Funai 6513DA Manual de usuario

Marca: Funai

Modelo: 6513DA

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

13-INCH COLOR TV/DVD

6513DA

OWNER’S

MANUAL

If you need additional assistance for set-up or operating

after reading owner’s manual, please call

TOLL FREE : 1-800-968-3429.

Please read before using this equipment

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

1.Read instructions-All the safety and operating instructions

should be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions

should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the

operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions

should be followed.

5.Cleaning-Unplug TV/DVD from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the possi-

bility of the loss of an authorization code for a CATV con-

verter, is not intended to be unplugged by the user for clean-

ing or any other purpose, may exclude the reference to

unplugging the appliance in the cleaning description other-

wise required in item 5.

6.Attachments-Do not use attachments not recommended by

the TV/DVD manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this TV/DVD near water-

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool,

and the like.

8.Accessories-Do not place this TV/DVD on an unstable cart,

stand, tripod, bracket, or table. The TV/DVD may fall, caus-

ing serious injury to someone, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufac-

turer, or sold with the TV/DVD. Any

mounting of the appliance should

follow the manufacturer’s instruc-

tions and should use a mounting

accessory recommended by the man-

ufacturer. An appliance and cart

combination should be moved with

care.

Quick stops, excessive force, and

uneven surfaces may cause the appliance and cart combina-

tion to overturn.

Accessoires- Ne placez pas cette TV/DVD sur une table

roulante, un support, un trépied, une console ou une table

instable. Cette TV/DVD risquerait de tomber, pouvant

gravement blesser quelqu'un et l'appareil même pourrait

être sérieusement endommagé. N'utilisez qu'une table

roulante, un support, un trépied, une console ou une table

recommandé par le fabriquant, ou vendu avec la TV/DVD.

Pour n'importe quelle installation de l'appareil, on devra

suivre les instructions du fabriquant et l'on devra utiliser les

accessoires d'installation recommandés par le fabriquant.

L'ensemble combiné de l'appareil avec une table roulante

devra être déplacé avec précaution. Des arrêts brusques,

une force excessive et des surfaces inégales peuvent provo-

quer le renversement de l'ensemble combiné de

l'appareil/table roulante.

9.Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the TV/DVD and to protect it from overheat-

ing, and these openings must not be blocked or covered.

The openings should never be blocked by placing the

TV/DVD on a bed, sofa, rug, or other similar surface. This

TV/DVD should never be placed near or over a radiator or

heat register. This TV/DVD should not be placed in a built-

in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions

have been adhered to.

10.Power Sources-This TV/DVD should be operated only

from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local power

company. For TV/DVDs intended to operate from battery

power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV/DVD is equipped

with a polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

- 2 - EN

0C28

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT

WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

The caution marking is located on the rear of the cabinet.

IMPORTANT SAFEGUARDS

PORTABLE CART WARNING

AVERTISSEMENT POUR UNE

TABLE ROULANTE PORTATIVE

S3126A

- 3 - EN

0C28

GROUND CLAMPS

NEC - NATIONAL ELECTRICAL CODE

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

S2898A

WIRE

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ELECTRODE SYSTEM

(NEC ART 250, PART H)

SERVICE

EQUIPMENT

CLAMP

ANTENNA

LEAD IN

ANTENNA

POWER SERVICE GROUNDING

GROUND

ELECTRIC

FIGURE A

12.Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

13.Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV/DVD, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect to

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements

for the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV/DVD receiver

during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the TV/DVD due to lightning and

power-line surges.

15.Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be fatal.

16.Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind

into this TV/DVD through openings as they may touch dan-

gerous voltage points or short out parts that could result in

a fire or electric shock. Never spill liquid of any kind on

the TV/DVD.

18.Servicing-Do not attempt to service this TV/DVD yourself

as opening or removing covers may expose you to danger-

ous voltage or other hazards. Refer all servicing to qualified

service personnel.

19.Damage Requiring Service-Unplug this TV/DVD from

the wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the

TV/DVD.

c. If the TV/DVD has been exposed to rain or water.

d. If the TV/DVD does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions, as improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the TV/DVD to its normal operation.

e. If the TV/DVD has been dropped or damaged in any way.

f. When the TV/DVD exhibits a distinct change in perfor-

mance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21.Safety Check-Upon completion of any service or repairs to

this TV/DVD, ask the service technician to perform routine

safety checks to determine that the TV/DVD is in proper

operating condition.

22.Heat-This TV/DVD product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

RADIO-TV INTERFERENCE

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be deter-

mined by turning the equipment off and on, the

user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment

and receiver.

3) Connect the equipment into an outlet on a cir-

cuit different from that to which the receiver is

connected.

4) Consult the dealer or an experienced radio/TV

technician for help.

- 4 - EN

0C28

FCC WARNING- This equipment may gener-

ate or use radio frequency energy. Changes or

modifications to this equipment may cause

harmful interference unless the modifications

are expressly approved in the instruction man-

ual. The user could lose the authority to oper-

ate this equipment if an unauthorized change

or modification is made.

PRECAUTIONS

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public perfor-

mance and lending of discs are prohibited.

LASER SAFETY

This unit employs a laser. Only a qualified service

person should remove the cover or attempt to ser-

vice this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUST-

MENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN AND INTERLOCK

DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK

MECHANISM.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est con-

forme à la norme NMB-003 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC

ÉLECTRIQUES, INTRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER JUSQU’AU FOND.

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

- 5 - EN

0C28

LOCATION

For safe operation and satisfactory performance of

your TV/DVD, keep the following in mind when

selecting a place for its installation:

•

Shield it from direct sunlight and keep it away

from sources of intense heat.

•

Avoid dusty or humid places.

•

Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes

at the top and bottom of the unit. Do not place the

unit on a carpet because this will block the ventila-

tion holes.

•

Install unit in a horizontal position.

•

Avoid locations subject to strong vibration.

•

Do not place the TV/DVD near strong magnetic fields.

•

Avoid moving TV/DVD to locations where temper-

ature differences are extreme.

•

Do not handle the power cord with wet hands.

•

Do not pull on the power cord when disconnecting

it from an AC wall outlet. Grasp it by the plug.

•

If, by accident, water is spilled on your unit, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

•

Do not put your fingers or objects into the

TV/DVD disc loading tray.

•

Do not place anything directly on top of the unit.

WARNING

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place,

or after heating a cold room or under conditions of

high humidity. If a DVD is played in a TV/DVD

which has moisture, it may damage the DVD and

TV/DVD. Therefore when the condensation occurs

inside the unit, turn the POWER button on and allow

at least 2 hours for the unit to dry out.

The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial

number as yours. You should record the number and other vital information here and retain this book as a per-

manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-

tions concerning chemical wastes.

- 6 - EN

0C28

TABLE OF CONTENTS

C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

AVOID THE HAZARDS OF ELECTRICAL

SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .7

C OPERATING CONTROLS AND FUNCTIONS 8

C PREPARATION FOR USE . . . . . . . . . . . . . . .10

ANTENNA/CABLE CONNECTIONS . . . . . . .10

INSTALLING THE BATTERIES . . . . . . . . . . .12

CONNECTING TO EXTERNAL INPUT JACKS

CONNECTING TO A STEREO SYSTEM (for DVD)

.13

CONNECTING TO AN AMPLIFIER

EQUIPPED WITH DIGITAL INPUT JACKS,

MD DECK OR DAT DECK (for DVD) . . . . . .13

CONNECTING TO A DOLBY DIGITAL

DECODER OR DTS DECODER (for DVD) . .14

TV SECTION

C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .15

LANGUAGE SELECTION . . . . . . . . . . . . . . .15

CHANNEL PRESETTING . . . . . . . . . . . . . . .15

C OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . .16

WATCHING A TV PROGRAM . . . . . . . . . . . .16

SELECTING THE SLEEP TIMER . . . . . . . . .16

CLOSED CAPTION . . . . . . . . . . . . . . . . . . . .16

PICTURE ADJUSTMENT . . . . . . . . . . . . . . . .17

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .18

DVD SECTION

C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .20

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .20

DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .20

SYMBOLS USED IN THIS MANUAL . . . . . .20

C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .21

PLAYING A DVD VIDEO OR AN AUDIO CD

.21

USING THE DVD MENUS . . . . . . . . . . . . . . .21

USING THE TITLE MENU . . . . . . . . . . . . . . .22

PAUSING PLAYBACK OR DISPLAYING

A STILL PICTURE . . . . . . . . . . . . . . . . . . . . .22

RESUMING PLAYBACK FROM THE

POINT WHERE PLAYBACK STOPPED . . . .22

STEPPING THROUGH FRAMES . . . . . . . . . .22

FAST FORWARD/REVERSE . . . . . . . . . . . . .23

SLOW MOTION . . . . . . . . . . . . . . . . . . . . . . .23

STARTING FROM A DESIRED TRACK . . . .23

STARTING FROM A DESIRED TIME COUNT

.23

PLAYING FROM A DESIRED TITLE OR

CHAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

RANDOM (Audio CD) . . . . . . . . . . . . . . . . . .24

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . .25

PROGRAM (Audio CD) . . . . . . . . . . . . . . . . .25

C SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . .26

CHANGING THE AUDIO LANGUAGE OR

SOUND MODE . . . . . . . . . . . . . . . . . . . . . . . .26

CHANGING THE SUBTITLE LANGUAGE . .27

CHANGING THE CAMERA ANGLE

(Multi-Angle Pictures) . . . . . . . . . . . . . . . . . . .27

CHANGING THE ON-SCREEN DISPLAY . . .28

C CHANGING THE SETUP ITEMS . . . . . . . . .29

LANGUAGE SETTINGS . . . . . . . . . . . . . . . .29

VIDEO SETTINGS . . . . . . . . . . . . . . . . . . . . .30

AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .30

PARENTAL LOCK . . . . . . . . . . . . . . . . . . . . .31

OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . .32

C LANGUAGE CODE LIST . . . . . . . . . . . . . . . .33

C TROUBLESHOOTING GUIDE . . . . . . . . . . .34

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .37

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .37

C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .38

C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

- 7 - EN

0C28

FEATURES

•

Tinted, Bright Black Matrix Picture Tube

•

181 Channel Selection– All VHF/UHF channels

plus up to 125 cable channels.

•

PLL Frequency Synthesized Tuning– The latest

PLL frequency synthesized electronic tuning sys-

tem provides free and easy channel selection, and

lets you tune directly to any channel using the

channel number buttons (0~9 and +100-key) on the

remote control.

•

On-Screen Function Display.

•

Full-Function Remote Control

•

Sleep Timer

•

Closed Caption Decoder– You may view special-

ly labeled (cc) TV programs, movies, news, prere-

corded tapes, etc. with either a dialogue caption or

text display added to the program.

•

Auto Shut Off Function– If there is no air signal

input from the antenna terminal and no operation

for 15 minutes, the TV will turn itself off automati-

cally.

•

V-CHIP– Enables parents to prevent their children

from watching inappropriate material on TV.

•

Dolby Digital sound– This player can handle

Dolby Digital surround sound having 5.1 channels

when connected to a Dolby Digital decoder.

•

Still/fast/slow/step playback– Various playback

modes are available including still pictures, fast

forward/reverse, slow motion and step frames.

•

Random playback for audio CD– This player can

shuffle the order of tracks to play them in random

order.

•

Program playback for audio CD– You can pro-

gram the order of tracks to play them in any

desired order.

•

DVD menus in a desired language– You can dis-

play DVD menus in a desired language, if avail-

able on a DVD.

•

Screen saver and auto power-off functions–

Screen saver is automatically activated when there

is no input from the player or the remote control

for one minute in stop mode. The power is auto-

matically turned off when there is no input for 31

minutes in still or stop mode.

•

Subtitles in a desired language– You can select a

desired language for the display subtitles, if that

language is available on a disc.

•

Selecting a camera angle– You can select the

desired camera angle, if a disc contains sequences

recorded from different angles.

•

Choices for audio language and sound mode–

You can select the desired audio language and

sound mode, if different languages and modes are

available on a disc.

•

Parental lock– You can set the control level to

limit playback of discs which may not be suitable

for children.

•

Automatic detection of discs– This player auto-

matically detects if a loaded disc is DVD or audio

CD.

•

On-screen display– Information about the current

operation can be displayed on a TV screen, allow-

ing you to confirm the currently active functions

(such as program playback), on the TV screen

using the remote control.

SUPPLIED ACCESSORIES

•

If you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800-

968-3429.

•

Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators

(Splitter). Contact your local electronics store for these items.

Remote Control Unit 2 AA Batteries Rod Antenna

PART NO. (N0285UD) PART NO. (0EMN00673)

TV DVD

- 8 - EN

0C28

OPERATING CONTROLS AND FUNCTIONS

- TV/DVD FRONT PANEL - [Fig. 1]

Disc loading tray

2.VIDEO input jack– Connect to the video output

jack of a video camera or VCR.

3.AUDIO L/R input jacks– Connect to the audio

output jacks of a video camera or VCR.

4.POWER button–

Press to turn the power on and off.

5.VOLUME K/L buttons– Press to control the vol-

ume level for the DVD and TV.

6.CHANNEL K/L buttons– Press to select memo-

rized channel.

7.Remote Sensor Window

8.STOP button– Stops operation of the disc.

9.REV button– Fast reverses playback to a desired

point.

10.PLAY button– Starts playback of the disc contents.

11. FWD button– Fast forwards playback to a desired

point.

12.PAUSE button– Pauses the current disc operation.

13.OPEN/CLOSE button– Press to insert discs into

or remove them from the tray.

14.HEADPHONE jack– To connect headphone (not

supplied) for personal listening.

15.TV button– Press to do TV operations.

16.NUMBER button–

TV Mode:

Press two digits to directly access the desired

channel.

Remember to press a "0" before a single digit

channel.

+100 button–

Press to select cable channels which are equal or

greater than number 100.

DVD Mode:

Press to enter the desired number.

+10 button–

Press to enter the desired numbers which are

equal or greater than number 10.

- REMOTE CONTROL - [Fig. 2]

L-AUDIO-RVIDEO

POWER

VOLUME CHANNEL STOP SKIP PLAY SKIP

PAUSE

HEADPHONE

OPEN/CLOSE

2 4 7 8 18 10 18 12 13 143 5 61

POWER

123

456

789

+10

OPEN/

REV

PLAY

STOP

FWD

ENTER

PAUSE

RETURN

TITLESETUP

MODE

REPEAT

SEARCH MODE

CLEAR

CH.

SKIP

SLEEP +100

VOL.

SELECT

MUTE

SLOW

TV DVD

ANGLE

SUBTITLE

AUDIODISPLAY

•

To use as TV remote control, press the TV but-

ton on the remote control after TV mode is

selected. TV operation buttons have been indi-

cated by blue or white.

•

To use as DVD remote control, press the DVD

button on the remote control after DVD mode is

selected. DVD operation buttons have been

indicated by yellow or white.

- 9 - EN

0C28

- REAR VIEW - [Fig. 3]

ANT.

AUDIO OUT

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL

37 38 4039

30.RETURN button– Returns to the previous opera-

tion.

31.ENTER button– Press to accept a setting.

32.Arrow buttons–

TV Mode:

Press to select a setting mode from the menu on

the TV screen.

Press to select or adjust from a particular menu.

DVD Mode:

Use when making settings while watching the dis-

play on a TV screen.

33.MENU button– Displays the DVD and TV menus.

34.SELECT button– Press to change of TV mode,

external input mode or DVD mode.

35.MUTE button– Press the MUTE button to turn off

the sound portion of the TV program. (Volume

level display turns LIGHT RED from LIGHT

BLUE.) Press the MUTE button again or press

the VOL(ume) K or L button to restore sound.

36.DVD button– Press to do DVD operations.

37.Power cord– Connect to a standard AC outlet

(120V/60Hz).

NOTE: Remove the power cord from the hook to

avoid breaking a wire before you connect to a

standard AC outlet.

38.COAXIAL digital audio out jack– Connect to the

other amplifier or decoder.

39.AUDIO L/R output jack– Connect to the other

amplifier or decoder.

40.ANT. in jack– Connect to an antenna, cable sys-

tem, or satellite system.

17.SLEEP button– Press the SLEEP button to dis-

play the sleep timer and start the function. The

shut off time can be determined by the number of

times you press the button. (0, 10, 20, 30,..90, 0

minutes)

18.SKIP buttons– Skip chapters or tracks to a

desired point.

19.MODE button– Activates program playback or

random playback mode.

20.SETUP button– Press to enter the setup mode or

to change setup items.

21.TITLE button– Displays the title menu.

22.CLEAR button– Resets a setting.

23.DISPLAY button–

TV Mode:

Press to display the channel number on the

screen. If you press it again, the channel number

will disappear.

DVD Mode:

Displays the current status on the TV screen for

checking purposes.

24.SEARCH MODE button– Press to locate a

desired point.

25.AUDIO button– Press to select a desired audio

language or sound mode.

26.SUBTITLE button– Press to select a desired sub-

title language.

27.REPEAT button– Repeats playback of the cur-

rent disc, title, chapter or track.

28.ANGLE button– Press to change the camera

angle to see the sequence being played back from

a different angle.

29.A-B REPEAT button– Repeats playback of a

selected section.

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

VHF/UHF COMBINED ANTENNA

The VHF/UHF Rod Antenna (supplied) is detachable. Insert the stem of the antenna into the hole on the upper-

back portion of the TV/DVD. Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the

ANT. terminal of the TV/DVD as shown in the diagram below. For the best reception, fully extend the

VHF/UHF Rod Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.)

NOTE:

Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten

the pin as illustrated, then plug the pin into antenna terminal.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor antenna.

ANT.

AUDIO OUT

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL

Bent pin

Cable Plug

(Needs to be straightened)

(Straight pin)

ANT.

AUDIO OUT

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL

ANT.

NOTE:

The connection of an indoor antenna may not always give acceptable TV reception.

[Fig. 4]

[Fig. 5]

Rod Antenna

(Supplied)

VHF/UHF Antenna

(Not supplied)

VHF/UHF

Combiner

(Not

supplied)

Flat twin-lead cable

UHF Antenna

(Not supplied)

VHF Antenna (Not supplied)

- 10 - EN

0C28

- 11 - EN

0C28

CABLE WITH CONVERTER/

DESCRAMBLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic

connection shown here.

ANT.

AUDIO OUT

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL

ANT.

OUT

[Fig. 7]

From Cable System

or Satellite Dish

75-ohm Coaxial

Cable

(Not supplied)

Satellite Box or

Cable Box (Not supplied)

CABLE WITHOUT CONVERTER/

DESCRAMBLER BOX

Use this connection if your cable system connects directly to your TV/DVD without a converter box.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connect-

ed to the grounding system of the building as close to the point of cable entry as practical.

ANT.

AUDIO OUT

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL

ANT.

[Fig. 6]

From Cable System

75-ohm Coaxial

Cable (Not

supplied)

- 12 - EN

0C28

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-)

markings.

3)Replace the cover.

CONNECTING TO EXTERNAL INPUT JACKS

When you watch a program recorded on an another source (VCR or video camera), use the audio/video input

jacks on the front of the TV/DVD.

Connect the audio/video output jacks of another source to the AUDIO L/R and VIDEO jacks of this TV/DVD.

Then press the SELECT button until "VIDEO" appears on the screen.

NOTE:

•

When you connect a monaural VCR (another source) to this TV/DVD, connect the Audio output jack of the

monaural VCR (another source) to the AUDIO L jack of this TV/DVD. The audio will output in both L and

R channel equally.

L-AUDIO-RVIDEO

[Another source]

To the audio

output jacks

Audio/Video

coaxial cable

(not supplied)

etc.

To the video

output jack

[Front of the TV/DVD]

[Fig. 8]

- 13 - EN

0C28

CONNECTING TO A STEREO SYSTEM (for DVD)

ANT.

AUDIO OUT

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL

To Right (red) and Left (white)

AUDIO OUT jacks

(only DVD AUDIO OUT)

Stereo system

To ANALOG AUDIO INPUT jacks

NOTES:

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the

TV/DVD.

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS, MD DECK OR DAT DECK (for DVD)

Use audio coaxial digital cables (commercially available) for the audio connections.

NOTES:

•

The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital

sound by an MD or DAT deck.

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a TV/DVD using

incorrect settings may generate noise distortion, and may also damage the speakers.

•

When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and

you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.

ANT.

AUDIO OUT

To COAXIAL DIGITAL

AUDIO INPUT jack

Amplifier equipped with digital

input jacks, MD deck,

DAT deck, etc.

To COAXIAL digital

audio out jack

(only DVD AUDIO OUT)

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL

[Fig. 9]

[Fig. 10]

- 14 - EN

0C28

CONNECTING TO A DOLBY DIGITAL DECODER

OR DTS DECODER (for DVD)

If using this TV/DVD to play back a TV/DVD in a 5.1 channel Dolby Digital surround or DTS surround for-

mat, the TV/DVD outputs a Dolby Digital or DTS data stream from its COAXIAL digital audio out jack. By

hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambi-

ence with powerful and high-quality surround sound of a professional standard such as can be heard in movie

theaters.

Use audio coaxial digital cables (commercially available) for the audio connections.

NOTES:

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.

•

If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.

•

Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for

audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion,

and may also damage the speakers.

•

When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and

you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.

ANT.

AUDIO OUT

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL

Front speaker

(left)

Center

speaker

Front speaker

(right)

Surround

speaker

(left)

Surround

speaker

(right)

Subwoofer

To COAXIAL DIGITAL

AUDIO OUT jack

(only DVD AUDIO OUT)

To COAXIAL DIGITAL

AUDIO INPUT jack

Dolby Digital

or DTS decoder

Manufactured under license from Dolby

Laboratories.“Dolby” and the double-D

symbol are trademarks of Dolby

Laboratories. Confidential Unpublished

“DTS”and “DTS Digital Out”are trademarks of

Digital Theater Systems, Inc.

[Fig. 11]

- 15 - EN

0C28

SET UP FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen

menu, follow the procedure below.

Press the MENU button so that the

menu display appears on the TV

screen.

Press the Arrow K or L button to

point to "LANGUAGE".

Select "ENGLISH", "ESPAÑOL" = Spanish or

"FRANÇAIS" = French by using the Arrow B or s

button.

Press the MENU button to exit the menu.

NOTE: An on-screen display language must be

selected each for the TV mode and DVD mode.

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

CHANNEL PRESETTING

To preset a channel or to change a preset channel,

follow the procedure below.

Press the MENU button so that the

menu display appears on the TV

screen.

Press the Arrow K or L button to

point to "CHANNEL SET". Then,

press the Arrow B button.

Press the Arrow K or L button to

point to "AUTO MEMO". Then,

press the Arrow B button.

The tuner scans and memorizes all

active channels in your area.

•

The TV distinguishes between standard TV chan-

nels and cable channels.

•

When AUTO MEMO action is completed, the low-

est memorized channel reappears on the screen.

•

When you press the Arrow K or L button after

selecting AUTO MEMO, the tuner will stop at the

memorized channels only.

•

The TV may recognize TV channels to be CATV

channels by the receiving conditions. In this case,

try AUTO MEMO action again in the fine receiv-

ing conditions.

[ADD/DELETE FUNCTION]

1)Press the MENU button so that the menu display

appears on the TV screen.

2)Press the Arrow K or L button to point to "CHAN-

NEL SET". Then, press the Arrow B button.

3)Press the Arrow B button so that

"ADD/DELETE" is selected.

4)Use the Arrow K or L button to

select the channel you wish to

put into memory or to erase from

memory.

NOTE: The display will return to the screen in

about 10 seconds. Perform "ADD/DELETE" func-

tion while this display appears on the screen.

•

Press the Arrow B or s button

to light up the channel number in

LIGHT BLUE if you wish to

add the channel into memory.

•

Press the Arrow B or s button

to light up the channel number in LIGHT RED if

you wish to erase the channel from memory.

5)Press the MENU button to exit the menu.

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

ADD/DELETE

AUTO MEMO

ADD/DELETE

AUTO MEMO

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

Getting started

Connect the power cord to a standard AC outlet.

NOTE: If some digits appear in the corner of the

screen, press the POWER button without unplugging

the power cord.

Press the POWER button to turn on the TV/DVD.

Press the SELECT button on the remote control until

channel number or "TV" appears on the screen.

Then press the TV button.

TV SECTION

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

OPERATIONS

- 16 - EN

0C28

WATCHING A TV PROGRAM

Select the desired channel with the CH(annel) K or

L button.

Adjust the volume to the desired listening level using

the VOL(ume) K or L button.

Adjust picture controls for a natural looking image.

(See "PICTURE ADJUSTMENT".)

SELECTING THE SLEEP TIMER

The sleep timer function enables you to shut off the

power without pressing the POWER button after a

desired time period.

Press the SLEEP button on the remote control.

You may change the sleep time

with pressing the SLEEP button on

the remote control repeatedly. The

timer is set up to 90 minutes, 10

minutes each time the SLEEP button is pushed. (The

timer display counts up and sleep timer will be dis-

played on the screen when you press the SLEEP but-

ton on remote control.)

NOTES:

•

When you disconnect the unit from the AC outlet,

or if you have a power failure, the sleep time will

be lost.

•

When the TV mode is changed to the DVD mode,

the sleep time will be lost.

SLEEP 10

To cancel the sleep timer:

Press the SLEEP button repeatedly until "SLEEP 0"

is displayed.

CLOSED CAPTION

This TV can receive C1 and C2 of Caption and Text.

CAPTION MODE

1)Characters can be displayed on the TV screen when

the received broadcast signal contains the Caption

Signals.

2)Paint-on mode: Displays input characters on the

screen immediately.

Pop-on mode: Once characters are stored in mem-

ory, it is displayed all at once.

Roll-up mode: Displays the characters continuous-

ly by scrolling (max. 4 lines)

NOTE: If the CAPTION C1 or C2 is selected but the

caption signal is not included, characters will not be

displayed.

TEXT MODE

1)Displays the text on the screen by scrolling (max. 7

lines)

2)If the received broadcast signal does not contain

the caption or text signal, no change will occur.

NOTES:

1)When your TV receives a special effects playback

signal (i.e., Search, Slow, Still) from a VCR’s

video output channel (CH3 or CH4), your TV may

not display the correct caption or text.

2)Captions and texts may not match the TV voice

exactly.

3)Interference may cause the closed caption system

not to function properly.

4)The caption or text characters will not be displayed

while the menu display or function’s display is

shown.

5)If you see this screen!!

If your TV displays a black box on the screen, this

means that your TV is set to TEXT mode. To clear

screen, select CAPTION C1, C2 or CAPTION

[OFF].

- 17 - EN

0C28

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV programs,

movies, news, prerecorded tapes, etc. with either a

dialogue caption or text display added to the pro-

gram.

Press the MENU button so that the menu display

appears on the TV screen.

Press the Arrow K or L button to point to "CAP-

TION".

Press the Arrow B or s button to select the mode

you wish.

When done, press the MENU button to exit the

menu.

: Press the Arrow

B or s

button.

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [ C1]

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [ C2]

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [ T1]

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [ T2]

PICTURE ADJUSTMENT

GAME MODE

Set to the most suitable position for TV GAME.

[B] : ON

[s] : OFF

BRIGHT

Adjust until the whitest parts of the picture are as

bright as you prefer.

[B] : increase brightness

[s] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[B] : increase contrast

[s] : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[B] : be brilliant color

[s] : be pale color

TINT

Adjust to obtain natural skin tones.

[B] : greenish tone

[s] : reddish tone

NOTES:

•

In the above steps, the picture adjustment display

will disappear from the TV screen after about 10

seconds unless you press any buttons, even though

you may not be finished. Press the MENU and

Arrow B button so that "PICTURE" mode is

selected. Then, press the Arrow K or L button

repeatedly until the display returns to the screen.

•

If you adjust the other Picture control after you set

the Game mode to [ON], the Game mode is set to

[OFF] automatically. If you want to set the Game

mode, reset it to [ON].

[ ]

GAME MODE

[ ]

OFF ON

[ ]

BRIGHT

[ ]

CONTRAST

[ ]

COLOR

[ ]

TINT

[ ]

: Press the Arrow ▲ or ▼ button.

Press the MENU button so that the menu display

appears on the TV screen.

Press the Arrow B button so that "PICTURE" mode

is selected.

Select the feature you wish to adjust with the Arrow

K or L button and adjust it with the Arrow B or s

button.

- 18 - EN

0C28

V-CHIP SET UP

V-CHIP enables parents to prevent their children

from watching inappropriate material on TV.

V-CHIP reads the ratings for programming (except

for news and sports programs, unedited movies on

premium cable channels, and Emergency Broadcast

System signals), then denies access to programming

if the program's rating meets the limitations you

select. In this case, "PROTECTED PROGRAM by

..." message appears on the TV screen.

To block ratings, follow the steps below.

•

Programming may be rated by the Motion Picture

Association of America (MPAA) or according to

the Television Parental Guidelines. In order to

block any inappropriate programming, set your

limits in both places (MPAA RATING and TV

RATING).

•

You cannot access the menu when the "PROTECT-

ED PROGRAM by ..." message appears. In this

case, change to the unblocked channel, then press

the MENU button.

[MPAA RATING SET UP]

Press the MENU button so that the menu display

appears on the TV screen.

Press the Arrow K or L button to

point to "V-CHIP SET UP". Then,

press the Arrow B button.

Press the Arrow K or L button to

point to "MPAA RATING". Then,

press the Arrow B button.

Press the Arrow K or L button to

point to your desired item.

Then, press the Arrow B button to

select [BLOCK] or [VIEW].

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

G [VIEW]

[VIEW]

PG-13

[VIEW]

[BLOCK]

NC-17

[BLOCK]

TV RATING

MPAA RATING

•

When you select the rating category and turn it

[BLOCK], the higher rating will turn [BLOCK]

automatically. Also, the lower rating will turn

[VIEW] automatically.

•

When you turn "G" to [BLOCK] or [VIEW], the

all ratings will turn to [BLOCK] or [VIEW] auto-

matically.

•

When you turn "X" to [VIEW], the all ratings will

turn to [VIEW] automatically.

Press the MENU button to exit the menu.

[TV RATING SET UP]

Press the MENU button so that the menu display

appears on the TV screen.

Press the Arrow K or L button to

point to "V-CHIP SET UP". Then,

press the Arrow B button.

Press the Arrow K or L button to

point to "TV RATING". Then,

press the Arrow B button.

Press the Arrow K or L button to

point to your desired item. Then,

press the Arrow B button to select

[BLOCK] or [VIEW].

• G: General Audience

• PG: Parental Guidance suggested.

• PG-13: Unsuitable for children under 13

• R: Restricted; under 17 requires

accompanying parent or adult

guardian

• NC-17: No one under 17 admitted

• X: Mature audience only

PICTURE

CHANNEL SET

LANGUAGE [ENGLISH]

ESPAÑOL

FRANÇAIS

V-CHIP SET UP

CAPTION [OFF]

TV RATING

MPAA RATING

TV-Y

[VIEW]

TV-Y7 ( )

[VIEW]

TV-G

[VIEW]

TV-PG

( )

[VIEW]

TV-14

( )

[VIEW]

TV-MA ( )

[VIEW]

- 19 - EN

0C28

•

When you select the rating category and turn it

[BLOCK], the higher rating will turn [BLOCK]

automatically. Also, the lower rating will turn

[VIEW] automatically.

•

When you turn "TV-Y" to [BLOCK] or [VIEW],

the all ratings will turn to [BLOCK] or [VIEW]

automatically.

•

When you turn "TV-MA" to [VIEW], the all rat-

ings will turn to [VIEW] automatically.

When you select TV-Y7, TV-PG, TV-14, or TV-MA

and you press the Arrow B button, the sub-ratings

will appear on the TV screen.

If you select the rating category (example: TV-PG)

and turn it [BLOCK] or [VIEW], the sub-ratings

(example: V for Violence) will turn [BLOCK] or

[VIEW] automatically.

You can set the sub-ratings to [BLOCK] or [VIEW]

individually when the rating category is set to

[BLOCK]. To set the sub-ratings individually, follow

the steps below.

•

When you select [TV-Y7]:

Press the Arrow K or L button

to select "FV" (Fantasy

Violence). Then, press the Arrow

B button to select [BLOCK] or

[VIEW].

•

When you select [TV-PG],

[TV-14] or [TV-MA]:

Press the Arrow K or L button

to select "D"(Suggestive

Dialog), "L"(Coarse Language),

"S"(Sexual Situation), or

"V"(Violence). Then, press the

Arrow B button to select [BLOCK] or [VIEW].

NOTE: When you select [TV-MA], "D" does not

appear on the TV screen.

•

The sub-ratings which set to [BLOCK] appears

next to the rating category in the TV RATING

menu.

Press the MENU button to exit the menu.

• TV-Y: Appropriate for all children

• TV-Y7: Appropriate for children seven and

older

• TV-G: General Audience

• TV-PG: Parental Guidance suggested.

• TV-14: Unsuitable for children under 14

• TV-MA: Mature audience only

TV-Y7

[BLOCK]

TV-PG

[BLOCK]

TV-Y

[VIEW]

TV-Y7 (

)

[VIEW]

TV-G

[BLOCK]

TV-PG

(DLSV)

[BLOCK]

TV-14

(DLSV)

[BLOCK]

TV-MA (

LSV)

[BLOCK]

ABOUT THE DISCS

- 20 - EN

0C28

PLAYABLE DISCS

The following discs can be played back on this

TV/DVD.

This player conforms to the NTSC color system. You

cannot play discs recorded in other color systems

such as PAL or SECAM.

•

Some discs include region codes as shown below.

•

The number inside the symbol refers to a region of

the world, and a disc encoded in a specific region

format can only be played back on TV/DVD with

the same region code.

The following discs cannot be played back on this

TV/DVD.

•

DVD with region codes other than 1 or ALL.

•

DVD-ROM

•

DVD-R/DVD-RAM

(Never play back, otherwise malfunction may

result.)

•

CD-ROM

•

VSD

•

CDV

(Only plays back the audio part.)

•

CD-G

(Only plays back the sound.)

•

CD-R

(Never play back, otherwise malfunction may

result.)

•

CD-I

(Never play back, otherwise malfunction may

result.)

•

Photo CD

(Never play back, otherwise malfunction may

result.)

•

Video CD

(Never play back, otherwise malfunction may

result.)

Any other discs without compatibility indications

DVD

Video

12 cm

Approx. 4 h

(single-sided)

Approx. 8 h

(double-sided)

Approx. 80 min

(single-sided)

Approx. 160 min

(double-sided)

20 min

8 cm

(singles)

Logo

Maximum

Playback Time

ContentsDisc Type

Sound

and

Pictures

Audio

Disc Size

Sound

74 min

DISC TYPES

[DVD]

Data on a DVD is divided into sections called

"titles", and then into subsections called "chapters",

each of which is given a title or chapter number.

Playback conditions are preset on some DVD video

discs, and these playback conditions take priority

over user operations on this player. If a function you

selected do not run as desired, refer to the manual

accompanying the disc.

[AUDIO CD]

Data on an audio CD is divided into sections called

"tracks", each of which is given a track number.

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2Chapter 3 Chapter 4

Example

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

SYMBOLS USED IN THIS MANUAL

The following symbols appear below some head-

ings and in some notes in this manual, with the

following meanings.

Description refers to playback of DVD video discs.

Description refers to playback of audio CDs.

DVD

DVD SECTION

- 21 - EN

0C28

PLAYING A DISC

PLAYING A DVD VIDEO

OR AN AUDIO CD

1 Press the OPEN/CLOSE button.

•

The disc loading tray will open.

2 Place a disc into the tray.

•

Make sure the disc is sitting properly in the correct

recess, with the label side up.

3 Press the PLAY button.

•

The tray will close automatically, and playback

will then start from the first chapter or track of the

disc. You need to press the PLAY button only when

the tray has been closed by pressing the

OPEN/CLOSE button.

•

When you play back the DVD which a title menu

is recorded, the menu may appear on the screen. In

this case, refer to "USING THE TITLE MENU".

4 Press the STOP button to stop play.

NOTES:

•

A "prohibited icon" may appear

at the bottom right on the TV

screen during operation, warning

that a prohibited operation has

been encountered by the

TV/DVD or the disc.

•

If a disc is dirty or has scratches, the pictures may

appear distorted and the playback operation may

stop. In such cases, clean the disc and unplug the

power cord and then plug it again before resuming

playback.

•

With DVDs that use some titles for playback pro-

gram signals, playback may start from the second

title, or it may skip these titles.

•

The DVD functions are active only in the DVD

mode.

•

To run the DVD player, press the PLAY or

OPEN/CLOSE button.

DVD CD

USING THE DVD MENUS

DVD

Some DVDs contain their own menus, such as a

guidance menu which describes the contents of the

disc or a selection menu for sound, language and

other customized settings.

1 Press the MENU button.

•

The DVD menu will appear.

2 Select the desired title.

•

Press the Arrow buttons (L/K/B/s) to change the

setting, and then press the ENTER button.

3 Playback will start from the selected title.

Getting started

Turn on the power of amplifier and any other compo-

nents which are connected to the TV/DVD. (Change

the input system to suit the TV/DVD, and check that

the sound volume is correct.)

2 Press the POWER button.

•

The power will turn on.

3 Press the SELECT button on the remote con-

trol until "DVD" appears on the screen.

Then press the DVD button.

- 22 - EN

0C28

USING THE TITLE MENU

With a DVD containing a title menu, you can select

desired titles from the menu.

1 Press the TITLE button.

•

The title menu will appear.

2 Select the desired title.

•

Press the Arrow buttons (L/K/B/s) to change the

setting, and then press the ENTER button.

CALLING UP A MENU SCREEN DUR-

ING PLAYBACK

For DVDs

•

Press the MENU button to call up the DVD menu.

•

Press the TITLE button to call up the title menu.

NOTE:

•

Contents of menus and corresponding menu opera-

tions may vary between discs. Refer to the manual

accompanying the disc for details.

DVD

PAUSING PLAYBACK OR

DISPLAYING A STILL PICTURE

DVD CD

1 Press the PAUSE button during playback.

•

Playback will pause, with sound

muted.

2 Press the PLAY button to resume playback.

PAUSE

PLAY

RESUMING PLAYBACK FROM

THE POINT WHERE

PLAYBACK STOPPED

DVD

1 Press the STOP button during playback.

•

Playback will stop, and "STOP"

will appear at the top-right of the

screen and then "MEMO ON" at

the top-left.

2 Press the PLAY button. Playback will start

from the point where the previous playback

session was stopped.

NOTES:

•

The resume function can be reset by pressing the

STOP button twice or by opening the disc loading

tray.

•

The resume function is not available with audio

CDs.

MEMO ON

PLAY

STEPPING THROUGH FRAMES

DVD

1 Press the PAUSE button while playback is

paused.

•

The next picture frame is dis-

played with sound muted each

time the button is pressed.

2 Press the PLAY button to resume playback.

PAUSE

PLAY

- 23 - EN

0C28

1 Press the FWD

or REV

button during

playback. (The sound for DVD is muted.)

•

For DVDs, pressing the FWD g or REV h

button cycles the playback speed in three steps.

•

For audio CDs, the playback speed is fixed.

2 Press the PLAY button to return to normal

playback speed.

FAST FORWARD/REVERSE

DVD CD

Ex2

Ex8

Ex32

Dx8

Dx32

Dx2

REV Button Button

FWD

1 Press the FWD

button while playback is

paused. (Sound remains muted.)

•

Slow motion mode will be activated.

•

Pressing the FWD g button cycles the playback

speed in three steps. Select an appropriate speed

while referring to the speed indication on the

screen.

2 Press the PLAY button to return to normal

playback speed.

NOTES:

•

Slow playback is not available with audio CDs.

•

The reverse of slow playback is not available.

SLOW MOTION

DVD

1/16

1/8

1/2

Button

FWD

1 Press the number buttons to enter the desired

track number.

•

The selected track will be located, and playback

will start.

You can also press the SEARCH MODE button, use

the number or K/L buttons to enter the track number,

and then press the PLAY button.

Pressing the SEARCH MODE but-

ton during playback causes the cur-

rent track number to be displayed in

square brackets.

SEARCH/TRACK

TOTAL TRACKS: 07

TRACK [ 6 ]

Start Exit

TRICKS WITH THE SKIP BUTTONS

(H, G)

If the SKIP button G is pressed during playback

or while playback is paused, the current track is

skipped and the next track is played. When the

SKIP button H is pressed once, the top of the cur-

rent track is located for replaying. When the SKIP

button H is pressed again while playback is

paused, the previous track is located. Each time the

SKIP button H is pressed while playback is

paused, the disc is searched backward track by

track. Once playback has started, pressing the SKIP

button H locates the top of the current track.

STARTING FROM A DESIRED

TIME COUNT

DVD CD

1 Press the SEARCH MODE

button.

•

Press the button three times for

DVDs or two times for audio

CDs.

2 Press the number buttons to set the desired

time count.

•

Example: 1 hour, 23 minutes and

30 seconds

1→+10→+10→3→

+10→+10→+10→0

•

To enter 0 (zero), press the num-

ber 0 (zero) button or press the B button.

3 Press the PLAY button. Playback will then

start from the set time count.

NOTES:

•

Playback from a desired time count is not available

with some discs.

•

Specific time playback is not available with some

discs or if the unit is in stop mode.

STARTING FROM A DESIRED

TRACK

SEARCH/TIME

TOTAL TIME 1h23m45s

TIME [ _h__m__s ]

Start Exit

SEARCH/TIME

TOTAL TIME: 1h23m45s

TIME [1h23m30s]

Start Exit

- 24 - EN

0C28

PLAYING FROM A DESIRED

TITLE OR CHAPTER

•

Press the number buttons to enter the desired chap-

ter number during playback. The selected chapter

will be located within the current title and then

played back.

•

Title search starts when any number button is

pressed during stop mode.

You can also press the SEARCH MODE button, use

the number or K/L buttons to enter the chapter num-

ber, and then press the PLAY button.

•

For title search, call up the chap-

ter search screen, press the

SEARCH MODE button, and

then operate in the same manner

as above.

Pressing the SEARCH MODE but-

ton during playback causes the cur-

rent chapter or title number to be

displayed in square brackets.

NOTE:

Playback from a desired title or chapter is not avail-

able with some DVDs.

DVD

SEARCH/CHAPTER

TOTAL CHAPTERS: 027

CHAPTER [ 15 ]

Start Exit

SEARCH/TITLE

TOTAL TITLES: 07

TITLE [ 5 ]

Start Exit

RANDOM (Audio CD)

1 Press the MODE button in stop mode.

•

The program setting menu screen will appear.

2 Press the MODE button again.

3 Press the PLAY button. Random playback will

then start.

NOTE:

•

Program playback is not available during random

playback.

RANDOM

Start Exit

1 Press the REPEAT button.

For DVDs

•

A single title or chapter is played back repeatedly.

•

Pressing the REPEAT button cycles the display on

the screen as follows.

•

If normal playback is performed after REPEAT

CHAPTER has been selected without any chapter

number entered, the first chapter is played back

repeatedly. If the chapter number is changed using

the number buttons or the SKIP buttons (HG)

during playback, the newly selected chapter is

played back repeatedly.

For audio CDs

•

The whole disc or a single track is played back

repeatedly.

•

Pressing the REPEAT button cycles the display on

the screen through REPEAT TRACK, REPEAT

ALL and REPEAT OFF.

•

If normal playback is performed after REPEAT

TRACK has been selected without any track num-

ber entered, the first track will be played back

repeatedly. If the track number is changed using

the number buttons or the SKIP buttons (HG)

during playback, the newly selected track is played

back repeatedly.

NOTE:

•

Repeat playback is not available with some discs

REPEAT

DVD CD

REPEAT

[CHAPTER]

REPEAT

[TITLE]

REPEAT

[OFF]

The current chapter is

played back repeatedly.

The current title is

played back repeatedly.

No repeat playback.

REPEAT

[TRACK]

REPEAT

[OFF]

REPEAT

[ALL]

The whole disc is

played back repeatedly.

The current track is

played back repeatedly.

No repeat playback.

If the REPEAT button is pressed during program

playback, that program is played back repeatedly.

- 25 - EN

0C28

You can define a section to be played back repeatedly.

1 Press the A-B REPEAT button during play-

back.

•

The starting point (A) will then

be selected.

2 Press the A-B REPEAT button again at the

end point (B) of the desired section.

•

The selected section will be

played back repeatedly.

3 To exit A-B repeat playback, press the A-B

REPEAT button and set it to OFF.

NOTES:

•

If B is selected at a point which is earlier than

point A, the previous setting of A is canceled and

the point selected as B will become the setting for

•

With DVDs, the A-B repeat section can be set only

within the current title.

•

With audio CDs, the A-B repeat section can be set

across different tracks.

•

A-B repeat is not available with some scenes in

DVD.

A-B REPEAT

DVD CD

REPEAT

[ A - ]

REPEAT

[ A - B ]

REPEAT

[ OFF ]

1 Press the MODE button in stop mode.

•

The program screen will appear.

2 Press the number or

buttons to enter the

desired track numbers, and then press the

ENTER button to select the settings.

•

The total playback time for the

selected tracks will appear on the

TOTAL line.

3 Press the PLAY button.

•

Playback will start in the programmed order.

•

The contents of the program are retained after the

program playback ends.

NOTES:

•

Addition or confirmation of programs is not possi-

ble during program playback. You must stop the

current playback before such operations can be car-

ried out.

•

Press the CLEAR button to cancel a program. The

most recently entered program will then be deleted.

•

Up to 20 programs can be stored at any time.

•

Numbers which exceed the number of tracks on the

disc in the tray are not accepted.

•

Playback from a desired track and random play-

back are not available during program playback.

•

Program settings are cleared when the power is

turned off or the disc loading tray is opened.

PROGRAM (Audio CD)

PROGRAM

T [ ] / 18 TOTAL 0h 00m 00s

Start, Delete Exit

PROGRAM

T [12 ] / 14 TOTAL 0h 27m 46s

01: 02

02: 04

03: 06

04: 09

05: 01

06: 03

07: 05

08: 07

09: 13

10: 08

11: 12

12: 14

13: 10

14: 11

Start, Delete Exit

PROGRAM

T [ ] / 14 TOTAL 0h 27m 46s

01: 09

02: 03

03: 04

04: 07

05: 01

06: 02

07: 12

08: 10

09: 13

10: 08

11: 01

12: 14

13: 10

14: 11

Start, Delete Exit

SETTINGS

- 26 - EN

0C28

The TV/DVD has a function which allows you to

select the desired audio language and sound mode.

For DVDs

Press the AUDIO button during playback, and then

press the

buttons to select the desired audio

language.

•

The audio language can be changed if multiple lan-

guages are recorded on the DVD being played.

For audio CDs

Press the AUDIO button during playback.

•

Pressing the K/L buttons cycles the sound mode

through STEREO, L-CH and R-CH.

CHANGING THE AUDIO

LANGUAGE OR SOUND MODE

DVD CD

NOTES:

•

Pressing the K/L buttons may not work on some

DVDs with multiple audio languages (e.g. DVDs

which allow audio language setting on the disc

menu). Operation varies between discs, so refer to

the manual accompanying the disc.

•

If a desired language is not shown after pressing

the K/L buttons several times, the disc does not

have an audio source in that language.

•

The audio language resets to the one which has

been selected in the setup mode, every time the

power is turned on or discs are replaced. If that lan-

guage is not available on a disc, a language defined

by the disc is selected.

•

The screen display will disappear after about 15

seconds.

•

If you use DIGITAL AUDIO OUT jack, the sound

mode of audio CDs can not be changed.

AUDIO 1

E N G

AUDIO 2

AUDIO 8

HELLO

Bon jour

Only the right channel is active.

AUDIO

C H

Both right and left channels

are active (stereo).

AUDIO

E R

Only the left channel is active.

AUDIO

C H

- 27 - EN

0C28

The TV/DVD has a function which allows you to

select the desired language for subtitles.

Press the SUBTITLE button during playback, and

then press the

buttons to select the desired

subtitle language.

•

The subtitle language can be changed if the subti-

tles are recorded in multiple languages on the DVD

being played.

•

The subtitle language cannot be changed if the sub-

titles are recorded in a single language on the DVD

being played.

•

Pressing the K/L buttons cycles the subtitle lan-

guage from SUBTITLE 1, SUBTITLE 2 and all

the languages recorded through to OFF.

NOTES:

•

Some discs allow subtitle language setting on the

disc menu. (Operation varies between discs, so

refer to the manual accompanying the disc.)

•

If the desired language is not shown after pressing

the K /L buttons several times, the disc does not

have subtitles in that language.

•

The subtitle language resets to the one which has

been selected in the setup mode, every time the

power is turned on or discs are replaced. If that

language is not available on a disc, a language

defined by the disc is selected.

•

It may take time to display the subtitles in the

selected language.

•

The screen display will disappear after about 15

seconds.

CHANGING THE SUBTITLE

LANGUAGE

DVD

Subtitle 1

No subtitles

Subtitle 2

SUBTITLE 1

E N G

SUBTITLE 2

F R E

SUBTITLE 0

O F F

HELLO

Bon jour

The TV/DVD has a function which allows you to

select the desired camera angle.

1 Press the ANGLE button during playback.

•

If the disc contains sequences recorded from differ-

ent camera angles, the angle icon ( ) will appear

at the bottom-right of the screen. You can change

the camera angle when the icon appears on the

screen.

•

The camera angle cannot be changed if the disc

does not contain sequences recorded from different

camera angles.

2 Press the

buttons while the angle num-

ber is shown on the screen.

NOTE:

•

The screen display will disappear after about 15

seconds.

CHANGING THE CAMERA

ANGLE (Multi-Angle Pictures)

DVD

ANGLE [ 1 ]

Angle 1 (default)

Angle 2

Angle 8

ANGLE [ 2 ]

ANGLE [ 8 ]

- 28 - EN

0C28

You can check the information about the disc by

pressing the DISPLAY button on the remote control.

For DVDs

Press the DISPLAY button.

•

Pressing the DISPLAY button cycles the display on

the screen.

NOTE:

•

DOLBY DIGITAL 5.1 Channel is displayed as

"DOLBY DIGITAL 6CH".

For audio CDs

Press the DISPLAY button.

•

Pressing the DISPLAY button toggles the display

on the screen.

CHANGING THE ON-SCREEN

DISPLAY

TITLE : 01/04

TIME 0h10m25s

REMAIN 0h05m25s

CHAPTER : 001/010

TIME 0h02m25s

REMAIN 0h01m31s

AUDIO : 1.ENGLISH

DOLBY DIGITAL

6CH

SUBTITLE : 2.FRENCH

ANGLE : 8/8

VIRTUAL 3D

• Current title number / total number of titles.

• Elapsed time of the current title.

• Remaining time of the current title.

• Current chapter number / total number of chapters

in the current title.

• Elapsed time of the current chapter.

• Remaining time of the current chapter.

• Current language for the sound.

• Current audio format.

• Current language for the subtitles.

• Selected angle / total number of angles.

• VIRTUAL 3D setting(ON/OFF).

No display

DVD CD

TRACK : 01/04

TIME 0h05m25s

REMAIN 0h01m31s

PROGRAM

• Current track number / total track number.

• Elapsed time of the current track.

• Remaining time of the current track.

• Current play mode.

No display

- 29 - EN

0C28

CHANGING THE SETUP ITEMS

1 Press the SETUP button.

•

The setup screen appears.

2 Press the

or number buttons to select

LANGUAGE, and then press the ENTER but-

ton.

3 Press the

or number buttons to select an

item, and then press the ENTER button.

4 Press the

or number buttons to select a

desired item, and then press the ENTER but-

ton.

•

If OTHER is selected on the AUDIO, SUBTITLE

or DISC MENU setting screen, the COUNTRY

CODE setting screen will appear. Press the number

buttons to enter the desired language (country)

code while referring to the list on page 33, and then

press the ENTER button.

5 Press the SETUP button.

•

The setup mode will be canceled and the ordinary

screen will appear.

NOTES:

•

If the automatically selected language in "AUTO"

for subtitle is same as the selected language for

"AUDIO", the subtitle will not be shown.

•

If the number buttons are used in steps 2 to 4, the

settings are immediately selected. (You do not need

to press the ENTER button.)

•

Language Setting for AUDIO and SUBTITLE is

not available with some discs. Then use the

AUDIO and SUBTITLE button. Details are on

pages 26 and 27.

•

An on-screen display language must be selected

each for the TV mode and DVD mode.

LANGUAGE SETTINGS

SETUP

1. LANGUAGE

2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter / Exit

SETUP/LANGUAGE

1. AUDIO [ENG]

2. SUBTITLE [AUTO]

3. DISC MENU [ENG]

4. PLAYER MENU [ENG]

Enter, Back Exit

SETUP/LANGUAGE

AUDIO

1. ORIGINAL

2. ENGLISH

3. SPANISH

4. FRENCH

5. OTHER

• The original language of each disc will be selected.

• Voice is played back in English.

• Voice is played back in Spanish.

• Voice is played back in French.

• You can select other languages for audio playback.

Enter, Back Exit

•

Subtitles are shown in the automatically selected

language

• Subtitles are shown in English.

• Subtitles are shown in Spanish.

• Subtitles are shown in French.

• You can select other languages for subtitles.

SETUP/LANGUAGE

SUBTITLE

1. AUTO

2. ENGLISH

3. SPANISH

4. FRENCH

5. OTHER

Enter, Back Exit

SETUP/LANGUAGE

DISC MENU

1. AUTO

2. ENGLISH

3. SPANISH

4. FRENCH

5. OTHER

• The disc menu is shown in the automatically

selected language.

• The disc menu appears in English.

• The disc menu appears in Spanish.

• The disc menu appears in French.

•

You can select other languages for the disc menu

Enter, Back Exit

SETUP/LANGUAGE

PLAYER MENU

1. ENGLISH

2. SPANISH

3. FRENCH

• The on-screen display appears in English.

• The on-screen display appears in Spanish.

• The on-screen display appears in French.

Enter, Back Exit

SETUP/LANGUAGE

COUNTRY CODE

[ _ _ _ _ ]

Enter, Back Exit

DVD

- 30 - EN

0C28

1 Press the SETUP button.

•

The setup screen will appear.

2 Press the

or number buttons to select

VIDEO, and then press the ENTER button.

3 Press the

or number buttons to select an

item, and then press the ENTER button.

4 Press the

or number buttons to select the

desired item, and then press the ENTER but-

ton.

5 Press the SETUP button.

•

The setup mode will be canceled and the ordinary

screen will appear.

NOTE:

•

If the number buttons are used in steps 2 to 4, the

settings are immediately selected. (You do not need

to press the ENTER button.)

VIDEO SETTINGS

SETUP

1. LANGUAGE

2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter / Exit

SETUP/VIDEO

1. TV MODE [4:3LB]

2. STILL MODE [AUTO]

Enter, Back Exit

SETUP/VIDEO

TV MODE

1. 4:3 PAN&SCAN

2. 4:3 LETTER BOX

3. 16:9 WIDE

• Full-height pictures are shown with one or both

sides trimmed.

• Wide screen (full-width) pictures are shown

with black bars at top and bottom.

• If a wide screen TV is connected.

Enter, Back Exit

SETUP/VIDEO

STILL MODE

1. AUTO

2. FIELD

3. FRAME

• AUTO is normally selected.

• If pictures are blurred in auto mode.

• For showing motionless pictures at high

resolution in still mode.

Enter, Back Exit

1 Press the SETUP button.

•

The setup screen will appear.

2 Press the

or number buttons to select

AUDIO, and then press the

ENTER button.

3 Press the

or number buttons to select an

item, and then press the ENTER button.

4 Press the

or number buttons to select the

desired item, and then press the ENTER but-

ton.

•

If PCM, DOLBY DIGITAL or DTS is selected on

the DIGITAL OUT setting screen, press the K/L or

number buttons again to select a further item, and

then press the ENTER button.

AUDIO SETTINGS

SETUP

1. LANGUAGE

2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter / Exit

SETUP/AUDIO

1. DIGITAL OUT

2. VIRTUAL 3D [OFF]

Enter, Back Exit

SETUP/AUDIO

DIGITAL OUT

1. PCM [48kHz]

2. DOLBY DIGITAL [OFF]

3. DTS [OFF]

• Sets the sample rate for playing a disc recorded

with high sound quality.

• When a Dolby Digital decoder is connected.

• When a DTS decoder is connected.

Enter, Back Exit

SETUP/AUDIO

VIRTUAL 3D

1. OFF

2. ON

• To activate the 3D effect.

Enter, Back Exit

SETUP/AUDIO

PCM

1. 48kHz

2. 96kHz

• Audio signals are converted to 48 kHz/16 bit

signals for digital output when playing a DVD

recorded with high sound quality (48 kHz/

20 bit/24 bit, 96 kHz).

• Sound is reproduced at the high quality of

96 kHz when playing a DVD recorded with high

sound quality (48 kHz/20 bit/24 bit, 96 kHz).

For 48 kHz discs or when 4:3 LETTER BOX

is selected in TV MODE, sound is reproduced

at 48 kHz

Enter, Back Exit

SETUP/AUDIO

DOLBY DIGITAL

1. OFF

2. ON

•

When a Dolby Digital decoder built-in amplifier

is used.

Enter, Back Exit

SETUP/AUDIO

DTS

1. OFF

2. ON

• When a DTS decoder built-in amplifier is used.

Enter, Back Exit

- 31 - EN

0C28

5 Press the SETUP button.

•

The setup mode will be canceled and the ordinary

screen will appear.

NOTE:

•

If the number buttons are used in steps 2 to 4, the

settings are immediately selected. (You do not need

to press the ENTER button.)

This unit employs TruSurround system

of SRS Labs, Inc. as the

VIRTUAL 3D technology.

TruSurround and the symbol are trademarks of

SRS Labs, Inc. in the United States and selected

foreign countries.

TruSurround technology is incorporated under license

from SRS Labs, Inc.

1 Press the SETUP button.

•

The setup screen will appear.

2 Press the

or number buttons to select

LOCK, and then press the ENTER button.

3 Press the number buttons to enter the 4-digit

password, and then press the ENTER button.

•

When doing this for the first time, enter any 4 dig-

its. That number will be used as the password from

the second time onward.

•

By entering the password, you

can then change the control level

and password settings.

4 Press the

or number buttons to select an

item, and then press the ENTER button.

When LEVEL is selected

•

Press the K/L buttons to select an item from

LEVEL 1 to LEVEL 8 or NONE, and then press

the ENTER button.

When CHANGE PASSWORD is selected

•

The password entry screen will be displayed and

the password which has already been set will be

cleared. The four digits entered in step 3 will then

be set as the new password.

•

The setup screen will appear.

PARENTAL LOCK

SETUP

1. LANGUAGE

2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter / Exit

• To set the control level to 1 to 8 or none.

• To cancel the current password and set a

new one on the same screen.

SETUP/LOCK

PASSWORD [ _ _ _ _ ]

1. LEVEL [LEVEL8]

2. CHANGE PASSWORD

Enter, Back

SETUP/LOCK

PASSWORD [ ]

1. LEVEL [LEVEL8]

2. CHANGE PASSWORD

Enter, Back

____

SETUP/LOCK

PARENTAL LOCK

NONE

LEVEL 8 [PLAY ALL]

LEVEL 7 [NC-17]

LEVEL 6 [R]

LEVEL 5

LEVEL 4 [PG-13]

LEVEL 3 [PG]

LEVEL 2

LEVEL 1 [G]

Enter

- 32 - EN

0C28

CONTROL LEVELS

•

Level 8

DVD software of any grade (adult/general/chil-

dren) can be played back.

•

Level 7 to 2

Only DVD software intended for general use and

children can be played back.

•

Level 1

Only DVD software intended for children can be

played back, with those intended for adult and gen-

eral use prohibited.

•

None

Parental lock is canceled.

NOTES:

•

With some DVDs, it may be difficult to find if they

are compatible with parental lock. Be sure to check

if the parental lock function operates in the way

that you have set.

•

If the number buttons are used in steps 2 to 4, the

settings are immediately selected. (You do not need

to press the ENTER button.)

•

Record the password in case you forget it.

1 Press the SETUP button.

•

The setup screen will appear.

2 Press the

or number buttons to select

OTHERS, and then press the

ENTER button.

3 Press the

or number buttons to select an

item, and then press the ENTER button.

4 Press the

or number buttons to select a

desired item, and then press the ENTER but-

ton.

5 Press the SETUP button.

•

The setup mode will be canceled and the ordinary

screen will appear.

NOTE:

•

If the number buttons are used in steps 2 to 4, the

settings are immediately selected. (You do not need

to press the ENTER button.)

OTHER SETTINGS

SETUP

1. LANGUAGE

2. VIDEO

3. AUDIO

4. LOCK

5. OTHERS

Enter / Exit

SETUP/OTHERS

1. OSD MESSAGE [ON]

2. ANGLE ICON [ON]

3. BACKGROUND [BLUE]

Enter, Back Exit

SETUP/OTHERS

OSD MESSAGE

1. ON

2. OFF

• Selects whether to display messages on the

screen.

Enter, Back Exit

[Cannot remember your password?]

Reset the setup items and enter the new password

by the following step:

•

When the TV/DVD do not run in the DVD mode,

and while pressing and holding the STOP button

on the TV/DVD, press the CHANNEL K button

on the TV/DVD.

SETUP/OTHERS

ANGLE ICON

1. ON

2. OFF

• Selects whether to display the angle icon.

Enter, Back Exit

SETUP/OTHERS

BACKGROUND

1. BLUE

2. GRAY

• Turns the background to blue.

• Turns the background to gray.

Enter, Back Exit

- 33 - EN

0C28

LANGUAGE CODE LIST

1 Afar 4747

2 Abkhazian 4748

3 Afrikaans 4752

4 Amharic 4759

5 Arabic 4764

6 Assamese 4765

7 Aymara 4771

8 Azerbaijani 4772

9 Bashkir 4847

10 Byelorussian 4851

11 Bulgarian 4853

12 Bihari 4854

13 Bislama 4855

14 Bengali;Bangla 4860

15 Tibetan 4861

16 Breton 4864

17 Catalan 4947

18 Corsican 4961

19 Czech 4965

20 Welsh 4971

21 Danish 5047

22 German (GER) 5051

23 Bhutani 5072

24 Greek 5158

25 English (ENG) 5160

26 Esperanto 5161

27 Spanish (SPA) 5165

28 Estonian 5166

29 Basque 5167

30 Persian 5247

31 Finnish 5255

32 Fiji 5256

33 Faroese 5261

34 French (FRE) 5264

35 Frisian 5271

36 Irish 5347

37 Scots Gaelic 5350

38 Galician 5358

39 Guarani 5360

40 Gujarati 5367

41 Hausa 5447

42 Hindi 5455

43 Croatian 5464

44 Hungarian 5467

45 Armenian 5471

46 Interlingua 5547

47 Interlingue 5551

48 Inupiak 5557

49 Indonesian 5560

50 Icelandic 5565

51 Italian (ITA) 5566

52 Hebrew 5569

53 Japanese (JPN) 5647

54 Yiddish 5655

55 Javanese 5669

56 Georgian 5747

57 Kazakh 5757

58 Greenlandic 5758

59 Cambodian 5759

60 Kannada 5760

61 Korean (KOR) 5761

62 Kashmiri 5765

63 Kurdish 5767

64 Kirghiz 5771

65 Latin 5847

66 Lingala 5860

67 Laothian 5861

68 Lithuanian 5866

No. Language Country code

69 Latvian;Lettish 5868

70 Malagasy 5953

71 Maori 5955

72 Macedonian 5957

73 Malayalam 5958

74 Mongolian 5960

75 Moldavian 5961

76 Marathi 5964

77 Malay 5965

78 Maltese 5966

79 Burmese 5971

80 Nauru 6047

81 Nepali 6051

82 Dutch (DUT) 6058

83 Norwegian 6061

84 Occitan 6149

85 (Afan)Oromo 6159

86 Oriya 6164

87 Panjabi 6247

88 Polish 6258

89 Pashto;Pushto 6265

90 Portuguese 6266

91 Quechua 6367

92 Rhaeto-Romance 6459

93 Kirundi 6460

94 Romanian 6461

95 Russian 6467

96 Kinyarwanda 6469

97 Sanskrit 6547

98 Sindhi 6550

99 Sangho 6553

100 Serbo-Croatian 6554

101 Singhalese 6555

102 Slovak 6557

103 Slovenian 6558

104 Samoan 6559

105 Shona 6560

106 Somali 6561

107 Albanian 6563

108 Serbian 6564

109 Siswat 6565

110 Sesotho 6566

111 Sundanese 6567

112 Swedish 6568

113 Swahili 6569

114 Tamil 6647

115 Telugu 6652

116 Tajik 6653

117 Thai 6654

118 Tigrinya 6655

119 Turkmen 6657

120 Tagalog 6658

121 Setswana 6660

122 Tonga 6661

123 Turkish 6664

124 Tsonga 6665

125 Tatar 6666

126 Twi 6669

127 Ukrainian 6757

128 Urdu 6764

129 Uzbek 6772

130 Vietnamese 6855

131 Volapuk 6861

132 Wolof 6961

133 Xhosa 7054

134 Yoruba 7161

135 Chinese (CHI) 7254

136 Zulu 7267

No. Language Country code

DVD

TROUBLESHOOTING GUIDE

Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked

possibilities. Before arranging for service, check these items. It could save your time and money.

Problem Corrective Action

Remote Control Doesn’t Work

•

Is TV/DVD plugged in?

•

Power at outlet?

•

Check batteries in Remote Control.

Bars On Screen

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

Picture Distorted or Blurred

•

Try a new channel, if OK, then possible station trouble.

•

If outside antenna is being used, check for broken wire.

Picture Rolls Vertically

•

Try a new channel, if OK, then possible station trouble.

Lines or Streaks in Picture

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

No Color

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust COLOR control.

Poor Reception on Some Channels

•

Try a new channel, if OK, then possible station trouble.

Ghosts in Picture

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

Weak Picture

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust CONTRAST & BRIGHT control.

Sound OK, Picture Poor

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

•

Adjust CONTRAST & BRIGHT control.

Picture OK, Sound Poor

•

Try a new channel, if OK, then possible station trouble.

•

Check for local interference.

No Picture or Sound

•

Try a new channel, if OK, then possible station trouble.

•

Is TV/DVD plugged in?

•

Power at outlet?

•

Is TV/DVD’S POWER button on?

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Turn off with POWER button and then turn it on after about a minute.

- 34 - EN

0C28

- 35 - EN

0C28

Closed Caption Problem Possible Remedy

My TV is showing captions • You are watching a live broadcast and spelling errors made by the

that are misspelled. • closed captioning production company may pass through uncorrected.

• A prerecorded program will not show any misspelled words because

• of the normal time available for editing the captions.

My TV will not show the text • Captions that are delayed a few seconds behind the actual dialogue

in its entirety or there is a delay of • are common for live broadcast. Most captioning production companies

what is being said. • can display a dialogue to a maximum of 220 words per minute. If a

• dialogue exceeds that rate, selective editing is used to insure that the

• captions remain up-to-date with the current TV screen dialogue.

My captions are scrambled with • Interference caused by building, power lines, thunderstorms, etc.

white boxes on the TV screen. • may cause scrambled or incomplete captions to appear.

My program guide listed a TV show

• Broadcasters may at times use a time compression process to the

as being closed captioned but none • actual program so that additional advertising time can be given.

of the captions were displayed. • Since the decoder cannot read the compressed information,

• captions will be lost.

My TV screen shows a black box • You are in the TEXT mode. Select CAPTION mode or CAPTION

on certain channels. • [OFF].

- 36 - EN

0C28

If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the

player, consulting the following checklist.

Symptom Cause Remedy

No power.

•

Loose power plug.

•

Insert the power plug firmly into the wall outlet.

The player does not

•

The remote control is not aimed

•

Aim the remote control directly at the sensor on

respond to the

•

at the sensor on the TV/DVD.

•

the TV/DVD.

remote control.

•

Obstacles present between the

•

Remove the obstacles from the signal path.

•

remote control and the sensor.

•

The remote control is too far

•

Use the remote control within 7m of

•

away from the TV/DVD.

•

the TV/DVD.

•

Dead batteries.

•

Replace the batteries.

No picture

•

Loose video connection.

•

Connect the video cables firmly.

•

Wrong disc.

•

Insert a correct video disc that plays on this

•

TV/DVD.

Disc cannot be

•

No disc.

•

Insert a disc.

played

•

Dirty disc.

•

Clean the disc.

•

Disc is placed upside down.

•

Place the disc correctly, with the label side up.

•

Parental lock is active.

•

Cancel the parental lock or change the control

•

level.

No sound

•

Loose audio connection.

•

Connect the audio cables firmly.

•

The power of the connected

•

Turn the power of the audio component on.

•

audio component is off.

•

Wrong audio output settings.

•

Correct the audio output settings.

•

Wrong input settings on the

•

Correct the input settings on the audio

•

connected audio component.

•

component.

Distorted picture

•

Immediately after playing,

•

There are some cases where pictures may be

•

press fast forward or in reverse.

•

slightly distorted, which are not a sign of a

•

malfunction.

Audio or subtitle

•

The selected language is not

•

No malfunction.

language does not

•

available for audio or subtitles

match the setup.

•

on the DVD.

The camera angle

•

The DVD does not contain

•

No malfunction.

cannot be changed.

•

sequences recorded from

•

different camera angles.

Audio or subtitle

•

The DVD does not contain

•

No malfunction.

language cannot be

•

audio source or subtitles in the

changed.

•

selected language.

"Prohibited icon"

•

That operation is prohibited by

•

No malfunction.

appears on the

•

the TV/DVD or disc.

screen, prohibiting

an operation.

NOTES:

•

Some functions are not available in specific modes, but this is not a malfunction. Read the description in

this Owner’s Manual for details on correct operations.

•

Playback from a desired track and random playback are not available during program playback.

DVD

- 37 - EN

0C28

MAINTENANCE

CABINET CLEANING

•

Wipe the front panel and other exterior surfaces of

the TV/DVD with a soft cloth immersed in luke-

warm water and wrung dry.

•

Never use a solvent or alcohol. Do not spray insec-

ticide liquid near the TV/DVD. Such chemicals

may cause damage and discoloration to the

exposed surfaces.

SERVICING

•

Should your TV/DVD become inoperative, do not

try to correct the problem by yourself. There are no

user-serviceable parts inside. Turn off, unplug the

power cord, and please call our help line at 1-800-

968-3429, to locate an Authorized Service Center.

IF THE LASER OPTICAL PICKUP UNIT IS DIRTY

•

If the player still does not perform properly when it is operated while referring to the relevant sections and to

"TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult

your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

•

Use discs which have the following logos on them.

(Optical audio digital discs.)

•

Handle the discs so that fingerprints and dust do

not adhere to the surfaces of the discs.

•

Always store the disc in its protective case when it

is not used.

DISC HANDLING

•

To clean-off, use a soft cloth.

•

Do not use a hard cloth since this will mar the disc.

•

Wipe the disc in a straight line from center to edge.

•

Never wipe with a circular motion.

•

Do not use detergent or abrasive cleaning agents.

- 38 - EN

0C28

SPECIFICATIONS

Television system: NTSC-M

TV Standard

Closed caption system: §15.119/FCC

Channel coverage:

VHF: 2 ~ 13

UHF: 14 ~ 69

CATV: 2 ~13, A ~ W,

W+1 ~ W+84,

A-5 ~ A-1, 5A

Tuning System: 181 channel

frequency synthesized

tuning system

Channel access: Direct access keyboard,

programmable

scan and up/down

Product type: DVD Player

Discs: DVD video, Audio CD

Output signal format: NTSC color

Frequency response

(out put jack)

DVD (linear sound): 20 Hz to 22 kHz

(sample rate: 48 kHz)

20 Hz to 44 kHz

(sample rate: 96 kHz)

CD: 20 Hz to 20 kHz

Signal-to-noise ratio

(S/N ratio)(out put jack)

CD: 100 dB (EIAJ)

Dynamic range

(out put jack)

DVD (linear sound): 85 dB

CD: 84 dB (EIAJ)

Total distortion factor

CD: 0.07% (EIAJ)

Wow and flutter: Below the measurement

limitation (+/-0.001%

W PEAK) (EIAJ)

•

Designs and specifications are subject to change without notice and without our legal obligation.

•

If there is a discrepancy between languages, the default language will be English.

DVD

GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS

Sound output: 2 speakers, 1W, 8 ohm

OTHER SPECIFICATIONS

Terminals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced (F-type)

Video input: RCA connector [ 1

Audio L/R input: RCA connector [ 2

Headphone: 1/8” stereo (3.5 mm)

Coaxial digital

audio output

(only DVD): One pin jack,

500m Vpp (75 ohm)

Analog audio L/R

output (only DVD): RCA connector [ 2

Remote control: Digital encoded

infrared light system

Operating

temperature: 5ºC to 40ºC

(41ºF~104ºF)

Power requirements: AC 120V, 60Hz

Power consumption

(Maximum): 75W

Picture tube: 13"

Dimensions: H:15-13/16" (402mm)

W:15-3/16" (386mm)

D:14-13/16" (376mm)

Weight: 25.4 lbs (11.5kg)

Accessories: Remote Control Unit with

2"AA"batteries

Rod Antenna

Owner’s Manual

- 39 - ES

0C28

1. Bandeja de carga del disco

2. Toma de entrada de vídeo (VIDEO)– Se conecta a la toma de

salida de vídeo de una videocámara o videograbadora.

3. Tomas de entrada de audio izquierda/derecha (AUDIO L/R)–

Se conectan a las tomas de salida de audio de una videocámara

o videograbadora.

4. Botón de alimentación (POWER)– Púlselo para conectar y

desconectar la alimentación.

5. Botones de volumen (VOLUME

/L)– Púlselos para controlar

el nivel del sonido del reproductor DVD y del televisor.

Botones de canales (CHANNEL

/L)– Púlselos para selec-

cionar los canales memorizados.

7. Ventanilla receptora de señales del mando a distancia

8. Botón de parada (STOP)– Detiene el disco.

9. Botón de rebobinado (REV)– Activa la reproducción en retro-

ceso rápido hasta un punto deseado.

10.

Botón de reproducción (PLAY)– Inicia la reproducción del

contenido del disco.

11. Botón de avance (FWD)– Activa la reproducción en avance

rápido hasta un punto deseado.

12. Botón de pausa (PAUSE)– Hace una pausa en el disco actual.

13. Botón de abrir/cerrar (OPEN/CLOSE)– Púlselo para introducir

un disco en la bandeja o para sacarlo de ella.

14.

Toma de auriculares (HEADPHONE)– Para conectar unos

auriculares (no suministrados) y escuchar en privado.

15. Botón del televisor (TV)– Púlselo para controlar el televisor.

16. Botón numerados (NUMBER)–

Modo del televisor:

Pulse dos dígitos para acceder directamente al canal deseado.

No se olvide de pulsar "0" antes de introducir un canal de un

solo dígito.

Botón +100–

Púlselo para seleccionar canales de televisión por cable con un

número igual o superior al 100.

Modo del reproductor DVD:

Púlselo para introducir el número deseado.

Botón +10–

Púlselo para introducir números iguales o superiores al 10.

17.

Botón del temporizador para dormir (SLEEP)– Pulse el botón

SLEEP para visualizar el temporizador para dormir y activar la

función. La hora de apagado puede determinarse mediante el

número de veces que usted pulse el botón (0, 10, 20, 30, ... 90,

0 minutos).

18. Botones de salto (SKIP)– Para saltar capítulo o pistas hasta un

punto deseado.

19. Botón de modo (MODE)– Activa el modo de reproducción de

programas o de reproducción aleatoria.

20. Botón de preparación (SETUP)– Púlselo para introducir el

modo de preparación o para cambiar ítems de preparación.

21.

Botón de título (TITLE)– Visualiza el menú de títulos.

22. Botón de cancelar (CLEAR)– Cancela un ajuste.

23. Botón del visualizador (DISPLAY)–

Modo del televisor:

Púlselo para visualizar el número del canal en la pantalla. Si lo

presiona de nuevo, el número del canal desaparecerá.

Modo del reproductor DVD:

Visualiza el estado actual en la pantalla del televisor con fines

de comprobación.

24.

Botón de modo búsqueda (SEARCH MODE)– Púlselo para

localizar el punto deseado.

25. Botón de audio (AUDIO)– Púlselo para seleccionar el modo de

sonido o idioma de audio deseado.

26. Botón de subtítulo (SUBTITLE)– Púlselo para seleccionar un

idioma de subtítulos deseado.

27.

Botón de repetición (REPEAT)– Repita la reproducción del

disco, título, capítulo o pista actual.

28. Botón de ángulo (ANGLE)– Púlselo para cambiar el ángulo de

la cámara y ver la escena reproduciéndose desde un ángulo

diferente.

29. Botón de repetición A-B (A-B REPEAT)– Repite la reproduc-

ción de una sección seleccionada.

30.

Botón de retorno (RETURN)– Se utiliza para volver a la

operación anterior.

31. Botón de aceptación (ENTER)– Púlselo para aceptar un ajuste.

32. Botones de flechas–

Modo del televisor:

Púlselo para seleccionar un modo de ajuste en los menús que

aparecen en la pantalla del televisor.

Púlselo para seleccionar o ajustar desde un menú particular.

Modo del reproductor DVD:

Se utiliza para hacer ajustes mientras se observa la visual-

ización en la pantalla del televisor.

33. Botón de menú (MENU)– Visualiza los menús del reproductor

DVD y del televisor.

34.

Botón de selección (SELECT)– Púlselo para cambiar al modo

del televisor, al modo de entrada exterior o al modo del repro-

ductor DVD.

35. Botón de silenciamiento (MUTE)– Púlselo para apagar el

sonido de un programa de televisión. (La visualización del

nivel del sonido cambia de AZUL CLARO a ROJO CLARO.)

Pulse de nuevo este botón o pulse el botón VOL K o L para

reponer el sonido.

36. Botón DVD– Púlselo para controlar el reproductor DVD.

37.

Cable de alimentación– Conéctelo a una toma de CA estándar

(120 V/60 Hz).

NOTA: Retire el cable de alimentación del gancho para impedir

que se rompa algún hilo conductor antes de conectar el cable a

una toma de CA.

38. Toma de salida de audio digital COAXIAL– Conéctela a otro

amplificador o descodificador.

39. Toma de salida de audio izquierda/derecha (AUDIO L/R)–

Conéctela a otro amplificador o descodificador.

40.

Toma de entrada de antena (ANT.)– Conéctela a una antena,

sistema de televisión por cable o sistema de televisión por

satélite.

CONEXIONES DE ANTENA/TELEVISIÓN

POR CABLE

ANTENA COMBINADA DE VHF/UHF

La antena de varilla de VHF/UHF (suministrada) puede desmon-

tarse. Inserte el vástago de la antena en el agujero de la parte supe-

rior trasera del televisor/reproductor DVD. Conecte la antena de

varilla de VHF/UHF o la antena combinada de VHF/UHF en el

terminal ANT. del televisor/reproductor DVD como se muestra en

el diagrama de abajo. Para obtener la mejor recepción, extienda

completamente la antena de varilla de VHF/UHF y haga los

ajustes necesarios. (Evite tocar la sección superior cuando haga el

ajuste.)

CONTROLES DE OPERACIÓN Y

SUS FUNCIONES

Consulte las figuras 1-3 de las páginas 8 y 9.

•

Para utilizarlo como mando a distancia del televisor, pulse el

botón TV del mando a distancia después de seleccionar el

modo del televisor. Los botones de control del televisor se

indican en color azul o blanco.

•

Para utilizarlo como mando a distancia del reproductor DVD,

pulse el botón DVD del mando a distancia después de selec-

cionar el modo del reproductor DVD. Los botones de control

del reproductor DVD se indican en color amarillo o blanco.

PREPARACIÓN PARA LA UTILIZACIÓN

- 40 - ES

0C28

NOTA: Antes de conectar la antena de varilla en el terminal de

antena, compruebe que la clavija no esté doblada. Si lo está,

enderécela como se muestra en la ilustración, y luego conecte la

clavija en el terminal de la antena.

NOTA: La conexión de una antena interior tal vez no ofrezca

siempre una recepción de televisión aceptable.

ANTENAS SEPARADAS DE VHF/UHF

En algunas zonas será necesario utilizar una antena exterior.

TELEVISIÓN POR CABLE SIN CAJA DE

CONVERSIÓN/DESCODIFICADOR

Utilice esta conexión si su sistema de televisión por cable se

conecta directamente a su televisor/reproductor DVD sin caja de

conversión.

TELEVISIÓN POR CABLE CON CAJA DE

CONVERSIÓN/DESCODIFICADOR O CAJA DE TELE-

VISIÓN POR SATÉLITE

Si sus servicio de televisión por cable le suministra una caja de

conversión, o si usted utiliza un sistema de televisión por satélite,

usted podrá utilizar la conexión básica mostrada aquí.

INSTALACIÓN DE LAS PILAS

1) Abra la cubierta del compartimiento de las pilas presionando la

cubierta del mando a distancia en el sentido de la flecha.

2) Inserte 2 pilas "AA" en el compartimiento de las pilas, en el

sentido indicado por las

marcas de polaridad (+/-).

3) Vuelva a poner la cubierta.

CONEXIÓN A TOMAS DE ENTRADA

EXTERIOR

Cuando vea un programa grabado en otra fuente (videograbadora o

videocámara), utilice las tomas de entrada de audio/vídeo de la

parte delantera del televisor/reproductor DVD.

Conecte las tomas de salida de audio/vídeo de otra fuente a las

tomas AUDIO L/R y VIDEO de este televisor/reproductor DVD.

Y luego pulse el botón SELECT hasta que aparezca "AUX" en la

pantalla.

NOTA:

•

Cuando conecte una videograbadora mono (otra fuente) a este

televisor/reproductor DVD, conecte la toma de salida de audio

de la videograbadora mono (otra fuente) a la toma AUDIO L de

este televisor/reproductor DVD. El audio saldrá por los canales

L y R de la misma forma.

CONEXIÓN A UN SISTEMA ESTÉREO

(Para DVD)

NOTAS:

•

Asegúrese de desconectar la alimentación de todos los compo-

nentes del sistema antes de hacer conexiones a otro compo-

nente.

•

Consulte también los manuales de instrucciones del sistema

estéreo y de otros componentes que vayan a ser conectados al

televisor/reproductor DVD.

CONEXIÓN A UN AMPLIFICADOR

EQUIPADO CON TOMAS DE ENTRADA

DIGITAL, PLATINA MD O PLATINA DAT

(Para DVD)

Utilice cables de audio digital coaxial (de venta en el comercio)

para hacer las conexiones de audio.

NOTAS:

•

La fuente de audio de un disco del formato de sonido ambiental

Dolby Digital de 5,1 canales no puede grabarse como sonido

digital por una platina MD o DAT.

•

Asegúrese de desconectar la alimentación de todos los compo-

nentes del sistema antes de hacer conexiones a otro compo-

nente.

•

Consulte también los manuales de los componentes que vayan a

ser conectados al televisor/reproductor DVD.

•

En el modo de preparación, ponga DOLBY DIGITAL y DTS en

APDO. para la salida de audio. Hacer la reproducción en un

televisor/reproductor DVD utilizando ajustes incorrectos puede

generar ruidos, y también puede estropear los altavoces.

•

Cuando ponga DOLBY DIGITAL en APDO. y 3D VIRTUAL

en ENC. para la salida de audio en el modo de preparación y

seleccione la fuente de audio en un formato de sonido ambiental

Dolby Digital de 5,1 canales, el audio se silenciará.

CONEXIÓN A UN DESCODIFICADOR

DOLBY DIGITAL O A UN DESCODIFI-

CADOR DTS (Para DVD)

Si utiliza este televisor/reproductor DVD para reproducir en el for-

mato de sonido ambiental Dolby Digital de 5,1 canales o en el for-

mato de sonido ambiental DTS, el televisor/reproductor DVD dará

salida al flujo de datos Dolby Digital o DTS desde su toma de sali-

da de audio digital COAXIAL. Conectando el reproductor a un

descodificador Dolby Digital o DTS, usted podrá disfrutar de un

ambiente más convincente y real, con un sonido ambiental potente

y de alta calidad de tipo profesional como el que puede oírse en

los cines.

Utilice los cables digitales coaxiales de audio (de venta en el com-

ercio) para hacer las conexiones de audio.

NOTAS:

•

Asegúrese de desconectar la alimentación de todos los compo-

nentes del sistema antes de hacer conexiones a otro compo-

nente.

•

Consulte también los manuales de los componentes que vayan a

ser conectados al televisor/reproductor DVD.

•

Si hace la conexión a un descodificador Dolby Digital, en el

modo de preparación, ponga DOLBY DIGITAL en ENC. para

la salida de audio.

•

Si hace la conexión a un descodificador DTS, en el modo de

Clavija doblada

Cable Clavija

(Necesita ser enderezada)

(Clavija derecha)

Consulte la figura 4 de la página 10.

Consulte la figura 5 de la página 10.

Consulte la figura 6 de la página 11.

Consulte la figura 7 de la página 11.

Aviso a los instaladores de sistemas CATV:

Este aviso se incluye para que los instaladores de sistemas

CATV tenga en cuenta el Artículo 820-40 del NEC, que pro-

porciona consejos para hacer una conexión apropiada a tierra y,

en particular, especifica que el cable de tierra deberá conectarse

a un sistema de puesta a tierra del edificio tan cerca del punto

de entrada del cable como sea posible.

Consulte la figura 8 de la página 12.

Consulte la figura 9 de la página 13.

Consulte la figura 10 de la página 13.

Consulte la figura 11 de la página 14.

- 41 - ES

0C28

preparación, ponga DTS en ENC. para la salida de audio.

•

A menos que haga la conexión a un descodificador Dolby

Digital o a un descodificador DTS, en el modo de preparación,

ponga DOLBY DIGITAL y DTS en APDO. para la salida de

audio. Hacer la reproducción en un televisor/reproductor DVD

utilizando ajustes incorrectos puede generar ruidos, y también

puede estropear los altavoces.

•

Cuando ponga DOLBY DIGITAL en APDO. y 3D VIRTUAL

en ENC. para la salida de audio en el modo de preparación y

seleccione la fuente de audio en un formato de sonido ambiental

Dolby Digital de 5,1 canales, el audio se silenciará.

SECCIÓN DEL TELEVISOR

Para empezar

1) Conecte el cable de alimentación a una toma de CA estándar.

NOTA: Si aparecen algunos dígitos en la esquina de la pantalla,

pulse el botón POWER sin desconectar el cable de alimentación.

2) Pulse el botón POWER para encender el televisor/reproductor

DVD.

3) Pulse el botón SELECT del mando a distancia hasta que el

número del canal o "TV" aparezca en la pantalla.

Luego pulse el botón TV.

SELECCIÓN DE IDIOMA

Si desea cambiar el idioma del menú en pantalla, siga el proced-

imiento siguiente.

1) Pulse el botón MENU para que la visualización del menú

aparezca en la pantalla del televisor.

2) Pulse el botón de flecha K o L para apuntar a "LANGUAGE".

3) Seleccione "ENGLISH" = inglés, "ESPAÑOL" o FRANÇAIS =

francés utilizando el botón de flecha B o s.

4) Pulse el botón MENU para salir del menú.

NOTA: El idioma de la visualización en pantalla deberá selec-

cionase para el modo del televisor y el modo de DVD.

PREAJUSTE DE CANALES

Para preajustar un canal o cambiar un canal preajustado, siga el

procedimiento siguiente.

1) Pulse el botón MENU para que la visualización del menú desa-

parezca de la pantalla del televisor.

2) Pulse el botón de flecha K o L para apuntar a "CANAL

PREP.". Y luego pulse el botón de flecha B.

3) Pulse el botón de flecha K o L para apuntar a "AUTOPRESE-

LEC.". Luego, pulse el botón de flecha B.

El sintonizador explora y memoriza todos los canales activos en su

área.

•

El televisor distingue entre los canales de televisión estándar y

los canales de televisión por cable.

•

Cuando termine la acción de AUTOPRESELEC., el canal mem-

orizado más baja volverá a aparecer en la pantalla.

•

Cuando pulse el botón de flecha K o L después de seleccionar

AUTOPRESELEC., el sintonizador se detendrá en los canales

memorizados solamente.

•

El televisor puede reconocer si los canales de televisión son

CATV por las condiciones de la recepción. En este caso, intente

de nuevo la acción de AUTOPRESELEC. en condiciones de

recepción fina.

[FUNCIÓN DE AGREGAR/BORRAR]

1) Pulse el botón MENU para que la visualización del menú

aparezca en la pantalla del televisor.

2) Pulse el botón de flecha K o L para apuntar a "CANAL

PREP.". Y luego pulse el botón de flecha B.

3) Pulse el botón de flecha B para seleccionar "AGREGAR/BOR-

RAR".

4) Utilice el botón de flecha K o L para seleccionar el canal que

desee memorizar o borrar de la memoria.

NOTA: La visualización volverá a la pantalla en unos 10

segundos. Realice la función de "AGREGAR/BORRAR" mien-

tras aparece la visualización en la pantalla.

•

Pulse el botón de flecha B o s para encender el número del

canal en AZUL CLARO si desea agregar el canal a la memoria.

•

Pulse el botón de flecha B o s para encender el número del

canal en ROJO CLARO si desea borrar el canal de la memoria.

5) Pulse el botón MENU para salir del menú.

SECCIÓN DEL REPRODUCTOR D

Para empezar

1) Conecte la alimentación del amplificador o de cualquier otro

componente que esté conectado al televisor/reproductor DVD.

(Cambie el sistema de entrada para que se adapte al

televisor/reproductor DVD, y compruebe que el volumen del

sonido sea el correcto.)

2) Pulse el botón POWER.

•

La alimentación se conectará.

3) Pulse el botón SELECT del mando a distancia hasta que "DVD"

aparezca en la pantalla. Luego pulse el botón DVD.

REPRODUCCIÓN DE UN DVD VIDEO O

UN CD DE AUDIO

1) Pulse el botón OPEN/CLOSE.

•

La bandeja del disco se abrirá.

2) Ponga un disco en la bandeja.

•

Asegúrese de que el disco esté bien colocado en la bandeja, con

la cara de la etiqueta hacia arriba.

3) Pulse el botón PLAY.

•

La bandeja se cerrará automáticamente, y la reproducción

empezará desde el primer capítulo o la primera pista del disco.

Usted necesitará pulsar PLAY sólo cuando la bandeja haya sido

cerrada pulsando el botón OPEN/CLOSE.

•

Cuando reproduzca un DVD que tenga grabado un menú de

títulos, el menú podrá aparecer en la pantalla. En este caso, con-

sulte "UTILIZACIÓN DEL MENÚ DE TÍTULOS".

4) Pulse el botón STOP para detener la reproducción.

NOTAS:

•

Durante la operación puede aparecer un "icono de prohibición"

en la parte inferior derecha de la pantalla del televisor, avisán-

dole que el televisor/reproductor DVD o el disco han encontra-

do una operación prohibida.

•

Si un disco está sucio o tiene rayas, las imágenes pueden apare-

cer distorsionadas y la operación de reproducción tal vez se

detenga. En tales casos, limpie el disco y desenchufe el cable de

alimentación, y luego vuelva a conectarlo antes de reanudar la

reproducción.

•

Con DVDs que utilicen algunos títulos para reproducir señales

de programas, la reproducción tal vez empiece desde el segundo

título, o puede que omita estos títulos.

•

Las funciones relacionadas con el DVD se activan sólo en el

modo DVD.

•

Para poner en funcionamiento el reproductor DVD, pulse el

botón PLAY u OPEN/CLOSE.

Fabricado bajo licencia de Dolby Laboratories.

“Dolby” y el símbolo con una doble D son marcas

registradas de Dolby Laboratories.Trabajos confiden-

Laboratories.Todos los derechos quedan reservados.

“DTS” y “DTS Digital Out” son marcas comerciales

de Digital Theater Systems, Inc.

PREPARACIÓN PARA LA UTILIZACIÓN

REPRODUCCIÓN DE UN DISCO

DVD CD

- 42 - ES

0C28

UTILIZACIÓN DE LOS MENÚS DE DVD

Algunos DVDs tienen sus propios menús como, por ejemplo, un

menú guía que describe el contenido del disco o un menú de selec-

ción para seleccionar el sonido, el idioma y otros ajustes personal-

izados.

1) Pulse el botón MENU.

•

El menú DVD aparecerá.

2) Seleccione el título deseado.

•

Pulse los botones de las flechas (K/L/B/s) para cambiar el

ajuste, y luego pulse el botón ENTER.

3) La reproducción empezará desde el título seleccionado.

UTILIZACIÓN DEL MENÚ DE TÍTULOS

Con un DVD que tenga un menú de títulos, usted podrá selec-

cionar los títulos deseados en el menú.

1) Pulse el botón TITLE.

•

El menú de títulos aparecerá.

2) Seleccione el título deseado.

•

Pulse los botones de las flechas (K/L/B/s) para cambiar el

ajuste, y luego pulse el botón ENTER.

RECUPERACIÓN DE UNA PANTALLA DE MENÚS

DURANTE LA REPRODUCCIÓN

Para DVDs

•

Pulse el botón MENU para recuperar el menú del DVD.

•

Pulse el botón TITLE para recuperar el menú de títulos.

NOTA:

•

El contenido de los menús y las operaciones con menús corre-

spondientes pueden cambiar según los discos, Consulte el man-

ual entregado con el disco para conocer detalles.

DVD

- 43 - ES

0C28

MEMO

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as fol-

lows:

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original

retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail

purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be

required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was

attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does not apply to any product not pur-

chased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage

which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage

which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commer-

cial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY

COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT

OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS

PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL

OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MER-

CHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRE-

SENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER.

THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.

WHEN YOU ARE RETURNING THE PRODUCT FOR SERVICE TO THE FACTORY SERVICE CENTER, PLEASE CON-

TACT THE FUNAI SERVICE DEPARTMENT TO RECEIVE A R.A. (REPAIR AUTHORIZATION) NUMBER PRIOR TO

SHIPPING. ANY POSTAGE, INSURANCE AND SHIPPING COST, INCURRED IN PRESENTING OR SENDING YOUR SYLVA-

NIA PRODUCT FOR SERVICE ARE SHIPPER’S RESPONSIBILITY.

CAREFULLY PACK WITH PROPER PACKING MATERIALS, PREFERABLY IN THE ORIGINAL CARTON AND IF NEEDED

DOUBLE BOX IT.

ATTACH WRITTEN DOCUMENTATION DETAILING THE COMPLAINT, TO THE OUTSIDE OR INSIDE OF THE CAR-

TON.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF

PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT VARY FROM

STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION

WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFYANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

To locate your nearest SYLVANIAAuthorized Service Center or for general service procedure, please call 1-800-968-3429 or

write to the following:

FUNAI CORPORATION

Customer Service

100 North Street; Teterboro, NJ 07608

Tel :1-800-968-3429

Printed in China 0EMN01718

TD100UA * * * * *

Funai 6513DA Manual de usuario

Marca: Funai

Modelo: 6513DA

Categoría: Reproductores de DVD

Tipo: Manual de usuario

Este manual también es adecuado para

Descargar PDF

informe

En otros idiomas

English: Funai 6513DA User manual

Documentos relacionados

Funai SRTD420 Manual de usuario

Funai 6513DA Manual de usuario

Este manual también es adecuado para

Funai 6513DA Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos