Panasonic KXHN6003 Instrucciones de operación

Marca: Panasonic

Modelo: KXHN6003

Tipo: Instrucciones de operación

Este manual también es adecuado para

El Panasonic KXHN6003 es un avanzado dispositivo de seguridad para el hogar que ofrece tranquilidad. Sus principales características incluyen notificaciones instantáneas de apertura y cierre de puertas y ventanas en su teléfono inteligente a través de la aplicación Home Network, modo silencioso, configuraciones de temporizador, historial de eventos y uso compartido de dispositivos con amigos y familiares. Con su tecnología de detección confiable y su fácil configuración e instalación, el KXHN6003 es la elección perfecta para proteger su hogar y mantener su tranquilidad.

Installation Guide

Home Network System

Window/Door Sensor

Model No. KX-HNS101

Thank you for purchasing a Panasonic product.

This document explains how to install the window/door sensor

properly.

For details about how to use the system, refer to the User’s Guide

(page 17).

Please read this document before using the unit and save it for future

reference.

For assistance, visit our Web site: www.panasonic.com/support

for customers in the U.S.A. or Puerto Rico.

Please register your product: www.panasonic.com/prodreg

Printed in China

Introduction
Accessory information ...............3
Important Information
About this system ......................4
For your safety ...........................4
Important safety instructions ......5
For best performance ................5
Other information .......................6
Setup
Part names and functions ..........8
About the LED indicator .............8
Setup overview ..........................8
Inserting the battery ...................9
Registering the window/door
sensor ........................................9
Changing the sensor type ........10
Wireless communication
range .......................................10
Temporary placement ..............11
Installation ...............................14
Appendix
Testing the window/door
sensor ......................................17
Features available when using the
[Home Network] app ................17
Accessing the User’s Guide ....17
Specifications ..........................18
FCC and other information ......19
Customer services ...................21
Warranty (For United States and
Puerto Rico) .............................22
2
Table of Contents

Accessory information

Supplied accessories

No. Accessory item/Part number Quantity

Battery

Mounting screws (20 mm (25/32 inches))

/XMM38+20VW

Mounting double-sided tapes

*1 When replacing the battery, see “Power source” of “Specifications”, page 18

for battery information.

*2 2 screws for the sensor unit and 2 screws for the magnet unit

*3 2 pieces of tape for the sensor unit: PNHS1620Z

1 piece of tape for the magnet unit: PNHS1621Z

A B C

Other information

R Design and specifications are subject to change without notice.

R The illustrations in these instructions may vary slightly from the actual product.

Trademarks

R iPhone and iPad are registered trademarks of Apple Inc.

R Android™ is a trademark of Google Inc.

For assistance, please visit www.panasonic.com/support

Introduction

About this system

This system is an auxiliary system; it is

not designed to provide complete

protection from property loss.

Panasonic will not be held responsible

in the event that property loss occurs

while this system is in operation.

For your safety

To prevent severe injury and loss of life/

property, read this section carefully

before using the product to ensure

proper and safe operation of your

product.

WARNING

Power connection

R Use only the power source marked

on the product.

R Do not connect non-specified

devices.

Installation

R To prevent the risk of fire or

electrical shock, do not expose the

product to rain or any type of

moisture.

R Do not place or use this product

near automatically controlled

devices such as automatic doors

and fire alarms. Radio waves

emitted from this product may cause

such devices to malfunction

resulting in an accident.

R Keep small parts (magnet unit,

magnet unit cover, screws, etc.) out

of the reach of children. There is a

risk of swallowing. In the event they

are swallowed, seek medical advice

immediately.

Operating safeguards

R Do not disassemble the product.

Medical

R Consult the manufacturer of any

personal medical devices, such as

pacemakers or hearing aids, to

determine if they are adequately

shielded from external RF (radio

frequency) energy. DECT features

operate between 1.92 GHz and

1.93 GHz with a peak transmission

power of 115 mW.

R Do not use the product in health

care facilities if any regulations

posted in the area instruct you not to

do so. Hospitals or health care

facilities may be using equipment

that could be sensitive to external

RF energy.

CR Lithium battery

R Do not recharge, disassemble,

remodel, heat or throw it into fire.

R Do not touch the terminals and

with metal objects.

R Risk of explosion if battery is

replaced by an incorrect type.

Dispose of used battery according to

local regulations.

R If any electrolyte should come into

contact with your hands or clothes,

wash it off thoroughly with water.

R If any electrolyte should come into

contact with your eyes, never rub

your eyes. Rinse your eyes

thoroughly with water, and then

consult a doctor.

For assistance, please visit www.panasonic.com/support

Important Information

CAUTION

General information

R Do not place magnetic cards or

similar objects near the sensor unit

and magnet unit. Magnetic data on

the cards, etc. may be deleted.

CR Lithium battery

R Use only the battery noted on

page 3.

R Insert the battery correctly.

R Do not leave the battery in an

automobile exposed to direct

sunlight for a long period of time with

the doors and windows closed.

R Remove the battery if you do not

use the product for a long period of

time. Keep it in a cool, dark area.

R Do not replace a battery with wet

hands.

R Keep out of the reach of small

children. There is a risk of

swallowing. If the battery is

swallowed, seek medical attention

immediately.

R Remove the battery if it becomes

unusable. There is a risk of leakage,

overheating, and rupture. Do not

attempt to use a battery if it is

leaking.

R Exercise care when handling the

batteries. Do not allow conductive

materials such as rings, bracelets, or

keys to touch the batteries,

otherwise a short circuit may cause

the batteries and/or the conductive

material to overheat and cause

burns.

Important safety

instructions

When using your product, basic safety

precautions should always be followed

to reduce the risk of fire, electric shock,

and injury to persons, including the

following:

1. Do not use this product near water

for example, near a bathtub,

washbowl, kitchen sink, or laundry

tub, in a wet basement or near a

swimming pool.

2. Use only the batteries indicated in

this document. Do not dispose of

batteries in a fire. They may

explode. Check with local codes for

possible special disposal

instructions.

SAVE THESE INSTRUCTIONS

For best performance

Hub location/avoiding noise

The hub and other compatible

Panasonic devices use radio waves to

communicate with each other.

R For maximum coverage and

noise-free communications, place

your hub:

– at a convenient, high, and central

location with no obstructions

between the product and hub in

an indoor environment.

– away from electronic appliances

such as TVs, radios, personal

computers, wireless devices, or

other phones.

– facing away from radio frequency

transmitters, such as external

For assistance, please visit www.panasonic.com/support

Important Information

antennas of mobile phone cell

stations. (Avoid putting the hub

on a bay window or near a

window.)

R If the reception for a hub location is

not satisfactory, move the hub to

another location for better reception.

Environment

R Keep the product away from

electrical noise generating devices,

such as fluorescent lamps and

motors.

R The product should be kept free

from excessive smoke, dust, high

temperature, and vibration.

R The product should not be exposed

to direct sunlight.

R Do not place heavy objects on top of

the product.

R The product should be kept away

from heat sources such as heaters,

kitchen stoves, etc. It should not be

placed in rooms where the

temperature is less than -10 °C

(14 °F) or greater than 40 °C

(104 °F). Damp basements should

also be avoided.

R Operating the product near electrical

appliances may cause interference.

Move away from the electrical

appliances.

Other information

CAUTION: Risk of explosion if battery

is replaced by an incorrect type.

Dispose of used batteries according to

the instructions.

Routine care

R Wipe the outer surface of the

product with a soft moist cloth.

R Do not use benzine, thinner, or any

abrasive powder.

Information on Disposal in other

Countries outside the European

Union

These symbols (A, B, C) are only

valid in the European Union. If you

wish to discard these items, please

contact your local authorities or dealer

and ask for the correct method of

disposal.

For assistance, please visit www.panasonic.com/support

Important Information

Notice

For assistance, please visit www.panasonic.com/support

Important Information

Part names and

functions

n Sensor unit

n Magnet unit

Sensor unit cover

M N

Used to confirm the status of the

sensor or register the sensor to

the hub.

LED indicator

Magnet unit cover

About the LED

indicator

You can press M N and check the

LED indicator to confirm the sensor’s

status.

Indicator Status

Green, lit Window/door is closed

Red, lit Window/door is open

Indicator Status

Red,

blinking

Sensor is out of range

of the hub

Green,

blinking

Registration mode

(You pressed and held

M N)

Off No battery power

Note:

R The LED indicator does not indicate

sensor status if the sensor has not

been registered (page 9).

Setup overview

1 Initial setup

Make sure you can access the

system using your mobile device.

For details, refer to the System

Setup Guide included with your

hub.

2 Insert the battery

The window/door sensor is battery

powered.

3 Registration

Required only if the window/door

sensor was purchased separately

(i.e., not as part of a bundle).

4 Confirm the installation area

Read the information in this

document to confirm that the

desired installation area is suitable

to proper operation.

5 Temporary placement

Temporarily place the window/

door sensor in the desired location

and confirm that it operates

properly (page 11).

6 Installation

Install the window/door sensor on

the same position where proper

For assistance, please visit www.panasonic.com/support

Setup

operation was confirmed

(page 14).

Inserting the battery

R USE ONLY a CR2 Lithium battery.

R Confirm the polarities (

, ).

1 Remove the sensor unit cover.

R Lift from the indented area (A)

and open the sensor unit cover

(B).

2 Insert the battery.

3 Attach the sensor unit cover.

Registering the

window/door sensor

This procedure is not required for

devices that were included as part of

a bundle.

Before you can use the window/door

sensor, it must be registered to the hub.

If you purchased devices separately

(i.e., not as part of a bundle), you must

You can register each device by using

the registration buttons or the [Home

Network] app.

Using registration buttons

1 Hub:

Press and hold M OTHER

DEVICEN until the LED indicator

blinks in green.

2 Window/door sensor:

Remove the sensor unit cover and

press and hold M N until the

LED indicator blinks in green

(page 8).

R When registration is complete,

the hub sounds one long beep.

Note:

R To cancel registration, press M N

on the hub and on the window/door

sensor.

R If registration fails, the hub sounds

several short beeps.

Using the app

When you register the window/door

sensor by using the [Home Network]

app, you can assign a name to your

For assistance, please visit www.panasonic.com/support

Setup

devices and group them by location.

For more information, refer to the

User’s Guide (page 17).

Changing the sensor

type

You can select whether a window/door

sensor functions as a window sensor or

as a door sensor. For more

information, refer to the User’s Guide

(page 17).

Wireless

communication

range

The wireless communication range of

each device in the system from the hub

is approximately 50 m (160 feet)

indoors and approximately 300 m

(1,000 feet) outdoors. Wireless

communication may be unreliable

when the following obstacles are

located between the hub and other

devices.

R Metal doors or screens

R Walls containing aluminum-sheet

insulation

R Walls made of concrete or

corrugated iron

R Double-pane glass windows

R Multiple walls

R When using each device on

separate floors or in different

buildings

Note:

R You can check the window/door

sensor’s communication status by

pressing M

N. If the LED indicator

is lit in green or red, the sensor is

communicating properly with the

hub. If the LED indicator blinks in

red, it is out of range of the hub.

For assistance, please visit www.panasonic.com/support

Setup

Temporary placement

Before installing the window/door sensor, temporarily place it in the desired

location and confirm that it operates properly by pressing M N.

Important:

R Attach the sensor unit to the outer frame of the window or door, and the magnet

unit to the inner frame.

R Attach both units so that the “ ” marks point toward each other and are within

25.4 mm (1 inch) of each other.

R The window/door sensor will not operate properly if the “ ” marks are too far

apart or are facing the wrong way.

Confirming proper operation

After temporarily placing the window/door sensor in the desired location, press

M N while the window or door is closed. The window/door sensor’s LED indicator

lights as follows.

Indicator Status

Green, lit The installation position is correct.

Red, lit

The “ ” marks on the sensor unit and the magnet unit

are too far from each other. Re-attach the sensor unit

and the magnet unit so that they point directly at each

other and are no more than 25.4 mm (1 inch) apart.

Red, blinking The sensor unit is out of range of the hub. Refer to the

information on page 10.

Note:

R Depending on the condition and material of the surface where the sensor unit

and magnet unit are installed, the LED indicator may light in red even if the “ ”

marks point directly at each other and are no more than 25.4 mm (1 inch) apart.

For assistance, please visit www.panasonic.com/support

Setup

Example 1: Installed on the left of the window

Correct Incorrect

“ ” marks point directly at each

other and are within 25.4 mm (1 inch).

{xC}

GREEN

“ ” marks are not aligned. Magnet

unit is too high/too low.

{xC}

RED

“ ” marks are aligned but units

are too far apart.

{xC}

RED

For assistance, please visit www.panasonic.com/support

Setup

Example 2: Installed on the right of the window

Correct Incorrect

“ ” marks point directly at each

other and are within 25.4 mm (1 inch).

{xC}

GREEN

“ ” marks are not aligned. Magnet

unit is too high/too low.

{xC}

RED

“ ” marks are aligned but units

are too far apart.

{xC}

RED

For assistance, please visit www.panasonic.com/support

Setup

Installation

Install the window/door sensor in the same position where proper operation was

confirmed (page 11). You can install the window/door sensor using screws or

double-sided tape, depending on your preference or the material of the installation

area.

Note:

R When installing, make sure the battery is inserted properly and the sensor unit

cover is completely closed.

R Use screws when installing on a wooden surface. Do not use double-sided tape.

Securing with screws

1 Remove the covers from each unit.

R Lift from the indented area (A) and open the sensor unit cover (B).

For assistance, please visit www.panasonic.com/support

Setup

2 Sensor unit:

Attach the sensor unit.

Screws

86.2 mm (3 25/64 inches)

Magnet unit:

Attach the magnet unit.

Screws

24.4 mm (31/32 inches)

3 Attach the covers.

Important:

Align the “ ” marks on the sensor unit and the magnet unit so that they

point directly at each other and are no more than 25.4 mm (1 inch) apart.

For assistance, please visit www.panasonic.com/support

Setup

Securing with double-sided tape

Note:

R Make sure the surfaces of the sensor unit, magnet unit, and the installation area

are clean and dry before applying double-sided tape.

1 Check that the sensor unit cover and magnet unit cover are attached.

2 Affix double-sided tape to the sensor unit and magnet unit.

R Make sure the tape covers the screw holes on the back of each unit.

3 Install the sensor unit and magnet unit.

R Press firmly on each unit to ensure solid adhesion to the installation surface.

Important:

Align the “ ” marks on the sensor unit and the magnet unit so that they

point directly at each other and are no more than 25.4 mm (1 inch) apart.

Removing when secured with double-sided tape

1 Tie a piece of thread to two sticks, screwdrivers, etc.

2 Pull the thread tight and use it to cut the double-sided tape, and then remove

any excess tape.

Excess tape

For assistance, please visit www.panasonic.com/support

Setup

Testing the window/

door sensor

You can check the window/door

sensor’s LED indicator and test the

performance of the window/door

sensor.

1 Remove the sensor unit cover.

2 Press M N on the sensor unit.

3 Open and close the window or

door several times.

R Make sure that the LED

indicator lights in green when

you close the window or door.

4 Press M

N again.

Note:

R If the LED indicator lights in red

when the window or door is closed,

the window/door sensor is not

installed properly. Re-evaluate the

position of the sensor unit and

magnet unit (page 11).

Features available

when using the

[Home Network] app

Some of the window/door sensor’s

features that are available when using

the [Home Network] app are listed

below. For more information, refer to

the User’s Guide (page 17).

– Security system

You can use the app to arm and

disarm the security system, confirm

the current status of the sensor, and

view a log of previous security

events.

– Home control

You can configure the window/door

sensor to trigger other system

events, such as camera recording,

turning on an electric device (such

as a lamp), etc. (Appropriate device

required.)

– Telephone alert

You can configure the system to call

a preprogrammed phone number

when the window/door sensor is

triggered.

Accessing the User’s

Guide

The User’s Guide is a collection of

online documentation that helps you

get the most out of the [Home

Network] app.

1 iPhone

/iPad

Tap

in the app’s home screen.

Android™ devices

Tap or press your mobile

device’s menu button in the app’s

home screen.

2 Tap [User’s Guide].

Note:

R You can also access the User’s

Guide at the web page listed below.

www.panasonic.net/pcc/support/tel/

homenetwork/manual/

For assistance, please visit www.panasonic.com/support

Appendix

Specifications

R Frequency range

DECT: 1.92 GHz – 1.93 GHz

R RF transmission power

DECT: 115 mW (max.)

R Power source

Lithium battery CR2 (1 ´ 3.0 V,

850 mAh)

R Operating conditions

-10 °C – 40 °C (14 °F – 104 °F)

R Battery life

Approx. 2 years (when window/door

is opened and closed 10 times a

day, in an environment of 25 °C

(77 °F))

R Dimensions

Sensor unit: Approx. 102 mm ´

31 mm ´ 22 mm (4 inches ´ 1 7/32

inches ´ 7/8 inches)

Magnet unit: Approx. 37 mm ´

14 mm ´ 14 mm (1 15/32 inches ´

9/16 inches ´ 9/16 inches)

R Mass (weight)

Sensor unit: Approx. 39 g (0.09 lb),

excluding the battery

Magnet unit: Approx. 8 g (0.02 lb)

For assistance, please visit www.panasonic.com/support

Appendix

FCC and other

information

This device complies with Part 15 of

the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

Privacy of communications may not be

ensured when using this phone.

CAUTION:

Any changes or modifications not

expressly approved by the party

responsible for compliance could void

the user’s authority to operate this

device.

NOTE:

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are

designed to provide reasonable

protection against harmful interference

in a residential installation. This

equipment generates, uses, and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instructions, may cause

harmful interference to radio

communications. However, there is no

guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful

interference to radio or television

reception, which can be determined by

turning the equipment off and on, the

user is encouraged to try to correct the

interference by one or more of the

following measures:

– Reorient or relocate the receiving

antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an

outlet on a circuit different from that

to which the receiver is connected.

– Consult the dealer or an

experienced radio/TV technician for

help.

Some cordless telephones operate at

frequencies that may cause

interference to nearby TVs and VCRs.

To minimize or prevent such

interference, the base of the cordless

telephone should not be placed near or

on top of a TV or VCR. If interference is

experienced, move the cordless

telephone further away from the TV or

VCR. This will often reduce or eliminate

interference.

FCC RF Exposure Warning:

R This product complies with FCC

radiation exposure limits set forth for

an uncontrolled environment.

R To comply with FCC RF exposure

requirements, the device must be

installed and operated 20 cm

(8 inches) or more between the

product and all person’s body.

R This product may not be collocated

or operated in conjunction with any

other antenna or transmitter.

R For body-worn operation, the

handset must be used only with a

non-metallic accessory. Use of other

accessories may not ensure

compliance with FCC RF exposure

requirements.

For assistance, please visit www.panasonic.com/support

Appendix

Notice:

R FCC ID can be found inside the

sensor unit.

For assistance, please visit www.panasonic.com/support

Appendix

Customer services

Customer Services Directory (United States and

Puerto Rico)

www.panasonic.com/support

or, contact us via the web at:

www.panasonic.com/contactinfo

For hearing or speech impaired TTY users, TTY: 1-877-833-8855

www.pstc.panasonic.com

or, send your request by E-mail to:

[email protected]

Obtain Product Information and Operating Assistance; locate your nearest

Dealer or Service Center; purchase Parts and Accessories; or make Customer

Service and Literature requests by visiting our Web Site at:

You may also contact us directly at: 1-800-211-PANA (1-800-211-7262),

Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST.

Purchase Parts, Accessories and Owner’s Manual online for all

Panasonic Products by visiting our Web Site at:

You may also contact us directly at:1-800-237-9080 (Fax Only)

(Monday - Friday 9 am to 9 pm, EST.)

Panasonic National Parts Center

20421 84th Avenue S., Kent, WA 98032

(We accept Visa, MasterCard, Discover Card, American Express.)

For hearing or speech impaired TTY users, TTY: 1-866-605-1277

Accessory Purchases (United States and

Puerto Rico)

For assistance, please visit www.panasonic.com/support

Appendix

Warranty (For United States and Puerto Rico)

Limited Warranty Coverage

Labor

One (1) Year

Parts

One (1) Year

Online Repair Request

To submit a new repair request and for quick repair status visit our Web Site at

www.panasonic.com/repair

PROOF OF PURCHASE.

Panasonic Home Network System Products

Limited Warranty

Mail-In Service--Online

If your product does not work properly because of a defect in materials or workmanship,

Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length

of the period indicated on the chart below, which starts with the date of original purchase

(“Limited Warranty period”), at its option either (a) repair your product with new or

refurbished parts, or (b) replace it with a new or a refurbished equivalent value product, or

the warrantor.

During the “Labor” Limited Warranty period there will be no charge for labor. During the

“Parts” Limited Warranty period, there will be no charge for parts. You must mail-in your

product prepaid during the Limited Warranty period. This Limited Warranty excludes both

parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited

Warranty only applies to products purchased and serviced in the United States or Puerto

Rico. This Limited Warranty is extended only to the original purchaser and only covers

products purchased as new.

Home Network System Products

microSD card (Included model only) 90 days N/A

When shipping the unit carefully pack in a padded shipping carton, include all

accessories, and send it prepaid. Include a letter detailing the complaint, a return

address and provide a day time phone number where you can be reached. P.O. Boxes

are not acceptable. Keep the tracking number for your records. A copy of valid

registered receipt is required under the 1 year parts and labor Limited Warranty.

For Limited Warranty service for headsets if a headset is included with this

product please follow instructions above.

IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE

PURCHASER WILL BE REQUIRED TO FURNISH A SALES

RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,

AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE

CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH

For assistance, please visit www.panasonic.com/support

Appendix

Limited Warranty Limits And Exclusions

This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship,

and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty

ALSO DOES NOT COVER damages which occurred in shipment, or failures which are

caused by products not supplied by the warrantor, or failures which result from accidents,

misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty

installation, set-up adjustments, misadjustment of consumer controls, improper maintenance,

power line surge, lightning damage, modification, introduction of sand, humidity or liquids,

commercial use such as hotel, office, restaurant, or other business or rental use of the

product, or service by anyone other than a Factory Service Center or other Authorized

Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED

WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR

ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this

excludes damages for lost time, lost calls or messages, cost of having someone remove or

re-install an installed unit if applicable, travel to and from the servicer. The items listed are not

exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,

INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD

OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages,

or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.

This Limited Warranty gives you specific legal rights and you may also have other rights

which vary from state to state. If a problem with this product develops during or after the

Limited Warranty period, you may contact your dealer or Service Center. If the problem is not

handled to your satisfaction, then write to the warrantor's Consumer Affairs Department at the

addresses listed for the warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE

YOUR RESPONSIBILITY.

When you ship the product

ȷCarefully pack your unit, preferably in the original carton.

ȷAttach a letter, detailing the symptom.

ȷSend the unit to Panasonic Exchange Center, prepaid and adequately insured.

ȷDo not send your unit to Panasonic Corporation of North America listed on the back

cover or to executive or regional sales offices. These locations do not repair consumer

products.

For assistance, please visit www.panasonic.com/support

Appendix

1 Use CR2 lithium battery.

Use the Home Network app to access the User’s Guide

and refer to the Troubleshooting section.

IMPORTANT!

If your product is not working properly. . .

Visit our Web site: www.panasonic.com/support

LFAQ and troubleshooting hints are available.

For your future reference

We recommend keeping a record of the following information to assist

with any repair under warranty.

Serial No. Date of purchase

(found inside the sensor unit)

Name and address of dealer

Attach your purchase receipt here.

Two Riverfront Plaza, Newark, NJ 07102-5490

Guía de instalación

Sistema de red doméstico

Sensor para ventana/puerta

Modelo n° KX-HNS101

Gracias por adquirir un producto Panasonic.

Este documento explica como instalar el sensor para ventana/puerta de forma

correcta.

Para obtener detalles sobre cómo usar el sistema, consulte la Guía del usua-

rio (página 13).

Lea este documento antes de usar la unidad, y guárdelo para consultarlo en el

futuro.

Para obtener ayuda, visite nuestro sitio web: www.panasonic.com/support

para clientes en los EE. UU. o Puerto Rico (solo en inglés).

Por favor, registre su producto: www.panasonic.com/prodreg

PNQX6699ZA CC0714WK0 (E)

Configuración
Nombres de los componentes y
funciones .........................................3
Acerca del Led indicador .................3
Resumen de configuración ..............3
Insertar la pila ..................................4
Registro del sensor para ventana/
puerta ..............................................4
Cambio de tipo de sensor ................5
Alcance de la comunicación
inalámbrica ......................................5
Colocación temporal ........................6
Instalación .......................................9
Apéndice
Prueba del sensor para ventana/
puerta ............................................13
Acceso a la Guía del usuario .........13
2
Tabla de Contenido

Nombres de los

componentes y

funciones

n Unidad del sensor

n Unidad de imán

Tapa de la unidad del sensor

M N

Se usa para confirmar el estado del

sensor o para registrar el sensor en el

hub.

Led indicador

Tapa de la unidad del imán

Acerca del Led

indicador

Puede oprimir M N y verificar el Led

indicador para confirmar el estado del

sensor.

Indicador Estado

Verde, en-

cendido

La ventana/puerta está

cerrada

Rojo, encen-

dido

La ventana/puerta está

abierta

Rojo, parpa-

deante

El sensor está fuera de al-

cance del hub

Verde, par-

padeante

Modo de registro (oprimió

y mantuvo oprimido

M N)

Apagado Sin batería

Nota:

R El Led indicador no indica el estado del

sensor si el sensor no se ha registrado

(página 13).

Resumen de

configuración

1 Configuración inicial

Asegúrese de poder acceder al

sistema mediante su dispositivo móvil.

Para obtener más detalles, consulte la

Guía de configuración del sistema que

viene con su hub.

2 Inserte la pila

El sensor para ventana/puerta usa

pilas.

3 Registro

Solo se requiere si el sensor para

ventana/puerta se compró por

separado (es decir, no como parte de

un paquete).

4 Confirme el área de instalación

Lea la información de este documento

para confirmar que el área de

instalación deseada sea la adecuada

para el correcto funcionamiento.

Para obtener ayuda, visite www.panasonic.com/support

Configuración

5 Colocación temporal

Coloque temporalmente el sensor

para ventana/puerta en la ubicación

deseada y confirme que funciona

correctamente (página 6).

6 Instalación

Instale el sensor para ventana/puerta

en la misma posición en la que se

confirmó el funcionamiento correcto

(página 9).

Insertar la pila

R USE SOLO pilas de litio CR2.

R Verifique las polaridades ( , ).

1 Quite la tapa de la unidad del sensor.

R Levante del área concava (A) y

abra la tapa de la unidad del

sensor (B).

2 Inserte la pila.

3 Coloque la tapa de la unidad del

sensor.

Registro del sensor

para ventana/puerta

Este procedimiento no es necesario para

unidades que son parte de un paquete.

Antes de que pueda usar el sensor para

ventana/puerta, se debe registrar en el hub.

Si compró los dispositivos por separado (es

decir, no como parte de un paquete), debe

registrar cada dispositivo en el hub.

Puede registrar cada unidad mediante los

botones de registro o la aplicación [Red

doméstico].

Uso de los botones de registro

1 Hub:

Oprima y mantenga oprimido M

OTHER DEVICEN hasta que el Led

indicador parpadee en verde.

2 Sensor para ventana/puerta:

Quite la tapa de la unidad del sensor y

oprima y mantenga oprimido M N

hasta que el Led indicador parpadee

en verde (página 3).

R Cuando se ha completado el

registro, el hub emitirá un pitido

largo.

Nota:

R Para cancelar el registro, oprima M N

en el hub y en el sensor para ventana/

puerta.

R Si el registro falla, el hub emitirá varios

pitidos cortos.

Para obtener ayuda, visite www.panasonic.com/support

Configuración

Uso de la aplicación

Cuando registra el sensor para ventana/

puerta al usar la aplicación [Red

doméstico], puede asignarle un nombre a

sus dispositivos y agruparlos por ubicación.

Para obtener más información, consulte la

Guía del usuario (página 13).

Cambio de tipo de

sensor

Puede seleccionar si un sensor para

ventana/puerta funciona como sensor para

ventana o sensor para puerta. Para obtener

más información, consulte la Guía del

usuario (página 13).

Alcance de la

comunicación

inalámbrica

El alcance de la comunicación inalámbrica

de cada dispositivo en el sistema del hub

es de aproximadamente 50 m (160 pies) en

interiores y de aproximadamente 300 m

(1,000 pies) en el exterior. Es posible que la

comunicación inalámbrica no sea tan

confiable cuando se encuentran los

obstáculos siguientes entre el hub y otros

dispositivos.

R Puertas o pantallas metálicas

R Paredes que contengan aislamiento de

aluminio

R Paredes de hormigón o hierro corrugado

R Ventanas de vidrio doble

R Varias paredes

R Cuando los dispositivos están en pisos o

edificios diferentes

Nota:

R Puede verificar el estado de la

comunicación del sensor para ventana/

puerta oprimiendo M N. Si el Led

indicador está iluminado en verde o rojo,

el sensor se está comunicando de forma

adecuada con el hub. Si el Led indicador

parpadea en rojo, se encuentra fuera de

alcance del hub.

Para obtener ayuda, visite www.panasonic.com/support

Configuración

Colocación temporal

Antes de instalar el sensor para ventana/puerta, colóquelo temporalmente en la ubicación

deseada y confirme que funciona correctamente presionando M N.

Importante:

R Coloque la unidad del sensor en el marco exterior de la ventana o puerta, y la unidad de

imán en el marco interior.

R Coloque ambas unidades de forma tal que las marcas “ ” apunten la una a la otra y

estén a 25.4 mm (1 pulgada) de distancia la una de la otra.

R El sensor para ventana/puerta no funcionará apropiadamente si las marcas “ ” están

muy separadas la una de la otra o si apuntan en la dirección incorrecta.

Verificación del funcionamiento correcto

Después de colocar temporalmente el sensor para ventana/puerta en la ubicación deseada,

oprima M N mientras la ventana o puerta está cerrada. El Led indicador del sensor para

ventana/puerta se ilumina de la siguiente manera.

Indicador Estado

Verde, encendido La posición de instalación es correcta.

Rojo, encendido

Las marcas “ ” en la unidad del sensor y la unidad del imán

están muy alejadas la una de la otra. Vuelva a colocar la unidad

del sensor y la unidad del imán de forma tal que apunten la una

a la otra y que estén a no más de 25.4 mm (1 pulgada) de dis-

tancia.

Rojo, parpadeante La unidad del sensor está fuera de alcance del hub. Consulte la

información en página 5.

Nota:

R Dependiendo de las condiciones y del material de la superficie donde la unidad del

sensor y la unidad del imán se instalaron, el Led indicador podría iluminarse en rojo

aunque las marcas “ ” apunten la una a la otra y estén a no más de 25.4 mm

(1 pulgada) de distancia.

Para obtener ayuda, visite www.panasonic.com/support

Configuración

Ejemplo 1: Instalación a la izquierda de la ventana

Correcto Incorrecto

Las marcas “ ” de ambas unidades

apuntan la una a la otra y están a 25.4 mm

(1 pulgada).

{xC}

VERDE

Las marcas “ ” no están alineadas.

La unidad del imán está muy alta/muy baja.

{xC}

ROJO

Las marcas “ ” están alineadas, pero

las unidades están muy separadas.

{xC}

ROJO

Para obtener ayuda, visite www.panasonic.com/support

Configuración

Ejemplo 2: Instalación a la derecha de la ventana

Correcto Incorrecto

Las marcas “ ” de ambas unidades

apuntan la una a la otra y están a 25.4 mm

(1 pulgada).

{xC}

VERDE

Las marcas “ ” no están alineadas.

La unidad del imán está muy alta/muy baja.

{xC}

ROJO

Las marcas “ ” están alineadas, pero

las unidades están muy separadas.

{xC}

ROJO

Para obtener ayuda, visite www.panasonic.com/support

Configuración

Instalación

Instale el sensor para ventana/puerta en la misma posición donde se confirmó el

funcionamiento correcto (página 6). Ahora puede instalar el sensor para ventana/puerta con

tornillos o cinta adhesiva de doble cara, en función de su preferencia o del material del área

de instalación.

Nota:

R Al instalar, asegúrese de que la batería esté colocada adecuadamente y que la tapa de

la unidad del sensor esté cerrada por completo.

R Cuando instale en superficies de madera, use tornillos. No use cinta adhesiva de doble

cara.

Ajuste con tornillos

1 Quite las tapas de cada unidad.

R Levante del área concava (A) y abra la tapa de la unidad del sensor (B).

Para obtener ayuda, visite www.panasonic.com/support

Configuración

2 Unidad del sensor:

Coloque la unidad del sensor.

Tornillos

86.2 mm (3 25/64 pulgadas)

Unidad del imán:

Coloque la unidad del imán.

Tornillos

24.4 mm (31/32 pulgadas)

3 Coloque las tapas.

Importante:

Alinee las marcas “ ” en la unidad del sensor y en la unidad del imán de forma tal

que se apunten la una a la otra y estén a no más de 25.4 mm (1 pulgada).

Para obtener ayuda, visite www.panasonic.com/support

Configuración

Ajuste con cinta adhesiva de doble cara

Nota:

R Asegúrese de que las superficies de la unidad del sensor, la unidad del imán y el área de

instalación están limpias y secas antes de colocar la cinta adhesiva de doble cara.

1 Verifique que se hayan colocado la tapa de la unidad del sensor y la tapa de la unidad

del imán.

2 Pegue la cinta adhesiva de doble cara a la unidad del sensor y la unidad del imán.

R Asegúrese de que la cinta cubra los hoyos de los tornillos en la parte posterior de

cada unidad.

3 Instale la unidad del sensor y la unidad del imán.

R Presione con firmeza en cada unidad para asegurar una adhesión sólida a la

superficie de instalación.

Importante:

Alinee las marcas “ ” en la unidad del sensor y en la unidad del imán de forma tal

que se apunten la una a la otra y estén a no más de 25.4 mm (1 pulgada).

Para obtener ayuda, visite www.panasonic.com/support

Configuración

Cómo extraer cuando se asegura con cinta adhesiva de doble cara

1 Ate un pedazo de hilo a dos palos, destornilladores, etc.

2 Tire firmemente del hilo y úselo para cortar la cinta de doble cara, y luego elimine

cualquier exceso de cinta.

Exceso de cinta

Para obtener ayuda, visite www.panasonic.com/support

Configuración

Prueba del sensor para

ventana/puerta

Puede observar el Led indicador del sensor

para ventana/puerta y probar el

funcionamiento del sensor para ventana/

puerta.

1 Quite la tapa de la unidad del sensor.

2 Oprima M N en la unidad del

sensor.

3 Abra y cierre la ventana o puerta

varias veces.

R Asegúrese de que el Led indicador

se encienda en verde cuando

cierra la ventana o puerta.

4 Presione M N de nuevo.

Nota:

R Si el Led indicador se enciende en rojo

cuando la ventana o la puerta está

cerrada, el sensor para ventana/puerta

no está bien instalado. Revalúe la

posición de la unidad del sensor y la

unidad del imán (página 6).

Acceso a la Guía del

usuario

La Guía del usuario es una colección de

documentación en línea que lo ayuda a

aprovechar al máximo la aplicación [Red

doméstico].

1 iPhone

/iPad

Toque en la pantalla de inicio de

la aplicación.

Dispositivos Android™

Toque u oprima el botón menú de

su dispositivo en la pantalla de inicio

de la aplicación.

2 Toque [Guía del usuario].

Nota:

R También puede acceder a la Guía del

usuario mediante la página web a

continuación.

www.panasonic.net/pcc/support/tel/

homenetwork/manual/

Para obtener ayuda, visite www.panasonic.com/support

Apéndice

Notas

Panasonic KXHN6003 Instrucciones de operación

Marca: Panasonic

Modelo: KXHN6003

Tipo: Instrucciones de operación

Este manual también es adecuado para

Descargar PDF

informe

En otros idiomas

English: Panasonic KXHN6003 Operating instructions

Panasonic KXHN6003 Instrucciones de operación

Este manual también es adecuado para

Panasonic KXHN6003 Instrucciones de operación

En otros idiomas

Documentos relacionados