CLP-370/340/330, CLP-S308/S306 DATA LIST
2
MIDI Data Format /
MIDI-Datenformat /
Format des données MIDI /
Formato de datos MIDI
MIDI Channel Message
● : Can be transmitted and recognized.
▲: Cannot be transmitted by the panel operations,
but can be transmitted by song playback data.
✕ : Cannot be transmitted or received.
MIDI Events
Status byte 1st Data byte 2nd Data byte
Transmitted Recognized
Status Data (HEX) Parameter Data (HEX) Parameter
Key Off 8nH (n: channel no.) kk Key no. (0 - 127) vv Velocity (0 - 127) ✕●
Key On 9nH kk Key no. (0 - 127) vv Key On: vv = 1 - 127
Key Off: vv = 0
●●
Control Change BnH 0 (00H) Bank Select MSB 0 (00H) Normal ●●
32 (20H) Bank Select LSB 0 - 127 ●●
1 (01H) Modulation 0 - 127 (...7FH) ▲●
6 (06H) Data Entry MSB 0 - 127 (...7FH) ●●
38 (26H) Data Entry LSB 0 - 127 (...7FH) ●✕
7 (07H) Main Volume 0 - 127 (...7FH) ●●
10 (0AH) Panpot 0 - 127 (...7FH) ▲●
11 (0BH) Expression 0 - 127 (...7FH) ●●
64 (40H) Damper (Sustain) 0 - 127 (...7FH) ●●
66 (42H) Sostenuto 0 - 127 (...7FH) ●●
67 (43H) Soft Pedal 0 - 127 (...7FH) ●●
71 (47H) Harmonic Content 0 - 127 (...7FH) ▲●
72 (48H) Release Time 0 - 127 (...7FH) ▲●
73 (49H) Attack Time 0 - 127 (...7FH) ▲●
74 (4AH) Brightness 0 - 127 (...7FH) ▲●
84 (54H) Portamento Control 0 - 127 (...7FH) ▲●
91 (5BH) Effect1 Depth
(Reverb Send Level)
0 - 127 (...7FH) ●●
93 (5DH) Effect3 Depth
(Chorus Send Level)
0 - 127 (...7FH) ●●
96 (60H) Increment 0 - 127 (...7FH) ▲●
97 (61H) Decrement 0 - 127 (...7FH)
100 (64H) RPN LSB 0 - 127 (...7FH) ●●
101 (65H) RPN MSB 0 - 127 (...7FH)
Mode Message BnH 120 (78H) All Sound Off 0 ▲●
121 (79H) Reset All Controller 0 ▲●
122 (7AH) Local Control 0 - 3F: OFF
40 - 7F: ON
✕●
123 (7BH) All Note Off 0 ▲●
124 (7CH) OMNI OFF 0 ✕●
125 (7DH) OMNI ON 0 ✕●
126 (7EH) MONO 0 - 16 (...10H) ✕●
127 (7FH) POLY 0 ✕●
Note
This instrument is fixed to Multi-timbral Mode and Poly Mode, since these modes do not change even when Omni on/ omni off/ Mono/Poly Mode messages are received.
Program Change CnH pp 0 - 127 – – ●●
Channel After
Touch
DnH vv – ✕✕
Polyphonic After
Touch
AnH kk vv ✕✕
Pitch Bend
Change
EnH cc LSB dd MSB ▲●
Realtime
Message
F8H MIDI Clock – – ●●
FAH Start – – ●●
FBH Continue – – ✕✕
FCH Stop – – ●●
FEH Active Sens – – ●●
FFH System Reset – – ✕✕
Note
When an Overrun or Framing error occurs, the Damper, Sostenuto and Soft are set to off in all channels, and All Notes Off is executed.