Intermec AV5 Compliance Insert

Tipo
Compliance Insert
AV5 Compliance Insert
For Users in the United States and Canada
The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of
accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may
void the compliance of this product and may result in the loss of the users authority to operate the equipment.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the radio or television receiving antenna.
Increase the separation between the computer equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Conformité aux normes canadiennes sur les appareils numériques
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
For Users Outside of the United States or Canada
Caution: This marking indicates that the user should read all included documentation before use.
Attention: Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse.
Caution: For use with Intermec Model CN2 or CN2B. For power cables use Intermec Part Number 203-803-001 or
203-802-001. No user-serviceable parts.
Attention: Pour utilisation avec le modèle Intermec CN2 ou CN2B. Pour les câbles d’alimentation, utiliser la pièce
n° 203-803-001 ou 203-802-001. Ne contient aucune pièce réparable par l’utilisateur.
Caution: This marking indicates that the user should read all included documentation before use.
Caution: For use with Intermec Model CN2 or CN2B. For power cables use Intermec Part Number 203-803-001 or
203-802-001. No user-serviceable parts.
I.T.E. 729T
ACCESSORY
S&E
美国和加拿大以外的用户请注意
Für Benutzer außerhalb von Kanada oder den Vereinigten Staaten
Para usuários fora do Canadá ou dos Estados Unidos
Для пользователей вне Соединенных Штатов или Канады
Para usuarios fuera de Canada o de los Estados Unidos
AV5 Compliance Insert
*933-036-001*
P/N 933-036-001
警告:该标志表明用户在使用前应阅读所有随附文档。
警告:供与 Intermec CN2 型或 CN2B 型配套使用。使用 Intermec 部件号为 203-803-001 或 203-802-001 的电源线。
所有部件无需用户动手安装。
Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen
lesen soll.
Vorsicht: Zum Gebrauch mit dem Intermec-Modell CN2 oder CN2B vorgesehen. Für Stromkabel Intermec-
Bestellnummer 203-803-001 oder 203-802-001 verwenden. Enthält keine Teile, die vom Benutzer gewartet werden
können.
Cuidado: Esta identificação indica que o usuário deve ler toda a documentação fornecida antes do uso.
Cuidado: Para uso com o modelo CN2 ou CN2B da Intermec. Use os cabos de alimentação com número de produto
203-803-001 ou 203-802-001 da Intermec. Este equipamento não contém peças que possam ser reparadas pelo usuário.
Осторожно: Эта пометка означает, что пользователь должен прочитать всю прилагаемую документацию,
прежде чем начинать работу.
Осторожно: Предупреждение: для использования с моделями Intermec CN2 или CN2B. Используйте кабели
питания Intermec изд. 203-803-001 или 203-802-001. Детали, обслуживаемые пользователем, отсутствуют.
Precaución: Esta marca indica que el usuario debe leer toda la documentación incluida antes del uso.
Precaución: Para usarse con los Modelos CN2 o CN2B de Intermec. Para cables de alimentación use el número de pieza
Intermec 203-803-001 o el 203-802-001. No hay piezas a las cuales pueda dar servicio el usuario.
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2006 Intermec Technologies
Corporation. All rights reserved.
  • Page 1 1
  • Page 2 2

Intermec AV5 Compliance Insert

Tipo
Compliance Insert

en otros idiomas