8
• Fasten either shaker lid (small holes or large holes) to either cup (small grinding or tall blending)
to use for cooking or serving.
• The large-hole shaker top may be used to serve: grated Parmesan cheese, chocolate, avored
sugars, or coarse spice blends. Use the small-hole shaker top for nely ground spices,
such as nutmeg or cinnamon stick.
Grinding Coffee
Preparing, using, and storing freshly-ground coffee is simple with the Rocket blending set.
1. Add coffee beans to the small grinding cup. If desired, add any other avoring ingredients,
such as cinnamon or vanilla bean.
2. Add the grinding blade.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user-serviceable parts. Any servicing requiring
disassembly other than cleaning must be performed by a qualied appliance repair technician.
Care & Cleaning Instructions
CAUTION: Never immerse the motor base, plug or cord in water or any other liquid.
1. Always unplug the Rocket Blender before cleaning.
2. Whenever possible, rinse parts immediately after processing to make cleanup easier.
3. Always handle blades using the blade collar.
CAUTION: Use extreme care when handling blades. Do not touch the blades with your ngers.
The blades are very sharp and can cause injury if touched.
4. If necessary, use any small nylon bristle brush to remove processed food from the blade
and the blade area.
5. For quick clean-ups, ll processing cup (blending or grinding) one-quarter full with clean, warm
water. Following the steps outlined in the Operating Instructions. Rinse thoroughly.
6. Remove cup rings after use to clean. Wash all lids and cup rings in warm soapy water.
Rinse and dry thoroughly.
CAUTION: Never use rough scouring pads or abrasive cleansers on any plastic or metal parts
as the surface may be damaged.
7. Processing blades, processing cups and lids are all top-rack dishwasher safe.
IMPORTANT: After dishwashing, always check to make sure the gasket seal in the base of the blade
collar is properly in place, as the heat from some dishwashers may cause them to become loose.
8. The motor base may be wiped with a damp cloth or sponge. Dry thoroughly.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.
Gasket Ring Replacement
• If the gasket ring breaks or visibly deteriorates, remove the old gasket ring from the base of either
the blending or grinding blade of your Rocket blender.
• Remove the replacement gasket ring from the bag and wash
it with warm soapy water, then pat it dry. Make sure the seal
ring is completely dry before replacing it.
• Make sure that the at surface of the replacement gasket
ring is facing downward; while the rounded side of the
replacement seal is facing upwards.
• WARNING: Be careful to not touch the blades. Press the seal
ring rmly into place, until it is properly installed into the
base of either the blending or grinding blade.
Storing Instructions
1. Unplug and clean unit.
2. Store in original box or in a clean, dry place.
3. Never store Rocket Blender while it is hot or plugged in.
4. Never wrap cord tightly around the appliance. Never place any stress on cord, especially where
the cord enters the unit, as this could cause the cord to fray and break.
Gasket ring
Flat side needs to face the bottom