MooreCo Deluxe Mobile Reversible Board Assembly Instructions
- Tipo
- Assembly Instructions
Deluxe Mobile Reversible Board
UPDATED AS OF: 08/15/2022 1 of 6
INSTRUCCIONES DE ENSEMBLAJE
NO LA TIRE
INSTRUCTIONS DE MONTAGE
NE PAS JETER
ASSEMBLY INSTRUCTIONS
DO NOT THROW AWAY!
Parts List
UPDATED AS OF: 08/15/2022 2 of 6
Hardware
P1 - Leg
P2 - Tray
P3 - Cross Brace
P4 - Framed Board
x3
x6
x6
x6
A - M6 Screw
B - Drill Screw
C - Flange
D - Knob
E - Locking Casters
F -Non-Locking Casters
G - Caster Wrench
x2
x6
x2
x2
x2
x2
x1
For full product warranty details, please visit:
Para obtener información sobre la garantía del producto, consulte este sitio (ingles):
Pour plus d’informations sur la garantie du produit, consultez ce site (anglais):
For questions on assembly or missing/damaged parts, please contact us using the
following information.
Para preguntas sobre el ensamblaje o piezas faltantes o dañadas, por favor
contáctenos usando la siguiente información.
Pour toute question sur le montage l-assamblage manquantes ou endommagées,
veuillez nous contacter en utilisant les l’information ci-dessous.
To register your product for warranty, please visit:
Para registrar la garantía del producto, vea este sitio (en ingles):
Pour enregistrer la garantie de votre produit, consultez ce site (en anglais):
Review full assembly instructions and
check that all parts are present before
beginning assembly. Heavy or large
furniture may require multiple persons in
order to properly assemble. If you have
questions regarding assembly, contact
the manufacturer before continuing.
Damage due to incorrect assembly may
not be covered by warranty. Do not use
product unless all screws are tight. Check
all screws for tightness at least every
six months. If parts are broken, missing,
damaged, or worn, stop use of the product
until repairs are made by your dealer using
factory authorized parts.
WARNINGS AND DISCLAIMERS
WARRANTY
CARE & MAINTENANCE
PRODUCT REGISTRATION
UPDATED AS OF: 08/15/2022 3 of 6
Phone:
1.800.749.2258
(Monday – Friday, 8AM – 5PM
Central Time)
http://moorecoinc.com/warranty
https://moorecoinc.com/register
Email:
support@moorecoinc.com
Previo a comenzar el proceso de
ensamblaje favor de revisar las
instrucciones y asegurarse que cuenta con
todas las partes y materiales necesarios.
Es posible que los muebles grandes o
pesados, requieran mas de una persona
para ensamblarlos correctamente. Por
favor contacte al fabricante directamente
si tiene alguna duda o pregunta antes de
continuar con el proceso de armado del
producto. La garantía no cubrirá daños
que ocurrieron por errores cometidos
durante el proceso de ensamblaje. Todos
los tornillos deben estar ajustados previo
el uso del producto. Debe revisar los
tornillos periódicamente, por lo menos
cada seis meses y asegurarse de que
estén bien ajustados. Por favor detenga
el uso del producto si partes del producto
se pierden, rompen, se deterioran por uso
o se rompen. Favor de contactar a su
distribuidor para que le envíen las partes
necesarias o realice las reparaciones
necesarias con partes autorizadas por el
fabricante.
Avant de commencer l’ assamblage
veuillez consulter les instructions
complètes et vérier si vous avez toutes
les pièces nécessaires. Ill est possible que
plusieurs personnes soient nécessaires
pour assemble des meubles grand ou
lourds. En cas de doute sur l assamblage
contactez le fabricant avant de continuer.
Les dommages encourus pendant
l’assamblage ne seront pas couvert par
la garantie. Ne pas utiliser le produit sans
vérier que tous les vis soient serrées.
Vériez que les vis sont serrées au moins
tous le 6 mois. Si aucune pièce se casse,
manque, est endommagée ou usée,
arrêtez d’ utiliser de produit jusqu’à ce
que le vendeur le repaire a l’aide de pièces
autorisées par la fabricant.
ADVERTENCIAS Y RENUNCIAS AVERTISSEMENTS
STEP 1
UPDATED AS OF: 08/15/2022 4 of 6
STEP 2
Attach 2 Locking Casters (E) and 2 Non-Locking Casters (F) to Legs (P-1) as shown.
Attach Cross Brace (P-3) to Legs (P-1) using 2 Screws (A).
1
Parts List
3Remove 2 Screws from each side of Framed Board (P4).
2.
Attach 2 Locking Casters (E) and 2 Non-Locking
Casters (F) to Legs (P-1) as shown.
4Attach 2 Flanges (C) to theFramed Board (P-4)
using 4 Screws removed in Step #3.
#668AC, AF & AG
Aluminum Reversible
A Phillips Screw 2 EA
B Phillips Drill Screw 6 EA
CFlange 2 EA
D Knob 2 EA
E3” Locking Caster 2 EA
F 3” Non-Locking Caster 2 EA
GCaster Wrench 1 EA
Hardware List
P-1 Leg 2 EA
P-2 Tray 1 EA
P-3 Cross Brace 1 EA
P-4 Framed Board 1 EA
A
P-3
P-1
Attach Cross Brace (P-3) to Legs (P-1) using 2
Screws (A).
Missing Parts or UPS Damaged Parts
For Your Convenience you can
EMAIL us at
24HOURS 7 DAYS A WEEK
R
EAD
T
HROUGH
I
NSTRUCTIONS FROM BEGINNING TO
END
BEFORE
STARTING TO ASSEMBLE UNIT
.
P-4
Screw
Screw
Screw
C
P-4
C
Screw
Screw
Finger Tighten Only!
Tighten Casters using Caster Wrench (G).
F
P-1
E
F
A
1
Parts List
3Remove 2 Screws from each side of Framed Board (P4).
2.
Attach 2 Locking Casters (E) and 2 Non-Locking
Casters (F) to Legs (P-1) as shown.
4Attach 2 Flanges (C) to theFramed Board (P-4)
using 4 Screws removed in Step #3.
#668AC, AF & AG
Aluminum Reversible
A Phillips Screw 2 EA
B Phillips Drill Screw 6 EA
CFlange 2 EA
D Knob 2 EA
E3” Locking Caster 2 EA
F 3” Non-Locking Caster 2 EA
GCaster Wrench 1 EA
Hardware List
P-1 Leg 2 EA
P-2 Tray 1 EA
P-3 Cross Brace 1 EA
P-4 Framed Board 1 EA
A
P-3
P-1
Attach Cross Brace (P-3) to Legs (P-1) using 2
Screws (A).
Missing Parts or UPS Damaged Parts
For Your Convenience you can
EMAIL us at
24HOURS 7 DAYS A WEEK
R
EAD
T
HROUGH
I
NSTRUCTIONS FROM BEGINNING TO
END
BEFORE
STARTING TO ASSEMBLE UNIT
.
P-4
Screw
Screw
Screw
C
P-4
C
Screw
Screw
Finger T
ighten Only!
Tighten Casters using Caster Wrench (G).
F
P-1
E
F
A
Attach 2 Flanges (C) to theFramed Board (P-4) using 4 Screws removed in Step #3.
STEP 3
UPDATED AS OF: 08/15/2022 5 of 6
Remove 2 Screws from each side of Framed Board (P4).
STEP 4
1
Parts List
3Remove 2 Screws from each side of Framed Board (P4).
2.
Attach 2 Locking Casters (E) and 2 Non-Locking
Casters (F) to Legs (P-1) as shown.
4Attach 2 Flanges (C) to theFramed Board (P-4)
using 4 Screws removed in Step #3.
#668AC, AF & AG
Aluminum Reversible
A Phillips Screw 2 EA
B Phillips Drill Screw 6 EA
CFlange 2 EA
D Knob 2 EA
E3” Locking Caster 2 EA
F 3” Non-Locking Caster 2 EA
GCaster Wrench 1 EA
Hardware List
P-1 Leg 2 EA
P-2 Tray 1 EA
P-3 Cross Brace 1 EA
P-4 Framed Board 1 EA
A
P-3
P-1
Attach Cross Brace (P-3) to Legs (P-1) using 2
Screws (A).
Missing Parts or UPS Damaged Parts
For Your Convenience you can
EMAIL us at
24HOURS 7 DAYS A WEEK
R
EAD
T
HROUGH
I
NSTRUCTIONS FROM BEGINNING TO
END
BEFORE
STARTING TO ASSEMBLE UNIT
.
P-4
Screw
Screw
Screw
C
P-4
C
Screw
Screw
Finger Tighten Only!
Tighten Casters using Caster Wrench (G).
F
P-1
E
F
A
1
Parts List
3Remove 2 Screws from each side of Framed Board (P4).
2.
Attach 2 Locking Casters (E) and 2 Non-Locking
Casters (F) to Legs (P-1) as shown.
4Attach 2 Flanges (C) to theFramed Board (P-4)
using 4 Screws removed in Step #3.
#668AC, AF & AG
Aluminum Reversible
A Phillips Screw 2 EA
B Phillips Drill Screw 6 EA
CFlange 2 EA
D Knob 2 EA
E3” Locking Caster 2 EA
F 3” Non-Locking Caster 2 EA
GCaster Wrench 1 EA
Hardware List
P-1 Leg 2 EA
P-2 Tray 1 EA
P-3 Cross Brace 1 EA
P-4 Framed Board 1 EA
A
P-3
P-1
Attach Cross Brace (P-3) to Legs (P-1) using 2
Screws (A).
Missing Parts or UPS Damaged Parts
For Your Convenience you can
EMAIL us at
24HOURS 7 DAYS A WEEK
R
EAD
T
HROUGH
I
NSTRUCTIONS FROM BEGINNING TO
END
BEFORE
STARTING TO ASSEMBLE UNIT
.
P-4
Screw
Screw
Screw
C
P-4
C
Screw
Screw
Finger Tighten Only!
Tighten Casters using Caster Wrench (G).
F
P-1
E
F
A
STEP 5
UPDATED AS OF: 08/15/2022 6 of 6
THIS COMPLETES ASSEMBLY INSTRUCTION
Spread the frame assembly at the top and insert the Framed Board(P-4) between
Legs(P-1) and attach Flanges (C) to the legs using 2 Knobs (D).
STEP 6
Assemble Tray (P-2) to Legs (P-1) using 6 Drill Screws (B).
-
1
-
2
-
3
-
4
-
5
-
6
MooreCo Deluxe Mobile Reversible Board Assembly Instructions
- Tipo
- Assembly Instructions
Documentos relacionados
-
MooreCo Height Adjustable Flipper Table Assembly Instructions
-
-
-
-
-