Samsung HG40NC677DF Guía de inicio rápido

Marca: Samsung

Modelo: HG40NC677DF

Categoría: Televisores LCD

Tipo: Guía de inicio rápido

Este manual también es adecuado para

To register this product please visit

www.samsung.com/register.

Quick Setup Guide

List of Parts

Remote Control (AA59-00817A) &

Batteries (AAA x 2)

Power Cord

Owner’s Instructions

Safety Guide

Holder-Wire stand 1(EA)

Data Cable (BN39-00865B, BN3

9-01011C)

Hotel Mount Kit

Installing the LED TV Stand

♦ HG28NC670/HG28NC677/HG40NC670/HG40NC677/HG48NC670/HG48NC677

Components

When installing the stand, use the provided components and parts.

28”

1 EA

40” 48”

1 EA

x8 (M4 X L12, for 40”

and above models)

x7 (M4 X L12)

•

Stand (differs, depending on the model)

•

Guide Stand

•

Screws

•

Security Screws (3EA)

(4EA, for 40” and above models)

✎ P

lace a soft cloth over the table to

protect the TV, and then place the

TV on the cloth screen-side down.

✎ Insert the Stand Guide into the

slot on the bottom on the botton

of the TV.

Front

2 3

(M4 X L12)

TOP View

Side

(M4 X L12)

(M4 X L12, for 40”

and above models)

(only for 40"&48"model)

DO NOT USE

OIL

DO NOT USE

GREASE

DO NOT USE

CHEMICALS

✎ Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them.

✎ Make sure that at least two people lift and move the LED TV.

✎ When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws.

✎ The number of screws may differ depending on the model.

- The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV

is turned on.

If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on.

If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.

- Models supporting the ARC function are listed below:

• Sound-Bars: HW-E350/E450/E550

HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F75

♦ Setting the Sound-Bar to Hotel Mode.

- Set the following Hotel menu options:

• Hotel option > System > Sound Bar Out = On.

• Hotel option > Power On > Power On Volume = User Defined.

• Hotel option > Power On > Power On Volume Num > Set greater than 0.

• Hotel option > Power On > Max Volume > Set greater than 0.

- Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI3 port (supporting ARC) on the

hospitality TV.

- After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV,

and then automatically switches to Hotel Mode.

Sound Bar Hotel mode functional characteristics:

• Power On/Off is synchronized with the TV

• HDMI_CEC defaults to On

• Functions through the “HDMI OUT” port only

• Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes.

• Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On

Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s Hotel

options menu.

Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and Max

Volume=45.

Wall Mount Kit Speciﬁcations (VESA)

Install your wall mount on a solid wall perpendicular to the ﬂoor. If you are attaching the wall mount to building

materials other than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall

and cause severe personal injury.

➣ Standard dimensions for wall mount kits are shown in the table below.

➣ Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.

➣ Do not use screws that do not comply with the VESA standard screw speciﬁcations.

➣ Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw

speciﬁcations. Screws that are too long may cause damage to the inside of the TV set.

➣ For wall mounts that do not comply with the VESA standard screw speciﬁcations, the length of the screws may differ

depending on the wall mount speciﬁcations.

➣ Do not fasten the screws too ﬁrmly. This may damage the product or cause the product to fall, leading to personal

injury. Samsung is not liable for these kinds of accidents.

➣ Samsung is not liable for product damage or personal injury when a non-VESA or non-speciﬁed wall mount is used or

the consumer fails to follow the product installation instructions.

➣ Do not mount the TV at more than a 15 degree tilt.

➣ Always have two people mount the TV onto a wall.

Product Family

TV size in

inches

VESA screw hole

specs (A * B) in

millimeters

Standard Screw

(Length*

Pitch in mm)

Quantity

LED-TV

28 100 X 100

40 200 X 200

48 400 X 400

Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to

electric shock.

STOP

Please do not return

this unit

If you are having problems operating this TV,

Please call;

US : 1-866-894-0524

CANADA : 1-800-726-7864

For web support please visit

http://www.samsung.com/us/business

BN68-05850X-02

♦ Assembling the swivel

The 40” and larger LED TVs have swivel stands. You can set these stands so that the TV swivels 20 degrees left and right,

60 degrees left and right, or 90 degrees left and right.

20° swivel

To conﬁgure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket

Holder Swivel marked 20°. Then, ﬁx the Bracket Holder Swivel to the stand using the three supplied screws as shown to the left.

60° swivel

To conﬁgure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket

Holder Swivel marked 60°. Then, ﬁx the Bracket Holder Swivel to the stand using the three supplied screws as shown to the left.

90° swivel

To conﬁgure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and then screw the three supplied screws into

the stand as shown to the left.

♦ Hotel Mount Kit

Short Bolt (2EA) Long Bolt (2EA)

Nut (2EA) Washer (2EA)

Viewing the Connection Panel

- SIDE -

HDMI IN 1

HDMI IN 2

(DVI)

(5V 0.5A)

/CLONING

AV IN

AUDIO

VIDEIO

HDMI IN

3 (ARC)

EX-LINK

AUDIO OUT

ANT IN

AIR/CABLE

- SIDE -

HDMI IN 1

HDMI IN 2

(DVI)

(5V 0.5A)

/CLONING

AV IN

AUDIO

VIDEO

HDMI IN

3 (ARC)

EX-LINK

AUDIO OUT

ANT IN

AIR/CABLE

40"/48"Model use

28" Model use

➣ The product color and shape may vary depending on the model.

1 HDMI IN 1, 2(DVI), 3(ARC)

2 USB (5V 0.5A) / CLONING

3 VIDEO / L-AUDIO-R

4 EX-LINK

5 AUDIO OUT

6 ANT IN (AIR/CABLE)

7 DATA

When in Hotel mode (Interactive or Standalone), all Channel menu items in the Menu OSD except for the

Channel List are deactivated. If you need to change the channel line up, use the Channel Setup item in the

Hotel options menu.

Notice

Bolt + Nut

Top

Bottom

Afﬁx the stand to a

ﬂat surface such as a

dresser top, desk top, or

entertainment center as

shown.

WARNING: To prevent injury, you must attach this

TV securely to the ﬂoor, a table, a dresser top, etc.

with the Hotel Mount Kit as described in these

instructions.

Licence

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616,

7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the

Symbol, and DTS and the Symbol together are registered trademarks & DTS Premium Sound is a trademark

Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452,

5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and

7,764,802. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Studio

The terms HDMI and HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified®

device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your

files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD)

movies.

To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to

complete your registration.

DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274

Open Source License Notice

In the case of using open source software, Open Source Licenses are available on the product menu.

Open Source License Notice is written only English.

Speciﬁcations

Environmental onsiderations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

Model Name

HG28NC670

HG28NC677

Display Resolution

1366 x 768

Screen Size

(Diagonal)

28” Class

(28.0” measured diagonally)

Sound (Output)

5W x 2

Dimensions (WxDxH)

Body

With stand

25.3 x 15.6 x 2.5 inches

(643.4 x 396.5 x 62.9 (mm))

25.3 x 17.1 x 6.4 inches

(643.4 x 435.0 x 163.4(mm))

Weight

Without Stand

With Stand

8.6 lbs (3.9 kg)

9.5 lbs (4.3 kg)

Stand Swivel (Left / Right)

0˚

Model Name

HG40NC670

HG40NC677

HG48NC670

HG48NC677

Display Resolution

1920 x 1080

Screen Size

(Diagonal)

40" Class

(40.0" measured diagonally)

48" Class

(47.6" measured diagonally)

Sound (Output)

10W x 2

Dimensions (WxDxH)

Body

With stand

35.7 x 21.0 x 2.6 inches

(906.6 x 532.9 x 65.1 (mm))

35.7 x 22.7 x 8.9 inches

(906.6 x 577.6 x 226.5 (mm))

42.3 x 24.7 x 2.6 inches

(1075.1 x 627.5 x 65.5 (mm))

42.3 x 26.5 x 8.9 inches

(1075.1 x 673.5 x 226.5 (mm))

Weight

Without Stand

With Stand

16.8lbs (7.6kg)

23.1lbs (10.5kg)

24.0lbs (10.9kg)

30.6lbs (13.9kg)

Stand Swivel (Left / Right)

20° / 60° / 90°

➣ Design and speciﬁcations are subject to change without prior notice.

➣ This device is a Class B digital apparatus.

WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.

Dimensions

HG28NC670 / HG28NC677

43 5

(unit: inches)

1 2 3 4 5 6 7

HG28NC670

HG28NC677

25.3 24 13.7 15.6 17.1 6.4 2.5

HG40NC670 / HG40NC677 / HG48NC670 / HG48NC677

3 5

(unit: inches)

1 2 3 4 5 6 7

HG40NC670

HG40NC677

35.7 34.9 19.7 21 22.7 8.9 2.6

HG48NC670

HG48NC677

42.3 41.6 23.4 24.7 26.5 8.9 2.6

Connecting the TV with an SBB or STB

ETH MODEM

onnect the [DATA] jack of the TV to the [ETH MODEM]

jack of the STB (SBB) with the data cable.

✎ The “ETH MODEM” jack name that you connect

the Data Cable to may differ depending on the

SBB or STB type.

List of Vendors and Compatible Data Cables Supplied with the TV

♦ Refer to the code label on the data cable.

Note the

labeled end.

Confirm the code

on the Code Label

Note the

labeled end.

Vendor Cable code

Samsung OCC

Enseo Guest-Tek

BN39-00865B

NXTV BN39-01011B

nStreams BN39-01110A

MTI BN39-01011C

Hotel Plug & Play

The Hospital Plug & Play function, which automatically performs the Hospital Mode selection, Country Setup, Clock

Setup, and Picture Mode Setup, runs once when power is ﬁrst turned ON. Setup also runs automatically after you

have executed a Service Reset.

♦ Hospital Plug & Play OSD

- Initially highlighted: Interactive

- If you select the Standalone Only button, Standalone

hospital mode is set by default and the “Standalone

mode is set” OSD appears for 3 seconds.

- TV enters into RF mode automatically after displaying

the “Standalone mode is set” OSD for 3 seconds.

- If you select Interactive mode, the Interactive Setup

Menu is displayed. Press the power off key to exit the

Interactive menu.

- If you select Standalone Plug & Play mode, the “Select

Menu Language” OSD appears.

♦ Local Set

- Initially highlighted: US

- If you press the Enter key after selecting Change, you

can change the country.

- If the country is changed, the TV automatically turns off

and on.

- If you select Interactive mode, the Interactive Setup

Menu is displayed. Press the power off key to exit the

Interactive menu.

- If you select the incorrect country, execute TV Reset

again after entering the Service section of the Hospital

Menu.

♦ Select Menu Language OSD

- If you select Standalone from the “Select Hospital

TV Mode” OSD, the “Select Menu Language” OSD

appears.

- Initially highlighted: English

- Display time: OSD time out and operation are the same

as Samsung’s consumer TV models.

- If you press the Enter key, the “Picture Mode” OSD

appears

♦ Picture Mode OSD

- Initially highlighted: Standard.

- The TV displays the Picture Mode OSD where you can

choose Dynamic or Standard Picture mode.

♦ Auto Search Mode OSD

- If you press the Enter key, the TV automatically searches

for channels.

- The OSD Display time, which starts when the Auto Store

operation is completed and continues until the Auto

Sort function starts, is 30 seconds.

♦ Set Clock Mode, DST(Daylight saving time), and

Time Zone OSD

- Initially highlighted: Clock Mode : Auto, DST : Off, Time

Zone : Eastern

- If the TV will be tuned to digital broadcast channels, and

these channels transmit date and time information, set

the Clock Mode to Auto. The TV will set the date and

time automatically.

- If the TV will not be tuned to digital broadcast channels,

set the Clock Mode to Manual, and then set the date

and time on the TV manually.

- Set DST On or Off to apply or not apply daylight saving

time to the TV.- - Select your time zone on the map

appears.

DATA Cable

[TV Rear Panel]

21 3

TV Controller

The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the

remote control.

TV Controller

The image is drawn

as if you are facing the

front side of the TV.

Power off

Function menu

Remote control sensor

Return

Selecting the

Media Play

Selecting the

Select a source.

✎ The product color and shape may vary depending on the model.

✎ To exit the menu, press the Controller for more than 1 second.

✎ When selecting a function by moving the controller backwards/forwards/left/right, be sure not to press up on the controller. If you press up first, it will not

operate correctly.

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be

safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you

are away on vacation, for example). It is best to unplug the power cord.

♦ UI Scenario

Attention

Auto Program

Auto Program is incomplete.

0 channels are memorized

Change Settings Scan Again

DTV Air0

Air

DTV Cable

Cable

Self Diagnosis for TV

Self Diagnosis for HTV

SW Update

Service Pattern

ATV cable AGC Gain

OFF

DTV OpenCable AGC Gain

Sound Bar Out

OFF

Default

TV Reset

If you select

Change

If you select

Standalone Only

If you select

Interactive

TV will enter the RF mode.

Press Power OFF to exit.

Interactive

Hospitality Option Menu

appears.

If you don’t change the country of the Current Location

If you select Skip

If you select

Standalone Setup

Select your language

Press Power OFF to exit.

Select Picture mode

Select Clock Mode, DST, and your Time Zone

Select the channel

band to use for

Auto Program

After Searching

channels.

If you select Factory Reset, the TV resets all values to their factory

defaults and then displays the Hospital Plug & Play menu. Go to the

ﬁrst Hospital Plug & Play screen below.

The TV is automatically

turned off and on.

If you change the country

of the Current Location

Local Set

Change Locat Set if Located in North America, Latin America and Europe.

In other regions, Please press SKIP button move to the next step.

Current Localset : US

Change Skip

Local Set

Change Locat Set if Located in North America, Latin America and Europe.

In other regions, Please press SKIP button move to the next step.

Current Localset : US

Change Skip

Easy Set up

Intertactive

(Hotel Menu)

Standalone Setup

(Continue Setup)

Standalone Only

(End Setup)

If you select this, the

setup process will be

completed and go to

hotel menu

Select your Language

Select your language to start the on screen setup.

The Language Setting will be applied to Main Menu and not Plug and Play.

Press the ▲▼◄►

buttons to move the

highlight.

Press the enter button to

select.

English

Español

Français

age

Press

the

▲▼◄►

Configure your TV

Picture Mode Standard

Choose a picture mode

that best suits your

viewing enviroment.

Select your information in all of the categories

below.

TV Setup Complete!

Your TV is now ready to use

Auto Program

Antenna Both

Digital Cable System STD

Analog Cable System STD

Select current connected

antenna.

To get channels, set the options below then select

Scan.

Scan

Auto Program

Auto Program is channels for you...

Air 21

Stop

DTV Air0

Air

DTV Cable

Cable

Clock

-- : -- --

You can adjust your time to set DST, Time Zone and

clock mode

Set current date and time

Clock Mode Auto

Date

-- / -- / ----

Time

-- : -- --

DST Off

Time Zone Eastern

Local Set

Warning! TV might not function if local set is not correctly configured.

When Local set is changed, TV will turn off automatically to apply it.

Countries List

USA

Standalone

Hospitality Option Menu

appears.

Sound Bar

♦ Samsung Sound-Bars and Hotel TVs in 2014

- Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung

Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV’s sound

through the Sound-Bar.

(Security Screw, for 40”

and above models)

(Security Screw)

[HG670677-ZX-QSG]BN68-05850X-02L02.indd 1 2014-04-29  11:29:59

Para registrar este producto visite

www.samsung.com/register.

Guía rápida de conguración

Lista de componentes

Control remoto (AA59-00817A)

& y pilas (AAA x 2)

Cable de alimen

• Manual de instruccione

• Guía de seguri

Soporte sujetacables 1(EA)

Cable de datos (BN39-00865B, BN3

9-01011C)

Kit de montaje de hotel

Instalación del soporte del TV LED

♦ HG28NC670/HG28NC677/HG40NC670/HG40NC677/HG48NC670/HG48NC677

Componentes

Para instalar el soporte, use las piezas y los componentes suministrados.

28”

1 EA

40” 48”

1 EA

x8 (M4 X L12, modelos de 40

pulgadas y superiores)

x7 (M4 X L12)

• Soporte (según el modelo) • Soporte de la guía • Tornillos

• Tornillos de seguridad

(3EA)

(4EA, para modelos de 40” y superiores)

✎ Ponga un paño suave sobre la

mesa para proteger el televisor y

luego coloque éste encima con la

pantalla hacia abajo.

✎ Inserte la guía del soporte en

la ranura de la parte inferior del

televisor.

Parte trasera

2 3

(M4 X L12)

Vista superior

Lateral

(M4 X L12)

M4 x L12, para modelos

de 40” y superiores)

sólo modelos de

60” & 65” pulgadas

NO UTILIZAR

PETRÓLEO

NO UTILIZAR

GRASAS

NO UTILIZAR

PRODUCTOS

QUÍMICOS

✎ Asegúrese de distinguir entre la parte delantera y posterior del soporte y de la guía del soporte cuando los conecte.

✎ Asegúrese de que al menos dos personas levanten y muevan el televisor.

✎ Para conectar el soporte, apoye el producto con la pantalla hacia abajo sobre una superficie suave y luego, ajuste los tornillos.

✎ El número de tornillos puede variar dependiendo del modelo.

- El elemento de salida de la barra de sonido del menú de opciones de hotel le permite controlar por dónde saldrá el sonido

del televisor al encender el televisor.

Si la barra de sonido está activada, el sonido del televisor sale automáticamente sólo por el dispositivo de la barra de

sonido cuando se enciende el televisor.

Si la barra de sonido está desactivada, el sonido del televisor sale automáticamente sólo por el altavoz del televisor

cuando se enciende el televisor.

- Los modelos que admiten la función ARC figuran a continuación:

• Barra de sonido: HW-E350/E450/E550

HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F75

♦ Conﬁ guración de las barras de sonido en modo hotel.

- Confi gure las siguientes opciones del menú hotel:

• Hotel option > System > Sound Bar Out = On.

• Hotel option > Power On > Power On Volume = User Defined.

• Hotel option > Power On > Power On Volume Num > Set greater than 0.

• Hotel option > Power On > Max Volume > Set greater than 0.

- Conectar un cable HDMI de la entrada HDMI OUT en la parte posterior de la barra de sonido al puerto HDMI4 (que admite

ARC) en el televisor del hotel.

- Una vez conectada la barra de sonido al televisor del hotel, cuando se enciende el televisor, la barra de sonido

automáticamente detecta el televisor, y luego automáticamente cambia a modo hotel.

Características funcionales del modo hotel de la barra de sonido:

• El encendido/apagado está sincronizado con el televisor

• HDMI_CEC predeterminado en encendido

• Funciona a través del puerto “HDMI OUT” únicamente

• Deshabilita la tecla “Modo de entrada” en la VFD para impedir cambios inesperados en la fuente de audio.

Adquiere las configuraciones de encendido y volumen máximo ajustables del menú opción hotel del televisor. Sin

embargo, los valores de volumen de encendido y volumen máximo de la barra de sonido son la mitad de los valores

equivalentes del menú opción hotel del televisor. Ejemplo: Si el volumen de encendido del televisor es 20 y el volumen

máximo es 90, entonces el volumen de encendido de la barra de sonido es 10 y el volumen máximo es 45.

Especiﬁcaciones del kit de montaje de pared (VESA)

Instale el montaje de pared en una pared sólida, perpendicular al suelo. Si está conectando el montaje de pared a

materiales de construcción que no sean una placa de yeso, comuníquese con su distribuidor más cercano. Si está

instalado en el techo o en una pared inclinada, el televisor puede caerse y causar graves lesiones personales.

➣ Las dimensiones estándar de los kits de montaje de pared se muestran en la tabla que sigue.

➣ Los kits de montaje de pared Samsung contienen un manual de instalaciones detallado. Se proveen todas las piezas

necesarias para el montaje.

➣ No use tornillos que no cumplan las especi caciones de tornillos estándar VESA.

➣ No use tornillos con una longitud superior a la medida estándar o que no cumplan con las especi caciones de tornillos

estándar VESA. Los tornillos que son demasiado largos pueden causar daños en el interior del televisor.

➣ Para montajes de pared que no cumplen las especi caciones de tornillos estándar VESA, la longitud de éstos puede

variar dependiendo de las especiﬁ caciones del montaje de pared.

➣ No apriete excesivamente los tornillos, ya que podría dañar el producto o provocar su caída con riesgo de causar

lesiones personales. Samsung no se hace responsable de este tipo de accidentes.

➣ Samsung no se hace responsable de daños o lesiones personales cuando se usa un montaje de pared que no cumple

las especiﬁ caciones VESA o si el cliente no sigue las instrucciones de instalación del producto.

➣ No monte el televisor con una inclinación de más de 15 grados.

➣ Siempre son necesarias dos personas para montar el televisor en la pared.

Familia de

producto

Tamaño del

televisor en

pulgadas

Especiﬁ caciones

VESA (A * B) en milímetros

Tornillo estándar Cantidad

LED-TV

28 100 X 100

40 200 X 200

48 400 X 400

No instale el equipo de montaje de pared mientras el televisor está encendido. Se podría producir una

descarga eléctrica con riesgo de causar lesiones personales.

♦ Montaje del soporte giratorio

Los televisores LED de 40” y superiores tienen soportes giratorios. Puede conﬁ gurar estos soportes de modo que el

televisor gire 20 grados hacia la izquierda y hacia la derecha, 60 grados hacia la izquierda y hacia la derecha, o 90 grados

hacia la izquierda y hacia la derecha usando el SOPORTE GIRATORIO.

Soporte giratorio de 20°

Para conﬁ gurar el televisor de modo que gire 20° hacia la izquierda y hacia la derecha, inserte la pata en la parte inferior del soporte

a través del oriﬁ cio curvado del soporte giratorio marcado 20°. Luego, ajuste el soporte giratorio a la base usando los tres tornillos

suministrados como se muestra a la izquierda.

Soporte giratorio de 60°

Para conﬁ gurar el televisor de modo que gire 60° hacia la izquierda y hacia la derecha, inserte la pata en la parte inferior del soporte

a través del oriﬁ cio curvado del soporte giratorio marcado 60°. Luego, ajuste el soporte giratorio a la base usando los tres tornillos

suministrados como se muestra a la izquierda.

Soporte giratorio de 90°

Para que el televisor gire 90° hacia la izquierda y hacia la derecha, retire el soporte giratorio y, luego, coloque los tres tornillos

suministrados al soporte como se muestra a la izquierda.

♦ Kit de montaje de hotel

Tornillos cortos (2 unid.) Tornillos largos (2 unid.)

Tuercas (2 unid.) Arandelas (2 unid.)

Vista del panel de conexiones

- SIDE -

HDMI IN 1

HDMI IN 2

(DVI)

(5V 0.5A)

/CLONING

AV IN

AUDIO

VIDEIO

HDMI IN

3 (ARC)

EX-LINK

AUDIO OUT

ANT IN

AIR/CABLE

- SIDE -

HDMI IN 1

HDMI IN 2

(DVI)

(5V 0.5A)

/CLONING

AV IN

AUDIO

VIDEO

HDMI IN

3 (ARC)

EX-LINK

AUDIO OUT

ANT IN

AIR/CABLE

40"/48"Model use

28" Model use

➣ El color y la forma del producto pueden variar según el modelo.

1 HDMI IN 1, 2(DVI), 3(ARC)

2 USB (5V 0.5A) / CLONING

3 VIDEO / L-AUDIO-R

4 EX-LINK

5 AUDIO OUT

6 ANT IN (AIR/CABLE)

7 DATA

En el modo Hotel (Interactivo o Independiente), todos los elementos del menú de canales de la OSD del

menú, excepto la lista de canales, se desactivan. Si necesita cambiar el número del canal, utilice el elemento

Conguración de canales del menú de opciones de Hotel.

Aviso

Tornillos +

Tuercas

Superior

Inferior

Fije el soporte a una

superﬁ cie plana

como una cómoda,

escritorio o centro de

entretenimientos según

se muestra.

ADVERTENCIA: Para prevenir lesiones, debe

conectar este televisor con ﬁrmeza al piso, a

un escritorio, a una cómoda, etc., con el kit de

montaje de hotel según se describe en estas

instrucciones.

LiLicencia

Fabricado bajo licencia de Dolby Laboratories. Dolby y el símbolo de doble D son marcas de Dolby