Transcripción de documentos

VCD-100K NATURAL SOUND VIDEO-CD CHANGER NATURAL SOUND VIDEO CD CHANGER VCD I00K PLAYXCHANGE OPEN/CLOSE 5–Disc Carousel STOP/RETURN VIDEO CD Digital Echo / 11 Step Key Control MPX KARAOKE PLAY/SELECT Version 2.0 / Interactive Operation KEY CONTROL DISC SKIP SKIP/SEARCH PREV NEXT POWER ECHO LEVEL MIC LEVEL MIC 1 MIC 2 KEY CONTROL ENTER 1 2 3 4 5 6 7 8 9 0 MIN MAX MIN MAX OWNER’S MANUAL  Thank you for selecting this YAMAHA Video-CD changer. This unit can play discs of the following types only. Type of disc Mark printed on the disc Type of signal recorded Video-CD Sound + Picture (Movie) Compact disc Sound only Size (Dimension) Maximum possible play time 12 cm 74 minutes 8 cm (Single type) 20 minutes 12 cm 74 minutes 8 cm (Single type) 20 minutes Never attempt to load a disc other than above into the unit because it may cause a damage to this unit and/or other units connected to this unit. VIDEO-CD Video-CDs are classified into two types, version 1.1 and 2.0. This unit can play not only discs of version 1.1, but also version 2.0 on which a Playback Control can be made. Video-CD, version 1.1: With the same operation as compact discs, you can enjoy sounds and pictures (movies). Video-CD, version 2.0: In addition to a normal play which is the same as discs of version 1.1, you can make a Playback Control. (For details on Playback Control, refer to page 16.) FEATURES ● 5-Disc Carousel Auto-Changer (for Playing Video-CDs and Compact Discs) ● Audio Output Mode Selector (MPX) Button for Karaoke ● Full Opening Disc Tray for Changing 5 Discs at a Time ● 11 Step Key Level Control Buttons ● PLAYXCHANGE; Disc Changing Capability while Playing Another ● Video Output Format Selector (VIDEO OUT MODE SELECT) Switch ● Random Access Programmable Play ● Two MIC Jacks and a Mini-Jack for Connecting with a Key Control Function of a Microphone ● Playback Control Function Available for Video-CDs, Version 2.0 ● Automatic Pause Inserting Function for Karaoke (Karaoke Mode) ● Mic Level and Echo Level Controls ● Remote Control Capability CONTENTS Caution ............................................................3 Connections ....................................................4 Controls and Their Functions ..........................6 Basic Operations .............................................9 Pre-Programming Selections (for Singing Karaoke) ........................................................13 Playback Control of Video-CD (Ver. 2.0) ......................................................................16 Notes about the Remote Control Transmitter ......................................................................19 Handling Compact Discs ...............................19 Troubleshooting .............................................20 Specifications ................................................20 2  1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to rain or water. WARNING To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. 3 Do not operate the unit upside-down. It may overheat, possibly causing damage. 4 Never open the cabinet. If a foreign object drops into the unit, contact your dealer. DANGER Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 5 This player should not be placed on appliances, such as amplifiers, that produce heat, or placed in a cabinet that impedes the flow or air. This may result in a failure in this player. Install the player in a well ventilated place. In addition, do not place objects on the player. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 6 Do not use force on switches, knobs or cords. When moving the set, first turn the unit off. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself. 7 Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 8 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that your unit is faulty. 9 English CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CLASS 1 LASER PRODUCT This compact disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located on the rear exterior. (China model only) Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. To prevent lightning damage, unplug the power cord and remove the antenna cable during electrical storms. 10 The generated digital signals may interfere with other equipment such as tuners or receivers. Move the system farther away from such equipment if interference is observed. 11 Voltage selector (General model only) The voltage selector (on the rear panel of this unit) must be correctly set to the voltage used locally before making any connection to the AC power supply. The unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the unit itself is turned off. NOTE: Please check the copyright laws in your country before recording from records, compact discs, radio, etc. Recording of copyrighted material may infringe copyright laws. CAUTION As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. Laser Diode Properties • Material: GaAlAs • Wavelength: 780nm • Emission Duration: continuous • Laser Output: max. 44.6µW* * This output is the value measured at a distance of about 200mm from the objective lens surface on the Optical Pickup Block. CAUTION FOR CARRYING THIS UNIT Be sure not to carry or tip the unit with discs remaining in it. CAUTION FOR MOVING THIS UNIT When moving this unit, first remove all discs from the disc tray and close the tray by pressing the OPEN/CLOSE button, and then switch off the power after you confirm that the display indicates as follows. DISC MUSIC Never switch off the power if the display is not pictured as above, otherwise the unit will break down during moving because the internal mechanism is not locked. 3  CONNECTIONS ● ● Before making any connections, switch OFF the power to this unit, the amplifier, the video monitor, etc. Connections should be made to the correct input terminals of the amplifier, the video monitor, etc. ● If the placement of this unit causes interference to other equipment, separate them from each other. Video monitor Video monitor VIDEO IN VIDEO IN Video connection cord (included) This unit VIDEO OUT LINE OUT 1 1 MODE SELECT 2 L AUTO 2 PAL NTSC R To AC outlet Amplifier CD Amplifier Audio connection cord (included) CD Connecting to the amplifier Connecting to the video monitor This unit is equipped with 2 sets of LINE OUT terminals to allow you to connect one or two amplifiers to this unit. This unit is equipped with 2 VIDEO OUT terminals to allow you to connect one or two video monitors to this unit. Connect the LINE OUT terminals to the audio input terminals of the amplifier (marked as “CD”, “AUX”, etc.) by using the included audio connection cord. Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier. Connect this unit’s VIDEO OUT terminal to the video input terminal of the video monitor by using the included video connection cord. 4 * This product includes one audio connection cord and one video connection cord.  English Setting the VIDEO OUT MODE SELECT switch This unit is designed for use with the NTSC and PAL television formats. Set this switch to the position suitable for the use of this unit you plan. PAL: VIDEO OUT Outputs signals in the PAL format no matter which format (PAL or NTSC) the currently playing disc employs. Set to this position if your video monitor employs the PAL format. 1 MODE SELECT AUTO AUTO: Outputs signals in the same format as the currently playing disc employs. Set to this position if your video monitor can be switched in between the PAL and NTSC formats automatically. 2 PAL NTSC NTSC: Outputs signals in the NTSC format no matter which format (PAL or NTSC) the currently playing disc employs. Set to this position if your video monitor employs the NTSC format. Connecting microphones for singing Karaoke One or two microphones can be connected to this unit. Moreover, if you have a Yamaha microphone which has a key control function, connect the mini-plug connector cable of the microphone to the KEY CONTROL jack of this unit. This connection allows you to change key of source sound by using controls on the microphone. Microphone PLAYXCHANGE STOP/RETURN VIDEO CD Microphone (with a key control function) OPEN/CLOSE PLAY/SELECT Version 2.0 / Interactive Operation DISC SKIP SKIP/SEARCH PREV NEXT ECHO LEVEL MIC LEVEL MIC 1 MIC 2 KEY CONTROL 6 7 8 9 0 MIN MAX MIN MAX 5  CONTROLS AND THEIR FUNCTIONS FRONT PANEL 1 23 4 5 6 78 90 NATURAL SOUND VIDEO CD CHANGER VCD I00K PLAYXCHANGE OPEN/CLOSE 5–Disc Carousel STOP/RETURN VIDEO CD Digital Echo / 11 Step Key Control MPX KARAOKE PLAY/SELECT Version 2.0 / Interactive Operation KEY CONTROL DISC SKIP SKIP/SEARCH PREV NEXT POWER ECHO LEVEL MIC LEVEL MIC 1 MIC 2 KEY CONTROL ENTER 1 2 3 5 4 6 7 8 9 0 MIN A B C D E F REMOTE CONTROL TRANSMITTER 2 9 3 E J 6 PROG OPEN/CLOSE KARAOKE MPX CANCEL ENTER 1 2 3 4 5 6 7 8 9 DISC SKIP PREV SKIP NEXT SEARCH KEY CONTROL STOP RETURN 7 6 PLAY/REPEAT SELECT K L D 0 INDEX MAX 5 4 0 MIN MAX G H I  English 1 Disc tray Up to 5 discs can be loaded on the disc tray. Five disc-setting positions on the disc tray are numbered from 1 to 5. 9 OPEN/CLOSE button 2 MPX button Pressing this button starts a disc play. If this button is pressed while playing a disc, play will restart from the begining of the track currently playing. When this unit is in a Playback Control mode, pressing this button selects a screen menu mode. Whenever this button is pressed, audio output mode changes. The currently selected audio output mode is shown on the display. (Refer to page 12 for details.) 3 KARAOKE button When this button is pressed so that “KARAOKE” lights up on the display, a pause is inserted each time a play of track ends. Pressing this button once more will cancel this function. 4 KEY CONTROL buttons These buttons are available when a microphone is connected to this unit. Pressing these buttons changes key of the track currently playing. The current key level is shown on the display. Opens and closes the disc tray. 0 PLAY/SELECT (PLAY/REPEAT) button A POWER switch Press this switch to switch the power on. Press it again to switch the power off. B Remote control sensor Receives signals from the remote control transmitter. C Display panel See page 8. : Whenever pressed, key of the track becomes lower. : Pressing this button restores the original key level of the track. : Whenever pressed, key of the track becomes higher. D ENTER button Used for programming tracks. (Refer to page 13 for details.) E Numeric buttons 5 DISC SKIP button(s) Used to select a track number. Whenever this button is pressed, the disc tray rotates and the selected disc changes. Pressing the side rotates the disc tray clockwise and pressing the side rotates the disc tray counterclockwise. F ECHO LEVEL control 6 SKIP/SEARCH (PREV and NEXT) buttons SKIP: Pressing this button locates the begining of the next track (or the currently playing track or the previous track). SEARCH: Pressing and holding this button advances (or reverses) the play rapidly. PREV and NEXT: Functions only when a Playback Control operation is made on a Video-CD, version 2.0. Pressing the NEXT side selects the next display mode, and pressing the PREV side restores the previous display mode. * For some discs, this key operation will not function. 7 STOP/RETURN button Stops playing a disc during a normal disc play. During a Playback Control operation, press this button to return to a previous screen menu mode. When playing a Video-CD, pressing this button calls a Playback Control mode. 8 PLAYXCHANGE button Press this button to open and close the disc tray while playing a disc. This is usefull when you want to exchange discs while playing another disc. This control adjusts the level of echo applied to sound signals input from the microphone(s) connected to this unit’s MIC jacks. G MIC LEVEL control This control adjusts the level of sound signals input from the microphone(s) connected to this unit’s MIC jacks. H MIC (1 and 2) jacks One or two microphones can be connected to these jacks. I KEY CONTROL jack If you have a Yamaha microphone which has a key control function, connect the mini-plug connector cable of the microphone to this jack. This connection allows you to change key of source sound by using controls on the microphone. J INDEX buttons If the selected disc has index numbers, by pressing the button once or more, you can select a desired index number and play the disc from that point. or K PROG button This button is available only when “KARAOKE” is illuminated on the display. This button is used for programming tracks. (Refer to page 13 for details.) L CANCEL button Used to cancel a programmed track or all program data. (Refer to page 14–15 for details.) 7  DISPLAY PANEL 1 2 3 4 KARAOKE VIDEO CD PBC PROG AUTO NTSC PAL 8 DISC 5 6 MUSIC 9 L R 7 VC 0 1 VIDEO CD indicator Lights up when the selected disc is a Video-CD. 7 Time display 2 KARAOKE indicator Lights up when the KARAOKE function is turned on by pressing the KARAOKE button, and goes off if the KARAOKE button is pressed once more. 8 PBC (Playback Control) indicator Shows elapsed time of the track currently playing, program number and so on. Lights up when this unit is in a Playback Control mode for playing a Video-CD, version 2.0. 3 PROG indicator Lights up when this unit is in the program play mode. 9 Video signal output mode indicators 4 Disc number indicator (DISC) Shows the disc number of selected disc. 0 Key level indicator 5 Track number indicator (MUSIC) Shows the selected track number. 6 Audio output mode indicators The current audio output mode selected by pressing the MPX button is shown by these indicators. (Refer to page 12 for details.) 8 Show the current position of the VIDEO OUT MODE SELECT switch on the rear panel and the format of video output signal. Shows the key level of the source currently playing in 11 steps. : Lights up when the current key level is lower than the original level of the track. : Lights up when the current key level is the original level of the track. : Lights up when the current key level is higher than the original level of the track.  English This manual mainly describes how to operate this unit by using the remote control transmitter. To operate this unit from the front panel, use the same named buttons on the front panel. BASIC OPERATIONS Loading discs and starting disc play 2, 3 PROG OPEN/ CLOSE KARAOKE NATURAL SOUND VIDEO CD CHANGER VCD I00K 5–Disc Carouse MPX CANCEL ENTER 1 2 3 4 5 6 7 8 9 Digital Echo / 11 Step Key C 0 MPX KARAOKE 1 POWER ENTER 1 DISC SKIP PREV SKIP NEXT SEARCH KEY CONTROL STOP/ RETURN 1 Turn the power on. INDEX 2 STOP RETURN PLAY/REPEAT SELECT 4 4 Start a disc play. POWER PLAY/REPEAT SELECT 2 Open the disc tray and load discs. Play will begin from the first track of Disc 1 automatically. * If you want to play a desired track on another disc, see the next page. OPEN/ CLOSE To stop play Label side upward. STOP RETURN Disc tray This unit stops at the begining of the first track on the disc. 3 Close the disc tray. OPEN/CLOSE Exchanging discs while playing another disc During play, you can open the disc tray by pressing the PLAYXCHANGE button without interrupting disc play. In this case, pressing the DISC SKIP button has no effect. Note If the STOP/RETURN button is not pressed (except when “KARAOKE” is illuminated on the display), play will not stop until the last track on the last-numbered disc has been played. Note Additionally, you can close the disc tray by the following ways. If the tray is closed by these ways, play will begin automatically. ● ● ● Press the PLAY/SELECT button. (Play will begin from the first track of Disc 1.) Press a numeric button, and then press the PLAY/SELECT button or the ENTER button. Press the front edge of the disc tray gently. (Play will begin from the first track of Disc 1.) 9  To play a desired track PROG OPEN/ CLOSE KARAOKE 2 STOP/ RETURN MPX CANCEL ENTER 1 2 3 4 5 6 7 8 9 3 0 INDEX DISC SKIP PREV SKIP NEXT SEARCH 1 KEY CONTROL STOP RETURN PLAY/REPEAT SELECT 3 Selecting a track (by using the numeric buttons) 1 If necessary, select a desired disc. DISC SKIP For example: To select track 5 Press “5”. * If you want to play from the first track on the disc, press the PLAY/REPEAT button. 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 INDEX ENTER 0 DISC SKIP To select track 20 Press “2”, then press “0”. 2 Select a desired track number. 1 To select track 12 Press “1”, then press “2”. 1 Note If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played. 0 3 Start play. PLAY/ REPEAT ENTER SELECT or Display information ➀ DISC ➁ ➂ MUSIC VIDEO CD AUTO NTSC PAL ➀ ➁ ➂ 10 Shows the tray number of the selected disc. Shows the selected track number. Shows the elapsed time of the selected track. Note If a Video-CD, version 2.0 is selected, “PBC” lights up on the display. In this mode, disc play is controlled by the rule of Playback Control. (For details of Playback Control, refer to page 16–18.) To cancel this mode and restore the normal play mode, press and hold the STOP/RETURN button for more than 2 seconds. “PBC” disappears from the display. To call the Playback Control mode again, press and hold the STOP/RETURN button for more than 2 seconds.  To advance or reverse play rapidly (Manual search) To advance rapidly PLAY/REPEAT SEARCH SELECT (press and hold) To reverse rapidly SEARCH To skip to the beginning of a desired track (press and hold) • ● To play from the beginning of the track following the one currently playing PREV SKIP NEXT • • ● To play from the beginning of the track currently playing The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. Manual search can also be performed while disc play is paused, though no sound will be heard. When using the SKIP/SEARCH button on the front panel: Be careful not to release the button just after it is pressed, otherwise the play is skipped to the beginning of the next track or returned to the beginning of the current track. PREV SKIP NEXT To enter the KARAOKE mode ● To play from the beginning of the track before the one currently playing KARAOKE KARAOKE PREV SKIP NEXT (twice) Notes • These operations can also be performed when the unit is in the pause or stop mode. • When using the SKIP buttons on the remote control transmitter: If a button is pressed and held, the track number is continuously changed to higher numbers (or lower numbers). When using the SKIP/SEARCH button on the front panel: Be careful not to press and hold the button, otherwise the selected track is played forward (or backward) rapidly. • • • A pause is inserted each time a play of track ends. To begin playing the next track, press the PLAY/REPEAT button. While this unit is paused, “ : ” flashes on and off on the time display. In this mode, you can program tracks for singing Karaoke. See page 13–15 for details. Some adjustments can be made on this unit for enjoying Karaoke. See the next page for details. Notes If “PBC” is illuminated on the display, pressing the KARAOKE button to enter the Karaoke mode will cancel the Playback Control mode (turn “PBC” off) and stop this unit. • If the pause mode is engaged for 10 minutes, the unit is stopped automatically to protect the internal mechanism. • To cancel this function Press the KARAOKE button again. “KARAOKE” disappears from the display. * If a Video-CD, version 2.0 is selected at this time, “PBC” lights up on the display and this unit stops. 11 English To replay from the beginning of the track currently playing  Adjustments for enjoying Karaoke PROG OPEN/ CLOSE KARAOKE MPX CANCEL ENTER MPX 1 2 3 4 5 6 7 8 9 PLAYXCHANGE STOP/RETURN VIDEO CD Digital Echo / 11 Step Key Control PLAY/SELECT Version 2.0 / Interactive Operation 0 MPX KARAOKE INDEX DISC SKIP PREV SKIP NEXT SEARCH KEY CONTROL DISC SKIP SKIP/SEARCH PREV NEXT ECHO LEVEL MIC LEVEL MIC 1 MIC 2 KEY CONTROL ENTER KEY CONTROL OPEN/CLOSE 5–Disc Carousel 1 2 3 4 5 6 7 8 9 0 MIN MAX MIN MAX KEY CONTROL STOP RETURN PLAY/REPEAT SELECT Adjusting the level of sound signals input from the microphone(s) MIC LEVEL MPX KEY CONTROL ECHO LEVEL MIC LEVEL Adjusting the level of echo applied to sound signals input from the microphone(s) ECHO LEVEL MIN MAX Turning the MIC LEVEL control clockwise increases the level, and counterclockwise decreases the level. Changing audio output mode You can select any of four audio output modes by pressing the MPX button. MPX Display indication Audio output mode Normal stereo output L 12 R L Sound from the left channel only is output from both the left and right speakers. R Sound from the right channel only is output from both the left and right speakers. VC Sound of vocals on the source is attenuated. * There may be a case that vocals cannot be attenuated effectively according to a source. MIN MAX Turning the ECHO LEVEL control clockwise increases the level, and counterclockwise decreases the level. If you need no echo effect, set this control to the “MIN” position. Adjusting key of the track currently playing Pressing the KEY CONTROL buttons change key of the track currently playing. The current key level is shown on the display. Whenever a track changes, its original key level is restored. KEY CONTROL : Whenever pressed, key of the track becomes lower in 5 steps. : Pressing this button restores the original key level of the track. : Whenever pressed, key of the track becomes higher in 5 steps.  English PRE-PROGRAMMING SELECTIONS (FOR SINGING KARAOKE) ● ● 3 9 6 PROG OPEN/ CLOSE 2 KARAOKE 5 MPX CANCEL ENTER 1 2 3 4 5 6 7 8 9 Programming is possible either while the unit is playing a disc or stopped. As many as 10 selections can be stored at one time. PLAYXCHANGE STOP/RETURN VIDEO CD 0 OPEN/CLOSE PLAY/SELECT Version 2.0 / Interactive Operation INDEX 4 DISC SKIP PREV SKIP NEXT SEARCH DISC SKIP SKIP/SEARCH PREV NEXT ECHO LEVEL MIC 1 MIC 2 KEY CONTROL 6 7 8 9 0 MIN 9 MIC LEVEL MAX MIN MAX KEY CONTROL STOP PLAY/REPEAT RETURN 7 SELECT 1 Load discs on the disc tray. 2 Press the KARAOKE button so that “KARAOKE” lights up on the display. To cancel it, press the KARAOKE 9 6 ENTER button once again. 7 To start play, press the PLAY/REPEAT button. KARAOKE KARAOKE PLAY/ REPEAT SELECT 3 Flashes. PROG DISC MUSIC L R * This unit pauses whenever a play of track ends. To start playing the next track, press the PLAY/REPEAT button. 8 Repeat step 3–6 to program more selections. 4 Select the disc (before “DISC” and “MUSIC” stop flashing on the display). DISC SKIP 9 Ifthenecessary, change the audio output mode by pressing MPX button. Use the KEY CONTROL buttons and the MIC LEVEL and ECHO LEVEL controls as you prefer. (See page 12 for details.) 5 Select the track (before “DISC” and “MUSIC” stop flashing on the display). 1 2 3 4 5 6 7 8 9 0 Notes ● In step 4 or 5, if “DISC” and “MUSIC” stop flashing on the display before you finish programming a track, press the PROG button again. ● If you program a track number which is higher than the highest track number on the disc, “E rr” appears on the display and it cannot be programmed. ● This unit can store as many as 10 selections at one time. If you program a track number as the eleventh program, “E rr” appears on the display and no more program can be made. 13  Display information during programming KARAOKE VIDEO CD PROG AUTO DISC MUSIC L ➀ ➁ R Shows the program number for the track to be programmed next. Shows the selected disc and track number. ➀ KARAOKE VIDEO CD PROG AUTO DISC MUSIC L R ➁ PROG OPEN/ CLOSE KARAOKE MPX CANCEL ENTER 1 2 3 4 5 6 7 8 9 1, 3 ENTER Numeric buttons 2 0 INDEX DISC SKIP PREV SKIP NEXT SEARCH DISC SKIP KEY CONTROL STOP RETURN PLAY/REPEAT SELECT To check program data 1 CANCEL 3 When the check is completed; CANCEL The disc number, the track number and the program number of the last selection will flash on the display. 2 PREV SKIP NEXT Each time the SKIP button is pressed, the disc numbers, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. 14 To correct the selection currently playing There are two methods, as described below. 1) Select the track to replace the one currently playing by using the DISC SKIP button and the numeric buttons, then press the ENTER button. 2) Select the track to replace the one currently playing by using the DISC SKIP button and the SKIP buttons.  English PROG OPEN/ CLOSE KARAOKE 2 MPX CANCEL ENTER 1 2 3 4 5 6 7 8 9 1 3 0 INDEX DISC SKIP PREV SKIP NEXT SEARCH KEY CONTROL STOP RETURN To cancel a programmed selection 1 CANCEL The disc number and the track number of the last selection will flash on the display. 2 PLAY/REPEAT SELECT To cancel the selection you are currently programming There are two methods, as described below. 1) Press the CANCEL button instead of the ENTER button after the track number is selected. 2) If about 30 seconds pass with no operation after the track number is selected, the track will not be programmed. To cancel all program data Switch off the power. PREV SKIP NEXT Display the disc number and the track number to be canceled. 3 ENTER Press once while the number is flashing. Notes ● The SEARCH buttons can be used during play to search all tracks including tracks not programmed. ● When programs consist of tracks from more than one disc, if you change a disc by using the PLAYXCHANGE button, the programmed track on the removed disc is replaced by the same numbered track on the new disc. If the same number of the programmed track does not exist on the new disc, the program will substitute the highestnumbered track on the new disc. EXAMPLE: Program Disc 1, Track 5 Disc 2, Track 8 Disc 4, Track 12 Swap disc 4 (new disc has 9 tracks only) Disc 1, Track 5 Disc 2, Track 8 Disc 4, Track 9 15  PLAYBACK CONTROL OF VIDEO-CD (Ver. 2.0) Playback Control provides you with two types of new playback enjoyment. This function is available for Video-CDs, version 2.0 only. “PBC” will light up on the display when a version 2.0 disc is used. The Playback Control differs with each disc. This section gives a basic explanation of Playback Control. Refer to the instruction manual for the disc for details. Playback selection on a screen menu You can select pictures, music and information to play back by selecting items on a screen menu. (Similar to having a conversation.) Playback of high quality pictures You can enjoy watching pictures which are four times higher in quality than moving pictures. A Flowchart of Playback Control (as an example) Mode just after the disc is selected RETURN 1 Movie Screen menu RETURN RETURN 2 Picture 3 RETURN Screen menu RETURN 2 1 NEXT Movie Movie Picture Picture Movie Movie Picture Picture 1 2 3 4 Picture Picture Picture Picture Picture Picture Picture Picture Playback ends. 16 PREV  English Basic operation Note Disc play in the Playback Control mode depends on the data of the disc used. So, according to the contents of disc, the following operating method may not be applied to the disc. Be sure to refer to the instruction manual for the disc. Before operation If “KARAOKE” is illuminated on the display, press the KARAOKE button to cancel it. (When “KARAOKE” is illuminated, a Playback Control operation cannot be made.) PROG OPEN/ CLOSE KARAOKE 3 5 MPX CANCEL ENTER 1 2 3 4 5 6 7 8 9 0 INDEX DISC SKIP PREV SKIP NEXT SEARCH 1 KEY CONTROL 6 1 Stop this unit and select a Video-CD (version. 2.0). STOP RETURN PLAY/REPEAT 2, 3 SELECT 4 Play starts, or another menu appears. If another menu appears, repeat step 3. (Some discs have more than one screen menu.) DISC SKIP 5 Ifpressing “NEXT” or “ ” appears on the screen during play, the NEXT button will change to the next menu. PREV SKIP NEXT 2 PLAY/REPEAT SELECT A screen menu appears. * Some discs show several short movies sequentially instead of a menu. If “PREV” or “ ” appears on the screen during play, pressing the PREV button will restore the previous menu. PREV SKIP NEXT 3 Select the number of item you want to play. 1 2 3 4 5 6 7 8 9 6 Ifbutton the play has finished, press the STOP/RETURN once or more to return to a previous mode. STOP 0 RETURN * If the disc shows several short movies sequentially, press the PLAY/REPEAT button when a desired picture appears. PLAY/REPEAT SELECT To select a number higher than 9 in step 3 Example) • To select number 15 Press “0”, “1” and “5” in succession. • To select number 20 Press “0”, “2” and “0” in succession. 17  To stop play To return to a previous screen mode during play STOP RETURN STOP RETURN Press and hold for more than 2 seconds. Press once. * To return to the first screen mode, press the STOP/RETURN button repeatedly until the first screen mode appears. If the disc has index numbers Pressing the INDEX or button once or more searches for and select any index number. Play starts from the point of selected index number. To play a Video-CD (ver. 2.0) without Playback Control operation Press and hold the STOP/RETURN button for more than 2 seconds when this unit is stopped. “PBC” disappears from the display, and this unit turns into a normal play mode. STOP INDEX RETURN To restore the Playback Control mode again, press and hold the STOP/RETURN button for more than 2 seconds. 18  Battery installation English NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Remote control transmitter operation range 1 3 Remote control sensor 2 Within approximately 7m (23 feet) Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement. ● Be sure polarities are correct. (See illustration inside battery compartment.) ● Remove batteries if remote control transmitter will not be used for an extended period of time. ● If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. 30° 30° Notes ● There should be no large obstacles between the remote control transmitter and the main unit. ● If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter to not work correctly. In this case, reposition the main unit to avoid direct lighting. HANDLING COMPACT DISCS • To remove a disc from its storage case, open the case and then press down at the center; with a finger through the center hole and the outer edges held as shown in the illustration, lift the disc out carefully. • Discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center. ,,, , , • • Always handle the disc with care so that its surface is not scratched. Discs are not subjected to wear during play, but disc surface damage when the disc is being handled can adversely affect the disc’s play. • Do not try to clean the disc’s surface by using any type of disc cleaner, record spray, anti-static spray or liquid, or any other chemical-based liquid, because such substances might irreparably damage the disc’s surface. • Do not expose discs to direct sunlight, high temperature or high humidity for a long period of time, because these might warp or otherwise damage the disc. No! To play a 8-cm (3-inch) CD Place it in the inner recessed area of the disc tray. Do not put a normal (12-cm/5-inch) CD on top of a 8-cm CD. 19  TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM REMEDY PROBABLE CAUSE This unit does not switch ON when the POWER switch is pressed. The power cord is not connected or not completely connected. Securely connect the power cord. The disc tray does not close completely. A foreign object is obstructing the tray. Carefully check the disc tray and remove the foreign object. Play does not begin. The disc is damaged. Check the disc carefully; replace it if necessary. There is moisture on the laser pickup. Wait 20 to 30 minutes after switching the unit ON before trying to play a disc. The disc has been loaded upside down. Reload the disc with the label side up. The disc is dirty. Clean the disc. Play is delayed, or begins at the wrong place. The disc may be scratched or damaged. Check the disc carefully; replace it if necessary. A disc cannot be played normally, or there is a noise during play. A nonstandardized disc is played. Play another disc. No sound or no picture. Improper output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. Improper amplifier operation. Set the amplifier controls to the correct input selection. No picture. The setting of the VIDEO OUT MODE SELECT switch is improper. Set the VIDEO OUT MODE SELECT switch to another proper position. Sound and picture “skip”. This unit is being subjected to vibrations or impacts. Relocate this unit. The disc is dirty. Clean the disc. Sound “hums”. Improper cable connections. Securely connect the audio cables. If the problem persists, the cables may be defective. Noise from a nearby tuner. The tuner is too close to this unit. Move the tuner and this unit farther apart. Noise from inside of the disc tray. The disc may be warped. Replace the disc. The remote control transmitter does not work. The batteries of this remote control transmitter are too weak. Replace the batteries with new ones. Direct sunlight or lighting (of an inverter type of flourescent lamp etc.) is striking the remote control sensor of the main unit. Change position of the main unit. SPECIFICATIONS Audio (analog) output .............................. 2 pairs of terminals Audio (analog) output level 1 kHz, 0 dB................................................................ 2 ± 0.5V Video output 75Ω, Negative sync. ............................................ 2 terminals Video output level ........................................................ 1 Vp-p Mic input ....................................................................... 2 jacks Signal processing KEY CONTROL, ECHO ................................................ Digital 20 Power requirements China model ................................................. AC 220V, 50 Hz Singapore model.......................................... AC 230V, 50 Hz General model.................... AC 110/120/220/240V, 50/60 Hz Power consumption ........................................................ 25W Dimensions (W x H x D) ......................... 435 x 106 x 388 mm Weight ............................................................................ 6.5 kg Accessories ................................... Audio connection cord x 1 Video connection cord x 1 Remote control transmitter Batteries (size AA, R6, UM-3) Please note that all specifications are subject to change without notice.  YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA VV00810