![](//vs1.manuzoid.es/store/data-gzf/2dc1e7ab533a74ada6442e6696af9304/2/000179062.htmlex.zip/bg2.jpg)
1. NOTE ON/OFF 3. MODE MESSAGES
Data format: [9nH] -> [kkH] -> [vvH] Data format: [BnH] -> [ccH] -> [vvH]
9nH = Note ON/OFF event (n = channel number) BnH = Control event (n = channel number)
kkH = ccH = Control number
vvH = Data Range
vvH = Velocity (Key ON = 01H–7FH, Key OFF = 00H)
(1) All Sound Off
Data format: [8nH] -> [kkH] -> [vvH] (reception only) ccH Parameter Data Range (vvH)
8nH = Note OFF event (n = channel number) 78H All Sound Off 00H
kkH = Note number: 00H–7FH = C-2–G8)
vvH = Velocity
(2) Reset All Controllers
ccH Parameter Data Range (vvH)
2. CONTROL CHANGE
79H Reset All Controllers 00H
Data format: [BnH] -> [ccH] -> [vvH] Resets controllers as follows.
BnH = Control change (n = channel number) Controller Value
ccH = Control number Expression 127 (max)
vvH = Data Range Sustain Pedal 0 (off)
Sostenuto 0 (off)
(1) Bank Select
Soft Pedal 0 (off)
ccH Parameter Data Range (vvH)
00H Bank Select MSB 00H:Normal
(3) Local Control (reception only)
20H Bank Select LSB 00H...7FH ccH Parameter Data Range (vvH)
7AH Local Control 00H (off), 7FH (on)
(4) All Notes Off
(2) Main Volume
ccH Parameter Data Range (vvH)
ccH Parameter Data Range (vvH) 7BH All Notes Off 00H
07H Volume MSB 00H...7FH
(3) Expression (reception only)
ccH Parameter Data Range (vvH)
0BH Expression MSB 00H...7FH
(5) Omni Off (reception only)
(4) Sustain
ccH Parameter Data Range (vvH)
ccH Parameter Data Range (vvH) 7CH Omni Off 00H
40H Sustain MSB 00H...7FH Same processing as for All Notes Off.
(5) Sostenuto (6) Omni On (reception only)
ccH Parameter Data Range (vvH) ccH Parameter Data Range (vvH)
42H Sostenuto 00H...3FH:off, 40H...7FH:on 7DH Omni On 00H
Same processing as for All Notes Off.
(6) Soft Pedal
ccH Parameter Data Range (vvH)
(7) Mono (reception only)
43H Soft Pedal 00H...3FH:off, 40H...7FH:on ccH Parameter Data Range (vvH)
7EH Mono 00H
(7) Effect1 Depth (Reverb Send Level)
Same processing as for All Sound Off.
ccH Parameter Data Range (vvH)
5BH Effect1 Depth 00H...7FH
(8) Poly (reception only)
Adjusts the reverb send level. ccH Parameter Data Range (vvH)
7FH Poly 00H
(8) Effect4 Depth (Variation Effect Send Level)
Same processing as for All Sound Off.
ccH Parameter Data Range (vvH)
5EH Effect4 Depth 00H...7FH •
(9) RPN
•
65H RPN MSB
64H RPN LSB
06H Data Entry MSB •
26H Data Entry LSB
60H Data Increment
61H Data Decrement
* Parameters that are controllable with RPN: •
Coarse Tune, Fine Tune, Pitch Bend Range
Poly mode is always active. This mode will not change
when the instrument receives a MONO/POLY mode
message.
Note number (Transmit: 09H–78H = A-2–C8 /
Receive: 00H-7FH = C-2–G8)
When a voice bank MSB/LSB is received, the number is
stored in the internal buffer regardless of the received order,
then the stored value is used to select the appropriate voice
when a program change message is received.
Bank selection processing does not occur until receipt of
next Program Change message.
Switches OFF all the notes that are currently ON on the
specified channel. Any notes being held by the sustain or
sostenuto pedal will continue to sound until the pedal is
released.
When Control Change is turned OFF, Control Change
messages will not be transmitted or received.
Local on/off, OMNI on/off are not transmitted. (The
appropriate note off number is supplied with “All Note Off”
transmission).
MIDI Data Format / MIDI-Datenformat /
Format des données MIDI / Formato de datos MIDI
[2] P-85 Data List