Yamaha VCD-120K Manual de usuario

Categoría
Reproductores de CD
Tipo
Manual de usuario

Este manual también es adecuado para

OWNER’S MANUAL
VCD-120K
NATURAL SOUND VIDEO CD CHANGER
ECHO
POWER
MPX
KARAOKE
KEY CONTROL DISC SKIP
SKIP
/
SEARCH
PREV NEXT
+10
12
34
56
7
89
0
LEVEL
KEY CONTROL
MIC 1 MIC 2
NATURAL SOUND VIDEO CD CHANGER
VIDEO CD
OPEN
/
CLOSE
STOP
/
RETURN
PLAY
/
SELECT
PLAYXCHANGE
MIN MAX MIN MAX
R
GRAPHICS
2
FEATURES
CONTENTS
5-Disc Carousel Auto-Changer (for
Playing Video CDs and Compact Discs)
Full Opening Disc Tray for Changing 5
Discs at a Time
PLAYXCHANGE; Disc Changing
Capability while Playing Another
Random Access Programmable Play
Single Track/Full Disc Repeat Play
Playback Control Function Available for
Video CDs, Version 2.0
Automatic Pause Inserting Function for
Karaoke (Karaoke Mode)
Quick Overview of a Track and a Disc with
a Touch of the DIGEST and INTRO
Buttons
Audio Output Mode Selector (MPX)
Button for Karaoke
13 Step
Key Level Control Buttons
Mic Level and Echo Level Controls
Video Output Format Selector (VIDEO
OUT MODE SELECT) Switch
Two MIC Jacks and a Mini-Jack for
Connecting with a Key Control Function
of a Microphone
On Screen Display Function (Displays
This Unit’s Operation Status on the TV
Monitor)
Remote Control Capability
Caution ............................................................3
Connections ....................................................4
Controls and Their Functions ..........................6
Basic Operations .............................................9
Pre-Programming Selections (for Singing
Karaoke) ........................................................15
Playback Control of Video CD (Ver. 2.0)
......................................................................18
Notes about the Remote Control Transmitter
......................................................................21
Handling Compact Discs ...............................21
Troubleshooting .............................................22
Specifications ................................................22
Thank you for selecting this YAMAHA Video CD changer.
This unit can play discs of the following types only.
Never attempt to load a disc other than above into the unit because it may cause a damage to this unit and/or other units
connected to this unit.
VIDEO CD
Video CDs are classified into two types, version 1.1 and 2.0. This unit can play not only discs of version 1.1, but also version
2.0 on which a Playback Control can be made.
Video CD, version 1.1: With the same operation as compact discs, you can enjoy sounds and pictures (movies).
Video CD, version 2.0: In addition to a normal play which is the same as discs of version 1.1, you can make a Playback
Control. (For details on Playback Control, refer to page 18.)
Type of disc
Video CD
CD
(including CD-G)
Mark printed
on the disc
Type of signal
recorded
Sound
+
Picture (Movie)
Sound
Sound
only
+
Still picture
Size (Dimension)
12 cm
8 cm (Single type)
12 cm
8 cm (Single type)
Maximum possible
play time
74 minutes
20 minutes
74 minutes
20 minutes
GRAPHICS
English
1 To ensure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers,
motors). To prevent fire or electrical shock, do not expose
to rain or water.
3 Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4 Never open the cabinet. If a foreign object drops into the
unit, contact your dealer.
5 This player should not be placed on appliances, such as
amplifiers, that produce heat, or placed in a cabinet that
impedes the flow or air. This may result in a failure in this
player. Install the player in a well ventilated place. In
addition, do not place objects on the player.
6 Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
7 Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
8 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit
is faulty.
9 To prevent lightning damage, unplug the power cord and
remove the antenna cable during electrical storms.
10 The generated digital signals may interfere with other
equipment such as tuners or receivers. Move the system
farther away from such equipment if interference is
observed.
11 Voltage selector (General model only)
The voltage selector (on the rear panel of this unit)
must be correctly set to the voltage used locally
before making any connection to the AC power
supply.
This unit is designed for home use only. Do not use this
unit for business purposes.
NOTE:
Please check the copyright laws in your country before
recording from records, compact discs, radio, etc.
Recording of copyrighted material may infringe copyright
laws.
WARNING
To reduce the risk of fire or electric shock, do not expose this
unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
DANGER
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
This compact disc player is
classified as a CLASS 1 LASER
product.
The CLASS 1 LASER
PRODUCT label is located on
the rear exterior. (China and
Singapore models)
Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
CAUTION
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
Laser Diode Properties
• Material: GaAlAs
• Wavelength: 780nm
• Emission Duration: continuous
• Laser Output: max. 44.6µW*
* This output is the value measured at a distance of about
200mm from the objective lens surface on the Optical Pick-
up Block.
CAUTION FOR CARRYING THIS UNIT
Be sure not to carry or tip the unit with discs remaining in it.
CAUTION FOR MOVING THIS UNIT
When moving this unit, first remove all discs from the disc
tray and close the tray by pressing the OPEN/CLOSE
button, and then switch off the power after you confirm that
the display indicates as follows.
Never switch off the power if the display is not pictured as
above, otherwise the unit will break down during moving
because the internal mechanism is not locked.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
MUSICDISC
CLASS 1 LASER PRODUCT
3
VIDEO OUT
MODE
SELECT
AUTO
NTSCPAL
L
R
LINE OUT
VOLTAGE SELECTOR
VIDEO IN
CD
240V
110V
120V
220V
4
CONNECTIONS
Before making any connections, switch OFF the power to
this unit, the amplifier, the video monitor, etc.
Connections should be made to the correct input terminals
of the amplifier, the video monitor, etc.
If the placement of this unit causes interference to other
equipment, separate them from each other.
To AC outlet
This unit
(General model)
Amplifier
Video connection cord (included)
Connecting to the amplifier
Connect the LINE OUT terminals to the audio input terminals of
the amplifier (marked as “CD”, “AUX”, etc.) by using the
included audio connection cord.
Be sure that the left (“L”) and right (“R”) LINE OUT terminals
are connected to the corresponding (left and right) terminals of
the amplifier.
Connecting to the video monitor
Connect this unit’s VIDEO OUT terminal to the video input
terminal of the video monitor by using the included video
connection cord.
Audio connection
cord (included)
Video monitor
One or two microphones can be connected to this unit.
Moreover, if you have a Yamaha microphone which has a key
control function, connect the mini-plug connector cable of the
microphone to the KEY CONTROL jack of this unit. This
connection allows you to change key of source sound by using
controls on the microphone.
5
English
Microphone
Microphone
(with a key
control function)
This unit is designed for use with the NTSC and PAL television
formats. Set this switch to the position for the format your video
monitor employs.
PAL: Outputs signals in the PAL format no matter which
format (PAL or NTSC) the currently playing disc
employs.
Set to this position if your video monitor employs the
PAL format.
AUTO: Outputs signals in the same format as the currently
playing disc employs.
Set to this position if your video monitor can be
switched in between the PAL and NTSC formats
automatically.
NTSC: Outputs signals in the NTSC format no matter which
format (PAL or NTSC) the currently playing disc
employs.
Set to this position if your video monitor employs the
NTSC format.
Connecting microphones for singing Karaoke
Setting the VIDEO OUT MODE SELECT switch
ECHO
DISC SKIP
SKIP
/
SEARCH
PREV NEXT
6
7
89
0
LEVEL
KEY CONTROL
MIC 1 MIC 2
OPEN
/
CLOSE
STOP
/
RETURN
PLAY
/
SELECT
PLAYXCHANGE
MIN MAX MIN MAX
MODE
SELECT
AUTO
NTSCPAL
VIDEO OUT
1 Disc tray
Up to 5 discs can be loaded on the disc tray. Five disc-setting
positions on the disc tray are numbered from 1 to 5.
2 MPX button
Whenever this button is pressed, audio output mode changes.
The currently selected audio output mode is shown on the
display. (Refer to page 14 for details.)
3 KARAOKE button
When this button is pressed so that “KARAOKE” lights up on
the display, a pause is inserted each time a play of track ends.
Pressing this button once more will cancel this function.
4 KEY CONTROL buttons
These buttons are available when the Karaoke mode is
selected or a microphone is connected to this unit. Pressing
these buttons changes key of the track currently playing. The
current key level is shown on the display.
: Whenever pressed, key of the track becomes lower.
: Pressing this button restores the original key level of the
track.
: Whenever pressed, key of the track becomes higher.
5 DISC SKIP button(s)
Whenever this button is pressed, the disc tray rotates and the
selected disc changes. Pressing the side rotates the disc
tray clockwise and pressing the side rotates the disc tray
counterclockwise.
6
CONTROLS AND THEIR FUNCTIONS
FRONT PANEL
REMOTE CONTROL TRANSMITTER
ECHO
POWER
MPX
KARAOKE
KEY CONTROL DISC SKIP
SKIP
/
SEARCH
PREV NEXT
+10
12
34
56
7
89
0
LEVEL
KEY CONTROL
MIC 1 MIC 2
NATURAL SOUND VIDEO CD CHANGER
VIDEO CD
OPEN
/
CLOSE
STOP
/
RETURN
PLAY
/
SELECT
PLAYXCHANGE
MIN MAX MIN MAX
1 23 5 6 87 9 04
A E F HB C GD
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
2
S
7
9
R
8
5
D
4
3
I
J
L
Q
M
K
N
O
P
6
7
English
6 SKIP/SEARCH (PREV and NEXT) buttons
SKIP: Pressing this button locates the beginning of the next
track (or the currently playing track or the previous
track).
SEARCH:
Pressing and holding this button advances (or
reverses) the play rapidly.
PREV and NEXT:
Functions only when a Playback Control operation is
made on a Video CD, version 2.0. Pressing the NEXT
side selects the next display mode, and pressing the
PREV side restores the previous display mode.
* For some discs, this key operation will not function.
7 STOP/RETURN button
Stops playing a disc during a normal disc play. During a
Playback Control operation, press this button to return to a
previous screen menu mode.
When playing a Video CD, pressing this button for 2 seconds
or more calls a Playback Control mode.
8 PLAY/SELECT (PLAY/REPEAT) button
Pressing this button starts playing a Video CD, version 1.1 and
CD. If this button is pressed while playing a disc, play will
restart from the beginning of the track currently playing.
When this unit is in a Playback Control mode for Video CDs,
version 2.0, pressing this button selects a screen menu mode.
9 OPEN/CLOSE button
Opens and closes the disc tray.
0 PLAYXCHANGE button
Press this button to open and close the disc tray while playing
a disc. This is useful when you want to exchange discs while
playing another disc.
A POWER switch
Press this switch to switch the power on. Press it again to
switch the power off.
B Remote control sensor
Receives signals from the remote control transmitter.
C Display panel
See page 8.
D Numeric buttons
Used to select a track number.
E ECHO control
This control adjusts the level of echo applied to sound signals
input from the microphone(s) connected to this unit’s MIC
jacks.
F LEVEL control
This control adjusts the level of sound signals input from the
microphone(s) connected to this unit’s MIC jacks.
G MIC (1 and 2) jacks
One or two microphones can be connected to these jacks.
H KEY CONTROL jack
If you have a Yamaha microphone which has a key control
function, connect the mini-plug connector cable of the
microphone to this jack. This connection allows you to change
key of source sound by using controls on the microphone.
I PROG button
This button is available only when “KARAOKE” is illuminated
on the display. This button is used for programming tracks.
(Refer to page 15 for details.)
J CANCEL button
Used to cancel a programmed track. (Refer to page 16–17 for
details.)
K ENTER button
Used for programming tracks. (Refer to page 15 for details.)
L DIGEST button
Press this button to watch up to nine scenes of a track on a
Video CD. It gives you a quick overview of the track.
M INTRO button
Press this button to watch the beginning of all tracks on a
Video CD. It gives you a quick overview of what’s on the disc,
so that you can easily search for your favorites.
N TIME INDEX buttons
When you press these buttons during playback, you can skip
through tracks to locate your desired position. Pressing the
button once moves the location forward or backward. Pressing
it several times allows you to move by the displayed time.
(Refer to page 12 for details.)
O INDEX buttons
If the selected disc has index numbers, by pressing the or
button once or more, you can select a desired index
number and play the disc from that point.
P SLOW button
Plays a Video CD slowly. Press the PLAY button to return to
normal-speed playback.
Q PAUSE button
Suspends playback temporarily. Press the PLAY button to
return to normal-speed playback.
Pressing the PAUSE button during pause plays frames one by
one: this function is available only for Video CDs.
R ON SCREEN button
Press this button to turn on and off the status screen on the
video monitor. It gives you information about the current
operation status of this unit.
S S/F REP button
Whenever you press this button, repeat play mode changes.
The selected mode indication appears on the display for single-
track or full-disc repeat. It also allows you to turn off the mode.
8
DISPLAY PANEL
1 VIDEO CD indicator
Lights up when the selected disc is a Video CD.
2 KARAOKE indicator
Lights up when the KARAOKE function is turned on by
pressing the KARAOKE button, and goes off if the KARAOKE
button is pressed once more.
3 PROG indicator
Lights up when this unit is in the program play mode.
4 Disc number indicator (DISC)
Shows the disc number of selected disc.
5 Track number indicator (MUSIC)
Shows the selected track number.
6 Audio output mode indicators
The current audio output mode selected by pressing the MPX
button is shown by these indicators. (Refer to page 14 for
details.)
7 Time display
Shows elapsed time of the track currently playing, program
number and so on.
8 PBC (Playback Control) indicator
Lights up when this unit is in a Playback Control mode for
playing a Video CD, version 2.0.
9 Video signal output mode indicators
Show the current position of the VIDEO OUT MODE SELECT
switch on the rear panel and the format of video output signal.
0 Key level indicator
Shows the key level of the source currently playing in 13 steps.
: Lights up when the current key level is lower than the
original level of the track.
: Lights up when the current key level is the original level
of the track.
: Lights up when the current key level is higher than the
original level of the track.
MUSIC L R VCDISC
KARAOKE
VIDEO CD
PBC PROG
AUTO
NTSC PAL
12345 6 7
098
9
English
1 Turn the power on.
2 Open the disc tray and load discs.
3 Close the disc tray.
4 Start a disc play.
Play will begin from the first track of Disc 1 automatically.
* If you want to play a desired track on another disc, see
the next page.
Note
Additionally, you can close the disc tray by the following ways.
If the tray is closed by these ways, play will begin
automatically.
Press the PLAY/SELECT button. (Play will begin from the
first track of Disc 1.)
Press a numeric button.
Press the front edge of the disc tray gently. (Play will begin
from the first track of Disc 1.)
POWER
OPEN/CLOSE
OPEN/CLOSE
Label side
upward.
Disc tray
This unit stops at the beginning of the first track on the disc.
Notes
If the STOP/RETURN button is not pressed (except when
“KARAOKE” is illuminated on the display), play will not stop
until the last track on the last-numbered disc has been
played.
When you press the STOP button during Video CD
playback except in the Playback Control and Karaoke
modes, the unit stops five seconds before the playback
ends and displays the time. The unit is in the resume play
mode.
Pressing the PLAY button in the resume play mode starts
playing from the last playback position.
Pressing the STOP button again when the unit is in the
resume play mode cancels the resume play mode.
RETURN
STOP
BASIC OPERATIONS
This manual mainly describes how to operate this unit by using the remote control transmitter. To operate this unit from
the front panel, use the same named buttons on the front panel.
Loading discs and starting disc play
SELECT
PLAY/REPEAT
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
1
2, 3
4
STOP/
RETURN
To stop play
For information about the Playback Control operation for Video CDs, version 2.0, refer to pages 18–20.
1 If necessary, select a desired disc.
* If you want to play from the first track on the disc, press
the PLAY/REPEAT button.
2 Select a desired track number.
Selecting a track (by using the numeric
buttons)
For example:
To select track 5
Press “5”.
To select track 12
Press “+10”, then press “2”.
To select track 26
Press “+10” twice, then press “6”.
Note
If a track number higher than the highest track number on the
disc is selected, the last track on the disc will be played.
KARAOKE
MPX
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIPINTRODIGEST
10
Display information
Shows the tray number of the selected disc.
Shows the selected track number.
Shows the elapsed time of the selected track.
Note
If a Video CD, version 2.0 is selected, “PBC” lights up on the
display. In this mode, disc play is controlled by the rule of
Playback Control. (If, however, you select a disc and a track
number continuously as explained above, “PBC” does not light
up automatically.) For details of Playback Control, refer to
pages 18–20.
To cancel this mode and restore the normal play mode, press
and hold the STOP/RETURN button for more than 2 seconds.
“PBC” disappears from the display.
To call the Playback Control mode again, press and hold the
STOP/RETURN button for more than 2 seconds.
It is possible to change between the modes only when the unit
stops.
MUSICDISC
VIDEO CD
AUTO
NTSC PAL
To play a desired track
DISC SKIP
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
12345
67890
+10
2
1
STOP/
RETURN
11
English
To advance rapidly
To reverse rapidly
The sound can be heard (although slightly garbled) during
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
Manual search can also be performed while disc play is
paused, though no sound will be heard.
When using the SKIP/SEARCH button on the front panel:
Be careful not to release the button just after it is pressed,
otherwise the play is skipped to the beginning of the next
track or returned to the beginning of the current track.
SEARCH
SEARCH
(press and hold)
To replay from the beginning of the
track currently playing
To play from the beginning of the track following the one
currently playing
To play from the beginning of the track currently playing
To play from the beginning of the track before the one
currently playing
(twice)
Notes
These operations can also be performed when the unit is in
the pause or stop mode.
When using the SKIP buttons on the remote control
transmitter:
If a button is pressed and held, the track number is
continuously changed to higher numbers (or lower
numbers).
When using the SKIP/SEARCH button on the front panel:
Be careful not to press and hold the button, otherwise the
selected track is played forward (or backward) rapidly.
To skip to the beginning of a desired
track
SKIP
PREV NEXT
SKIP
PREV NEXT
SKIP
PREV NEXT
To advance or reverse play rapidly
(Manual search)
(press and hold)
SELECT
PLAY/REPEAT
To suspend playback temporarily
Notes
Pressing the PAUSE button during pause plays frames one
by one. This function is available only for Video CDs.
To resume playback, press the PLAY button.
When a Video CD is played, you can make fine adjustments
to the paused position pressing the PAUSE button several
times. You can also switch to slow playback with the SLOW
button.
If playback pauses for 10 minutes, the operation stops
automatically to protect the internal mechanism.
PAUSE
Pressing the S/F REP button allows you to play any desired
track or disc repeatedly.
Whenever you press the button, the repeat play mode
indication appears on the display as follows:
Display indication Repeat play mode
Single repeat mode for playing a
track repeatedly
Full repeat mode for playing all
tracks on a disc repeatedly
Off (no repeat)
Notes
The single repeat mode overrides the program play mode.
Programmed playback cannot resume until this repeat mode
is turned off.
These repeat modes can work when playing all types of
CDs, Video CDs, version 1.1 and Video CDs, version 2.0.
However, they cannot work when playing Video CDs,
version 2.0 in the Playback Control mode.
12
To get a quick overview of a track
or a disc (for Video CDs only)
To watch scenes of a track on a Video CD
To watch the beginning of all tracks on a Video
CD
You can watch up to nine screens at a time on the video
monitor.
Notes
This button can work only for playing a Video CD.
These DIGEST and INTRO operations repeat endlessly until
you stop playback.
The monitor can show up to nine screens at a time. The
number of screens varies from disc to disc. There may be a
case that the monitor can show one screen only as follows:
To cancel DIGEST and INTRO operations
Press the STOP button.
Notes
This button can work only when playing a Video CD.
To return to normal-speed playback, press the PLAY button.
To play a Video CD slowly
To repeat playback
DIGEST
INTRO
SLOW
S/F REP
To skip through tracks forward or
backward
Pressing the TIME INDEX or button once allows you to
skip through the track backward or forward respectively by the
time shown on the display.
When you press a button several times in a short period of
time, the time to skip changes on the display. Releasing the
button moves the position by the displayed time before or
after. The skip operation varies as follows:
While you are playing a Video CD or CD, you can skip
forward or backward through the entire disc.
While you are playing programmed tracks in the Karaoke
mode, the skip is made forward or backward through the
entire disc including unprogrammed tracks.
While you are playing a Video CD, version 2.0 in the
Playback Control mode, you can skip forward or backward
through the selected track.
TIME INDEX
13
English
To monitor the operation status
Pressing the ON SCREEN button once shows the status
screen on the video monitor. You can easily monitor the
operations of this unit such as play, search, and stop. Pressing
the button again cancels this function.
Note
This function is not available for CDs.
To enter the KARAOKE mode
A pause is inserted each time a play of track ends. To begin
playing the next track, press the PLAY/REPEAT button.
While this unit is paused, “ : ” flashes on and off on the time
display.
In this mode, you can program tracks for singing Karaoke.
See page 15–17 for details.
Some adjustments can be made on this unit for enjoying
Karaoke. See page 14 for details.
Notes
If
“PBC” is illuminated on the display, pressing the KARAOKE
button to enter the Karaoke mode will cancel the Playback
Control mode (turn “PBC” off) and stop this unit.
If the pause mode is engaged for 10 minutes, the unit is
stopped automatically to protect the internal mechanism.
To cancel this function
Press the KARAOKE button again. “KARAOKE” disappears
from the display.
KARAOKE
KARAOKE
ON SCREEN
During play, you can open the disc tray by pressing the
PLAYXCHANGE button without interrupting disc play. In this
case, pressing the DISC SKIP button has no effect.
Note
You can load or replace discs on the tray when the disc tray is
opening, however, never load a disc on the recess hidden
inside the unit. In doing so, the disc and the unit may be
damaged, because the recess already has a disc, which is
being played.
Exchanging discs while playing
another disc
PLAYXCHANGE
ECHO
MPX
KARAOKE
KEY CONTROL DISC SKIP
SKIP
/
SEARCH
PREV NEXT
+10
12
34
56
7
89
0
LEVEL
KEY CONTROL
MIC 1 MIC 2
OPEN
/
CLOSE
STOP
/
RETURN
PLAY
/
SELECT
PLAYXCHANGE
MIN MAX MIN MAX
14
Pressing the KEY CONTROL buttons change key of the track
currently playing. The current key level is shown on the
display. Whenever a track changes, its original key level is
restored.
: Whenever pressed, key of the track becomes lower in 6
steps.
: Pressing this button restores the original key level of
the track.
: Whenever pressed, key of the track becomes higher in
6 steps.
Adjustments for enjoying Karaoke
You can select any of four audio output modes by pressing the
MPX button.
Turning the LEVEL control clockwise increases the level, and
counterclockwise decreases the level.
Turning the ECHO control clockwise increases the level, and
counterclockwise decreases the level.
If you need no echo effect, set this control to the “MIN”
position.
Display
indication
Audio output mode
Normal stereo output
Sound from the left channel only is
output from both the left and right
speakers.
Sound from the right channel only is
output from both the left and right
speakers.
Sound of vocals on the source is
attenuated.
Note: There may be a case that
vocals cannot be attenuated
effectively according to a source.
In this mode, if a microphone is
connected to this unit, the “VC”
indication blinks. When you sing to
the microphone, vocal sound on the
source is attenuated. When the
microphone does not sense your
vocal, vocal sound on the source is
output.
LR
L
R
VC
LEVEL
MIN MAX
ECHO
MIN MAX
MPX
KEY CONTROL
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
KEY
CONTROL
MPX
MPX KEY CONTROL ECHO LEVEL
Adjusting key of the track
currently playing
Changing audio output mode
Adjusting the level of sound signals
input from the microphone(s)
Adjusting the level of echo
applied to sound signals
input from the microphone(s)
1 Load discs on the disc tray.
2 Press the KARAOKE button so that “KARAOKE” lights
up on the display. To cancel it, press the KARAOKE
button once again.
3
4 Select the disc (before “DISC” and “MUSIC” stop
flashing on the display).
5 Select the track (before “DISC” and “MUSIC” stop
flashing on the display).
6
7 To start play, press the PLAY/REPEAT button.
* This unit pauses whenever a play of track ends. To start
playing the next track, press the PLAY/REPEAT button.
8 Repeat step 3–6 to program more selections.
9 If necessary, change the audio output mode by pressing
the MPX button.
Use the KEY CONTROL buttons and the LEVEL and
ECHO controls as you prefer. (See page 14 for details.)
Notes
In step 4 or 5, if “DISC” and “MUSIC” stop flashing on the
display before you finish programming a track, press the
PROG button again.
If you program a track number which is higher than the
highest track number on the disc, “E rr” appears on the
display and it cannot be programmed.
This unit can store as many as 10 selections at one time. If
you program a track number as the eleventh program, the
tenth program is replaced with it.
ECHO
DISC SKIP
SKIP
/
SEARCH
PREV NEXT
7
89
0
LEVEL
KEY CONTROL
MIC 1 MIC 2
OPEN
/
CLOSE
STOP
/
RETURN
PLAY
/
SELECT
PLAYXCHANGE
MIN MAX MIN MAX
15
English
PRE-PROGRAMMING SELECTIONS
(FOR SINGING KARAOKE)
Programming is possible either while the unit is playing a
disc or stopped.
As many as 10 selections can be stored at one time.
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
12345
67890
+10
SELECT
PLAY/REPEAT
PROG
DISC SKIP
KARAOKE
KARAOKE
MUSIC L RDISC
ENTER
5
9
2
6
7
3
9
4
Flashes.
9
Display information during programming
Shows the program number for the track to be programmed
next.
Shows the selected disc and track number.
1
The disc number, the track number and the program
number of the last selection will flash on the display.
2
Each time the SKIP button is pressed, the disc
numbers, the track numbers and sequential order of the
programmed tracks can be checked one after another.
The display of the track number can be returned
(sequentially in reverse order) by pressing the SKIP
button.
3 When the check is completed;
To correct the selection currently playing
There are two methods, as described below.
1) Select the track to replace the one currently playing by using
the DISC SKIP button and the numeric buttons.
2) Select the track to replace the one currently playing by using
the DISC SKIP button and the SKIP buttons.
16
To check program data
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
CANCEL
SKIP
PREV NEXT
CANCEL
Numeric
buttons
DISC SKIP
2
1, 3
MUSIC L RDISC
KARAOKE
VIDEO CD
PROG
AUTO
MUSIC L RDISC
KARAOKE
VIDEO CD
PROG
AUTO
1
The disc number and the track number of the last
selection will flash on the display.
2
Display the disc number and the track number to be
canceled.
3
Press once while the number is flashing.
17
English
Notes
The SEARCH buttons can be used during play to search all
tracks including tracks not programmed.
When programs consist of tracks from more than one disc, if
you change a disc by using the PLAYXCHANGE button, the
programmed track on the removed disc is replaced by the
same numbered track on the new disc.
If the same number of the programmed track does not exist
on the new disc, the program will substitute the highest-
numbered track on the new disc.
EXAMPLE:
Program
Swap disc 4 (new disc has 9 tracks only)
Disc 1, Track 5 Disc 1, Track 5
Disc 2, Track 8 Disc 2, Track 8
Disc 4, Track 12 Disc 4, Track 9
To cancel a programmed selection
To cancel the selection you are currently
programming
There are two methods, as described below.
1) Press the CANCEL button instead of the ENTER button
after the track number is selected.
2) If about 30 seconds pass with no operation after the track
number is selected, the track will not be programmed.
To cancel all program data
Switch off the power.
CANCEL
SKIP
PREV NEXT
ENTER
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
2
13
18
PLAYBACK CONTROL OF VIDEO CD (Ver. 2.0)
This function is available for Video CDs, version 2.0 only.
“PBC” will light up on the display when a version 2.0 disc is
used.
The Playback Control differs with each disc. This section gives
a basic explanation of Playback Control. Refer to the
instruction manual for the disc for details.
Playback Control provides you with two types of new playback
enjoyment.
Playback selection on a screen menu
You can select pictures, music and information to play back by
selecting items on a screen menu. (Similar to having a
conversation.)
Playback of high quality pictures
You can enjoy watching pictures which are four times higher in
quality than moving pictures.
A Flowchart of Playback Control (as an example)
Mode just after the
disc is selected
Playback ends.
Movie
Movie
Movie
Movie
Movie
Picture
Picture
Picture Picture
Picture
Picture
Picture
Picture
Picture
Picture
Picture
Screen
menu
Screen
menu
1
1
12
NEXT
PREV
34
2
2
3
Picture Picture
RETURN
RETURN
RETURN
RETURN RETURN
19
English
1 Stop this unit and select a Video CD (version. 2.0).
2
A screen menu appears.
* Some discs show several short movies
sequentially instead of a menu.
3 Select the number of item you want to play.
* If the disc shows several short movies
sequentially, press the PLAY/REPEAT button
when a desired picture appears.
4 Play starts, or another menu appears. If another menu
appears, repeat step 3.
(Some discs have more than one screen menu.)
5 If “NEXT” or “ ” appears on the screen during play,
pressing the NEXT button will change to the next menu.
If “PREV” or “ ” appears on the screen during play,
pressing the PREV button will restore the previous
menu.
6 If the play has finished, press the STOP/RETURN
button once or more to return to a previous mode.
To select a number higher than 9 in step 3
Example)
To select number 15
Press “+10” and “5” in succession.
To select number 26
Press “+10” twice, then press “6”.
Basic operation
Note
Disc play in the Playback Control mode depends on the data of
the disc used. So, according to the contents of disc, the
following operating method may not be applied to the disc.
Be sure to refer to the instruction manual for the disc.
Before operation
If “KARAOKE” is illuminated on the display, press the
KARAOKE button to cancel it.
(When “KARAOKE” is illuminated, a Playback Control
operation cannot be made.)
DISC SKIP
SELECT
PLAY/REPEAT
12345
67890
+10
SELECT
PLAY/REPEAT
SKIP
PREV NEXT
SKIP
PREV NEXT
RETURN
STOP
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
3
5
6
2, 3
1
20
To return to a previous screen
mode during play
If the disc has index numbers
To stop play
Pressing the INDEX or button once or more searches
for and select any index number. Play starts from the point of
selected index number.
Press once.
* To return to the first screen mode, press the STOP/RETURN
button repeatedly until the first screen mode appears.
Press and hold for more than
2 seconds.
To play a Video CD (ver. 2.0) without
Playback Control operation
Press and hold the STOP/RETURN button for more than 2
seconds when this unit is stopped. “PBC” disappears from the
display, and this unit turns into a normal play mode.
To restore the Playback Control mode again, press and hold
the STOP/RETURN button for more than 2 seconds.
RETURN
STOP
RETURN
STOP
RETURN
STOP
INDEX
Note
When you press the DISC SKIP button or a numeric button to
select a desired track in the Playback Control mode, the unit
cancels the mode and starts playing the selected track.
21
English
HANDLING COMPACT DISCS
To remove a disc from its storage case, open the case and
then press down at the center; with a finger through the
center hole and the outer edges held as shown in the
illustration, lift the disc out carefully.
Always handle the disc with care so that its surface is not
scratched.
Discs are not subjected to wear during play, but disc surface
damage when the disc is being handled can adversely affect
the disc’s play.
Discs are not affected by small particles of dust or
fingerprints on their playing surface, but even so they should
be kept clean. Wipe by using a clean, dry cloth. Do not
wipe with a circular motion; wipe straight outward from the
center.
Do not try to clean the disc’s surface by using any type of
disc cleaner, record spray, anti-static spray or liquid, or any
other chemical-based liquid, because such substances might
irreparably damage the disc’s surface.
Do not expose discs to direct sunlight, high temperature or
high humidity for a long period of time, because these might
warp or otherwise damage the disc.
To play a 8-cm (3-inch) CD
Place it in the inner recessed area of the disc tray. Do not put
a normal (12-cm/5-inch) CD on top of a 8-cm CD.
No!
Battery installation
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
Use only AA, R6, UM-3 batteries for replacement.
Be sure polarities are correct. (See illustration inside battery
compartment.)
Remove batteries if remote control transmitter will not be
used for an extended period of time.
If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
Remote control transmitter operation range
Notes
There should be no large obstacles between the remote
control transmitter and the main unit.
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter to not work
correctly. In this case, reposition the main unit to avoid
direct lighting.
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
2
1
3
30°
30°
Remote control
sensor
Within approximately
6 m (19.7 feet)
22
Audio (analog) output level (only when playing CD)
1 kHz, 0 dB................................................................ 2 ± 0.5V
Signal to noise ratio (only when playing CD)
........................................................................ 100 dB or more
Dynamic range (only when playing CD)
.......................................................................... 96 dB or more
Harmonic distortion + noise
1 kHz ............................................................. 0.0035% or less
Frequency response
2 Hz–20 kHz ............................................................... ±0.5 dB
Video output
75, Negative sync. .............................................. 1 terminal
Video output level ........................................................ 1 Vp-p
Mic input ....................................................................... 2 jacks
Signal processing
KEY CONTROL, ECHO................................................ Digital
Power requirements
China model................................................. AC 220V, 50 Hz
Singapore model.......................................... AC 230V, 50 Hz
General model.................... AC 110/120/220/240V, 50/60 Hz
Power consumption ........................................................ 25W
Dimensions (W x H x D) ......................... 435 x 116 x 403 mm
Weight ............................................................................... 6 kg
Accessories ................................... Audio connection cord x 1
Video connection cord x 1
Remote control transmitter
Batteries (size AA, R6, UM-3)
Please note that all specifications are subject to change
without notice.
SPECIFICATIONS
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and
contact your authorized YAMAHA dealer or service center for help.
SYMPTOM
This unit does not switch ON when the
POWER switch is pressed.
It happens that this unit does not work
normally.
The disc tray does not close completely.
Play does not begin.
Play is delayed, or begins at the wrong
place.
A disc cannot be played normally, or there
is a noise during play.
No sound or no picture.
No picture.
Sound and picture “skip”.
Sound “hums”.
Noise from a nearby tuner.
Noise from inside of the disc tray.
The remote control transmitter does not
work.
PROBABLE CAUSE
The power cord is not connected or not
completely connected.
There is an influence of strong external noise
(lightning, excessive static electricity, etc.) or a
misoperation on this unit while using this unit.
A foreign object is obstructing the tray.
The disc is damaged.
There is moisture on the laser pickup.
The disc has been loaded upside down.
The disc is dirty.
The disc may be scratched or damaged.
A nonstandardized disc is played.
Improper output cable connections.
Improper amplifier operation.
The setting of the VIDEO OUT MODE
SELECT switch is improper.
This unit is being subjected to vibrations or
impacts.
The disc is dirty.
Improper cable connections.
The tuner is too close to this unit.
The disc may be warped.
The batteries of this remote control transmitter
are too weak.
Direct sunlight or lighting (of an inverter type
of fluorescent lamp etc.) is striking the remote
control sensor of the main unit.
REMEDY
Securely connect the power cord.
Turn the power to this unit off and disconnect
the AC power cord from the AC outlet. After
about 30 seconds have passed, connect the
power and operate this unit again.
Carefully check the disc tray and remove the
foreign object.
Check the disc carefully; replace it if
necessary.
Wait 20 to 30 minutes after switching the unit
ON before trying to play a disc.
Reload the disc with the label side up.
Clean the disc.
Check the disc carefully; replace it if
necessary.
Play another disc.
Connect the cables properly. If the problem
persists, the cables may be defective.
Set the amplifier controls to the correct input
selection.
Set the VIDEO OUT MODE SELECT switch to
another proper position.
Relocate this unit.
Clean the disc.
Securely connect the audio cables. If the
problem persists, the cables may be defective.
Move the tuner and this unit farther apart.
Replace the disc.
Replace the batteries with new ones.
Change position of the main unit.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VZ12510

Transcripción de documentos

R VCD-120K NATURAL SOUND VIDEO CD CHANGER NATURAL SOUND VIDEO CD CHANGER PLAY/SELECT VIDEO CD STOP/RETURN MPX KARAOKE KEY CONTROL DISC SKIP ECHO SKIP/SEARCH PREV NEXT LEVEL OPEN/CLOSE PLAYXCHANGE MIC 1 MIC 2 KEY CONTROL POWER +10 1 2 3 4 5 6 7 8 9 0 MIN GRAPHICS MAX MIN MAX OWNER’S MANUAL Thank you for selecting this YAMAHA Video CD changer. This unit can play discs of the following types only. Type of disc Mark printed on the disc Type of signal recorded Sound + Picture (Movie) Video CD CD (including CD-G) GRAPHICS Sound only Sound + Still picture Size (Dimension) Maximum possible play time 12 cm 74 minutes 8 cm (Single type) 20 minutes 12 cm 74 minutes 8 cm (Single type) 20 minutes Never attempt to load a disc other than above into the unit because it may cause a damage to this unit and/or other units connected to this unit. VIDEO CD Video CDs are classified into two types, version 1.1 and 2.0. This unit can play not only discs of version 1.1, but also version 2.0 on which a Playback Control can be made. Video CD, version 1.1: With the same operation as compact discs, you can enjoy sounds and pictures (movies). Video CD, version 2.0: In addition to a normal play which is the same as discs of version 1.1, you can make a Playback Control. (For details on Playback Control, refer to page 18.) FEATURES ● 5-Disc Carousel Auto-Changer (for Playing Video CDs and Compact Discs) ● Audio Output Mode Selector (MPX) Button for Karaoke ● Full Opening Disc Tray for Changing 5 Discs at a Time ● 13 Step Key Level Control Buttons ● PLAYXCHANGE; Disc Changing Capability while Playing Another ● Video Output Format Selector (VIDEO OUT MODE SELECT) Switch ● Random Access Programmable Play ● Two MIC Jacks and a Mini-Jack for Connecting with a Key Control Function of a Microphone ● Single Track/Full Disc Repeat Play ● Playback Control Function Available for Video CDs, Version 2.0 ● Automatic Pause Inserting Function for Karaoke (Karaoke Mode) ● Quick Overview of a Track and a Disc with a Touch of the DIGEST and INTRO Buttons ● Mic Level and Echo Level Controls ● On Screen Display Function (Displays This Unit’s Operation Status on the TV Monitor) ● Remote Control Capability CONTENTS Caution ............................................................3 Connections ....................................................4 Controls and Their Functions ..........................6 Basic Operations .............................................9 Pre-Programming Selections (for Singing Karaoke) ........................................................15 Playback Control of Video CD (Ver. 2.0) ......................................................................18 Notes about the Remote Control Transmitter ......................................................................21 Handling Compact Discs ...............................21 Troubleshooting .............................................22 Specifications ................................................22 2 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to rain or water. WARNING To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. 3 Do not operate the unit upside-down. It may overheat, possibly causing damage. 4 Never open the cabinet. If a foreign object drops into the unit, contact your dealer. DANGER Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 5 This player should not be placed on appliances, such as amplifiers, that produce heat, or placed in a cabinet that impedes the flow or air. This may result in a failure in this player. Install the player in a well ventilated place. In addition, do not place objects on the player. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 6 Do not use force on switches, knobs or cords. When moving the set, first turn the unit off. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself. 7 Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 8 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that your unit is faulty. 9 English CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CLASS 1 LASER PRODUCT This compact disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located on the rear exterior. (China and Singapore models) Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. To prevent lightning damage, unplug the power cord and remove the antenna cable during electrical storms. 10 The generated digital signals may interfere with other equipment such as tuners or receivers. Move the system farther away from such equipment if interference is observed. 11 Voltage selector (General model only) The voltage selector (on the rear panel of this unit) must be correctly set to the voltage used locally before making any connection to the AC power supply. This unit is designed for home use only. Do not use this unit for business purposes. NOTE: Please check the copyright laws in your country before recording from records, compact discs, radio, etc. Recording of copyrighted material may infringe copyright laws. CAUTION As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. Laser Diode Properties • Material: GaAlAs • Wavelength: 780nm • Emission Duration: continuous • Laser Output: max. 44.6µW* * This output is the value measured at a distance of about 200mm from the objective lens surface on the Optical Pickup Block. CAUTION FOR CARRYING THIS UNIT Be sure not to carry or tip the unit with discs remaining in it. CAUTION FOR MOVING THIS UNIT When moving this unit, first remove all discs from the disc tray and close the tray by pressing the OPEN/CLOSE button, and then switch off the power after you confirm that the display indicates as follows. DISC MUSIC Never switch off the power if the display is not pictured as above, otherwise the unit will break down during moving because the internal mechanism is not locked. 3 CONNECTIONS ● ● Before making any connections, switch OFF the power to this unit, the amplifier, the video monitor, etc. Connections should be made to the correct input terminals of the amplifier, the video monitor, etc. ● If the placement of this unit causes interference to other equipment, separate them from each other. Video monitor VIDEO IN This unit (General model) Video connection cord (included) LINE OUT VIDEO OUT VOLTAGE SELECTOR 12 0V 0V 220V MODE SELECT AUTO R PAL 11 L 240V NTSC To AC outlet Amplifier Audio connection cord (included) CD Connecting to the amplifier Connecting to the video monitor Connect the LINE OUT terminals to the audio input terminals of the amplifier (marked as “CD”, “AUX”, etc.) by using the included audio connection cord. Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier. Connect this unit’s VIDEO OUT terminal to the video input terminal of the video monitor by using the included video connection cord. 4 English Setting the VIDEO OUT MODE SELECT switch This unit is designed for use with the NTSC and PAL television formats. Set this switch to the position for the format your video monitor employs. PAL: VIDEO OUT Outputs signals in the PAL format no matter which format (PAL or NTSC) the currently playing disc employs. Set to this position if your video monitor employs the PAL format. MODE SELECT AUTO PAL NTSC AUTO: Outputs signals in the same format as the currently playing disc employs. Set to this position if your video monitor can be switched in between the PAL and NTSC formats automatically. NTSC: Outputs signals in the NTSC format no matter which format (PAL or NTSC) the currently playing disc employs. Set to this position if your video monitor employs the NTSC format. Connecting microphones for singing Karaoke One or two microphones can be connected to this unit. Moreover, if you have a Yamaha microphone which has a key control function, connect the mini-plug connector cable of the microphone to the KEY CONTROL jack of this unit. This connection allows you to change key of source sound by using controls on the microphone. Microphone PLAY/SELECT STOP/RETURN DISC SKIP ECHO SKIP/SEARCH PREV NEXT LEVEL Microphone (with a key control function) OPEN/CLOSE PLAYXCHANGE MIC 1 MIC 2 KEY CONTROL 6 7 8 9 0 MIN MAX MIN MAX 5 CONTROLS AND THEIR FUNCTIONS FRONT PANEL 1 23 4 5 6 78 9 0 NATURAL SOUND VIDEO CD CHANGER OPEN/CLOSE PLAY/SELECT VIDEO CD STOP/RETURN MPX KARAOKE KEY CONTROL DISC SKIP ECHO SKIP/SEARCH PREV NEXT MIC 1 LEVEL MIC 2 KEY CONTROL POWER +10 1 2 3 4 5 6 7 8 9 0 MIN A PLAYXCHANGE B C D MAX E MIN MAX F G H REMOTE CONTROL TRANSMITTER 1 Disc tray Up to 5 discs can be loaded on the disc tray. Five disc-setting positions on the disc tray are numbered from 1 to 5. 2 MPX button 2 KEY CONTROL 4 3 I J K L M N O P Q KARAOKE OPEN/CLOSE 9 R MPX ON SCREEN PROG CANCEL ENTER S/F REP +10 1 2 3 4 5 6 7 8 9 0 DIGEST INTRO DISC SKIP TIME INDEX SEARCH INDEX PREV SKIP NEXT SLOW PAUSE STOP RETURN PLAY/REPEAT SELECT S D 5 6 8 7 Whenever this button is pressed, audio output mode changes. The currently selected audio output mode is shown on the display. (Refer to page 14 for details.) 3 KARAOKE button When this button is pressed so that “KARAOKE” lights up on the display, a pause is inserted each time a play of track ends. Pressing this button once more will cancel this function. 4 KEY CONTROL buttons These buttons are available when the Karaoke mode is selected or a microphone is connected to this unit. Pressing these buttons changes key of the track currently playing. The current key level is shown on the display. : Whenever pressed, key of the track becomes lower. : Pressing this button restores the original key level of the track. : Whenever pressed, key of the track becomes higher. 5 DISC SKIP button(s) Whenever this button is pressed, the disc tray rotates and the selected disc changes. Pressing the side rotates the disc tray clockwise and pressing the side rotates the disc tray counterclockwise. 6 English 6 SKIP/SEARCH (PREV and NEXT) buttons G MIC (1 and 2) jacks One or two microphones can be connected to these jacks. SKIP: Pressing this button locates the beginning of the next track (or the currently playing track or the previous track). SEARCH: Pressing and holding this button advances (or reverses) the play rapidly. PREV and NEXT: Functions only when a Playback Control operation is made on a Video CD, version 2.0. Pressing the NEXT side selects the next display mode, and pressing the PREV side restores the previous display mode. * For some discs, this key operation will not function. 7 STOP/RETURN button Stops playing a disc during a normal disc play. During a Playback Control operation, press this button to return to a previous screen menu mode. When playing a Video CD, pressing this button for 2 seconds or more calls a Playback Control mode. 8 PLAY/SELECT (PLAY/REPEAT) button Pressing this button starts playing a Video CD, version 1.1 and CD. If this button is pressed while playing a disc, play will restart from the beginning of the track currently playing. When this unit is in a Playback Control mode for Video CDs, version 2.0, pressing this button selects a screen menu mode. 9 OPEN/CLOSE button Opens and closes the disc tray. 0 PLAYXCHANGE button Press this button to open and close the disc tray while playing a disc. This is useful when you want to exchange discs while playing another disc. A POWER switch Press this switch to switch the power on. Press it again to switch the power off. H KEY CONTROL jack If you have a Yamaha microphone which has a key control function, connect the mini-plug connector cable of the microphone to this jack. This connection allows you to change key of source sound by using controls on the microphone. I PROG button This button is available only when “KARAOKE” is illuminated on the display. This button is used for programming tracks. (Refer to page 15 for details.) J CANCEL button Used to cancel a programmed track. (Refer to page 16–17 for details.) K ENTER button Used for programming tracks. (Refer to page 15 for details.) L DIGEST button Press this button to watch up to nine scenes of a track on a Video CD. It gives you a quick overview of the track. M INTRO button Press this button to watch the beginning of all tracks on a Video CD. It gives you a quick overview of what’s on the disc, so that you can easily search for your favorites. N TIME INDEX buttons When you press these buttons during playback, you can skip through tracks to locate your desired position. Pressing the button once moves the location forward or backward. Pressing it several times allows you to move by the displayed time. (Refer to page 12 for details.) O INDEX buttons If the selected disc has index numbers, by pressing the button once or more, you can select a desired index number and play the disc from that point. or B Remote control sensor Receives signals from the remote control transmitter. P SLOW button C Display panel Plays a Video CD slowly. Press the PLAY button to return to normal-speed playback. See page 8. D Numeric buttons Used to select a track number. E ECHO control This control adjusts the level of echo applied to sound signals input from the microphone(s) connected to this unit’s MIC jacks. F LEVEL control This control adjusts the level of sound signals input from the microphone(s) connected to this unit’s MIC jacks. Q PAUSE button Suspends playback temporarily. Press the PLAY button to return to normal-speed playback. Pressing the PAUSE button during pause plays frames one by one: this function is available only for Video CDs. R ON SCREEN button Press this button to turn on and off the status screen on the video monitor. It gives you information about the current operation status of this unit. S S/F REP button Whenever you press this button, repeat play mode changes. The selected mode indication appears on the display for singletrack or full-disc repeat. It also allows you to turn off the mode. 7 DISPLAY PANEL 1 2 3 4 KARAOKE VIDEO CD PBC PROG AUTO NTSC PAL 8 DISC 5 6 MUSIC 9 L R 7 VC 0 1 VIDEO CD indicator Lights up when the selected disc is a Video CD. 7 Time display 2 KARAOKE indicator Lights up when the KARAOKE function is turned on by pressing the KARAOKE button, and goes off if the KARAOKE button is pressed once more. 8 PBC (Playback Control) indicator Shows elapsed time of the track currently playing, program number and so on. Lights up when this unit is in a Playback Control mode for playing a Video CD, version 2.0. 3 PROG indicator Lights up when this unit is in the program play mode. 9 Video signal output mode indicators 4 Disc number indicator (DISC) Shows the disc number of selected disc. 0 Key level indicator 5 Track number indicator (MUSIC) Shows the selected track number. 6 Audio output mode indicators The current audio output mode selected by pressing the MPX button is shown by these indicators. (Refer to page 14 for details.) 8 Show the current position of the VIDEO OUT MODE SELECT switch on the rear panel and the format of video output signal. Shows the key level of the source currently playing in 13 steps. : Lights up when the current key level is lower than the original level of the track. : Lights up when the current key level is the original level of the track. : Lights up when the current key level is higher than the original level of the track. English This manual mainly describes how to operate this unit by using the remote control transmitter. To operate this unit from the front panel, use the same named buttons on the front panel. BASIC OPERATIONS For information about the Playback Control operation for Video CDs, version 2.0, refer to pages 18–20. Loading discs and starting disc play KEY CONTROL KARAOKE OPEN/CLOSE MPX 2, 3 ON SCREEN NATURAL SOUND VIDEO CD CHANGER PROG CANCEL ENTER S/F REP +10 1 VIDEO CD 2 3 4 5 6 7 8 9 0 DIGEST INTRO MPX KARAOKE 1 POWER +10 1 STOP/ RETURN DISC SKIP TIME INDEX SEARCH INDEX PREV SKIP NEXT SLOW PAUSE STOP RETURN 1 Turn the power on. PLAY/REPEAT SELECT 4 4 Start a disc play. POWER PLAY/REPEAT SELECT 2 Open the disc tray and load discs. Play will begin from the first track of Disc 1 automatically. * If you want to play a desired track on another disc, see the next page. OPEN/CLOSE To stop play Label side upward. STOP RETURN Disc tray This unit stops at the beginning of the first track on the disc. 3 Close the disc tray. OPEN/CLOSE Note Additionally, you can close the disc tray by the following ways. If the tray is closed by these ways, play will begin automatically. ● Press the PLAY/SELECT button. (Play will begin from the first track of Disc 1.) ● Press a numeric button. ● Press the front edge of the disc tray gently. (Play will begin from the first track of Disc 1.) Notes ● If the STOP/RETURN button is not pressed (except when “KARAOKE” is illuminated on the display), play will not stop until the last track on the last-numbered disc has been played. ● When you press the STOP button during Video CD playback except in the Playback Control and Karaoke modes, the unit stops five seconds before the playback ends and displays the time. The unit is in the resume play mode. Pressing the PLAY button in the resume play mode starts playing from the last playback position. Pressing the STOP button again when the unit is in the resume play mode cancels the resume play mode. 9 To play a desired track KEY CONTROL KARAOKE OPEN/CLOSE MPX ON SCREEN PROG CANCEL ENTER S/F REP +10 2 1 2 3 4 5 6 7 8 9 0 DIGEST INTRO DISC SKIP TIME INDEX SEARCH INDEX PREV SKIP NEXT SLOW PAUSE STOP RETURN 1 STOP/ RETURN PLAY/REPEAT SELECT Selecting a track (by using the numeric buttons) 1 If necessary, select a desired disc. KARAOKE DISC SKIP ON SCREEN PROG To select track 5 Press “5”. * If you want to play from the first track on the disc, press the PLAY/REPEAT button. +10 1 2 3 4 5 6 7 8 9 0 Display information DISC ➁ ➂ MUSIC VIDEO CD AUTO NTSC PAL ➀ ➁ ➂ 10 To select track 12 Press “+10”, then press “2”. CANCEL ENTER S/F REP +10 1 2 3 4 5 6 7 8 9 0 DIGEST INTRO DISC SKIP To select track 26 Press “+10” twice, then press “6”. 2 Select a desired track number. ➀ MPX For example: Shows the tray number of the selected disc. Shows the selected track number. Shows the elapsed time of the selected track. Note If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played. Note If a Video CD, version 2.0 is selected, “PBC” lights up on the display. In this mode, disc play is controlled by the rule of Playback Control. (If, however, you select a disc and a track number continuously as explained above, “PBC” does not light up automatically.) For details of Playback Control, refer to pages 18–20. To cancel this mode and restore the normal play mode, press and hold the STOP/RETURN button for more than 2 seconds. “PBC” disappears from the display. To call the Playback Control mode again, press and hold the STOP/RETURN button for more than 2 seconds. It is possible to change between the modes only when the unit stops. To advance or reverse play rapidly (Manual search) To advance rapidly PLAY/REPEAT SEARCH SELECT (press and hold) To reverse rapidly SEARCH To skip to the beginning of a desired track (press and hold) • ● To play from the beginning of the track following the one currently playing PREV SKIP NEXT • • ● To play from the beginning of the track currently playing The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. Manual search can also be performed while disc play is paused, though no sound will be heard. When using the SKIP/SEARCH button on the front panel: Be careful not to release the button just after it is pressed, otherwise the play is skipped to the beginning of the next track or returned to the beginning of the current track. PREV SKIP NEXT To suspend playback temporarily ● To play from the beginning of the track before the one currently playing PAUSE PREV SKIP NEXT (twice) Notes • These operations can also be performed when the unit is in the pause or stop mode. • When using the SKIP buttons on the remote control transmitter: If a button is pressed and held, the track number is continuously changed to higher numbers (or lower numbers). When using the SKIP/SEARCH button on the front panel: Be careful not to press and hold the button, otherwise the selected track is played forward (or backward) rapidly. Notes ● Pressing the PAUSE button during pause plays frames one by one. This function is available only for Video CDs. ● To resume playback, press the PLAY button. ● When a Video CD is played, you can make fine adjustments to the paused position pressing the PAUSE button several times. You can also switch to slow playback with the SLOW button. ● If playback pauses for 10 minutes, the operation stops automatically to protect the internal mechanism. 11 English To replay from the beginning of the track currently playing To repeat playback Pressing the S/F REP button allows you to play any desired track or disc repeatedly. To get a quick overview of a track or a disc (for Video CDs only) To watch scenes of a track on a Video CD DIGEST S/F REP Whenever you press the button, the repeat play mode indication appears on the display as follows: To watch the beginning of all tracks on a Video CD INTRO Display indication Repeat play mode Single repeat mode for playing a track repeatedly Full repeat mode for playing all tracks on a disc repeatedly You can watch up to nine screens at a time on the video monitor. Off (no repeat) Notes ● The single repeat mode overrides the program play mode. Programmed playback cannot resume until this repeat mode is turned off. ● These repeat modes can work when playing all types of CDs, Video CDs, version 1.1 and Video CDs, version 2.0. However, they cannot work when playing Video CDs, version 2.0 in the Playback Control mode. Notes ● This button can work only for playing a Video CD. ● These DIGEST and INTRO operations repeat endlessly until you stop playback. ● The monitor can show up to nine screens at a time. The number of screens varies from disc to disc. There may be a case that the monitor can show one screen only as follows: To skip through tracks forward or backward Pressing the TIME INDEX or button once allows you to skip through the track backward or forward respectively by the time shown on the display. To cancel DIGEST and INTRO operations Press the STOP button. TIME INDEX To play a Video CD slowly When you press a button several times in a short period of time, the time to skip changes on the display. Releasing the button moves the position by the displayed time before or after. The skip operation varies as follows: ● While you are playing a Video CD or CD, you can skip forward or backward through the entire disc. ● While you are playing programmed tracks in the Karaoke mode, the skip is made forward or backward through the entire disc including unprogrammed tracks. ● While you are playing a Video CD, version 2.0 in the Playback Control mode, you can skip forward or backward through the selected track. 12 SLOW Notes ● This button can work only when playing a Video CD. ● To return to normal-speed playback, press the PLAY button. Pressing the ON SCREEN button once shows the status screen on the video monitor. You can easily monitor the operations of this unit such as play, search, and stop. Pressing the button again cancels this function. ON SCREEN KARAOKE KARAOKE • • Note This function is not available for CDs. English To enter the KARAOKE mode To monitor the operation status • A pause is inserted each time a play of track ends. To begin playing the next track, press the PLAY/REPEAT button. While this unit is paused, “ : ” flashes on and off on the time display. In this mode, you can program tracks for singing Karaoke. See page 15–17 for details. Some adjustments can be made on this unit for enjoying Karaoke. See page 14 for details. Notes If “PBC” is illuminated on the display, pressing the KARAOKE button to enter the Karaoke mode will cancel the Playback Control mode (turn “PBC” off) and stop this unit. • If the pause mode is engaged for 10 minutes, the unit is stopped automatically to protect the internal mechanism. • Exchanging discs while playing another disc During play, you can open the disc tray by pressing the PLAYXCHANGE button without interrupting disc play. In this case, pressing the DISC SKIP button has no effect. To cancel this function Press the KARAOKE button again. “KARAOKE” disappears from the display. PLAYXCHANGE Note You can load or replace discs on the tray when the disc tray is opening, however, never load a disc on the recess hidden inside the unit. In doing so, the disc and the unit may be damaged, because the recess already has a disc, which is being played. 13 Adjustments for enjoying Karaoke KEY CONTROL KEY CONTROL KARAOKE OPEN/CLOSE MPX MPX ON SCREEN PROG CANCEL ENTER S/F REP PLAY/SELECT OPEN/CLOSE +10 STOP/RETURN 1 2 3 4 5 6 7 8 9 0 MPX KARAOKE KEY CONTROL DISC SKIP ECHO SKIP/SEARCH PREV NEXT PLAYXCHANGE MIC 1 LEVEL MIC 2 KEY CONTROL +10 1 2 3 4 5 6 7 8 9 0 MIN Adjusting the level of sound signals input from the microphone(s) MPX KEY CONTROL MAX ECHO MIN MAX LEVEL LEVEL MIN MAX Turning the LEVEL control clockwise increases the level, and counterclockwise decreases the level. Adjusting the level of echo applied to sound signals input from the microphone(s) ECHO Changing audio output mode You can select any of four audio output modes by pressing the MPX button. MIN MAX MPX Turning the ECHO control clockwise increases the level, and counterclockwise decreases the level. If you need no echo effect, set this control to the “MIN” position. Display indication Audio output mode Normal stereo output L R L Sound from the left channel only is output from both the left and right speakers. R Sound from the right channel only is output from both the left and right speakers. VC Pressing the KEY CONTROL buttons change key of the track currently playing. The current key level is shown on the display. Whenever a track changes, its original key level is restored. KEY CONTROL Sound of vocals on the source is attenuated. Note: There may be a case that vocals cannot be attenuated effectively according to a source. In this mode, if a microphone is connected to this unit, the “VC” indication blinks. When you sing to the microphone, vocal sound on the source is attenuated. When the microphone does not sense your vocal, vocal sound on the source is output. 14 Adjusting key of the track currently playing : Whenever pressed, key of the track becomes lower in 6 steps. : Pressing this button restores the original key level of the track. : Whenever pressed, key of the track becomes higher in 6 steps. English PRE-PROGRAMMING SELECTIONS (FOR SINGING KARAOKE) ● ● 9 2 3 5 KEY CONTROL KARAOKE OPEN/CLOSE 9 6 MPX ON SCREEN PROG CANCEL Programming is possible either while the unit is playing a disc or stopped. As many as 10 selections can be stored at one time. ENTER S/F REP +10 1 2 3 4 5 6 7 8 9 0 DIGEST INTRO PLAY/SELECT STOP/RETURN 4 DISC SKIP DISC SKIP SEARCH INDEX PREV SKIP NEXT 8 9 PAUSE STOP RETURN 7 PLAY/REPEAT SELECT 1 Load discs on the disc tray. 2 Press the KARAOKE button so that “KARAOKE” lights up on the display. To cancel it, press the KARAOKE MIC 1 LEVEL MIC 2 0 MIN SLOW PLAYXCHANGE KEY CONTROL 7 TIME INDEX ECHO SKIP/SEARCH PREV NEXT OPEN/CLOSE MAX MIN MAX 9 6 ENTER button once again. 7 To start play, press the PLAY/REPEAT button. KARAOKE KARAOKE PLAY/REPEAT SELECT 3 Flashes. PROG DISC MUSIC L R * This unit pauses whenever a play of track ends. To start playing the next track, press the PLAY/REPEAT button. 8 Repeat step 3–6 to program more selections. 4 Select the disc (before “DISC” and “MUSIC” stop flashing on the display). DISC SKIP 9 Ifthenecessary, change the audio output mode by pressing MPX button. Use the KEY CONTROL buttons and the LEVEL and ECHO controls as you prefer. (See page 14 for details.) 5 Select the track (before “DISC” and “MUSIC” stop flashing on the display). +10 1 2 3 4 5 6 7 8 9 0 Notes ● In step 4 or 5, if “DISC” and “MUSIC” stop flashing on the display before you finish programming a track, press the PROG button again. ● If you program a track number which is higher than the highest track number on the disc, “E rr” appears on the display and it cannot be programmed. ● This unit can store as many as 10 selections at one time. If you program a track number as the eleventh program, the tenth program is replaced with it. 15 Display information during programming KARAOKE VIDEO CD PROG AUTO DISC MUSIC L ➀ Shows the program number for the track to be programmed next. Shows the selected disc and track number. ➁ R ➀ KARAOKE VIDEO CD PROG AUTO DISC MUSIC L R ➁ KEY CONTROL KARAOKE OPEN/CLOSE MPX ON SCREEN 1, 3 Numeric buttons PROG CANCEL ENTER S/F REP +10 1 2 3 4 5 6 7 8 9 0 DIGEST INTRO DISC SKIP TIME INDEX SEARCH INDEX PREV SKIP NEXT SLOW PAUSE STOP RETURN DISC SKIP 2 PLAY/REPEAT SELECT To check program data 1 CANCEL 3 When the check is completed; CANCEL The disc number, the track number and the program number of the last selection will flash on the display. 2 PREV SKIP NEXT To correct the selection currently playing There are two methods, as described below. 1) Select the track to replace the one currently playing by using the DISC SKIP button and the numeric buttons. 2) Select the track to replace the one currently playing by using the DISC SKIP button and the SKIP buttons. Each time the SKIP button is pressed, the disc numbers, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. 16 KARAOKE English KEY CONTROL OPEN/CLOSE MPX ON SCREEN 1 PROG CANCEL ENTER S/F REP +10 1 2 3 4 5 6 7 8 9 0 DIGEST INTRO DISC SKIP TIME INDEX SEARCH INDEX PREV SKIP NEXT SLOW PAUSE STOP RETURN To cancel a programmed selection 1 CANCEL The disc number and the track number of the last selection will flash on the display. 2 3 2 PLAY/REPEAT SELECT To cancel the selection you are currently programming There are two methods, as described below. 1) Press the CANCEL button instead of the ENTER button after the track number is selected. 2) If about 30 seconds pass with no operation after the track number is selected, the track will not be programmed. To cancel all program data Switch off the power. PREV SKIP NEXT Display the disc number and the track number to be canceled. 3 ENTER Press once while the number is flashing. Notes ● The SEARCH buttons can be used during play to search all tracks including tracks not programmed. ● When programs consist of tracks from more than one disc, if you change a disc by using the PLAYXCHANGE button, the programmed track on the removed disc is replaced by the same numbered track on the new disc. If the same number of the programmed track does not exist on the new disc, the program will substitute the highestnumbered track on the new disc. EXAMPLE: Program Disc 1, Track 5 Disc 2, Track 8 Disc 4, Track 12 Swap disc 4 (new disc has 9 tracks only) Disc 1, Track 5 Disc 2, Track 8 Disc 4, Track 9 17 PLAYBACK CONTROL OF VIDEO CD (Ver. 2.0) Playback Control provides you with two types of new playback enjoyment. This function is available for Video CDs, version 2.0 only. “PBC” will light up on the display when a version 2.0 disc is used. The Playback Control differs with each disc. This section gives a basic explanation of Playback Control. Refer to the instruction manual for the disc for details. Playback selection on a screen menu You can select pictures, music and information to play back by selecting items on a screen menu. (Similar to having a conversation.) Playback of high quality pictures You can enjoy watching pictures which are four times higher in quality than moving pictures. A Flowchart of Playback Control (as an example) Mode just after the disc is selected RETURN 1 Movie Screen menu RETURN RETURN 2 Picture 3 RETURN Screen menu RETURN 2 1 NEXT Movie Movie Picture Picture Movie Movie Picture Picture 1 2 3 4 Picture Picture Picture Picture Picture Picture Picture Picture Playback ends. 18 PREV English Basic operation KEY CONTROL Note Disc play in the Playback Control mode depends on the data of the disc used. So, according to the contents of disc, the following operating method may not be applied to the disc. Be sure to refer to the instruction manual for the disc. Before operation If “KARAOKE” is illuminated on the display, press the KARAOKE button to cancel it. (When “KARAOKE” is illuminated, a Playback Control operation cannot be made.) KARAOKE MPX ON SCREEN PROG CANCEL ENTER S/F REP +10 3 6 1 Stop this unit and select a Video CD (version. 2.0). OPEN/CLOSE 1 2 3 4 5 6 7 8 9 0 DIGEST INTRO DISC SKIP TIME INDEX SEARCH INDEX PREV SKIP NEXT SLOW PAUSE STOP RETURN PLAY/REPEAT SELECT 1 5 2, 3 4 Play starts, or another menu appears. If another menu appears, repeat step 3. (Some discs have more than one screen menu.) DISC SKIP 5 Ifpressing “NEXT” or “ ” appears on the screen during play, the NEXT button will change to the next menu. PREV SKIP NEXT 2 PLAY/REPEAT SELECT If “PREV” or “ ” appears on the screen during play, pressing the PREV button will restore the previous menu. A screen menu appears. * Some discs show several short movies sequentially instead of a menu. PREV SKIP NEXT 3 Select the number of item you want to play. +10 1 2 3 4 5 6 7 8 9 0 6 Ifbutton the play has finished, press the STOP/RETURN once or more to return to a previous mode. STOP RETURN * If the disc shows several short movies sequentially, press the PLAY/REPEAT button when a desired picture appears. PLAY/REPEAT SELECT To select a number higher than 9 in step 3 Example) • To select number 15 Press “+10” and “5” in succession. • To select number 26 Press “+10” twice, then press “6”. 19 To stop play To return to a previous screen mode during play STOP RETURN STOP RETURN Press and hold for more than 2 seconds. Press once. * To return to the first screen mode, press the STOP/RETURN button repeatedly until the first screen mode appears. If the disc has index numbers Pressing the INDEX or button once or more searches for and select any index number. Play starts from the point of selected index number. To play a Video CD (ver. 2.0) without Playback Control operation Press and hold the STOP/RETURN button for more than 2 seconds when this unit is stopped. “PBC” disappears from the display, and this unit turns into a normal play mode. STOP INDEX RETURN To restore the Playback Control mode again, press and hold the STOP/RETURN button for more than 2 seconds. Note When you press the DISC SKIP button or a numeric button to select a desired track in the Playback Control mode, the unit cancels the mode and starts playing the selected track. 20 Battery installation English NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Remote control transmitter operation range 1 3 Remote control sensor 2 Within approximately 6 m (19.7 feet) Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement. ● Be sure polarities are correct. (See illustration inside battery compartment.) ● Remove batteries if remote control transmitter will not be used for an extended period of time. ● If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. 30° 30° Notes ● There should be no large obstacles between the remote control transmitter and the main unit. ● If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter to not work correctly. In this case, reposition the main unit to avoid direct lighting. HANDLING COMPACT DISCS • To remove a disc from its storage case, open the case and then press down at the center; with a finger through the center hole and the outer edges held as shown in the illustration, lift the disc out carefully. • Discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center. ,,, , , • • Always handle the disc with care so that its surface is not scratched. Discs are not subjected to wear during play, but disc surface damage when the disc is being handled can adversely affect the disc’s play. • Do not try to clean the disc’s surface by using any type of disc cleaner, record spray, anti-static spray or liquid, or any other chemical-based liquid, because such substances might irreparably damage the disc’s surface. • Do not expose discs to direct sunlight, high temperature or high humidity for a long period of time, because these might warp or otherwise damage the disc. No! To play a 8-cm (3-inch) CD Place it in the inner recessed area of the disc tray. Do not put a normal (12-cm/5-inch) CD on top of a 8-cm CD. 21 TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM PROBABLE CAUSE REMEDY This unit does not switch ON when the POWER switch is pressed. The power cord is not connected or not completely connected. Securely connect the power cord. It happens that this unit does not work normally. There is an influence of strong external noise (lightning, excessive static electricity, etc.) or a misoperation on this unit while using this unit. Turn the power to this unit off and disconnect the AC power cord from the AC outlet. After about 30 seconds have passed, connect the power and operate this unit again. The disc tray does not close completely. A foreign object is obstructing the tray. Carefully check the disc tray and remove the foreign object. Play does not begin. The disc is damaged. Check the disc carefully; replace it if necessary. There is moisture on the laser pickup. Wait 20 to 30 minutes after switching the unit ON before trying to play a disc. The disc has been loaded upside down. Reload the disc with the label side up. The disc is dirty. Clean the disc. Play is delayed, or begins at the wrong place. The disc may be scratched or damaged. Check the disc carefully; replace it if necessary. A disc cannot be played normally, or there is a noise during play. A nonstandardized disc is played. Play another disc. No sound or no picture. Improper output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. Improper amplifier operation. Set the amplifier controls to the correct input selection. No picture. The setting of the VIDEO OUT MODE SELECT switch is improper. Set the VIDEO OUT MODE SELECT switch to another proper position. Sound and picture “skip”. This unit is being subjected to vibrations or impacts. Relocate this unit. The disc is dirty. Clean the disc. Sound “hums”. Improper cable connections. Securely connect the audio cables. If the problem persists, the cables may be defective. Noise from a nearby tuner. The tuner is too close to this unit. Move the tuner and this unit farther apart. Noise from inside of the disc tray. The disc may be warped. Replace the disc. The remote control transmitter does not work. The batteries of this remote control transmitter are too weak. Replace the batteries with new ones. Direct sunlight or lighting (of an inverter type of fluorescent lamp etc.) is striking the remote control sensor of the main unit. Change position of the main unit. SPECIFICATIONS Audio (analog) output level (only when playing CD) 1 kHz, 0 dB................................................................ 2 ± 0.5V Signal to noise ratio (only when playing CD) ........................................................................ 100 dB or more Dynamic range (only when playing CD) .......................................................................... 96 dB or more Harmonic distortion + noise 1 kHz ............................................................. 0.0035% or less Frequency response 2 Hz–20 kHz ............................................................... ±0.5 dB Video output 75Ω, Negative sync. .............................................. 1 terminal Video output level ........................................................ 1 Vp-p Mic input ....................................................................... 2 jacks Signal processing KEY CONTROL, ECHO ................................................ Digital Power requirements China model ................................................. AC 220V, 50 Hz Singapore model.......................................... AC 230V, 50 Hz General model.................... AC 110/120/220/240V, 50/60 Hz Power consumption ........................................................ 25W Dimensions (W x H x D) ......................... 435 x 116 x 403 mm Weight ............................................................................... 6 kg Accessories ................................... Audio connection cord x 1 Video connection cord x 1 Remote control transmitter Batteries (size AA, R6, UM-3) Please note that all specifications are subject to change without notice. 22 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA VZ12510
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Yamaha VCD-120K Manual de usuario

Categoría
Reproductores de CD
Tipo
Manual de usuario
Este manual también es adecuado para