Insignia NS-24D310NA21 Guía del usuario

Marca: Insignia

Modelo: NS-24D310NA21

Categoría: Televisores LCD

Tipo: Guía del usuario

USER GUIDE

Before using your new product, please read these instructions to prevent any damage.

LED TV User Guide

www.insigniaproducts.com

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

INlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Game modeVideo games generally require adjustments to the TV picture settings to get the maximum experience. By sim-

ply pressing the GAME button on your remote control, your TV settings automatically adjust for vid-

eo games. It couldn't be easier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Audio accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

TV components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

TV front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Connecting a cable or satellite box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

HDMI (best). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

AV (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Coaxial (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting an antenna or cable TV (no box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting a DVD or Blu-ray player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

HDMI (best). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

AV (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting a game console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

HDMI (best). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

AV (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting external speakers or a sound bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Digital audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using a universal remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Programming universal remote controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Viewing universal remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Turning on your TV for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Understanding the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Turning your TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Selecting the video input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

On-screen menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Selecting a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Viewing channel information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Contents

www.insigniaproducts.com

Navigating the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Adjusting settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Using INlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Using a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Switching to USB mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Adjusting the TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Automatically adjusting the aspect ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Setting the power on picture mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Adjusting sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Selecting the audio out mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Playing TV audio only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Locking the power button on your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Using closed captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Adjusting accessibility settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Cleaning the TV cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Cleaning the TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Using the HELP menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

INlink (CEC-compatible) device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

ONE-YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

PÓLIZA DE GARANTÍA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

CONCEPTOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

CONDICIONES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Insignia LED TV

www.insigniaproducts.com

Insignia LED TV

Introduction

Congratulations on your purchase of a high-quality,

Insignia TV. Your TV represents the state-of-the-art in

LED TV technology and is designed for reliable and

trouble-free performance.

INlink

Enjoy the benefit of having HDMI CEC-compatible

products plug and play! No setup is needed! CEC

technology lets different devices discover and

communicate with each other. (See page 21 for

instructions on how to use INlink.)

Game modeVideo games generally require

adjustments to the TV picture settings to get the

maximum experience. By simply pressing the

GAME button on your remote control, your TV

settings automatically adjust for video games. It

couldn't be easier.

Audio accessibility

Your TV provides audio descriptions of menus and some

remote control functions. Depending on the broadcaster,

audio narration of key elements in programs may also be

available. (See page 30 for instructions on how to turn on

audio narration.)

TV components

This section covers basic information for:

• TV front

• Jacks

• Remote control

TV front

You can find these items on the front of your TV.

ITEM DESCRIPTION

Remote control sensor Receives signals from the remote control. Do not block.

Power indicator Turns off when your TV is on. Lights red when your TV is off (standby mode).

Insignia LED TV

www.insigniaproducts.com

Jacks

Your TV may have any of the following items:

ITEM DESCRIPTION FUNCTION

Power/Input button

Power—Press to turn on your TV when your TV is off (in standby

mode). Press and hold to turn off your TV when your TV is on.

Warning: When your TV is off, power still flows through it. To

completely disconnect power, unplug the power cord.

Input—When your TV is turned on, short press to open the

FUNCTION list. Short press this button to move between functions

and highlight the function you want, then press and hold this button

to select the function. Your can select:

• Exit to close the FUNCTION list.

• Input Source to open the INPUT SOURCE list and select a video

input source.

• Channel List to open the channel list and select a channel.

• VOL+ to increase the volume.

• VOL– to decrease the volume.

Digital OPTICAL output

jack

Connect a sound bar, digital speaker system, or home theater system

to this jack to listen to TV audio through external speakers. See

Digital audio on page 13.

Digital COAXIAL output

jack

Headphone jack

AUDIO OUT jack

On some TVs the headphone jack and audio out jack are combined

into one jack.

Connect headphones, a sound bar, analog speaker system, or a

home theater system to this jack to listen to TV audio through

external speakers. See Analog audio on page 14.

Antenna/Cable in jack

Connect an antenna or cable TV to this jack. See Coaxial (good) on

page 9 or Connecting an antenna or cable TV (no box) on page 9.

Analog video and audio

(AV) jacks

Connect the video and audio for an AV device to these jacks. See AV

(good) on page 8, 10, or 11.

USB

Connect a USB flash drive to this jack to view compatible JPEG

picture files. See Connecting a USB flash drive on page 12 and Using

a USB flash drive on page 22.

HDMI

Connect an HDMI device to this jack. See HDMI (best) on page 8, 10,

or 11, or Connecting a computer on page 12.

HDMI/ARC

Connect an ARC-enabled home theater receiver to this jack.

Connect an HDMI device to this jack. See HDMI (best) on page 8, 10,

or 11, or Connecting a computer on page 12.

Insignia LED TV

www.insigniaproducts.com

RESET

Press to reset your TV to the factory defaults. If this button is in a

recessed hole, use a thin item, like a paper clip, to press the button.

SERVICE Do not connect a device to this jack. Do not insert anything into this

jack.

CAUTIONS:

• Check the jacks for position and type before making any connections.

• Loose connections can cause poor audio or video quality. Make sure that all connections are tight and secure.

• The external audio/video equipment shown may be different from your equipment. If you have questions, refer to the documentation

that came with your equipment.

• Always unplug the power cord when connecting external equipment.

ITEM DESCRIPTION FUNCTION

Insignia LED TV

www.insigniaproducts.com

Remote control

# BUTTON PRESS TO...

(power)

Turn your TV on or off (standby mode).

Warning: When your TV is off, power

still flows through it. To disconnect

power, unplug the power cord.

Numbers

Enter channel numbers and the

parental control password.

Enter a digital sub-channel number. See

Selecting a channel on page 20.

MENU Open the on-screen menu.

ENTER

Confirm selections or changes in TV

menus.

EXIT Close the on-screen TV menu.

ACC

Open the Accessibility menu. See

Adjusting accessibility settings on

page 30.

VOL+/VOL–

TV: Adjusts the volume.

TV menu: Navigate left or right.

USB: Control a photo slideshow.

ASPECT

TV: Change how the pictures appears

on the screen.

USB: Zoom when displaying a photo.

SLEEP

Set the sleep timer. You can select Off,

5, 10, 15, 30, 60, 90, 120, 180, or 240

minutes.

Media

controls

Control INlink-compatible (HDMI CEC)

devices. See Using INlink on page 21.

INPUT

Open the INPUT SOURCE list and select a

video input source. See Selecting the

video input source on page 19.

(return) Return to the previous channel.

FAVORITE

Set up the Favorite channel list or open

the existing Favorite channel list. See

the Favorite Channel Setup and

Favorite Channel List options in

Changing channel settings on page 27.

   

TV menus—Navigate on-screen TV

menus and adjust settings.

USB—Control a photo slideshow.

INFO*

Display TV status information, such as

the channel number, channel name (if

available), or signal source. See Viewing

channel information on page 20.

Turn closed captioning on or off. You

can select CC Off, CC On, or CC On

when mute. See the Caption Control

option in Using closed captioning on

page 29.

MUTE Mute or un-mute the sound.

CH /CH

TV: Change to the next higher or lower

channel in the channel list.

TV menu: Navigate up or down.

GAME

Change the picture mode to Game

mode.

PICTURE

Select the picture mode. You can select

Vivid, Standard, Energy Savings,

Movie, Game, or Custom. See the

Picture Mode option in Adjusting the

TV picture on page 23.

AUDIO

Select the audio mode. You can select

Standard, Theater, Music, News, or

Custom. See the Audio Mode option in

Adjusting sound settings on page 25.

# BUTTON PRESS TO...

Insignia LED TV

www.insigniaproducts.com

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best

connection type available. See Jacks on page 5.

You can connect a cable or satellite box using:

• HDMI (best)

• AV (good)

• Coaxial (good)

HDMI (best)

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.

2 Connect a coaxial cable (not provided) to the cable wall jack and to the cable-in jack on the cable or satellite box.

3 Connect an HDMI cable (not provided) to one of the HDMI jacks on your TV and to the HDMI out jack on the cable or

satellite box.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.

5 Press INPUT to open the INPUT SOURCE list, select the HDMI jack you connected the cable or satellite box to, then press

ENTER.

AV (good)

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.

2 Connect a coaxial cable (not provided) to the cable wall jack and to the cable-in jack on the cable or satellite box.

3 Connect an AV cable (not provided) to the AV jacks on your TV and to the AV out jacks on the cable or satellite box.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.

5 Press INPUT to open the INPUT SOURCE list, select AV, then press ENTER.

Note: An HDMI cable carries both audio and video. You do not need to use any audio cables.

Note: Cables are often color-coded to match color-coded jacks.

IMPORTANT: When you connect the audio using the AV jacks, the audio output is analog.

Cable or satellite box

HDMI Cable

Coaxial

cable

HMDI jack Cable wall jack

Video and audio jacks

AV cable

Cable or satellite box Cable wall jack

Coaxial

cable

Insignia LED TV

www.insigniaproducts.com

Coaxial (good)

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.

2 Connect the coaxial cable to the cable wall jack and to the cable-in jack on the cable or satellite box.

3 Connect a coaxial cable (not provided) to the antenna/cable jack on your TV and to the coaxial out jack on the cable or

satellite box.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.

5 Press INPUT to open the INPUT SOURCE list, select TV, then press ENTER.

6 If you cannot tune to channels you know exist, scan for channels. See the Auto Channel Search option in Changing

channel settings on page 27.

Connecting an antenna or cable TV (no box)

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.

2 Connect a coaxial cable (not provided) to the antenna/cable jack on your TV and to the antenna or cable TV wall jack.

3 Plug your TV’s power cord into a power outlet, then turn on your TV.

4 Press INPUT to open the INPUT SOURCE list, select TV, then press ENTER.

5 If you cannot tune to channels you know exist, scan for channels. See the Auto Channel Search option in Changing

channel settings on page 27.

Notes:

• Use a coaxial cable to eliminate interference and noise from radio waves.

• If the antenna is not installed correctly, contact qualified service personnel to correct the problem.

• If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-top

antenna with a built-in amplifier.

• If the picture quality is good on some channels and poor on others, the problem may be caused by a poor or weak signal from the

broadcaster or cable TV provider.

• If you connect to cable TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve

signal reception and picture quality. Contact your cable TV provider about upgrading to a set-top box.

• Many high-definition (HD) channels upscale standard-definition (SD) content. The picture displayed on your TV is still displayed as SD,

thus the picture quality will not be as clear or crisp as it would be if the content was originally recorded in HD.

Cable or satellite box

Coaxial cable

Cable wall jackAntenna/cable jack

Coaxial

cable

Coaxial cable

Antenna or cable TV (no box)

Antenna/cable

jack

Insignia LED TV

www.insigniaproducts.com

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection

type available. See Jacks on page 5.

You can connect a DVD or Blu-ray player using:

• HDMI (best)

• AV (good)

HDMI (best)

1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.

2 Connect an HDMI cable (not provided) to one of the HDMI jacks on your TV and to the HDMI out jack on the DVD or Blu-ray

player.

3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.

4 Press INPUT to open the INPUT SOURCE list, select the HDMI jack you connected the player to, then press ENTER.

AV (good)

1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.

2 Connect an AV cable (not provided) to the AV jacks on your TV and to the AV out jacks on the DVD or Blu-ray player.

3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.

4 If needed, set the player to the correct output mode. See the documentation that came with the player.

5 Press INPUT to open the INPUT SOURCE list, select AV, then press ENTER.

Note: An HDMI cable carries both audio and video. You do not need to use any audio cables.

Note: Cables are often color-coded to match color-coded jacks.

IMPORTANT: When you connect the audio using the AV jacks, the audio output is analog.

HDMI cable

DVD or Blu-ray

player

HDMI jack

AV cable

DVD or Blu-ray

player

Video and audio jacks

Insignia LED TV

www.insigniaproducts.com

Connecting a game console

You can connect a game console using:

• HDMI (best)

• AV (good)

HDMI (best)

1 Make sure that your TV’s power cord is unplugged and the game console is turned off.

2 Connect an HDMI cable (not provided) to one of the HDMI jacks on your TV and to the HDMI out jack on the game console.

3 Plug your TV’s power cord into a power outlet, then turn on your TV.

4 Turn on the game console, then set it to the correct output mode. See the documentation that came with the console.

5 Press INPUT to open the INPUT SOURCE list, select the HDMI jack you connected the console to, then press ENTER.

AV (good)

1 Make sure that your TV’s power cord is unplugged and the game console is turned off.

2 Connect the console-specific AV cable to the AV jacks on your TV and to the AV jack(s) on the game console.

3 Plug your TV’s power cord into a power outlet, then turn on your TV.

4 Turn on the game console, then set it to the correct output mode. See the documentation that came with the console.

5 Press INPUT to open the INPUT SOURCE list, select AV, then press ENTER.

Note: An HDMI cable carries both audio and video. You do not need to use any audio cables.

Note: Cables are often color-coded to match color-coded jacks.

IMPORTANT:

• Some older game consoles come with a special AV cable. See the documentation that came with your game console or check the

manufacturer’s website.

• When you connect the audio using the AV jacks, the audio output is analog.

HDMI cable

Game consoleHDMI jack

Game console

Console-specific AV cable

Video and audio jacks

Insignia LED TV

www.insigniaproducts.com

Connecting a computer

1 Make sure that your TV’s power cord is unplugged and the computer is turned off.

2 Connect an HDMI cable (not provided) to one of the HDMI jacks on your TV and to the HDMI out jack on the computer.

3 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.

4 Press INPUT to open the INPUT SOURCE list, select the HDMI jack you connected the computer to, then press ENTER.

5 Adjust the display properties on the computer, if necessary.

Connecting a USB flash drive

1 Plug a USB flash drive into the USB port on your TV.

2 Select Yes in the message that appears. The PHOTOS menu opens.

If you switch to a different video input source after you plug in the USB flash drive and want to switch back to the drive, press

INPUT to open the INPUT SOURCE list, select USB(Photos), then press ENTER. The PHOTOS menu opens.

CAUTION: Do not remove the USB flash drive or turn off the TV while using the USB flash drive. You may lose data or damage the USB flash

drive.

Note: The Photos viewer only supports JPEG format images (with “.jpg” file extensions) and not all JPEG files are compatible with your TV.

See Using a USB flash drive on page 22.

HDMI cable

Computer

HDMI jack

USB port

USB flash drive

Insignia LED TV

www.insigniaproducts.com

Connecting headphones

When you connect headphones, the TV speakers are muted.

1 Connect the headphones to the headphone jack on your TV.

2 In the screen that opens, select Headphones/Audio Out Variable, then press ENTER. See Selecting the audio out mode

on page 26.

Connecting external speakers or a sound bar

You can connect external speakers or a sound bar using:

• Digital audio

• Analog audio

Digital audio

Depending on the model, your TV may have a digital optical or digital coaxial audio jack.

1 Make sure that your TV’s power cord is unplugged and the digital speaker system or sound bar is turned off.

2 Connect a digital coaxial or digital optical audio cable (not provided) to the digital output jack on your TV and to the audio

in jack on the digital speaker system or sound bar.

3 Plug your TV’s power cord into a power outlet, then turn on your TV.

4 Turn on the digital speaker system or sound bar, then set it to the correct source. See the documentation that came with

the digital speaker system or sound bar.

5 On your TV’s Audio menu, select Digital Audio Format / Audio Delay, then set the Audio Format option to PCM. See the

Digital Audio Format / Audio Delay option in Adjusting sound settings on page 25.

WARNING: Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still

lets you hear the sound.

Notes:

• If you connect headphones when your TV is turned off, then you turn on your TV, the TV speakers are muted and the audio plays

through the headphones.

• You can also connect a home theater system, sound bar, or external speaker system to the headphone jack.

Headphone/Audio out

jack

Digital coaxial audio cable

Digital speaker system

Sound bar

Digital optical audio cable

Digital coaxial

audio jack

Digital optical

audio jack

Insignia LED TV

www.insigniaproducts.com

Analog audio

When you connect an analog speaker system or sound bar to the audio out jack, the TV speakers are muted.

1 Make sure that your TV’s power cord is unplugged and the analog speaker system or sound bar is turned off.

2 Connect an audio cable (not provided) to the audio out jack on your TV and to the audio in jacks on the analog speaker

system or sound bar.

3 Plug your TV’s power cord into a power outlet, then turn on your TV.

4 Turn on the analog speaker system or sound bar, then set it to the correct source. See the documentation that came with

the analog speaker system or sound bar.

5 On your TV, set the Headphones / Audio Out option on the Audio menu to Headphones/Audio Out Variable or Audio

Out Fixed. See the Headphones / Audio Out option in Adjusting sound settings on page 25.

Connecting power

1 If your power cord is not permanently connected to your TV, connect it to the power connector on your TV.

2 Connect the power cord to a power outlet.

CAUTION:

• Your TV should only be operated from the power source indicated on the label.

• Always unplug the power cord from the power outlet when you will not be using your TV for an extended period of time.

• If the power cord is permanently attached to your TV, do not try to unplug it from your TV.

Audio cable

Analog speaker system

Sound bar

Audio out jack

Insignia LED TV

www.insigniaproducts.com

Using a universal remote control

This section covers:

• Programming universal remote controls

• Viewing universal remote control codes

Programming universal remote controls

You can operate your Insignia TV with a new or existing

universal remote control.

1 See Viewing universal remote control codes on page 15

for common codes. If you have problems programming

your remote or need a different remote control code:

• Contact the universal remote control or

cable/satellite company of the remote control you

are trying to program.

• Visit www.insigniaproducts.com/remotecodes for

the latest remote control code information.

• Call the Insignia Customer Care Center at

1-877-467-4289.

2 Follow your universal remote control’s instructions to

enter the TV code you found in Step 1.

Viewing universal remote control codes

You can view a list of universal remote control codes in the

on-screen menu.

1 Select the HELP menu, then select Learn More.

2 Select Remote control codes. Your TV displays

information about the universal remote codes that you

can use to make your TV work with a universal remote.

3 Press ENTER or . Your TV displays a list of remote

control codes for various brands of universal remote

controls.

4 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Tips:

• If your universal remote control has a code search feature,

run a code search to identify a code that matches your TV.

See your universal remote control’s instructions for details.

• If your universal remote control has a “Learn” feature, you

can manually program it using the Insignia TV remote to

“teach” the commands one at a time. See your universal

remote control’s instructions for details.

Tips:

• The brand name is often visible on the front of the universal

remote control, and the model number is often visible on

the back.

• If your universal remote control isn’t listed on the chart,

refer to your universal remote control’s instructions and try

codes for the brands Orion, Emerson, Memorex, Sansui,

Sylvania, or Zenith. You may need to try several codes

before finding a match.

Note: You can also find codes for other remote controls at:

http://www.insigniaproducts.com/remotecodes

Or, check with your cable or satellite TV provider for the remote

control code.

Insignia LED TV

www.insigniaproducts.com

Turning on your TV for the first

time

The first time you turn on your TV, the Easy Setup wizard

opens. The wizard guides you through setting up basic

settings including the menu language, time setting,

picture mode, TV signal source, and the channel list.

1 Make sure that you have:

• Installed the remote control batteries.

• Connected an antenna, cable TV, or satellite TV. (See

page 8 through page 9.)

2 Press (power) to turn on your TV. The Easy Setup

wizard opens.

3 Press  or  to highlight a language, then press

ENTER.

4 Press  or  to select Yes (to turn on the Voice Guide)

or No (to turn off the Voice Guide), then press ENTER.

5 Press  or  to highlight Home Use Mode or Store

Display Mode, then press ENTER.

If you selected Store Display Mode, a message asks if

you are sure you want this mode. Select OK to continue

using Store Display Mode, or select Cancel to change

to Home Use Mode. Store Display Mode is not an

energy savings mode.

6 Press  or  to highlight an option, then press ENTER.

You can select:

• Watch TV to skip the customization options. You can

press MENU later to customize settings. Go to Finish

the wizard on page 17.

• Customize my TV to set options to maximize your

experience. Go to Customize my TV on page 16.

Customize my TV

7 Press  or  to highlight a time zone, then press

ENTER.

Insignia LED TV

www.insigniaproducts.com

8 Press  or  to select On to turn on Daylight Saving

or Off to turn off Daylight Saving, then press ENTER.

9 Press  or  to highlight Month, Day, or Year, press 

or  to adjust the setting, then press ENTER one or

more times to highlight Next. When Next is

highlighted, press ENTER again.

10 Press  or  to highlight Hour, Minute, or the AM/PM

field, press  or  adjust the option, then press ENTER

one or more times to highlight Next. When Next is

highlighted, press ENTER again.

11 Press  or  to highlight a video input source, then

press  to move to the label area.

12 Press  or  to highlight a preset label or Custom.

13 If you select a preset label, press  to select Next, then

press ENTER.

If you select Custom, press ENTER, then press  or 

to enter the first character in your custom label. Press 

or  to move to the previous or next character position.

Use the arrow buttons to enter additional characters.

You can enter 12 characters (letters or numbers). When

you have finished creating your label, press ENTER,

press  to select Next, then press ENTER again.

Finish the wizard

14 Press  or  to highlight Cable/Satellite Box, Cable

from the wall, or Antenna, then press ENTER.

• If you select Cable/Satellite Box, the screen that

opens shows you the ways you can connect the box.

Press ENTER.

Insignia LED TV

www.insigniaproducts.com

• If you select Cable from the wall or Antenna your

TV starts scanning for channels and displays a

progress screen.

15 Press ENTER to close the wizard. If you selected:

• Cable from the wall or Antenna, your TV tunes to

the first channel it found in the scan.

• Cable/Satellite box, press INPUT to open the INPUT

SOURCE list, press  or  to select the video input

(HDMI or AV) you connected the box to, then press

ENTER. Your TV switches to the input you selected.

Understanding the basics

This section covers basic information for:

• Turning your TV on or off

• Selecting the video input source

• On-screen menu overview

• Navigating the menus

• Selecting a channel

• Adjusting the volume

• Viewing channel information

Turning your TV on or off

1 Make sure that the power cord is connected to a power

outlet.

2 Press (power) to turn on your TV. The power

indicator turns off.

3 Press (power) again to turn off your TV. Your TV

enters standby mode, and the power indicator turns

red.

Note: You can press EXIT to stop the auto channel search, but

you will need to run the auto channel search again to create a

channel list.

WARNING: When your TV is in standby mode, it is still

receiving power. To completely disconnect power, unplug the

power cord.

Note:

If your TV does not receive an input signal for several

minutes, it automatically goes into standby mode.

Insignia LED TV

www.insigniaproducts.com

Selecting the video input source

1 Turn on your TV.

2 If you want to use a device connected to a video input

(such as a DVD or Blu-ray player), turn on the device.

3 Press INPUT, then select a video input source.

On-screen menu overview

Picture menu (TV mode)

Audio menu (TV mode)

Channels menu (TV mode)

Settings menu (TV mode)

Accessibility menu

Help menu

PHOTOS menu (USB mode)

Note: Your TV automatically detects and displays which video

jacks have devices connected to them when the devices are

turned on. You can turn this feature off to always display all

inputs. See Adjusting menu settings on page 30.

Notes:

• Depending on the signal source selected, you may see

different options on your screen.

• Menu items that are not selectable are grayed out.

Insignia LED TV

www.insigniaproducts.com

Selecting a channel

• Press CH or CH to go to the next or previous

channel on the memorized channel list.

• Press the number buttons to enter the channel number

you want, then wait for the channel to change or press

ENTER to immediately change the channel.

• To select a digital sub-channel, press the number

buttons to select the main digital channel, press

(sub-channel), then press the number button for the

sub-channel. Wait for the channel to change, or press

ENTER to immediately change the channel. For

example, to tune to channel 5.1, press 5,

(sub-channel), then 1.

• Press (return) to go to the last viewed channel.

Adjusting the volume

• Press VOL+ or VOL– to increase or decrease the

volume.

• Press MUTE to turn off the sound. Press MUTE again to

turn the sound back on.

Viewing channel information

• Press INFO* to view an information banner. The

information banner shows the current program

information, such as channel number, video input

source, and resolution.

• Digital channel information—Displays the channel

number, station name, channel label, broadcast

program name, TV rating, signal type, audio

information, resolution, current time, signal

strength, day of the week, date, and current program

start and end times, if provided by the broadcaster.

• Analog channel information—Displays channel

number, channel label (if present), signal type, audio

information, day of the week, date, and resolution, if

provided by the broadcaster.

Navigating the menus

Note: Button presses must be within three seconds of each

other.

Press MENU to open the on-screen menu.

Press the right or left arrow to move the cursor on

the screen or to adjust a selected item.

Press the up or down arrow to select menu options.

Press ENTER to confirm a selection or enter a

sub-menu.

Press MENU to return to the previous menu.

Press EXIT to close the menu.

Insignia LED TV

www.insigniaproducts.com

Adjusting settings

1 Press MENU to open the on-screen menu.

2 Press  or  to highlight a menu, then press ENTER.

3 Press  or  to select an option, then press ENTER. If

the menu has more options than it can display on a

screen, use the  to view the other options.

4 If a sub-menu opens, press  or  to select an option,

then press ENTER. If the menu has more options than it

can display on a screen, use the  to view the other

options.

5 Use the arrow buttons to adjust the option setting,

then press ENTER.

6 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Using INlink

INlink lets you control HDMI CEC-compatible devices

connected to the HDMI jacks on your TV using the remote

control that came with your TV.

To use INlink, you must set the INlink Control option on

the INlink menu to On.

1 Select the SETTINGS menu, then select

INlink(HDMI-CEC).

2 Select an option, then adjust the setting. You can

select:

• INlink Control—Turns the INlink feature on or off. You

must set this option to On to use the other INlink

options.

• Device Auto Power Off—Automatically turns off

HDMI CEC devices when you turn off your TV.

• TV Auto Power On—Automatically turns on your TV

when an HDMI CEC device is turned on, if the device

has this feature.

• Audio Receiver—Lets you use your TV’s remote

control to control the volume on an HDMI

CEC-compatible audio receiver connected to your TV.

• INlink Device List—Lets you display a list of HDMI CEC

devices that are connected to your TV.

• Connect—When you have more than one

INlink-compatible device connected, lets you select the

device you want to use.

• Root Menu—Lets you open an INlink-compatible

device’s root menu, then use your TV’s remote control

to control the device, if the device has this feature.

3 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Note: You can use the media buttons on your remote control

to control playback.

Notes:

• HDMI cables must be used to connect HDMI

CEC-compatible devices to your TV.

• The connected device’s HDMI CEC feature must be turned

on.

• If you connect an HDMI device that is not HDMI

CEC-compatible, none of the INlink Control features work.

• Depending on the connected HDMI device, some INlink

Control features may not work.

Insignia LED TV

www.insigniaproducts.com

Using a USB flash drive

You can connect a USB flash drive to your TV to view

compatible JPEG pictures.

Switching to USB mode

1 Make sure that you have connected the USB flash drive

to the USB port on your TV.

2 Press  or  to highlight Ye s in the message that

appears, then press ENTER.

If you connected the USB flash drive, then changed to a

different video input source, press INPUT, select

USB(Photos), then press ENTER.

3 Select one of the following options:

• Browse Photos

• Start Slideshow

Browse Photos

Browse Photos displays folder names and photo files

stored on the USB flash drive in a thumbnail index with the

first folder or file highlighted. A control bar appears at the

bottom of the screen.

To navigate the thumbnail index screen, press:

When a photo is displayed full-screen, a control bar

appears at the bottom of the photo. The file name,

picture resolution, size, and date are displayed on the

bottom of the control bar. If you do not press a button

within eight seconds, the control bar closes. Press

INFO* to open the control bar again.

Notes:

• Never remove the USB flash drive or turn off your TV while

viewing JPEG pictures.

• The JPEG picture viewer only supports JPEG format images

(with “.jpg” file extensions) and not all JPEG files are

compatible with your TV.

Note:

To exit USB mode, press INPUT, then select another

input source.

Note: Photos are shown in the order they appear on the USB

flash drive. They may not be listed in file name order.

PRESS... TO...

   or  Browse through the files and folders.

ENTER View a highlighted photo full-screen or

open a highlighted folder.

MENU or EXIT Open the PHOTOS menu.

Insignia LED TV

www.insigniaproducts.com

To navigate on the photo screen, press:

Start Slideshow

Start Slideshow displays photos in a slideshow. If the

photos you want to view are in a folder on the USB flash

drive, select the folder.

To control the slideshow:

Adjusting the picture

This section covers:

• Adjusting the TV picture

• Automatically adjusting the aspect ratio

• Setting the power on picture mode

Adjusting the TV picture

You can adjust various settings to improve the quality of

the TV picture. Also, you can reset all picture settings to the

factory default.

1 Select the PICTURE menu.

2 Select an option, then adjust the setting. You can

select:

• Picture Mode—Selects the picture mode. You can

select:

• Vivid—(a bright and vivid picture). Significantly

increases the contrast, brightness, and sharpness.

This selection is good for video games, animation,

and in bright light environments.

• Standard—(a standard picture). Moderately

increases the contrast, brightness, and sharpness.

This selection is good for standard TV broadcasts.

• Energy Savings—(the backlight brightness is

decreased). Your TV has a backlight that provides

light for displaying a picture. By reducing the

amount of light, your TV uses less energy.

• Movie—(a finely detailed picture). Adjusts the

brightness and contrast and lowers the sharpness

for a more realistic picture. This selection is good for

watching the highest quality video such as Blu-ray

Discs, DVDs, and HDTV.

• Game—Adjusts the picture for the ultimate gaming

experience.

• Custom—(customized picture). Lets you manually

adjust picture settings, such as brightness, contrast,

and sharpness.

• Advanced Settings—Opens the Advanced Settings

menu where you can adjust additional video options.

PRESS... TO...



Go to the previous photo.



Go to the next photo.

ENTER Rotate the photo clockwise.

ASPECT Enlarge the image by 2×, or 4× or to select

Fill (to fill the screen). You can press   

or  to pan the photo.

EXIT Return to the thumbnail index.

MENU Return to the PHOTOS menu.

PRESS... TO...

MENU Open the PHOTOS menu.

ENTER Pause the slideshow. Press again to

resume the slideshow.

EXIT Stop the slideshow and return to the

thumbnail index.

Notes:

• You can also press GAME to select game mode.

• Game is only available when the video input is set to HDMI

or AV.

Note: You can also press PICTURE to select the picture mode.

Insignia LED TV

www.insigniaproducts.com

• Aspect Ratio—Adjusts how the picture fills the

screen. You can select:

• OverScan—Extends text and images past the

screen edges to hide edge artifacts. You can select

On or Off.

• Dynamic Backlight—Enhances the contrast ratio

between light and dark areas of the picture. You can

select Off, Low, or High.

• Color Temperature—Selects the color temperature.

You can select Cool (to enhance the blues), Normal,

or Warm (to enhance the reds).

• Noise Reduction—Selects the noise reduction

mode to reduce picture noise (snow). You can select

Off, Low, Middle, or High.

• Dynamic Contrast—Automatically adjusts picture

detail and brightness. You can select On or Off.

• Backlight—Sets the overall brilliance of the screen.

• Brightness—Adjusts the brightness of the dark areas

of the picture.

• Contrast—Adjusts the brightness of the light areas of

the picture.

• Color—Adjusts the color intensity of the picture. A low

setting may make the color look faded. A high setting

may make the color look artificial.

• Tint—Adjusts the color balance of the picture. Use this

control to make skin tones look more natural.

• Sharpness—Adjusts the color detail of images. If you

set this control too high, dark images may appear with

light or white edges.

• Reset Picture Settings—Resets all picture settings to

factory mode.

3 Press MENU to return to the previous menu, or press

EXIT to close the menu.

ASPECT RATIO

OPTIONS

EXAMPLE

Normal:

Displays the image in the

original aspect ratio. You

may see black bars if the

original content is not

widescreen (16:9).

Zoom:

Expands the image to fill

the screen. The top and

bottom of the image may be

cropped.

Wide:

Use this option to view

content recorded in a

widescreen (16:9) aspect

ratio.

Cinema:

Stretches the image at the

edges, but keeps a clear

image in the center.

Auto:

Automatically adjusts the

image based on the screen

size and the TV program.

Select this option if you do

not know which aspect ratio

to choose.

Note: Auto is only

available when Auto

Aspect Ratio in the

Channels menu is set to On.

Insignia LED TV

www.insigniaproducts.com

Automatically adjusting the aspect ratio

Auto Aspect Ratio automatically changes how the picture

looks on the screen (aspect ratio) based on the TV program

you are viewing.

1 Select the CHANNELS menu.

2 Select Auto Aspect Ratio, then select On

(automatically adjust the aspect ratio) or Off (does not

automatically adjust the aspect ratio).

3 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Setting the power on picture mode

You can set the picture mode your TV uses when you turn

it on.

1 Select the HELP menu, then select Power on in Vivid

Mode.

2 Select On (when you turn on your TV, it will be in Vivid

picture mode) or Off (when you turn on your TV, it will

be in the picture mode it was in before you turned it

off).

3 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Adjusting the sound

This section covers:

• Adjusting sound settings

• Selecting the audio out mode

• Playing TV audio only

Adjusting sound settings

You can adjust sound settings to improve the sound

quality. You also can reset all sound settings to the factory

default.

1 Select the AUDIO menu.

2 Select an option, then adjust the setting. You can

select:

• Audio Mode—Selects the sound mode. You can select:

• Standard—Balances treble and bass. This setting is

good for watching standard TV broadcasts.

• Theater—Enhances treble and bass for a rich sound

experience. This setting is good for watching DVDs,

Blu-ray discs, and HDTV.

• Music—Preserves the original sound. This setting is

good for listening to music.

• News—Enhances vocals for TV audio. This setting is

good for watching news broadcasts.

• Custom—Lets you manually adjust sound settings.

• Balance—Adjusts the balance between the left and

right audio channels.

• Bass—Adjusts the low sounds.

• Treble—Adjusts the high sounds.

• TV Speakers—Selects where to play TV audio. When

you connect headphones to your TV, audio plays

through both the headphones and the TV speakers.

You can select:

• Auto (default setting)—Automatically turns off the

TV speakers when you connect a device to the

/ AUDIO OUT jack. When you disconnect the

device, the TV speakers turn on automatically.

• On—Always plays the audio through the TV

speakers. If a device is connected to the

/ AUDIO OUT jack, the audio is played through

both the TV speakers and the device.

• Off—Turns off the TV speakers and plays the audio

only through the device connected to the

/ AUDIO OUT jack. If you disconnect the device,

the TV speakers remain turned off.

Note: You can also press AUDIO to select the audio mode.

Insignia LED TV

www.insigniaproducts.com

• Digital Audio Format/Audio Delay—Adjusts the

digital audio sent to an external audio system. You can

select:

• Audio Format—Selects the digital audio format

sent to an external audio system. You can select:

• Pass Thru (to pass through the original digital

audio sound).

• PCM (to output audio in 2-channel stereo).

• Audio Delay—Fine tunes the audio when it is not in

sync with the video.

• MTS/SAP—(Analog channels only) Selects the audio

mode. You can select:

• Mono—Select this option if there is noise or static

on weak stereo broadcasts.

• Stereo—Select this option for programs broadcast

in stereo.

• SAP—Select this option to listen to a secondary

audio program, if available.

• Audio Language—(Digital channels only) Selects an

alternate audio language, if available.

• Headphones / Audio Out—You can use the

/ AUDIO OUT jack on your TV to connect

headphones, a home theater system, soundbar, or

external speaker system. When a device is connected

to the / AUDIO OUT jack, the TV speakers are

muted. You can select:

• Headphones/Audio Out Variable—Select this

option to use the remote control that came with

your TV to control the audio from headphones, a

home theater system, a soundbar, or an external

speaker system you connected to the

/ AUDIO OUT jack.

• Audio Out Fixed—Select this option to use the

remote control that came with the home theater

system, soundbar, or external speaker system you

connected to the / AUDIO OUT jack to control the

audio.

• Reset Audio Settings—Reset all audio settings to

factory defaults.

3 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Selecting the audio out mode

If your TV is on when you connect a device to the

/ AUDIO OUT jack on your TV, a screen opens where

you select which audio out mode you want to use.

1 Connect headphones, a home theater system,

soundbar, or external speaker system to the

/ AUDIO OUT jack on your TV.

2 Select an audio out mode. You can select:

• Headphones / Audio Out Variable—Select this

option to use the remote control that came with

your TV to control the audio from headphones, a

home theater system, or a soundbar you connected

to the / AUDIO OUT jack.

• Audio Out Fixed—Select this option to use the

remote control that came with the home theater

system, soundbar, or external speaker system you

connected to the / AUDIO OUT jack to control the

audio.

Playing TV audio only

You can turn off the picture on your TV and listen to the

program audio only.

1 Select the CHANNELS menu, then select Audio Only.

2 Select On.

3 Press MENU, ENTER, or  to return to the previous

menu, or press EXIT to close the menu.

Notes:

• The picture turns off in about five seconds.

• Audio Only works only when the input source is TV, and

your TV is receiving a broadcast signal.

• To exit audio only mode, press any button. When you exit

audio only mode, the Audio Only option is automatically

reset to Off.

Insignia LED TV

www.insigniaproducts.com

Changing channel settings

You can scan for channels, control which channels are

displayed, set up and view favorite channels, change

channel labels, and check a digital channel’s signal

strength.

1 Select the CHANNELS menu.

2 Select an option, then adjust the setting. You can

select:

• Auto Channel Search—Lets you scan for channels

with signals. Your TV stores the channel information in

the channel list. When you press CH or CH , your

TV goes to the next or previous channel in the channel

list. You should scan for channels if the TV signal source

changes, for example you change from an outdoor

antenna to cable TV (no box). You can select

Cable / Satellite Box, Cable from the wall, or

Antenna.

• Add/Skip Channels—Lets you hide channels in the

channel list. When you press CH or CH , your TV

skips the hidden channels. You can still tune to a

hidden channel by pressing the number buttons for

the channel.

• Favorite Channel Setup—Lets you create a list of

favorite channels so you can quickly browse through

your favorite channels.

• Favorite Channel List—Lets you select a channel from

the favorite channel list.

• Channel Labels—Lets you add or change a channel

label to make it easier to identify the channel.

• Channel Strength—Lets you check the digital signal

strength to determine if you need to adjust your

antenna or digital cable input. The higher the signal

strength, the less likely you are to experience picture

degradation.

3 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Setting parental controls

Parental controls let you prevent your children from

watching inappropriate material on TV. When set, parental

controls read the rating of the program (with some

exceptions, such as news and sports) and deny access to

programs that exceed the ratings level you select. To watch

programs that exceed the selected rating, you must enter a

password.

1 Select the SETTINGS menu, then select Parental

Controls.

2 Use the number buttons to enter your parental controls

password. The default password is 0000.

Notes:

• If you have a cable or satellite box, you do not need to scan

for channels.

• You can press EXIT to stop the auto channel search, but you

will need to run the auto channel search again to create a

channel list.

Notes:

• If you highlight a channel in the list, your TV displays the

channel in the background.

• A channel with a filled circle to the left is not hidden. A

channel with an empty circle to the left is hidden.

• If the list has more than one page, press

 or  to scroll

through the pages.

Notes:

• If you highlight a channel in the list, your TV displays the

channel in the background.

• To remove a channel from the favorites list, highlight the

channel, then press ENTER. The filled circle is replaced with

an empty circle and the channel is removed from the list.

• If the list has more than one page, press

 or  to scroll

through the pages.

Note: You can also press FAVORITE to select a channel.

Notes:

• You should change the default password to a number you

can remember.

• If you forget your password, enter 9999.

Insignia LED TV

www.insigniaproducts.com

3 Select an option, then adjust the setting. You can

select:

• Block Unrated TV—Some TV programs, such as news

and sports shows are not rated. When Block Unrated

TV is turned on, TV programs that do not have ratings

are blocked. When you try to watch a blocked program,

you are prompted to enter the parental controls

password.

• USA Parental Locks—Lets you block U.S. TV shows

based on ratings and content types and movies based

on MPAA ratings.

• Canadian Parental Locks—Lets you block Canadian

TV shows based on ratings and content types.

Note: When you block a rating, that rating and all higher

ratings are blocked.

U.S. TV RATINGS

NONE Not rated

TV-Y All children

TV-Y7 Suitable for children 7 and older

TV-G General audiences

TV-PG Parental guidance suggested

TV-14 Parental guidance strongly suggested

TV-MA Mature audiences only

U.S. TV CONTENT RATINGS

All All ratings are blocked

FV Fantasy violence

L Strong language

S Sexual situations

V Violence

D Suggestive dialog

U.S. MOVIE (MPAA) RATINGS

None Movie not rated

G General audiences

PG Parental guidance suggested

PG-13 Suitable for children 13 and older

R Parental guidance suggested for children

under 17

NC-17 Not suitable for children under 17

X Adults only

Note: When you block a rating, that rating and all higher

ratings are blocked.

CANADIAN ENGLISH RATINGS

E Exempt programming

C Suitable for all children

C8+ Suitable for children 8 and older

G General audiences

PG Parental guidance suggested

14+ Suitable for children 14 and older

18+ Adult only

CANADIAN FRENCH RATINGS

E Exempt programming

Insignia LED TV

www.insigniaproducts.com

Locking the power button on your TV

When the button lock is turned On, the power button on

your TV is locked, and you can only turn your TV on or off

or change the video input source using the remote control.

1 Select the SETTINGS menu, then select Button Lock.

2 Select On (locks the power button) or Off (unlocks the

power button).

3 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Using closed captioning

Closed captioning displays a text version of the TV

program audio or displays information provided by the

broadcaster.

You can turn closed captioning on or off, select the analog

or digital captioning mode, and change the style of the

digital captioning display.

1 Select the ACCESSIBILITY menu, then select Closed

Caption.

2 Select an option, then adjust the setting. You can

select:

• Caption Control—Turns captioning on or off. You can

select CC Off (turns off closed captioning), CC On

(turns on closed captioning), or CC on when mute

(turns on closed captioning when the sound is muted).

• Analog Caption—Lets you select the captioning

mode for analog channels.

The CC1 mode usually displays a text version of the TV

program audio in a small banner. The other CC modes

display information provided by the broadcaster. You

can select CC1 through CC4.

The Tex t modes display information in a box that

covers half of the screen. You can select Text1 through

Text4.

• Digital Caption—Lets you select the captioning mode

for digital channels. Digital channels usually have one

or more closed captioning modes. The CS1 mode

usually displays a text version of the TV program audio

in a small banner. The other CS modes display

information provided by the broadcaster. You can

select CS1 through CS6.

• Digital CC Settings—Lets you customize how the

digital captioning appears on the screen. Set Style to

Custom, then select a style and adjust the setting.

3 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Adjusting time settings

You can set the clock or turn on the sleep timer.

1 Select the SETTINGS menu, then select Time.

2 Select an option, then adjust the setting. You can

select:

• Date/Time—Lets you set the time zone, date, and

time.

If you skipped the steps in the Easy Setup wizard for

setting the date and time or if you move your TV to a

different time zone, you need to reset the clock to the

correct time.

• Sleep Timer—Let you specify the amount of time

before your TV automatically turns off. You can select

Off, 5, 10, 15, 30, 60, 90, 120, 180, or 240 minutes.

3 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Note: You can also press CC to turn closed captioning on, off,

or on when mute.

Note: You can also press SLEEP to set the sleep timer.

Insignia LED TV

www.insigniaproducts.com

Adjusting menu settings

You can adjust how the TV menus look by:

• Selecting the menu language

• Turning the Input Sensor on or off

• Labeling an input source.

1 Select the SETTINGS menu.

2 Select an option, then adjust the setting. You can

select:

• Menu Language—Your TV can display the on-screen

menu in English, French, or Spanish. When you set up

your TV for the first time, you selected the language.

You can change the menu language to a different

language.

• Auto Input Sensing—When the Input Sensor feature

is turned on, your TV automatically detects which

video jacks have devices connected to them and

turned on. Your TV uses this information to determine

what options you can select on the INPUT SOURCE list

when you press INPUT.

• Input Labels—You can add a label to an input source

to make it easier to identify. The next time you press

INPUT, your label appears in the INPUT SOURCE list.

3 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Adjusting accessibility settings

Your TV provides audio descriptions of menus and some

remote control functions. Depending on the broadcaster,

audio narration of key elements in programs may also be

available.

1 Select the ACCESSIBILITY menu.

2 Select an option, then adjust the setting. You can

select:

• Voice Guide—Audibly narrates menu selections and

some remote control functions. You can select On or

Off.

• Closed Caption—Displays a text version of the TV

program audio or displays information provided by the

broadcaster. See Using closed captioning on page 29

for instructions about using closed captioning features.

• Audio Language—(Digital channels only) Selects an

alternate audio language, if available.

• Video Description—Audibly narrates key visual

elements in TV programs (not available on all

broadcasts). You can select On or Off.

• Learn How To Use Remote Control—Provides

information about using the remote control.

• Reset Accessibility Settings—Resets all accessibility

settings to factory mode.

3 Press MENU to return to the previous menu, or press

EXIT to close the menu.

Maintaining

• Do not use your TV in areas that are too hot or too cold,

because the cabinet may warp or the screen may

malfunction. Your TV works best in temperatures that

are comfortable to you.

• Storage temperatures are 32° to 122°F (0° to 50°C).

• Working temperatures are 41° to 104°F (5° to 40°C).

• Do not place your TV in direct sunlight or near a heat

source.

Cleaning the TV cabinet

Clean the cabinet with a soft, lint-free cloth. If the cabinet

is especially dirty, moisten a soft, lint-free cloth in a weak

detergent solution, squeeze the excess moisture from the

cloth, then wipe the cabinet with the cloth. Use a clean

cloth to dry the cabinet.

Cleaning the TV screen

Clean the screen with a soft, lint-free cloth.

Note: The Voice Guide option is only available in the English

language.

Notes:

• The Voice Guide option is only available in the English

language.

• For more information about accessibility, call Customer

Care at 1-877-467-4289 (U.S. and Canada) or

01-800-237-8289 (Mexico).

Insignia LED TV

www.insigniaproducts.com

Troubleshooting

Use the following troubleshooting information to solve

common problems.

Troubleshooting topics include:

• Using the HELP menu

• Video and audio problems

• Remote control problems

• General problems

• INlink (CEC-compatible) device problems

Using the HELP menu

The HELP menu provides information about frequently

asked questions.

1 Select the HELP menu.

2 Select an option. You can select:

• System Info—Displays system information during

troubleshooting. If your TV uses open source code,

press ENTER to display the open source code

information.

• Learn More—Displays remote control codes and

information about connecting a soundbar.

• Update Firmware—If your TV is behaving oddly and

you have tried all the solutions in the troubleshooting

pages, lets you update your TV’s firmware. To update

the TV firmware, you need a:

• Computer with an available USB port

• High-speed Internet connection

• USB flash drive

• Customize my TV—If you did not complete the

customization part of the Easy Setup wizard the first

time you turned on your TV, run the wizard again to

customize settings.

• TV Speaker Test—Tests your TV’s speakers to make

sure that they are working correctly.

• Reset to Default—Resets all settings (except parental

controls) to the factory defaults and runs the Easy Setup

wizard. See Turning on your TV for the first time on

page 16.

Video and audio

CAUTIONS:

• Make sure that you have tried all other solutions before you

upgrade the firmware.

• While the firmware is updating, do not turn off your TV.

Notes:

• Firmware updates may not be available for your model.

• If you see a message that says the firmware file is incorrect,

make sure that you have downloaded the correct file for

your model.

• If you see a message that says the update failed or the TV

screen is blank and the power LED blinks red then blue, turn

your TV off and on, then run the upgrade again.

PROBLEM SOLUTION

Picture does not fill the screen. There are

black bars around the picture.

• Change the aspect ratio. See the Aspect Ratio option in Adjusting the

TV picture on page 23.

No picture (screen is not lit) and no sound.

• Press on the TV or the remote control.

• Make sure that the Audio Only option is set to Off. See Playing TV

audio only on page 26.

• Make sure that the video cables are connected correctly and securely to

your TV.

• Adjust the contrast and brightness. See Adjusting the TV picture on

page 23.

• Make sure that the power cord is plugged into a working outlet.

• Press INPUT and make sure that the correct video input source is

selected. See Selecting the video input source on page 19.

• Try another channel. The station may be experiencing problems.

• Make sure that the incoming signal is compatible.

• Make sure that the antenna or cable TV is connected correctly and

securely. See Connecting a cable or satellite box on page 8 or

Connecting an antenna or cable TV (no box) on page 9.

• Check the closed caption settings. Some TEXT modes can block the

screen. See Using closed captioning on page 29.

Insignia LED TV

www.insigniaproducts.com

Dark, poor, or no picture (screen is lit), but

sound is good.

• Try another channel. The station may be experiencing problems.

• Make sure that the antenna or cable TV is connected correctly and

securely. See Connecting a cable or satellite box on page 8 or

Connecting an antenna or cable TV (no box) on page 9.

• Adjust the brightness. See Adjusting the TV picture on page 23.

• Press PICTURE to change to a different picture mode. See Adjusting the

TV picture on page 23.

• If you are using an antenna, the digital channel signal may be low. To

check the digital channel signal strength, see the Channel Strength

option in Changing channel settings on page 27.

• If you are using an antenna and the signal strength is low, adjust the

antenna or use a highly directional outdoor antenna or set-top antenna

with a built-in amplifier.

• Make sure that the video cables are connected correctly and securely to

your TV.

• The video cable(s) you are using may be bad. Try a new set.

No color, dark picture, or color is not

correct.

• Try another channel. The station may be experiencing problems.

• Adjust the color settings. See Adjusting the TV picture on page 23.

• Make sure that the video cables are connected correctly and securely to

your TV.

• Make sure that the antenna or cable TV is connected correctly and

securely. See Connecting a cable or satellite box on page 8 or

Connecting an antenna or cable TV (no box) on page 9.

• If you are using an antenna, the digital channel signal may be low. To

check the digital channel signal strength, see Channel Strength option

in Changing channel settings on page 27.

• If you are using an antenna and the signal strength is low, adjust the

antenna or use a highly directional outdoor antenna or set-top antenna

with a built-in amplifier.

Only snow (noise) appears on the screen.

• Try another channel. The station may be experiencing problems.

• Make sure that the antenna or cable TV is connected correctly and

securely. See Connecting a cable or satellite box on page 8 or

Connecting an antenna or cable TV (no box) on page 9.

• If you are using an antenna, the digital channel signal may be low. To

check the digital channel signal strength, see Channel Strength option

in Changing channel settings on page 27.

• If you are using an antenna and the signal strength is low, adjust the

antenna or use a highly directional outdoor antenna or set-top antenna

with a built-in amplifier.

Picture quality is good on some channels

and poor on others. Sound is good.

• The problem may be caused by a poor or weak signal from the

broadcaster or cable TV provider.

• If you connect to cable TV without a set-top box and experience poor

picture quality, you may need to install a set-top box to improve signal

reception and picture quality. Contact your cable TV provider about

upgrading to a set-top box.

PROBLEM SOLUTION

Insignia LED TV

www.insigniaproducts.com

Dotted lines or stripes appear on the

screen.

• Make sure that the antenna or cable TV is connected correctly and

securely. See Connecting a cable or satellite box on page 8 or

Connecting an antenna or cable TV (no box) on page 9.

• If you are using an antenna, the digital channel signal may be low. To

check the digital channel signal strength, see Channel Strength option

in Changing channel settings on page 27.

• If you are using an antenna and the signal strength is low, adjust the

antenna or use a highly directional outdoor antenna or set-top antenna

with a built-in amplifier.

• Make sure that the video cables are connected correctly and securely to

your TV.

• The video cable(s) you are using may be bad. Try a new set.

• Other devices (for example, a surround sound receiver, external

speakers, fans, or hair dryers) may be interfering with your TV. Try

turning off one device at a time to determine which device is causing

interference. After you have determined which device is causing

interference, move it further from the TV to eliminate the interference.

The picture has a few bright or dark spots.

• A few bright or dark spots on an LCD screen is normal. It does not affect

the operation of your TV.

Video description or voice guide does not

work.

• Make sure that your TV is not muted and the volume is turned up.

• Make sure that the options listed under the Accessibility menu are

turned on. See Adjusting accessibility settings on page 30.

• Video descriptions are not available on all broadcasts.

• Some remote functions are not narrated.

Good picture, but no sound.

• Increase the volume.

• Make sure that the sound is not muted.

• Make sure that you do not have headphones connected. When

headphones are connected, no sound comes from the TV speakers.

• Change to a different audio mode. See the Audio Mode option in

Adjusting sound settings on page 25.

• If you are using a home theater system, soundbar, or external speaker

system, make sure that it is turned on and is not muted.

• If you are using a home theater system, soundbar, or external speaker

system, make sure that you have selected the correct output mode.

• If you are using a home theater system, soundbar, or external speaker

system and have connected it with a digital audio cable, select Digital

Audio Format/Audio Delay on the Audio menu, then set Audio

Format to PCM. See the Digital Audio Format/Audio Delay option in

Adjusting sound settings on page 25.

• Make sure that the audio cables are connected correctly and securely to

your TV.

• Make sure that the antenna or cable TV is connected correctly and

securely. See Connecting a cable or satellite box on page 8 or

Connecting an antenna or cable TV (no box) on page 9.

• If you are using an antenna, the digital channel signal may be low. To

check the digital channel signal strength, see Channel Strength option

in Changing channel settings on page 27.

• If you are using an antenna and the signal strength is low, adjust the

antenna or use a highly directional outdoor antenna or set-top antenna

with a built-in amplifier.

• The audio cables you are using may be bad. Try a new set.

Poor picture.

• Make sure that the room is not too bright. Light reflecting off the screen

can make the picture difficult to see.

• If an S-VHS camera or a camcorder is connected while another

connected device is turned on, the picture may be poor. Turn off one or

more devices.

Good sound, but poor color.

• Adjust the contrast, color, and brightness settings. See Adjusting the TV

picture on page 23.

PROBLEM SOLUTION

Insignia LED TV

www.insigniaproducts.com

Remote control

Audio noise.

• Other devices (for example, a surround sound receiver, external

speakers, fans, or hair dryers) may be interfering with your TV. Try

turning off one device at a time to determine which device is causing

interference. After you have determined which device is causing

interference, move it further from the TV to eliminate the interference.

No output from one of the speakers.

• Adjust the audio balance. See Adjusting sound settings on page 25.

• Test the TV’s speakers. See the TV Speaker Test option in Using the

HELP menu on page 31. If one or both of the speakers fails, try one of

the following solutions:

• Make sure that the audio cables are connected correctly and securely

to your TV.

• Make sure that the audio cables are connected to the AUDIO OUT

jacks on the connected device.

• Try a different set of audio cables.

• Make sure that the sound on the connected device is not muted.

• Try connecting the device to a different TV. If you do not hear sound,

the problem is with the device.

After images appear.

• Do not display a still image, such as a logo, game, or computer image,

for an extended period of time. This can cause a permanent after-image

to be burned into the screen. This type of damage is not covered by

your warranty.

PROBLEM SOLUTION

Remote control does not work.

• Make sure that the power cord is plugged into a working outlet.

• Make sure that there are no obstructions between the remote control

and the remote control sensor on the front of the TV.

• Point the remote control directly at the remote control sensor on your

TV.

• The supplied batteries are wrapped tightly in clear plastic. Make sure

that you have removed this plastic from the batteries.

• Make sure that the batteries are installed correctly.

• Replace dead batteries with new batteries.

Trouble programming your existing

universal remote control.

• See instructions in Programming universal remote controls on page 15.

• Codes are subject to change. For up-to-date codes, go to

Viewing universal remote control codes on page 15 or visit

www.insigniaproducts.com/remotecodes

• Replace dead batteries with new batteries.

• Refer to the User Guide that accompanied your universal remote

control and contact the manufacturer if problems persist.

PROBLEM SOLUTION

Insignia LED TV

www.insigniaproducts.com

General

PROBLEM SOLUTION

No power.

• Make sure that the power cord is plugged into a working outlet.

• Unplug the power cord, wait 60 seconds, then plug the cord back in

and turn on your TV.

• Other devices (for example, a surround sound receiver, external

speakers, fans, or hair dryers) may be interfering with your TV. Try

turning off one device at a time to determine which device is causing

interference. After you have determined which device is causing

interference, move it further from the TV to eliminate the interference.

“No signal” error message is displayed.

• Press INPUT and make sure that you have selected the correct input for

the device or service you are trying to use.

• If you are using a cable or satellite box, use the remote that came with

that box to change channels.

After Auto Channel Search, there are no

channels.

• Reception can vary by channel depending on the broadcast power

level of a given station. Contact your cable or satellite TV provider.

• Make sure that the antenna or cable/satellite TV is connected securely

to your TV.

• Try replacing the cable between the antenna/cable or cable/satellite

box and your TV.

When I press INPUT, I cannot select my

device (it is grayed out).

• Turn on the device. Your TV automatically detects and displays which

video jacks have devices connected to them when the devices are

turned on.

• Turn off Auto Input Sensing. See Adjusting menu settings on page 30.

One or more channels do not display.

• Make sure that the channels are not blocked. See Setting parental

controls on page 27.

• Make sure that the channels are not hidden. The channel may have

been deleted from the channel list. You can tune to the channel by

pressing the number buttons or you can add the channel back to the

channel list. See the Add/Skip Channels option in Changing channel

settings on page 27.

• If you are using a cable or satellite box, use the remote that came with

that box to change channels.

• Press INPUT and make sure that you have selected the correct input for

the device or service you are trying to use.

• If you are using an antenna, the digital channel signal may be low. To

check the digital channel signal strength, see the Channel Strength

option in Changing channel settings on page 27.

Password is lost.

• Enter 9999 to access parental controls, then set a new password. See

the Change Password option in Changing channel settings on

page 27.

Some settings cannot be accessed.

• If a setting is grayed, the setting is not available in the current video

input mode (for example TV mode). Change to a different video input

source. See Selecting the video input source on page 19.

TV cabinet creaks.

• When the TV is in use, the temperature rises naturally and may cause

the cabinet to expand or contract which can cause a creaking noise.

This is not a malfunction.

button does not work.

• Make sure that the Button Lock option is set to Off. See Locking the

power button on your TV on page 29.

• Unplug the power cord, wait a few seconds, then plug the cord back in

and turn on your TV.

Insignia LED TV

www.insigniaproducts.com

INlink (CEC-compatible) device

TV keeps turning off.

• Make sure that the sleep timer is not turned on. See the Sleep Timer

option in Adjusting time settings on page 29.

A retail banner is displayed.

• You selected Store Display Mode when you ran the Easy Setup wizard.

Run the Easy Setup wizard and select Home User Mode on the Viewing

Environment screen. See the Customize my TV option in Using the

HELP menu on page 31.

PROBLEM SOLUTION

My TV is not displaying the video from the

connected CEC device.

• Make sure that the HDMI cable is connected securely to your TV and the

device.

• Make sure that the device is connected to your TV with an HDMI cable.

• Make sure that the device is a CEC device. See the documentation that

came with the device for more information.

• Press INPUT and make sure that the correct video input source is

selected. See Selecting the video input source on page 19.

• Make sure that the INlink feature is turned on. See the INlink Control

option in Using INlink on page 21.

• Try adjusting the TV picture. See Adjusting the TV picture on page 23.

My TV is not playing the audio from the

connected CEC device.

• Make sure that the HDMI cable is connected securely to your TV and the

device.

• Make sure that the device is connected to your TV with an HDMI cable.

• Make sure that the device is a CEC device. See the documentation that

came with the device.

• Make sure that the TV volume is turned up and not muted.

• Try adjusting the TV sound. See Adjusting sound settings on page 25.

• Make sure that the TV speakers are turned on and not muted. See

Adjusting sound settings on page 25.

• Make sure that the INlink feature is turned on. See INlink Control

option in Using INlink on page 21.

• If you have connected an HDMI CEC audio receiver, adjust the volume

on the receiver. When your TV detects an audio receiver, the TV

speakers turn off and sound plays through receiver speakers only.

• If you are using a home theater system, soundbar, or external speaker

system, make sure that it is turned on and is not muted.

• If you are using a home theater system, soundbar, or external speaker

system, make sure that you have selected the correct output mode.

• If you are using a home theater system, soundbar, or external speaker

system and have connected it with a digital audio cable, select Digital

Audio Format/Audio Delay on the Audio menu, then set Audio

Format to PCM. See the Digital Audio Format/Audio Delay option in

Adjusting sound settings on page 25.

PROBLEM SOLUTION

Insignia LED TV

www.insigniaproducts.com

My TV’s remote control does not control

the device.

• Make sure that there are no obstructions between the remote control

and the remote control sensors on your TV and the device.

• Depending on the device, all the buttons may not work.

• After you switch to an INlink device, use the remote control that came

with the device to control playback.

• Make sure that the INlink feature is turned on. See INlink Control

option in Using INlink on page 21.

• If you are trying to control the volume on an HDMI CEC audio receiver

using your TV remote control, make sure that the TV Speakers option

on the Audio menu is set to On. See Adjusting sound settings on

page 25.

• If you are trying to control the volume on an HDMI CEC audio receiver

using your TV remote control, make sure that the Audio Receiver

option on the INlink menu is set to On. See the Audio Receiver option

in Using INlink on page 21.

• The device may not support this feature. See the documentation that

came with the device for more information.

The device does not show up in the INlink

Device list.

• Make sure that the device is turned on.

• Make sure that the HDMI cable is connected securely to your TV and the

device.

• Make sure that the device is connected to your TV with an HDMI cable.

• Make sure that the INlink feature is turned on. See the INlink Control

option in Using INlink on page 21.

• Make sure that the device is a CEC device. See the documentation that

came with the device.

My device does not turn off when I turn off

my TV.

• Make sure that the INlink feature is turned on. See the INlink Control

option in Using INlink on page 21.

• Make sure that Device Auto Power Off is set to On on the INlink menu.

See the Device Auto Power Off option in Using INlink on page 21.

• The device may not support this feature. See the documentation that

came with the device for more information.

My TV does not turn on when I turn on my

device.

• Make sure that the INlink feature is turned on. See the INlink Control

option in Using INlink on page 21.

• Make sure that TV Auto Power On is set to On on the INlink menu. See

the TV Auto Power On option in Using INlink on page 21.

• The device may not support this feature. See the documentation that

came with the device for more information.

The Audio Receiver setting on the INlink

menu keeps turning back on after it is

turned off.

• When Audio Receiver is set to Off and INlink Control is set to On and

you make an adjustment to the audio receiver (for example, turn the

volume knob or press a button), Audio Receiver is automatically set to

On. To prevent this from happening, turn off the INlink feature. See the

INlink Control option in Using INlink on page 21.

Two volume bars appear when adjusting

the volume.

• When you adjust the volume on the audio receiver or with the TV

remote control, a double volume bar appears, one for the TV volume

and one for the audio receiver volume.

I cannot select the Root Menu option on

the INlink menu.

The device’s root menu does not open

when I select Root Menu on the INlink

menu.

• The device may not support this feature. See the documentation that

came with the device for more information.

PROBLEM SOLUTION

Note: If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again.

Insignia LED TV

www.insigniaproducts.com

Legal notices

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Warning

Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate

the equipment.

Cables

Connections to this device must be made with shielded cables with

metallic RF/EMI connector hoods to maintain compliance with FCC

Rules and Regulations.

Canadian Notice

Analog and Digital Television Receiving Apparatus

– Appareil de réception de télévision analogique et numérique,

Canada BETS-7 / NTMR-7

IC Statement

This device complies with Industry Canada licence—exempt RSS

standard(s).

Operation is subject to the following two conditions: (1) this device

may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired

operation of the device.

This equipment complies with IC radiation exposure limits set forth for

an uncontrolled environment.

Dolby License Notice and Trademark Acknowledgement

Manufactured under license from Dolby

Laboratories. Dolby, Dolby Audio, and the

double-D symbol are trademarks of Dolby

Laboratories.

HDMI

HDMI, the HDMI logo, and High-Definition

Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing

LLC.

Open Source

Font name: Arimo

Version 1.23

Licensed under the Apache License, Version 2.0 (the “License”); you

may not use this file except in compliance with the License. You may

obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software

distributed under the License is distributed on an “AS IS” BASIS,

WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express

or implied. See the License for the specific language governing

permissions and limitations under the License.

If you require additional information please call the Insignia support

line at 1-877-467-4289.

INSIGNIA is a trademark of Best Buy and its affiliated companies.

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richfield, MN 55423 U.S.A.

Insignia LED TV

www.insigniaproducts.com

ONE-YEAR LIMITED WARRANTY

Definitions:

The Distributor* of Insignia branded products warrants to you, the

original purchaser of this new Insignia-branded product (“Product”),

that the Product shall be free of defects in the original manufacturer of

the material or workmanship for a period of one (1) year from the date

of your purchase of the Product (“Warranty Period”).

For this warranty to apply, your Product must be purchased in the

United States or Canada from a Best Buy branded retail store or online

at www.bestbuy.com or www.bestbuy.ca and is packaged with this

warranty statement.

How long does the coverage last?

The Warranty Period lasts for 1 year (365 days) from the date you

purchased the Product. Your purchase date is printed on the receipt

you received with the Product.

What does this warranty cover?

During the Warranty Period, if the original manufacture of the material

or workmanship of the Product is determined to be defective by an

authorized Insignia repair center or store personnel, Insignia will (at its

sole option): (1) repair the Product with new or rebuilt parts; or (2)

replace the Product at no charge with new or rebuilt comparable

products or parts. Products and parts replaced under this warranty

become the property of Insignia and are not returned to you. If service

of Products or parts are required after the Warranty Period expires, you

must pay all labor and parts charges. This warranty lasts as long as you

own your Insignia Product during the Warranty Period. Warranty

coverage terminates if you sell or otherwise transfer the Product.

How to obtain warranty service?

If you purchased the Product at a Best Buy retail store location or from

a Best Buy online website (www.bestbuy.com or www.bestbuy.ca),

please take your original receipt and the Product to any Best Buy store.

Make sure that you place the Product in its original packaging or

packaging that provides the same amount of protection as the

original packaging.

To obtain warranty service, in the United States and Canada call

1-877-467-4289. Call agents may diagnose and correct the issue over

the phone.

Where is the warranty valid?

This warranty is valid only in the United States and Canada at Best Buy

branded retail stores or websites to the original purchaser of the

product in the country where the original purchase was made.

What does the warranty not cover?

This warranty does not cover:

• Customer instruction/education

• Installation

• Set up adjustments

• Cosmetic damage

• Damage due to weather, lightning, and other acts of God, such

as power surges

• Accidental damage

• Misuse

• Abuse

• Negligence

• Commercial purposes/use, including but not limited to use in a

place of business or in communal areas of a multiple dwelling

condominium or apartment complex, or otherwise used in a

place of other than a private home.

• Modification of any part of the Product, including the antenna

• Display panel damaged by static (non-moving) images applied

for lengthy periods (burn-in).

• Damage due to incorrect operation or maintenance

• Connection to an incorrect voltage or power supply

• Attempted repair by any person not authorized by Insignia to

service the Product

• Products sold “as is” or “with all faults”

• Consumable s, including but not limited to batteries (i.e. AA,

AAA, C etc.)

• Products where the factory applied serial number has been

altered or removed

• Loss or Theft of this product or any part of the product

• Display panels containing up to three (3) pixel failures (dots that

are dark or incorrectly illuminated) grouped in an area smaller

than one tenth (1/10) of the display size or up to five (5) pixel

failures throughout the display. (Pixel based displays may

contain a limited number of pixels that may not function

normally.)

• Failures or Damage caused by any contact including but not

limited to liquids, gels or pastes.

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR

EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT

BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS

PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE

OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA

PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT

TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE

PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED

WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO

THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES,

WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY

PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT

ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,

SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY

GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER

RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO

PROVINCE.

Contact Insignia:

1-877-467-4289

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies.

*Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richfield, MN 55423 U.S.A.

Insignia LED TV

www.insigniaproducts.com

PÓLIZA DE GARANTÍA

Esta póliza de garantía, expedida por Best Buy Imports, S. de R.L. de

C.V. (Best Buy), con domicilio en Av. Santa Fe No.440 Piso 2 OFNA 202 y

203 P3 y P4, Col. Santa Fe Cuajimalpa, C.P. 05348, Del. Cuajimalpa de

Morelos, México, Distrito Federal, teléfono 01-800-926-3100 para

productos de la marca INSIGNIA, DYNEX, ROCKETFISH, PLATINUM y

MODAL (el “Producto” o los “Productos”) establece las normas y

condiciones de garantía para el Producto que se describe en la

siguiente tabla de Productos adquiridos por el cliente (cómo se define

más adelante) en tiendas Best Buy localizadas dentro de la República

Mexicana.

El tiempo de garantía aplicable a cada producto será marcado con una

“x” por el vendedor en el listado que antecede al momento de su

venta. El tiempo de garantía correspondiente empieza a correr a partir

de la Fecha de compra y recepción * que se coloca al momento de su

venta.

Para efectos de esta Póliza, se entenderá como Cliente, aquellos que

adquieran con carácter de usuario final, cualesquiera de los Productos

vendidos en las tiendas Best Buy, localizadas dentro de los Estados

Unidos Mexicanos (“México”).

CONCEPTOS

Mediante esta garantía, Best Buy se compromete a respaldar el

Producto contra cualquier defecto de los materiales y/o mano de obra

empleados en la fabricación del Producto. Asimismo, la presente

garantía ampara todas las piezas y componentes de este producto.

Best Buy reparará el Producto en caso de estar defectuoso, y

remplazará la pieza o componente defectuosos, sin costo para el

Cliente, incluyendo la mano de obra y los gastos de transportación

derivados de su cumplimiento en nuestra red de servicio que más

adelante se detallará.

CONDICIONES

1. Notificación de las reclamaciones.

Solamente será necesario para ejercer la garantía, presentar el

Producto y la póliza de garantía debidamente sellada por el

establecimiento de Best Buy que lo vendió o se puede presentar la

factura, o recibo, o el comprobante en el que consten los datos

específicos del producto adquirido.

Garantía de Servicio: Si el Cliente identifica que el Producto tiene

partes, componentes o materiales defectuosos, o defectos por mano

de obra, deberá dar aviso con prontitud y una explicación de la

reclamación a la tienda Best Buy donde adquirió su Producto y/o al

centro de servicio especializado señalado en esta póliza. Todas las

reclamaciones para efectos de la presente garantía deberán hacerse

dentro de la vigencia de la misma. El personal especializado del centro

de servicio, realizará una inspección al Producto con el fin de

determinar la procedencia de la garantía. Ninguna reparación o

reposición de cualquier Producto o parte del mismo se hará sin cargo

fuera de la vigencia de la garantía del Producto. La garantía sobre la

reparación de una falla específica así como de las partes empleadas

para la misma, estará vigente por el período restante de la garantía del

Producto o por un período de 90 (noventa) días contados a partir de la

fecha de reparación del Producto o instalación de los repuestos, lo que

resulte mayor.

Durante el período de garantía, para reparar el Producto defectuoso,

el Cliente podrá llevarlo a la tienda Best Buy en que lo adquirió, o al

centro de servicio especializado señalado en esta póliza. El Cliente

deberá presentar el Producto defectuoso con la póliza de garantía

debidamente sellada por la tienda Best Buy. Una vez reparado, Best

Buy, o sus representantes, entregarán el Producto al Cliente, en la

misma tienda Best Buy en la que fue reclamada la garantía. Best Buy

no está obligado a proporcionar al Cliente un Producto substituto

durante el período de evaluación y en su caso de reparación en que el

Producto defectuoso se encuentre en el centro de servicio autorizado.

Garantía Limitada de por vida:

entiéndase

cómo garantía limitada de

por vida contra todo defecto de material o mano de

obra,

aplicable

durante la vida útil del

producto.

2. Recurso exclusivo.

Aceptación: El recurso exclusivo del Cliente y la única obligación de

Best Buy consiste en realizar todos los trabajos necesarios para reparar

cualquier Producto que se determine como defectuoso dentro del

período de esta garantía y proporcionar, sin cargo extra para el

Cliente, los repuestos de las partes defectuosas. [En el caso de que la

reparación del Producto o el reemplazo de partes no solucione el

defecto, o que hayan transcurrido 30 días posteriores a la recepción

del Producto para su reparación, o se hayan realizado 3 (tres)

reparaciones consecutivas sobre la misma falla e incurra en una cuarta

entonces y sólo en dichos casos, Best Buy substituirá el Producto

defectuoso por otro igual ó de similares características, o reembolsará

al Cliente el precio de adquisición de dicho Producto, en la fecha en

que fue adquirido

3. Excepciones de la Garantía Limitada:

Best Buy no tendrá responsabilidad ni obligación ante el Cliente y por

lo tanto se exime de hacer efectiva la garantía en los siguientes casos:

(i) cuando el Producto se hubiese utilizado en condiciones distintas a

las normales; (ii) cuando el Producto no hubiese sido operado de

acuerdo con el instructivo de uso que se le acompaña; y (iii) cuando el

Producto hubiese sido alterado o reparado por personas no

autorizadas por Best Buy. Best Buy excluye también todos aquellos

Productos que no hayan sido vendidos por Best Buy en cualquiera de

sus tiendas localizadas dentro de la República Mexicana. No están

cubiertas por la presente garantía las partes consumibles del

Producto. Esta garantía cubrirá defectos y/o fallos dentro del período

de garantía derivado de cualquier defecto de los materiales en la

fabricación del Producto.

4. Validez territorial: La presente póliza de garantía es válida

únicamente en la República Mexicana.

RENUNCIA DE LA GARANTIA:

Excepto por la garantía aquí estipulada, la cual cumple con lo

dispuesto por la NOM-024-SCFI-2013, Best Buy excluye expresamente

del alcance de la presente garantía cualquier otra garantía explícita o

implícita incluyendo, sin limitar, todas o cualquier declaración o

garantías de comerciabilidad y/o aplicación o uso del Producto para

propósitos específicos. Best Buy excluye expresamente, a toda y

cualesquiera garantía relativas a que su Producto sea compatible con

cualquier otro Producto o combinación de productos diferentes a los

Productos de la marca INSIGNIA, DYNEX, ROCKETFISH, PLATINUM y

MODAL a los que el Cliente decida conectar el Producto.

Insignia LED TV

www.insigniaproducts.com

V2 ENGLISH

20-0082

For product inquiries or accessibility assistance, please contact us with the information below:

1-877-467-4289

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies.

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richfield, MN 55423 U.S.A.

Mexico:

01-800-237-8289

Best Buy Imports S. DE R.L. DE C.V.

Avenida Santa Fe No. 440 Piso 2 Ofna 202 Y 203 P3 Y P4

Colonia Santa Fe Cuajimalpa, C.P. 05348, Delegación Cuajimalpa De Morelos, México, Ciudad De México

If the power cord is damaged, it must be replaced by the manufacturer or

its service agent or qualified personnel to avoid risk.

Insignia NS-24D310NA21 Guía del usuario

Marca: Insignia

Modelo: NS-24D310NA21

Categoría: Televisores LCD

Tipo: Guía del usuario

Descargar PDF

informe

en otros idiomas

English: Insignia NS-24D310NA21 User guide

Insignia NS-24D310NA21 Guía del usuario

Insignia NS-24D310NA21 Guía del usuario

en otros idiomas

Artículos relacionados

Otros documentos