Yamaha RX-V 585 El manual del propietario
- Categoría
- Receptores AV
- Tipo
- El manual del propietario
Este manual también es adecuado para
AV Receiver
Owner's Manual
• This unit is a product for enjoying video and music at home.
• This manual explains preparations and operations for everyday users of the unit.
• Read the supplied booklet “Quick Start Guide” before using the unit.
EN
CONTENTS
BEFORE USING THE UNIT 7
How to use this manual............................................................................ 7
How to use this manual......................................................................................................................................................... 7
Checking the accessories.......................................................................... 7
Checking the accessories...................................................................................................................................................... 7
Using the remote control......................................................................... 7
Insert the batteries in the remote control....................................................................................................................... 7
Operating range of the remote control........................................................................................................................... 7
FEATURES 8
What you can do with the unit................................................................. 8
Part names and functions...................................................................... 10
Part names and functions of the front panel............................................................................................................... 10
Part names and functions of the front display............................................................................................................ 12
Part names and functions of the rear panel................................................................................................................. 13
Part names and functions of the remote control....................................................................................................... 14
PREPARATIONS 15
1 Connecting speakers........................................................................ 15
Names and functions of speakers.................................................................................................................................... 15
Speaker systems and speakers to be connected....................................................................................................... 16
Speaker requirements.......................................................................................................................................................... 16
Setting the speaker impedance....................................................................................................................................... 17
Cable requirements.............................................................................................................................................................. 17
How to connect speakers................................................................................................................................................... 17
How to place speakers (speaker systems).................................................................................................................... 19
Connecting front speakers that support bi-amp connections............................................................................. 24
2 Connecting a TV................................................................................ 25
HDMI connection with a TV............................................................................................................................................... 25
VIDEO (composite video) connection with a TV........................................................................................................ 25
3 Connecting playback devices.......................................................... 26
HDMI connection with a video device such as a BD/DVD player......................................................................... 26
Connection other than HDMI with a playback device............................................................................................. 26
Connecting to the jack on the front panel................................................................................................................... 27
4 Connecting the FM/AM antennas.................................................... 28
Connecting the FM/AM antennas................................................................................................................................... 28
5 Preparing for connecting to a network........................................... 29
Preparing for connecting to a network......................................................................................................................... 29
Connecting a network cable (wired connection)...................................................................................................... 29
Preparing wireless antennas (wireless connection).................................................................................................. 30
6 Plugging in the power cable............................................................ 30
Plugging in the power cable............................................................................................................................................. 30
7 Selecting the on-screen menu language........................................ 31
Selecting the on-screen menu language...................................................................................................................... 31
8 Configuring the necessary speaker settings.................................. 32
Assigning speaker configuration..................................................................................................................................... 32
Optimizing the speaker settings automatically (YPAO).......................................................................................... 33
Error messages from YPAO................................................................................................................................................ 35
Warning messages from YPAO......................................................................................................................................... 36
9 Setting MusicCast............................................................................. 37
What is MusicCast.................................................................................................................................................................. 37
Using MusicCast CONTROLLER......................................................................................................................................... 37
Adding the unit to the MusicCast network.................................................................................................................. 37
ENJOYING SOUND 38
Enjoying sound field effects.................................................................. 38
Select your favorite sound mode..................................................................................................................................... 38
Enjoying 3D sound fields (CINEMA DSP 3D)................................................................................................................ 38
Enjoying sound field effects optimized for the type of content........................................................................... 39
Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)............................................ 39
Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT).................................... 39
Enjoying surround sound with headphones (SILENT CINEMA)............................................................................ 39
En
2
Enjoying unprocessed playback............................................................ 40
Enjoying original sound (straight decode)................................................................................................................... 40
Enjoying multichannel playback without sound field effects (surround decoder)....................................... 40
Enjoying pure high fidelity sound (direct playback)................................................................................................. 41
Enjoying enhanced bass sound............................................................. 41
Enhancing the bass (Extra Bass)....................................................................................................................................... 41
Enjoying enhanced compressed music................................................. 42
Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)......... 42
Enjoying Dolby Atmos® and DTS:X™..................................................... 42
Enjoying Dolby Atmos® and DTS:X™.............................................................................................................................. 42
Enjoying music in multiple rooms......................................................... 43
Playing back music in multiple rooms........................................................................................................................... 43
Connecting Zone B speakers............................................................................................................................................. 43
Operating the Zone B........................................................................................................................................................... 44
Correcting volume difference between Zone A and Zone B................................................................................. 45
Adjusting the volume for Zone B separately............................................................................................................... 45
PLAYBACK 46
Basic playback procedure...................................................................... 46
Basic procedure for playing back video and music................................................................................................... 46
Switching information on the front display................................................................................................................. 47
Item names and functions of the playback screen.................................................................................................... 48
Item names and functions of the browse screen....................................................................................................... 49
Listening to FM/AM radio....................................................................... 50
Setting the frequency steps............................................................................................................................................... 50
Selecting a frequency for reception............................................................................................................................... 51
Selecting a preset station................................................................................................................................................... 52
Registering radio stations automatically (Auto Preset)........................................................................................... 52
Registering a radio station manually.............................................................................................................................. 53
Clearing preset stations....................................................................................................................................................... 54
Displaying the Radio Data System information......................................................................................................... 54
Receiving traffic information automatically................................................................................................................ 55
Playing back music stored on a Bluetooth® device.............................. 56
Playback Bluetooth® device music on the unit........................................................................................................... 56
Enjoying audio using Bluetooth® speakers/headphones....................................................................................... 57
Playing back music with AirPlay............................................................ 58
Playback of iTunes/iPhone music contents with AirPlay........................................................................................ 58
Playing back music stored on a USB storage device............................ 59
Playback of USB storage device contents..................................................................................................................... 59
Playing back music stored on media servers (PCs/NAS)...................... 60
Media sharing setup on media servers (PCs/NAS)..................................................................................................... 60
Playing back music stored on media servers (PCs/NAS)......................................................................................... 60
Listening to Internet radio..................................................................... 62
Selecting an Internet radio station.................................................................................................................................. 62
Registering favorite Internet radio stations................................................................................................................. 62
Listening to music streaming services.................................................. 63
Listening to a streaming service...................................................................................................................................... 63
Useful playback functions...................................................................... 64
SCENE function....................................................................................................................................................................... 64
Shortcut function................................................................................................................................................................... 66
Configuring playback settings for different playback sources
(Option menu)......................................................................................... 68
Basic operation of the Option menu.............................................................................................................................. 68
Option menu items............................................................................................................................................................... 69
Switching the input source................................................................................................................................................ 70
Adjusting the tone of the audio output........................................................................................................................ 70
Configuring DSP/Surround................................................................................................................................................ 70
Correcting volume differences during playback........................................................................................................ 73
Enabling Lipsync adjustment............................................................................................................................................ 73
Checking information about the video/audio signals............................................................................................. 74
Combining audio of another input source with video of the current input source...................................... 74
Selecting a video source to be output with the selected audio source............................................................ 75
Switching between stereo and monaural for FM radio reception...................................................................... 75
Setting presets for radio stations..................................................................................................................................... 76
Receiving traffic information automatically................................................................................................................ 77
Configuring the shuffle setting........................................................................................................................................ 77
Configuring the repeat setting......................................................................................................................................... 78
Enabling volume control via AirPlay............................................................................................................................... 78
Adding an Internet radio station to the “Favorites” folder..................................................................................... 78
Removing an Internet radio station from the “Favorites” folder.......................................................................... 78
En
3
CONFIGURATIONS 79
Configuring various functions (Setup menu)....................................... 79
Basic operation of the Setup menu................................................................................................................................ 79
Setup menu items................................................................................................................................................................. 80
Configuring the speaker settings.......................................................... 83
Setting your speaker system............................................................................................................................................. 83
Setting the use of a subwoofer......................................................................................................................................... 83
Setting the size of the front speakers............................................................................................................................. 83
Setting the use of a center speaker and its size.......................................................................................................... 84
Setting the use of surround speakers and their size................................................................................................. 84
Setting the use of surround back speakers and their size...................................................................................... 85
Setting the use of presence speakers and their size................................................................................................. 85
Setting the layout of the presence speakers............................................................................................................... 86
Setting the crossover frequency of the low-frequency components................................................................. 86
Setting the phase of the subwoofer............................................................................................................................... 86
Setting the use of Extra Bass.............................................................................................................................................. 86
Setting the use of Virtual CINEMA FRONT.................................................................................................................... 87
Setting the distance between each speaker and the listening position........................................................... 87
Adjusting the volume of each speaker.......................................................................................................................... 87
Setting the equalizer............................................................................................................................................................ 88
Outputting test tones.......................................................................................................................................................... 88
Configuring the HDMI settings.............................................................. 89
Setting the use of HDMI Control...................................................................................................................................... 89
Setting the output of HDMI audio from the TV speaker......................................................................................... 89
Setting the use of HDMI Standby Through.................................................................................................................. 89
Setting the use of 4K upscaling of the HDMI video signal...................................................................................... 89
Setting the version of HDCP used on the HDMI input jacks.................................................................................. 90
Setting the audio jack used for TV audio input.......................................................................................................... 90
Linking the standby modes of the unit and the TV................................................................................................... 90
Setting the use of ARC......................................................................................................................................................... 90
Setting the use of SCENE link playback......................................................................................................................... 91
Configuring the sound settings............................................................. 92
Setting the use of Center Spread..................................................................................................................................... 92
Adjusting the center localization (broadening effect) of the front sound field.............................................. 92
Setting the use of Monaural Mix...................................................................................................................................... 92
Setting the adjustment method of the Lipsync function....................................................................................... 92
Adjusting the delay of the Lipsync function................................................................................................................ 93
Adjusting the volume of dialogue sound..................................................................................................................... 93
Adjusting the volume of dialogue sound during DTS:X™ playback.................................................................... 93
Adjusting the perceived height of dialogue sound.................................................................................................. 94
Setting the scale of the volume display........................................................................................................................ 94
Setting the dynamic range adjustment method....................................................................................................... 94
Setting the limit value of the volume............................................................................................................................. 95
Setting the initial volume for when the unit is turned on...................................................................................... 95
Adjusting the volume for Zone B in conjunction with the volume for Zone A............................................... 95
Configuring the power supply settings................................................ 96
Setting the amount of time for the auto-standby function................................................................................... 96
Setting the use of the eco mode...................................................................................................................................... 96
Configuring the function settings......................................................... 97
Automatically changing the input source names displayed on the front display......................................... 97
Manually changing the input source names displayed on the front display.................................................. 97
Setting input sources to be skipped when operating the INPUT key................................................................ 98
Adjusting the brightness of the front display............................................................................................................. 98
Preventing accidental changes to the settings.......................................................................................................... 98
Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.................... 99
Configuring the network settings....................................................... 100
Checking the network information of the unit........................................................................................................ 100
Setting the network connection method (Wired/Wireless)................................................................................ 100
Setting the network parameters automatically (DHCP)........................................................................................ 100
Setting the network parameters manually................................................................................................................ 101
Setting the MAC address filter........................................................................................................................................ 101
Setting the use of a Digital Media Controller............................................................................................................ 102
Setting the use of the Network Standby function.................................................................................................. 102
Setting the network name of the unit......................................................................................................................... 103
Setting the power interlock from the unit to MusicCast compatible devices.............................................. 103
Updating the firmware via the network..................................................................................................................... 103
En
4
Configuring the Bluetooth® settings.................................................. 104
Setting the use of Bluetooth®......................................................................................................................................... 104
Terminating the connection between a Bluetooth® device and the unit...................................................... 104
Setting the use of the Bluetooth® Standby function.............................................................................................. 104
Setting the use of audio transmission to a Bluetooth® device........................................................................... 105
Connecting the unit to a Bluetooth® device that receives transmitted audio............................................. 105
Configuring the language settings..................................................... 106
Setting the on-screen menu language....................................................................................................................... 106
Configuring the advanced settings (ADVANCED SETUP menu)....... 107
Basic operation of the ADVANCED SETUP menu..................................................................................................... 107
ADVANCED SETUP menu items..................................................................................................................................... 107
Changing the speaker impedance setting (SP IMP.).............................................................................................. 108
Selecting the remote control ID (REMOTE ID).......................................................................................................... 108
Changing the FM/AM tuning frequency setting (TU)............................................................................................ 108
Switching the video signal type (TV FORMAT)......................................................................................................... 108
Selecting the HDMI 4K signal format (4K MODE).................................................................................................... 109
Setting DTS Format Notification (DTS MODE).......................................................................................................... 109
Backuping and restoring all the settings (BKUP/RSTR)......................................................................................... 110
Restoring the default settings (INIT)............................................................................................................................. 111
Updating the firmware (UPDATE)................................................................................................................................. 111
Checking the firmware version (VERSION)................................................................................................................. 111
TROUBLESHOOTING 112
When any problem appears................................................................. 112
If trouble occurs, first check the following:................................................................................................................ 112
Power, system, or remote control trouble................................................................................................................. 112
Audio trouble....................................................................................................................................................................... 114
Video trouble........................................................................................................................................................................ 117
FM/AM radio trouble......................................................................................................................................................... 118
USB trouble........................................................................................................................................................................... 118
Network trouble.................................................................................................................................................................. 119
Bluetooth® trouble.............................................................................................................................................................. 121
Error indications on the front display................................................. 122
Error indications on the front display.......................................................................................................................... 122
APPENDIX 124
Updating the unit’s firmware via the network................................... 124
Firmware updates............................................................................................................................................................... 124
Updating the unit’s firmware via the network......................................................................................................... 125
Using wireless surround speakers (MusicCast Surround function)
................................................................................................................ 126
Using wireless surround speakers (MusicCast Surround function)................................................................... 126
Connecting to a network wirelessly.................................................... 128
Selecting a wireless network connection method.................................................................................................. 128
Setting up a wireless connection using the WPS button..................................................................................... 129
Setting up a wireless connection using an iOS device.......................................................................................... 129
Setting up a wireless connection by selecting from the list of available access points............................ 130
Setting up a wireless connection manually............................................................................................................... 131
Setting up a wireless connection by using the WPS PIN code........................................................................... 132
Input/output jacks and cables............................................................. 133
Video/audio jacks................................................................................................................................................................ 133
Video jacks............................................................................................................................................................................. 133
Audio jacks............................................................................................................................................................................ 133
Using presence speakers...................................................................... 134
Presence speaker layout................................................................................................................................................... 134
Installing the presence speakers in Front Height position.................................................................................. 134
Installing the presence speakers in Overhead position........................................................................................ 134
Using Dolby Enabled speakers as the presence speakers.................................................................................... 135
Glossary................................................................................................. 136
Glossary of audio information........................................................................................................................................ 136
Glossary of HDMI and video information................................................................................................................... 137
Glossary of network information................................................................................................................................... 138
Glossary of Yamaha technologies................................................................................................................................. 138
Supported devices and file formats.................................................... 139
Supported Bluetooth® devices....................................................................................................................................... 139
Supported USB devices..................................................................................................................................................... 139
Supported AirPlay devices............................................................................................................................................... 139
Supported file formats...................................................................................................................................................... 139
Video signal flow.................................................................................. 140
Video signal flow................................................................................................................................................................. 140
En
5
Additional information on HDMI......................................................... 141
HDMI Control and synchronized operations............................................................................................................ 141
Audio Return Channel (ARC)........................................................................................................................................... 142
HDMI signal compatibility............................................................................................................................................... 143
Trademarks........................................................................................... 144
Trademarks............................................................................................................................................................................ 144
Specifications........................................................................................ 145
Specifications........................................................................................................................................................................ 145
Default settings.................................................................................... 149
Default settings of the Option menu........................................................................................................................... 149
Default settings of the Setup menu............................................................................................................................. 149
Default settings of the ADVANCED SETUP menu.................................................................................................... 150
En
6
BEFORE USING THE UNIT
How to use this manual
How to use this manual
When reading this manual, mind the following items.
• Some features are not available in certain regions.
• Due to product improvements, specifications and
appearance are subject to change without notice.
• This manual mainly explains operations using the
menu displayed on the TV screen. Operations with
the TV screen menu are only available when your TV
is connected to the unit via HDMI.
• This manual explains operations using the supplied
remote control.
• This manual describes all the “iPod touch”, “iPhone”
and “iPad” as the “iPhone”. “iPhone” refers to “iPod
touch”, “iPhone” and “iPad”, unless otherwise
specified.
WARNING:
Indicates precautions for the possibility of death or
serious injury.
CAUTION:
Indicates precautions for the possibility of minor or
moderate injury.
NOTICE:
Indicates precautions for use to avoid the possibility of
malfunction/damage to the unit.
NOTE:
Indicates instructions and supplementary explanations
for optimum use.
Checking the accessories
Checking the accessories
Check that the following accessories are supplied with
the product.
£ AM antenna £ FM antenna
* One of the above is supplied
depending on the region of
purchase.
£ YPAO microphone £ Remote control
£ Batteries (AAA, R03, UM-4)
(x2)
£ Quick Start Guide
NOTE
Access the Yamaha Downloads site to download the latest Owner's
Manual and Quick Start Guide.
http://download.yamaha.com/
Using the remote control
Insert the batteries in the remote
control
Insert the batteries the right way round.
Operating range of the remote
control
Point the remote control at the remote control sensor on
the unit and remain within the operating range shown in
the following figure.
Within 6 m (20 ft)
30° 30°
En
7
FEATURES
What you can do with the unit
Supporting 2- to 7.1-channel
speaker system
According to the number of speakers that you are
using, you can enjoy your favorite acoustic spaces in
various styles.
• “Using 5.1.2-channel system” (p.19)
• “Using 7.1-channel system” (p.20)
• “Using 5.1-channel system” (p.21)
• “Using 3.1.2-channel system” (p.22)
• “Using Virtual CINEMA FRONT” (p.23)
• “Playing back music in multiple rooms” (p.43)
Automatically optimizing the
speaker settings (YPAO)
YPAO function detects speaker connections, measures
the distances from them to your listening position by
using YPAO microphone measurement, and then
automatically optimizes the speaker settings, such as
volume balance and acoustic parameters, to suit your
room (YPAO: Yamaha Parametric room Acoustic
Optimizer).
• “Optimizing the speaker settings automatically
(YPAO)” (p.
33)
Enjoying sound field effects with
much presence
The unit is equipped with a variety of sound programs
and surround decoders that allow you to enjoy
playback sources with your favorite sound mode (such
as sound field effect or stereo playback).
• “Enjoying 3D sound fields (CINEMA DSP
3D)” (p.38)
• “Enjoying sound field effects optimized for the type of
content”
(p.
39)
• “Enjoying sound field effects without surround
speakers (Virtual CINEMA DSP)” (p.39)
• “Enjoying surround sound with headphones (SILENT
CINEMA)” (p.39)
• “Enjoying original sound (straight decode)” (p.40)
• “Enjoying multichannel playback without sound field
effects (surround decoder)”
(p.
40)
• “Enjoying pure high fidelity sound (direct
playback)” (p.41)
• “Enhancing the bass (Extra Bass)” (p.41)
• “Playing back digitally compressed formats with
enriched sound (Compressed Music
Enhancer)”
(p.
42)
• “Enjoying Dolby Atmos
®
and DTS:X™” (p.42)
Wide variety of supported
content via network
When the unit is connected to a network, you can enjoy
the various kinds of content via network on the unit.
• “Playback of iTunes/iPhone music contents with
AirPlay” (p.58)
• “Playing back music stored on media servers (PCs/
NAS)” (p.60)
• “Selecting an Internet radio station” (p.62)
• “Listening to a streaming service” (p.63)
Playing back content of various
devices
A number of HDMI jacks and various input/output jacks
on the unit allow you to connect video devices (such as
BD/DVD players), audio devices (such as CD players),
Bluetooth devices (such as smartphones), game
consoles, USB storage devices, and other devices. You
can play back content of them.
• “Selecting a frequency for reception” (p.51)
• “Playback Bluetooth
®
device music on the
unit”
(p.56)
• “Playback of USB storage device contents” (p.59)
En
8
Useful functions
The unit is equipped with the various useful functions.
The SCENE function allows you to select the input
source and settings registered to the corresponding
scene, such as sound program and Compressed
Music Enhancer on/off, with just one touch. When the
unit is connected to an HDMI Control-compatible TV
with an HDMI cable, you can control the unit (such as
power and volume) with TV remote control operations.
• “Selecting the input source and favorite settings with
one touch (SCENE)”
(p.
64)
•
“Registering a favorite content as shortcut” (p.66)
• “HDMI Control and synchronized
operations”
(p.141
)
• “Audio Return Channel (ARC)” (p.142)
Additional Features
The unit is equipped with the function connected with
speakers wirelessly. You can enjoy audio played back
on the unit using Bluetooth speakers/headphones.
Also, using devices that support the MusicCast
Surround function, the surround speakers and
subwoofer can be wireless.
• “Enjoying audio using Bluetooth
®
speakers/
headphones” (p.57)
• “Using wireless surround speakers (MusicCast
Surround function)” (p.126
)
Useful applications
Application: “AV SETUP GUIDE”
AV SETUP GUIDE is an application that assists
you with cable connections between AV Receiver
and playback devices as well as AV Receiver
setup. This app guides you through the various
settings such as speaker connections, TV and
playback device connections and selecting the
speaker system.
For details, search for “AV SETUP GUIDE” on the App
Store or Google Play.
Application: “AV CONTROLLER”
AV CONTROLLER is an application that assists
you with various operations of AV Receiver
without the remote control. This app allows you
not only to control the unit’s power and volume
but also to select the input source and start/stop
playback.
For details, search for “AV CONTROLLER” on the App
Store or Google Play.
Application: "MusicCast
CONTROLLER"
MusicCast CONTROLLER is an application that
allows you to link a MusicCast compatible device
to other MusicCast compatible devices in other
rooms and play them back simultaneously. This
app lets you use your smartphone or other mobile
device instead of the remote control to easily
select music to play back as well as configure the
unit and MusicCast compatible devices.
For details, search for “MusicCast CONTROLLER” on
the App Store or Google Play.
En
9
Part names and functions
Part names and functions of the front panel
The part names and functions of the front panel are as follows.
PROGRAM
TONE CONTROL
STRAIGHT
(CONNECT)
AUX USB
AUDIO
5V 1A
SCENE
INPUT
PHONES
SILENT CINEMA
YPAO MIC
MEMORY
INFO (WPS)
PRESET
FM AM TUNING
DIRECT
VOLUME
TV
BD
DVD
NET
RADIO
2
3 4 6 7 8
51 09
A
B C D E F H I JG
1
z (power) key
Turns on/off (standby) the unit.
2
Standby indicator
Lights up when the unit is in standby mode under any of
the following conditions.
• HDMI Control is enabled (p.89)
• Standby Through is enabled (p.89)
• Network Standby is enabled (p.102)
• Bluetooth Standby is enabled (p.104)
3
YPAO MIC jack
For connecting the supplied YPAO microphone (p.33).
4
Remote control sensor
Receives remote control signals (p.7).
5
INFO (WPS) key
Selects the information displayed on the front display
(p.47).
Enters the wireless LAN connection setup (WPS button
configuration) by holding down for a few seconds (
p.129).
6
MEMORY
key
Registers FM/AM radio stations as preset stations (p.52).
Registers Bluetooth, USB, or network content as a shortcut
by holding down for a few seconds (p.
66
).
7
PRESET keys
Select a preset FM/AM radio station (p.52).
Recall Bluetooth, USB, or network content that is registered
as a shortcut (
p.
67).
8
FM and AM keys
Switch between FM and AM (p.51).
9
TUNING keys
Select the radio frequency (p.51).
:
Front display
Displays information (p.12).
A
DIRECT key
Enables/disables the direct playback mode (p.41).
B
PHONES jack
For connecting headphones.
C
INPUT keys
Select an input source.
D
TONE CONTROL key
Adjusts the level of high-frequency range (Treble) and low-
frequency range (Bass
) individually (p.70).
En
10
E
SCENE keys
Switch with one touch between multiple settings set using
the SCENE function. Also, turns on the unit when it is in
standby mode (p.64
).
F
PROGRAM keys
Select a sound program or a surround decoder (p.38).
G
STRAIGHT (CONNECT) key
Enables/disables the straight decode mode (p.40).
Enters the MusicCast network addition and the wireless
LAN setup by holding down for 5 seconds (p.
37
).
H
AUX jack
For connecting devices, such as portable audio players
(p.27).
I
USB jack
For connecting a USB storage device (p.59).
J
VOLUME knob
Adjusts the volume.
En
11
Part names and functions of the front display
The part names and functions of the front display are as follows.
-
R
es
Hi
YPAO
VOL.
PARTY
2
32
SB
ENHANCER
ECO
OUT
A
-
DRC
SLEEP
STEREO
TUNED
VOL.
SL
SW
SR
SBL SBR
MUTE VIRTUAL
ZONE
LINK
MASTER
BA
FPRFPL
1 5 7
9342 0 A6
CB CFED G
8
H
1
HDMI
Lights up when HDMI signals are being input or output.
OUT
Lights up when HDMI signals are being output.
2
LINK MASTER
Lights up when the unit is the master device of the
MusicCast network.
3
Firmware update indicator
Lights up when a firmware update is available via the
network.
4
Bluetooth indicator
Light up while the unit is connected to a Bluetooth device.
5
CINEMA DSP
Lights up when CINEMA DSP 3D (p.38) is working.
6
SLEEP
Lights up when the sleep timer is on.
7
STEREO
Lights up when the unit is receiving a stereo FM radio
signal.
TUNED
Lights up when the unit is receiving an FM/AM radio station
signal.
8
ZONE indicators
Indicate the zone to which the sound is output (p.45).
9
A-DRC
Lights up when Adaptive DRC (p.72) is working.
:
Volume indicator
Indicates the current volume.
A
VIRTUAL
Lights up when the virtual processing (p.39) is working.
B
ECO
Lights up when the eco mode (p.96) is enabled.
C
Cursor indicators
Indicate the remote control cursor keys currently
operational.
D
Information display
Displays the current status (such as input name and sound
mode name). You can switch the information by pressing
INFO (p.
47).
E
Wireless LAN indicator
Light up while the unit is connected to a wireless network
(p.128).
NOTE
This indicator may light up when the unit is added to the
MusicCast network. For details, see “Adding the unit to the
MusicCast network” (p.37).
F
ENHANCER
Lights up when Compressed Music Enhancer (
p.42) is
working.
G
Speaker indicators
Indicate speaker terminals from which signals are output.
A Front speaker (L)
S Front speaker (R)
D Center speaker
F Surround speaker (L)
G Surround speaker (R)
H Surround back speaker (L)
J Surround back speaker (R)
B Presence speaker (L)
N Presence speaker (R)
L Subwoofer
H
MUTE
Blinks when audio is temporarily muted.
En
12
Part names and functions of the rear panel
The part names and functions of the rear panel are as follows.
b
c e
f
g h
aa
ji
k
d
▪ The area around the video/audio output jacks is marked in white
on the actual product to prevent improper connections.
1
Wireless antennas
For a wireless (Wi-Fi) connection to a network (p.128) and
a Bluetooth connection (p.56).
2
HDMI OUT
jack
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p.
25). When using ARC, TV audio
signal can also be input through the HDMI OUT jack.
3
HDMI 1–4 jacks
For connecting to HDMI-compatible playback devices and
inputting video/audio signals (p.26).
4
ANTENNA
jacks
For connecting to FM and AM antennas (p.28).
5
NETWORK jack
For a wired connection to a network (p.29).
6
Power cable
For connecting to an AC wall outlet (p.30).
7
AV jacks
AUDIO jacks
For connecting to video/audio playback devices and
inputting video/audio signals (
p.26).
8
MONITOR OUT
jack
For connecting to a TV and outputting video signals
(p.25).
9
SUBWOOFER PRE OUT 1–2 jacks
For connecting to a subwoofer (with built-in amplifier)
(p.
18
).
:
SPEAKERS terminals
For connecting to speakers (p.15).
A
VOLTAGE SELECTOR
(Taiwan, Brazil and Central and South America models
only)
Selects the switch position according to your local voltage
(p.30).
En
13
Part names and functions of the remote control
The part names and functions of the supplied remote control are as follows.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER
BASS
INPU T
BD
DVD
TV
S C ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NE T
NET
BLUETOOTH
3
4
5
7
8
6
1
0
B
C
D
E
A
9
2
1
Remote control signal transmitter
Transmits infrared signals.
2
z (receiver power) key
Turns on/off (standby) the unit.
3
SLEEP key
Pressing this key repeatedly will specify the time (120 min,
90 min, 60 min, 30 min, off), in which the unit switches to
the standby mode.
4
ZONE switch
Changes the zone that is controlled by the remote control
(p.
44
).
5
SCENE keys
Switch with one touch between multiple settings set using
the SCENE function. Also, turn on the unit when it is in
standby mode (p.64
).
6
Sound mode keys
Select a sound mode (p.38).
7
Input selection keys
Select an input source for playback.
NOTE
Presses NET repeatedly to select a desired network source.
8
SETUP key
Displays the setup menu (p.79).
9
Menu operation keys
Operates the menu.
9:ABC External device operation keys
Let you perform playback operations when “USB” or “NET”
is selected as the input source, or control playback of the
HDMI Control-compatible playback device.
NOTE
▪ The playback devices must support HDMI Control. Some
HDMI Control-compatible devices cannot be used.
▪ You can assign the unit's functions to the RED/GREEN/
YELLOW/BLUE keys (p.99).
A
Playback operation keys
Controls playback of the external device.
B
VOLUME keys
Adjust the volume.
C
MUTE key
Mutes the audio output.
D
OPTION key
Displays the option menu (p.68).
E
DISPLAY key
Turns on/off the browse screen, playback screen, etc.
En
14
PREPARATIONS
1 Connecting speakers
Names and functions of speakers
The names and functions of speakers connected to the unit are as follows.
4
1
2
9 9
E R
5
6 7
3
10° to 30° 10° to 30°
0.5 to 1 m
(1.6 to 3.3 ft)
0.5 to 1 m
(1.6 to 3.3 ft)
1.8 m (5.9 ft) 1.8 m (5.9 ft)
0.3 m (1 ft) or more
NOTE
Use this diagram as a reference for the ideal speaker layout for the unit. Your speaker layout does not need
to match the diagram exactly, since the YPAO function can be used to automatically optimize the speaker
settings (such as distances) to suit the actual speaker layout.
Speaker type Abbr. Function
Front (L/R)
1/2
Produce front channel sounds (stereo sounds).
Center
3
Produces center channel sounds (such as movie dialogue
and vocals).
Surround (L/R)
4/5
Produce surround channel sounds. Surround speakers
also produce surround back channel sounds when no
surround back speakers are connected.
Surround back (L/R)
6/7
Produce surround back channel sounds.
Presence (L/R)
E/R
Produce CINEMA DSP 3D effect sounds or heights
channel sounds of Dolby Atmos and DTS:X contents.
Subwoofer
9
Produces LFE (low-frequency effect) channel sounds and
reinforces the bass parts of other channels.
NOTE
The unit provides three layout patterns for presence speakers. You can choose a layout pattern that suits
your listening environment.
▪ Front Height
▪ Overhead
▪ Dolby Enabled SP
En
15
Speaker systems and speakers to be connected
Select the speaker layout for the number of speakers that you are using and place the
speakers and subwoofer in your room.
Speaker type
Speaker system
(the number of channels)
7.1/5.1.2 5.1 2.1
Front (L/R) 1/2
Center 3
Surround (L/R) 4/5
*3
Surround back (L/R) 6/7
*1
Presence (L/R) E/R
*2 *4
Subwoofer 9
If you have seven speakers, use two of them as surround back speakers (*1) or
presence speakers (*2).
If you have five speakers, use two of them as surround speakers (*3) or presence
speakers (*4).
NOTE
▪ “5.1.2-channel” denotes “standard 5.1-channel plus 2 for overhead speaker channels”.
▪ When using surround back speakers, be sure to connect the surround back left and right speakers. Using
only one surround back speaker was discontinued.
▪ You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to
the unit output the same sounds.
Speaker requirements
Speakers and subwoofers to be connected to the unit must meet the following
requirements:
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When
connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For
details, see the following:
– “Setting the speaker impedance” (p.17)
• (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6 Ω.
• Use a subwoofer with built-in amplifier.
NOTE
▪ Prepare the number of speakers according to your speaker system.
▪ Be sure to connect the front left and right speakers.
En
16
Setting the speaker impedance
(U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to “6 Ω MIN”.
1
Before connecting speakers, connect the power cable to an AC
wall outlet.
2
While holding down STRAIGHT on the front panel, press z
(power).
(power)
z
STRAIGHT
3
Check that “SP IMP.” is displayed on the front display.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
SP IMP.••8¬MIN
4
Press STRAIGHT to select “6 Ω MIN”.
5
Press z (power) to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
Cable requirements
Use the following types of commercially-available cables to connect speakers to the
unit:
Speaker cables (the number of speakers
required)
Audio pin cable (for connecting a subwoofer)
–
+
–
+
How to connect speakers
n
Connecting the speaker
Connect a speaker cable between the negative (–) terminal of the unit and the
negative (–) terminal of the speaker, and between the positive (+) terminal of the unit
and the positive (+) unit of the speaker.
NOTICE
When connecting the speaker cables, take notice of the following:
▪ Prepare speaker cables in a place away from the unit, to avoid accidentally dropping wire strands into
the unit's interior which could result in a short circuit or malfunction of the unit.
▪ Improper connecting of the speaker cables may cause a short circuit and also damage the unit or the
speakers.
– Twist the bare wires of the speaker cables firmly together.
– Do not let the bare wires of the speaker cable touch one another.
– Do not let the bare wires of the speaker cable come into contact with the unit’s metal parts (rear panel
and screws).
En
17
NOTE
▪ Remove the unit’s power cable from an AC wall outlet before connecting the speakers.
▪ Be sure to connect the front left and right speakers.
▪ (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers,
set the unit’s speaker impedance to “6
Ω MIN”. For details, see the following:
–
“Setting the speaker impedance” (p.17)
1
Remove approximately 10 mm (3/8”) of insulation from the ends of
the speaker cable, and twist the bare wires of the cable firmly
together.
2
Loosen the speaker terminal.
3
Insert the bare wires of the cable into the gap on the side (upper
right or bottom left) of the terminal.
4
Tighten the terminal.
FRONT
aa
b
d
c
+ (red)
- (black)
This completes the connection.
NOTE
▪ If “Check SP Wires” appears on the front display when the unit is turned on, turn off the unit, and then
confirm that the speaker cables are not short circuited.
▪ (U.S.A., Canada, China, Taiwan, Brazil, Central and South America and General models only)
When using a banana plug, tighten the speaker terminal and insert a banana plug into the end of the
terminal.
FRONT
a
b
Banana plug
n
Connecting the subwoofer
Use an audio pin cable to connect the subwoofer.
NOTE
Unplug the power cables of the unit and subwoofer from the AC wall outlets before connecting the
subwoofer.
AUDIO 3
2
1
Audio pin cable
En
18
How to place speakers (speaker systems)
n
Using 5.1.2-channel system
To have a full effect of Dolby Atmos or DTS:X contents, we recommend this speaker
system. The presence speakers produce a natural 3-dimensional sound field including
overhead.
NOTE
▪ When installing the presence speakers on the ceiling above the listening position, or when using Dolby
Enabled speakers as the presence speakers, the presence speaker layout settings must be changed. For
details, see the following:
– “Setting the layout of the presence speakers” (p.86)
▪ You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to
the unit output the same sounds.
n
For Front Height of the presence speakers layout
4
1
2
9 9
E R
5
3
10° to 30° 10° to 30°
0.5 to 1 m
(1.6 to 3.3 ft)
0.5 to 1 m
(1.6 to 3.3 ft)
1.8 m (5.9 ft) 1.8 m (5.9 ft)
n
For Overhead of the presence speakers layout
4
1
2
9 9
5
3
E R
10° to 30°
10° to 30°
3
RE45
21
9 9
En
19
n
Using 7.1-channel system
This speaker system allows you to enjoy extended surround sound using the surround
back speakers.
NOTE
You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to
the unit output the same sound.
4
1
2
9 9
5
6 7
3
10° to 30° 10° to 30°
0.3 m (1 ft) or more
3
7645
21
9 9
En
20
n
Using 5.1-channel system
This is a basic speaker layout recommended for enjoying surround sound.
NOTE
You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to
the unit output the same sounds.
4
1
2
9
5
3
10° to 30° 10° to 30°
3
45
21
9
En
21
n
Using 3.1.2-channel system
We recommend this speaker layout when you cannot place speakers in the back of
the room. You can also enjoy Dolby Atmos or DTS:X content with this speaker system.
NOTE
▪ When installing the presence speakers to the ceiling above the listening position or using the Dolby
Enabled speakers as the presence speakers, configure your presence speaker layout. For details, see the
following:
– “Setting the layout of the presence speakers” (p.86)
▪ You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to
the unit output the same sound.
1
2
9
E R
3
0.5 to 1 m
(1.6 to 3.3 ft)
0.5 to 1 m
(1.6 to 3.3 ft)
1.8 m (5.9 ft) 1.8 m (5.9 ft)
3
RE
21
9
En
22
n
Using Virtual CINEMA FRONT
This speaker layout is recommended if you cannot place speakers in the back of the
room.
NOTE
▪ To use Virtual CINEMA FRONT, the speaker configuration settings must be changed. For details, see the
following:
– “Assigning speaker configuration” (p.32)
– “Setting the use of Virtual CINEMA FRONT” (p.87)
▪ You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to
the unit output the same sounds.
1
2
9
3
54
3
45
21
9
En
23
Connecting front speakers that support bi-amp
connections
You can connect the front speakers that support bi-amp connections.
To enable the bi-amp function, configure the necessary speaker settings. For details,
see the following:
• “Assigning speaker configuration” (p.32)
• “Setting your speaker system” (p.83)
NOTICE
▪ Before making bi-amp connections, remove any brackets or cables that connect a woofer with a
tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp
connections, make sure that the brackets or cables are connected before connecting the speaker
cables.
1 2
The unit (rear)
NOTE
▪ The following speakers cannot be connected simultaneously.
– Presence speakers
– Surround back speakers
– Zone B speakers
– Bi-amp speakers
▪ The FRONT terminals and SURROUND BACK/PRESENCE/BI-AMP/ZONE B terminals output the same
signals.
En
24
2 Connecting a TV
HDMI connection with a TV
Connect a TV to the unit with an HDMI cable. If you connect a TV that supports ARC to
the unit, you can output video/audio to the TV or input TV audio to the unit.
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
(ARC)
The unit (rear) HDMI OUT jack
HDMI input
TV
About Audio Return Channel (ARC)
▪ ARC allows audio signals to travel both ways with a single HDMI cable. To use ARC, connect to the TV
using an HDMI cable that supports ARC.
NOTE
▪ If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control.
▪ To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details on the
settings, see the following:
– “HDMI Control and synchronized operations” (p.141)
– “Audio Return Channel (ARC)” (p.142)
▪ If your TV does not support Audio Return Channel (ARC), a digital optical cable connection between the
TV and the unit is needed.
VIDEO (composite video) connection with a TV
Connect a TV to the unit with a video pin cable and a digital optical cable.
MONITOR OUT
VIDEO
OPTICAL
O O
V
V
The unit (rear)
AUDIO 1 (OPTICAL) jack
MONITOR OUT (VIDEO) jack
Video input
(composite video)
Audio output
(digital optical)
TV
NOTE
▪ If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV. For details, see the following:
– “Video signal flow” (p.140)
▪ Operations with TV screen are available only when your TV is connected to the unit via HDMI.
▪ A digital optical cable connection allows audio from the TV to be played back on the unit. A digital optical
cable connection is not needed in the following case:
– If you will receive TV broadcasts only from the set-top box
En
25
3 Connecting playback devices
HDMI connection with a video device such as a
BD/DVD player
Connect a video device to the unit with an HDMI cable.
HDMI
HDMI
HDMI
The unit (rear)
HDMI OUT jack
HDMI 1–4 jacks
Video device
NOTE
To watch video input to the HDMI 1–4 jacks, you need to connect your TV to the HDMI OUT jack of the unit.
For details, see the following:
▪ “HDMI connection with a TV” (p.25)
Connection other than HDMI with a playback device
n
VIDEO (composite video) connection with a video
device
Connect a video device to the unit with a video pin cable and an audio cable (digital
coaxial or stereo pin cable). Choose a set of input jacks (on the unit) depending on the
audio output jacks available on your video device.
Output jacks on video device
Input jacks on the unit
Video Audio
Composite video
Digital coaxial AV 1 (VIDEO + COAXIAL)
Analog stereo AV 2–3 (VIDEO + AUDIO)
Digital optical
You need to change the combination
of video/audio input jacks (p.74).
R
L
COAXIAL
VIDEO
COAXIAL
VIDEO
AV 1
C C
L
R
L
R
V
V
The unit (rear)
AV 1 (COAXIAL) jack or AV 2–3
(AUDIO) jacks
AV 1–3 (VIDEO) jacks
Video output
(composite video)
Audio output
(digital coaxial or analog
stereo)
Video device
NOTE
▪ If you connect a video device to the unit via composite video connection, you need to connect your TV to
the MONITOR OUT (VIDEO) jack of the unit. For details, see the following:
– “VIDEO (composite video) connection with a TV” (p.25)
▪ If the combination of video/audio input jacks available on the unit does not match your video device,
change its combination according to the output jacks of your device. For details, see the following:
– “Combining audio of another input source with video of the current input source” (p.74)
En
26
n
AUDIO connection with an audio device such as a CD
player
Connect audio devices such as CD players and MD players to the unit. Depending on
the audio output jacks available on your audio device, choose one of the following
connections.
NOTE
To use a turntable, a commercially-available phono equalizer amplifier is required. Connect the output of the
phono equalizer amplifier to the unit.
Audio output jacks on audio device Audio input jacks on the unit
Digital optical AUDIO 1 (OPTICAL)
Digital coaxial
AUDIO 2 (COAXIAL)
AV 1 (COAXIAL)
Analog stereo
AUDIO 3 (AUDIO)
AV 2–3 (AUDIO)
R
L
COAXIAL
OPTICAL
C C
L
R
L
R
O O
The unit (rear)
AV 1–3 jacks
AUDIO 1–3 jacks
Audio output
(either digital optical, digital coaxial,
or analog stereo)
Audio device
NOTE
“AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO 1
jacks, use “TV Audio Input” in the “Setup” menu to change the TV audio input assignment. To use the SCENE
function, you also need to change the input assignment for SCENE (TV). For details, see the following:
▪ “Setting the audio jack used for TV audio input” (p.90)
▪ “Registering a scene” (p.65)
Connecting to the jack on the front panel
Use the AUX jack on the front panel to temporarily connect devices such as portable
audio players to the unit.
CAUTION
▪ Before making a connection, stop playback on the device and turn down the volume on the unit. The
volume may be unexpectedly loud, and this could result in damage to hearing.
NOTE
You need to prepare the audio cable that matches the output jacks on your device.
PROGRAM
TONE CONTROL
STRAIGHT
(CONNECT)
AUX USB
AUDIO
5V 1A
INPUT
TV
BD
DVD
NET
RADIO
The unit (front)
Portable audio player
If you select “AUX” as the input source by pressing INPUT, the audio played back on
the device will be output from the unit.
En
27
4 Connecting the FM/AM antennas
Connecting the FM/AM antennas
Connect the supplied FM/AM antennas to the unit.
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
The unit (rear)
FM antenna
AM antenna
Assembling and connecting the AM antenna
ReleaseHold down Insert
NOTE
▪ Unwind only the length of cable needed from the AM antenna unit.
▪ The wires of the AM antenna have no polarity.
En
28
5 Preparing for connecting to a network
Preparing for connecting to a network
The unit supports wired and wireless connections. Select a connection method
according to your network environment.
If you are using a router that supports DHCP in the wired connection, you do not need
to configure any network settings for the unit.
NOTE
You need to configure the network settings if your router does not support DHCP or if you want to configure
the network parameters manually. For details, see the following:
▪ “Setting the network parameters manually” (p.101)
To connect the unit to a wireless network, select one of the following methods to
configure the wireless network settings.
l Method using the MusicCast setting
When adding the unit to the MusicCast network, you can also configure the unit’s
wireless network settings at once. If you use MusicCast CONTROLLER, we
recommend the wireless connection to MusicCast network. For details, see the
following:
– “Adding the unit to the MusicCast network” (p.37)
l Other methods
For details, see the following:
– “Selecting a wireless network connection method” (p.128)
Connecting a network cable (wired connection)
Connect the unit to your router with a commercially-available STP network cable
(CAT-5 or higher straight cable).
You can enjoy Internet radio or music files stored on media servers, such as PCs and
Network Attached Storage (NAS), on the unit.
LAN
WAN
Network Attached Storage
(NAS)
Internet
Modem
Wireless
router
PC
Network cable
The unit (rear)
NOTE
▪ If you are using a router that supports DHCP, you do not need to configure any network settings for the
unit, as the network parameters (such as the IP address) will be assigned automatically to it. You only
need to configure the network settings if your router does not support DHCP or if you want to configure the
network parameters manually. For details, see the following:
– “Setting the network parameters manually” (p.101)
▪ You can check whether the network parameters (such as IP address) are properly assigned to the unit.
For details, see the following:
– “Checking the network information of the unit” (p.100)
En
29
Preparing wireless antennas (wireless connection)
Stand the wireless antennas upright for connecting to the wireless network or a
Bluetooth device wirelessly.
For information on how to connect the unit to a wireless network, see the following:
• “Preparing for connecting to a network” (p.29)
NOTICE
▪ Do not apply excessive force on the wireless antenna. Doing so may damage the antenna.
6 Plugging in the power cable
Plugging in the power cable
WARNING
(Taiwan, Brazil and Central and South America models only)
Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall
outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential
fire hazard.
Before plugging in the power cable
Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110–
120/220–240 V, 50/60 Hz.
The unit (rear)
VOLTAGE SELECTOR
After all the connections are complete, plug in the power cable.
The unit (rear)
To an AC wall outlet
En
30
7 Selecting the on-screen menu language
Selecting the on-screen menu language
Select the desired on-screen menu language.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
NOTE
When you turn on the unit for the first time, a message regarding the network setup appears. You
can switch the language on this message screen.
3
Press SETUP.
4
Use the cursor keys to select “Language” and press ENTER.
5
Use the cursor keys to select the desired language.
6
To exit from the menu, press SETUP.
This completes the necessary settings.
NOTE
The information on the front display is provided in English only.
En
31
8 Configuring the necessary speaker settings
Assigning speaker configuration
If you use any of the following speaker configurations, perform the following procedure
to configure the corresponding speaker settings manually before performing YPAO.
• Using the surround back speakers
• Using the bi-amp connection (playing back more high-quality sounds with bi-amp
connections)
• Using the Zone B speakers
• Using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT)
• Using the presence speakers for Dolby Atmos or DTS:X playback
NOTE
For details on the speaker configurations, see the following:
▪ “Using 7.1-channel system” (p.20)
▪ “Connecting front speakers that support bi-amp connections” (p.24)
▪ “Playing back music in multiple rooms” (p.43)
▪ “Using Virtual CINEMA FRONT” (p.23)
▪ “Presence speaker layout” (p.134)
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
NOTE
If you turn on the unit for the first time, the message regarding the network setup appears. For now,
press RETURN and proceed to Step 3.
3
Press SETUP.
4
Use the cursor keys to select “Speaker” and press ENTER.
5
Use the cursor keys to select “Configuration” and press ENTER.
6
Configure the corresponding speaker settings.
▪ Using surround back speakers, bi-amp connections or Zone B speakers,
select your speaker system in “
Power Amp Assign
”. For details, see the
following:
– “Setting your speaker system” (p.83)
▪ Using the surround speakers for front 5.1-channel system (Virtual
CINEMA FRONT), select “On” in “Virtual CINEMA FRONT”. For details,
see the following:
– “Setting the use of Virtual CINEMA FRONT” (p.87)
▪ Using the presence speakers for Dolby Atmos or DTS:X playback, select
“Presence” in “
Power Amp Assign
”, and then select your presence
speaker layout in “Layout”. For details, see the following:
– “Setting the layout of the presence speakers” (p.86)
7
To exit from the menu, press SETUP.
This completes the speaker settings.
En
32
Optimizing the speaker settings automatically
(YPAO)
The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker
connections, measures the distances from them to your listening position(s), and then
automatically optimizes the speaker settings, such as volume balance and acoustic
parameters, to suit your room.
NOTE
▪ Use YPAO after connecting a TV and speakers to the unit.
▪ Configure the corresponding speaker settings manually before performing YPAO. For details on the
settings, see the following:
– “Assigning speaker configuration” (p.32)
▪ During the measuring process, test tones are output at high volume, and you cannot adjust the volume.
▪ During the measuring process, keep the room as quiet as possible and do not stand between the
speakers and the YPAO microphone for accurate measurement.
▪ Do not connect headphones.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
3
Turn on the subwoofer and set the volume to half. If the crossover
frequency is adjustable, set it to maximum.
VOLUME HIGH CUT
CROSSOVER/
MIN MAXMIN MAX
9
4
Place the YPAO microphone at your listening position and
connect it to the YPAO MIC jack on the front panel.
Place the YPAO microphone at your listening position (same height as
your ears). We recommend the use of a tripod as a microphone stand.
You can use the tripod screws to stabilize the microphone.
1 2
3
9
4 5
The unit (front)
Ear height
The following screen appears on the TV.
1
1
Setting of “Power Amp Assign” in the “Setup” menu
En
33
5
To start the measurement, use the cursor keys to select “Start”
and press ENTER.
The measurement will start in 10 seconds. Press ENTER to start the
measurement immediately.
The following screen appears on the TV when the measurement finishes.
1
2
3
4
1
The number of speakers (front side/rear side/subwoofer)
2
Speaker distance (nearest/farthest)
3
Adjustment range of speaker output level
4
Warning message (if available)
NOTE
▪ To stop the measurement temporarily, press RETURN.
▪ If any error message (such as E-1) or warning message (such as W-1) appears, see the
following:
– “Error messages from YPAO” (p.35)
– “Warning messages from YPAO” (p.36)
▪ A speaker with a problem is indicated by blinking of the speaker indicators in the front display.
▪ If multiple warnings are given (when operating with the front display), use the cursor keys to
check the other warning messages.
6
Confirm the results displayed on the screen and press ENTER.
7
Use the cursor keys to select “SAVE” and press ENTER.
The adjusted speaker settings are applied.
NOTE
To finish the measurement without applying the result, select “CANCEL”.
8
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
NOTICE
▪ The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be
exposed to direct sunlight or high temperatures (such as on top of AV equipment).
En
34
Error messages from YPAO
If any error message is displayed during the measurement, resolve the problem and
perform YPAO again.
Error message
TV screen
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SBL SB SBR
FPL
MUT E VIRTU AL
E-5:NOISY
VOL .
SL
SW
SR
E-9:CANCEL
Front display
Error message Cause Remedy
E-1:No Front SP
(E-1:NO FRNT SP)
Front speakers are not
detected.
Exit YPAO, turn off the unit, and then
check the speaker connections.
E-2:No Sur. SP
(E-2:NO SUR SP)
One of the surround
speakers cannot be
detected.
E-3:No F.PRNS SP
(E-3:NO FPR SP)
One of the presence
speakers cannot be
detected.
E-4:No Sur. Back SP
(E-4:NO SUR BACK SP)
One of the surround back
speaker cannot be
detected.
E-5:Noisy
(E-5:NOISY)
The noise is too loud.
Keep the room quiet and retry YPAO. If
you select “
PROCEED”, YPAO takes the
measurement again and ignores any
noise detected.
E-6:Check Sur.
(E-6:CHECK SUR)
Surround back speakers are
connected, but no surround
speakers are connected.
Surround speakers need to be
connected in order to use surround back
speakers. Exit YPAO, turn off the unit,
and then reconnect the speakers.
E-7:No MIC
(E-7:NO MIC)
The YPAO microphone has
been removed.
Connect the YPAO microphone to the
YPAO MIC
jack firmly and retry YPAO.
E-8:No Signal
(E-8:NO SIGNAL)
The YPAO microphone
cannot detect test tones.
Connect the YPAO microphone to the
YPAO MIC
jack firmly and retry YPAO. If
this error occurs repeatedly, contact the
nearest authorized Yamaha dealer or
service center.
E-9:User Cancel
(E-9:CANCEL)
The measurement has been
canceled.
Retry or exit YPAO as necessary.
E-10:Internal Err.
(
E-10:INTERNAL)
An internal error has
occurred.
Exit YPAO, and turn off and on the unit. If
this error occurs repeatedly, contact the
nearest authorized Yamaha dealer or
service center.
NOTE
▪ Text in parentheses denotes indicators on the front display.
▪ To exit the YPAO measurement for resolving the problem, use the cursor keys to select “EXIT” and press
ENTER.
▪ For the error messages E-5 and E-9 only, you can proceed with the current YPAO measurement. Press
ENTER, and then use the cursor keys to select “PROCEED” and press ENTER.
▪ To retry the YPAO measurement from beginning, press
ENTER, and then use the cursor keys to select
“RETRY” and press ENTER.
En
35
Warning messages from YPAO
If a warning message is displayed after the measurement, you can still apply the
measurement results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the
optimal speaker settings.
Warning message
TV screen
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
SL
SW
SR
W-1:PHASE
Problem speaker (blinks)
Front display
Warning message Cause Remedy
W-1:Out of Phase
(W-1:PHASE)
A speaker cable may be
connected with the reverse
polarity (+/-).
Check the cable connections (+/-) of the
problem speaker.
If the speaker is connected incorrectly:
Turn off the unit, reconnect the speaker
cable.
If the speaker is connected correctly:
Depending on the type of speakers or
room environment, this message may
appear even if the speakers are
connected correctly. In this case, you
can ignore the message.
W-2:Over Distance
(W-2:DISTANCE)
A speaker is placed more
than 24 m (80 ft) from the
listening position.
Exit YPAO, turn off the unit, and place the
problem speaker within 24 m (80 ft) of the
listening position.
W-3:Level Error
(W-3:LEVEL)
There are significant volume
differences between the
speakers.
Check the usage environment and cable
connections (+/-) of each speaker, and
the volume of the subwoofer. If there is
any problem, exit YPAO, turn off the unit,
and then reconnect speaker cable or
correct the speaker positions. We
recommend using the same speakers or
speakers with specifications that are as
similar as possible.
NOTE
Text in parentheses denotes indicators on the front display.
En
36
9 Setting MusicCast
What is MusicCast
MusicCast is a brand new wireless musical solution from Yamaha, allowing you to
share music among all of your rooms with a variety of devices. You can enjoy music
from your smartphone, PC, NAS drive and music streaming service anywhere in your
house with one easy-to-use application. For more details and a lineup of MusicCast
compatible products, refer to the following site:
http://www.yamaha.com/musiccast/
• Seamlessly control all MusicCast compatible devices with the dedicated application
“MusicCast CONTROLLER”.
• Link a MusicCast compatible device to another device in a different room and play
them back simultaneously.
• Play back music from music streaming services. (The compatible music streaming
services may differ depending on your region and product).
• Configure wireless network settings of MusicCast compatible devices.
Using MusicCast CONTROLLER
To use the network features on the MusicCast compatible device, you need the
dedicated application “MusicCast CONTROLLER” for the operation. Search for the
free application “MusicCast CONTROLLER” on the App Store or Google Play and
install it to your device.
Adding the unit to the MusicCast network
Perform the following procedure to add the unit to the MusicCast network. You can
also configure the unit’s wireless network settings at once.
NOTE
The SSID and security key for your network will be needed.
1
Tap the “MusicCast CONTROLLER” application icon on your
mobile device and tap “Setup”.
NOTE
If you have already connected other MusicCast compatible devices to the network, tap “Settings”
and then “Add New Device”.
2
Operate the “MusicCast CONTROLLER” application following the
on screen instructions, then hold down
CONNECT on the front
panel of the unit for 5 seconds.
CONNECT
3
Operate the “MusicCast CONTROLLER” application following the
onscreen instructions to set up the network.
This completes adding the unit to the MusicCast network and the network settings.
NOTE
▪ AirPlay and DSD audio cannot be delivered.
▪ When the direct playback mode is enabled, input sources other than the network sources, Bluetooth and
USB cannot be delivered.
▪ If you configure the unit's wireless settings with this method, the wireless LAN indicator of the front display
lights up when the unit is connecting to a network (even if a wired connection is used).
▪ You can interlock the power of MusicCast devices with the power of the unit (the MusicCast master). For
details on the settings, see the following:
– “Setting the power interlock from the unit to MusicCast compatible devices” (p.103)
En
37
ENJOYING SOUND
Enjoying sound field effects
Select your favorite sound mode
The unit is equipped with a variety of sound programs and surround decoders that
allow you to enjoy playback sources with your favorite sound mode (such as sound
field effect or stereo playback).
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
PROGRAM
STRAIGHT
ENHANCER
BASS
BD
DVD
TV
S C ENE
RADIO
SLEEP
DIRECT
ZONE A ZONE B
NE T
BD
DV
D
TV
S C EN
E
R
ADIO
SLEEP
ZONE
A Z
O
NE
B
NE T
STRAIGHT
D
IRECT
ENHANCER
BASS
PROGRAM
NOTE
▪ The sound mode can be applied separately to each input source.
▪ You can check which speakers are currently outputting sound by looking at the speaker indicators on the
front display.
▪ You can assign the unit's functions of sound mode to the RED/GREEN/YELLOW/BLUE keys of the remote
control. For details, see the following:
– “Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control” (p.99)
Enjoying 3D sound fields (CINEMA DSP 3D)
The unit is equipped with a variety of sound programs that utilize Yamaha's original
DSP technology (CINEMA DSP 3D). It allows you to easily create sound fields like
actual movie theaters or concert halls in your room and enjoy natural three-
dimensional sound fields.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
PARTY
TUNED
ZONE
3 B2 A
FPR
SBL SB SBR
FPL
MUT E VIRTU AL
SLEEP
STEREO
VOL .
SL
SW
SR
Sci-Fi
Sound program category
“CINEMA DSP” lights up
Sound program
NOTE
▪ You can adjust the sound field effect level. For details, see the following:
– “Adjusting the sound field effect level” (p.72)
▪ The sound mode can be applied separately to each input source.
En
38
Enjoying sound field effects optimized for the type of
content
The unit is equipped with a variety of sound programs.
You can enjoy playback sources with your favorite sound mode, such as with a sound
field effect added or with stereo playback.
• We recommend a sound program in the “MOVIE” category to enjoy video content.
• We recommend a sound program in the “MUSIC” category to enjoy music content.
• We recommend a sound program in the “STEREO” category to enjoy stereo
playback.
For details on the sound programs, see the following:
• “Selecting sound programs” (p.70)
NOTE
You can select a sound program by pressing PROGRAM.
Enjoying sound field effects without surround
speakers (Virtual CINEMA DSP)
If you select one of the sound programs (except 2ch Stereo and 7ch Stereo) when no
surround speakers are connected, the unit automatically creates the surround sound
field using the front speakers.
NOTE
When Virtual CINEMA DSP is working, “VIRTUAL” lights up on the front display.
Enjoying surround sound with 5 speakers placed in
front (Virtual CINEMA FRONT)
You can enjoy the surround sound even when the surround speakers are placed in
front.
When “Virtual CINEMA FRONT” in the “Setup” menu is set to “On”, the unit creates the
virtual surround speakers in the rear side to allow you to enjoy multichannel surround
sound with the 5 speakers placed in the front.
NOTE
▪ For details on the settings, see the following:
– “Setting the use of Virtual CINEMA FRONT” (p.87)
▪ When Virtual CINEMA FRONT is working, “VIRTUAL” lights up on the front display.
Enjoying surround sound with headphones (SILENT
CINEMA)
You can enjoy surround or sound field effects, like a multichannel speaker system, with
stereo headphones by connecting the headphones to the PHONES jack and selecting
a sound program or a surround decoder.
En
39
Enjoying unprocessed playback
Enjoying original sound (straight decode)
When STRAIGHT is pressed and the straight decode mode is enabled, the unit
produces stereo sound from the front speakers for 2-channel sources such as CDs,
and produces unprocessed multichannel sounds for multichannel sources.
LINK
ECO
MASTER
OUT
2
A
-
DRC
ZONE
3 B2 A
FPR
SBL SB SBR
FPL
MUT E VIRTU AL
-
SLEEP
STEREO
PARTY
TUNED
R
es
Hi
YPAO
VOL.
ENHANCER
VOL .
SL
SW
SR
STRAIGHT
Each time you press the key, the straight decode mode is enabled or disabled.
Enjoying multichannel playback without sound field
effects (surround decoder)
Press PROGRAM to select “Sur.Decode”. The previously selected surround decoder is
selected. The surround decoder enables multichannel playback from 2-channel
sources without sound field effects.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
PROGRAM
STRAIGHT
ENHANCER
BASS
BD
DVD
TV
S C ENE
RADIO
SLEEP
DIRECT
ZONE A ZONE B
NE T
ST
RA
IGHT
ENHANCER
BA
SS
BD
DV
D
TV
S C EN
E
R
ADIO
SLEEP
DIRECT
ZONE
A Z
O
NE
B
NE T
PROGRAM
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
SBL SB SBR
MUT E VIRTU AL
VOL .
SL
SW
SR
†‡ Dsur
FPL FPR
“SUR. DECODE” appears
NOTE
▪ You cannot change the previously selected surround decoder by pressing PROGRAM. To change it, use
“Sur.Decode” in the “Option” menu. For details, see the following:
– “Selecting the surround decoder used in the program” (p.71)
▪ For details on each decoder, see the following:
– “Glossary of audio decoding format” (p.136)
▪ You can adjust the surround decoder parameters in “DSP Parameter” in the “Setup” menu. For details,
see the following:
– “Adjusting the center localization (broadening effect) of the front sound field” (p.92)
– “Setting the use of Center Spread” (p.92)
▪ The selected surround decoder may not work for some input sources.
▪ We recommend Dolby Surround while network streaming is Dolby contents.
▪ When the Dolby Surround decoder or the Neural:X decoder is selected, virtual surround processing (such
as Virtual CINEMA FRONT) does not work. For details, see the following:
– “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.39)
– “Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)” (p.39)
En
40
Enjoying pure high fidelity sound (direct playback)
When DIRECT is pressed and the direct playback mode is enabled, the unit plays
back the selected source with the least circuitry. It allows you to enjoy Hi-Fi sound
quality.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
SL
SW
SR
DIRECT
Each time you press the key, the direct playback mode is enabled or disabled.
NOTE
▪ When the direct playback mode is enabled, the following functions are not available.
– Selecting sound programs
– Using the Zone B function
– Adjusting the tone control
– Operating the on-screen “Setup” and “Option” menus
– Viewing information on the front display (when not in operation)
▪ When the direct playback mode is enabled, the front display may become dark.
Enjoying enhanced bass sound
Enhancing the bass (Extra Bass)
Press BASS to enable Extra Bass and enjoy enhanced bass sound, regardless of the
size of the front speakers and the presence or absence of a subwoofer.
Each time you press the key, Extra Bass is enabled or disabled.
NOTE
You can also use “Extra Bass” in the “Setup” menu to enable/disable Extra Bass. For details, see the
following:
▪ “Setting the use of Extra Bass” (p.86)
En
41
Enjoying enhanced compressed music
Playing back digitally compressed formats with
enriched sound (Compressed Music Enhancer)
Press ENHANCER to enable Compressed Music Enhancer and add depth and
breadth to the sound, allowing you to enjoy a dynamic sound close to the original
sound before it was compressed. This function can be used along with any other
sound modes.
LINK
ECO
MASTER
OUT
2
-
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SBL SB SBR
FPL
MUT E VIRTU AL
R
es
Hi
YPAO
VOL.
VOL .
SL
SW
SR
Enhancer On
ENHANCER
“ENHANCER” lights up
Each time you press the key, Compressed Music Enhancer is enabled or disabled.
NOTE
▪ Compressed Music Enhancer does not work on the following audio sources.
– Signals whose sampling frequency is over 48 kHz
– DSD audio
▪ You can also use “Enhancer” in the “Option” menu to enable/disable Compressed Music Enhancer. For
details, see the following:
– “Setting Compressed Music Enhancer” (p.73)
Enjoying Dolby Atmos® and DTS:X™
Enjoying Dolby Atmos® and DTS:X™
Playing back Dolby Atmos or DTS:X content creates realistic sound that comes from
every direction, including overhead. To receive the full effect of Dolby Atmos or DTS:X
content, we recommend a speaker system with presence speakers.
NOTE
For details on the speaker system with the presence speakers, see the following:
▪ “Using 5.1.2-channel system” (p.19)
About Dolby Atmos
®
▪ Dolby Atmos contents are decoded as Dolby TrueHD or Dolby Digital Plus in the following situations.
(Dolby Atmos PCM format is always decoded as Dolby Atmos.)
– Neither surround back nor presence speakers are used.
– Headphones are used (2-channel playback).
▪ When the Dolby Atmos decoder is selected, virtual surround processing (such as Virtual CINEMA
FRONT) does not work. For details, see the following:
– “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.39)
– “Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)” (p.39)
About DTS:X™
▪ When DTS:X contents are played back, you can adjust the volume of dialogue sounds in “DTS
Dialogue Control” in the “
Setup” menu. For details, see the following:
– “Adjusting the volume of dialogue sound during DTS:X™ playback” (p.93)
▪ When the DTS:X decoder is selected, virtual surround processing (such as Virtual CINEMA FRONT)
does not work. For details, see the following:
– “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.39)
– “Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)” (p.39)
En
42
Enjoying music in multiple rooms
Playing back music in multiple rooms
The Zone A/B function allows you to play back an input source in the room where the
unit is installed (Zone A) and in another room (Zone B).
For example, you can turn on Zone A (turn off Zone B) when you are in the living room,
and turn on Zone B (turn off Zone A) when you are in the study room. Also, you can
turn on both zones when you want to enjoy the same input source in those rooms
simultaneously.
Living room (Zone A)
Study room (Zone B)
NOTE
▪ Multichannel sources are mixed down to 2 channels and output to the Zone B.
▪ The same input source is applied to both Zone A and Zone B.
▪ By default, the volume for Zone B changes in conjunction with the volume for Zone A. If there is volume
difference between Zone A/B, you can correct it, and also you can adjust the volume for Zone B
separately. For details, see the following:
– “Correcting volume difference between Zone A and Zone B” (p.45)
– “Adjusting the volume for Zone B separately” (p.45)
▪ You can automatically enable/disable the audio output to Zone A/B in conjunction with a scene selection.
For details, see the following:
– “Registering a scene” (p.65)
Connecting Zone B speakers
Connect the device that will be used in Zone B to the unit.
NOTICE
▪ Remove the unit’s power cable from the AC wall outlet before connecting speakers.
▪ Ensure that the bare wires of the speaker cable do not touch one another or come into contact with the
unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit,
“Check SP Wires” will appear on the front display when the unit is turned on.
Connect the speakers placed in Zone B to the unit with speaker cables.
To utilize the SURROUND BACK/PRESENCE/BI-AMP/ZONE B terminals for Zone B
speakers, set “Power Amp Assign” in the “Setup” menu to “Zone B” after connecting
the power cable to an AC wall outlet. For details, see the following:
• “Setting your speaker system” (p.83)
1 2
1 2
39
4 5
The unit (rear)
Zone A
Zone B
NOTE
The following speakers cannot be connected simultaneously.
▪ Presence speakers
▪ Surround back speakers
▪ Zone B speakers
▪ Bi-amp speakers
En
43
Operating the Zone B
Basic procedure for playing back music in Zone B is as follows.
1
Slide the Zone switch to “ZONE B”.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
PROGRAM
STRAIGHT
ENHANCER
BASS
BD
DVD
TV
S C ENE
RADIO
SLEEP
DIRECT
ZONE A ZONE B
NE T
PR
OG R
AM
ST
RA
IGHT
ENHANCER
BA
SS
BD
DV
D
TV
S C EN
E
R
ADIO
SLEEP
DIRECT
NE T
ZONE A
Z
ONE B
2
Press z (receiver power).
Each time you press the key, the ZONE B audio output is on or off.
ENHANCER
LINK
ECO
OUT
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
FPR
SBL SB SBR
FPL
MUT E VIRTU AL
MASTER
2
VOL .
SL
SW
SR
ZONE
HDMI1
“ZONE B” lights up
3
Use the input selection keys to select an input source.
PRESET
TUNINGTUNING
MEMORY
BLUE
YELLOWGREEN
RED
POP-UP/MENU
HOME
TOP MENU
DISPLAYRETURN
OPTION
ENTER
SETUP
MUTE
VOLUME
BLUETOOTH
NET
USB
FM/AM
INPU T
PROGR AM
BASS
ENHANCER
DIRECT
STRAIGHT
BD
DVD
TV
SC ENE
RADIO
NET
SLEEP
ZONE A ZONE B
PRESET
TUNING
TUNING
MEMORY
BLUE
YELLOW
GREEN
RED
POP-UP/MENU
HOME
TOP MENU
DISPLAY
RETURN
OPTION
OPTION
ENTER
SETUP
SETUP
MUTE
VOLUME
BLUETOOTH
NET
USB
FM/AM
INPU T
PROGR AM
BASS
ENHANCER
DIRECT
STRAIGHT
BD
DVD
TV
SC ENE
RADIO
NET
SLEEP
ZONE A
ZONE B
PRESET
TUNINGTUNING TUNINGTUNING
MEMORYMEMORY
BLUE
YELLOWGREEN
RED
POP-UP/MENU
HOME
TOP MENU
DISPLAYRETURN
OPTION
ENTER
SETUP
MUTE
BLUETOOTH
NET
USB
FM/AM
INPU T
VOLUME
BLUETOOTH
NET
USB
FM/AM
INPU T
PROGR AM
BASS
ENHANCER
DIRECT
STRAIGHT
BD
DVD
TV
SC ENE
RADIO
NET
SLEEP
ZONE A ZONE B
MUTE
FM/AM
VOLUME
PROGRAM
USB
INPU T
NET
BLUETOOTH
MUTE
V
OLUME
PR
OG R
AM
Input selection keys
NOTE
The same input source is applied to both Zone A and Zone B.
4
Start playback on the external device or select a radio station.
En
44
Correcting volume difference between Zone A and
Zone B
If you are bothered by volume difference between Zone A/B, perform the following
procedure to adjust the volume for Zone B.
NOTE
Slide the Zone switch to “ZONE A” in menu operations.
1
Press OPTION.
2
Use the cursor keys to select “Volume Trim” and press ENTER.
3
Use the cursor keys to select “ZoneB Trim” and adjust the setting.
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
4
Press OPTION.
This completes the settings.
NOTE
This setting is not effective when “ZoneB Volume” in the “Setup” menu is set to “Async.”. For details, see the
following:
▪ “Adjusting the volume for Zone B in conjunction with the volume for Zone A” (p.95)
Adjusting the volume for Zone B separately
You can separately adjust the volume for Zone B using the remote control.
NOTE
Slide the Zone switch to “ZONE A” in menu operations.
1
Press SETUP.
2
Use the cursor keys to select “Sound” and press ENTER.
3
Use the cursor keys to select “Volume” and press ENTER.
4
Use the cursor keys to select “ZoneB Volume” .
5
Use the cursor keys to select “Async.” and press ENTER.
NOTE
When “ZoneB Volume” is set to “Async.”, the volume for Zone B is temporarily set to -40 dB.
6
Press SETUP.
7
Slide the Zone switch to “ZONE B”.
8
Press VOLUME to adjust the volume for Zone B.
NOTE
To mute the audio output to Zone B, press MUTE.
En
45
PLAYBACK
Basic playback procedure
Basic procedure for playing back video and music
Basic procedure for playing back video and music is as follows.
1
Turn on the external devices (such as a TV or BD/DVD player)
connected to the unit.
2
Use the input selection keys to select an input source.
MUTE
FM/AM
VOLUME
PROGRAM
USB
INPU T
NET
BLUETOOTH
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
PR
OG R
AM
VOLUME
MU
TE
Input selection keys
3
Start playback on the external device or select a radio station.
4
Press VOLUME to adjust the volume.
NOTE
▪ To mute the audio output, press MUTE. Press MUTE again to unmute.
▪ Refer to the instruction manual for the external device.
En
46
Switching information on the front display
Press INFO on the front panel to select between the various display items on the front
display, as shown in the following table.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
SL
SW
SR
Audio Decoder
Item
About 3 seconds after a display item is selected, its corresponding information
appears.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
SBL SB SBR
MUT E VIRTU AL
FPL FPR
VOL .
SL
SW
SR
†‡ Dsur
Information
Currently input source Displayed item
HDMI
AV
AUX
AUDIO
Input (input source name), DSP Program (sound mode name), Audio
Decoder (decoder name*)
Bluetooth
USB
Song (song title), Artist (artist name), Album (album name), DSP
Program (sound mode name), Audio Decoder (decoder name*)
SERVER
AirPlay
Song (song title), Artist (artist name), Album (album name), DSP
Program (sound mode name), Audio Decoder (decoder name*), IP
Address, Ethernet MAC, Wi-Fi MAC
NET RADIO
Song (song title), Album (album name), Station (station name), DSP
Program (sound mode name), Audio Decoder (decoder name*), IP
Address, Ethernet MAC, Wi-Fi MAC
MusicCast Link
DSP Program (sound mode name), Audio Decoder (decoder name*),
IP Address, Ethernet MAC, Wi-Fi MAC
TUNER
Frequency (frequency), DSP Program (sound mode name), Audio
Decoder (decoder name*)
(U.K., Europe, Russia and Middle East models only)
Radio Data System data is also available when the unit is tuned into a
Radio Data System broadcasting station. For details, see the
following:
• “Displaying the Radio Data System information” (p.54)
* The name of the audio decoder currently activated is displayed. If no audio decoder
is activated, “Decoder Off” appears.
NOTE
Available items vary depending on the selected input source. The displayed item can also be applied
separately to each input group which is shown in the table and divided by ruled lines.
En
47
Item names and functions of the playback screen
The item names and functions of the playback screen, available when your TV is
connected to the unit via HDMI, are as follows.
2
1
1
Status indicators
Display the current shuffle/repeat settings and playback status (such as play/
pause).
2
Playback information
Displays the artist name, album name, song title, and elapsed time.
Use the following remote control keys to control playback.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNING
PRESET
TUNING
MEMORY
TOP
MENU
HOME
POP UP/MENU
BLUE
YELLOWGREEN
RED
TUNING
PRESET
TUNING
BLUE
YELL
OW
YELL
YELL
G
REE
N
RE
D
External device operation
keys
External device
operation keys
Function
a
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
f
Skips forward/backward.
g
NOTE
Displayed items vary depending on the content of playback.
En
48
Item names and functions of the browse screen
The item names and functions of the browse screen, available when your TV is
connected to the unit via HDMI, are as follows. The browse screen appears when the
next input source is selected.
• USB
• SERVER
• NET RADIO
1 4
2
5
3
1
List name
2
Contents list
Displays the list of contents. Use the cursor keys to select an item and press ENTER
to confirm the selection.
3
Item number/total
4
Status indicators
Display the current shuffle/repeat settings and playback status (such as play/
pause).
5
Operation menu
Use the cursor keys to select an item. Press ENTER to confirm the selection.
Icon Function
Moves 10 pages backward.
Moves to the previous page of the list.
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
NOTE
▪ Displayed items vary depending on the content of playback.
▪ A content selected by the cursor is displayed on the front display.
En
49
Listening to FM/AM radio
Setting the frequency steps
(Asia, Taiwan, Brazil, General, and Central and South America models only)
At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz for AM.
Depending on your country or region, set the frequency steps to 100 kHz for FM and
10 kHz for AM.
1
Set the unit to standby mode.
2
When holding down STRAIGHT on the front panel, press z
(power).
(power)
z
STRAIGHTPROGRAM
3
Press PROGRAM to select “TU”.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
TU••••FM50/AM9
4
Press STRAIGHT to select “FM100/AM10”.
5
Press z (power) to set the unit to standby mode and turn it on
again.
This completes the settings.
En
50
Selecting a frequency for reception
You can tune into a radio station by specifying its frequency.
NOTE
The radio frequencies differ depending on the country or region where the unit is being used. The explanation
of this section uses a display with frequencies used in U.K. and Europe models.
1
Press FM/AM to select “TUNER” as the input source.
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
MUT E VIRTU AL
VOL .
FM 87.50MHz
2
Press TUNING to set a frequency.
Hold down the key for about a second to search stations automatically.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNING
PRESET
TUNING
MEMORY
TOP
MENU
HOME
POP UP/MENU
BLUE
YELLOWGREEN
RED
PRESET
MEMO
RY
TO
P
MENU
HOME
POP
UP/MENU
BLUE
YELL
OW
YELL
YELL
G
REE
N
RE
D
TUNING
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
FPR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
SL
SW
SR
STEREO
TUNED
FM 98.50MHz
On the front display, “TUNED” lights up when the unit is receiving an
FM/AM radio station signal.
“STEREO” lights up when the unit is receiving a stereo FM radio signal.
NOTE
You can watch videos input from external devices while listening to radio. For details, see the
following:
▪ “Selecting a video source to be output with the selected audio source” (p.75)
En
51
Selecting a preset station
Tune into a registered radio station by selecting its preset number.
1
Press FM/AM to select “TUNER” as the input source.
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
2
Press PRESET to select the desired radio station.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNING
PRESET
TUNING
MEMORY
TOP
MENU
HOME
POP UP/MENU
BLUE
YELLOWGREEN
RED
TUNING
TUNING
MEMO
RY
TO
P
MENU
HOME
POP
UP/MENU
BLUE
YELL
OW
YELLYELL
G
REE
N
RE
D
PRESET
ENHANCER
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
LINK
ECO
MASTER
OUT
2
VOL .
SL
SW
SR
STEREO
TUNED
01:FM 98.50MHz
NOTE
“No Presets” appears on the front display when no radio stations are registered.
Registering radio stations automatically (Auto
Preset)
Automatically register FM radio stations with strong signals.
NOTE
▪ You can register up to 40 radio stations as presets.
▪ To register AM radio stations, see the following:
– “Registering a radio station manually” (p.53)
▪ (U.K., Europe, Russia and Middle East models only)
Only Radio Data System broadcasting stations are registered automatically by the Auto Preset function.
1
Press FM/AM to select “TUNER” as the input source.
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
2
Press OPTION.
3
Use the cursor keys to select “Preset” and press ENTER.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
Preset
The preset number from which to start the registration is displayed on the
front display.
NOTE
To specify the preset number from which to start the registration, press cursor keys or PRESET to
select a preset number.
4
To start the Auto Preset process, press ENTER.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
STEREO
TUNED
FPR
SBL SB SBR
FPL
SL
SW
SR
VOL .
01:FM 87.50MHz
“SEARCH” appears during Auto Preset
Preset number from which to start the registration
The Auto Preset process starts and “SEARCH” appears during Auto
Preset.
NOTE
To cancel the Auto Preset process, press RETURN.
When the Auto Preset process finishes, “FINISH” appears on the front display and the
“Option” menu closes automatically.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
Auto Preset
En
52
Registering a radio station manually
Select a radio station manually and register it to a preset number.
NOTE
You can register up to 40 radio stations as presets.
1
Press FM/AM to select “TUNER” as the input source.
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
2
Press TUNING to set a frequency.
Hold down the key for about a second to search stations automatically.
3
Hold down MEMORY for a few seconds.
The first time that you do register a station, the selected radio station will
be registered to the preset number “01”. Thereafter, each radio station
you select will be registered to the next empty (unused) preset number
after the most recently registered number.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNING
PRESET
TUNING
MEMORY
TOP
MENU
HOME
POP UP/MENU
BLUE
YELLOWGREEN
RED
TUNING
PRESET
TUNING
TO
P
MENU
HOME
POP
UP/MENU
BLUE
YELL
OW
YELLYELL
G
REE
N
RE
D
MEMORY
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
VOL .
SL
SW
SR
01:FM 98.50MHz
STEREO
TUNED
Preset number
NOTE
To select a preset number for registering, press MEMORY once after tuning into the desired radio
station, press PRESET to select a preset number, and then press MEMORY again.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
PARTY
ZONE
3 B2 A
FPR
SBL SB SBR
FPL
MUT E VIRTU AL
SLEEP
VOL .
SL
SW
SR
02:Empty
TUNED
STEREO
“Empty” (not in use) or the frequency currently registered
This completes the registers.
En
53
Clearing preset stations
Clear radio stations registered to the preset numbers.
1
Press FM/AM to select “TUNER” as the input source.
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
2
Press OPTION.
3
Use the cursor keys to select “Preset” and press ENTER.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
Preset
4
Use the cursor keys to select “CLEAR”.
5
Use the cursor keys to select a preset station to be cleared and
press ENTER.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
VOL .
SL
SW
SR
STEREO
TUNED
01:FM 98.50MHz
Preset station to be cleared
If the preset station is cleared, “Cleared” appears and then the next in-use
preset number is displayed.
01:Cleared
6
Repeat step 5 until all desired preset stations are cleared.
7
Press OPTION.
This completes the clearing preset stations.
Displaying the Radio Data System information
(U.K., Europe, Russia and Middle East models only)
Radio Data System is a data transmission system used by FM stations in many
countries. The unit can receive various types of Radio Data System data, such as
“Program Service”, “Program Type”, “Radio Text
” and “Clock Time
”, when it is tuned
into a Radio Data System broadcasting station.
1
Tune into the desired Radio Data System broadcasting station.
NOTE
We recommend using “Auto Preset” to tune into the Radio Data System broadcasting stations. For
details, see the following:
▪ “Registering radio stations automatically (Auto Preset)” (p.52)
2
Press INFO on the front panel to select between the various
display items.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
VOL .
SL
SW
SR
STEREO
TUNED
Program Type
Item name
About 3 seconds after a display item is selected, its corresponding
information appears.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
VOL .
SL
SW
SR
STEREO
TUNED
Classics
Information
Program Service
Program service name
Program Type
Current program type
Radio Text
Information on the current program
Clock Time
Current time
DSP Program
Sound mode name
Audio Decoder
Decoder name
Frequency
Frequency
NOTE
“Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio
station does not provide the Radio Data System service.
En
54
Receiving traffic information automatically
(U.K., Europe, Russia and Middle East models only)
When “TUNER” is selected as the input source, the unit automatically receives traffic
information. To enable this function, perform the following procedure to set the traffic
information station.
1
When “TUNER” is selected as the input source, press OPTION.
2
Use the cursor keys to select “Traffic Program” and press ENTER.
The traffic information station search will start in 5 seconds. Press ENTER
again to start the search immediately.
NOTE
▪ To search upward/downward from the current frequency, press the cursor keys while “READY”
is displayed.
▪ To cancel the search, press RETURN.
The following screen appears for about 3 seconds when the search
finishes.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
VOL .
SL
SW
SR
STEREO
TUNED
TP FM101.30MHz
Traffic information station (frequency)
NOTE
“TP Not Found” appears for about 3 seconds when no traffic information stations are found.
En
55
Playing back music stored on a Bluetooth® device
Playback Bluetooth® device music on the unit
You can play back music files stored on a Bluetooth device (such as smartphones) on
the unit.
Bluetooth device
(such as smartphones)
The unit
NOTE
▪ Use the wireless antennas that are standing upright for connecting to a Bluetooth device wirelessly. For
details, see the following:
– “Preparing wireless antennas (wireless connection)” (p.30)
▪ To use the Bluetooth function, turn on the Bluetooth function of a Bluetooth device.
▪ To use the Bluetooth function, set “Bluetooth” in the “Setup” menu to “On”. For details, see the following:
– “Setting the use of Bluetooth
®
” (p.104)
▪ For details on supported Bluetooth devices, see the following:
– “Supported Bluetooth
®
devices” (p.139
)
1
Press
BLUETOOTH to select “Bluetooth” as the input source.
2
On the Bluetooth device, select the unit (network name of the
unit).
A connection between the Bluetooth device and the unit will be made.
If the pass key is required, enter the number “0000”.
3
On the Bluetooth device, select a song and start playback.
The playback screen is displayed on the TV.
NOTE
▪ If the unit detects the Bluetooth device previously connected, the unit automatically connects to
the Bluetooth device after Step 1. To establish another Bluetooth connection, first terminate the
current Bluetooth connection.
▪ To terminate the Bluetooth connection, perform one of the following operations.
– Perform the disconnect operation on the Bluetooth device.
– Select an input source other than “Bluetooth” on the unit.
– Select “Disconnect” in “Audio Receive” in the “Setup” menu.
En
56
Enjoying audio using Bluetooth® speakers/
headphones
You can enjoy audio played back on the unit using Bluetooth speakers/headphones.
Bluetooth speakers/headphones
The unit
NOTE
▪ Sounds will be also output from the speakers connected to the unit.
▪ AirPlay and DSD audio cannot be delivered.
▪ You cannot use the Bluetooth audio transmitter function and the Bluetooth audio receiver function at the
same time.
1
Use the input selection keys on the remote control to select an
input source.
Select an input source other than Bluetooth.
2
Press SETUP.
3
Use the cursor keys to select “Bluetooth” and press ENTER.
4
Use the cursor keys to select “Transmitter” and then set to “On”.
5
Use the cursor keys to select “Device Search” and press ENTER
to search the Bluetooth devices.
The list of Bluetooth devices is displayed.
6
Use the cursor keys to select the Bluetooth speakers/headphones
to be connected with the unit and press ENTER.
When the connection process finishes, “Completed” appears and audio
played back on the unit will be reproduced from the Bluetooth speakers/
headphones.
NOTE
If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to the pairing
mode and then perform “Device Search” operation again.
7
Press ENTER.
This completes the settings.
NOTE
To terminate the Bluetooth connection, perform one of the following operations.
▪ Perform the disconnect operation on the Bluetooth speakers/headphones.
▪ Press the SETUP key, then use the cursor keys to select "Bluetooth", then "Transmitter", and then "Off".
En
57
Playing back music with AirPlay
Playback of iTunes/iPhone music contents with
AirPlay
The AirPlay allows you to play back iTunes or iPhone/iPad/iPod touch music on the unit
via network.
PC
iTunes
(Wired network or wireless network)
iPhone/iPad/iPod touch
The unit
Router
NOTE
For details on supported iPhone devices, see the following:
▪ “Supported AirPlay devices” (p.139)
1
Start iTunes on the PC or display the playback screen on the
iPhone.
2
On the iTunes/iPhone, click (tap) the AirPlay icon and select the
unit (network name of the unit) as the audio output device.
iOS 10 (example) iTunes (example)
3
Select a song and start playback.
The unit automatically selects “AirPlay” as the input source and starts
playback.
The playback screen is displayed on the TV.
CAUTION
▪ When you use iTunes/iPhone controls to adjust volume, the volume may be unexpectedly loud. This
could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop
playback on the iTunes/iPhone immediately. We recommend volume controls from iTunes/iPhone
within the limited range by setting “
Volume Interlock (Vol.Interlock)” in the “Option” menu.
NOTE
▪ You can turn on the unit automatically when starting playback on iTunes or iPhone. For details on the
settings, see the following:
– “Setting the use of the Network Standby function” (p.102)
▪ You can edit the network name (the unit’s name on the network) displayed on iTunes/iPhone. For details,
see the following:
– “Setting the network name of the unit” (p.103)
▪ You can adjust the unit’s volume from the iTunes/iPhone during playback. To disable volume controls from
iTunes/iPhone, see the following:
– “Enabling volume control via AirPlay” (p.78)
En
58
Playing back music stored on a USB storage device
Playback of USB storage device contents
You can play back music files stored on a USB storage device on the unit.
NOTE
For details on playable USB devices and USB file formats, see the following:
▪ “Supported USB devices” (p.139)
▪ “Supported file formats” (p.139)
1
Connect the USB storage device to the USB jack.
STRAIGHT
(CONNECT)
AUX USB
AUDIO
5V 1A
RADIO
The unit (front)
USB storage device
NOTE
▪ If the USB storage device contains many files, it may take time to load them. In this case,
“Loading…” appears on the front display.
▪
Stop playback of the USB storage device before disconnecting it from the USB jack.
▪ Connect a USB storage device directly to the USB jack of the unit. Do not use extension cables.
▪ The unit cannot charge USB devices while it is in standby mode.
2
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
NOTE
If playback is ongoing on your USB storage device, the playback screen is displayed.
3
Use the cursor keys to select an item and press ENTER.
If a song is selected, playback starts and the playback screen is
displayed.
NOTE
▪ To return to the top level while on the browse screen, hold down RETURN.
▪ To switch the screen mode browse/playback/off, press DISPLAY.
NOTE
▪ You can configure the shuffle/repeat settings for playback of contents. For details, see the following:
– “Configuring the shuffle setting” (p.77)
– “Configuring the repeat setting” (p.78)
▪ You can register contents as shortcuts and access them directly. For details, see the following:
– “Registering a favorite content as shortcut” (p.66)
En
59
Playing back music stored on media servers (PCs/NAS)
Media sharing setup on media servers (PCs/NAS)
To play back music files stored on your media servers, first you need to configure the
media sharing setting on each music server.
The setting procedure may vary depending on the media server. The following
procedure is a setup example for Windows Media Player 12.
NOTE
▪ For a media server with software except Windows Media Player installed, refer to the instruction manual
for the device or software and configure the media sharing settings.
▪ The setting procedure may vary depending on the view setting of Windows Media Player or the settings of
PC.
1
Start Windows Media Player 12 on your PC.
2
Select “Stream”, then “Turn on media streaming”.
3
Click “Turn on media streaming”.
4
Select “Allowed” from the drop-down list next to the unit’s model
name.
5
Click “OK” to exit.
This completes the settings.
NOTE
For details on media sharing settings, refer to Windows Media Player help.
Playing back music stored on media servers (PCs/
NAS)
You can play back music files stored on your media server on the unit.
NOTE
▪ You need to configure the media sharing setting on each music server in advance. For details, see the
following:
– “Media sharing setup on media servers (PCs/NAS)” (p.60)
▪ To use this function, the unit and your PC must be connected to the same router. You can check whether
the network parameters (such as the IP address) are properly assigned to the unit. For details, see the
following:
– “Checking the network information of the unit” (p.100)
▪ The audio may be interrupted while using the wireless network connection. In this case, use the wired
network connection.
▪ For details on playable file formats, see the following:
– “Supported file formats” (p.139)
1
Press NET to select “SERVER” as the input source.
The browse screen is displayed on the TV.
NOTE
If playback of a music file selected from the unit is ongoing on your PC, the playback screen is
displayed.
2
Use the cursor keys to select a music server and press ENTER.
En
60
3
Use the cursor keys to select an item and press ENTER.
If a song is selected, playback starts and the playback screen is
displayed.
NOTE
▪ To return to the top level while on the browse screen, hold down RETURN.
▪ To switch the screen mode browse/playback/off, press DISPLAY.
NOTE
▪ You can configure the shuffle/repeat settings for playback of contents. For details, see the following:
– “Configuring the shuffle setting” (p.77)
– “Configuring the repeat setting” (p.78)
▪ You can also use the Digital Media Controller (DMC) to control playback. For details, see the following:
– “Setting the use of a Digital Media Controller” (p.102)
▪ You can register contents as shortcuts and access them directly. For details, see the following:
– “Registering a favorite content as shortcut” (p.66)
En
61
Listening to Internet radio
Selecting an Internet radio station
Select an Internet radio station and start playback.
NOTE
▪ To use this function, the unit must be connected to the Internet. You can check whether the network
parameters (such as the IP address) are properly assigned to the unit. For details, see the following:
– “Checking the network information of the unit” (p.100)
▪ You may not be able to receive some Internet radio stations.
▪ The unit uses the airable.Radio service. airable is a service of Tune In GmbH.
▪ This service may be discontinued without notice.
▪ Folder names are different depending on the language.
1
Press NET to select “NET RADIO” as the input source.
The browse screen is displayed on the TV.
2
Use the cursor keys to select an item and press ENTER.
If an Internet radio station is selected, playback starts and the playback
screen is displayed.
NOTE
▪ To return to the top level while on the browse screen, hold down RETURN.
▪ To switch the screen mode browse/playback/off, press DISPLAY.
Registering favorite Internet radio stations
You can register the Internet radio station in playback at present to the “Favorites”
folder.
1
While listening to Internet radio, press OPTION.
2
Use the cursor keys to select “Add to favorites” and press
ENTER.
On the playback screen, the current station is added to the “Favorites”
folder. On the browse screen, the station selected in the list is added to
the “Favorites” folder.
When the registering process finishes, the “Option” menu closes
automatically.
NOTE
▪ Radio stations registered to favorites are displayed with “«”.
▪ To remove a station that is registered to favorites, select the station and then select “Remove from
favorites
”.
▪ You can register Internet radio stations as shortcuts and access them directly. For details, see the
following:
– “Registering a favorite content as shortcut” (p.66)
En
62
Listening to music streaming services
Listening to a streaming service
You can listen to a streaming service with the MusicCast CONTROLLER on your
mobile device. On the MusicCast CONTROLLER screen, select the room name that
was specified for the unit, and then select the streaming service to be tuned into by its
station name. For details, see the MusicCast CONTROLLER app.
NOTE
▪ Service is limited to certain areas.
▪ Services supported with the unit may not be available depending upon some regions where the unit is
purchased.
▪ Service may change or be discontinued without notice.
▪ After registering the unit in the MusicCast CONTROLLER app, you can use the streaming service. For
details, see the following:
– “Adding the unit to the MusicCast network” (p.37)
▪ To use this function, the unit must be connected to the Internet. You can check whether the network
parameters (such as the IP address) are properly assigned to the unit. For details, see the following:
– “Checking the network information of the unit” (p.100)
▪ For details on music streaming services, see the supplements for streaming services. Access the Yamaha
Downloads site to download the supplement.
http://download.yamaha.com/
En
63
Useful playback functions
SCENE function
n
Selecting the input source and favorite settings with
one touch (SCENE)
The SCENE function allows you to select the following settings with just one touch.
• Input source
• Sound program
• Compressed Music Enhancer On/Off
• SCENE link playback
• Target zones
You can register four SCENE functions that are assigned to four SCENE keys on the
remote control respectively.
n
Selecting a registered scene
Press SCENE, and then the input source and settings registered to the corresponding
scene are selected. The unit turns on automatically when it is in standby mode.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
PROGRAM
STRAIGHT
ENHANCER
BASS
BD
DVD
TV
S C ENE
RADIO
SLEEP
DIRECT
ZONE A ZONE B
NE T
PR
OG R
AM
ST
RA
IGHT
ENHANCER
BA
SS
SLEEP
DIRECT
ZONE
A Z
O
NE
B
SCENE
By default, the following settings are registered for each scene.
SCENE
Input
HDMI1 AUDIO1 NET RADIO TUNER
Sound program
Sci-Fi STRAIGHT 7ch Stereo 7ch Stereo
Compressed Music
Enhancer
Off On On On
SCENE link playback
On On Off Off
Target zone
Zone A Zone A Zone A Zone A
NOTE
▪ For details on the sound program, Compressed Music Enhancer and target zones, see the following:
– “Enjoying sound field effects optimized for the type of content” (p.39)
– “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.42)
– “Operating the Zone B” (p.44)
▪ The SCENE link playback function allows you to automatically turn on the TV or start playback of an
external device connected to the unit via HDMI, in conjunction with a scene selection. For details, see the
following:
– “Setting the use of SCENE link playback” (p.91)
En
64
n
Registering a scene
You can change the default setting and register the function that is assigned to each
SCENE key.
NOTE
We recommend registering the scene with playing back the content that you want to register.
1
Perform the following operations to prepare the settings you want
to assign to a scene.
▪ Select an input source
▪ Select a sound program or straight decode
▪ Enable/disable Compressed Music Enhancer
▪ Enable/disable SCENE link playback
▪ Enable/disable the audio output to Zone A/B
2
Hold down the desired SCENE key until “SET Complete” appears
on the front display.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
SL
SW
SR
SET Complete
This completes the registers.
NOTE
For details on the settings, see the following:
▪ “Enjoying sound field effects optimized for the type of content” (p.39)
▪ “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.42)
▪ “Setting the use of SCENE link playback” (p.91)
▪ “Operating the Zone B” (p.44)
En
65
Shortcut function
n
Registering a favorite content as shortcut
You can register favorite Bluetooth, USB, media server and network content as
shortcuts and access them directly by selecting the shortcut numbers.
NOTE
▪ You can register up to 40 contents as shortcuts.
▪ You can also use the “Favorites” feature to register Internet radio stations. For details, see the following:
– “Registering favorite Internet radio stations” (p.62)
▪ The unit registers Bluetooth or AirPlay as an input source. No individual content can be registered.
1
Play back a song or a radio station to be registered.
2
Hold down MEMORY for a few seconds.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNING
PRESET
TUNING
MEMORY
TOP
MENU
HOME
POP UP/MENU
BLUE
YELLOWGREEN
RED
TUNING
PRESET
TUNING
TO
P
MENU
HOME
POP
UP/MENU
BLUE
YELL
OW
YELLYELL
G
REE
N
RE
D
MEMORY
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
STEREO
TUNED
VOL .
SL
SW
SR
01:Empty
Shortcut number (flashes)
“MEMORY” appears on the front display and the shortcut number to
which the item will be registered blinks.
NOTE
To change a shortcut number to which the item will be registered, use PRESET to select the
shortcut number after step 2.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
STEREO
TUNED
VOL .
SL
SW
SR
02:Empty
“Empty” (not in use) or item currently registered
3
Press MEMORY.
The registered shortcut number and “Memorized” appear on the front
display.
This completes the registers.
En
66
n
Recalling a registered content as shortcut
Recall a registered content (Bluetooth, USB, media server and network content) by
selecting the shortcut number.
NOTE
You can register up to 40 contents as shortcuts.
1
Press BLUETOOTH, NET or USB.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
MUTE
FM/AM
VOLUME
PROGRAM
USB
INPU T
NET
BLUETOOTH
MUTE
FM/AM
V
OLUME
PR
OG R
AM
IN
PU
T
USB
N
ET
BLUETOOTH
2
Press PRESET to select a desired content.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNING
PRESET
TUNING
MEMORY
TOP
MENU
HOME
POP UP/MENU
BLUE
YELLOWGREEN
RED
TUNING
TUNING
MEMO
RY
TO
P
MENU
HOME
POP
UP/MENU
BLUE
YELL
OW
YELLYELL
G
REE
N
RE
D
PRESET
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
STEREO
TUNED
Hi
VOL .
SL
SW
SR
01:USB
Playback of the selected content starts.
NOTE
▪ “No Presets” appears on the front display when no items are registered.
▪ The registered item cannot be recalled in the following cases.
– A USB storage device which contains the registered item is not connected to this unit.
– A PC which contains the registered item is turned off or not connected to the network.
– The registered network content is temporarily unavailable or out of service.
– The registered item (file) has been deleted or moved to another location.
– A Bluetooth connection cannot be established.
▪ When you register music files stored on a USB storage device or a media server (PC/NAS), this
unit memorizes the relative position of the music files in the folder. If you have added or deleted
any music files to or from the folder, this unit may not recall the music file correctly. In such
cases, register the items again.
▪ The registered content (songs and Internet radio stations) can be displayed as a list and easily
removed by using MusicCast CONTROLLER on your mobile device. For details, see the
following:
– “Using MusicCast CONTROLLER” (p.37)
En
67
Configuring playback settings for different playback sources (Option menu)
Basic operation of the Option menu
Perform the following basic procedure to operate the “Option” menu. With the “Option”
menu, you can configure different playback settings according to the input source
currently being played back.
1
Press OPTION.
POP-UP/MENU
HOME
TOP MENU
DISPLAYRETURN
OPTION
ENTER
SETUP
MUTE
PO
P-UP
/
MENU
HO
ME
T
O
P MEN
U
D
I
S
PLAY
RETURN
O
OPTION
ENTER
P
SETUP
MUTE
POP-UP/MENU
HOME
TOP MENU
DISPLAYRETURN
OPTION
ENTER
SETUP
MUTE
PRESET
TUNINGTUNING
MEMORY
BLUE
YELLOWGREEN
RED
POP-UP/MENU
HOME
TOP MENU
DISPLAYRETURN
OPTION
ENTER
SETUP
MUTE
VOLUME
BLUETOOTH
NET
USB
FM/AM
INPU T
PROGR AM
BASS
ENHANCER
DIRECT
STRAIGHT
BD
DVD
TV
SC ENE
RADIO
NET
SLEEP
ZONE A ZONE B
PRESET
TUNING
TUNING
MEMORY
BLUE
YELLOW
GREEN
RED
POP-UP/MENU
HOME
TOP MENU
DISPLAY
RETURN
OPTION
OPTION
ENTER
SETUP
SETUP
MUTE
VOLUME
BLUETOOTH
NET
USB
FM/AM
INPU T
PROGR AM
BASS
ENHANCER
DIRECT
STRAIGHT
BD
DVD
TV
SC ENE
RADIO
NET
SLEEP
ZONE A
ZONE B
PRESET
TUNINGTUNING TUNINGTUNING
MEMORYMEMORY
BLUE
YELLOWGREEN
RED
POP-UP/MENU
HOME
TOP MENU
DISPLAYRETURN
OPTION
ENTER
SETUP
MUTE
BLUETOOTH
NET
USB
FM/AM
INPU T
VOLUME
BLUETOOTH
NET
USB
FM/AM
INPU T
PROGR AM
BASS
ENHANCER
DIRECT
STRAIGHT
BD
DVD
TV
SC ENE
RADIO
NET
SLEEP
ZONE A ZONE B
MENU
ME
POP-UP/MENU
POP-UP/MENU
POP-UP/MENU
POP-UP/MENU
PO
PO
P-UP
P-UP
/
/
MENU
MENU
HOME
HOME
HOME
HOME
HO
HO
ME
ME
TOTO
T
T
O
O
P MENU
P MENU
P ME
P ME
N
N
U
U
DISPLA
Y
DISPLADISPLA
RETURN
ENTER
SETU
P
P
MUTE
OPTION
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
STEREO
TUNED
VOL .
SL
SW
SR
Input Select
Front display
TV screen
2
Use the cursor keys to select an item and press ENTER.
3
Use the cursor keys to select a setting.
4
Press OPTION.
This completes the settings.
NOTE
For details on the default settings, see the following:
▪ “Default settings of the Option menu” (p.149)
En
68
Option menu items
Use the following table to configure playback settings of the unit.
NOTE
▪ Available items vary depending on the selected input source.
▪ Text in parentheses denotes indicators on the front display.
▪ Depending on the region of purchase, some menu items for audio streaming services are also available.
Item Function Page
Input Select (
Input Select)
Switches the input source. p.70
Tone Control (
Tone Control)
Adjusts the level of high-frequency range and low-
frequency range individually.
p.70
DSP/Surround
(DSP/
Surround)
Program (PRG)
Select the sound programs and stereo playback. p.70
Sur.Decode
(SrDec)
Selects a surround decoder to be used. p.71
DSP Level
(DSP Level)
Adjusts the sound field effect level. p.72
Adaptive DRC
(A.DRC)
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted to the volume.
p.72
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer. p.73
Volume Trim
(Volume Trim)
Input Trim
(In.Trim)
Corrects volume differences between input sources. p.73
Subwoofer Trim
(SW.Trim)
Fine-adjusts the subwoofer volume. p.73
ZoneB Trim
(ZB.Trim)
Corrects volume differences between Zone A/B. p.73
Lipsync (Lipsync)
Enables/disables the “Lipsync” setting in the “Setup”
menu.
p.73
Signal Information
(
Signal Info.)
Displays information about the video/audio signals. p.74
Audio In (Audio In)
Combines the video of the selected input source with
the audio of a different input source.
p.74
Video Out (Video Out)
Selects a video source to be output together with the
selected audio source.
p.75
FM Mode (FM Mode)
Switches between “Stereo” and “Monaural” for FM
radio reception.
p.75
Item Function Page
Preset (Preset)
Auto Preset
(
AUTO)
Automatically registers FM radio stations with strong
signals as presets.
p.76
Clear Preset
(CLEAR)
Clear radio stations registered to preset numbers. p.76
Traffic Program
(TrafficProgram)
(U.K., Europe, Russia and Middle East models only)
Automatically searches for a traffic information
station.
p.77
Shuffle (Shuffle)
Configures the shuffle setting. p.77
Repeat
(Repeat)
Configures the repeat setting. p.78
Volume Interlock
(Vol.Interlock)
Enables/disables volume control from iTunes/iPhone
via AirPlay.
p.78
Add to favorites (
Add to Fav.)
Remove from favorites
(RemovefromFav.)
Adds your favorite Internet radio station to the
“Favorites
” folder, or removes it from the “
Favorites”
folder.
p.78
En
69
Switching the input source
Switches the input source. Press ENTER to switch to the selected input source.
Option menu
“Input Select”
Adjusting the tone of the audio output
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
individually.
Option menu
“Tone Control”
Choices
Treble, Bass
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
NOTE
▪ When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears.
▪ You can also adjust the tone with the front panel controls. Press TONE CONTROL to select “Treble” or
“Bass”, then press PROGRAM to make an adjustment.
▪ If you set an extreme value, sounds may not match those from other channels.
Configuring DSP/Surround
n
Selecting sound programs
Select sound programs and stereo playback.
NOTE
You can select a sound program by pressing PROGRAM.
Option menu
“DSP/Surround” > “Program”
MUSIC
Hall in Munich
This program simulates a Munich concert hall with approximately 2,500
seats that uses stylish wood for the interior finishing. Fine, beautiful
reverberations spread richly, creating a calming atmosphere. The
listener’s virtual seat is at the center left of the arena.
Hall in Vienna
This program simulates a 1700-seat, middle-sized concert hall with a
shoebox shape that is traditional in Vienna. Pillars and ornate carvings
create extremely complex reverberations from all around the audience,
producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling, like an
audience hall in a palace. It offers pleasant reverberations that are
suitable for courtly music and chamber music.
Cellar Club
This program simulates an intimate concert venue with a low ceiling and
homey atmosphere. A realistic, live sound field delivers powerful sounds
that make you feel as if you are sitting in the front row in front of a small
stage.
The Roxy Theatre
This program creates the sound field of a 460-seat rock music concert
venue in Los Angeles. The listener’s virtual seat is at the center left of the
hall.
The Bottom Line
This program creates the sound field at stage front in The Bottom Line, a
famous New York jazz club once. The floor can seat 300 people to the
left and right in a sound field offering real and vibrant sound.
En
70
MOVIE
Sports
This program allows listeners to enjoy the rich vividness of sport
broadcasts and light entertainment programs. In sports broadcasts, the
commentators’ voices are positioned clearly at the center, while the
atmosphere inside the stadium is realistically conveyed by the peripheral
delivery of the sounds of the fans in a suitable space.
Action Game
This program is suitable for action games, such as car racing and
fighting games. The reality of, and emphasis on, various effects makes
the player feel like they are right in the middle of the action, allowing for
greater concentration. Use this program in combination with Compressed
Music Enhancer for a more dynamic and strong sound field.
Roleplaying Game
This program is suitable for role-playing and adventure games. This
program adds depth to the sound field for natural and realistic
reproduction of background music, special effects, and dialogue from a
wide variety of scenes. Use this program in combination with
Compressed Music Enhancer for a clearer and more spatial sound field.
Music Video
This program allows you to enjoy videos of pop, rock, and jazz concerts,
as if you were there yourself. Immerse yourself in the hot concert
atmosphere thanks to the vividness of the singers and solos on stage, a
presence sound field that emphasizes the beat of rhythm instruments,
and a surround sound field that reproduces the space of a big live hall.
Standard
This program creates a sound field that emphasizes the surround feeling
without disturbing the original acoustic positioning of multichannel audio.
Its design is based on the concept of the ideal movie theater, in which
the audience is surrounded by beautiful reverberations from the left,
right, and rear.
Spectacle
This program delivers the scale and grandeur of spectacular movie
productions. It delivers an expansive sound space to match the
cinemascope wide-screen, and boasts a broad dynamic range,
providing everything from small delicate sounds to powerful loud booms.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of
the latest Sci-Fi and SFX movies. You can enjoy a variety of
cinematographically created virtual spaces reproduced with clear
separation between dialogue, sound effects, and background music.
Adventure
This program is ideal for reproducing the sound design of action and
adventure movies precisely. The sound field restrains reverberations, but
puts emphasis on reproducing a sensation of expansiveness on both
sides, powerful space expanded widely to the left and right. The
restrained depth creates a clear and powerful space, while also
maintaining the articulation of the sounds and the separation of the
channels.
Drama
This program features stable reverberations that match a wide range of
movie genres, from serious dramas to musicals and comedies. The
reverberations are modest, but suitably stereophonic. The sound effects
and background music are reproduced with a gentle echo that does not
impinge on the articulation of the dialogue. You’ll never get tired listening
for long periods.
Mono Movie
This program reproduces monaural video sources, such as classic
movies, in an atmosphere of a good old movie theater. The program
creates a pleasant space with depth, by adding breadth and the
appropriate reverberation to the original audio.
STEREO
2ch Stereo
Use this program to mix down multichannel sources to 2 channels. When
multichannel signals are input, they are down mixed to 2 channels and
output from the front speakers (this program does not utilize CINEMA
DSP).
7ch Stereo
Use this program to output sound from all speakers. When you play back
multichannel sources, the unit mixes down the source to 2 channels, and
then outputs the sound from all speakers. This program creates a larger
sound field and is ideal for background music at parties.
UNPROCESSED
Sur.Decode
The surround decoder enables multichannel playback from 2-channel
sources without sound field effects.
Straight
When the straight decode mode is enabled, the unit produces stereo
sound from the front speakers for 2-channel sources such as CDs, and
produces unprocessed multichannel sounds for multichannel sources.
NOTE
For details on “Sur.Decode”, see the following:
▪ “Selecting the surround decoder used in the program” (p.71)
n
Selecting the surround decoder used in the program
Selects a surround decoder to be used.
NOTE
For details on “Program” in the “Option” menu, see the following:
▪ “Selecting sound programs” (p.70)
Option menu
“DSP/Surround” > “Sur.Decode”
En
71
Settings
Auto
Uses the decoder automatically selected by input source. The DTS
Neural:X decoder is selected for DTS sources and the Dolby Surround
decoder is selected for other sources.
bDsur
Dolby Surround decoder. Expands the sound using a method optimized
for the layout of the installed speakers. It produces the extended
surround sound optimized for your speaker system. A real acoustic
space (including overhead) will be created especially when object-
based audio (such as Dolby Atmos content) is played.
Neural:X
DTS Neural:X decoder. Expands the sound using a method optimized
for the layout of the installed speakers. It produces the extended
surround sound optimized for your speaker system. A real acoustic
space (including overhead) will be created especially when object-
based audio (such as DTS:X content) is played.
Neo:6 Cinema
Uses the DTS Neo:6 decoder (or DTS-ES Matrix decoder) suitable for
movies. Sounds will be output from the surround/surround back
speakers.
Neo:6 Music
Uses the DTS Neo:6 decoder (or DTS-ES Matrix decoder) suitable for
music. Sounds will be output from the surround/surround back
speakers.
NOTE
▪ For details on each decoder, see the following:
– “Glossary of audio decoding format” (p.136)
▪ You can adjust the surround decoder parameters in “DSP Parameter” in the “Setup” menu. For details,
see the following:
– “Adjusting the center localization (broadening effect) of the front sound field” (p.92)
– “Setting the use of Center Spread” (p.92)
▪ The selected surround decoder may not work for some input sources.
▪ We recommend Dolby Surround while network streaming is Dolby contents.
▪ The Neural:X decoder does not work for Dolby Digital Plus or Dolby TrueHD signals. Select “Auto” or
“bDsur” for these signals.
▪ When the Dolby Surround decoder or the Neural:X decoder is selected, virtual surround processing (such
as Virtual CINEMA FRONT) does not work. For details, see the following:
– “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.39)
– “Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)” (p.39)
n
Adjusting the sound field effect level
Adjusts the sound field effect level.
Option menu
“DSP/Surround” > “DSP Level”
Setting range
-6 dB to +3 dB (1 dB increments)
n
Adjusting the dynamic range automatically
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
when the volume level is adjusted. When it is set to “
On”, the dynamic range becomes
narrow at a low volume and wide at a high volume. It is useful for listening to playback
at a low volume at night.
Option menu
“DSP/Surround” > “Adaptive DRC”
Settings
Off The dynamic range is not automatically adjusted.
On Automatically adjusts the dynamic range.
En
72
n
Setting Compressed Music Enhancer
Enables/disables Compressed Music Enhancer.
Option menu
“DSP/Surround” > “Enhancer”
Settings
Off Disables Compressed Music Enhancer.
On Enables Compressed Music Enhancer.
NOTE
▪ This setting is applied separately to each input source.
▪ You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer.
▪ For details on Compressed Music Enhancer, see the following:
– “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.42)
Correcting volume differences during playback
n
Correcting volume differences between input sources
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Option menu
“Volume Trim” > “Input Trim”
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
NOTE
This setting is applied separately to each input source.
n
Adjusting the subwoofer volume
Fine-adjusts the subwoofer volume.
Option menu
“Volume Trim” > “Subwoofer Trim”
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
n
Correcting volume difference between Zone A and
Zone B
If you are bothered by volume difference between Zone A/B, adjust the volume for
Zone B.
Option menu
“Volume Trim” > “ZoneB Trim”
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
NOTE
This setting is not effective when “ZoneB Volume” in the “Setup” menu is set to “Async.”. For details, see the
following:
▪ “Adjusting the volume for Zone B in conjunction with the volume for Zone A” (p.95)
Enabling Lipsync adjustment
Enables/disables the adjustment configured in “Lipsync” in the “Setup” menu.
NOTE
For details on “Lipsync” in the “Setup” menu, see the following:
▪ “Setting the adjustment method of the Lipsync function” (p.92)
Option menu
“Lipsync”
Settings
Off Disables the “Lipsync” adjustment.
On Enables the “Lipsync” adjustment.
NOTE
This setting is applied separately to each input source.
En
73
Checking information about the video/audio signals
Displays information about the video/audio signals.
Option menu
“Signal Information”
Format Audio format of the input signal
Channel
The number of source channels in the input signal (front/surround/LFE)
For example, “3/2/0.1” means 3 front channels, 2 surround channels, and
LFE.
Sampling The number of samples per second of the input digital signal
Video In Type and resolution of the input digital signal
Video Out Type and resolution of the output digital signal
NOTE
To switch the information on the front display, press the cursor keys.
Combining audio of another input source with video
of the current input source
Select the audio of a different input source to play back together with the video of the
currently selected input source. For example, use this function in the following cases.
• Connecting a playback device that supports HDMI video output, but not HDMI
audio output
Option menu
“Audio In”
Input sources
HDMI 1-4, AV 1-3
Settings
AV 1-3, AUDIO 1-3
Video/audio input jacks available on the unit
Output jacks on video device Input jacks on the unit
Video Audio Video Audio
HDMI
Digital optical HDMI 1–4 AUDIO 1 (OPTICAL)
Digital coaxial HDMI 1–4
AUDIO 2 (COAXIAL)
AV 1 (COAXIAL)
Analog stereo HDMI 1–4
AUDIO 3 (AUDIO)
AV 2–3 (AUDIO)
Composite video Digital optical AV 1–3 (VIDEO) AUDIO 1 (OPTICAL)
Necessary setting
For example, if you have connected a video device to AV 2 (VIDEO) and AUDIO 1
(OPTICAL) jack of the unit, change the combination setting as follows.
VIDEO
OPTICAL
O O
V
V
The unit (rear)
AUDIO 1 (OPTICAL) jack
AV 2 (VIDEO) jack
Video output
(composite video)
Audio output
(digital optical)
Set-top box
En
74
1
Press INPUT to select “AV 2” (video input jack to be used) as the
input source.
2
Press OPTION.
MUTE
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
ENTER
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGR AM
USB
STRAIGHT
ENHANCER BASS
INPU T
BD
DVD
TV
SC ENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
MUTE
TO
P MENU
HOME
POP-UP/MENU
DISPLA
Y
DISPLADISPLA
RETURN
SETU
P
P
OPTION
ENTER
Cursor keys
3
Use the cursor keys to select “Audio In” and press ENTER.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
Audio In
4
Use the cursor keys to select “AUDIO 1” (audio input jack to be
used).
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
Audio•••AUDIO1
5
Press OPTION.
This completes the necessary settings.
Selecting a video source to be output with the
selected audio source
Selects a video source to be output together with the selected audio source. For
example, you can watch the video from a different source while listening to the radio.
Option menu
“Video Out”
Input sources
AUX, AUDIO 1-3, TUNER, (network sources), AirPlay, MusicCast Link, SERVER, NET
RADIO, Bluetooth, USB
Settings
Off Does not output video.
HDMI 1-4, AV 1-3 Outputs video input through the corresponding video input jacks.
Switching between stereo and monaural for FM radio
reception
Switch between stereo and monaural for FM radio reception. When the signal
reception for an FM radio station is unstable, switching to monaural may improve it.
Option menu
“FM Mode”
Settings
Stereo Enables stereo for FM radio reception.
Monaural Enables monaural for FM radio reception.
En
75
Setting presets for radio stations
n
Registering radio stations automatically
Automatically register FM radio stations with strong signals.
NOTE
▪ You can register up to 40 radio stations as presets.
▪ To register AM radio stations, see the following:
– “Registering a radio station manually” (p.53)
▪ (U.K., Europe, Russia and Middle East models only)
Only Radio Data System broadcasting stations are registered automatically by the Auto Preset function.
Option menu
“Preset” > “Auto Preset”
1
Press FM/AM to select “TUNER” as the input source.
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
2
Press OPTION.
3
Use the cursor keys to select “Preset” and press ENTER.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
Preset
The preset number from which to start the registration is displayed on the
front display.
NOTE
To specify the preset number from which to start the registration, press cursor keys or PRESET to
select a preset number.
4
To start the Auto Preset process, press ENTER.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
STEREO
TUNED
FPR
SBL SB SBR
FPL
SL
SW
SR
VOL .
01:FM 87.50MHz
“SEARCH” appears during Auto Preset
Preset number from which to start the registration
The Auto Preset process starts and “SEARCH” appears during Auto
Preset.
NOTE
To cancel the Auto Preset process, press RETURN.
When the Auto Preset process finishes, “FINISH” appears on the front display and the
“Option” menu closes automatically.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
Auto Preset
n
Clearing preset stations
Clear radio stations registered to the preset numbers.
Option menu
“Preset” > “Clear Preset”
1
Press FM/AM to select “TUNER” as the input source.
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
2
Press OPTION.
3
Use the cursor keys to select “Preset” and press ENTER.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
VOL .
Preset
4
Use the cursor keys to select “CLEAR”.
En
76
5
Use the cursor keys to select a preset station to be cleared and
press ENTER.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
VOL .
SL
SW
SR
STEREO
TUNED
01:FM 98.50MHz
Preset station to be cleared
If the preset station is cleared, “Cleared” appears and then the next in-use
preset number is displayed.
01:Cleared
6
Repeat step 5 until all desired preset stations are cleared.
7
Press OPTION.
This completes the clearing preset stations.
Receiving traffic information automatically
(U.K., Europe, Russia and Middle East models only)
When “TUNER” is selected as the input source, the unit automatically searches for a
traffic information station.
Option menu
“Traffic Program”
1
When “TUNER” is selected as the input source, press OPTION.
2
Use the cursor keys to select “Traffic Program” and press ENTER.
The traffic information station search will start in 5 seconds. Press ENTER
again to start the search immediately.
NOTE
▪ To search upward/downward from the current frequency, press the cursor keys while “READY”
is displayed.
▪ To cancel the search, press RETURN.
The following screen appears for about 3 seconds when the search
finishes.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E VIRTU AL
FPR
SBL SB SBR
FPL
VOL .
SL
SW
SR
STEREO
TUNED
TP FM101.30MHz
Traffic information station (frequency)
NOTE
“TP Not Found” appears for about 3 seconds when no traffic information stations are found.
Configuring the shuffle setting
Configure the shuffle setting for playback.
Option menu
“Shuffle”
Settings
Off Turns off the shuffle function.
On Plays back songs in the current album (folder) in random order.
NOTE
This setting is available only when “USB” or “SERVER” is selected as the input source.
En
77
Configuring the repeat setting
Configure the repeat setting for playback.
Option menu
“Repeat”
Settings
Off Turns off the repeat function.
One Plays back the current song repeatedly.
All Plays back all songs in the current album (folder) repeatedly.
NOTE
This setting is available only when “USB” or “SERVER” is selected as the input source.
Enabling volume control via AirPlay
Enables/disables volume control from iTunes/iPhone via AirPlay. When other than “Off”
is set, you can adjust the unit’s volume from the iTunes/iPhone during playback.
Option menu
“Volume Interlock”
Settings
Off Disables volume control from iTunes/iPhone.
Limited
Enables volume control from iTunes/iPhone within the limited range
(-80 dB to -20 dB and mute).
Full
Enables volume control from iTunes/iPhone in the full range
(-80 dB to +16.5 dB and mute).
Adding an Internet radio station to the “Favorites”
folder
Register the currently playing Internet radio station to the “Favorites” folder.
Option menu
“Add to favorites”
1
While listening to Internet radio, press OPTION.
2
Use the cursor keys to select “Add to favorites” and press
ENTER.
When the registering process finishes, the “Option” menu closes
automatically.
Removing an Internet radio station from the
“Favorites” folder
Remove an Internet radio station from the “Favorites” folder.
Option menu
“Remove from favorites”
1
Use the cursor keys to select the station to be removed from the
“Favorites” folder.
2
Press OPTION.
3
Use the cursor keys to select “Remove from favorites” and press
ENTER.
When the removing process finishes, the “Option” menu closes
automatically.
En
78
CONFIGURATIONS
Configuring various functions (Setup menu)
Basic operation of the Setup menu
Perform the following basic procedure to operate the “Setup” menu. You can configure
the unit’s various functions with the “Setup” menu.
NOTE
▪ If new firmware is available, the message screen appears.
▪
If new firmware is available, the envelope icon (p) appears in the screen.
▪ For details on firmware updating, see the following:
– “Firmware updates” (p.124)
1
Press SETUP.
POP-UP/MENU
HOME
TOP MENU
DISPLAYRETURN
OPTION
ENTER
SETUP
MUTE
PO
P-UP
/
MENU
HO
ME
T
O
P MEN
U
D
I
S
PLAY
RETURN
O
OPTION
ENTER
P
SETUP
MUTE
POP-UP/MENU
HOME
TOP MENU
DISPLAYRETURN
OPTION
ENTER
SETUP
MUTE
PRESET
TUNINGTUNING
MEMORY
BLUE
YELLOWGREEN
RED
POP-UP/MENU
HOME
TOP MENU
DISPLAYRETURN
OPTION
ENTER
SETUP
MUTE
VOLUME
BLUETOOTH
NET
USB
FM/AM
INPU T
PROGR AM
BASS
ENHANCER
DIRECT
STRAIGHT
BD
DVD
TV
SC ENE
RADIO
NET
SLEEP
ZONE A ZONE B
PRESET
TUNING
TUNING
MEMORY
BLUE
YELLOW
GREEN
RED
POP-UP/MENU
HOME
TOP MENU
DISPLAY
RETURN
OPTION
OPTION
ENTER
SETUP
SETUP
MUTE
VOLUME
BLUETOOTH
NET
USB
FM/AM
INPU T
PROGR AM
BASS
ENHANCER
DIRECT
STRAIGHT
BD
DVD
TV
SC ENE
RADIO
NET
SLEEP
ZONE A
ZONE B
PRESET
TUNINGTUNING TUNINGTUNING
MEMORYMEMORY
BLUE
YELLOWGREEN
RED
POP-UP/MENU
HOME
TOP MENU
DISPLAYRETURN
OPTION
ENTER
SETUP
MUTE
BLUETOOTH
NET
USB
FM/AM
INPU T
VOLUME
BLUETOOTH
NET
USB
FM/AM
INPU T
PROGR AM
BASS
ENHANCER
DIRECT
STRAIGHT
BD
DVD
TV
SC ENE
RADIO
NET
SLEEP
ZONE A ZONE B
MENU
ME
POP-UP/MENU
POP-UP/MENU
POP-UP/MENU
POP-UP/MENU
PO
PO
P-UP
P-UP
/
/
MENU
MENU
HOME
HOME
HOME
HOME
HO
HO
ME
ME
TOTO
T
T
O
O
P MENU
P MENU
P ME
P ME
N
N
U
U
DISPLA
Y
DISPLADISPLA
RETURN
OPTION
OPTION
ENTER
MUTE
SETUP
2
Use the cursor keys to select a menu and press ENTER.
3
Use the cursor keys to select an item and press ENTER.
4
Use the cursor keys to select a setting and press ENTER.
5
Press SETUP.
This completes the settings.
NOTE
For details on the default settings, see the following:
▪ “Default settings of the Setup menu” (p.149)
En
79
Setup menu items
Use the following table to configure various functions of the unit.
Menu Item Function Page
Speaker
Configuration
Power Amp Assign
Selects a speaker system. p.83
Subwoofer
Selects whether or not a subwoofer is connected. p.83
Front
Selects the size of the front speakers. p.83
Center
Selects whether or not a center speaker is connected and its size. p.84
Surround
Selects whether or not surround speakers are connected and their size. p.84
Surround Back
Selects whether or not surround back speakers are connected and their size. p.85
Presence
Selects whether or not presence speakers are connected and their size. p.85
Layout
Selects the layouts of the presence speakers. p.86
Crossover
Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. p.86
Subwoofer Phase
Sets the phase of the subwoofer. p.86
Extra Bass
Enables/disables Extra Bass. p.86
Virtual CINEMA FRONT
Enables/disables the front 5-channel speaker (Virtual CINEMA FRONT) configuration. p.87
Distance
Sets the distance between each speaker and the listening position. p.87
Level
Adjusts the volume of each speaker. p.87
Equalizer
Adjusts the tone with an equalizer. p.88
Test Tone
Enables/disables the test tone output. p.88
HDMI
HDMI Control
Enables/disables HDMI Control. p.89
Audio Output
Enables/disables audio output from a TV. p.89
Standby Through
Selects whether to output video/audio (input through HDMI jacks) to the TV when the unit is in standby mode. p.89
4K Upscaling
Enables/disables the upscaling function. p.89
HDCP Version
Selects the version of HDCP used on the HDMI input jacks. p.90
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input. p.90
Standby Sync
Selects whether to use HDMI control to link the standby behavior of the TV and the unit. p.90
ARC
Enables/disables ARC. p.90
SCENE
Enables/disables SCENE link playback. p.91
En
80
Menu Item Function Page
Sound
DSP Parameter
Center Spread
Selects whether to spread the center channel signals to left and right when a 2-channel source is played. p.92
Center Image
Adjusts the center localization (broadening effect) of the front sound field. p.92
Monaural Mix
Enables/disables monaural sound output. p.92
Lipsync
Select
Selects the method to adjust the delay between video and audio output. p.92
Adjustment
Adjusts the delay between video and audio output manually. p.93
Dialogue
Dialogue Level
Adjusts the volume of dialogue sounds. p.93
DTS Dialogue Control
Adjusts the volume of dialogue sounds for DTS content. p.93
Dialogue Lift
Adjusts the perceived height of dialogue sounds for the screen position. p.94
Volume
Scale
Switches the scale of the volume display. p.94
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. p.94
Max Volume
Sets the limit value of the volume. p.95
Initial Volume
Sets the initial volume for when this receiver is turned on. p.95
ZoneB Volume
Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A. p.95
ECO
Auto Power Standby
Set the amount of time for the auto-standby function. p.96
ECO Mode
Enables/disables the eco mode (power saving mode). p.96
Function
Input Rename
Changes the input source name displayed on the front display. p.97
Input Skip
Set which input sources are skipped when operating the INPUT key. p.98
Dimmer
Adjusts the brightness of the front display. p.98
Memory Guard
Prevents accidental changes to the settings. p.98
Remote Color Key
Set the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control. p.99
Network
Information
Displays the network information of the unit. p.100
Network Connection
Selects the network connection method. p.100
IP Address
Configures the network parameters (such as IP address). p.100
MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices. p.101
DMC Control
Selects whether to allow a Digital Media Controller (DMC) to control playback. p.102
Network Standby
Selects whether to enable/disable the function that turns on the unit from other network devices. p.102
Network Name
Edits the network name (the unit’s name on the network) displayed on other network devices. p.103
MusicCast Link Power Interlock
Selects whether turning on the power of the master device of the MusicCast network (this unit) also turns on the
power of other devices of the network.
p.103
Network Update
Updates the firmware via the network. p.103
En
81
Menu Item Function Page
Bluetooth
Bluetooth
Enables/disables the Bluetooth functions. p.104
Audio Receive
Disconnect
Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit. p.104
Bluetooth Standby
Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). p.104
Audio Send
Transmitter
Enables/disables the Bluetooth audio transmitter function. p.105
Device Search
Searches available Bluetooth devices (speakers/headphones) when the unit is used as a Bluetooth audio transmitter. p.105
Language
Select an on-screen menu language. p.106
En
82
Configuring the speaker settings
Setting your speaker system
Select the setting according to the speakers that are connected.
Setup menu
“Speaker” > “Configuration” > “Power Amp Assign”
Settings
Presence Select this option when you use presence speakers in the 5.1.2 system.
Sur.Back
Select this option when you use a normal speaker system (not using the
presence speakers, Zone B speakers or bi-amp connections).
BI-AMP
Select this option when you connect front speakers that support bi-amp
connections.
Zone B
Select this option when you use Zone B speakers in addition to the
speaker system in the main zone (Zone A).
5.1ch
Select this option when you don't use the SURROUND BACK/
PRESENCE/BI-AMP/ZONE B
terminals.
NOTE
For details on the speaker system, see the following:
▪ “Speaker systems and speakers to be connected” (p.16)
▪ “Connecting front speakers that support bi-amp connections” (p.24)
▪ “Playing back music in multiple rooms” (p.43)
Setting the use of a subwoofer
Selects the setting according to the use of your subwoofer.
Setup menu
“Speaker” > “Configuration” > “Subwoofer”
Settings
Use
Select this option when a subwoofer is connected.
The subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
None
Select this option when no subwoofer is connected.
The front speakers will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
Setting the size of the front speakers
Selects the setting according to the size of your front speakers.
Setup menu
“Speaker” > “Configuration” > “Front”
Settings
Small
Select this option for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “
Crossover
”).
Large
Select this option for large speakers.
The front speakers will produce all of the front channel frequency
components.
NOTE
▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6‑1/4”) or larger, or “Small” if it is smaller than 16 cm (6‑
1/4”).
▪ “Front” is automatically set to “Large” when “Subwoofer” is set to “None”. For details on “Subwoofer” in the
“Setup” menu, see the following:
– “Setting the use of a subwoofer” (p.83)
En
83
Setting the use of a center speaker and its size
Selects the setting according to the use and size of your center speaker.
Setup menu
“Speaker” > “Configuration” > “Center”
Settings
Small
Select this option for small speakers.
The subwoofer or front speakers will produce center channel low-
frequency components (configurable in “
Crossover”).
Large
Select this option for large speakers.
The center speaker will produce all of the center channel frequency
components.
None
Select this option when no center speaker is connected.
The front speakers will produce center channel audio.
NOTE
When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6.1/4”) or larger, or “Small
” if it is smaller than 16 cm (6.1/4”).
Setting the use of surround speakers and their size
Selects the setting according to the use and size of your surround speakers.
Setup menu
“Speaker” > “Configuration” > “Surround”
Settings
Small
Select this option for small speakers.
The subwoofer or front speakers will produce surround channel low-
frequency components (configurable in “
Crossover”).
Large
Select this option for large speakers.
The surround speakers will produce all of the surround channel frequency
components.
None
Select this option when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual CINEMA
DSP works in this case.
NOTE
▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6.1/4”) or larger, or “Small
” if it is smaller than 16 cm (6.1/4”).
▪ For details on Virtual CINEMA DSP, see the following:
– “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.39)
En
84
Setting the use of surround back speakers and their
size
Selects the setting according to the use and size of your surround back speakers
when “Power Amp Assign” in the “Setup” menu is set to “Sur.Back”.
Setup menu
“
Speaker” > “Configuration” > “Surround Back”
NOTE
For details on “Power Amp Assign” in the “Setup” menu, see the following:
▪ “Setting your speaker system” (p.83)
Settings
Small
Select this option for small speakers.
The subwoofer or front speakers will produce surround back channel low-
frequency components (configurable in “Crossover
”).
Large
Select this option for large speakers.
The surround back speakers will produce all of the surround back channel
frequency components.
None
Select this option when no surround back speakers are connected.
The surround speakers and subwoofer (or front speakers) will produce
surround back channel audio.
NOTE
▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6.1/4”) or larger, or “
Small
” if it is smaller than 16 cm (6.1/4”).
▪ When using surround back speakers, be sure to connect the surround back left and right speakers. Using
only one surround back speaker was discontinued.
▪ “Surround Back” is not available when “Virtual CINEMA FRONT” is set to “On”. For details on “Virtual
CINEMA FRONT” in the “Setup” menu, see the following:
– “Setting the use of Virtual CINEMA FRONT” (p.87)
Setting the use of presence speakers and their size
Selects the setting according to the use and size of your presence speakers when
“Power Amp Assign” in the “Setup” menu is set to “Presence”.
Setup menu
“
Speaker” > “Configuration” > “Presence”
NOTE
For details on “Power Amp Assign” in the “Setup” menu, see the following:
▪ “Setting your speaker system” (p.83)
Settings
Small
Select this option for small speakers.
The subwoofer or front speakers will produce presence channel low-
frequency components (configurable in “Crossover
”).
Large
Select this option for large speakers.
The presence speakers will produce all of the presence channel
frequency components.
None
Select this option when no presence speakers are connected.
The front speakers will produce presence channel audio.
NOTE
When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6.1/4”) or larger, or “
Small
” if it is smaller than 16 cm (6.1/4”).
En
85
Setting the layout of the presence speakers
Selects a presence layout when presence speakers are used. This setting facilitates
the optimization of the sound field effect.
Setup menu
“Speaker” > “Configuration” > “Layout”
Settings
Front Height Select this option when presence speakers are installed on the front wall.
Overhead Select this option when presence speakers are installed to the ceiling.
Dolby Enabled SP
Select this option when using the Dolby Enabled speakers as the
presence speakers.
NOTE
▪ This setting is not available when “Presence” is set to “None”. For details on “Presence” in the “Setup”
menu, see the following:
– “Setting the use of presence speakers and their size” (p.85)
▪ For details on the layouts of the presence speakers, see the following:
– “Presence speaker layout” (p.134)
Setting the crossover frequency of the low-frequency
components
Sets the lower limit of the low-frequency components that can be output from a
speaker whose size is set to “Small”. A frequency sound lower than the specified value
will be produced from the subwoofer or front speakers.
Setup menu
“
Speaker” > “Configuration” > “Crossover”
Settings
40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
NOTE
If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
Setting the phase of the subwoofer
Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch
the subwoofer phase.
Setup menu
“Speaker” > “Configuration” > “Subwoofer Phase”
Settings
Normal Does not reverse the subwoofer phase.
Reverse Reverses the subwoofer phase.
NOTE
This setting is not available when “Subwoofer” is set to “None”. For details on “Subwoofer” in the “Setup”
menu, see the following:
▪ “Setting the use of a subwoofer” (p.83)
Setting the use of Extra Bass
Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced
bass sounds, regardless of the size of the front speakers and the presence or
absence of the subwoofer.
Setup menu
“Speaker” > “Configuration” > “Extra Bass”
Settings
Off Disables Extra Bass.
On Enables Extra Bass.
NOTE
You can also use BASS on the remote control to enable/disable Extra Bass.
En
86
Setting the use of Virtual CINEMA FRONT
Selects whether to use Virtual CINEMA FRONT.
NOTE
Select “On” only when utilizing the Virtual CINEMA FRONT configuration. For details, see the following:
▪ “Using Virtual CINEMA FRONT” (p.23)
Setup menu
“Speaker” > “Configuration” > “Virtual CINEMA FRONT”
Settings
Off Disables Virtual CINEMA FRONT
On Enables Virtual CINEMA FRONT
NOTE
This setting is not available when “Surround” is set to “None”. For details on “Surround” in the “Setup” menu,
see the following:
▪ “Setting the use of surround speakers and their size” (p.84)
Setting the distance between each speaker and the
listening position
Sets the distance between each speaker and the listening position so that sounds from
the speakers reach the listening position at the same time.
Setup menu
“Speaker” > “Distance”
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Presence L
, Presence R, Subwoofer
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments
NOTE
Select the unit of distance from “Meter” or “Feet” in “Unit”.
Adjusting the volume of each speaker
Adjusts the volume of each speaker to suit your listening position.
Setup menu
“Speaker” > “Level”
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Presence L
,
Presence R, Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
NOTE
Test tone output helps you to adjust the speaker balance while confirming its effect. For details, see the
following:
▪ “Outputting test tones” (p.88)
En
87
Setting the equalizer
Selects the type of equalizer to be used and adjusts the tone.
Setup menu
“Speaker” > “Equalizer” > “EQ Select”
Settings
PEQ
Applies the parametric equalizer values obtained by the YPAO
measurement.
GEQ Select this option when you want to adjust the equalizer manually.
Off Does not use the equalizer.
When selecting “GEQ”
1
Use the cursor keys to select “Channel” and to select the desired
speaker channel.
2
Use the cursor keys to select the desired band (frequency) and to
adjust the gain.
Setting range
-6.0 dB to +6.0 dB
3
Press SETUP.
This completes the settings.
NOTE
▪ Test tone output helps you to adjust the equalizer while confirming its effect. For details, see the following:
– “Outputting test tones” (p.88)
▪ “PEQ” is available only when the YPAO has been performed. For details on the YPAO, see the following:
– “Optimizing the speaker settings automatically (YPAO)” (p.33)
Outputting test tones
Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Setup menu
“Speaker” > “Test Tone”
Settings
Off Does not output test tones.
On
Outputs test tones automatically when you adjust the speaker balance or
equalizer.
En
88
Configuring the HDMI settings
Setting the use of HDMI Control
Enables/disables HDMI Control. HDMI Control allows you to operate external devices
via HDMI.
Setup menu
“HDMI” > “HDMI Control”
Settings
Off Disables HDMI Control.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”, and
“SCENE”.
NOTE
To use HDMI control, you need to perform the HDMI Control link setup after connecting HDMI Control-
compatible devices. For details, see the following:
▪ “HDMI Control and synchronized operations” (p.141)
Setting the output of HDMI audio from the TV
speaker
Enables/disables audio output from a TV connected to the HDMI OUT jack when
“HDMI Control” is set to “Off”.
NOTE
For details on “HDMI Control” in the “Setup” menu, see the following:
▪ “Setting the use of HDMI Control” (p.89)
Setup menu
“HDMI” > “Audio Output”
Settings
Off Disables audio output from the TV.
On Enables audio output from the TV.
Setting the use of HDMI Standby Through
Select whether to output video/audio (input through HDMI jacks) to the TV when the
unit is in standby mode.
NOTE
If this function is set to “On” or “Auto”, you can use the input selection keys (HDMI 1–4) to select an HDMI
input even when the unit is in standby mode (the standby indicator on the unit blinks).
Setup menu
“HDMI” > “Standby Through”
Settings
Off Does not output video/audio to the TV.
Auto
Automatically selects whether to output video/audio depending on the
status of the connected device.
On
Outputs video/audio to the TV.
(The unit consumes more power than when “
Off
” or “Auto” is selected.)
NOTE
▪ “Off” is not selectable when “HDMI Control” is set to “On”.
▪ For details on “HDMI Control” in the “Setup” menu, see the following:
– “Setting the use of HDMI Control” (p.89)
Setting the use of 4K upscaling of the HDMI video
signal
Enables/disables the upscaling function. When it is enabled, 1080p content is
displayed at 4K resolution.
Setup menu
“HDMI” > “4K Upscaling”
Settings
Off Disables the upscaling function.
On Enables the upscaling function.
En
89
Setting the version of HDCP used on the HDMI input
jacks
Selects the HDCP version of the HDMI input jacks for watching 4K video content.
Setup menu
“HDMI” > “HDCP Version”
Input sources
HDMI 1–4
Settings
Auto Automatically sets the version of HDCP according to content.
1.4 Sets the version of HDCP to always be 1.4.
Setting the audio jack used for TV audio input
Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control
” is set to “
On”. The unit’s input source automatically switches to TV audio when
the TV input is switched to its built-in tuner.
NOTE
For details on “HDMI Control” in the “Setup” menu, see the following:
▪ “Setting the use of HDMI Control” (p.89)
Setup menu
“HDMI” > “TV Audio Input”
Settings
AV 1–3, AUDIO 1–3
NOTE
When using ARC to input TV audio to the unit, the input jacks selected here will be used for TV Audio Input.
Linking the standby modes of the unit and the TV
Select whether to use HDMI control to link the unit's standby mode to the TV's power
when “HDMI Control” is set to “On”.
NOTE
For details on “HDMI Control” in the “Setup” menu, see the following:
▪ “Setting the use of HDMI Control” (p.89)
Setup menu
“HDMI” > “Standby Sync”
Settings
Off Does not set the unit to standby mode when the TV is turned off.
On Sets the unit to standby mode when the TV is turned off.
Auto
Sets the unit to standby mode when the TV is turned off only when the unit
is receiving TV audio or HDMI signals.
Setting the use of ARC
Select whether to output TV audio to the speakers connected to the unit when “HDMI
Control” is set to “
On”.
NOTE
For details on “HDMI Control” in the “Setup” menu, see the following:
▪ “Setting the use of HDMI Control” (p.89)
Setup menu
“HDMI” > “ARC”
Settings
Off Disables ARC.
On Enables ARC.
NOTE
You do not need to change this setting normally. In case noises are produced from the speakers connected
to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off”
and use the TV’s speakers.
En
90
Setting the use of SCENE link playback
Enables/disable SCENE link playback when “HDMI Control” is set to “On”.
When SCENE link playback is enabled, HDMI Control-compatible devices connected
to the unit via HDMI automatically work as follows when a scene is selected.
• TV: turning on and displaying video from the playback device
• Playback device: starting playback
NOTE
For details on “HDMI Control” in the “Setup” menu, see the following:
▪ “Setting the use of HDMI Control” (p.89)
Setup menu
“HDMI” > “SCENE”
Choices (SCENE keys)
BD / DVD, TV, NET, RADIO
Settings
Off Disables SCENE link playback for the selected SCENE key.
On Enables SCENE link playback for the selected SCENE key.
NOTE
SCENE link playback may not work properly due to the compatibility between devices. We recommend using
TV and playback devices from the same manufacturer so that HDMI Control works more effectively.
En
91
Configuring the sound settings
Setting the use of Center Spread
Selects whether to spread the center channel signals to left and right when a 2-
channel source is played. This setting is effective when “bDsur” is selected.
Setup menu
“
Sound” > “DSP Parameter” > “Center Spread”
Settings
Off Disables Center Spread.
On Enables Center Spread.
NOTE
▪ If you feel the center sound is too strong, set this function to “On”.
▪ For details on the surround decoder, see the following:
– “Selecting the surround decoder used in the program” (p.71)
Adjusting the center localization (broadening effect)
of the front sound field
Adjusts the center localization (broadening effect) of the front sound field. Adjust this
higher to strengthen the center localization (less broadening effect) or lower to weaken
it (more broadening effect). This setting is effective when “Neo:6 Music
” is selected.
Setup menu
“Sound” > “DSP Parameter” > “Center Image”
Setting range
0.0 to 1.0
NOTE
For details on the surround decoder, see the following:
▪ “Selecting the surround decoder used in the program” (p.71)
Setting the use of Monaural Mix
Enables/disables monaural sound output. This function can be applicable when the
sound program is set to “7ch Stereo” only.
Setup menu
“Sound” > “DSP Parameter” > “Monaural Mix”
Settings
Off Disables monaural sound output.
On Enables monaural sound output.
Setting the adjustment method of the Lipsync
function
Selects the method for adjusting the delay between video and audio output.
Setup menu
“Sound” > “Lipsync” > “Select”
Settings
Manual
Select this option when you want to adjust the delay between video and
audio output manually.
Adjust the audio output timing in “Adjustment”.
Auto
Adjusts the delay between video and audio output automatically when a
TV that supports an automatic lipsync function is connected to the unit via
HDMI.
If necessary, you can fine-adjust the audio output timing in “Adjustment”.
NOTE
▪ You can enable/disable the Lipsync function by input sources in “Lipsync” in the “Option” menu. For
details, see the following:
– “Enabling Lipsync adjustment” (p.73)
▪ For details on “Adjustment” in the “Setup” menu, see the following:
– “Adjusting the delay of the Lipsync function” (p.93)
En
92
Adjusting the delay of the Lipsync function
Adjusts the delay between video and audio output manually when “Select” is set to
“Manual”. You can fine-adjust the audio output timing when “
Select” is set to “Auto”.
Setup menu
“Sound” > “Lipsync” > “Adjustment”
Setting range
0 ms to 500 ms (1 ms increments)
NOTE
For details on “Select” in the “Setup” menu, see the following:
▪ “Setting the adjustment method of the Lipsync function” (p.92)
Adjusting the volume of dialogue sound
Adjusts the volume of dialogue sounds that are hardly heard.
Setup menu
“Sound” > “Dialogue” > “Dialogue Level”
Setting range
0 to 3 (higher to strengthen)
NOTE
This setting is not available when one of the following conditions is met.
▪ Dolby Atmos content or DTS:X content is played back.
▪ The Dolby Surround or Neural:X decoder is working.
Adjusting the volume of dialogue sound during
DTS:X™ playback
Adjusts the volume of dialogue sounds that are hardly heard for DTS:X content.
Setup menu
“Sound” > “Dialogue” > “DTS Dialogue Control”
Setting range
0 to 6 (higher to strengthen)
NOTE
This setting is available only when DTS:X content which supports the DTS Dialogue Control feature is played
back.
En
93
Adjusting the perceived height of dialogue sound
Adjusts the perceived height of dialogue sounds when the position (height) of dialogue
sound is artificial. If the dialogue sounds as if it is coming from below the screen, you
can raise its perceived height by increasing this setting.
NOTE
This setting is available only when one of the following conditions is met.
▪ One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when presence speakers
are used.
▪ Virtual Presence Speaker (VPS) is working.
(You may hear dialogue sounds from the surround speakers depending on the listening position.)
Setup menu
“Sound” > “Dialogue” > “Dialogue Lift”
Setting range
0 to 5 (The bigger the value the higher the position)
Ideal position
Setting the scale of the volume display
Switches the scale of the volume display.
Setup menu
“Sound” > “Volume” > “Scale”
Settings
dB Displays the volume in the “dB” unit.
0-97 Displays the volume in the numeric value (0.5 to 97.0).
Setting the dynamic range adjustment method
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Setup menu
“Sound” > “Volume” > “Dynamic Range”
Settings
Maximum Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Min/Auto
Sets the dynamic range for clear sound even at night or at low volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
En
94
Setting the limit value of the volume
Sets the limit value of the volume adjusted by using such as VOLUME keys on the
remote control.
Setup menu
“Sound” > “Volume” > “Max Volume”
Setting range
-60.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [20.0 to 95.0 (5.0 increments),
97.0]
Setting the initial volume for when the unit is turned
on
Sets the initial volume when the unit is turned on.
Setup menu
“Sound” > “Volume” > “Initial Volume”
Settings
Off
Sets the level to the volume level of the unit when it last entered standby
mode.
Mute Sets the unit to mute the audio output.
-80.0 dB to +16.5 dB
(0.5 dB increments)
[0.5 to 97.0
(0.5 increments)]
Sets the level to the specified volume level.
NOTE
This setting works only when the volume level is set lower than “Max Volume”. For details on “Max Volume” in
the “Setup” menu, see the following:
▪ “Setting the limit value of the volume” (p.95)
Adjusting the volume for Zone B in conjunction with
the volume for Zone A
Selects whether to adjust the volume for Zone B in conjunction with the volume for
Zone A.
Setup menu
“Sound” > “Volume” > “ZoneB Volume”
Settings
Sync. Adjusts the volume for Zone B in conjunction with the volume for Zone A.
Async.
Does not adjust the volume for Zone B in conjunction with the volume for
Zone A. Adjust the volume for Zone B separately.
NOTE
If “ZoneB Volume” is set to “Async.”, the volume for Zone B is temporarily set to -40 dB. As necessary, adjust
the volume using the remote control. For details, see the following:
▪ “Adjusting the volume for Zone B separately” (p.45)
En
95
Configuring the power supply settings
Setting the amount of time for the auto-standby
function
Set the amount of time for the auto-standby function.
Setup menu
“ECO” > “Auto Power Standby”
Settings
Off Does not set the unit to standby mode automatically.
5 minutes, 20 minutes
Sets the unit to standby mode when you have not operated the unit and
the unit has not detected any input signal for the specified time.
2 hours, 4 hours,
8 hours, 12 hours
Sets the unit to standby mode when you have not operated the unit for the
specified time.
NOTE
Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front
display.
Setting the use of the eco mode
You can reduce the unit’s power consumption by setting the eco mode to “On”. After
changing the setting, be sure to press ENTER to restart the unit.
When the eco mode is enabled, you can reduce the unit’s power consumption.
Setup menu
“
ECO” > “ECO Mode”
Settings
Off Disables the eco mode.
On Enables the eco mode.
NOTE
▪ When “ECO Mode” is set to “On”, the front display may become dark.
▪ If you want to play audio at high volume, set “ECO Mode” to “Off”.
En
96
Configuring the function settings
Automatically changing the input source names
displayed on the front display
Automatically changes the input source names displayed on the front display. You can
select a name created by the Auto Rename function.
Setup menu
“Function” > “Input Rename”
Input sources
HDMI 1-4, AV 1-3, AUDIO 1-2
1
Use the cursor keys to select an input source to be renamed.
2
Use the cursor keys to select “Auto”.
3
To change another input source name, repeat steps 1 to 2.
4
Press SETUP.
This completes the settings.
NOTE
When “Auto” is selected, the created name is saved even after the external device is disconnected. To reset
to the default setting, switch the setting to “Manual
” and then back to “Auto”.
Manually changing the input source names
displayed on the front display
Allows the input source names displayed on the front display to be set manually.
Setup menu
“Function” > “Input Rename”
Input sources
HDMI 1-4, AV 1-3, AUX, AUDIO 1-3, TUNER, MusicCast Link, SERVER, NET RADIO,
USB
1
Use the cursor keys to select an input source to be renamed.
2
Use the cursor keys to select “Manual” and press ENTER.
The edit screen is displayed.
3
Use the cursor keys and ENTER key to edit the name, and then
select “OK” and press ENTER.
NOTE
▪ To cancel the entry, select “CANCEL”.
▪ If you select "RESET", the default input name will be inserted into the editing area.
4
To change another input source name, repeat steps 1 to 3.
5
Press SETUP.
This completes the settings.
En
97
Setting input sources to be skipped when operating
the INPUT key
Set which input sources are skipped when operating the INPUT key.
You can select the desired input source quickly by using this function.
Setup menu
“Function” > “Input Skip”
Input sources
HDMI 1-4, AV 1-3, AUX, AUDIO 1-3, TUNER, NET, Bluetooth, USB
Settings
Off Does not skip the selected input source.
On Skips the selected input source.
NOTE
When using AV CONTROLLER, you cannot select the input sources set to “On” in this function.
Adjusting the brightness of the front display
Adjusts the brightness of the front display.
Setup menu
“Function” > “Dimmer”
Setting range
-4 to 0 (higher to brighten)
NOTE
The front display may become dark when “ECO Mode” is set to “On”. For details, see the following:
▪ “Setting the use of the eco mode” (p.96)
Preventing accidental changes to the settings
Prevents accidental changes to the settings.
Setup menu
“Function” > “Memory Guard”
Settings
Off Does not protect the settings.
On Protects the settings until “Off” is selected.
NOTE
When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.
En
98
Setting the unit's functions for the RED/GREEN/
YELLOW/BLUE keys of the remote control
Set the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.
Setup menu
“Function” > “Remote Color Key”
Settings
Default
Assigns the functions of devices connected to the unit with an HDMI
cable.
This setting is effective when “HDMI Control” is set to “On”.
Input
Assigns the unit's input sources to each key. The assigned input sources
can be set separately.
Input sources
HDMI 1-4, AV 1-3, AUX, AUDIO 1-3, TUNER, NET, Bluetooth, USB
Default
RED: HDMI2, GREEN: HDMI4, YELLOW: AV 2, BLUE: AUX
Program
Assigns the functions of sound mode to each key.
RED: MOVIE
GREEN: MUSIC
YELLOW: STEREO
BLUE: SUR.DECODE
TV Control
Assigns the functions of TV Control to each key.
RED: EXIT (closes the menu on the TV)
GREEN: INFO (displays information about the TV such as the resolution)
YELLOW: BROADCAST (switches the TV broadcast type)
BLUE: INPUT (switches the TV input)
This setting is effective when “HDMI Control” is set to “On”.
NOTE
▪ For details on “HDMI Control” in the “Setup” menu, see the following:
– “Setting the use of HDMI Control” (p.89)
▪ To use HDMI control, you need to perform the HDMI Control link setup after connecting HDMI Control-
compatible devices. For details, see the following:
– “HDMI Control and synchronized operations” (p.141)
▪ HDMI Control might not work properly.
En
99
Configuring the network settings
Checking the network information of the unit
Displays the network information of the unit.
Setup menu
“Network” > “Information”
Status The connection status of the NETWORK jack
Connection Connection method
SSID The access point to which the unit is connected
MusicCast Network Readiness or not for the MusicCast Network
MAC Address (Ethernet)
MAC address
MAC Address (Wi-Fi)
IP Address IP address
Subnet Mask Subnet mask
Default Gateway The IP address of the default gateway
DNS Server (P) The IP address of the primary DNS server
DNS Server (S) The IP address of the secondary DNS server
Setting the network connection method (Wired/
Wireless)
Selects the network connection method.
Setup menu
“Network” > “Network Connection”
Choices
Wired
Select this option when you want to connect the unit to a network with
a commercially-available network cable.
Wireless(Wi-Fi)
Select this option when you want to connect the unit to a network via
the wireless router (access point).
NOTE
For details on the network connection, see the following:
▪ “Preparing for connecting to a network” (p.29)
Setting the network parameters automatically
(DHCP)
Set the network parameters (such as IP address, Subnet Mask, and Default Gateway)
automatically using a DHCP server.
Setup menu
“Network” > “IP Address” > “DHCP”
Settings
Off Does not use a DHCP server. Configure the network parameters manually.
On
Uses a DHCP server to automatically obtain the unit’s network parameters
(such as IP address).
En
100
Setting the network parameters manually
Set the network parameters (such as IP address, Subnet Mask, and Default Gateway)
manually.
Setup menu
“Network” > “IP Address”
1
Set “DHCP” to “Off”.
2
Use the cursor keys to select a parameter type.
IP Address Specifies an IP address.
Subnet Mask Specifies a subnet mask.
Default Gateway Specifies the IP address of the default gateway.
DNS Server (P) Specifies the IP address of the primary DNS server.
DNS Server (S) Specifies the IP address of the secondary DNS server.
3
Use the cursor keys to move the edit position and to select a
value.
4
To set another parameter, press RETURN and repeat steps 2 to 3.
5
Press SETUP.
This completes the settings.
Setting the MAC address filter
Sets the MAC address filter to limit access to the unit from other network devices.
NOTE
▪ Operation of the AirPlay function or the DMC is not limited by this setting.
▪ You can specify up to 10 network devices that are permitted to access the unit.
Setup menu
“Network” > “MAC Address Filter” > “Filter”
Settings
Off Disables the MAC address filter.
On
Enables the MAC address filter. Specify the MAC addresses of the
network devices that will be permitted access to the unit.
When selecting “On”
1
Use the cursor keys to select an MAC address number.
2
Use the cursor keys to move the edit position and to select a
value.
3
To specify another MAC address, press RETURN and repeat steps
1 to 2.
4
Press SETUP.
This completes the settings.
En
101
Setting the use of a Digital Media Controller
Selects whether to allow a Digital Media Controller (DMC) to control playback. A Digital
Media Controller (DMC) is a device that can control other network devices through the
network. When this function is enabled, you can control playback of the unit from
DMCs (such as Windows Media Player 12) on the same network.
Setup menu
“Network” > “DMC Control”
Settings
Disable Does not allow DMCs to control playback.
Enable Allows DMCs to control playback.
Setting the use of the Network Standby function
Selects whether the unit can be turned on from other network devices (network
standby).
Setup menu
“Network” > “Network Standby”
Settings
Off Disables the network standby function.
On
Enables the network standby function.
(The unit consumes more power than when “Off” is selected.)
Auto
Enables the network standby function.
(If “Network Connection” is set to “Wired”, the unit is set to the power
saving mode when the network cable is disconnected.)
With an advanced energy saving design, this product achieves a low power
consumption of not more than two watts when in Network Standby mode.
En
102
Setting the network name of the unit
Edits the network name (the unit’s name on the network) displayed on other network
devices.
Setup menu
“Network” > “Network Name”
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER key to edit the name.
3
Select “OK” to confirm the new name and press ENTER.
4
Press SETUP.
This completes the settings.
Setting the power interlock from the unit to
MusicCast compatible devices
Selects whether turning on the power of the master device of the MusicCast network
(this unit) also turns on the power of other devices of the network.
Setup menu
“Network” > “MusicCast Link Power Interlock”
Settings
Off Disables the power interlock from the unit (MusicCast master).
On Enables the power interlock from the unit (MusicCast master).
Updating the firmware via the network
Updates the firmware via the network. You can select “Perform Update” after the unit is
ready for firmware update. You can also check the firmware version and system ID.
Setup menu
“Network” > “Network Update”
NOTE
▪ Firmware update takes about 20 minutes or more.
▪ If the Internet connection speed is slow, or the unit is connected to the wireless network, network update
may not be possible depending on the condition of the network. In this case, wait until firmware update is
ready, or update the firmware using the USB memory device. For details on using the USB memory
device, see the following:
– “Updating the firmware (UPDATE)” (p.111)
En
103
Configuring the Bluetooth® settings
Setting the use of Bluetooth®
Enables/disables the Bluetooth function.
Setup menu
“Bluetooth” > “Bluetooth”
Settings
Off Disables the Bluetooth function.
On Enables the Bluetooth function.
Terminating the connection between a Bluetooth®
device and the unit
Terminates the Bluetooth connection between a Bluetooth device (such as a
smartphone) and the unit.
Setup menu
“Bluetooth” > “Audio Receive” > “Disconnect”
Select “Disconnect” and press ENTER to terminate the Bluetooth connection.
NOTE
This setting is not available when no Bluetooth devices are connected.
Setting the use of the Bluetooth® Standby function
Selects whether to enable/disable the function that turns on the unit from Bluetooth
devices (Bluetooth standby). If this function is set to “On”, the unit automatically turns
on when a connect operation is performed on the Bluetooth device.
Setup menu
“Bluetooth” > “Audio Receive” > “Bluetooth Standby”
Settings
Off Disables the Bluetooth standby function.
On
Enables the Bluetooth standby function.
(The unit consumes more power than when “
Off” is selected.)
NOTE
This setting is not available when “Network Standby” is set to “Off”. For details, see the following:
▪ “Setting the use of the Network Standby function” (p.102)
En
104
Setting the use of audio transmission to a Bluetooth®
device
Enables/disables the Bluetooth audio transmitter function.
When this function is enabled, you can enjoy audio played back on the unit using
Bluetooth speakers/headphones.
Setup menu
“Bluetooth” > “Audio Send” > “Transmitter”
Settings
Off Disables the Bluetooth audio transmitter function.
On Enables the Bluetooth audio transmitter function.
NOTE
For details on connecting Bluetooth devices to which audio is transmitted (speakers, headphones, etc.), see
the following:
▪ “Connecting the unit to a Bluetooth
®
device that receives transmitted audio”
(p.105)
Connecting the unit to a Bluetooth® device that
receives transmitted audio
Establishes a connection between the unit and Bluetooth devices that receive audio
transmitted from the unit, such as speakers and headphones, when "Transmitter" is set
to "On" in the "
Setup" menu.
NOTE
For details on “Transmitter” in the “Setup” menu, see the following:
▪ “Setting the use of audio transmission to a Bluetooth
®
device” (p.105)
Setup menu
“Bluetooth” > “Audio Send” > “Device Search”
1
Press ENTER.
A list of Bluetooth devices that can connect to the unit is displayed.
2
Use the cursor keys to select the Bluetooth speakers/headphones
to be connected with the unit and press ENTER.
When the connection process finishes, “Completed” appears.
3
Press ENTER.
This completes the settings.
NOTE
▪ If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to pairing mode and
then perform “Device Search” operation again.
▪ To terminate the Bluetooth connection, perform a disconnect operation on the Bluetooth speakers/
headphones.
En
105
Configuring the language settings
Setting the on-screen menu language
Select the on-screen menu language.
Setup menu
“Language”
Settings
English English
日本語 Japanese
Français French
Deutsch German
Español Spanish
Русский Russian
Italiano Italian
中文 Chinese
NOTE
The information on the front display is provided in English only.
En
106
Configuring the advanced settings (ADVANCED SETUP menu)
Basic operation of the ADVANCED SETUP menu
Perform the following basic procedure to operate the “ADVANCED SETUP” menu while
viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z (power).
(power)
z
STRAIGHTPROGRAM
The top item and its setting of the “ADVANCED SETUP” menu appear on
the front display.
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press z (power) to set the unit to standby mode and turn it on
again.
This completes the settings.
NOTE
For details on the default settings, see the following:
▪ “Default settings of the ADVANCED SETUP menu” (p.150)
ADVANCED SETUP menu items
Use the following table to configure system settings of the unit.
Item Function Page
SP IMP.
(U.S.A. and Canada models only)
Changes the speaker impedance setting.
p.108
REMOTE ID Selects the unit’s remote control ID. p.108
TU
(Asia, Taiwan, Brazil, General, and Central and South America
models only)
Changes the FM/AM tuning frequency setting.
p.108
TV FORMAT Switches the video signal type of HDMI output. p.108
4K MODE Selects the HDMI 4K signal format. p.109
DTS MODE
Selects the information to be sent to the BD player connected to
the unit about the DTS formats that the unit supports.
p.109
BKUP/RSTR Backups and restores all the settings for the unit. p.110
INIT Restores the default settings. p.111
UPDATE Updates the firmware. p.111
VERSION Checks the version of firmware currently installed on the unit. p.111
En
107
Changing the speaker impedance setting (SP IMP.)
(U.S.A. and Canada models only)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
SP IMP.••8¬MIN
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
ADVANCED SETUP menu
“SP IMP.”
Settings
6 Ω MIN Select this option when you connect 6-ohm speakers to the unit.
8 Ω MIN Select this option when you connect 8-ohm or higher speakers to the unit.
Selecting the remote control ID (REMOTE ID)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
REMOTE ID••ID1
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with
a unique remote control ID for its corresponding receiver.
ADVANCED SETUP menu
“REMOTE ID”
Settings
ID1, ID2
Changing the remote control ID of the remote control
• To select ID1, while holding down the left cursor key, hold down SCENE (BD/DVD)
for 5 seconds.
• To select ID2, while holding down the left cursor key, hold down SCENE (TV) for 5
seconds.
Changing the FM/AM tuning frequency setting (TU)
(Asia, Taiwan, Brazil, General, and Central and South America models only)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
TU••••FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
ADVANCED SETUP menu
“TU”
Settings
FM100/AM10
Select this when you want to adjust the FM frequency by 100-kHz steps
and AM by 10-kHz steps.
FM50/AM9
Select this when you want to adjust the FM frequency by 50-kHz steps
and AM by 9-kHz steps.
Switching the video signal type (TV FORMAT)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
TV FORMAT•NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
ADVANCED SETUP menu
“TV FORMAT”
Settings
NTSC, PAL
En
108
Selecting the HDMI 4K signal format (4K MODE)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
4K MODE•MODE 1
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and
playback device are connected to the unit.
ADVANCED SETUP menu
“4K MODE”
Settings
MODE 1
Inputs/outputs 4K signals shown in the following table. Depending on the
connected device or HDMI cables, video may not be displayed correctly.
In this case, select “MODE 2”.
MODE 2 Inputs/outputs 4K signals shown in the following table.
NOTE
When “MODE 1” is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with
Ethernet.
Format
MODE 1 MODE 2
8 bit 10 bit 12 bit 8 bit 10 bit 12 bit
4K/60, 50 Hz
RGB 4:4:4
4
– –
YCbCr 4:4:4
4
– –
YCbCr 4:2:2
4
–
YCbCr 4:2:0
4 4
–
4K/30, 25, 24 Hz
RGB 4:4:4
4 4
–
YCbCr 4:4:4
4 4
–
YCbCr 4:2:2
4 4
Setting DTS Format Notification (DTS MODE)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3B2A
VOL.
FPR
SL
SW
SR
SBL SB SBR
FPL
MUTE VIRTUAL
DTS MODE•MODE1
This setting informs the BD player about the DTS formats that the unit supports.
ADVANCED SETUP menu
“DTS MODE”
Settings
MODE 1
This mode conforms to the DTS:X standard.
Use this setting under normal circumstances.
MODE 2
Use this setting if the BD player fails to properly output a DTS signal even
when it is playing back DTS-HD or DTS:X content.
En
109
Backuping and restoring all the settings (BKUP/RSTR)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
BKUP/RSTR•BKUP
Backups and restores all the unit's setting to a USB memory device. Prepare a USB
memory device using FAT16 or FAT32 format in advance.
ADVANCED SETUP menu
“BKUP/RSTR”
Settings
RSTR Restores all the previous backuped settings.
BKUP Backups all the settings.
1
Connect the USB memory device to the USB jack on the front
panel.
2
To start the process, press STRAIGHT to select “BKUP” or
“RSTR” and then press INFO on the front panel.
3
Press INFO again after the confirmation message appears on the
front display.
4
When “Complete” appears on the front display, press z (power)
to set the unit to standby mode and turn it on again.
If “Failed” appears on the front display, check the following and start the
process again.
In case of “BKUP”:
• You cannot overwrite save. When you save the settings repeatedly, please move the
file in different folder.
• The file is stored by the name of “MC_backup_(model name).dat” in the route of the
USB memory device.
In case of “RSTR”:
• Check that the file is stored in the route of the USB memory device.
NOTE
▪ “RSTR” is effective after backuping all the settings.
▪ Do not turn off the unit during the backuping and restoring process. Otherwise, the settings may not be
restored correctly.
▪ The user information (such as account, password) is not saved.
En
110
Restoring the default settings (INIT)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
INIT••••CANCEL
Restores the default settings for the unit.
ADVANCED SETUP menu
“INIT”
Choices
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
Updating the firmware (UPDATE)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
UPDATE•••••USB
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from our website to a USB memory
device. You can update the firmware using this USB memory device. For details, refer
to the information supplied with updates.
ADVANCED SETUP menu
“UPDATE”
Choices
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
NOTE
Do not perform this menu unless firmware update is necessary. Also, make sure you read the information
supplied with updates before updating the firmware.
Checking the firmware version (VERSION)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRTU AL
VERSION••xx.xx
Check the version of firmware currently installed on the unit.
ADVANCED SETUP menu
“VERSION”
En
111
TROUBLESHOOTING
When any problem appears
If trouble occurs, first check the following:
Make sure of the following when the unit does not function properly.
• The power cables of the unit, TV and playback devices (such as BD/DVD players)
are connected to AC wall outlets securely.
• The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned
on.
• The connectors of each cable are securely inserted in to jacks on each device.
If there is no problem with the power and cables, refer to the instructions shown in
“When any problem appears” corresponding to the trouble of the unit.
If the problem you are experiencing is not listed or if the instructions do not help, turn
off the unit, disconnect the power cable, and contact the nearest authorized Yamaha
dealer or service center.
Power, system, or remote control trouble
n
The power does not turn on
l The protection circuitry has been activated three times consecutively.
If the standby indicator on the unit blinks when you try to turn on the power, as a
safety precaution, capability to turn on the power is disabled. Contact your nearest
Yamaha dealer or service center to request repair.
n
The power does not turn on in synchronization with the
TV
l HDMI Control on the unit is disabled.
If turning off the unit is not synchronized to the TV either, check the setting of HDMI
Control on the unit. For details on HDMI Control, see the following:
– “Setting the use of HDMI Control” (p.89)
l HDMI Control on the TV is disabled.
If only turning on the unit is not synchronized to the TV, check the setting on the
TV. For details, refer to the instruction manual for the TV and set HDMI Control on
the TV.
l Because of a power failure, the unit's power is no longer synchronized.
Disconnect the HDMI cables and power cables, and after five minutes, reconnect
the cables of playback devices first, then the unit, and then the TV. Then, check
that the power is synchronized.
n
The power does not turn off
l The internal microcomputer has frozen, due to an external electric shock (such
as lightning or excessive static electricity) or to a drop in the power supply
voltage.
Hold down z (power) on the front panel for more than 15 seconds to reboot the
unit. If the problem persists, disconnect the power cable from the AC wall outlet
and plug it again.
En
112
n
The power turns off (standby mode) immediately
l The unit was turned on while a speaker cable was shorted.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers. For details, see the following:
– “Connecting the speaker” (p.17)
n
The unit enters standby mode automatically
l The sleep timer worked.
Turn on the unit and start playback again.
l The auto-standby function activated because the unit was not used for the
specified time.
To disable the auto-standby function, set “Auto Power Standby” in the “Setup”
menu to “Off”. For details, see the following:
– “Setting the amount of time for the auto-standby function” (p.96)
l The speaker impedance setting is incorrect.
Set the speaker impedance to match your speakers. For details, see the following:
– “Changing the speaker impedance setting (SP IMP.)” (p.108)
l The protection circuitry has been activated because of a short circuit.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers. For details, see the following:
– “Connecting the speaker” (p.17)
n
The unit is not reacting
l The internal microcomputer is frozen, due to an external electric shock (such
as lightning or excessive static electricity) or to a drop in the power supply
voltage.
Hold down z (power) on the front panel for more than 15 seconds to reboot the
unit. If the problem persists, disconnect the power cable from the AC wall outlet
and plug it again.
n
The unit cannot be controlled using the remote control
l The unit is out of the operating range.
Use the remote control within the operating range. For details, see the following:
– “Operating range of the remote control” (p.7)
l The batteries are weak.
Replace with new batteries.
l The unit’s remote control sensor is exposed to direct sunlight or strong
lighting.
Adjust the lighting angle, or reposition the unit.
l The remote control IDs of the unit and the remote control are not identical.
Change the remote control ID of the unit or the remote control. For details, see the
following:
– “Selecting the remote control ID (REMOTE ID)” (p.108)
l The remote control is set to the Zone B operation mode.
Set the remote control to the Zone A operation mode. For details, see the following:
– “Part names and functions of the remote control” (p.14)
En
113
n
Cannot select the desired input source even if “INPUT”
is pressed
l The function which skips some input sources is set.
Set “Input Skip” of the desired input source in the “Setup” menu to “Off”. For
details, see the following:
– “Setting input sources to be skipped when operating the INPUT key” (p.98)
n
The RED/GREEN/YELLOW/BLUE keys of the remote
control do not operate
l The device which is connected to the unit via HDMI does not support the
operation of the RED/GREEN/YELLOW/BLUE keys.
Use a device which supports the operation of the RED/GREEN/YELLOW/BLUE
keys.
l The settings of the RED/GREEN/YELLOW/BLUE keys of the unit's remote
control have been changed.
Set the “Remote Color Key” settings in the “Setup” menu to “Default”. For details,
see the following:
– “Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the
remote control”
(p.
99)
Audio trouble
n
No sound
l Another input source is selected.
Select an appropriate input source with the input selection keys. For details, see
the following:
– “Basic procedure for playing back video and music” (p.46)
l Signals that the unit cannot reproduce are being input.
Some digital audio formats cannot be played back on the unit. Ensure that the
signals are types that the unit is able to play back. For details on supported file
formats, HDMI audio formats or compatible decoding format, see the following:
– “Supported file formats” (p.139)
– “Specifications” (p.145)
l Zone B is disabled.
Slide the Zone switch to “ZONE B”, and then operate Zone B. For details, see the
following:
– “Operating the Zone B” (p.44)
l The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
n
The volume cannot be increased
l The maximum volume is set too low.
Use “Max Volume” in the “Setup” menu to adjust the maximum volume. For details,
see the following:
– “Setting the limit value of the volume” (p.95)
l A device connected to the output jacks of the unit is not turned on.
Turn on all devices connected to the output jacks of the unit.
En
114
n
No sound is coming from a specific speaker
l The playback source does not contain a signal for the channel.
To check it, use “Signal Information” in the “Option” menu. For details, see the
following:
– “Checking information about the video/audio signals” (p.74)
l The currently selected sound program/decoder does not use the speaker.
To check it, use “Test Tone” in the “Setup” menu. For details, see the following:
– “Outputting test tones” (p.88)
l Audio output of the speaker is disabled.
Perform YPAO or use “Configuration” in the “Setup” menu to change the speaker
settings. For details, see the following:
– “Optimizing the speaker settings automatically (YPAO)” (p.33)
– “Setting the use of a subwoofer” (p.83)
– “Setting the size of the front speakers” (p.83)
– “Setting the use of a center speaker and its size” (p.84)
– “Setting the use of surround speakers and their size” (p.84)
– “Setting the use of surround back speakers and their size” (p.85)
– “Setting the use of presence speakers and their size” (p.85)
l The volume of the speaker is set too low.
Perform YPAO or use “Level” in the “Setup” menu to adjust the speaker volume.
For details, see the following:
– “Optimizing the speaker settings automatically (YPAO)” (p.33)
– “Adjusting the volume of each speaker” (p.87)
l The speaker cable connecting the unit and the speaker is defective.
Check the unit’s SPEAKERS terminals and the speaker’s terminals. If there is no
problem with the connection, replace a breaking speaker cable with another
speaker cable.
l The speaker is malfunctioning.
To check it, replace with another speaker. If the problem persists with using
another speaker, the unit may be malfunctioning.
n
No sound is coming from the surround back speaker
l “Power Amp Assign” is not set to “Sur.Back”.
When “Power Amp Assign” in the “Setup” menu is set to “Presence”, “BI-AMP”,
“Zone B” or “5.1ch
”, you cannot use the surround back speakers. To use the
surround back speakers, set “Power Amp Assign” to “Sur.Back”. For details, see
the following:
–
“Setting your speaker system” (p.83)
n
No sound is coming from the subwoofer
l The playback source does not contain Low Frequency Effect (LFE) or low-
frequency signals.
To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the
front channel low-frequency components from the subwoofer. For details, see the
following:
– “Setting the use of Extra Bass” (p.86)
l Subwoofer output is disabled.
Perform YPAO or set “Subwoofer” in the “Setup” menu to “Use”. For details, see
the following:
– “Optimizing the speaker settings automatically (YPAO)” (p.33)
– “Setting the use of a subwoofer” (p.83)
l The volume of the subwoofer is too low.
Adjust the volume on the subwoofer.
l The subwoofer has been turned off by its auto-standby function.
Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
En
115
n
No sound from the playback device connected to the
unit with HDMI
l The TV does not support HDCP (High-bandwidth Digital Content Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
l The number of devices connected to the HDMI OUT jack exceeds the limit.
Disconnect some of the HDMI devices.
n
No sound from the TV when HDMI Control is used
l The TV is set to output audio from the TV speakers.
Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.
l A TV that does not support ARC is connected to the unit only with an HDMI
cable.
Use a digital optical cable to make an audio connection. For details, see the
following:
– “HDMI connection with a TV” (p.25)
l If the TV is connected to the unit with an audio cable, the TV audio input
setting does not match the actual connection.
Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack.
For details, see the following:
– “Setting the audio jack used for TV audio input” (p.90)
l If you are trying to use ARC, ARC is disabled on the unit or TV.
Set “ARC” in the “Setup” menu to “On”, and enable ARC on the TV. For details,
see the following:
– “Setting the use of ARC” (p.90)
n
Only the front speakers work on multichannel audio
l The playback device is set to output 2-channel audio (such as PCM) only.
To check it, use “Signal Information” in the “Option” menu. If necessary, change
the digital audio output setting on the playback device. For details, see the
following:
– “Checking information about the video/audio signals” (p.74)
n
Noise/hum is heard
l The unit is too close to another digital or radio frequency device.
Move the unit further away from the device.
l The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
n
The sound is distorted
l The volume of the unit is too high.
Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to
“Off”. For details, see the following:
– “Setting the use of the eco mode” (p.96)
l A device (such as an external power amplifier) connected to the unit’s audio
output jacks is not turned on.
Turn on all devices connected to the unit’s audio output jacks.
En
116
Video trouble
n
No video
l Another input source is selected on the unit.
Select an appropriate input source with the input selection keys.
l Another input source is selected on the TV.
Switch the TV input to display the video from the unit.
l The video signal output from the unit is not supported by the TV.
Check the video output setting of the playback device. For information about video
signals supported by the TV, refer to the instruction manuals for the TV.
l The cable connecting the unit and TV (or playback device) is defective.
If there is no problem with the connection, replace with another cable.
n
No video from the playback device connected to the
unit with HDMI
l The input video signal (resolution) is not supported by the unit.
To check the information about the current video signal (resolution) and video
signals supported by the unit, see the following:
– “Checking information about the video/audio signals” (p.74)
– “HDMI signal compatibility” (p.143)
l The TV does not support HDCP (High-bandwidth Digital Content Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
l The number of devices connected to the HDMI OUT jack is over the limit.
Disconnect some of the HDMI devices.
n
No image (contents required the HDCP 2.2/2.3 -
compatible HDMI device) from the playback device
l The TV (HDMI input jack) does not support HDCP 2.2/2.3.
Connect the unit to the TV (HDMI input jack) that supports HDCP 2.2/2.3. (The
Warning message can be displayed on the TV screen.)
n
The menu of the unit is not displayed on the TV
l The TV is not connected to the unit via HDMI.
You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them. For details, see
the following:
– “HDMI connection with a TV” (p.25)
l Another input source is selected on the TV.
Switch the TV input to display the video from the unit (HDMI OUT jack).
En
117
FM/AM radio trouble
n
FM radio reception is weak or noisy
l There is multi-path interference.
Adjust the FM antenna height or orientation, or place it in a different location.
l Your area is too far from the FM station transmitter.
To select monaural FM radio reception, set “FM Mode” in the “Option” menu to
“Monaural
”. Or use an outdoor FM antenna. For details on “
FM Mode”, see the
following:
– “Switching between stereo and monaural for FM radio reception” (p.75)
n
AM radio reception is weak or noisy
l The noises may be caused by fluorescent lamps, motors, thermostats, or other
electrical equipment.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
n
Radio stations cannot be selected automatically
l Your area is too far from the FM station transmitter.
Select the station manually. Or use an outdoor antenna. We recommend using a
sensitive multi-element antenna. For details on selecting the station manually, see
the following:
– “Selecting a frequency for reception” (p.51)
l The AM radio signal is weak.
Adjust the AM antenna orientation. Select the station manually. Use an outdoor AM
antenna. For details on selecting the station manually, see the following:
– “Selecting a frequency for reception” (p.51)
n
AM radio stations cannot be registered as presets
l Auto Preset has been used.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually. For details, see the following:
– “Registering a radio station manually” (p.53)
USB trouble
n
The unit does not detect the USB device
l The USB device is not connected to the USB jack securely.
Turn off the unit, reconnect your USB device, and turn the unit on again.
l The file system of the USB device is not FAT16 or FAT32.
Use a USB device with FAT16 or FAT32 format.
n
Folders and files in the USB device cannot be viewed
l The data in the USB device is protected by the encryption.
Use a USB device without an encryption function.
n
The unit does not perform continuous playback on files
of USB device
l When the unit detects a series of unsupported files during playback, playback
stops automatically.
Do not save unsupported files (such as images and hidden files) in folders for
playback.
En
118
Network trouble
n
The network feature does not function
l The network parameters (IP address) have not been obtained properly.
Enable the DHCP server function on your router and set “DHCP” in the “Setup”
menu to “On” on the unit. If you want to configure the network parameters
manually, check that you are using an IP address which is not used by other
network devices in your network. For details, see the following:
– “Setting the network parameters automatically (DHCP)” (p.100)
– “Setting the network parameters manually” (p.101)
l The unit does not support IPv6 network.
Connect IPv4 network.
n
The unit cannot connect to the Internet via a wireless
router (access point)
l The wireless router (access point) is turned off.
Turn on the wireless router.
l The unit and the wireless router (access point) are too far apart.
Place the unit and the wireless router (access point) closer to each other.
l There is an obstacle between the unit and the wireless router (access point).
Move the unit and the wireless router (access point) in a location where there are
no obstacles between them.
l The wireless router (access point) is set to use the wireless channel 14.
Change settings of the wireless router (access point) to use one of the wireless
channels from 1 to 13.
n
Wireless network is not found
l Microwave ovens or other wireless devices in your neighborhood might
disturb the wireless communication.
Turn off these devices.
l Access to the network is restricted by the firewall settings of the wireless
router (access point).
Check the firewall setting of the wireless router (access point).
n
The unit does not detect the media server (PC/NAS)
l The media sharing setting is not correct.
Configure the sharing setting and select the unit as a device to which music
contents are shared. For details, see the following:
– “Media sharing setup on media servers (PCs/NAS)” (p.60)
l Some security software installed on your media server is blocking the access
of the unit to your media server.
Check the settings of security software installed on your media server.
l The unit and media server are not in the same network.
Check the network connections and your router settings, and then connect the unit
and the media server to the same network.
l The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your media server to allow it to access to the unit. For
details, see the following:
– “Setting the MAC address filter” (p.101)
n
The files in the media server (PC/NAS) cannot be
viewed or played back
l The files are not supported by the unit or the media server.
Use the file format supported by both the unit and the media server. For
information about the file formats supported by the unit, see the following:
– “Supported file formats” (p.139)
En
119
n
The Internet radio cannot be played
l The selected Internet radio station is currently not available.
There may be a network problem at the radio station, or the service may have
been stopped. Try the station later or select another station.
l The selected Internet radio station is currently broadcasting silence.
Some Internet radio stations broadcast silence at certain of times of the day. Try
the station later or select another station.
l Access to the network is restricted by the firewall settings of your network
devices (such as the router).
Check the firewall settings of your network devices. The Internet radio can be
played only when it passes through the port designated by each radio station. The
port number varies depending on the radio station.
n
The iPhone does not recognize the unit when using
AirPlay
l The unit is connected to a multiple SSID router.
Access to the unit might be restricted by the network separation function on the
router. Connect the iPhone to the SSID which can access the unit. (Connect it to
the Primary SSID at the top of the list.)
n
The application for mobile devices does not detect the
unit
l The unit and mobile device are not in the same network.
Check the network connections and your router settings, and then connect the unit
and mobile device to the same network.
l The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your mobile device to allow it to access to the unit. For
details, see the following:
– “Setting the MAC address filter” (p.101)
l The unit is connected to a multiple SSID router.
Access to the unit might be restricted by the network separation function on the
router. Connect the iPhone to the SSID which can access the unit. (Connect it to
the Primary SSID at the top of the list.)
n
Firmware update via the network is failed
l It may not be possible depending on the condition of the network.
Update the firmware via the network again or use a USB memory device. For
details, see the following:
– “Updating the firmware via the network” (p.103)
En
120
Bluetooth® trouble
n
A Bluetooth® connection cannot be established
l The Bluetooth function of the unit is disabled.
Enable the Bluetooth function. For details, see the following:
– “Setting the use of Bluetooth
®
” (p.
104
)
l Another Bluetooth device is already connected to the unit.
Terminate the current Bluetooth connection and then establish a new connection.
For details, see the following:
– “Playback Bluetooth
®
device music on the unit” (p.56)
l The unit and the Bluetooth device are too far apart.
Move the Bluetooth device closer to the unit.
l There is a device (such as microwave oven and wireless LAN) that outputs
signals in the 2.4 GHz frequency band nearby.
Move the unit and the Bluetooth device away from those devices.
l The Bluetooth device does not support A2DP.
Use a Bluetooth device that supports A2DP.
l The connection information registered on the Bluetooth device is not working
for some reason.
Delete the connection information on the Bluetooth device, and then establish a
connection between the Bluetooth device and the unit again. For details, see the
following:
– “Playback Bluetooth
®
device music on the unit” (p.
56)
n
No sound is produced, or the sound is interrupted
during playback with Bluetooth® connection
l The volume of the Bluetooth device is set too low.
Turn up the volume of the Bluetooth device.
l The Bluetooth device is not set to send audio signals to the unit.
Switch the audio output of the Bluetooth device to the unit.
l The Bluetooth connection has been terminated.
Establish a Bluetooth connection between the Bluetooth device and the unit again.
For details, see the following:
– “Playback Bluetooth
®
device music on the unit”
(p.56)
l The unit and the Bluetooth device are too far apart.
Move the Bluetooth device closer to the unit.
l There is a device (such as microwave oven and wireless LAN) that outputs
signals in the 2.4 GHz frequency band nearby.
Move the unit and the Bluetooth device away from those devices.
En
121
Error indications on the front display
Error indications on the front display
Refer to the following table when the error message is indicated on the front display.
Message Cause Remedy
Access denied
Access to the media servers (PCs/NAS) is denied.
Configure the sharing settings and select the unit as a device to which music contents are shared. For
details, see the following:
• “Media sharing setup on media servers (PCs/NAS)” (p.60)
Access error
The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
There is a problem with the signal path from the network to the unit.
Make sure your router and modem are turned on, and check the connection between the unit and your
router (or hub). For details, see the following:
• “Connecting a network cable (wired connection)” (p.29)
• “Preparing wireless antennas (wireless connection)” (p.30)
Check SP Wires
The speaker cables are short circuited.
Twist the bare wires of the cables firmly and connect to the unit and speakers properly. For details, see
the following:
• “Connecting the speaker” (p.17)
Internal Error
An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center.
No content
There are no playable files in the selected folder. Select a folder that contains files supported by the unit.
No device
The unit cannot detect the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
Not connected
The network cable is not connected. Connect the network cable properly.
The wireless router (access point) is not found. Make sure the wireless router (access point) is turned on.
Please wait
The unit is preparing for connecting to the network.
Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn
it on again.
RemID Mismatch
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control. For details, see the following:
• “Selecting the remote control ID (REMOTE ID)” (p.108)
Unable to play
The unit cannot play back the songs stored on the iPhone for some
reason.
Check the song data. If it cannot be played on the iPhone itself, the song data or storage area may be
defective.
The unit cannot play back the songs stored on the media servers
(PCs/NAS) for some reason.
Ensure that the files are types that the unit is able to play back. If the unit supports the file format, but
still cannot play back any files, the network may be overloaded with heavy traffic. For information about
the formats supported by the unit, see the following:
• “Supported file formats” (p.139)
USB Overloaded
An overcurrent is flowing through the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
Version error
Firmware update failed.
Update the firmware again. For details, see the following:
• “Updating the firmware (UPDATE)” (p.111)
• “Updating the unit’s firmware via the network” (p.125)
En
122
Message Cause Remedy
Update failed.
Firmware update failed.
Press STRAIGHT and select a firmware updating method, then press INFO to update the firmware
again. For details, see the following:
• “Updating the firmware (UPDATE)” (p.111)
• “Updating the unit’s firmware via the network” (p.125)
FILE NOT READY
Preparation for firmware update is not finish yet. Wait a while before updating the firmware again.
En
123
APPENDIX
Updating the unit’s firmware via the network
Firmware updates
New firmware that provides additional features or product improvements will be
released as needed. If the unit is connected to the Internet, new firmware is
downloaded via the network. When a firmware update is ready, the following message
appears after SETUP is pressed.
You can switch the language.
For details on the firmware update, see the following:
• “Updating the unit’s firmware via the network” (p.125)
NOTICE
▪ Do not operate the unit or disconnect the power cable or network cable during firmware update. If the
firmware update is interrupted, there is a possibility that the unit will malfunction. In this case, contact
your nearest authorized Yamaha dealer or service center to request repair.
NOTE
▪ The firmware update indicator on the front display lights up when a firmware update is ready. This
indicator might not light up when the network connection speed is too slow or a later firmware update is
available.
▪ Firmware update takes about 20 minutes or more.
▪ You might not get the message or the lighting up firmware update indicator on the front display depending
on the condition of the network connection. In this case, update the firmware using the USB memory
device. For details, see the following:
– “Updating the firmware (UPDATE)” (p.111)
▪ For details on firmware updates, visit the Yamaha website.
En
124
Updating the unit’s firmware via the network
Confirm the on-screen description displayed after SETUP is pressed, and start the
firmware update.
1
Read the on-screen description and press the down cursor key.
The next screen appears.
2
To start the firmware update, press ENTER.
The on-screen display turns off.
3
If “UPDATE SUCCESS PLEASE POWER OFF!” appears on the
front display, press z (power) on the front panel.
The firmware update is complete.
NOTE
▪ Firmware update takes about 20 minutes or more.
▪ You might not get the message or the lighting up firmware update indicator on the front display depending
on the condition of the network connection. In this case, update the firmware using the USB memory
device. For details on using the USB memory device, see the following:
– “Updating the firmware (UPDATE)” (p.111)
▪ For details on update, visit the Yamaha website.
▪ If you want to perform update when turning off the unit, press not ENTER but the down cursor key in step
2, and follow the on screen instructions. When you turn off the unit, a screen asking you to confirm the
firmware update is displayed, and press
ENTER to start the firmware update. After the firmware update is
complete, the unit will turn off automatically.
▪
To perform update when turning off the unit, refer to the following instructions and supplementary
explanations.
– The firmware update can be started by pressing INFO on the front panel.
– The unit turns off automatically without performing the firmware update if two minutes pass after the
screen to confirm the firmware update is displayed.
– To cancel the firmware update process, press RETURN, and the unit will turn off.
– The unit turns off without performing the firmware update if you turn off the unit with AV CONTROLLER
or MusicCast CONTROLLER.
En
125
Using wireless surround speakers (MusicCast Surround function)
Using wireless surround speakers (MusicCast
Surround function)
Using devices that support the MusicCast Surround function, you can enjoy a 5.1.2-
channel or 5.1-channel system with wireless surround speakers and subwoofer.
NOTE
▪ For details on the 5.1.2-channel or 5.1-channel system, see the following:
– “Using 5.1.2-channel system” (p.19)
▪ Refer to the instruction manual of the devices that support the MusicCast Surround function for details on
settings and operations.
n
Devices supporting MusicCast Surround
As of December 1, 2018
MusicCast 50 MusicCast 20 MusicCast SUB 100
Wireless Streaming Speaker Network Subwoofer
n
Sample speaker layout
The following is a 5.1.2-channel system using two MusicCast 20 speakers as the
surround speakers and one MusicCast SUB 100 as the subwoofer.
4
1
2
9
5
3
E R
NOTE
▪ In a 5.1.2-channel or 5.1-channel system, the surround speakers and subwoofer can be wireless. With
other systems, only the subwoofer can be wireless.
▪ With wireless surround speakers
– Sound will not be output from the speaker terminals (SURROUND) on the unit.
– Surround back speakers cannot be used.
▪ With a wireless subwoofer
– One subwoofer can be wireless.
– Sound will not be output from the pre-out jacks (SUBWOOFER 1 and 2) on the unit. Therefore, another
subwoofer cannot be used by connecting it with an audio cable.
▪ The following audio cannot be output from the wireless surround speakers and subwoofer.
– DSD audio
– DVD-Audio and Super Audio CD (SACD) from HDMI input
En
126
1
The unit and the devices supporting MusicCast Surround must be
registered with the same location on the MusicCast
CONTROLLER app.
2
Follow the app’s on-screen instructions to complete setup of the
MusicCast Surround function.
Tap the
settings icon.
Tap “MusicCast
Surround/Stereo”.
For detailed setup instructions, refer to the following.
https://download.yamaha.com/files/tcm:39-1212383
3
Adjust the speaker settings automatically (YPAO).
NOTE
For details on YPAO, see the following:
▪ “Optimizing the speaker settings automatically (YPAO)” (p.33)
4
Check the settings.
And then, you can enjoy content playback with the MusicCast
CONTROLLER app.
En
127
Connecting to a network wirelessly
Selecting a wireless network connection method
Select a wireless connection method according to your network environment.
NOTE
▪ You need to configure the network settings if your router does not support DHCP or if you want to
configure the network parameters manually. For details, see the following:
– “Setting the network parameters manually” (p.101)
▪ When the unit is added to a MusicCast network, the network settings can be configured at the same time.
If you use MusicCast, this method is recommended. For details, see the following:
– “Adding the unit to the MusicCast network” (p.37)
Mobile device
(such as iPhone)
Internet
Modem
Wireless router
The unit
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
3
Press SETUP.
4
Use the cursor keys to select “Network” and press ENTER.
5
Use the cursor keys to select “Network Connection” and press
ENTER.
6
Use the cursor keys to select “Wireless(Wi-Fi)” and press ENTER.
The following connection methods are available.
• “Setting up a wireless connection using the WPS button” (p.129)
• “Setting up a wireless connection using an iOS device” (p.129)
• “Setting up a wireless connection by selecting from the list of available access
points” (p.
130
)
• “Setting up a wireless connection manually” (p.131)
• “Setting up a wireless connection by using the WPS PIN code” (p.132)
En
128
Setting up a wireless connection using the WPS
button
You can easily set up a wireless connection with one push of the WPS button.
Setup menu
“Network” > “Network Connection” > “Wireless(Wi-Fi)”
1
Use the cursor keys to select “WPS Button” and press ENTER.
2
Read the on-screen description and push the WPS button on the
wireless router (access point).
When the connection process finishes, “Completed” appears on the front
display.
If “Not connected” appears, repeat from step 1 or try another connection
method.
This completes the network settings.
NOTE
▪ The unit may not connect to the wireless router (access point) using WEP as the encryption method. In
this case, try another connection method.
▪ You can use INFO (WPS) on the front panel. Hold down INFO (WPS) for a few seconds to set up a
wireless connection and then “Press WPS button on Access Point
” appears on the front display, push the
WPS button.
About WPS
▪
WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy
establishment of a wireless home network.
Setting up a wireless connection using an iOS device
You can set up a wireless connection by applying the connection settings on iOS
devices (iPhone/iPad/iPod touch).
Before proceeding, confirm that your iOS device is connected to a wireless router.
NOTE
▪ This process will restore the default settings for the following.
– Network settings
– Bluetooth settings
– Bluetooth, USB, media server and network content registered as shortcuts
– Internet radio stations registered to “Favorites”
– Account information for the network services
▪ You need iOS device with iOS 7 or later. (The following procedure is a setup example for iOS 10.)
▪ This configuration does not work if the security method of your wireless router (access point) is WEP. In
this case, use other connection method.
Setup menu
“Network” > “Network Connection” > “Wireless(Wi-Fi)”
1
Use the cursor keys to select “WAC(iOS)” and press ENTER.
2
Read the on-screen description and press ENTER.
NOTE
When you use wired network connection, a warning message is displayed on the screen.
Disconnect the network cable from the unit, and then press
ENTER.
3
On the iOS device, select the unit as the AirPlay speaker in the Wi-
Fi screen.
iOS 10 (example of English version)
The name of the unit
En
129
4
Select the network (access point) of which you want to share the
settings with the unit.
The network currently selected
Tap here to start setup
When the sharing process finishes, the unit is automatically connected to
the selected network (access point) and “Completed” appears on the
front display.
If “Not shared” or “Not connected
” appears, press ENTER to repeat from
step 1 or try another connection method.
5
Press SETUP.
This completes the network settings.
Setting up a wireless connection by selecting from
the list of available access points
You can set up a wireless connection by selecting an access point from the list of
wireless LAN routers (access points) found by the unit. You need to manually enter the
security key.
Setup menu
“Network” > “Network Connection” > “Wireless(Wi-Fi)”
1
Use the cursor keys to select “Access Point Scan” and press
ENTER.
After searching for access points, the list of available access points
appears on the TV.
2
Use the cursor keys to select the desired access point and press
ENTER.
The wireless connection setting screen appears on the TV.
Access Point X
3
Press ENTER.
The edit screen appears.
En
130
4
Use the cursor keys and ENTER to enter the security key.
5
When finished entering the key, use the cursor keys to select
“OK” and press ENTER.
The previous wireless connection setting screen appears on the TV.
6
Use the cursor keys to select “Connect” and press ENTER to start
the connection process.
When the connection process finishes, “Completed” appears on the TV
screen.
If “Not connected” appears, repeat from step 2 or try another connection
method.
7
Press SETUP.
This completes the network settings.
Setting up a wireless connection manually
You can set up a wireless connection by entering the required information manually.
You need to set up the SSID (network name), encryption method and security key for
your network.
Setup menu
“Network” > “Network Connection” > “Wireless(Wi-Fi)”
1
Use the cursor keys to select “Manual Setting” and press ENTER.
The manual setting screen appears.
2
Use the cursor keys to select “SSID” and press ENTER.
The edit screen appears.
3
Use the cursor keys and ENTER to enter the SSID of the access
point.
En
131
4
When finished entering the key, use the cursor keys to select
“OK” and press ENTER.
The previous manual setting screen appears on the TV.
5
Use the cursor keys to select “Security” and select the encryption
method.
Choices
None, WEP, WPA-PSK(AES), Mixed Mode
NOTE
If you select “None”, the connection may be insecure since the communication is not encrypted.
6
Use the cursor keys to select “Security Key” and press ENTER.
The edit screen appears.
NOTE
If you select “None” in step 5, this item is not available.
7
Use the cursor keys and ENTER to enter the security key.
8
When finished entering the key, use the cursor keys to select
“OK” and press ENTER.
The previous manual setting screen appears on the TV.
9
Use the cursor keys to select “Connect” and press ENTER to start
the connection process.
When the connection process finishes, “Completed” appears on the TV
screen.
If “Not connected” appears, check that all the information is entered
correctly, and repeat from step 2.
10
Press SETUP.
This completes the network settings.
Setting up a wireless connection by using the WPS
PIN code
You can set up a wireless connection by entering the unit’s PIN code into the wireless
router (access point). The method is available if the wireless router (access point)
supports the WPS PIN code method.
Setup menu
“Network” > “Network Connection” > “Wireless(Wi-Fi)”
1
Use the cursor keys to select “PIN Code” and press ENTER.
The list of available access points appears on the TV.
2
Use the cursor keys to select the desired access point and press
ENTER.
The PIN code of the unit appears on the TV screen.
3
Enter the unit’s PIN code into the wireless router (access point).
For details on settings, refer to the instruction manual of the wireless
router (access point).
4
Press ENTER to start the connection process.
When the connection process finishes, “Completed” appears on the TV
screen.
If “Not connected” appears, repeat from step 2 or try another connection
method.
5
Press SETUP.
This completes the network settings.
En
132
Input/output jacks and cables
Video/audio jacks
n
HDMI jacks
Transmit digital video and digital sound through a
single jack. Use an HDMI cable.
HDMI cable
NOTE
▪ Use a 19-pin HDMI cable with the HDMI logo. We recommend
using a cable as short as possible to prevent signal quality
degradation.
▪ The unit’s HDMI jacks support the HDMI Control, Audio Return
Channel (ARC), and 3D and 4K Ultra HD video transmission
(through output) features.
▪ Use a Premium High Speed HDMI Cable or Premium High Speed
Cable with Ethernet to enjoy 3D or 4K Ultra HD videos.
Video jacks
n
VIDEO jacks
Transmit analog video signals. Use a video pin cable.
Video pin cable
Audio jacks
n
OPTICAL jack
Transmit digital audio signals. Use a digital optical
cable. If there is a protective cap on the tip of the
cable, remove it before using the cable.
OPTICAL
Digital optical cable
n
COAXIAL jacks
Transmit digital audio signals. Use a digital coaxial
cable.
Digital coaxial cable
n
AUDIO jacks
Transmit analog stereo audio signals.
(Stereo L/R jacks)
Use a stereo pin cable (RCA cable).
Stereo pin cable
(Stereo mini jack)
Use a stereo mini-plug cable.
Stereo mini-plug cable
En
133
Using presence speakers
Presence speaker layout
The following three layout patterns are available for the presence speakers. Choose a
layout pattern that suits your listening environment.
• Front Height
• Overhead
• Dolby Enabled SP
NOTE
▪ You can enjoy Dolby Atmos, DTS:X or Cinema DSP 3D with any layout pattern.
▪ When using presence speakers, configure the “Layout” setting in the “Setup” menu before automatically
optimizing the speaker settings (YPAO). For details, see the following:
– “Setting the layout of the presence speakers” (p.86)
Installing the presence speakers in Front Height
position
Install the presence speakers on the front wall (Front Height).
It delivers a natural sound field with excellent linkage of left, right, top and bottom
sound spaces, and sound extensity effectively.
Installing the presence speakers in Overhead
position
Install the presence speakers to the ceiling above the listening position (Overhead).
It delivers realistic overhead sound effects and sound field with excellent linkage of
front and rear sound spaces effectively.
CAUTION
▪ Be sure to use speakers that are made for ceiling use and take anti-drop measures. Ask a qualified
contractor or dealer personnel for installation works.
NOTE
When installing presence speakers to a ceiling, install them just above the listening position, or the ceiling
between the extensions of the front speakers and listening position.
En
134
Using Dolby Enabled speakers as the presence
speakers
Use Dolby Enabled speakers as the presence speakers.
This utilizes sound reflected from ceiling and lets you enjoy overhead sound only from
speakers that are placed at the same level as traditional speakers.
NOTE
▪ Place the Dolby Enabled speakers on top of or near the traditional front speakers.
▪ A Dolby Enabled speaker unit may be integrated into a traditional speaker. For details, refer to the
instruction manual of the Dolby Enabled speakers.
En
135
Glossary
Glossary of audio information
n
Glossary of audio decoding format
This is a glossary of the technical terms related to audio decoding format used in this
manual.
Dolby Atmos
Introduced first in the cinema, Dolby Atmos brings a revolutionary sense of dimension and
immersion to the Home Theater experience. Dolby Atmos is an adaptable and scalable object
based format that reproduces audio as independent sounds (or objects) that can be accurately
positioned and move dynamically throughout the 3 dimensional listening space during playback.
A key ingredient of Dolby Atmos is the introduction of a height plane of sound above the listener.
Dolby Atmos Stream
Dolby Atmos content will be delivered to your Dolby Atmos enabled AV receiver via Dolby Digital
Plus or Dolby TrueHD on Blu-ray Disc, downloadable files and streaming media. A Dolby Atmos
stream contains special metadata that describes the positioning of sounds within the room. This
object audio data is decoded by a Dolby Atmos AV receiver and scaled for optimum playback
through Home Theater speaker systems of every size and configuration.
Dolby Digital
Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that
supports 5.1-channel audio. This technology is used for audio on most DVD disc.
Dolby Digital Plus
Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that
supports 7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing
multichannel audio systems that support Dolby Digital. This technology is used for audio
streaming services on the Internet and audio on BD (Blu-ray Disc).
Dolby Surround
Dolby surround is a next generation surround technology that intelligently up mixes stereo; 5.1
and 7.1 content for playback through your surround speaker system. Dolby surround is
compatible with traditional speaker layouts, as well as Dolby Atmos enabled playback systems
that employ in-ceiling speakers or products with Dolby speaker technology.
Dolby TrueHD
Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to
offer a high-definition home theater experience with the quality of the studio master. Dolby TrueHD
can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio)
simultaneously. This technology is used for audio on BD (Blu-ray Disc).
DTS 96/24
DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit
audio. This format remains fully compatible with the existing multichannel audio systems that
support DTS Digital Surround. This technology is used for music DVDs, etc.
DTS Dialog Control
DTS Dialog Control allows you to boost the dialog. This can be useful in noisy environments to
help make the dialog more intelligible. People with impaired hearing may also benefit. Note that
the content creator may disable the use of this feature in the mix, so that DTS Dialog Control may
not always be available. Note that updates to your AVR may add more functionality to DTS Dialog
Control or increase the range of the feature.
DTS Digital Surround
DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
DTS-ES
DTS-ES creates total 6.1-channel audio from 5.1-channel sources that are recorded with DTS-ES.
This decoder adds a surround back sound to the original 5.1-channel sound. In the DTS-ES Matrix
6.1 format, a surround back sound is recorded in the surround channels, and in the DTS-ES
Discrete 6.1 format, a discrete surround back channel is recorded.
DTS Express
DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a
higher compression rate than the DTS Digital Surround format developed by DTS, Inc. This
technology is developed for audio streaming services on the Internet and secondary audio on BD
(Blu-ray Disc).
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that
supports 7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully
compatible with the existing multichannel audio systems that support DTS Digital Surround. This
technology is used for audio on most BD (Blu-ray Disc).
DTS-HD Master Audio
DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition
home theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio
can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio)
simultaneously. This technology is used for audio on BD (Blu-ray Disc).
DTS Neo: 6
DTS Neo: 6 enables 6-channel playback from 2-channel sources. There are two modes available:
“Music mode” for music sources and “Cinema mode” for movie sources. This technology provides
discrete full-bandwidth matrix channels of surround sound.
DTS:X
DTS:X is the next generation object-based, multi-dimensional audio technology from DTS.
Unbound from channels, DTS:X conveys the fluid movement of sound to create an incredibly rich,
realistic and immersive soundscape - in front of, behind, beside and above the audience - more
accurately than ever before. DTS:X offers the ability to automatically adapt the audio to the
speaker layout that best fits the space, from a television’s built-in speakers to a home surround
theater system to a dozen or more speakers in a commercial cinema. Immerse yourself at
www.dts.com/dtsx
En
136
DSD (Direct Stream Digital)
DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as
SACD (Super Audio CDs). The signals are stored at a high-frequency sampling rate (such as 11.2
MHz). The highest frequency response is equal to or higher than 100 kHz, with a dynamic range
of 120 dB. This technology offers better audio quality than that used for CDs.
FLAC
FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed
audio formats in compression rate but provides higher audio quality.
MP3
One of the compressed digital audio format used by MPEG. With psychoacoustic technologies,
this compression method achieves a high compression rate. Reportedly, it is capable of
compressing data quantity by about 1/10 maintaining a certain level of audio quality.
MPEG-4 AAC
An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio
streaming services on Internet because it allows a high compression rate of data while
maintaining better audio quality than MP3.
Neural:X
Neural:X is the latest downmixing/upmixing and spatial remapping technology from DTS. It is built
in to DTS:X to provide upmix of Neural:X-encoded and non-encoded (PCM) data. In DTS:X for
AVRs and Sound Bars, Neural:X can produce up to 11.x channels.
PCM (Pulse Code Modulation)
PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted.
This technology is the basis of all other audio format. This technology is used as a lossless audio
format called Linear PCM for audio on a variety of media, including CDs.
Sampling frequency/Quantization bit
Sampling frequency and quantization bits indicate the quantity of information when an analog
audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”.
• Sampling frequency
Sampling frequency (the number of times the signal is sampled per second) is called the
sampling rate. When the sampling frequency is higher, the range of frequencies that can be
played back are wider.
• Quantization bit
The number of quantization bits indicate the degree of accuracy when converting the sound
level into a numeric value. When the number of quantized bits is higher, the expression of the
sound level is more accurate.
WAV
Windows standard audio file format, which defines the method of recording the digital data
obtained by converting audio signals. By default, the PCM method (no compression) is used, but
you can also use other compression methods.
WMA (Windows Media Audio)
One of the compressed digital audio formats developed by Microsoft Corporation. With
psychoacoustic technologies, this compression method achieves a high compression rate.
Reportedly, it is capable of compressing data quantity by about 1/20 maintaining a certain level of
audio quality.
n
Glossary of audio information other than audio
decoding format
This is a glossary of the technical terms related to audio information used in this
manual.
Bi-amplification connection (Bi-amp)
A bi-amplification connection uses two amplifiers for a speaker. When you use the bi-amplification
connection, the unit drives the tweeter and woofer in a speaker with the discrete amplifiers. As a
consequence, the tweeter and woofer provide clear audio signal without the interference.
LFE (Low Frequency Effects) 0.1 channel
This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to
120 Hz. This channel is added to the channels for all bands with Dolby Digital or DTS to enhance
low frequency audio effects. This channel is labeled 0.1 because it is limited to only low frequency
audio.
Lip sync
Video output sometimes lags behind audio output due to the complexity of signal processing
caused by an increase in video signal capacity. Lip sync is a technique for automatically
correcting the timing lag between audio and video output.
Glossary of HDMI and video information
This is a glossary of the technical terms related to HDMI and video information used in
this manual.
Composite video signal
With the composite video signal system, color, brightness, and synchronization data signals are
combined and transmitted with a single cable.
Deep Color
Deep Color is a technology that HDMI specification supports. Deep Color increases the number of
available colors within the boundaries defined by the RGB or YCbCr color space. Conventional
color systems process the color using 8 bits. Deep Color processes the color with 10, 12, or 16
bits. This technology allows HDTVs and other displays to increase from millions of colors to
billions of colors and eliminate on-screen color banding for smooth tonal transitions and subtle
gradations between colors.
HDMI
HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/
video signal transmission. This interface transmits both digital audio and digital video signals
using a single cable without any loss. HDMI complies with HDCP (High-bandwidth Digital Content
Protection) and provides a secure audio/video interface. For further information on HDMI, visit the
HDMI website at “http://www.hdmi.org/”.
x.v.Color
“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color
space than sRGB and allows the expression of colors that were not hitherto possible. While
remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color
space, and thus can produce more vivid, natural images.
En
137
Glossary of network information
This is a glossary of the technical terms related to network information used in this
manual.
SSID
SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.
Wi-Fi
Wi-Fi (Wireless Fidelity) is a technology that allows an electronic device to exchange data or
connect to the Internet wirelessly using radio waves. Wi-Fi offers the advantage of eliminating the
complexity of making connections with LAN cables by using wireless connection. Only products
that complete Wi-Fi Alliance interoperability tests can carry the “Wi-Fi Certified” trademark.
WPS
WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy
establishment of a wireless home network.
Glossary of Yamaha technologies
This is a glossary of the technical terms related to Yamaha technologies used in this
manual.
CINEMA DSP (Digital Sound Field Processor)
Since the surround sound systems were originally designed for use in movie theaters, their effect
is best experienced in a theater that has many speakers designed for acoustic effects. Since
home conditions (such as room size, wall material, and number of speakers) can differ so widely,
it is inevitable that there are differences in the sound that you hear. Based on a wealth of actually
measured data, CINEMA DSP, Yamaha’s original DSP technology provides the audiovisual
experience of a movie theater in your own home.
CINEMA DSP 3D
The actually measured sound field data contain the information of the height of the sound images.
CINEMA DSP 3D mode achieves the reproduction of the accurate height of the sound images so
that it creates the accurate and intensive 3D sound fields in a listening room.
Compressed Music Enhancer
The Compressed Music Enhancer feature compensates for missing harmonics in compression
music formats (such as MP3). As a result, this technology provides improved performance for the
overall sound system.
SILENT CINEMA
Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones.
Parameters for headphones have been set for each sound program, so that accurate
representations of all the sound programs can be enjoyed on headphones.
Virtual CINEMA DSP
Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround
speakers with front left and right speakers. Even if the surround speakers are not connected, the
unit creates the realistic sound field in a listening room.
Virtual Presence Speaker (VPS)
Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field
without presence speakers. Even if the presence speakers are not connected, the unit creates the
3D sound field in your room.
Virtual Surround Back Speaker (VSBS)
Virtual Surround Back Speaker allows the system to virtually reproduce the sound field of the
surround back speakers with surround speaker. Even if the surround back speakers are not
connected, the unit adds a sense of depth to the rear sound filed of CINEMA DSP.
YPAO (Yamaha Parametric room Acoustic Optimizer)
The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections,
measures the distances from them to your listening position(s), and then automatically optimizes
the speaker settings, such as volume balance and acoustic parameters, to suit your room.
En
138
Supported devices and file formats
Supported Bluetooth® devices
The following Bluetooth devices can be used by the unit.
• Bluetooth devices that support A2DP can be used.
• Operation of all Bluetooth devices cannot be guaranteed.
Supported USB devices
The following USB devices can be used by the unit.
• This unit is compatible with USB memory devices that are in FAT16 or FAT32 format.
Do not connect any other type of USB devices.
• USB devices with encryption cannot be used.
• Operation of all USB devices cannot be guaranteed.
Supported AirPlay devices
This AV Receiver is compatible with AirPlay 2. iOS 11.4 or later is required.
Supported file formats
The following file formats can be used by the unit.
File
Sampling
frequency
(kHz)
Quantization
bit (bit)
Bitrate (kbps)
Number of
channels
Support for
gapless
playback
WAV *
32/44.1/48/
88.2/96/
176.4/192
16/24/32 - 2
4
MP3
32/44.1/48 - 8 to 320 2 -
WMA
32/44.1/48 - 8 to 320 2 -
MPEG-4 AAC
32/44.1/48 - 8 to 320 2 -
FLAC
32/44.1/48/
88.2/96/
176.4/192
16/24 - 2
4
ALAC
32/44.1/48/
88.2/96
16/24 - 2
4
AIFF
32/44.1/48/
88.2/96/
176.4/192
16/24/32 - 2
4
DSD
2.8 MHz/
5.6 MHz/
11.2 MHz
1 - 2 -
* Linear PCM format only. 32 bit-float files cannot be played back.
• The playable file formats differ depending on the software installed on media
servers (PCs/NAS). Refer to the instruction manual of the server software for details.
• Digital Rights Management (DRM) contents cannot be played back.
En
139
Video signal flow
Video signal flow
Video signals input from a video device to the unit are output to a TV as follows.
HDMIHDMI
VIDEOVIDEO
HDMI HDMI
VIDEO MONITOR OUT
Video device The unit TV
HDMI connection
Composite video connection
HDMI in HDMI out
VIDEO in VIDEO out
En
140
Additional information on HDMI
HDMI Control and synchronized operations
HDMI Control allows you to operate external devices via HDMI. If you connect a TV
that supports HDMI Control to the unit with an HDMI cable, you can control the unit
(such as power and volume) with TV remote control operations. You can also control
external devices (such as HDMI Control-compatible BD/DVD players) connected to
the unit with an HDMI cable.
Operations available from the TV’s remote control
• Standby
• Volume control including mute
• Switching to input audio from the TV when the TV input is switched to its built-in
tuner
• Switching to input video/audio from the selected playback device
• Switching between audio output devices (the unit or TV speaker)
(Example)
HDMI Control HDMI Control
The unit turns off
(standby)
Playback device
also turns off
Turn off the TV
Operations available from the unit’s remote control
• Starting playback on the playback device and turning on the TV with a scene
selection
• Switching the TV input to display the “Setup” menu (when SETUP is pressed)
• Controlling the external device from which video is displayed on the TV (playback
and menu operations)
• Controlling the TV when you select TV audio input that is set in “TV Audio Input” in
the “Setup” menu
• Controlling the TV with the color (RED/GREEN/YELLOW/BLUE) keys of the remote
control when “
TV Control” is set for the color keys
(Example)
HDMI Control HDMI Control
Press SCENE (BD/DVD)
Playback starts
Turns on and displays video
from the playback device
NOTE
▪ HDMI Control might not work properly.
▪ For details on the scene selection, see the following:
– “Selecting a registered scene” (p.64)
▪ For details on TV audio input, see the following:
– “Setting the audio jack used for TV audio input” (p.90)
▪ For details on the functions for the RED/GREEN/YELLOW/BLUE keys, see the following:
– “Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control” (p.99)
To use HDMI Control, you need to perform the following HDMI Control link setup after
connecting the TV and playback devices.
For details on settings and operating your TV, refer to the instruction manual for the TV.
NOTE
This setup is required every time you add a new HDMI Control-compatible device to your system.
1
Turn on the unit, TV, and playback devices.
2
Enable the HDMI Control function on the unit, TV and HDMI
Control-compatible playback devices (such as BD/DVD players).
In order to enable the HDMI Control function on the unit, set “HDMI
Control
” in the “Setup” menu to “On”, and then configure the settings in
related items (“
TV Audio Input”, “Standby Sync”, “ARC” and “SCENE”).
For details, see the following:
▪ “Setting the use of HDMI Control” (p.89)
3
Turn off the main power of the TV and then turn off the unit and
playback devices.
En
141
4
Turn on the unit and playback devices and then turn on the TV.
5
Switch the TV input to display the video from the unit.
6
Check that the input, to which the playback device is connected
on the unit, is selected.
If not, select the input source manually.
7
Check that the video from the playback device is displayed on the
TV.
8
Check that the unit is properly synchronized with the TV by
turning off the TV or adjusting the TV volume with the TV remote
control.
NOTE
▪ If HDMI Control does not work properly, the problem may be solved by turning the playback device off and
on again, or by unplugging the power plug and plugging it in again. Also, HDMI Control may not work
properly if the number of connected devices exceeds the limit. In this case, disable HDMI Control on
devices not in use.
▪ If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting
on the TV.
▪ We recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
Audio Return Channel (ARC)
ARC allows you to input TV audio to the unit with the HDMI cable which transmits video
signal to the TV.
Check the following after the HDMI Control settings.
NOTE
For details on the HDMI Control settings, see the following:
▪ “HDMI Control and synchronized operations” (p.141)
1
Select a TV program with the TV remote control.
2
Check that the input source of the unit will be automatically
switched to “AUDIO1” and the TV audio will be played back on the
unit.
If you cannot hear the TV audio, check the following:
• “ARC” in the “Setup” menu is set to “On”. For details, see the following:
– “Setting the use of ARC” (p.90)
• The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack marked
“ARC”) on the TV.
Some HDMI jack on the TV is not compatible with ARC. For details, refer to the
instruction manual for the TV.
NOTE
▪ If the audio is interrupted while using ARC, set “ARC” in the “Setup” menu to “Off” and use a digital optical
cable to input TV audio to the unit. For details, see the following:
– “Setting the use of ARC” (p.90)
– “OPTICAL jack” (p.133)
▪ When using ARC, connect a TV with an HDMI cable that supports ARC.
▪ “AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO
1 jacks, use “
TV Audio Input” in the “Setup” menu to change the TV audio input assignment. To use the
SCENE function, you also need to change the input assignment for SCENE (TV). For details, see the
following:
–
“Setting the audio jack used for TV audio input” (p.90)
– “Registering a scene” (p.65)
En
142
HDMI signal compatibility
Confirm the following HDMI signal used by the unit.
• When CPPM copy-protected DVD-Audio is played back, video/audio signals may
not be output, depending on the type of the DVD player.
• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For
details, refer to the instruction manual for each device.
• To decode audio bitstream signals on the unit, set the playback device
appropriately so that the device outputs the bitstream audio signals directly (does
not decode the bitstream signals on the playback device). For details, refer to the
instruction manual for the playback device.
• If the playback device can decode the bitstream audio signals of audio
commentaries, you can play back the audio sources with the audio commentaries
mixed down by using digital audio input (OPTICAL or COAXIAL jacks). For details,
refer to the instruction manual for the playback device. The unit is not compatible
with audio commentaries for BD, such as audio content downloaded from the
internet.
En
143
Trademarks
Trademarks
The trademarks used in this manual are as follows.
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Atmos, Dolby Surround, Dolby Vision, and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS, Inc. DTS, the Symbol, DTS in combination with
the Symbol, DTS:X, and the DTS:X logo are registered trademarks
or trademarks of DTS, Inc. in the United States and/or other
countries. © DTS, Inc. All Rights Reserved.
This AV Receiver is compatible with AirPlay 2. iOS 11.4 or later is
required.
Use of the Works with Apple badge means that an accessory has
been designed to work specifically with the technology identified in
the badge and has been certified by the developer to meet Apple
performance standards.
Apple, AirPlay, Apple TV, Apple Watch, iPad, iPad Air, iPad Pro,
iPhone, Lightning, and iTunes are trademarks of Apple Inc.,
registered in the U.S. and other countries.
App Store
SM
App Store is a service mark of Apple Inc.
The terms HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
x.v.Color™
“x.v.Color” is a trademark of Sony Corporation.
Windows™
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
Internet Explorer, Windows Media Audio and Windows Media
Player are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Android™
Google Play™
Android and Google Play are trademarks of Google Inc.
The Wi-Fi CERTIFIED™ Logo and Wi-Fi Protected Setup are
certification marks of Wi-Fi Alliance
®
.
Wi-Fi, Wi-Fi CERTIFIED, Wi-Fi Protected Setup and WPA2 are
registered trademarks or trademarks of Wi-Fi Alliance
®
.
The Bluetooth
®
word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Yamaha Corporation is under license.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
MusicCast is a trademark or registered trademark of Yamaha
Corporation.
Yamaha Eco-Label is a mark that certifies products of high
environmental performance.
Google Noto Fonts
This product uses the following fonts.
Copyright © June 2015, Google
(https://www.google.com/get/noto/#sans-lgc), with Reserved Font
Name Noto Sans Version 1.004.
Copyright © June 2015, Google
(https://www.google.com/get/noto/help/cjk/), with Reserved Font
Name Noto Sans CJK Version 1.004.
This Font Software is licensed under the SIL Open Font License,
Version1.1.
This license is available with a FAQ at:
http://scripts.sil.org/OFL
Explanations regarding GPL
This product utilizes GPL/LGPL open-source software in some
sections. You have the right to obtain, duplicate, modify, and
redistribute this open-source code only. For information on GPL/
LGPL open source software, how to obtain it, and the GPL/LGPL
license, refer to the Yamaha Corporation website
(http://download.yamaha.com/sourcecodes/musiccast/)
.
Licenses
For information on the licenses of the third-party software in this
product, refer to the following.
http://(IP address of this product*)/licenses.html
* IP address of this product is checked with MusicCast
CONTROLLER.
En
144
Specifications
Specifications
The specifications of this unit are as follows.
Input jacks
Analog Audio
• Audio x 4 (including AUX)
Digital Audio (Supported frequencies: 32 kHz to 96 kHz)
• Optical x 1
• Coaxial x 2
Video
• Composite x 3
HDMI Input
• HDMI x 4
Other jacks
• USB x 1 (USB2.0)
• NETWORK (Wired) x 1 (100Base-TX/10Base-T)
Output jacks
Analog Audio
• Speaker Out x 7 (FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R*)
* Note: assignment is possible [SURROUND BACK, PRESENCE, BI-AMP (FRONT L/R), ZONE
B]
• Subwoofer Out x 2 (mono x 2)
• Headphone x 1
Video
• Composite x 1
HDMI Output
• HDMI OUT x 1
Other jacks
YPAO MIC x 1
HDMI
HDMI Features:
• 4K UltraHD Video (include 4K/60, 50Hz 10/12bit), 3D Video, ARC (Audio Return Channel), HDMI
Control (CEC), Auto Lip Sync, Deep Color, “x.v.Color”, HD audio playback, Selectable HDMI
input in HDMI standby mode, 21:9 Aspect Ratio, BT.2020 Colorimetry, HDR Compatible
(HDR10, Dolby Vision, HLG)
Video Format (Repeater Mode)
• VGA
• 480i/60 Hz
• 576i/50 Hz
• 480p/60 Hz
• 576p/50 Hz
• 720p/60 Hz, 50 Hz
• 1080i/60 Hz, 50 Hz
• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
• 4K/60Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz
Audio Format
• Dolby Atmos
• Dolby TrueHD
• Dolby Digital Plus
• Dolby Digital
• DTS:X
• DTS-HD Master Audio
• DTS-HD High Resolution Audio
• DTS Express
• DTS
• DSD 2-ch to 6-ch (2.8 MHz)
• PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
Content Protection: HDCP 2.2/2.3 compatible
Link Function: CEC supported
TUNER
Analog Tuner
• [U.K., Europe, Russia and Middle East models]
FM/AM with Radio Data System x 1 (TUNER)
• [Other models]
FM/AM x 1 (TUNER)
En
145
USB
Capable of Mass Storage Class USB Memory
Current Supply Capacity: 1.0 A
Bluetooth
Sink Function
• Source Device to AVR (ex. Smartphone/Tablet)
• Supported profile
– A2DP, AVRCP
• Supported codec
– SBC, AAC
Source Function
• AVR to Sink Device (ex. Bluetooth Headphone)
• Supported profile
– A2DP, AVRCP
• Supported codec
– SBC
Capable of Play/Stop Operation from Sink Device
Bluetooth version
• Ver. 4.2
Wireless output
• Bluetooth Class 2
Maximum communication distance
• 10 m (33 ft) without interference
Network
PC Client Function
AirPlay supported
Internet Radio
Wi-Fi function
• Capable of WPS by PIN Method and Push-Button-Method
• Capable of sharing with iOS devices by wireless connection
• Available Security Method: WEP, WPA2-PSK (AES), Mixed Mode, None
• Wireless LAN Standards: IEEE 802.11 a/b/g/n/ac*
* 20 MHz channel bandwidth only
Compatible Decoding Formats
Decoding Format
• Dolby Atmos
• Dolby TrueHD, Dolby Digital Plus
• Dolby Digital
• DTS:X
• DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Express
• DTS, DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
Post Decoding Format
• Dolby Surround
• DTS Neo: 6 Music, DTS Neo: 6 Cinema
• Neural:X
Audio Section
Rated Output Power (2-channel driven)
• [U.S.A. and Canada models] (20 Hz to 20 kHz, 0.09% THD, 8 Ω)
• [Other models] (20 Hz to 20 kHz, 0.09% THD, 6 Ω)
– Front L/R 80 W+80 W
• [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω)
– Front L/R 95 W+95 W
– Center 95 W
– Surround L/R 95 W+95 W
– Surround Back L/R 95 W+95 W
Rated Output Power (1-channel driven)
• [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω)
• [Other models] (1 kHz, 0.9% THD, 6 Ω)
– Front L/R, Center, Surround L/R, Surround Back L/R 115 W/ch
Maximum Effective Output Power (1-channel driven)
• [U.S.A. and Canada models]
(1 kHz, 10% THD, 8 Ω)
– Front L/R, Center, Surround L/R, Surround Back L/R
140 W/ch
(1 kHz, 10% THD, 6 Ω)
– Front L/R, Center, Surround L/R, Surround Back L/R
145 W/ch
• [Other models] (1 kHz, 10% THD, 6 Ω)
– Front L/R, Center, Surround L/R, Surround Back L/R 135 W/ch
En
146
Dynamic Power (IHF)
• [U.S.A. and Canada models]
– Front L/R (8/6/4/2 Ω)
120/140/170/190 W
• [Other models]
– Front L/R (6/4/2 Ω)
140/170/190 W
Damping Factor
• Front L/R, 20 Hz to 20 kHz, 8 Ω
100 or more
Input Sensitivity / Input Impedance
• AV 2 etc. (1 kHz, 100 W/6 Ω) 200 mV/47 k
Maximum Input Signal
• AV 2 etc. (1 kHz, 0.5% THD, Effect On) 2.3 V
Output Level / Output Impedance
• SUBWOOFER
1 V/1.2 k
Headphone Jack Rated Output / Impedance
• AV 2 etc. (1 kHz, 50 mV, 8 Ω) 100 mV/470
Frequency Response
• AV 2 etc. to Front (10 Hz to 100 kHz) +0/-3 dB
Signal to Noise Ratio (IHF-A Network)
• AV 2 etc. (DIRECT) (Input 1 kΩ Shorted, Speaker Out)
110 dB or more
Residual Noise (IHF-A Network)
• Front L/R (Speaker Out) 150 μV or less
Channel Separation
• AV 2 etc. (Input 1 kΩ Shorted, 1 kHz/10 kHz)
70 dB/50 dB or more
Volume Control
• Range MUTE, -80 dB to +16.5 dB
• Step 0.5 dB
Tone Control Characteristics
• Bass Boost/Cut ±6 dB/0.5 dB Step at 50 Hz
• Bass Turnover 350 Hz
• Treble Boost/Cut ±6 dB/0.5 dB Step at 20 kHz
• Treble Turnover 3.5 kHz
Filter Characteristics
(fc=40/60/80/90/100/110/120/160/200 Hz)
• H.P.F. (Front, Center, Surround, Surround Back) 12 dB/oct.
• L.P.F. (Subwoofer) 24 dB/oct.
Video Section
Video Signal Type
• [U.S.A., Canada, Korea, Taiwan, Brazil and General models] NTSC
• [Other models] PAL
Video Signal Level
• Composite
1 Vp-p/75
Video Maximum Input Level
1.5 Vp-p or more
Video Signal to Noise Ratio
50 dB or more
FM Section
Tuning Range
• [U.S.A. and Canada models] 87.5 MHz to 107.9 MHz
• [Asia, Taiwan, Brazil, General, and Central
and South America models]
87.5/87.50 MHz to 108.0/108.00 MHz
• [U.K. and Europe models] 87.50 MHz to 108.00 MHz
• [Other models] 87.50 MHz to 108.00 MHz
50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
• Monaural 3 μV (20.8 dBf)
Signal to Noise Ratio (IHF)
• Monaural 65 dB
• Stereo 64 dB
En
147
Harmonic Distortion (IHF, 1 kHz)
• Monaural 0.5%
• Stereo 0.6%
Antenna Input
75 unbalanced
AM Section
Tuning Range
• [U.S.A. and Canada models] 530 kHz to 1710 kHz
• [Asia, Taiwan, Brazil, General, and Central and South
America models]
530/531 kHz to 1710/1611 kHz
• [U.K. and Europe models] 531 kHz to 1611 kHz
• [Other models] 531 kHz to 1611 kHz
General
Power Supply
• [U.S.A. and Canada models] AC 120 V, 60 Hz
• [Brazil and Central and South America
models]
AC110 to 120/220 to 240 V, 50/60 Hz
• [Taiwan model] AC110 to 120/220 to 240 V, 50/60 Hz
• [China model] AC 220 V, 50 Hz
• [Korea model] AC 220 V, 60 Hz
• [Australia model] AC 240 V, 50 Hz
• [UK, Europe, Russia and Middle East
models]
AC 230 V, 50 Hz
• [Asia and General models] AC 220 to 240 V, 50/60 Hz
Power Consumption
260 W
Standby Power Consumption
• HDMI Control Off, Standby Through Off 0.1 W
• HDMI Control On, Standby Through Auto (No Signals) 1.0 W
• HDMI Control On, Standby Through On (No Signals) 1.0 W
• HDMI Control Off, Standby Through Off, Network Standby On
– Wired 1.3 W
– Wireless (Wi-Fi) 1.4 W
• HDMI Control On, Standby Through On, Network Standby On
– Wired 2.1 W
– Wireless (Wi-Fi) 2.2 W
• HDMI Control Off, Standby Through Off, Bluetooth Standby On 1.4 W
• HDMI Control On, Standby Through On, Bluetooth Standby On 2.0 W
Maximum Power Consumption
• [Taiwan and General models] 600 W
Dimensions (W x H x D)
435 x 161 x 327 mm (17-1/8” x 6-3/8” x 12-7/8”)
Reference Dimensions (with wireless antenna upright)
* Including legs and protrusions
435 x 225.5 x 327 mm (17-1/8” x 8-7/8” x 12-7/8”)
Weight
8.1 kg (17.9 lbs)
* The contents of this manual apply to the latest specifications as of the publishing date. To obtain
the latest manual, access the Yamaha website then download the manual file.
En
148
Default settings
Default settings of the Option
menu
The default settings of the “Option” menu are as
follows.
Tone Control
Treble, Bass
Bypass (0.0 dB)
* When both “Treble” and “Bass” are
0.0 dB, “
Bypass” appears.
DSP/Surround
• DSP Level 0 dB
• Adaptive DRC Off
• Enhancer
– TUNER, (network sources), AirPlay,
SERVER
, NET RADIO,
Bluetooth, USB
On
– Others Off
Volume Trim
• Input Trim 0.0 dB
• Subwoofer Trim 0.0 dB
• ZoneB Trim 0.0 dB
Lipsync On
Video Out Off
FM Mode Stereo
Shuffle Off
Repeat Off
Volume Interlock Limited
Default settings of the Setup
menu
The default settings of the “Setup” menu are as follows.
Speaker
Configuration
• Power Amp Assign Presence
• Subwoofer Use
• Front Small
• Center Small
• Surround Small
• Surround Back None
• Presence Small
• Layout Front Height
• Crossover 80 Hz
• Subwoofer Phase Normal
• Extra Bass Off
• Virtual CINEMA FRONT Off
Distance 3.00 m (10.0 ft)
Level 0.0 dB
Equalizer Off
Test Tone Off
HDMI
HDMI Control Off
Audio Output Off
Standby Through Off
4K Upscaling Off
HDCP Version
• HDMI 1-4 Auto
TV Audio Input AUDIO1
Standby Sync Auto
ARC On
SCENE
• BD / DVD, TV On
• NET, RADIO Off
Sound
DSP Parameter
• Center Spread Off
• Center Image 0.3
• Monaural Mix Off
Lipsync
• Select Auto
(This setting is effective when a TV that
supports an automatic lipsync function is
connected to the unit via HDMI.)
• Adjustment 0 ms
Dialogue
• Dialogue Level 0
• DTS Dialogue Control 0
• Dialogue Lift 0
(This setting is available only when
one of the sound programs (except
for 2ch Stereo and 7ch Stereo) is
selected when presence speakers
are used, or Virtual Presence
Speaker (VPS) is working.)
En
149
Volume
• Scale dB
• Dynamic Range Maximum
• Max Volume +16.5 dB
• Initial Volume Off
• ZoneB Volume Sync.
ECO
Auto Power Standby
• U.K., Europe, Russia, Middle East and
Korea models
20 minutes
• Other models Off
ECO Mode Off
Function
Input Rename
• HDMI 1-4 Auto
• Others Manual
(For AUX, AUDIO3, TUNER, MusicCast
Link, SERVER, NET RADIO, USB
only
“Manual” can be selected.)
Input Skip Off
Dimmer 0
Memory Guard Off
Remote Color Key Default
Network
Information -
Network Connection Wired
IP Address
• DHCP On
MAC Address Filter Off
DMC Control Enable
Network Standby Auto
Network Name -
MusicCast Link Power Interlock Off
Network Update -
Bluetooth
Bluetooth On
Audio Receive
• Disconnect -
• Bluetooth Standby On
Audio Send
• Transmitter Off
• Device Search -
Language
English
Default settings of the
ADVANCED SETUP menu
The default settings of the “ADVANCED SETUP” menu
are as follows.
SP IMP.
(U.S.A. and Canada models only)
8 Ω MIN
REMOTE ID ID1
TU
(Asia, Taiwan, Brazil, General, and Central
and South America models only)
FM50/AM9
TV FORMAT
• U.S.A., Canada, Korea, Taiwan, Brazil
and Central and South America models
NTSC
• Other models PAL
4K MODE MODE 1
DTS MODE MODE 1
BKUP/RSTR BKUP
INIT CANCEL
UPDATE USB
VERSION -
En
150
Yamaha Global Site
https://www.yamaha.com/
Yamaha Downloads
http://download.yamaha.com/
Manual Development Group
© 2018 Yamaha Corporation
Published 07/2019 NV-D0
AV17-0136
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
Yamaha RX-V 585 El manual del propietario
- Categoría
- Receptores AV
- Tipo
- El manual del propietario
- Este manual también es adecuado para
en otros idiomas
- français: Yamaha RX-V 585 Le manuel du propriétaire
- italiano: Yamaha RX-V 585 Manuale del proprietario
- English: Yamaha RX-V 585 Owner's manual
- Deutsch: Yamaha RX-V 585 Bedienungsanleitung
- русский: Yamaha RX-V 585 Инструкция по применению
- Nederlands: Yamaha RX-V 585 de handleiding
- português: Yamaha RX-V 585 Manual do proprietário
- dansk: Yamaha RX-V 585 Brugervejledning
- svenska: Yamaha RX-V 585 Bruksanvisning
- Türkçe: Yamaha RX-V 585 El kitabı
- suomi: Yamaha RX-V 585 Omistajan opas