Black Box VSP-HDMI2-1X2 Manual de usuario
- Categoría
- Divisores de video
- Tipo
- Manual de usuario
Este manual también es adecuado para
24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM
HDMI 2.0
SPLITTE R 1X4
VSP-HDMI2-1X4
USER MANUAL
INPUT
OUTPUT2
OUTPUT1
DC 12V
OUTPUT3 OUTPUT4
POWER
OUTPUT
1234
EDID TX RX GND
INPUT
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
2
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ........................................................................................................................................... 3
1. SPECIFICATIONS ........................................................................................................................................................................... 4
2. OVERVIEW ...................................................................................................................................................................................... 5
2.1 Introduction ...............................................................................................................................................................................................5
2.2 Features ....................................................................................................................................................................................................5
2.3 What’s Included ........................................................................................................................................................................................ 5
2.4 Hardware Description .............................................................................................................................................................................. 6
3. CONNECTIONS AND INSTALLATION .......................................................................................................................................... 8
Installation Steps ............................................................................................................................................................................................8
4. EDID MANAGEMENT ..................................................................................................................................................................... 9
5. RS-232........................................................................................................................................................................................... 10
RS-232 Pinout ...............................................................................................................................................................................................10
6. TROUBLESHOOTING ................................................................................................................................................................... 11
6.1 Troubleshooting Steps ........................................................................................................................................................................... 11
6.2 Contacting Black Box .............................................................................................................................................................................11
APPENDIX A. REGULATORY INFORMATION ................................................................................................................................ 12
A.1 FCC Statement .......................................................................................................................................................................................12
A.2 NOM Statement .....................................................................................................................................................................................13
APPENDIX B. DISCLAIMER/TRADEMARKS ................................................................................................................................. 14
B.1 Disclaimer ...............................................................................................................................................................................................14
B.2 Trademarks Used in this Manual ..........................................................................................................................................................14
3
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
IMPORTANT SAFETY INSTRUCTIONS
1. Do not expose this apparatus to rain, moisture, dripping or splashing liquids. Do not place any objects filled with liquids, such as vases, on
the apparatus.
2. Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Make sure the unit is well ventilated.
3. To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
5. Do not place sources of open flames, such as lighted candles, on the unit.
6. Clean this apparatus only with a dry cloth.
7. Unplug this apparatus during lightning storms or when unused for long periods of time.
8. Do not walk on or pinch the power cord, particularly at plugs.
9. Only use attachments/accessories specified by the manufacturer.
10. Refer all servicing to qualified service personnel.
41. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
CHAPTER 1: SPECIFICATIONS
TABLE 1-1. SPECIFICATIONS
SPECIFICATION DESCRIPTION
Technical
Input (1) HDMI Type A female
Output (2) HDMI Type A female
Input/Output Signal Type HDMI: HDMI 2.0 w/ HDCP 2.2
Input/Output Resolution
Support
SMPTE: 1280 x 720p, 1920 x 1080i, 1920 x 1080p, 3840 x 2160, 4096 x 2160;
VESA: 800 x 600,1024 x 768,1280 x 768,1280 x 800,1280 x 960,1280 x 1024,1360 x 768,1366 x 768,
1440 x 1050, 1440 x 900,1600 x 900,1600 x 1200,1680 x 1050,1920 x 1200
Audio Format PCM 2.0/5.1/7.1, Dolby TrueHD and DTS HD Master Audio
Maximum Data Rate 18 Gbps
Input Video Signal 0.5 – 1.0 V p-p
Input DDC Signal 5 V p-p
Maximum Pixel Clock 600 MHz
Power Supply 12 VDC, 1 A
Power Consumption
(Maximum) 4 W
General
Operating Temperature 32 to 113° F (0 to 45° C)
Storage Temperature -4 to +158° F (-20 to +70° C)
Humidity 10 to 90%, noncondensing
ESD Protection Human-Body Model: ±8 kV (air-gap discharge)/±4 kV (contact discharge)
Dimensions Each unit: 0.7” H x 6.6” W x 2.7” D (1.8 x 16.7 x 6.9 cm)
Weight Each unit: 0.7 lb. (0.3 kg)
Approvals CE, FCC, IC, RCM, and VCCI
5
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
CHAPTER 1: SPECIFICATIONS
2.1 INTRODUCTION
The HDMI 2.0 Splitter - 4K60, 1 x 4 is a 1 to 4 HDMI splitter. It supports HDMI 2.0 with resolutions up to 4K @ 60 Hz 4:4:4 8-bit and is
HDCP 2.2 compliant.
This device also supports EDID and HDCP management, which authenticates HDCP encryption between all devices, ensuring the HDMI
source reliably outputs the correct content to the displays.
This splitter is an ideal choice for applications such as offices, schools, conference rooms, hotels and museums that require the
distribution of one HDMI source signal to four outputs.
2.2 FEATURES
Slim profile, space saving and easy-to-install
Distributes one HDMI source to four HDMI displays
Supports HDMI 2.0 with resolutions up to 4K @ 60 Hz 4:4:4 8-bit and HDCP 2.2
Multi-channel PCM, Dolby TrueHD and DTS HD audio supported up to 7.1 ch
EDID rotary switch on rear panel for EDID management
RS-232 port for firmware update
Automatic input cable equalization and signal regeneration compensation
2.3 WHAT’S INCLUDED
Your package should include the following items. If anything is missing or damaged, contact Black Box Technical Support
at 877-877-2269 or info@blackbox.com
VSP-HDMI2-1X2 includes:
(1) HDMI 2.0 Splitter - 4K60, 1 x 4
(1) Power supply (12 VDC, 0.5 A)
(1) Phoenix male 3.5-mm connector (3 pins)
(2) Mounting brackets
61. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
CHAPTER 2: OVERVIEW
2.4 HARDWARE DESCRIPTION
Figures 2-1 and 2-2 show the front and back panels of the splitter. Table 2-1 describes its components.
POWER
OUTPUT
1234
INPUT
123
FIGURE 2-1. SPLITTER FRONT PANEL
INPUT
OUTPUT2
OUTPUT1
DC 12V
OUTPUT3 OUTPUT4 EDID TX RX GND
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
241 5
3
FIGURE 2-2. SPLITTER BACK PANEL
7
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
CHAPTER 2: OVERVIEW
TABLE 2-1. SPLITTER COMPONENTS
NUMBER IN
FIGURE 2-1 COMPONENT DESCRIPTION
1 Input LED ON: The HDMI source is connected to the splitter.
OFF: No HDMI source is connected to the splitter.
2 Output 1–4 LEDs ON: The HDMI display is connected to the splitter.
OFF: No HDMI display is connected to the splitter.
3 Power LED ON: The splitter is powered on.
OFF: The splitter is powered off.
NUMBER IN
FIGURE 2-2 COMPONENT DESCRIPTION
1 Power connector Links to 12-VDC power input
2 HDMI Output 1–4 connectors Connect to the HDMI displays
3 HDMI Input connector Connects to the HDMI source device
4 EDID rotary switch Used for EDID management
5 RS-232 connector Used for firmware update
81. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
CHAPTER 3: CONNECTIONS AND INSTALLATION
INSTALLATION STEPS
1. Connect an HDMI source to the HDMI IN port of the splitter via a qualified HDMI 2.0 standard cable.
2. Connect the HDMI displays to the HDMI OUT ports of the splitter.
3. Connect the supplied 12-VDC power supply to the splitter. Check if the Power, HDMI IN and HDMI OUT LEDs light steadily on the
splitter to indicate successful connection.
INPUT
OUTPUT2
OUTPUT1
DC 12V
OUTPUT3 OUTPUT4 EDID TX RX GND
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
TV
HDMI OUT
HDMI IN
PROJECTOR
HDMI OUT
DVD
FIGURE 3-1. TYPICAL APPLICATION
NOTES:
The source may be any HDMI source device such as an Apple TV, STB, DVR, Xbox, DVD player, etc.
The display may be any HDMI display device such as a TV, video wall, interactive whiteboard, projector, etc.
9
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
CHAPTER 4: EDID MANAGEMENT
EDID (Extended Display Identification Data) is a data structure generated by a digital display to communicate its capabilities, such as
its native resolution, to the attached source device.
The splitter supports MIX EDID, Fixed EDID and Copy EDID functions. The desired function can be set using the EDID rotary switch on
the rear panel. When connected to multiple displays simultaneously, the splitter will compare the EDID of all displays and output the
corresponding video resolution and audio channel depending on the switch setting.
The default setting is at position “0.” Set the EDID using the following table:
TABLE 4-1. EDID SETTINGS
MODE DESCRIPTION FUNCTION
0 (Default) MIX EDID: Video compatibility and
Audio quality
Outputs the best audio channel and the most suitable video resolution for all displays
supported.
1 MIX EDID: Video compatibility and
Audio compatibility Outputs the most suitable video resolution and audio channel for all displays supported.
2 MIX EDID: Video quality and Audio
quality Outputs the best video resolution and the best audio channel.
3 MIX EDID: Video quality and Audio
compatibility
Outputs the best video resolution and the most suitable audio channel for all displays
supported.
4 EDID 3840 x 2160 @ 30 Hz_2D_2CH with HDR
5 EDID 3840 X 2160 @ 30 Hz_ 2D _5.1C H with HDR
6 EDID 3840 X 2160 @ 30 Hz_ 2 D _7.1CH with HDR
7 EDID 1920 x 1080@60Hz_3D_2CH with HDR
8 EDID 1920 x 1080@60Hz_3D_5.1CH with HDR
9 EDID 1920 x 1080@60Hz_3D_7.1CH with HDR
A EDID Copy EDID from output1
Others Reserved Reserved
NOTE: For EDID settings 4 - 9, you must re-power the splitter for settings to take effect.
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
FIGURE 4-1. EDID SETTINGS ROTARY SWITCH
10 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
CHAPTER 5: RS-232
RS-232 PINOUT
The following figure shows the RS-232 pinout. Connect with the supplied Phoenix male connector.
FIGURE 5-1. RS-232 CONNECTOR
11
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
CHAPTER 6: TROUBLESHOOTING
6.1 TROUBLESHOOTING STEPS
Follow these steps to troubleshoot your splitter:
1. Power: Make sure all devices are powered on (source, splitter and display devices).
2. Indicator: Make sure the LED indicators of the splitter are normal according to this user manual.
3. Devices: Make sure the picture can be shown normally when connecting source to display devices directly.
4. Cable: Plug in and out the HDMI cable or try another HDMI cable.
Make sure the HDMI cable length is within the transmission range listed in the following table based on different resolutions.
TABLE 6-1. RESOLUTION AND TRANSMISSION RANGE
CABLE RESOLUTION MAXIMUM DISTANCE
HDMI
4K @ 30 Hz,
1080p @ 60 Hz 33 ft. (10 m)
4K @ 60 Hz 10 ft. (3 m)
NOTE: These are maximum distances and depending on cable and other factors, cannot be guaranteed.
5. EDID: There are mulitple output states for video and audio depending on the EDID rotary switch settings. Refer to Chapter 4, EDID
Management to ensure the displays work properly.
6. Compatibility: Test other source and display devices to determine if it is a compatibility issue.
6.2 CONTACTING BLACK BOX
If you determine that your splitter is malfunctioning, do not attempt to alter or repair the unit. It contains no user-serviceable parts.
Contact Black Box Technical Support at 877-877-2269 or info@blackbox.com.
Before you do, make a record of the history of the problem. We will be able to provide more efficient and accurate assistance if you have
a complete description, including:
the nature and duration of the problem.
when the problem occurs.
the components involved in the problem.
any particular application that, when used, appears to create the problem or make it worse.
12 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
APPENDIX A: REGULATORY INFORMATION
A.1 FCC STATEMENT
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict
accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to
comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules,
which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own
expense will be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emis sion from digital apparatus set out in the Radio
Interference Regulation of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques
de classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.
13
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
APPENDIX A: REGULATORY INFORMATION
A.2 NOM STATEMENT
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca
de una alberca, etc.
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo descrito en las instrucciones de operación.
Todo otro servicio deberá ser referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico
sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes que
impidan el flujo de aire por los orificios de ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros
aparatos (incluyendo amplificadores) que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como
se indique en el aparato.
12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados
sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato;o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.
14 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
APPENDIX B: DISCLAIMER/TRADEMARKS
B.1 DISCLAIMER
Black Box Corporation shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover
damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Corporation
may revise this document at any time without notice.
B.2 TRADEMARKS USED IN THIS MANUAL
Black Box and the Black Box logo type and mark are registered trademarks of Black Box Corporation.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
15
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 8 7 7.8 7 7. 2 2 69
NOTES
_
________________________________________________________________________________________________
__
________________________________________________________________________________________________
__
________________________________________________________________________________________________
__
________________________________________________________________________________________________
__
________________________________________________________________________________________________
__
________________________________________________________________________________________________
__
_
________________________________________________________________________________________________
_
________________________________________________________________________________________________
__
________________________________________________________________________________________________
_ _\
________________________________________________________________________________________________
__
________________________________________________________________________________________________
__
______________________________________________________________________________________________
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1. 87 7. 8 7 7. 22 69
© COPYRIGHT 2018 BLACK BOX CORPORATION. ALL RIGHTS RESERVED.
VSP-HDMI2-1X4_USER_REV1.PDF
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Black Box VSP-HDMI2-1X2 Manual de usuario
- Categoría
- Divisores de video
- Tipo
- Manual de usuario
- Este manual también es adecuado para
En otros idiomas
- English: Black Box VSP-HDMI2-1X2 User manual
Documentos relacionados
-
Black Box VSP-HDMI2-1X2 El manual del propietario
-
Black Box VSW-HDMI2-3X1 El manual del propietario
-
-
Black Box HD6224A Manual de usuario
-
Black Box ACU1700A KVM Extender TX and RX Manual de usuario
-
Black Box 4KDPKVMXT-100M Manual de usuario
-
-
-
-