Greenworks Pro 60PS10T Manual de usuario

Marca: Greenworks Pro

Modelo: 60PS10T

Tipo: Manual de usuario

El Greenworks Pro 60PS10T es una motosierra eléctrica de uso rudo con una espada de 10 pulgadas que puede cortar ramas de hasta 8 pulgadas de diámetro. Con un peso de solo 8 libras, es fácil de maniobrar y transportar. La motosierra cuenta con un potente motor de 60 voltios que proporciona una velocidad de cadena de 20 m/s para cortes rápidos y eficientes. La herramienta también está equipada con un sistema de lubricación automático para garantizar que la cadena permanezca afilada y bien lubricada.

PSC404

60PS10T

www.greenworkstools.com

EN OPERATOR MANUALPOLESAW

ES MANUAL DEL OPERADORSIERRA TELESCÓPICA

P0803256-00 Rev B

1 Description.........................................4

1.1 Purpose.............................................................. 4

1.2 Overview........................................................... 4

1.3 Packing list........................................................ 4

2 General power tool safety

warnings.............................................4

2.1 General safety rules........................................... 4

2.2 Child safety........................................................5

3 Symbols on the product.................... 6

4 Risk levels...........................................6

5 Environmentally safe battery

disposal...............................................6

6 Proposition 65....................................7

7 Installation......................................... 7

7.1 Unpack the machine.......................................... 7

7.2 Add bar and chain oil.........................................7

7.3 Assemble the guide bar and the chain............... 8

7.4 Use the shoulder strap........................................8

7.5 Adjust the length of the pole saw...................... 8

7.6 Adjust the angle of the pole saw head............... 9

7.7 Cutting preparation............................................9

7.8 Install the battery pack.......................................9

7.9 Remove the battery pack................................... 9

8 Operation........................................... 9

8.1 Examine the chain oil........................................ 9

8.2 Start the machine............................................... 9

8.3 Stop the machine............................................. 10

8.4 Delimbing a tree.............................................. 10

8.5 Limb tree branches.......................................... 10

9 Maintenance.....................................10

9.1 Adjust the chain tension.................................. 10

9.2 Sharpen the cutters...........................................10

9.3 Guide bar maintenance.................................... 11

10 Transportation and storage............12

11 Troubleshooting...............................12

12 Technical data..................................12

13 Limited warranty............................ 13

14 Exploded view..................................14

English EN

1 DESCRIPTION

1.1 PURPOSE

This product is a cutting implement mounted on a pole to

enable the operator to cut the branches of standing trees. It is

not intended for use as a regular chainsaw.

This appliance is not intended for use by persons with

reduced understanding, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for

their safety.

Never allow children to operate this product.

Never allow adults to operate this equipment without proper

instruction.

Children should be supervised to ensure that they do not play

with the appliance.

1.2 OVERVIEW

1On/off switch

2Lock-out button

3Trigger

4Auxiliary handle

5Pole saw handle

6Carrying ring

7Collar

8Telescoping shaft

9Pole saw head

10 Chain cover

11 Bar

12 Chain

1.3 PACKING LIST

1Pole saw

2Scabbard

3Shoulder strap

4Wrench

5Manual

6Oil

2 GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Do not operate near electrical power lines. The unit has not

been designed to provide protection from electric shock in

the event of contact with overhead electric lines, Consult

local regulations for safe distances from overhead electric

power lines and ensure that the operating position is safe

and secure before operating the saw chain pole pruner.

WARNING

Read all safety warnings and all instructions. Failure to

follow the warnings and instructions may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your battery-

operated (cordless) power tool.

2.1 GENERAL SAFETY RULES

• Avoid Dangerous Environment – Don’t use appliances in

damp or wet locations.

• Don’t Use In Rain.

• Keep Children Away – All visitors should be kept at a

distance from work area.

• Dress Properly – Do not wear loose clothing or jewelry.

They can be caught in moving parts. Use of rubber gloves

and substantial footwear is recommended when working

outdoors. Wear protective hair covering to contain long

hair.

• Use Safety Glasses – Always use face or dust mask if

operation is dusty.

• Use Right Appliance – Do not use appliance for any job

except that for which it is intended.

• Avoid Unintentional Starting – Don't carry plugged-in

appliance with finger on switch. Be sure switch is off

when plugging in. Carrying the appliance with your

finger on the switch or energizing appliance that have the

switch on invites accidents.

• Don’t grasp the exposed cutting blades or cutting edges

when picking up or holding the appliance. (For grass

shears and similar appliances only.)

• Don’t Force Appliance – It will do the job better and with

less likelihood of a risk of injury at the rate for which it

was designed.

• Don’t Overreach – Keep proper footing and balance at all

times.

• Stay Alert – Watch what you are doing. Use common

sense. Do not operate appliance when you are tired.

• Disconnect Appliance – Disconnect the appliance from

the power supply when not in use, before servicing, when

changing accessories such as blades, and the like.

English

• Store Idle Appliances Indoors – When not in use,

appliances should be stored indoors in dry, and high or

locked-up place – out of reach of children.

• Maintain Appliance With Care – Keep cutting edge sharp

and clean for best performance and to reduce the risk of

injury. Follow instructions for lubricating and changing

accessories. Keep handles dry, clean, and free from oil

and grease.

• Check Damaged Parts – Before further use of the

appliance, a guard or other part that is damaged should be

carefully checked to determine that it will operate

properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, mounting, and any other condition that

may affect its operation. A guard or other part that is

damaged should be properly repaired or replaced by an

authorized service center unless indicated elsewhere in

this manual.

• Keep all parts of the body away from the saw chain. Do

not remove cut material or hold material to be cut when

blades are moving. Make sure the switch is off when

clearing jammed material. Saw chain continues to move

after the switch is turned off. A moment of inattention

while operating the pole saw may result in serious

personal injury.

• Carry the pole saw by the handle with the saw chain

stopped. When transporting or storing the pole saw,

always fit the saw chain device cover. Proper handling of

the pole saw will reduce possible personal injury from the

saw chain.

• Hold the pole saw by insulated gripping surfaces only,

because the saw chain may contact hidden wiring or its

own cord. A saw chain contacting a "live" wire may make

exposed metal parts of the pole saw "live" and could give

the operator an electric shock.

• Keep cable away from cutting area. During operation the

cable may be hidden in shrubs and can be accidentally cut

by the saw chain.

• Do not use the pole saw in bad weather conditions,

especially when there is a risk of lightning. This

decreases the risk of being struck by lightning.

• To reduce the risk of electrocution, never use near any

electrical power lines. Contact with or use near power

lines may cause serious injury or electric shock resulting

in death.

• Always use two hands when operating the pole saw. Hold

the pole saw with both hands to avoid loss of control.

• Always use head protection when operating the pole saw

overhead. Falling debris can result in serious personal

injury.

• Prevent unintentional starting. Ensure the power switch is

in the off-position before connecting to battery pack,

picking up or carrying the appliance. Carrying the

appliance with your finger on the power switch or

energizing appliance that have the power switch on

invites accidents.

• Make sure the power switch is off and the battery pack is

removed before clearing jammed material, making

adjustments, changing accessories, storing or servicing

the appliance. Unexpected actuation of the appliance

while clearing jammed material or servicing may result in

serious personal injury.

• Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

• Use appliances only with specifically designated battery

packs. Use of any other battery packs may create a risk of

injury and fire.

• When battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws

or other small metal objects, that can make a connection

from one terminal to another. Shorting the battery

terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs,

flush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns.

• Do not use a battery pack or appliance that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behavior resulting in fire, explosion or risk

of injury.

• Do not expose a battery pack or appliance to fire or

excessive temperature. Exposure to fire or temperature

above 130°C may cause explosion. The temperature of

130°C can be replaced by the temperature of 265°F.

• Follow all charging instructions and do not charge the

battery pack or appliance outside of the temperature range

specified in the instructions. Charging improperly or at

temperatures outside of the specified range may damage

the battery and increase the risk of fire.

• Have servicing performed by a qualified repair person

using only identical replacement parts. This will ensure

that the safety of the product is maintained.

• Do not modify or attempt to repair the appliance or the

battery pack (as applicable) except as indicated in the

instructions for use and care.

2.2 CHILD SAFETY

Tragic accidents can occur if the operator is not aware of the

presence of children.

• Keep children out of the working area and under the

watchful care of a responsible adult.

• Do not allow children under the age of 14 to operate this

machine. Children who are 14 years of age and older

must read and understand the operating instructions and

safety rules in this manual and must be trained and

supervised by a parent.

• Stay alert, and turn the machine off if a child or any other

person enters the working area.

• Use extreme care when approaching blind corners,

doorways, shrubs, trees, or other objects that may obscure

your view of a child who may run into the path of the

machine.

English EN

3 SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this product.

Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the

product better and safer.

Symbol Explanation

Direct current-Type or characteristic

of current.

Precautions that involve your safety.

Read and understand all instructions

before operating the product, and fol-

low all warnings and safety instruc-

tions.

Wear eye protection.

Do not expose the product to rain or

moist conditions.

Wear ear protection.

Wear head protection.

Wear safety footwear.

Wear non-slip, heavy duty gloves.

DANGER! Risk of electrocution!

4 RISK LEVELS

The following signal words and meanings are intended to

explain the levels of risk associated with this product.

SYM-

BOL

SIGNAL MEANING

DANGER Indicates an imminently haz-

ardous situation, which, if not

avoided, will result in death

or serious injury.

SYM-

BOL

SIGNAL MEANING

WARNING Indicates a potentially hazard-

ous situation, which, if not

avoided, could result in death

or serious injury.

CAUTION Indicates a potentially hazard-

ous situation, which, if not

avoided, may result in minor

or moderate injury.

CAUTION (Without Safety Alert Sym-

bol) Indicates a situation that

may result in property dam-

age.

5 ENVIRONMENTALLY SAFE

BATTERY DISPOSAL

The toxic and corrosive materials below are in the batteries

used in this machine: Lithium-Ion, a toxic material.

WARNING

Discard all toxic materials in a specified manner to prevent

contamination of the environment. Before discarding

damaged or worn out Li-ion battery, contact your local

waste disposal agency, or the local Environmental

Protection Agency for information and specific instructions.

Take the batteries to a local recycling and/or disposal center,

certified for lithium-ion disposal.

English

WARNING

If the battery pack cracks or breaks, with or without leaks,

do not recharge it and do not use. Discard it and replace

with a new battery pack. DO NOT TRY TO REPAIR IT! To

prevent injury and risk of fire, explosion, or electric shock,

and to avoid damage to the environment:

• Cover the terminals of the battery with heavy-duty

adhesive tape.

• DO NOT try to remove or destroy any of the battery

pack components.

• DO NOT try to open the battery pack.

• If a leak develops, the released electrolytes are

corrosive and toxic. DO NOT get the solution in the

eyes or on skin, and do not swallow it.

• DO NOT put these batteries in your regular household

trash.

• DO NOT incinerate.

• DO NOT put them where they will become part of any

waste landfill or municipal solid waste stream.

• Take them to a certified recycling or disposal center.

6 PROPOSITION 65

WARNING

This product contains a chemical known to the state of

California to cause cancer, birth defects or other

reproductive harm. Some dust created by power sanding,

sawing, grinding, drilling, and other construction activities

contains chemicals known to cause cancer, birth defects or

other reproductive harm. Some examples of these chemicals

are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement and other

masonry products;

• Arsenic and chromium from chemically treated lumber.

Your risk of exposure to these chemicals varies depending

on how often you do this type of work. To reduce your

exposure to these chemicals, work in a well-ventilated area,

and work with approved safety equipment, such as dust

masks that are specially designed to filter out microscopic

particles.

Save these instructions.

7 INSTALLATION

7.1 UNPACK THE MACHINE

WARNING

Make sure that you correctly assemble the machine before

use.

WARNING

• If parts of the machine are damaged, do not use the

machine.

• If you do not have all the parts, do not operate the

machine.

• If parts are damaged or missing, contact the service

center.

1. Open the package.

2. Read the documentation provided in the box.

3. Remove all the unassembled parts from the box.

4. Remove the machine from the box.

5. Discard the box and packing material in compliance with

local regulations.

7.2 ADD BAR AND CHAIN OIL

Examine the amount of oil in the machine. If the oil level is

low, add the bar and chain oil as follows.

IMPORTANT

Use only bar and chain oil.

NOTE

The machine comes from the factory without bar and chain

oil.

1. Loosen and remove the cap (13) from the oil tank.

2. Put the oil into the oil tank.

3. Monitor the oil window (14) to make sure that no dirt

gets into the oil tank while you add the oil.

4. Put the oil cap on.

5. Tighten the oil cap.

6. The whole oil tank will last for approximately 15 - 40

minutes.

IMPORTANT

Do not use dirty, used or contaminated oil. Damage can

occur to the bar or chain.

English EN

7.3 ASSEMBLE THE GUIDE BAR AND

THE CHAIN

1. Loosen the chain cover by turning the bar nut (22)

counterclockwise.

2. Remove the chain cover (10).

21 22

3. Put the chain drive links (17) into the bar groove (15).

4. Put the chain cutters (16) in the direction of the chain

operation.

5. Put the chain in position and make sure that the loop is

behind the guide bar.

6. Hold the chain and bar.

7. Put the chain loop around the sprocket (19).

8. Make sure the chain tension pin hole (20) on the guide

bar fits correctly with the bolt.

9. Install the chain cover.

10. Tighten the chain. Refer to Adjust the chain tension.

11. Tighten the bar nut when the chain is correctly tensioned.

NOTE

If you start the chain saw with a new chain, have a test for

2-3 minutes. A new chain gets longer after the first use,

examine the tension and tighten the chain if necessary.

7.4 USE THE SHOULDER STRAP

60°MAXIMUM

1. Attach the carabiner to the carrying ring on the pole.

2. Put on the shoulder strap.

3. Adjust the length of the strap so that the carabiner is

about the width of a hand below your right hip.

7.5 ADJUST THE LENGTH OF THE

POLE SAW

1. Loose the collar (7) by turning it counterclockwise.

2. Pull / Push the telescoping shaft (8) to adjust the length of

the polesaw.

3. Turn the collar clockwise to tight it.

English

7.6 ADJUST THE ANGLE OF THE

POLE SAW HEAD

The pole saw head has two angles：0° or 90°，the pole saw

can cut vertically or horizontally.

1. Loose the two screws on the pole saw head (9) with the

wrench.

2. Turning the pole saw head 90° until the screws fit into the

screw holes on the pole.

3. Tighten the screws.

7.7 CUTTING PREPARATION

Before you start to cut, make sure that

• Wear heavy gloves for maximum grip and protection.

• Maintain a proper grip on the machine during operation.

• Use your right hand grip on the rear handle while

your left hand grip on the pole shaft.

• Keep your body to the left of the chain line.

• Never use a left-handed (cross-handed) grip, or any

stance that places your body or arm across the chain

line.

• Never stand directly under the limb you are cutting.

• Periodically examine the tightness of the collars during

operation.

7.8 INSTALL THE BATTERY PACK

WARNING

• If the battery pack or charger is damaged, replace the

battery pack or the charger.

• Stop the machine and wait until the motor stops before

you install or remove the battery pack.

• Read and understand the instructions in the battery and

charger manual.

1. Align the lift ribs on the battery pack with the grooves in

the battery compartment.

2. Push the battery pack into the battery compartment until

the battery pack locks into place.

3. When you hear a click, the battery pack is installed.

7.9 REMOVE THE BATTERY PACK

1. Push and hold the battery release button (18).

2. Remove the battery pack from the machine.

8 OPERATION

NOTE

Remove the battery pack and keep hands clear of the lock

out button when you move the machine.

IMPORTANT

Examine the chain tension before each use.

8.1 EXAMINE THE CHAIN OIL

NOTE

Do not use the machine without sufficient chain oil.

1. Examine the oil level of the machine from the oil

indicator.

2. Add oil if necessary.

8.2 START THE MACHINE

1. Press the on/off switch (1).

2. Pull the lock-out button (2) backward with your thumb.

3. Press the trigger (3) at the same time.

4. Release the lock-out button.

English EN

8.3 STOP THE MACHINE

1. Release the trigger to stop the machine.

8.4 DELIMBING A TREE

WARNING

Make sure that there is nothing or nobody in the area where

the branches fall.

• Stand opposite the branch you will cut.

• Start to cut the higher branches.

• Then cut the lower branches.

• Cut downwards to prevent the bar from jamming.

8.5 LIMB TREE BRANCHES

Limbing is to remove the branches from a fallen tree.

1. Keep the larger lower branches to hold the log off the

ground.

2. Remove the small limbs in one cut.

3. Limb the branches with tension from the bottom to up.

4. Keep the larger lower branches as a support until the log

is limbed.

9 MAINTENANCE

CAUTION

Do not let brake fluids, gasoline, petroleum-based materials

touch the plastic parts. Chemicals can cause damage to the

plastic, and make the plastic unserviceable.

CAUTION

Do not use strong solvents or detergents on the plastic

housing or components.

WARNING

Remove the battery pack from the machine before

maintenance.

9.1 ADJUST THE CHAIN TENSION

CAUTION

Wear protective gloves if you touch the chain, bar or areas

around the chain.

1. Loosen the chain cover by turning the bar nut (22)

counterclockwise.

21 22

NOTE

It is not necessary to remove the chain cover to adjust the

chain tension.

2. Turn the chain tension screw (21) clockwise to increase

the chain tension.

3. Turn the chain tension screw counterclockwise to

decrease the chain tension.

4. When the chain is at the wanted tension, tighten the chain

cover.

9.2 SHARPEN THE CUTTERS

Sharpen the cutters if chain does not go into wood easily.

English

NOTE

We recommend that a service center, which has an electric

sharpener, perform important sharpening work.

1. Tensioning chain.

2. Sharpen the cutters corner with a 5/32 in. (4 mm)

diameter round file .

3. Sharpen the top plate, side plate and depth gauge with a

flat file.

4. File all the cutters to the specified angles and the same

length.

NOTE

During the process:

• Keep the file flat with the surface to be sharpened.

• Use the midpoint of the file bar.

• Use light but firm pressure when sharpening the

surface.

• Lift the file away on each return stroke.

• Sharpen the cutters on one side and then move to the

other side.

Replace the chain if:

• The length of the cutting edges is less than 1/5 in. (5

mm).

• There is too much space between the drive links and the

rivets.

• The cut speed is slow.

• Sharpening the chain many times but it does not increase

the cutting speed. The chain is worn.

9.3 GUIDE BAR MAINTENANCE

NOTE

Make sure that the bar is turned over periodically to keep

symmetrical wear on the bar.

1. Lubricate the bearings on the nose sprocket (if present)

with the syringe (not included).

2. Clean the bar groove with the scraping hook (not

included).

3. Clean the lubrication holes.

4. Remove burr from the edges and level the cutters with a

flat file.

Replace the bar if:

English EN

• the groove does not fit with the height of the drive links

(which must never touch the bottom).

• the inside of the guide bar is worn and makes the chain

lean to one side.

10 TRANSPORTATION AND

STORAGE

Before you move the machine, always

• Remove the battery pack from the machine.

• Keep hands clear of the lock-out button.

• Put the scabbard on the guide bar and the chain.

Before you put the machine into storage, always

• Remove all residual oil from the machine.

• Remove the battery pack from the machine.

• Clean all unwanted material from the machine.

• Make sure that the storage area is

• Not available to children.

• Away from agents which can cause corrosion, such as

garden chemicals and de-icing salts.

11 TROUBLESHOOTING

Problem Possible cause Solution

The machine does

not start.

The poles are not

assembled cor-

rectly.

Assemble the

poles according to

the instructions.

The lock-out but-

ton and trigger are

not depressed at

the same time.

1. Push and hold

the lock-out

button

2. While you

hold the lock-

out button,

pull the trig-

ger.

3. Release the

lock-out but-

ton to start the

machine.

Problem Possible cause Solution

The bar and chain

gets hot and

smokes.

Oil tank is empty. Fill the oil tank.

The discharge

port is blocked.

1. Remove the

battery pack.

2. Remove dirt

from the dis-

charge port.

Inlet opening of

inner oil tank is

blocked.

1. Clean the oil

tank.

2. Fill with clean

bar and chain

lubricant.

The sprocket is

stuck and clogged

with debris.

1. Clean the

sprocket.

2. Fill with clean

bar and chain

lubricant.

The bar and chain

gets too hot and

can not cut.

The chain tension

is too tight or too

loose.

Refer to Adjust

the Chain Tension

in the manual.

The chain is dull Sharpen or re-

place the chain.

The chain is put

on backwards.

Take out the chain

and turn it in the

right direction.

The motor runs,

but the chain does

not cut correctly,

or the motor stops

after around 3

seconds.

When you use the

machine under

load, it stops.

1. Release the

trigger.

2. Start the ma-

chine again.

The chain is not

lubricated.

Lubricate the

chain to decrease

the friction.

12 TECHNICAL DATA

Voltage 60 V DC

Guide bar length 10'' (254 mm)

Chain pitch 1/4" LP (6.3 mm)

Chain gauge .050" (1.3 mm)

Chain oil capacity 5 oz (150 ml)

Weight (without battery

pack)

12.1 lbs (5.5 kg)

Chain 25AP058X

Guide bar 100SDAA041

Battery model 60BA02/60BA25/60BA03/6

0BA04/60BA05/60BA06/60

BA08 and other BAC series

Charger model 60DP10/606P14 and other

CAC series

English

IPX IPX4

The recommended ambient temperature range:

Item Temperature

Appliance storage tempera-

ture range

32°F (0°C) - 113°F (45°C)

Appliance operation temper-

ature range

32°F (0°C) - 113°F (45°C)

Battery charging temperature

range

39°F (4°C) - 104°F (40°C)

Charger operation tempera-

ture range

39°F (4°C) - 104°F (40°C)

Battery storage temperature

range

32°F (0°C) - 113°F (45°C)

Battery discharging tempera-

ture range

32°F (0°C) - 113°F (45°C)

13 LIMITED WARRANTY

Greenworks hereby warranties this product, to the original

purchaser with proof of purchase, for a period of four (4)

years against defects in materials, parts or workmanship.

Greenworks, at its own discretion will repair or replace any

and all parts found to be defective, through normal use, free

of charge to the customer. This warranty is valid only for

units which have been used for personal use that have not

been hired or rented for industrial/commercial use, and that

have been maintained in accordance with the instructions in

the owners’ manual supplied with the product from new.

ITEMS NOT COVERED BY WARRANTY:

1. Any part that has become inoperative due to misuse,

commercial use, abuse, neglect, accident, improper

maintenance, or alteration; or

2. The unit, if it has not been operated and/or maintained in

accordance with the owner's manual; or

3. Normal wear, except as noted below;

4. Routine maintenance items such as lubricants, blade

sharpening;

5. Normal deterioration of the exterior finish due to use or

exposure.

HELPLINE:

Warranty service is available by calling our toll-free helpline,

at 1-855-345-3934.

TRANSPORTATION CHARGES:

Transportation charges for the movement of any power

equipment unit or attachment are the responsibility of the

purchaser. It is the purchaser’s responsibility to pay

transportation charges for any part submitted for replacement

under this warranty unless such return is requested in writing

by Greenworks.

USA address:

Greenworks Tools

P.O. Box 1238

Mooresville, NC 28115

English EN

14 EXPLODED VIEW

132 4

5 6 7

Part No. Qty Description No

Part No. Qty Description

1 R0202779-00 1 Bar / Chain 5 RB311051734F 1 Oil Cap Assembly

2 R0202780-00 1 Sprocket Cover Assembly 6 RB37902144 1 Harness Assembly

3 R0202781-00 1 Sprocket Kit 7 R0200958-00 1 Scabbard

4 RB333101726 1 Wrench

English

especificado en las instrucciones. La carga incorrecta o a

temperaturas fuera del intervalo especificado puede dañar

la batería y aumentar el riesgo de incendio.

• Solicite a un técnico de reparación cualificado que realice

las tareas de servicio utilizando únicamente piezas de

repuesto idénticas. Esto garantizará el mantenimiento de

la seguridad del producto.

• No modifique ni intente reparar el aparato o la batería

(según corresponda), excepto lo indicado en las

instrucciones de uso y cuidado.

2.2 SEGURIDAD INFANTIL

Pueden producirse accidentes trágicos si el operario no es

consciente de la presencia de niños.

• Mantenga a los niños fuera de la zona de trabajo y bajo la

vigilancia de un adulto responsable.

• No permita que niños menores de 14 años utilicen esta

herramienta. Los niños de 14 años y mayores deben leer y

entender las instrucciones de funcionamiento y las

normas de seguridad que se encuentran en este manual y

deben recibir formación y supervisión por parte de uno de

sus progenitores.

• Manténgase alerta y apague el aparato si un niño o

cualquier otra persona entra en la zona de trabajo.

• Tenga mucho cuidado al acercarse a esquinas ciegas,

portales, arbustos, árboles u otros objetos que puedan

ocultar su visión de un niño que pueda correr hacia el

recorrido del aparato.

3 SÍMBOLOS EN EL PRODUCTO

En el producto pueden utilizarse algunos de los siguientes

símbolos. Le rogamos que los estudie y aprenda su

significado. La interpretación correcta de estos símbolos le

permitirá manejar el producto mejor y de manera más segura.

Símbolo Explicación

Tipo de corriente directa o caracterís-

tica de corriente.

Precauciones que afectan a su seguri-

dad.

Debe leer y entender todas las instruc-

ciones antes de manejar el producto,

así como seguir todas las advertencias

e instrucciones de seguridad.

Lleve protección ocular.

No exponga el producto a la lluvia o a

condiciones de humedad.

Lleve protección auditiva.

Símbolo Explicación

Lleve protección en la cabeza.

Lleve calzado de seguridad.

Lleve guantes antideslizantes resis-

tentes.

¡PELIGRO! ¡Riesgo de electrocución!

4 NIVELES DE RIESGO

Las siguientes indicaciones y significados tienen como fin

explicar los niveles de riesgo asociados a este producto.

SÍMBO-

INDICACIÓN SIGNIFICADO

PELIGRO Indica una situación de peli-

gro inminente que, de no evi-

tarse, provocará lesiones

graves o incluso la muerte.

ADVERTEN-

CIA

Indica una situación de peli-

gro potencial que, de no evita-

rse, podría provocar lesiones

graves o incluso la muerte.

PRECAUCIÓN Indica una situación de peli-

gro potencial que, de no evita-

rse, puede provocar lesiones

leves o moderadas.

PRECAUCIÓN (Sin símbolo de alerta sobre

seguridad) Indica una situa-

ción que puede provocar da-

ños materiales.

5 ELIMINACIÓN DE BATERÍA

SEGURA PARA EL MEDIO

AMBIENTE

Los materiales tóxicos y corrosivos que figuran a

continuación se encuentran en las baterías utilizadas en esta

máquina: Ion de litio, un material tóxico.

Español

AVISO

Deseche todos los materiales tóxicos de una manera

especificada para evitar la contaminación del medio

ambiente. Antes de desechar una batería de ion de litio

dañada o agotada, contacte con la agencia local de

eliminación de residuos o con la agencia de protección

ambiental local para obtener información e instrucciones

específicas. Lleve las baterías a un centro de reciclaje o

eliminación local, certificado para la eliminación de ion de

litio.

AVISO

Si la batería se agrieta o se rompe, con o sin fugas, no la

recargue ni la utilice. Deséchela y sustitúyala por una

batería nueva. ¡NO INTENTE REPARARLA! Para evitar

lesiones y riesgos de incendio, explosión o descarga

eléctrica, y para evitar daños al medio ambiente:

• Cubra los terminales de la batería con cinta adhesiva

resistente.

• NO intente retirar o destruir ninguno de los

componentes de la batería.

• NO intente abrir la batería.

• Si se produce una fuga, los electrolitos liberados son

corrosivos y tóxicos. NO deje que la solución entre en

contacto con los ojos o la piel, y no la ingiera.

• NO deseche estas baterías con la basura doméstica

normal.

• NO incinere.

• NO lleve las baterías a lugares donde formarán parte de

vertederos de residuos o flujos de residuos sólidos

urbanos.

• Llévelas a un centro de reciclaje o eliminación

certificado.

6 PROPUESTA 65

AVISO

Este producto contiene una sustancia química conocida en

el estado de California como causante de cáncer, defectos

de nacimiento u otros daños reproductivos. El polvo

generado por el lijado eléctrico, el serrado, el esmerilado, la

perforación y otras actividades de construcción contiene

sustancias químicas que se sabe que son causantes de

cáncer, defectos de nacimiento u otros daños reproductivos.

Algunos ejemplos de estas sustancias químicas son:

• Plomo de pinturas con base de plomo;

• Sílice cristalina de ladrillos y cemento y otros productos

de albañilería;

• Arsénico y cromo de la madera tratada químicamente.

El riesgo de exposición a estas sustancias químicas varía

según la frecuencia con la que realice este tipo de trabajo.

Para reducir su exposición a estas sustancias químicas,

trabaje en una zona bien ventilada y trabaje con equipos de

seguridad aprobados, como máscaras antipolvo, que estén

especialmente diseñadas para filtrar partículas

microscópicas.

Conserve estas instrucciones.

7 INSTALACIÓN

7.1 DESEMBALAJE DE LA MÁQUINA

AVISO

Asegúrese de montar correctamente la máquina antes del

uso.

AVISO

• Si las piezas de la máquina presentan daños, no utilice

la máquina.

• Si no tiene todas las piezas, no utilice la máquina.

• Si faltan piezas o hay piezas dañadas, contacte con el

centro de servicio.

1. Abra el embalaje.

2. Lea la documentación que se proporciona en la caja.

3. Retire todas las piezas sin montar de la caja.

4. Retire la máquina de la caja.

5. Deseche la caja y el material de embalaje de conformidad

con los reglamentos locales.

7.2 ADICIÓN DE ACEITE PARA

BARRAS Y CADENAS

Examine la cantidad de aceite que hay en la máquina. Si el

nivel de aceite es bajo, añada el aceite para barras y cadenas

de la siguiente manera.

Español

Greenworks Pro 60PS10T Manual de usuario

Marca: Greenworks Pro

Modelo: 60PS10T

Tipo: Manual de usuario

Descargar PDF

informe

En otros idiomas

English: Greenworks Pro 60PS10T User manual

Greenworks Pro 60PS10T Manual de usuario

Greenworks Pro 60PS10T Manual de usuario

En otros idiomas

Otros documentos