Yamaha DTX700 Manual de usuario

  • ¡Hola! Soy un chatbot de IA específicamente entrenado para ayudarte con el Yamaha DTX700 Manual de usuario. He revisado el documento y puedo ayudarte a encontrar la información que necesitas o explicarla de manera clara y sencilla. ¡Pregunta lo que necesites!
DRUM TRIGGER MODULE
DTX700
Reference Manual
The DTX700 Reference Manual created via the PDF format is equipped with special features that are exclusive to electronic files, such as
the Link function and the Search function which let you jump to the desired page by clicking the specific term.
This illustration shows the page displayed on the DTX700 when the front panel’s [MENU] button is pressed. When you click on any of the
menu items, you will be taken to the start of the corresponding section.
This function built in the viewer software is very useful if you want to know the meaning of unfamiliar terms.
When using Adobe Reader to read this manual, enter a specific word in the search box, then press the <Enter> key of your computer key-
board to call up the relevant section in this manual.
NOTE
Make sure to check and download the latest version of the Adobe Reader from the following site.
http://www.adobe.com/products/reader/
When using Adobe Reader, click to return to the previous page view/go to the next page view via the buttons in the toolbar.
This function is very useful if you want to return to the previous page view when jumping to a link page.
NOTE
If the previous page view/next page view buttons are not shown in the toolbar, hold the <Alt> key and press < >/< > keys to move to
the previous/next page view.
For more information on these and other functions in the software, refer to the owner’s manual of the software.
How to Use This Manual
Search Function
Previous Page View/Next Page View
EN
DTX700 Reference Manual 2
Internal Design of the DTX700
In this reference section, you will find a description of
what takes place within the DTX700 between striking
of a pad and the output of sound from speakers.
Understanding how signals flow and are processed
internally will allow you to utilize the powerful func-
tions of this versatile instrument to their maximum
potential.
Pads & Trigger Signals
Whenever you strike a pad, a trigger signal containing various
items of performance data will be produced. These signals typi-
cally reflect the strength with which the pad was struck, the actual
location of the strike, and the like; furthermore, they are delivered
via a cable and a trigger input jack to the DTX700’s internal tone
generator, which outputs the appropriate drum sounds in response.
If a pad is set up to generate just one sound, there will be a one-to-
one relationship between the trigger signal type and the drum voice
output. With certain types of pad, however, it is possible to produce
a range of different types of trigger signal that reflect the location
of the strike, the drumming technique being used, and other factors.
[Terminology]
Zone:
The term “zone” is used to refer to specific areas of the pad,
such as the rim, cup, and head. Pads with multiple zones (such
as two- and three-zone pads) can produce a different trigger sig-
nal for each. As their name suggests, one-zone pads produce
only one signal irrespective of where they are struck.
Trigger input source:
Trigger input sources are named in accordance with the way in
which the corresponding pad or pedal is struck or operated.
One-zone pads (producing a single trigger sig-
nal)
A mono pad such as the TP65 Single Zone Drum Pad or
PCY65 Single Zone Cymbal Pad transmits only one type of
trigger signal to the DTX700, irrespective of where it is struck.
Two- and three-zone pads (producing multiple
trigger signals)
In contrast to the PCY65 Single Zone Cymbal Pad and other
mono pads, multi-zone pads such as the PCY65S Double Zone
Cymbal Pad can produce two different types of trigger signal
depending on the zone that is struck, while the PCY135 Triple
Zone Cymbal Pad can produce three. In specific terms, multi-
zone pads come in either the two-zone or three-zone variety.
For instance, the PCY135 Triple Zone Cymbal Pad illustrated
below comprises three trigger input sources – the bow, the
edge, and the cup – each of which generates a trigger input sig-
nal when struck.
Example: PCY135 trigger input sources when connected
to the [yCRASH1] trigger input jack
Trigger input source:
“Crash1Bw”
The voice assigned
to the bow’s trigger
input source will be
played.
Trigger input source:
“Crash1Eg”
Trigger input source:
“Crash1Cp”
Bow
Edge
Cup
The voice assigned
to the edge’s trigger
input source will be
played.
The voice assigned
to the cup’s trigger
input source will be
played.
Internal Design of the DTX700
DTX700 Reference Manual
3
Example of how a pad controller can be used
to increase the number of trigger input
sources
Consider, for example, a situation where an XP100SD Snare
Pad is connected to the [qSNARE] trigger input jack and the
PadCtrlType (Pad Control Type) parameter from the Menu
area’s Kit/Pad page is set to “snaresOn/Off”. As this pad com-
prises three zones – namely, the open rim (A), the closed rim
(B), and the head (C) – it will have three trigger input sources.
If the pad controller were then to be used to switch the
SnaresOn/Off (Snare Wire On/Off) parameter from “on” to
“off” or vice-versa, the pad could be made to have a total of six
trigger input sources.
Combining three zones and a pad controller to
give six trigger input sources
Trigger Setups
Your DTX700 uses a set of parameters called trigger setups to
ensure that trigger signals from pads and controllers are processed
in an ideal manner. In addition to the actual sensitivity of the pad
when it is struck, a trigger setup can include settings intended to
prevent a pair of trigger signals being produced in response to a
single strike (i.e., double triggering) and unwanted trigger signals
being produced by pads other than the one that was struck (i.e.,
crosstalk). The DTX700 comes pre-loaded with a total of 9 Preset
trigger setups suitable for many different needs, and you can also
create up to 20 unique User trigger setups to suit your own individ-
ual requirements.
Pads and trigger input jacks
As described above, some pads feature multiple trigger input
sources, each of which can generate its own trigger signals. It is the
role of the DTX700 to collect and process these signals, but the
types of trigger signal handled will depend on which of the trigger
input jacks is used for connection. For the most up-to-date infor-
mation on the correspondence between pad types and DTX700
trigger input jacks, please refer to the following web page.
http://dtxdrums.yamaha.com/
Drum Kits & Voices
Upon the receipt of a trigger signal, the DTX700’s internal tone
generator plays the voice assigned to the corresponding trigger
input source. The term “kit” is used to refer to a full set of voice
assignments for all trigger input sources, and the DTX700 comes
preloaded with 50 preset drum kits. You are, however, free to mod-
ify these drum kits in whatever way you see fit. In many cases, it is
sufficient to simply select one of the preset drum kits for your per-
formances, but if you wish to create original kits, it is important
that you understand the inner workings of the DTX700, including
the makeup of drum kits.
Voice assignments for trigger input sources
As voices may be freely assigned to each of the trigger input
sources sending trigger signals from the pads, original drum
kits may be easily configured. For details of the basic proce-
dure, see page16.
Example: XP100SD
When pad controller is
turned clockwise, setting
SnaresOn/Off to “on”:
Total of six
trigger input
sources
Trigger input
source:
“SnareOp”
Trigger input
source:
“SnareCl”
Trigger input
source:
“SnareHd”
When pad controller is turned
counter-clockwise, setting
SnaresOn/Off to “off”:
Trigger input
source:
“SnrOpOff
Trigger input
source:
“SnrClOff
Trigger input
source:
“SnrHdOff
Individual voices for each trigger input source:
A: Drum voice assigned to
trigger input source A.
B: Drum voice assigned to
trigger input source B.
C: Drum voice assigned to
trigger input source C.
Internal Design of the DTX700
DTX700 Reference Manual
4
Instrument assignments for trigger input jacks
Assigning voices individually to each trigger input source can
be quite time consuming. In order to speed up this process, the
DTX700 features instrument parameters that group together the
drum voices assigned to the multiple trigger input sources cor-
responding to each trigger input jack – or in other words, the
drum voices assigned to each pad.
Voices grouped as kits
For most drummers, the preset drum kits built into the DTX700
are sufficient to provide a wide range of variation in perfor-
mances. If, however, you wish to customize these presets, you
can simply change the instrument set for each trigger input jack
to assign new voices to each of the corresponding pad’s trigger
input sources. If you wish to go even further, meanwhile, you
can also change voice assignments on an individual trigger
input source basis to create drum kits finely tuned to your indi-
vidual needs (see page16).
Sounds Produced Using the Pads
Whenever the DTX700’s internal tone generator receives a trigger
signal produced by striking a pad or by operating a controller, it will
play the voice or song assigned to that pad or controller. As
described below, three different types of assignment are supported –
namely, voices, songs, and waves.
Voices
Drum sounds such as snares, bass drums, and cymbals; percus-
sion sounds; and pitched-instrument sounds such as piano,
xylophone, and guitar.
Songs
Phrases containing performance data for a range of different
instruments.
•Waves
Audio files imported into the DTX700 from a variety of
sources.
The Menu area’s Kit/Voice page is used to assign voices, songs,
and waves to pads and controllers. On that page, available assign-
ments are categorized by musical instrument type (in the case of
voices), as songs, or as waves. While these three assignment types
can all be defined for pads in the same way, it is important to
remember that each type plays in a different way and is configured
using different parameters.
Voices
The DTX700 comes preloaded with a vast library of drum
sounds, such as snares, bass drums, and cymbals, together with
a broad spectrum of percussion-instrument sounds. Also
included are many pitched instruments, such as piano, xylo-
phone, and guitar. The term “voice” is used to refer to these
built-in instrument sounds. Drum and percussion voices from
this collection are not rooted at one specific pitch; instead, you
can intuitively adjust their tuning in order to match the sounds
of other instruments. Meanwhile, pitched-instrument voices
such as piano and guitar can be assigned to pads with a specific
pitch setting, thus allowing you to play several different notes
together to produce chords; in addition, you can also have pads
trigger successive notes from a phrase each time they are
struck, making it possible to play melodic parts (see page21).
With the timing and strength of your playing reflected in the
sound produced by preset voices, you can perform with practi-
cally the same level of expressiveness as afforded by acoustic
instruments.
Choosing instruments for each trigger input jack
By selecting an instrument, all of the
voices assigned to a pad’s three trigger
input sources can be changed together.
Three-zone pads (like the PCY135):
Single-zone pads (like the KP65):
Trigger
input
source
Layer
*1
MIDI
note
number
Layer
*2
Instrument
Crash1Bw
Layer A Note No. Voice
Instrument
Layer B Note No. Voice
Layer C Note No. Voice
Layer D Note No. Voice
Crash1Eg
Layer A Note No. Voice
Layer B Note No. Voice
Layer C Note No. Voice
Layer D Note No. Voice
Crash1Cp
Layer A Note No. Voice
Layer B Note No. Voice
Layer C Note No. Voice
Layer D Note No. Voice
Trigger
input
source
Layer
*1
MIDI
note
number
Layer
*2
Instrument
Kick
Layer A Note No. Voice
Instrument
Layer B Note No. Voice
Layer C Note No. Voice
Layer D Note No. Voice
*1: See page 6 for details.
*2: Sounds set using the VoiceCategory
and VoiceNumber parameters from
the Menu area’s Kit/Voice page.
Internal Design of the DTX700
DTX700 Reference Manual
5
Songs
The DTX700 allows you to play complete songs simply by
striking one pad. In the same way as snare sounds are produced
by striking a pad to which a snare voice has been assigned, you
can start and stop the playback of songs by striking the pads to
which they are assigned. In effect, pads with song assignments
operate as start/stop switches whenever struck (regardless of
how hard or soft they are actually struck). Your DTX700 comes
pre-loaded with 63 songs containing performance data from a
host of different instrument genres (i.e., 2 demo songs, 44 prac-
tice songs, and 17 pad songs), and by assigning these freely to
pads, you can easily create highly individualized kits. For even
more flexibility, you can also copy performances you have
recorded (using the [REC] button) and even import standard
MIDI files (Format 0) to create a total of 93 songs (see
page36).
Waves
The DTX700 is fully equipped to play back audio files that can
be created, edited, and played on computers. Commonly called
“samples” or “sample data”, these files contain short portions
of sound. In the context of the DTX700, however, they are
referred to as “waves”. Either WAV or AIFF type audio files
can be imported into the instrument’s internal wave memory
and assigned to pads in much the same way as voices and songs
(see page55). You can also edit imported waves. As audio files
imported into the DTX700’s wave memory are assigned to pads
as a single sound much like voices and songs, the term “wave
data” is used within this manual in the same way as “voice
data” or “song data”. In contrast, the term “wave file” is used to
refer to data that has not yet been imported and is handled in the
form of a file on a computer, sampler, or USB memory device.
Kit Makeup
In terms of the DTX700, the term “kit” is used to refer to a collec-
tion of voices, songs, and waves assigned to the trigger input jacks
(q to !2) and the [HI-HAT CONTROL] jack (open and closed).
For added convenience, the drum trigger module comes pre-loaded
with 50 different Preset kits. You are, however, free to make your
own unique kits in whatever way you see fit, and up to 60 can also
be stored internally. And if, for whatever reason, you need to restart
your customizing from scratch, you can press the [KIT] button to
access the Kit area and then press the [F3] button (INIT KIT) to
restore the factory default settings.
Kits & Voices
Within the DTX700, voice data is grouped and stored in kit
units. In other words, each kit contains the voice-related infor-
mation for all of its pad and controller assignments. Whenever
a kit is created by editing voices, the voices themselves are not
stored within the kit; instead, the settings for all associated
parameters – such as tuning, stereo pan, attack time, release
time, effects, etc. – are stored. As you would expect, each of the
pads can have different parameter settings (see page16). There-
fore, even when the display shows the same voice assigned to
two or more pads, the sounds produced by each will not neces-
sarily be the same.
Preset songs (63)
Demo
songs (2)
Practice songs
(44)
Pad songs
(17)
Total capacity for songs (93)
Preset kits (50)
Total capacity for kits (60)
Using INIT KIT, you can
restore the factory default
settings for Preset kits.
Internal Design of the DTX700
DTX700 Reference Manual
6
Voices & Layers
The DTX700 provides four layers (A to D) for each trigger
input source. For this reason, you can assign up to four different
voices to each one. What’s more, these layered voices can also
be triggered in three different ways – for example, they will all
play together in Stack mode, a different one will be played for
each strike in Alternate mode, and they can be sustained and
turned off on each successive strike in Hold mode. (Use the
Mode parameter from the Menu area’s Kit/MIDI/Assign page
to make these settings.)
To overlay multiple voices, first of all select the trigger input
source, and use the Note parameter from the Menu area’s Kit/
MIDI/Assign page to ensure that a MIDI note number is
assigned to each of its layers. Then, use the above-mentioned
Mode parameter to set the way in which the layered voices are
to be triggered, and finally, use the VoiceCategory and Number
parameters from the Menu area’s Kit/Voice page to assign suit-
able voices to each layer.
NOTE
When assigning a pad song to a trigger input source, only
one layer can be configured for it.
Voices and MIDI note numbers
It is important to realize that voices are actually assigned to
MIDI note numbers whenever Stack mode or Alternate mode is
used (see page21). With these modes, the sounds to be played
together are set using MIDI note numbers and not voices. To
change the correspondence between MIDI note numbers and
voices within the current kit, you can select voices assigned to
MIDI note numbers on the Menu area’s Kit/Voice page.
Effects
The effect processor built into your DTX700 applies special audio
effects to the output from the tone generator in order to modify and
enhance its sound in a wide variety of ways. Normally applied dur-
ing the final stages of editing, effects allow you optimize the sound
to better suit your own specific requirements.
Effect Processor Design
The DTX700 can apply effects to the tone generator’s output
using the following four effect units.
Variation Effect
Variation effects allow you to sculpt your sound in a variety
of different ways. A specific type of variation effect can be
selected for each kit, and you can also specify the degree to
which this effect is applied to each layer (using the
VarSend(Dry) (Variation Send Level) parameter from the
Menu area’s Kit/Voice page).
Chorus
Chorus effects change the spatial characteristics of the
sounds to which they are applied. A specific type of chorus
effect can be selected for each kit, and you can also specify
the degree to which this effect is applied to each layer (using
the ChoSend (Chorus Send Level) parameter from the Menu
area’s Kit/Voice page).
Reverb
Reverb effects add a warm ambience to sounds, simulating
the complex reflections of actual performance spaces, such
as a concert hall or a small club. A specific type of reverb
effect can be selected for each kit, and you can also specify
the degree to which this effect is applied to each layer (using
the RevSend (Reverb Send Level) parameter from the Menu
area’s Kit/Voice page).
NOTE
The degree to which songs are processed by these effect
units can be specified using the VarSend(Dry) (Variation
Send Level) parameter, the ChoSend (Chorus Send
Level) parameter, and the RevSend (Reverb Send Level)
parameter from the Menu area’s Song/MIDI page; fur-
thermore, these settings can then be saved as part of the
corresponding song data.
Kit EQ
Supporting four-band equalization, the Kit EQ effect unit
can be configured in a different way for each kit (using the
parameters from the Menu area’s Kit/EQ page).
Master EQ
Processing the overall instrument sound just before output,
Master EQ supports three-band equalization. This effect unit
is configured using the Menu area’s Utility/Master EQ page,
and changing kits has no effect on its equalization settings.
Stack
All four layers will sound simultaneously.
Layer A
Layer B
Layer C
Layer D
Four sounds
produced together.
Alternate
Individual layers will sound sequentially.
Layer A
sounds.
Layer B
sounds.
Layer C
sounds.
Layer D
sounds.
Internal Design of the DTX700
DTX700 Reference Manual
7
Effect Signal Flow
*1: Click-track voices cannot be sent to effects.
*2: Using the VarSend(Dry) (Variation Send Level) parameter, you can set the required balance between the amount of the
signal that will bypass the effect (i.e., the dry level) and the amount that will be sent to the effect (i.e., the wet level).
*3: Effects cannot be applied to external audio input via the [AUX IN] port.
Effects & Effect Categories
The various individual effects provided by this instrument’s
effect units are sorted into a number of different categories.
What follows is a description of each category and the effects it
contains. We recommend that you refer to these descriptions
whenever setting effects. Each category’s effect table indicates
which of the effect units – i.e., Reverb (Rev), Chorus (Cho), or
Variation (Var) – can be used to apply the effect in question.
Any effect marked using a symbol can be selected and modi-
fied on the corresponding effect unit’s parameter setting pages.
Compressor & EQ
The compressor is an effect commonly used to limit and
compress the dynamics (i.e., softness or loudness) of an
audio signal. In the case of vocals, guitar parts, and other
signals that have widely varying dynamics, this effect essen-
tially squeezes the dynamic range, making soft sounds
louder and loud sounds softer. Furthermore, a compressor’s
attack and decay characteristics can be adjusted to modify
how punchy or sustained an audio signal sounds. Multi-band
compression, meanwhile, splits the input into three different
frequency bands for processing independent of each other;
accordingly, this type of effect can be thought of as combin-
ing compression with equalization.
AUX IN
Variation
Chorus
Reverb
Dry signal
Kit EQ Master EQ
RevReturn
ChoReturn
VarReturn
VarPan
ChoPan
RevPan
VarToRev
ChoToRev
VarToCho
RevSend
ChoSend
VarSend
VarSend(Wet)
VarSend(Dry)
*
1
*
3
*
2
Effect Type Var Description
Compressor
Relatively fast-acting compressor well
suited to solo performances.
MltBndComp Three-band compressor.
3 Band EQ
Three-band compressor also featuring
equalization.
Vintage EQ Vintage five-band parametric equalizer.
Enhancer
Adds higher-order harmonics to enhance a
sound’s presence.
Internal Design of the DTX700
DTX700 Reference Manual
8
Flanger & Phaser
A flanger creates a swirling, metallic sound, similar to that
of a jet plane. While this effect operates using the same
basic principles as chorus effects, it uses shorter delay times
and also incorporates feedback to produce a very distinctive
swelling sound. Rather than being used constantly through-
out a song, it is more suited to selective use in specific sec-
tions in order to add variety. A phaser, meanwhile,
introduces a phase shift into the sound being processed
before returning it to the effect input using a feedback circuit
in order to produce a characteristic animated yet mellow
tone. Gentler overall than a flanger, this effect can be put to
use in a wider range of situations, and for example, is often
used with electric pianos to sweeten their sound in a variety
of ways.
Distortion
As its name suggests, a distortion effect distorts the sound
fed into it. It produces a sound similar to that of an amplifier
turned up too high or fed with a signal that is already suffi-
ciently loud. This type of effect is widely used to add a
harsh, biting edge; furthermore, the resultant sound is char-
acterized by overall thickness and long sustain times. This
thickness comes from the large numbers of harmonics con-
tained within clipped signals. Meanwhile, the longer sustain
is not produced by the original sound being stretched; rather,
it is produced when the slowly-fading release portion that
cannot normally heard is amplified and distorted.
Wah
A wah effect dynamically changes the frequency character-
istic of a filter in order to produce a highly unique filter-
sweep sound. Auto wah changes the frequency in a cyclic
manner using an LFO, while touch wah performs filter
sweeps in response to the volume of the input signal.
Reverb
Reverb effects model the complex reverberation produced
by sounds within enclosed spaces. In this way, they add a
natural-sounding sustain, which produces a feeling of depth
and space. Furthermore, different types of reverb – such as
hall, room, plate, and stage – can be used to simulate the
sound of acoustic environments of varying sizes and con-
structions.
Effect Type Cho Var Description
SPX Flanger Produces a swirling, metallic sound.
TempoFlanger Tempo-synchronized flanger.
PhaserMono Vintage sounding mono phaser.
PhaserStereo Vintage sounding stereo phaser.
TempoPhaser Tempo-synchronized phaser.
Effect Type Var Description
AmpSim 1 Guitar amp simulation.
AmpSim 2 Guitar amp simulation.
CompDist Combines compression and distortion.
CompDistDly
Combines compression, distortion, and
delay.
Effect Type Var Description
AutoWah Vintage automatic wah effect.
TouchWah Classic volume-responsive wah effect.
TouchWahDist
Touch wah with distortion applied at the
output.
Effect Type Rev Var Description
SPX Hall 
Emulation of hall acoustics using an
algorithm derived from the classic
Yamaha SPX1000 Digital Multi-Effects
Processor.
SPX Room 
Emulation of room acoustics using an
algorithm derived from the classic
Yamaha SPX1000 Digital Multi-Effects
Processor.
SPX Stage 
Emulation of stage acoustics using an
algorithm derived from the classic
Yamaha SPX1000 Digital Multi-Effects
Processor.
R3 Hall
Emulation of the acoustics of a con-
cert hall using an algorithm derived
from the Yamaha ProR3 – a digital
reverberator for professional-audio
applications.
R3 Room
Emulation of room acoustics using an
algorithm derived from the above-
mentioned Yamaha ProR3.
R3 Plate
Emulation of plate reverb using an
algorithm derived from the above-
mentioned Yamaha ProR3.
EarlyRef
Early reflections without any subse-
quent reverberation.
GateReverb Simulation of gated reverb.
ReverseGate
Simulation of gated reverb played in
reverse.
Internal Design of the DTX700
DTX700 Reference Manual
9
Chorus
Chorus reproduces the sound of multiple instruments play-
ing in unison for a thicker, deeper tone. As all instruments
differ slightly from each other in terms of pitch and phase,
their playing together produces an overall sound that is
warmer and more spacious. In order to reproduce this type
of behavior, chorus effects make use of delay. Specifically, a
delayed, second version of the original signal is produced
and given a vibrato-type effect by varying its delay time over
a period of approximately one second using an LFO. When
this second version is mixed back into the original signal,
the resulting tone sounds as if multiple instruments are
being played in unison.
Tremolo & Rotary
Tremolo effects are characterized by the way in which they
modulate volume in a cyclical fashion. An auto-pan effect,
meanwhile, moves the sound from left to right in a similar
cyclical manner, and a rotary speaker effect simulates the
distinctive vibrato of rotary-type speakers often used with
organs. In a rotary speaker, the horn and rotor are spun in
order to create highly unique sounds using the Doppler
Effect.
Delay
Delay effects create a delayed version of the input signal,
and as such, they can be used for many different purposes,
such as creating a sense of spaciousness or thickening a
sound.
Miscellaneous
This category contains effect types not included in the other
categories.
Effect Type Var Cho Description
G Chorus 
Rich, deep chorus with complex mod-
ulation.
2 Modulator 
Chorus effect allowing pitch and
amplitude modulation to be adjusted
for a more natural, spacious tone.
SPX Chorus 
Enhances modulation and spacious-
ness using a 3-phase LFO.
Symphonic 
Multi-stage modulation for a wider-
sounding chorus.
Ensemble
Modulation-free chorus achieved by
adding a slightly pitch-shifted sound.
Effect Type Var Description
AutoPan
Cyclically moves the sound between left
and right channels.
Tremolo
Cyclically modulates the volume of the pro-
cessed signal.
RotarySp Rotary speaker simulator.
Effect Type Var Description
CrossDelay
A pair of delays featuring cross-over feed-
back to produce a sound that swirls
between the left and right channels.
TempoCros-
Dly
A pair of delays with cross-over feedback
and a tempo-synchronized delay time.
TempoDly-
Mono
A single mono delay synchronized with the
instrument’s tempo.
TempoDlySt
A stereo delay synchronized with the instru-
ment’s tempo.
Delay LR
A delay with separate left and right chan-
nels.
Delay LCR
A triple delay processing left, right, and cen-
ter channels independently.
Delay LR St
A stereo delay with fully independent left
and right channels.
Effect Type Var Description
Isolator
Controls the volume of individual frequency
bands using powerful filters.
Telephone
Reproduces the sound of telephone speech
by cutting high and low frequencies.
TalkingMod
Incorporates a vowel-type formant into the
input signal.
PitchChange Changes the pitch of the input signal.
Internal Design of the DTX700
DTX700 Reference Manual
10
Effect Parameters
Each of the above-mentioned effects includes a range of param-
eters allowing you to adjust the way in which it processes the
input signal. Using these parameters, the behavior of each
effect can be optimized in line with, for example, the type of
sound being processed or the type of music being played. While
the function of each of these parameters is described in the fol-
lowing table, it is good practice to also listen to how they actu-
ally change the sound of the respective effect in order to
achieve the best settings.
Parameters with identical names
NOTE
Certain effects contain parameters with identical names
yet performing different functions. In the following table,
the function of each such parameter is described sepa-
rately and the corresponding effects are identified.
Parameter
name
Descriptions
AMDepth
This parameter is used to set the depth of ampli-
tude modulation.
AmpType
This parameter is used to set the type of amplifier
to be simulated.
Attack
This parameter is used to set the amount of time
that elapses before compression is fully applied.
Bottom
*1
This parameter is used to set the lowest point in
the filter’s sweep range.
Color
*2
This parameter is used to set the fixed phase mod-
ulation.
CommonRel
This parameter is used to set the amount of time
that elapses before the compressor stops process-
ing the input signal (common for all three bands).
Compres
This parameter is used to set the input-signal level at
which the compressor starts to process the sound
(i.e., the threshold).
Cutoff
This parameter is used to set the offset value for
the filter’s control frequency.
Delay
This parameter is used to set the delay time in
terms of note lengths.
DelayC
This parameter is used to set the delay time for the
center channel.
DelayL
This parameter is used to set the delay time for the
left channel.
DelayL>R
This parameter is used to set the time that elapses
between input of sound via the left channel and
output via the right channel.
DelayR
This parameter is used to set the delay time for the
right channel.
DelayR>L
This parameter is used to set the time that elapses
between input of sound via the right channel and
output via the left channel.
Density
[Reverb effects other than EarlyRef]
This parameter is used to set the reverb density.
[Early Ref]
This parameter is used to set the density of early
reflections.
Depth
This parameter is used to set the amplitude of the
LFO wave that controls cyclic changes in phase
modulation.
Detune
This parameter is used to set the degree to which
pitches are detuned.
Device
This parameter is used to select one of a number
of devices that distort the sound in different ways.
Diffuse
[TempoPhaser and EarlyRef]
This parameter is used to adjust the spaciousness
of the sound produced.
[Reverb effects other than EarlyRef]
This parameter is used to set how wide the reverb
sounds.
Directn
This parameter is used to set the direction of enve-
lope-follower modulation.
Div.FreqH
This parameter is used to set the mid-high fre-
quency when splitting the sound into three bands.
Div.FreqL
This parameter is used to set the low-mid fre-
quency when splitting the sound into three bands.
DlyLvlC
This parameter is used to set the delay volume for
the center channel.
DlyMix
This parameter is used to set the mixing level for
the delayed sound.
DlyOfst
This parameter is used to set the modulation delay
times offset value.
Drive
This parameter is used to set the degree to which
the effect is applied.
DriveHorn
This parameter is used to set the depth of modula-
tion produced through rotation of the high-fre-
quency horn.
DriveRotor
This parameter is used to set the depth of modula-
tion produced through rotation of the low-frequency
rotor.
DstL.Gain
This parameter is used to set the degree by which
the low frequencies from the distorted sound are
boosted or cut.
DstM.Gain
This parameter is used to set the degree by which
the mid frequencies from the distorted sound are
boosted or cut.
Edge
This parameter is used to specify a curve that
determines how the sound is distorted.
EQ1Freq
This parameter is used to set the cutoff frequency
for the EQ1 band (i.e., low shelving).
EQ1Gain
This parameter is used to set the gain for the EQ1
band (i.e., low shelving).
EQ2Freq
This parameter is used to set the center frequency
for the EQ2 band.
EQ2Gain
This parameter is used to set the gain for the EQ2
band.
EQ2Q
This parameter is used to set the resonance of the
EQ2 band.
EQ3Freq
This parameter is used to set the center frequency
for the EQ3 band.
EQ3Gain
This parameter is used to set the gain for the EQ3
band.
Parameter
name
Descriptions
*1: The Bottom parameter’s setting is valid only when less than that
of the Top parameter.
*2: The Color parameters setting has no effect with certain combi-
nations of Mode and Stage settings.
Internal Design of the DTX700
DTX700 Reference Manual
11
EQ3Q
This parameter is used to set the resonance of the
EQ3 band.
EQ4Freq
This parameter is used to set the center frequency
for the EQ4 band.
EQ4Gain
This parameter is used to set the gain for the EQ4
band.
EQ4Q
This parameter is used to set the resonance of the
EQ4 band.
EQ5Freq
This parameter is used to set the cutoff frequency
for the EQ5 band (i.e., high shelving).
EQ5Gain
This parameter is used to set the gain for the EQ5
band (i.e., high shelving).
ER/Rev
This parameter is used to set the relative volumes
of early reflections and reverberation.
F/RDpth
This parameter is used to set the front-to-rear pan
depth (and is valid only when PanDirectn is set to
“Lturn” or “Rturn”).
FBHiDmp
This parameter is used to set how the feedback
sound decays in the high-frequency band (with
smaller values corresponding to faster decay).
FBLevel
[Chorus effects, Delay effects, and TempoFlanger]
This parameter is used to set how much of the
delay sound is fed back into the effect’s input (with
negative values indicating that its phase is to be
inverted).
[TempoPhaser]
This parameter is used to set how much of the
phaser’s output is fed back into its input (with nega-
tive values indicating that its phase is to be
inverted).
[Reverb effects]
This parameter is used to set the initial delay’s feed-
back level.
FBLvl1
This parameter is used to set the feedback level for
the first delay sound.
FBLvl2
This parameter is used to set the feedback level for
the second delay sound.
FBTime
This parameter is used to set the feedback delay
time.
FBTime1
This parameter is used to set the delay time for
feedback delay 1.
FBTime2
This parameter is used to set the delay time for
feedback delay 2.
FBTimeL
This parameter is used to set the delay time for the
left feedback delay.
FBTimeR
This parameter is used to set the delay time for the
right feedback delay.
Feedback
This parameter is used to set how much of the
effect’s output is fed back into its input.
Fine1
This parameter is used to adjust the first fine-pitch
setting.
Fine2
This parameter is used to adjust the second fine-
pitch setting.
H.Freq
This parameter is used to set the center frequency
of the high-frequency EQ band.
H.Gain
This parameter is used to set the amount by which
the high-frequency EQ band is boosted or cut.
Height
This parameter is used to set the height of the simu-
lated room.
Parameter
name
Descriptions
HiAtk
This parameter is used to set the amount of time
that elapses before compression is fully applied in
the high-frequency band.
HiGain
This parameter is used to set the output level of the
high-frequency band.
HiLvl
This parameter is used to set the high-frequency
level.
HiMute
This parameter is used to activate and deactivate
high-frequency muting.
HiRat
[MltBndComp]
This parameter is used to set the compression
ratio for the high-frequency band.
[Reverb effects]
This parameter is used to adjust the high-fre-
quency component.
HiTh
This parameter is used to set the input-signal level
at which the compressor starts to process the
sound in the high-frequency band.
HornF
This parameter is used to set the speed of rotation
of the high-frequency horn at the “fast” setting.
HornS
This parameter is used to set the speed of rotation
of the high-frequency horn at the “slow” setting.
HPF
This parameter is used to set the high-pass filter’s
cutoff frequency.
InitDly
This parameter is used to set the amount of time
that elapses before early reflections are produced.
InitDly1
This parameter is used to set the delay time for the
first delay.
InitDly2
This parameter is used to set the delay time for the
second delay.
InitDlyL
This parameter is used to set the delay time for the
left-channel delay.
InitDlyR
This parameter is used to set the delay time for the
right-channel delay.
InpMode
This parameter is used to switch between mono
and stereo input.
InpSelect This parameter is used to select an input.
L.Freq
This parameter is used to set the center frequency
of the low-frequency EQ band.
L.Gain
This parameter is used to set the amount by which
the low-frequency EQ band is boosted or cut.
L/RDiffuse
This parameter is used to set the difference
between left and right delay times in order to pro-
duce a more spacious sound.
L/RDpth
This parameter is used to set the depth of the left-
right panning effect.
Lag
This parameter is used to set a time lag for delay
times specified in terms of note lengths.
LFODpth
[SPX Flanger, TempoFlanger, SPX Chorus, and
Symphonic]
This parameter is used to set the depth of modula-
tion.
[Tempo Phaser]
This parameter is used to set the depth of phase
modulation.
LFODiff
This parameter is used to set the left-right phase
difference between modulation waveforms.
Parameter
name
Descriptions
Internal Design of the DTX700
DTX700 Reference Manual
12
LFOSpeed
[TempoFlanger, G Chorus, 2 Modulator, SPX Cho-
rus, Symphonic, and Tremolo]
This parameter is used to set the modulation fre-
quency.
[TempoPhaser]
This parameter is used to set the modulation
speed in terms of note lengths.
[AutoPan]
This parameter is used to set the auto-pan fre-
quency.
LFOWave
[AutoWah]
This parameter is used to specify whether the filter-
sweep effect is produced using a sine or square
wave.
[AutoPan]
This parameter is used to set the panning curve.
Livenss
This parameter is used to set the way in which
early reflections decay.
LowAtk
This parameter is used to set the amount of time
that elapses before compression is fully applied in
the low-frequency band.
LowGain
This parameter is used to set the output level of the
low-frequency band.
LowLvl
This parameter is used to set the low-frequency
level.
LowMute
This parameter is used to activate and deactivate
low-frequency muting.
LowRat
[MltBndComp]
This parameter is used to set the compression
ratio for the low-frequency band.
[Reverb effects]
This parameter is used to adjust the low-frequency
component.
LowTh
This parameter is used to set the input-signal level
at which the compressor starts to process the
sound in the low-frequency band.
LPF
This parameter is used to set the low-pass filter’s
cutoff frequency.
M.Freq
This parameter is used to set the center frequency
of the mid-frequency EQ band.
M.Gain
This parameter is used to set the amount by which
the mid-frequency EQ band is boosted or cut.
M.Width
This parameter is used to set the width of the mid-
frequency EQ band.
Manual
This parameter is used to set the phase-modula-
tion offset value.
MicAngl
This parameter is used to set the left-right inclina-
tion of the microphone used to capture the
speaker’s output.
MidAtk
This parameter is used to set the amount of time that
elapses before compression is fully applied in the
mid-frequency band.
MidGain
This parameter is used to set the output level of the
mid-frequency band.
MidLvl
This parameter is used to set the mid-frequency
level.
MidMute
This parameter is used to activate and deactivate
mid-frequency muting.
MidRat
This parameter is used to set the compression
ratio for the mid-frequency band.
Parameter
name
Descriptions
MidTh
This parameter is used to set the input-signal level
at which the compressor starts to process the
sound in the mid-frequency band.
MixLvl
This parameter is used to set how much of the
effect sound is mixed back into the dry sound.
Mode
This parameter is used to adjust the mode of oper-
ation of the phaser.
MoveSpeed
This parameter is used to specify the amount of
time that elapses until the sound set using the
Vowel parameter is produced.
On/Off
This parameter is used to activate and deactivate
the isolator.
OutLvl This parameter is used to set the output level.
OutLvl1
This parameter is used to set the first-stage output
level.
OutLvl2
This parameter is used to set the second-stage
output level.
Output This parameter is used to set the output level.
OverDr
This parameter is used to adjust the way in which
the sound distorts.
Pan1
This parameter is used to set the first stereo-pan-
ning position.
Pan2
This parameter is used to set the second stereo-
panning position.
PanDirectn This parameter is used to set the auto-pan type.
PhShiftOfst
This parameter is used to set the phase-modula-
tion offset value.
Pitch1
This parameter is used to set the first pitch in semi-
tone units.
Pitch2
This parameter is used to set the second pitch in
semi-tone units.
PMDepth
This parameter is used to set the depth of pitch
modulation.
Presenc
Often seen on guitar amplifiers and the like, this
parameter is used to control the high-frequency
band.
Ratio
This parameter is used to set the compression
ratio.
Release
This parameter is used to set the amount of time
that elapses until the sound is no longer being
compressed.
Resonance
This parameter is used to set the resonance of the
filter.
ResoOfst
This parameter is used to set the resonance offset
value.
RevDly
This parameter is used to set the interval between
early reflections and subsequent reverberation.
RevTime This parameter is used to set the reverb time.
RoomSize This parameter is used to set the size of the room.
Rotor/Horn
This parameter is used to set the relative volumes
of the high-frequency horn and the low-frequency
rotor.
RotorF
This parameter is used to set the speed of rotation
of the low-frequency rotor at the “fast” setting.
RotorS
This parameter is used to set the speed of rotation
of the low-frequency rotor at the “slow” setting.
Sens
This parameter is used to set how sensitive the
wah filter is to changes in the input level.
Parameter
name
Descriptions
Internal Design of the DTX700
DTX700 Reference Manual
13
*3: The Top parameter’s setting is valid only when equal to or
greater than that of the Bottom parameter.
DTX700 Internal Memory
By storing kits, songs, and waves that you have created and edited
in the DTX700’s internal memory, you ensure that they will be
always available for use, even after the instrument has been turned
off. In addition, trigger setups and the settings from the Menu
area’s Utility pages can also be stored in memory for reuse.
Data Retained by the DTX700
The following types of setting data can be stored in the
DTX700’s internal memory.
•Kits
Songs
•Waves
Trigger setups
Other utility settings
NOTE
Whenever data files are saved and loaded or waves and
MIDI files are imported, the corresponding data is automati-
cally stored in memory. Settings cannot be stored for a cer-
tain number of parameters.
Saving & Loading Data Files
All of the above-mentioned items of data that can be stored in
the DTX700’s internal memory can also be saved as files on a
USB storage device. Whenever needed, furthermore, these
memory files can be loaded back into the drum trigger module
from the storage device. For details, see the description of the
File pages from the Menu area (see page57).
S-FTmHorn
This parameter is used to set how long it takes for
the high-frequency horn to switch between fast and
slow rotation speeds.
S-FTmRotor
This parameter is used to set how long it takes for
the low-frequency rotor to switch between fast and
slow rotation speeds.
Speaker
This parameter is used to select the type of
speaker to be simulated.
Speed
[PhaserMono and PhaserStereo]
This parameter is used to set the frequency of the
LFO that controls cyclic changes in phase modula-
tion.
[AutoWah]
This parameter is used to set the LFO speed.
SpeedCtrl
This parameter is used to set the rotation speed as
“fast” or “slow”.
Spread
This parameter is used to set how wide the effect’s
output sounds.
Stage
This parameter is used to set the number of phase-
filter steps.
Thresh
This parameter is used to set the input-signal level
at which the effect starts to process the sound.
To p
*3
This parameter is used to set the highest point in
the filter’s sweep range.
Ty pe
[Wah effects]
This parameter is used to set the wah-effect type.
[EarlyRef, GateReverb, and ReverseGate]
This parameter is used to set the reflected-sound
type.
Vowel This parameter is used to select a vowel type.
Parameter
name
Descriptions
DTX700 Reference Manual 14
Cursor Operations on Menu Area Pages
The way in which the cursor is displayed and oper-
ated on Menu area pages differs from that of other
pages.
Navigation pages
When you turn the dial on navigation-type pages, the cursor
(i.e., the inverted text) moves in the corresponding direction.
By pressing the dial, you can move one level further into the
Menu area.
To move back one step towards the top page, press the [EXIT]
button.
Parameter pages
When you turn the dial on parameter-type pages, the cursor
(i.e., the inverted text) moves up and down within the displayed
list.
When you press the dial, the cursor will zoom in on the value
on the right.
In this condition, you can turn the dial to change the value
selected by the cursor.
When you press the dial again, the cursor will zoom out to
select the entire row.
DTX700 Reference Manual 15
KIT
: The current kit number is reduced by 1.
: The current kit number is increased by 1.
: The current kit number is locked.
NOTE
If you hold down the [SHIFT] button and press the [F1] or [F2]
button, the current kit number will be reduced or increased in
units of 10.
See page 14 for details regarding cursor operations on Menu
area pages.
KIT/COMMON
List of Functions
Volume
Use this parameter to set the volume of the entire kit.
Settings: 0 to 127
NOTE
If you change the Volume parameter setting for MIDI channel
10 on the Menu area’s Kit/MIDI/Other page, the Volume
parameter on this page will be automatically set to the same
value. The reverse does not apply, however – in other words,
the Volume parameter for MIDI channel 10 from the Menu
area’s Kit/MIDI/Other page is not affected by changes made on
this page.
Tempo
Use this parameter to specify the tempo to be set automatically
upon selection of the current drum kit. An “off” setting means
that the tempo will not change automatically when the current kit
is selected – in other words, the tempo of the previously selected
kit is maintained.
Settings: off, 30 to 300
NOTE
If waves are assigned to any of the kit’s pads, the tempo (or
speed) at which they are played will not be affected by the kit’s
tempo setting.
Trigger Setup Link (TrgSetupLink)
Use this parameter to specify the trigger setup to be used when
the current kit is selected. A trigger setup can be assigned to each
different drum kit. Select “off” if the currently selected drum kit
does not need a special trigger setup.
Settings: off, 1 to 20
Name
Use this parameter to set a name for the currently-selected kit. A
name of up to 12 characters in length can be assigned to drum
kits.
Setting a Kit Name
1. Press the dial to call up the kit naming page.
2. Move the cursor within the name field using the [F1] and
[F3] buttons and select a character for that position by
turning the dial or pressing the [-/DEC] and [+/INC] but-
tons. The following characters can be used.
NOTE
If you hold down the [SHIFT] button and press the [F1]
or [F3] button, the cursor will move to the start or end of
the kit name field.
If you hold down the [SHIFT] button and press the [-/
DEC] or [+/INC] button, or alternatively, hold down the
[SHIFT] button and turn the dial, the cursor will jump
between the “ , “0”, “A, “a”, and “~” characters.
3. When you have entered the required name, press the dial
or the [EXIT] button to return to the previous page.
4. Press the [STORE] button and the dial to store your new
setting.
For settings affecting entire kits
KIT/COMMON
Common
Volume
Tempo
TrgSetupLink
Name
Icon
KIT
DTX700 Reference Manual
16
Icon
An artist’s impression of what the current kit might look like can
be displayed on the right of the Kit page (accessed using the
[KIT] button). Using the Icon parameter, you can change the
illustration used for the kit. In addition, you can also select “off”
to display no icon.
Settings: Acoustic, Rock, Electric, Percuss, RhythmBox, Effect,
R&B/H-HOP, PadSong, off
KIT/VOICE
List of Functions
The makeup of the Kit/Voice page depends on the
currently selected voice among other settings.
If a voice (i.e., not a song or MIDI note number) has
been selected for the current pad (see page17):
If a song has been selected for the current pad (see
page17):
If a MIDI note number has been selected directly (see
page18):
For voice-related settings
KIT/VOICE 1/6
Voice
VoiceCategory
VoiceNumber
Tune
Note
Volume
Pan
Attack
Decay
Release
Filter
Q
VarSend(Dry)
ChoSend
RevSend
Mono/Poly
AltGroup
SliderSelect
KIT
DTX700 Reference Manual
17
[Page displayed when a voice has been selected
for the current pad]
q Current pad
This indicates the pad for which voice settings are being made.
You can change the current pad either by hitting a different one or
by pressing the [F1] button (PAD) to open the popup window and
turning the dial to make a selection.
PAD
This button is used to select the current pad. When pressed, a
popup window will appear, and you can then turn the dial to
change the pad. Press the [EXIT] button to return from the popup
window. You can also strike a pad to select it. Instead of selecting
a pad, meanwhile, you can specify a MIDI note number directly.
Settings: SnareHd, SnareOp, SnareCl, SnrHdOff, SnrOpOff,
Snr C l O ff, To m 1 H d , To m 1 R m 1 , To m 1 R m 2 , To m 2 H d ,
Tom2Rm1, Tom2Rm2, Tom3Hd, Tom3Rm1, Tom3Rm2,
RideBw, RideEg, RideCp, Crash1Bw, Crash1Eg,
Crash1Cp, Crash2Bw, Crash2Eg, Crash2Cp, HHBwOp,
HHEgOp, HHBwCl, HHEgCl, HHFtCl, HHSplsh, Kick,
Pad10, Pad11Hd, Pad11Rm1, Pad11Rm2, HHKick, C#-1
to A#5
+ PAD LOCK
This button combination is used to fix the pad indicated by q.
This means that you can play other pads without changing the
current selection.
LAYER
This button is used to select the layer you wish to set. Each pad
comprises up to four layers, each of which can be used to play a
different voice.
NOTE
On this page, layers can be selected for a pad only when a
MIDI note number has been assigned to more than one of
them using the Note parameter from the Menu area’s Kit/MIDI/
Assign page.
AUDITION
This button can be pressed to hear the set voice without having to
play the pad.
VoiceCategory
Use this parameter to specify the category from which a voice
will be assigned. In addition, you can also indicate that a song or
wave is to be assigned.
Settings: Kick, Snare1, Snare2, Tom1, Tom2, Cymbal, Hi-Hat, Lat-
inPerc, AsiaPerc, AfrcArbcPerc, OrchPerc,
ElectricPerc, EFX, Melody, Wave, e Song
VoiceNumber
Use this parameter to specify the number of the voice to be
assigned.
[Page displayed when a song has been selected
for the current pad]
PLAYMODE (Song Playback Mode)
This button is used to set a playback mode when a song has been
assigned to the current pad.
NOTE
Up to three songs can be played simultaneously.
If the VoiceCategory parameter is set to “eSong”, no other pan-
els will be displayed for this page.
q
Play: The song will start playing from the begin-
ning.
Chase: One successive measure of the song will
be played each time you strike the pad.
Cut-off: Only one song set to this mode can play
at any time. In other words, whenever a cut-off
mode song is triggered, any other song already
playing in this mode will be automatically
stopped.
KIT
DTX700 Reference Manual
18
[Page displayed when a MIDI note number has
been selected directly using the [F1] button (PAD)]
NOTE
The VoiceCategory parameter cannot be set to “eSong” when
a MIDI note number is selected directly.
The parameter used for tuning will depend on the
type of voice assigned to the current pad.
[Drum sounds or waves (i.e., imported audio files)]
[When VoiceCategory is “Melody”]
Tuning (Tune)
Use this parameter to adjust the tuning of the assigned voice in
one-cent steps (0.01 = 1 cent)
Settings: -24.00 to +0.00 to +24.00
NOTE
A cent is a unit of pitch defined as one hundredth of a semi-
tone. (100 cents = 1 semitone)
Note
Use this parameter to set the pitch of the assigned voice as a
MIDI note number.
Settings: C-2 to G8
Volume
Use this parameter to set the volume of the voice.
Settings: 0 to 127
Voice Panorama (Pan)
Use this parameter to set the stereo pan of the voice.
Settings: L63 to C to R63
The following parameters are used to adjust the tone
of the voice.
Attack Time (Attack)
Use this parameter to set the amount of time it takes from when
the pad is struck until the assigned voice reaches its peak volume.
Settings: -64 to +0 to +63
Decay Time (Decay)
Use this parameter to set the amount of time it takes the voice to
drop to a steady level after reaching its peak level.
Settings: -64 to +0 to +63
Release Time (Release)
Use this parameter to set the amount of time it takes for the voice
to fade out after sending a MIDI Note Off message.
Settings: -64 to +0 to +63
NOTE
MIDI Note Off messages are not sent for pads and layers for
which the RcvKeyOff (Receive Key Off) parameter from the
Menu area’s Kit/MIDI/Assign page is set to “off. Therefore, the
release-time setting has no effect in such a case.
With certain types of voices, modifying the tone parameters
above will have very little effect.
KIT/VOICE 2/6
KIT/VOICE 3/6
KIT
DTX700 Reference Manual
19
Filter Cutoff Frequency (Filter)
Use this parameter to set a cutoff frequency for the low-pass fil-
ter. Frequencies above this level will be removed from the
selected voice.
Settings: -64 to +0 to +63
Filter Resonance (Q)
Use this parameter to change the timbre of the voice by boosting
frequencies around the cutoff frequency.
Settings: -64 to +0 to +63
Using the following parameters, you can adjust the
degree to which the DTX700’s built-in variation, cho-
rus, and reverb effects are applied to individual
voices.
Variation Send Level (VarSend(Dry))
Use this parameter to specify how much of the sound produced
by the voice will be sent to the variation effect. (The dry level is
shown in parentheses.)
Settings: 0 to 127
NOTE
If layers have been set for the current voice, you can set a
send level for each one.
Chorus Send Level (ChoSend)
Use this parameter to specify how much of the sound produced
by the voice will be sent to the chorus effect.
Settings: 0 to 127
NOTE
The chorus send level for the entire kit can be adjusted using
the ChoSend (Chorus Send Level) parameter from the Menu
area’s Kit/Effect/Mixer page.
If layers have been set for the current voice, you can set a
send level for each one.
Reverb Send Level (RevSend)
Use this parameter to specify how much of the sound produced
by the voice will be sent to the reverb effect.
Settings: 0 to 127
NOTE
The reverb send level for the entire kit can be adjusted using
the Reverb Send Level (RevSend) parameter from the Menu
area’s Kit/Effect/Mixer page.
If layers have been set for the current voice, you can set a
send level for each one.
Polyphony (Mono/Poly)
Use this parameter to specify how overlapping sounds from the
same pad will be treated.
Settings: mono, poly
KIT/VOICE 4/6
KIT/VOICE 5/6
KIT/VOICE 6/6
mono
When two overlapping sounds are produced by
striking the same pad, the latter sound is given pri-
ority and the earlier sound is silenced.
poly
No such restriction applies and all overlapping
sounds are output.
KIT
DTX700 Reference Manual
20
Alternate Group (AltGroup)
Use this parameter to assign voices to alternate groups (i.e.,
monophonic sets of pads, only one of which can be producing a
sound at any time). If you do not want various individual voices
to be played together, they should be assigned to the same alter-
nate group. Whenever voices from the same alternate group are
triggered by playing the pads, the latter voice is given priority and
the earlier one is silenced. Set this parameter to “off” if you do
not want to assign to an alternate group.
Settings: off, hhOpen, hhClose, 1 to 124
NOTE
The “hhOpen” and “hhClose” alternate groups operate in a
special way: If a voice from the “hhClose” group is triggered
after a voice from the “hhOpen” group, the hhOpen voice is
silenced and only the hhClose voice is played. No silencing of
the earlier sound is performed for any other triggering
sequence (for example, hhOpen followed by hhOpen; hhClose
followed by hhOpen; or hhClose followed by hhClose).
SliderSelect
Use this parameter to select the slider for controlling the volume
of the current pad’s voices.
Settings: kick, snare, tom, cymbal, hihat, no asg (selected when
no assignment is required)
KIT/MIDI
List of Functions
MessageType
Use this parameter to set the type of MIDI message that will be
sent whenever the current pad is struck.
For MIDI-related settings
KIT/MIDI/ASSIGN 1/5
note
A MIDI note will be sent. Use this setting if you wish
to produce a sound by striking the pad.
CC A Control Change message will be sent.
PC A Program Change message will be sent.
start
A sysex Start command (hexadecimal FA) will be
sent.
continue
A sysex Continue command (hexadecimal FB) will
be sent.
stop
A sysex Stop command (hexadecimal FC) will be
sent.
MIDI
Assign
MessageType
Mode
Note
MIDI Ch
GateTime
RcvKeyOff
TrgLink
MaskTime
VelLimitLo
VelLimitHi
VelCrossFade
TrgVel
TrgMonoPoly
Trg Al t G rp
TG MIDI Sw
TG Switch
MIDI Switch
Other
Transmit
Volume
Pan
MSB
LSB
PC
VarSend(Dry)
ChoSend
RevSend
CC No
CC Val
KIT
DTX700 Reference Manual
21
Playing Mode (Mode)
Use this parameter to set Stack, Alternate, or Hold as the playing
mode for the current pad.
Settings: stack, alternate, hold
NOTE
If no note numbers have been assigned to any of the pad’s lay-
ers (A to D) using the Note parameter (also from the Menu
area’s Kit/MIDI/Assign page), this setting will be displayed as
“---” and modification will not be possible.
Note
Use this parameter to select a MIDI note to be sent by the current
layer. You can also choose either of the following two special set-
tings.
Settings: off, C#-2/1 to F#8/126, skip
NOTE
Voices cannot be assigned to any note numbers on MIDI chan-
nel 10 that are displayed in parentheses – for example, “(C#-2/
1)”. If one of these numbers is selected, therefore, the settings
for the VoiceCategory and VoiceNumber parameters from the
Menu area’s Kit/Voice page will be displayed as “---”.
Notes on MIDI channel 10 having already been assigned to a
layer will be displayed with an asterisk in front of them – for
example, “*C3”.
MIDI Channel (MIDI Ch)
Use this parameter to set the MIDI channel for the current layer’s
MIDI messages.
Settings: 1 to 16
NOTE
If no note numbers have been assigned to any of the pad’s lay-
ers (see page4), this setting will be displayed as “---” and
modification will not be possible.
KIT/MIDI/ASSIGN 2/5
stack
When Stack mode is selected, all notes assigned to
the pad are triggered simultaneously. For example,
you can use this mode to produce chords or to trig-
ger multiple voices and waves with a single strike.
To produce just a single sound, select this mode and
assign only one voice to the pad.
alternate
When Alternate mode is selected, the notes
assigned to the pad are played individually in turn
each time it is struck. For example, you can use this
mode to produce a different sound each time you
strike the pad.
alternate
When Hold mode is selected, the notes assigned to
the pad are alternately turned on and off each time it
is struck. If, for example, a sustained sound has
been assigned, the first strike of the pad will turn it
on, the next strike will turn it off, and so on.
off
Regardless of the current setting of the Mode
parameter, no MIDI note is sent when the pad is
struck.
skip
If “alternate” has been selected for the Mode param-
eter, this layer will be skipped. In other words, no
MIDI note will be sent when it is this layer’s turn to
play. Alternatively, if “stack” or “hold” has been
selected for the Mode parameter, this setting has the
same effect as “off” above (i.e., no MIDI note will be
sent for this layer).
KIT
DTX700 Reference Manual
22
GateTime
Use this parameter to set a gate time for MIDI notes sent for the
current layer. A MIDI Note On message is sent when a pad is
struck, and the corresponding Note Off message is sent a short
time later. The duration between sending of these signals is
referred to as the “gate time”, and by adjusting this setting, you
can control the duration of MIDI notes.
Settings: 0.0s to 9.9s
NOTE
If no note numbers have been assigned to any of the pad’s lay-
ers (A to D) using the Note parameter (also from the Menu
area’s Kit/MIDI/Assign page), this setting will be displayed as
“---” and modification will not be possible.
If the Mode parameter (also from the Menu area’s Kit/MIDI/
Assign page) has been set to “hold”, this setting will be dis-
played as “---” and modification will not be possible.
MIDI Note Off messages are not sent for pads and layers for
which the RcvKeyOff (Receive Key-off) parameter (also from
the Menu area’s Kit/MIDI/Assign page) is set to “off. If you wish
to set a gate time, therefore, be sure to set RcvKeyOff to “on.
Receive Key-off (RcvKeyOff)
Use this parameter to specify whether or not MIDI Note Off mes-
sages are to be sent for the current layer. Most drum voices are
one-shot sounds that decay quickly over time until they become
silent; therefore, MIDI Note Off messages are not needed to stop
them. As such, this parameter should normally be set to “off”. If,
however, a non-decaying sound is assigned to a pad or layer, you
can ensure that the required MIDI Note Off message is sent by
setting this parameter to “on”. In addition, you can use the Gate-
Time parameter (also from the Menu area’s Kit/MIDI/Assign
page) to adjust the amount of time that passes between striking of
the pad and sending MIDI Note Off messages.
Settings: off, on
NOTE
Sending of MIDI Note Off messages occurs automatically
whenever a MIDI Channel other than 10 has been selected for
the pad or layer. In such a case, therefore, this setting will be
displayed as “---” and modification will not be possible.
Trigger Link (TrgLink)
Use this parameter to specify which of the pad’s other triggers
you wish to generate automatically when the current one is
struck. Select “off” to generate only the current trigger. Note that
the available settings will depend on the trigger currently being
set.
Settings: off, rim1, rim2, rim1&2, head, bow, Pad10
MaskTime
Use this parameter to specify the amount of time to wait after
generating the current trigger before it can be generated again.
When set to “2.0s”, for example, the DTX700 ignores the trigger
for two seconds after you hit the corresponding pad or zone.
Settings: off, 20ms to 30.00s
Velocity Limit: Low (VelLimitLo)
Velocity Limit: High (VelLimitHi)
Use these parameters to set the range of velocities within which
the current layer will send a MIDI Note On message. The term
“velocity” refers to the speed (or power) with which a pad is
struck. By setting upper and lower limits using these parameters,
you can prevent sounds from being produced when the pad is
struck too hard or too soft.
Settings: 0 to 127
Velocity Cross Fade (VelCrossFade)
Use this parameter to specify how quickly velocity levels fall off
beyond the velocity limits. With a setting of “0”, for example, no
sound whatsoever will be produced for velocities outside the
range defined by the limits. As you increase this setting, the edges
of the range become less abrupt.
Settings: 0 to 127
KIT/MIDI/ASSIGN 3/5
KIT/MIDI/ASSIGN 4/5
KIT
DTX700 Reference Manual
23
Trigger Velocity (TrgVel)
Use this parameter to control the velocity value of MIDI notes
sent when the current pad is struck.
Settings: variable, 1 to 127
NOTE
If no note numbers have been assigned to any of the pad’s lay-
ers (A to D) using the Note parameter (also from the Menu
area’s Kit/MIDI/Assign page), this setting will be displayed as
“---” and modification will not be possible.
No sound will be produced if you set this parameter to a value
outside the range of velocities set by the VelLimitLo (Velocity
Limit: Low) and VelLimitHigh (Velocity Limit: High) parameters
(also from the Menu area’s Kit/MIDI/Assign page).
Trigger Mono/Poly (TrgMonoPoly)
Use this parameter to control what happens when the current pad
is struck repeatedly in quick succession. If set to “mono”, the pre-
vious sound will be stopped before a new sound starts. If set to
“poly”, meanwhile, previous sounds will not be stopped before a
new sound starts.
Settings: mono, poly
NOTE
If no note numbers have been assigned to any of the pad’s lay-
ers (A to D) using the Note parameter (also from the Menu
area’s Kit/MIDI/Assign page), this setting will be displayed as
“---” and modification will not be possible.
MIDI Note Off messages are not received for pads and layers
for which the RcvKeyOff (Receive Key-off) parameter (also
from the Menu area’s Kit/MIDI/Assign page) is set to “off. If you
wish to set trigger monophony (“mono”), therefore, be sure to
set RcvKeyOff to “on. This will ensure that Note Off messages
are sent to prevent overlapping voices.
Trigger Alternate Group (TrgAltGrp)
Use this parameter to assign the current pad to a trigger alternate
group if so required. Alternate groups are monophonic sets of
pads, and therefore, only one pad from an alternate group can be
producing a sound at any time. If a pad is struck while another
pad from the same alternate group is already producing a sound, a
MIDI Note Off message will be sent for the first pad together
with the MIDI Note On message for the second. In order to use
trigger alternate groups with voices played on MIDI channel 10,
the sending of MIDI Note Off messages must be enabled by
selecting “on” for the RcvKeyOff (Receive Key-off) parameter
(also from the Menu area’s Kit/MIDI/Assign page). Up to 32 trig-
ger alternate groups can be set up on your DTX700. If there is no
need for a pad to be assigned to a trigger alternate group, you can
set this parameter to “off”.
Settings: off, 1 to 32
NOTE
If no note numbers have been assigned to any of the pad’s lay-
ers (A to D) using the Note parameter (also from the Menu
area’s Kit/MIDI/Assign page), this setting will be displayed as
“---” and modification will not be possible.
On the TG MIDI Switch page, you can set up each of
the DTX700’s MIDI channels for sending to the
instrument’s internal tone generator, to external MIDI
devices, or to both.
q MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number.
Settings: 1 to 16
Tone Generator Switch (TG Switch)
Use this parameter to indicate whether MIDI messages produced
by playing pads and changing drum kits should be sent to the
internal tone generator. (Choose “on” to send to the DTX700’s
tone generator.)
Settings: off, on
MIDI Switch
Use this parameter to indicate whether MIDI messages produced
by playing pads and changing drum kits should be output via the
[MIDI OUT] connector on the rear panel or the [USB TO HOST]
port on the side panel. (Choose “on” to output.)
Settings: off, on
KIT/MIDI/ASSIGN 5/5
variable
MIDI velocity values will reflect the strength with
which the pad is struck.
1 to 127
MIDI notes are sent with this fixed velocity value,
regardless of how hard or soft the pad is struck.
KIT/MIDI/TG MIDI SW
q
KIT
DTX700 Reference Manual
24
From the Other page, you can set various MIDI mes-
sages to be sent whenever the kit is changed.
q MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number.
Settings: 1 to 16
Transmit
Use this parameter to indicate which MIDI messages are to be
sent whenever the current kit is selected.
Settings: off, all, PC
Volume
Use this parameter to set the volume value to be sent whenever
the current kit is selected.
Settings: 0 to 127
NOTE
If the Transmit parameter (also from the Menu area’s Kit/MIDI/
Other page) has been set to “off” or “PC”, this setting will be
displayed as “---” and modification will not be possible.
Panorama (Pan)
Use this parameter to set the pan value to be sent whenever the
current kit is selected.
Settings: L63 to C to R63
NOTE
If the Transmit parameter (also from the Menu area’s Kit/MIDI/
Other page) has been set to “off” or “PC”, this setting will be
displayed as “---” and modification will not be possible.
q MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number.
Settings: 1 to 16
MSB
Use this parameter to set a Bank Select MSB value to be sent
whenever the current kit is selected.
Settings: 000 to 127
LSB
Use this parameter to set a Bank Select LSB value to be sent
whenever the current kit is selected.
Settings: 000 to 127
Program Change (PC)
Use this parameter to set a Program Change number to be sent
whenever the current kit is selected.
Settings: 001 to 128
NOTE
If the Transmit parameter (also from the Menu area’s Kit/MIDI/
Other page) has been set to “off, this setting will be displayed
as “---” and modification will not be possible.
KIT/MIDI/OTHER 1/4
off No MIDI messages will be sent.
all
All MIDI messages set on this page (Kit/MIDI/
Other) will be sent.
PC
Only MIDI Program Change messages and Bank
Select MSB and LSB messages will be sent.
q
KIT/MIDI/OTHER 2/4
q
KIT
DTX700 Reference Manual
25
Using the following parameters, you can adjust the
send level to be set for each of the effect units when
the current kit is selected.
q MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number.
Settings: 1 to 16
Variation Send Level (VarSend(Dry))
Use this parameter to set the variation-effect send level to be sent
whenever the current kit is selected.
Settings: 0 to 127
NOTE
If the above MIDI channel (Ch) is set to 10, this setting will be
displayed as “---” and modification will not be possible.
Chorus Send Level (ChoSend)
Use this parameter to set the chorus send level to be sent when-
ever the current kit is selected.
Settings: 0 to 127
Reverb Send Level (RevSend)
Use this parameter to set the reverb send level to be sent when-
ever the current kit is selected.
Settings: 0 to 127
q MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number.
Settings: 1 to 16
Control Change Number (CC No)
Use this parameter to set the type of MIDI Control Change mes-
sage to be sent whenever the current kit is selected. No Control
Change messages are sent when “off” is set.
Settings: off, 1 to 95
Control Change Valve (CC Val)
Use this parameter to set a value for the MIDI Control Change
message sent whenever the current kit is selected.
Settings: 0 to 127
NOTE
If the Transmit parameter (also from the Menu area’s Kit/MIDI/
Other page) has been set to “off” or “PC”, this setting will be
displayed as “---” and modification will not be possible.
If the type of MIDI Control Change message set here matches
one of the following Control Change message types (also set
on the Menu area’s Kit/MIDI/Other page), this parameter’s set-
ting will have priority.
Volume, Pan, VarSend(Dry), ChoSend, and RevSend
KIT/MIDI/OTHER 3/4
q
KIT/MIDI/OTHER 4/4
q
KIT
DTX700 Reference Manual
26
KIT/EFFECT
List of Functions
Variation Return (VarReturn)
Use this parameter to set the level of the return signal from the
variation effect.
Settings: 0 to 127
Variation Panorama (VarPan)
Use this parameter to set the stereo panning of the variation
effect’s return signal.
Settings: L63 to C to R63
Variation to Reverb (VarToRev)
Use this parameter to set the degree to which the output from the
variation effect is sent to the reverb effect.
Settings: 0 to 127
Variation to Chorus (VarToCho)
Use this parameter to set the degree to which the output from the
variation effect is sent to the chorus effect.
Settings: 0 to 127
Chorus Send Level (ChoSend)
Use this parameter to set the chorus-send level for the current kit.
Settings: 0 to 127
Chorus Return Level (ChoReturn)
Use this parameter to set the level of the return signal from the
chorus effect.
Settings: 0 to 127
Chorus Panorama (ChoPan)
Use this parameter to set the stereo panning of the chorus effect’s
return signal.
Settings: L63 to C to R63
Chorus to Reverb (ChoToRev)
Use this parameter to set the degree to which the output from the
chorus effect is sent to the reverb effect.
Settings: 0 to 127
For effect-related settings
KIT/EFFECT/MIXER 1/3
EFFECT
Mixer
VarReturn
VarPan
VarToRev
VarToCho
ChoSend
ChoReturn
ChoPan
ChoToRev
RevSend
RevReturn
RevPan
Variation
Category
Type
Chorus
Type
Reverb
Type
KIT/EFFECT/MIXER 2/3
KIT
DTX700 Reference Manual
27
Reverb Send Level (RevSend)
Use this parameter to set the reverb-send level for the current kit.
Settings: 0 to 127
Reverb Return Level (RevReturn)
Use this parameter to set the level of the return signal from the
reverb effect.
Settings: 0 to 127
Reverb Panorama (RevPan)
Use this parameter to set the stereo panning of the reverb effect’s
return signal.
Settings: L63 to C to R63
Variation Category (Category)
Use this parameter to select a variation-effect category.
Settings: Refer to the Data List document.
Variation Type (Type)
Use this parameter to select a variation-effect type.
Settings: Refer to the Data List document.
NOTE
If the Type parameter is set to “No Effect”, no other panels will
be displayed for this page.
Chorus Type (Type)
Use this parameter to select a chorus-effect type.
Settings: Refer to the Data List document.
NOTE
If the Type parameter is set to “No Effect”, no other panels will
be displayed for this page.
Reverb Type (Type)
Use this parameter to select a reverb-effect type.
Settings: Refer to the Data List document.
NOTE
If the Type parameter is set to “No Effect”, no other panels will
be displayed for this page.
KIT/EFFECT/MIXER 3/3
KIT/EFFECT/VARIATION 1/3
KIT/EFFECT/CHORUS 1/5
KIT/EFFECT/REVERB 1/4
KIT
DTX700 Reference Manual
28
KIT/EQ
List of Functions
Setting the Kit Equalizer
The parameters from the Menu area’s Kit/EQ page
can be used to adjust the kit equalizer that shapes
the tone of voices, songs, and other audio output. In
specific terms, this four-band equalizer allows the
signal level to be freely boosted or cut around a cen-
ter frequency specified for each of the bands. In
addition, the “low” and “high” frequency bands can
be set to either shelving or peaking type equaliza-
tion.
NOTE
Kit equalization affects both drum and melody sounds.
LowGain, LowMidGain, HighMidGain, and HighGain
Use these parameters to boost or cut the center-frequency levels
of the low, low-mid, high-mid, and high frequency bands, respec-
tively.
Settings: -12 to +0 to +12
LowFreq, LowMidFreq, HighMidFreq, and HighFreq
Use these parameters to set the center frequencies of the low, low-
mid, high-mid, and high frequency bands, respectively.
Settings: LowFreq: 32Hz to 2.0kHz when LowShape is set to
“shelving”
63Hz to 2.0kHz when LowShape is set to
“peaking”
LowMidFreq, HighMidFreq: 100Hz to 10kHz
HighFreq: 500Hz to 16kHz
For setting kit equalization
KIT/EQ 1/4 to 4/4
EQ
LowGain
LowFreq
LowQ
LowShape
LowMidGain
LowMidFreq
LowMidQ
HighMidGain
HighMidFreq
HighMidQ
HighGain
HighFreq
HighQ
HighShape
Gain
Low HighMid
LowMid High
Frequency (Hz)
Q
Four EQ bands
KIT
DTX700 Reference Manual
29
Low Resonance (LowQ), Low Mid Resonance (Low-
MidQ), High Mid Resonance (HighMidQ), and High
Resonance (HighQ)
Use these parameters to specify widths for the low, low-mid,
high-mid, and high frequency bands, respectively. If you set a
large value, a narrower band of frequencies will be affected and
the tone will change markedly around the center frequency. If you
set a smaller value, a wider band of frequencies will be affected
and the tone will change gradually around the center frequency.
Settings: 0.1 to 12.0
NOTE
If the LowShape or HighShape parameter has been set to
“shelving”, the corresponding width (Q) setting will be displayed
as “---” and modification will not be possible.
LowShape and HighShape
Use these parameters to set EQ types for the low and high fre-
quency bands, respectively.
Settings: shelving, peaking
Shelving
Signals at all frequencies either above or below the specified
frequency will be boosted or cut.
Peaking
Signals at frequencies in the vicinity of the center frequency
will be boosted or cut.
KIT/PAD
List of Functions
Pad Control Type (PadCtrlType)
When a pad featuring a pad controller is connected to the
DTX700, this parameter can be used to assign a function to it.
Before making a setting, be sure to press the [F1] button (PAD)
and select the trigger input jack that the pad in question has been
plugged into.
Q=0.1
Q=12.0
Frequency (Hz)
Center frequency
EQ low EQ high
Gain
Center
frequency
Gain
Center
frequency
Frequency (Hz) Frequency (Hz)
Gain
Center frequency
Frequency (Hz)
For pad-related settings
KIT/PAD 1/3
off No function is assigned to the pad controller.
snares
By turning the pad controller, you can change the set-
tings of the SnaresOn/Off (Snare Wire On/Off) and
SnaresAdjust (Snare Wire Adjustment) parameters (also
from the Menu area’s Kit/Pad page), thus adjusting the
tightness of the snare wire. For example, turning the pad
controller counter-clockwise progressively loosens the
snare wire, ultimately removing it from the snare. Turning
the pad controller clockwise tightens the snare wire. If the
snare wire is in the removed condition, turn the pad con-
troller clockwise to bring it into contact with the snare.
tuning
By turning the pad controller, you can change the set-
ting of the Tune (Tuning) parameter from the Menu
area’s Kit/Voice page, thus adjusting the pitch of the
drum voice. For example, turning the pad controller
counter-clockwise lowers the pitch and vice-versa.
tempo
By turning the pad controller, you can adjust the song or
click-track tempo. Whenever you are doing so, the dis-
play will show the tempo setting.
filter
By turning the pad controller, you can change the set-
ting of the Filter parameter from the Menu area’s Kit/
Voice page, thus adjusting the tone of the drum voice.
For example, turning the pad controller counter-clock-
wise darkens the tone and vice-versa.
snares
On/Off
By turning the pad controller, you can switch the
SnaresOn/Off (Snare Wire On/Off) parameter (also from
the Menu area’s Kit/Pad page) from “off” to “on” and
vice-versa. For more details, refer to Internal Design of
the DTX700 (see page3).
Pad
PadCtrlType
HH Func
HH MIDI Ch
HH MIDI Type
SnaresOn/Off
SnaresAdjust
SnareBuzz
ResonanceLevel
KIT
DTX700 Reference Manual
30
Settings: off, snares, tuning, tempo, filter, snaresOn/Off
NOTE
The initial default setting of the PadCtrlType (Pad Control Type)
parameter depends on the drum kit selected.
The settings available for the PadCtrlType (Pad Control Type)
parameter depend on the trigger input jack that the pad has
been plugged into. For example, the settings “snares” and
“snaresOn/Off” are available only when the [qSNARE] trigger
input jack is being used.
Hi-hat Function (HH Func)
Use this parameter to specify how a hi-hat controller connected to
the [HI-HAT CONTROL] trigger-input jack is to function.
Settings: hi-hat, MIDI
NOTE
When this parameter is set to “hi-hat” and “on” has been
selected for the SendHH (Send Hi-hat Controller) parameter
from the Menu area’s Utility/MIDI page, Control Change 4
messages corresponding to the degree to which the hi-hat
controller is depressed will be sent to external MIDI devices on
MIDI channel 10.
When this parameter is set to “MIDI”, MIDI messages are sent
regardless of the setting of the SendHH (Send Hi-hat Control-
ler) parameter from the Menu area’s Utility/MIDI page.
Hi-hat MIDI Channel (HH MIDI Ch)
If “MIDI” has been set for the HH Func (Hi-hat Function) param-
eter (also from the Menu area’s Kit/Pad page), use this parameter
to set the MIDI channel for output of the MIDI messages gener-
ated by the hi-hat controller.
Settings: 1 to 16
NOTE
If “hi-hat” has been set for the HH Func (Hi-hat Function)
parameter (also from the Menu area’s Kit/Pad page), this set-
ting will be displayed as “--” and modification will not be possi-
ble.
Hi-hat MIDI Type (HH MIDI Type)
If “MIDI” has been set for the HH Func (Hi-hat Function) param-
eter (also from the Menu area’s Kit/Pad page), use this parameter
to set the type of MIDI messages generated by the hi-hat control-
ler.
Settings: CC01 to CC95 (Control Change), AT (Aftertouch), PBup
(Pitch Bend up), PBdwn (Pitch Bend down)
NOTE
If “hi-hat” has been set for the HH Func (Hi-hat Function)
parameter (also from the Menu area’s Kit/Pad page), this set-
ting will be displayed as “-----” and modification will not be pos-
sible.
Snare Wire On/Off (SnaresOn/Off)
Use this parameter to control the behavior of the pad connected to
the [qSNARE] trigger input jack. If set to “on”, the voices
assigned to the SnareHd, SnareOp, and SnareCl pads will be out-
put. If set to “off”, meanwhile, the voices assigned to the SnrHd-
Off, SnrOpOff, and SnrClOff pads will be output. For more
details, refer to page 3.
Settings: off, on
Snare Wire Adjustment (SnaresAdjust)
Use this parameter to adjust the tightness of the snare wire.
Higher values correspond to tighter snare wires and vice-versa.
Settings: 1 to 15
NOTE
When you adjust this parameter, the Decay parameter* from
the Menu area’s Kit/Voice page also changes. (*: Applies only
when the VoiceCategory parameter has been set to “SnareHd”
or “SnareOp”.)
SnareBuzz
Use this parameter to specify how the snare wire effect resonates
with kick and tom sounds. The higher the setting, the greater the
degree of resonance. Set to “off” to prevent the snare wire from
resonating.
Settings: off, 1 to 5
KIT/PAD 2/3
hi-hat
The hi-hat controller will function in the standard
way for playing the hi-hat cymbal.
MIDI
When you step on the hi-hat controller, a MIDI
message is output in line with the settings of the
HH MIDI Ch (Hi-hat MIDI Channel) and HH MIDI
Type (Hi-hat MIDI Type) parameters below.
KIT/PAD 3/3
KIT
DTX700 Reference Manual
31
ResonanceLevel
Use this parameter to specify whether the toms should resonate
with kick sounds. The higher the setting, the greater the degree of
resonance. Set to “0” to prevent the toms from resonating.
Settings: off, 0 to 5
KIT/JOB
List of Functions
From the Copy Pad page, you can copy settings
from one pad to another within the current drum kit.
Use Pad1 to select the pad whose settings are to be
copied and Pad2 to select the pad whose settings
are to be replaced. Then press the [F3] button (EXE-
CUTE) to copy the settings.
Pad to be copied (Pad1)
Use this parameter to select the pad whose settings are to be cop-
ied.
Pad to be replaced (Pad2)
Use this parameter to select the pad whose settings are to be
replaced.
Settings: SnareHd, SnareOp, SnareCl, SnrHdOff, SnrOpOff,
Snr C l O ff, To m 1 H d , To m 1 R m 1 , To m 1 R m 2 , To m 2 H d ,
Tom2Rm1, Tom2Rm2, Tom3Hd, Tom3Rm1, Tom3Rm2,
RideBw, RideEg, RideCp, Crash1Bw, Crash1Eg,
Crash1Cp, Crash2Bw, Crash2Eg, Crash2Cp, HHBwOp,
HHEgOp, HHBwCl, HHEgCl, HHFtCl, HHSplsh, Kick,
Pad10, Pad11Hd, Pad11Rm1, Pad11Rm2, HHKick, all
(available for Pad2 only)
From the Copy Kit page, you can copy all the set-
tings of any kit and replace those of the current kit,
which can be selected by pressing the [KIT] button.
Use Bank and Number to select the kit whose set-
tings are to be copied, and the press the [F3] button
(EXECUTE) to copy those settings.
Bank
Use this parameter to specify the type of kit to be copied. “PRE”
refers to the Preset kits stored as the DTX700’s default settings,
and “USER” refers to the User kits that can be accessed by press-
ing the [KIT] button to open the Kit page.
Kit Number (Number)
Use this parameter to specify the number of the kit to be copied.
Settings: 01 to 50 when Bank is set to “PRE”
01 to 60 when Bank is set to “USER”
NOTE
Preset kits are permanent settings that serve as DTX700
defaults. Accordingly, you cannot access them by pressing the
[KIT] button or edit this kit data by, for example, changing a
drum voice. For details regarding the makeup of kit data, see
page5.
For kit management tasks
KIT/JOB/COPY PAD
Job
CopyPad
CopyKit
ExchgPad
ExchgKit
ClearPad
ClearKit
KIT/JOB/COPY KIT
KIT
DTX700 Reference Manual
32
From the Exchange Pad page, you can swap the set-
tings of a pair of pads. Use Pad1 and Pad2 to select
the pads, and then press the [F3] button (EXECUTE)
to exchange their settings.
Pad1, Pad2
Use these parameters to select the two pads whose settings are to
be swapped.
Settings: SnareHd, SnareOp, SnareCl, SnrHdOff, SnrOpOff,
Snr C l O ff, To m 1 H d , To m 1 R m 1 , To m 1 R m 2 , To m 2 H d ,
Tom2Rm1, Tom2Rm2, Tom3Hd, Tom3Rm1, Tom3Rm2,
RideBw, RideEg, RideCp, Crash1Bw, Crash1Eg,
Crash1Cp, Crash2Bw, Crash2Eg, Crash2Cp, HHBwOp,
HHEgOp, HHBwCl, HHEgCl, HHFtCl, HHSplsh, Kick,
Pad10, Pad11Hd, Pad11Rm1, Pad11Rm2, HHKick
On this page, you can select two kits whose settings
are to be swapped (i.e., Kit1 and Kit2). You then
press the [F3] button (EXECUTE) to exchange their
settings.
Kit1, Kit2
Use these parameters to select the two kits whose settings are to
be swapped.
Settings: 01 to 60
From the Clear Pad page, you can initialize individ-
ual pads from the current drum kit (i.e., restore their
default settings). Use the Pad parameter to select
the pad whose settings are to be initialized, and then
press the [F3] button (EXECUTE).
Pad
Use this parameter to select the pad whose settings are to be ini-
tialized.
Settings: SnareHd, SnareOp, SnareCl, SnrHdOff, SnrOpOff,
SnrClOff, Tom1Hd, Tom1Rm1, Tom1Rm2, Tom2Hd,
Tom2Rm1, Tom2Rm2, Tom 3 H d , To m 3 R m 1 , To m 3 R m 2 ,
RideBw, RideEg, RideCp, Crash1Bw, Crash1Eg,
Crash1Cp, Crash2Bw, Crash2Eg, Crash2Cp, HHBwOp,
HHEgOp, HHBwCl, HHEgCl, HHFtCl, HHSplsh, Kick,
Pad10, Pad11Hd, Pad11Rm1, Pad11Rm2, HHKick
From the Clear Kit page, you can initialize the cur-
rent drum kit. Simply press the [F3] button (EXE-
CUTE) to do so.
KIT/JOB/EXCHANGE PAD
KIT/JOB/EXCHANGE KIT
KIT/JOB/CLEAR PAD
KIT/JOB/CLEAR KIT
DTX700 Reference Manual 33
SONG
: The current song number is reduced by 1.
: The current song number is increased by 1.
NOTE
If you hold down the [SHIFT] button and press the [F1] or [F2]
button, the song number will be reduced or increased in units
of 10.
See page 14 for details regarding cursor operations on Menu
area pages.
List of Functions
SONG/COMMON
Loop
When this parameter is set to “on”, playback of the song will start
again from the beginning whenever it finishes (i.e., looped play-
back). When set to “off”, the song will be played once to the end
and will then stop (i.e., one-shot playback).
Settings: off, on
Tempo
Use this parameter to set a tempo for playback of the selected
song.
Settings: 30 to 300
NOTE
When a song is assigned to a kit, the kit’s tempo (see page15)
will take priority over this setting.
Song Name (Name)
Use this parameter to set a name for the current song. A name of
up to 10 characters in length can be assigned.
Setting a Song Name
1. Press the dial to call up the song naming page.
2. Move the cursor within the name field using the [F1] and
[F3] buttons and select a character for that position by
turning the dial or pressing the [-/DEC] and [+/INC] but-
tons. The following characters can be used.
NOTE
If you hold down the [SHIFT] button and press the [F1]
or [F3] button, the cursor will move to the start or end of
the song name field.
If you hold down the [SHIFT] button and press the [-/
DEC] or [+/INC] button, or alternatively, hold down the
[SHIFT] button and turn the dial, the cursor will jump
between the “ , “0”, “A, “a”, and “~” characters.
Common
Loop
Tempo
Name
MIDI
Transmit
Volume
Pan
MSB
LSB
PC
VarSend(Dry)
ChoSend
RevSend
Job
Clear
ClearAll
Copy
ImprtSMF
MemInfo
For settings affecting all songs
SONG/COMMON
SONG
DTX700 Reference Manual
34
3. When you have entered the required name, press the dial
or the [EXIT] button to return to the previous page.
4. Press the [STORE] button and the dial to store your new
setting.
SONG/MIDI
: The current MIDI channel number is reduced by 1.
: The current MIDI channel number is increased by 1.
q MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number (1
to 16).
Settings: 1 to 16
Transmit
Use this parameter to specify which MIDI messages the current
song will send to the internal tone generator and external MIDI
devices on the selected MIDI channel.
Settings: off, all, PC
Volume
Use this parameter to set the MIDI volume (Control Change 7)
sent by the current song. In terms of the internal tone generator,
this value affects all voices played on the MIDI channel indicated
by q.
Settings: 0 to 127
NOTE
If “off” or “PC” has been selected for the Transmit parameter
above, this setting will be displayed as “---” and modification
will not be possible.
If you change the volume setting for MIDI channel 10, the cur-
rent kit’s Volume parameter setting from the Menu area’s Kit/
Common page will also change to this new value.
Panorama (Pan)
Use this parameter to set the stereo panning (Control Change 10)
sent by the current song on the selected MIDI channel. In terms
of the internal tone generator, this value affects all voices on that
channel.
Settings: L64 to C to R63
NOTE
If “off” or “PC” has been selected for the Transmit parameter
above, this setting will be displayed as “---” and modification
will not be possible.
q MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number.
Settings: 1 to 16
Bank Select MSB (MSB)
Use this parameter to set a Bank Select MSB value sent by the
current song on the selected MIDI channel.
Settings: 000 to 127
Bank Select LSB (LSB)
Use this parameter to set a Bank Select LSB value sent by the
current song on the selected MIDI channel.
Settings: 000 to 127
Program Change (PC)
Use this parameter to set a Program Change number sent by the
current song on the selected MIDI channel.
Settings: 000 to 128
NOTE
If “off” has been selected for the Transmit parameter above,
this setting will be displayed as “---” and modification will not
be possible.
To select a DTX700 drum kit, set parameters for MIDI channel
10 as follows. Setting a Program Change number for this MIDI
channel ensures that the kit will change immediately whenever
the song is played.
MSB = 125, LSB = 001, PC = Number of desired kit
For MIDI-related settings
SONG/MIDI 1/3
off No MIDI messages will be sent.
all All MIDI messages set here will be sent.
PC
Only Program Change messages, including Bank
Select MSB and LSB messages, will be sent.
q
SONG/MIDI 2/3
q
SONG
DTX700 Reference Manual
35
q MIDI Channel (Ch)
Use this parameter to select the current MIDI channel number.
Settings: 1 to 16
Variation Send Level (VarSend(Dry))
Use this parameter to set the variation-effect send level to be sent
by the current song on the selected MIDI channel.
Settings: 0 to 127
NOTE
If “off” or “PC” has been selected for the Transmit parameter
above (see page34), this setting will be displayed as “---” and
modification will not be possible.
This parameter cannot be set for MIDI channel 10. Accord-
ingly, it will be displayed as “---” when that channel has been
selected.
Chorus Send Level (ChoSend)
Use this parameter to set the chorus-send level to be sent by the
current song on the selected MIDI channel.
Settings: 0 to 127
NOTE
If “off” or “PC” has been selected for the Transmit parameter
above (see page34), this setting will be displayed as “---” and
modification will not be possible.
If you change the chorus send level for MIDI channel 10, the
current kit’s ChoSend (Chorus Send Level) setting (see
page26) will also change to this new value.
Reverb Send Level (RevSend)
Use this parameter to set the reverb-send level to be sent by the
current song on the selected MIDI channel.
Settings: 0 to 127
NOTE
If “off” or “PC” has been selected for the Transmit parameter
above (see page34), this setting will be displayed as “---” and
modification will not be possible.
If you change the reverb send level for MIDI channel 10, the
current kit’s Reverb Send Level (RevSend) setting (see
page27) will also change to this new value.
SONG/JOB
You can use the Clear Current Song (Clear) page to
delete all of the current User song’s data.
CAUTION
When a User song is cleared, its data is completely erased
from the DTX700s memory. Be sure, therefore, to always
save important song data on a USB memory device or the
like before clearing it.
After clearing a song, be sure to store your new settings.
From the Clear All Songs (Clear All) page, you can
delete all User songs.
CAUTION
When a User song is cleared, its data is completely erased
from the DTX700s memory. Be sure, therefore, to always
save important song data on a USB memory device or the
like before clearing it.
After clearing songs, be sure to store your new settings.
SONG/MIDI 3/3
q
For song management tasks
SONG/JOB/CLEAR
SONG/JOB/CLEAR ALL
SONG
DTX700 Reference Manual
36
You can use the Copy Song (Copy) page to copy
another song into the current User song, replacing it
completely.
Bank
Use this parameter to select the type of song to copy. “PRE
refers to the Preset songs stored as the DTX700’s default settings;
“USER” refers to the User songs that can be accessed by pressing
the [SONG] button; and “RECORDER” refers to the recording
made using the [REC] button.
Settings: USER, PRE, RECORDER
Number
Use this parameter to select the number of the song to be copied.
Settings: PRE 1 to 63, USER 1 to 93
NOTE
No value can be set for this parameter if Bank has been set to
“RECORDER”.
From the Import SMF page, you can import a stan-
dard MIDI file (SMF) into the DTX700 from a USB
memory device for use as a User song. These files
contain sequenced MIDI data and have a “.mid” file
extension. It should be noted that the DTX700 sup-
ports Format 0 SMFs only.
SONG/MEMORY INFO
To confirm the status of memory usage for song data,
navigate to the Menu area’s Song/MemInfo (Memory
Info) page.
q Memory available (KB)
This indicates the amount of unused song memory in kilobyte
(KB) units.
w Memory availability ratio (%)
This indicates how much of the total song memory is currently
unused in percentage format.
e Total memory (KB)
This indicates the total song memory in kilobyte (KB) units.
SONG/JOB/COPY
SONG/JOB/IMPORT SMF
For checking song memory status
SONG/MEMORY INFO
w eq
DTX700 Reference Manual 37
UTILITY
List of Functions
NOTE
See page 14 for details regarding cursor operations on Menu
area pages.
UTILITY/GENERAL
MasterVolume
Use this parameter to set the master volume of the DTX700’s
internal tone generator. If a small value is set here, the [MAS-
TER] dial on the front panel will have very little effect in increas-
ing the output volume.
Settings: 0 to 127
Master Tuning (MasterTune)
Use this parameter to tune the internal tone generator (i.e., adjust
its basic pitch) in units of 0.1 cents. The value in parentheses
shows the corresponding tuning (of A above middle C) in Hertz.
Settings: -102.4 to +0.0 to +102.3
NOTE
A cent is a unit of pitch defined as one hundredth of a semi-
tone. (100 cents = 1 semitone)
Panorama Depth (PanDepth)
Use this parameter to adjust the width of the DTX700’s overall
stereo-panning field, while maintaining the individual pan set-
tings for drum and musical instrument sounds.
Settings: 1 to 127
General
MasterVolume
MasterTune
PanDepth
AuxOutSel
PlayCount
AutoPowerOff
LCD Mode
MasterEQ
LowGain
LowFreq
LowQ
LowShape
MidGain
MidFreq
MidQ
HighGain
HighFreq
HighQ
HighShape
Pad
PadFunc
CC Ch
CC Val
FootClosePos
FootSplashSens
HH-KickVelSens
CymbalChokeRate
EffectSw
Variation
Chorus
Reverb
SnareBuzz
Resonance
MIDI
MIDI IN/OUT
ThruPort
LocalCtrl
MIDI Sync
ClockOut
SeqCtrl
Merge
Rcv10ch
RcvPC
RcvPC10ch
PolyAfter
SendHH
DeviceNo.
FactSet
PowerOn Auto
For settings affecting the entire system
UTILITY/GENERAL 1/3
UTILITY/GENERAL 2/3
UTILITY
DTX700 Reference Manual
38
Auxiliary Output Selection (AuxOutSel)
Use this parameter to indicate where audio input via the [AUX
IN] jack will be output.
Settings: L&R+ph, phones
PlayCount
Use this parameter to activate (on) or deactivate (off) a two-mea-
sure lead in before a song starts playing.
Settings: off, on
AutoPowerOff
Use this parameter to set the amount of time for which the
DTX700 must be idle before it will turn off automatically. In
addition to settings of 5, 10, 15, 30, 60, and 120 minutes, you can
disable this function by selecting “off”.
Settings: off, 5, 10, 15, 30, 60, 120
LCD Mode
Use this parameter to switch the screen display mode between
normal (i.e., dark letters on a bright background) and reverse (i.e.,
the opposite).
Settings: normal, reverse
UTILITY/MASTER EQ
Setting the Master Equalizer
The parameters from the Menu area’s Utility/Master
EQ page can be used to adjust the master equalizer
that shapes the tone of voices, songs, and other
audio output. In specific terms, this three-band mas-
ter equalizer allows the signal level to be freely
boosted or cut around a center frequency specified
for each of the bands. In addition, the “low” and
“high” frequency bands can be set to either shelv-
ing or peaking type equalization.
NOTE
The settings on this page will change if you adjust the master
equalizer from the Kit area (accessed by pressing the [KIT]
and [F1] buttons).
Master equalization has no effect on audio input via the [AUX
IN] jack (see page7).
L&R+ph
The auxiliary-input audio will be output via the
OUTPUT jacks ([L/MONO] and [R]) and the
[PHONES] jack.
phones
The auxiliary-input audio will be output via the
[PHONES] jack only.
UTILITY/GENERAL 3/3
For master equalizer settings
UTILITY/MASTER EQ 1/5 to 5/5
Gain
Low High
Frequency (Hz)
Q
Three EQ bands
Mid
UTILITY
DTX700 Reference Manual
39
LowGain, MidGain, and HighGain
Use these parameters to boost or cut the center-frequency levels
of the low, mid, and high frequency bands, respectively.
Settings: -12 to +0 to +12
LowFreq, MidFreq, and HighFreq
Use these parameters to set the center frequencies of the low, mid,
and high frequency bands, respectively.
Settings: LowFreq: 32Hz to 2.0kHz when LowShape is set to
“shelving”
63Hz to 2.0kHz when LowShape is set to
“peaking”
MidFreq: 100Hz to 10kHz
HighFreq: 500Hz to 16kHz
Low Resonance (LowQ), Mid Resonance (MidQ), and
High Resonance (HighQ)
Use these parameters to specify widths for the low, mid, and high
frequency bands, respectively. If you set a large value, a narrower
band of frequencies will be affected and the tone will change
markedly around the center frequency. If you set a smaller value,
a wider band of frequencies will be affected and the tone will
change gradually around the center frequency.
Settings: 0.1 to 12.0
NOTE
If the LowShape or HighShape parameter has been set to
“shelving”, the corresponding width (Q) setting will be displayed
as “---” and modification will not be possible.
LowShape and HighShape
Use these parameters to set EQ types for the low and high fre-
quency bands, respectively.
Settings: shelving, peaking
•Shelving
Signals at all frequencies either above or below the specified
frequency will be boosted or cut.
Peaking
Signals at frequencies in the vicinity of the center frequency
will be boosted or cut.
Q=0.1
Q=12.0
Frequency (Hz)
Center frequency
EQ low EQ high
Gain
Center
frequency
Gain
Center
frequency
Frequency (Hz) Frequency (Hz)
Gain
Center frequency
Frequency (Hz)
UTILITY
DTX700 Reference Manual
40
UTILITY/PAD
The parameters from the Menu area’s Utility/Pad page
can be used to assign functions to pads and foot-
switches.
PAD
Press this button to open a popup window for selecting the pad to
be set. You can also strike a pad to select it.
AUDITION
By pressing the [F3] button (AUDITION), you can play the
sound assigned to the selected pad without actually striking it.
This can prove highly useful when you need to listen to the
assigned sound while making settings.
Pad Function (PadFunc)
Use this parameter to specify a function (such as kit, song, or
tempo selection) to be performed instead of playing a sound
when the current pad is struck. Note that you can strike a pad or
select it using the [F1] button (PAD) to make it the current pad.
Settings: off, inc kitNo, dec kitNo, inc songNo, dec songNo, inc
tempo, dec tempo, tap tempo, clickOn/Off, effectOn/Off,
CC01 to CC95
Control-Change Send Channel (CC Ch)
Use this parameter to set a MIDI channel for sending the MIDI
Control Change message selected using the PadFunc (Pad Func-
tion) parameter.
Settings: 1 to 16
Control Change Value (CC Val)
Use this parameter to set a value for the MIDI Control Change
message selected using the PadFunc (Pad Function) parameter.
Settings: 0 to 127
Foot Closed Position (FootClosePos)
Use this parameter to adjust the position at which the hi-hat
switches from open to closed when the hi-hat controller is oper-
ated. The lower the value, the smaller the virtual opening between
the top and bottom hi-hats.
Settings: -32 to +0 to +32
Splash Sensitivity (FootSplashSens)
Use this parameter to set the degree of sensitivity for detecting hi-
hat foot splashes. The higher the value, the easier it will be to pro-
duce a foot-splash sound with a hi-hat controller. High values
may, however, result in splash sounds being unintentionally pro-
duced when, for example, you depress the hi-hat controller lightly
as you keep time. It is a good idea to set this parameter to “off” if
you do not want to play foot splashes.
Settings: off, 1 to 127
HH-Kick Velocity Sensitivity (HH-KickVelSens)
Use this parameter to set the sensitivity of the DTX700 to opera-
tion of the foot controller connected via the [!2 HH-KICK] trig-
ger input jack. The larger the setting, the louder the sound
produced when the controller is lightly depressed.
Settings: 0 to 127
CymbalChokeRate
Use this parameter to specify how quickly the cymbal sound is to
decay when the choking or muting technique is used. The larger
the value, the faster the sound will decay.
Settings: -20 to +0 to +20
For pad-related settings
UTILITY/PAD 1/2
off Sounds will be produced in the normal way.
inc kitNo The kit number will be increased by 1.
dec kitNo The kit number will be decreased by 1.
inc songNo The song number will be increased by 1.
dec songNo The song number will be decreased by 1.
inc tempo The tempo will be increased by 1 bpm.
dec tempo The tempo will be decreased by 1 bpm.
tap tempo
The pad or footswitch can be used to tap the
tempo.
clickOn/Off The click track will be toggled on or off.
effectOn/Off The effects will be toggled on or off.
CC01 to CC95
A MIDI Control Change message of the corre-
sponding number will be sent to the DTX700’s
internal tone generator and connected MIDI
devices.
UTILITY/PAD 2/2
UTILITY
DTX700 Reference Manual
41
UTILITY/EFFECT SW
When the parameters from the Utility/Effect Switch page are set
to “enable”, the corresponding effects will be toggled on and off
in response to simultaneous pressing of the [SHIFT] and [F2] but-
tons in the Kit area (accessed by pressing the
[KIT] button). If set to “disable”, meanwhile, this key combina-
tion will have no effect on the status of the corresponding effects.
Variation : Variation effect (see page27)
Chorus : Chorus effect (see page27)
Reverb : Reverb effect (see page27)
SnareBuzz : Snare buzz effect (see page30)
Resonance : Resonance effect (see page31)
Settings: disable, enable
UTILITY/MIDI
MIDI IN/OUT
Use this parameter to specify whether the exchange of MIDI mes-
sages with external devices is to be performed via the MIDI con-
nectors or the [USB TO HOST] port.
Settings: MIDI, USB
MIDI Thru Port (ThruPort)
When the DTX700 receives MIDI messages from a computer
connected via USB, it can relay messages received via a specific
port to the [MIDI OUT] connector so that they can be output to
other external MIDI devices. Use this parameter to specify that
port.
Settings: 1, 2
Local Control (LocalCtrl)
Use this parameter to enable (“on”) or disable (“off”) playing of
the internal tone generator using pads and songs. Normally, this is
set to “on”, meaning that the tone generator is locally controlled.
If set to “off”, the pads and external controllers are essentially
disconnected from the internal tone generator – in other words,
no sound is produced by the DTX700 when you strike them. Irre-
spective of this parameter’s setting, DTX700 performance data is
output via the [MIDI OUT] connector and MIDI data from other
devices is accepted for processing via the [MIDI IN] connector.
An “off” setting can prove highly useful when you wish to record
your drum performances as MIDI data on a hardware sequencer
or DAW software.
Settings: off, on
MIDI Synchronization (MIDI Sync)
Use this parameter to specify whether songs and the click track
are to play at the tempo set for the DTX700 or are to be synchro-
nized with external MIDI devices based on MIDI Clock messages
(i.e., F8 Timing Clock) received from them.
Settings: int, ext, auto
NOTE
In order to successfully synchronize the DTX700 whenever
this parameter is set to “ext” or “auto, the connected external
MIDI device or computer must be configured to send MIDI
Clock messages.
ClockOut
Use this parameter to enable (“on”) or disable (“off”) the sending
of MIDI Clock messages (i.e., F8 Timing Clock) via the [MIDI
OUT] connector.
Settings: off, on
For enabling and disabling effects
UTILITY/EFFECT SW
For MIDI-related settings
UTILITY/MIDI 1/3
int
Songs and the click track will play at the current
DTX700 tempo setting. Use “int” when the drum
trigger module is to be used alone or as the mas-
ter clock source for other equipment.
ext
The DTX700 will be synchronized with MIDI Clock
messages received via MIDI. Use “ext” when an
external MIDI device is to be used as the master
clock source for synchronized playback.
auto
MIDI Clock messages received via MIDI will be
prioritized over the DTX700’s current tempo. In
other words, playback will be synchronized to
MIDI Clock messages whenever they are
received, and the internal tempo will be used in all
other cases.
UTILITY
DTX700 Reference Manual
42
Sequencer Control (SeqCtrl)
Use this parameter to specify whether or not System Realtime
messages (i.e., FA Start, FB Continue, and FC Stop) will be sent
and received via MIDI.
Settings: off, in, out, in/out
NOTE
If “start”, “continue, or “stop” has been set for the MessageType
parameter from the Menu area’s Kit/MIDI/Assign page, the
SeqCtrl (Sequencer Control) setting will have no effect and the
corresponding message (i.e., FA Start, FB Continue, or FC
Stop) will be output.
MIDI Merge (Merge)
The MIDI Merge function allows you to mix MIDI messages
received via the [MIDI IN] connector with performance data pro-
duced by playing the DTX700, and to output this mixed MIDI
data via the [MIDI OUT] connector. Set this parameter to “on” to
enable the merging of MIDI messages in this way.
Settings: off, on
Channel 10 Receive (Rcv10ch)
Use this parameter to enable (“on”) or disable (“off”) the receipt
of MIDI messages sent by external devices on Channel 10. If set
to “off”, the internal tone generator will play voices on Channel
10 in response only to input from pads connected to the DTX700.
Settings: off, on
Program Change Receive (RcvPC)
Use this parameter to enable (“on”) or disable (“off”) the receipt
of MIDI Program Change messages. If set to “off”, voices will be
changed based only on drum-kit voice settings when a new kit is
selected. If you want voices on all MIDI channels to change in
line with song settings and in response to signals from external
MIDI devices, this parameter should be set to “on”.
Settings: off, on
Channel-10 Program Change Receive (RcvPC10ch)
Use this parameter to enable (“on”) or disable (“off”) the receipt
of MIDI Program Change messages sent on MIDI channel 10. If
you want kits to change in line with song settings or in response
to signals from external MIDI devices, this parameter should be
set to “on”. Note that this setting takes effect only when “on” is
also selected for the RcvPC (Program Change Receive) parame-
ter (on this page).
Settings: off, on
Polyphonic Aftertouch (PolyAfter)
Use this parameter to enable (“on”) or disable (“off”) the
exchange of polyphonic aftertouch with external MIDI devices.
Settings: off, on
Send Hi-hat Controller (SendHH)
Use this parameter to enable (“on”) or disable (“off”) the sending
of MIDI messages corresponding to continuous motion of a hi-
hat controller between the open and closed positions.
Settings: off, on
NOTE
If “hi-hat” is selected for the HH Func (Hi-hat Function) param-
eter from the Menu area’s Kit/Pad page, MIDI messages will
be sent only when this parameter is set to “on.
If “MIDI” is selected for the HH Func (Hi-hat Function) parame-
ter from the Menu area’s Kit/Pad page, MIDI messages will
always be sent, regardless of whether this parameter is set to
“on” or “off.
UTILITY/MIDI 2/3
off
System Realtime messages are neither sent nor
received.
in
System Realtime messages are received but not
sent.
out
System Realtime messages are sent but not
received.
in/out
System Realtime messages are sent and
received.
UTILITY/MIDI 3/3
UTILITY
DTX700 Reference Manual
43
Device Number (DeviceNo.)
Use this parameter to set a MIDI device number for the DTX700.
In order to successfully exchange bulk data, parameter changes,
and other system exclusive MIDI messages, this setting must
match the Device Number of the external MIDI device.
Settings: 1 to 16, all, off
UTILITY/FACTORY SET
From the Factory Set page, you can restore all of the
DTX700’s user data (i.e., all User kits, User trigger
setups, User songs, waves, and utility settings) to
their default conditions.
PowerOn Auto
If you select the “PowerOn Auto” checkbox, the Factory Set (i.e.,
default settings) will be restored each time you turn on your
DTX700.
Restoring Defaults
1. Press the [F3] button (EXECUTE).
You will be asked to confirm that you wish to restore the
Factory Set.
2. To proceed, press the dial.
Alternatively, you can press the [EXIT] button to cancel
the process.
The following message is displayed during the restoration
process.
CAUTION
Whenever the instrument is reset in this way, any settings
you have made will be overwritten with the corresponding
defaults. All important user-defined data should, there-
fore, be saved on a USB memory device (see page57) in
advance.
all
System exclusive messages for all MIDI device
numbers will be received. In addition, the DTX700
will transmit messages using Device Number 1.
off
System exclusive messages such as bulk dump
and parameter changes will be neither transmitted
nor received. An error message will be displayed
if an attempt is made to perform such an opera-
tion.
For restoring default settings
UTILITY/FACTORY SET
DTX700 Reference Manual 44
TRIGGER
This section provides a description of the Menu
area’s Trigger pages. The characteristics of the trig-
ger signals output from pads when they are played
depend on a range of different pad design factors.
The Trigger pages allow you to optimize each pad’s
trigger signals for processing by the DTX700 and to
save your settings as trigger setup data.
: The current trigger setup number is reduced by 1.
: The current trigger setup number is increased by 1.
NOTE
If you hold down the [SHIFT] button and press the [F1] or [F2]
button, the current trigger setup number will be reduced or
increased in units of 10.
See page 14 for details regarding cursor operations on Menu
area pages.
List of Functions
TRIGGER/NAME
Trigger Setup Name (Name)
From the Trigger Setup Name (Name) page, you can assign a
name of up to 12 characters in length to the current trigger setup.
Move the cursor within the name field using the [F1] and [F3]
buttons and select a character for that position by turning the dial
or pressing the [-/DEC] and [+/INC] buttons. The following char-
acters can be used.
NOTE
If you hold down the [SHIFT] button and press the [F1] or [F3]
button, the cursor will move to the start or end of the trigger
setup name field.
If you hold down the [SHIFT] button and press the [-/DEC] or
[+/INC] button, or alternatively, hold down the [SHIFT] button
and turn the dial, the cursor will jump between the “ , “0”, “A,
“a”, and “~” characters.
Name
Name
Pad
Curve
VelCurve
PadType
PadType
Gain
RejectTime
MinLevel
MaxLevel
MinVelocity
MaxVelocity
WaitTime
Head/Bow
OpenEdgeOffset
CloseCupOffset
Sensitivity
Head/Bow
OpenEdge
CloseCup
NoiseFltrTbl
CrssTalk
Job
CopyPad
CopyTrg
For naming trigger setups
TRIGGER/NAME
TRIGGER
DTX700 Reference Manual
45
TRIGGER/PAD
: A popup window appears so that a pad can be selected
for editing. The current pad is indicated at the top of the
display (i.e., “Snare” in this case).
: The sound assigned to the current pad is played.
Velocity Curve (VelCurve)
Use this parameter to select a velocity curve for the current pad.
A velocity curve determines how the relative strength of playing
affects the signal produced. For example, with the “loud2” veloc-
ity curve shown below, relatively loud sounds (i.e., high veloci-
ties) can be produced even with softer playing. In contrast, the
“hard2” curve only produces loud sounds when the pad in ques-
tion is struck quite hard.
Settings: loud2, loud1, normal, hard1, hard2
For pad-related trigger settings
TRIGGER/PAD
TRIGGER/PAD/CURVE
loud2 loud1 normal hard1 hard2
Trigger input level (i.e., strength of playing) m
Velocity m
TRIGGER
DTX700 Reference Manual
46
PadType
Use this parameter to specify a type for the current pad.
Settings: KP125W/125, KP65, XP120/100 Snare, XP120/100
Tom, XP80 Snare, XP80 Tom, XP70 Snare, XP70 Tom,
XP120/100/80 Snare, XP80/70 Tom, TP120/100 Snare,
TP120/100 Tom, TP65S Snare, TP65S Tom, TP65S
HiHat, TP65, PCY155, PCY135, PCY150S, PCY130SC,
PCY130S/130, PCY100, PCY100 HiHat, PCY65S/65,
PCY155/135, RHH135, RHH130, DT Snare, DT HiTom,
DT LoTom, DT Kick, TRG Snare, TRG HiTom, TRG
LoTom, TRG Kick
Gain
Use this parameter to set the level of gain (or amplification) that
is applied to the input signal from the selected pad before it is
converted into a trigger signal. With a high setting, all input sig-
nals above a certain level will be amplified to the same level (i.e.,
the maximum level). This means that variation in the softness or
hardness with which the pad is struck can be smoothed out.
Meanwhile, when a low setting is used, the softness or hardness
of playing will be reflected to a much greater degree in the output
trigger signal, allowing for more expressive performances.
Settings: 1 to 64
RejectTime
Use this parameter to specify the time period after a pad is struck
during which a second input signal will be ignored. The larger the
value set here, the longer the period during which a second sound
will not be produced.
Settings: 4ms to 500ms
NOTE
In the following special case, a second sound will be produced
during the reject time.
The struck pad has a type (as set on this, the Menu area’s
Trigger/Pad/Pad Type page) that does not start with “DT”,
and in addition, the trigger level of the second strike within
the reject time is at least twice as strong as that of the first.
TRIGGER/PAD/PAD TYPE 1/6
Tip: Pad types
In order to ensure that you get the best sound from each and
every pad, we have prepared a full range of optimized trigger
parameters (i.e., various values related to pad input signals and
the like), and named them accordingly. These groupings of
parameters are referred to as “pad types”. Given that pads come
in many different varieties, such as snares, toms, cymbals, and
kick drums, it follows that pad characteristics vary widely. The
DTX700 comes preloaded with pad types for each different set
of characteristics, allowing you to use them to their maximum
potential.
TRIGGER/PAD/PAD TYPE 2/6
TRIGGER
DTX700 Reference Manual
47
Minimum Level (MinLevel)
Maximum Level (MaxLevel)
Use these parameters to set the range of input signals (in percent-
age format) that will be converted into trigger signals. Any input
signals at the minimum level or lower will not be converted into a
trigger signal, and therefore, will not produce any sound. Mean-
while, input signals at the maximum level or higher will result in
trigger signals with the Maximum velocity (see below).
Settings: 0% to 99% for Minimum Level
1% to 100% for Maximum Level
Minimum Velocity (MinVelocity)
Maximum Velocity (MaxVelocity)
Use these parameters to specify the maximum and minimum
velocities corresponding to the Maximum Level and Minimum
Level (see above). When struck, the current pad will produce
sounds within these two velocities.
Settings: 0 to 126 for Minimum Velocity
1 to 127 for Maximum Velocity
WaitTime
These parameters are used to set the time until the current pad
detects a trigger signal. In specific terms, they define how long it
takes for detection of the peak trigger signal in order that the
strength of playing can be accurately reflected in the sound gen-
erated. In the case of two-zone and three-zone pads, each zone
has a different setting.
Head/Bow
This parameter sets the detection time for the pad’s head (or bow,
in the case of cymbal pads).
Settings: 1 to 64
OpenEdgeOffset
This parameter sets the detection time for the pad’s open rim (or
edge, in the case of cymbal pads).
Settings: 0 to 64
TRIGGER/PAD/PAD TYPE 3/6
IMPORTANT
In normal circumstances, there is no need to modify any of
the following three sets of parameters – WaitTime, Sensitivity
and NoiseFilterTbl (Noise Filter Table). Please bear in mind
that setting these parameters to a value not appropriate for
the pad in question can lead to unpredictable results when
you play it.
TRIGGER/PAD/PAD TYPE 4/6
TRIGGER
DTX700 Reference Manual
48
Closed Cup Offset (CloseCupOffset)
This parameter sets the detection time for the pad’s closed rim (or
cup, in the case of cymbal pads).
Settings: 0 to 64
The following diagrams show how these zones apply
to snare and tom pads (left) and cymbal pads (right).
NOTE
Larger values correspond to a longer delay before sound out-
put and vice-versa. If you must make an adjustment, try to do
so in a way that does not hinder your performances.
Sensitivity
These parameters are used to set the sensitivity of the pad. In the
case of two-zone and three-zone pads, each zone has a different
setting.
Head/Bow
This parameter sets the sensitivity for the pad’s head (or bow, in
the case of cymbal pads).
Settings: 1.0 to 2.0, XP120/100, XP80, XP70, XP-A, XP-B, XP-C,
XP-OpR, TP-ClR
OpenEdge
This parameter sets the sensitivity for the pad’s open rim (or
edge, in the case of cymbal pads).
Settings: 1.0 to 2.0, XP120/100, XP80, XP70, XP-A, XP-B, XP-C,
XP-OpR, TP-ClR
Closed Cup (CloseCup)
This parameter sets the sensitivity for the pad’s closed rim (or
cup, in the case of cymbal pads).
Settings: 1.0 to 2.0, XP120/100, XP80, XP70, XP-A, XP-B, XP-C,
XP-OpR, TP-ClR
Noise Filter Table (NoiseFltrTbl)
This parameter is used as a countermeasure in situations where,
for whatever reason, noise enters the trigger signals output when
the pad is struck or other instability in trigger signals leads to
sounds not being generated correctly.
Settings: 1 to 10
NOTE
Larger values can, in cases where the pad is struck multiple
times in rapid succession, result in sounds being dropped. If
you must make an adjustment, try to do so in a way that does
not hinder your performances.
The term “crosstalk” refers to the output of trigger
signals from a pad other than the one that was stuck
as a result of vibration or interference between
pads. From the Menu area’s Trigger/Pad/Crosstalk
page, you can set input levels below which trigger
signals will not be produced, thus preventing cross-
talk.
q RejectLevel (From All)
Use this parameter to specify a level for preventing crosstalk from
the DTX700’s other pads. If the input level produced at the cur-
rent pad is lower than this level whenever any of the other pads
are struck, that input will be treated as crosstalk and no sound will
be produced. Although higher settings are more effective in pre-
venting crosstalk, they can also make it difficult to play multiple
pads at the same time.
Settings: 0% to 99%
TRIGGER/PAD/PAD TYPE 5/6
Closed rim zone
Cup zone
Open rim zone Head zone Edge zone Bow zone
TRIGGER/PAD/PAD TYPE 6/6
TRIGGER/PAD/CROSS TALK
q
w
e
TRIGGER
DTX700 Reference Manual
49
w RejectLevel
Use this parameter to specify a level for preventing crosstalk from
the pad(s) indicated by e. If the input level produced at current
pad (selected using [F1]) is lower than this level whenever the
pad(s) indicated by e are struck, it will be treated as crosstalk
and no trigger signal will be generated. Although higher settings
are more effective in preventing crosstalk, they can also make it
difficult to play multiple pads at the same time.
Settings: 0% to 99%
e From
Use this parameter to specify a pad or group of pads causing
crosstalk in the current pad. You can also strike a pad to select it.
Settings: Snare, Tom1, Tom2, Tom3, Ride, Crash1, Crash2,
HiHat, Kick, Pad10, Pad11
NOTE
When more than one pad is selected for the From parameter,
the name of the first one is indicated, followed by a “+” symbol.
Setting Procedure
1. Select the pad to be set (i.e., the current pad) either by
striking it or by pressing the [F1] button (PAD) to open a
popup window and making a selection by turning the dial.
2. Turn the dial to move the cursor to the row shown below
and press the dial.
The following popup window will appear.
: All selections are cleared.
: All pads are selected.
q indicates the name of the trigger input jack for the
selected checkbox.
w indicates the number of the trigger input jack.
3. Using the dial, move the cursor to the trigger input jack of
any pad causing crosstalk in the current pad. Press the dial
to select that pad. You can press again to deselect the pad.
4. Press the [EXIT] button to return to the previous page.
q
w
TRIGGER
DTX700 Reference Manual
50
TRIGGER/JOB
From the Copy Pad page, you can copy data from
the current trigger setup on an individual pad basis.
Use Pad1 and Pad2 to select the pads, and then
press the [F3] button (EXECUTE) to copy the set-
tings.
Pad1
Use this parameter to set the pad whose settings are to be copied.
You can also strike a pad to select it.
Pad2
Use this parameter to set the pad whose settings are to be
replaced. You can also strike a pad to select it.
Settings: Snare, Tom1, Tom2, Tom3, Ride, Crash1, Crash2,
HiHat, Kick, Pad10, Pad11
From the Copy Trigger page, you can copy data into
the current trigger setup. Use Bank and Number to
select the trigger setup whose settings are to be
copied, and then press the [F3] button (EXECUTE) to
copy the data.
Bank
Use this parameter to indicate the bank containing the trigger
setup whose data is to be copied. “PRE” refers to the trigger set-
ups stored as the DTX700’s default settings, and “USER” refers
to the trigger setups that can be accessed by pressing the [KIT]
button followed by the [F2] button (TRIGGER) to open the Trig-
ger Setup page.
Settings: PRE, USER
Number
Use this parameter to specify the number of the trigger setup
whose settings are to be copied.
Settings: 01 to 09 when Bank is set to “PRE”
01 to 20 when Bank is set to “USER”
For trigger management tasks
TRIGGER/JOB/COPY PAD
TRIGGER/JOB/COPY TRIGGER
DTX700 Reference Manual 51
CLICK
List of Functions
NOTE
See page 14 for details regarding cursor operations on Menu
area pages.
CLICK
Click Voice (Voice)
Use this parameter to select from a range of different sounds for
use with the click track.
Settings: Metronome1, Metronome2, Cowbell, Stick, Human
Click-track Output Selection (OutputSel)
Use this parameter to specify where the click track will be output
when activated. In a live-performance setting, for example, you
would normally want the click track to be output to headphones
only, and in such a case, “phones” should be selected here.
Settings: L&R+ph, phones
Click-track MIDI In (MIDI In)
Use this parameter to specify whether or not click-track sounds
are to be produced based on MIDI Note On messages received
via the [MIDI IN] connector. When set to “on”, the DTX700
operates as follows.
A click-track accent sound will be produced upon the receipt
of a MIDI note with the note number set by the MIDI Note-
Acc (MIDI Accent Number) parameter (also from the Menu
area’s Click page).
A click-track quarter note sound will be produced upon the
receipt of a MIDI note with the note number set by the MIDI
Noteq (MIDI Quarter-note Number) parameter (also from
the Menu area’s Click page).
Settings: off, on
Click-track MIDI Out (MIDI Out)
Use this parameter to turn the output of click-track MIDI events
(i.e., MIDI Note On messages) on and off. When set to “on”, the
DTX700 operates as follows.
A MIDI note with the note number set by the MIDI NoteAcc
(MIDI Accent Number) parameter (also from the Menu
area’s Click page) will be produced for each click-track
accent sound.
A MIDI note with the note number set by the MIDI Noteq
(MIDI Quarter-note Number) parameter (also from the
Menu area’s Click page) will be produced for each click-
track quarter note sound.
Settings: off, on
NOTE
Regardless of this parameter’s setting, no MIDI Note On mes-
sages will be produced for click-track sounds other than
accents and quarter notes.
For click-track settings
CLICK 1/2
L&R+ph
The click track will be output via the OUTPUT
jacks ([L/MONO] and [R]) and the [PHONES] jack.
phones
The click track will be output via the [PHONES]
jack only.
Voice
OutputSel
MIDI In
MIDI Out
MIDI NoteAcc
MIDI Noteq
CLICK 2/2
CLICK
DTX700 Reference Manual
52
MIDI Accent Number (MIDI NoteAcc)
Use this parameter to assign a MIDI note number to click-track
accent sounds.
Settings: off, C#-2 to F#8
If the MIDI In (Click-track MIDI In) parameter (also from the
Menu area’s Click page) is set to “on”, a click-track accent sound
will be produced each time a MIDI note with the note number set
here is received.
NOTE
If this parameter is set to “off, no click-track accent sounds will
be produced in response to received MIDI notes.
If the same value is set for this parameter and the MIDI Noteq
(MIDI Quarter-note Number) parameter (also from the Menu
area’s Click page), the same sound will be produced for all
beat timings.
If the MIDI Out (Click-track MIDI Out) parameter (also from the
Menu area’s Click page) is set to “on”, a MIDI Note On message
with the note number set here will be produced for each click-
track accent sound.
NOTE
If this parameter and the MIDI Noteq (MIDI Quarter-note Num-
ber) parameter (also from the Menu area’s Click page) are
both set to “off”, no MIDI Note On messages will be output for
click-track sounds. If, however, this parameter is set to “off” but
the MIDI Noteq (MIDI Quarter-note Number) parameter is set
to a value other than “off, MIDI Note On messages with the
corresponding note number will be output for all click-track
sounds.
MIDI Quarter-note Number (MIDI Noteq)
Use this parameter to assign a MIDI note number to click-track
quarter note sounds.
Settings: off, C#-2 to F#8
If the MIDI In (Click-track MIDI In) parameter (also from the
Menu area’s Click page) is set to “on”, a click-track quarter-note
sound will be produced each time a MIDI Note On message with
the note number set here is received.
NOTE
If this parameter is set to “off, no click-track quarter-note
sounds will be produced in response to received MIDI notes.
If the MIDI Out (Click-track MIDI Out) parameter (also from the
Menu area’s Click page) is set to “on”, a MIDI Note On message
with the note number set here will be produced for each click-
track quarter-note sound.
NOTE
If this parameter is set to “off, no MIDI Note On messages will
be produced for click-track quarter-note sounds.
DTX700 Reference Manual 53
WAVE
: The current wave number is reduced by 1.
: The current wave number is increased by 1.
: The current wave is played while the button is held
down.
NOTE
If you hold down the [SHIFT] button and press the [F1] or [F2]
button, the current wave number will be reduced or increased
in units of 10.
See page 14 for details regarding cursor operations on Menu
area pages.
List of Functions
WAVE/COMMON
PlayMode
Use this parameter to set the way in which the selected wave will
be played when assigned to a pad. For details on editing start,
end, and loop points, see the descriptions of this page’s Start,
End, and Loop parameters.
oneshot: The wave will be played once only from the start
point to the end point. This mode is normally
selected for drums, special effects, and other non-
looped sounds.
loop: The wave will be played continuously, first from
the start point to the end point, and then repeatedly
from the loop point to the end point.
Settings: oneshot, loop
Common
PlayMode
Start
Loop
End
Decay
HHCtrlSens
Name
Job
Import
Wave
PadAssign
ImportAll
Normalize
Delete
DeleteAll
Optimize
MemInfo
For settings affecting all waves
WAVE/COMMON 1/3
One-shot playback
Looped playback
Start point End point
End pointStart point Loop point
WAVE
DTX700 Reference Manual
54
Wave Trimming
Start
This is the position at which playback will start. In other words,
no data in front of this point (i.e., with a smaller position value)
will be played.
Settings: 00000 and higher
Loop
This is the position at which looping will start. If “loop” has been
selected for the PlayMode parameter (also from the Menu area’s
Wave/Common page), playback will loop continuously between
this point and the end point.
Settings: 00000 and higher
End
This is the position at which playback or looping will end. In
other words, no data behind this point (i.e., with a larger position
value) will be played.
Settings: 00001 and higher
Decay
Use this parameter to set the rate at which the playback volume of
the wave decays. At a setting of 127, the volume remains con-
stant. Lower values produce a faster rate of decay. This setting
applies to both one-shot and looped playback modes.
Settings: 0 to 127
Hi-hat Control Sensitivity (HHCtrlSens)
Use this parameter to specify how the playback volume of the
wave decays in response to operation of a hi-hat controller con-
nected to the [HI-HAT CONTROL] jack. The smaller the value,
the faster the rate of decay.
Settings: -64 to +0 to +64
Wave Name (Name)
Use this parameter to set a wave name of up to 10 characters in
length. Move the cursor within the name field using the [F1] and
[F3] buttons and select a character for that position by turning the
dial. The following characters can be used.
NOTE
If you hold down the [SHIFT] button and press the [F1] or [F3]
button, the cursor will move to the start or end of the wave
name field.
If you hold down the [SHIFT] button and press the [-/DEC] or
[+/INC] button, or alternatively, hold down the [SHIFT] button
and turn the dial, the cursor will jump between the “ , “0”, “A,
“a”, and “~” characters.
WAVE/COMMON 2/3
WAVE/COMMON 3/3
WAVE
DTX700 Reference Manual
55
WAVE/JOB
From the Job page, you can create waves by import-
ing WAV or AIFF files from a USB memory device
into the DTX700’s internal memory and delete previ-
ously imported waves among other tasks.
Whenever you press the [F3] button (EXECUTE) on any of the
pages accessed via the Wave/Job page, a confirmation panel will
be displayed. If you decide to proceed with the corresponding
operation, the content of the DTX700’s internal memory will be
permanently affected.
Using the Import page, you can import a WAV or
AIFF file from a USB memory device’s root directory
into the DTX700’s internal memory.
Wave
Use this parameter to select a wave file from the USB memory
device to be imported into the DTX700.
PadAssign
Use this parameter to assign the selected wave to a trigger input
source once imported. If “off” is selected, no assignment will be
made.
Settings: off, SnareHd, SnareOp, SnareCl, SnrHdOff, SnrOpOff,
Snr C l O ff, To m 1 H d , To m 1 R m 1 , To m 1 R m 2 , To m 2 H d ,
Tom2Rm1, Tom2Rm2, Tom3Hd, Tom3Rm1, Tom3Rm2,
RideBw, RideEg, RideCp, Crash1Bw, Crash1Eg,
Crash1Cp, Crash2Bw, Crash2Eg, Crash2Cp, HHBwOp,
HHEgOp, HHBwCl, HHEgCl, HHFtCl, HHSplsh, Kick,
Pad10, Pad11Hd, Pad11Rm1, Pad11Rm2, HHKick
Using the Import All page, you can import all WAV
and AIFF files from a USB memory device’s root
directory into the DTX700’s internal memory.
From the Normalize page, you can increase the vol-
ume of the currently selected wave.
Ratio
Use this parameter to specify how much the wave’s volume is to
be increased. Generally, a ratio of 100% or lower is used. With a
setting of 100%, the volume will be increased to the maximum
possible level without clipping. (Ratios greater than 100% can be
specified; however, the wave may become distorted as a result.)
Settings: 1 to 800
From the Delete page, you can delete the wave cur-
rently selected on the Wave/Job page.
For wave management tasks
WAVE/JOB
WAVE/JOB/IMPORT
WAVE/JOB/IMPORT ALL
WAVE/JOB/NORMALIZE
WAVE/JOB/DELETE
WAVE
DTX700 Reference Manual
56
From the Delete All page, you can delete all waves
from the DTX700’s internal wave memory.
From the Optimize Memory page, you can maximize
the amount of unused wave memory. In order to do
this, the content of the DTX700’s internal wave mem-
ory is rearranged in order to make more memory
available. Optimization can be an effective way to
increase the amount of memory available for waves.
WAVE/MEMORY INFO
To confirm the status of memory usage for wave data,
navigate to the Menu area’s Wave/MemInfo (Memory
Info) page.
q Memory available (MB)
This indicates the amount of unused wave memory in megabyte
(MB) units.
w Memory availability ratio (%)
This indicates how much of the total wave memory is currently
unused in percentage format.
e Total memory (MB)
This indicates the total wave memory in megabyte (MB) units.
WAVE/JOB/DELETE ALL
WAVE/JOB/OPTIMIZE
For checking internal memory status
WAVE/MEMORY INFO
w eq
DTX700 Reference Manual 57
FILE
A number of terms will be used in the following
descriptions of file management functions and opera-
tions from the Menu area’s File pages. Please take a
moment to familiarize yourself with their meanings in
order that these functions and operations can be
more easily understood.
File
The term “file” is used to define a collection of data stored on a
USB memory device. The exchange of data between the
DTX700 and USB memory devices is carried out in the form of
files.
File name
As with your computer, the DTX700 can assign names to indi-
vidual files. These names are used to tell files apart, and for this
reason, no two files within a specific directory can share the
same file name. Although computers can handle very long file
names, even including non-English characters, the DTX700
requires that names be limited to alphanumeric characters.
File extension
The three letters following the period at the end of a file name –
such as “.mid” and “.wav” – are referred to as a “file exten-
sion”. The type of data contained within the file is identified by
the file extension. Please note that, although the DTX700
assigns file extensions to file names, they are not displayed on-
screen in order to make more efficient use of space.
File size
The amount of memory needed to store a file is indicated by
the file size. These sizes and also the capacities of memory
devices are presented in standard computer format using B
(bytes), KB (kilobytes), MB (megabytes), and GB (gigabytes).
(1 KB is equivalent to 1,024 bytes, 1 MB is equivalent to 1,024
KB, and 1 GB is equivalent to 1,024 MB.)
USB memory device
The term “USB memory device” is used to refer to flash mem-
ory and other USB memory units used for the storage and
retrieval of files.
Directory
A hierarchical directory system is used on memory devices in
order to group files together according to type or application.
In this regard, a “directory” is equivalent to a folder as used on
a computer. As with files, you can assign names to individual
directories. DTX700 file operations are carried out inside a set
of special directories created within a USB memory device
when it is formatted from the Menu areas File/Format page.
Please note that the DTX700 does not display this directory
structure on-screen.
Format
The operation of initializing a USB memory device is referred
to as “formatting”. Whenever you format a USB memory
device using the DTX700, any previously created files and
directories (or folders) will be erased and special directories for
file operations will be created.
Save, load
The term “save” refers to the writing of data created on the
DTX700 to a USB memory device for storage, while “load”
refers to the reading of files from the memory device into the
instrument’s internal memory.
List of Functions
NOTE
See page 14 for details regarding cursor operations on Menu
area pages.
Carry out the following steps to save a file on a USB
memory device.
Procedure
1. Plug a USB memory device that has been formatted on the
DTX700 (see page62) into the [USB TO DEVICE] port
on the side panel.
2. Navigate to the Menu area’s File/Save page.
The page will appear as follows.
\YAMAHA
DTX700 ALL : All
ALLKIT : All kit
ALLSNG : All song
ALLTRG : All trigger
ALLWAV : All wave
UTL : Utility
FILE/SAVE
Save
Load
Rename
Delete
Format
MemInfo
FILE
DTX700 Reference Manual
58
3. Select the file type.
Move the cursor to the Type row, press the dial, and select
the type of file you wish to save.
Settings: All, AllKit, AllWave, AllSong, AllTrigger, Utility
NOTE
If you select “AllWave” despite wave data having not yet
being created, a “No Wave Data” error message will be
displayed and no data will be saved.
4. Enter a name for the file to be saved.
Move the cursor to the Name row and press the dial to call
up the file naming page.
Entering file names
4-1 Move the cursor within the name field using the [F1]
and [F3] buttons and select a character for that posi-
tion by turning the dial or pressing the [-/DEC] and
[+/INC] buttons. A name of up to 8 characters in
length can be assigned to files. The following charac-
ters can be used.
NOTE
If you hold down the [SHIFT] button and press the
[F1] or [F3] button, the cursor will move to the start
or end of the file name field.
If you hold down the [SHIFT] button and press the
[-/DEC] or [+/INC] button, or alternatively, hold
down the [SHIFT] button and turn the dial, the cur-
sor will jump between the “ , “0”, “A, and “~” char-
acters.
4-2 When you have entered the required name, press the
dial or the [EXIT] button to return to the previous
page.
NOTE
Any space characters included in file names will
be automatically replaced with “_” (i.e., an under-
score).
5. Press the [F3] button (EXECUTE).
You will be asked to confirm that the file is to be saved.
Press the dial to proceed. Alternatively, you can press the
[EXIT] button to return to Step 2 above without saving.
If a file of the same name already exists, you will be asked
to confirm whether it is to be overwritten as shown below.
If you wish to set a different file name to avoid overwrit-
ing, press the [EXIT] button to return to the page from
Step 2 above.
6. Press the dial to save the file.
The following message will be displayed as the data is
being saved. If you press the [EXIT] button at this time,
the save process will be aborted and you will be returned
to the page from Step 2 above.
CAUTION
Do not unplug the USB memory device from the
[USB TO DEVICE] port or turn off either the mem-
ory device or the DTX700 while data is being saved.
Failure to observe this precaution can lead to the
memory device or the DTX700 being permanently
damaged.
When the data has been saved, you will be returned to the
page from Step 2 above.
All
All User data – i.e., all kits, waves, songs,
and triggers in addition to utility data
AllKit All kit data
AllWave All wave data
AllSong All song data
AllTrigger All trigger data
Utility Utility data
FILE
DTX700 Reference Manual
59
Carry out the following steps to load a file saved on
a USB memory device into the DTX700.
Procedure
1. Plug the USB memory device containing the saved file
into the [USB TO DEVICE] port on the side panel.
2. Navigate to the Menu area’s File/Load page.
The page will appear as follows.
3. Select the file type.
Move the cursor to the Type row, press the dial, and select
the type of file you wish to load.
The supported types are as follows.
Settings: All, AllKit, Kit, AllWave, Wave, AllSong, Song, All-
Trigger, Trigger, Utility
4. Select the file you wish to load.
Move the cursor to the File row, and then select the file to
be loaded by turning the dial or pressing the [-/DEC] and
[+/INC] buttons. Only those files matching your selected
file type will be presented for loading. If you have opted to
load a single file, you will first of all need to select the All
file that contains it (for example, when loading a single
User kit, you first select a file saved with the type
AllKit”). It is not, however, possible to load a single file
when an All type has been selected for loading.
5. When you have selected the file to be loaded, press the
[F3] button.
Case 1: If “All”, “AllKit”, “AllWave”, “AllSong”, “All-
Trigger, or “Utility” was selected:
Press the [F3] button (EXECUTE) and proceed to
Step 7.
Case 2: If “Kit”, “Wave”, “Song”, or “Trigger” was
selected:
Press the [F3] button (NEXT >>) and proceed to
Step 6.
6. Select the required package of data from inside the
selected file.
6-1 Move the cursor to Src or Dst and press the dial.
Src indicates the file that will be loaded (i.e., the
source), and Dst indicates where it will be saved
within the DTX700 (i.e., the destination).
6-2 Turn the dial or press the [-/DEC] and [+/INC] but-
tons to select the file you wish to load and the num-
ber of the User kit, User wave, User song, or User
trigger to be overwritten.
6-3 When you have set either Src or Dst, press the dial
once again.
When loading a kit:
Settings: 01 to 60
When loading a wave:
Settings: 001 to 500
When loading a song:
Settings: Src 01 to 98, Dst 01 to 93
NOTE
Src = 98 corresponds to data recorded by press-
ing the [REC] button.
FILE/LOAD
All
All User data – i.e., all User kits, User
waves, User songs, and User triggers in
addition to utility data
AllKit All User kit data
Kit A single User kit
AllWave All wave data
Wave A single User wave
AllSong All User song data
Song A single User song
AllTrigger All User-trigger data
Trigger A single User trigger setup
Utility Utility data
FILE
DTX700 Reference Manual
60
When loading a trigger:
Settings: 01 to 20
7. When you have finished making your selections, press the
[F3] button.
You will be asked to confirm that the file is to be loaded.
8. Press the dial to begin loading.
The following message will be displayed as the data is
being loaded.
CAUTION
Do not unplug the USB memory device from the
[USB TO DEVICE] port or turn off either the mem-
ory device or the DTX700 while data is being
loaded. Failure to observe this precaution can lead
to the memory device or the DTX700 being perma-
nently damaged.
When the data has been loaded, you will be returned to the
page from Step 5 or 6 accordingly.
Carry out the following steps to rename a file saved
on a USB memory device.
Procedure
1. Plug the USB memory device containing the file to be
renamed into the [USB TO DEVICE] port on the side
panel.
2. Navigate to the Menu area’s File/Rename page.
The page will appear as follows.
3. Use the Type parameter to select the type of file to be
renamed.
3-1 Turn the dial to move the cursor to the Type row, and
then press the dial.
3-2 Turn the dial to select the type of file to be renamed.
Settings: All, AllKit, AllWave, AllSong, AllTrigger, Util-
ity
3-3 When you have made your selection, press the dial
once again.
4. Select the file to be renamed.
4-1 Turn the dial to move the cursor to the File row, and
then press the dial.
4-2 Turn the dial to select the file to be renamed.
4-3 When you have made your selection, press the dial
once again.
FILE/RENAME
All
All User data – i.e., all User kits, User
waves, User songs, and User triggers
in addition to utility data
AllKit All User kit data
AllWave All wave data
AllSong All User song data
AllTrigger All User-trigger data
Utility Utility data
FILE
DTX700 Reference Manual
61
5. Set a new name for the file.
Move the cursor to the Name row and press the dial to call
up the file naming page.
Entering file names
5-1 Move the cursor within the name field using the [F1]
and [F3] buttons and select a character for that posi-
tion by turning the dial or pressing the [-/DEC] and
[+/INC] buttons. The following characters can be
used.
NOTE
If you hold down the [SHIFT] button and press the
[F1] or [F3] button, the cursor will move to the start
or end of the file name field.
If you hold down the [SHIFT] button and press the
[-/DEC] or [+/INC] button, or alternatively, hold
down the [SHIFT] button and turn the dial, the cur-
sor will jump between the “ , “0”, “A, and “~” char-
acters.
5-2 When you have entered the required name, press the
dial or the [EXIT] button to return to the previous
page.
NOTE
Any space characters included in file names will
be automatically replaced with “_” (i.e., an under-
score).
6. When you have set the new file name, press the [F3] but-
ton (EXECUTE). You will be asked to confirm that the file
is to be renamed.
7. Press the dial to rename the file.
When the renaming process has been completed, the mes-
sage “Completed.” will be displayed and you will be
returned to the page from Step 2 above.
CAUTION
Do not unplug the USB memory device from the
[USB TO DEVICE] port or turn off either the mem-
ory device or the DTX700 while a file is being
renamed. Failure to observe this precaution can
lead to the memory device or the DTX700 being
permanently damaged.
Carry out the following steps to delete files saved on
a USB memory device.
Procedure
1. Plug the USB memory device containing the file(s) to be
deleted into the [USB TO DEVICE] port on the side
panel.
2. Navigate to the Menu area’s File/Delete page.
The page will appear as follows.
3. Select the type of file you wish to delete.
3-1 Turn the dial to move the cursor to the Type row, and
then press the dial.
3-2 Select the type of file to be deleted by turning the dial
or pressing the [-/DEC] and [+/INC] buttons.
Settings: All, AllKit, AllWave, AllSong, AllTrigger, Util-
ity
3-3 When you have made your selection, press the dial
once again.
FILE/DELETE
All
All User data – i.e., all User kits, User
waves, User songs, and User triggers
in addition to utility data
AllKit All User kit data
AllWave All wave data
AllSong All User song data
AllTrigger All User-trigger data
Utility Utility data
FILE
DTX700 Reference Manual
62
4. Turn the dial to move the cursor to the File row, and then
press the dial.
5. Select the file to be deleted by turning the dial or pressing
the [-/DEC] and [+/INC] buttons.
Only those files matching your selected file type from the
previous step will be presented for deletion.
6. Press the [F3] button (EXECUTE).
You will be asked to confirm that data is to be deleted.
7. Press the dial to begin deleting.
When the deletion process has been completed, the mes-
sage “Completed.” will be displayed and you will be
returned to the page from Step 2 above.
CAUTION
Do not unplug the USB memory device from the
[USB TO DEVICE] port or turn off either the mem-
ory device or the DTX700 while data is being
deleted. Failure to observe this precaution can lead
to the memory device or the DTX700 being perma-
nently damaged.
Certain types of USB memory device must be for-
matted before they can be used with the DTX700.
The correct way to format such a device is described
below.
CAUTION
All data on the USB memory device will be deleted during
the formatting process. Before formatting such a device,
therefore, ensure that any important data it contains is
backed up.
NOTE
In certain cases, USB memory devices formatted on a com-
puter will not be recognized by the DTX700. Be sure, there-
fore, to always use the drum trigger module to format memory
devices that will be used with it.
Procedure
1. Plug the USB memory device to be formatted into the
[USB TO DEVICE] port on the side panel.
2. Navigate to the Menu area’s File/Format page and press
the [F3] button (EXECUTE). You will be asked to confirm
that the USB memory device is to be formatted.
3. Press the dial to begin the formatting process.
The following message will be displayed as the device is
being formatted.
CAUTION
When a USB memory device is being formatted, it
must not be unplugged from the [USB TO DEVICE]
port; furthermore, neither the memory device nor
the DTX700 should be turned off at this time. Fail-
ure to observe this precaution can lead to the mem-
ory device or the DTX700 being permanently
damaged.
When the formatting process has been completed, the
message “Completed.” will be displayed and you will be
returned to the page from Step 2 above.
FILE/FORMAT
FILE
DTX700 Reference Manual
63
To confirm the memory-usage status of the cur-
rently-connected USB memory device, navigate to
the Menu area’s File/MemInfo (Memory Info) page.
q Memory available (MB)
This indicates the amount of unused USB-device memory in
megabyte (MB) units.
w Memory availability ratio (%)
This indicates how much of the total USB-device memory is cur-
rently unused in percentage format.
e Total memory (MB)
This indicates the total USB-device memory in megabyte (MB)
units.
NOTE
The units used here will depend on the corresponding memory
size (i.e., KB for kilobytes, MB for megabytes, and GB for giga-
bytes).
FILE/MEMORY INFO
w eq
DTX700 Reference Manual 64
Troubleshooting
Check connections as follows.
Ensure that the DTX700 is properly connected to headphones or an external audio system, such as an amplifier and/or speakers.
Ensure that the cables you are using are in good condition.
Confirm whether volumes and/or output levels are set correctly using the following.
Volume controllers on amplifiers and/or speakers connected to the DTX700.
The [MASTER] knob on the DTX700 front panel.
The sliders on the DTX700 front panel.
The Volume parameter from the Menu area’s Kit/Common page. (See page15.)
The Volume parameter from the Menu area’s Kit/Voice page. (See page18.)
The MasterVolume parameter from the Menu area’s Utility/General page. (See page37.)
The trigger output level of any pads with a dial allowing this to be adjusted.
Check relevant trigger settings as follows.
Ensure that the PadType parameter from the Menu area’s Trigger/Pad/Pad Type page has been set correctly. (See page46.)
Ensure that the VelCurve (Velocity Curve) parameter from the Menu area’s Trigger/Pad/Curve page and the Gain parameter from
the Trigger/Pad/Pad Type page have been set appropriately. (See pages45, 46.)
Ensure that the MinLevel (Minimum Level) parameter from the Menu area’s Trigger/Pad/Pad Type page has not been set too high,
as this can prevent sound from being output. (See page47.)
Check relevant effect and filter settings as follows.
If using filters, re-adjust your cutoff-frequency settings as they often prevent sound from being output.
Ensure that the Attack (Attack Time) and Decay (Decay Time) parameters from the Menu area’s Kit/Voice page have been set
appropriately. (See page18.)
Check relevant MIDI settings as follows.
Ensure that the MessageType parameter from the Menu area’s Kit/MIDI/Assign page is set to “note.
Ensure that the VoiceNumber parameter from the Menu area’s Kit/Voice page is not set to “no assign.(See pages17, 20.)
Ensure that the VelLimitLo (Velocity Limit: Low) parameter from the Menu area’s Kit/MIDI/Assign page is not set too high. (Pads will
produce sound only when struck harder than the value set here. See page22.)
Ensure that the TrgVel (Trigger Velocity) parameter from the Menu area’s Kit/MIDI/Assign page is not set too low. (Low trigger veloc-
ities result in low output volumes. See page23.)
Ensure that the LocalCtrl (Local Control) parameter from the Menu area’s Utility/MIDI page is set to “on. (See page41.)
Ensure that the Note parameter for all layers on the Menu area’s Kit/MIDI/Assign page have not been set to “off, “skip”, or a value
marked with as asterisk (*). (In such a case, no layer will be configured to produce a sound. See page21.)
If an assigned wave does not play, try the following.
Ensure that the data for the wave assigned to the pad in question has not been deleted.
If you restored the Factory Set, ensure that the wave data has been loaded back in from a USB memory device. (Waves are not
included when only kit data is loaded from a USB memory device. See page59.)
Check relevant pad settings as follows.
Ensure that the PadFunc (Pad Function) parameter from the Menu area’s Utility/Pad page is set to “off. (See page40.)
No sound is produced when a pad is struck, or the volume is lower than expected.
Troubleshooting
DTX700 Reference Manual
65
If an external instrument connected via MIDI does not produce sound as expected, try the following.
Ensure that MIDI cables have been correctly connected.
Ensure that the MIDI IN/OUT parameter from the Menu area’s Utility/MIDI page has been set correctly. (If set to “USB”, MIDI data
will not be sent to external MIDI devices connected via MIDI cables. See page41.)
Ensure that the DTX700 is sending data on the MIDI channel on which the external tone generator is set to receive it. (See page20
for details regarding general MIDI settings, or page 34 for details regarding MIDI settings for song playback.)
Ensure that the MIDI Switch parameter from the Menu area’s Kit/MIDI/TG MIDI Switch page is set to “on. (MIDI messages are not
sent when the external MIDI switch is turned off, meaning that you will be unable to play external MIDI devices using your DTX700.
See page23.)
Ensure that the PadFunc (Pad Function) parameter from the Menu area’s Utility/Pad page is set to “off. (No sound will be produced
by any pad with a function assignment. See page40.)
Ensure that the MessageType parameter from the Menu area’s Kit/MIDI/Assign page is set to “note. (No sound will be produced for
any other setting. See page20.)
Ensure that the VelLimitLo (Velocity Limit: Low) parameter from the Menu area’s Kit/MIDI/Assign page is not set too high. (Pads will
produce sound only when struck harder than the value set here. See page22.)
Ensure that the MinLevel parameter from the Menu area’s Trigger/Pad/Pad Type page has not been set too high, as this can pre-
vent sound from being output. (See page47.)
If foot closed hi-hat sounds cannot be played, try the following.
Ensure that you are operating the hi-hat controller in a firm and full manner.
Ensure that the hi-hat controller is not configured to produce a kick drum sound (i.e., Double Bass mode). To do so, press the
[INST] button to access the Instrument page, and then hold down the [SHIFT] button and press the [F2] button (DBL BASS).
Lower the setting of the FootClosePos (Foot Closed Position) parameter from the Menu area’s Utility/Pad page. (See page40.)
It is difficult to produce hi-hat sounds, note the following.
In certain cases, hi-hat sounds will be more difficult to produce when the hi-hat controller is configured to produce a kick drum
sound (i.e., Double Bass mode).
If the volumes of the DTX700 and external audio devices are not well balanced, proceed as follows.
Individually adjust the output volumes of the DTX700 and the external audio devices.
If headphones are connected but nothing can be heard in them, proceed as follows.
Ensure that the [PHONES] knob is set to an appropriate volume.
If the sliders have no effect on volumes, proceed as follows.
Ensure that the SliderSelect parameter from the Menu area’s Kit/Voice page is set to one of the sliders for the pad in question. (If
set to “no assign, none of the sliders will adjust the pad’s volume.)
If you cannot lower the pad song volume, proceed as follows.
Adjust the pad song volume using the Accompaniment fader from the Volume page, accessed by pressing the [SONG] button and
then the [F1] button (VOLUME).
If a pad produces a sound other than that intended, try the following.
Ensure that trigger setups have been configured correctly.
If an external MIDI instrument played from the DTX700 does not produce the expected sounds, review its voice settings for the MIDI
channel on which the DTX700 is sending data, and ensure that they are appropriate for the MIDI data being sent.
Adjust the setting of the FootSplashSens (Foot Splash Sensitivity) parameter from the Menu area’s Utility/Pad page. (Hi-hat splash
sounds will not be produced if “off” has been set here. See page40.)
If pads are producing only sounds at very high volumes (i.e., high velocities), try the following.
Ensure that the Gain parameter from the Menu area’s Trigger/Pad/Pad Type page is not set too high. (See page46.)
Adjust the setting of the VelCurve (Velocity Curve) parameter from the Menu area’s Trigger/Pad/Curve page. (See page45.)
Ensure that the TrgVel (Trigger Velocity) parameter from the Menu area’s Kit/MIDI/Assign page has been set appropriately. (If, for
example, this parameter is set to “127”, the maximum velocity will be produced even when the pad is struck lightly. See page23.)
Ensure that you are using only the recommended Yamaha external pads. (Products from other manufacturers can output exces-
sively large signals.)
Sounds continue to play without end, are distorted, or are stuttered, etc.
Troubleshooting
DTX700 Reference Manual
66
If sounds output from the DTX700 appear to be distorted, try the following.
Ensure that effects have been set appropriately. (Sound can be distorted with certain combinations of effect type and parameter
settings. See page7.)
Ensure that the Filter parameter from the Menu area’s Kit/Voice page has been set appropriately. (Depending on the type of sound
being filtered, certain resonance settings (Q) can produce distortion. See page19.)
Lower the DTX700’s master volume.
If sounds play endlessly and do not stop, try the following.
Check whether the RcvKeyOff (Receive Key Off) parameter from the Menu area’s Kit/MIDI/Assign page has been set to “off. If so,
certain types of voice will play endlessly when triggered. (See page22. Note that you can silence all voices at any time by holding
down the [SHIFT] button and pressing the [EXIT] button. )
If the voice in question is a wave, check whether the PlayMode parameter from the Menu area’s Wave/Common page is set to
“loop”. If so, certain types of voice will play endlessly when triggered. (See page53.)
If sounds stop unexpectedly during rolls and flams, try the following.
Check the Mode parameter from the Menu area’s MIDI/Assign page and remove any unnecessary note assignments for stack or
alternate playing.
Ensure that the Mono/Poly (Polyphony) parameter from the Menu area’s Kit/Voice page is set to “poly”. (See page19.)
If certain voices are not played during rolls and flams, proceed as follows.
Lower the setting of the RejectTime parameter from the Menu area’s Trigger/Pad/Pad Type page. (See page46.)
If the DTX700 sounds like it is out of tune or playing the wrong note, try the following.
Adjust the setting of the MasterTune parameter from the Menu area’s Utility/General page. (See page37.)
Adjust the setting of the Tune parameter from the Menu area’s Kit/Voice page. (See page18.)
If effects cannot be applied, try the following.
Turn off the Effect Bypass ([KIT]m[SHIFT]+[F2]).
Ensure that “enable” has been selected for the effect(s) in question on the Menu area’s Utility/Effect Switch page. (See page41.)
Ensure that the VarSend(Dry) (Variation Send Level), ChoSend (Chorus Send Level), and RevSend (Reverb Send Level) parame-
ters from the Menu area’s Kit/Voice page have been set appropriately. (See page19.)
Ensure that the ChoSend (Chorus Send Level) and RevSend (Reverb Send Level) parameters from the Menu area’s Kit/Effect/
Mixer page have been set appropriately. (See pages26, 27.)
Ensure that the Type parameter from the Menu area’s Kit/Effect/Variation page has not been set to “No Effect”. (See page27.)
Ensure that the Type parameter from the Menu area’s Kit/Effect/Chorus page has not been set to “No Effect”. (See page27.)
Ensure that the Type parameter from the Menu area’s Kit/Effect/Reverb page has not been set to “No Effect”. (See page27.)
If a performance recorded as song data sounds different when played back, try the following.
Turn off the Kit Lock. To do so, press the [KIT] button to access the Kit page, and then hold down the [SHIFT] button and press the
[F1] button (KIT LOCK).
Ensure that the Rcv10ch (Channel 10 Receive), RcvPC (Program Change Receive), and RcvPC10Ch (Channel-10 Program
Change Receive) parameters from the Menu area’s Utility/MIDI page are all set to “on.
If the volumes of sounds produced by different pads are poorly balanced, proceed as follows.
Ensure that the sliders on the front panel have been set appropriately.
If unintended sounds are also produced when playing a pad, proceed as follows.
Check whether these sounds have been assigned to layers B, C, or D for the pad in question, and if so, remove them.
If changing one pad’s sound leads to other pad sounds also changing, proceed as follows.
Ensure that the same note number has not been assigned to each of the pads using the Note parameter from the Menu area’s Kit/
MIDI/Assign page.
If a variation effect is applied to a two-zone or three-zone pad, but the sound from only one of the zones appears to
change, proceed as follows.
Apply the effect to each zone individually.
Troubleshooting
DTX700 Reference Manual
67
If song playback does not stop as expected when you press the [>/] button, proceed as follows.
Hold down the [SHIFT] button and press and hold the [EXIT] button for at least one second.
If the Decay parameter from the Menu area’s Kit/Voice page or the Instrument page has no effect on a wave, pro-
ceed as follows.
Ensure that the Decay parameter from the Menu area’s Wave/Common page is set to a value less than 127.
If hi-hat sounds are occasionally produced even though the hi-hat controller is configured to produce a kick drum
sound (i.e., Double Bass mode), proceed as follows.
Select the hi-hat pad and increase the setting of the MinLevel (Minimum Level) parameter from the Menu area’s Trigger/Pad/Pad
Type page. Note that if this setting is too high, it may become difficult to play the hi-hat.
If song playback cannot be started, try the following.
Ensure that the currently selected song actually contains data.
If the MIDI Sync (MIDI Synchronization) parameter from the Menu area’s Utility/MIDI page has been set to “ext”, ensure that the
DTX700 receives MIDI Clock messages correctly from an external MIDI device or a computer.(See page41.)
If a song plays endlessly and does not stop, proceed as follows.
Hold down the [SHIFT] button and press the [EXIT] button.
If you are attempting to change a wave’s tempo, note the following.
Waves have fixed tempos. They will always play at the tempo of the original imported file regardless of drum kit tempo and other
similar settings.
If a parameter setting you wish to change is displayed as “---” and cannot be modified, try the following.
Ensure that the PadFunc (Pad Function) parameter from the Menu area’s Utility/Pad page is set to “off. (See page40.)
Ensure that the Note parameter from the Menu areas Kit/MIDI/Assign page has not been set to “off” for all four layers, A through D.
(See page21.)
If a pad controller does not work as expected, try the following.
Ensure that the PadFunc (Pad Function) parameter from the Menu area’s Utility/Pad page is not set to “off.
Avoid holding the rim while adjusting the pad controller as this can prevent it from working properly.
If you are trying to record multiple songs using the [REC] button, note the following.
The DTX700 can only store one recorded song at a time. If a new recording is made, the current one will be overwritten.
If you cannot change the current kit using the dial or the [-/DEC] and [+/INC] buttons, proceed as follows.
Turn off the kit lock. To do so, press the [KIT] button to access the Kit page, and then hold down the [SHIFT] button and press the
[F1] button (KIT LOCK).
If double triggers are being produced, try the following.
Ensure that trigger setups have been configured correctly.
If the pad or drum trigger in question features a controller for adjusting output or sensitivity, turn it downward.
Ensure that the Gain parameter from the Menu area’s Trigger/Pad/Pad Type page is not set too high. (See page46.)
Ensure that you are using only the recommended Yamaha drum triggers or trigger sensors. (Products from other manufacturers can
output excessively large signals, which in turn can result in double triggering.)
Ensure that the heads are not vibrating in an irregular manner, and mute them if so required.
Ensure that drum triggers are attached in the vicinity of the rim and not near the center of the head.
Ensure that no other objects are coming into contact with the drum trigger.
Raise the setting of the RejectTime parameter from the Menu area’s Trigger/Pad/Pad Type page. (Avoid setting too large a reject
time, as this can make it impossible to accurately detect flams, rolls, and the like. See page46.)
Values cannot be changed or buttons do not work as expected, etc.
Multiple sounds are produced when a single pad is struck.
Troubleshooting
DTX700 Reference Manual
68
If crosstalk is occurring (i.e., sound is produced by a pad other than the one that was struck), try the following.
Ensure that trigger setups have been configured correctly.
Ensure that the RejectLevel parameter from the Menu area’s Trigger/Pad/Crosstalk page is set appropriately. (See page48.)
If using a separately-sold pad featuring a level adjuster, ensure that the level is set appropriately.
Ensure that the MinLevel (Minimum Level) parameter from the Menu area’s Trigger/Pad/Pad Type page has been set appropriately.
(See page47.)
If only one voice is produced when two pads are played simultaneously, try the following.
Ensure that trigger setups have been configured correctly.
Go to the Menu area’s Trigger/Pad/Pad Type page, select the pad for which a sound is not being produced, and raise the value of
its Gain parameter. (See page46.)
Go to the Menu area’s Trigger/Pad/Pad Type page, select the pad for which a sound is not being produced, and lower the value of
its MinLevel (Minimum Level) parameter. (See page47.)
Go to the Menu area’s Kit/Voice page and check whether both pads have been assigned to the same alternate group using the Alt-
Group parameter. In certain cases, this can lead to only one sound being produced. (See page20.)
Ensure that the TrgAltGrp (Trigger Alternate Group) parameter from the Menu area’s Kit/MIDI/Assign page is set to “off. (See
page23.)
If consistent, reliable trigger signals cannot be produced using an acoustic drum, try the following.
Ensure that you are using a high-quality drum trigger such as the DT20, and that it is secured firmly in place using adhesive tape.
(Remember to also remove any old tape.)
Carry out the checks listed above in the section “No sound is produced when a pad is struck, or the volume is lower than expected.”.
Ensure that the signal cable is securely plugged into the jack on the DT20 or other drum trigger.
If closed hi-hat sounds cannot be played, proceed as follows.
Ensure that the Type parameter from the Menu area’s Trigger/Pad/Pad Type page is set correctly. (See page46.)
If, when using a cymbal pad, edge and cup sounds cannot be played or the choking technique does not work, pro-
ceed as follows.
Ensure that the Type parameter from the Menu area’s Trigger/Pad/Pad Type page is set correctly. (A suitable cymbal-pad type must
be selected for the pad being used. See page46.)
If hi-hat splash sounds are not produced as expected, try the following.
Ensure that the foot controller is correctly connected to the [HI-HAT CONTROL] trigger input jack.
Adjust the setting of the FootSplashSens (Foot Splash Sensitivity) parameter from the Menu area’s Utility/Pad page. (Hi-hat splash
sounds will not be produced if “off” has been set here. See page40.)
If a hi-hat controller connected via the [HH-KICK] trigger input jack does not work as expected, try the following.
Ensure that the hi-hat controller is connected to the DTX700 using the correct type of cable.
Ensure that you are using an HH65 Hi-hat Controller. (Other types will not operate correctly with the DTX700.)
Ensure that the Cubase Remote function is not turned on.
Optional add-on products do not operate as expected.
Nothing happens when buttons on the front panel are pressed.
Troubleshooting
DTX700 Reference Manual
69
If data cannot be saved on a USB memory device, try the following.
Ensure that the USB memory device in question has been formatted using the DTX700. (See page62.)
Ensure that the USB memory device in question has not been write-protected.
Ensure that there is sufficient free space on the USB memory device to save the data. (You can check the amount of free space
available on the Menu area’s File/Memory Info page. See page63.)
If a standard MIDI file cannot be read from a USB memory device, try the following.
Ensure that the standard MIDI file in question is of Format 0. (Format 1 files cannot be read.)
Ensure that the file to be read is located within the USB memory devices root directory (that is, not within any folder).
If a wave file cannot be read from a USB memory device, try the following.
Ensure that the wave file in question is 16-bit.
Ensure that there is sufficient free space in the DTX700 to load the wave file.
Ensure that the USB memory device in question has been formatted using the DTX700. (See page62.)
Ensure that the file to be read is located within the USB memory devices root directory (that is, not within any folder).
If using USB cables, ensure that they are connected correctly.
Ensure that the MIDI IN/OUT parameter from the Menu area’s Utility/MIDI page has been set correctly. (If you want to exchange
MIDI data with a computer via USB, ensure that the MIDI IN/OUT parameter is set to “USB”. Alternatively, if you want to exchange
MIDI data with external devices via MIDI cables, ensure that this parameter is set to “MIDI”. See page41.)
If starting a sequencer connected via MIDI causes the DTX700 to also start playback or vice-versa, proceed as fol-
lows.
Ensure that the SeqCtrl (Sequencer Control) parameter from the Menu area’s Utility/MIDI page has been set correctly. (See
page42.)
If the Cubase Remote function cannot be activated, try the following.
Ensure that the DTX700 and the computer have been correctly connected.
Ensure that the MIDI IN/OUT parameter from the Menu area’s Utility/MIDI page has been set correctly. (In order to enable commu-
nication with a computer via USB, ensure that this parameter is set to “USB”. See page41.)
If the Cubase Remote function does not work as expected, proceed as follows.
Ensure that the DTX700 Extension has been installed on the computer in question.
If data cannot be exchanged with DAW applications, note the following.
When the Auto Power-Off function activates to turn off the DTX700, any connection with DAW software will be lost. To restore this
connection, close the DAW application, turn the DTX700 back on, and then launch the application once again. It is advisable to dis-
able the Auto Power-Off function when exchanging data with a computer.
Difficulties are experienced with procedures involving USB memory devices.
MIDI data cannot be exchanged with a computer or external MIDI device.
1/69