Sylvania 6720FDG Manual de usuario

Categoría
Reproductores de casete
Tipo
Manual de usuario

Este manual también es adecuado para

Owner’s Manual
6720FDG
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING
AFTER READING OWNER’S MANUAL,
PLEASE CALL
TOLL FREE 1-800-968-3429 OR VISIT OUR WEB SITE AT
http://www.SylvaniaConsumerElectronics.com
20 inch DVD TRIPLE COMBO
INSTRUCCIONES EN ESPAÑOL INCLUDAS
FEATURES
• Auto Channel Programming
• Timer Recording
1 year 8 events programmable
Daily/Weekly recording
• One Touch Recording
• Auto Clock Setting
• Screen Saver
• Auto Power On and Off
• Parental Lock
• Resume Play (DVD)
• Closed Caption Decoder
• Virtual Surround
PLEASE READ BEFORE USING THIS EQUIPMENT
P Owner's Manual
(1EMN21452)
P Remote Control
(NF101UD)
P AA batteries x 2
Owner's Manual
SUPPLIED ACCESSORIES
This unit comes with the following accessories. Please confirm that
all the accessories are included.
T1200UA_EN.QX3 06.2.6 11:15 AM Page 1
EN
2
P
RECAUTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE CONSTITUTING
A RISK OF ELECTRIC SHOCK IS
PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT
THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING
THE APPLIANCE.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The caution marking is located on the rear of the cabinet.
I
MPORTANT SAFEGUARDS
1. Read instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5.
Cleaning - Unplug the unit from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted ser-
vice and, that for some specific reason, such as the possibili-
ty of the loss of an authorization code for a CATV converter,
is not intended to be unplugged by the user for cleaning or
any other purpose, may exclude the reference to unplugging
the appliance in the cleaning description otherwise required
in item 5.
6. Attachments - Do not use attachments not recommended
by the unit manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this unit near water - for
example, near a bath tub, wash bowl, kitchen sink, or laun-
dry tub, in a wet basement, or near a swimming pool, and
the like.
8. Accessories - Do not place this unit on an
unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury to
someone, and serious damage to the appli-
ance. Use only with a cart, stand, tripod, brack-
et, or table recommended by the manufacturer,
or sold with the unit. Any mounting of the appli-
ance should follow the manufacturer’s instructions and
should use a mounting accessory recommended by the
manufacturer. An appliance and cart combination should be
moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to
overturn.
Ameubles - Cet appareil ne doit être placé
que sur un meuble (avec ou sans roulettes)
recommandé par le fabricant. Si vous l’installez
sur un meuble à roulettes, déplacez les deux
ensembles avec précaution. Un arrêt brusque,
l’utilisation d’une force excessive et des sur-
faces irrégulières risquent de déstabiliser l’ensemble et de le
renverser.
9. Ventilation - Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating, and
these openings must not be blocked or covered. The open-
ings should never be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should never be
placed near or over a radiator or heat register. This unit
should not be placed in a built-in installation such as a book-
case or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
10. Power Sources - This unit should be operated only from the
type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, con-
sult your appliance dealer or local power company. For the
units intended to operate from battery power, or other
sources, refer to the operating instructions.
11. Grounding or Polarization - This unit is equipped with a
polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your elec-
trician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
12. Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
13. Outdoor Antenna grounding - If an outside antenna or
cable system is connected to the unit, be sure the antenna
or cable system is grounded so as to provide some protec-
tion against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA No.
70, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conduc-
tors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode. (Fig. A)
PORTABLE CART WARNING
S3126A
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
S2898A
SYMBOLE D'AVERTISSEMENT POUR
LES COMPOSANTES
APPAREIL ET MEUBLE A ROULETTES
S3126A
T1200UA_EN.QX3 06.2.6 11:15 AM Page 2
EN
3
PRECAUTIONS
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellec-
tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC WARNING-
This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the
owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or
modification is made.
14. Lightning - For added protection for this unit receiver during
a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the unit due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other elec-
tric light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this unit through openings as they may touch dangerous
voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the unit.
18. Servicing - Do not attempt to service this unit yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified ser-
vice personnel.
19. Damage Requiring Service - Unplug this unit from the wall
outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operat-
ing instructions. Adjust only those controls that are covered
by the operating instructions, as improper adjustment of
other controls may result in damage and will often require
extensive work by a qualified technician to restore the unit to
its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performance, this
indicates a need for service.
20. Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same character-
istics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other haz-
ards.
21. Safety Check - Upon completion of any service or repairs to
this unit, ask the service technician to perform routine safety
checks to determine that the unit is in proper operating con-
dition.
22. Heat - This unit product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
T1200UA_EN.QX3 06.2.6 11:15 AM Page 3
4
EN
The serial number of this product may be found on the back of the unit. No other unit has the same serial
number as yours. You should record the number and other vital information here and retain this book as a
permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
NOTE ABOUT RECYCLING
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-
tions concerning chemical wastes.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU'AU FOND.
LOCATION
For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place
for its installation:
• Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the
top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
• Install unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the unit near strong magnetic fields.
• Avoid moving unit to locations where temperature differences are extreme.
• Be sure to remove disc and unplug the AC power cord from the outlet before carrying the unit.
TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the unit disc loading tray.
• Do not place anything directly on top of the unit.
MOISTURE WARNING
• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or
after heating a cold room or under conditions of high humidity. If you play a videotape or DVD in a moist
unit, it may damage the tape or DVD and the unit. When the condensation occurs inside the unit, turn the
unit on and leave it at least 2 hours to dry out.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guide-
lines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system
of the building as close to the point of cable entry as practical.
LASER SAFETY
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service
this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
T1200UA_EN.QX3 06.2.6 11:15 AM Page 4
T
ABLE OF CONTENTS
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . .2
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . .5
SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . .5
PREPARATION FOR USE . . . . . . . . . . . . . . . . . .6
ANTENNA/CABLE CONNECTIONS . . . . . . . . . . . .6
CONNECTING TO AN EXTERNAL DEVICE (FRONT)
. .6
CONNECTING TO A DIGITAL AUDIO DEVICE (REAR)
.7
INSTALLING THE BATTERIES IN REMOTE CONTROL
.7
OPERATING CONTROLS AND FUNCTIONS . . .8
TV/VCR SECTION
TV OPERATION AND SETTINGS . . . . . . . . . . . .9
WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . .9
SLEEP TIMER / PICTURE CONTROL . . . . . . . . . . .9
CLOCK SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .10
DAYLIGHT-SAVING TIME . . . . . . . . . . . . . . . . . . .11
ON-SCREEN MENU LANGUAGE . . . . . . . . . . . . .11
CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . .11
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .12
CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . .13
ON-SCREEN DISPLAY . . . . . . . . . . . . . . . . . . .14
STATUS DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . .14
CHECKING THE STATUS . . . . . . . . . . . . . . . . . . .14
MTS (Multi-channel Television Sound) SYSTEM . .14
VIDEO CASSETTE . . . . . . . . . . . . . . . . . . . . . .15
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .15
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . .16
RENTAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .16
AUTO REPEAT PLAYBACK . . . . . . . . . . . . . . . . . .16
SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . .16
ZERO RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . .16
PICTURE SEARCH . . . . . . . . . . . . . . . . . . . . . . . .17
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . .17
INDEX SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . .17
RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . .18
NORMAL RECORDING . . . . . . . . . . . . . . . . . . . . .18
OTR (One Touch Recording) . . . . . . . . . . . . . . . . .18
AUTOMATIC TIMER RECORDING . . . . . . . . . . . .19
AUTO RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . .21
AUTO REWIND-EJECT . . . . . . . . . . . . . . . . . . . . .21
COPYING A VIDEO CASSETTE (from another source)
.21
DVD SECTION
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . .22
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . .22
UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . .22
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . .23
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .23
DISC MENU / TITLE MENU . . . . . . . . . . . . . . . . . .23
SPECIAL PLAYBACK FUNCTIONS & SETTINGS . . .
24
FUNCTION TABLE . . . . . . . . . . . . . . . . . . . . . . . .24
AUDIO MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . .25
ANGLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
BLACK LEVEL MENU . . . . . . . . . . . . . . . . . . . . . .26
V. S.S (Virtual Surround System) . . . . . . . . . . . . . .26
SEARCH MENU . . . . . . . . . . . . . . . . . . . . . . . . . .26
REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .27
PROGRAMMED PLAYBACK . . . . . . . . . . . . . . . . .28
RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . .28
ON-SCREEN INFORMATION . . . . . . . . . . . . . .28
CHANGING THE DVD SET UP ITEMS . . . . . . .29
CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . .29
INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . .32
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . .34
APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
CABLE CHANNEL DESIGNATIONS . . . . . . . . . . .35
LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . .35
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .36
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . .37
WARRANTY . . . . . . . . . . . . . . . . . .BACK COVER
5
EN
IMPORTANT SAFEGUARDS / TABLE OF CONTENTS
TV/VCRTV/VCR
QUICK
SYMBOLS USED IN THIS MANUAL
The following symbols below appear in some headings and notes in this manual, with the following meanings.
Description refers to TV/VCR
operation (in the TV/VCR mode).
Description refers to playback of
DVD video discs (in the DVD mode).
Description refers to playback of
audio CDs (in the DVD mode).
Description refers to the items
to be set by the QUICK mode
(in the DVD mode).
T1200UA_EN.QX3 06.2.6 11:15 AM Page 5
EN
6
P
REPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
ANT.
AUDIO OUT
COAXIAL
ANT.
Cable
TV signal
Antenna
or
IN
OUT
Rear of the unit
*NOTE
(DO NOT DISCONNECT FROM BOX)
Some cable TV systems use scrambled
signals and require a special converter to
receive these channels. Consult your local
cable company.
OR
Incoming cable from home
Antenna / Cable Company
(No Cable Box)
Incoming cable from Cable Company
or Satellite Antenna
Cable Box or Satellite Box*
NOTE:
Before plugging the antenna into
the ANT. jack of the unit, check
that the pin is not bent. If it is bent,
straighten the pin as illustrated,
then plug the pin into the ANT. jack
of the unit.
Bent pin
Cable
Plug
(Needs to be
straightened)
(Straight pin)
For your safety and to
avoid damages to the unit,
unplug the antenna cable
from the ANT. jack before
moving the unit.
When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.
Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO
jacks of this unit.
Then use [SELECT] or [CH.
KK
/
LL
] until "AUX" appears on the screen.
HEADPHONE
VIDEO
L
AUDIO
R
HEADPHONE
VIDEO L - AUDIO - R
STOP/
EJECT
F.FWDREWREC/OTRCHANNEL
TV/VCR
SELECT
DVD
OPEN/
CLOSE
STOPSKIPSKIPVOLUME
POWER
PLAY
PLAY
E SEARCH D
ex.
VCR or video
camera
, etc.
Front of the unit
Audio Cable (commercially available)
To the Audio output jacks
To the Video output jack
Video Cable (commercially available)
NOTE:
When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR
(another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.
AUX
(OUT)
(IN)
(OUT)
(IN)
CONNECTING TO AN EXTERNAL DEVICE (FRONT)
Plug the incoming cable into the ANT. jack on the rear of the unit.
If your cable service supplies you with a converter box or if you use a satellite system, connect the box with
this unit as shown below.
T1200UA_EN.QX3 06.2.6 11:15 AM Page 6
EN
AUDIO OUT
COAXIAL
To Coaxial digital
Audio input jack
Audio coaxial digital cable
(commercially available)
To AUDIO OUT
COAXIAL jack
(DVD AUDIO OUT Only )
Dolby Digital
decoder
AUDIO OUT
COAXIAL
or
MD deck,
DAT deck, etc.
To Coaxial digital
Audio input jack
7
You can connect this unit to a digital audio device to enjoy the digital audio of DVD. Connect to an amplifier
equipped with digital input jacks, such as MD deck or DAT deck. To play a DVD disc in a Dolby Digital Multi-
channel surround format in this unit, connect to a Dolby Digital decoder.
Use an audio coaxial digital cable (commercially available) for the audio connections.
CONNECTING TO A DIGITAL AUDIO DEVICE (REAR)
(OUT)
(IN)
(IN)
NOTES:
• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an
MD or DAT deck.
• Be sure to turn off the power to all devices in the system before connecting another device.
• Refer to the Owner's Manuals for the devices to be connected to the unit.
• To connect to a MD or DAT deck, set "DOLBY DIGITAL" to "PCM" for the audio output in the setup mode, and to con-
nect to a Dolby Digital decoder, set to "BITSTREAM" (Refer to "AUDIO SETTING" on page 30). Playing a unit using
incorrect settings may generate noise distortion and may also damage the speakers.
21 3
INSTALLING THE BATTERIES IN REMOTE CONTROL
1) Open the battery compartment cover by pressing
the cover on the remote unit in the direction of
the arrow.
2) Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3) Replace the cover.
[BATTERY PRECAUTIONS]
Be sure to follow the correct polarity as indicat-
ed in the battery compartment. Reversed batter-
ies may cause damage to the device.
Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
If the device is not to be used for a long period
of time, remove the batteries to prevent damage
or injury from possible battery leakage.
Do not try to recharge batteries not intended to
be recharged; they can overheat and rupture.
PREPARATION FOR USE
T1200UA_EN.QX3 06.2.6 11:15 AM Page 7
EN
[FRONT PANEL]
01
POWER Button
[TV/VCR P.9 / DVD P.23]
02
VOLUME
K
/
L
Buttons
[P.9]
03
SKIP H / G Buttons
[DVD P.26]
SEARCH E / D Buttons
[DVD P.23]
04
PLAY B Button
[TV/VCR P.15 / DVD P.23]
05
STOP C Button
[DVD P.23]
06
OPEN/CLOSE A Button
[DVD P.23]
07
Disc loading tray
08
DVD Indicator
09
SELECT Button
[TV/VCR P.9]
10
TV/VCR Indicator
11
CHANNEL
K
/
L
Buttons
[TV/VCR P.9]
12
Recording Indicator
13
REC/OTR Button
[TV/VCR P.18]
14
REW E Button
[TV/VCR P.15]
15
F.FWD D Button
[TV/VCR P.15]
16
STOP/EJECT C A Button
[TV/VCR P.15]
17
Remote sensor window
18
HEADPHONE Jack
19
VIDEO input Jack
[P.6]
20
AUDIO L/R input Jacks
[P.6]
21
Cassette compartment
[REMOTE CONTROL]
22
POWER Button
[TV/VCR P.9 / DVD P.23]
23
PICTURE/SLEEP Button
[TV/VCR P.9]
24
Number Buttons
[TV/VCR P.9 / DVD P.26]
25
DISPLAY Button
[TV/VCR P.14 / DVD P.28]
26
SPEED Button
[TV/VCR P.18]
27
TV/VCR Audio Button
[TV/VCR P14]
28
PLAY B Button
[TV/VCR P.15 / DVD P.23]
29
REV E Button
[TV/VCR P.15 / DVD P.23]
SKIP
H Button
[DVD P.26]
30
PAUSE F Button
[TV/VCR P.15 / DVD P.23]
31
TITLE Button
[DVD P.23]
32
CLEAR Button
[TV/VCR P.9 / DVD P.26]
33
MODE Button
[DVD P.24]
34
REC Button
[TV/VCR P18]
35
SELECT Button
[TV/VCR P.9]
36
CH.
K
/
L
Buttons
[TV/VCR P.9]
37
VOL.
X
/
Y
Buttons
[TV/VCR P.9]
38
MUTE Button
[TV/VCR P.9]
39
SET-UP Button
[TV/VCR P.10 / DVD P.29]
40
FWD D Button
[TV/VCR P.15 / DVD P.23]
SKIP
G Button
[DVD P.26]
41
STOP C Button
[TV/VCR P.15 / DVD P.23]
42
DISC MENU Button
[DVD P.23]
43
ENTER Button
[TV/VCR P.10 / DVD P.23]
44
K
/
L
/{ / B Buttons
[TV/VCR P.9 / DVD P.23]
45
RETURN Button
[TV/VCR P.10 / DVD P.25]
NOTES:
• We do not recommend the use of universal remote con-
trols as it does not control all the functions. Note that the
code number given by universal remote controls may
not program with this unit. For more details, contact the
manufacturer of the universal remote control.
Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
O
PERATING CONTROLS AND FUNCTIONS
8
SEARCH
DVD TV/VCR
12 4 5 6 107 1514983 3 41213 212019181711 16
DVD buttonsDVD buttons TV/VCR buttonsTV/VCR buttons
POWER
PICTURE/
SLEEP
SELECT
REC
DISPLAY
+100
VOL.
SET-UP MUTE
SPEED
TV/VCR Audio
CH.
SLOW
PAUSE TITLE
CLEAR
MODE
ENTER
DISC MENU
RETURN
REV
PLAY
STOP
FWD
1
5
2
3
64
7 8 9
+10
0
22
23
24
25
26
27
28
29
30
31
32
33
45
44
43
42
41
39
38
37
36
34
35
40
- REMOTE CONTROL -
- FRONT PANEL -
T1200UA_EN.QX3 06.2.6 11:15 AM Page 8
VOLUME 20
C C C C C C C C C C C C C C C C
1 After antenna or cable connection is
completed, connect the power cord into
a standard AC outlet.
2 Press [POWER] to turn on the unit.
3 Use [CH.
K
/
L
] or the Number buttons to
select your desired channel number.
4 Use [VOL.
X
/
Y
] to adjust the volume.
Press
[MUTE] to instantly
mute the sound. Press it again
to restore the previous sound
level.
NOTE:
•Even if you turn off the unit in the DVD mode, the unit
will be in the TV/VCR mode when you turn it on again.
TO WATCH CABLE OR SATELLITE CHANNEL
If the unit is connected to a cable box or satellite
box, use
[CH. K / L] to select CH3 or CH4 accord-
ing to the output channel setting of the device and
select desired channel on that device.
TO WATCH EXTERNAL INPUT
When an external equipment is
connected to the front AUDIO/
VIDEO input jacks, press
[SELECT] or [CH. K / L] repeat-
edly until "AUX" appears on the
screen.
NOTE:
If there is no signal input from the antenna terminal
and no operation for 15 minutes, the unit will turn
itself off automatically.
EN
AUX
SLEEP 0 MINUTE
BRIGHT
PP PP PP PP PP PP PP CC PP PP PP PP PP PP PP
+
SLEEP TIMER SETTING
The Sleep Timer function is used to turn off the
unit without pressing
[POWER] after a desired time.
1 Press [PICTURE / SLEEP] to
display the Sleep Timer menu.
2 Within 5 seconds, set your desired sleep time
using
[s / B].
[B]...Increase by 30 min. (Up to 120 min.)
[s]...Decrease by 30 min.
NOTE:
•To cancel the Sleep Timer, use [CLEAR] or [s / B]
to set the time to "0".
3 To confirm the remainder time to shutdown,
press
[PICTURE / SLEEP].
PICTURE CONTROL
1 Press [PICTURE / SLEEP]
repeatedly until desired control
is displayed.
2 Use [s / B] to adjust to your desired level within
5 seconds.
• Even if any power failure occurs, the unit will
retain its memory for this feature.
COLOR
TINT
SHARPNESS
BRIGHT
CONTRAST
to pale
to purple
to soft
to decrease brightness
to decrease contrast
to brilliant
to green
to clear
to increase brightness
to increase contrast
TV/VCRTV/VCR
9
T
V OPERATION AND SETTINGS
TV/VCR SECTION
WATCHING A TV PROGRAM
TV/VCRTV/VCR
OPERATING CONTROLS AND FUNCTIONS / TV OPERATION AND SETTINGS
TV/VCR SECTION
SLEEP TIMER / PICTURE CONTROL
You can set Sleep Timer and picture
adjustment with
[PICTURE / SLEEP].
The menu changes as described below every time
you press [PICTURE / SLEEP].
Sleep Timer
BRIGHT
CONTRAST
COLOR
TINTSHARPNESS
To use the number buttons
Single digit channels: (Ex. 02, 03, 04 and so on)
Press [0] first to select a single digit channel.
•Two digit channels: (Ex. 12, 38, 95 ...)
Press two digits directly.
•Tree digit channels: (Ex. 115, 125 ...)
Press
[+100] first, then press the last two digits.
T1200UA_EN.QX3 06.2.6 11:15 AM Page 9
10
EN
- TV/VCR SETUP -
TIMER PROGRAMMING
B SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– SETTING CLOCK –
B AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
– SETTING CLOCK –
AUTO CLOCK [ON]
B AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T. [OFF]
AUTOMATIC CLOCK SETTING
NOTES:
If a cable converter box is being used, make sure it is
turned on.
•You must use the remote control for the clock setting.
If the unit is connected directly to a cable converter
box or satellite box, the local PBS station must be
selected on the cable box itself and the unit must be
set to the output channel of the cable converter box
or satellite box (usually channel 3 or 4), to enable to
set up or correct the clock automatically.
1 Press [SET-UP].
Using
[
KK
/
LL
] select "SETTING
CLOCK", then press
[ENTER].
2 Press [ENTER] to select "ON".
3 Press [
LL
] to select
"AUTO CLOCK CH SEARCH".
Then press
[ENTER].
The unit begins searching for
the station which contains the
auto clock set signal. The
search for a signal may take up
to 20 seconds per channel.
When the search has finished,
"_ _" appears at the lower left of
the screen.
NOTES:
During AUTO CLOCK CH SEARCH, the picture may
be distorted.
If no number appears on the TV screen, there are no
stations in your area which contain the Auto Clock
signal. Auto Clock Setting is not possible. Please use
Manual Clock Setting on this page.
4 Write down the numbers that appear on the
screen. They are the auto clock stations in your
area.
5 Press [RETURN] to go back to
"SETTING CLOCK" menu.
Press [
LL
] to select
"AUTO CLOCK CH".
Use
[s / B] until you locate an
auto clock station number.
6 Press [SET-UP] to exit the menu.
NOTE:
Once the unit is turned off, it will periodically check
and set the correct date and time.
– AUTO CLOCK CH SEARCH –
08 10 13
_ _
- TV/VCR SETUP -
TIMER PROGRAMMING
B SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
5:40 PM
CLOCK SET UP
Set the unit clock correctly for VCR timer
recording. We suggest that you should
set the clock manually when you first set up the
unit, then set the auto clock setting to "ON" to cor-
rect the time periodically.
NOTE:
If you cannot receive a station with time signals, auto
clock setting is not available. Use manual setting only.
MANUAL CLOCK SETTING
In the example below, the clock is to be set to:
DATE: May 5th, 2006
SETTING TIME: 5:40PM
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"SETTING CLOCK", then
press
[ENTER].
2 Use [
KK
/
LL
] to point to
"MANUAL CLOCK SET", then
press
[ENTER].
If there is no local PBS station in
your area or on your cable sys-
tem, select "AUTO CLOCK" and press
[ENTER]
to turn "OFF" the function before this step.
3 Use [
KK
/
LL
] to set your
desired month, day, year, hour
and minute.
Use
[s / B] to move to
another item.
4 Press [SET-UP].
Although seconds are not
displayed, they begin counting
from 00 when you press
[SET-UP]. Use this feature to
synchronize the clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 3 seconds, you may have to
reset the clock.
TO CHANGE CLOCK SETTING
1 Follow steps 1 to 2 above.
2 Select the item you want to change using [
BB
].
3 Enter correct numbers using [
KK
/
LL
].
4 Press [SET-UP] to start the clock.
TV/VCR SECTION
TV OPERATION AND SETTINGS
TV/VCRTV/VCR
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
B MANUAL CLOCK SET
D.S.T. [OFF]
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 5 FRI 2 0 0 6
HOUR MINUTE
0 5 : 4 0 PM
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
B AUTO CLOCK CH [ 08 ]
MANUAL CLOCK SET
D.S.T. [OFF]
T1200UA_EN.QX3 06.2.6 11:16 AM Page 10
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
CLOSED CAPTION SYSTEM
You can view specially labeled (cc) TV
programs, movies, news and pre-recorded
tapes with either a dialogue caption or text display.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"CAPTION".
2 Press [ENTER] repeatedly to
select your desired caption
mode.
CAPTION mode: You can watch dramas, movies and
news while captioning the dialogues and the contents
of news.
TEXT mode: You can watch half screen text informa-
tion if you want.
*"CAPTION2" is usually used for a second language (if
available).
3
Press [SET-UP] to exit the menu.
NOTES:
•Even if any power failure, the unit will retain its mem-
ory for this feature.
Some programs are not broadcasted with closed
captions. The unit is designed to provide error-free
closed captions with high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause caption
errors are listed below:
- Electric motor brush noise
- Weak snowy reception on TV screen
- Multiplex signal reception displaying picture
ghosts or airplane flutter
- Playback of poorly recorded
or worn VCR tapes
If the unit displays a black box on
the TV screen, this means that
the unit is set to the TEXT mode.
To clear screen, select "CAP-
TION1", "CAPTION2" or "OFF".
TO CANCEL THE CLOSED CAPTION SYSTEM
1 Press [SET-UP]. Use [
KK
/
LL
] to point to
"CAPTION".
2 Press [ENTER] repeatedly to select "OFF".
3 Press [SET-UP] to exit the menu.
11
EN
- TV/VCR SETUP -
TIMER PROGRAMMING
B SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
DAYLIGHT-SAVING TIME
TV/VCRTV/VCR
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
B D.S.T. [ON]
Select this feature and the unit clock will
automatically advance one hour in April,
then reverse one hour in October.
First Sunday of April : At 2 AM, the clock imme-
diately changes to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM will
be canceled.
Last Sunday of October : At 2 AM, the clock
immediately changes to 1 AM.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"SETTING CLOCK", then
press
[ENTER].
2 Use [
KK
/
LL
] to point to "D.S.T.".
3 Press [ENTER] to select "ON".
NOTE:
•To cancel the setting, select "OFF".
4 Press [SET-UP] to exit the menu.
TV OPERATION AND SETTINGS
TV/VCR SECTION
TV/VCRTV/VCR
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
ON-SCREEN MENU LANGUAGE
You can select the language of on-screen
menu among English, Spanish and French.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"LANGUAGE".
2 Press [ENTER] repeatedly to select "ENGLISH",
"ESPAÑOL" or "FRANÇAIS".
3 Press [SET-UP] to exit the menu.
NOTES:
This function effects only the language on the screen
menu and not the audio source.
If for some reason the menu is already in Spanish or
French, press [SET-UP], using [
KK
/
LL
] point to
"IDIOMA [ESPAÑOL]" or "LANGAGE [FRANÇAIS]",
then press
[ENTER] repeatedly to select desired lan-
guage, then press
[SET-UP].
TV/VCRTV/VCR
T1200UA_EN.QX3 06.2.6 11:16 AM Page 11
TV–PG [BLOCK]
B D [BLOCK]
L [BLOCK]
S [BLOCK]
V [BLOCK]
TV–Y [VIEW]
TV–Y7 ( ) [VIEW]
TV–G [VIEW]
B TV–PG (DLSV) [BLOCK]
TV–14 (DLSV) [BLOCK]
TV–MA ( LSV) [BLOCK]
TV–Y [VIEW]
B TV–Y7 ( ) [VIEW]
TV–G [VIEW]
TV–PG ( ) [VIEW]
TV–14 ( ) [VIEW]
TV–MA ( ) [VIEW]
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
ACCESS CODE
_ _ _ _
TV RATING SET UP
4 Use [
KK
/
LL
] to select a rating
that you wish to block.
Press [ENTER] repeatedly to
set it to "BLOCK" or "VIEW".
NOTES:
When you select a rating and set
it to "BLOCK", the higher ratings
will be blocked automatically.
The lower ratings will be avail-
able for viewing.
When you set the lowest rating to
"VIEW", all other ratings will be automatically avail-
able for viewing.
5 The TV-Y7, TV-PG, TV-14 and
TV-MA ratings have the option
of sub rating categories.
Use
[
KK
/
LL
] to select a rating
with sub-ratings, then press
[ENTER] twice.
6 Use [
KK
/
LL
] to select a sub-
rating, then press
[ENTER] to
set it to "BLOCK" or "VIEW".
NOTE:
•The blocked sub-ratings will
appear next to the rating cate-
gory in the "TV RATING" menu.
7 Press [SET-UP] to exit the menu.
Selection Rating Category Explanations
TV-Y7
FV Fantasy Violence
TV-PG, TV-14, TV-MA
D
Suggestive Dialog (TV-PG, TV-14 only)
L Coarse Language
S Sexual Situation
V Violence
Selection Rating Category Explanations
TV-Y Appropriate for all children
TV-Y7
Appropriate for children seven and older
TV-G General Audience
TV-PG Parental Guidance suggested
TV-14 Unsuitable for children under 14
TV-MA Mature audience only
V-CHIP SET UP
This feature enables parents to prevent
their children from watching inappropriate
material on TV. When you try to access a blocked
program, “PROTECTED PROGRAM by ... mes-
sage appears on the TV screen.
NOTE:
•To change the rating, the TV
must be turned to an unprotect-
ed program. If the screen on the
right is displayed, change the
channel to a station that is not
protected.
1 Press [SET-UP].
Use
[
KK
/
LL
] to select
"V-CHIP SET UP", then press
[ENTER].
2 Use the Number buttons to
enter the access code.
•For the first time set-up or in
the event the unit has lost
power, enter the default code of 0000.
3 Use [
KK
/
LL
] to select "TV RATING", "MPAA
RATING" or "CHANGE CODE", then press
[ENTER].
Refer to the pages below to set up each item.
12
EN
B TV–Y [VIEW]
TV–Y7 ( ) [VIEW]
TV–G [VIEW]
TV–PG ( ) [VIEW]
TV–14 ( ) [VIEW]
TV–MA ( ) [VIEW]
TV/VCRTV/VCR
PROTECTED PROGRAM
by TV-Y
TV/VCR SECTION
TV OPERATION AND SETTINGS
TV–Y [VIEW]
TV–Y7 ( ) [VIEW]
B TV–G [BLOCK]
TV–PG (DLSV) [BLOCK]
TV–14 (DLSV) [BLOCK]
TV–MA ( LSV) [BLOCK]
A
– V-CHIP SET UP –
B TV RATING
MPAA RATING
CHANGE CODE
A
B
C
P 12
P 13
P 13
T1200UA_EN.QX3 06.2.6 11:16 AM Page 12
G [VIEW]
PG [VIEW]
PG–13 [VIEW]
B R [BLOCK]
NC–17 [BLOCK]
X [BLOCK]
CH 15
NO TV SIGNALS
13
EN
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
B CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
CHANGE ACCESS CODE
4 Use the Number buttons to
enter your desired access
code in the "NEW CODE",
then enter the same code in
the "CONFIRM CODE". When
completed, the menu will
return to "V-CHIP SET UP".
5 Press [SET-UP] to exit the menu.
NOTE:
•Your personal access code will be erased and will
return to the default (0000) when a power failure
occurs or when you turn off the power using a wall
switch. If you forget the code, unplug the power cord
for 10 seconds to restore the access code to 0000.
C
NEW CODE
X X X X
CONFIRM CODE
_ _ _ _
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
B AUTO CH PROGRAMMING
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
B CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– CHANNEL SET UP –
B ADD / DELETE CH (CATV)
AUTO CH PROGRAMMING
ADDING/DELETING CHANNELS
You can add channels that was not memorized due
to the bad reception status and also delete chan-
nels you no longer receive or seldom watch.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"CHANNEL SET UP", then
press
[ENTER].
2 Use [
KK
/
LL
] to point to
"ADD/DELETE CH", then
press
[ENTER].
3 Use the Number buttons or
[CH.
KK
/
LL
] to select your
desired channel number.
(You can also use
[
KK
/
LL
] to
enter it.)
Refer to page 9 on how to use
the Number buttons.
4 Press [ENTER] repeatedly. The channel number
changes to
red (deleted) or blue (added) every
time you press the button.
•To delete another channel, repeat steps 3 to 4.
5 Press [SET-UP] to exit the menu.
NOTE:
•To confirm that channel(s) has been deleted or
added, select it (them) using [CH.
KK
/
LL
].
08
ADD / DELETE
(Example: CH8)
MPAA RATING SET UP
4 Use [
KK
/
LL
] to point to your
desired item, then press
[ENTER] to select "BLOCK"
or "VIEW".
5 Press [SET-UP] to exit the menu.
Selection Rating Category Explanations
G General Audience
PG Parental Guidance suggested.
PG-13 Unsuitable for children under 13
R Restricted; under 17 requires acco-
mpanying parent or adult guardian
NC-17 No one under 17 admitted
X Mature audience only
B
CHANNEL SET UP
Channel presetting is necessary at the start or in case you moved the TV to a different area.
TV OPERATION AND SETTINGS
TV/VCR SECTION
TV/VCRTV/VCR
(Example)
AUTO CHANNEL PROGRAMMING
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"CHANNEL SET UP", then
press
[ENTER].
2 Use [
KK
/
LL
] to point to "AUTO
CH PROGRAMMING", then
press
[ENTER].
The tuner scans and memorizes all the active
channels in your area.
3 When the scanning is comple-
ted, the lowest memorized
channel is displayed.
If "NO TV SIGNALS" appears
on the TV screen, check the
antenna connection and try
again.
NOTES:
The unit may recognize CATV channels to be TV
channels if reception condition is poor. In this case,
check the antenna connection and try "AUTO CH
PROGRAMMING" again.
Auto channel programming is NOT necessary
when connected to a cable box or satellite box.
Just select the channel for cable box or satellite
input (ex. CH3 or CH4) on the unit, then select
your desired channel on the cable box or satellite
box.
T1200UA_EN.QX3 06.2.6 11:16 AM Page 13
STEREO
WHEN RECEIVING AN MTS BROADCAST
Press [TV/VCR Audio] repeatedly to select a sound
mode when you watch or record a TV program.
The mode changes according to
the broadcast among "STEREO",
"SAP" and "MONO" every time
you press the button.
NOTES:
The initial setting is "STEREO". The unit records auto-
matically MTS broadcasts in Hi-Fi stereo sound unless
you select "SAP" beforehand.
If you select "SAP" when second audio is not available,
the unit will record in normal audio.
This setting returns to the initial value when you turn off
the unit or unplug the power cord.
14
EN
O
N SCREEN DISPLAY
MTS (Multi-channel Television Sound) SYSTEM
MTS allows for reception of sound other than the main audio program. You can listen or record
monaural audio sound, stereo sound or Secondary Audio Program (SAP).
WHEN PLAYING CASSETTES
Press [TV/VCR Audio] repeatedly to select "HIFI"
or "MONO".
This setting is saved until the cassette is ejected.
NOTE:
The initial setting is "HIFI". When you play non-HIFI tapes,
the unit will play only in the monaural mode even if the
setting is "HIFI".
WHEN IN THE EXTERNAL INPUT
(
"AUX"
)
MODE
Any output mode setting does not affect the audio
output, and the current audio output mode does not
appear on the TV screen.
STATUS DISPLAY
TV/VCRTV/VCR
On screen display examples are shown
below.
1. VCR status
Displays the current VCR motion:
PLAY / STOP / REC / OTR / PAUSE / FF / REW
2. VCR sound mode status (during playback)
Displays "HIFI" when the tape is recorded in
Hi-Fi stereo mode.
3. Tape speed (during recording)
Displays the tape speed: SP / SLP
4. Clock
5. Channel number
(in TV mode)
Displays the current channel number.
"AUX" is displayed in external input mode.
6. MTS status (in TV mode)
Displays the current sound status of the broad-
cast: STEREO / SAP
7. Tape counter (during playback or recording)
Shows the elapsed recording or playback time.
(Not available for a blank tape or blank portions
on the tape.) You can reset the counter by press-
ing
[CLEAR].
PLAY B 12:00AM
HIFI CH 123
STEREO/SAP
SP COUNT 0:00:00
4
2
3
1
5
6
7
CHECKING THE STATUS
While receiving a broadcast or playing a
VHS tape, you can check the status dis-
played on the screen by pressing
[DISPLAY].You
can also check the status of the preset MTS (Multi-
Channel Television sound). The display will change
as shown below each time you press
[DISPLAY].
WHEN THE CLOSED CAPTION IS OFF
The display switches among VCR counter and clock.
WHEN THE CLOSED CAPTION IS ON
The display switches among VCR counter and clock.
STOP
SP COUNT 0:12:34
5:40PM
CH2
Display OFF CLOCK/COUNTER
display
*The display will disappear
after 5 seconds
STOP
STOP
SP
SP
COUNT 0:12:34
COUNT 0:12:34
5:40PM
CH2
5:40PM
CH2
After 5 seconds
After 5 seconds
Display OFF
COUNTER display CLOCK display
TV/VCRTV/VCR
TV/VCRTV/VCR
TV/VCR SECTION
T1200UA_EN.QX3 06.2.6 11:16 AM Page 14
PLAY
B
STOP
REW
E
FF
D
15
EN
V
IDEO CASSETTE
This unit will operate with any cassette that has the
mark. For best results, we recommend the
use of high-quality tapes. Do not use poor quality or
damaged tapes.
SELECTING TAPE SPEEDS
Before recording, select the tape speed from : SP
mode
(Standard Play) or SLP mode (Super Long
Play). You can also play a tape recorded in
LP mode
(Long Play).
ERASE PREVENTION
Break off the tab on the
back edge of the cassette
to prevent accidental eras-
ing of recording.
Cover the hole with plastic
tape to record on the tape
again.
NOTES:
In the TV/VCR mode, if the cassette without tab is insert-
ed, playback will start automatically.
If you press [REC/OTR] or [REC] when a cassette with-
out tab is inserted, the unit will eject it automatically.
Tab
Plastic Tape
P
LAYBACK
BASIC PLAYBACK
TV/VCRTV/VCR
ON SCREEN DISPLAY / VIDEO CASSETTE / PLAYBACK
TV/VCR SECTION
Tape Speed Recording/Playback time
T120 T160T60Type of tape
2 hours 2-2/3 hours1 hourSP mode
6 hours 8 hours3 hoursSLP mode
EJECT
A
TRACKING ADJUSTMENT
•Tracking adjustment will be set automatically when
you start playback (Digital tracking function).
If noise lines (black and white streaks) appear on
the playback picture, use
[CH.
KK
/
LL
] until the
streaks disappear (Manual tracking adjustment).
This is available in Pause/Still/Slow mode, too.
•To release manual tracking mode, stop the tape
once and start playback again.
STILL PICTURE
During playback, press [PAUSE F] to freeze the
picture.
You can advance the picture frame by frame by
pressing
[PAUSE F] repeatedly.
•To release the Still mode, press
[PLAY
BB
].
SLOW MOTION
During playback, press [PAUSE F] then press
[FWDD].
•To release the Slow mode, press
[PLAY
BB
].
NOTE:
If the unit keeps the slow mode or still mode for more
than 5 minutes, it will automatically enter the stop mode.
1 Insert a pre-recorded tape so that the
unit turns on automatically (Auto
Power On).
2 Select TV/VCR mode by pressing [SELECT].
NOTE:
If the erase-prevention tab has been removed, the
unit will change the VCR mode and starts playbak
automatically.
3 To start playback,
press
[PLAY
BB
].
NOTE:
•Even in the DVD mode, you can start the VCR play-
back if you press [PLAY
BB
] on the front panel (of
the TV/VCR side).
4 To stop the playback,
press
[STOP
CC
].
5 To rewind the tape,
press
[REVE].
To forward the tape,
press
[FWDD].
To stop winding, press
[STOP
CC
].
6 To eject the tape from the unit,
press
[STOP/EJECT C A]
on the front panel.
T1200UA_EN.QX3 06.2.6 11:16 AM Page 15
COUNT 0:00:00
REPEAT PLAY B
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
USER’S SET UP
B RENTAL [ON]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
RENTAL PLAY B
16
EN
S
PECIAL PLAYBACK
USER’S SET UP
RENTAL [OFF]
B REPEAT PLAY [ALL]
AUTO RETURN [OFF]
RENTAL PLAYBACK
TV/VCRTV/VCR
AUTO REPEAT PLAYBACK
TV/VCRTV/VCR
This function allows you to repeat a tape
indefinitely.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"USER’S SET UP", then press
[ENTER].
2 Use [
KK
/
LL
] to point to "REPEAT PLAY".
Press
[ENTER] repeatedly
until your desired selection
"ALL" or "BLANK" appears.
ALL: Repeat playback from the
beginning to the end of the tape.
BLANK: Repeat playback from the beginning to a part,
which is blank for more than 10 seconds.
OFF: Cancel repeat playback.
3 Press [SET-UP] to exit the menu.
4 Press [PLAY B] to start the
Repeat Play.
NOTES:
If the rental mode is set to "ON", “RENTAL PLAY B
display has priority.
This setting will not change even if you turn off the
unit.
S
EARCH FUNCTION
ZERO RETURN
TV/VCRTV/VCR
This function allows you to search easily
a beginning point that you want to review
by rewinding or fast forwarding.
NOTE:
Zero Return WILL NOT work on a blank tape or a blank
portion of a tape.
1 Rewind or forward the tape to the beginning
point at which you want to review.
2 Press [CLEAR] repeatedly to
set the counter to "0:00:00".
3 Press [PLAY B] for playback or [REC] for
recording.
Press
[STOP
CC
] when playback or recording is
completed.
4 Press [SET-UP].
Use
[
KK
/
LL
] to point to "ZERO
RETURN", then press
[ENTER].
The unit will begin rewinding
and the counter will appear on the TV screen.
The tape will automatically stop when the
counter returns to 0:00:00 (approx.).
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B ZERO RETURN
TIME SEARCH
INDEX SEARCH
TV/VCR SECTION
This function enables you to improve the
picture quality when playing back worn
cassettes such as rented tapes.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"USER’S SET UP", then press
[ENTER].
2 Use [
KK
/
LL
] to point to
"RENTAL".
Press
[ENTER] to select "ON".
NOTE:
•To cancel the setting, select "OFF" at this step.
3 Press [SET-UP] to exit the menu.
4 Press [PLAY B] to start
playback.
NOTE:
This setting will not change even if you turn off the
unit.
T1200UA_EN.QX3 06.2.6 11:16 AM Page 16
17
EN
INDEX SEARCH
0 3
TIME SEARCH
2 : 50
TIME SEARCH
TV/VCRTV/VCR
This function allows you to quickly
advance the tape to your desired posi-
tion simply by entering the exact amount of playback
time you want to skip.
In the example below: To watch a program before/
after 2 hour 50 minutes from the present position,
in either direction.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to "TIME
SEARCH", then press
[ENTER].
2 Use [
KK
/
LL
] until your desired
time appears.
To cancel the Time Search at
this point, press
[SET-UP].
NOTE:
Time Search can be set up to a maximum of 9 hours
50 minutes (9:50) by 10 minutes at a time.
3 Use [
ss
/
BB
] to rewind or fast forward to the
specified point.
The time counts down during the search. When
the counter reaches "0:00:00", the tape will start
playback automatically.
TO CANCEL DURING TIME SEARCH
Press [STOP/EJECT C A] on the unit or [STOP
CC
].
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
B TIME SEARCH
INDEX SEARCH
INDEX SEARCH
TV/VCRTV/VCR
This function allows you to index the
starting point to make it easy to reach
the point in either fast forward or rewind mode.
•Every time you start recording
, an index is marked
automatically. The index mark also works as the
starting point of Timer recording and OTR.
The index mark will not be recorded if
[PAUSE
FF
]
is used during recording.
The time gap between making the index marks on
the tape should be greater than 1 minute for SP
recording, 2 minutes for LP recording and 3 min-
utes for SLP recording.
In some cases, the index mark at the beginning of
video tape cannot be detected.
Example: You are watching program number 4 and
want to fast forward to program number 7. Skip
three programs.
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
B INDEX SEARCH
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"INDEX SEARCH", then press
[ENTER].
2 Use [
KK
/
LL
] until the number
of programs that you want to
skip appears.
3 Use [
ss
/
BB
]. The unit begins rewinding or fast
forwarding to the beginning of desired program.
4 When the search is completed, the unit will start
playback automatically.
The numbers of Index Search can be set up to
20.
This function is not available during recording.
TO CANCEL DURING INDEX SEARCH
Press [STOP/EJECT C A] on the unit or [STOP
CC
].
PICTURE SEARCH
TV/VCRTV/VCR
This function is useful in finding or
skipping over a particular scene on a
tape. In this mode, the sound will be muted.
1 During playback, press [REV
EE
] or [FWD
DD
]
to view at a high speed (in forward/reverse).
2 Press [REV
EE
] or [FWD
DD
] again to view at
super high speed (in LP/SLP modes only).
NOTE:
•Tapes recorded in the SP or LP mode will normally
display a noise bar on the TV screen and the picture
may revert to black and white.
3 Press [PLAY
BB
] to return to normal playback.
SPECIAL PLAYBACK / SEARCH FUNCTION
TV/VCR SECTION
T1200UA_EN.QX3 06.2.6 11:16 AM Page 17
EN
18
R
ECORDING
NOTES:
Insert a cassette tape with its erase-prevention tab in place.
This unit cannot record the contents from the built-in DVD.
•You can ONLY watch the same TV program that is being
recorded.
NORMAL RECORDING
TV/VCRTV/VCR
SP
1 Use [CH.
KK
/
LL
] or the Number
buttons
to select the channel to
be recorded.
NOTE:
If the unit is connected to a cable box or satellite
box, the unit must be on CH3 or CH4. Select the
channel to be recorded on the cable box or satellite
box.
2 Press [SPEED] to select the
desired tape speed (SP/ SLP).
(Refer to "SELECTING TAPE
SPEEDS" on page 15.)
3 Press [REC] to start recording.
4 Press [PAUSE
FF
] to tempo-
rarily stop recording unwanted
scenes.
Press
[PAUSE
FF
] again or
[REC] to resume recording.
NOTE:
If the recording is paused for more than 5 minutes,
the unit will automatically switch to the recording
mode to prevent tape damage.
5 Press [STOP
CC
] to stop recording.
OTR (One Touch Recording)
TV/VCRTV/VCR
This function enables you to start record-
ing for specified length simply by press-
ing
[REC/OTR] on the unit.
1 Use [CH.
KK
/
LL
] or the Number buttons to
select the channel to be recorded.
NOTE:
If the unit is connected to a cable box or satellite
box, the unit must be on CH3 or CH4. Select the
channel to be recorded on the cable box or satellite
box.
2 Press [SPEED] to select the desired tape speed
(SP/SLP).
(Refer to "SELECTING TAPE SPEEDS" on page 15.)
3 Press [REC/OTR] on the unit
repeatedly until your desired
length appears on the screen.
The recording time will increase
by 30 minutes up to 8 hours.
Recording starts immediately when you press
[REC/OTR].
NOTE:
If you press [REC/OTR] when "8:00" is displayed,
the unit returns to the normal recording mode.
NOTES:
•Even if you press [POWER] during OTR, the unit
continues recording.
•You
cannot start OTR with the remote control.
In the SLP mode, maximum recording time, assum-
ing the tape starts at the beginning, is 8 hours using
T-160 (or 6 hours using T-120).
If the tape runs out before the end time, the unit will
switch to the stop mode immediately, eject the tape
and turn itself off.
•To show the remaining time of OTR, press
[DISPLAY]
on the remote control to display "OTR" on the TV
screen. (It will show up momentarily then disappear.)
TO CANCEL OTR IN PROGRESS
Press [STOP/EJECT C A] on the unit or [STOP
CC
].
Time(s) Display Recording length
1 time (normal recording)
2 times 0:30 30 minutes
3 times 1:00 60 minutes
↓↓
17 times 8:00 480 minutes
CH 10
REC
SP
PAUSE
SP
OTR (2 : 30)
SP
TV/VCR SECTION
T1200UA_EN.QX3 06.2.6 11:16 AM Page 18
TIMER REC STANDBY
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 7/03 MON 7:30
P
M
8:50
P
M
- -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 7/03 MON 7:30
P
M
8:50
P
M
SP
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- TV/VCR SETUP -
B TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
19
EN
RECORDING
TV/VCR SECTION
AUTOMATIC TIMER RECORDING
TV/VCRTV/VCR
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
5 Use [
KK
/
LL
] to set the desired
begin/end hour and minute.
Press
[
BB
] to move to next item.
6 Use [
KK
/
LL
] until the desired
tape speed appears.
(Refer to "SELECTING TAPE
SPEEDS" on page 15.)
7 Press [ENTER] to complete setting.
To set another program, repeat steps 2 to 7.
•To correct the program while setting, press
[
ss
]
to go back one step and use [
KK
/
LL
] to enter
the correct numbers.
Press
[SET-UP] to exit the menu.
8 Press [POWER] to set automatic timer recording.
The recording indicator lights up.
NOTES:
•You MUST turn off the unit to activate automatic
timer recording.
If power is not turned off and
you continue watching TV,
"TIMER REC STANDBY" starts
flashing on the TV screen 2 min-
utes before the programmed
start time.
Make sure a cassette with erase-prevention tab is
inserted before turning off the unit. If the cassette does
not have the tab, it will be ejected when you press
[POWER] to turn off.
9 At the programmed start time, the unit begins
recording.
NOTES:
The recording starts without turning on the TV screen.
During recording, you can watch only currently being
recorded TV program or DVD playback.
Press
[POWER] and [SELECT] to select the desired
mode.
If the tape runs out before the end time, the recording
stops immediately and the cassette will be ejected.
TO CONFIRM THE PROGRAM
1 Press [POWER] to turn on the unit.
(The Recording indicator turns off.)
2 Press [SET-UP].
Use
[
KK
/
LL
] to select "TIMER PROGRAMMING",
then press
[ENTER].
3 Confirm the details of programs that appear on
the TV screen.
4 Press [SET-UP] to exit the menu.
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 EVRY MON -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 7/03 MON -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
You can set 8 programs to record on
specific days, daily or weekly within
1 year period.
In the example below, the timer is being set to record:
DATE: July 3rd, 2006
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
1 Press [SET-UP].
Use
[
KK
/
LL
] to select
"TIMER PROGRAMMING",
then press
[ENTER].
NOTE:
If you have not yet set the clock, "MANUAL CLOCK
SET" menu appears. Set to the present time and
date (refer to "MANUAL CLOCK SETTING" on page
10) then start setting the timer recording.
2 Use [
KK
/
LL
] to select the
desired program position, then
press
[
BB
].
3 Use [
KK
/
LL
] until the desired
channel number appears, then
press
[
BB
].
NOTE:
•If the unit is connected to a cable box or satellite box,
the unit must be on CH3 or CH4. Select the channel
to be recorded on the cable box or satellite box.
4 Set the starting date.
For once recording :
Press [
KK
] until the desired
date appears. Then press
[
BB
].
For every day recording :
To record the same channel
at the same time every day.
Press [
LL
] until "EVRY DAY"
appears, then press
[
BB
].
For weekly recording :
To record the same channel
at the same time every week.
Press [
LL
] until "EVRY" and
your desired day of the week
(Ex. Every Monday) appear,
then press
[
BB
].
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 EVRY DAY -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
T1200UA_EN.QX3 06.2.6 11:16 AM Page 19
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 7/03 MON 7:30
P
M
8:50
P
M
SP
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
20
EN
RECORDING
TV/VCR SECTION
TO CORRECT A PROGRAM AFTERWARD
1 Press [POWER] to turn on the unit.
2 Repeat steps 1 to 2 of "AUTOMATIC TIMER
RECORDING" on page 19.
3 Press [
BB
] (or press [
ss
] to go back one step)
until the part you want to correct begins flashing,
then use
[
KK
/
LL
] to make the changes.
Press
[ENTER] to confirm.
4 Press [POWER] to set automatic timer recording.
TO CANCEL A PROGRAM
1 Press [POWER] to turn on the unit.
2 If recording is in progress, press
[STOP/EJECT C A] on the unit.
3 Press [SET-UP].
Use
[
KK
/
LL
] to select "TIMER PROGRAMMING",
then press
[ENTER].
4 Use [
KK
/
LL
] to select a program you want to
cancel and press
[CLEAR].
5 Press [SET-UP] to exit the menu.
TIMER PROGRAM EXTENSION
You can shift the time schedule of an automatic timer
recording after programming or during recording.
1 Press [POWER] to turn on the unit.
2 Press [SET-UP].
Use
[
KK
/
LL
] to select "TIMER PROGRAMMING",
then press
[ENTER].
3 Press [REC] and use
[
KK
/
LL
] to select the desired
program.
4 Press [REC] repeatedly until your desired
begin/end time appears.
Each press will shift forward the begin/end time
for recording by 10 minutes.
NOTES:
When the recording is already in progress, each press
will shift forward the end time only.
If you want to cancel while setting, press
[PAUSE
FF
]
on the remote control. The recording time returns to
the original time.
When you shift forward the time schedule during
recording, the recording speed will be automatically
set to the SLP mode.
5 Press [ENTER] to complete the setting. Then
press
[SET-UP] to exit the menu.
ABOUT OVERLAP OF PROGRAMS
When programs overlap, a program may not be
recorded.
The program with an earlier start has priority.
Once the earliest program finishes, the overlapping pro-
grams will begin recording in sequence.
When the starting time is the same, the program set on
the highest position in the program list has priority.
The illustration below demonstrates the sequence of
recordings.
9:00AM 10:00AM 12:00PM
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
11:00AM
Recording Sequence
*Recording period is SHADED
T1200UA_EN.QX3 06.2.6 11:16 AM Page 20
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
USER’S SET UP
RENTAL [OFF]
REPEAT PLAY [OFF]
B AUTO RETURN [ON]
21
EN
AUTO RETURN
TV/VCRTV/VCR
This function allows you to automatically
search the beginning of the recorded
program(s) after timer recording finishes.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"USER’S SET UP",
then press
[ENTER].
2 Use [
KK
/
LL
] to point to
"AUTO RETURN", then press
[ENTER] to select "ON".
3 When all the timer recordings are completed, the
unit will rewind to the beginning of the recorded
program(s) and then turn itself off.
NOTE:
If you turn off the unit while rewinding the tape, the
AUTO RETURN will stop.
TO CANCEL THE AUTO RETURN MODE
Repeat steps 1 to 2 and press [ENTER] to select
"OFF".
• Even if any power failure occurs, the unit will
retain its memory for this feature.
RECORDING
TV/VCR SECTION
AUX
SP
COPYING A VIDEO CASSETTE
(from another source)
You can make copies of video tapes for
your enjoyment.
You CANNOT copy a DVD to a videotape.
Connect the unit and a source (for playing) device
as shown the following diagram.
WARNING: Unauthorized recordings of copyrighted
video tapes may be an infringement of copyright
laws.
1 Insert a pre-recorded video cassette into the
source device (VCR, camcorder, etc.).
2 Insert a video cassette to record into this unit’s
cassette compartment.
3 Press [SPEED] to select the
desired recording speed
(SP/SLP).
4 Press [SELECT] until "AUX"
appears on the screen.
5 Press [REC/OTR] on the unit.
6 Begin playback of the tape
in the source device.
NOTE:
•For best results during copying, use the front panel con-
trols whenever possible. The remote control might affect
the operation of the source device.
7 To stop copying, press [STOP/EJECT C A] on
the unit, then stop the playback on the source
device.
[Ex: Jacks of
source device]
Audio/Video
cables
(not supplied)
[This unit]
TV/VCRTV/VCR
AUTO REWIND-EJECT
TV/VCRTV/VCR
When the end of a tape is reached
during recording, playback, or fast-
forward, the tape will automatically rewind to the
beginning. After rewinding finishes, the unit will
eject the tape and turn itself off.
This function is operative when REPEAT PLAY is
set to "OFF".
The tape will not auto-rewind during timer record-
ing or One Touch Recording (OTR).
T1200UA_EN.QX3 06.2.6 11:16 AM Page 21
EN
A
BOUT THE DISCS
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may
not play them back. Even if they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD
recorder. However, depending on the recording status of a disc, the disc may not be played back at all
or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc
with the DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not
be played back at all or normally (the picture or sound may not be smooth, etc.).
*9: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may
not play back properly.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read
it correctly.
*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region
format can only be played back on unit with the same region code.
DVD-Video
* 1,2,4,6,
10,11
* 4,6,10
* 1,3,4,5,
6,7,9,10
DVD-RW
DVD-R
* 1,3,4,5,6,8,9,10
DVD+RW
DVD+R
Audio CD
* 4,5,6,9,10
CD-RW
CD-R
Digital
video
(MPEG2)
-
-
-
Digital
audio
Region
code
Mark (logo)
Playable
discs
Recorded
signals
Disc
size
Disc types
12 cm
or
8 cm
12 cm
or
8 cm
Example
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 1
Chapter 2
Chapter 3 Chapter 4
Example
Tr ack 1
Tr ack 2
Tr ack 5
Tr ack 6
Tr ack 3 Track 4
or
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-i / Photo CD / Video CD / DVD-Audio / DVD with region codes other than 1 or ALL /
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3
The sound MAY NOT be heard: Super Audio CD
NOTE:
Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio
CD layer cannot be delivered.
Any other discs without compatibility indications
is a trademark of DVD Format/Logo Licensing Corporation.
PLAYABLE DISCS
UNPLAYABLE DISCS
22
DVD SECTION
T1200UA_EN.QX3 06.2.6 11:16 AM Page 22
EN
23
ABOUT THE DISCS / PLAYING A DISC
DVD SECTION
P
LAYING A DISC
1 Press [POWER] to turn on the
unit.
2 Press [OPEN/CLOSE
AA
] on the unit.
3 Place the disc in the tray, with
the label facing up.
4 Press [PLAY
BB
].
The tray will close automatically and playback will
start. When you play back a DVD which features a
title menu, it may appear on the screen.
NOTES:
Closing the disc tray manually or by pressing
[OPEN/CLOSE
AA
] also starts playback.
With DVDs that use titles for playback program signals,
playback may start from the second title or it may skip
these titles.
5 To freeze the picture, press [PAUSE
FF
] during
playback.
NOTE:
The sound will be muted in pause mode.
6 Press [STOP
CC
] to stop
playback temporarily.
• Press [PLAY
BB
] to resume
the playback.
To cancel resume and stop the
disc,
[STOP
CC
] again.
NOTES:
The resume information stays on even if the unit is
turned off.
•A "prohibited icon" may appear
at the top-right on the TV screen
during operation. This means
that the operation is not available on the disc.
STEP BY STEP PLAYBACK
During playback, press [PAUSE F].
You can advance the picture frame by
frame by pressing
[PAUSE F] repeatedly.
•To return to normal playback, press
[PLAY
BB
].
BASIC PLAYBACK
DVD may contain menus to navigate the
disc and access special features.
1 Press [DISC MENU] or [TITLE].
The DVD main menu / the title menu will appear.
You can call up the menu even during playback.
2 Use [
KK
/
LL
/
ss
/
BB
] to select an item, and press
[ENTER].
NOTES:
If disc menu is available on the disc, audio language,
subtitle options, chapters for the title and other
options will appear for selection.
Contents of menu and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
DISC MENU / TITLE MENU
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Resume ON
FAST FORWARD / FAST REVERSE
During playback, press and hold
[FWD
DD
] for fast forward or
[REV
EE
] for fast reverse.
•Every time you press and hold
the button, playback speeds up
and the level of the speed
appears on the screen.
NOTES:
•For DVDs, fast forward/reverse speed is different
depending on the disc. Approximate speed is 1 (×2),
2 (×8), 3 (×20), 4 (×50) and 5 (×100).
•For Audio CDs approximate speed is 1 (
×2), 2 (×8)
and 3 (×30).
When you use buttons on the front panel, use
[SEARCH
EE
/
DD
].
•To return to normal playback, press [PLAY
BB
].
SLOW FORWARD / SLOW REVERSE
During playback, press [PAUSE
FF
].
Press and hold
[FWD
DD
] for slow for-
ward or
[REV
EE
] for slow reverse.
•Every time you press and hold
the button, playback is slowed
down and the level of the speed
appears on the screen.
NOTES:
Slow forward / reverse speed varies with the disc.
Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).
When you use buttons on the main unit, use
[SEARCH
EE
/
DD
].
•To return to normal playback, press [PLAY
BB
].
D1
1
T1200UA_EN.QX3 06.2.6 11:16 AM Page 23
EN
Setting menu switches as below every time you press
[MODE] during playback.
See the reference page for how to set each menu. Some functions are not available in specific
modes, but this is not a malfunction.
(If available)
CD
Press [MODE]
AUDIO MENU (p25)
V. S.S MENU (p26)
SEARCH MENU (p26)
REPEAT MENU (p27)
A-B REPEAT MENU (p27)
MENU OFF
AUDIO STREAM 1
...
AUDIO STREAM 8
ANGLE 1
....
ANGLE 8
OFF
SUBTITLE STREAM 1
....
SUBTITLE STREAM 32
OFF
ON
OFF
1
2
CHAPTER SEARCH
TITLE SEARCH
TIME SEARCH
MARKER SEARCH
OFF
CHAPTER
TITLE
OFF
A-
A-B
OFF
ZOOM 1 (×1.3)
ZOOM 2 (×2.0)
ZOOM 3 (×4.0)
STEREO
L-ch
R-ch
OFF
1
2
TRACK SEARCH
TIME SEARCH
MARKER SEARCH
OFF
TRACK
ALL
OFF
A-
A-B
DVD-V
Press [MODE]
AUDIO MENU (p25)
SUBTITLE MENU (p25)
ANGLE MENU (p25)
ZOOM MENU (p25)
BLACK LEVEL MENU (p26)
V. S.S MENU (p26)
SEARCH MENU (p26)
REPEAT MENU (p27)
A-B REPEAT MENU (p27)
MENU OFF
24
S
PECIAL PLAYBACK FUNCTIONS & SETTINGS
DVD SECTION
FUNCTION TABLE
T1200UA_EN.QX3 06.2.6 11:16 AM Page 24
EN
The Zoom function allows you to enlarge
the video image and to pan through the
enlarged image.
1 During playback, press
[MODE] repeatedly until
ZOOM menu appears.
2 Press [ENTER] repeatedly to select the required
zoom factor.
OFF ZOOM1(×1.3) ZOOM2(×2.0) ZOOM3(×4.0)
3 Use [
KK
/
LL
/
ss
/
BB
] to move the zoomed picture
across the screen.
4 Press [RETURN] to exit.
The zoomed position guide
appears on the right corner
of the TV screen in the zoom mode.
NOTES:
Zooming function does not work while disc menu is shown.
Zooming function is not available on some discs.
•It may take several seconds to slide the zoomed picture.
The picture may be distorted if you operate other
functions (ex. pause, fast forward etc.) repeatedly in
the zoom mode.
•To cancel the zoom mode, repeat steps 1-2 and
press
[ENTER] until "OFF" appears.
OFF (ZOOM)
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
DVD SECTION
ZOOM
AUDIO LANGUAGE
You can select audio language during DVD playback
(if multi languages are available).
1 Press [MODE] during playback.
2 Use [
KK
/
LL
] to select your desired language.
NOTES:
This function may not work on some DVDs with mul-
tiple audio languages. In this case, set it on the disc
menu. (Operation varies depending on discs. Refer to
the manual of the disc.)
When "NOT AVAILABLE" appears
on the TV screen, it means this
function is not available on the
disc.
3 Press [RETURN] to exit the menu.
STEREO SOUND MODE
You can select sound output mode.
1 Press [MODE] during
playback.
2 Use [
KK
/
LL
] to select the sound mode.
• STEREO: stereo sound with left and right channels
L-ch: left channel sound only
R-ch: right channel sound only
3 Press [RETURN] to exit the menu.
AUDIO MENU
1.ENG Dolby D 3/2.1ch 48k/3
STEREO (AUDIO)
You can select a language for subtitles
during DVD playback (if available).
1 During playback, press
[MODE] repeatedly until
SUBTITLE menu appears.
2 Use [
KK
/
LL
] to select your desired subtitle lan-
guage. To cancel subtitles, select "OFF".
3 Press [RETURN] to exit the menu.
NOTES:
This function may not work on some DVDs with mul-
tiple subtitle languages. In this case, set it on the disc
menu. (Operation varies depending on discs. Refer to
the manual of the disc.)
If the selected language does not have 3-letter code,
"---" will be displayed on the screen. (Refer to
LANGUAGE CODE LIST on page 35.)
SUBTITLE LANGUAGE
1.ENG/6
(SUBTITLE)
NOT AVAILABLE
(
AUDIO
)
Some DVD discs contain scenes which
have been shot from various angles and
you can change them as you like.
1 During playback, press
[MODE] repeatedly until
ANGLE menu appears.
2 Use [
KK
/
LL
] to select your desired angle.
3 Press [RETURN] to exit the menu.
NOTE:
If multiple angle function is not available, this menu
does not appear on the screen.
1 / 8 (ANGLE)
ANGLE MENU
25
ZOOM2OFF (ZOOM) ZOOM1 ZOOM3
T1200UA_EN.QX3 06.2.6 11:16 AM Page 25
26
EN
You can adjust the Black Level to make the
black parts of the picture brighter.
1 During playback, press
[MODE] repeatedly until
BLACK LEVEL menu
appears.
2 Use [
KK
/
LL
] to select "ON" or "OFF".
• ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
(Initial setting)
3 Press [RETURN] to exit the menu.
NOTE:
The setting will be saved even if the unit is turned off.
OFF (BLACK LEVEL)
BLACK LEVEL MENU
You can enjoy surround-sound effect
over two speakers on this unit.
1 During playback, press
[MODE] repeatedly until
V.S.S menu appears.
2 Use [
KK
/
LL
] to select the desired sound effect.
• 1: Natural effect
2: Emphasized effect
OFF: No effect (Initial setting)
3 Press [RETURN] to exit the menu.
NOTES:
When playing back 96kHz with Virtual Surround func-
tion, the sound will be down sampled at 48kHz and
output as digital audio.
(for CD play only)
Virtual Surround System will be effective only when
you set the sound mode to "STEREO". (Refer to
"STEREO SOUND MODE" on page 25.)
OFF (V.S.S.)
V.S.S (Virtual Surround System)
DVD SECTION
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
You can begin playback at a specific track, title,
chapter or from a specific point on a disc.
TRACK SEARCH
1 During playback, press [MODE]
repeatedly until SEARCH
menu appears.
2 Within 60 seconds, use the Number buttons to
select the desired track number. Playback will
start from the selected track.
NOTES:
•For single digit press [0] first, if the total track of the
disc is 10 tracks or more.
During playback or pause, you can also select tracks
by skipping with
[H / G] (or [SKIP H / G] on
the front panel), or entering the desired track number
with the Number buttons.
3 Press [RETURN] to exit the menu.
CHAPTER SEARCH
1 During playback, press
[MODE] repeatedly until
SEARCH menu appears.
2 Use the Number buttons to enter the desired
chapter number. Playback will start at the selected
chapter.
• Press
[CLEAR] to erase the incorrect input.
• For single digit press
[0] first, if the total number of
chapters of the disc is 10 or more.
3 Press [RETURN] to exit the menu.
TITLE SEARCH
1 During playback, press [MODE] repeatedly until
SEARCH menu appears.
2 Use [
KK
/
LL
] to display
TITLE SEARCH menu.
3 Use the Number buttons to enter the desired title
number. Playback will start at the selected title.
• Press
[CLEAR] to erase the incorrect input.
• For single digit press
[0] first, if the total number of
titles of the disc is 10 or more.
4 Press [RETURN] to exit the menu.
SEARCH MENU
_/2 (SEARCH)
__/12 (SEARCH)
_ _/21 (SEARCH)
T1200UA_EN.QX3 06.2.6 11:16 AM Page 26
TIME SEARCH
1 During playback, press [MODE] repeatedly until
SEARCH menu appears.
2 Use [
KK
/
LL
] repeatedly to
display TIME SEARCH menu.
3 Within 60 seconds, use the Number buttons to
enter a desired disc time. Playback will start at
the specified time.
• Press
[CLEAR] to erase the incorrect input.
When there is no need to enter a number, "0"
appears automatically.
4 Press [RETURN] to exit.
MARKER SEARCH
You can set markers to memorize your favorite
places on a disc.
1 During playback, press [MODE] repeatedly until
SEARCH menu appears.
2 Use [
KK
/
LL
] repeatedly to
display MARKER SEARCH
menu.
3 Use [
ss
/
BB
] to select a marker number among
1 to 10.
4 When the track (or title) reaches your desired
point, press
[ENTER] to set a marker.
The track (or title) number and
elapsed playing time will appear
on the TV screen.
5 You can play from the desired point by selecting
the marker number by using
[
ss
/
BB
] and then
pressing
[ENTER].
6 To clear a marker, select the marker number and
press
[CLEAR].To clear all markers at once,
select "AC" with
[
ss
/
BB
] and press [ENTER].
NOTE:
The following operation will also erase all markers:
– Opening the disc tray
Turning off the power
– Pressing
[SELECT]
7 Press [RETURN] to exit the menu.
27
EN
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
DVD SECTION
0:0 _:_ _ 0:04:23
TOTAL
REPEAT PLAYBACK
REPEAT TRACK
1 During playback, press
[MODE] repeatedly until
REPEAT menu appears.
2 Use [
KK
/
LL
] to select your desired repeat mode.
• OFF: Repeat function off
TRACK: Current track repeat
ALL: All track repeat
NOTE:
Repeat Track setting will be cleared when moving to
other track.
3 Press [RETURN] to exit the menu.
REPEAT TITLE / CHAPTER
1 During playback, press
[MODE] repeatedly until
REPEAT menu appears.
2 Use [
KK
/
LL
] to select your desired repeat mode.
• OFF: Repeat function off
CHAPTER: Current chapter repeat
TITLE: Current title repeat
NOTES:
Repeat Title/Chapter is not available in some scenes.
The REPEAT setting will be cleared when moving to
other title or chapter.
3 Press [RETURN] to exit the menu.
REPEAT A-B
1 Press [MODE] repeatedly until
A-B REPEAT menu appears.
2 Press [ENTER] at your desired
starting point (A).
To cancel it, press
[CLEAR].
3 Press [ENTER] again at your
desired ending point (B).
The repeat sequence begins.
4 To exit the sequence, follow step1 and press
[ENTER] repeatedly until "OFF" appears and
press
[RETURN] to exit the menu.
NOTES:
The A-B repeat section can be set only within the cur-
rent title (for DVDs) or current track (for Audio CDs).
A-B repeat is not available with some scenes in DVD.
A-B repeat playback is not available during other
repeat playback.
_ _ _ _:_ _:_ _
1 23456789
10
AC
1 00:15:30
23456789
10
AC
OFF (REPEAT)
A-B (A-B REPEAT)
A
BB
A
A- (A-B REPEAT)
A
BB
A
OFF (REPEAT)
OFF (A-B REPEAT)
A
BB
A
<Example: CD>
T1200UA_EN.QX3 06.2.6 11:16 AM Page 27
28
EN
You can determine the playing order of tracks.
1
In the stop mode, press [MODE].
The PROGRAM screen appears.
2 Use [
KK
/
LL
] to select a track,
then press
[ENTER].
NOTES:
Up to 99 tracks can be entered.
Press
[CLEAR] to erase the
most recently entered track.
If you enter more than 8 tracks, you can change pages
of the program list with
[H / G].
•To erase all tracks in the program at once, select "ALL
CLEAR" at the bottom of the track list.
3 Repeat step 2 until you select all the tracks you
want to play in the program.
4 Press [PLAY
BB
] to play the programmed tracks.
This function shuffles the playing order of
tracks.
1 In the stop mode, press
[MODE] twice.
The RANDOM screen appears.
2 Press [PLAY
BB
] to start random playback.
NOTE:
REPEAT setting is available during random playback.
(Refer to "REPEAT TRACK" on page 27.)
3 Press [STOP
CC
] to stop random playback.
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
PROGRAMMED PLAYBACK
RANDOM PLAYBACK
You can check the information about the current disc by pressing [DISPLAY].
For DVD-Videos
1 Press [DISPLAY] during playback to show cur-
rent Chapter.
The elapsed and remaining
playing time of the current
chapter will be displayed.
2 Press [DISPLAY] again to show current Title.
The elapsed and remaining
playing time of the current title
will be displayed.
3
Press [DISPLAY] again.
The bit rate and the current
repeat setting will be displayed.
• If you are playing a dual layered disc, the layer
number will also be displayed.
(L0: Layer 0 is playing. L1: Layer 1 is playing).
4
Press [DISPLAY] again to exit.
9/49 0:00:00 -0:03:30
1/3 0:00:00 - 1:23:45
TL1
For Audio CDs
1 Press [DISPLAY] during playback to show the
current Track.
The elapsed and remaining
playing time of the current
track will be displayed.
2 Press [DISPLAY] again to show current Total
Tra ck.
The elapsed and remaining
playing time of the total track
will be displayed.
3 Press [DISPLAY] again to exit.
4/12 0:03:21 - 0:02:15
T
4/12 0:13:45 - 0:45:40
T
PROGRAM B
When in the PROGRAM
mode or RANDOM
mode.
PROGRAM
TOTAL 0:14:25
1/1
1/4
6 1:30
CD-DA
ENTER
CLEAR
PLAY
2 4:30
1 3:40 1 3:40
3 5:00
4 3:10
5 5:10
6 1:30
3 5:00
10 1:30
12 2:45
6 1:30
7 2:30
PROGRAM
TOTAL 0:00:00
1/1
1/4
1 3:40
CD-DA
ENTER
CLEAR
PLAY
2 4:30
1 3:40
3 5:00
4 3:10
5 5:10
6 1:30
7 2:30
DVD SECTION
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
5 Press [STOP
CC
] to temporarily stop the playback.
You can resume the playback by pressing
[PLAY
BB
].
Press
[STOP
CC
] twice to cancel the pro-
grammed playback.
NOTE:
REPEAT setting is available during programmed
playback. (Refer to "REPEAT TRACK" on page 27.)
O
N-SCREEN INFORMATION
T1200UA_EN.QX3 06.2.6 11:16 AM Page 28
EN
29
C
HANGING THE DVD SET UP ITEMS
ON-SCREEN INFORMATION / CHANGING THE DVD SET UP ITEMS
DVD SECTION
1 In the stop mode, press
[SET-UP] twice to display the
DVD SETUP menu.
NOTES:
Pressing [SET-UP] once will
show TV/VCR SETUP menu partly.
If the menu does not appear, press [STOP
CC
] first.
Make sure the unit is in DVD mode before setting.
2 Use [
KK
/
LL
] to select "CUSTOM", then press
[ENTER].
3 Use [
KK
/
LL
] to select the
desired item, then press
[ENTER].
Refer to the pages below for
continuation to set up each item.
• LANGUAGE setting: P29
• DISPLAY setting: P30
• AUDIO setting: P30
• PARENTAL setting: P30
• OTHERS setting: P31
SETUP CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
A
B
C
D
E
CUSTOM MENU
You can change the DVD player’s settings by pressing [SET-UP] in DVD mode.
The set up items are shown in the diagram below.
AUDIO
SUBTITLE
DISC MENU
DRC
DOWN SAMPLING
DOLBY DIGITAL
TV MODE
STILL MODE
TV MODE
DOLBY DIGITAL
ANGLE ICON
AUTO POWER OFF
PARENTAL LEVEL
PASSWORD CHANGE
LANGUAGE (p29)
DISPLAY (p30)
AUDIO (p30)
PARENTAL (p30)
OTHERS (p31)
CUSTOMQUICK INITIALIZE
Press [SET-UP] twice
LANGUAGE SETTING
4 Use [
KK
/
LL
] to select the
desired item, then press
[ENTER].
• AUDIO: Sets the audio language.
• SUBTITLE: Sets the subtitle language.
• DISC MENU: Sets the language for DVD menu.
5 Use [
KK
/
LL
] to select your desired language
from the list, then press
[ENTER].
6 Press [SET-UP] to exit the menu.
NOTES:
If your desired language is not
on the list, select "OTHER" and
enter the code of the language.
(Refer to "LANGUAGE CODE
LIST" on page 35.)
This feature may not be valid due to default setting
of the disc. In this case, press
[MODE] to select the
language. (Refer to "AUDIO MENU" on page 25.)
If you select a language that is not supported by the
disc, subtitle will be "OFF" automatically and the
default language of the disc will be selected.
•To change the language for the on-screen menus,
call up the TV/VCR SETUP menu by pressing
[SET-UP] once and set the language. (Refer to "ON-
SCREEN MENU LANGUAGE" on page 11.)
SETUP
QUICK
CUSTOM
INITIALIZE
SELECT:
K
/
L SET:ENTER
EXIT:SETUP CANCEL:RETURN
AUDIO ORIGINAL
SUBTITLE
OFF
DISC MENU
ENGLISH
SETUP LANGUAGE
A
SETUP LANGUAGE
LANGUAGE CODE
Please enter a 4-digit language code.
T1200UA_EN.QX3 06.2.6 11:16 AM Page 29
EN
30
DISPLAY SETTING
4 Use [
KK
/
LL
] to select an item,
then press
[ENTER].
• TV MODE:
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
4:3 LETTER BOX (default):
To show black bars on top and
bottom of the screen.
• 4:3 PAN & SCAN:
To show a full height picture with both sides
trimmed.
NOTE:
•You can access this setting directly by selecting
"QUICK" at step 2 on page 29.
• STILL MODE:
This function allows you to adjust picture resolution
and quality in the still mode.
•AUTO (default):
Automatically select the best
resolution setting (FRAME or FIELD) based on
the data characteristics of the pictures.
FIELD:
Select "FIELD" when the pictures are still unstable
even if "AUTO" is selected. FIELD stabilizes the
pictures, although the picture quality may become
coarse due to the limited amount of data.
FRAME:
Select "FRAME" to display relatively motionless
pictures in higher resolution. FRAME improves
the picture quality, although it may unstabilize the
pictures due to simultaneous output of two field
data.
5 Press [SET-UP] to exit the menu.
QUICK
B
TV MODE
4:3 LETTER BOX
STILL MODE AUTO
SETUP DISPLAY
AUDIO SETTING
Choose the appropriate Audio settings for your
equipment as it only affects during the playback of
DVD discs.
4 Use [
KK
/
LL
] to select an item,
then press
[ENTER] repeated-
ly until your desired setting
appears.
• DRC (Dynamic Range Control):
ON :To compress the range of soft to loud sound.
(default)
OFF : Output the original sound.
• DOWN SAMPLING:
ON : Output in 48kHz. (default)
OFF : Output the original sound.
NOTE:
When playing a disc with copyright protection, the
sound will be output at 48kHz even if the setting is
"OFF".
• DOLBY DIGITAL:
• BITSTREAM: Output a Dolby Digital signal.
(default)
• PCM: Convert the Dolby Digital to PCM.
(2 channel stereo)
NOTES:
•You can access this setting directly by selecting
"QUICK" at step 2 on page 29.
Set to "BITSTREAM" when the unit is connected to
a Dolby Digital Decoder.
5 Press [SET-UP] to exit the menu.
QUICK
C
DRC
DOWN SAMPLING
DOLBY DIGITAL
SETUP AUDIO
ON
ON
BITSTREAM
DVD SECTION
PARENTAL SETTING
This feature allows you to set the rating level of your
DVD discs. Playback will stop if the disc ratings
exceed the level you set.
PARENTAL LEVEL
4 Enter four-digit password with
the Number buttons, then
press
[ENTER].
NOTE:
Enter any 4 digits (except for 4737) to set the pass-
word for the first time, and record it for your memory.
5 Use [
KK
/
LL
] to select
"PARENTAL LEVEL", then
press
[ENTER].
D
SETUP PARENTAL
PASSWORD
Please enter a 4-digit password.
PARENTAL LEVEL ALL
PASSWORD CHANGE
SETUP PARENTAL
CHANGING THE DVD SET UP ITEMS
4:3 LETTER BOX
4:3 PAN & SCAN
SETUP DISPLAY
TV MODE
AUTO
FIELD
FRAME
SETUP DISPLAY
STILL MODE
T1200UA_EN.QX3 06.2.6 11:16 AM Page 30
OTHERS SETTING
4 Use [
KK
/
LL
] to select an item,
then press
[ENTER] repeated-
ly to set the feature "ON" or
"OFF".
• ANGLE ICON:
• ON: To show the angle icon when multiple
camera angles are available during DVD
playback. (default)
OFF: To keep angle icon from the display.
• AUTO POWER OFF:
• ON: To activate screen saver program and turn
off the unit automatically. (default)
OFF: To deactivate Auto Power Off function.
NOTE:
The screen saver program starts when there is no
input from the unit for 5 minutes in the stop mode.
After the screen saver program is activated for 15
minutes, the power is automatically turned off.
5 Press [SET-UP] to exit the menu.
6 Use [
KK
/
LL
] to select the
desired level, then press
[ENTER].
7 Press [SET-UP] to exit the menu.
CONTROL LEVELS
ALL: All parental locks are cancelled.
8 [ADULT]: DVD software of any grade
(adult/general/children) can be played back.
7 to 2: Only DVD software intended for general
use and children can be played back.
1 [KID SAFE]: Only DVD software intended for
children can be played back, with those intended
for adult and general use prohibited.
NOTE:
With some DVDs, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
PASSWORD CHANGE
4 Enter current password with
the Number buttons, then
press
[ENTER].
5 Use [
KK
/
LL
] to select
"PASSWORD CHANGE", then
press
[ENTER].
6 Enter four-digit password with
the Number buttons, then
press
[ENTER].
7 Press [SET-UP] to exit the menu.
NOTE:
If you forget the current password, enter 4737 first,
then enter your new password.
The former password will be cleared and parental
level will be set to "ALL" (default).
31
EN
CHANGING THE DVD SET UP ITEMS
DVD SECTION
This allows you to return all items of
SETUP menu (except for
PARENTAL
setting
and menu language) to their default settings.
1 In the stop mode, press [SET-UP] twice to
display the DVD SETUP menu.
2 Use [
KK
/
LL
] to select
"INITIALIZE", then press
[ENTER].
3 Use [
KK
/
LL
] to select "YES",
then press
[ENTER] twice.
To cancel the initialization,
select "NO".
4 Press [SET-UP] to exit the menu.
PARENTAL LEVEL
ALL
8 [ADULT]
7 [NC-17]
6 [R]
SETUP PARENTAL
E
SETUP OTHERS
ANGLE ICON
AUTO POWER OFF
ON
ON
SETUP
QUICK
CUSTOM
INITIALIZE
SETUP INITIALIZE
Initialize?
NO
YES
INITIALIZE
SETUP PARENTAL
PASSWORD
Enter current password.
PARENTAL LEVEL ALL
PASSWORD CHANGE
SETUP PARENTAL
SETUP PARENTAL
PASSWORD
Please enter a 4-digit password.
Don't forget the password.
Press 'ENTER' to activate password.
1
2 3 4
T1200UA_EN.QX3 06.2.6 11:16 AM Page 31
32
EN
T
ROUBLESHOOTING GUIDE
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following
guide for the possible remedy of a problem before contacting the Customer Service. Sometimes a perfor-
mance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. It
could save your time and money.
No power
No operation by remote control
Poor or no picture
Poor or no picture in playback
Poor or no sound
Cannot go into recording mode
Timer recording does not work
or results in failure
Picture or color fades in and out
when copying a videotape
SYMPTOM POSSIBLE REMEDY
PAGE
Make sure the power plug is connected to an AC outlet.
(In case of power failure) Check the breaker.
Check if the batteries are weak or inserted incorrectly.
Replace weak batteries and insert with their polarities (+/-
signs) as indicated.
Aim the remote control at the remote sensor and operate
within 23 feet (7 m) of the unit.
Remove all obstacles to clear the path of the infrared signal.
Check the infrared signal output.
Select the correct mode to operate by pressing
[SELECT].
The operable range from the unit is 10 feet (3m) within 15˚.
Check if antenna or cable is connected properly.
Check for the broken pin or wire of antenna cable.
Check for source of reception disturbance.
Press
[SELECT] to select the correct mode.
Perform channel scanning to memorize available TV channels.
Tr y another channel. If OK, then possible station problem.
Adjust picture control (COLOR/CONTRAST/BRIGHT etc.).
Check for magnetism from nearby appliances and try
degaussing.
Adjust tracking control.
Tr y video head cleaning.
The videotape may be old or worn. Replace with new one.
Adjust volume control using
[VOL.
X
/
Y
].
Tr y another channel. If OK, then possible station problem.
Check if the unit is in Still mode or Slow motion playback.
If so, press
[PLAY B] to return to normal playback.
Make sure the cassette has an erase-prevention tab. If neces-
sary, cover the hole with plastic tape.
Make sure the begin/end time is set correctly.
Make sure the power is off to activate timer recording.
Check if the unit’s clock is set to current time and date.
The program may contain copy protection signals that restricts
copying.
The timer setting overlapped with another setting has priority.
Check if the tape reached the end during recording.
Check if the power failure during recording.
You cannot copy a copyrighted videotape. You are experienc-
ing copy guard protection.
9
--
7
--
--
34
9
--
6
--
--
9
13
--
9
--
15
34
--
--
--
15
15
19
19
10
--
20
--
--
21
TV/VCR mode
General
T1200UA_EN.QX3 06.2.6 11:16 AM Page 32
33
EN
TROUBLESHOOTING GUIDE
Misspelling in captions
Text is not shown in its entirety
or a delay occurs from what is
being said
Captions scrambled with white
boxes
No captions in a program which
must contain closed caption
No captions in a pre-recorded
videotape with indicated closed
captions included
Black box in the TV screen
No picture
Disc cannot be played
No sound
No DTS audio is output
Distorted picture
Audio or subtitle language does
not match the setting
The camera angle cannot be
changed
Audio or subtitle language can-
not be changed
"Prohibited icon" appears on the
screen
CD/DVD sound dropout
No CD/DVD reproduction
DVD picture poor
SYMPTOM POSSIBLE REMEDY
PAGE
Error committed by the closed captioning production company.
Possible in a live broadcast. Not in case of a prerecorded pro-
gram.
A few seconds of delay is common for live broadcast.
If a dialogue exceeds the display capacity (220 words per
minute), selective editing is used so that the captions remain
up-to-date with the current TV screen dialogue.
Caused by interferences of building, power lines, thunder-
storms, etc.
The broadcast may use a time compression process to speed
up the program. The decoder cannot read the compressed
information and captions will be lost.
Possibility of a illegal copy or an erroneous copying process
accidentally performed by the fabricator.
You are in TEXT mode. Select CAPTION mode or "OFF".
This unit cannot play DVD-RAM/CD-i/Photo CD/Video
CD/DVD with region codes other than "1" and "ALL".
Clean the disc.
Place the disc correctly, with the label side up.
Cancel the parental setting or change the control level.
Correct the audio output settings.
Confirm the power and audio settings of external audio com-
ponent.
This unit does not support DTS audio. This is not a malfunc-
tion.
During the playback of a 2-layered disc, pictures may stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.
This happens right after fast forwarding or rewinding.
The selected language is not available for audio or subtitle on
the DVD.
The DVD does not contain sequences recorded from different
camera angles.
The DVD does not contain audio source or subtitles in the
selected language.
That operation is not available by the unit or the disc.
Scratched disc. Replace with an unscratched one.
--
--
--
--
--
--
11
22
34
23
30
30
--
--
--
--
29
25
29
23
--
TV/VCR mode DVD mode
NOTES:
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s
Manual for details on correct operations.
Playback from a desired track and random playback are not available during playback.
T1200UA_EN.QX3 06.2.6 11:16 AM Page 33
EN
DISC HANDLING
Handle the discs so that fingerprints and dust do
not adhere to the surfaces of the discs.
Always store the disc in its protective case when it
is not used.
•To clean-off, use a soft cloth.
Do not use a hard cloth since this
will mar the disc.
Wipe the disc in a straight line from center to edge.
•Never wipe with a circular motion.
Do not use detergent or abrasive clean-
ing agents.
34
M
AINTENANCE
DEGAUSSING
A degaussing circuit in this unit clears up color
errors on the TV screen. Color errors occur when
there is any excess magnetism close to the unit.
This circuit is designed to operate once when the
unit is first plugged in.
If you see minor color
errors on the screen, unplug the unit for approx-
imately 30 minutes.
When you plug the unit again,
the degaussing circuit will operate to clear errors.
Take this step any time the TV screen is accidental-
ly magnetized or when you move the unit.
AUTO HEAD CLEANING
•Automatically cleans video heads as you insert or
remove a cassette, so you can see a clearer pic-
ture.
Playback picture may become blurred or interrupt-
ed while the TV program reception is clear. Dirt
accumulated on the video heads after long peri-
ods of use or the usage of rental or worn tapes
can cause this problem.
If a streaky or snowy picture appears during play-
back, the video heads in your unit may need to be
cleaned.
1. Please visit your local Audio/Video store and pur-
chase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the prob-
lem, please call our help line mentioned on the
front page, to locate an Authorized Service
Center.
NOTES:
Remember to read the instructions included with the
video head cleaner before use.
Clean video heads only when problems occur.
IF THE LASER OPTICAL PICKUP UNIT IS
DIRTY
If the unit still does not perform properly when it is
operated, while referring to the relevant sections
and to “TROUBLESHOOTING GUIDE” in this
Owner’s Manual, the laser optical pickup unit may
be dirty. Consult your dealer or an Authorized
Service Center for inspection and cleaning of the
laser optical pickup unit.
CABINET CLEANING
Wipe the front panel and other exterior surfaces of
the unit with a soft cloth immersed in lukewarm
water and wrung dry.
•Never use a solvent or alcohol. Do not spray
insecticide liquid near the unit. Such chemicals
may cause damage and discoloration to the
exposed surfaces.
SERVICING
Should your unit become inoperative, do not try to
correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
power cord and
please call our help line men-
tioned on the front page,
to locate an Authorized
Service Center.
IR SIGNAL CHECK
Use the AM radio or the digital camera to check if
the remote control properly sends out the infrared
signal. It will help to define the cause of malfunction.
Using AM radio
•Tune the AM radio to no broadcasting band.
Press any button on remote control toward
the radio. If the radio receives the signal
from remote control properly, the sound will
flutter.
Using digital camera
(including built-in camera of cellular
phone)
Press and hold any button on remote control
toward a digital camera. The remote control is
working if you confirm infrared light through the
digital camera.
T1200UA_EN.QX3 06.2.6 11:16 AM Page 34
LANGUAGE CODE LIST
Language Code
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061
O-R
Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish [POL] 6258
Portuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467
S
Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Sindhi 6550
Singhalese 6555
Siswat 6565
Slovak 6557
Slovenian 6558
Language Code
Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568
T
Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Tu rkish [TUR] 6664
Tu rkmen 6657
Tw i 6669
U-Z
Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yo r uba 7161
Zulu 7267
35
EN
MAINTENANCE / APPENDIX
If you choose a language that has a 3 letter language
code, the code will be displayed every time you change
the AUDIO or SUBTITLE language setting. If you
choose any other languages, '---' will be displayed
instead. (3 letter language code is written in bracket.)
Language Code
A-B
Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851
C-E
Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech [CZE] 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Esperanto 5161
Estonian 5166
F-H
Faroese 5261
Fiji 5256
Finnish [FIN] 5255
French [FRE] 5264
Frisian 5271
Galician 5358
Georgian 5747
Language Code
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467
I-K
Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767
L-N
Laothian 5861
Latin 5847
Latvian;Lettish 5868
Lingala 5860
Lithuanian 5866
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
A
PPENDIX
CABLE CHANNEL DESIGNATIONS
TV Display
TV Display
TV Display
TV Display
TV Display
TV Display
TV Display
TV Display
CATV channel
TV Display
W+80 W+81 W+82 W+83 W+84
W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79
W+55 W+56 W+57 W+58 A-4 A-3 A-2 A-1 W+59 W+60 W+61 W+62 W+63 W+64
W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54
W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39
W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24
A-5
RSTUVWW+1 W+2 W+3 W+4 W+5 W+6 W+7 W+8 W+9
CDE FGH I JK LMNOPQ
5A 2 3 4 5 6 7 8 9 10 11 12 13 A B
123456789101112131415
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105
106 107 108 109 110 111 112 113 114 115 116 117 118 119 120
121 122 123 124 125
CATV channel
CATV channel
CATV channel
CATV channel
CATV channel
CATV channel
CATV channel
CATV channel
If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels
with letters or letter-number combinations. Please check with your local cable company. The following is a
chart of common cable channel designations.
T1200UA_EN.QX3 06.2.6 11:16 AM Page 35
EN
36
GENERAL SPECIFICATIONS
TV/VCR
ELECTRICAL SPECIFICATIONS
CRT: 20 inch in-line gun,
90˚ deflection tube
Television system: NTSC-M
Closed caption system: §15.119/FCC
Video Heads: Rotary four-head
Tape width: 1/2 inch
Tape speed
SP: 33.40 mm/sec.
LP: 16.67 mm/sec.
SLP: 11.12 mm/sec.
Tuner channel
TV VHF Low: #2~#6
TV VHF High: #7~#13
TV UHF: #14~#69
CATV
VHF: 5A
MID band: A5~A1, A~I
SUPER band: J~W
HYPER band: W+1~W+84
DVD
Product type: DVD Player
Discs:
DVD video, Audio CD
Output signal format: NTSC color
Sound output:
2 speakers, 1W, 8 ohm
OTHER SPECIFICATIONS
Ter minals
Antenna input: VHF/UHF/CATV
75 ohm unbalanced
(F-type)
Video input: RCA connector
× 1
Audio L/R input: RCA connector
× 2
Headphone: 1/8" stereo (3.5 mm)
Coaxial digital
audio output: One pin jack,
500 m Vpp (75 ohm)
Remote control: Digital encoded
infrared light system
Operating temperature: 5°C to 40°C
(41°F~104°F)
Power requirements: AC 120 V, 60 Hz
Power consumption 90 W
(Maximum):
Picture tube: 20"
Dimensions: H: 20-3/16" (513 mm)
W
: 22-1/8" (562 mm)
D: 19-7/8" (505 mm)
Weight: 51.1 lbs. (23.2 kg)
•Designs and specifications are subject to change without notice.
If there is a discrepancy between languages, the default language will be English.
S
PECIFICATIONS
T1200UA_EN.QX3 06.2.6 11:16 AM Page 36
CONEXIONES DE ANTENA/CABLE
ES
ÍNDICE DE CONTENIDO / PREPARATIVOS PARA EL USO
ANT.
AUDIO OUT
COAXIAL
ANT.
IN
OUT
Parte trasera de la
unidad
*NOTA
(NO DESCONECTAR DE LA CAJA)
Algunos sistemas de TV por cable utilizan
señales cifradas y requieren un convertidor
especial para recibir estos canales.
Consulte con su empresa de cable local.
O
Cable entrante desde antena
casera/empresa de cable (sin
caja de cable)
Cable entrante desde empresa de cable
o antena de satélite
Caja de cable o caja de satélite*
Enchufe el cable entrante en la toma ANT., en la parte trasera de la unidad.
Si su servicio de cable le suministra una caja convertidora o si usted utiliza un sistema de satélite, conecte
la caja con esta unidad, como se indica a continuación.
NOTA:
Antes de enchufar la antena en la
toma ANT. de la unidad, compruebe
que la patilla no está doblada. Si
está doblada, enderece la patilla
como se indica en la ilustración y
enchufe la patilla a la toma ANT. de
la unidad.
(Debe ser
enderezada)
(Patilla recta)
Patilla doblada
Cable
Enchufe
Í
NDICE DE CONTENIDO
PREPARATIVOS PARA EL USO . . . . . . . . . . . .37
CONEXIONES DE ANTENA/CABLE . . . . . . . . . . .37
CONEXIÓN A UN DISPOSITIVO EXTERNO
(FRONTAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL
(TRASERA) . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
SECCIÓN TV/VCR
FUNCIONAMIENTO Y AJUSTES DEL
TELEVISOR . . . . . . . . . . . . . . . . . . . . . . . . . .39
PARA VER UN PROGRAMA DE TELEVISIÓN . . . .39
AJUSTE DEL RELOJ . . . . . . . . . . . . . . . . . . . . . .39
AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . .40
IDIOMA DE MENÚ DE PANTALLA . . . . . . . . . . . . .40
REPRODUCCIÓN . . . . . . . . . . . . . . . . . . . . . . .41
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .41
GRABACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . .41
GRABACIÓN NORMAL . . . . . . . . . . . . . . . . . . . . .41
GRABACIÓN CON TEMPORIZADOR
AUTOMÁTICO . . . . . . . . . . . . . . . . . . . . . . . . . .42
SECCIÓN DVD
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .43
MENÚ DE DISCO/MENÚ DE TÍTULO . . . . . . . . . .43
Para su seguridad y
para evitar daños en la
unidad, desenchufe el
cable de la antena de la
toma ANT. antes de
mover la unidad.
P
REPARATIVOS PARA EL USO
Antena
Cable
Señal de TV
o
37
T1200UA_ES.QX3 06.2.6 11:18 AM Page 37
38
ES
Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice
las tomas de entrada AUDIO/VIDEO en la parte frontal de la unidad.
Conecte las tomas de salida de Audio/Vídeo de otra fuente a las tomas AUDIO L/R y
VIDEO de esta unidad.
A continuación, utilice [SELECT] o [CH.
KK
/
LL
] hasta que aparezca "AUX" en la pantalla.
VIDEO
L
AUDIO
R
HEADPHONE
VIDEO L - AUDIO - R
STOP/
EJECTF.FW DREWREC/OTRCHANNEL
TV/VCR
SELECT
DVD
OPEN/
CLOSESTOPSKIPSKIPVOLUME
POWER
PLAY
PLAY
HEADPHONE
E SEARCH D
Parte frontal de
la unidad
Cable de audio
(disponible en el mercado)
A las tomas de salida de audio
A la toma de salida de vídeo
Cable de vídeo (disponible en el mercado)
NOTA:
Cuando conecte una videograbadora monoaural (otra fuente) a esta unidad, conecte la toma de salida de audio de la
videograbadora monoaural (otra fuente) a la toma AUDIO L de esta unidad. El sonido saldrá igualmente por ambos
canales L y R (izquierdo y derecho).
AUX
(SALIDA)
(ENTRADA)
(SALIDA)
(ENTRADA)
CONEXIÓN A UN DISPOSITIVO EXTERNO (FRONTAL)
AUDIO OUT
COAXIAL
AUDIO OUT
COAXIAL
Puede conectar esta unidad a un dispositivo de audio digital para disfrutar del sonido digital de DVD.
Conecte a un amplificador equipado con tomas de entrada digital, tales como una platina MD o DAT. Para
reproducir un disco DVD en un formato ambiental multicanal Dolby Digital en esta unidad, conéctela a un
decodificador Dolby Digital.
Utilice un cable coaxial digital de audio (disponible en el mercado) para las conexiones de audio.
CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL (TRASERA)
(ENTRADA)
NOTAS:
• La fuente de audio de un disco en formato ambiental multicanal Dolby Digital no puede ser grabado como sonido digital
por una platina MD o DAT.
• Asegúrese de apagar todos los dispositivos del sistema antes de conectar otro dispositivo.
• Consulte los manuales del usuario de los dispositivos que van a conectarse a la unidad.
• Para conectar a una platina MD o DAT, ajuste "DOLBY DIGITAL" en "PCM" para la salida de audio en el modo de
ajuste, y para conectar a un decodificador Dolby Digital, ajuste en "BITSTREAM" (consulte "AUDIO SETTING" en
página 30). Utilizar una unidad con unos ajustes incorrectos puede generar distorsión de ruido y puede asimismo dañar
los altavoces.
Por ejemplo,
videograbadora o
videocámara, etc.
Decodificador
Dolby Digital
Platina MD,
platina DAT, etc.
A la toma de entrada de
audio coaxial digital
A la toma de entrada de
audio coaxial digital
A la toma AUDIO
OUT COAXIAL
(Solamente DVD
AUDIO OUT)
Cable de audio coaxial digital
(disponible en el mercado)
o
(ENTRADA)
(SALIDA)
PREPARATIVOS PARA EL USO
T1200UA_ES.QX3 06.2.6 11:18 AM Page 38
39
ES
FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR
AUX
VOLUMEN 20
C C C C C C C C C C C C C C C C
SECCIÓN TV/VCR
PARA VER UN PROGRAMA DE TELEVISIÓN
TV/VCRTV/VCR
1 Después de finalizar la conexión de la
antena o del cable, conecte el cable de
alimentación a una toma estándar de
CA.
2 Presione [POWER] para encender la unidad.
3 Utilice [CH.
K
/
L
] o los botones numéricos
para seleccionar el número de canal deseado.
4 Utilice [VOL. X / Y] para ajustar el volumen.
Presione
[MUTE] para
silenciar al instante el sonido.
Presione de nuevo para
restaurar el nivel de sonido
anterior.
NOTA:
Incluso aunque apague la unidad en el modo DVD,
la unidad estará en el modo TV/VCR cuando vuelva
a encenderse.
PARA VER UN CANAL DE CABLE O SATÉLITE
Si la unidad está conectada a una caja de cable o
de satélite, utilice
[CH. K / L] para seleccionar
CA3 o CA4 según el ajuste de canal de salida del
dispositivo y seleccionar el canal deseado en dicho
dispositivo.
PARA VER UNA ENTRADA EXTERNA
Cuando un equipo externo esté
conectado a las tomas de entrada
frontales AUDIO/VIDEO, presione
[SELECT] o [CH. K / L]
repetidamente hasta que
aparezca "AUX" en la pantalla.
NOTA:
Si no hay entrada de señal del terminal de antena ni
se hace funcionar durante 15 minutos, el TV se
apagará automáticamente.
Para utilizar los botones numéricos
Canales de un dígito: (Ej.: 02, 03, 04, etc.)
Presione primero [0] para seleccionar un canal de un
dígito.
Canales de dos dígitos: (Ej.: 12, 38, 95 ...)
Presione dos dígitos directamente.
Canales de tres dígitos: (Ej. 115, 125 ...)
Presione primero
[+100], y luego presione los últimos
dos dígitos.
- TV/VCR PREP. -
COMO PROGRAMAR
B AJUSTE RELOJ
AJUSTE DE CANAL
AJUSTE DE USER
AJUSTE DE V-CHIP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
5:40 PM
Ajuste correctamente el reloj de la
unidad para grabación con temporizador
para videograbadora. Se sugiere ajustar el reloj
manualmente cuando se configure por primera vez
la unidad, y luego fijar el ajuste automático del reloj
en "ON" para corregir la hora periódicamente.
NOTA:
Si no pude recibir una emisora con las señales
horarias, el ajuste automático del reloj no estará
disponible. Utilice únicamente el ajuste manual.
AJUSTE MANUAL DEL RELOJ
En el siguiente ejemplo, el reloj está ajustado en:
FECHA: 5 de mayo de 2006
HORA DE AJUSTE: 5:40PM
1 Presione [SET-UP].
Utilice
[
KK
/
LL
] para ir hasta
"AJUSTE RELOJ", y presione
[ENTER].
2 Utilice [
KK
/
LL
] para ir hasta
"AJUSTE MANUAL RELOJ", y
presione
[ENTER].
Si no hay ninguna emisora local
PBS en su zona o en su sistema
de cable, seleccione "RELOJ AUT." y presione
[ENTER] para desactivar la función antes de este
paso.
3 Utilice [
KK
/
LL
] para ajustar los
datos deseados de mes, día,
año, hora y minuto.
Utilice
[s / B] para pasar a
otro elemento.
4 Presione [SET-UP].
Aunque los segundos no se
muestran, se comienzan a
contar desde 00 cuando se
presiona
[SET-UP]. Utilice esta función para
sincronizar el reloj con la hora correcta.
NOTA:
Cuando desenchufe el cable de CA o si hay un corte
del suministro eléctrico durante más de 3 segundos,
es posible que tenga que reajustar el reloj.
– AJUSTE RELOJ –
RELOJ AUT. [ON]
BUSQ. AUTO RELOJ CA.
CAN. RELOJ AUT. [ 02 ]
B AJUSTE MANUAL RELOJ
HORA VER. [OFF]
SECCIÓN TV/VCR
F
UNCIONAMIENTO Y AJUSTES DEL TELEVISOR
AJUSTE DEL RELOJ
TV/VCRTV/VCR
– AJUSTE MANUAL RELOJ –
MES DIA AÑO
0 5 / 0 5 VIE 2 0 0 6
HORA MINUTO
0 5 : 4 0 PM
T1200UA_ES.QX3 06.2.6 11:18 AM Page 39
- TV/VCR PREP. -
COMO PROGRAMAR
AJUSTE RELOJ
AJUSTE DE CANAL
AJUSTE DE USER
AJUSTE DE V-CHIP
B IDIOMA [ESPAÑOL]
TÍTULO [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
Puede seleccionar el idioma del menú
de pantalla entre inglés, español y
francés.
1 Presione [SET-UP].
Utilice
[
KK
/
LL
] para ir hasta
"IDIOMA".
2 Presione [ENTER] repetidamente para
seleccionar "ENGLISH", "ESPAÑOL" o
"FRANÇAIS".
3 Presione [SET-UP] para salir del menú.
NOTAS:
Esta función afecta solamente al idioma del menú de
pantalla y no a la fuente de sonido.
Si por alguna razón el menú ya está en inglés o en
francés, presione [SET-UP] y mediante [
KK
/
LL
] vaya
a "LANGUAGE [ENGLISH]" o "LANGAGE
[FRANÇAIS]", y presione [ENTER] repetidamente
para seleccionar el idioma deseado, y presione
[SET-UP].
CA 15
<EJEMPLO>
- TV/VCR PREP. -
COMO PROGRAMAR
AJUSTE RELOJ
B AJUSTE DE CANAL
AJUSTE DE USER
AJUSTE DE V-CHIP
IDIOMA [ESPAÑOL]
TÍTULO [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR
NO HAY SEÑAL DE TV
– AJUSTE DE CANAL –
AGREGAR / BORRAR (CATV)
B
AUTOPROGRAMACIÓN DE CA.
AJUSTE DE CANAL
TV/VCRTV/VCR
40
ES
IDIOMA DE MENÚ DE PANTALLA
TV/VCRTV/VCR
SECCIÓN TV/VCR
Es necesario preseleccionar el canal al
principio o en caso de haber movido el
televisor a una zona distinta.
AUTOPROGRAMACIÓN DEL CANAL
1 Presione [SET-UP].
Utilice
[
KK
/
LL
] para ir hasta
"AJUSTE DE CANAL", y
presione
[ENTER].
2 Utilice [
KK
/
LL
] para ir hasta
"AUTOPROGRAMACIÓN DE
CA.", y presione
[ENTER].
El sintonizador explora y memoriza todos los
canales activos de su zona.
3 Cuando la exploración ha
finalizado, se muestra el canal
memorizado más bajo.
Si en la pantalla del televisor
aparece "NO HAY SEÑAL DE
TV", compruebe la conexión
de la antena y vuelva a
intentar.
NOTAS:
La unidad puede reconocer canales de CATV como
canales de TV si el estado de la recepción es
deficiente. En tal caso, compruebe la conexión de la
antena y vuelva a intentar "AUTOPROGRAMACIÓN
DE CA.".
La autoprogramación del canal NO es necesaria
cuando está conectado a una caja de cable o de
satélite. Simplemente seleccione el canal para
entrada de caja de cable o de satélite (ej. CA3 o
CA4) en la unidad, y seleccione el canal deseado
en la caja de cable o de satélite.
T1200UA_ES.QX3 06.2.6 11:18 AM Page 40
SP
GRABACIÓN NORMAL
TV/VCRTV/VCR
1 Utilice [CH.
KK
/
LL
] o los
botones numéricos
para
seleccionar el canal donde se
va a grabar.
NOTA:
Si la unidad está conectada a una caja de cable o
de satélite, deberá estar en CA3 o CA4. Seleccione
en la caja de cable o de satélite el canal donde se
va a grabar.
2 Presione [SPEED] para
seleccionar la velocidad de
cinta deseada (SP/SLP).
(Consulte "SELECTING TAPE
SPEEDS" en página 15.)
3 Presione [REC] para iniciar la
grabación.
4 Presione [PAUSE
FF
] para
interrumpir temporalmente la
grabación de escenas no
deseadas.
Presione
[PAUSE
FF
] de
nuevo o
[REC] para reanudar
la grabación.
NOTA:
Si la grabación se mantiene en pausa durante más
de 5 minutos, la unidad pasará automáticamente al
modo de grabación para que la cinta no sufra daños.
5 Presione [STOP
CC
] para interrumpir la
grabación.
PARAR
REBOBINAR
E
AV RAPIDO
D
EXPULSAR
A
41
ES
REPRODUCCIÓN / GRABACIÓN
NOTAS:
Inserte una cinta de casete con la lengüeta de
protección contra borrado sin quitar.
Esta unidad no puede grabar el contenido del DVD
incorporado.
SOLAMENTE podrá ver el mismo programa de
televisión que se esté grabando.
CA 10
GRABAR
SP
PAUSA
SP
SECCIÓN TV/VCR
REPRODUCIR
B
REPRODUCCIÓN BÁSICA
TV/VCRTV/VCR
1 Inserte una cinta pregrabada para
encender la unidad
automáticamente (Auto Power
On/Actividad automática).
2 Seleccione el modo TV/VCR presionando
[SELECT].
NOTA:
Si se ha quitado la lengüeta de protección contra
borrado, la unidad cambiará en el modo VCR y
empezará la reproducción automáticamente.
3 Para iniciar la reproducción,
presione
[PLAY
BB
].
NOTA:
Incluso en el modo DVD, puede iniciar la reproducción
en videograbadora si presiona [PLAY
BB
] en el panel
frontal (del lateral de TV/VCR).
4
Para interrumpir la reproducción,
presione
[STOP
CC
].
5
Para rebobinar la cinta, presione
[REV
E
].
Para hacer avanzar la cinta,
presione
[FWD
D
].
Para interrumpir el movimiento de
la cinta, presione
[STOP
CC
].
6
Para expulsar la cinta de la unidad,
presione
[STOP/EJECT
C A
] en el
panel frontal.
AJUSTE DE SEGUIMIENTO
El ajuste de seguimiento se establecerá automáticamente
al iniciar la reproducción (función de seguimiento digital).
Si aparecen líneas de ruido (rayas negras y blancas) en la
imagen de reproducción, utilice
[CH.
KK
/
LL
] hasta que las rayas
desaparezcan (ajuste de seguimiento manual). Esto también
está disponible en el modo Pausa/Imagen fija/Cámara lenta.
Para desactivar el modo de seguimiento manual, pare
la cinta una vez e inicie de nuevo la reproducción.
IMAGEN FIJA
Durante la reproducción, presione [PAUSE F]
para congelar la imagen.
Puede avanzar la imagen fotograma a fotograma
presionando repetidamente
[PAUSE F].
Para desactivar el modo de imagen fija, presione [PLAY
BB
].
CÁMARA LENTA
Durante la reproducción, presione [PAUSE F] y, a
continuación presione
[FWDD].
Para desactivar el modo de cámara lenta, presione [PLAY
BB
].
NOTA:
Si la unidad se mantiene en el modo cámara lenta o imagen fija durante
más de 5 minutos, entrará automáticamente en el modo de parada.
R
EPRODUCCIÓN
G
RABACIÓN
T1200UA_ES.QX3 06.2.6 11:18 AM Page 41
PRG. ESTAR LISTO
– COMO PROGRAMAR –
CA FECHA INICIO FINAL
B
61 7/03 LUN 7:30
P
M
8:50
P
M
- -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– COMO PROGRAMAR –
CA FECHA INICIO FINAL
B
61 7/03 LUN 7:30
P
M
8:50
P
M
SP
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
5
Utilice [
KK
/
LL
] para ajustar la hora
y el minuto de inicio/fin deseados.
Presione
[
BB
] para pasar al
siguiente elemento.
6
Utilice [
KK
/
LL
] hasta que aparezca la
velocidad de cinta deseada.
(Consulte "SELECTING TAPE SPEEDS"
en página 15.)
7 Presione [ENTER] para finalizar el ajuste.
Para ajustar otro programa, repita los pasos 2 a 7.
•Para corregir el programa durante el ajuste,
presione
[
ss
] para retroceder un paso y utilice
[
KK
/
LL
] para introducir los números correctos.
Presione
[SET-UP] para salir del menú.
8 Presione [POWER] para ajustar la grabación
con temporizador automático.
El indicador de grabación se enciende.
NOTAS:
DEBE apagar la unidad para activar la grabación
con temporizador automático.
Si no se apaga la unidad y sigue
usted viendo la televisión, "PRG.
ESTAR LISTO" empieza a parpadear
en la pantalla del televisor 2 minutos
antes de la hora de inicio programada.
Asegúrese de insertar una cinta con lengüeta de
protección contra borrado antes de apagar la unidad.
Si la cinta no tiene la lengüeta, será expulsada
cuando se presione [POWER] para apagar.
9 En la hora de inicio programada, la unidad
empieza a grabar.
NOTAS:
La grabación comienza sin encenderse la pantalla
del televisor.
Durante la grabación, puede ver solamente el
programa de televisión que se esté grabando
actualmente o una reproducción de DVD.
Presione
[POWER] y [SELECT] para seleccionar el
modo deseado.
Si la cinta se acaba antes de la hora de finalización, la grabación
se interrumpe inmediatamente y la cinta es expulsada.
PARA CONFIRMAR EL PROGRAMA
1 Presione [POWER] para encender la unidad.
(El indicador de grabación se apaga.)
2 Presione [SET-UP].
Utilice
[
KK
/
LL
] para seleccionar "CÓMO
PROGRAMAR", y presione
[ENTER].
3 Confirme los detalles de los programas que
aparecen en la pantalla del televisor.
4 Presione [SET-UP] para salir del menú.
- TV/VCR PREP. -
B COMO PROGRAMAR
AJUSTE RELOJ
AJUSTE DE CANAL
AJUSTE DE USER
AJUSTE DE V-CHIP
IDIOMA [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– COMO PROGRAMAR –
CA FECHA INICIO FINAL
B
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– COMO PROGRAMAR –
CA FECHA INICIO FINAL
B
61 -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– COMO PROGRAMAR –
CA FECHA INICIO FINAL
B
61 CADA LUN -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– COMO PROGRAMAR –
CA FECHA INICIO FINAL
B
61 7/03 LUN -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– COMO PROGRAMAR –
CA FECHA INICIO FINAL
B
61 CADA DIA -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
Puede ajustar ocho programas para grabar en
días concretos, diariamente o semanalmente,
dentro de un periodo de un año.
En el siguiente ejemplo, el temporizador está
ajustado para grabar:
FECHA: 3 de julio de 2006
HORA DE AJUSTE: de7:30PM a 8:50PM
CANAL: CA61
VELOCIDAD DE CINTA: SP
1 Presione [SET-UP].
Utilice
[
KK
/
LL
] para seleccionar
"CÓMO PROGRAMAR", y
presione
[ENTER].
NOTA:
Si todavía no ha ajustado el reloj, aparece el menú
"AJUSTE MANUAL RELOJ". Ajuste la hora y la
fecha actuales (consulte "AJUSTE MANUAL DEL
RELOJ" en página 39) e inicie el ajuste de la
grabación con temporizador.
2 Utilice [
KK
/
LL
] para seleccionar
la posición del programa
deseado y presione
[
BB
].
3 Utilice [
KK
/
LL
] hasta que
aparezca el número del canal
deseado y presione
[
BB
].
NOTA:
Si la unidad está conectada a una caja de cable o de
satélite, deberá estar en CA3 o CA4. Seleccione en la
caja de cable o de satélite el canal donde se va a grabar.
4 Ajuste la fecha de inicio.
Para una única grabación :
Presione [
KK
] hasta que
aparezca la fecha deseada. A
continuación, presione
[
BB
].
Para una grabación cada día
:
Para grabar el mismo canal a la
misma hora cada día.
Presione [
LL
] hasta que
aparezca "CADA DÍA", y
presione
[
BB
].
Para una grabación semanal
:
Para grabar el mismo canal a la
misma hora cada semana.
Presione [
LL
] hasta que aparezca "CADA" y su
día deseado de la semana (por ejemplo, "Cada
lunes"), y presione
[
BB
].
GRABACIÓN CON TEMPORIZADOR AUTOMÁTICO
TV/VCRTV/VCR
42
ES
T1200UA_ES.QX3 06.2.6 11:18 AM Page 42
43
ES
SECCIÓN DVD
1 Presione [POWER] para
encender la unidad.
2 Presione [OPEN/CLOSE
AA
] en la unidad.
3 Coloque el disco en la
bandeja, con la etiqueta hacia
arriba.
4 Presione [PLAY
BB
].
• La bandeja se cerrará automáticamente y se
empezará la reproducción. Cuando reproduzca un
DVD que incluya un menú de títulos, este menú
puede aparecer en pantalla.
NOTAS:
Cerrar la bandeja del disco manualmente o
presionando [OPEN/CLOSE
AA
] también inicia la
reproducción.
Con discos DVD que utilicen títulos para señales de
programa de reproducción, la reproducción puede
comenzar desde el segundo título o puede omitir
dichos títulos.
5 Para congelar la imagen, presione [PAUSE
FF
]
durante la reproducción.
NOTA:
El sonido se silenciará en modo de pausa.
6 Presione [STOP
CC
] para
interrumpir temporalmente la
reproducción.
• Presione
[PLAY
BB
] para
reanudar la reproducción.
• Para cancelar la reanudación y
parar el disco, presione
[STOP
CC
] de nuevo.
NOTAS:
La información de reanudación se conserva aunque
se apague la unidad.
Puede aparecer un "icono
prohibido" en la zona superior
derecha de la pantalla del
televisor durante la operación. Esto significa que la
operación no está disponible en el disco.
REPRODUCCIÓN PASO A PASO
Durante la reproducción, presione
[PAUSE F].
Puede avanzar la imagen fotograma a fotograma
presionando repetidamente
[PAUSE F].
•Para volver a la reproducción normal, presione
[PLAY
BB
].
REPRODUCCIÓN BÁSICA
Un DVD puede contener menús para explorar
el disco y acceder a funciones especiales.
1 Presione [DISC MENU] o [TITLE].
Aparecerá el menú principal/menú de título del DVD.
Puede activar el menú incluso durante la reproducción.
2 Utilice [
KK
/
LL
/
ss
/
BB
] para seleccionar un
elemento y presione
[ENTER].
NOTAS:
SI el disco tiene un menú de disco, aparecerán
distintas opciones de selección: idioma de sonido,
subtítulos, capítulos del título y otras.
El contenido del menú y las correspondientes
operaciones de menú pueden variar según los
discos. Para más detalles, consulte el manual que
acompaña el disco.
MENÚ DE DISCO/MENÚ DE TÍTULO
Presione 'PLAY' para reproducir
desde aquí.
Para reproducir desde el inicio,
primero presione 'STOP' y luego
'PLAY'.
REANUDACIÓN ACTIVADA
AVANCE RÁPIDO / RETROCESO RÁPIDO
Durante la reproducción, mantenga
presionado
[FWD
DD
] para avance
rápido o
[REV
EE
] para retroceso rápido.
Cada vez que mantenga
presionado el botón, la
reproducción se acelera y el
nivel de velocidad aparece en la pantalla.
NOTAS:
En los discos DVD, la velocidad de avance/retroceso
rápido es diferente según el disco. La velocidad
aproximada es 1 (×2), 2 (×8), 3 (×20), 4 (×50) y 5 (×100).
En discos de CD de audio la velocidad aproximada
es 1 (×2), 2 (×8) y 3 (×30).
Cuando utilice los botones del panel frontal, utilice
[SEARCH
EE
/
DD
].
Para volver a la reproducción normal, presione [PLAY
BB
].
AVANCE LENTO / RETROCESO LENTO
Durante la reproducción, presione [PAUSE
FF
].
Mantenga presionado [FWD
DD
] para
avance lento o
[REV
EE
] para retroceso lento.
Cada vez que mantenga
presionado el botón, la
reproducción se ralentiza y el
nivel de velocidad aparece en la pantalla.
NOTAS:
La velocidad de avance/retroceso lento varía según
el disco. La velocidad aproximada es 1 (1/16), 2
(1/8) y 3 (1/2).
Cuando utilice los botones de la unidad principal,
utilice [SEARCH
EE
/
DD
].
•Para volver a la reproducción normal, presione
[PLAY
BB
].
D1
1
SECCIÓN DVD
T1200UA_ES.QX3 06.2.6 11:18 AM Page 43
Printed in Malaysia 1EMN21452
T1200UA
★★★★★
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or work-
manship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year
from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are
excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the
date of original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER
WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized service center. This limited warranty does not
apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal
use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alter-
ations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse,
mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as
hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of
God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR
ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED
BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE
PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SER-
VICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHO-
RIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT
FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITH-
OUT PRIOR NOTICE.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,
please contact us at:
FUNAI CORPORATION
Customer Service
Tel :1-800-968-3429
http://www.SylvaniaConsumerElectronics.com
19900 Van Ness Avenue, Torrance, CA 90501
T1200UA_EN.QX3 06.2.6 11:16 AM Page 37
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Sylvania 6720FDG Manual de usuario

Categoría
Reproductores de casete
Tipo
Manual de usuario
Este manual también es adecuado para

En otros idiomas