Samsung 6000 Manual de usuario

Marca: Samsung

Modelo: 6000

Categoría: Televisores LCD

Tipo: Manual de usuario

LED TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please

www.samsung.com/register

Model Serial No.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comuníquese con SAMSUNG WORLDWIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de

atención al cliente de SAMSUNG.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service

Consommateurs Samsung.

Country Customer Care Center

Web Site Address

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca

Samsung Electronics Canada Inc., Customer

Service 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc., Service

à la Clientèle 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us

Samsung Electronics America, Inc.

105 Challenger Road

Ridgefield Park, NJ 07660-0511

BN68-02112C-00

[6000-NA]BN68-02112C-Eng.indb 1 2009-03-30 �� 2:22:18

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen

format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to

ll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images

on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no

more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites

or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that

exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in

the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary

patterns or dark bars.

On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection

and use, as well as burned-in images, are not covered by your Samsung limited warranty.

U.S.A Only

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.

In particular, this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396,

5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080,

and under US Published Patent Application No. 2001-44713-A1.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for

commercial use. The license does not cover any product unit other than this product unit and the license does not extend to

any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with

this product unit. The license only covers the use of this product unit to encode and/or decode audio les conforming to the

ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not

conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

Other countries

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for

commercial use. The license does not cover any product unit other than this product unit and the license does not extend to

any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with

this product unit. The license only covers the use of this product unit to encode and/or decode audio les conforming to the

ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not

conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung

Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG

will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and

in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specied, and to the

Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this

Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the

Service Center. Transportation to and from the Service Center is the responsibility of the purchaser.

Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in

normal use of the product.

Excluded, but not limited to, are any originally specied provisions for, in-home or on-site services, minimum or maximum

repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

In the United States : 1-800-SAMSUNG (1-800-726-7864)

In Canada : 1-800-SAMSUNG

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen

Do not display a still image on the LED panel for more than 2 hours as it can cause screen image retention. This image

retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and contrast of the

screen when displaying a still image.

Watching the LED TV in 4:3 format for a long period of time may leave traces of borders displayed on the

left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or

a game console may cause a similar effect to the screen. Damages caused by the above effect are not

covered by the Warranty.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To

prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

❑

●

❑

●

[6000-NA]BN68-02112C-Eng.indb 1 2009-03-30 �� 2:22:19

Setting up Your TV

List of Features .................................................................................. 2

Accessories ....................................................................................... 2

Viewing the Control Panel ................................................................. 3

Viewing the Remote Control .............................................................. 4

Installing Batteries in the Remote Control ......................................... 5

Viewing the menus ............................................................................ 5

Plug & Play Feature ........................................................................... 7

Connections

Connecting VHF and UHF Antennas ................................................. 8

Connecting Cable TV......................................................................... 9

Viewing the Connection Panel ......................................................... 10

CHANNEL

Channel Menu ................................................................................. 13

Managing Channels ......................................................................... 14

PICTURE

Conguring the Picture Menu .......................................................... 16

Viewing Picture-in-Picture................................................................ 20

Using Your TV as a Computer (PC) Display .................................... 21

Setting up the TV with your PC........................................................ 22

SOUND

Conguring the Sound Menu ........................................................... 23

SETUP

Conguring the Setup Menu ............................................................ 25

Setting the Time ............................................................................... 28

Network Connection ........................................................................ 30

Setting the Network ......................................................................... 33

INPUT / SUPPORT

Input Menu ....................................................................................... 36

Support Menu .................................................................................. 36

■

Media Play (USB)

Connecting a USB Device ............................................................... 38

Media Play Function ........................................................................ 39

Sorting the Photo List ...................................................................... 41

Photo List Option Menu ................................................................... 42

Viewing a Photo or Slide Show........................................................ 43

Slide Show Option Menu ................................................................. 44

Sorting the Music List ...................................................................... 46

Music List Option Menu ................................................................... 47

Playing Music .................................................................................. 48

Music Play option Menu .................................................................. 49

Sorting the Movie List ...................................................................... 49

Movie List Option Menu ................................................................... 50

Playing a Movie File ........................................................................ 50

Movie Play Option Menu ................................................................. 53

Using the Setup Menu ..................................................................... 54

ANYNET

Connecting Anynet

Devices ........................................................... 55

Setting Up Anynet

..........................................................................

Switching between Anynet

Devices ............................................... 56

Recording ........................................................................................ 57

Listening through a Receiver (Home Theater)................................. 57

Troubleshooting for Anynet

............................................................

InfoLink

Using InfoLink .................................................................................. 59

Using the Weather Service .............................................................. 59

Using the News Service .................................................................. 60

Using the Stock Service .................................................................. 60

InfoLink Setup .................................................................................. 61

RECOMMENDATIONS

Troubleshooting ............................................................................... 62

Installing the Stand .......................................................................... 63

Disconnecting the Stand .................................................................. 63

Assembling the Cables .................................................................... 64

Wall Mount Kit Specications (VESA) ............................................. 65

Preparing before installing Wall-Mount ............................................ 66

Anti-Theft Kensington Lock ............................................................. 66

Securing the Installation Space ....................................................... 66

Securing the TV to a Wall or Cabinet .............................................. 67

Specications .................................................................................. 68

Dimensions ...................................................................................... 70

■

CONTENTS

English

License

TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD

technology is incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

DivX® Certified to play DivX® video, including premium content.

Symbol

N O T

Press Note One-Touch Button TOOL Button

❑

English - 1

[6000-NA]BN68-02112C-Eng.indb 1 2009-03-30 �� 2:22:19

English - 2

SETTING UP YOUR TV

To use your TV, you rst have to set it up to suit your environment.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and specifications may be changed without notice in order to enhance product performance.

List of Features

Adjustable picture settings that can be stored in the TV’s memory.

Automatic timer to turn the TV on and off.

A special sleep timer.

Excellent Digital Interface & Networking : With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed with

no Cable Box/Satellite receiver (Set-Top Box) needed.

HDMI/DVI connection of your PC to this TV.

Excellent Picture Quality

SRS TruSurround HD provides a virtual surround system.

Media Play: Allows you to play music files, pictures, and movies saved on a USB.

Accessories

Remote Control (BN59-00850A) &

Batteries (AAA x 2)

Cleaning Cloth

(BN63-01798B)

Warranty Card /

Safety Guide

TV-Holder & Screw (X1)

(BN96-10788B)

(Depending on the model)

Holder-Wire Cable

(BN61-05596A)

(Depending on the model)

Holder-Wire stand

(BN61-05491A)

Holder-Ring (4ea)

(BN61-05280A)

Holder-Wire (3ea)

(BN61-05373A)

Cover-Bottom

(UN32B6000: BN63-05854A)

(UN40B6000: BN63-05654A)

(UN46B6000: BN63-05654A)

(UN55B6000: BN63-05654A)

Stand Screw (X5)

(6003-000337)

UN32B6000, UN40B6000, UN46B6000

Stand Screw (X4)

(6003-001003)

UN32B6000

Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.

The items color and shape may vary depending on the model.

●

(M4xL10)

(M8xL19)

(M4xL12)

[6000-NA]BN68-02112C-Eng.indb 2 2009-03-30 �� 2:22:22

English - 3

Viewing the Control Panel

The product color and shape may vary depending on the model.

The front panel buttons can be activated by touching them with your finger.

1 REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.

(POWER): Press to turn the TV on and off.

: Press to change channels. In the on-screen menu, use the

buttons as you would use the ▼ and ▲

buttons on the remote control.

: Press to increase or decrease the volume. In the on-screen menu, use the

buttons as you would use the

◄ and ► buttons on the remote control.

5 MENU: Press to see an on-screen menu of your TV’s features.

6 SOURCE

: Toggles between all the available input sources. In the on-screen menu, use this button as you use the

ENTER

button on the remote control.

7 SPEAKERS

1 2

6 5 4 3

[6000-NA]BN68-02112C-Eng.indb 3 2009-03-30 �� 2:22:22

English - 4

Viewing the Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

The performance of the remote control may be affected by bright light.

The product color and shape may vary depending on the model.

POWER : Turns the TV on and

off.

TV : Selects the TV mode

directly.

NUMERIC BUTTONS : Press to

change the channel.

: Press to select additional

channels (digital) being

broadcast by the same station.

For example, to select channel

‘54-3’, press ‘54’, then press ‘

’

and ‘3’.

CH LIST : Used to display

Channel Lists on the screen.

TOOLS : Use to quickly select

frequently used functions.

INFO.L : Press to use the News,

Stock Market and Weather

Forecast information services

available over Samsung’s

network.

COLOR BUTTONS : Use these

buttons in the Channel list,

Media Play menu, etc.

SOURCE: Press to display

and select the available video

sources.

: Press to increase or

decrease the volume.

SRS: Selects SRS TruSurround

HD mode.

MEDIA.P: Allows you to play

music files, pictures, and movies.

INFO: Press to display

information on the TV screen.

Use these buttons in the Media

Play and Anynet

modes. (

∏

This remote can be used to

control recording on Samsung

recorders with the Anynet

feature)

ON/OFF

: Pressing the

ON/OFF

light button toggles

between on and off. When the

remote control is on, and a button

is pressed on the remote control,

the remote control buttons will

be lit for a moment. (Using the

remote control with the ON/OFF

light button set to On will

reduce the battery usage time.)

PRE-CH : Enables you to return

to the previous channel you were

watching.

MENU : Displays the main on-

screen menu.

FAV.CH : Press to switch to your

favorite channels.

(

RETURN : Returns to the

previous menu

)

 UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTER

: Use to

select on-screen menu items and

change menu values.

EXIT : Press to exit the menu.

: Press to change

channels.

MUTE

: Press to temporarily

cut off the sound.

P.SIZE: Picture size selection.

MTS: Press to choose stereo,

mono or Separate Audio Program

(SAP broadcast).

CC: Controls the caption

decoder.

(

)

[6000-NA]BN68-02112C-Eng.indb 4 2009-03-30 �� 2:22:23

English - 5

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the

figure.

Install two AAA size batteries.

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the

diagram inside the compartment.

Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t

be using the remote control for a long time. (Assuming typical TV

usage, the batteries should last for about one year.)

If the remote control doesn’t work, check the following:

Is the TV power on?

Are the plus and minus ends of the batteries reversed?

Are the batteries drained?

Is there a power outage or is the power cord unplugged?

Is there a special fluorescent light or neon sign nearby?

Viewing the menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.

Operation the OSD (On Screen Display)

The access step may differ depending on the selected menu.

Press the MENU button.

The main menu appears on the screen. The menu’s left side has icons : Picture, Sound,

Channel, Setup, Input, Application, Support.

3. Press the ▲ or ▼ button to select one of the icons.



❑

MENU Button

Display the main on-screen menu.

ENTER

/ DIRECTION Button

Move the cursor and select an item. Select

the currently selected item. Confirm the

setting.

RETURN Button

Return to the previous menu.

EXIT

Exit the on-screen menu.

Mode :Standard ▶

Backlight :7

Contrast :95

Brightness :45

Sharpness :50

Color :50

Tint(G/R) :G50/R50

AdvancedSettings

Picture

[6000-NA]BN68-02112C-Eng.indb 5 2009-03-30 �� 2:22:23

English - 6

4. Then press the ENTER

button to access the icon’s sub-menu.

Press the ▲ or ▼ button to select the icon’s submenu.

Press the ◄ or ► button to decrease or increase the value of a particular item. The

adjustment OSD may differ depending on the selected menu.

Press the ENTER

button to complete the configuration. Press the EXIT button to exit.

Mode :Standard

Backlight :7 ▶

Contrast :95

Brightness :45

Sharpness :50

Color :50

Tint(G/R) :G50/R50

AdvancedSettings

PictureOptions

Picture

Move

Adjust

Enter

Return

▲

Backlight

▼

Help icon

[6000-NA]BN68-02112C-Eng.indb 6 2009-03-30 �� 2:22:23

English - 7

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

Press the POWER

button on the remote control.

You can also use the POWER

button on the TV.

The message Select Language of the OSD. is displayed.

Press the ENTER

button. Press the ▲ or ▼ button to select the language, then press

the ENTER

button. The message Select ‘Home Use’ when installing this TV in

your home. is displayed.

Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTER

button. The message Select the Antenna source to memorize. is displayed.

We recommend setting the TV to Home Use mode for the best picture in your home

environment.

Store Demo mode is only intended for use in retail environments.

If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume

button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTERE button to select Start.

Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.

In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ►

button, then press the ENTER

button. If you have Digital cable, select the cable system signal source for both Analog

and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.

Press the ENTER

button to select Start. The TV will begin memorizing all of the available channels.

To stop the search before it has finished, press the ENTER

button with Stop selected.

After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then

reappears. Press the ENTER

button when channel memorization is complete. The message Set the Clock Mode. is

displayed.

Press the ENTER

button. Press the ▲ or ▼ button to select Auto, then Press the ENTER

button. The message Set to

daylight saving time. is displayed. If you select Manual, Set current date and time. is displayed.

Press the ▲ or ▼ button to select Off, On or Auto, then press the ENTER

button.

Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTER

button. If you have received a

digital signal, the time will be set automatically. If not, refer to the ‘Setting the Time’ instructions to set the clock.

(see pages 28~29)

The description for the connection method providing the best HD screen quality is displayed. Check the description and press

the ENTER

button.

10.

The message Enjoy your TV. is displayed. When you have finished, press the ENTER

button.

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,

then press the ENTER

button.

Press the ENTER

button again to select Plug & Play.

The Plug & Play feature is only available in the TV mode.

Plug&Play  ▶

Language :English

Time

GameMode :Off

BDWise :On

NetworkType :Cable

NetworkSetup

V-Chip

Setup

SelectLanguageoftheOSD.

Language :English  ▶

Enter

Plug&Play

[6000-NA]BN68-02112C-Eng.indb 7 2009-03-30 �� 2:22:24

English - 8

CONNECTIONS

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like the diagram to the right, see ‘Antennas with 300

Ω Flat Twin Leads’ below.

If your antenna has one lead that looks like the diagram to the right, see ‘Antennas with 75 Ω

Round Leads’.

If you have two antennas, see ‘Separate VHF and UHF Antennas’.

Antennaswith300ΩFlatTwinLeads

If you are using an off-air antenna (such as a roof antenna or ‘rabbit ears’) that has 300Ω twin

at leads, follow the directions below.

Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not

supplied). Use a screwdriver to tighten the screws.

Plug the adaptor into the ANT IN terminal on the back of the TV.

Antennaswith75ΩRoundLeads

Plug the antenna lead into the ANT IN terminal on the back of the TV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine

the two antenna signals before connecting the antennas to the TV. This procedure requires an

optional combiner-adaptor (available at most electronics shops).

Connect both antenna leads to the combiner.

Plug the combiner into the ANT IN terminal on the bottom of the rear panel.

ANT IN

UHF

VHF

ANT IN

UHF

VHF

[6000-NA]BN68-02112C-Eng.indb 8 2009-03-30 �� 2:22:24

English - 9

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

Plug the incoming cable into the ANT IN terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable

channels.

Connecting to a Cable Box that Descrambles All Channels

1. Find the cable that is connected to the ANT OUT terminal on your cable box.

This terminal might be labeled ‘ANT OUT’, ‘VHF OUT’ or simply, ‘OUT’.

Connect the other end of this cable to the ANT IN terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-

way splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.)

1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.

This terminal might be labeled ‘ANT IN’, ‘VHF IN’ or simply, ‘IN’.

Connect this cable to a two-way splitter.

Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.

Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.

After you have made this connection, set the A/B switch to the ‘A’ position for normal viewing. Set the A/B switch to the ‘B’

position to view scrambled channels. (When you set the A/B switch to ‘B’, you will need to tune your TV to the cable box’s

output channel, which is usually channel 3 or 4.)

ANT IN

ANT IN ANT OUT

ANT IN

Splitter

Cable Box

Incoming cable

TV Rear

ANT IN

RF (A/B) Switch

[6000-NA]BN68-02112C-Eng.indb 9 2009-03-30 �� 2:22:25

English - 10

Viewing the Connection Panel

The product color and shape may vary depending on the model.

1 POWER INPUT

Connects the supplied power cord.

The location of the POWER INPUT may be different depending on its model.

2 LAN

Connect a LAN cable to this port to connect to the Network.

3 ANT IN

Connects to an antenna or cable TV system.

Use an antenna cable which is smaller than 14 mm (0.55 inch).

4 HDMI IN 1(DVI), 2, 3, 4 / PC/DVI AUDIO IN

Connects to the HDMI jack of a device with an HDMI output.

No sound connection is needed for an HDMI to HDMI connection.

Use an HDMI cable which is smaller than 14 mm (0.55 inch).

What is HDMI?

HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video

signals using a single cable.

The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth

Digital Copy Protection) coding feature installed.

The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI

cable and there is no sound, connect the HDMI cable to the HDMI IN 1(DVI) jack and the audio cables to the PC/DVI

AUDIO IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player /

Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter

(DVI to HDMI) for video connection and the PC/ DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable

connection, you must use the HDMI IN 1(DVI) jack.

When connecting via DVI, a separate audio connection must be made. Use a 2RCA to 3.5mm miniplug cable for this

purpose.



Cable Television

Network

[6000-NA]BN68-02112C-Eng.indb 10 2009-03-30 �� 2:22:25

English - 11

5 KENSINGTON LOCK

The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a

locking device, contact the dealer where you purchased the TV.

The location of the Kensington Lock may be different depending on its model.

6 COMPONENT IN / AV IN

Connects Component video / audio.

The COMPONENT IN jack is also used as the AV IN jack.

When connecting, match the color of the connector to the jack.

Connect the video cable to the COMPONENT IN [Y/VIDEO] jack and the audio cable to the COMPONENT IN [R-AUDIO-

L] jacks.

If you have a ‘mono’ (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks

of the TV. Alternatively, connect the cable to the ‘R’ jack. If your VCR is stereo, you must connect two cables.

When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (Green) does not match the color of the video cable

(Yellow).

7 PC/DVI AUDIO IN

Connect to the audio output jack on your PC.

DVI audio input from external devices.

8 PC IN

Connects to the video and audio output jacks on your PC.

If your PC supports an HDMI connection, you can connect this to the HDMI IN 1(DVI), 2, 3 or 4 terminal.

If your PC supports a DVI connection, you can connect this to the HDMI IN 1(DVI) / PC/DVI AUDIO terminal.



BWR

[6000-NA]BN68-02112C-Eng.indb 11 2009-03-30 �� 2:22:25

English - 12

9 EX-LINK

Connector for service only.

0 USB1(HDD) / USB2

Connector for software upgrades and Media Play, etc. You can connect to Samsung’s network wirelessly using the ‘Samsung

Wireless LAN Adapter’ (Sold separately).

For USB HDD, use the USB1(HDD) port.

Turning on or off the TV while a USB device is connected may damage the files on the USB device.

! AUDIO OUT

Connects to the audio input jacks on your Amplifier/Home theater.

When connecting, use the appropriate connector (sold separately).

When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the volume

level with the Amplifier’s volume control.

@ DIGITAL AUDIO OUT (OPTICAL)

Connects to a Digital Audio component such as a Home theater receiver.

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV

and adjust the volume level with the system’s volume control.

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

When the Home Theater receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is

displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a

digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the

TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio,

connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an

Amplifier or Home Theater, not the TV.

W R

[6000-NA]BN68-02112C-Eng.indb 12 2009-03-30 �� 2:22:26

English - 13

CHANNEL

You can congure various settings for your TV channels with features such as Auto Program, Favorite Channels, and Signal

Strength.

Channel Menu

Antenna→Air/Cable

Before your television can begin memorizing the available channels, you must specify the type

of signal source that is connected to the TV (i.e. an Air or a Cable system).

Press the TOOLS button to display the Tools menu. You can also set the Antenna by

selecting Tools→SwitchtoCable (or Switch to Air).

Auto Program

Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna

signals

When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC identify various types of cable TV

systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point

the signal source has been selected.

After all the available channels are stored, it starts to remove scrambled channels (Removing scrambled channel). The Auto

program menu then reappears.

If you want to stop Auto Programming, press the ENTER

button. The Stop Auto Program? message will be displayed.

Select Yes by pressing the ◄ or ► button, then press the ENTER

button.

Clear Scrambled Channel (digital channels only)

This function is used to lter out scrambled channels after Auto Program is completed. This process may take up to 20~30

minutes.

To stop searching scrambled channels: Press the ENTER

button to select Stop. Press the ◄ button to select Yes, then

press the ENTER

button.

This function is only available in Cable mode.

Channel List

For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions. (see pages 14~15)

You can select these options by simply pressing the CH LIST button on the remote control.

Fine Tune (analog channels only)

Use ne tuning to manually adjust a particular channel for optimal reception.

If you do not store the fine-tuned channel in memory, adjustments are not saved.

‘*’ will appear next to the name of fine-tuned channels.

To reset the fine tuning setting, press the ▼ button to select Reset, then press the ENTER

button.

❑

■

❑

Antenna :Air ▶

AutoProgram

ClearScrambledChannel

ChannelList

FineTune

Channel

[6000-NA]BN68-02112C-Eng.indb 13 2009-03-30 �� 2:22:26

English - 14

Managing Channels

Using this menu, you can add / delete or set favorite channels and use the program guide for

digital broadcasts.

All Channels

Shows all currently available channels.

Added Channels

Shows all added channels.

Favorite

Shows all favorite channels.

To select the favorite channels you have set up, press the FAV.CH button on the remote control.

Programmed

Shows all current reserved programs.

Select a channel in the All Channels, Added Channels or Favorite screen by pressing the ▲ / ▼ buttons, and pressing the

ENTER

button. Then you can watch the selected channel.

Using the color buttons with the Channel List

Red (Antenna): Switches to Air or Cable.

Green (Zoom): Enlarges or shrinks a channel number.

Yellow (Select): Selects multiple channel lists. You can perform the add/delete or add to Favorite/delete from Favorite

function for multiple channels at the same time. Select the required channels and press the yellow button to set all the

selected channels at the same time. The

mark appears to the left of the selected channels.

TOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Timer Viewing, Channel

Name Edit, Select All (or Deselect All) and Auto Program menus (The Options menus may differ depending on the

situation.)

Channel Status Display Icons

: A channel selected by pressing the yellow button.

(

: A program currently being broadcast.

: A channel set as a Favorite.

)

: A reserved program.

Channel List Option Menu (in All Channels / Added Channels / Favorite)

Press the TOOLS button to use the option menu.

Option menu items may differ depending on the channel status.

Add / Delete

You can delete or add a channel to display the channels you want.

All deleted channels will be shown on the All Channels menu.

A gray-colored channel indicates the channel has been deleted.

The Add menu only appears for deleted channels.

You can also delete a channel from the Added Channels or Favorite menu in the same

manner.

■



■

AllChannels

2  Air

4  Air

4-2

TV#8

8  Air

13  Air

13-1

TV#3 Alice’sAdventuresinWonderland

Air Antenna Zoom Select

Tools

Delete

AddtoFavorite

TimerViewing

ChannelNameEd

SelectAll

AutoProgram

AddedChannels

2  Air

4  Air

4-2

TV#8

8  Air

13  Air

13-1

TV#3 Alice’sAdventuresinWonderland

Air Antenna Zoom Select

Tools

[6000-NA]BN68-02112C-Eng.indb 14 2009-03-30 �� 2:22:26

English - 15

Add to Favorite / Delete from Favorite

You can set channels you watch frequently as Favorite.

Press the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favorites by selecting Tools

→AddtoFavorite (or Delete from Favorite).

The ‘

’ symbol will be displayed and the channel will be set as a favorite.

All favorite channels will be shown on Favorite menu.

Timer Viewing

If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List;

even when you are watching another channel. To reserve a program, set the current time first.

Only memorized channels can be reserved.

You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.

Reserving a program will be shown in the Programmed menu.

Digital Program Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Program Guide for the channel appears. You can reserve

a program according to the procedures described above.

Channel Name Edit (analog channels only)

Channels can labeled so that their call letters appear whenever the channel is selected.

The names of digital broadcasting channels are automatically assigned and cannot be labeled.

Select All / Deselect All

Select All: You can select all the channels in the channel list.

Deselect All: You can deselect all the selected channels.

You can only select Deselect All when there is a selected channel.

Auto Program

For detailed procedures on using the Auto Program, refer to the ‘Channel Menu’ instructions. (see page 13)

Channel List Option Menu (in Programmed)

You can view, modify or delete a reservation.

Press the TOOLS button to use the option menu.

Change Info

Select to change a viewing reservation.

Cancel Schedules

Select to cancel a viewing reservation.

Information

Select to view a viewing reservation.

(You can also change the reservation information.)

Select All

Select all reserved programs.

■

●

■

Programmed

1/1/2009

1:595TV1

)



2:592TV3

)

TheEqualizer

3:592TV3

)

McMillan&Wife

4:592TV3

)

M.Spillane’smike

Air Antenna Zoom Select

Tools

Information

ChangeInfo

CancelSchedules

Information

SelectAll



[6000-NA]BN68-02112C-Eng.indb 15 2009-03-30 �� 2:22:26

English - 16

PICTURE

You can congure various picture options such as the picture mode, aspect ratio, and color to suit your personal preferences.

Configuring the Picture Menu

Mode

You can select the type of picture which best corresponds to your viewing requirements.

Press the TOOLS button to display the Tools menu. You can also set the picture mode by

selecting Tools→PictureMode.

Dynamic

Selects the picture for increased definition in a bright room.

Standard

Selects the picture for the optimum display in a normal environment.

Natural

Selects the picture for an optimum and eye-comfortable display.

Natural is not available in PC mode.

Movie

Selects the picture for viewing movies in a dark room.

Backlight / Contrast / Brightness / Sharpness / Color / Tint(G/R)

Your television has several setting options that allow you to control the picture quality.

Backlight: Adjusts the brightness of LED back light.

Contrast: Adjusts the contrast level of the picture.

Brightness: Adjusts the brightness level of the picture

Sharpness: Adjusts the edge definition of the picture.

Color: Adjusts color saturation of the picture.

Tint(G/R): Adjusts the color tint of the picture.

When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint(G/R) the OSD will be adjusted

accordingly.

In PC mode, you can only make changes to Backlight, Contrast and Brightness.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

The energy consumed during use can be signicantly reduced if the brightness level of the picture is lowered, which will

reduce the overall running cost.

Advanced Settings

Samsung’s new TVs allow you to make even more precise picture settings than previous

models.

Advanced Settings is available in Standard or Movie mode.

In PC mode, you can only make changes to Dynamic Contrast, Gamma and White

Balance from among the Advanced Settings items.

BlackTone→Off/Dark/Darker/Darkest

You can select the black level on the screen to adjust the screen depth.

❑

■

❑

●

❑

■

Mode :Standard ▶

Backlight :7

Contrast :95

Brightness :45

Sharpness :50

Color :50

Tint(G/R) :G50/R50

AdvancedSettings

Picture

Move

Adjust

Enter

Return

▲

Backlight

▼

BlackTone :Off  ▶

DynamicContrast :Medium

Gamma :0

ColorSpace :Native

WhiteBalance

FleshTone :0

EdgeEnhancement :On

Move

Enter

Return

AdvancedSettings

[6000-NA]BN68-02112C-Eng.indb 16 2009-03-30 �� 2:22:27

English - 17

DynamicContrast→Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma

You can adjust the primary color (red, green, blue) intensity.

Color Space

Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most

natural color.

Auto: Auto color space automatically adjusts to the most natural color tone based on program sources.

Native: Native color space offers deep and rich color tone.

Custom: Adjusts the color range to suit your preference.

Changing the adjustment value will refresh the adjusted screen.

Settings can be adjusted and stored for each external device you have connected to an input of the TV. For example, if

you have a DVD player connected to HDMI 1 and it is currently selected, settings and adjustments will be saved for the

DVD player.

Color: Red, Green, Blue, Yellow, Cyan or Magenta

Color is available when Color Space is set to Custom.

In Color, you can adjust the RGB values for the selected color.

To reset the adjusted RGB value, select Reset.

Red: Adjusts the red saturation level of the selected color.

Green: Adjusts the green saturation level of the selected color.

Blue: Adjusts the blue saturation level of the selected color.

Reset: Resets the color space to the default values.

White Balance

You can adjust the color temperature for more natural picture colors.

R-Offset: Adjusts the red color darkness.

G-Offset: Adjusts the green color darkness.

B-Offset: Adjusts the blue color darkness.

R-Gain: Adjusts the red color brightness.

G-Gain: Adjusts the green color brightness.

B-Gain: Adjusts the blue color brightness.

Reset: The previously adjusted white balance will be reset to the factory defaults.

Flesh Tone

You can emphasize the pink ‘flesh tone’ in the picture.

Changing the adjustment value will refresh the adjusted screen.

EdgeEnhancement→Off/On

You can emphasize object boundaries in the picture.

xvYCC→Off/On

Setting the xvYCC mode to on increases detail and color space when watching movies from an external device (ie. DVD player)

connected to the HDMI or Component IN jacks.

xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.

■

●



■

●

■

[6000-NA]BN68-02112C-Eng.indb 17 2009-03-30 �� 2:22:27

English - 18

Picture Options

In PC mode, you can only make changes to the Color Tone and Size from among the

items in Picture Options.

ColorTone→Cool/Normal/Warm1/Warm2/Warm3

Warm1, Warm2 or Warm3 is only activated when the picture mode is Movie.

Settings can be adjusted and stored for each external device you have connected to an

input of the TV.

Size

Occasionally, you may want to change the size of the image on your screen. Your TV comes

with several screen size options, each designed to work best with specific types of video input. Your cable box/satellite receiver

may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.

Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.

16:9 : Sets the picture to 16:9 wide mode.

Zoom1: Magnifies the size of the picture on the screen.

Zoom2: Magnifies the size of the picture more than Zoom1.

Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.

4:3 : Sets the picture to 4:3 normal mode.

Screen Fit: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p), Component

(1080i/1080p) or DTV (1080i) signals are input.

16:9 Zoom1 Zoom2

Wide Fit 4:3 Screen Fit

When Double (

) mode has been set in PIP, the Picture Size cannot be set.

Temporary image retention may occur when viewing a static image on the set for more than two hours.

After selecting Zoom1, Zoom2 or Wide Fit: Press the ► button to Select Position, then press the ENTER

button. Press

the ▲ or ▼ button to move the picture up and down. Then press the ENTER

button. Press the ► button to Select Size,

then press the ENTER

button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then

press the ENTER

button.

After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you made need to center the picture:

Press the ◄ or ► button to select Position, then press the ENTER

button. Press the ▲, ▼, ◄ or ► button to move the

picture.

Reset: Press the ◄ or ► button to select Reset, then press the ENTER

button. You can initialize the setting.

HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Input Source Picture Size

ATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3

DTV(1080i), Component (1080i, 1080p),

HDMI (720p, 1080i, 1080p)

16:9, 4:3, Wide Fit, Screen Fit

PC 16:9, 4:3

❑

■

●



ColorTone :Normal  ▶

Size :16:9

DigitalNR :Auto

HDMIBlackLevel :Normal

FilmMode :Off

BlueOnlyMode :Off

AutoMotionPlus120Hz :Standard

Move

Enter

Return

PictureOptions

16:9

Zoom2

MoveZoom1

Move

Screen Fit4:3

Wide Fit

Move

[6000-NA]BN68-02112C-Eng.indb 18 2009-03-30 �� 2:22:27

English - 19

DigitalNR→Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static

and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

HDMIBlackLevel→Normal/Low

You can select the black level on the screen to adjust the screen depth.

This function is active only when an external device is connected to the TV via HDMI. The HDMI Black Level function may not

be compatible with all external devices.

FilmMode→Off/Auto1/Auto2

The TV can be set to automatically sense and process lm signals from all sources and adjust the picture for optimum quality.

Film Mode is supported in TV, Video, Component (480i / 1080i) and HDMI (480i / 1080i).

Off: Turns the Film Mode function off.

Auto1: Automatically adjusts the picture for the best quality when watching a film.

Auto2: Automatically optimizes the video text on the screen (not including closed captions) when watching a film.

BlueOnlyMode→Off/On

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green

signals from the video signal so as to provide a Blue Filter effect that is used to adjust the color and Tint of video equipment such

as DVD players, Home Theaters, etc. Using this function, you can adjust the color and Tint to preferred values appropriate to

the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow color Bar Patterns, without using an

additional Blue Filter.

Blue Only Mode is available when the picture mode is set to Movie or Standard.

AutoMotionPlus120Hz→Off/Clear/Standard/Smooth/Custom/Demo

Removes drag from fast scenes with a lot of movement to provide a clearer picture.

If you enable Auto Motion Plus 120Hz, noise may appear on the screen. If this occurs, set Auto Motion Plus 120Hz to Off.

Off: Switches Auto Motion Plus 120Hz off.

Clear: Sets Auto Motion Plus 120Hz to minimum.

Standard: Sets Auto Motion Plus 120Hz to medium.

Smooth: Sets Auto Motion Plus 120Hz to maximum.

Custom: Adjusts the blur and judder reduction level to suit your preference.

Blur Reduction: Adjusts the blur reduction level from video sources.

Judder Reduction: Adjusts the judder reduction level from video sources when playing films.

Reset: Reset the custom settings.

Demo: Displays the difference between Auto Motion Plus 120Hz on and off modes.

PictureReset→ResetPictureMode/Cancel

Resets all picture settings to the default values.

Reset Picture Mode: Current picture values return to default settings.

■

●

■

●



●

❑

[6000-NA]BN68-02112C-Eng.indb 19 2009-03-30 �� 2:22:27

English - 20

Viewing Picture-in-Picture

You can use the PIP feature to simultaneously watch the TV tuner and one external video

source. This product has one built-in tuner, which does not allow PIP to function in the same

mode. Please see ‘PIP Settings’ below for details.

Press the TOOLS button to display the Tools menu. You can also configure PIP related

settings by selecting Tools→PIP.

If you select the PIP picture sound, refer to the ‘Configuring the Sound Menu’ instructions.

(see page 24)

PIP Settings

Main picture Sub picture

Component

HDMI1/DVI, HDMI2, HDMI3, HDMI4

While V-Chip is in operation, the PIP function cannot be used.

If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear.

You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game

or karaoke.

PIP→On/Off

You can activate or deactivate the PIP function.

Size→

You can select a size of the PIP-picture.

Position→

–

—

You can select a position of the PIP-picture.

In Double (

) mode, Position cannot be selected.

Air/Cable→Air/Cable

Select either Air or Cable as the input source for the sub-screen.

Channel

You can select the channel for the sub-screen.

❑

■

LightEffect :WatchingTV

EnergySaving :Off

PIP  ▶

Setup

PIP :On  ▶

Size :

Position :

Air/Cable :Air

Channel :Air3

Move

Enter

Return

PIP

[6000-NA]BN68-02112C-Eng.indb 20 2009-03-30 �� 2:22:27

English - 21

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on

your PC will probably be different, depending upon your particular version of Windows and

your particular video card. However, even if your actual screens look different, the same basic

set-up information will apply in almost all cases. (If not, contact your computer manufacturer or

Samsung Dealer.)

First, click on ‘Control Panel’ on the Windows start menu.

When the control panel window appears, click on ‘Appearance and Themes’ and a display

dialog-box will appear.

When the control panel window appears, click on ‘Display’ and a display dialogbox will

appear.

Navigate to the ‘Settings’ tab on the display dialog-box.

The correct size setting (resolution) - Optimum: 1920 X 1080 pixels

If a vertical-frequency option exists on your display settings dialog box, the correct

value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system

doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no

video. For the display modes listed below, the screen image has been optimized during manufacturing.

D-Sub and HDMI/DVI Input

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

Mode Resolution

Horizontal Frequency

(KHz)

Vertical Frequency

(Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H / V)

IBM

640 x 350 31.469 70.086 25.175 +/-

720 x 400 31.469 70.087 28.322 -/+

MAC

640 x 480 35.000 66.667 30.240 -/-

832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

VESA CVT

720 x 576 35.910 59.950 32.750 -/+

1152 x 864 53.783 59.959 81.750 -/+

1280 x 720 44.772 59.855 74.500 -/+

1280 x 720 56.456 74.777 95.750 -/+

1280 x 960 75.231 74.857 130.000 -/+

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1152 x 864 67.500 75.000 108.000 +/+

1280 x 1024 63.981 60.020 108.000 +/+

1280 x 1024 79.976 75.025 135.000 +/+

1280 x 800 49.702 59.810 83.500 -/+

1280 x 800 62.795 74.934 106.500 -/+

1280 x 960 60.000 60.000 108.000 +/+

1360 x 768 47.712 60.015 85.500 +/+

1440 x 900 55.935 59.887 106.500 -/+

1440 x 900 70.635 74.984 136.750 -/+

1680 x 1050 65.290 59.954 146.250 -/+

VESA GTF

1280 x 720 52.500 70.000 89.040 -/+

1280 x 1024 74.620 70.000 128.943 -/-

VESA DMT /

DTV CEA

1920 x 1080p 67.500 60.000 148.500 +/+



■

[6000-NA]BN68-02112C-Eng.indb 21 2009-03-30 �� 2:22:27

English - 22

Setting up the TV with your PC

Preset: Press the SOURCE button to select PC mode.

Auto Adjustment

Use the Auto Adjust function to have the TV automatically adjust the video signals it receives.

The function also automatically fine-tunes the settings and adjusts the frequency values and

positions.

Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment

by selecting Tools→AutoAdjustment.

This function does not work in DVI-Digital mode.

Screen

Coarse / Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is

not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and

Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on

the center of screen.

PC Position

Adjust the PC’s screen positioning if it does not fit the TV screen.

Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust

the Horizontal-Position.

Image Reset

You can replace all image settings with the factory default values.

❑

■

Brightness :45

Sharpness :50

AutoAdjustment  ▶

Screen

AdvancedSettings

PictureOptions

PictureReset

Picture

Coarse   50

Fine   0

PCPosition

ImageReset

Move

Enter

Return

Screen

[6000-NA]BN68-02112C-Eng.indb 22 2009-03-30 �� 2:22:28

English - 23

SOUND

You can congure the sound mode, volume, multi-track sound options, etc.

Configuring the Sound Menu

Mode→Standard/Music/Movie/ClearVoice/Custom

Press the TOOLS button to display the Tools menu. You can also set the sound mode by

selecting Tools→SoundMode.

Standard: Selects the normal sound mode.

Music: Emphasizes music over voices.

Movie: Provides the best sound for movies.

Clear Voice: Emphasizes voice over other sounds.

Custom: Recalls your customized sound settings.

Equalizer

The sound settings can be adjusted to suit your personal preference.

Mode: Selects the sound mode among the predefined settings.

Balance L/R: Adjusts the balance between the right and left speaker.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.

Reset: Resets the equalizer settings to the default values.

SRSTruSurroundHD→Off/On

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two

speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,

including internal television speakers. It is fully compatible with all multichannel formats.

Press the TOOLS button to display the Tools menu. You can also set the SRS TruSurround HD by selecting Tools→SRSTS

HD.

Preferred Language (digital channels only)

Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of

the program into foreign languages).

You can listen in a language other than the Preferred Language by pressing the MTS button on the remote control.

Preferred Language is available only in Digital TV mode.

You can only select the language from among the actual languages being broadcast.

Multi-Track Sound (MTS) (analog channels only)

Press the MTS button on the remote control repeatedly to select Mono, Stereo or SAP.

Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.

Stereo: Choose for channels that are broadcasting in stereo.

SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.

Multi-Track Sound is available only in Analog TV mode.

Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.

❑

●

❑

●

❑

●

Mode :Custom ▶

Equalizer

SRSTruSurroundHD :Off

PreferredLanguage :English

Multi-TrackSound :Mono

AutoVolume :Off

SpeakerSelect :TVSpeaker

SoundSelect :Main

Sound

[6000-NA]BN68-02112C-Eng.indb 23 2009-03-30 �� 2:22:28

English - 24

AutoVolume→Off/On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is

changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the

modulation signal is high or by raising the sound output when the modulation signal is low.

Speaker Select

When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home

theater’s (external) speakers.

External Speaker: Used to listen to the sound of the External (Home Theater) Speakers.

TV Speaker: Used to listen to the sound of the TV Speakers.

The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker. Please set the volume

on your Home theater.

If you select External Speaker in the Speaker Select menu, the sound settings will be limited

TV’s Internal Speakers Audio Out (Optical, L/R Out) to Sound System

RF / AV / Component / PC / HDMI RF / AV / Component / PC / HDMI

TV Speaker Sound Output Sound Output

External Speaker Mute Sound Output

Video No Signal Mute Mute

SoundSelect→Main/Sub

When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.

You can select this option when PIP is set to On.

Press the TOOLS button to display the Tools menu. You can also set the sound of the sub picture by selecting Tools→PIP

→SoundSelect.

SoundReset→ResetAll/ResetSoundMode/Cancel

You can restore the Sound settings to the factory defaults.

Reset Sound Mode: Current sound values return to default settings.

❑

●

❑

SoundReset



Move

Enter

Return

Selectthesoundresetoptions.

ResetAll ResetSoundMode Cancel

[6000-NA]BN68-02112C-Eng.indb 24 2009-03-30 �� 2:22:28

English - 25

SETUP

You can set up additional functions.

Configuring the Setup Menu

Language

You can set the menu language.

Time

For detailed procedures on setting up options, refer to the ‘Setting the Time’ instructions.

(see pages 28~29)

GameMode→Off/On

When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by

selecting game menu.

Restrictions on game mode (Caution)

To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.

If you display the TV menu in Game Mode, the screen shakes slightly.

Game Mode is not available in regular TV and PC mode.

While PIP is in operation, the Game Mode function cannot be used.

If the picture is poor when external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and

connect external devices.

If Game Mode is On:

Picture mode is automatically changed to Standard and cannot be changed.

Sound mode is automatically changed to Custom and cannot be changed. Adjust the sound using the equalizer.

The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer

settings to the factory defaults.

BDWise→Off/On

Provides the optimal picture quality for SAMSUNG DVD, Blu-ray and Home Theater products which support BD Wise. You can

enjoy a richer picture when using them connected to this Samsung TV.

Connect SAMSUNG products that have BD Wise using an HDMI cable.

When the BD Wise set to On, the picture mode is automatically changed to the optimal resolution.

BD Wise is available in HDMI mode.

Network Type / Network Setup

For detailed procedures on setting up options, refer to the ‘Setting the Network’ instructions. (see pages 30~35)

V-Chip

The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN

(personal ID number) before any of the V-Chip restrictions are set up or changed.

V-Chip function is not available in HDMI, Component or PC mode.

The default PIN number of a new TV set is ‘0-0-0-0’

Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.

Change PIN

The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered,

the Confirm New PIN screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been

memorized.

If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : POWER

(off) → MUTE→8→2→4→POWER (on).

❑



❑

■

Plug&Play

Language :English ▶

Time

GameMode :Off

BDWise :On

NetworkType :Cable

NetworkSetup

V-Chip

Caption

Setup

[6000-NA]BN68-02112C-Eng.indb 25 2009-03-30 �� 2:22:28

English - 26

V-ChipLock→Off/On

You can block rated TV Programs.

TV Parental Guidelines

You can block TV programs depending on their rating. This function allows you to control what

your children are watching.

TV-Y: Young children / TV-Y7: Children 7 and over / TV-G: General audience / TV-PG:

Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature audience

ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L:

Adult Language / D: Sexually Suggestive Dialog

The V-Chip will automatically block certain categories that are more restrictive. For

example, if you block TV-Y category, then TV-Y7 will automatically be blocked. Similarly,

if you block the TV-G category, then all the categories in the young adult group will be

blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together

similarly.

The V-chip will automatically block certain categories that are ‘More restrictive’. For example, if you block L sub-rating in TV-

PG, then the L sub-ratings in TV-14 and TV-MA will automatically be blocked.

MPAA Rating

You can block movies depending on their MPAA rating. The Motion Picture Association of

America(MPAA) has implemented a rating system that provides parents or guardians with

advance information on which films are appropriate for children.

G: General audience (no restrictions).

PG: Parental guidance suggested.

PG-13: Parents strongly cautioned.

R: Restricted. Children under 17 should be accompanied by an adult.

NC-17: No children under age 17.

X: Adults only.

NR: Not rated.

The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block the PG-13 category, then

R, NC-17 and X will automatically be blocked also.

Canadian English

C: Programming intended for children under age 8.

C8+: Programming generally considered acceptable for children 8 years and over to watch on their own.

G: General programming, suitable for all audiences.

PG: Parental Guidance.

14+: Programming contains themes or content which may not be suitable for viewers under the age of 14.

18+: Adult programming.

The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block G category, then PG, 14+

and 18+ will automatically be blocked also.

Canadian French

G: General

8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own.

13 ans+: Programming may not be suitable for children under the age of 13.

16 ans+: Programming is not suitable for children under the age of 16.

18 ans+: Programming restricted to adults.

The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block 8 ans+ category, then 13

ans+, 16 ans+ and 18 ans+ will automatically be blocked also.

■

●

■

●

■

●

■

●

TV Parental Guidelines

ALL FV V S L D

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

Move

Enter

Return

Allow All

Block All

MPAA Rating

PG-13

NC-17

Move

Enter

Return

Allow All

Block All

[6000-NA]BN68-02112C-Eng.indb 26 2009-03-30 �� 2:22:28

English - 27

Downloadable U.S. Rating

Parental restriction information can be used while watching DTV channels

If information is not downloaded from the broadcasting station, the Downloadable U.S.

rating menu is deactivated.

Parental restriction information is automatically downloaded while watching DTV

channels. It may take several seconds.

The Downloadable U.S. rating menu is available for use after information is

downloaded from the broadcasting station. However, depending on the information from

the broadcasting station, it may not be available for use.

Parental restriction levels differ depending on the broadcasting station. The default

menu name and Downloadable US rating changes depending on the downloaded

information.

Even if you set the On-screen display to your desired language, the Downloadable U.S. Rating menu will appear in English

only.

The rating will automatically block certain categories that are more restrictive.

The rating titles (For example: Humor Level..etc) and TV ratings (For example: DH, MH, H..etc) may differ depending on the

broadcasting station.

How to Reset the TV after the V-Chip Blocks a Channel (Emergency Escape)

If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and

the following message will appear:

Enter your PIN, then press the ▲ or ▼ button to temporarily disable the V-Chip Lock.

If you forget the PIN, press the remote-control buttons in the following sequence, which

resets the pin to 0-0-0-0 : POWER (off) → MUTE→8→2→4→POWER (on)

Caption (On-Screen Text Messages)

Caption→Off/On

You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.

Press the CC button on the remote control to turn the Caption on or off.

The Caption feature doesn’t work in Component, HDMI or PC modes.

Caption Mode

You can select the desired caption mode.

The availability of captions depends on the program being broadcast.

Default / CC1~CC4 / Text1~Text4 (analog channels only)

The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device

to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4 (digital channels only)

The Digital Captions function operates on digital channels.

Service1~6 in digital caption mode may not be available depending on the broadcast.

Digital Caption Options (digital channels only)

Size: This option consists of Default, Small, Standard and Large. The default is Standard.

Font Style: This option consists of Default, Style 0 ~ Style 7. You can change the font you want. The default is Style 0.

Foreground Color: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can

change the color of the letter. The default is White.

Background Color: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can

change the background color of the caption. The default is Black.

Foreground Opacity: This option consists of Default, Transparent, Translucent, Solid and Flashing. You can change the

opacity of the letter.

■

❑

■

●

■

●

Downloadable U.S. Rating

Humor Level ► 1/2

Move

Enter

Return

Allow All

Block All

Rating title

The number of all rating information

The number of current rating information

ReceivedRating:MPAAX/CanadianEnglish:C8+/LL/VH

ThischannelisblockedbyV-Chip.PleaseenterthePIN

tounblock.

Change EnterPIN

[6000-NA]BN68-02112C-Eng.indb 27 2009-03-30 �� 2:22:29

English - 28

Background Opacity: This option consists of Default, Transparent, Translucent, Solid and Flashing. You can change the

background opacity of the caption.

Return to Default: This option sets each of Size, Font Style, Foreground Color, Background Color, Foreground Opacity

and Background Opacity to its default.

Digital Caption Options are available only when Default and Service1 ~ Service6 can be selected in Caption Mode.

The availability of captions depends on the program being broadcast.

Default means to follow the standard set by the broadcaster.

Foreground and Background cannot be set to have the same color.

Foreground Opacity and Background Opacity cannot be both set to Transparent.

Melody→Off/Low/Medium/High

A melody sound can be set to come on when the TV is powered On or Off.

The Melody does not play.

When no sound is output from the TV because the MUTE button has been pressed.

When no sound is output from the TV because the volume has been reduced to minimum with the VOL – button.

When the TV is turned off by Sleep Timer function.

LightEffect→Off/InStandby/WatchingTV/Always

You can turn the LED on/off on the front of TV. Turn it off to save power or if the LED bothers

you.

Off: LED is always Off.

In Standby: LED is On when TV is turned off.

Watching TV: LED is On when watching TV.

Always: LED is always On, regardless of TV settings.

Set the Light Effect to Off to reduce the power consumption.

The color of light may vary depending on the model.

EnergySaving→Off/Low/Medium/High/Auto

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy

Saving mode option to High to reduce eye fatigue as well as power consumption.

PIP

For detailed procedures on setting up options, refer to the ‘Viewing Picture-in-Picture’ instructions. (see page 20)

Setting the Time

Clock

Setting the clock is necessary in order to use the various timer features of the TV.

The current time will appear every time you press the INFO button.

If you disconnect the power cord, you have to set the clock again.

Clock Mode

You can set up the current time manually or automatically.

Auto: Set the current time automatically using the time from the digital broadcast.

Manual: Set the current time to a manually specified time.

Depending on the broadcast station and signal, the auto time may not be set correctly. If

this occurs, set the time manually.

The Antenna or cable must be connected in order to set the time automatically.

Clock Set

You can set the current time manually.

This function is only available when Clock Mode is set to Manual.

You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control.

●

❑



❑

●

❑

■

●

■

LED

Clock :--:--  ▶

SleepTimer :Off

Timer1 :Inactivated

Timer2 :Inactivated

Timer3 :Inactivated

 

Move

Enter

Return

Time

Plug&Play

Language :English

Time  ▶

GameMode :Off

BDWise :On

NetworkType :Cable

NetworkSetup

V-Chip

Caption

Melody :Medium

Setup

[6000-NA]BN68-02112C-Eng.indb 28 2009-03-30 �� 2:22:29

English - 29

Time Zone

Select your time zone.

This function is only available when Clock Mode is set to Auto.

DST(DaylightSavingTime)→Off / On / Auto

Switches the Daylight Saving Time function on or off.

This function is only available when Clock Mode is set to Auto.

Sleep Timer

The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180

minutes).

Press the TOOLS button to display the Tools menu. You can also set the sleep timer by

selecting Tools→SleepTimer.

To cancel the Sleep Timer function, select Off.

Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made.

You must set the clock first.

On Time

Set the hour, minute, am/pm, and activate / inactivate.

(To activate the timer with the setting you’ve chosen, set to Activate.)

Off Time

Set the hour, minute, am/pm, and activate / inactivate.

(To activate the timer with the setting you’ve chosen, set to Activate.)

Volume

Set the desired volume level.

Source→TV/USB

You can select the TV or USB device content to be played when the TV turns on automatically. Select TV or USB. (Make sure that

an USB device is connected to your TV.)

When there is only one photo file in the USB, the Slide Show will not play.

Antenna (when Source is set to TV)

Select Air or Cable.

Channel (when Source is set to TV)

Select the desired channel.

Contents (when Source is set to USB)

You can select a folder on the USB Device with music or photo files to be played when the TV turns on automatically.

If the folder name is too long, the folder can not be selected.

If you are using two of the same type USB device, be sure the folder names are different so the correct USB is read.

Repeat

Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.

When Manual is selected, press the ► button to select the desired day of the week. Press the ENTER

button over the

desired day and the

mark will appear.

You can set the hour, minute and channel by pressing the number buttons on the remote control.

Auto Power Off

When you set the timer on, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned

on by the timer. This function is only available in timer on mode and prevents overheating, which may occur if a TV is on for

too long time.

■

❑

■

OnTime

Move

Adjust

Enter

Return

Timer1

OffTime

Volume

Source Antenna Channel

TV Air 0

Repeat

Once

Sun Mon Tue Wed Thu Fri Sat

00 am Inactivate

[6000-NA]BN68-02112C-Eng.indb 29 2009-03-30 �� 2:22:29

English - 30

Network Connection

You can set up the Internet Protocol so that you can communicate with various connected networks.

Network Connection - Cable

LAN Connection for a DHCP Environment

The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP

address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them

manually.

Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable.

Connect the Modem port on the wall and the external modem with a Modem Cable.

You can connect the LAN via a Sharer (Router).

You can connect the LAN port and the TV directly depending on your network status.

The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.

If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10

seconds and then try again.

For the connections between the external modem and the Sharer (Router), refer to the owner’s manual of the corresponding

product.

You can connect the TV to the LAN directly without connecting it through a Sharer (Router)

You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have to use an automatic-

connection-type ADSL modem.

❑

■

TV Rear Panel

The Modem Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

1 LAN Cable2 Modem Cable

TV Rear Panel

The Modem Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

LAN CableModem Cable LAN Cable

IP Sharer

TV Rear Panel

The LAN Port on the Wall

LAN Cable

[6000-NA]BN68-02112C-Eng.indb 30 2009-03-30 �� 2:22:30

English - 31

LAN Connection for Static IP Environment

The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address,

subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).

Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable.

You can connect the LAN via a Sharer (Router).

The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.

If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You must

enter these values to complete the network settings. If you do not know the values, ask your network administrator.

For the information on how to configure and connect a Sharer (Router), refer to the owner’s manual for the corresponding

product.

You can connect the TV to the LAN directly without connecting it through a Sharer (Router).

If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP.

For the procedures to use a static IP address, ask your Internet Service Provider.

■

TV Rear Panel

The LAN Port on the Wall

IP Sharer

LAN CableLAN Cable

TV Rear PanelThe LAN Port on the Wall

1 LAN Cable

[6000-NA]BN68-02112C-Eng.indb 31 2009-03-30 �� 2:22:30

English - 32

Network Connection - Wireless

You can connect to the network wirelessly through a wireless IP sharer.

1. Connect the ‘Samsung Wireless LAN Adapter’ into the USB1(HDD) or USB2 terminal of the TV.

You must use the ‘Samsung Wireless LAN Adapter’(WIS09ABGN) to use a wireless network.

Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers,

Ecommerce sites and Samsungparts.com.

To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP,

your TV can use a DHCP or static IP address to connect to the wireless network.

Samsung’s Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N.

If the wireless IP sharer allows you to turn the Ping connection function on/off, turn it on.

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is

currently being used by another device nearby, this will result in interference and communications may fail.

If you apply a security system other than the systems listed below, it will not work with the TV.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1) Authentication Mode : OPEN, SHARED, WPAPSK, WPA2PSK

2) Encryption Type : WEP, TKIP, AES

When applying the security key for the Ad-hoc mode, only the following is supported.

1) Authentication Mode : SHARED, WPANONE

2) Encryption Type : WEP, TKIP, AES

If your AP supports WPS(Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or

PIN (Personal Indentification Number). WPS will automatically configure the SSID and WPA key in either mode.

If the device isn’t certified, it may not connect to the TV via the ‘Samsung Wireless LAN Adapter’.

❑



TV Rear Panel

The LAN Port on the Wall

Wireless IP

sharer

Samsung Wireless LAN

Adapter

LAN Cable

[6000-NA]BN68-02112C-Eng.indb 32 2009-03-30 �� 2:22:31

English - 33

Setting the Network

Network Type

Select Cable or Wireless as the method to connect to the network.

The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.

Cable

Connect to the network using a cable.

Wireless

Connect to the network wirelessly.

Network Setup

Cable Network Setup (when Network Type is set to Cable)

Please check if the LAN cable is connected.

InternetProtocolSetup→AutoSetup/ManualSetup

Network Test: You can test or confirm the network connection status after setting up the network.

When unable to connect to a wired network

If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time

and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet

as the MAC address differs from that of the device (PC).

In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)

to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may

not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet

using an Internet Sharer (Router).

The internet connection may fail due to a firewall problem. In this case, contact your Internet service provider. If you cannot

connect to the Internet even if you have followed the procedures of your Internet service provider, please contact Samsung

Electronics at 1-800-SAMSUNG.

Cable Network Setup-Auto Setup

If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are

automatically configured.

Set Network Type to Cable.

Select Cable Network Setup.

Set Internet Protocol Setup to Auto Setup.

The Internet Protocol is set automatically.

Select Network Test to check the network connectivity.

Cable Network Setup-Manual

To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol

(IP).

Set Network Type to Cable.

Select Cable Network Setup.

Set Internet Protocol Setup to Manual Setup.

Set up IP Address, Subnet Mask, Gateway and DNS Server.

Press the number buttons on the remote control when you set the Network manually.

Select Network Test to check the network connectivity.

Wireless Network Setup

The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.

InternetProtocolSetup→AutoSetup/ManualSetup

Network Test: You can test or confirm the network connection status after setting up the network.

❑

■

❑

■

●

■

●

InternetProtocolSetup :AutoSetup ▶

NetworkTest

Move

Enter

Return

CableNetworkSetup

IPAddress :   

SubnetMask :   

Gateway :    

DNSServer :

  

InternetProtocolSetup :ManualSetup  ▶

NetworkTest

Move

Enter

Return

CableNetworkSetup

IPAddress :



SubnetMask :



Gateway :





DNSServer :



GameMode :Off

BDWise :On

NetworkType :Cable ▶

NetworkSetup

V-Chip

Caption

Melody :Medium

LightEffect :WatchingTV

EnergySaving :Off

PIP

Setup

[6000-NA]BN68-02112C-Eng.indb 33 2009-03-30 �� 2:22:31

English - 34

When unable to connect to an AP

Your TV may fail to locate an AP that is configured as a private SSID type. In this case, please change the AP settings and try

again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the

first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the

Internet as the MAC address differs from that of the device (PC).

In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)

to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider,

please contact a Samsung Electronics at 1-800-SAMSUNG.

Select a network

Access Point: You can select the IP sharer to use when using a wireless network.

If a wireless Access Point is not in the Access Point list, press the Red button.

When the connection is made, you will be returned to the screen automatically.

If you have selected an Access Point with a security authentication:

The Security Key input screen appears. Enter the security key and press the

Blue button on the remote control.

If security encryption type is WEP, 0~9, A~F will be available when you input

security key.

Connecting WPS (Wi-Fi Protected Setup)

If Security Key is already set: In access point list, select WPS.

You can select PBC, PIN, Security Key.

Connecting by using PBC: Select a PBC (Push Button Configuration). Press the PBC

button on the AP (access point) within 2 minutes, and wait for connection.

Connecting by using PIN: Select a PIN (Personal Identification Number).

The message showing the PIN Code is displayed. Input the PIN Code at AP

device within 2 minutes. Select OK and wait for connection.

Try again if connecting operation doesn’t work

When the connection is not established although tried again, reset the access point. Please refer to a manual of each

access point.

Connecting by using Security Key: When selecting Security Key, the input window is

displayed. Input the security key and press Blue button.

Try again if connecting operation doesn’t work.

If Security Key is not set: When the security setting of AP that supports WPS is NONE,

you can select PBC, PIN, None Security. None Security is capable of connecting to AP

directly without using WPS function.

Process of PBC, PIN is same as above. Refer to if Security Key is already set.

Try again if connecting operation doesn’t work.

●



●



●

WirelessNetworkSetup



Move

Enter

Return

Selectanetwork 3/9



Ad-hoc

sson

jee

AP_1

Ap_2

PBC

SecurityKey

Cancel

PressthePBCbuttonontheaccesspoint.

AccessPointName:AP_1

PressOKAfterinputTV’sPincodeintheaccess

point’ssetup.

AccessPointName:AP_1

PINCode:12345678

CancelOK

WirelessNetworkSetup



Move

`~9

Number

Enter

Return

SecurityKey



Number



Lowercase

 

Delete

 

Done

WirelessNetworkSetup



Move

Enter

Return

Selectanetwork 3/9



Ad-hoc

sson

jee

AP_1

Ap_2

PBC

NoneSecurity

WirelessNetworkSetup



Move

`~9

Number

Enter

Return

SecurityKey



Number

 

Delete

 

Done

A B C D E F

[6000-NA]BN68-02112C-Eng.indb 34 2009-03-30 �� 2:22:32

English - 35

Ad-hoc: You can connect to a mobile device without an access point through the ‘Samsung Wireless LAN Adapter’ by

using a peer to peer network.

How to connect to new Ad-hoc

1. Choose Select a network, then a device list is displayed.

While in the device list, press the Blue button on the remote or select Ad-

hoc.

The message The existing network system may have limited

functionality. Do you want to change the network connection? is

displayed.

Input the generated Network Name(SSID) and Security Key into the

device you want to connect.

How to connect an existing Ad-hoc device

1. Choose Select a network, the device list is displayed.

Select the device you want in the Device list.

If security key was applied, input the security key again.

If network doesn’t operate normally, please check the Network

Name(SSID) and Security Key again. If the Security Key is incorrect,

it may be the reason for the malfunction.

Wireless Network Setup-Auto Setup

If you want to connect AP, AP should support DHCP. Only devices which support Ad-hoc mode

can be connected without DHCP.

Set Network Type to Wireless.

Select Wireless Network Setup.

Set Internet Protocol Setup to Auto Setup.

The Internet Protocol is set automatically.

Select a network through Select a network.

Select Network Test to check the network connectivity.

Wireless Network Setup-Manual Setup

1. Set Network Type to Wireless.

Select Wireless Network Setup.

Set Internet Protocol Setup to Manual Setup.

Set up IP Address, Subnet Mask, Gateway and DNS Server.

Press the number buttons on the remote control when you set the Network manually.

Select a network through Select a network.

Select Network Test to check the network connectivity.



InternetProtocolSetup :AutoSetup ▶

NetworkTest

Selectanetwork :AP1

Move

Enter

Return

WirelessNetworkSetup

IPAddress :   

SubnetMask :   

Gateway :    

DNSServer :

  

InternetProtocolSetup :ManualSetup ▶

NetworkTest

Selectanetwork :AP1

Move

Enter

Return

WirelessNetworkSetup

IPAddress :



SubnetMask :



Gateway :





DNSServer :



Theexistingnetworksystemmayhavelimited

functionality.Doyouwanttochangethenetwork

connection?

Yes No

[6000-NA]BN68-02112C-Eng.indb 35 2009-03-30 �� 2:22:32

English - 36

INPUT / SUPPORT

Input Menu

Source List

Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box /

Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your

choice.

Press the SOURCE button on the remote control to view an external signal source.

TV / AV / Component / PC / HDMI1/DVI / HDMI / HDMI / HDMI4 / USB

You can choose only those external devices that are connected to the TV. In the Source

List, connected inputs will be highlighted and sorted to the top. Inputs that are not

connected will be sorted to the bottom.

If USB devices are connected to the USB1(HDD) and USB2 jacks, they are displayed as

USB1 and USB2 in order.

PC always stays activated.

Using the color buttons on the remote with the Source list

Red (Refresh): Refreshes the connected external devices. Press this if your Source is

on and connected, but does not appear in the list.

TOOLS (Tools): Displays the Edit Name and Information menus.

Edit Name

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray

/ HD DVD / DMA

Name the device connected to the input jacks to make your input source selection easier.

When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI

mode to DVI PC in the Edit Name of the Input mode.

When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI mode to DVI or DVI PC in

the Edit Name of the Input mode. In this case, a separate sound connection is required.

Support Menu

Self Diagnosis

Picture Test

If you think you have a picture problem, perform the picture test. Check the color pattern on the

screen to see if the problem still exists.

Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes.

There may be a problem with the TV. Contact Samsung’s call center for assistance.

No: If the test pattern is properly displayed, select No. There may be a problem with your

external equipment. Please check your connections. If the problem still persists, refer to the

external device’s user manual.

❑

■



❑

■

❑

■

●

LegalNotice  ▶

ProductGuide

SelfDiagnosis

SoftwareUpgrade

HDConnectionGuide

ContactSamsung

Support

SourceList 

EditName

Input

Refresh

Tools

SourceList

PC :----

AV :----

Component :----

HDMI1/DVI :----

HDMI2 :----

SelfDiagnosis

Move

Enter

Return

PictureTest   ▶

SoundTest

SignalInformation

[6000-NA]BN68-02112C-Eng.indb 36 2009-03-30 �� 2:22:32

English - 37

Sound Test

If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound

through the TV.

If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV

speaker in the Sound menu.

The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing

the MUTE button.

Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with

the TV. Contact Samsung’s call center for assistance.

No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check

your connections. If the problem still persists, refer to the external device’s user manual.

Signal Strength (digital channels only)

Unlike analog channels, which can vary in reception quality from ‘snowy’ to clear, digital (HDTV) channels have either perfect

reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can,

however, adjust your antenna to improve the reception of available digital channels.

If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.

Continue to adjust the antenna until you find the best position with the strongest signal.

Software Upgrade

Samsung may offer upgrades for the TV’s firmware in the future. These upgrades can be

performed via the TV when it is connected to the Internet, or by downloading the new firmware

from samsung.com to a USB memory device.

Current Version is the software already installed in the TV.

Alternative Software (Backup) shows the previous version that will be replaced.

Software is represented as ‘Year/Month/Day_Version’. The more recent the date, the

newer the software version. Installing the latest version is recommended.

By USB

Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the

TV. Please be careful to not disconnect the power or remove the USB drive while upgrades

are being applied. The TV will turn off and turn on automatically after completing the firmware

upgrade. Please check the firmware version after the upgrades are complete (the new version

will have a higher number than the older version).

When software is upgraded, video and audio settings you have made will return to their default

(factory) settings. We recommend you write down your settings so that you can easily reset

them after the upgrade.

By Online

Upgrades the software using the Internet.

First, configure your network. For detailed procedures on using the Network Setup, refer to

the ‘Setting the Network’ instructions. (see pages 30~35)

If the internet connection doesn’t operate properly, connection can be broken. please retry downloading. If the problem still

happens, download by USB and upgrade.

Alternative Software (Backup)

If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version.

If software was changed, existing software is displayed.

You can change current software to alternative software by ‘Alternative Software’.

HD Connection Guide

This menu presents the connection method that provides the optimal quality for the HDTV. Refer to this information when

connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can view the

information regarding the call center, product and software file download method.

■

●

■

❑

■

❑

TV Rear Panel

USB Drive

CurrentVersion 2009/01/17_000001

ByUSB   ▶

ByOnline

AlternativeSoftware 2009/01/16_000000

Move

Enter

Return

SoftwareUpgrade

[6000-NA]BN68-02112C-Eng.indb 37 2009-03-30 �� 2:22:33

English - 38

MEDIA PLAY (USB)

Connecting a USB Device

1. Press the POWER button to turn the TV on.

Connect a USB device containing photo, music and/or movie files to the

USB1(HDD) or USB2 jack on the side of the TV.

When the Application selection screen is displayed, press the ENTER

button

to select Media Play (USB).

MTP (Media Transfer Protocol) is not supported.

The file system supports FAT16, FAT32 and NTFS.

Certain types of USB Digital camera and audio devices may not be

compatible with this TV.

Media Play only supports USB Mass Storage Class devices (MSC). MSC

is a Mass Storage Class Bulk-Only Transport device. Examples of MSC

are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not

supported.).

Please connect directly to the USB port of your TV. If you are using a separate

cable connection, there may be a USB compatibility problem.

Before connecting your device to the TV, please back up your files to prevent

them from damage or loss of data. SAMSUNG is not responsible for any data

file damage or data loss.

Connect a USB HDD to the dedicated USB1(HDD) port. Warning: Do not

exceed 1.5 amperes.

Do not disconnect the USB device while it is loading.

MSC supports MP3, JPEG and movie files, while a PTP device supports JPEG files only.

The higher the resolution of the image, the longer it takes to display on the screen.

The maximum supported JPEG resolution is 15360X8640 pixels.

For unsupported or corrupted files, the ‘Not Supported File Format’ message is displayed.

If sort key is set to Basic View, up to 1000 files can be displayed in each folder. The other sort key can display up to 10000

files.

MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM)

is a technology that supports the creation of content, the distribution and management of the content in an integrated

and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the

illegal copying of contents, as well as managing billings and settlements.

When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen.

If more than 2 PTP devices are connected, you can only use one at a time.

If more than one MSC device is connected, some of them may not be recognized. If a device requires high power (more

than 500mA or 5V), the USB device may not be supported.

If an over-power (Fail add new device USB1/USB2 Power Overload) warning message is displayed while you are

connecting or using a USB device, the device may not be recognized or may malfunction.

TV Rear Panel

USB Drive

851.86MB/993.02MBFree

Photo

SUM

Device

PHOTO

Exit

Music Movie Setup

[6000-NA]BN68-02112C-Eng.indb 38 2009-03-30 �� 2:22:33

English - 39

Using the Remote Control Button in Media Play Menu

Button Operations

▲/▼/◄/► Move the cursor and select an item.

ENTER

Select the currently selected item. While playing a slide show, movie, or music file:

- Pressing the ENTER

button during play pauses the play.

- Pressing the ENTER

button during pause resumes the play.

∂

∑

Play or pause the Slide Show, music or movie.

RETURN Return to the previous menu.

TOOLS Run various functions from the Photo, Music and Movie menus.

∫

Stop the current slide show, Music or Movie file.

Jump to previous group/Jump to next group.

INFO Show file information.

MEDIA.P Exit Media Play mode.

EXIT, TV

Stop Media Play mode and Returns to TV mode.

Media Play Function

This function enables you to view and listen to photo, music and/or movie files saved on a USB Mass Storage Class (MSC) device.

Entering the Media Play (USB) Menu

1. Press the MENU button. Press the ▲ or ▼ button to select Application, then

press the ENTER

button.

Press the ▲ or ▼ button to select Media Play (USB), then press the ENTER

button.

The Media Play (USB) menu is displayed.

Press the MEDIA.P button on the remote control to display the Media Play

menu.

Press the SOURCE button on the remote control to view the source list. Then

Press the ▲ or ▼ button to select USB.

Press the Red button, then press the ▲ or ▼ button to select the USB Memory. Press the ENTER

button.

This function differs depending on the USB Memory Device.

The selected USB device name appears at the bottom left of the screen.

Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then press the ENTER

button.

To exit Media Play mode, press the MEDIA.P button on the remote control.

851.86MB/993.02MBFree

Photo

SUM

Device

PHOTO

Return

Music Movie Setup

[6000-NA]BN68-02112C-Eng.indb 39 2009-03-30 �� 2:22:33

English - 40

Removing a USB Memory Device Safely

You can remove the device safely from the TV.

Press the TOOLS button in the Media Play file list screen, or while a Slide Show,

music or movie is being played.

Press the ▲ or ▼ button to select Safe Remove, then press the ENTER

button.

Remove the USB device from the TV.

Screen Display

Move to either ‘Sort key List Section’, ‘Group List Section’ or ‘File List Section’ using the Up and Down buttons. After selecting a

section, press the ◄ or ► buttons to select an item.

1 Current Sort key: This field shows the current standard for sorting files. Press the ◄ or ► button to change the standard for

sorting files.

2 View Groups:Shows the detailed groups of the files sorted according to the selected Sort key. The sort group where the

currently selected file is contained is highlighted.

3 Currently selected file: The selected file is the file you can now control. Photo and movie files are displayed as thumbnail

images.

4 Current Device: Shows the currently selected device name. Press the Red button to select a device.

Red (Device) button: Selects a connected device.

5 Help Items

Green (Favorites Setting) button: Changes the Favorites Setting for the selected file. Press this button repeatedly until

the desired value appears.

Yellow (Select) button: Selects file from the file list. Selected files are marked with a symbol

. Press the Yellow button

again to cancel a file selection.

TOOLS (Tools) button: Displays the option menus. (The option menu changes according to the current status.)

6 Item Selection Information: Shows the number of files that are selected by pressing the Yellow button.



Sort key List Section

Group List Section

File List Section

SUM Device

FavoritesSetting Select

Tools

Return

Preference

BasicView

Timeline

Folder

Color

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

5/15

1File(s)Selected

4 5

SUM Device

FavoritesSetting Select

Tools

Return

Preference

BasicView

Timeline

Folder

Color

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

SlideShow

PlayCurrentGroup

Information

SafeRemove

5/15

[6000-NA]BN68-02112C-Eng.indb 40 2009-03-30 �� 2:22:36

English - 41

Sorting the Photo List

You can sort photos in the Photo List by a particular standard.

Press the MEDIA.P button.

Press the ◄ or ► button to select Photo, then press the ENTER

button.

Press the ▲ button to move to the Sort key Section.

Press the ◄ or ► button to select a sorting standard. (Basic View, Timeline,

Color, Folder, Preference)

The photos are sorted according to the newly selected sorting standard.

Press the ▼ button to move to the File List Section.Press the

∂

(Play)/

ENTER

button to start the Slide Show in the order you selected.

To move to the previous/next group, press the

(REW) or

(FF) button.

Photo information is automatically set. The Color information extracted from a photo file may be different from your

expectations. You can change the Color and preference.

PTP does not support folder sort mode.

Basic View

Shows the folders on the USB memory device. If you select a folder and press the ENTER

button, only the photo files

contained in the selected folder are displayed.

When sorted according to the Basic View, you cannot set Favorite files.

Timeline

Sorts photos by date. It sorts by year and month from the earliest photo.

Color→Red/Yellow/Green/Blue/Magenta/Black/Gray/Unclassified

Sorts photos by Color. You can change the photo Color information.

You should set the Use Color View to on in the Setup menu before sorting photos by Color.

Folder

Sorts photos by folder. If there are many folders in USB, the photos files are shown in order in each folder. The photo file in the

Root folder is shown first and the others are shown in alphabetical order by name.

Preference→

FFF

Sorts photos by preference (Favorite). You can change the photo preferences.

Changing the Favorites Setting

Select the desired photo in the File List Section, then press the Green button repeatedly until the desired setting appears.

Up to 3 stars can be selected.

The stars are for grouping purposes only. For example, the 3 star setting does not have any priority over the one star setting.

❑

SUM Device

FavoritesSetting Select

Tools

Return

Preference

BasicView

Timeline

Folder

Color

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

5/15

[6000-NA]BN68-02112C-Eng.indb 41 2009-03-30 �� 2:22:37

English - 42

Photo List Option Menu

1. Press the MEDIA.P button.

Press the ◄ or ► button to select Photo, then press the ENTER

button.

Press the ◄ or ► button to select the desired photo file.

Selecting Multiple Photos

Press the ◄ or ► button to select the desired photo file. Then press the

Yellow button.

Repeat the above operation to select multiple photo files.

The mark

appears to the selected photo file.

Press the TOOLS button.

The option menu changes according to the current status.

Slide Show

Using this menu, you can play a SlideShow using the photo files on the USB memory device.

Play Current Group

Using this menu, you can play a SlideShow using only the photo files in the currently selected sorting group.

Change Group Info (When the Sort key is the Color)

You can change a selected photo file’s (or group of files) Color information in order to move it from one Color group to another.

This does not change the actual Color of the photo.

The group information of the current file is updated and the photos are moved to the new Color group.

To change the information of multiple files, select the files you want by pressing the Yellow button.

Deselect All (When at least one file is selected)

You can deselect all files.

The

mark indicating the corresponding file is selected is hidden.

Information

The photo file information including the name, the size, the resolution, the date modified and the path is displayed.

You can view the information of photo files during a SlideShow using the same

procedures.

Press the INFO button to viewing the information.

Safe Remove

You can remove the device safely from the TV.



❑

SUM Device

FavoritesSetting Select

Tools

Return

Color

Folder

Preference

Timeline

BasicView

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

SlideShow

PlayCurrentGroup

ChangeGroupInfo

Information

SafeRemove

5/15

[6000-NA]BN68-02112C-Eng.indb 42 2009-03-30 �� 2:22:39

English - 43

Viewing a Photo or Slide Show

Viewing a Slide Show

1. Press the ▼ button to select the File List Section.

Press the TOOLS button.

Press the ▲ or ▼ button to select Slide Show, then press the ENTER

button.

All files in the File List Section will be used for the Slide Show.

During the slide show, files are displayed in order from the currently shown file.

The Slide Show progresses in the order sorted in the File List Section.

Music files can be automatically played during the Slide Show if the Background

Music is set to On.

While a photo list is displayed, press the

∂

(Play)/ENTER

button on the

remote control to start slide show.

SlideShow Control Buttons

Button Operations

ENTER

Play/Pause the Slide Show.

∂

Play the Slide Show.

∑

Pause the Slide Show.

∫

Exit Slide Show and return to the photo list.

Change the SlideShow playing speed.

TOOLS Run various functions from the Photo menus.

Playing current group

1. Press the ▲ button to move to the Sort key Section.

Press the ◄ or ► button to select a sorting standard.

Press the ▼ button to move to the Group List Section.

Select a group using the ◄ and ► buttons.

Press the

∂

(Play) button.A slideshow begins with the files of the selected group.

Alternatively

Select a Sort key and then in the File List Section, select the photos contained in

the desired group.

To move to the previous/next group, press the

(REW) or

(FF) button.

Press the TOOLS button.

Press the ▲ or ▼ button to select Play Current Group, then press the ENTER

button.

Only the photos in the sorting group including the selected files will be used for the Slide Show.

●

SUM Device

FavoritesSetting Select

Tools

Return

BasicView

Timeline

Folder

Color

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

SlideShow

PlayCurrentGroup

Information

SafeRemove

5/15

Preference

Pause◀▶Previous/Next

Tools

Return

SUM

1234.jpg

580x7652008/12/025/15

▶Normal

SUM Device

FavoritesSetting Select

Tools

Return

BasicView

Timeline

Folder

Color

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

5/15

Preference

[6000-NA]BN68-02112C-Eng.indb 43 2009-03-30 �� 2:22:42

English - 44

ToperformaSlideShowwithonlytheselectedles

1. Press the ▼ button to select the File List Section.

Press the ◄ or ► button to select the desired photo in the File List Section.

Press the Yellow button.

Repeat the above operation to select multiple photos.

The

mark appears to the left of the selected photo.

If you select one file, the Slide Show will not be performed.

To deselect all selected files, press the TOOLS button and select Deselect All.

Press the

∂

(Play)/ENTER

button.

The selected files will be used for the Slide Show.

Alternatively

1. In the File List Section, press the Yellow button to select the desired photos.

Press the TOOLS button.

Press the ▲ or ▼ button to select Slide Show, then press the ENTER

button.

The selected files will be used for the Slide Show.

Slide Show Option Menu

1. During a slide show (or when viewing a photo), press the TOOLS button to set the

option.

Press the ▲ or ▼ button to select the desired option, then press the ENTER

button.

Stop Slide Show / Start Slide Show

You can start or stop a SlideShow.

SlideShowSpeed→Slow/Normal/Fast

You can select the slide show speed.

This function is available only during a slide show.

You can also change the speed of the Slide Show by pressing the

(REW) or

(FF) button during the Slide Show.

Slide Show Effect

You can select the screen transition effect used in the slideshow.

None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random

This function is available only during a slide show.

Rotate

You can rotate photos saved on a USB memory device.

Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚.

Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚.

The rotated file is not saved.

●

❑

■

❑

StopSlideShow

SlideShowSpeed : Normal

SlideShowEffect : Fade1

Rotate

Zoom

BackgroundMusic

PictureSetting

SoundSetting

Information

 ▼

Move

Enter

Exit

Tools

[6000-NA]BN68-02112C-Eng.indb 44 2009-03-30 �� 2:22:42

English - 45

Zoom

You can magnify photos saved on a USB memory device. (x1 → x2 → x4)

To move the enlarged photo image, press the ENTER

button, then press the ▲/▼/◄/► buttons. Note that when the

enlarged picture is smaller than the original screen size, the location change function doesn’t work.

The enlarged file is not saved.

Background Music

You can select background music when watching a Slide Show.

To use this feature, there must be music and photo files stored on the USB device.

Loading music files is needed to change BGM mode. Play music files in music category to load.

BackgroundMusic→Off/On

Off: Background music is not played.

On: When the background music is available, if you select On, the music is played back.

BGMMode→Mood/SelectedFile/Shuffle

You can select a mode to use for the background music.

BGMMood→Energetic/Rhythmical/Sad/Exciting/Calm/Unclassified

Music with the mood you selected is set as the background music.

If you set BGM Mode to Mood, you can select a mood.

Select Music File (0 File(s) Selected)

Only the selected music file is set as the background music.

If you set BGM Mode to Selected File, you can select a music file.

Picture Setting / Sound Setting

You can select the picture and sound settings.

Information

The photo file information is displayed.

Safe Remove

You can remove the device safely from the TV.

❑

■

●

■

❑

[6000-NA]BN68-02112C-Eng.indb 45 2009-03-30 �� 2:22:42

English - 46

Sorting the Music List

You can sort music files in the Music List by a particular standard.

Press the MEDIA.P button.

Press the ◄ or ► button to select Music, then press the ENTER

button.

Press the ▲ button to move to the Sort key Section.

Press the ◄ or ► button to select a sorting standard. (Basic View, Title, Artist,

Mood, Genre, Folder, Preference)

The Music files are sorted according to the newly selected sorting standard.

Press the ▼ button to move to the File List Section.Press the

∂

(Play)/

ENTER

button to start playing music in the order selected by the user.

To move to the previous/next group, press the

(REW) or

(FF) button.

Music information is automatically set. The mood information extracted from a

music file may differ from the expectations of the user. You can change the mood and preference.

If there is no title information for a music file, the filename is displayed.

If no information is available for the Artist, Album, Year, or Genre the corresponding item is displayed as blank.

Basic View

Shows the folders of the USB memory device. If you select a folder and press the ENTER

button, only the music files

contained in the selected folder are displayed.

When sorted according to the Basic View, you cannot set Favorite files.

Title

Sorts the music titles in symbol/number/alphabet/special order, and shows the music file.

Artist

Sorts the music file by artist in symbol/number/alphabet/special order.

Mood→Energetic/Rhythmical/Sad/Exciting/Calm/Unclassified

Sorts music files by the mood. You can change the music mood information.

Genre

Sorts music files by the genre.

Folder

Sorts music files by the folder. If there are many folders in USB, the files are shown in order in each folder. The music file in the

Root folder is shown first and the others are shown in alphabetical order by name.

Preference→

FFF

Sorts music files by preference (Favorite). You can change the music files preferences.

Changing the Favorites Setting

Select the desired music file in the File List Section, then press the Green button repeatedly until the desired setting appears.

Up to 3 stars can be selected.

The stars are for grouping purposes only. For example, the 3 star setting does not have any priority over the one star setting.

❑

SUM Device

FavoritesSetting Select

Tools

Return

Preference

BasicView

Title

Folder

Genre

ILoveYou

HaHaHa

Gold

Shine

Way

WantMe

Lies

GlenHans

OnceOst

2007

Soundtrack

3/37Energetic

[6000-NA]BN68-02112C-Eng.indb 46 2009-03-30 �� 2:22:43

English - 47

Music List Option Menu

1. Press the MEDIA.P button.

Press the ◄ or ► button to select Music, then press the ENTER

button.

Press the ◄ or ► button to select the desired Music file.

Selecting Multiple Music Files

Press the◄ or ► button to select the desired music file. Then press the

Yellow button.

Repeat the above operation to select multiple music files.

The mark

appears to the selected music file.

Press the TOOLS button.

The option menu changes according to the current status.

Play Current Group

Using this menu, you can only play music files in the currently selected sorting group.

Change Group Info (When the Sort key is Mood)

You can change the mood information of music files.

The group information of the current file is updated and the file is moved to the new group.

To change the information of multiple files, select files by pressing the Yellow button.

Deselect All (When at least one file is selected)

You can deselect all files.

The

mark indicating the corresponding file is selected is hidden.

Information

The music file information including the name, the size, the date modified and the path is displayed.

You can view the music file information during Play Current Group using the

same procedures.

Press the INFO button to viewing the information.

Safe Remove

You can remove the device safely from the TV.



❑

SUM Device

FavoritesSetting Select

Tools

Return

Preference

BasicView

Title

Folder

Genre

HaHaHa

Gold

Shine

Way

WantMe

Lies

ILoveYou

GlenHans

OnceOst

2007

Soundtrack

3/37Energetic

PlayCurrentGroup

Information

SafeRemove

[6000-NA]BN68-02112C-Eng.indb 47 2009-03-30 �� 2:22:43

English - 48

Playing Music

Playingamusicle

1. Press the ▼ button to select the File List Section.

Press the ◄ or ► button to select a music file to be played.

Press the

∂

(Play)/ENTER

button.

This menu only shows files with the MP3 file extension. Files with other

file extensions are not displayed, even if they are saved on the same USB

device.

The selected file is displayed at the top with its playing time.

To adjust the music volume, press the volume button on the remote control.

To mute the sound, press the MUTE button on the remote control.

If the sound is odd when playing MP3 files, adjust the Equalizer and SRS TruSurround HD in the Sound menu. (An

over-modulated MP3 file may cause a sound problem.)

The playing duration of a music file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of

the file.

(REW) or

(FF) buttons do not function during play.

Music Play Control Buttons

Button Operations

ENTER

Play/Pause the music file.

∂

Play the music file

∑

Pause the music file

∫

Exit play mode and return to the music list.

TOOLS Run various functions from the Music menus.

Music function information icon

When all music files in the folder (or the selected file) are repeated. Repeat Mode is On.

When all music files in the folder (or the selected file) are played once. Repeat Mode is Off.

Playing the music group

1. Press the ▲ button to move to the Sort key Section.

Press the ◄ or ► button to select a sorting standard.

Press the ▼ or ENTER

button to move to the Group List Section.

Press the

∂

(Play) button. The files of the selected group will start playing.

Alternatively

Select a sort key and then in the File List Section, select the files contained in the desired group.

To move to the previous/next group, press the

(REW) or

(FF) button.

Press the TOOLS button.

Press the ▲ or ▼ button to select Play Current Group, then press the ENTER

button.

The music files in the sorting group including the selected file are played.

Playingtheselectedmusicles

1. Press the ▼ button to select the File List Section.

Press the ◄ or ► button to select the desired music file.

Press the Yellow button.

Repeat the above operation to select multiple music files.

The

appears to the left of the selected music file.

To deselect all selected files, press the TOOLS button and select Deselect All.

Press the

∂

(Play)/ENTER

button.

The selected files will be played.

●

Pause◀▶Previous/Next

Tools

Return

SUM

ILoveYou

HaHaHaWay

▶00:00:04/00:04:043/37

[6000-NA]BN68-02112C-Eng.indb 48 2009-03-30 �� 2:22:43

English - 49

Music Play option Menu

Music Play Option Menu

RepeatMode→On/Off

You can play music files repeatedly.

Picture Setting / Sound Setting

You can configure the picture and sound settings.

Information

The music file information is displayed.

Safe Remove

You can remove the device safely from the TV.

❑

Sorting the Movie List

You can sort movies in the Movie List by a particular standard.

Press the MEDIA.P button.

Press the ◄ or ► button to select Movie, then press the ENTER

button.

Press the ▲ button to move to the Sort key Section.

Press the ◄ or ► button to select a sorting standard. (Basic View, Timeline,

Title, Folder, Preference)

The movie files are sorted according to the newly selected sorting standard.

Press the

∂

(Play)/ENTER

button to play the movie in the order selected.

Movie information is automatically set. You can change the preference.

Basic View

Shows the folders of the USB memory device. If you select a folder and press the ENTER

button, only the movie files

contained in the selected folder are displayed.

When sorted according to the Basic View, you cannot set Favorite files.

Timeline

Sorts movies by date. It sorts by year and month from the earliest movie.

Title

Sorts and displays the movie titles in symbol/number/alphabet/special order.

Folder

If there are many folders in USB, the movies files are shown in order in each folder. The movie file in the Root folder is shown first

and the others are shown in alphabetical order by name.

Preference→

FFF

Sorts movies by preference. (Favorite) You can change the movie preferences.

Changing the Favorites Setting

Select the desired movie file in the File List Section, then press the Green button repeatedly until the desired setting appears.

Up to 3 stars can be selected.

The stars are for grouping purposes only. For example, the 3 star setting does not have any priority over the one star setting.

❑

RepeatMode ◀On▶

PictureSetting

SoundSetting

Information

SafeRemove

Move

Adjust

Exit

Tools

SUM Device

FavoritesSetting Select

Tools

Return

Preference

BasicView

Timeline

Folder

Title

ABCD.avi

1235.avi

1236.avi

1237.avi

1233.avi

1232.avi

1231.avi

5/15

[6000-NA]BN68-02112C-Eng.indb 49 2009-03-30 �� 2:22:44

English - 50

Movie List Option Menu

1. Press the MEDIA.P button.

Press the ◄ or ► button to select Movie, then press the ENTER

button.

Press the ◄ or ► button to select the desired Movie file.

Selecting Multiple Movie Files

Press the◄ or ► button to select the desired movie file. Then press the

Yellow button.

Repeat the above operation to select multiple movie files.

The mark

appears to the selected movie file.

Press the TOOLS button.

The option menu changes according to the current status.

Play Current Group

Using this menu, you can only play movie files in the currently selected sorting group.

Deselect All (When at least one file is selected)

You can deselect all files.

The

mark indicating the corresponding file is selected is hidden.

Information

The movie file information including the name, the size, the date modified and the path

is displayed.

Press the INFO button to viewing the information.

Safe Remove

You can remove the device safely from the TV.

Playing a Movie File

Playingamoviele

1. Press the ▼ button to select the File List Section.

Pressing the ◄ or ► button to select a movie file to be played.

Press the

∂

(Play)/ENTER

button.

The selected file is played.

The selected file is displayed at the top with its playing time.

The playing duration of a movie file may be displayed as ‘00:00:00’ if its

playing time information is not found at the start of the file.

You can watch exciting gaming multimedia files, but the gaming function is not

supported.



❑

SUM Device

FavoritesSetting Select

Tools

Return

Preference

BasicView

Timeline

Folder

Title

ABCD.avi

1235.avi

1236.avi

1237.avi

1233.avi

1232.avi

1231.avi

5/15

PlayCurrentGroup

Information

SafeRemove

Pause◀▶Jump

Tools

Return

SUM

ABC.avi

▶

00:00:01/00:05:303/37

[6000-NA]BN68-02112C-Eng.indb 50 2009-03-30 �� 2:22:45

English - 51

Supported Subtitle Formats

Name File extension Format

MPEG-4 time-based text .ttxt XML

SAMI .smi HTML

SubRip .srt string-based

SubViewer .sub string-based

Micro DVD .sub or .txt string-based

Supported Movie Formats

File extension Container Video Decoder Audio codec Resolution

*.avi AVI

Divx 3.11 / 4.x / 5.1 / 6.0

MP3

AC3

LPCM

ADPCM

720x576

XviD 1920x1080

H.264 BP / MP / HP 1920x1080

MPEG4 SP / ASP 1920x1080

Motion JPEG 800x600

*.mkv MKV

Divx 3.11 / 4.x / 5.1 / 6.0

MP3

AC3

LPCM

ADPCM

720x576

XviD 1920x1080

H.264 BP / MP / HP 1920x1080

MPEG4 SP / ASP 1920x1080

Motion JPEG 800x600

*.asf ASF

Divx 3.11 / 4.x / 5.1 / 6.0

MP3

AC3

LPCM

ADPCM

WMA

720x576

XviD 1920x1080

H.264 BP / MP / HP 1920x1080

MPEG4 SP / ASP 1920x1080

Motion JPEG 800x600

*.wmv ASF VC1 WMA 1920x1080

*.mp4

MP4

(SMP4)

H.264 BP / MP / HP

MP3

ADPCM

AAC

1920x1080

MPEG4 SP / ASP 1920x1080

XVID 1920x1080

*.3gp 3GPP

H.264 BP / MP / HP

ADPCM

AAC

1920x1080

MPEG4 SP / ASP 1920x1080

*.vro

VRO

VOB

MPEG2 AC3

MPEG

LPCM

1920x1080

MPEG1 1920x1080

*.mpg

*.mpeg

MPEG1 AC3

MPEG

PCM

1920x1080

MPEG2 1920x1080

*.ts

*.tp

*.trp

MPEG2

AAC

MP3

1920x1080

H.264 1920x1080

VC1 1920x1080

[6000-NA]BN68-02112C-Eng.indb 51 2009-03-30 �� 2:22:45

English - 52

Video Play Control Buttons

Button Operations

ENTER

Play/Pause the movie file

∂

Play the movie file

∑

Pause the movie file

TOOLS Run various functions from the Movie menus.

∫

Exit play mode and return to the movie list.

◄ / ► Skip forwards or backwards through the movie file.

▲ / ▼ Move to the first/last of the file.

Play the file at double speed. This function may not be supported depending on the movie file.

Playing the movie group

1. Press the ▲ button to move to the Sort key Section.

Press the ◄ or ► button to select a sorting standard.

Press the ▼ or ENTER

button to move to the Group List Section.

Press the

∂

(Play) button. Only the files of the selected group will start playing.

Alternatively

Select a Sort key and then in the File List Section, select the files contained in the desired group.

To move to the previous/next group, press the

(REW) or

(FF) button.

Press the TOOLS button.

Press the ▲ or ▼ button to select Play Current Group, then press the ENTER

button.

The movie files in the sorting group including the selected file are played.

Playingtheselectedmovieles

1. Press the ▼ button to select the File List Section.

Press the ◄ or ► button to select the desired movie file.

Press the Yellow button.

The

mark appears to the left of the selected movie file.

To deselect all selected files, press the TOOLS button and select Deselect All.

Repeat the above operation to select multiple movie files.

Press the

∂

(Play)/ENTER

button.

Only the selected file is played.

Playing movie continuously (Resume Play)

If you exit the playing movie function, the movie can be played later from the point where it was stopped.

Select the movie file you want to play continuously by pressing the ◄ or ► button to select it from the File List Section.

Press the

∂

(Play)/ENTER

button.

Select Play Continuously (Resume Play) by pressing the Blue button.

The Movie will begin to play from where it was stopped.

If Continuous Movie Play Help function is set On in the Setup menu, a pop-up message will appear when you resume

play a movie file.

●

[6000-NA]BN68-02112C-Eng.indb 52 2009-03-30 �� 2:22:45

English - 53

Movie Play Option Menu

RepeatMode→On/Off

You can play movie files repeatedly.

Picture Setting / Sound Setting

You can configure the picture and sound settings.

Picture Size

Fit

Play video at the TV screen size.

Original

Play video at the original size.

Caption Setting

You can set the captions for the movie.

Caption→On/Off

You can turn the captions for the movie on or off.

CaptionSize→Small/Standard/Large

You can change the font size of the captions.

Caption Sync

You can adjust the caption sync.

Caption Sync Reset

You can reset the adjusted caption sync.

Information

The movie file information is displayed.

Safe Remove

You can remove the device safely from the TV.

❑

■

❑

■

❑

RepeatMode ◀On▶

PictureSetting

SoundSetting

PictureSize : Fit

CaptionSetting

Information

SafeRemove

Move

Adjust

Exit

Tools

[6000-NA]BN68-02112C-Eng.indb 53 2009-03-30 �� 2:22:45

English - 54

Using the Setup Menu

Setup displays the user settings of the Media Play menu.

1. Press the MEDIA.P button.

Press the ◄ or ► button to select Setup, then press the ENTER

button.

3. Press the ▲ or ▼ button to select the desired option.

Press the ◄ or ► button to select the desired option.

To exit Media Play mode, press the MEDIA.P button on the remote control.

Use Color View → On / Off

You can select sorting photos by Color. If this option is set to On, the loading time may

be increased to collect Color information from the photos.

Continuous Movie Play Help → On / Off

Select to display the help pop-up message for continuous movie playback.

Get DivX® VOD registration code

Shows the registration code authorized for the TV. If you connect to the DivX web site

and register the registration code with a personal account, you can download the VOD

registration file.

If you play the VOD registration using Media Play, the registration is completed.

For more information on DivX® VOD, visit www.DivX.com.

Get DivX® VOD deactivation code

When DivX® VOD is not registered, the registration deactivation code is displayed.

If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.

Screen Saver Run Time → 4 hours / 8 hours / 10 hours

Select to set the waiting time before the screen saver appears.

Information

Select to viewing the information of the connected device.

Safe Remove

You can remove the device safely from the TV.

■

851.86MB/993.02MB Free

Photo

SUM

Device

SETUP

Exit

Music Movie Setup

Use Color View ◀ Off ▶

Continuous Movie Play Help On

Get DivX(R) VOD registration code

Get DivX(R) VOD deactivation code

Screen Saver Run Time

4 hours

Information

Safe Remove

Move

Adjust

Return

If this is set to ON, the loading time increases for collecting the Color

information.

SUM Device

BN68-02112C-Eng-2.indd 54 2009-03-31 �� 11:49:42

English - 55

ANYNET

Connecting Anynet

Devices

What is Anynet

Anynet

is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s

remote. The Anynet

system can be used only with Samsung devices that have the Anynet

feature. To be sure your Samsung

device has this feature, check if there is an Anynet

logo on it.

To connect to a TV

1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet

device using an

HDMI cable.

To connect to Home Theater

1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet

device using an

HDMI cable.

2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet

device using an HDMI

cable.

Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on

the Home Theater.

When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the

Home Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the

DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or

Home Theater, not the TV.

Connect only one Home Theater.

You can connect an Anynet

device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet

functions.

Anynet

works when the AV device supporting Anynet

is in the Standby or On status.

Anynet

supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

Anynet

Device 1

HDMI 1.3 Cable

HDMI 1.3 CableHDMI 1.3 Cable

HDMI 1.3

Cable

Anynet

Device 2 Anynet

Device 3 Anynet

Device 4

Anynet

Device 1

HDMI 1.3 Cable

Optical

Cable

Anynet

Device 2 Anynet

Device 3 Anynet

Device 4

Home Theater

[6000-NA]BN68-02112C-Eng.indb 55 2009-03-30 �� 2:22:46

English - 56

Setting Up Anynet

Press the TOOLS button to display the Tools menu. You can also display Anynet

by selecting Tools→Anynet

(HDMI-CEC).

Setup

Anynet

(HDMI-CEC)→Off/On

To use the Anynet

Function, Anynet

(HDMI-CEC) must be set to On.

When the Anynet

(HDMI-CEC) function is disabled, all the Anynet+ related operations

are deactivated.

AutoTurnOff→No/Yes

Setting an Anynet

Device to turn Off automatically when the TV is turned Off.

The active source on the TV remote must be set to TV to use the Anynet

function.

If you set Auto Turn Off to Yes, connected external devices are also turned off when the

TV is turned off. If an external device is still recording, it may or may not turn off.

Switching between Anynet

Devices

1. Press the TOOLS button. Press the ENTER

button to select Anynet

(HDMI-CEC).

Press the ▲ or ▼ button to select Device List, then press the ENTER

button.

Anynet

devices connected to the TV are listed.

If you cannot find a device you want, press the red button to scan for devices.

Press the ▲ or ▼ button to select a particular device and press the ENTER

button. It

is switched to the selected device.

Only when you set Anynet

(HDMI-CEC) to On in the Application menu, the Device

List menu appears.

Switching to the selected devices may take up to 2 minutes. You cannot cancel the

operation during the switching operation.

The time required to scan for devices is determined by the number of connected devices.

When the device scan is complete, the number of devices found are not displayed.

Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to

the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.

If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet

function. Make sure to

switch to an Anynet

device by using the Device List.

Anynet

The Anynet

menu changes depending on the type and status of the Anynet

devices connected to the TV.

Anynet

Menu Description

View TV Anynet

mode changes to TV broadcast mode.

Device List Shows the Anynet

device list.

(device_name) MENU

Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu

of the DVD recorder will appear.

(device_name) INFO

Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the

play menu of the DVD recorder will appear.

Recording: (*recorder)

Starts recording immediately using the recorder. (This is only available for devices that

support the recording function.)

Stop Recording: (*recorder) Stops recording.

Receiver Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is

connected, it will be represented as (*device_name).

❑

■

Move

Enter

Return

Anynet

(HDMI-CEC) :On▶

Setup

AutoTurnOff :Yes

MediaPlay(USB)

Anynet

(HDMI-CEC)

InfoLink

Application

Move

Enter

Return

Anynet

(HDMI-CEC) :On

Setup

AutoTurnOff :Yes▶

Move

Enter

Return

ViewTV

DeviceList

Recording:DVDR

DVDRMENU

DVDRINFO

Receiver:Off

Setup

[6000-NA]BN68-02112C-Eng.indb 56 2009-03-30 �� 2:22:47

English - 57

TV Remote Control Buttons Available in Anynet

Mode

Device Type Operating Status Available Buttons

Anynet

Device

After switching to the device, when the menu

of the corresponding device is displayed on

the screen.

Numeric buttons

▲/▼/◄/►/ ENTER

buttons

Color buttons / EXIT button

After switching to the device, while playing a

file

(Backward search) /

(Forward search) /

∫

(Stop) /

∂

(Play) /

∑

(Pause)

Device with built-in

Tuner

After switching to the device, when you are

watching a TV program

button

Audio Device When Receiver is activated

/ MUTE button

The Anynet

function only works when the active source on the TV remote control is set to TV.

The

∏

button works only while in the recordable state.

You cannot control Anynet

devices using the buttons on the TV. You can control Anynet

devices only using the TV remote

control.

The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet

device.

The Anynet

functions do not operate with other manufacturers’ products.

The

operations may differ depending on the device.

Recording

You can make a recording of a TV program using a Samsung recorder.

Press the TOOLS button. Press the ENTER

button to select Anynet

(HDMI-CEC).

Press the ▲ or ▼ button to select Recording Immediately and press the ENTER

button. Recording begins.

When there is more than one recording device

When multiple recording devices are connected, the recording devices are listed.

Press the ▲ or ▼ button to select a recording device and press the ENTER

button. Recording begins.

When the recording device is not displayed select Device List and press the Red

button to search devices

Press the EXIT button to exit.

You can record the source streams by selecting Recording: (device_name).

Pressing the

∏

button will record whatever you are currently watching. If you are watching video from another device,

the video from the device is recorded.

Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an

antenna to a recording device, refer to the recording device’s users manual.

Listening through a Receiver (Home Theater)

You can listen to sound through a receiver instead of the TV speaker.

Press the TOOLS button. Press the ENTER

button to select Anynet

(HDMI-CEC).

Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.

Press the EXIT button to exit.

If your receiver supports audio only, it may not appear in the device list.

The receiver will work when you have properly connected the optical in jack of the

receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.

When the receiver (home theater) is set to On, you can hear sound output from

the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send

out 5.1 channel sound to the Home Theater receiver. When the source is a digital component such as a DVD and is

connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.

If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power

failure), the Speaker Select may be set to External Speaker when you turn the TV on again.

Move

Enter

Return

ViewTV

DeviceList

Recording:DVDR

DVDRMENU

DVDRINFO

Receiver:Off

Setup

Move

Enter

Return

ViewTV

DeviceList

Recording:DVDR

DVDRMENU

DVDRINFO

Receiver:Off

Setup

[6000-NA]BN68-02112C-Eng.indb 57 2009-03-30 �� 2:22:47

English - 58

Troubleshooting for Anynet

Problem Possible Solution

Anynet

does not work. Check if the device is an Anynet

device. The Anynet

system supports Anynet

devices only.

Connect only one receiver (home theater).

Check if the Anynet

device power cord is properly connected.

Check the Anynet

device’s Video/Audio/HDMI 1.3 cable connections.

Check whether Anynet

(HDMI-CEC) is set to On in the Anynet

setup menu.

Check whether the TV remote control is in TV mode.

Check whether it is Anynet

exclusive remote control.

Anynet

doesn’t work in certain situations. (Searching channels, Operating Media Play, Plug &

Play, etc.)

When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or

turn your TV off and on again.

Check if the Anynet

Function of Anynet

device is set on.

●

I want to start Anynet

. Check if the Anynet+ device is properly connected to the TV and check if the Anynet

(HDMI-

CEC) is set to On in the Anynet

Setup menu.

Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to

show the Anynet

menu and select a menu you want.

●

I want to exit Anynet

. Select View TV in the Anynet

menu.

Press the SOURCE button on the TV remote control and select a device other than Anynet

devices.

Press

, CH LIST, PRE-CH, and FAV.CH to change the TV mode. (Note that the

channel button operates only when a tuner-embedded Anynet

device is not connected.)

●

The message ‘Connecting to

Anynet+ device...’ appears on

the screen.

You cannot use the remote control when you are configuring Anynet

or switching to a view

mode.

Use the remote control when the Anynet

setting or switching to view mode is complete.

●

The Anynet

device does not

play.

You cannot use the play function when Plug & Play is in progress.

●

The connected device is not

displayed.

Check whether or not the device supports Anynet

functions.

Check whether or not the HDMI 1.3 cable is properly connected.

Check whether Anynet

(HDMI-CEC) is set to On in the Anynet

setup menu.

Search Anynet

devices again.

You can connect an Anynet

device using the HDMI 1.3 cable only. Some HDMI cables may not

support Anynet

functions.

If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord

or a power failure, please repeat the device scan.

●

The TV program cannot be

recorded.

Check whether the antenna jack on the recording device is properly connected.

●

The TV sound is not output

through the receiver.

Connect the optical cable between TV and the receiver.

●

[6000-NA]BN68-02112C-Eng.indb 58 2009-03-30 �� 2:22:47

English - 59

InfoLink

Using InfoLink

You can view news, stock market and weather information services using SAMSUNG’s InfoLink

service.

For more information on how to configure your network, refer to ‘Setting the Network’.

(see pages 30~35)

Information provided by USA TODAY via InfoLink is for the United States only. Information

for other countries is not provided.

Activating InfoLink

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select

Application, then press the ENTER

button.

Press the ▲ or ▼ button to select InfoLink, then press the ENTER

button.

Press the ◄ or ► button to select a service (Weather, News, Stocks or Setup) and press

the ENTER

button.

Press the INFO.L button on the remote control to display the InfoLink menu.

Using the Weather Service

1. Press the INFO.L button on the remote control.

Press the ◄ or ► button to move to the Weather service and press the ENTER

button.

Set up the Region

3. Press Yellow button. Input the postal (zip) code of the region by pressing the number

buttons on the remote, then pres s the ENTER

button.

You can check the weather of the selected region.

Set up Weather Option

4. Press the Red button while using the service to change the Weather service option.

Press ▲ or ▼ button and select Weather option.

To exit the Weather service, press the Blue button.

To exit the InfoLink service, press the EXIT button.

MediaPlay(USB)

Anynet

(HDMI-CEC)

InfoLink

Application

Weather L Move R Return

Washington

59°F

Options

Today’s Weather

Weekly Forecast

E Select R Return

Weather L Move e Exit

[6000-NA]BN68-02112C-Eng.indb 59 2009-03-30 �� 2:22:48

English - 60

Using the News Service

The news provider may be changed in the future.

Press the INFO.L button on the remote control.

Press the ◄ or ► button to move to the News service and press the ENTER

button.

Press the ENTER

button to view the detailed article.

Press the ▲ or ▼ button to view the previous or next article.

Press the Red button while using the service to change the News service Option.

Press ▲ or ▼ button and select News service option.

The News service option changes depending on the provided web service.

To exit the News service, press the Blue button.

To exit the InfoLink service, press the EXIT button.

Using the Stock Service

1. Press the INFO.L button on the remote control.

Press the ◄ or ► button to move to the Stocks service and press the ENTER

button.

Press the Red button while using the service to change the Stocks service option.

Press ▲ or ▼ button and select Stocks service option, then press the ENTER

button.

Favorite Stocks

The Favorite stock information is displayed. You can set up the Favorite Stocks by pressing the

Yellow button.

Market Summary

Dow Jones, NASDAQ and S&P 500 are toggled and the entire index, amount of up or down, and % are displayed.

Stocks & News

The Favorite stock information and Dow Jones, NASDAQ and S&P 500 index and Financial news are displayed.

Stock quotes delayed at least 15 minutes.

To exit the Stocks service, press the Blue button.

To exit the InfoLink service, press the EXIT button.

Setting Favorite Stocks Items

1. Press the Yellow button when Favorite Stocks or Stocks & News is selected. The Set

Favorite Stocks screen appears.

Press ◄ or ► button to move to the Category. Press the ▲ or ▼ button to select a

Category. Press the ENTER

button.

Press the ▲ or ▼ button to select a stock item and press the ENTER

button.

The selected stock is set as a Favorite Stock.

The

mark will appear to the left of the stock name.

Press the ENTER

button again to cancel the setting. The mark will disappear.

To cancel all selections, press the Green button.

Pressing the Red button toggles between NYSE and NASDAQ.

To finish the settings, press the RETURN button.

■

Reset

Move

Select

Return

NoFavoriteStocks

NYSE   3/1844

A-B A AGILENTTECHNOLGIES,INC.

C-E

AA ALCOAINC.

F-H

AAI AIRTRANHOLDING,INC

I-K

AAR AMRCORPORATION

L-N

AAB ABBASEABROWNBOVERILT..



NASDAQ

News L Move e Exit

Options

News

Money

Politics

Life

Sports

World

E Select R Return

GM turns 100 with focus on future

News

No Favorite Stocks

Quotes delayed at least 15 minutes.

Data provided by interastive Data.

Options

Favorite Stocks

Market Summary

Stocks & News

Stocks L Move e Exit

E Select R Return

[6000-NA]BN68-02112C-Eng.indb 60 2009-03-30 �� 2:22:49

English - 61

InfoLink Setup

1. Press the INFO.L button on the remote control.

Press the ◄ or ► button to select Setup, then press the ENTER

button.

Press the ▲ or ▼ button to select the desired option, then press the ENTER

button.

To exit the Setup service, press the RETURN button.

To exit the InfoLink service, press the EXIT button.

Auto Launch

Determines whether to launch InfoLink automatically when the TV is turned on. You can select either Off or On.

Display Time

Determines the time to display the news service on the TV screen. You can select 4 Hours, 8 Hours, 10 Hours, or Always.

Font Size

You can select letter size Standard or Large through InfoLink service.

Background Color

You can select the Background Color of InfoLink service. The color is applied to each service, option and setup window.

InfoLink’s Position

You can set the position of each InfoLink service on the screen. You can select from six preset InfoLink positions (Position

1~Position 6).

ALL THE MATERIALS AVAILABLE THROUGH INFOLINK [INFOLINK CONTENT’] ARE THE PROPERTY OF THE

ORIGINATOR OF THE CONTENT [“CONTENT OWNER’] AND/OR ITS AFFILIATES OR LICENSORS, AND ARE

PROTECTED BY COPYRIGHT, TRADEMARK, AND OTHER INTELLECTUAL PROPERTY LAWS. ALL INFOLINK CONTENT

IS PROVIDED SOLELY FOR YOUR PERSONAL NONCOMMERCIAL USE. YOU MAY NOT USE ANY INFOLINK CONTENT

IN A MANNER THAT CONSTITUTES AN INFRINGEMENT OF THE CONTENT OWNERS’ RIGHTS OR THAT HAS NOT

BEEN AUTHORIZED BY THE CONTENT OWNER.

MORE SPECIFICALLY, UNLESS EXPLICITLY AUTHORIZED IN THIS DISCLAIMER OR BY THE CONTENT OWNER,

YOU MAY NOT MODIFY, COPY, REPRODUCE, REPUBLISH, UPLOAD, POST, TRANSMIT, TRANSLATE, SELL, CREATE

DERIVATIVE WORKS, EXPLOIT, OR DISTRIBUTE IN ANY MANNER OR MEDIUM (INCLUDING BY EMAIL OR OTHER

ELECTRONIC MEANS) ANY INFOLINK CONTENT OR ANY OTHER MATERIAL FROM THE INFOLINK SERVICE.

CONTENT PROVIDED CONTENT OWNERS IN CONNECTION WITH THE INFOLINK SERVICE MAY BE TIME-DELAYED AS

SPECIFIED BY THE CONTENT OWNER AND/OR ITS AFFILIATES.

INFOLINK IS PROVIDED THROUGH AGREEMENT BETWEEN SAMSUNG AND THE CONTENT OWNER. INFOLINK MAY

BE TERMINATED OR INTERUPTED AT ANY TIME BY EITHER SAMSUNG OR THE CONTENT PROVIDER OR THROUGH

TERMINATION OF THE AGREEMENT BETWEEN THEM. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE,

SHALL SAMSUNG OR THE CONTENT PROVIDER BE HELD LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR

ANY OTHER DAMAGES WHATSOEVER ARISING OUT OF, OR IN CONNECTION WITH, SUCH TERMINATION OR

INTERUPTION.

SINCE CONTENT TRANSMITTED VIA INFOLINK IS RECEIVED BY MEANS OF NETWORKS AND TRANSMISSION

FACILITIES OVER WHICH SAMSUNG HAS NO CONTROL, SAMSUNG EXPRESSLY DISCLAIMS ANY RESPONSIBILITY

OR LIABILITY FOR ANY INTERRUPTION OR SUSPENSION OF INTERLINK SERVICE OR FOR THE ABSENCE OF

CONTENT RESULTING THEREFROM.

INFORMATION IN THE INFOLINK IS PROVIDED ‘AS IS,’ AND CONSEQUENTLY, SAMSUNG DOES NOT WARRANT

THE INFORMATION SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PARTICULAR PURPOSE; AND

SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF

ANY INFORMATION OR DATA MADE AVAILABLE THROUGH INFOLINK FOR ANY PARTICULAR PURPOSE AND UNDER

NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE HELD LIABLE, WHETHER IN CONTRACT

OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY

FEES, EXPENSES, OR ANY OTHER DAMAGES WHATSOEVER ARISING OUT OF, OR IN CONNECTION WITH, ANY

INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF INFOLINK BY YOU OR ANY THIRD PARTY, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

■

Move

Select

Return

InfoLink’sSetup

AutoLaunch :Off

DisplayTime :4Hours

FontSize :Standard

BackgroundColor :Black

InfoLink’sPosition

[6000-NA]BN68-02112C-Eng.indb 61 2009-03-30 �� 2:22:49

English - 62

RECOMMENDATIONS

Troubleshooting

If the TV seems to have a problem, rst try this list of possible problems and solutions. If none of these troubleshooting tips apply,

call Samsung customer service at 1-800-SAMSUNG.

Problem Possible Solution

Poor picture. Try another channel. / Adjust the antenna. / Check all wire connections.

Poor sound quality. Try another channel. / Adjust the antenna.

No picture or sound. Try another channel. / Press the SOURCE button.

Make sure the TV is plugged in. / Check the antenna connections.

No sound or sound is too low at

maximum volume.

First, check the volume of units connected to your TV (digital broadcasting receiver, DVD,

cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.

Picture rolls vertically. Check all wire connections.

There is a problem with the picture Run the Picture test in the Self diagnostic menu.

There is a problem with the sound Run the Sound test in the Self diagnostic menu.

The TV operates erratically. Unplug the TV for 30 seconds, then try operating it again.

The TV won’t turn on. Make sure the wall outlet is working.

Remote control malfunctions. Replace the remote control batteries.

Clean the upper edge of the remote control (transmission window).

Check the battery terminals.

‘Check signal cable’ message. Ensure that the signal cable is rmly connected to the PC source.

‘Not Supported Mode’ message. Check the maximum resolution and connected device’s Video frequency.

Compare these values with the data in the Display Modes.

Digital broadcasting screen

problem.

Please check the digital signal strength and input antenna.

The image is too light or too dark. Adjust the Brightness and Contrast. / Adjust the Fine tuning.

Black bars on the screen. Make sure the broadcast you’re receiving is High Denition (HD).

HD channels sometimes broadcast Standard Denition (SD) programming, which can

cause black bars.

Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.

Picture has a Red/Green or Pink

tint.

Make sure the Component cables are connected to the correct jacks.

Closed Captioning not working. If you are using a Cable/Satellite box, you must set Closed Captioning on the box, not

your TV.

Snowy picture. Your cable box may need a rmware upgrade. Please contact your Cable company.

Ghosting on picture. This is sometimes caused by compatibility issues with your cable box.

Try connecting Component cables instead.

Horizontal bars appear to icker,

jitter or shimmer on the image.

Adjust the Coarse tuning and then adjust the Fine tuning.

Vertical bars appear to icker, jitter

or shimmer on the image.

Adjust the Coarse tuning and then adjust the Fine tuning.

Screen is black and power indicator

light blinks steadily.

On your computer check: Power, Signal Cable.

The TV is using its power management system.

Move the computer's mouse or press any key on the keyboard.

[6000-NA]BN68-02112C-Eng.indb 62 2009-03-30 �� 2:22:49

English - 63

Problem Possible Solution

Image is not stable and may

appear to vibrate when you have

a computer connected to the PC

input.

If the setting is not correct, use your computer utility program to change the display

settings.

Your TV supports multiscan display functions within the following frequency domain:

- Horizontal frequency (KHz): 30~60

- Vertical frequency (Hz): 60~75

- PC Maximum refresh rate (at 60 Hz): 1920 x 1080

Image is not centered on the

screen.

Adjust the horizontal and vertical position.

The screen position must be adjusted on the output source (i.e. STB) with a digital signal.

The picture appears distorted in the

corner of the screen.

If Screen Fit is selected with some external devices, the picture may appear distorted in

the corner of the screen. This symptom is caused by the external devices, not TV.

The ‘Resets all settings to the

default values.’ message appears.

This appears when you press and hold the EXIT button for a while. The product settings

are reset to the factory defaults.

This TFT LED panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce.

However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the

product.

Installing the Stand

Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using

the screws. Applicable to models (UN32B6000) only.

Attach your LED TV to the stand.

Two or more people should carry the TV.

Make sure to distinguish between the front and back of the stand when

attaching it.

To make sure the TV is installed on the stand at a proper level, do not apply

excess downward pressure to the upper left of right sides of the TV.

Fasten screws at position

and then fasten screws at position

Stand the product up and fasten the screws. If you fasten the screws with the

LED TV placed down, it may lean to one side.

Disconnecting the Stand

1. Remove screws from the back of the TV.

Separate the stand from the TV.

Two or more people should carry the TV.

Cover the bottom hole with the cover.

Front

Back

[6000-NA]BN68-02112C-Eng.indb 63 2009-03-30 �� 2:22:51

English - 64

Assembling the Cables

Stand Type

Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent stand.

Wall-Mount Type

❑

[6000-NA]BN68-02112C-Eng.indb 64 2009-03-30 �� 2:22:56

English - 65

Wall Mount Kit Specifications (VESA)

Install your wall mount on a solid wall perpendicular to the  oor. When attaching to

other building materials, please contact your nearest dealer. If installed on a ceiling or

slanted wall, it may fall and result in severe personal injury.

Standard dimensions for wall mount kits are shown in the table above.

When purchasing our wall mount kit, a detailed installation manual and all parts

necessary for assembly are provided.

Do not use screws longer than the standard dimension, as they may cause

damage to the inside of the TV set.

For wall mounts that do not comply with the VESA standard screw speci cations,

the length of the screws may differ depending on their speci cations.

Do not use screws that do not comply with the VESA standard screw

speci cations.

Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

Samsung is not liable for product damage or personal injury when a non-VESA or non-speci ed wall mount is used or the

consumer fails to follow the product installation instructions.

Our 57” and 63” models do not comply with VESA Speci cations. Therefore, you should use our dedicated wall mount kit for

this model.

Do not exceed 15 degrees tilt when mounting this TV.

Product Family inches VESA Spec. (A * B) Standard Screw Quantity

LED-TV

19~22 100 X 100

23~29 200 X 100

30~40 200 X 200 M6

46~55 400 X 400

M857~70 800 X 400

80~ 1400 X 800

PDP-TV

42~50 400 X 400

M8 4

58~63 600 X 400

70~ 800 X 400

80~ 1400 X 800

LFD

30~39 200 X 200 M6

40~52 400 X 400

M855~70 800 X 400

70~ 1400 X 800

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

[6000-NA]BN68-02112C-Eng.indb 65 2009-03-30 �� 2:22:57

English - 66

Preparing before installing Wall-Mount

To install a wall-mount from another manufacturer, use the Holder-Ring 1.

Anti-Theft Kensington Lock

The Kensington Lock is a device used to physically fix the system when using it in

a public place. The appearance and locking method may differ from the illustration

depending on the manufacturer.

Refer to the manual provided with the Kensington Lock for proper use.

The locking device has to be purchased separately.

The location of the Kensington Lock may be different depending on its model.

1. Insert the locking device into the Kensington slot on the LED TV (1) and turn it in

the locking direction (2).

2. Connect the Kensington Lock cable (3).

3. Fix the Kensington Lock to a desk or a heavy stationary object.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

Install the product so the required distances shown in the figure are kept.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the

product falling.

If you use parts provided by another manufacturer, it may result in a problem with the product or fire due to an increase in

the internal temperature of the product due to poor ventilation.

The appearance may differ depending on the product.

When installing the product with a stand When installing the product with a wall-mount

10 cm



[6000-NA]BN68-02112C-Eng.indb 66 2009-03-30 �� 2:22:59

English - 67

Securing the TV to a Wall or Cabinet

[

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do

not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death.

Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device

for safety purposes, as follows.

Components (Depending on the model):

To prevent the TV from falling:

1. Remove the screw from the top right of the rear cover of the TV. Fasten the TV-Holder to the TV by fastening Screw

(for

 xing the TV) into the screw hole.

Make sure to only use the supplied screws.

2. Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the

screws fastened on the wall or cabinet so that the TV is  xed.

Purchase the screws to be used on the wall or cabinet separately.

Install the TV close to the wall so that it does not fall.

When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.

Con rm that the cord or link does not come loose.

Before moving the TV, separate the connected cord  rst.

3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any

doubt about the security of your connections, contact a professional installer.



cabinet

TV-Holder

Screw

(M8xL19)

[6000-NA]BN68-02112C-Eng.indb 67 2009-03-30 �� 2:23:00

English - 68

Specifications

Model Name UN32B6000

Screen Size

(Diagonal)

32 inches

(31.5 inches measured diagonally)

PC Resolution

(Optimum)

1920 x 1080 @ 60 Hz

Sound

(Output) 10W x 2

Dimensions (WxDxH)

Body

With stand

31.5 x 1.2 x 20.5 (inch) / 799 x 29.9 x 520.9 (mm)

31.5 x 10.0 x 22.8 (inch) / 799 x 255 x 579.9 (mm)

Weight

Without Stand

With Stand

21.9 lbs / 9.95 Kg

30.3 lbs / 13.75 Kg

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

Stand Swivel

(Left / Right) -20˚ ~ 20˚

Model Name UN40B6000

Screen Size

(Diagonal)

40 inches

(40.0 inches measured diagonally)

PC Resolution

(Optimum) 1920 x 1080 @ 60 Hz

Sound

(Output)

10W x 2

Dimensions (WxDxH)

Body

With stand

38.7 x 1.2 x 24.8 (inch) / 983 x 29.9 x 631 (mm)

38.7 x 10.0 x 27.1 (inch) / 983 x 255 x 688 (mm)

Weight

Without Stand

With Stand

32.4 lbs / 14.7 Kg

40.6 lbs / 18.4 Kg

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

Stand Swivel

(Left / Right) -20˚ ~ 20˚

[6000-NA]BN68-02112C-Eng.indb 68 2009-03-30 �� 2:23:00

English - 69

Model Name UN46B6000

Screen Size

(Diagonal)

46 inches

(46.0 inches measured diagonally)

PC Resolution

(Optimum)

1920 x 1080 @ 60 Hz

Sound

(Output) 10W x 2

Dimensions (WxDxH)

Body

With stand

43.9 x 1.2 x 27.8 (inch) / 1129 x 29.9 x 705 (mm)

43.9 x 10.8 x 30.0 (inch) / 1129 x 275 x 763 (mm)

Weight

Without Stand

With Stand

39.7 lbs / 18.0 Kg

50.3 lbs / 22.8 Kg

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

Stand Swivel

(Left / Right) -20˚ ~ 20˚

Model Name UN55B6000

Screen Size

(Diagonal)

55 inches

(54.7 inches measured diagonally)

PC Resolution

(Optimum) 1920 x 1080 @ 60 Hz

Sound

(Output)

15W x 2

Dimensions (WxDxH)

Body

With stand

51.5 x 1.2 x 32.1 (inch) / 1307 x 29.9 x 815 (mm)

51.5 x 12.0 x 34.4 (inch) / 1307 x 305 x 873 (mm)

Weight

Without Stand

With Stand

49.4 lbs / 22.4 Kg

60.8 lbs / 27.6 Kg

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

Stand Swivel

(Left / Right) -20˚ ~ 20˚

Design and specifications are subject to change without prior notice.

This device is a Class B digital apparatus.

For the power supply and Power Consumption, refer to the label attached to the product.

[6000-NA]BN68-02112C-Eng.indb 69 2009-03-30 �� 2:23:00

English - 70

Dimensions

UN32B6000

TOP VIEW

JACK PANEL DETAIL

FRONT VIEW / SIDE VIEW

REAR VIEW

NOTE: All drawings are not necessarily to scale. Some

dimensions are subject to change without prior notice. Refer to

the dimensions prior to performing installation of your TV. Not

responsible for typographical or printed errors.

31.5

26.4

15.5

20.5

22.8

17.5

1.2

10.0

7.9

(200 mm)

7.9 (200 mm)

[6000-NA]BN68-02112C-Eng.indb 70 2009-03-30 �� 2:23:00

English - 71

UN40B6000

TOP VIEW

JACK PANEL DETAIL

FRONT VIEW / SIDE VIEW

REAR VIEW

NOTE: All drawings are not necessarily to scale. Some

dimensions are subject to change without prior notice. Refer to

the dimensions prior to performing installation of your TV. Not

responsible for typographical or printed errors.

38.7

34.9

19.6

24.8

27.1

20.5

1.2

10.0

7.9

(200 mm)

7.9 (200 mm)

[6000-NA]BN68-02112C-Eng.indb 71 2009-03-30 �� 2:23:01

English - 72

UN46B6000

TOP VIEW

JACK PANEL DETAIL

FRONT VIEW / SIDE VIEW

REAR VIEW

NOTE: All drawings are not necessarily to scale. Some

dimensions are subject to change without prior notice. Refer to

the dimensions prior to performing installation of your TV. Not

responsible for typographical or printed errors.

43.9

40.1

22.6

27.8

30.0

21.7

1.2

10.8

15.7

(400 mm)

15.7 (400 mm)

[6000-NA]BN68-02112C-Eng.indb 72 2009-03-30 �� 2:23:01

English - 73

UN55B6000

TOP VIEW

JACK PANEL DETAIL

FRONT VIEW / SIDE VIEW

REAR VIEW

NOTE: All drawings are not necessarily to scale. Some

dimensions are subject to change without prior notice. Refer to

the dimensions prior to performing installation of your TV. Not

responsible for typographical or printed errors.

51.5

47.6

26.8

32.1

34.4

21.7

1.2

12.0

15.7

(400 mm)

15.7 (400 mm)

[6000-NA]BN68-02112C-Eng.indb 73 2009-03-30 �� 2:23:01

This product uses parts of the software from the Independent JPEG Group.

This product uses parts of the software owned by the Freetype Project (www.freetype.org).

This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following

GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@

samsung.com.

GPL software: Linux Kernel, Busybox, Binutils

LGPL software: Glibc, ffmpeg, smpeg, libgphoto, libusb, SDL

GNU GENERAL PUBLIC LICENSE

Version 3, 29 June 2007

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The GNU General Public License is a free, copyleft license for software and other kinds of works.

The licenses for most software and other practical works are designed to take away your freedom to share and change the

works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions

of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General

Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your

programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure

that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or

can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do

these things.

To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore,

you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of

others.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same

freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them

these terms so they know their rights.

Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this

License giving you legal permission to copy, distribute and/or modify it.

For the developers’ and authors’ protection, the GPL clearly explains that there is no warranty for this free software. For both users’

and authors’ sake, the GPL requires that modied versions be marked as changed, so that their problems will not be attributed

erroneously to authors of previous versions.

Some devices are designed to deny users access to install or run modied versions of the software inside them, although the

manufacturer can do so. This is fundamentally incompatible with the aim of protecting users’ freedom to change the software.

The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most

unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems

arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as

needed to protect the freedom of users.

Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and

use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to

a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the

program non-free.

The precise terms and conditions for copying, distribution and modication follow.

TERMS AND CONDITIONS

Denitions.

“This License” refers to version 3 of the GNU General Public License.

“Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.

“The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees”

and “recipients” may be individuals or organizations.

To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than

the making of an exact copy. The resulting work is called a “modied version” of the earlier work or a work “based on” the

earlier work.

A “covered work” means either the unmodied Program or a work based on the Program.

To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable

for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation

includes copying, distribution (with or without modication), making available to the public, and in some countries other

activities as well.

●

[6000-NA]BN68-02112C-Eng.indb 74 2009-03-30 �� 2:23:01

To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with

a user through a computer network, with no transfer of a copy, is not conveying.

An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently

visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work

(except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a

copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list

meets this criterion.

Source Code.

The “source code” for a work means the preferred form of the work for making modications to it. “Object code” means any

non-source

form of a work.

A “Standard Interface” means an interface that either is an ofcial standard dened by a recognized standards body, or, in the

case of interfaces specied for a particular programming language, one that is widely used among developers working in that

language.

The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the

normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable

use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to

the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window

system, and so on) of the specic operating system (if any) on which the executable work runs, or a compiler used to produce

the work, or an object code interpreter used to run it.

The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an

executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not

include the work’s System Libraries, or general-purpose tools or generally available free programs which are used unmodied

in performing those activities but which are not part of the work. For example, Corresponding Source includes interface

denition les associated with source les for the work, and the source code for shared libraries and dynamically linked

subprograms that the work is specically designed to require, such as by intimate data communication or control ow between

those subprograms and other parts of the work.

The Corresponding Source need not include anything that users can regenerate automatically from other parts of the

Corresponding Source.

The Corresponding Source for a work in source code form is that same work.

Basic Permissions.

All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the

stated conditions are met. This License explicitly afrms your unlimited permission to run the unmodied Program. The output

from running a covered work is covered by this License only if the output, given its content, constitutes a covered work.

This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and

propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You

may convey covered works to others for the sole purpose of having them make modications exclusively for you, or provide

you with facilities for running those works, provided that you comply with the terms of this License in conveying all material

for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on

your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material

outside their relationship with you.

Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed;

section 10 makes it unnecessary.

Protecting Users’ Legal Rights From Anti-Circumvention Law.

No covered work shall be deemed part of an effective technological measure under any applicable law fullling obligations

under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting

circumvention of such measures.

When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent

such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any

intention to limit operation or modication of the work as a means of enforcing, against the work’s users, your or third parties’

legal rights to forbid circumvention of technological measures.

Conveying Verbatim Copies.

You may convey verbatim copies of the Program’s source code as you receive it, in any medium, provided that you

conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this

License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence

of any warranty; and give all recipients a copy of this License along with the Program.

You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a

fee.

Conveying Modied Source Versions.

You may convey a work based on the Program, or the modications to produce it from the Program, in the form of source code

under the terms of section 4, provided that you also meet all of these conditions:

a) The work must carry prominent notices stating that you modied it, and giving a relevant date.

b) The work must carry prominent notices stating that it is released under this License and any conditions added under

section 7. This requirement modies the requirement in section 4 to “keep intact all notices”.

–

[6000-NA]BN68-02112C-Eng.indb 75 2009-03-30 �� 2:23:01

c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This

License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its

parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it

does not invalidate such permission if you have separately received it.

d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has

interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.

A compilation of a covered work with other separate and independent works, which are not by their nature extensions of

the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or

distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or

legal rights of the compilation’s users beyond what the individual works permit. Inclusion of a covered work in an aggregate

does not cause this License to apply to the other parts of the aggregate.

Conveying Non-Source Forms.

You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the

machine-readable Corresponding Source under the terms of this License, in one of these ways:

a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied

by the Corresponding Source xed on a durable physical medium customarily used for software interchange.

b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied

by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that

product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the

software in the product that is covered by this License, on a durable physical medium customarily used for software

interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2)

access to copy the Corresponding Source from a network server at no charge.

c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This

alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer,

in accord with subsection 6b.

d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent

access to the Corresponding Source in the same way through the same place at no further charge. You need not require

recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network

server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent

copying facilities, provided you maintain clear directions next to the object code saying where to nd the Corresponding

Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for

as long as needed to satisfy these requirements.

e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and

Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable

portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not

be included in conveying the object code work.

A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for

personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining

whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product

received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the

status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the

product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-

consumer uses, unless such uses represent the only signicant mode of use of the product.

“Installation Information” for a User Product means any methods, procedures, authorization keys, or other information required

to install and execute modied versions of a covered work in that User Product from a modied version of its Corresponding

Source. The information must sufce to ensure that the continued functioning of the modied object code is in no case

prevented or interfered with solely because modication has been made.

If you convey an object code work under this section in, or with, or specically for use in, a User Product, and the conveying

occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in

perpetuity or for a xed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under

this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any

third party retains the ability to install modied object code on the User Product (for example, the work has been installed in

ROM).

The requirement to provide Installation Information does not include a requirement to continue to provide support service,

warranty, or updates for a work that has been modied or installed by the recipient, or for the User Product in which it has

been modied or installed. Access to a network may be denied when the modication itself materially and adversely affects the

operation of the network or violates the rules and protocols for communication across the network.

Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is

publicly documented (and with an implementation available to the public in source code form), and must require no special

password or key for unpacking, reading or copying.

Additional Terms.

“Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its

conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in

this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program,

that part may be used separately under those permissions, but the entire Program remains governed by this License without

regard to the additional permissions.

–

[6000-NA]BN68-02112C-Eng.indb 76 2009-03-30 �� 2:23:01

When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or

from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the

work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give

appropriate copyright permission.

Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the

a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or

b) Requiring preservation of specied reasonable legal notices or author attributions in that material or in the Appropriate

Legal Notices displayed by works containing it; or

c) Prohibiting misrepresentation of the origin of that material, or requiring that modied versions of such material be

marked in reasonable ways as different from the original version; or

d) Limiting the use for publicity purposes of names of licensors or authors of the material; or

e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or

f) Requiring indemnication of licensors and authors of that material by anyone who conveys the material (or modied

versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions

directly impose on those licensors and authors.

All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program

as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a

further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or

conveying under this License, you may add to a covered work material governed by the terms of that license document,

provided that the further restriction does not survive such relicensing or conveying.

If you add terms to a covered work in accord with this section, you must place, in the relevant source les, a statement of the

additional terms that apply to those les, or a notice indicating where to nd the applicable terms.

Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as

exceptions; the above requirements apply either way.

Termination.

You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to

propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses

granted under the third paragraph of section 11).

However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a)

provisionally, unless and until the copyright holder explicitly and nally terminates your license, and (b) permanently, if the

Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder noties you of the

violation by some reasonable means, this is the rst time you have received notice of violation of this License (for any work)

from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.

Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from

you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new

licenses for the same material under section 10.

Acceptance Not Required for Having Copies.

You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered

work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require

acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These

actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you

indicate your acceptance of this License to do so.

10.

Automatic Licensing of Downstream Recipients.

Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify

and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this

License.

An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing

an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party

to that transaction who receives a copy of the work also receives whatever licenses to the work the party’s predecessor in

interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work

from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts.

You may not impose any further restrictions on the exercise of the rights granted or afrmed under this License. For example,

you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not

initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making,

using, selling, offering for sale, or importing the Program or any portion of it.

11.

Patents.

A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is

based. The work thus licensed is called the contributor’s “contributor version”.

A contributor’s “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired

or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its

contributor version, but do not include claims that would be infringed only as a consequence of further modication of the

contributor version. For purposes of this denition, “control” includes the right to grant patent sublicenses in a manner

consistent with the requirements of this License.

–

[6000-NA]BN68-02112C-Eng.indb 77 2009-03-30 �� 2:23:01

Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor’s essential patent

claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version.

In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not

to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To

“grant” such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the

party.

If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not

available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or

other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange

to deprive yourself of the benet of the patent license for this particular work, or (3) arrange, in a manner consistent with the

requirements of this License, to extend the patent license to downstream recipients. “Knowingly relying” means you have

actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient’s use of the

covered work in a country, would infringe one or more identiable patents in that country that you have reason to believe are

valid.

If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance

of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use,

propagate, modify or convey a specic copy of the covered work, then the patent license you grant is automatically extended

to all recipients of the covered work and works based on it.

A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is

conditioned on the non-exercise of one or more of the rights that are specically granted under this License. You may not

convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software,

under which you make payment to the third party based on the extent of your activity of conveying the work, and under which

the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a)

in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in

connection with specic products or compilations that contain the covered work, unless you entered into that arrangement, or

that patent license was granted, prior to 28 March 2007.

Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that

may otherwise be available to you under applicable patent law.

12.

No Surrender of Others’ Freedom.

If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this

License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy

simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not

convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to

whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely

from conveying the Program.

13.

Use with the GNU Affero General Public License.

Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work

licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting

work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of

the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as

such.

14.

Revised Versions of this License.

The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time.

Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program species that a certain numbered version of the GNU

General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of

that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify

a version number of the GNU General Public License, you may choose any version ever published by the Free Software

Foundation.

If the Program species that a proxy can decide which future versions of the GNU General Public License can be used, that

proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Program.

Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any

author or copyright holder as a result of your choosing to follow a later version.

15.

Disclaimer of Warranty.

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN

OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM

“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE

RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE

DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

16.

Limitation of Liability.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT

HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE

LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA

OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF

THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

[6000-NA]BN68-02112C-Eng.indb 78 2009-03-30 �� 2:23:01

17. Interpretation of Sections 15 and 16.

If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms,

reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with

the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to

make it free software which everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each source le to most effectively

state the exclusion of warranty; and each le should have at least the “copyright” line and a pointer to where the full notice is found.

<one line to give the program’s name and a brief idea of what it does.> Copyright (C) <year> <name of author>

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as

published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied

warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for

more details.

You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.

org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode:

<program> Copyright (C) <year> <name of author> This program comes with ABSOLUTELY NO WARRANTY; for details type

`show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details.

The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of course,

your program’s commands might be different; for a GUI interface, you would use an “about box”.

You should also get your employer (if you work as a programmer) or school, if any, to sign a “copyright disclaimer” for the program,

if necessary.

For more information on this, and how to apply and follow the GNU GPL, see <http://www.gnu.org/licenses/>.

The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a

subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want

to do, use the GNU Lesser General Public License instead of this License. But rst, please read <http://www.gnu.org/philosophy/

why-not-lgpl.html>.

[6000-NA]BN68-02112C-Eng.indb 79 2009-03-30 �� 2:23:01

GNU Lesser General Public License (LGPL)

Version 3, 29 June 2007

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The GNU General Public License is a free, copyleft license for software and other kinds of works.

The licenses for most software and other practical works are designed to take away your freedom to share and change the

works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions

of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General

Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your

programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure

that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or

can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do

these things.

To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore,

you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of

others.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same

freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them

these terms so they know their rights.

Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this

License giving you legal permission to copy, distribute and/or modify it.

For the developers’ and authors’ protection, the GPL clearly explains that there is no warranty for this free software. For both users’

and authors’ sake, the GPL requires that modied versions be marked as changed, so that their problems will not be attributed

erroneously to authors of previous versions.

Some devices are designed to deny users access to install or run modied versions of the software inside them, although the

manufacturer can do so. This is fundamentally incompatible with the aim of protecting users’ freedom to change the software.

The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most

unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems

arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as

needed to protect the freedom of users.

Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and

use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to

a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the

program non-free.

The precise terms and conditions for copying, distribution and modication follow.

TERMS AND CONDITIONS

Denitions.

“This License” refers to version 3 of the GNU General Public License.

“Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.

“The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees”

and “recipients” may be individuals or organizations.

To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than

the making of an exact copy. The resulting work is called a “modied version” of the earlier work or a work “based on” the

earlier work.

A “covered work” means either the unmodied Program or a work based on the Program.

To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable

for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation

includes copying, distribution (with or without modication), making available to the public, and in some countries other

activities as well.

To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with

a user through a computer network, with no transfer of a copy, is not conveying.

An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently

visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work

(except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a

copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list

meets this criterion.

[6000-NA]BN68-02112C-Eng.indb 80 2009-03-30 �� 2:23:01

1. Source Code.