Yamaha TX-10RDS Manual de usuario

Tipo
Manual de usuario

Este manual también es adecuado para

Natural Sound AM/FM Stereo Tuner
Syntonisateur AM/FM stéréo de la série “Natural Sound”
“Natural Sound” MW/UKW-Stereo-Tuner
Natural Sound AM/FM stereotuner
Sintonizzatore stereo AM/FM a suono naturale
Sintonizador estéreo de AM/FM de sonido natural
Natural Sound Stereo Tuner
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
TX-10
Indoor FM Antenna
Antenne FM intérieure
UKW-Innenantenne
FM inomhusantenn
Antenna FM per interni
Antena FM interior
FM Binnenantenne
Audio connection cord
Câble de connexion audio
Audio-Anschlußkabel
Audio anslutningssladdar
Cavo di collegamento audio
Cable de conexión de audio
Audio aansluitkabel
AM Loop Antenna
Cadre-antenna AM
MW-Rahmenantenne
AM ramantenn
Antenna AM ad anello
Antena de cuadro de AM
AM Lusantenne
2
SUPPLIED ACCESSORIES
After unpacking, check that the following parts are contained.
ACCESSOIRES FOURNIS
Après le déballage, vérifier que les pièces suivantes sont incluses.
MITGELIEFERTE ZUBEHÖRTEILE
Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind.
MEDFÖLJANDE TILLBEHÖR
Kontrollera efter det apparaten packats upp att följande delar finns med.
ACCESSORI IN DOTAZIONE
Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio.
ACCESORIOS INCLUIDOS
Desembale el aparato y verificar que los siguientes accesorios están en la caja.
BIJGELEVERDE ACCESSOIRES
Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
FEATURES
40 Station Random Access Preset Tuning
Automatic Preset Tuning
Multi-Status Station Memory
Direct PLL Synthesizer Tuning
Preset Station Shifting Capability
Multi-Functions for RDS Broadcast Reception
(U.K. and Europe models only)
CONTENTS
Supplied Accessories......................................................2
Caution............................................................................3
Connections....................................................................4
Tuning Operations ..........................................................7
Preset Tuning..................................................................9
Receiving RDS Stations (U.K. and Europe models only)
......................................................................................12
Troubleshooting............................................................17
Specifications................................................................18
3
English
Thank you for selecting this YAMAHA stereo tuner
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1. This unit is a sophisticated stereo tuner. To assure proper
operation and the best possible performance, please read
this manual carefully.
2. Choose the installation location for the unit carefully.
Avoid placing it in direct sunlight or close to a source of
heat. Also avoid locations subject to vibration and
excessive dust, heat, cold or moisture. Keep it away from
such sources of hum as transformers or motors.
3. Do not open the cabinet, because this may result in
damage to the unit or electrical shock. If a foreign object
should get into the unit, contact your local dealer.
4. When not planning to use this unit for long periods of time
(ie., vacation, etc.), disconnect the AC power plug from the
wall outlet.
5. To prevent lightning damage, disconnect the AC power
plug and disconnect the antenna cable when there is an
electrical storm.
6. When disconnecting the power plug from the wall outlet,
always pull directly on the plug; never pull the cord itself.
7. Do not use force when operating switches and other
controls.
8. When moving the unit, be sure to first disconnect the
power plug and disconnect all wires connected from the
unit to other equipment.
9. Do not attempt to clean this unit with chemical solvents,
because this may damage the finish. Use a clean, dry
cloth.
10.Be sure to read the “TROUBLESHOOTING” section of this
manual for advice on common operating errors before
concluding that the unit is faulty.
11.Keep this manual in a safe place for future reference.
12.Voltage Selector (General Model only)
The voltage selector on the rear panel of this unit must be set
for your local main voltage BEFORE plugging into the AC
main supply.
Voltages are 110-120/220-240V AC, 50/60 Hz.
FREQUENCY STEP switch (General Model only)
Because the interstation frequency spacing differs in different
areas, set the FREQUENCY STEP switch (located at the rear)
according to the frequency spacing in your area.
Before setting this switch, disconnect the AC power plug of this unit
from the AC outlet.
The apparatus is not disconnected from the AC power
source as long as it is connected to the wall outlet, even if
the apparatus itself is turned off.
IMPORTANT
Please record the serial number of this unit in the space
below.
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION (FOR CANADA MODEL)
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT AND FULLY INSERT.
FOR CANADIAN CUSTOMER
THIS DIGITAL APPARATUS DOES NOT EXCEED THE “CLASS B”
LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL
APPARATUS SET OUT IN THE RADIO INTERFERENCE
REGULATION OF THE CANADIAN DEPARTMENT OF
COMMUNICATIONS.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN THE MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
The colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug. Proceed as follows: the wire
which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured BLACK. The
wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
ANTENNA CONNECTIONS
Each antenna should be connected to the designated terminals correctly, referring to the following figure.
Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal
strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experience
poor reception quality, an outdoor antenna may result in improvement.
4
CONNECTIONS
75 UNBAL.
FM ANT GND AM ANT
Outdoor FM antenna
Outdoor AM antenna
AM loop
antenna
(included)
Ground
75-ohm/300-ohm
antenna adapter
75-ohm coaxial cable
300-ohm flat
ribbon cable
Indoor FM
antenna
(included)
75-ohm
antenna
adapter
m Optional outdoor FM antenna
Consult with your dealer or authorized service center about the
best method of selecting and erecting an outdoor FM antenna.
The choice of the feeder cable is also important. Flat ribbon-
shaped twin-lead cable performs well electrically, and is
cheaper and somewhat easier to handle when routing it
through windows and around rooms. Coaxial cable is more
expensive, does a much better job of minimizing interference,
is less prone to the effects of weather and close-by metal
objects, and is nearly as good a signal conductor as feeder
cable, particularly for foam-type coaxial cables. Coaxial cable
is somewhat more difficult to install at the point where the
cable enters the building. If coaxial cable is selected, make
sure the antenna is designed to be used with that type of
cable.
* Use a 75-ohm/300-ohm antenna adapter (not included) or a
75-ohm antenna adapter (not included) for connections.
300-ohm feeder cable 75-ohm coaxial cable
75-ohm/300-ohm antenna adapter
Notes for FM antenna installation
To minimize automobile ignition noise, locate the antenna
as far from heavy traffic as possible.
Keep the feeder cable or coaxial cable as short as possible.
Do not bundle or roll up excess cable.
The antenna should be at least two meters (6.6 feet) from
reinforced concrete walls or metal structures.
5
English
Connecting the indoor FM antenna
*If you connect an outdoor FM antenna to this unit, do not connect the indoor FM antenna to this unit.
Connecting the AM loop antenna
Orient so that the best
reception is obtained.
* The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.
* The AM loop antenna should be kept connected, even if an outdoor AM antenna is connected to this unit.
300-ohm feeder
cable
75-ohm coaxial
cable
75-ohm antenna
adapter
75-ohm coaxial
cable
m Optional outdoor AM antenna
In steel buildings or at a great distance from the transmitter, it
may be necessary to install an outside long wire antenna.
GND terminal
For maximum safety and minimum interference, connect
the GND terminal to a good earth ground. A good earth
ground is a metal stake driven into moist earth.
6
CONNECTIONS TO THE AMPLIFIER
Before making any connections, switch OFF the power to
this unit and the amplifier or other component.
Be sure that the connections from the left (“L”) and right
(“R”) LINE OUT terminals are connected to the
corresponding (left and right) input terminals of the amplifier
or other component.
* When connecting with the YAMAHA amplifier AX-10,
connect this unit’s LINE OUT terminals to the TUNER
terminals (numbered 2) on the rear of AX-10.
*This unit has a remote control sensor. It receives signals
from the remote control transmitter provided with a
YAMAHA amplifier.
75 UNBAL.
FM ANT GND AM ANT LINE OUT
2
R
L
2
TUNER
R
L
Amplifier
Connection cord (included)
This unit
To AC outlet
Remote control sensor
1
2 Select the reception band while watching the display.
3
4 If “PRESET” is being illuminated on the display, press
the KEY MODE button to turn it off.
5 Tune to a desired station.
To tune to a higher frequency, press the UP button
once. To tune to a lower frequency, press the DOWN
button once.
6 If the station where tuning search stopped is not the
desired one, press again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change
to the MANUAL TUNING method as described on the
following page.
To turn off the power
Press the POWER switch again.
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING
7
English
TUNING OPERATIONS
STANDBY/ON
FM/AM
TUNING
MODE
AUTO/
MAN’L MONO
AUTO
DOWN UP
PRESET STATIONS
TUNING
DOWN UP
PRESET STATIONS
TUNING
1 3 4 2 5, 6
<U.K. and Europe models><General model>
ENTER
KEY MODE
ENTER/
KEY MODE
<U.K. and Europe models>
<General model>
or
1 3 4 2 5, 6
1 Follow steps 1 and 2 on the previous page.
2
3 If “PRESET” is being illuminated on the display, press
the KEY MODE button to turn it off.
4 Tune to a desired station manually.
* To continue tuning search, press and hold the button.
Note
If you tune to an FM station manually, it is received in
monaural mode automatically to increase the signal quality.
MANUAL TUNING
8
TUNING
MODE
AUTO/
MAN’L MONO
“AUTO” goes off.
Display information
Displays the band and frequency of the received station.
*
<U.K. and Europe models only>
If an RDS station is received, the frequency is then
replaced by the station name. (However, if the PS data
cannot be received within 5 seconds, “NO PS” flashes,
and then it returns to the frequency display.)
Refer to page 13 for details.
Illuminates when an FM stereo broadcast is received in
stereo.
Indicates the signal level of the received station.
AUTO
MHz
ST
1
2
3
DOWN UP
PRESET STATIONS
TUNING
2 3 4
<U.K. and Europe models><General model>
2 3 4
ENTER
KEY MODE
ENTER/
KEY MODE
<U.K. and Europe models>
<
General model>
9
English
11 Select the page where the preset station is stored.
22 If “PRESET” is not being illuminated on the display,
any preset station cannot be recalled. If so, press the
KEY MODE button to turn it on.
33
Select the preset station number.
1 Tune to a desired station.
(Refer to the previous page for tuning procedures.)
2
3 Select a desired page (A – E) of preset stations while
watching the display before “MEMO” goes off from the
display.
4
Select a preset station number (1–8) while watching the
display before “MEMO” goes off from the display.
5
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations on other pages in the
same way by selecting other pages in step 3.
MANUAL PRESET TUNING
This unit can store station frequencies selected by tuning operation. With this function, you can recall any desired station by only
selecting the preset station number where it is stored. Up to 40 stations (8 stations x 5 pages) can be stored.
To store stations To recall a preset station
MEMORY
MAN’L/
AUTO FM
MEMORY
MAN’L/
AUTO FM
MEMO
Flashes on and off
for about 5 seconds.
A/B/C/D/E
PRESET
A/B/C/D/E
PRESET
DOWN UP
PRESET STATIONS
TUNING
DOWN UP
PRESET STATIONS
TUNING
AUTO
MHz
ST
PRESET
Shows the displayed station
has been programmed to A1.
PRESET TUNING
2, 5 22 3, 11 4, 33
<U.K. and Europe models><General model>
2, 5 22 3, 11 4, 33
ENTER
KEY MODE
ENTER/
KEY MODE
<U.K. and Europe models>
<
General model>
Notes
A new setting can be programmed in place of the former
one.
For presets, the setting of the reception mode (stereo or
monaural) is stored along with the station frequency.
1
2
3
The automatic preset tuning begins from the frequency
currently displayed. Received stations are programmed to
A1, A2 ... A8 sequentially.
* If more than 8 stations are received, they are also
programmed to the preset station numbers on other pages
(B, C, D and E) in that order.
If you want to store the first station received by the
automatic preset tuning to a desired preset station
number.
If, for example, you want to store the first received station to
C5, select “C5” by using the A/B/C/D/E button and the
PRESET STATIONS DOWN/UP buttons after pressing the
MEMORY button in step 2. Then press the ENTER button. The
first received station is stored to C5, and next stations to C6,
C7 ... sequentially.
If stations are stored up to E8, the automatic preset tuning is
finished automatically.
When the automatic preset tuning is finished
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedure of the section “To recall a preset
station” on page 9.
To recall a preset station
Simply follow the procedure of the section “To recall a preset
station” on page 9.
<U.K. and Europe models only>
* A recalled station is shown by the frequency or station name
on the display.
Notes
You can replace a preset station by another FM or AM
station manually by simply following the procedure of the
section “To store stations” on page 9.
<General model only>
If the number of received stations is not enough to be stored
up to E8, the search is finished automatically when it
reaches the highest frequency after searching through all
frequencies.
With this function, only FM stations with sufficient signal
strength are stored automatically. If the station you want to
program is week in signal strength, tune to it in monaural
manually and program it by following the procedure of the
section “To store stations” on page 9.
<U.K. and Europe models only>
The automatic preset tuning search will be performed
through all RDS network frequencies until stations are
stored up to E8. If the number of received stations is not
enough to be stored up to E8, the search is finished
automatically after searching through all frequencies.
With this function, only RDS stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune to it in monaural
manually and program it by following the procedure of the
section “To store stations” on page 9.
* There may be a case that this function cannot receive a
station which could be received by the automatic tuning
method. This is because this function receives a large
volume of PI (Program Identification) data along with the
station.
10
AUTOMATIC PRESET TUNING
You can also make use of an automatic preset tuning function for FM stations only. By this function, this unit performs automatic
tuning and stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the
manual preset tuning method on page 9.
<U.K. and Europe models only>
* Only RDS stations can be stored by this function.
To store stations
Press and hold for
about 3 seconds.
Flashes.
FM/AM
MEMORY
MAN’L/
AUTO FM
PRESET
2 3 1
<U.K. and Europe models><General model>
2 3 1
ENTER
KEY MODE
ENTER/
KEY MODE
AUTO
MHz
ST
MEMO
<U.K. and Europe
models>
<General model>
11
English
1 Recall the preset station on E1 (by following the method
of “To recall a preset station” on page 9).
2
3 Next, recall the preset station on A5 by following the
same method with step 1.
4
Shows the exchange of stations is completed.
EXCHANGING PRESET STATIONS
You can exchange the places of two preset stations with each other as shown below.
Example)
If you want to shift the preset station on E1 to A5, and vice
versa.
Flashes
Flashes
ENTER/
KEY MODE
MEMO
<General model only>
<U.K. and Europe
models only
>
2 4
<U.K. and Europe models><General model>
ENTER
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
<General model only>
<U.K. and Europe
models only
>
EDIT
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the POWER switch is set off or the
power plug is disconnected from the AC outlet or the power is
cut due to temporary power failure. If, however, the power is
cut for more than one week, the memory may be erased. If so,
it can be re-programmed by simply following the PRESET
TUNING steps.
2 4
Press and hold for
about 3 seconds.
12
RECEIVING RDS STATIONS
(
U.K. and Europe models only
)
RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many countries. Stations
using this system transmit an inaudible stream of data in addition to the normal radio signal.
RDS data contains various information, such as AF (Alternative Frequencies for the same program station), PI (Program
Identification), PS (Program Service station name), PTY (Program Type name), etc.
RDS function is carried out among the network stations.
* This unit utilizes AF, PI, PS and PTY to receive RDS broadcast stations.
Displaying RDS data
This unit can be turned into the following two modes to display RDS data.
PS (Program Service station name) mode:
Displays the name of the RDS station now being received instead of the frequency.
PTY (Program Type name) mode:
Displays the program type of the RDS station now being received. There are 15 program types to classify RDS stations as follows.
News:
Short accounts of facts, events and publicly
expressed views, reportage and actuality.
Current affairs:
Topical program expanding or enlarging
upon the news, generally in different
presentation style or concept, including
documentary debate, or analysis
Information:
Program whose purpose is to impart advice
in the widest sense, including meteorological
reports and forecasts, consumer affairs,
medical help, etc.
Sport:
Program concerned with any aspect of sport.
Education:
Program intended primarily to educate, of
which the formal element is fundamental.
Drama:
All radio plays and serials.
Culture:
Programs concerned with any aspect of
national or regional culture, including
religious affairs, philosophy, social science,
language, theatre, etc.
Science:
Programs about the natural sciences and
technology.
Varied:
Used for mainly speech-based programs
usually of light-entertainment nature, not
covered by above categories. Examples are:
quizzes, panel games, personality interviews,
comedy and satire.
Pop:
Commercial music, which would generally be
considered to be of current popular appeal,
often featuring in current or recent record
sales charts.
Rock:
Contemporary modern music, usually written
and performed by young musicians.
M.O.R.:
(Middle of the Road Music). Common term to
describe music considered to be “easy-
listening”, as opposed to Pop, Rock or
Classical. Music in this category is often but
not always, vocal, and usually of short
duration (<5 min.)
Light classics:
Classical Musical for general, rather than
specialist appreciation. Examples of music in
this category are instrumental music, and
vocal or choral works.
Serious classics:
Performances of major orchestral works,
symphonies, chamber music etc., and
including Grand Opera.
Other music:
Musical styles not fitting into any of the
above categories. Particularly used for
specialist music, of which Jazz, Rhythm &
Blues, Folk, Country, and Reggae are
examples.
BBC R3
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
MOR M
LIGHT M
CLASSICS
OTHER M
13
English
To turn the unit into the PS mode or PTY mode
Press the FREQ/PS/PTY button. Whenever pressed, the mode changes into the PS mode, PTY mode and returns to usual mode in
turn.
* When an RDS station is received, the display is automatically turned into the PS mode. Do not press the FREQ/PS/PTY button
until the display is turned into the PS mode. If the button is pressed before the display mode is changed, it may occur that “NO
PS” flashes on the display. This is because the unit has not received all of the RDS data on the station yet.
PS mode The name of the station being received is displayed.
If the station is not an RDS station, “NO PS” flashes on the
display and then returns to usual mode.
PTY mode A program type for the station being received is displayed.
If the RDS station does not employ the PTY data service,
“NO PTY” flashes on the display and then returns to the PS
mode.
If the station is not an RDS station, “NO PTY” flashes on the
display and then returns to usual mode.
Usual mode The frequency of the station being received is displayed.
Note
When PS or PTY data reception is not possible due to poor reception conditions, “NO PS” or “NO PTY” flashes on the display in
each mode. In such a case, press the TUNING MODE button so that “AUTO” goes off from the display. Though the reception
mode is changed to monaural by this operation, when you changes to the PS or PTY mode, PS or PTY data may be displayed.
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
14
1
2 Turn the unit into the PS mode.
* If “NO PS” flashes, proceed to the next step while flashing.
If “NO PS” disappears before you proceed to the next step,
press the FREQ/PS/PTY button again.
3
4 Select the first letter or numeral of the station name.
* By pressing the TUNING UP or DOWN button repeatedly or
by pressing and holding either of them, the display will
change letters and numerals in sequence.
* If you will not input the second letter, skip to step 7.
5 When the first letter or numeral of the station name
appears, press the SHIFT/EDIT button to proceed to the
selection of the next letter or numeral.
6 Repeat steps 4 and 5 for other letters and/or numerals,
if necessary.
7 When inputting the name is finished, press the
ENTER/KEY MODE button.
8
The unit begins searching for the station, and it is
continued until the station is found.
You do not have to input a full name for searching
for the station
You may input only the first letter of the station name. If doing
so, you can skip steps 5 and 6. In step 8, the unit searches
for and calls a nearest station which has the letter you input. If
the station is not the desired one, press the TUNING UP or
DOWN button again. The unit will begin searching for another
station which has the same letter.
To cancel this function
Press the AF, FREQ/PS/PTY, SHIFT/EDIT, ENTER/KEY
MODE, FM/AM or MEMORY button.
Note
This function is not useful for calling a station with weak
signals which cannot be received by the automatic tuning
method.
Calling a preset RDS station by the station name (PS SEEK)
You can call a desired RDS station stored in this unit by only inputting the name of the station in the PS mode. By this operation,
this unit searches all preset stations for the station. You do not have to input a full name, even only the first letter can be used for
calling. As many as 8 letters and/or numerals can be selected for inputting a name.
FM/AM
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
A station name is
displayed or “NO PS”
flashes.
“A” will flash on the second
letter or numeral position.
The name is
illuminated.
Flashes
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
ENTER
DOWN UP
PRESET STATIONS
TUNING
DOWN UP
PRESET STATIONS
TUNING
Press once.
2 7
1 4, 8
3, 5
15
English
Calling a preset RDS station by the program type (PTY SEEK)
By designating a program type, the unit automatically searches all preset stations for RDS stations of that program type.
* There are 15 program types to classify RDS stations. For details, refer to page 12.
1 Turn the unit into the PTY mode.
* If “NO PTY” flashes, proceed to the next step while
flashing. If “NO PTY” disappears before you proceed to the
next step, press the FREQ/PS/PTY button once or twice.
2
3 Select the desired program type.
* By pressing the TUNING UP or DOWN button repeatedly or
by pressing and holding either of them, the display will
change program types in sequence.
4 When the desired program type appears, press the
ENTER/KEY MODE button.
5
The unit begins searching all preset stations, and calls a
station of the program type if such a station is found.
* When the TUNING UP button is pressed, the search is
performed from “A1” toward higher numbers of the preset
stations (A1, A2 ... A8, B1, B2, ...). If, however, “A3” is
currently being called for example, the search begins from
the next station “A4”.
When the TUNING DOWN button is pressed, the search
is performed in reverse order.
If the called station is not the desired one, press the
TUNING UP or DOWN button again to search for another
station of the same program type.
To cancel this function
Press the AF, FREQ/PS/PTY, SHIFT/EDIT, ENTER/KEY
MODE, FM/AM or MEMORY button.
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
Press once or twice
until a program type is
displayed or “NO PTY”
flashes.
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
The program type of the station now being
received or “NEWS” flashes on the display.
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
ENTER
Flashes.
DOWN UP
PRESET STATIONS
TUNING
DOWN UP
PRESET STATIONS
TUNING
Press once.
1 4
3, 5
2
1 Tune to a desired RDS station.
* Wait for about 10 seconds before proceeding to the
next step. This allows the unit to search for more
stations.
2
The unit searches for other stations with the same program.
* If the station is not an RDS station, or there is no other
station with the same program, “NO AF” flashes.
Stations with the same program are all stored and
numbered from the best quality station in sequence.
When the search is finished, the best quality station is
called.
3 If desired, you can call the second station by pressing
the AF button.
Whenever the AF button is pressed, stored stations are
called in sequence.
When pressed after the last station is selected, the first one
is restored.
To cancel this function
Press a button other than the AF button.
All of the stored stations will be also cleared.
16
Calling the best quality RDS station which broadcasts the
same program (AF SEEK)
This function automatically searches for and calls another RDS station of the best reception quality which broadcasts the same
program now you are listening to.
This function utilizes AF (Alternative Frequencies for the same program station) and PI (Program Identification) of RDS data service.
The search is carried out among the RDS network stations.
AF
AF
2, 3
17
English
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and
contact your authorized YAMAHA dealer or service center for help.
SYMPTOM
Crackling sounds from time to time
(especially in weak signal areas).
FM stereo reception is noisy.
The “ST” indicator flickers and reception
is noisy.
There is distortion and clear reception
cannot be obtained even with a good FM
antenna.
No stereo effect even with a stereo
broadcast.
A desired station cannot be tuned in with
Automatic tuning.
Previously preset stations can no longer
be tuned in.
Insufficient sensitivity.
A desired station cannot be tuned in with
Automatic tuning.
There are continuous crackling and
hissing noises.
There are buzzing and whining noises
(especially in the evening).
CAUSE
Ignition noise from passing vehicles.
Noise from thermostats or other electrical
equipment.
Because of the characteristics of FM stereo
broadcasts, this is limited to cases where
the transmitter is far away or the antenna
input is poor.
Insufficient antenna input.
Not tuned correctly.
There is multipath interference.
The TUNING MODE button is set to the
manual tuning mode.
The station is too weak.
The tuner has been unplugged for a long
period.
Weak signal or loose antenna connections.
These noises result from lightning,
fluorescent lamps, motors, thermostats and
other electrical equipment.
Another station is interfering with the
received station.
A television set is being used nearby.
REMEDY
The FM antenna should be put up as high
as possible, away from the road, and a
coaxial cable used.
Attach a noise suppressor to the equipment
causing the noise.
Check the antenna connections.
Try using a high quality directional FM
antenna.
Set the TUNING MODE button to the
manual tuning mode.
Use an antenna appropriate for the
reception condition in your area.
Tune again.
Adjust antenna placement to eliminate multi-
path interference.
Set the button properly.
Use the manual tuning mode.
Use a high quality directional FM antenna.
Repeat the presetting procedure.
Tighten the AM loop antenna connections
and rotate it for best reception.
Use the manual tuning mode.
Use an outdoor antenna and a ground wire.
This will help somewhat but it is difficult to
eliminate all noises.
This is impossible to remedy.
Relocate this unit away from the TV.
FM
AM
18
SPECIFICATIONS
FM SECTION
Tuning Range...................................................87.5 to 108 MHz
50 dB Quieting Sensitivity (IHF) [Except Europe model]
75 ohms Mono ........................................1.55 µV (15.1 dBf)
75 ohms Stereo ..........................................21 µV (37.7 dBf)
Usable Sensitivity [Europe model] (DIN)
75 ohms Mono (S/N 26 dB)........................................0.9 µV
75 ohms Stereo (S/N 46 dB)........................................24 µV
Image Response Ratio
[Except Europe model] ................................................45 dB
[Europe model] ............................................................80 dB
IF Response Ratio
[Except Europe model] ................................................70 dB
[Europe model] ............................................................80 dB
Spurious Response Ratio..................................................70 dB
AM Suppression Ratio.......................................................55 dB
Capture Ratio ...................................................................1.5 dB
Alternate Channel Selectivity
[Except Europe model] ................................................85 dB
Selectivity (two signals, 40 kHz Dev., ±300 kHz)
[Europe model only].....................................................70 dB
Signal-to-Noise Ratio
[Except Europe model] (IHF)
Mono..........................................................................80 dB
Stereo........................................................................75 dB
[Europe model] (DIN-Unweighted)
Mono (40 kHz Dev.)...................................................74 dB
Stereo (40 kHz Dev.) ................................................69 dB
Harmonic Distortion (1 kHz)
[Except Europe model]
Mono/Stereo......................................................0.1%/0.2%
[Europe model (40 kHz Dev.)]
Mono/Stereo......................................................0.1%/0.2%
Stereo Separation (1 kHz)
[Except Europe model] ................................................50 dB
[Europe model (40 kHz Dev.)] .....................................50 dB
Frequency Response
30 Hz to 15 kHz....................................................0±0.5 dB
AM SECTION
Tuning Range
[General model] .........................................530 to 1,710 kHz
[U.K. and Europe models]..........................531 to 1,611 kHz
Usable Sensitivity........................................................100 µV/m
Selectivity ..........................................................................32 dB
Signal-to-Noise Ratio.........................................................50 dB
Image Response Ratio......................................................40 dB
Spurious Response Ratio..................................................50 dB
Harmonic Distortion; 400 Hz...............................................0.3%
AUDIO SECTION
Output Level/Impedance (Fixed)
FM (100 % mod. 1 kHz)
[Except Europe model] ........................550 mV/2.2 k-ohms
[Europe model (40 kHz Dev.)] .............400 mV/2.2 k-ohms
AM (30% mod. 400 Hz)..........................150 mV/2.2 k-ohms
GENERAL
Power Supply
[Europe model]..................................................230V, 50 Hz
[U.K. model].......................................................240V, 50 Hz
[General model] ......................110-120/220-240V, 50/60 Hz
Power Consumption
[Except General model] .................................................10W
[General model] ...............................................................7W
Dimensions (W x H x D)............................280 x 82.5 x 360 mm
(11” x 3-1/4” x 14-3/16”)
Weight...........................................................3 kg (6 lbs. 10 oz.)
Accessories.............................................Audio connection cord
AM loop antenna
Indoor FM antenna
* Specifications subject to change without notice.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-2084 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. 17 RUE DES CAMPANULES, LOGNES 77321 MARNE LA VALLEE CEDEX 2, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Transcripción de documentos

TX-10 Natural Sound AM/FM Stereo Tuner Syntonisateur AM/FM stéréo de la série “Natural Sound” “Natural Sound” MW/UKW-Stereo-Tuner Natural Sound AM/FM stereotuner Sintonizzatore stereo AM/FM a suono naturale Sintonizador estéreo de AM/FM de sonido natural Natural Sound Stereo Tuner OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTE ZUBEHÖRTEILE MEDFÖLJANDE TILLBEHÖR ACCESSORI IN DOTAZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE ACCESSOIRES ● ● ● ● ● ● ● ● ● ● ● ● ● ● 2 Indoor FM Antenna Antenne FM intérieure UKW-Innenantenne FM inomhusantenn Antenna FM per interni Antena FM interior FM Binnenantenne Audio connection cord Câble de connexion audio Audio-Anschlußkabel Audio anslutningssladdar Cavo di collegamento audio Cable de conexión de audio Audio aansluitkabel ● ● ● ● ● ● ● After unpacking, check that the following parts are contained. Après le déballage, vérifier que les pièces suivantes sont incluses. Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind. Kontrollera efter det apparaten packats upp att följande delar finns med. Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio. Desembale el aparato y verificar que los siguientes accesorios están en la caja. Controleer na het uitpakken of de volgende onderdelen voorhanden zijn. ● ● ● ● ● ● ● AM Loop Antenna Cadre-antenna AM MW-Rahmenantenne AM ramantenn Antenna AM ad anello Antena de cuadro de AM AM Lusantenne FEATURES CONTENTS • • • • • • Supplied Accessories......................................................2 Caution............................................................................3 Connections ....................................................................4 Tuning Operations ..........................................................7 Preset Tuning..................................................................9 Receiving RDS Stations (U.K. and Europe models only) ......................................................................................12 Troubleshooting ............................................................17 Specifications................................................................18 40 Station Random Access Preset Tuning Automatic Preset Tuning Multi-Status Station Memory Direct PLL Synthesizer Tuning Preset Station Shifting Capability Multi-Functions for RDS Broadcast Reception (U.K. and Europe models only) English Thank you for selecting this YAMAHA stereo tuner CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1. This unit is a sophisticated stereo tuner. To assure proper operation and the best possible performance, please read this manual carefully. 2. Choose the installation location for the unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibration and excessive dust, heat, cold or moisture. Keep it away from such sources of hum as transformers or motors. 3. Do not open the cabinet, because this may result in damage to the unit or electrical shock. If a foreign object should get into the unit, contact your local dealer. 4. When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet. 5. To prevent lightning damage, disconnect the AC power plug and disconnect the antenna cable when there is an electrical storm. 6. When disconnecting the power plug from the wall outlet, always pull directly on the plug; never pull the cord itself. 7. Do not use force when operating switches and other IMPORTANT Please record the serial number of this unit in the space below. Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION (FOR CANADA MODEL) TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT. FOR CANADIAN CUSTOMER THIS DIGITAL APPARATUS DOES NOT EXCEED THE “CLASS B” LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATION OF THE CANADIAN DEPARTMENT OF COMMUNICATIONS. controls. 8. When moving the unit, be sure to first disconnect the power plug and disconnect all wires connected from the unit to other equipment. 9. Do not attempt to clean this unit with chemical solvents, because this may damage the finish. Use a clean, dry cloth. 10. Be sure to read the “TROUBLESHOOTING” section of this manual for advice on common operating errors before concluding that the unit is faulty. 11. Keep this manual in a safe place for future reference. 12. Voltage Selector (General Model only) The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110-120/220-240V AC, 50/60 Hz. FREQUENCY STEP switch (General Model only) Because the interstation frequency spacing differs in different areas, set the FREQUENCY STEP switch (located at the rear) according to the frequency spacing in your area. Before setting this switch, disconnect the AC power plug of this unit from the AC outlet. The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off. For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. Special Instructions for U.K. Model IMPORTANT THE WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE The colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug. Proceed as follows: the wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. 3 CONNECTIONS ANTENNA CONNECTIONS ● ● Each antenna should be connected to the designated terminals correctly, referring to the following figure. Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may result in improvement. Outdoor FM antenna Outdoor AM antenna Indoor FM antenna (included) FM ANT AM loop antenna (included) GND AM ANT 75Ω UNBAL. 75-ohm antenna adapter 300-ohm flat ribbon cable 75-ohm coaxial cable 4 75-ohm/300-ohm antenna adapter Ground English Connecting the indoor FM antenna *If you connect an outdoor FM antenna to this unit, do not connect the indoor FM antenna to this unit. Connecting the AM loop antenna ➁ Orient so that the best reception is obtained. ➂ ➀ * The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall. * The AM loop antenna should be kept connected, even if an outdoor AM antenna is connected to this unit. m Optional outdoor FM antenna Consult with your dealer or authorized service center about the best method of selecting and erecting an outdoor FM antenna. The choice of the feeder cable is also important. Flat ribbonshaped twin-lead cable performs well electrically, and is cheaper and somewhat easier to handle when routing it through windows and around rooms. Coaxial cable is more expensive, does a much better job of minimizing interference, is less prone to the effects of weather and close-by metal objects, and is nearly as good a signal conductor as feeder cable, particularly for foam-type coaxial cables. Coaxial cable is somewhat more difficult to install at the point where the cable enters the building. If coaxial cable is selected, make sure the antenna is designed to be used with that type of cable. 300-ohm feeder cable 75-ohm coaxial cable * Use a 75-ohm/300-ohm antenna adapter (not included) or a 75-ohm antenna adapter (not included) for connections. 300-ohm feeder cable 75-ohm coaxial cable 75-ohm/300-ohm antenna adapter 75-ohm coaxial cable 75-ohm antenna adapter Notes for FM antenna installation ● To minimize automobile ignition noise, locate the antenna as far from heavy traffic as possible. ● Keep the feeder cable or coaxial cable as short as possible. Do not bundle or roll up excess cable. ● The antenna should be at least two meters (6.6 feet) from reinforced concrete walls or metal structures. 5 m Optional outdoor AM antenna GND terminal For maximum safety and minimum interference, connect the GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth. In steel buildings or at a great distance from the transmitter, it may be necessary to install an outside long wire antenna. CONNECTIONS TO THE AMPLIFIER ● Before making any connections, switch OFF the power to this unit and the amplifier or other component. ● Be sure that the connections from the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) input terminals of the amplifier or other component. * When connecting with the YAMAHA amplifier AX-10, connect this unit’s LINE OUT terminals to the TUNER terminals (numbered 2) on the rear of AX-10. Amplifier R L 2 TUNER Connection cord (included) This unit FM ANT GND AM ANT LINE OUT 2 75Ω UNBAL. L R To AC outlet * This unit has a remote control sensor. It receives signals from the remote control transmitter provided with a YAMAHA amplifier. Remote control sensor 6 Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING). English TUNING OPERATIONS AUTOMATIC TUNING <U.K. and Europe models> 1 3 1 4 <General model> 2 5, 6 1 5 STANDBY/ON 3 4 2 5, 6 Tune to a desired station. PRESET STATIONS DOWN 2 Select the reception band while watching the display. TUNING FM/AM To tune to a higher frequency, press the UP button once. To tune to a lower frequency, press the DOWN button once. or 3 6 TUNING MODE AUTO AUTO/ MAN’L MONO 4 UP If the station where tuning search stopped is not the desired one, press again. PRESET STATIONS DOWN UP If “PRESET” is being illuminated on the display, press the KEY MODE button to turn it off. TUNING <U.K. and Europe models> ENTER/ KEY MODE * If the tuning search does not stop at the desired station (because the signals of the station are weak), change to the MANUAL TUNING method as described on the following page. PRESET <General model> KEY MODE To turn off the power Press the POWER switch again. ENTER 7 MANUAL TUNING <U.K. and Europe models> 2 1 2 <General model> 3 4 Follow steps 1 and 2 on the previous page. 2 3 4 4 Tune to a desired station manually. PRESET STATIONS DOWN TUNING MODE UP “AUTO” goes off. AUTO/ MAN’L MONO TUNING 3 * To continue tuning search, press and hold the button. If “PRESET” is being illuminated on the display, press the KEY MODE button to turn it off. <U.K. and Europe models> Note If you tune to an FM station manually, it is received in monaural mode automatically to increase the signal quality. ENTER/ KEY MODE PRESET <General model> KEY MODE ENTER ➀ Display information 1 AUTO ST MHz 2 3 8 ➁ ➂ Displays the band and frequency of the received station. * <U.K. and Europe models only> If an RDS station is received, the frequency is then replaced by the station name. (However, if the PS data cannot be received within 5 seconds, “NO PS” flashes, and then it returns to the frequency display.) Refer to page 13 for details. Illuminates when an FM stereo broadcast is received in stereo. Indicates the signal level of the received station. English PRESET TUNING MANUAL PRESET TUNING This unit can store station frequencies selected by tuning operation. With this function, you can recall any desired station by only selecting the preset station number where it is stored. Up to 40 stations (8 stations x 5 pages) can be stored. <U.K. and Europe models> 2, 5 <General model> 2 3, 1 4, 3 To store stations 1 2 2, 5 2 3, 1 4, 3 To recall a preset station Tune to a desired station. (Refer to the previous page for tuning procedures.) 1 Select the page where the preset station is stored. A/B/C/D/E PRESET MEMORY MEMO MAN’L/ AUTO FM 3 Flashes on and off for about 5 seconds. 2 If “PRESET” is not being illuminated on the display, any preset station cannot be recalled. If so, press the KEY MODE button to turn it on. <U.K. and Europe models> Select a desired page (A – E) of preset stations while watching the display before “MEMO” goes off from the display. A/B/C/D/E PRESET ENTER/ KEY MODE PRESET <General model> KEY MODE 4 Select a preset station number (1–8) while watching the display before “MEMO” goes off from the display. ENTER PRESET STATIONS DOWN UP 3 PRESET STATIONS DOWN UP TUNING 5 TUNING MEMORY PRESET AUTO ST Select the preset station number. MHz MAN’L/ AUTO FM Shows the displayed station has been programmed to A1. * In the same way, program other stations to A2, A3 ... A8. * You can program more stations on other pages in the same way by selecting other pages in step 3. Notes ● A new setting can be programmed in place of the former one. ● For presets, the setting of the reception mode (stereo or monaural) is stored along with the station frequency. 9 AUTOMATIC PRESET TUNING You can also make use of an automatic preset tuning function for FM stations only. By this function, this unit performs automatic tuning and stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on page 9. <U.K. and Europe models only> * Only RDS stations can be stored by this function. <U.K. and Europe models> 2 <General model> 3 1 2 3 1 To store stations 1 When the automatic preset tuning is finished FM/AM The display shows the frequency of the last preset station. Check the contents and the number of preset stations by following the procedure of the section “To recall a preset station” on page 9. To recall a preset station 2 MEMORY AUTO ST PRESET MHz MAN’L/ AUTO FM Press and hold for about 3 seconds. 3 MEMO Flashes. <U.K. and Europe <General model> models> KEY MODE ENTER/ KEY MODE ENTER The automatic preset tuning begins from the frequency currently displayed. Received stations are programmed to A1, A2 ... A8 sequentially. * If more than 8 stations are received, they are also programmed to the preset station numbers on other pages (B, C, D and E) in that order. If you want to store the first station received by the automatic preset tuning to a desired preset station number. If, for example, you want to store the first received station to C5, select “C5” by using the A/B/C/D/E button and the PRESET STATIONS DOWN/UP buttons after pressing the MEMORY button in step 2. Then press the ENTER button. The first received station is stored to C5, and next stations to C6, C7 ... sequentially. If stations are stored up to E8, the automatic preset tuning is finished automatically. 10 Simply follow the procedure of the section “To recall a preset station” on page 9. <U.K. and Europe models only> * A recalled station is shown by the frequency or station name on the display. Notes ● You can replace a preset station by another FM or AM station manually by simply following the procedure of the section “To store stations” on page 9. <General model only> ● If the number of received stations is not enough to be stored up to E8, the search is finished automatically when it reaches the highest frequency after searching through all frequencies. ● With this function, only FM stations with sufficient signal strength are stored automatically. If the station you want to program is week in signal strength, tune to it in monaural manually and program it by following the procedure of the section “To store stations” on page 9. <U.K. and Europe models only> ● The automatic preset tuning search will be performed through all RDS network frequencies until stations are stored up to E8. If the number of received stations is not enough to be stored up to E8, the search is finished automatically after searching through all frequencies. ● With this function, only RDS stations with sufficient signal strength are stored automatically. If the station you want to program is weak in signal strength, tune to it in monaural manually and program it by following the procedure of the section “To store stations” on page 9. * There may be a case that this function cannot receive a station which could be received by the automatic tuning method. This is because this function receives a large volume of PI (Program Identification) data along with the station. English EXCHANGING PRESET STATIONS You can exchange the places of two preset stations with each other as shown below. <U.K. and Europe models> <General model> 24 24 Example) If you want to shift the preset station on E1 to A5, and vice versa. 1 Recall the preset station on E1 (by following the method of “To recall a preset station” on page 9). 2 <U.K. and Europe models only> 4 <U.K. and Europe models only> <General model only> KEY MODE <General model only> EDIT ENTER/ KEY MODE ENTER PS/PTY/SEEK SHIFT/ EDIT Press and hold for about 3 seconds. MEMO Shows the exchange of stations is completed. Flashes 3 Next, recall the preset station on A5 by following the same method with step 1. Flashes Memory back-up The memory back-up circuit prevents the programmed data from being lost even if the POWER switch is set off or the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than one week, the memory may be erased. If so, it can be re-programmed by simply following the PRESET TUNING steps. 11 RECEIVING RDS STATIONS (U.K. and Europe models only) RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal. RDS data contains various information, such as AF (Alternative Frequencies for the same program station), PI (Program Identification), PS (Program Service station name), PTY (Program Type name), etc. RDS function is carried out among the network stations. * This unit utilizes AF, PI, PS and PTY to receive RDS broadcast stations. Displaying RDS data This unit can be turned into the following two modes to display RDS data. PS (Program Service station name) mode: Displays the name of the RDS station now being received instead of the frequency. BBC R3 PTY (Program Type name) mode: Displays the program type of the RDS station now being received. There are 15 program types to classify RDS stations as follows. NEWS AFFAIRS INFO SPORT EDUCATE DRAMA News: Short accounts of facts, events and publicly expressed views, reportage and actuality. Current affairs: Topical program expanding or enlarging upon the news, generally in different presentation style or concept, including documentary debate, or analysis Information: Program whose purpose is to impart advice in the widest sense, including meteorological reports and forecasts, consumer affairs, medical help, etc. VARIED POP M ROCK M Sport: Program concerned with any aspect of sport. MOR M Education: Program intended primarily to educate, of which the formal element is fundamental. Varied: Used for mainly speech-based programs usually of light-entertainment nature, not covered by above categories. Examples are: quizzes, panel games, personality interviews, comedy and satire. Pop: Commercial music, which would generally be considered to be of current popular appeal, often featuring in current or recent record sales charts. Rock: Contemporary modern music, usually written and performed by young musicians. M.O.R.: (Middle of the Road Music). Common term to describe music considered to be “easylistening”, as opposed to Pop, Rock or Classical. Music in this category is often but not always, vocal, and usually of short duration (<5 min.) Light classics: Classical Musical for general, rather than specialist appreciation. Examples of music in this category are instrumental music, and vocal or choral works. Drama: All radio plays and serials. LIGHT M Culture: Programs concerned with any aspect of national or regional culture, including religious affairs, philosophy, social science, language, theatre, etc. of major orchestral works, CLASSICS Performances symphonies, chamber music etc., and Serious classics: CULTURE SCIENCE 12 Science: Programs about the natural sciences and technology. including Grand Opera. OTHER M Other music: Musical styles not fitting into any of the above categories. Particularly used for specialist music, of which Jazz, Rhythm & Blues, Folk, Country, and Reggae are examples. English To turn the unit into the PS mode or PTY mode Press the FREQ/PS/PTY button. Whenever pressed, the mode changes into the PS mode, PTY mode and returns to usual mode in turn. * When an RDS station is received, the display is automatically turned into the PS mode. Do not press the FREQ/PS/PTY button until the display is turned into the PS mode. If the button is pressed before the display mode is changed, it may occur that “NO PS” flashes on the display. This is because the unit has not received all of the RDS data on the station yet. PS mode The name of the station being received is displayed. If the station is not an RDS station, “NO PS” flashes on the display and then returns to usual mode. PTY mode A program type for the station being received is displayed. If the RDS station does not employ the PTY data service, “NO PTY” flashes on the display and then returns to the PS mode. If the station is not an RDS station, “NO PTY” flashes on the display and then returns to usual mode. Usual mode The frequency of the station being received is displayed. PS/PTY/SEEK FREQ/PS/PTY SHIFT/ EDIT ENTER/ KEY MODE Note When PS or PTY data reception is not possible due to poor reception conditions, “NO PS” or “NO PTY” flashes on the display in each mode. In such a case, press the TUNING MODE button so that “AUTO” goes off from the display. Though the reception mode is changed to monaural by this operation, when you changes to the PS or PTY mode, PS or PTY data may be displayed. 13 Calling a preset RDS station by the station name (PS SEEK) You can call a desired RDS station stored in this unit by only inputting the name of the station in the PS mode. By this operation, this unit searches all preset stations for the station. You do not have to input a full name, even only the first letter can be used for calling. As many as 8 letters and/or numerals can be selected for inputting a name. 1 2 7 4, 8 3, 5 FM/AM 1 2 6 7 Turn the unit into the PS mode. SHIFT/ EDIT ENTER/ KEY MODE A station name is displayed or “NO PS” flashes. * If “NO PS” flashes, proceed to the next step while flashing. If “NO PS” disappears before you proceed to the next step, press the FREQ/PS/PTY button again. 3 When inputting the name is finished, press the ENTER/KEY MODE button. PS/PTY/SEEK PS/PTY/SEEK FREQ/PS/PTY Repeat steps 4 and 5 for other letters and/or numerals, if necessary. FREQ/PS/PTY 8 SHIFT/ EDIT ENTER ENTER/ KEY MODE The name is illuminated. PRESET STATIONS DOWN UP Press once. PS/PTY/SEEK TUNING FREQ/PS/PTY SHIFT/ EDIT ENTER/ KEY MODE Flashes 4 Select the first letter or numeral of the station name. PRESET STATIONS DOWN UP * By pressing the TUNING UP or DOWN button repeatedly or by pressing and holding either of them, the display will change letters and numerals in sequence. * If you will not input the second letter, skip to step 7. When the first letter or numeral of the station name appears, press the SHIFT/EDIT button to proceed to the selection of the next letter or numeral. PS/PTY/SEEK FREQ/PS/PTY 14 SHIFT/ EDIT You do not have to input a full name for searching for the station You may input only the first letter of the station name. If doing so, you can skip steps 5 and 6. In step 8, the unit searches for and calls a nearest station which has the letter you input. If the station is not the desired one, press the TUNING UP or DOWN button again. The unit will begin searching for another station which has the same letter. TUNING 5 The unit begins searching for the station, and it is continued until the station is found. ENTER/ KEY MODE “A” will flash on the second letter or numeral position. To cancel this function Press the AF, FREQ/PS/PTY, SHIFT/EDIT, ENTER/KEY MODE, FM/AM or MEMORY button. Note This function is not useful for calling a station with weak signals which cannot be received by the automatic tuning method. English Calling a preset RDS station by the program type (PTY SEEK) By designating a program type, the unit automatically searches all preset stations for RDS stations of that program type. * There are 15 program types to classify RDS stations. For details, refer to page 12. 3, 5 1 4 2 1 Turn the unit into the PTY mode. PS/PTY/SEEK FREQ/PS/PTY SHIFT/ EDIT Press once or twice until a program type is displayed or “NO PTY” flashes. ENTER/ KEY MODE 4 When the desired program type appears, press the ENTER/KEY MODE button. PS/PTY/SEEK FREQ/PS/PTY SHIFT/ EDIT ENTER ENTER/ KEY MODE Flashes. * If “NO PTY” flashes, proceed to the next step while flashing. If “NO PTY” disappears before you proceed to the next step, press the FREQ/PS/PTY button once or twice. 2 5 PRESET STATIONS DOWN UP Press once. PS/PTY/SEEK TUNING FREQ/PS/PTY SHIFT/ EDIT ENTER/ KEY MODE The program type of the station now being received or “NEWS” flashes on the display. 3 Select the desired program type. PRESET STATIONS DOWN UP TUNING * By pressing the TUNING UP or DOWN button repeatedly or by pressing and holding either of them, the display will change program types in sequence. The unit begins searching all preset stations, and calls a station of the program type if such a station is found. * When the TUNING UP button is pressed, the search is performed from “A1” toward higher numbers of the preset stations (A1, A2 ... A8, B1, B2, ...). If, however, “A3” is currently being called for example, the search begins from the next station “A4”. When the TUNING DOWN button is pressed, the search is performed in reverse order. If the called station is not the desired one, press the TUNING UP or DOWN button again to search for another station of the same program type. To cancel this function Press the AF, FREQ/PS/PTY, SHIFT/EDIT, ENTER/KEY MODE, FM/AM or MEMORY button. 15 Calling the best quality RDS station which broadcasts the same program (AF SEEK) This function automatically searches for and calls another RDS station of the best reception quality which broadcasts the same program now you are listening to. This function utilizes AF (Alternative Frequencies for the same program station) and PI (Program Identification) of RDS data service. The search is carried out among the RDS network stations. 2, 3 1 2 Tune to a desired RDS station. * Wait for about 10 seconds before proceeding to the next step. This allows the unit to search for more stations. If desired, you can call the second station by pressing the AF button. AF AF The unit searches for other stations with the same program. * If the station is not an RDS station, or there is no other station with the same program, “NO AF” flashes. Stations with the same program are all stored and numbered from the best quality station in sequence. When the search is finished, the best quality station is called. 16 3 Whenever the AF button is pressed, stored stations are called in sequence. When pressed after the last station is selected, the first one is restored. To cancel this function Press a button other than the AF button. All of the stored stations will be also cleared. If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM FM Crackling sounds from time to time (especially in weak signal areas). CAUSE AM REMEDY Ignition noise from passing vehicles. The FM antenna should be put up as high as possible, away from the road, and a coaxial cable used. Noise from thermostats or other electrical equipment. Attach a noise suppressor to the equipment causing the noise. FM stereo reception is noisy. Because of the characteristics of FM stereo broadcasts, this is limited to cases where the transmitter is far away or the antenna input is poor. Check the antenna connections. Try using a high quality directional FM antenna. Set the TUNING MODE button to the manual tuning mode. The “ST” indicator flickers and reception is noisy. Insufficient antenna input. Use an antenna appropriate for the reception condition in your area. Not tuned correctly. Tune again. There is distortion and clear reception cannot be obtained even with a good FM antenna. There is multipath interference. Adjust antenna placement to eliminate multipath interference. No stereo effect even with a stereo broadcast. The TUNING MODE button is set to the manual tuning mode. Set the button properly. A desired station cannot be tuned in with Automatic tuning. The station is too weak. Use the manual tuning mode. Use a high quality directional FM antenna. Previously preset stations can no longer be tuned in. The tuner has been unplugged for a long period. Repeat the presetting procedure. Insufficient sensitivity. Weak signal or loose antenna connections. Tighten the AM loop antenna connections and rotate it for best reception. A desired station cannot be tuned in with Automatic tuning. English TROUBLESHOOTING Use the manual tuning mode. There are continuous crackling and hissing noises. These noises result from lightning, fluorescent lamps, motors, thermostats and other electrical equipment. Use an outdoor antenna and a ground wire. This will help somewhat but it is difficult to eliminate all noises. There are buzzing and whining noises (especially in the evening). Another station is interfering with the received station. This is impossible to remedy. A television set is being used nearby. Relocate this unit away from the TV. 17 SPECIFICATIONS FM SECTION AM SECTION Tuning Range ...................................................87.5 to 108 MHz Tuning Range [General model] .........................................530 to 1,710 kHz [U.K. and Europe models]..........................531 to 1,611 kHz 50 dB Quieting Sensitivity (IHF) [Except Europe model] 75 ohms Mono ........................................1.55 µV (15.1 dBf) 75 ohms Stereo ..........................................21 µV (37.7 dBf) Usable Sensitivity ........................................................100 µV/m Usable Sensitivity [Europe model] (DIN) 75 ohms Mono (S/N 26 dB) ........................................0.9 µV 75 ohms Stereo (S/N 46 dB)........................................24 µV Selectivity ..........................................................................32 dB Image Response Ratio [Except Europe model] ................................................45 dB [Europe model] ............................................................80 dB Image Response Ratio ......................................................40 dB IF Response Ratio [Except Europe model] ................................................70 dB [Europe model] ............................................................80 dB Harmonic Distortion; 400 Hz...............................................0.3% Spurious Response Ratio..................................................70 dB Output Level/Impedance (Fixed) FM (100 % mod. 1 kHz) [Except Europe model] ........................550 mV/2.2 k-ohms [Europe model (40 kHz Dev.)] .............400 mV/2.2 k-ohms AM (30% mod. 400 Hz)..........................150 mV/2.2 k-ohms AM Suppression Ratio.......................................................55 dB Capture Ratio ...................................................................1.5 dB Alternate Channel Selectivity [Except Europe model] ................................................85 dB Selectivity (two signals, 40 kHz Dev., ±300 kHz) [Europe model only].....................................................70 dB Signal-to-Noise Ratio [Except Europe model] (IHF) Mono..........................................................................80 dB Stereo ........................................................................75 dB [Europe model] (DIN-Unweighted) Mono (40 kHz Dev.)...................................................74 dB Stereo (40 kHz Dev.) ................................................69 dB Harmonic Distortion (1 kHz) [Except Europe model] Mono/Stereo ......................................................0.1%/0.2% [Europe model (40 kHz Dev.)] Mono/Stereo ......................................................0.1%/0.2% Stereo Separation (1 kHz) [Except Europe model] ................................................50 dB [Europe model (40 kHz Dev.)] .....................................50 dB Frequency Response 30 Hz to 15 kHz....................................................0±0.5 dB 18 Signal-to-Noise Ratio.........................................................50 dB Spurious Response Ratio..................................................50 dB AUDIO SECTION GENERAL Power Supply [Europe model] ..................................................230V, 50 Hz [U.K. model].......................................................240V, 50 Hz [General model] ......................110-120/220-240V, 50/60 Hz Power Consumption [Except General model] .................................................10W [General model] ...............................................................7W Dimensions (W x H x D) ............................280 x 82.5 x 360 mm (11” x 3-1/4” x 14-3/16”) Weight ...........................................................3 kg (6 lbs. 10 oz.) Accessories .............................................Audio connection cord AM loop antenna Indoor FM antenna * Specifications subject to change without notice. YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-2084 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. 17 RUE DES CAMPANULES, LOGNES 77321 MARNE LA VALLEE CEDEX 2, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Yamaha TX-10RDS Manual de usuario

Tipo
Manual de usuario
Este manual también es adecuado para