Yamaha CL/QL Series StageMix Digital Mixing Console Guía del usuario

Marca: Yamaha

Modelo: CL/QL Series StageMix Digital Mixing Console

Tipo: Guía del usuario

Este manual también es adecuado para

Yamaha CL/QL Series StageMix Digital Mixing Console: La aplicación para iPad que ofrece control remoto de las funciones de la serie de consolas digitales CL/QL de Yamaha con una interfaz gráfica simple e intuitiva que te permite ajustar las mezclas de monitores desde la posición de los artistas en el escenario.

Características:

Conecta y controla de forma remota la serie de consolas digitales CL/QL de Yamaha.
Ajusta las mezclas de monitores desde el escenario.
Aplicación específicamente diseñada para ingenieros de sonido.
Ahorro de tiempo en configuraciones previas a los shows.

Características:

Conecta y controla de forma remota la serie de consolas digitales CL/QL de Yamaha.
Ajusta las mezclas de monitores desde el escenario.
Aplicación específicamente diseñada para ingenieros de sonido.
Ahorro de tiempo en configuraciones previas a los shows.

CL/QL StageMix V8.1/8.5 Supplementary User Guide

Welcome:

Thank you for downloading the “CL/QL StageMix” iPad app for the Yamaha CL/QL

series digital mixing consoles.

This supplementary user guide explains the new features and changes introduced with

CL/QL StageMix V8.1 and V8.5.

StageMix is an application for the Apple iPad that provides remote control of Yamaha

CL/QL series digital mixing console functions via a simple, intuitive graphical interface

from anywhere within wireless range. The software has been specifically designed to

allow engineers to adjust monitor mixes from the performers’ positions on stage, directly

controlling mix parameters via the iPad rather than having to rely on verbal directions to

a second engineer. The result is better mixes in less time; a huge advantage during

high-pressure pre-show setup. Although StageMix is focused on the requirements for

adjusting monitor mixes on stage, its range of features is continually expanding, allowing

it to be used for a wider variety of remote control functions.

NOTE: iOS applications may not be supported in your area. Please check with your

Yamaha dealer.

The latest firmware version for CL/QL series can be downloaded from

http://www.yamahaproaudio.com/

Page 2

CONTENTS

Page

1.0 Disconnect from Console and Return to Start Menu ...................................... 3

2.0 Hide Unused MIX/MATRIX Sends ......................................................................... 5

2.1 Hide Unused in Send on Faders ................................................................... 6

2.2 Hide Unused in Channel SENDS Editor View .............................................. 7

3.0 GEQ and PEQ8 libraries .......................................................................................... 9

Page 3

1. Disconnect from Console and Return to Start Menu

From V8.1 onwards, CL/QL StageMix now supports iOS multi-tasking. As a

result, if StageMix is sent to the background (i.e., if the iPad home button is

pressed during operation), StageMix will automatically attempt to re-connect to

the previously used console IP address whenever StageMix is re-opened.

To connect to a different console IP address, or if the previously console is no

longer available, select the [RETURN TO START MENU] button from the

synchronisation pop-up. This will return StageMix to the Start menu, from which

another console can be selected, or a new console connection can be created.

NOTE: if a long period of time passes between the app being sent to the

background and re-opened, it is likely that iOS will have fully closed the app. In

this instance, StageMix will re-open to the Start menu.

It is also possible to return to the Start menu at any time while using StageMix, by

touching the [Disconnect and Return to Start Menu] button in the top bar of the

SETUP Menu.

Page 4

If StageMix is force-closed via the iPad App Switcher, the next time that StageMix

is launched it will open directly to the Start menu.

However, note that if OFFLINE DEMO is active, if you want to exit and return to

the Start menu for connection to an actual console, either use the [Disconnect

and Return to Start Menu] button in the setup menu or force-close StageMix and

re-launch.

To disconnect StageMix from the current console in order to connect to a

different console, use the [Disconnect and Return to Start Menu] button.

Page 5

2. Hide Unused MIX/MATRIX Sends

This function applies to the following two StageMix views –

• Sends on Faders view

• Channel Sends view

Whenever this function is enabled, any unused Mix or Matrix Sends will be

temporarily hidden from view. The result is that only Sends that are feeding audio

to the selected target Mix or being sent from the selected channel, are displayed.

This allows the user to quickly identify which channels are actually feeding audio

at that moment in time to the target Mix or Matrix, or which Mixes or Matrices the

selected input or Mix channel is sending to.

Which Mix or Matrix Sends are actually hidden when Hide Unused is enabled

depends on the Mode applied in the SETUP menu together with the state of each

Mix or Matrix Send at that moment.

One of the following three modes can be chosen in the Setup Menu (refer to

section 10.0 of the CL/QL StageMix User Guide):

• Send OFF – Mix or Matrix Sends which are currently OFF at the point that

Hide Unused is enabled, will be hidden from view.

• Fader -inf – Mix or Matrix Sends with their levels set to -inf at the point that

Hide Unused is enabled, will be hidden from view.

Page 6

• Fader -inf and Send OFF – Mix or Matrix Sends which are set to OFF and

have level set to -inf at the point that Hide Unused is enabled, will be hidden

from view.

2.1 Hide Unused in Send on Faders

Enter SENDS ON FADERS (refer to section 4.11 in the CL/QL StageMix User

Guide)

To enable Hide Unused, touch the [HIDE UNUSED] button on the left side bar.

When enabled, any unused channel strips are hidden from view and only active

Send Channel strips are displayed in both the main 8 fader view and also in the

top meter bridge.

Page 7

To return to the normal Sends on Faders view and display the send faders for all

channels, disable [HIDE UNUSED] at any time from the left side bar.

NOTE: When changing between target Mix or Matrix Sends, or exiting and re-

entering Sends on Faders, HIDE UNUSED will remain enabled.

2.2 Hide Unused in Channel SENDS Editor View

Navigate to the Channel SENDS Editor view (refer to section 5.9 in the CL/QL

StageMix user guide). To enable HIDE UNUSED, touch the [HIDE UNUSED]

button in the top bar.

When enabled, only unused Mix or Matrix Send faders are hidden from view and

only active faders are displayed, including in the overview scroll area.

Page 8

NOTE: Hide Unused view status will be automatically refreshed after all of

the following operations:

• Scene Recall

• Channel Library recall

• Channel Paste

• Channel Default

• Channel Move

NOTE: Hide Unused view status is not refreshed if any hidden Mix Send is

turned ON and/or the Send Level is raised above -inf should these parameters

be edited directly from the connected console or from another controller. It is

necessary to manually disable and re-enable [HIDE UNUSED] to refresh the

view in StageMix. Hide Unused will remain enabled when navigating between

channels.

Page 9

3. GEQ and PEQ8 libraries

Library Store and Recall for Rack Graphic EQ’s and 8-band Parametric EQ’s

(PEQ8) from CL/QL StageMix is now available.

These Libraries can be accessed from either the Rack View or from a

corresponding Channel Editor where any Rack based processor has been

inserted on the respective channel.

(For Rack access and control, refer to Section 8 of the CL/QL StageMix User

Guide.)

When using a GEQ/PEQ8 via the Rack, the Library can be accessed by touching

the [LIBRARY] button contained within the top bar of StageMix. This will open a

pop-up window which contains a list of all currently stored Libraries of the current

processor type within the console.

Page 10

Select the desired library preset from the list, and touch [RECALL] to apply that

library preset to the current GEQ or PEQ8

To store the current GEQ or PEQ8 settings to a new or existing library preset,

select the library type and preset number and touch [STORE]. Use the keyboard

to apply a name to the preset.

To access these Libraries when using a GEQ or PEQ8 accessed via the Selected

Channel Editor view, touch the [LIBRARY] button in the top left corner. Store and

Library Recall operations are the same as described above.

Page 11

NOTE: As with the console, it is not possible to recall GEQ libraries containing more

than 15 in-use bands to a FLEX15 GEQ.

Page 12

Special Notices

• The software and this User Guide are the exclusive copyrights of Yamaha

Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any

means is expressly forbidden without the written consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the

software and documentation and cannot be held responsible for the results of the use

of this manual and the software.

• The screen displays as illustrated in this User Guide are for instructional purposes,

and may appear somewhat different from the screens which appear on your

computer.

• Future upgrades of application and system software and any changes in

specifications and functions will be announced separately.

• Apple, the Apple logo and iPad are trademarks of Apple Inc., registered in the U.S.

and other countries.

• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries

and is used under license.

• The company names and product names in this User Guide are the trademarks or

registered trademarks of their respective companies.

Yamaha Pro Audio global website

http://www.yamahaproaudio.com/

Yamaha Downloads

https://download.yamaha.com/

Manual Development Group

Published 11/2020 YJMK-A1

Yamaha CL/QL Series StageMix Digital Mixing Console Guía del usuario

Marca: Yamaha

Modelo: CL/QL Series StageMix Digital Mixing Console

Tipo: Guía del usuario

Este manual también es adecuado para

Características:

Conecta y controla de forma remota la serie de consolas digitales CL/QL de Yamaha.
Ajusta las mezclas de monitores desde el escenario.
Aplicación específicamente diseñada para ingenieros de sonido.
Ahorro de tiempo en configuraciones previas a los shows.

Descargar PDF

informe

Yamaha CL/QL Series StageMix Digital Mixing Console Guía del usuario

Este manual también es adecuado para

Yamaha CL/QL Series StageMix Digital Mixing Console Guía del usuario

en otros idiomas

Artículos relacionados