Canon PIXMA G620 Guía de inicio rápido

Categoría
Impresión
Tipo
Guía de inicio rápido
Lea primero Información de seguridad
e información importante (apéndice).
Guía de inicio
Getting Started
Read Safety and Important Information
(addendum) first.
Cómo sujetar la impresora
Conexión con un ordenador, teléfono inteligente o tableta ....................... página 6
Instalación de la impresora ...............................................................................................página 1
Installing the Printer ...................................................................................................................page 1
Connecting to a Computer, Smartphone or Tablet ............................................... page 6
Holding the Printer
1
ENGLISH
Setting Up the Printer
1. Box Contents
Print Heads
Ink Bottles
Power Cord
Safety and Important Information
Getting Started (this manual)
2. Removing Packing Materials
1
Remove and dispose of any packing materials
and orange tape.
2
Open the scanning unit / cover, remove and
dispose of the orange tape and protective
material inside.
a
b
3. Installing the Print Heads
1
Open the print head locking cover.
2
Take out each print head from the package and
remove the label.
3
Remove the orange tape.
For Setup, visit the URL
https://ij.start.canon/G620
or scan the code with your mobile device
Follow the instructions below if you do not have an internet connection.
2
Setting Up the Printer
4
Insert the L print head on the left and the R print
head on the right.
5
Close the print head locking cover and press
down until it clicks.
6
Press down both joint buttons completely until
they click.
Check!
7
Close the scanning unit / cover.
Open the scanning unit / cover fully and then close it.
b
a
Caution
Watch your ngers.
4. Turning on the Printer
1
Connect the power cord.
Back
2
Press the ON button.
3
When the following screen appears, use the [
and ] buttons to select a language, and then
press the OK button.
Important
If an error appears on the screen, see "If an error message
(support code) appears on the screen" on page 5 and
follow the instructions.
3
ENGLISH
5. Pouring Ink
Important
This product requires careful handling of ink. Ink may splatter
when the ink tanks are lled with ink. If ink gets on your clothes or
belongings, it may not come o.
1
Open the scanning unit / cover.
2
Open the gray tank cap on the left of the printer.
3
Hold the GY (gray) ink bottle upright and gently
twist the bottle cap to remove.
Check!
GY
4
Align the nozzle of the ink bottle with the inlet.
5
Slowly stand the ink bottle upside down and
push down to pour the ink.
If the ink does not pour, gently remove the ink bottle
and try again.
a
b
6
Gently remove the ink bottle from the inlet.
Be careful not to spill the ink.
a
b
7
Replace the tank cap securely.
4
Setting Up the Printer
8
Repeat steps 2 through 7 to pour all ink for all
colors into the ink tanks for each color.
Pour the supplied ink that matches the color of the
tank cap.
C M YRGY BK
Check!
9
Close the scanning unit / cover.
Open the scanning unit / cover fully and then close it.
b
a
Caution
Watch your ngers.
10
Use the [ and ] buttons to select Yes , and
then press the OK button.
6. Loading Paper
1
Use the [ and ] buttons to select Yes , and
then press the OK button.
2
Extend the paper support.
a
b
3
Open the feed slot cover and slide the right-
hand side paper guide to the far right.
a
b
4
Load paper.
Load 2 or more sheets of Letter or A4 sized plain
paper.
Slide the side paper guide against the edge of the
paper stack.
a
b
5
Close the feed slot cover.
5
ENGLISH
6
Extend the paper output tray.
7
Follow the on-screen instructions, and then
press the OK button.
Please wait momentarily until the following screen
appears.
Select the connection method that best matches how you
will use the printer.
To use the printer without connecting to any other
devices
Setup is now complete.
To use the printer connecting to a computer or
smartphone
Proceed to the next page.
Check the support code, and then follow the
instructions if the displayed code is written below.
1890
Protective material remaining.
"2. Removing Packing Materials" on page 1
1470/1471
Print heads are not installed correctly.
"3. Installing the Print Heads" on page 1
1474
Print heads are not installed correctly.
Close the ink valve lever, and swap the left and right print
heads.
a
cb
"3. Installing the Print Heads" on page 1
5200
Ink system preparation was not completed successfully.
Press the ON button to restart the printer, and then see "5.
Pouring Ink" on page 3.
For all other cases, refer to the Online Manual.
If an error message (support code) appears on
the screen
Support code
7-a
6
Setting Up the Printer
Computer Smartphone
Computer and
smartphone
Connecting to a Computer
If you are using multiple computers, perform these steps on each computer.
1
Access the Canon website from your computer.
2
Select Set Up.
3
Enter your printer's model name and click Go.
4
Click Start.
5
Click (B) Connecting to a Computer/Smartphone.
The following steps are for Windows users.
6
Click Download.
7
Run the downloaded file.
Follow the on-screen instructions. This may take some time.
To connect to a smartphone as well, see "7-b. Connecting to a Smartphone" on page 7.
What device are you connecting?
7-a. Connecting to a Computer
7-b
7
ENGLISH
1
Install the "Canon PRINT Inkjet/SELPHY" app on your smartphone.
Search for "Canon PRINT" in App Store, or Google Play.
Access the Canon website to download the app.
2
Open your smartphone's Wi-Fi settings. Check that the network name (SSID) that starts
with "Canon_ij_" appears.
(Example of iOS screen)
The network name (SSID) that starts with "Canon_ij_"
If "Canon_ij_" appears Proceed to step
3
.
If "Canon_ij_" does not appear Proceed to step
4
.
3
Tap the network name (SSID) that starts with "Canon_ij_".
4
Open the installed app, and follow the on-screen instructions in the app to add your
printer.
Connecting to a Smartphone
If you are using multiple smartphones, perform these steps on each smartphone.
7-b. Connecting to a Smartphone
Once you have added your printer, you can print from your smartphone.
To print photos, see "Loading Photo Paper" on page 8.
8
1
Extend the paper support.
a
b
2
Open the feed slot cover and slide the right-
hand side paper guide to the far right.
a
b
3
Load several sheets of photo paper with the
print side facing up and slide the side paper
guide against the edge of the paper stack.
b
a
4
Close the feed slot cover.
5
When Save the rear tray paper information
appears on the printer's screen, press the OK
button.
6
Select the paper size and type, and press the OK
button.
7
Extend the paper output tray.
Transporting Your Printer
When relocating the printer, check the following. Refer to the Online Manual for details.
Check that both joint buttons are pressed down
completely to avoid ink leaks.
Check that the position of the ink valve lever is closed.
Pack the printer in a plastic bag in case ink leaks.
Pack the printer in a sturdy box so that it is placed with its
bottom facing down, using sucient protective material
to ensure safe transport.
Do not tilt the printer. Ink may leak.
Please handle with care and ensure the box remains at
and NOT turned upside down or on its side, as the printer
may be damaged and ink in the printer may leak.
When a shipping agent is handling transport of the
printer, have its box marked "THIS SIDE UP" to keep the
printer with its bottom facing down. Mark also with
"FRAGILE" or "HANDLE WITH CARE".
Loading Photo Paper
1
ESPAÑOL
Instalación de la impresora
1. Contenido de la caja
Cabezales de impresión
Frascos de tinta
Cable de alimentación
Información de seguridad e
información importante
Guía de inicio (este manual)
2. Retirar los materiales de
protección
1
Retire y tire los materiales de protección y la
cinta naranja.
2
Abra la cubierta/unidad de escaneado, retire y
tire la cinta naranja y el material de protección
que hay dentro.
a b
3. Instalar los cabezales de
impresión
1
Abra la cubierta de bloqueo del cabezal de
impresión.
2
Saque cada cabezal de impresión del paquete y
retire la etiqueta.
3
Retire la cinta naranja.
Para la configuración, visite la URL
https://ij.start.canon/G620
o bien escanee el código con su dispositivo móvil
Siga las instrucciones que se proporcionan a continuación si no tiene conexión a Internet.
2
Instalación de la impresora
4
Inserte el cabezal de impresión L a la izquierda y
el cabezal de impresión R a la derecha.
5
Cierre la cubierta de bloqueo del cabezal de
impresión y presione hacia abajo hasta que
haga clic.
6
Presione hacia abajo los dos botones de unión
completamente hasta que hagan clic.
¡Comprobar!
7
Cierre la cubierta/unidad de escaneado.
Abra la cubierta/unidad de escaneado
completamente y luego ciérrela.
b
a
Precaución
Tenga cuidado con los dedos.
4. Encender la impresora
1
Conecte el cable de alimentación.
Atrás
2
Pulse el botón ACTIVADO (ON).
3
Si aparece la siguiente pantalla, use los botones
[ y ] para seleccionar el idioma y pulse el
botón OK.
Importante
Si aparece un error en la pantalla, consulte "Si se muestra un
mensaje de error (código de asistencia) en la pantalla" en la
página 5 y siga las instrucciones.
3
ESPAÑOL
5. Verter la tinta
Importante
Este producto requiere un tratamiento cuidadoso de la tinta, ya que
puede salpicar cuando se rellenan de tinta los depósitos de tinta.
Es posible que las manchas de tinta no salgan de la ropa u otras
pertenencias.
1
Abra la cubierta/unidad de escaneado.
2
Abra la tapa del depósito gris de la izquierda de
la impresora.
3
Sujete el frasco de tinta GY (gris) hacia arriba y
gire suavemente la tapa del frasco para retirarla.
¡Comprobar!
GY
4
Alinee la boquilla del frasco de tinta con la
entrada.
5
Coloque lentamente el frasco de tinta boca
abajo y empuje hacia abajo para verter la tinta.
Si la tinta no se vierte, retire suavemente el frasco de
tinta e inténtelo de nuevo.
a
b
6
Retire suavemente el frasco de tinta de la
entrada.
Tenga cuidado de no derramar la tinta.
a
b
7
Vuelva a colocar la tapa del depósito
firmemente.
4
Instalación de la impresora
8
Repita los pasos del 2 al 7 para verter toda la
tinta de todos los colores en los depósitos de
tinta para cada color.
Vierta la tinta suministrada que coincide con el color
de la tapa del depósito.
C M YRGY BK
¡Comprobar!
9
Cierre la cubierta/unidad de escaneado.
Abra la cubierta/unidad de escaneado
completamente y luego ciérrela.
b
a
Precaución
Tenga cuidado con los dedos.
10
Use los botones [ y ] para seleccionar Sí (Yes)
y, a continuación, pulse el botón OK.
6. Carga del papel
1
Use los botones [ y ] para seleccionar Sí (Yes)
y, a continuación, pulse el botón OK.
2
Extienda el soporte del papel.
a
b
3
Abra la cubierta de la ranura de alimentación
y deslice la guía del papel del lado derecho
totalmente hacia la derecha.
a
b
4
Cargue el papel.
Cargue 2 o más hojas de papel Carta o papel normal
de tamaño A4.
Deslice la guía del papel lateral contra el borde de la
pila de papel.
a
b
5
Cierre la cubierta de la ranura de alimentación.
5
ESPAÑOL
6
Extienda la bandeja de salida del papel.
7
Siga las instrucciones en pantalla y luego pulse
el botón OK.
Espere un momento hasta que aparezca la siguiente
pantalla.
Seleccione el método de conexión que mejor se adapte al
uso de la impresora.
Para usar la impresora sin conectar con ningún otro
dispositivo
Ha nalizado la conguración.
Para usar la impresora conectándola a un ordenador o
un teléfono inteligente
Continúe a la página siguiente.
Compruebe el código de asistencia y después siga las
instrucciones si el código que se muestra está escrito a
continuación.
1890
Material de protección restante.
"2. Retirar los materiales de protección" en la página 1
1470/1471
Los cabezales de impresión no están instalados
correctamente.
"3. Instalar los cabezales de impresión" en la página 1
1474
Los cabezales de impresión no están instalados
correctamente.
Cierre la palanca de válvula de tinta e intercambie los
cabezales de impresión izquierdo y derecho.
a
cb
"3. Instalar los cabezales de impresión" en la página 1
5200
La preparación del sistema de tinta no se ha completado
correctamente.
Pulse el botón ACTIVADO (ON) para reiniciar la impresora y,
a continuación, consulte "5. Verter la tinta" en la página 3.
Para los demás casos, consulte el Manual en línea.
Si se muestra un mensaje de error (código de
asistencia) en la pantalla
Código asist.
(Support code)
7-a
6
Instalación de la impresora
Ordenador Teléfono inteligente
Ordenador y
teléfono inteligente
Conectar al ordenador
Si utiliza varios ordenadores, realice estos pasos en cada ordenador.
1
Acceda al sitio web de Canon desde el ordenador.
2
Seleccione Configurar.
3
Escriba el nombre del modelo de su impresora y haga clic en Ir.
4
Haga clic en Iniciar.
5
Haga clic en (B) Conexión con un ordenador/teléfono inteligente.
Los siguientes pasos son para usuarios de Windows.
6
Haga clic en Descargar.
7
Ejecute el archivo descargado.
Siga las instrucciones que aparezcan en pantalla. Esto puede llevar algún tiempo.
Para conectar con un teléfono inteligente también, consulte "7-b. Conexión con un teléfono
inteligente" en la página 7.
¿Qué dispositivo va a conectar?
7-a. Conectar al ordenador
7-b
7
ESPAÑOL
1
Instale la aplicación "Canon PRINT Inkjet/SELPHY" en su teléfono inteligente.
Busque "Canon PRINT" en App Store o Google Play.
Acceda al sitio web Canon para descargar la aplicación.
2
Abra la configuración de Wi-Fi de su teléfono inteligente. Compruebe que aparezca el
nombre de red (SSID) que empieza con "Canon_ij_".
(Ejemplo de la pantalla de iOS)
El nombre de red (SSID) que empieza con "Canon_ij_"
Si se muestra "Canon_ij_" continúe en el paso
3
.
Si no se muestra "Canon_ij_" continúe en el paso
4
.
3
Toque el nombre de red (SSID) que empieza con "Canon_ij_".
4
Abra la aplicación instalada y luego siga las instrucciones en la aplicación para agregar
su impresora.
Conexión con un teléfono inteligente
Si utiliza varios teléfonos inteligentes, realice estos pasos en cada teléfono inteligente.
7-b. Conexión con un teléfono inteligente
Cuando haya agregado la impresora, podrá imprimir desde su teléfono inteligente.
Para imprimir fotos, consulte "Carga de papel fotográfico" en la página 8.
8
1
Extienda el soporte del papel.
a
b
2
Abra la cubierta de la ranura de alimentación
y deslice la guía del papel del lado derecho
totalmente hacia la derecha.
a
b
3
Cargue varias hojas de papel fotográfico con la
cara de impresión hacia arriba y deslice la guía
del papel lateral contra el borde de la pila de
papel.
b
a
4
Cierre la cubierta de la ranura de alimentación.
5
Cuando se muestre Registre la información de
papel de la bandeja posterior (Save the rear
tray paper information) en la pantalla de la
impresora, pulse el botón OK.
6
Seleccione el tipo y tamaño de papel y pulse el
botón OK.
7
Extienda la bandeja de salida del papel.
Transporte de la impresora
Cuando vaya a transportar la impresora, compruebe lo siguiente. Consulte el Manual en línea para obtener más información.
Compruebe que ambos botones de unión se hayan
presionado hacia abajo completamente para evitar
derrames de tinta.
Compruebe que la palanca de válvula de tinta esté en la
posición cerrada.
Embale la impresora en una bolsa de plástico por si hay
derrames de tinta.
Embale la impresora en una caja resistente y de modo
que no quede boca abajo. Utilice suciente material de
protección para garantizar un transporte seguro.
No incline la impresora. De lo contrario, es posible que la
tinta se derrame.
Manipule con cuidado y asegúrese de que la caja
permanece en una supercie plana y que NO se coloca
boca abajo o de lado, ya que la impresora podría dañarse
y la tinta de la impresora, derramarse.
Cuando se ocupe del transporte de la impresora una empresa
de mensajería, marque la caja con "ESTE LADO ARRIBA" para
mantener la impresora con la parte inferior abajo. Márquela
también con "FRÁGIL" o "MANEJAR CON CUIDADO".
Carga de papel fotográfico
How-To Video Library
Videoteca sobre procedimientos
Marcas comerciales
Windows es una marca comercial o marca comercial registrada de Microsoft Corporation, registrada en EE.UU. y/o en otros países.
App Store es una marca comercial de Apple Inc., registradas en EE.UU. y en otros países.
Google Play es una marca comercial registrada de Google LLC.
Trademarks
Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
App Store is a trademark of Apple Inc., registered in the U.S. and other countries.
Google Play is a registered trademark of Google LLC..
RMC (Regulatory Model Code): K10530
Desde su navegador
Acceso al Manual en línea
Access Online Manual
From your browser
PRINTED IN XXXXXXXX
© CANON INC. 2020XXXXXXXXQT6-4022-V01
1 / 1

Canon PIXMA G620 Guía de inicio rápido

Categoría
Impresión
Tipo
Guía de inicio rápido

En otros idiomas