Transcripción de documentos

A CDX-993 Natural Sound Compact Disc Player Thank you for selecting this YAMAHA Compact Disc Player. OWNER’S MANUAL FEATURES CONTENTS • • • • • Safety Instructions ................................................ 2 Connections ......................................................... 4 Identification of Components ................................ 6 Basic Operation .................................................... 8 Random-Sequence Play .................................... 12 Repeat Play ........................................................ 12 Program Play ...................................................... 13 Index Search ...................................................... 14 Track Programming for Recording to Tape ......... 15 CD Synchronized Recording .............................. 19 Notes about the Remote Control Transmitter ......................................................... 20 Notes about Handling Compact Discs ............... 20 Troubleshooting .................................................. 21 Specifications ..................................................... 22 • • • • • Random Access Programmable Play Random-Sequence Play Single Track/Entire Disc Repeat Play Automatic Spacing Capability Automatic Programming for Recording to Tape Automatic Peak Level Searching Capability CD Synchronized Recording with a Compatible YAMAHA Tape Deck Adjustable Display Brightness Remote Control Capability Optical and Coaxial Digital Outputs  SAFETY INSTRUCTIONS 10 Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 11 Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. 12 Cleaning – The unit should be cleaned only as recommended by the manufacturer. 13 Nonuse Periods – The power cord of the unit should be unplugged from the outlet when left unused for a long period of time. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. 14 Object and Liquid Entry – Care should be taken so that objects do not fall into and liquids are not spilled into the inside of the unit. 15 Damage Requiring Service – The unit should be serviced The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 17 Power Lines – An outdoor antenna should be located away Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 18 Grounding or Polarization – Precautions should be taken 3 4 Follow Instructions – All operating and other instructions should be followed. 5 Water and Moisture – The unit should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. 6 Carts and Stands – The unit should be used only with a cart or stand that is recommended by the manufacturer. 6A A unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn. 7 Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. 8 Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 9 2 16 by qualified service personnel when: A. The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the unit; or C. The unit has been exposed to rain; or D. The unit does not appear to operate normally or exhibits a marked change in performance; or E. The unit has been dropped, or the cabinet damaged. Servicing – The user should not attempt to service the unit beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel. Heat – The unit should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat. from power lines. so that the grounding or polarization is not defeated. We Want You Listening For A Lifetime (for US customers only) YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.  CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, vibration, dust, moisture, or cold. To avoid humming sounds, locate the unit away from other electrical appliances, motors, and transformers. To prevent fire or electrical shock, do not expose to rain and water. 3 Do not operate the unit upside-down. It may overheat, possibly causing damage. 4 Never open the cabinet. If a foreign object drops into the set, contact your dealer. 5 Do not use force on switches, knobs or cords. When moving the set, first turn the unit off. Always disconnect the cords from the AC outlet or other equipment by pulling the plug itself; never pull on the cord. 6 Do not clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 7 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that your unit is faulty. 8 Do not place another component on top of this unit, as damage or discoloration on the surface of the unit may result. 9 To prevent damage by lightning, disconnect the power cord from the AC outlet during an electrical storm. 10 When disconnecting the power cord from the AC outlet, grasp the plug; do not pull the cord. WARNING CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. DANGER Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only. DANGER: The use of optical instrument with this product will increase eye hazard. Laser Diode Properties • Material: GaAlAs • Wavelength: 780 nm • Emission Duration: continuous • Laser Output: max. 44.6 µW* * This output is the value measured at a distance of about 200 mm from the objective lens surface on the Optical Pickup Block. FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/ s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. Relocate either this product or the device that is being affected by the interference. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. 3  CONNECTIONS • Before making any connections, switch OFF the power to the unit and the amplifier or other components. • Connections should be made to the correct input terminals of the amplifier or other components. LINE OUT • If the placement of this unit creates interference (noise) in other equipment, such as a tuner, relocate this unit away from the affected equipment. CDX-993 DIGITAL AUDIO OUT VARIABLE FIXED 1 1 OPTICAL COAXIAL To AC outlet 3 2 Optical fiber cable (not included) 1 DIGITAL OUT Connection cord (not included) Connection cord (included) 2 Optical fiber cable (not included) OPTICAL CD COAXIAL DIGITAL IN Amplifier 4  To connect this unit to your amplifier, choose one of the following procedures: 1 When the LINE OUT (analog) terminals of this unit are used • Connect to either the VARIABLE terminals or the FIXED terminals. (As a general rule, connect to the FIXED terminals.) VARIABLE:The output level of these terminals can be adjusted by using the OUTPUT LEVEL button on the remote control transmitter (or OUTPUT LEVEL control on the front panel). FIXED: The output level of these terminals is not variable. • Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component. • Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, refer to the operation instructions for the amplifier being used. • The LINE OUT terminals of this unit are numbered 1. When connecting this unit with a YAMAHA amplifier or receiver whose terminals on the rear panel are numbered as 1, 2, 3, etc., connect the LINE OUT terminals of this unit to the input terminals numbered 1 on the rear of the amplifier or receiver. 2 When the DIGITAL OUT (OPTICAL) terminal(s) of this unit is used This unit has two DIGITAL OUT (OPTICAL) terminals on the front panel and the rear panel. • Before using the terminal on the rear panel, remove the terminal’s cover. • Make the connection from the terminal(s) to the optical input terminal(s) of an amplifier and/or other digital audio components by using a commercially available optical fiber cable(s). * Use an optical fiber cable that conforms to EIAJ standards. Other cables might not function correctly. • Be sure to replace the terminal’s cover when the terminal on the rear panel is not being used, in order to protect from dust. • The terminal(s) can also be connected to the optical input terminal of a DAT (Digital Audio Tape) deck or MD (Mini Disc) deck etc. to record a CD directly. • The output level of these terminals is not variable. 3 When the DIGITAL OUT (COAXIAL) terminal of this unit is used • Make the connection from this terminal to the digital input terminal of an amplifier by using a connection cord. • The output level of this terminal is not variable. 5  IDENTIFICATION OF COMPONENTS ( ) indicates the page number on which the control part is best described. FRONT PANEL • The control functions on the front panel and on the remote control transmitter are virtually identical, with the exceptions below. • (PLAY/PAUSE) button on the front panel has both the functions of the PLAY button and the PAUSE button on the remote control transmitter. AUTO DISPLAY OFF indicator (p. 11) Remote control sensor (p. 20) Display panel POWER switch (p. 8) Disc Tray (p. 8) AUTO DISPLAY OFF POWER PROG OPEN/CLOSE TAPE PEAK SPACE TIME +10 1 2 3 4 5 6 7 8 9 0 DIGITAL OUT PHONES REPEAT SKIP RANDOM SEARCH OUTPUT LEVEL 0 10 OUTPUT LEVEL control (p. 11) PHONES jack (p. 11) Open/close the control door When it is not necessary to operate controls inside the control door, close the door. To open the door 6 To close the door  REMOTE CONTROL TRANSMITTER DIMMER button (p. 11) TAPE button (p. 15) TIME button (p. 10) SYNCHRO button (p. 19) OPEN/CLOSE button (p. 8) CLEAR button (p. 14) PEAK button (p. 18) SYNCHRO SPACE DIMMER TIME OPEN/ CLOSE TAPE CLEAR PROG PEAK SPACE button (p. 10) PROG (program) button (p. 13) 1 2 3 4 5 6 +I0 7 8 9 0 REPEAT RANDOM INDEX INDEX button (p. 14) Number buttons (p. 9) RANDOM button (p. 12) REPEAT button (p. 12) SEARCH SEARCH button (p. 10) – OUTPUT LEVEL + SKIP SKIP button (p. 9) OUTPUT LEVEL button (p. 11) STOP STOP button (p. 9) PAUSE PLAY PLAY button (p. 8) PAUSE button (p. 9) * This manual describes how to operate this unit by using the remote control transmitter. To operate this unit from the front panel, use the corresponding buttons on the front panel. 7  BASIC OPERATION SYNCHRO 1 SPACE OPEN/ CLOSE DIMMER TIME TAPE CLEAR PEAK PROG 1 2 3 4 5 6 7 8 9 0 REPEAT RANDOM 2, 3 INDEX POWER +I0 SEARCH – OUTPUT LEVEL STOP 1 Turn the power on. + PAUSE SKIP PLAY 4 3 Close the disc tray. OPEN/ CLOSE POWER 2 Load a disc. Label side up OPEN/ CLOSE 4 PLAY AUTO DISPLAY OFF POWER Disc tray Play will begin from the first track of the disc. Notes • After closing the disc tray by pressing the OPEN/CLOSE button, the display shows the total number of tracks and the total recorded time of the disc for a few seconds. Display information during disc play SINGLE 3 4 5 6 7 8 9 10 11 12 TOTAL 1 2 3 4 5 6 7 8 9 10 11 12 1 Shows the track number selected or being played. 2 Shows the time displays. (Refer to “Selecting time displays” on page 10.) 3 Shows the CD track numbers (up to 20). After each track is played, its corresponding number disappears so that remaining track numbers can be seen at a glance. To turn off the power Press the POWER switch again. * If you turn on the power again with a CD in the tray, you can start playing the CD automatically. 8 • You can also close the disc tray by pressing the PLAY button button on the front panel), a number button, the (or RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in any of these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the disc.  To stop play completely PAUSE English To stop play temporarily STOP To resume play, press the PAUSE button again (or press the PLAY button). * button on the front panel can also be used to stop play temporarily or to resume play. To play a desired track on the disc DIRECT PLAY SKIP PLAY Select a desired track using the number buttons. To skip to a succeeding track, press the SKIP button once or repeatedly until the desired track number appears. 5 SKIP To skip to the beginning of the current track, press the button once. SKIP The selected track number is displayed. 1 2 3 4 5 6 7 8 9 SKIP Example: To select track 25, Press the number +10 button twice, then press the number 5 button once. +I0 5 To skip to a preceding track, press the SKIP button repeatedly until the desired track number appears. SKIP (twice) * If you enter a number that is higher than the last track number on the disc, the final track is played. • These operations can also be performed when the unit is in the pause or stop mode. • When using the SKIP button: If the button is pressed and held, the track number continuously changes to higher numbers (or lower numbers). 9  To advance or reverse play rapidly (MANUAL SEARCH) To advance rapidly SEARCH (Press and hold.) • The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. • Manual search can also be performed while disc play is paused, though no sound will be heard. To reverse rapidly SEARCH (Press and hold.) Selecting time displays You can select any of the four time displays by pressing the TIME button. 4 Total remaining time on the disc 1 Elapsed time of the track now playing TOTAL REMAIN 2 3 4 5 6 7 8 9 10 11 12 2 3 4 5 6 7 8 9 10 11 12 TIME 2 Remaining time of the track now playing 3 Total disc play time TOTAL REMAIN 2 3 4 5 6 7 8 9 10 11 12 2 3 4 5 6 7 8 9 10 11 12 Automatic spacing If you record a disc onto tape with an insufficient time space between tracks, the tape deck will not be able to perform blank search operations on the tape correctly. Such a search mistake of the deck can be prevented by pressing the SPACE button to insert spaces of about 4 seconds automatically between the tracks before recording. Note When the automatic spacing function is in effect, the display of the total time and of the total remaining time will include each of the 4 second non-recorded intervals placed between tracks. To cancel the automatic spacing function SPACE SPACE SPACE “SPACE” goes off from the display. “SPACE” appears on the display. 10  English Changing the brightness of the display You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button. During play During stopped or paused Normal illumination Normal illumination DIMMER Dim Dim (Off) Dim * While the display illumination is off, the AUTO DISPLAY OFF indicator on the front panel is illuminated. AUTO DISPLAY OFF (The AUTO DISPLAY OFF indicator lights up. In this state, if a disc is played, the display illumination will be turned off.) When you listen with headphones Set the OUTPUT LEVEL control on the front panel to “0” (minimum). Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL button (or OUTPUT LEVEL control on the front panel). PHONES – OUTPUT LEVEL + 11  RANDOM-SEQUENCE PLAY The unit can play the tracks on a disc in a random sequence selected by the unit’s microcomputer. To perform random-sequence play Notes • This feature will not function during programming, or during programmed play. button is pressed during random-sequence • If the SKIP play, the next randomly programmed track will be played. If button is pressed, play will return to the the SKIP beginning of the current track. • This indication appears during random track selection. RANDOM To cancel random-sequence play STOP RANDOM or • Total remaining time on the disc will not be displayed during random-sequence play. • If the power is switched off during the random-sequence play, pressing the POWER switch again to turn the unit on will automatically restore the random-sequence play. This feature is useful for timer play. REPEAT PLAY You can play any desired track or the entire disc repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. (Off) REPEAT SINGLE REPEAT A single track is repeatedly played. * This is also available in the programmed-play mode and the random-sequence play mode. * If the repeat play mode is switched off, the programmed-play mode or the random-sequence play mode will be resumed. SINGLE REPEAT FULL REPEAT FULL REPEAT All tracks (the entire disc) are played repeatedly. * In the programmed-play mode, all programmed tracks are repeatedly played. * In the random-sequence play mode, all randomly sequenced tracks are repeatedly played in the same order. * If the power is switched off during FULL REPEAT play mode, pressing the POWER switch again to turn the unit on will automatically restore FULL REPEAT play. 12  By programming tracks, you can enjoy listening to your favorite tracks in any desired order. As many as 40 tracks can be programmed in sequence. SYNCHRO SPACE 3 DIMMER PEAK OPEN/ CLOSE TIME TAPE CLEAR 1 2 3 4 5 6 7 8 English PROGRAM PLAY PROG INDEX 2 +I0 9 0 REPEAT RANDOM SEARCH – OUTPUT LEVEL STOP + PAUSE SKIP PLAY 1 4 3 Program a desired track by pressing the corresponding 1 Stop the unit. number button. STOP 6 * Repeat this operation to program more tracks. You can select the same track again. 2 PROG 4 PROGRAM TOTAL PLAY Flashes. Display information during programming PROGRAM TOTAL PROGRAM TOTAL 1 2 3 4 5 6 Notes • In step 2, if “P-01” does not appear on the display, press the TIME button. • If, during programming, the TIME button is pressed, the program number display is changed to display the total time of the programmed tracks. To return to the previous display, press the TIME button again. and ) button can be used during • The SKIP ( Program Play to skip to tracks within the program. • The SEARCH ( and ) button can be used during Program Play to search all tracks, including unprogrammed tracks. • You can insert a pause in your program by pressing the TAPE button instead of a number button. (In this case, B” appears on the display.) “ 1 Shows the program number for the track to be entered next. 2 Shows the selected track number. 3 Shows the total time of the tracks currently programmed. 4 Shows only the numbers of programmed tracks. * If the total time becomes 100 minutes or more, the highest position of a figure will not be displayed. 13  To stop Program Play To correct program data Press the STOP button. The first programmed track number will be displayed. To resume play, press the PLAY button. Play will begin from the beginning of the program. 1. Follow the procedure described in “To check program data.” Display the track number to be corrected by pressing the SKIP button. Press a number button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. After the correction has been completed, press the PROG button or the PLAY button. 2. 3. To check program data 1. 2. 3. 4. Press the STOP button to stop the program play. Press the PROG button. button. Each time you press this Press the SKIP button, the track number and the program number are displayed in the order of the program. When you want to button. check the preceding tracks, press the SKIP To cancel a program sequence There are three methods, as described below. • Press the STOP button or the CLEAR button while the unit is stopped. • Open the disc tray. • Switch off the power. INDEX SEARCH If the disc includes index numbers, play can be started from any desired index number. SYNCHRO SPACE 1, 3 DIMMER PEAK OPEN/ CLOSE TIME TAPE CLEAR PROG 1 2 3 4 5 6 +I0 7 8 9 0 INDEX REPEAT 2 RANDOM SEARCH – OUTPUT LEVEL STOP 2 INDEX INDEX 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 14 SKIP PLAY Press the INDEX button. 5 6 PAUSE To cancel the index search function 1 Select a track which has index numbers. 3 Select the desired index number. + Notes • Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if such index numbers are included. • If an index number is selected that is higher than any index number on that disc, play will start from the last index number point on the disc. • For some discs, play may begin slightly prior to the actual designated index point. • If the disc has no encoded index points, play will begin from the start of the selected track. • The index number can be designated only while “INDEX” appears on the display.  The unit can automatically program tracks considering the tape’s total time. This convenient feature can help you to program tracks so that they fit onto the tape with the least amount of unrecorded space remaining at the end of each side (A and B) of the tape. English TRACK PROGRAMMING FOR RECORDING TO TAPE L Automatic tape-programming The unit can automatically program tracks on a disc in their original order. 4 Otherwise, you can enter the tape’s total possible recording time manually. Example: For a C-64 tape (32 minutes on each side) 3 6 SYNCHRO 2 SPACE DIMMER PEAK TAPE TIME OPEN/ CLOSE CLEAR PROG 1 2 3 4 5 6 7 8 9 0 REPEAT RANDOM 5 OUTPUT LEVEL STOP 1 + PAUSE + INDEX +I0 SEARCH – 4 SKIP PLAY 4 7 6, 7 5 Press the REPEAT button. REPEAT The unit automatically programs tracks for side A and side B separately considering the tape’s total time. 1 Stop the unit. 6 Begin recording on the tape deck and press the STOP PLAY button on this unit at the same time. 7 The unit will pause at the end of side A of the tape. * The peak level searching function of this unit is useful for adjusting the recording level on the tape deck. (Refer to page 18.) 2 You can automatically insert additional time space between tracks. (Refer to page 10.) Turn the tape over to side B, resume recording and, at the same time, press the PLAY or PAUSE button on this unit. Notes • All the tracks may not be programmed if the tape’s length is not enough. To program all tracks, use a longer tape. • In step 5, you can check the program data for side A and side B. SPACE SPACE PROGRAM A 3 Enter the tape’s total possible recording time. TOTAL 1 2 3 4 5 TAPE You can select any of four tape lengths by pressing the TAPE button. TAPE (Off) 1 The total number of programmed tracks of each side appears momentarily when the automatic programming is finished. Then the first programmed track number for side A reappears. 2 Shows the total time of programmed tracks for each side. 3 Shows the side of the tape. 4 Shows the programmed track numbers for each side. • To check, cancel or correct program data, refer to page 14. * In checking the program data, note that “Pu” appears between track numbers for side A and side B. • You can use “CD SYNCHRONIZED RECORDING” if you have a YAMAHA tape deck with this function. In step 6 and 7, press the SYNCHRO button then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 19.) 15  L Manual tape-programming For recording tracks in any desired order onto a tape. 4 5 Select the track numbers to be recorded on side B in any desired order. SYNCHRO SPACE DIMMER PEAK TAPE CLEAR 7 2 3, 5 PROG 1 2 3 4 5 6 +I0 7 8 9 0 INDEX REPEAT 1 2 3 4 5 6 +I0 7 8 9 0 OPEN/ CLOSE TIME RANDOM SEARCH – OUTPUT LEVEL STOP + SKIP PAUSE PLAY 6, 7 6 Begin recording on the tape deck and press the PLAY button on this unit at the same time. 7 The unit will pause at the end of side A of the tape. Turn the tape over to side B, resume recording and, at the same time, press the PLAY or PAUSE button on this unit. 1 Follow steps 1 – 4 on page 15. 2 PROG PROGRAM TOTAL REMAIN A 1 2 3 4 5 6 7 8 9 10 11 12 The track numbers you can program flash. 3 Select the track numbers to be recorded on side A in any desired order. 1 2 3 4 5 6 +I0 7 8 9 0 The selected track numbers stop flashing and remain lit. If a track is too long to fit on the remaining portion of side A, the number stops flashing and disappears. You can not program a number that stops flashing and disappears. 4 When track selection for side A is finished, press the TAPE button. TAPE PROGRAM TOTAL REMAIN B 2 3 A pause is inserted. 16 5 6 7 9 11 Notes • If, in step 3 or 5, “E rr” appears on the display, the track number just selected cannot be programmed because there is not enough time remaining on the tape. However, at this time, if any other track number is flashing continuously on the display, you can program it instead of the unprogrammable one. • In step 3 or 5, each time a selection is made, the track number and the tape’s remaining time will be displayed, and then the display will change to indicate the next program number. • You can use “CD SYNCHRONIZED RECORDING” if you have a YAMAHA tape deck with this function. In step 6 and 7, press the SYNCHRO button then press the PLAY button on this unit’s control transmitter. Recording automatically begins. (For details, refer to page 19.) • To check, cancel or correct program data, refer to page 14. * In checking the program data, note that “Pu” appears between track numbers for side A and side B. • A maximum of 40 tracks can be programed. A pause is counted as one track.  English L Automatic Random Program tape recording The unit can automatically program tracks in random order for recording to tape. SYNCHRO SPACE 4 DIMMER PEAK OPEN/ CLOSE TIME TAPE CLEAR PROG 1 2 3 4 5 6 7 8 9 0 REPEAT RANDOM INDEX +I0 SEARCH – OUTPUT LEVEL STOP + 2 Notes • Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly. • If the tape’s length is not enough, not all tracks can be programmed. In this case, exchange the tape for a longer one. • In step 2, you can check the program data for side A and side B. SKIP PAUSE PLAY 3, 4 PROGRAM A TOTAL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 Follow steps 1 – 4 on page 15. 2 RANDOM The unit will automatically program tracks for side A and side B separately considering the tape’s total time. 3 Begin recording on the tape deck and at the same time, press the PLAY button on this unit. 4 The unit will pause at the end of side A of the tape. 1 The total number of programmed tracks of each side appears momentarily when the automatic programming is finished. Then the first programmed track number for side A reappears. 2 Shows the total time of programmed tracks for each side. 3 Shows the side of the tape. 4 Shows the programmed track numbers for each side. • To check, cancel or correct program data, refer to page 14. * In checking the program data, note that “Pu” appears between track numbers for side A and side B. • You can use “CD SYNCHRONIZED RECORDING” if your tape deck has this function. In step 3 and 4, press the SYNCHRO button then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 19.) Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. 17  Automatic searching for the peak level on a disc This convenient feature automatically finds level peak in the source. It then plays the peak repeatedly for a few moments in order for you to adjust the recording level on the tape deck, before you begin recording. 2 SYNCHRO SPACE DIMMER PEAK OPEN/ CLOSE TIME TAPE CLEAR PROG 1 2 3 4 5 6 7 8 9 0 REPEAT RANDOM INDEX +I0 SEARCH – 1 OUTPUT LEVEL STOP + PAUSE SKIP PLAY To cancel this function 1 Stop the unit. Press the STOP button. (Some other buttons can also be used to cancel this function.) STOP Notes • Sound peak levels are randomly selected by this unit’s internal microcomputer. Therefore, even if a peak search is performed twice or more on the same disc, the same peak may not be selected each time. However, this will not greatly affect the adjustment of recording levels. • In Program Play mode, this feature functions with programmed tracks only. If Program Play is being performed, first press the STOP button, and then press the PEAK button. If Program Play is not being performed, press only the PEAK button. 2 PEAK PEAK The peak level search is performed on the disc. PEAK REPEAT 1 2 3 4 5 6 7 8 9 10 11 12 PEAK REPEAT 1 2 3 4 5 6 7 8 9 10 11 12 Next, the part where the source level peaks is repeatedly played. Adjust the recording level on the tape deck listening to this sound. 18  This unit can perform automatic synchronized CD to tape recording. With this function, you can record a CD on tape very easily and more precisely. This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed near each other so that both can receive the signals from this unit’s remote control transmitter. 3 SYNCHRO SPACE 4 OPEN/ CLOSE DIMMER TIME TAPE CLEAR PEAK PROG 1 2 3 4 5 6 7 8 9 0 REPEAT RANDOM OUTPUT LEVEL STOP 1 Load the disc. OPEN/ CLOSE + PAUSE 1 INDEX +I0 4 5 SEARCH – English CD SYNCHRONIZED RECORDING SKIP PLAY 4 If necessary, select a desired track. 5 AUTO DISPLAY OFF POWER SKIP or 2 Load a tape on the tape deck. 5 PLAY * The peak level search function of this unit is useful for adjusting the recording level on the tape deck. (Refer to page 18.) 3 SYNCHRO Both CD play and tape deck recording begin. * CD play begins a little later than recording starts. 6 If you want to stop recording temporarily and restart recording from a desired track, follow steps 3 – 5 again. This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit flashes on and off. To cancel this function Press the STOP button. Notes • To finish or stop the recording, press the stop button on your tape deck. • A programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 13 – 14 for the programming procedure.) • This function can also be used together with the automatic tape-programming function. (Refer to page 15 – 17.) 19  NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range 2 Remote control sensor 1 3 Within approximately 6 m (19.7 feet) 30° Battery replacement 30° If you find that the remote control transmitter must be used closer to the main unit than usual, the batteries are weak. Replace both batteries with new ones. Notes • Use only AA, R6, UM-3 batteries for replacement. • Be sure the polarities are correct. (See the illustration inside the battery compartment.) • Remove the batteries if the remote control transmitter will not be used for an extended period of time. • If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. Notes • There should be no large obstacles between the remote control transmitter and the main unit. • If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting. NOTES ABOUT HANDLING COMPACT DISCS • This compact disc player is designed only for playing mark. Never attempt to load compact discs bearing the any other type of disc into the unit. The unit will also play 8-cm (3-inch) compact discs. • To remove a disc from its storage case, open the case and then press down at the center; with a finger through the center hole and the outer edges held as shown in the illustration, lift the disc out carefully. • Compact discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center. ,,,,, ,,,,, ,, ,,, ,,, • Do not try to clean the disc’s surface by using any type of disc cleaner, record spray, anti-static spray or liquid, or any other chemical-based liquid, because such substances might irreparably damage the disc’s surface. • Always handle the disc with care so that its surface is not scratched. • Do not expose discs to direct sunlight, high temperature or high humidity for a long period of time, because these might warp or otherwise damage the disc. No! • Compact discs are not subjected to wear during play, but damage to the disc surface when the disc is being handled can adversely affect the disc’s play. 20 To play a 8-cm (3-inch) CD Place it in the inner recessed area of the disc tray. Do not put a normal (12-cm/5-inch) CD on top of a 8-cm CD.  If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM PROBABLE CAUSE REMEDY The player does not switch ON when the POWER switch is pressed. The power cord is not connected or not completely connected. Securely connect the power cord. It happens that this unit does not work normally. There is an influence of strong external noise (lightning, excessive static electricity, etc.) or a misoperation was performed while using this unit. Turn this unit power off and disconnect the AC power from the AC outlet. After about 30 seconds have passed, connect the power and try again. The disc tray does not close completely. A foreign object is obstructing the tray. Carefully check the disc tray and remove the foreign object. Play does not begin. The disc is damaged. Check the disc carefully; replace it if necessary. There is moisture on the laser pickup. Wait 20 to 30 minutes after switching the unit ON before trying to play a disc. The disc has been loaded upside down. Reload the disc with the label side up. The disc is dirty. Clean the disc. Play is delayed, or begins at the wrong place. The disc may be scratched or damaged. Check the disc carefully; replace it if necessary. No sound. Improper output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. Improper amplifier operation. Set the amplifier controls to the correct input selection. The player is being subjected to vibrations or impacts. Relocate the player. Sound “skips.” English TROUBLESHOOTING The disc is dirty. Clean the disc. Sound “hums.” Improper cable connections. Securely connect the audio cables. If the problem persists, the cables may be defective. Noise from a nearby tuner. The tuner is too close to the player. Move the tuner and player farther apart. Noise from inside of the disc tray. The disc may be warped. Replace the disc. The remote control transmitter does not work. The batteries of this remote control transmitter are too weak. Replace the batteries with new ones. Direct sunlight or lighting (of an inverter type of fluorescent lamp etc.) is striking the remote control sensor of the main unit. Change position of the main unit. To prevent a malfunction of this unit • Do not use any non standard shaped CD (heart etc.) available on the market, because it may damage the unit. • Do not use a CD with tape, seals, or paste on it, because damage to the unit may result. 21  SPECIFICATIONS AUDIO SECTION GENERAL Frequency response ........................... 2 Hz – 20 kHz, ±0.3 dB Power requirements Australia model ................................................. 240 V, 50 Hz Europe and U.K. models .................................. 230 V, 50 Hz General model ......................... 110/120/220/240 V, 50/60 Hz Harmonic distortion + noise (1 kHz) ............... 0.002% or less S/N ratio ........................................................... 118 dB or more Power consumption ......................................................... 20 W Dynamic range .................................................. 98 dB or more Wow & flutter ..................................................... Unmeasurable Output voltage (1 kHz, 0 dB) VARIABLE ..................................................... 2.0 ±0.5 V max. FIXED ..................................................................... 2.0 ±0.5 V Headphones output (–20 dB) .............. 300 ±60 mV/150 ohms Dimensions (W × H × D) .......................... 435 × 117 × 388 mm (17-1/4” × 4-5/8” × 15-3/8”) Weight ....................................................... 9.6 kg (21 lbs. 3 oz) Accessories .................................................... Connection cord Remote control transmitter Batteries (size AA, R6, UM-3) Please note that all specifications are subject to change without notice. 22  YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA V211050 Printed in Malaysia