Steren INTV-060 El manual del propietario

Tipo
El manual del propietario
INTV-060
1018m
V0.1
ADAPTADOR WI-FI
DE CELULAR A TV
IMPORTANTE
Antes de utilizar el producto, lee cuidadosamente este instructivo para evitar
cualquier mal funcionamiento.
La información presentada sirve únicamente como referencia sobre el
producto. Debido a actualizaciones pueden existir diferencias.
Por favor, consulta nuestra página web www.steren.com para obtener la
versión más reciente de este manual.
Una vez realizadas las conexiones, aparecerá la pantalla de configuración; en
caso de que esto no suceda, selecciona en tu TV la entrada HDMI en la que
está conectado el adaptador.
Si tu dispositivo Android estaba previamente conectado a una red Wi-Fi,
podrás navegar en internet y visualizar todo en la pantalla.
Presiona el botón en el adaptador para seleccionar el
sistema operativo del dispositivo que deseas vincular.
En caso de seleccionar Android, pasa directamente
a la instrucción 3.
CONECTA EL ADAPTADOR A LA TV
VINCULA TU DISPOSITIVO PARA
VISUALIZAR EN MODO ESPEJO
PRECAUCIONES
• Este aparato no se destina para utilizarse por personas (incluyendo niños),
cuyas capacidades físicas, sensoriales o mentales sean diferentes o estén
reducidas, o carezcan de experiencia o conocimiento.
• Los niños deben supervisarse para asegurar que no empleen el aparato como
juguete.
• No se utilice ni almacene en ambientes con agua o humedad.
• Cualquier reparación no autorizada puede ocasionar mal funcionamiento y
anulará la garantía.
Alimentación mínima 5 V - - - 1 A
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible
que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o
dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.
HDMI
Puerto
HDMI
Puerto USB
Nombre de identificación Contraseña
Adaptador USB
Elige
iOS
Android
1
Consulta el manual de tu dispositivo para saber si cuenta con tecnología para proyectar
en modo espejo (“Screen Mirroring”, “proyectar pantalla”, “duplicar pantalla”, etc.).
*Las imágenes se muestran como referencia. La ubicación de las opciones de transmisión
de pantalla puede variar según el sistema operativo y el modelo del dispositivo utilizado
En caso de que no se pueda establecer la conexión,
mantén presionado el botón del adaptador durante
aproximadamente 10 segundos para reiniciarlo.
Luego repite el procedimiento para vincular el
dispositivo.
Si la conexión es exitosa, los iconos en la pantalla
de configuración de la TV aparecerán como se
muestra en la imagen.
Ingresa a las opciones de Wi-Fi en tu dispositivo y, en la lista de redes
disponibles, selecciona el nombre de identificación del adaptador. Luego
introduce la contraseña.
Alimentación: 5 V - - - 1 A
Chipset: AM8258
Memoria RAM: DDR3 128 MB
Nand flash: 128 MB
Wi-Fi: 802.11 b/g/n
Resolución: Hasta 1 080p
Temperatura de operación: -10°C a 40°C
Temperatura de almacenamiento: -20°C a 50°C
Humedad ambiental: 5% - 90% (no condensada)
2
Dependiendo del sistema operativo del dispositivo, ingresa a la opción
correspondiente para proyectar la pantalla en modo espejo*.
3
iOS
Android
Selecciona el nombre del adaptador, y comienza a visualizar en tu
pantalla.
Conexión para iOS
4
iOS
Android
NAVEGA EN INTERNET GARANTÍA
Desactiva el modo espejo (AirPlay) para regresar a la pantalla de
configuración donde podrás ubicar la IP del adaptador.
1
Abre una página de algún navegador, e introduce la IP.
2
IP del adaptador
Selecciona el nombre de la red a la que deseas conectarte e introduce la
contraseña. Presiona OK.
4
Personal
Personal
Ist-Lin
F_1945
Personal
Dirígete a las opciones de configuración Wi-Fi, y selecciona el nombre
del adaptador.
5
Activa el modo espejo nuevamente para navegar en internet y visualizar
en la pantalla.
6
Ist-Lin
F_1945
Elige la opción Internet.
3
Si la conexión es exitosa, los iconos en la pantalla
de configuración de la TV aparecerán como se
muestra en la imagen.
MiraScreen 36A68...
ESPECIFICACIONES
PÓLIZA DE GARANTÍA
Esta póliza garantiza el producto por el término de un año en todos sus componentes y mano
de obra, contra cualquier defecto de fabricación y funcionamiento, a partir de la fecha de
entrega.
CONDICIONES
1.- Para hacer efectiva la garantía, presente esta póliza, o factura, o comprobante de compra y
el producto, en donde fue adquirido o en Electrónica Steren S.A. de C.V.
2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar
defectuoso sin ningún cargo al consumidor. Los gastos de transportación serán cubiertos por
el proveedor.
3.- El tiempo de reparación en ningún caso será mayor a 30 días, contados a partir de la
recepción del producto en cualquiera de los sitios donde pueda hacerse efectiva la garantía.
4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, así como
hacer válida esta garantía es en cualquiera de las direcciones mencionadas posteriormente.
ESTA PÓLIZA NO SE HARÁ EFECTIVA EN LOS SIGUIENTES CASOS:
1.- Cuando el producto ha sido utilizado en condiciones distintas a las normales.
2.- Cuando el producto no ha sido operado de acuerdo con el instructivo de uso.
3.- Cuando el producto ha sido alterado o reparado por personal no autorizado por Electrónica
Steren S.A. de C.V. El consumidor podrá solicitar que se haga efectiva la garantía ante la propia
casa comercial donde adquirió el producto. Si la presente garantía se extraviara, el consumidor
puede recurrir a su proveedor para que le expida otra póliza, previa presentación de la nota de
compra o factura respectiva.
DATOS DEL DISTRIBUIDOR
Nombre del Distribuidor ______________________
Domicilio __________________________________
Número de serie _____________________________
Fecha de entrega _____________________________
En caso de que su producto presente alguna falla,
acuda al centro de distribución más cercano a su
domicilio y en caso de tener alguna duda o pregunta
por favor llame a nuestro Centro de Atención a
Clientes, en donde con gusto le atenderemos en todo
lo relacionado con su producto Steren.
Centro de Atención a Clientes
01 800 500 9000
Producto: Adaptador wi-fi de celular a TV
Modelo: INTV-060
Marca: Steren
ELECTRÓNICA STEREN S.A. DE C.V.
Biólogo Maximino Martínez No. 3408, San Salvador Xochimanca, Del. Azcapotzalco Ciudad de México 02870, RFC:
EST850628-K51
STEREN PRODUCTO EMPACADO S.A. DE C.V.
Autopista México-Querétaro. Km 26.5 Sin número, Nave Industrial 3-A, Col. Lomas de Boulevares, Tlalnepantla de Baz, Estado de
México, C.P. 54020, RFC: SPE-941215-H43
INTV-060
1018m
V0.1
SMARTPHONE TO
TV WI-FI ADAPTER
IMPORTANT
Read these manual to avoid any damage.
The instructions of these manual are for reference about the product.
There may be differences due to update.
Please check our web site www.steren.com to obtain the latest version of the
instruction manual.
Once the connections are made, the configuration screen will be appear; In
case that this does not happen, select on your TV the HDMI input on which the
adapter is connected.
If your Android device was previously connected to a Wi-Fi network, you will
can browse in internet and view everything on the screen.
Press the button on the adapter to select the operating
system of the device that you want to pair. In case that
you select Android, go directly to instruction 3.
CONNECT THE ADAPTER TO TV
PAIR YOUR DEVICE TO
VIEW IN MIRROR MODE
CAUTIONS
• This device is not intended for use by people (including children), whose
physical, sensory or mental abilities are different or reduced, or who lack
experience or knowledge.
• Children should be supervised to ensure they do not use the device as a toy.
• Do not use or store the product in places where there dripping or splashing.
Any unauthorized repair may cause malfunction and void the warranty.
• Minimum input 5 V - - - 1 A
The operation of this device is subject to the following two conditions: (1) it is possible
that this device may not cause harmful interference and (2) this device must accept any
interference, including interference that may cause undesired operation.
HDMI
HDMI
Port
USB Port
Identification name Password
USB Adapter
Select
iOS
Android
1
Check your device's manual to find out if it has technology to project in mirror mode
("Screen Mirroring", "screen projection", "duplicate screen", etc.).
* The images are showed as a reference. The location of the screen transmission options may
vary depending on the operating system and model of the device used
If the connection can not be established, press and
hold the adapter button for about 10 seconds to
restart. Then repeat the procedure to pair the device.
If the connection is successful, will appear the
icons on the TV configuration screen as shown
in the picture.
Enter to Wi-Fi options on your device, and from the list of available
networks select the adapter identification name. Then enter password.
2
Depending on the operating system of the device, enter the
corresponding option to project the screen in mirror mode *.
3
iOS
Android
Select the name of the adapter, and start displaying it on your screen.
iOS connection
4
iOS
Android
BROWSING IN THE INTERNET
Disable the mirror mode (AirPlay) to return to the configuration screen
where you can locate the Adapter IP.
1
Open a page from a browser, and enter the IP.
2
Adapter IP
Select the name of the network that you want connecting to and enter the
password. Press OK.
4
Personal
Personal
Ist-Lin
F_1945
Personal
Go to the Wi-Fi configuration options, and select the name of the adapter.
5
Activate the mirror mode again to browse in internet and viewing on the
screen.
6
Ist-Lin
F_1945
Select the Internet option.
3
If the connection is successful, will appear the
icons on the TV setup screen as shown in the
picture.
MiraScreen 36A68...
Input: 5 V - - - 1 A
Chipset: AM8258
RAM memory: DDR3 128 MB
Nand flash: 128 MB
Wi-Fi: 802.11 b/g/n
Resolution: Hasta 1 080p
Operating temperature: -10°C to 40°C
Input temperature: -20°C to 50°C
Environment humidity: 5% - 90% (non condensed)
SPECIFICATIONS
WARRANTY
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and
materials to the original purchaser for one year on the other parts from the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box
or package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge. The supplier
will pay for transportation charges.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as
warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel, improper
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ________________________
Address __________________________________
Serial number _____________________________
Product __________________________________
01 800 500 9000
In case your product fails or have questions,
please contact your nearest dealer.
If you are in Mexico, please call to our Call
Center.
Product: TV wi-fi adapter
Part number: INTV-060
Brand: Steren
ELECTRÓNICA STEREN S.A. DE C.V.
Biólogo Maximino Martínez No. 3408, San Salvador Xochimanca, Del. Azcapotzalco Ciudad de México 02870, RFC:
EST850628-K51
STEREN PRODUCTO EMPACADO S.A. DE C.V.
Autopista México-Querétaro. Km 26.5 Sin número, Nave Industrial 3-A, Col. Lomas de Boulevares, Tlalnepantla de Baz, Estado de
México, C.P. 54020, RFC: SPE-941215-H43
  • Page 1 1
  • Page 2 2

Steren INTV-060 El manual del propietario

Tipo
El manual del propietario

En otros idiomas