MODEL # BOWL SIZE SINK DEPTH EXTERIOR GAUGE
VGR3218BL
9"
9"
32 1/4"x18 1/2"
18
14 5/8" x 16 1/2"
14 5/8" x 16 1/2"
DIM.
NOMINAL DIMENSIONS
PACKING LIST
- SINK
- CUT-OUT TEMPLATE
- MOUNTING BRACKETS
SINK SPECIFICATIONS
ELONGATED DOUBLE BOWL Undermount
Model VGR3218BL
FEATURED MODELVGR3218BL
9" BOWL DEPTH
FEATURES
18 gauge, stainless steel
304 Nickel - Bearing Content
Long-lasting, easy-to-clean, satin finish
Sound-deadening insulation
Rear drain placement
1
9"
[228 mm]
9 1/4" [235 mm]
TOP VIEW
FRONT VIEW
NOTE: THESE SINKS ARE INTENDED FOR
INDOOR KITCHEN USE ONLY. THEY ARE NOT
RATED FOR OUTDOOR USE. INSTALLATION OF
THIS SINK IN AN OUTDOOR SETTING WILL VOID
ANY WARRANTY ON THIS PRODUCT.
[90 mm]
14 5/8" [370 mm]
14 5/8" [370 mm]
32 1/4" [820 mm]
16 1/2" [420 mm]
18 1/2" [470 mm]
Before you begin:
Please carefully read these instructions.
Unpack and inspect the sink carefully. Do not install the sink if it is damaged.
Save all original packaging and receipts.
Check and follow all local plumbing codes.
General Recommendations:
Read installation and maintenance instructions, thoroughly before installation.
Be sure to use proper tools and always wear personal safety accessories for your protection
Long-Life Care
Vigo Stainless Steel Sinks are easy to keep looking new, longer with minimal care. For best results,
always rinse with a mild soap and wipe after each use. Rub lightly with soft cloth in the direction of the
grain line on a regular basis. To avoid damage and discoloration to the sink surface never use a steel
wool or scouring pad.
Tools and Materials needed:
Tape Measure Denatured Alcohol Mounting clips (included)
Pencil (NOT ink) Ear Protection
Silicone Adhesive Sealant Eye Protection
Rags Hacksaw/Jigsaw
Installation instructions Undermount Sinks
2
Installation Instructions
Please carefully read complete instructions before beginning installation. Only a professional stone
fabricator is qualified to perform this installation.
Note: These instructions are for installation with solid surface, composite material countertops. Vigo
recommends professional countertop installers and is not responsible for damage to the countertop or
sink during installation.
Do not cut the sink opening with traditional saw cut method.
1. Unpack the new sink and check the contents of the materials supplied: Sink, Mounting brackets,
and Cutout template (depending on model). Contact your retailer if any product is damaged or
missing prior to installation. Never install a damaged sink as it can void your warranty.
2. Supplied cutout template provides two options of installation:
A. Flush mount: Sink edge is flush with countertop opening. (FIGURE 1)
B. Reveal mount: Sink rim is exposed approximately 1/4" from the edge of countertop opening.
(FIGURE 2)
Figure 1 Figure 2
3. Cut out the appropriate template for your sink model and desired installation option. Place template
in desired position on countertop, locating center of the bowl over cabinet and faucet holes.
4. Trace the outline of the template and cut countertop along the inside of the line using appropriate
cutting tools. Template is for guide only. Use physical sink to ensure accurate cutout opening.
3
5. Locate the drill holes on the underside of the countertop,
approximately 1" from edge of the sink to be installed.
Holes should be evenly spaced approximately 6" to 8"
apart starting from every corner as shown in Figure 3. It is
recommended to install a faucet at this point before
installing the sink.
Figure 3
!
Countertop
Silicone Caulk
(Not furnished)
Sink
Mounting
Bracket
Fastener
Countertop
Silicone Caulk
(Not furnished)
Sink
Mounting
Bracket
Fastener
6. Loosely attach mounting brackets to the countertop, parallel to
the cutout opening using the supplied mounting screws and
nuts. Mounting screws with brass inserts are supplied with the
sink, however, countertop material vary and the correct type of
fasteners should be recommended by your installer or supplier.
7. Clean sink flange and underside of cutout area of countertop,
making sure that the area is smooth and free of grease. MUST
use 100% silicone for this installation. Apply continuous bead
of silicone caulk evenly on top of sink flange. (FIGURE 4)
NEVER perform this procedure outdoor and under sunlight.
If performed under an extremely hot and dry climate, the
caulking of the sink frame should be performed by two
people at the same time.
8. Position and align sink over the countertop opening and press
sink onto countertop. Turn bent end of mounting bracket to
snug over the sink rim.
9. Check alignment of sink again and tighten fasteners to secure
sink. (FIGURE 5)
10. Wipe away excess silicone caulk with damp cloth. Connect
drain and water supply according to manufacturer's instruction.
Figure 4
Figure 5
4
Care and Maintenance
ALWAYS
preventative cleaning.
affect the appearance of your sink.
abrasive such as Comet.
up over time with a mild solution of vinegar and water followed by a thorough flushing with water.
grain.
NOT RECOMMENDED FOR MIRROR FINISH.
NEVER
develop rust spots in the stainless steel surface.
finish of your sink.
the finish of your sink.
sink. Silver cleaners can also contain acids that will damage the sink surface.
5
KITCHEN SINK LIMITED LIFETIME WARRANTY
EFFECTIVE JANUARY 1, 2010
end-user for personal household use. For commercial uses, additional limitations apply.
VIGO warrants the Product to be free from defects in workmanship and materials under normal use and service for the period commencing from
the initial date of purchase by the owner or end-user, contractor, or builder, from VIGO or an authorized VIGO dealer, through the lifetime of the
original owner or end-user.
Subject to the Warranty Service provision below, any product reported to the authorized dealer or to VIGO as being defective within the warranty
period will be repaired or replaced (with a product of equal value) at the option of VIGO. This warranty extends to the original owner or end-user
and is not transferable to a subsequent owner.
Neither the distributor, authorized VIGO dealer, nor any other person has been authorized to make any affirmation, representation, or warranty
other than those contained in this warranty. Any affirmation, representation, or warranty other than those contained in this warranty shall not be
enforceable against VIGO or any other person.
VIGO reserves the right to modify this warranty at any time, it being understood that such modifications will not alter the warranty conditions
applicable at the time of sale of the products in question.
Limitations
This warranty shall not apply to instances of incorrect operating procedures, breakages, or damages caused by fault through improper installation,
carelessness, abuse, misuse, misapplication, improper maintenance, or alteration of the Product, as well as chemical or natural corrosion,
accident, fire, flood, an act of God, or any other casualty. Avoid abrasive cleaners, steel wools, and harsh chemicals as these will scratch,
damage, and / or dull the product and / or finish and void this warranty. The owner/end-user of the Product covered by the present warranty is
entirely responsible for its proper installation and any applicable plumbing or electrical wiring. VIGO neither installs nor supervises the installation
nor hires a contractor for this purpose; consequently, VIGO cannot be held responsible for any default, breakage, or damages caused thereby or
resulting thereof, either directly or indirectly.
The owner/end-user must provide access to the components of the Product as described in the installation guide so that VIGO can execute the
warranty specified herein. If such access is not available, all expenses to provide said access will be the responsibility of the owner/end-user.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by VIGO and all
applicable rules, regulations, and legislation pertaining to such installations.
This warranty does not apply unless the VIGO Product is installed by fully insured licensed professionals. Vigo strongly recommends that such
licensed professionals have experience in the installation of bathroom and kitchen products. Installation of certain products, including, without
limitation, glass products (i.e., shower doors and glass sinks) by an inexperienced person may result in glass breakage and, consequently, cause
personal injury or death.
VIGO is not liable for personal injuries or deaths to any persons or for any direct, special, incidental, or consequential damage, loss of time, loss of
profits, inconvenience, incidental expenses, labor or material charges, or any other costs resulting from the use of the product or equipment or
pertaining to the application of the present warranty, or resulting from the removal or replacement of any product or element or part covered by
this warranty.
EXCEPT AS OTHERWISE PROVIDED ABOVE, VIGO MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR COMPLIANCE WITH ANY CODE.
In any case, VIGO cannot be held liable for any amount over and above the purchase price paid for the Product by the owner/end-user,
contractor, or builder.
Commercial Limitations
In addition to the above conditions and limitations, the warranty period for products installed for commercial applications or used in commercial
ventures is one (1) year from the initial date of purchase by the owner/end-user, contractor, or builder from an authorized dealer. VIGO is not
responsible for loss of use or profit under any circumstances. If the product is used as a display, the warranty period begins when the product is
placed on display. This warranty gives the owner/end-user specific legal rights. The owner/end-user may also have other rights which can vary
from one state or province to another.
Warranty Service
In order to obtain service provided under this warranty during regular business hours, contact the dealer or distributor who sold the unit, or contact
VIGO directly. VIGO will provide the warranty service described above when the following conditions have been met: the failure is of the nature or
nature of the problem during the warranty period; conclusive evidence (e.g., proof of purchase or installation) is provided to the foregoing by the
user proving that the failure occurred or was discovered within the warranty period; an authorized independent service person or company
representative has been permitted to inspect the product during regular business hours within a reasonable time after the problem was reported
*Certain models are pending approval.
Certification may be ended by VIGO or certification agencies without notice.
6
VGR3218BL
9"
9"
32 1/4"x18 1/2"
18
14 5/8" x 16 1/2"
14 5/8" x 16 1/2"
LISTE DES ARTICLES
- QUINCAILLERIE DE MONTAGE
VGR3218BL
Acier inoxydable de calibre 18
Contenant du nickel 304
Isolation sonore
1
9"
[228 mm]
9 1/4" [235 mm]
[90 mm]
14 5/8" [370 mm]
14 5/8" [370 mm]
32 1/4" [820 mm]
16 1/2" [420 mm]
18 1/2" [470 mm]
INDOOR UTILISATION DE CUISINE SEULEMENT. ILS
NATUREL ANNULE AUCUNE GARANTIE SUR CE
PRODUIT.
VUE DE DESSUS
VUE DE FACE
DIMENSIONS NOMINALES
Veuillez lire attentivement les instructions.
l'installation.
Soin sur le long terme
Attaches de fixation (fournies)
Crayon (PAS d'encre) Protection pour les oreilles
Protection pour les yeux
Chiffons Scie/Scie sauteuse
2
lors de l'installation.
comptoir. (FIGURE 2)
Figure 1 Figure 2
au-dessus des orifices de l'armoire et du robinet.
3
Figure 3
!
Calfeutrage en
silicone
(non fourni)
Support
fixation
Dispositif de fixation
Comptoir
Calfeutrage en
silicone
(non fourni)
Support
fixation
Dispositif de fixation
Vous DEVEZ utiliser de la silicone pure pour cette installation.
Appliquez une bande continue de calfeutrage en silicone sur le
appuyez dessus pour l'enfoncer dans le comptoir. Tournez
Figure 4
Figure 5
4
Entretien
TOUJOURS
et essuyez-le bien.
produit abrasif doux (Comet, par exemple).
vinaigre et d'eau, puis rincez minutieusement avec de l'eau.
sens du grain.
JAMAIS
en acier inoxydable.
5
6
VIGO INDUSTRIES, LLC ("VIGO")
utilisateur final en vue d'un usage personnel domestique. D'autres limitations s'appliquent en cas d'usage commercial.
constructeur.
tiers.
Limitations
directement ou indirectement.
blessures, voire la mort.
constructeur.
Limitations commerciales
Service de garantie
proposition par le client met fin aux obligations de VIGO au titre de la garantie.
VGR3218BL
9"
9"
32 1/4"x18 1/2"
18
14 5/8" x 16 1/2"
14 5/8" x 16 1/2"
CONTENIDOS DEL PAQUETE
FREGADERO
PLANTILLA DE CORTE
ESPECIFICACIONES DEL LAVABO
Modelo VGR3218BL
MODELO DESTACADO VGR3218BL
18 de ancho, acero inoxidable
Aislamiento insonorizante
1
9"
[228 mm]
9 1/4" [235 mm]
NOTA:
PARA USO DE COCINA EN INTERIORES. NO SON
FREGADERO EN UN ESCENARIO AL AIRE LIBRE
PRODUCTO.
[90 mm]
14 5/8" [370 mm]
14 5/8" [370 mm]
32 1/4" [820 mm]
16 1/2" [420 mm]
18 1/2" [470 mm]
DIMENSIONES NOMINALES
MODELO PROFUNDIDAD
NRO. DE TAZON DEL FREGADERO EXTERIOR DIM. ANCHO
VISTA SUPERIOR
VISTA FRONTAL
Antes de comenzar:
Lea con detenimiento estas instrucciones.
Recomendaciones generales:
utilizar las herramientas adecuadas y usar siempre accesorios de seguridad personal para
protegerse.
Cuidado de por vida
lana de acero o trapos abrasivos.
Herramientas y Materiales necesarios:
Alcohol Desnaturalizado
Sellador adhesivo de silicona Gafas protectoras
Trapos
2
compuesto. Vigo recomienda delegar el trabajo a instaladores profesionales de encimeras y no se hace
1. Desempaque el nuevo fregadero y revise el contenido de los materiales suministrados: fregadero,
B. Montaje expuesto: el borde del fregadero queda expuesto alrededor 1/4" desde el borde de la
apertura de la encimera. (FIGURA 2)
Figura 1 Figura 2
gabinete y los orificios del grifo.
4. Con las herramientas de corte apropiadas, marque el contorno de la plantilla y corte la encimera
de que la apertura del corte sea precisa.
3
5. Ubique los orificios de taladrado en la parte inferior de la
encimera, a alrededor de 1" del borde del fregadero que va a
alrededor de 6" a 8" desde cada una de las esquinas, como se
muestra en la Figura 3. Se recomienda instalar un grifo en este
momento, antes de instalar el fregadero.
Figura 3
!
Encimera
Calafate de silicona
(no incluido)
Fregadero
Soporte
Tornillo
Encimera
Calafate de silicona
(no incluido)
Fregadero
Soporte
Tornillo
6. Con los tornillos y las tuercas de montaje incluidos, coloque sin
ajustar los soportes en la encimera, en paralelo a la apertura del
corte. El fregadero viene con tornillos de montaje con injertos de
instalador o proveedor deben recomendarle el tipo de tornillos
correcto.
reborde continuo de calafate de silicona de manera pareja sobre
la parte superior del reborde del fregadero. (FIGURA 4) NUNCA
lleve a cabo este procedimiento al aire libre y bajo la luz del sol. Si
se lo lleva a cabo en un clima en extremo caluroso y seco, el
personas al mismo tiempo.
8. Coloque y alinee el fregadero sobre la apertura de la encimera
ajustarlo sobre el borde del fregadero.
tornillos para fijarlo. (FIGURA 5)
instrucciones del fabricante.
Figura 4
Figura 5
4
5
Cuidado y Mantenimiento
SIEMPRE
una mayor limpieza preventiva.
Comet.
NO SE RECOMIENDA HACERLO EN ACABADOS BRILLANTES.
NUNCA
acero inoxidable.
demasiado largo pues puede arruinar el acabado.
tiempo demasiado largo pues pueden arruinar el acabado.
la superficie del fregadero.
VIGO INDUSTRIES, LLC ("VIGO")
la fecha de compra inicial por parte del propietario/ usuario final, contratista o constructor a VIGO o a un distribuidor autorizado de VIGO y durante toda la vida del
propietario o usuario final originales.
otras personas.
Limitaciones
indirecta.
propietario/usuario final.
incluidos, entre otros, productos de vidrio (es decir, puertas de duchas y lavabos de vidrio) por parte de personas sin experiencia puede provocar ruptura del vidrio y,
por ende, lesiones personales o la muerte.
abonaran por el Producto.
Limitaciones comerciales
6
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
Vigo VG15331 Guía de instalación
- Tipo
- Guía de instalación
En otros idiomas
- English: Vigo VG15331 Installation guide
