cable to the optical jack for the selected input.

Coaxial digital audio

input

Select AV2 or AV3. Connect the external component

audio cable to the coaxial jack for the selected input.

Analog audio input Select one of AV5, AUDIO1, or AUDIO2. Connect

the external component audio cable to the audio jack

for the selected input.

• For details of settings, refer to “Receiving audio from other input

sources” (☞

p. 15) and “Component connections to analog audio

output devices” (☞

p. 16).

• To return audio inputs to their previous settings, display this item

again, and select the original input jack.

Signal Info

SL SR

DolbyD

FORMAT

VOL .

Menu item

Information

FORMAT Format of audio signals.

CHAN The number of input signal channels (front/surround/

LFE).

For example, if input signal channels are 3 front

channels, 2 surrounds and LFE, “3/2/0.1” is

displayed.

If a channel that cannot be expressed as the above is

input, a total number of channels such as “5.1ch” may

be displayed.

SAMPL The sampling frequency of analog-to-digital

conversion.

B RATE The bit rate of input signal per second.

V IN Format and resolution of video input signal.

V OUT Format and resolution of video output signal.

V.MSG

(appears only

when an error

has occurred)

Error messages about HDMI signals and components.

Error message

HDCP Error HDCP authentication failed.

Device Over The number of connected HDMI

components is over the limit.

• “No Signal” is displayed when no signals are being received, and

“---” is displayed if this unit cannot recognize the incoming

signal.

• The bit rate may vary during playback.

1 : AV5 or AUDIO1-2 are also available when the “Audio Return Channel”

function is on, and the source is used for the TV audio input (TVAudio).

En 41

SETUP

Configuring the settings specific for each input source (Option menu)

■

Changing FM mode (Stereo/Monaural)

Input source: TUNER

Sets this unit to automatically match FM broadcast frequencies in

stereo, or to convert the frequency to monaural (☞

p. 31).

■

Automatically presetting FM radio

stations

Input source: TUNER

Automatically detects radio stations in the FM frequency and

registers them as preset stations (☞

p. 31).

■

Clearing preset FM stations

Input source: TUNER

Clears the preset stations (☞p. 33).

■

Combining the video signals and radio

audio signals

Input source: TUNER

Select the type of video signals to be output from the video output

jack on this unit when TUNER is selected as the input source

(☞

p. 34).

■

Charging an iPod™/iPhone™ in standby

mode

Input source: iPod (DOCK)

Charges an iPod/iPhone stationed in the iPod universal dock while

the receiver is in standby mode (☞

p. 36).

■

Bluetooth™ wireless connections

Input source: Bluetooth (DOCK)

Enables/disables the Bluetooth wireless connection (☞p. 38).

Select “Connect” to establish the wireless connection. Select

“Disconnect” to disable the wireless connection.

■

Pairing the Bluetooth™ wireless audio

receiver and your Bluetooth component

Input source: Bluetooth (DOCK)

Pairs your Bluetooth wireless device and this receiver (☞p. 37).

FM Mode

Auto Preset

Clear Preset

Video Out

Standby Charge

Connect

Disconnect

Pairing

En 42

SETUP

You can configure various function settings of this unit using the Setup menu.

Setup menu display and settings

Press iSETUP on the remote control.

Use the jCursor B / C to select the desired

menu and press jENTER.

Setup menu categories

Ex: Sound Setup menu

Use jCursor B / C to navigate the

submenus to find the desired setting and

press jENTER.

When multiple items appear, use jCursor

B / C to select the desired item.

Press jCursor D / E to change the setting.

You can change other items by repeating step 4 and 5.

Press iSETUP to exit the Setup menu.

Setup menu items

Setup menu

Setting various functions (Setup menu)

iSETUP

jCursor B / C / D / E

jENTER

jRETURN

SETUP

RETURN

ENTER

ENT

TV V

L TV

NPUT

RECEIVER

ENE

PTI

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

MIT

LEE

V-A

TUNER

NIN

MUS

TERE

ADI

P-

PLAY

SOU

OCK

[

]

[

]

Speaker Setup Manages settings for speakers.

Sound Setup Manages settings for audio output.

Func. Setup Manages settings to make receiver

operation easier, such as input source

labeling and auto-standby functions.

HDMI Setup Manages settings for HDMI, such as

HDMI Control functions.

DSP Parameter Sets parameters for sound field programs.

Memory Guard Protects settings against accidental

alteration.

SL SR

SpeakerSetup

SETUP

VOL .

SL SR

Lipsync

SOUND

VOL.

You can also use jRETURN to return to the

previous screen.

For a few seconds after closing the Setup menu, the

remote control keys may not function. If this occurs,

reselect the input source.

SL SR

Audio;;;;;;Amp

HDMI

VOL.

Config

Level

Distance

Equalizer

Test Tone

Speaker Setup

Sound Setup

HDMI Setup

Func. Setup

DSP Parameter

Memory Guard

Subwoofer

Front

Center

Sur. LR

Crossover

SWFR Phase

Extra Bass

HDMI Auto

Auto

Manual

Lipsync

Adaptive DRC

D.Range

Max Volume

Init.Volume

Control

TVAudio

ARC

Audio

Input Rename

AutoPowerDown

Dimmer

(speakers)

(unit and speakers)

(speakers and frequency

bands)

En 43

SETUP

Setting various functions (Setup menu)

Manages settings for speakers

Speaker Setup submenu

■

Manual speaker setup

Adjusts the output characteristics of the speakers based on

manually set parameters.

Subwoofer

Confirms the subwoofer.

Front

Selects the size (sound reproduction capacity) of the front

speakers. J2

Center

Selects the size of the center speakers.

Sur. LR

Selects the size of the surround speakers.

Config Manually manages speaker configuration, such as

speaker size (sound production capacity), and bass

audio processing.

Level Manually adjusts the volume of each speaker.

Distance Manually adjusts the output of each speaker based on

distance to the listening point.

Equalizer Selects an equalizer to adjust speaker output

characteristics.

Test Tone Generates test tones.

SL SR

SpeakerSetup

SETUP

VOL .

Config

In the Config submenu, you can select the speaker size

characteristic (Large or Small). Select the size (sound

reproduction capacity) that matches your speakers.

When speaker size is set to “Small,” low-frequency components

of the speakers that you configured are produced from the

subwoofer (or from the front speakers if there is no subwoofer).

Yes (Default) Select this when you have a subwoofer connected.

During playback, the subwoofer will produce audio

from the LFE (low-frequency effect) channel and bass

audio from other channels. J1

None Select this when you do not have a subwoofer

connected. The front speakers will produce audio

from the LFE (low-frequency effect) channel and bass

frequency audio from other channels.

Woofer diameter

• 16 cm or larger → Large

• 16 cm or smaller → Small

Small (Default) Select this for small speakers. The subwoofer will

produce front channel low-frequency

components. J3

Large Select this for large speakers. The front speakers will

produce all of the front channel frequency

components.

None Select this when there is no center speaker. The front

speakers will produce center channel audio.

Small (Default) Select this when a small center speaker is connected.

Large Select this when a large center speaker is connected.

None Select this when no surround speakers are connected.

The front speakers will produce surround channel

audio signals.

Small (Default) Select this when the surround speakers are small.

Large Select this when the surround speakers are large.

1 : Enabling the “Extra Bass” setting allows both the subwoofer and the front

speakers to produce bass audio.

2 : When “Subwoofer” is set to “None,” you can only choose “Large.” If the front

speaker setting is “Small” and you change “Subwoofer” to “None,” it will

automatically change to “Large.”

3 : Enabling the “Crossover” setting allows you to set the frequency components

of audio signals transmitted from the front speakers to the subwoofer.

En 44

SETUP

Setting various functions (Setup menu)

Crossover

Sets the lower limit of low-frequency component output from

speakers set to “Small.”

Audio with a frequency below that limit will be produced from the

subwoofer or the front speakers. J1

SWFR Phase

Sets the phase of the subwoofer if the bass audio is lacking or

unclear.

Extra Bass

Allows the front channel low-frequency components to be

produced exclusively by the subwoofer, or by both the subwoofer

and the front speakers.

■

Controlling the volume of each speaker

Separately adjusts the volume of each speaker. Use jCursor B /

C to select the desired speaker and adjust the volume with

jCursor D / E.

■

Manually setting speaker distance

Adjusts the timing at which the speakers produce audio so that

sounds from the speakers reach the listening position at the same

time.

Selecting adjustment units

Use jCursor B / C to display “Unit,” and then use jCursor D

/ E to choose the units of length (meters or feet).

Setting distances for each speaker

Use jCursor B / C to display the speaker you want to configure,

and then use jCursor D / E to set the distance from the speaker

to your listening position.

40Hz 110Hz

60Hz 120Hz

80Hz (Default) 160Hz

90Hz 200Hz

100Hz

NRM (Default) Does not change the subwoofer phase.

REV Reverses the subwoofer phase.

Off (Default) Depending on the size of the front speakers, either the

front speakers or the subwoofer produce the front

channel low-frequency components.

On The subwoofer and the front speakers produce the

front channel low-frequency components.

When the “Subwoofer” is set to “None,” the “Extra Bass”

setting is disabled.

Level

FL Front speaker L

FR Front speaker R

C Center speaker

SL Surround speaker L

SR Surround speaker R

SWFR Subwoofer

Adjustable range -10.0 dB to +10.0 dB

Default setting 0 dB (FL / FR / SWFR)

-1.0 dB (C / SL / SR)

Adjustment

increments

0.5 dB

Distance

Unit Selects the distance unit (meters or feet).

Front L Front speaker L

Front R Front speaker R

Center Center speaker

Sur. L Surround speaker L

Sur. R Surround speaker R

SWFR Subwoofer

Adjustable range 0.30 m to 24.0 m (1.0 ft to 80.0 ft)

Default setting 3.00 m (10.0 ft) (Front L/Front R/SWFR)

2.60 m (8.5 ft) (Center)

2.40 m (8.0 ft) (Sur. L/Sur. R)

Adjustment

increments

0.10 m (0.5 ft)

1 : If your subwoofer has a volume control or a crossover frequency control, set

the crossover frequency to maximum and the volume to half (or slightly less).

En 45

SETUP

Setting various functions (Setup menu)

■

Adjusting sound quality with the equalizer

Adjusts sound quality of tone using a parametric or graphic

equalizer.

EQ Select

Select an equalizer type.

■

Generating test tones

Turns the test tone generator on or off.

Equalizer

PEQ Uses the parametric equalizer to adjust sound quality.

Selecting this setting applies the tone settings

obtained using YPAO (☞p. 21). J1

GEQ (Default) Uses the graphic equalizer to adjust sound quality. By

pressing jENTER, you can adjust the

characteristics of the graphic equalizer.

Off Does not activate the equalizer.

■ Adjusting the graphic equalizer

When “EQ Select” is displayed, use jCursor D / E

to select “GEQ” and press jENTER.

Check that “Channel” appears and use jCursor

D / E to select the speaker for which you want to

adjust the equalizer.

SL SR

Channel;FRNT L

GEQ

VOL.

The speaker you are adjusting

Press jCursor C repeatedly to select the

frequency you want to adjust, then use jCursor D

/ E to adjust the volume.

Raising volume: Press jCursor E.

Lowering volume: Press

jCursor D.

When you have finished making adjustments,

press iSETUP to close the Setup menu.

SL SR

63Hz

GEQ

VOL.

Frequency band Setting the volume level for

the selected frequency

Frequency

range

63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/

16 kHz

Adjustable

range

-6.0 dB to +6.0 dB

Default setting 0 dB

Adjustment

increments

0.5 dB

You can use jCursor B / C to select another frequency or

return to step 2. Repeat steps 2-3 to adjust the tone to your

liking.

Test Tone

Off (Default) Does not generate test tones.

On Generates test tones. While “On” is selected, test

tones are produced constantly.

You can use the test tone in a variety of circumstances. For

example, you can adjust the volume balance settings for each

speaker, or whenever you adjust the settings on the internal

graphic equalizer, you can listen to the actual effect while

operating this unit. Turn the test tone off when you have finished

making adjustments.

1 : Using YPAO to carry out acoustic measurement selects “PEQ” automatically.

“PEQ” does not appear if the measurement process has not been carried out at

least once.

En 46

SETUP

Setting various functions (Setup menu)

Setting the audio output function of this

unit

Sound Setup submenu

■

Synchronizing audio/video output

Adjusts the delay between audio and video output (Lipsync

function).

HDMI Auto

When connecting to a TV via HDMI, automatically adjusts output

timing if the TV supports an automatic lipsync function.

Auto

Fine-adjust the audio output timing by entering the correction time

provided when “HDMI Auto” is set to “On.”

Manual

Manually adjusts the correction time. Select this when the TV does

not support the automatic lipsync function or “HDMI Auto” is set

to “Off.”

■

Auto-adjusting the sound level to make

even low volumes more audible

Adjusts the dynamic range in conjunction with the volume level

(from minimum to maximum). When you play audio at night or at

low volumes, it is a good idea to set parameter to “On.” J1

When the auto function is enabled, it adjusts the dynamic range as

follows.

Lipsync Adjusts the delay between video and audio output.

Adaptive DRC Auto-adjusting the sound level to make even low

volumes more audible.

D.Range Selects the dynamic range adjustment method for

digital audio playback.

Max Volume Sets the maximum volume for this receiver.

Init.Volume Sets the initial volume for when this receiver is turned

on.

SL SR

SoundSetup

SETUP

VOL .

Lipsync

Off Select this when the connected TV does not support

the automatic lipsync function or you do not wish to

use the automatic lipsync function. Set the correction

time in “Manual.”

On (Default) Select this when the TV supports the automatic

lipsync function. Fine-adjust the correction time in

“Auto.”

Adjustable range 0 ms to 240 ms

Adjustment

increments

1 ms

Adjustable range 0 ms to 240 ms

Adjustment

increments

1 ms

Default setting 0 ms

Adaptive DRC

Off (Default) Does not adjust the dynamic range automatically.

On Adjusts the dynamic range automatically.

Off

Input Level Input Level

Volume: low Volume: high

Output Level

1 : The Adaptive DRC setting is also effective when you use headphones.

En 47

SETUP

Setting various functions (Setup menu)

■

Auto-adjusting Dolby Digital and DTS

dynamic range

Selects the dynamic range adjustment method for audio bitstream

(Dolby Digital and DTS) playback.

■

Setting the maximum volume

Sets a maximum volume level so that the audio is not played too

loudly. The default setting of +16.5 dB produces the highest

volume.

■

Setting the startup volume

Sets the initial volume for when this receiver is turned on. When

this parameter is set to “Off,” the volume is set at the level when the

receiver last entered standby mode. J1

Setting HDMI functions

HDMI Setup submenu

D.Range

Min/Auto (Min) Sets the dynamic range suitable for low volume

or a quiet environment, such as at night, for bitstream

signals except for Dolby TrueHD signals.

(Auto) Adjusts the dynamic range for Dolby TrueHD

signals based on input signal information.

Std Adjusts the dynamic range for optimum volume for

regular home use.

Max (Default) Produces audio without adjusting the dynamic range.

Max Volume

Adjustable range -30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)

Default setting +16.5 dB

Adjustment

increments

5.0 dB

Init.Volume

Adjustable range Off, Mute, -80 dB to +16.5 dB

Default setting Off

Adjustment

increments

0.5 dB

Control Turns the HDMI Control on or off.

TVAudio J2 Chooses automatically selected audio input in

conjunction with TV operation when the HDMI

Control is turned on.

ARC J2 Transmits audio/video output to the TV and audio

input from the TV through a single HDMI cable.

Audio J2 Selects the audio output device connected to this

unit via HDMI jacks.

SWSW

SL SR

HDMISetup

SETUP

VOL.

1 : When you set the “Max Volume” at a lower level than “Init.Volume,” the “Max

Volume” setting has priority.

2 : When “Control” is set to On, “TVAudio” and “ARC” appear. When “Control”

is set to Off, “Audio” appears.

En 48

SETUP

Setting various functions (Setup menu)

■

Receiver operation via TV (HDMI Control)

Set the HDMI Control function to “On” to operate devices

connected via HDMI. If the TV or other external components

support HDMI Control (ex. Panasonic VIERA Link), you can use

the remote controls of those devices to operate some of this unit’s

functions, and to synchronize this unit with the operation of those

devices.

Please refer to “Switching the input source on this unit

automatically when listening to TV audio” (☞

p. 59) for

instructions.

■

Selecting an input source to assign audio

input for the TV

Select the input source that matches operations carried out on the

TV while the HDMI Control function is on.

When using a TV that supports Audio Return Channel function and

the function is enabled, the audio input for the TV is assigned to

the input source selected here. J1

■

Listening to TV audio via single HDMI

cable (Audio Return Channel)

You can enable or disable the Audio Return Channel function.

When using a TV that supports Audio Return Channel function and

the function is enabled, the TV’s audio output is transmit to this

unit via an HDMI cable.

The TV audio input to this unit is regarded as the input source

selected in “TVAudio.” J1

By means of this function, you do not need to connect the TV’s

audio output (digital audio output or analog audio output) to the

unit.

When the TV audio is input to the unit using Audio Return

Channel, “TV” is displayed on the front panel display.

■

Changing the output destination of HDMI

input audio signals

Choose whether to playback audio from an external component

such as a BD/DVD player connected via HDMI through this unit or

through a TV.

Control

Off (Default) Sets HDMI Control to “Off.”

On Sets HDMI Control to “On.”

If this unit is connected to HDMI devices that do not support the

HDMI Control function, these functions will not operate.

TVAudio

AV1 to AV5 Assigns any of the AV1-5 input source for the audio

input from the TV.

AUDIO1/AUDIO2 Assigns AUDIO1 or AUDIO2 input source for the

audio input from the TV.

Default setting AV 4

• “TVAudio” is only displayed with the HDMI Control function

(Control) is set to “On.”

• Please refer to “Using the HDMI Control function” (☞

p. 58) for

setting instructions.

• For details on inputting the audio signal from the TV, refer to

“Listening to TV audio” (☞

p. 14).

ARC

Off (Default) Sets the Audio Return Channel to “Off.”

On Sets the Audio Return Channel to “On.”

• “ARC” is only displayed with the HDMI Control function

(Control) is set to “On.”

• Please refer to “Single HDMI cable input to TV audio with Audio

Return Channel function” (☞

p. 60) for setting instructions.

SL SR

AV4

VOL.

Audio

Amp (Default) Outputs audio through this unit only. When this

setting is selected, the external component outputs an

audio format compatible with this unit.

TV Outputs audio through a TV only. When this setting is

selected, the external component outputs an audio

format compatible with the TV. J2

Amp+TV Outputs audio from the TV and this unit. When this

setting is selected, the external component outputs an

audio format compatible with TV.

“Audio” is only displayed with the HDMI Control function

(Control) is set to “Off.”

1 : While the Audio Return Channel function is on, the jack selected for the input

source cannot be used.

2 : When “TV” is selected, the speakers of this unit do not output sound.

En 49

SETUP

Setting various functions (Setup menu)

Making the receiver easier to use

Func. Setup submenu

■

Changing input source names

Changes the input source names to be shown on the front

panel display.

You can change an input source name by choosing from

a list of templates, or make one of your own.

SETUP

RETURN

ENTER

ENT

TV V

L TV

NPUT

RECEIVER

ENE

PTI

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

MIT

LEE

V-A

TUNER

NIN

MUS

TERE

ADI

P-

PLAY

SOU

OCK

[

]

[

]

iSETUP

jCursor B / C / D / E

jENTER

jRETURN

Input Rename Changes the input source names.

AutoPowerDown Goes into standby mode.

Dimmer Sets the Brightness of the front panel

display.

Input Rename

■ Selecting a template

Select “Input Rename” from the Setup

menu and press jENTER.

Select the input source that you want to

rename using jCursor B / C.

SL SR

Func.Setup

SETUP

VOL .

SL SR

HDMI1

HDMI1

VOL .

Renaming the input source

Use jCursor D / E to select a new name

from the following templates.

Confirm the new display name by

pressing jRETURN. Press iSETUP to

exit the Setup menu.

To cancel a name change, select the original name

and then press

jRETURN to exit renaming.

■ Entering an original name

Select “Input Rename” from the Setup

menu and press jENTER.

Select the input source that you want to

rename using jCursor B / C.

Blu-ray Satellite

DVD VCR

SetTopBox Tape

Game MD

TV PC

DVR iPod

CD HD DVD

CD-R (blank)

SL SR

Blu-ray

HDMI1

VOL.

Press jENTER.

Use jCursor B / C to select the

characters you wish to change, and use

jCursor D / E to enter those characters.

The following characters are available for input

source.

• A to Z, a to z

• 0 to 9

• Symbols (#, *, -, +, etc.)

• Space

Repeat step 4 until you have entered the

new input source name.

Confirm the new display name by

pressing jENTER. Press iSETUP to

exit the Setup menu.

To cancel a name change, press jRETURN.

SL SR

HDMI1

HDMI1

VOL .

Cursor

SL SR

YAMAHABD

HDMI1

VOL.

En 50

SETUP

Setting various functions (Setup menu)

■

Goes enter standby mode automatically

when you leave it without operating

If you do not operate this unit or use the remote control for an

extended period of time, it will automatically go into standby mode

(Auto Power Down function). This function’s default setting is

“Off.” When you wish to activate this function, set the amount of

time to pass before this unit will enter standby.

■

Setting the brightness of the front panel

display

Sets the brightness of the front panel display. Lowering the setting

dims the display.

Setting sound field program parameters

You can set the parameters for the sound field programs (☞p. 51).

Prohibiting setting changes

Prohibits setting changes to prevent careless changes being made

to the settings on Setup menu.

AutoPowerDown

Off (Default) Auto Power Down function is disabled.

4hours Goes into standby mode, when you have not operated

this unit for four hours.

8hours Goes into standby mode, when you have not operated

this unit for eight hours.

12hours Goes into standby mode, when you have not operated

this unit for twelve hours.

This unit starts a countdown of 30 seconds before entering the

standby mode. Pressing any key of the remote control during the

countdown cancels entering the standby mode and reset the

timer.

Dimmer

Adjustable range -4 to 0

Default setting 0

Off (Default) Settings are not protected.

On Prohibits changes to the settings on Setup menu until

it is returned to “Off.”

While set to “On,” the unit displays “Memory

Guard!” when an attempt is made to change the

settings.

SL SR

DSPParameter

SETUP

VOL .

SL SR

Memory Guard

SETUP

VOL .

En 51

SETUP

Although the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters).

To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations.

Setting sound field parameters

Press iSETUP to display the Setup menu.

Use jCursor B / C to select “DSP

Parameter” and press jENTER.

Use jCursor D / E to choose the sound

field program you want to edit.

Press jCursor B / C to select the

parameter that you want to change, and

press jCursor D / E to change the

parameter.

Once you have completed editing, press

iSETUP to close the Setup menu.

■

CINEMA DSP parameters

Change the effect level (level of the sound field effect to

be added). You can adjust the level of the sound field

effect while checking the sound effect.

Setting sound field program parameters

iSETUP

jCursor B / C / D / E

jENTER

SETUP

ENTER

ENT

TV V

L TV

NPUT

RECEIVER

ENE

PTI

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

V-A

TUNER

NIN

VIE M

TERE

RADI

P-

PLA

SOU

[

]

[

]

SL SR

DSPParameter

SETUP

VOL.

SL SR

Sci-Fi

DSPPRM

VOL .

Sound field program to be edited

When there are multiple parameters in the sound field

program you are configuring, repeat step 4 as

necessary to change other parameters.

■ To initialize the sound field parameters

To set the parameters of the sound field program back

to default, press jCursor C repeatedly during

editing to select “Initialize” and press jCursor E.

When “Press Again >” is displayed, press jCursor

E again to initialize.

To cancel operations, press jCursor D when “Press

Again” appears and return to the original display.

SL SR

DSPLevel;;0dB

DSPPRM

VOL .

Sound field parameter Choices

SL SR

Initialize

DSPPRM

VOL .

DSP Level

Adjustable range -6 dB to 0 dB to +3 dB

Default setting 0 dB

Adjust “DSP Level” as follows:

• The effect sound is too soft.

• There are no differences between effects of the sound

field programs.

→ Increase the effect level.

• The sound is dull.

• The sound field effect is added too much.

→ Reduce the effect level.

En 52

SETUP

Setting sound field program parameters

■

Parameters usable in certain sound field

programs

2ch Stereo only

Automatically bypasses the DSP circuit and tone control circuit

depending on the condition of tone control etc., when an analog

sound source is played back. You can enjoy a higher quality sound.

5ch Stereo only

Adjusts the center channel volume. J1

Adjusts the volume of the surround L channel. J1

Adjusts the volume of the surround R channel. J1

Straight Enhancer/5ch Enhancer only

Adjusts the effect level of the compressed music enhancer mode.

■

Parameters usable in surround decoder

q PLII Music only

Adjusts the soundscape of the front sound field. Sends front left/

right channels sounds to the surround speakers as well as the front

speakers for a wraparound effect.

Spreads the center channel sound to the front left and right

speakers to suit your needs or preferences. Set this parameter to 0

for outputting the center sound from the center speaker only, or to 7

for outputting it from the front left/right speaker only.

Adjusts the difference in level between the front sound field and

the surround sound field. You can adjust the difference in level

created by the software being played back to obtain the preferred

sound balance.

The surround sound gets stronger as you make the value more

negative, and the front sound gets stronger as you make the value

more positive.

When Neo:6 Music is selected

Adjusts the front left and right channel output relative to the center

channel to make the center channel more or less dominant as

necessary.

Direct

Auto (Default) Outputs sound by bypassing the DSP circuit and tone

control circuit when both tone controls of “Bass” and

“Treble” are set to 0dB.

Off Does not bypass the DSP circuit and tone control

circuit.

CT Level

Adjustable range 0 to 100%

Default setting 100%

SL Level

Adjustable range 0 to 100%

Default setting 100%

SR Level

Adjustable range 0 to 100%

Default setting 100%

EFCT LVL

High (Default) Standard effect.

Low Sets when the high-frequency signals of the source are

emphasized excessively.

Panorama

Off (Default) Disables the effect.

On Enables the effect.

CT Width

Adjustable range 0 to 7

Default setting 3

Dimension

Adjustable range -3 to +3

Default setting 0

C.Image

Adjustable range 0.0 to 1.0

Default setting 0.3

1 : Not displayed when speakers are set to be inactive.

En 53

SETUP

You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code).

The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.

Selecting input source connected to DVD

player

Selecting input source connected to CD

player

Keys connecting external

components

cSOURCE A

Switches an external component on and off.

Cursor, jENTER, jRETURN

Operates the menus of external components.

DISPLAY

Switches an external component display.

External component operation keys

Functions as a recording or playback key of an external

component, or a menu display key.

lNumeric keys

Functions as numeric keys of an external component.

mTV control keys J1

Default remote control code

settings

The following remote control codes are assigned to input

sources as factory default settings. For a complete list of

available remote control codes, please refer to “Remote

Control Code Search” in the CD-ROM.

Controlling other components with the remote control

cSOURCE A

dInput selector

iSETUP

jCursor B / C / D / E

jENTER

jRETURN

kExternal component

operation keys

kDISPLAY

lNumeric keys

mTV control keys

mINPUT

mMUTE

mTV VOL +/-

mTV CH +/-

qOPTION

OPTION

SETUP

RETURN

HDMI

AUDIO

1234

125

V-AUX

TUNER

ENTER

7856

1234

REC

ENT

TV VOL TV CH

TOP

POP-UP

DISPLAY

SOURCE

INPUT

MUTE

DOCK[ A ] [ B ]

RECEIVER

ENE

ENHAN

R. DE

TRAI

TRAN

LEE

NIN

VIE M

TERE

RADI

If you are unable to operate this unit after operating an

external component, press iSETUP or qOPTION

and then try operating the remote control again.

Playback/Stop

DVD player

CD player

Playback/Stop

DVD player

CD player

The remote control keys for controlling external

components are available only when the external

components have corresponding control keys.

mINPUT Switches video inputs of TV

mMUTE Mutes TV volume temporarily.

mTV VOL +/- Controls the volume of TV

mTV CH +/- Switches TV channels.

mA Turns on and off TV

Input Category Manufacturer

Remote

control code

HDMI1 Blu-ray

player/

recorder

Yamaha 2064

HDMI2 —— —

HDMI3 —— —

HDMI4 —— —

AV1 —— —

AV2 —— —

AV3 CD player Yamaha 5095

AV4 —— —

AV5 —— —

AUDIO1 —— —

AUDIO2 —— —

V-AUX —— —

A/B J2 —— —

DOCK DOCK Yamaha 5089

TUNER Tuner Yamaha 5085

1 : You can register remote control codes for external components to

dInput selector and remote control codes for TVs in mA

(

mTV control keys).

To register a TV remote control code to

dInput selector:

You can use the

jCursor, lNumeric keys, and mTV

control keys to control a TV you have registered.

To register a remote control code for a device other than a TV to

dInput selector:

You can use the

jCursor and lNumeric keys etc to control

external components, and the

mTV control keys to control

TVs registered in

mA.

2 : Use A/B for external component operations only. Set these keys to

remote control codes if you want to perform external component

operations without linking to input source selection of this unit.

For example, it may be convenient to assign remote control codes

for devices such as TVs.

En 54

SETUP

Controlling other components with the remote control

Registering remote control codes

for external component operations

The following section describes how to register remote

control code using an example of the registration of the

remote control codes of a Yamaha BD player connected

to HDMI2 jack.

Use “Remote Control Code Search” in the CD-

ROM to search the available remote control

codes from the category or manufacturer of

external components.

“2064” can be used for a Yamaha BD player.

Press nCODE SET on the remote control

using a pointed object such as the tip of a

ballpoint pen.

Press dHDMI2 on the remote control to

switch the input source to HDMI2. J1

Perform the following steps to register the selected

input source here to the remote control code.

Enter a remote control code “2064” using

lNumeric keys. J2

Once the remote control code is registered successfully

the remote control will blink twice.

To switch between BD player linked to

scene selections, press hSCENE and at the

same time press dHDMI2 and hold it for

approximately 3 seconds.

Then you can operate the external components by

switching the input source to HDMI2, or selecting

HDMI2 in the registered scene.

Same steps for operating other external components,

press

hSCENE and at the same time press the input

source key selected in step 3 and hold it for

approximately 3 seconds.

dHDMI2

hSCENE

lNumeric keys

mTV control keys

nCODE SET

SCENE

DVD

RADIO

7856

1234

TV VOL TV CH

CODE SET

INPUT

MUTE

ENT

RECEIVER

PTI

RETURN

ENHAN

TRAI

UDI

TRAN

LEE

NIN

TERE

P-

SOU

OCK

[

]

[

]

• Perform each of the following steps within 1 minute.

Settings will be automatically stopped if more than 1

minute passes since the last operation. To reset, repeat

from step 2.

• Remote control code of an external component cannot

be set from the name or model number of a unit. Use

“Remote Control Code Search

” in the CD-ROM to

search the available remote control codes from the

category or manufacturer of external components.

• If multiple remote control codes exist, first set the first

code in the list, if it does not work then try the other

codes.

• If the registration fails, repeat the step 2.

• In case of an external component with multiple remote

control codes, the other remote control codes may be

supported. Repeat from step 2 with the other remote

control codes.

2 0

TRANSMIT

ECEIVE

HDMI

SLEE

SOU

ODE SE

Registration successful: blinks twice

Registration failed: blinks 6 times

1 : When you want to register a remote control code to the mTV

control keys, press

mA (mTV control keys) in step 3.

2 : When you want to register a remote control code to the mTV

control keys, enter the TV remote control code in step 4.

En 55

SETUP

Controlling other components with the remote control

Resetting all remote control codes

Resetting all remote control codes for external

components to the initial factory settings.

Press nCODE SET on the remote control

using a pointed object such as the tip of a

ballpoint pen.

Press iSETUP on the remote control.

Enter “9981” using lNumeric keys.

SETUP

lNumeric keys

nCODE SET

SETUP

7856

1234

CODE SET

ENT

TV V

L TV

NPUT

RECEIVER

ENE

PTI

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

V-A

TUNER

NIN

VIE M

TERE

RADI

NTER

P-

PLA

SOU

[

]

[

]

Perform each of the following steps within 1 minute.

Settings will be automatically stopped if more than 1

minute passes since the last operation. To reset, repeat

from step 2.

TRANSMIT

ECEIVE

HDMI

SLEE

SOU

ODE SE

blinks twice

Once the remote control code is registered

successfully the remote control will blink twice.

If setup fails, repeat from step 1.

9 9

TRANSMIT

ECEIVE

HDMI

SLEE

SOU

ODE SE

Registration successful: blinks twice

Registration failed: blinks 6 times

En 56

SETUP

The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.

Displaying/Setting the Advanced Setup

Set this unit to the standby mode.

Press A while pressing and holding STRAIGHT on

the front panel.

Release the keys when “ADVANCED SETUP” is displayed on

the front panel display.

After approximately 3 seconds, the top menu items are displayed.

Use PROGRAM to select the item to be set from the

following items.

In the Advanced Setup menu, you can set the following settings.

Press STRAIGHT a few times to select the value you

wish to change.

Switch this unit to the standby mode, and then

switch it on again.

The settings become effective and the unit is powered on. If

initialization is selected, it will be performed when the unit is

powered on again.

Extended functionality that can be configured as needed (Advanced Setup menu)

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFO

MEMORY

PRESET

FM AM

YPAO MIC

STRAIGHT

PROGRAM l / h

REMOTEID-ID1

REMOTE ID Changes the remote control ID of a receiver.

TU (Asia and

General models

only)

Selects one of the following FM/AM frequency steps.

INIT Initializes various settings for this unit.

En 57

SETUP

Extended functionality that can be configured as needed (Advanced Setup menu)

Avoiding crossing remote control

signals when using multiple

Yamaha receivers

The remote control of the unit can only receive signals

from a receiver which has an identical ID (remote

control ID). When using multiple Yamaha AV receivers,

you can set each remote control with a unique remote

control ID for its corresponding receiver.

On the contrary, if you are setting the same remote

control ID for all receivers, you can use one remote

control to operate 2 receivers.

Changing FM/AM frequency steps

(Asia and General models only)

You can select one of the following FM/AM frequency

steps: J1

Initializing various settings for this

unit

Initializes various settings stored in this unit and sets it

back to default.

Select the items to be initialized from the following.

SETUP

lNumeric keys

nCODE SET

SETUP

7856

1234

CODE SET

ENT

TV V

L TV

NPUT

RECEIVER

ENE

PTI

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

V-A

TUNER

NIN

VIE M

TERE

RADI

NTER

P-

PLA

SOU

[

]

[

]

ID1 (Default) Receives the remote control signals set in

ID1.

ID2 Receives the remote control signals set in

ID2.

ID1 is set for both remote control and receiver by

default. To avoid crossing remote control, change the

remote control ID for both remote control and

receiver.

REMOTEID-ID1

■ To change the remote control ID

Press nCODE SET on the remote control

using a pointed object such as the tip of a

ballpoint pen.

Press iSETUP on the remote control.

Enter the desired remote control ID code.

To switch to ID1:

Enter “5019” using

lNumeric keys.

To switch to ID2:

Enter “5020” using

lNumeric keys.

Once the remote control code is registered

successfully the remote control will blink twice.

Perform each of the following steps within

1 minute. Settings will be automatically stopped if

more than 1 minute passes since the last operation.

To reset, repeat from step 1.

TRANSMIT

ECEIVE

HDMI

SLEE

SOU

ODE SE

Registration successful: blinks twice

Registration failed: blinks 6 times

• If setup fails, repeat from step 1.

• Returns to ID1 after the remote control code is

initialized (☞

p. 55).

AM10/FM100 You can adjust the AM frequency by

steps of 10kHz and FM by steps of

100kHz.

AM9/FM50

(Default)

You can adjust the AM frequency by

steps of 9kHz and FM by steps of 50kHz.

DSP PARAM Initializes all parameters for the sound

field programs.

ALL Resets this unit to default factory settings.

CANCEL (Default) Does not initialize.

TU-AM9/FM50

INIT-CANCEL

1 : For details on setting FM/AM frequency steps, refer to “FM/AM

tuning” (☞

p. 30).

En 58

SETUP

This unit supports the HDMI Control function, which allows you to

operate external components via HDMI. If you connect devices

that support HDMI Control (ex. Panasonic VIERA Link-

compatible TVs, DVD/Blu-ray Disc recorders, etc.) J1, you can

use the following operations with the remote control of any of

those devices:

– Power synchronization (on/standby)

– Volume control, including Mute

– Changing the volume of the audio output signal device (either the

TV or this unit)

Connect the TV, DVD recorder supporting HDMI

Control to this unit’s HDMI output jack.

Turn on the TV and this unit.

Refer to the TV’s instruction manual on how to operate external

components.

Press iSETUP. J2

Use jCursor B / C to select “HDMI Setup” and

press jENTER.

Make sure that “Control” is selected, and then use

jCursor D / E to select “On.”

Press iSETUP when you have finished changing the setting.

Set the TV/DVD recorder’s HDMI Control function to

On.

Check the instruction manuals for those devices.

Turn the TV off.

Other synchronized HDMI Control devices are turned off with the

TV. If they are not synchronized, turn them off manually.

Turn the TV on.

Confirm that this unit has turned on in conjunction with the TV. If

it is still off, turn it on manually.

Change the TV’s input setting to the input jack that

is connected to this unit (ex. HDMI1).

If DVD recorder that supports the HDMI Control

function are connected to this unit, turn them on.

Confirm that this unit is properly synchronized

with the TV through the following operations by

using the TV remote control.

• Power On/Off

• Volume Control

• Switching between audio output devices

Using the HDMI Control function

NOTE

The following is an example of how to connect this unit, a TV,

and a DVD recorder. Follow the instructions in your TV and

DVD recorder manuals, as well as the ones written below.

– Set the TV’s HDMI Control function to “On”

– Follow the AV amplifier connection instructions, and connect

this unit to the TV

HDMI

Control signal

(such as volume control)

Remote control of TV

This unit

HDMI connection

SL SR

Control;;;;Off

HDMI

VOL.

SL SR

Control;;;;;On

HDMI

VOL.

Receiver unit Confirm that the input source for the DVD recorder

has been selected. If a different input source has been

selected, please change it manually.

TV/DVD Recorder Confirm that the video signal from the recorder is

being properly received by the TV.

Operations 1-10 will not be required more than twice.

If this unit is not synchronized to the TV’s power operations,

check that the HDMI Control function is set to “On” for both

devices.

If they will not properly synchronize, unplugging and re-

plugging the devices and turning them on and off may solve the

problem.

1 : We recommend that you use TVs and DVD/BD recorders from the same

manufacturer whenever possible.

2 : Refer to the “Setting various functions (Setup menu)” (☞p. 42) for details on

the Setup menu.

En 59

SETUP

Using the HDMI Control function

■

Switching the input source on this

unit automatically when listening

to TV audio

When the HDMI Control (☞p. 58) is operating properly,

the input source of this unit is automatically changed to

match operations carried out on the TV. The default

input jack is AV4. If the AV4 optical digital jack is

connected to the TV’s audio output jack, then you can

enjoy TV sound through this unit right away.

To use other jacks to input audio signals from TV, carry

out the following procedure.

Connect this unit and the TV with an HDMI

cable.

Connect TV’s audio output to this unit.

The input jacks listed below are available to input TV’s

audio signals. Use the same jack type as used for the

TV.

Press iSETUP. J1

Use jCursor B / C to select “HDMI Setup”

and press jENTER.

Make sure that “Control” is selected, and

then use jCursor D / E to select “On.”

Press jCursor C to select “TVAudio” and

select the input jack connected in step 2

using jCursor D / E.

Press iSETUP when you have finished

changing the settings.

If the TV hereafter transmits audio output signals, this

unit will automatically switch to the input source

chosen in step 6.

iSETUP

jCursor B / C / D / E

jENTER

SETUP

ENTER

ENT

TV V

L TV

NPUT

RECEIVER

ENE

PTI

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

V-A

TUNER

NIN

VIE M

TERE

RADI

P-

PLA

SOU

[

]

[

]

(

)

OPTICAL

NEN

VIDE

PTI

AV 1

AV 2

AV 3

AV 5

AUDIO 1

AUDIO 2

AXIA

(

)

AXIA

VIDE

HDMI

(

DVD

)

HDMI

HDMI 4

NENT

IDE

NIT

HDMI

NIT

OUT

OCK

OPTICAL

Audio output

(Optical)

TV output jack Input jack

Optical digital audio output AV1 or AV4 (default)

Coaxial digital audio output AV2 or AV3

Analog stereo output AV5, AUDIO1, or AUDIO2

OPTICAL

COAXIAL

(

)

COAXIAL

OPTICAL

NENT

IDE

HDMI 1

(

DVD

)

HDMI 2

DMI

HDMI

OMPONENT

VIDE

NIT

HDMI

NIT

Available input jacks

SL SR

Control;;;;Off

HDMI

VOL.

SL SR

Control;;;;;On

HDMI

VOL.

SL SR

TVAudio;;;;AV4

HDMI

VOL.

1 : Refer to the “Setting various functions (Setup menu)” (☞p. 42)

for details on the Setup menu.

En 60

SETUP

Using the HDMI Control function

■

Single HDMI cable input to TV

audio with Audio Return Channel

function

When using a TV that supports HDMI functions and

Audio Return Channel function, audio/video output

from this unit to the TV or audio output from the TV to

this unit can be transmitted through a single HDMI cable

(Audio Return Channel function). Audio signals

transmitted from the TV to this unit can be assigned to

any input source.

Connect this unit and the TV with an HDMI

cable.

Press iSETUP. J1

Use jCursor B / C to select “HDMI Setup”

and press jENTER.

Make sure that “Control” is selected, and

then use jCursor D / E to select “On.”

Press jCursor C to select “TVAudio” and

select the input source that you want to

assign to the HDMI audio signals from the

TV using jCursor D / E. J2

Press jCursor C to select “ARC” and

press jCursor E to select “On.”

The Audio Return Channel function will turn on.

Press iSETUP when you have finished

changing the settings.

If the TV hereafter transmits audio output signals, this

unit will automatically switch to the input source

chosen in step 6.

iSETUP

jCursor B / C / D / E

jENTER

SETUP

ENTER

ENT

TV V

L TV

NPUT

RECEIVER

ENE

PTI

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

V-A

TUNER

NIN

VIE M

TERE

RADI

P-

PLA

SOU

[

]

[

]

HDMI

OUT

ARC

HDMI

(

BD/DVD

)

HDMI 2

DMI

HDMI 4

NENT

VIDE

HDMI

TV audio

output

Video / Audio

output

SL SR

Control;;;;Off

HDMI

VOL.

SL SR

Control;;;;;On

HDMI

VOL.

SL SR

ARC;;;;;;;;;On

HDMI

VOL.

1 : Refer to the “Setting various functions (Setup menu)” (☞p. 42)

for details on the Setup menu.

2 : While the Audio Return Channel function is on, the jack selected

for the input source cannot be used.

En 61

APPENDIX

Refer to the table below when this unit does not function properly.

If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service

center.

General

Troubleshooting

Problem Cause Remedy

See

page

The power will not

turn on.

The protection circuitry operated

three times consecutively.

As a safety precaution, when the protection

circuitry operates three times consecutively,

the capability to turn on the power is

disabled. Please contact your nearest

Yamaha dealer or service center to request

repair.

—

The unit enters

standby mode soon

after the power is

turned on.

The power cable is not completely

inserted.

Connect the power cable properly to an AC

wall outlet.

—

(When this unit is turned back on

and “CHECK SP WIRES!” is

displayed.) The protection

circuitry has been activated

because this unit was turned on

while a speaker cable was shorted.

Make sure that all speaker cables between

this unit and speakers are connected

properly.

This unit cannot be

turned off or does

not work properly.

The internal microcomputer is

hung-up due to an external electric

shock (such as lightning or

excessive static electricity) or by a

drop in power supply voltage.

Disconnect the power cable from the AC

wall outlet, wait about 30 seconds and then

plug it in again.

—

The batteries in the remote control

may have lost their charge.

Replace all batteries. 4

The unit enters

standby mode.

The protection circuitry has been

activated because of a short circuit,

etc.

Check that the speaker with an impedance

of at least 6Ω.

—

After display of a

countdown on the

front panel, the unit

goes into standby

mode.

If you do not use take any action,

the Auto Power Down function

operates.

Turn on the unit, and play the source again. —

In the Setup menu “AutoPowerDown”

(“Func. Setup” → “AutoPowerDown”),

increase the time until switching to standby

mode, or turn off the Auto Power Down

function.

“Internal Error” is

displayed on the

front panel display.

An internal error has occurred. Please contact authorized Yamaha dealer or

service center to request repair.

—

Sound/images

suddenly go off.

The protection circuitry has been

activated because of a short circuit,

etc.

Check that the speaker wires are not

touching each other, then turn the unit back

on.

—

The sleep timer has turned off the

unit.

Turn on the unit, and play the source again. —

Problem Cause Remedy

See

page

En 62

APPENDIX

Troubleshooting

No sound. Incorrect input or output cable

connections.

Connect the cables properly. If the problem

persists, the cables may be defective.

If a DVI-HDMI cable is used to

connect the unit with an external

component, then it is necessary to

use an audio input jack for a

different input to output audio.

Display the HDMI Input Option menu for

the connected cable, select “Audio In,” and

select the jack to use for audio input.

Speaker connections are not

secure.

Secure the connections. 11

The HDMI components connected

to the unit do not support the

HDCP copy protection standards.

Connect HDMI components that support the

HDCP copy protection standards.

The audio input into the device is

set to playback through the TV.

In the Setup menu, set the HDMI Audio Out

(“HDMI Setup” → “Audio”) to other than

“TV.”

No appropriate input source has

been selected.

Select an appropriate input source with

dInput selector (on the remote control).

The volume is turned down or

muted.

Turn up the volume. —

Signals that this unit cannot

reproduce are being input from a

source component, such as a CD-

ROM.

Use an input source that has signals that can

be reproduced on this unit.

—

No picture. A video jack (ex. Video input →

HDMI output) type different to the

input video is being used to try to

display content on the TV.

Use video jacks of the same type (ex. Video

input → Video output) to connect to the TV.

An appropriate video input is not

selected on the TV.

Select an appropriate video input on the TV. —

Problem Cause Remedy

See

page

No sound is output

from a specific

speaker.

The speaker is malfunctioning.

Check the Speaker indicators on

the front panel display. If the

corresponding indicator lights up,

connect another speaker and check

if sound is output.

If sound is not output, the unit may be

malfunctioning.

The playback component or

speakers are not connected

properly.

Connect the cables properly. If the problem

persists, the cables may be defective.

11, 15

Output from that speaker is

disabled.

Check the Speaker indicators on the front

panel display. If the corresponding indicator

is turned off, try the following.

1) Change to a different input source.

2) With the selected sound field program,

sound is not output from that speaker. Select

another sound field program.

3) “None” may have been selected for that

speaker on this unit. Display “Speaker

Setup” in the Setup menu, and set respective

parameters to enable output from that

speaker (“Speaker Setup” → “Config”).

7, 43

The volume of that speaker is set

to the minimum in “Speaker

Setup” in the Setup menu.

Display “Speaker Setup” in the Setup menu

and adjust the volume (“Speaker Setup” →

“Level”).

(If hardly any sound comes from

one channel)

Speaker output balance is not set

correctly.

Balance the volume of each speaker from

“Level” in the Setup menu (“Speaker Setup”

→ “Level”).

Sound may not be output from

certain channels, depending on the

input source or sound field

program.

Try another sound field program. 26

Only the center

speaker outputs

substantial sound.

When a monaural source sound

field program is applied, for some

surround decoders, sound from all

channels is output from the center

speaker.

Try another sound field program. 26

Problem Cause Remedy

See

page

En 63

APPENDIX

Troubleshooting

No sound is heard

from the surround

speakers.

This unit is in straight decoding

mode and a monaural source is

being played back.

Press gSTRAIGHT (on the remote

control) to exit straight decoding mode.

Sound may not be output from

certain channels depending on

input sources or sound field

programs.

Try another sound field program. 26

No sound is heard

from the subwoofer.

A subwoofer is not connected, or it

is disabled.

Check that a subwoofer is connected

correctly, and from the Setup menu

“Subwoofer” (“Speaker Setup” → “Config”

→ “Subwoofer”), set the subwoofer to

“On.”

The subwoofer is turned off. Turn the subwoofer power on.

If the subwoofer includes an Auto Power

Off function, then lower the Auto Power Off

sensitivity settings.

—

The source does not contain LFE

(☞p. 68) or low frequency signals.

—

The right

combination of audio

/ video jacks to

connect cannot be

found.

Combine input connected to the

external component video output

with another input audio jack.

Select a desired input source (HDMI1-4 or

AV1-2) as a video input and select a audio

input source from “Audio In” in the Option

menu.

The audio input

sources cannot be

played in the desired

digital audio signal

format.

The connected component is not

set to output the desired digital

audio signals.

Set the playback component properly

referring to its instruction manual.

—

There is noise

interference from

digital or radio

frequency

equipment.

This unit is too close to other

digital or radio frequency

equipment.

Move this unit further away from such

equipment.

—

Problem Cause Remedy

See

page

Noise/hum noise is

heard.

Incorrect cable connection.

Connect the audio cables properly.

If the problem persists, the cables may be

defective.

—

A DTS-CD is being played back. If a DTS bitstream signal is not properly

input to this unit, only noise is output.

Connect the playback component to this

unit by digital connection and play back the

DTS-CD.

If the condition is not resolved, the problem

may result from the playback component.

Consult the manufacturer of the playback

component.

—

The volume cannot

be increased, or the

sound is distorted.

The component connected to the

output jacks of this unit is not

turned on.

When the component connected to the

output jacks of this unit is not turned on, the

sound may be distorted, or the volume may

decreased due to the nature of AV receivers.

Turn on all components connected to this

unit.

—

“Max Volume” is set to a low

value.

Set it to a higher value. 47

Problem Cause Remedy

See

page

En 64

APPENDIX

Troubleshooting

HDMI™ Tuner (FM/AM)

Problem Cause Remedy

See

page

The front panel

display HDMI

indicator is flashing.

An error with the HDMI

connection has occurred.

Try re-inserting the HDMI cable. —

Confirm that HDMI video that is not

supported by the unit is not being input

(HDMI Input → Option menu → “Signal

Info”).

No picture or sound. The number of components is over

the limit.

Disconnect some of the HDMI components. —

The connected HDMI component

does not support high-bandwidth

digital copyright protection

(HDCP).

Connect an HDMI component that supports

HDCP.

—

(When using HDMI

Control function)

TV sound is not

output from this unit

when operating the

remote control of the

TV.

The TV audio output is not

connected to this unit, or the

setting to match operations carried

out on TV is not set.

Connect the TV audio output to this unit,

and then select the connected input source

in “TVAudio” (Setup menu → HDMI Setup

→ TVAudio).

(When using Audio Return

Channel function)

The Audio Return Channel

function is not working.

Make sure that your TV supports Audio

Return Channel.

Set the Audio Return Channel function to

on (Setup menu → HDMI Setup → ARC).

Problem Cause Remedy

See

page

FM stereo reception

is noisy.

You are too far from the station

transmitter, or the input from the

antenna is weak.

Check the antenna connections. 20

Switch to monaural mode. 31

Replace the outdoor antenna with a more

sensitive multi-element antenna.

—

There is distortion,

and clear reception

cannot be obtained

even with a good FM

antenna.

There is multi-path interference. Adjust the antenna height or orientation, or

place it in a different location.

—

The desired station

cannot be tuned into

with the automatic

tuning method.

You are in an area far from a

station, or input from the antenna

is weak.

Replace the outdoor antenna with a more

sensitive multi element antenna.

—

Use eTUNING H / I (on the remote

control) to manually select the station.

“No Presets” is

displayed.

No preset stations are registered. Register stations you wish to listen to as

preset stations before operation.

“Wrong Station” is

displayed.

An invalid FM/AM frequency has

been input.

Input a frequency that can be received. —

En 65

APPENDIX

Troubleshooting

Remote control

Problem Cause Remedy

See

page

The desired station

cannot be tuned into

with the automatic

tuning method.

The signal is weak, or the antenna

connections are loose.

Adjust the AM loop antenna orientation. 20

Use the manual tuning method. 30

Automatic station

preset does not

work.

Automatic station preset is not

available for AM stations.

Use manual station preset. 32

Continuous

crackling and

hissing noises are

heard.

The supplied AM loop antenna is

not connected.

Connect the AM loop antenna correctly

even if you use an outdoor antenna.

The noises may be caused by

lightning, fluorescent lamps,

motors, thermostats, or other

electrical equipment.

It is difficult to completely eliminate noise,

but it can be reduced by installing and

properly grounding an outdoor AM antenna.

Buzzing and whining

noises are heard.

A TV set is being used nearby. Move this unit away from the TV set. —

Problem Cause Remedy

See

page

The remote control

does not work or

function properly.

Wrong distance or angle. The remote control will function within a

maximum range of 20 ft / 6 m, and no more

than 30 degrees off-axis from the front

panel.

—

Direct sunlight or lighting (from

an inverter type of fluorescent

lamp, strobe light, etc.) is striking

the remote control sensor of this

unit.

Adjust the lighting angle, or reposition this

unit.

—

The batteries are weak. Replace all batteries. 4

The remote control ID of the

remote control and this unit do not

match.

Match the remote control ID of this unit and

the remote control.

External components

cannot be controlled

using the remote

control.

The remote control code is not

correctly set.

Set the remote control code correctly using

“Remote control code search” on the CD-

ROM.

—

Try setting another code for the same

manufacturer using “Remote control code

search” on the CD-ROM.

—

If this unit does not work when you press

jCursor B / C / D / E (on the remote

control), do the following.

When the key does not work during DVD

disc menu operation: press the dInput

selector (on the remote control) again.

—

When the key does not work during Option

menu/Setup menu operation: press the key

corresponding to the current menu operation

again.

Even if the remote control code is correctly

set, there are some models that do not

respond to the remote control.

—

En 66

APPENDIX

Troubleshooting

iPod™/iPhone™ Bluetooth™

Display Cause Remedy

See

page

Loading... The unit is in the process of

recognizing the connection with

your iPod/iPhone.

—

The unit is in the middle of

acquiring song lists from your

iPod/iPhone.

—

Connect error There is a problem with the signal

path from your iPod/iPhone to the

unit.

Turn off the unit and reconnect the Yamaha

iPod universal dock to the DOCK jack of

the unit.

Remove your iPod/iPhone from the Yamaha

iPod universal dock and then place it back in

the dock.

Unknown iPod The iPod/iPhone being used is not

supported by the unit.

Connect an iPod/iPhone supported by the

unit.

—

iPod connected Your iPod/iPhone is properly

placed in the Yamaha iPod

universal dock.

—

Disconnected Your iPod/iPhone is removed from

the Yamaha iPod universal dock.

—

Unable to play The unit cannot play back the

songs currently stored on your

iPod/iPhone.

Check that songs are currently stored on

your iPod/iPhone.

—

Display Cause Remedy

See

page

Searching... The Yamaha Bluetooth wireless

audio receiver and the Bluetooth

component are in the process of

pairing.

—

The Yamaha Bluetooth wireless

audio receiver and the Bluetooth

component are in the process of

establishing a connection.

—

Completed The pairing is completed. —

Canceled The pairing is canceled. —

BT connected The connection between the

Yamaha Bluetooth wireless audio

receiver and the Bluetooth

component is established.

—

Disconnected The Bluetooth component is

disconnected from the Yamaha

Bluetooth wireless audio receiver.

—

Not found The Bluetooth component is not

found.

During pairing:

– pairing must be performed on the

Bluetooth component and this unit

simultaneously. Check if the Bluetooth

component is in pairing mode.

During connecting:

– check if the Bluetooth component is

turned on.

– check if the Bluetooth component is

within 32 feet (10 m) of the Yamaha

Bluetooth wireless audio receiver.

—

En 67

APPENDIX

Audio information

Audio and video synchronization (lip sync)

Lip sync, an abbreviation for lip synchronization, is a technical term that

involves both a problem, and the capability of maintaining audio and video

signals synchronized during post-production and transmission.

Whereas the audio and video latency requires complex end-user

adjustment, HDMI version 1.3 incorporates an automatic audio and video

syncing capability that allows devices to perform this synchronization

automatically and accurately without user interaction.

Dolby Digital

Dolby Digital is a digital surround sound system that gives you completely

independent multi-channel audio. With 3 front channels (front L/R and

center), and 2 surround stereo channels, Dolby Digital provides 5 full-range

audio channels. With an additional channel especially for bass effects,

referred to as LFE (Low-Frequency Effect), the system has a total of 5.1-

channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the

surround speakers, more accurate moving sound effects and surround sound

environments are possible than with Dolby Surround. The wide dynamic

range from maximum to minimum volumes that are reproduced by the 5

full-range channels, and the precise sound orientation generated using

digital sound processing provides listeners with unprecedented excitement

and realism. With this unit, any sound environment from monaural up to a

5.1-channel configuration can be freely selected for your enjoyment.

Dolby Pro Logic II

Dolby Pro Logic II is an improved technique used to decode vast numbers

of existing Dolby Surround sources. This new technology enables a discrete

5-channel playback with 2 front left and right channels, 1 center channel,

and 2 surround left and right channels, instead of only 1 surround channel

for conventional Pro Logic technology. There are three modes available:

“Music mode” for music sources, “Movie mode” for movie sources, and

“Game mode” for game sources.

Dolby Surround

Dolby Surround uses a 4-channel analog recording system to reproduce

realistic and dynamic sound effects: 2 front left and right channels (stereo),

a center channel for dialog (monaural), and a surround channel for special

sound effects (monaural). The surround channel reproduces sound within a

narrow frequency range. Dolby Surround is widely used with nearly all

video tapes and laser discs, as well as in many TV and cable broadcasts.

The Dolby Pro Logic decoder built into this unit employs a digital signal

processing system that automatically stabilizes the volume on each channel

to enhance moving sound effects and directionality.

Dolby TrueHD

Dolby TrueHD is an advanced lossless audio technology developed for

high-definition disc-based media including Blu-ray Disc. Selected as an

optional audio standard for Blu-ray Disc, this technology delivers sound

that is bit-for-bit identical to the studio master, offering a high-definition

home theater experience. Supporting bitrates up to 18.0 Mbps, Dolby

TrueHD can carry up to 8 discrete channels of 24-bit/96 kHz audio

simultaneously. Dolby TrueHD also remains fully compatible with the

existing multichannel audio systems and retains the metadata capability of

Dolby Digital, allowing dialog normalization and dynamic range control.

DTS 96/24

DTS 96/24 offers an unprecedented level of audio quality for multichannel

sound on DVD video, and is fully backward-compatible with all DTS

decoders. “96” refers to a 96 kHz sampling rate compared to the typical

48 kHz sampling rate. “24” refers to 24-bit word length. DTS 96/24 offers

sound quality transparent to the original 96/24 master, and 96/24 5.1-

channel sound with full-quality full-motion video for music programs and

motion picture soundtracks on DVD video.

DTS Digital Surround

DTS Digital Surround was developed to replace the analog soundtracks of

movies with a 5.1-channel digital sound track, and is now rapidly gaining

popularity in movie theaters around the world. DTS, Inc. has developed a

home theater system so that you can enjoy the depth of sound and natural

spatial representation of DTS Digital Surround in your home. This system

produces practically distortion-free 5.1-channel sound (technically, left,

right and center channels, 2 surround channels, plus an LFE 0.1 channel as

a subwoofer, for a total of 5.1-channels).

DTS Express

This is an audio format for next-generation optical discs such as Blu-ray

discs. It uses optimized low bit rate signals for network streaming. In the

case of a Blu-ray disc, this format is used with secondary audio, enabling

you to enjoy the commentary of the movie producer via the Internet while

playing the main program.

DTS-HD High Resolution Audio

DTS-HD High Resolution Audio is a high resolution audio technology

developed for high-definition disc-based media including Blu-ray Disc.

Selected as an optional audio standard for Blu-ray Disc, this technology

delivers sound that is virtually indistinguishable from the original, offering

a high-definition home theater experience.

Supporting bitrates up to 6.0 Mbps for Blu-ray Disc, DTS-HD High

Resolution Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz

audio simultaneously.

DTS-HD High Resolution Audio also remains fully compatible with the

existing multichannel audio systems that incorporate DTS Digital

Surround.

DTS-HD Master Audio

DTS-HD Master Audio is an advanced lossless audio technology developed

for high-definition disc-based media including Blu-ray Disc. Selected as an

optional audio standard for Blu-ray Disc, this technology delivers sound

that is bit-for-bit identical to the studio master, offering a high-definition

home theater experience.

Supporting bitrates up to 24.5 Mbps for Blu-ray Disc, DTS-HD Master

Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz audio

simultaneously. Supported by HDMI version 1.3 and designed for the

optical disc players and AV receivers/amplifiers of the future, DTS-HD

Master Audio also remains fully compatible with the existing multichannel

audio systems that incorporate DTS Digital Surround.

DSD

Direct Stream Digital (DSD) technology stores audio signals on digital

storage media, such as Super Audio CDs. Using DSD, signals are stored as

single bit values at a high-frequency sampling rate of 2.8224 MHz, while

noise shaping and oversampling are used to reduce distortion, a common

occurrence with very high quantization of audio signals. Due to the high

sampling rate, better audio quality can be achieved than that offered by the

PCM format used for normal audio CDs. The frequency is equal to or

higher than 100 kHz, with a dynamic range of 120 dB. This unit can

transmit or receive DSD signals via the HDMI jack.

Glossary

En 68

APPENDIX

Glossary

LFE 0.1 channel

This channel reproduces low-frequency bass signals, and has a frequency

range from 20 Hz to 120 Hz. This channel is counted as 0.1, because it only

enforces a low-frequency range compared to the full-range reproduced by

the other 5 channels in Dolby Digital or DTS 5.1-channel systems.

Neo:6

Neo:6 decodes the conventional 2-channel sources for 6-channel playback

by the specific decoder. It enables playback with the full-range channels

with higher separation just like digital discrete signal playback. There are

two modes available: “Music mode” for music sources and “Cinema mode”

for movie sources.

PCM (Linear PCM)

Linear PCM is a signal format under which an analog audio signal is

digitized, recorded and transmitted without using any compression. This is

used as a method of recording CDs and DVD audio. The PCM system uses

a technique for sampling the size of the analog signal per very small unit of

time. Standing for “Pulse Code Modulation,” the analog signal is encoded

as pulses and then modulated for recording.

Sampling frequency and number of quantized bits

When digitizing an analog audio signal, the number of times the signal is

sampled per second is called the sampling frequency, while the degree of

accuracy when converting the sound level into a numeric value is called the

number of quantized bits. The range of rates that can be played back is

determined based on the sampling rate, whereas the dynamic range

representing the sound level difference is determined by the number of

quantized bits. In principle, the higher the sampling frequency, the wider

the range of frequencies that can be played back, and the higher the number

of quantized bits, the more accurately the sound level can be reproduced.

Sound field program information

CINEMA DSP

Since the Dolby Surround and DTS systems were originally designed for

use in movie theaters, their effect is best felt in a theater having many

speakers designed for acoustic effects. Since home conditions, such as

room size, wall material, number of speakers, and so on, can differ so

widely, it is inevitable that there are differences in the sound that is heard.

Based on a wealth of actually measured data, Yamaha CINEMA DSP uses

Yamaha’s original DSP technology to combine Dolby Pro Logic, Dolby

Digital, and DTS systems to provide the audiovisual experience of a movie

theater in the listening room of your own home.

Compressed music enhancer

The Compressed music enhancer feature of this unit enhances your

listening experience by regenerating the missing harmonics in compression

artifacts. As a result, it compensates for flattened complexity due to the loss

of high-frequency fidelity as well as lack of bass due to the loss of low-

frequency bass, providing improved performance for the overall sound

system.

SILENT CINEMA

Yamaha has developed a natural, realistic sound effect DSP algorithm for

headphones. Parameters for headphones have been set for each sound field

program, so that accurate representations of all the sound field programs

can be enjoyed on headphones.

Virtual CINEMA DSP

Yamaha has developed a Virtual CINEMA DSP algorithm that allows you

to enjoy DSP surround effects even without any surround speakers, by

using virtual surround speakers. It is even possible to enjoy Virtual

CINEMA DSP using a minimal two-speaker system that does not include a

center speaker.

Video information

Component video signal

With the component video signal system, the video signal is separated into

the Y signal for luminance and the P

B and PR signals for chrominance.

Color can be reproduced more faithfully with this system because each of

these signals is independent. The component signal is also called the “color

difference signal” because the luminance signal is subtracted from the color

signal. A monitor with component input jacks is required in order to output

component signals.

Composite video signal

With the composite video signal system, the video signal comprises the

three basic elements of a video picture: color, brightness and

synchronization data. A composite video jack on a video component

transmits these three elements combined.

Deep Color

Deep Color refers to the use of various color depths in displays, up from the

24-bit depths in previous versions of the HDMI specification. This extra bit

depth allows HDTVs and other displays increase from millions of colors to

billions of colors and eliminate on-screen color banding for smooth tonal

transitions and subtle gradations between colors. The increased contrast

ratio can represent many times more shades of gray between black and

white. Additionally, Deep Color increases the number of available colors

within the boundaries defined by the RGB or YCbCr color space.

HDMI

HDMI (High-Definition Multimedia Interface) is the first industry

supported, uncompressed, all-digital audio/video interface. Providing an

interface between any sources (such as set-top boxes or AV receivers) and

audio/video monitors (such as digital TV), HDMI supports standard,

enhanced or high-definition video as well as multichannel digital audio

using a single cable. HDMI transmits all ATSC HDTV standards and

supports 8-channel digital audio, with bandwidth to spare to accommodate

future enhancements and requirements.

When used in combination with HDCP (High-bandwidth Digital Content

Protection), HDMI provides a secure audio/video interface that meets the

security requirements of content providers and system operators. For

further information on HDMI, visit the HDMI website at

“http://www.hdmi.org/.”

“x.v.Color”

A color space standard supported by HDMI version 1.3. It is a more

extensive color space than sRGB, and allows the expression of colors that

were not hitherto possible. While remaining compatible with the color

gamut of sRGB standards, “x.v.Color” expands the color space, and can

thus produce more vivid, natural images. It is particularly effective for still

pictures and computer graphics.

En 69

APPENDIX

■ HDMI signal compatibility

Audio signals

• If the input source component can decode the bitstream audio signals of audio commentaries, you can play back the audio

sources with the audio commentaries mixed down by using the digital audio input (optical or coaxial) connections.

• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.

Video signals

This unit is compatible with the video signals of the following resolutions:

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are

trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;

6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents

issued & pending. DTS, DTS-HD and the Symbol are registered trademarks, & DTS-HD Master

Rights Reserved.

iPod™, iPhone™

“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries. “iPhone” is a trademark

of Apple Inc.

Bluetooth™

Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a

license agreement.

“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered

trademarks of HDMI Licensing LLC.

“SILENT CINEMA” is a trademark of Yamaha Corporation.

Information on HDMI™

Audio signal types Audio signal formats Compatible media

2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc.

Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD,

etc.

DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc.

Bitstream Dolby Digital, DTS DVD-Video, etc.

Bitstream (High definition audio) Dolby TrueHD, Dolby Digital Plus,

DTS-HD Master Audio, DTS-HD

High Resolution Audio, DTS Express

Blu-ray Disc, HD DVD, etc.

NOTES

• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output,

depending on the type of the DVD player.

• This unit is not compatible with HDCP-incompatible HDMI or DVI components.

• Refer to the supplied instruction manuals for details.

To decode audio bitstream signals on this unit, set the input source component appropriately so that the

component outputs the bitstream audio signals directly (does not decode the bitstream signals on the

component).

• This unit is not compatible with the audio commentary features (for example, the special audio contents

downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not play back the audio

commentaries of the Blu-ray Disc or HD DVD content.

– 480i/60 Hz

– 576i/50 Hz

– 480p/60 Hz

– 576p/50 Hz

– 720p/60 Hz, 50 Hz

– 1080i/60 Hz, 50 Hz

– 1080p/60 Hz, 50 Hz, 24 Hz

About trademarks

En 70

APPENDIX

■ INPUT/OUTPUT

Input jacks

• HDMI input x 4

• AV input x 5

[Audio] Digital input (optical) x 2, digital input (coaxial) x 2,

analog input x 1

[Video] Component video jacks x 2, video jacks x 3

• AUDIO input x 2

[Audio] Analog jack x 2

• VIDEO AUX input x 1

[Audio] Analog x 1, stereo mini jack x 1

[Video] Video jack x 1

Output jacks

• TV output (monitor output) x 3

[Audio/Video] HDMI x 1

[Video] Component video jack x 1, video jack x 1

• AV output x 2

[Audio] Analog jack x 1

[Video] Video jack x 1

• AUDIO output x 1

[Audio] Analog jack x 1

■ HDMI

• HDMI Specification: Deep Color, “x.v.Color,” Auto Lips Sync,

ARC (Audio Return Channel)

• Video Format (Repeater Mode)

- VGA

- 480i/60 Hz

- 576i/50 Hz

- 480p/60 Hz

- 576p/50 Hz

- 720p/60 Hz, 50 Hz

- 1080i/60 Hz, 50 Hz

- 1080p/60 Hz, 50 Hz, 24 Hz

•Audio Format

- Dolby Digital

- DTS

- DSD 6ch

- Dolby Digital Plus

- Dolby TrueHD

- DTS-HD

- PCM 2ch-8ch (Max 192 kHz/24 bit)

• Content Protection: HDCP compatible

■ Compatible Decoding Formats

• Decoding Format

- Dolby TrueHD, Dolby Digital Plus

- DTS-HD Master Audio, DTS-HD High Resolution, DTS Express

- Dolby Digital

- DTS, DTS 96/24

• Post Decoding Format

- Dolby Pro Logic

- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,

Dolby Pro Logic II Game

- DTS Neo:6 Music, DTS Neo:6 Cinema

■ AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround

[U.S.A. and Canada models]

(1 kHz, 0.9% THD, 8 Ω)

FRONT L/R........................................................................100 W/ch

CENTER .................................................................................100 W

SURROUND L/R...............................................................100 W/ch

[Other models]

(1 kHz, 0.9% THD, 6 Ω)

FRONT L/R........................................................................100 W/ch

CENTER .................................................................................100 W

SURROUND L/R...............................................................100 W/ch

• Dynamic Power (IHF)

[U.S.A. and Canada models]

Front Speakers 8/6/4/2 Ω .................................. 110/130/160/180 W

[Other models]

Front Speakers 6/4/2 Ω ............................................ 105/130/150 W

• Maximum Useful Output Power (JEITA)

[China, Korea, General and Asia models]

1 kHz, 10% THD, 6 Ω ............................................................135 W

• Maximum Output Power [U.K., Europe and Asia models]

1 kHz, 0.7% THD, 4 Ω ...........................................................120 W

• IEC Output Power [U.K., Europe and Asia models]

Front Speakers 1 kHz, 0.9% THD, 8 Ω .........................95 W+95 W

• Dynamic Headroom [U.S.A. and Canada models]

8 Ω ........................................................................................ 0.23 dB

• Input Sensitivity/Input Impedance

AV5, etc .....................................................................200 mV/47 kΩ

• Maximum Input Voltage

AV5, etc. (1 kHz, 0.5% THD)..................................... 2.3 V or more

• Rated Output Voltage/Output Impedance

AUDIO OUT ............................................................200 mV/1.2 kΩ

SUBWOOFER (2ch Stereo & Front: Small)................1.0 V/1.2 kΩ

• Headphone Jack Rated Output/Impedance

AV5, etc. (1 kHz, 50 mV, 8 Ω)...................................100 mV/470 Ω

• Frequency Response

AV5 to FRONT .....................................10 Hz to 100 kHz, +0/-3 dB

• Total Harmonic Distortion

AV 5 , e t c . t o F RO N T

[U.S.A. and Canada models] (1 kHz, 50 W, 8 Ω)........ 0.06% or less

[Other models] (1 kHz, 50 W, 6 Ω) ............................. 0.06% or less

• Signal to Noise Ratio (IHF-A Network)

AV5, etc. Input Shorted (250 mV to Front Speakers)

................................................................................. 98 dB or more

• Residual Noise (IHF-A Network)

Front Speakers ........................................................... 150 µV or less

• Channel Separation (1 kHz/10 kHz)

AV5, etc. (5.1 kΩ shortened) ...........................60 dB/45 dB or more

• Volume Control ...................................... MUTE / -80 dB to +16.5 dB

• Tone Control (Front Speakers)

BASS Boost/Cut ............................................ ±10 dB/2 dB at 50 Hz

BASS Turnover Frequency .................................................... 350 Hz

TREBLE Boost/Cut ..................................... ±10 dB/2 dB at 20 kHz

TREBLE Turnover Frequency.............................................. 3.5 kHz

• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)

H.P.F. (Front, Center, Surround) ....................................... 12 dB/oct.

L.P.F. (Subwoofer) ............................................................ 24 dB/oct.

Specifications

En 71

APPENDIX

■ VIDEO SECTION

• Video Signal Type

[U.S.A., Canada, Korea and General models] .........................NTSC

[Other models]............................................................................PAL

• Signal Level

Composite......................................................................1 Vp-p/75 Ω

Component ...................... 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (P

B/PR)

• Maximum Input Level (Video Conversion Off)....... 1.5 Vp-p or more

• Signal to Noise Ratio ....................................................50 dB or more

• Frequency Response [MONITOR OUT]

Component (Video Conversion Off)............ 5 Hz to 60 MHz, ±3 dB

■ FM SECTION

• Tuning Range

[U.S.A. and Canada models] ...............................87.5 to 107.9 MHz

[Asia and General models] ........... 87.5/87.50 to 108.0/108.00 MHz

[Other models].................................................87.50 to 108.00 MHz

• 50 dB Quieting Sensitivity (IHF)

Mono..................................................................... 3.0 µV (20.8 dBf)

• Signal to Noise Ratio (IHF)

Mono/Stereo.................................................................. 74 dB/69 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo........................................................................0.3/0.3%

• Antenna Input (unbalanced)......................................................... 75 Ω

■ AM SECTION

• Tuning Range

[U.S.A. and Canada models]...................................530 to 1710 kHz

[Asia and General models]..................... 530/531 to 1710/1611 kHz

[Other models] ........................................................531 to 1611 kHz

■ GENERAL

• Power Supply

[U.S.A. and Canada models].................................. AC 120 V, 60 Hz

[General models]......................... AC 110-120/220-240 V, 50/60 Hz

[China model].........................................................AC 220 V, 50 Hz

[Korea model] ........................................................AC 220 V, 60 Hz

[Australia model] ................................................... AC 240 V, 50 Hz

[U.K. and Europe models] ..................................... AC 230 V, 50 Hz

[Asia models] ............................................ AC 220-240 V, 50/60 Hz

• Power Consumption

[U.S.A. and Canada models] .....................................250 W/320 VA

[Other models] ........................................................................250 W

• Standby Power Consumption

[General models] ..........................................................1.0 W or less

[Other models] ..............................................................0.5 W or less

• Dimensions (W x H x D)

435 x 151 x 315 mm (17-1/8 x 6 x 12-3/8 in)

• Weight

7.5 kg (16.5 lbs)

* Specifications are subject to change without notice.

Advanced Setup menu ................................................................. 56

AM tuning .................................................................................... 30

Antenna connection ..................................................................... 20

Audio Return Channel function ................................................... 60

Bluetooth™ component playback................................................ 37

Cable plug .................................................................................... 12

Connections.................................................................................... 9

External device connection .......................................................... 12

FM tuning.................................................................................... 30

Front panel .................................................................................... 5

Front panel display ........................................................................ 7

HDMI Control function............................................................... 58

iPod™/iPhone™ playback.......................................................... 35

Jack.............................................................................................. 12

Option menu ................................................................................ 39

Rear panel...................................................................................... 6

Remote control, Controlling other components .......................... 53

Remote control, Part names and functions.................................... 8

SCENE function .......................................................................... 26

Setup menu .................................................................................. 42

Sound field program.................................................................... 26

Sound field program parameter setting ....................................... 51

Speaker connection........................................................................ 9

Speaker setting ............................................................................ 21

Supplied accessories...................................................................... 4

Index

YD282A0/OMEN3

Yamaha RX-V371 El manual del propietario

Marca: Yamaha

Modelo: RX-V371

Categoría: Receptores AV

Tipo: El manual del propietario

Descargar PDF

informe

en otros idiomas

English: Yamaha RX-V371 Owner's manual

Yamaha RX-V371 El manual del propietario

Yamaha RX-V371 El manual del propietario

en otros idiomas

Artículos relacionados

Otros documentos