CP88/73 Supplementary Manual 3
Additional new parameters for controllers
[SETTINGS] → Selecting the Controllers with encoder dial → [ENTER]
The menus under the Controllers have been changed to Bend Range, Modulation Lever, Foot Controller 1, Foot Controller 2
and Receive SW, and parameters have been added.
Controllers
Function name Description
Bend Range
Piano
Determines the maximum Pitch Bend Range in semitones for each
Voice section.
Settings: -24 – +0 – +24
Default: +2
E.Piano
Sub
Modulation Lever
Assign
MIDI control change numbers generated by operating the Modulation
Lever.
Default: 1 (Modulation)
NOTE
You can now assign the USB Audio Volume to the Modulation Lever by
Selecting 118 (USB Audio Volume).
Limit Low
Determines the upper and lower limits for the control change values
generated by operating the modulation lever.
Limit High
P.Mod Depth Piano
Determines the depth of vibrato effect on keyboard sound. This can be
set individually for each Voice section.
Settings: 0 – 127
Piano/E.Piano default: 0
Sub default: 10
NOTE
Since the vibrato effect is disabled when a “Rotary” effect of the Sub
section is selected, this setting will also be disabled.
E.Piano
Sub
P.Mod Speed Piano
Determines the speed of the vibrato effect on the keyboard sound, and
can be set individually for each Voice section.
Settings: -64 – +63
Default: 0
NOTE
Since the vibrato effect is disabled when a “Rotary” effect of the Sub
section is selected, this setting will also be disabled.
Sub