Samsung WA45H7000AW/A2 El manual del propietario

Marca: Samsung

Modelo: WA45H7000AW/A2

Categoría: Lavadoras

Tipo: El manual del propietario

Este manual también es adecuado para

Washing Machine

user manual

WA48H7400A*

WA45H7200A*

WA45H7000A*

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service or accessory

parts, please register your product at or contact

www.samsung.com/register

1-800-SAMSUNG (726-7864)

This manual is made with 100% recycled paper.

English - 2

contents

INSTALLING YOUR WASHER

10 Unpacking your washer

10 Overview of your washer

11 Basic location requirements

11 Electrical

11 Grounding

11 Water

12 Drain facility

12 Flooring

12 Location considerations

12 Alcove or closet installation

13 Required dimensions for Installation

13 Important note to installer

OPERATING INSTRUCTIONS

17 Loading your washer

17 Getting started

WASHING A LOAD OF LAUNDRY

18 Overview of the control panel

20 Child Lock [

]

21 Sound

21 Garment

21 Delay End

21 Pre Soak

21 AquaJet

22 Mist Shower

22 Smart Care

23 Washing clothes using the cycle selector

23 ATC (Auto Temperature Control)

24 Detergent use

24 Features

MAINTAINING YOUR WASHER

27 Cleaning the exterior

27 Cleaning the interior

27 Storing your washer

27 Preserving the top cover and the front frame

28 Cleaning the dispensers

29 Self Clean

TROUBLESHOOTING

30 Check these solutions if your washer…

32 Information codes

APPENDIX

34 Fabric care chart

35 Cycle chart

38 Helping the environment

38 Declaration of conformity

38 Speciﬁcation

English - 3

safety information

Congratulations on your new Samsung Washer. This manual contains important

information on the installation, use, and care of your appliance. Please take time

to read this manual to take full advantage of your washer’s many beneﬁts and

features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and

situations that may occur. It is your responsibility to use common sense, caution, and care when installing,

maintaining, and operating your washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

WARNING

Hazards or unsafe practices that may result in severe personal injury

or death.

To reduce the risk of ﬁre, explosion, electric shock, or personal injury

when using your washer, follow these basic safety precautions:

CAUTION

Hazards or unsafe practices that may result in minor personal injury or

property damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Note

These warning icons are here to prevent injury to you and others.

Please heed them explicitly.

After reading this section, keep it in a safe place for future reference.

Read all instructions before using the appliance.

SAVE THESE INSTRUCTIONS

English - 4

WARNING: To reduce the risk of ﬁre, electric shock, or injury to persons when using your

appliance, follow basic precautions, including the following:

1. Read all instructions before using the appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked

in, or spotted with gasoline, dry-cleaning solvents, other ﬂammable or explosive

substances as they give o vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is

necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the lid of the

washing or drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to the weather.

7. Do not tamper with the controls.

8. Do not repair or replace any part of the appliance or attempt any servicing unless it is

speciﬁcally recommended in the user-maintenance instructions or in published user-

repair instructions that you understand and have the skills to carry out.

9. Do not add gasoline, dry-cleaning solvents, or other ﬂammable or explosive substances

to the wash water. These substances give o vapors that could ignite or explode.

10. Under certain conditions, hydrogen gas may be produced in a hot water system that

has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the

hot water system has not been used for 2 weeks or more, before using a washer or

combination washer-dryer, turn on all hot water faucets and let the water ﬂow from

each for several minutes. This will release any accumulated hydrogen gas. As the gas is

ﬂammable, do not smoke or use an open ﬂame during this time.

State of California Proposition 65 Warnings:

WARNING: This product contains chemicals known to the State of California to cause

cancer and reproductive toxicity.

SAVE THESE INSTRUCTIONS

safety information

WARNING

English - 5

CRITICAL INSTALLATION WARNINGS

Plug the power cord into an AC 120 V / 60 Hz/wall socket rated at 15 amps or higher. Use

the socket for this appliance only. In addition, do not use an extension cord.

- Sharing a wall socket with other appliances, using a power strip, or extending the power

cord may result in electric shock or ﬁre.

- Do not use an electric transformer. It may result in electric shock or ﬁre.

- Ensure that the power voltage, frequency, and current match the product’s

speciﬁcations. Failing to do so may result in electric shock or ﬁre.

Have this appliance installed by a qualiﬁed technician or service company.

- Failing to do so may result in electric shock, ﬁre, an explosion, problems with the

product, or injury.

Remove all foreign substances such as dust or water from the power plug terminals and

contact points using a dry cloth on a regular basis.

- Unplug the power plug and clean it with a dry cloth.

- Failing to do so may result in electric shock or ﬁre.

Plug the power plug into the wall socket in the right direction so that the cord runs towards

the ﬂoor.

- If you plug the power plug into the socket in the opposite direction, the electric wires

within the cable may be damaged and this may result in electric shock or ﬁre.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

- Improper grounding may result in electric shock, ﬁre, an explosion, or problems with the

product

- Never plug the power cord into a socket that is not grounded correctly. Make sure the

socket you use is grounded in accordance with local and national codes.

Do not install this appliance near a heater or inﬂammable material.

Do not install this appliance in a humid, oily, or dusty location, or in a location exposed to

direct sunlight or water (rain drops).

Do not install this appliance in a location where gas may leak.

- This may result in electric shock or ﬁre.

Plug the power plug into the wall socket ﬁrmly. Do not use a damaged power plug,

damaged power cord, or loose wall socket.

- This may result in electric shock or ﬁre.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord,

insert the power cord between objects, or push the power cord into the space behind the

appliance.

- This may result in electric shock or ﬁre.

Do not pull the power cord when unplugging the power plug.

- Unplug the power plug by holding the plug.

- Failing to do so may result in electric shock or ﬁre.

If the power plug or power cord are damaged, contact your nearest service center.

SAVE THESE INSTRUCTIONS

WARNING

English - 6

INSTALLATION CAUTIONS

Position the appliance so that the power plug is easily accessible.

- Failing to do so may result in electric shock or ﬁre due to electric leakage.

Install your appliance on a level and hard ﬂoor that can support its weight.

- Failing to do so may result in abnormal vibrations, noise, or problems with the product.

Unplug the power plug when the appliance is not being used for long periods of time or

during a thunder/lightning storm.

- Failing to do so may result in electric shock or ﬁre.

CRITICAL USAGE WARNINGS

If the appliance is ﬂooded, cut the power immediately and contact your nearest service

center.

If the appliance emits a strange noise, a burning smell, or smoke, unplug the power plug

immediately and contact your nearest service center.

- Failing to do so may result in electric shock or ﬁre.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate the area

immediately. Do not turn any appliance or light on or o.

- Do not use a ventilating fan.

- A spark may result in an explosion or ﬁre.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or

other ﬂammable or explosive substances.

- This may result in electric shock, ﬁre, or an explosion.

Do not force the washer lid open while the washer is operating (high-temperature washing/

drying/spinning).

- Water ﬂowing out of the washer may cause burns or cause the ﬂoor to be slippery.

This may result in injury.

- Forcing the lid open can damage the product or cause injury.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the

washer before using it.

Do not insert your hand under the washer.

- This may result in injury.

safety information

SAVE THESE INSTRUCTIONS

WARNING

CAUTION

English - 7

Do not touch the power plug with wet hands.

- This may result in electric shock.

Do not turn the appliance o by unplugging the power plug while the washer is in operation.

- Plugging the power plug into the wall socket again may cause a spark and result in

electric shock or ﬁre.

Keep all packaging materials well out of the reach of children, as packaging materials can

be dangerous to children.

- If a child places a bag over its head, it may suocate.

Do not let children or inﬁrm persons use this washer unsupervised.

- Failing to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating.

- This may result in injury.

Do not attempt to repair, disassemble, or modify the appliance yourself.

- Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse.

- If you need to repair or reinstall the appliance, contact your nearest service center.

- Failing to do so may result in electric shock, ﬁre, problems with the product, or injury.

If any foreign substance such as water enters the appliance in any area other than the tub,

unplug the power plug and contact your nearest service center.

- Failing to do so may result in electric shock or ﬁre.

If the water supply hose comes loose from the faucet and ﬂoods the appliance, unplug the

power plug.

- Failing to do so may result in electric shock or ﬁre.

USAGE CAUTIONS

If the washer is contaminated by a foreign substance such as detergent, dirt, food waste,

etc., unplug the power plug and clean the washer using a damp, soft cloth.

- Failing to do so may result in discoloration, deformation, damage or rust.

The clear portion of the lid can be broken by a strong impact. Take care when using the

washer.

- If the clear portion is cracked or broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the faucet

slowly.

Open the faucet slowly after a long period of non-use.

- The air pressure in the water supply hose or the water pipe may result in damage to a

part or in water leakage.

If a drain error occurs during an operation, check if there is a draining problem.

- If the washer is used when it is ﬂooded because of a draining problem, it may result in

electric shock or ﬁre due to electric leakage.

Do not insert your hand under the washer.

- This may result in injury.

SAVE THESE INSTRUCTIONS

CAUTION

English - 8

Insert the laundry into the washer completely so that laundry does not get caught in the lid.

- If laundry gets caught in the lid, it may result in damage to the laundry or the washer, or

result in water leakage.

Ensure that the faucet is turned o when the washer is not being used.

- Ensure that the water supply hose connectors are properly tightened.

- Failing to do so may result in property damage or injury.

Open the faucet and check if the water supply hose connector is ﬁrmly tightened and that

there is no water leaking before using the product.

- If the water supply hose connectors are loose, it may result in water leakage.

Do not stand on top of the appliance or place objects (such as laundry, lighted candles,

lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

- This may result in electric shock, ﬁre, problems with the product, or injury.

Do not operate the appliance with wet hands.

- This may result in electric shock.

Do not spray volatile material such as insecticide onto the surface of the appliance.

- As well as being harmful to humans, it may also result in electric shock, ﬁre,or problems

with the product.

Do not place an object that generates a electromagnetic ﬁeld near the washer.

- This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch

the water.

- This may result in burns or injury.

Do not wash, spin, or dry water-proof seats, mats, or clothing*.

- Do not wash thick, hard mats even if the washer mark is on the care label.

This may result in injury or damage to the washer, walls, ﬂoor, or clothing due to

abnormal vibrations.

* Items not to wash: Woolen bedding, rain covers, ﬁshing vests, ski pants, sleeping bags,

diaper covers, sweat suits, and bicycle, motor cycle, car covers, etc.

Do not operate the washer when detergent dispenser is removed.

- This may result in electric shock or injury due to water leakage.

Do not insert your hand into the detergent dispenser after opening it.

- This may result in injury as your hand may be caught.

safety information

SAVE THESE INSTRUCTIONS

English - 9

Do not place any non-laundry objects, such as shoes, food waste, or animals into the

washer.

- This can cause abnormal vibrations that can damage the washer, and, in the case of

pets, cause severe injury or death.

Do not press the buttons using sharp objects such as pins, knifes, ﬁngernails, etc.

- This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams, or lotions usually found in skincare

shops or massage clinics.

- This may result in the rubber seal becoming deformed and water leakage.

Do not leave metal objects (safety pins, hair pins, etc.) or bleach in the tub for long periods

of time.

- This may cause the tub to rust.

- If rust appears on the surface of the tub, apply a neutral cleansing agent to the surface

and use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry

contaminated by dry cleaning detergent.

- This may result in spontaneous combustion or ignition due to heat from the oxidation of

the oil.

Do not use hot water from water cooling/heating devices.

- This may result in problems with the washer.

Do not use natural hand-washing soap in the washer.

- If it hardens and accumulates inside the washer, it may cause problems with the

product, discoloration, rust, or bad odors.

Do not wash large laundry items such as bedding in the washing net.

- Failing to do so may result in injury due to abnormal vibrations.

- Place smaller items, such as lace socks and lingerie in the washing net.

Do not use hardened detergent.

- If it accumulates inside the washer, it may result in water leakage.

Do not wash throw rugs or doormats.

- If you wash throw rugs or doormats, the sand will accumulate inside the washer. It may

result in error such as no draining.

CRITICAL CLEANING INSTRUCTIONS

Do not clean the appliance by spraying water directly onto it.

Do not use the strong acid cleaning agent.

Do not use benzene, thinner, or alcohol to clean the appliance.

- This may result in discoloration, deformation, damage, electric shock, or ﬁre.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

- Failing to do so may result in electric shock or ﬁre.

SAVE THESE INSTRUCTIONS

WARNING

English - 10

installing your washer

UNPACKING YOUR WASHER

Unpack your washer and inspect it for shipping damage. Make sure you have received all the items

shown below. If your washer was damaged during shipping, or you do not have all of the items, contact

1-800-SAMSUNG (1-800-726-7864).

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.

Packing materials can be dangerous to children; Keep all packing material (plastic bags, polystyrene,

etc.) well out of childrens’ reach.

It’s need two people collaboration When demolition washing machine cushion bottom,the machine

forward dumping shall be strictly prohibited.

OVERVIEW OF YOUR WASHER

Parts supplied

Hose guide User manual book Plastic zip hose tie Water intake cap

Tools needed

Wrench Flat screwdriver Level

Parts not supplied

• Ifyouloseanaccessoryandwanttopurchaseareplacement,contactthe

Samsung service center (1-800-SAMSUNG (1-800-726-7864)).

• Thedesignofthepartsandaccessoriesmaydierfromthepicturesabove.

Their design is subject to change without notice for product improvement.

• Donotreuseoldhoses.Onlyusenewwatersupplyhoseswhenyouinstallthe

washing machine. Old water supply hoses can leak or burst causing ﬂooding

and property damage.

• Conrmthattherearerubberwashersinsideeachcouplingofthewater

supply hoses.

Water supply hoses

Adjustable legs

Drain Hose

Control panel

Lid

Power Cord

WARNING

CAUTION

English - 11

BASIC LOCATION REQUIREMENTS

Electrical

• 120 Volt 60 Hz 15 AMP fuse or circuit breaker

• Individual branch circuit serving only your Washer is recommended.

• Your Washer is equipped with a power cord.

NEVER USE AN EXTENSION CORD.

Grounding

ELECTRICAL GROUNDING IS REQUIRED FOR THIS APPLIANCE.

This appliance must be grounded. In the event of malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a power cord having a three-prong grounding plug for use in a

properly installed and grounded outlet.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

An improperly connected equipment-grounding conductor can increase the risk of electrical

shock. Check with a qualiﬁed electrician or serviceman if you are not sure whether the

appliance is properly grounded. Do not modify the plug provided with the appliance – if it

does not ﬁt the outlet, have a proper outlet installed by a qualiﬁed electrician.

IMPORTANT SAFETY PRECAUTIONS

• To prevent unnecessary risk of ﬁre, electrical shock or personal injury, all wiring and

grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.

70 Latest Revision and local codes and ordinances. It is the personal responsibility of the

appliance owner to provide adequate electrical service for this appliance.

NEVER CONNECT THE GROUND WIRE TO PLASTIC PLUMBING LINES, GAS LINES, OR

HOT WATER PIPES.

Water

To correctly ﬁll your Washer in the proper amount of time, water pressure of 20 to 116psi (137 to

800kPa) is required.

Water pressure less than 20 psi may cause water valve failure, or may not allow the water valve

to shut o completely, or may extend the ﬁll time beyond what your Washer controls allow,

causing your Washer to turn o. A time limit is built into the controls to prevent ﬂooding in your

home if a hose becomes loose.

The water faucets must be within 4 feet / 122 cm of the back of your Washer to match the inlet

hoses provided with your Washer.

Accessory inlet hoses are available in various lengths up to 10 feet / 275 cm for faucets that

are further away from the back of your Washer.

To avoid the possibility of water damage:

• Have water faucets easily accessible

• Turn o faucets when the washer is not in use.

• Periodically check that there is no leakage from the water inlet hose ﬁttings.

CHECK ALL CONNECTIONS AT THE WATER VALVE AND FAUCET FOR LEAKS.

01 installing your washer

CAUTION

WARNING

CAUTION

WARNING

English - 12

Drain facility

The recommended height of the standpipe is 39 in / 99 cm. The drain hose must be routed

through the drain hose clip to the standpipe. The standpipe must be large enough to accept the

outside diameter of the drain hose. The drain hose is attached to the washer at the factory.

Flooring

For best performance, you must install your washer on a solidly constructed ﬂoor. Wood ﬂoors

may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting

and soft tile surfaces are contributing factors to vibration which can cause your washer to move

slightly during the spin cycle.

Never install your washer on a platform or weakly supported structure.

Location considerations

Do not install your washer in areas where water may freeze, since your washer will always retain

some water in its water valve, pump, and hose areas. Frozen water can damage the belts, the

pump, hoses, and other components.

Alcove or closet installation

MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:

Sides – 1 in / 25 mm

Rear – 6 in / 152 mm

Closet Front – 2 in / 51 mm

TOP - 21 in / 533 mm

Gap between end of water valve and the wall

- Case 1. Assemble supply hose after installing : Over 3.9 in (10 cm).

- Case 2. Assemble supply hose before installing : Over 2.8 in (7cm).

If the washer and dryer are installed together, the closet front must have at least a 72 in² (465 cm²)

unobstructed air opening. Your washer alone does not require a speciﬁc air opening.

A. Recessed area

B. Side view - closet or conﬁned area

installing your washer

2 in.

(5.1 cm)

6 in.

(15.2 cm)

29.3 in.

(74.4 cm)

21 in.

(53.3 cm)

Case 1. 3.9 in. (10 cm)

Case 2. 2.8 in. (7 cm)

1 in.

(2.5 cm)

1 in.

(2.5 cm)

27.0 in.

(68.6 cm)

27.0 in.

(68.6 cm)

1 in.

(2.5 cm)

English - 13

Required dimensions for Installation

IMPORTANT NOTE TO INSTALLER

Please read the following instructions carefully before installing your washer.

These instructions should be retained for future reference.

We recommend you hire a professional to install this washer.

Installation Flow chart

STEP 1 Selecting a Location

Before you install the washer, make sure the location:

• Hasahard,levelsurfacewithoutcarpetingorooringthatmayobstructventilation.

• Isawayfromdirectsunlight.

• Hasadequateventilation.

• Isnotexposedtofreezingtemperatures(temperaturesunder32°For0°C).

• Isawayfromheatsourcessuchasoilorgas.

• Hasenoughspacesothatthewasherdoesn’trestonitspowercord.

27.0 in.

(68.6 cm)

43.9 in.

(111.5 cm)

39.3 in.

(99.8 cm)

29.3 in.

(74.4 cm)

29.3 in.

(74.4 cm)

43.9 in.

(111.5 cm)

58.1 in.

(147.6 cm)

Closet or Door

48 in.² *

(310 cm²)

24 in.² *

(155 cm²)

3 in.

(7.6 cm)

3 in.

(7.6 cm)

*Required spacing

Selecting

a location

Removing the

shipping bolts

(*Drum only)

Adjusting the

levelling feet

Connecting the water

and the drain

[Running a test cycle]

Run a test cycle(Rinse+Spin)

with small amount of laundary

(about 4~5 Towels)

Running

a Calibration

mode

Powering your

washing machine

Finish the

installation

Does a

Laundary machine

Vibrate?

Yes

Please check again before steps.

01 installing your washer

English - 14

STEP 2

Connecting the water and the drain

Connecting the water supply hose

Before installing the water supply hoses, make sure there are

rubber gaskets inside the ﬁttings at both ends of each new

water hose. Installing the water supply hoses without rubber

gaskets can cause water leakage.

When you initially install the washer, be sure to use new hoses.

Failing to do so may result in a water leakage or overﬂow and

may damage your property.

Do not connect multiple water supply hoses together to

increase the length of the supply hose. Hoses connected this

way can leak and the leakage can cause electrical shock. If a

hose is too short, replace the hose with a longer, high pressure

hose.

1. Connect the ends of the water supply hoses to the HOT and COLD faucets.

2. Tighten the ﬁttings by hand until they are snug, and then tighten them an

additional two-thirds of a turn with a wrench.

When you fasten the ﬁttings, do not fasten them too tightly or apply

tape or sealant to the faucets or water supply intakes. This can

damage the ﬁttings.

After you have connected the water supply hoses to the faucets,

ensure that they are connected correctly by pulling the water supply

hoses downwards

3. Place the unconnected ends of the hoses into a bucket and open

the faucets connected to the two water supply hoses for 10 or 15

seconds to remove any foreign substances from the hoses. Close the

faucets before continuing.

4. Connect the ends of the water supply hoses to the water supply

intake connections at the back of the washer.

The water supply hose connected to the HOT faucet must be

connected to the hot water supply intake and the water hose

connected to the COLD faucet must be connected to the COLD

water supply intake.

5. Tighten the ﬁttings by hand until they are snug, and then tighten them

an additional two-thirds of a turn with a wrench.

To ensure the correct water usage, connect both the HOT and

COLD water faucets. If either or both are not connected, an

“4E” (no ﬁll) error can occur.

If you do not want to use the HOT water supply hose, insert

the water intake cap into the HOT water supply intake hole. In

this case, you must select the Tap Cold option for the water

temperature.If you select the Tap Cold option, all the lamps for

the water temperature options are turned o.

Conﬁrm that the water supply hoses are not twisted or bent. If

the hoses are twisted or bent, the hoses can leak and cause

electric shock due to the water leakage.

6. Turn on the HOT and COLD water supplies and check all the water

supply intake connections and the faucets for water leaks.

installing your washer

Rubber Washer

Coupling

Cold Hot

CAUTION

English - 15

Connecting the drain hose

The end of the drain hose can be positioned in

three ways:

Over the edge of a wash basin

Secure the guide to the side of the basin wall

with a hook or to the tap with a piece of string to

prevent the drain hose from moving.

In a standpipe or laundry tub

The standpipe must be no shorter than 39 in (99

cm) and no longer than 96 in (245cm).

Make sure that the connection between the

drain hose and the standpipe is not airtight.

Connection the hose guide within 4 in (10cm)

from the end of the drain hose. If the drain hose is

extended more than 4 in (10cm) beyond the end of the

hose guide, mold or microorganisms could spread to the

inside of the washer.

Drain Hose can be installed until 96 in (245cm) maximum.

But drain capability can be reduced at this height. It

causes the washer to have odor, because of remained

water in the drain system.

If drain hose is installed below 39 in (99cm), water can be

drained in cycle working cause of siphon phenomenon. It

causes the washer to “4E” error.

STEP 3

Leveling your washer

See if the washer is level by checking the position of the tub:

1. Slide the washer into position.

2. Open the lid of the washer, and pour the water into the tub to

just below the pulsator level.

3. If the washer is level, the pulsator is positioned at the center of the

water as shown in the ﬁgure. If not, level your washer by turning the

front leveling feet clockwise or counterclockwise as necessary.

Turn the front leveling feet clockwise to raise the washer, and

counterclockwise to lower the washer.

01 installing your washer

Laundry tub Stand pipe

Hose

retainer

Tie

strap

39” Min

(99 cm)

96” Max

39” Min

Loosen Lock

Pulsator

Adjustable legs

(three)

1RPRUHWKDQ

LQFP

+RVH*XLGH

English - 16

STEP 4

Powering your washer

Plug the power cord into a 3-prong, well grounded 120 volt 60

Hz approved electrical outlet protected by a 15-amp fuse or

comparable circuit breaker.

Your washer is grounded through the third prong of the power

cord when plugged into a three-prong grounded electrical

outlet.

Test run

Make sure that you install your washing machine correctly by running the Rinse+Spin cycle

after the installation is complete.

STEP 5

Running a test cycle

Run a test cycle as follows to check if your washer is properly installed.

1. Load about 6 pounds of laundry into the tub.

2. Press the Power button to turn on your washer.

3. Select the Rinse+Spin cycle by turning the Cycle Selector.

4. Press the Start/Pause button to start the test cycle.

5. The washer should not rock or vibrate excessively when water is supplied or when washing

or spinning, and should drain well during the spin cycle.

If water leaks while water is being supplied or drained, check the water connections. Refer

to the “Connecting the water and the drain” section on pages 14~15 for instructions.

If the washer rocks and vibrates excessively, level your washer again. Refer to the “Leveling

your washer” section on page 15 for instructions.

STEP 6

Calibration mode

Your Samsung washing machine detects the laundry weight automatically.

For more accurate weight detection, please run Calibration Mode after the installation.

To run Calibration Mode, follow these steps:

1. Remove laundry or any contents in the machine.

2. Press the Temp. and Delay End buttons simultaneously, and then press the Power button.

The machine turns on.

3. Press the Start/Pause button to activate “Calibration Mode”.

4. The pulsator rotates clockwise and counterclockwise for approximately 1 minute.

5. When “Calibration Mode” is ﬁnished, “End” (WA48H7400A*, WA45H7200A*) / “0”

(WA45H7000A*)

appears on the display, and the machine automatically turns o. The washing machine is now

ready for use.

installing your washer

English - 17

operating instructions

WARNING: To reduce the risk of ﬁre, electric shock, or injury to persons when using your appliance,

follow basic precautions, including the following:

LOADING YOUR WASHER

• You can ﬁll the tub with dry, unfolded clothes, but DO NOT OVERLOAD the tub, No more than 3/4 full.

• Overloading may reduce washing eciency, cause excess wear, and possibly cause creasing or

wrinkling of the load.

• Wash delicate items such as bras, hosiery, and other lingerie in the Delicates cycle with similar

lightweight items.

• When washing big bulky items or a few smaller items that don’t ﬁll the tub completely – a rug, a pillow,

stued toys, or one or two sweaters, for example – add a few towels to improve spin performance.

• Do not insert bulky items except for Bedding in this cycle.

During the spin cycle, the washer may add additional water to redistribute the clothes and correct an

imbalance inside the drum.

• When washing heavily soiled loads, do not overload your washer to ensure good cleaning results.

• To add a forgotten item:

1. Press the Start/Pause button to pause the washer.

2. Wait for the door to unlock automatically, and then open the door.

3. Add the item, close the door, and then press the Start/Pause button. The cycle will resume.

GETTING STARTED

1. Load your washer.

2. Add liquid (or powder) detergent and additives to the dispenser (see pages 24~26).

3. Select the appropriate cycle and options for the load (see pages 18~23).

4. Close the lid.

5. Press the Start/Pause button.

6. The Wash Indicator light illuminates.

7. The estimated cycle time will appear in the display.

The time may ﬂuctuate to indicate the time remaining in the cycle better.

The actual time required for a cycle may dier from the estimated time in the display depending on the

water pressure, water temperature, detergent, and laundry.

8. Before your washer starts to ﬁll, it will make a series of clicking noises to check the door lock and do a

quick drain.

• When the cycle is complete, the Door Lock light will go out and “End” (WA48H7400A*,

WA45H7200A*) / “0” (WA45H7000A*) will appear in the display.

• Pressing the Power button cancels the cycle and stops your washer.

•

The Wash, Rinse ,and Spin indicator lights will illuminate during those portions of the cycle.

02 operating instructions

WARNING

English - 18

washing a load of laundry

OVERVIEW OF THE CONTROL PANEL

Cycle Selector

Select the appropriate cycle for the type of load.

The cycle you select determines the tumble pattern and spin speed

for the cycle.

To minimize wrinkling of laundry, select the Perm Press cycle.

NORMAL - For most fabrics including cottons, linens, and normally

soiled garments.

HEAVY DUTY - For sturdy, colorfast fabrics and heavily soiled

garments.

COLORS/DARKS (WA48H7400A*, WA45H7200A*) - For brightly or

dark colored casual garments.

BEDDING - For bulky items such as blankets and sheets. When you

are washing comforters, use liquid detergent.

DELICATES - For sheer fabrics, bras, lingerie, silks, and other

handwash-only fabrics. For best results, use liquid detergent.

WATERPROOF - For waterproof, water-resistant items.

* Do not wash waterproof items and non-waterproof items together.

PERM PRESS - For wash-and-wear, synthetic fabrics, and lightly to

normally soiled garments.

WA48H7400A*

43 5

1 6

WA45H7200A*

WA45H7000A*

English - 19

ACTIVE WEAR (WA48H7400A*, WA45H7200A*) - Use this cycle to wash

exercise wear such as sports jerseys, training pants, shirts/tops and other

performance clothing. This cycle provides eective soil removal with gentle

action for special fabric care.

QUICK WASH - For lightly soiled garments needed quickly.

SPIN - Drains the water and spins at a high speed.

RINSE + SPIN - Use for loads that need rinsing only or to add rinse-added

fabric softener to a load.

Display

Provides instructions and diagnostics while keeping you updated on the cycle

status and time remaining.

Temp. selection

button

Press the button repeatedly to cycle through the dierent water temperature

options.

Hot - Whites and heavily soiled, colorfast items.

Warm - Colorfast items.

Eco Warm - Moderately soiled, colorfast items; most wrinkle-free items.

Cold - Brightly colored, very lightly soiled items.

Tap Cold - Cold water with no warm water added.

 If you select the Tap Cold option, all the lamps for the water

temperature options are turned o.

Spin selection

button

Press the button repeatedly to cycle through the dierent spin speed options.

High - Use for underwear, t-shirts, jeans, and sturdy cottons.

Medium - Use for jeans, wrinkle-free or wash-and-wear items, and

synthetics.

Low - Use for delicate items needing a slow spin speed.

No Spin - Drains your washer without spinning. Use for extremely delicate

items that cannot tolerate any spin.

Soil Level

selection button

Press the button to select the soil level/washing time.

Heavy - For heavily soiled loads.

Normal - For moderately soiled loads. This setting is best for most loads.

Light - For lightly soiled loads.

Select Cycle

Option

Press these buttons to select dierent cycle options.

AquaJet

Deep Clean (WA48H7400A*) - Improve washing performance

through longer AquaJet spray action. Water Level can be adjusted.

AquaJet

(WA45H7200A*) - Improves the washing & rinsing performance

using falling water.

Extra Rinse (WA45H7000A*) - Change from spray rinse mode to deep rinse

mode, and rinse once again.

Delay End - Delay the end of any cycle for up to 19 hours in one-hour

increments. Displayed hour indicates the time the wash will be ended.

Self Clean - Use to clean dirt and bacteria from the drum. Regular use(after

every 20 washes) is recommended. No detergent or bleach is needed.

Pre Soak - Remove stains more thoroughly by specifying additional time.

Start/Pause

selection button

Press to pause and restart cycles.

Power button

Press once to turn your washer on. Press again to turn your washer o. If

the washer is left on for more than 10 minutes without any buttons being

touched, the power automatically turns o.

03 washing a load of laundry

English - 20

Child Lock [ ]

Child Lock prevents children from playing with your washer.

Activating the Child Lock function

Press and hold the Spin and Soil Level buttons simultaneously for approximately 3 seconds.

• When you activate the Child Lock function, the “Child Lock [

]” lamp blinks.

Using the Child Lock function

If the lid is opened when the Child Lock function is on, “dE” is displayed and an alarm sounds.

• If the water level in the tub is above the safe water level, “dE” is displayed on the LED display

and the washing machine starts to drain water by force after 30 seconds.

• If the water level in the tub is above the safe water level and the Child Lock function is turned

on while the door is open, “CL” is displayed on the LED display even if the power of the

washing machine is turned o and the washing machine drains water by force.

• Even if the power of the washing machine is turned o, if the lid is opened while the water

level in the tub is above the Reset water level, “CL” is displayed on the LED display without

the alarm sounding and the washing machine starts to drain water. When the draining

operation ﬁnishes, the power is automatically turned o again.

• You have activated the Child Lock function while the washing machine is running, the Start/

Pause button will not work.

• After the compulsory drain, the “CL” code display blinks at 1 second intervals and the

product enters the “CL” mode. (When the product is in the “CL” mode, only the Power

button works.)

• To cancel the “CL” mode, you need to turn the power o and then on again.

• To cancel the “dE” mode, deactivate the Child Lock function. To deactivate the Child Lock

function, press and hold the Spin and Soil Level buttons simultaneously for at least

3seconds.

Adding laundry when Child Lock is on

• Toaddlaundry,deactivatetheChildLockfunction.TodeactivatetheChildLockfunction,

press and hold the Spin and Soil Level buttons simultaneously for at least 3seconds.

See “Pause Option” on page 23 for additional details.

Deactivating the Child Lock function

Press and hold both the Spin and Soil Level buttons simultaneously for approximately

3seconds.

• When you deactivate the Child Lock function, the “Child Lock [

]” is turned o.

• The Child Lock function prevents children or the inﬁrm from accidently operating the washer

and injuring themselves.

• Ifachildentersthewashingmachine,thechildmaybecometrappedandsuocate.

• OnceyouhaveactivatedtheChildLockfunction,itcontinuesworkingevenifthepower

is turned o.

• Forcingthelidopencanresultininjuryordamagetotheproduct.

To add laundry after you have activated the Child Lock function, you must ﬁrst deactivate

the Child Lock function.

CAUTION

WARNING

washing a load of laundry

English - 21

Sound

The Sound O function can be selected during all courses.

Garment

You can add or take out laundry items even after the wash has started, as long as the“Garment”

light is on. Pushing the Start/Pause button unlocks the lid. If you open the lid and want to

continue the wash cycle, close the lid, and then press the Start/Pause button.

If you have activated Child Lock, you must deactivate it ﬁrst. See page 20.

Delay End

You can set the washing machine to start your wash automatically at a later time, by choosing a delay

time.

The hour displayed indicates the time at which the wash will be ended.

1. Set your wash course.

2. Press the Delay End button repeatedly until the delay time is set.

3. Press the Start/Pause button. The “Delay End” indicator will be lit, and the clock will begin

counting down until it reaches the set time.

4. To cancel a Delay End function, press the Power button and then turn the washing machine on

again.

Pre Soak

Use this function when the laundry is heavily contaminated or stained. This function improves the

wash performance by adding a Pre Soak cycle.

- If you select this function, the total cycle time is increased by 15 minutes.

- When the Pre Soak cycle starts, the washing machine repeats a wash cycle after supplying

water and then performs a 15-minute soak cycle.

- When the Pre Soak cycle is complete, the conﬁgured wash cycle starts without draining

water.

AquaJet

Through the strong spray and detergent water recirculation produced by the Pump of

AquaJet™, wash can be more gentle and thorough than conventional top loaders.

- AquaJet™ Deep Clean: If AquaJet™ Deep Clean mode is selected, washing performance

can be further improved by addition spray action. Sucient water quantity can be ensured by

adjusting Water Level.

Courses AquaJetTM Function

NORMAL, HEAVY DUTY, PERM PRESS,

COLORS/DARKS, ACTIVE WEAR, RINSE+SPIN

Available

BEDDING, DELICATES,WATERPROOF,

QUICK WASH, SPIN

Not Available

03 washing a load of laundry

English - 22

Mist Shower

Mist Shower sprays water from a nozzle that is independent of the main water supply system.

This soaks the laundry with water from the beginning of the rinse cycle and ensures an eective

wash even with a small amount of water.

(The Mist Shower function may not work if there are

many laundries.)

Smart Care (WA48H7400A*, WA45H7200A*)

This function enables you to check the status of the washing machine using a smartphone.

1. To enable the Smart Care function, press and hold the Pre Soak key for 3 seconds after

turning the power on or when an error occurs.

• Theerrorcodehistoryisdeletedafteryouuse this function.

2. The Smart Care indicator is lit on the display.

3. Run the Smart Care app on your smart phone.

• GalaxyS,GalaxyS2,GalaxyS3,GalaxyS4,GalaxyS2(HD),GalaxyNote,GalaxyNote2,

Galaxy Note3 (Other devices may not be normal operation).

Supported operating system: Android 2.2 or higher.

• IPhone 3 G S, iPhone 4/4S, iPhone 5/5S.

Supported operating system : OS 4.3 or higher.

4. Focus your smart phone’s camera on the display panel of the washing machine.

5. If the smart phone’s camera is focused on the display panel of the washing machine,

the panel and error message is automatically recognized and the error type and

countermeasures are displayed on the smart phone.

6. If the smartphone fails to recognize the error code more than twice, please enter the error

code displayed on the display panel of the washer manually into the Smart Care app.

Downloading the Smart Care app

• DownloadtheSamsungLaundryAppintoyourmobilephonefromtheAndroidmarket

or Apple App store. (Search word : Samsung Smart Washer/Dryer)

Precautions when using Smart Care

• Iflightfromalightbulb,uorescentbulb,orlampisreectedonthedisplaypanelof

the washing machine, the smartphone may not be able to recognize the panel or error

message easily.

• Ifyouholdthesmartphoneattoolargeananglerelativetothefrontofthedisplaypanel,

it may not be able to recognize the error code. For best results, hold the smartphone so

that the front of the panel and the smartphone are parallel or nearly parallel.

blue round object located

left to detergent dispenser

washing a load of laundry

English - 23

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”

automatic control system. When you select a wash program, the machine will set the correct

temperature, washing time, and washing speed.

1. Press the Power button.

2. Open the lid.

3. Load the articles of clothing one at a time loosely into the drum, without overﬁlling it.

4. Add liquid (or powder) detergent, softener, and/or bleach (if necessary) to the appropriate

compartments. See pages 24~26.

5. Close the lid.

6. Use the Cycle Selector to select the appropriate cycle according to the type of material:

NORMAL, HEAVY DUTY, COLORS/DARKS, BEDDING, DELICATES,

WATERPROOF, PERM

PRESS, ACTIVE WEAR, QUICK WASH, SPIN, RINSE+SPIN. The relevant indicators will

illuminate on the control panel.

7. At this time, you can control the wash temperature, the number of rinse cycles, the spinning

speed, and the delay time by pressing the appropriate option button.

8. Press the Start/Pause button on the Cycle Selector and the wash will begin. The process

indicator will light up and the remaining time for the cycle will appear in the display.

Pause Option

To remove or add laundry items, follow these steps:

1. Press the Start/Pause button to unlock the lid.

The lid cannot be opened when the water is too HOT.

2. Remove or add laundry items.

3. Close the lid, and then press the Start/Pause button to restart the wash.

If you have Child Lock on, you must deactivate it ﬁrst. See page 20.

When the cycle is ﬁnished:

After the total cycle has ﬁnished, the power will turn o automatically.

1. Open the lid.

2. Remove laundry.

ATC (AUTO TEMPERATURE CONTROL)

ATC is the control function that the washer controls water temperature with temperature sensor (thermistor).

Because there are numerous water temperatures depending on the customer’s environments(cold

areas, warm areas, various water temperature, settings of heater temperature, etcs), ATC function in

our washer maintains the certain level of wash temperature to output the best washing performance at

each cycle.

If you select normal & heavy duty course, those courses are the regulation and UL course. Since new

washer must reduce the amount of energy usage at ﬁrst priority, customer will notice more cold water

entering the washer. But This is Normal, not a problem.

In those regulation course, Hot temperature is similar to acceptable adult bath-water temperature and

warm temperature is similar to comfortable swimming-pool water temperature.

If customer want to wash clothes in speciﬁc water temperature, customer should choose a dierent

course at each temperature(Hot/Warm/Eco Warm)

03 washing a load of laundry

English - 24

DETERGENT USE

Your washer is designed to use high eciency (HE) detergents.

• For best cleaning results, use high eciency detergents such as

Tide HE, Wisk HE, Cheer HE or Gain HE*. High eciency detergents

contain suds suppressors that reduce or eliminate suds. When fewer

suds are produced, the load tumbles more eciently and cleaning is

maximized.

Regular detergent is not recommended. Use HE detergents only.

Reducing the amount of detergent may reduce the quality of cleaning. It is important to pre–treat

stains, sort carefully by color and soil level, and avoid overloading.

* Brand names are trademarks of their respective manufacturers.

FEATURES

Automatic dispenser

Your washer has separate compartments for dispensing detergent and color-safe bleach and

fabric softener. Add all laundry additives to their respective compartments before starting your

Washer.

The automatic dispenser MUST ALWAYS be in place before you start your washer.

DO NOT open the automatic dispenser when your washer is running.

• Never exceed the manufacturer’s recommendations when adding detergent.

• This compartment holds liquid detergent for the main wash cycle, which is added to the

load at the beginning of the cycle.

• When using powdered detergent, remove the liquid detergent compartment from the

detergent drawer. The washer will not dispense powdered detergent from the liquid

detergent compartment.

To add detergent to the automatic dispenser:

1. Open the dispenser drawer.

2. Load the recommended amount of liquid (or powder) detergent into the detergent

compartment before you start your wash.

3. Close the drawer slowly and smoothly to avoid spilling, splashing, or premature dispensing of

the contents.

It is normal for a small amount of water to remain in the

dispenser compartments at the end of the cycle.

Do not put chlorine bleach in the dispenser drawer.

washing a load of laundry

WARNING

Liquid detergent

compartment

English - 25

Loading the Liquid (or Powder) detergent compartment

1. Pour the recommended amount of laundry detergent

directly into the detergent compartment before starting

your washer.

2. If you are using color-safe bleach, add it with the detergent

to the detergent compartment.

When adding color-safe bleach with detergent, it is best if

both laundry products are in the same form – liquid.

When using powdered detergent, remove the liquid

detergent compartment from the detergent drawer. The

washer will not dispense powdered detergent from the

liquid detergent compartment.

Loading the Bleach compartment

(Liquid chlorine bleach only)

1. Add chlorine bleach to the bleach compartment.

DO NOT exceed the MAX FILL line.

• Avoid splashing or over–ﬁlling the compartment.

• Your washer automatically dispenses bleach into the

tub at the appropriate time.

2. The dispenser automatically dilutes liquid chlorine bleach

before it reaches the wash load.

• Never pour undiluted liquid chlorine bleach directly

onto the load or into the tub. It is a powerful chemical

and can cause fabric damage, such as weakening of

the ﬁbers or color loss, if not used properly.

• If you prefer to use color–safe, non–chlorine bleach,

add it to the appropriate detergent compartment.

DO NOT pour color–safe bleach into the Bleach compartment.

03 washing a load of laundry

Liquid detergent

compartment

Bleach

compartment

English - 26

Loading the Fabric softener compartment

1. Pour the recommended amount of liquid fabric softener

into the softener compartment.

For smaller loads, use less than one capful.

2. Dilute the fabric softener with water until it reaches MAX

FILL in the compartment.

3. The dispenser automatically releases liquid fabric softener

at the proper time during the rinse cycle.

• Use the softener compartment ONLY for liquid fabric

softeners.

• DO NOT use the Downy Ball* in the fabric softener

compartment with this washer. It will not add fabric

softener at the appropriate time.

Use the detergent compartment.

• Do not use liquid fabric softener that is too sticky as it may not mix with the water

suciently.

* Brand names are trademarks of their respective manufacturers.

washing a load of laundry

Fabric softener

compartment

English - 27

maintaining your washer

CLEANING THE EXTERIOR

Turn o the water faucets after ﬁnishing the day’s washing.

This will shut o the water supply to your washer and prevent the unlikely possibility of damage from

escaping water. Leave the lid open to allow the inside of your washer to dry out.

Use a soft cloth to wipe up all detergent, bleach or other spills as they occur.

Clean the following as recommended:

Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads. Do not spray

cleaners directly on the panel.

CLEANING THE INTERIOR

Clean the interior of your washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial

residue that may remain in your washer as a result of washing clothes.

Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent

stains on your washer or laundry.

Hard water deposits may be removed, if needed. Use cleaners labeled “Washer safe”.

STORING YOUR WASHER

Washers can be damaged if water is not removed from hoses and internal components before storage.

Prepare your washer for storage as follows:

• Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your washer through the

cycle without a load.

• Turn the water faucets o and disconnect the inlet hoses.

• Unplug your washer from the electrical outlet and leave your washer lid open to let air circulate inside the

drum.

• If your washer has been stored in below–freezing temperatures, allow time for any leftover water in your

washer to thaw out before use.

PRESERVING THE TOP COVER AND THE FRONT FRAME

Do not place any heavy or sharp objects or a detergent box on the washing machine. They can scratch or

damage the top cover of the unit.

Since the entire washing machine has a high-gloss ﬁnish, the surface can be scratched or damaged.

Avoid scratching or damaging the surface when using the washing machine.

04 maintaining your washer

English - 28

CLEANING THE DISPENSERS

The automatic dispenser may need to be cleaned periodically due to laundry additive buildup.

1. Pull the dispenser drawer straight back until it stops.

2. Tilt the dispenser drawer upward and remove it.

3. Remove the inserts from the 3 compartments. Rinse the

inserts and the drawer with warm water to remove traces

of accumulated laundry products.

4. To clean the drawer opening, use a small, non-metal brush

to clean the recess. Remove all residue from the upper and

lower parts of the recess.

5. Return the inserts to the proper compartments and replace

the drawer. By placing the dispenser drawer rail  on

top of the compartment rail  (Tilt the dispenser drawer

downward and insert it.), and then pushing the drawer in

ﬁrmly and slowly.

maintaining your washer

English - 29

SELF CLEAN

Self Clean is a self-cleaning cycle that removes mold that

may occur inside the washing machine.

1. Press the Power button.

2. Select the Self Clean course.

• Once the Self Clean course is selected,

the only function that can be set is Delay

End.

3. Press the Start/Pause button.

• If you press the Start/Pause button, Self

Clean begins.

• Using Self Clean, you can clean the drum without using a cleansing agent.

• Never use Self Clean when laundry is in the washing machine. This may cause damage to

the laundry or a problem with the washing machine.

The Self Clean Auto Indicator Function

• If the “Self Clean” indicator is lit after a wash, it indicates

that tub (drum) cleaning is required. In this case, remove

the laundry from the washing machine, turn the power on,

and clean the drum by running Self Clean.

• If you do not run Self Clean, the “Self Clean” indicator

turns o. However, the “Self Clean” indicator will light

again after two washes. Not running Self Clean at this point

will not cause a problem with the washing machine.

• Although the Self Clean Auto Indicator appears once a

month or so, the frequency may dier depending on the

number of times the washing machine is used.

WA48H7400A*/ WA45H7200A*

WA45H7000A*

CAUTION

WA48H7400A*/WA45H7200A*

WA45H7000A*

04 maintaining your washer

English - 30

troubleshooting

CHECK THESE SOLUTIONS IF YOUR WASHER…

PROBLEM SOLUTION

Will not start. • Make sure the lid is closed.

• Make sure your washer is plugged in.

• Make sure the water source faucets are open.

• Make sure to press the Start/Pause button to start your Washer.

• Make sure Child Lock is not activated. See page 20.

• Before your washer starts to ﬁll, it will make a series of clicking noises

to check the lid lock and do a quick drain.

• Check the fuse or reset the circuit breaker

Has no water or not enough

water.

• Turn both faucets on fully.

• Straighten the water inlet hoses.

• Disconnect hoses and clean the screens. Hose ﬁlter screens may be

clogged.

Has detergent remaining

in the automatic dispenser

after the wash cycle is

complete.

• Make sure your washer is running with sucient water pressure.

Vibrates or is too noisy. • Make sure your washer is set on a level surface. If the surface is not

level, adjust your washer’s feet to level the appliance.

• Make sure your washer is not touching any other object.

• Make sure the laundry load is balanced.

Stops • Plug the power cord into a live electrical outlet.

• Check the fuse or reset the circuit breaker.

• Close the lid and press the Start/Pause button to start your washer.

For your safety, your washer will not spin unless the lid is closed.

• Before your washer starts to ﬁll, it will make a series of clicking noises

to check the lid lock and do a quick drain.

• There may be a pause or soak period in the cycle. Wait and it may

start.

• Check the screens on the inlet hoses at the faucets for obstructions.

Clean the screens periodically.

English - 31

PROBLEM SOLUTION

Fills with the wrong

temperature water.

• Turn both faucets on fully.

• Make sure the temperature selection is correct.

• Make sure the hoses are connected to the correct faucets.

Flush water lines.

• Disconnect the hoses and clean the screens. The hose ﬁlter screens

may be plugged.

• As your washer is ﬁlling, the water temperature may change as

the automatic temperature control feature checks incoming water

temperature. This is normal.

• While your washer is ﬁlling, you may notice just hot and/or just

cold water going through the dispenser when you have selected

cold or warm wash temperatures. This is a normal function of the

automatic temperature control feature as your washer determines the

temperature of the water.

Lid locked or will not open. • Press the Start/Pause button to stop your washer.

• It may take a few moments for the lid lock mechanism to disengage.

Does not drain and/or spin. • Check the fuse or reset the circuit breaker.

• Straighten the drain hoses. Eliminate kinked hoses. If there is a drain

restriction, call for service.

• Close the lid and press the Start/Pause button. For your safety, your

washer will not spin unless the lid is closed.

Load is too wet at the end

of the cycle.

• Use the High spin speed.

• Use high eciency detergent to reduce over–sudsing.

• The Load is too small. Very small loads (one or two items) may

become unbalanced and not spin out completely.

Leaks water. • Make sure all hose connections are tight.

• Make sure the end of the drain hose is correctly inserted and secured

to the drainage system.

• Avoid overloading.

• Use high eciency detergent to prevent over–sudsing.

Has excessive suds. • Use high eciency detergent to prevent over-sudsing.

• Reduce the detergent amount for soft water, small or lightly soiled

loads.

• Non-HE detergent is NOT recommended.

Has an odor. • Check your Detergent . Excessive suds collect in nooks and crannies

and cause mold.

• Run cleansing cycles to sanitize the machine periodically.(Silver Care

or Sanitize Cycle or Self Clean)

• Dry the interior of your washer after the total cycle has ﬁnished.

05 troubleshooting

English - 32

INFORMATION CODES

The Washer may display information codes to help you understand what is occurring with your Washer better.

CODE SYMBOL MEANING SOLUTION

The Water Level sensor is not

working properly.

When washer displays “1E”,

washer do draining for 3 minutes,

At this time, Power button is

invalid.

Call for service.

Your Washer has tried to ﬁll but

was unsuccessful.

Check if the hot water supply

hose is connected.

When washer displays “4E”,

washer do draining for 3 minutes.

At this time, Power button is

invalid.

Make sure the water faucets are open all the

way. Check for kinked hoses.

Check the inlet screens on the ﬁll hoses.

If you use a Flood Safety Device, then please

remove the device and connect the water hoses

directly to the unit.

You must connect the hot water supply hose

because hot water is supplied by the Auto

Temperature Control (A.T.C.) function.

Your washer is not draining. It can

also mean that the unit senses a

small clog while draining.

Do the following:

1) Turn o the unit and turn it on again.

2) Select only the Spin Cycle.

3) Press the Start/Pause to drain the water.

If it still does not drain, call for service.

Your Washer has tried to ﬁll but

has not reached the proper water

level.

When washer displays “LE”,

washer do draining for 3 minutes,

At this time, Power button is

invalid.

Call for service.

Unbalanced load prevented your

Washer from spinning.

Redistribute the load, press the Start/Pause

button.

Lid is open when washer is

running.

Close the lid tightly and restart the cycle. If the

code reappears, call for service.

dE1

Your washer failed to lock or

unlock the lid.

Close the lid tightly and restart the cycle. If the

code reappears, call for service.

dE1

The door will not unlock. Make sure the lid is ﬁrmly closed.

Push the Power button to turn o your washer,

then turn it on again. If the code reappears, call

for service.

bE2

A jammed Key. Call for service.

Motor not running properly. Restart the cycle pressing the Start/Pause

button. If the code reappears, call for service.

Communication error between

SUB PBA and MAIN PBA.

Call for service.

troubleshooting

English - 33

CODE SYMBOL MEANING SOLUTION

8E2

Mems sensor problem. Call for service.

tE1

Temperature sensor problem. Restart the cycle.

If the code reappears, call for service.

A fault is detected in the water

level sensor.

Call for service.

4E2

This occurs when the temperature

exceeds 50, for over 8 seconds in

the Wool and Delicates cycle.

Call for service.

When position of the clutch can’t

be detected.

Call for service.

PE1

After position of the clutch is

detected, if the signal of the clutch

hall goes wrong, occurs error.

Call for service.

AE6

Commuication error between

INVERTER PBA and MAIN PBA.

Call for service.

For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG).

05 troubleshooting

English - 34

appendix

FABRIC CARE CHART

The following symbols provide garment care direction. The Clothing care labels include symbols for

washing, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures

consistency among garment manufacturers of domestic and imported items. Follow care label directions to

maximize garment life and reduce laundering problems.

Wash Cycle Special Instructions

Warning Symbols for

Laundering

Normal Line Dry/ Hang to Dry Do Not Wash

Permanent Press /

Wrinkle Resistant /

Wrinkle Control

Drip Dry Do Not Wring

Gentle/Delicates Dry Flat Do Not Bleach

Hand Wash Heat Setting Do Not Tumble Dry

Water Temperature**

High

No Steam (added to

iron)

Hot Medium Do Not Iron

Warm Low Dryclean

Cold Any Heat Dry Clean

Bleach

No Heat/Air Do Not Dry Clean

Any Bleach (when

needed)

Iron-Dry or Steam

Temperatures

Line Dry/ Hang to Dry

Only Non-Chlorine

(color-safe)

Bleach (when needed)

High Drip Dry

Tumble Dry Cycle Medium Dry Flat

Normal

Low

Permanent Press/

Wrinkle Resistant/

Wrinkle Control

Gentle/ Delicates

** The dot symbols represent appropriate wash water temperatures for various items. The temperature range for

Hotis105°-125°F/41°-52°C,forWarm85°-105°F/29°-41°CandforCold60°-85°F/16°-29°C.

(Washwatertemperaturemustbeaminimumof60°F/16°Cfordetergentactivationandeectivecleaning.)

The clothes washer can not ensure these temperatures because the actual temperature of the water entering

your washer depends on water heater settings and regional water supply temperatures. For example, cold

waterenteringthehomeinthenorthernstatesduringwintermaybe40°F/4°Cwhichistoocoldforeective

cleaning. In this situation, you will need to adjust the water temperature by selecting a warm setting, adding

some hot water to the MAX FILL line, or using your Washer’s heating option, if available.

English - 35

CYCLE CHART

Use this chart to set the best cycle and options for you laundry.

WA48H7400A*

(



: factory setting,



: selectable)

Course

Functions

Temp. Spin Soil Level

H W EW C TC H M L NS H N L

NORMAL

          

HEAVY DUTY

           

COLORS/DARKS

          

BEDDING

           

DELICATES

       

WATERPROOF

         

PERM PRESS

           

ACTIVE WEAR

         

QUICK WASH

           

SPIN

   

RINSE+SPIN

     

SELF CLEAN

 

Course

Options

AquaJet

Deep Clean

Delay End

Pre Soak

NORMAL

  

HEAVY DUTY

  

COLORS/DARKS

  

BEDDING

 

DELICATES



WATERPROOF

 

PERM PRESS

  

ACTIVE WEAR

  

QUICK WASH



SPIN



RINSE+SPIN

 

SELF CLEAN



Temp. Spin Soil Level

H: Hot

W: Warm

EW: Eco Warm

C : Cold

TC : Tap Cold

H: High

M: Medium

L: Low

NS: No Spin

H: Heavy

N: Normal

L: Light

06 appendix

English - 36

WA45H7200A*

(



: factory setting,



: selectable)

Course

Functions

Temp. Spin Soil Level

H W EW C TC H M L NS H N L

NORMAL

          

HEAVY DUTY

           

COLORS/DARKS

          

BEDDING

           

DELICATES

       

WATERPROOF

         

PERM PRESS

           

ACTIVE WEAR

         

QUICK WASH

           

SPIN

   

RINSE+SPIN

     

SELF CLEAN

 

Course

Options

AquaJet

Delay End

Pre Soak

NORMAL

  

HEAVY DUTY

  

COLORS/DARKS

  

BEDDING

 

DELICATES



WATERPROOF

 

PERM PRESS

  

ACTIVE WEAR

  

QUICK WASH



SPIN



RINSE+SPIN

 

SELF CLEAN



Temp. Spin Soil Level

H: Hot

W: Warm

EW: Eco Warm

C : Cold

TC : Tap Cold

H: High

M: Medium

L: Low

NS: No Spin

H: Heavy

N: Normal

L: Light

appendix

English - 37

WA45H7000A*

(



: factory setting,



: selectable)

Course

Functions

Temp. Spin Soil Level

H W EW C TC H M L NS H N L

NORMAL

          

HEAVY DUTY

           

BEDDING

           

DELICATES

       

WATERPROOF

         

PERM PRESS

           

QUICK WASH

           

SPIN

   

RINSE+SPIN

     

SELF CLEAN

 

Course

Options

Extra Rinse Delay End

Pre Soak

NORMAL

  

HEAVY DUTY

  

BEDDING

  

DELICATES

 

WATERPROOF

  

PERM PRESS

  

QUICK WASH

 

SPIN



RINSE+SPIN

 

SELF CLEAN



Temp. Spin Soil Level

H: Hot

W: Warm

EW: Eco Warm

C : Cold

TC : Tap Cold

H: High

M: Medium

L: Low

NS: No Spin

H: Heavy

N: Normal

L: Light

06 appendix

English - 38

HELPING THE ENVIRONMENT

• Your washer is manufactured from recyclable materials. If you decide to dispose of it, please observe

local waste disposal regulations. Cut o the power cord so that the appliance cannot be connected

to a power source. Remove the lid so that animals and small children cannot get trapped inside the

appliance.

• Do not exceed the detergent quantities recommended in the detergent manufacturers’ instructions.

• Use stain removal products and bleaches before the wash cycle only when necessary.

• Save water and electricity by only washing full loads (the exact amount depends upon the program used).

DECLARATION OF CONFORMITY

This appliance complies with UL2157.

SPECIFICATION

TYPE TOP LOADING WASHER

DIMENSIONS Div Inches (cm)

Height

43.9” (111.5)

B. Width 27.0” (68.6)

C. Height with lid open

58.1” (147.6)

D. Depth 29.3” (74.4)

WATER PRESSURE 20-116 psi (137-800 kPa)

WEIGHT WA48H7400A* 64.0 kg (141.1 lb)

WA45H7200A* 57.0 kg (125.7 lb)

WA45H7000A* 57.0 kg (125.7 lb)

SPIN REVOLUTION WA48H7400A* 1100 rpm

WA45H7200A* 1000 rpm

WA45H7000A* 800 rpm

POWER CONSUMPTION WASHING 120 V 700 W

SPIN 120 V 400 W

DRAIN 120 V 80 W

appendix

English - 39

warranty (U.S.A)

SAMSUNG WASHER

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.

(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by

SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:

One (1) year part and labor, Two (2) years Control Board Parts (Part Only), Three (3) years stainless tub part

(Part Only), Five (5) years washing motor part (Part Only), Ten (10) years washing DD motor part (Part Only).

This limited warranty begins on the original date of purchase, and is valid only on products purchased and

used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem

determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized

service center. The original dated bill of sale must be presented upon request as proof of purchase to

SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service during the

warranty period at no charge, subject to availability within the contiguous United States. In-home service is

not available in all areas.

To receive in-home service, product must be unobstructed and accessible to the service agent. If service

is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized

service center.

SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein,

with new or reconditioned parts or products if found to be defective during the limited warranty period

speciﬁed above. All replaced parts and products become the property of SAMSUNG and must be returned

to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90)

days, whichever is longer.This limited warranty covers manufacturing defects in materials and workmanship

encountered in normal, noncommercial use of this product and shall not apply to the following: damage

that occurs in shipment; delivery and installation; applications and uses for which this product was not

intended; altered product or serial numbers; cosmetic damage or exterior ﬁnish; accidents, abuse, neglect,

ﬁre, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services,

parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied

or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical

line voltage, ﬂuctuations and surges; customer adjustments and failure to follow operating instructions,

maintenance and environmental instructions that are covered and prescribed in the instruction book;

product removal and reinstallation; problems caused by pest infestations. This limited warranty does not

cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house

wiring, cost of a service call for instructions, or ﬁxing installation errors. SAMSUNG does not warrant

uninterrupted or error-free operation of the product.

English - 40

EXCEPT AS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER EXPRESS

OR IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR

PURPOSE.

NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT

TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS

OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY

TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED,

AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE

PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE.

WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS,

DAMAGE, OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR

PROPERTY ARISING OUT OF THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. THIS LIMITED

WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS

PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation

of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This

warranty gives you speciﬁc rights, and you may also have other rights, which vary from state to state.

To obtain warranty service, please contact SAMSUNG at:

Samsung Electronics America, Inc.

85 Challenger Road Ridgeﬁeld Park, NJ 07660

1-800-SAMSUNG (726-7864)

www.samsung.com/us

Visits by a Service Engineer to explain functions, maintenance or installation

is not covered by warranty.

Please contact your Samsung call agent for help with any of these issues.

warranty (U.S.A)

English - 41

warranty (CANADA)

SAMSUNG WASHER

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC.

(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by

SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:

One (1) year part and labor, Ten (10) years washing motor part

This limited warranty begins on the original date of purchase, and is valid only on products purchased

and used in the Canada. To receive warranty service, the purchaser must contact SAMSUNG for problem

determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized

service center. The original dated bill of sale must be presented upon request as proof of purchase to

SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service during the

warranty period at no charge, subject to availability within the Canada. In-home service is not available in all

areas.