Yamaha MOTIF XF7 EDITOR El manual del propietario

Marca: Yamaha

Modelo: MOTIF XF7 EDITOR

Categoría: Equipo musical

Tipo: El manual del propietario

MOTIF XF Editor Owner’s Manual 1

Contents

What is the MOTIF XF Editor? .................................................2

Studio Manager.........................................................................2

Studio Connections..................................................................2

About Open Plug-in Technology.............................................3

Data Structure of the MOTIF XF Editor ...................................4

Starting the MOTIF XF Editor ..................................................5

An Example of MOTIF XF Editor in Use..................................7

MOTIF XF Editor Window.......................................................13

Basic Operations....................................................................35

Menu ........................................................................................37

Troubleshooting .....................................................................53

• Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for

your personal use.

• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without

the written consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot

be held responsible for the results of the use of this manual and the software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat

different from the screens which appear on your computer.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their

respective companies.

• Click on the red

-colored text to jump to the related item in this manual.

This owner’s manual assumes that you are already familiar with basic Windows/Mac operations. If you are not,

please refer to the owner’s manual which came with your Windows/Mac software before using the MOTIF XF Editor.

For information about hardware requirements, the interconnection of devices and the installation of the MOTIF XF

Editor software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective MIDI

device.

MOTIF XF Editor

Owner’s Manual

MOTIF XF Editor

Owner’s Manual

What is the MOTIF XF Editor?

MOTIF XF Editor Owner’s Manual

What is the MOTIF XF Editor?

MOTIF XF Editor is a convenient tool which lets you edit and save the various parameters of your MOTIF XF

tone generator. These include Voice and Mixing parameters (edited in the Voice or Mixing mode of the

MOTIF XF) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-understand

graphical interface, you can edit various parameters of the MOTIF XF right from your computer — using the

mouse to adjust the virtual knobs, sliders, and buttons and entering values from the computer keyboard.

Finally, all the changes you have made can be saved to your computer or transmitted to the MOTIF XF

instrument.

You can use this MOTIF XF Editor as a plug-in for the software below

• Studio Manager

• DAW application software compatible with Studio Connections

The MOTIF XF Editor lets you adjust the hue as desired (page 6). This manual uses example screen shots

having the most universal color visibility, allowing the manual to be easily viewed by many people having

different types of color recognition.

Studio Manager

Studio Manager V2 is a cross-platform application that enables you to start multiple Editors for controlling

Yamaha hardware products remotely, and to save multiple Editor settings. You can run Studio Manager as a

stand-alone application, or as a plug-in within DAW applications compatible with Studio Connections such

as Cubase or Cubase AI.

For more information, refer to the Studio Manager PDF manual.

Studio Connections

Studio Connections is a joint project begun by Steinberg and Yamaha.

Music production systems now increasingly rely on both software and

hardware, and there is a pressing need for closer integration between the

two. Studio Connections provides a comprehensive and seamless music

production environment — making the use of hardware and software both

easier and much more efficient. The following functions are available in

Studio Connections.

Recall

With the Recall function, all settings in each Editor can be saved within Studio Manager, and then called up

again when needed. This enables you to recall all the settings of multiple devices from Studio Manager and

control the entire system easily, instantly and automatically.

Recall is especially convenient when used with a DAW application compatible with Studio Connections. This

lets you save the Editor data directly to the project file of the DAW letting you recall all necessary hardware

settings automatically by simply opening the project file.

When executing the Recall function in the Studio Manager, the parameter settings of either device (MOTIF XF or

DAW software on a computer) are synchronized with the other. You can determine which device (MOTIF XF or DAW

software) is regarded as the master of the parameter settings by setting the Auto Sync Setting (page 41).

About Open Plug-in Technology

MOTIF XF Editor Owner’s Manual

Audio Integration

Plug-in software such as software synthesizers and software samplers are exceptionally convenient in that

they let you easily change the various settings and parameters within the host application. However, control

over hardware is not so easy — with the need for various setups such as audio connections, driver settings

and MIDI port connections.

By using a Studio Connections-compatible DAW software, you can control the external hardware synthesizer

within the application, without the need to set up complex connections within a DAW software application —

just as easily and conveniently as you would with plug-in software. The Audio Integration function makes all

this possible. For details about Recall and Audio Integration, visit our web site at:

http://www.studioconnections.org/

About Open Plug-in Technology

Open Plug-in Technology (OPT) is a software format that enables you to control MIDI devices from a music

DAW application software. For example, this allows you to start up and operate various parts of your music

system, such as voice editors of the synthesizer and mixing control editors — directly from an OPT-

compatible software, without having to use each separately. OPT also makes it unnecessary to set MIDI

drivers for each application, streamlining your music production system and making all operations more

convenient and seamless.

In addition to the original OPT, Open Plug-in Technology Version 2 (OPT 2), designed for Studio Connections,

is also available. The host application Studio Manager supports OPT 2.

About the OPT 2 Overview

OPT 2 is a plug-in format that enhances OPT Level 1 (Panels) and adds some convenient

functions for Studio Connections.

Plug-in software compatible with OPT 2 is indirectly

connected to the DAW application compatible with

Studio Connection, via the Studio Manager.

Host

Application

Editor

Studio

Manager

OPT 2

Data Structure of the MOTIF XF Editor

MOTIF XF Editor Owner’s Manual

Data Structure of the MOTIF XF Editor

The MOTIF XF Editor lets you create the following data and save them as a single file (extension: X3E).

• Current Global data (latest status of edited global parameters)

• Current data in the Voice mode (latest status of edited Voice)

• Current data in the Song/Pattern mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices)

• User Voice data (consisting of three Normal Voice Banks and one Drum Voice Bank)

Current settings includes the latest settings of the Common and Element parameters for the Voice last assigned to

each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for

each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The MOTIF

XF Editor lets you edit parameters (including Element parameters) of the Voice assigned to each Part and save the

latest edit status as a file without storing it as a User Voice or a Mixing Voice. This means that you can easily recall

the latest status of the previous edit simply by opening the file.

n The MOTIF XF Editor handles the Global data which includes some of the parameters shown on the “G” row in the Mixer

section and all the parameters in the Global Settings of the Parameter Category section (pages 21 and 24).

The diagram illustrated below indicates the structure of the data created via the MOTIF XF Editor, the

structure of the data stored in the internal memory of the MOTIF XF instrument and the relationship between

those two types of data.

*1 When the MOTIF XF instrument is connected to the computer properly with the ONLINE status, editing a parameter on the MOTIF XF Editor affects the same parameter on the MOTIF XF itself, and

vice versa.

*2 The Store Voice operation on the Editor will store the Voice data to the memory of the MOTIF XF instrument as well as the memory of the Editor.

*3 The Store Global operation and Store Mixing operation will store the data only to the memory of the MOTIF XF instrument.

MOTIF XF Editor (computer)

Current Global data

Current data in the Voice mode

Current data in the Song or

Pattern mode

• Mixing data

• Multi Common data

Part Voice data

(16 Voices)

Mixing Voice data

(16 Voices)

Store Voice

(page 48)

Store Voice

(page 48)

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Normal User 4 (128 Voices)

• Drum User (32 Voices)

Editor file

(Extension: .X3E)

Data sync

Current Global data

Current data in the Voice mode

Current data in the Song or

Pattern mode

• Mixing data

• Multi Common data

Global data

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Normal User 4 (128 Voices)

• Drum User (32 Voices)

Part Voice data

(16 Voices)

Mixing data

• Multi Common data

Mixing Voice data

(16 Voices)

Store Voice

(page 48)

Store Voice

(page 48)

Store Voice

(page 48)

Store Mixing

(page 49)

Store Global

(page 48)

MOTIF XF instrument

Store Voice

(page 48)

Starting the MOTIF XF Editor

MOTIF XF Editor Owner’s Manual

Starting the MOTIF XF Editor

Install the driver (USB-MIDI driver or Yamaha Steinberg FW Driver), Studio Manager and MOTIF XF Editor by

following the respective Installation Guides, then install the host application such as Cubase if necessary.

After making the required connection and setting the MIDI IN/OUT parameter to “USB” or “FW” in the Utility

mode, follow the instructions below to start the MOTIF XF Editor.

n For details about connection between the MOTIF XF and a computer, refer to the Owner’s Manual of the MOTIF XF.

1. Start the Studio Manager.

Studio Manager can be started as a plug-in within a Studio Connections-compatible DAW software, or

can be started as a stand-alone application.

2. Set the MIDI Ports.

When starting Studio Manager as a stand-alone application:

Set the MIDI Ports by calling up the MIDI Ports window via [File]  [Setup] ([SM2]  [Preference] for

Mac)  [MIDI Settings]. When the connection is done via a USB cable, enter the checkmarks to the

boxes of Ports 1 and 4 for the MOTIF XF in both the Input Ports and the Output Ports, as illustrated

below. When connection is made via the IEEE1394 cable, enter checkmarks to the boxes of the Ports

corresponding to the Main of the MOTIF XF, in both the Input Ports and the Output Ports.

When starting Studio Manager as a plug-in:

Set the MIDI Ports on the DAW application. For details, refer to the manual of your DAW application.

When connecting the MOTIF XF to a computer via a USB cable, the MIDI Ports are automatically set

simply by starting Studio Manager from Cubase or Cubase AI. This is also true when connecting the

MOTIF XF to a computer via an IEEE1394 cable and installing “Extensions for Steinberg DAW” to the

computer.

3. Start the MOTIF XF Editor from the window of the Studio Manager.

For details, refer to the Installation Guide and the PDF manual of the Studio Manager.

When using Studio Manager as a plug-in with the Audio Integration features of Studio Connections

(within a compatible DAW), you can start the MOTIF XF Editor just as you would any other software

synthesizer. For details, visit the following web site.

http://www.studioconnections.org/

Starting the MOTIF XF Editor

MOTIF XF Editor Owner’s Manual

Adjusting the hue of the display

The MOTIF XF Editor lets you adjust the hue as desired.

1. At the left bottom of the Editor window, click the triangle button to call up the slider.

Click the triangle button again to close the slider.

2. Drag or click the slider to adjust the hue.

In Windows, to reset the hue to its default, simultaneously hold down the <Ctrl> key and click on the

slider.

On the Mac, to reset the hue to its default, simultaneously hold down the <Command> key and click

on the slider.

For details about slider operation, refer to page 36.

An Example of MOTIF XF Editor in Use: Editing in the Voice mode

MOTIF XF Editor Owner’s Manual

An Example of MOTIF XF Editor in Use

There is no single way to use the many components in the MOTIF XF Editor. Your editing needs and

preferences may differ; however, the following example gives you a simple step-by-step guide in how to use

the MOTIF XF Editor. As an example, this section explains how to edit a Voice in the Voice mode, edit a

Mixing program in the Song mode, then store the edited data to the memory of the MOTIF XF instrument and

save the final results of your editing to a file.

Editing in the Voice mode

n If the [Song] or [Pattern] indication (at the top left of the display) is on, perform the instructions below from step 1. If the

[Voice] indication is on, perform the instructions below from step 2.

1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left of

the display).

If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync

window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you

should proceed to step 3.

2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE]

indication is set to [OFFLINE].

3. On the Auto Sync window, set communication-related parameters such as Input Port,

Output Port and Device Number in the Data Port section, then set the direction of Data

Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section.

When you want to use the settings on the MOTIF XF itself as starting data for editing, set the boxes of

Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to the

computer. To use the settings on the MOTIF XF Editor as starting data, set both Global, Current and

Voice to the opposite, so that the arrow indicates data flow from the computer to the keyboard. For

details, see page 40.

NOTICE

• Keep in mind that when you set Global, Current and Voice to On, enable data sync from the computer to the MOTIF

XF (instrument), and then click the [Start] button at the bottom, this operation transmits these types of data

currently on the Editor to the MOTIF XF itself, automatically overwriting and erasing all the corresponding data

already existing on memory of the MOTIF XF instrument. When you want to use the settings on the MOTIF XF itself

as starting data for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that the

data flows from the instrument to the computer.

• Make sure to set the desired data transfer direction in order to avoid data loss.

• Any data which was overwritten and lost accidentally cannot be recovered.

An Example of MOTIF XF Editor in Use: Editing in the Voice mode

MOTIF XF Editor Owner’s Manual

4. From the Auto Sync window, click [Start] at the bottom.

The data synchronization will be started if the Port settings are correct. As soon as data synchronization

is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE

indication automatically. In this ONLINE status, editing a parameter on the MOTIF XF Editor affects the

same parameter on the MOTIF XF itself, and vice versa.

For more information, refer to “ONLINE/OFFLINE” on page 13.

5. Edit the Voice in the Voice mode.

5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the

VOICE LIBRARY window.

5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to

the current Part.

You can confirm the sound of the selected Voice by clicking any note on the virtual keyboard or the

MOTIF XF keyboard.

5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY

window.

You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of

the window. By executing this operation, the Voice selection is reset to the original status and the VOICE

LIBRARY window closes.

NOTICE

When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store

the edits, make sure to store the Voice by using the Store window (page 48) before changing the Voice.

An Example of MOTIF XF Editor in Use: Editing in the Voice mode

MOTIF XF Editor Owner’s Manual

5-4 Edit the Voice parameters as desired.

Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them.

To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the

MOTIF XF keyboard.

To make detailed settings of the selected Voice, click the arrow button at the top of the right panel

next to the main window to call up the Detailed Parameter section.

n For details about Voice parameters, refer to “Editing a Normal Voice” and “Editing a Drum Voice” in the

Reference Manual.

6. Store the edited settings as a User Voice, as necessary.

6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 48).

6-2 Select a Voice Bank from the following list:

• Normal User 1

• Normal User 2

• Normal User 3

• Normal User 4

• Drum User

n Normal User 1 – 4 are shown in the Store window when editing the Normal Voice while Drum User is shown in

the Store window when editing the Drum Voice.

An Example of MOTIF XF Editor in Use: Mixing edit in the Song or Pattern mode

MOTIF XF Editor Owner’s Manual

6-3 Open the selected Bank, select the desired number as destination, then enter the name

of the Voice in the box at the top of this window.

6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank.

Performing this operation will store the Voice data to the User Voice Bank in the MOTIF XF instrument as

well as that within the Editor.

NOTICE

When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument)

will be overwritten. Select the destination Voice number carefully to prevent important data from being erased

accidentally. For this reason, important data should always be saved to a separate USB storage device.

n You can store the settings of the parameters in the “G” row except for the Chorus and Reverb settings by

clicking [Store Global] under [Edit] in the menu bar.

Mixing edit in the Song or Pattern mode

This section explains how to edit a Mixing program in the Song mode.

1. Change the mode to the Song mode by clicking [Song] of the [Voice]/[Song]/[Pattern]

indication.

The Auto Sync appears automatically during ONLINE status.

2. From the Auto Sync window, click [Start] at the bottom.

Data synchronization will be started if the Port settings are correct. As soon as data synchronization is

completed, the Auto Sync window is closed.

An Example of MOTIF XF Editor in Use: Mixing edit in the Song or Pattern mode

MOTIF XF Editor Owner’s Manual

3. Edit the parameters of the Mixing and Voice assigned to each Part.

If you want to change the parameter values from the original ones of the selected Song or Pattern, click

(drag and drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/

Multi section and “1” – “16” in the Part section.

To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard.

To make detailed settings of the selected Multi, click the arrow button at the top of the right panel

next to the main window to call up the Detailed Parameter section.

n The MOTIF XF Editor lets you edit the Voice parameters in the Song or Pattern mode as well as Voice mode.

In the Voice mode, you can edit only the selected Voice. In the Song or Pattern mode, on the other hand, you

can edit the parameters of the Voice assigned to each Part as well as the Mixing parameters. The edited

Voice can be stored to the same Voice Bank as a User Voice regardless of the mode used for editing.

An Example of MOTIF XF Editor in Use: Mixing edit in the Song or Pattern mode

MOTIF XF Editor Owner’s Manual

4. Store the edited Voice or a Mixing, as necessary.

4-1 On the MOTIF XF instrument, press the [STORE] button to call up the Mixing Store

window, select the destination, then press the [ENTER] button to store the edited Mixing.

For details, refer to the Owner’s Manual of the MOTIF XF.

n You can store the edited Mixing also by selecting [Store Mixing] under [Edit] in the menu bar. Note that this

operation does not allow you to select the Song as destination and the edited Mixing will be stored to the

currently selected Song.

4-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in

the menu bar to call up the Store window (page 48) then store the Voice via the same

operations as in steps 6-1, 6-2, 6-3 and 6-4.

5. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a file

(extension: *.X3E).

All the settings you made and the Voice data you stored to the User Banks will be saved as a single file

(extension: X3E). When you open this file next time to call up the Auto Sync window, click [Start] to

synchronize the status of the parameter settings between the MOTIF XF Editor and the MOTIF XF

instrument.

• When starting the MOTIF XF Editor from Studio Manager, you can save the MOTIF XF Editor data into a

Document file of Studio Manager.

• When using DAW (digital audio workstation) software compatible with Studio Connections and the

Studio Manager together, the MOTIF XF Editor data can be saved into a project file of the DAW.

MOTIF XF Editor Window: Overall section

MOTIF XF Editor Owner’s Manual

MOTIF XF Editor Window

Overall section

File, Edit, Bulk, Help

Refer to page 37.

Voice/Song/Pattern mode

Determines the mode of the MOTIF XF, Voice, Song or Pattern. As soon as “Voice,” “Song” or “Pattern” is

selected here, the mode of the MOTIF XF instrument changes accordingly and the Auto Sync window

(page 52) opens. After setting parameters as necessary on this window, click [Start] to execute data

synchronization between the MOTIF XF Editor and the MOTIF XF instrument.

ONLINE/OFFLINE

Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is

indicated, the edited status is completely synchronized between the MOTIF XF Editor and the MOTIF XF

instrument, meaning that any parameter edit you make on the MOTIF XF Editor is reflected in the same

parameter on the MOTIF XF instrument and vice versa. When OFFLINE is selected, editing on the MOTIF

XF Editor will not affect the MOTIF XF instrument and vice versa even if the MOTIF XF instrument is

connected to a computer.

Note that the indication here is automatically changed according to the status of communication

between the MOTIF XF Editor and the MOTIF XF instrument. For example, the ONLINE status changes

automatically to OFFLINE when the cable is disconnected accidentally.

Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE ( ) described below.

Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the

MOTIF XF instrument is not properly connected to a computer.

This OFFLINE indication shows that the MIDI Port is set properly and the MOTIF XF is properly connected

to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you can

synchronize the settings between the MOTIF XF Editor and the MOTIF XF by clicking the [Start] button. As

soon as data synchronization is completed, the Auto Sync window is closed and the status of the Editor

changes from OFFLINE to ONLINE.

n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync

window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync

window.

This OFFLINE indication shows that the MIDI Port is not set properly or the MOTIF XF instrument is not

connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to

connect the MOTIF XF instrument to a computer, set the MIDI Port properly then click the [Start] button in

the Auto Sync window to execute data synchronization between the MOTIF XF Editor and the MOTIF XF

instrument. As soon as data synchronization is completed, the Auto Sync window is closed and the status

of the Editor is changed from OFFLINE to ONLINE.

MOTIF XF Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)

MOTIF XF Editor Owner’s Manual

Mixer section (when the Voice/Song/Pattern is set to “Voice”)

Global

This strip lets you edit the main parameters in the Voice mode, such as effect-related ones.

n When editing any of the Global parameters described below, a small square appears at the top right of the

“G” box until you save the edited data as a file. This indication is the same as the [F] indicator (page 26).

Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)

Edits the Master EQ parameters.

Chorus

Selects the Chorus type.

Reverb

Selects the Reverb type.

Master Effect

Turns the Master Effect on or off and selects the Master Effect type.

Volume

Adjust the entire volume.

[Voice]/[AD/FW Part] tab

Selects the Parts to be edited from [Voice] and [AD/FW Part]. The illustration below indicates that the

[Voice] tab is active.

Before editing

After editing

MOTIF XF Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)

MOTIF XF Editor Owner’s Manual

Voice

When the [Voice] is selected:

Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below.

n When editing any of the Voice parameters described below, a small square appears at the top right of the “V”

box until you save the edited data as a file or you store the edited data as a Voice. This indication is the same

as the [V] indicator (page 29).

n The MIDI monitor mark is at the left side of the “V” mark. A small LED lights when the specific MIDI channel

receives MIDI messages.

Category, Bank, No., Voice Name

Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window

appears at the right half section, letting you select a different Voice for editing.

VOICE LIBRARY

Close button

Click this to close this window without applying the changes to the MOTIF XF Editor.

[Category]/[Bank] checkboxes

Click either of these boxes to determine whether the Voices listed here are divided into Category

folders or Bank folders.

[+]/[–] buttons

Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to

close all folders.

Before editing

After editing

MOTIF XF Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)

MOTIF XF Editor Owner’s Manual

Folder (Category or Bank)

Click each folder to open or close it.

Voices

Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When

double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the

Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by

dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-and-

dropping the Voice(s) to a new location.

When the Category checkbox is entered, a checkbox is shown at left of each Voice. If you enter

checkmarks to the checkboxes of your most-used or favorite Voice, you can call up a list of these

Voices on the VOICE LIBRARY by setting the [Favorites] checkbox to on.

n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as

normal on your computer OS.

n By right-clicking on Windows / <control> key + clicking on Mac this section and selecting a menu,

you can use the following functions.

• Opening/closing all the folders

• Determining whether the Voices listed here are divided into Category folders or Bank folders.

• Copying/pasting

• Changing the Voice name

• Deleting all the checkmarks of the Favorites checkboxes at left of the Voices

Search Box

You can search for your desired Voice by inputting a keyword here.

[Favorites] checkbox

By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE

LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the

appropriate checkboxes (appearing only when the [Category] checkbox is entered) at the left of each

Voice.

[OK]/[Cancel] buttons

Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit

without applying the Voice selection.

Refresh

When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the MOTIF XF itself, the

name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the MOTIF

XF. If this happens, click this button to update the Voice names of the VOICE LIBRARY.

EQ Lo, Mi, Hi (Part EQ)

Adjusts the equalizer settings for the current Voice.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using

the graphic knobs.

Volume

Adjusts the volume of the current Voice.

ARP (Arpeggio)

Turns Arpeggio playback on or off for the current Voice.

MOTIF XF Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)

MOTIF XF Editor Owner’s Manual

When the [AD/FW Part] is selected:

This section lets you edit parameters for the AD/FW Part in the Voice mode. Clicking “AD” or “FW” row

turns this section on as illustrated below.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD/FW Part in the

Voice mode by using the graphic knobs.

Volume

Adjusts the Volume for the AD/FW Part.

Output Select

Determines the specific output(s) for the AD/FW Part.

LCD Output jacks Stereo/Mono

L&R OUTPUT L and R Stereo

asL&R ASSIGNABLE OUTPUT L and R Stereo

FW1&2 FW OUTPUT 1 and 2 Stereo (1: L, 2: R)

FW3&4 FW OUTPUT 3 and 4 Stereo (3: L, 4: R)

FW5&6 FW OUTPUT 5 and 6 Stereo (5: L, 6: R)

FW7&8 FW OUTPUT 7 and 8 Stereo (7: L, 8: R)

FW9&10 FW OUTPUT 9 and 10 Stereo (9: L, 10: R)

FW11&12 FW OUTPUT 11 and 12 Stereo (11: L, 12: R)

FW13&14 FW OUTPUT 13 and 14 Stereo (13: L, 14: R)

asL ASSIGNABLE OUTPUT L Mono

asR ASSIGNABLE OUTPUT R Mono

FW1 FW OUTPUT 1 Mono

:: :

FW14 FW OUTPUT 14 Mono

insL (AD Part) Effect L (Voice Part) Mono (for Vocorder effect)

MOTIF XF Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)

MOTIF XF Editor Owner’s Manual

Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)

Global

This strip lets you edit the main parameters in the Song or Pattern mode, such as effect-related ones.

n When editing any of the Global parameters described below, a small square appears at the top right of the

“G” box until you save the edited data as a file. This indication is the same as the [F] indicator (page 29).

Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)

Adjusts the Master EQ setting.

Chorus

Selects the Chorus type.

Reverb

Selects the Reverb type.

Master Effect

Turns the Master Effect on or off and selects the Master Effect type.

Volume

Adjusts the entire volume.

Before editing

After editing

MOTIF XF Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)

MOTIF XF Editor Owner’s Manual

[Part 1-16]/[AD/FW Part] tab

Selects the Parts to be edited from [Part 1-16] and [AD/FW Part]. The illustration below indicates that the

[Part 1-16] tab is selected.

Part

When [Part 1-16] is selected:

This section lets you edit parameters for each Part. Clicking any of 1 – 16 turns the corresponding Part

on. In the example illustration below, Part 1 is active.

n When editing any of the Voice parameters such as Element parameters for each Part, a small square

appears at the top right of the “1” – “16” box until you store the edited Voice as a User Voice or Mixing Voice

or you save the edited data as a file. This indication is the same as the [V] indicator (page 29).

Part (Part number)

Indicates the Part number. Clicking here turns the corresponding Part on.

n In some situations, selecting a Part number on the Editor may not change a Part number on the MOTIF XF

and vice versa, even if the Editor is in the ONLINE status. If you come across such a situation and you want

to match the Part number of the MOTIF XF with the one in the Editor, change the Part number via the panel

controls of the MOTIF XF.

Mute/Solo

Mute

Sets the Mute status for each Part. Clicking “M” here changes the Mute status for all Parts

simultaneously.

Solo

Selects the Solo Part. Only one Part can be soloed at a time.

Category, Bank, No. and Voice Name

Indicates the Category Bank and name of the Voice assigned to each Part. When clicking here, the

VOICE LIBRARY window appears at the right half section, letting you select a different Voice for the

current Part. Using the VOICE LIBRARY is the same here as in the Voice mode; for details, refer to

page 15.

EQ Lo, Mi, Hi (Part EQ)

Adjusts the equalizer settings for each Part.

Ins.FX (Insertion Effect Switch)

Switches the Insertion Effect on or off.

n Insertion Effects can be applied up to eight Parts.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level, and stereo Pan position for each Part by using the

graphic knobs.

Volume

Adjusts the Volume for each Part.

MOTIF XF Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)

MOTIF XF Editor Owner’s Manual

Rcv Channel (Receive Channel)

Determines the MIDI Receive Channel for each Part.

Output Select

Determines the specific output(s) for the individual Part. The following settings are available.

* When a Normal Voice is assigned to the edited Part, this value is indicated as “L&R (dr)” and the sound will be

output via the OUTPUT L and R jacks in stereo. When a Drum Voice is assigned to the edited Part, this value is

indicated as “drum” and the sound will be output via the jacks set in the Drum Key Edit as the Output Select

parameter on the MOTIF XF Editor.

n Depending on the setting of the Quick Setup (page 33), the audio signal of Parts which are set to “L&R” or

“FW1” – “FW14” or “FW1&2” – “FW13&14” will be output via the OUTPUT L/R jack as well as FW.

ARP (Arpeggio)

Turns Arpeggio playback on or off for each Part.

n Up to four Parts can play back the Arpeggio simultaneously.

When [AD/FW Part] is selected:

This section lets you edit parameters for the AD/FW Part in the Song or Pattern mode. Clicking “AD” or

“FW” row turns this section on as illustrated below.

Ins FX (Insertion Effect)

Switches the Insertion Effect on or off (only in the AD Part).

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD/FW Part by using

the knob icons.

Volume

Adjusts the Volume for the AD/FW Part.

Output Select

Determines the specific output(s) for the AD/FW Part. The available settings are the same as those of the

AD/FW Part in the Voice mode. Refer to page 17.

LCD Output jacks Stereo/Mono

L&R OUTPUT L and R Stereo

asL&R ASSIGNABLE OUTPUT L and R Stereo

FW1&2 FW OUTPUT 1 and 2 Stereo (1: L, 2: R)

FW3&4 FW OUTPUT 3 and 4 Stereo (3: L, 4: R)

FW5&6 FW OUTPUT 5 and 6 Stereo (5: L, 6: R)

FW7&8 FW OUTPUT 7 and 8 Stereo (7: L, 8: R)

FW9&10 FW OUTPUT 9 and 10 Stereo (9: L, 10: R)

FW11&12 FW OUTPUT 11 and 12 Stereo (11: L, 12: R)

FW13&14 FW OUTPUT 13 and 14 Stereo (13: L, 14: R)

asL ASSIGNABLE OUTPUT L Mono

asR ASSIGNABLE OUTPUT R Mono

FW1 FW OUTPUT 1 Mono

:: :

FW14 FW OUTPUT 14 Mono

drum See below* See below*

MOTIF XF Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Voice”)

MOTIF XF Editor Owner’s Manual

Parameter Category section (when the Voice/Song/Pattern is set to

“Voice”)

You can edit detailed parameters for the current Part by clicking the button (located near the top right of

the window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed

Parameter section moves the Parameter Category Section rightward as shown below.

Parameter Category section

Parameter Category section Detailed Parameter section

MOTIF XF Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Voice”)

MOTIF XF Editor Owner’s Manual

The indicated categories in the Parameter Category section differs depending on the selected row: G, V, or

AD/FW Part, as illustrated below. Clicking each of Categories calls up the corresponding parameters in the

Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “V”

indication shown below appears by clicking the “V” row appearing only when the [Voice] tab is selected at

the bottom of the Mixer section. The “AD/FW” indication shown below appears by clicking the “AD/FW” row

appearing only when the [AD/FW Part] tab is selected at the bottom of the Mixer section.

Open/Close button

This button opens/closes the Detailed Parameter section. When only the left arrow is indicated in white,

the Detailed Parameter section is hidden and you can call it up by clicking here. When only the right

arrow is indicated in white, the Detailed Parameter section is shown on the display, allowing you to edit

the displayed parameters. The Detailed Parameter section can be closed by clicking this button. You

can also conveniently open and close the Detailed Parameter window from your computer keyboard.

Hold down the <Ctrl> key (Command key for Mac) and simultaneously press the left arrow () key to

open the window, or hold <Ctrl> key (Command key for Mac) and press the right arrow () key to close

it.

Global Settings

This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Global parameters in the Detailed Parameter section.

Voice Common

This is shown when the “V” row is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Voice Common parameters in the Detailed Parameter section.

“G” “V” “AD/FW”

MOTIF XF Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Voice”)

MOTIF XF Editor Owner’s Manual

Element or Drum Key

This is shown when the “V” row is selected in the Mixer section. When a Normal Voice is selected

(“Element” is shown in the Parameter Category section) and you select an Element number (from 1 –

16), then clicking each of the parameter categories calls up the corresponding Element parameters in

the Detailed Parameter section. When a Drum Voice is selected (“Drum Key” is shown in the Parameter

Category section) and you select a key number (from C0 – C6), then clicking each of the parameter

categories calls up the corresponding Drum Key parameters in the Detailed Parameter section.

Checkboxes for Elements (available when the Normal Voice is selected)

Turns each Element on or off.

[1] – [8], [All] buttons (available when the Normal Voice is selected)

Selects the Element to be edited. When [All] is selected, the Element Quick Setting window appears in the

Detailed Parameter section. This window conveniently lets you edit frequently-used Element parameters of

all Elements in a single window.

Element Parameter categories (available when the Normal Voice is selected)

Indicates the categories of Element parameters. Clicking each of the categories calls up the

corresponding Element parameters in the Detailed Parameter section.

Checkbox for the Drum Key (available when the Drum Voice is selected)

Turns the current Drum Key on or off.

Drum Key (available when the Drum Voice is selected)

Indicates the current Drum Key to be edited. You can select the Drum Key to be edited by clicking either of

the triangular buttons below the key indication.

Drum Key Parameter categories (available when the Drum Voice is selected)

Indicates the categories of Drum Key parameters. Clicking each of categories calls up the corresponding

Drum Key parameters in the Detailed Parameter section.

AD/FW

This is shown when the AD/FW Part is selected in the Mixer section. The Detailed Parameter section

shows the Effect-related parameters.

i (Information)

Indicates information about the parameter at the cursor arrow position. To view the information for a

desired parameter, mouse-over the knob, slider or setting for that parameter. You can switch this

Information feature on or off by clicking the “

i” box.

When the Normal Voice is selected: When the Drum Voice is selected:

MOTIF XF Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)

MOTIF XF Editor Owner’s Manual

Parameter Category section (when the Voice/Song/Pattern is set to

“Song” or “Pattern”)

You can edit detailed parameters for the current Part by clicking the button (located near the top right of the

window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed

Parameter section moves the Parameter Category Section rightward as shown below.

Parameter Category section

Parameter Category section Detailed Parameter section

MOTIF XF Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)

MOTIF XF Editor Owner’s Manual

The indicated categories in the Parameter Category section differs depending on the selected Part type: M,

Part 1 – 16, or AD/FW Part. Clicking each of the Categories calls up the corresponding parameters in the

Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “Part 1

– 16” indication shown below appears by clicking any place on the Part row appearing only when the [Part 1-

16] tab is selected at the bottom of the Mixer section. The “AD/FW” indication shown below appears by

clicking the “AD/FW” row appearing only when the [AD/FW Part] tab is selected at the bottom of the Mixer

section.

Open/Close button

Same as in the Voice mode (page 22).

Global Settings

This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Global parameters in the Detailed Parameter section.

Multi Common

This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Common parameters in the Detailed Parameter section.

Part Common

This is shown when one of Parts 1 – 16 is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Common parameters of the Voice/Part in the Detailed Parameter

section.

Element or Drum Key

This is shown when one of Parts 1 – 16 is selected in the Mixer section. When a Normal Voice is

assigned to the current Part (“Element” is shown in the Parameter Category section) and you select an

Element number (from 1 – 16), then clicking each of the parameter categories calls up the

corresponding Element parameters in the Detailed Parameter section. When a Drum Voice is assigned

to the current Part (“Drum Key” is shown in the Parameter Category section) and you select a key

number (from C0 – C6), then clicking each of the parameter categories calls up the corresponding Drum

Key parameters in the Detailed Parameter section.

For details, see the Voice mode (page 23).

AD/FW

Same as in the Voice mode (page 23).

i (Information)

Same as in the Voice mode (page 23).

“G” Part 1 – 16 “AD/FW”

MOTIF XF Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Voice”)

MOTIF XF Editor Owner’s Manual

Detailed Parameter section (when the Voice/Song/Pattern is set to

“Voice”)

This section indicates the detailed parameters of the selected category for the current Voice or Global

settings. This section introduces what parameters belong to each of the Parameter Categories. For details

about each parameter, refer to the Owner’s Manual of the MOTIF XF.

Three Indicators showing the Editing Status

One or more of the following three indicators are shown at the right top of the window when you edit a

parameter.

n These indicators, “V,” “G” and “F” are linked with the small squares at the top right of “1” – “16” boxes and

“G” box in the Mixer section. The “V” and “G” indicators disappear if you execute the Voice Store, Mixing

Store and Global Store operation, respectively. The “F” indicator and the small squares at the top right of the

“G” box in the Mixer section disappear only if you execute the File Save operation. All the indicators and the

small squares disappear if you execute the File Save operation.

Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator

disappears when you execute Voice Store (page 48).

Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global

Store (page 48).

Indicates that the parameter edits are not saved yet as a file.

V, G , F

indicators

MOTIF XF Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Voice”)

MOTIF XF Editor Owner’s Manual

Global Settings

This Parameter category which is called up by selecting the “G” row in the Mixer section consists of the

following sub categories.

Master FX/EQ (Master Effect/EQ)

Clicking this in the Parameter Category section calls up the Master Effect/EQ parameters in the Detailed

Parameter section. On the MOTIF XF instrument, these parameters are the same as those called up by

selecting “Master FX” or “Master EQ” on the UTILITY window.

Controller Assign

Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed

Parameter section. On the MOTIF XF instrument, these parameters are the same as those called up by

selecting “Control” on the UTILITY window.

Micro Tuning

Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed

Parameter section. On the MOTIF XF instrument, these parameters are the same as those called up by

selecting “Tuning” on the UTILITY window.

Voice Common

This Parameter Category is called up by selecting the “V” row in the Mixer section. The parameters

belonging to this category lets you make the settings applied to all the Elements or Drum Keys commonly.

The following sub categories are included.

General

Clicking this in the Parameter Category section calls up the parameters such as Voice name and pitch-

related parameters in the Detailed Parameter section. On the MOTIF XF instrument, these parameters

are the same as those called up by selecting “EG/EQ” on the Voice Play window ([VOICE]  [F3]) and

“Name” and “Play Mode” on the VOICE Edit-Common window.

ARP (Arpeggio)

Clicking this in the Parameter Category section calls up the Arpeggio-related parameters in the Detailed

Parameter section. On the MOTIF XF instrument, these parameters are the same as those called up by

selecting “ARP Main” and “ARP Other” on the VOICE Edit-Common window.

Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which

lets you use the search function for the selecting Arpeggio Types, as with the VOICE LIBRARY window

(page 15).

Controller Set

Clicking this in the Parameter Category section calls up the Controller Set parameters in the Detailed

Parameter section. On the MOTIF XF instrument, these parameters are the same as those called up by

selecting “Control Set” on the VOICE Edit-Common window.

LFO (Low Frequency Oscillator)

Clicking this in the Parameter Category section calls up the LFO-related parameters in the Detailed

Parameter section. On the MOTIF XF instrument, these parameters are the same as those called up by

selecting “Com LFO” on the VOICE Edit-Common window. This Parameter Category is not available for

Drum Voices.

Effect

Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed

Parameter section. On the MOTIF XF instrument, these parameters are the same as those called up by

selecting “Effect” on the VOICE Edit-Common window.

MOTIF XF Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Voice”)

MOTIF XF Editor Owner’s Manual

Element or Drum Key

This Parameter Category is called up by selecting the “V” row in the Mixer section. The “Element” is shown

when the Normal Voice is selected while the “Drum Key” is shown when the Drum Voice is selected. The

parameters belonging to this category lets you make the settings applied to each of the Elements or Drum

Keys individually. The following sub categories are included.

n For information about the checkboxes at left of each Element number 1 – 8 and “All,” refer to page 23. For information

about the Drum Key (note name) and checkbox, refer to page 23.

Oscillator/Pitch

Clicking this in the Parameter Category section calls up the parameters related to the Oscillator and

Pitch in the Detailed Parameter section.

Filter

Clicking this in the Parameter Category section calls up the Filter-related parameters in the Detailed

Parameter section.

Amplitude

Clicking this in the Parameter Category section calls up the Amplitude-related parameters in the

Detailed Parameter section.

LFO/EQ (Low Frequency Oscillator/Equalizer)

Clicking this in the Parameter Category section calls up the parameters related to the LFO and EQ in the

Detailed Parameter section.

AD/FW

This Parameter Category is called up by selecting the “AD/FW” row in the Mixer section. The parameters

belonging to this category lets you make the settings applied to the AD/FW Part in the Voice mode. The

following sub category is included.

Effect

Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to

the AD/FW Part of the Voice mode in the Detailed Parameter section.

MOTIF XF Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)

MOTIF XF Editor Owner’s Manual

Detailed Parameter section (when the Voice/Song/Pattern is set to

“Song” or “Pattern”)

This section indicates the detailed parameters of the selected category for the current Part and the Voice

assigned to the current Part, or the Global settings. This section introduces what parameters belong to each

of the Parameter Categories. For details about each parameters, refer to the Owner’s Manual of the MOTIF

XF.

Four Indicators showing the Editing Status

One or more of the following four indicators are shown at the right top of the window when you edit a

parameter.

n These indicators, “V,” “M,” “G” and “F” are linked with the small squares at the top right of “1” – “16” boxes and “G” box

in the Mixer section. The “V,” “M” and “G” indicators disappear if you execute the Voice Store, Mixing Store and Global

Store operations, respectively. The “F” indicator and the small squares at the top right of the “G” box in the Mixer section

disappear only if you execute the File Save operation. All the indicators and the small squares disappear if you execute

the File Save operation.

Global Settings

This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following

sub categories.

Controller Assign

Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed

Parameter section. On the MOTIF XF instrument, these parameters are the same as those called up by

selecting “Ctrl Asgn” on the SONG or PATTERN Edit-Common window.

Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator

disappears when you execute Voice Store (page 48).

Indicates that the Multi edits are not stored yet. This indicator disappears when you execute Mixing

Store (page 49).

Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global

Store (page 48).

Indicates that the parameter edits are not saved yet as a file.

V, M, G, F

indicators

MOTIF XF Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)

MOTIF XF Editor Owner’s Manual

Micro Tuning

Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed

Parameter section. On the MOTIF XF instrument, these parameters are the same as those called up by

selecting “Tuning” on the UTILITY window.

Multi Common

This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following

sub categories.

Effect

Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed

Parameter section. On the MOTIF XF instrument, these parameters are the same as those called up by

selecting “Reverb” and “Chorus” on the SONG or PATTERN Edit-Common window.

Master FX/EQ (Master Effect/EQ)

Clicking this in the Parameter Category section calls up the parameters related to the Master Effect and

EQ in the Detailed Parameter section. On the MOTIF XF instrument, the Master EQ parameters are the

same as those called up by selecting “Master FX”/”Master EQ” on the SONG or PATTERN Edit-Common

window.

Part Common

This Parameter category which is called up by selecting any of the “1” – “16” rows in the Mixer section

consists of the following sub categories.

General

Clicking this calls up the GENERAL window in the Parameter Category section. This window lets you edit

the Voice Common parameters such as naming and the Mixing Part parameters such as Pitch,

Portamento, Note/Velocity Limit and Part EQ. In the Part Common General section, both the Mixing Part

parameters (the “M” indicator appears at the top right during editing) and Voice Common parameters

(the “V” indicator appears at the top right during editing) can be edited. To distinguish between them, a

small dot is shown at the immediate left of the parameters.

ARP (Arpeggio)

Clicking this in the Parameter Category section calls up the parameters related to the Arpeggio

assigned to the current Part in the Detailed Parameter section. On the MOTIF XF instrument, these

parameters are the same as those called up by selecting “ARP Main” and “ARP Other” on the SONG or

PATTERN Edit-Part window.

Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which

lets you use the search function for the selecting Types, as with the VOICE LIBRARY window (page 15).

RCV/Control Set (Receive/Control Set)

Clicking this calls up the RCV/CONTROLLER SET ASSIGN window in the Parameter Category section.

This window lets you edit the Receive Switch parameters for the current Part and the Controller Set

Assign parameters for the current Part and the Voice. On the MOTIF XF instrument, these parameters

are the same as those called up by selecting “RcvSwitch” on the SONG or PATTERN Edit-Part window.

LFO (Low Frequency Oscillator)

Clicking this in the Parameter Category section calls up the LFO-related parameters of the Voice

assigned to the current Part in the Detailed Parameter section. This Parameter Category is not available

if the Drum Voice is assigned to the current Part.

Effect

Clicking this in the Parameter Category section calls up the parameters related to the Insertion Effect for

the current Part and System Effect applied to all the Parts in the Detailed Parameter section.

MOTIF XF Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)

MOTIF XF Editor Owner’s Manual

Element or Drum Key

This Parameter Category is called up by selecting any of the “1” – “16” rows in the Mixer section. The

“Element” indication appears when the Normal Voice is assigned to the current Part while the “Drum Key” is

shown when the Drum Voice is assigned. The parameters belonging to this category lets you make the

settings applied to each of the Elements or Drum Keys individually. For details, see the Voice mode section.

AD/FW

This Parameter Category is called up by selecting the “AD/FW” row in the Mixer section. The parameters

belonging to this category lets you make the settings applied to the AD/FW Part in the Song or Pattern mode.

The following sub category is included.

Effect

Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to

the AD/FW Part of the Song or Pattern mode in the Detailed Parameter section.

MOTIF XF Editor Window: Bottom section

MOTIF XF Editor Owner’s Manual

Bottom section

Controller Set status

This section indicates which controller on the MOTIF XF instrument is used as the Control Source of the

Controller Set edited in the RCV/CONTROLLER SET ASSIGN window.

Part

Indicates the current Part.

Control Source (Controller)

Indicates the six controllers as source of the Controller Set. The abbreviations for the Controllers are as

follows:

On/Off status

When a lamp is turned on, a certain function (Destination) is assigned to the corresponding Source

(controller). When a lamp is turned off, no function (Destination) is assigned to the corresponding Source

(controller).

Indication Control Source Indication Control Source

PB Pitch Bend Wheel BC Breath Controller

MW Modulation Wheel AS1 ASSIGN 1 knob

AT After Touch (keyboard) AS2 ASSIGN 2 knob

FC Foot Controller FC2 Foot Controller 2

FS Foot Switch AF1 ASSIGNABLE FUNCTION 1 button

RB Ribbon Controller AF2 ASSIGNABLE FUNCTION 2 button

MOTIF XF Editor Window: Bottom section

MOTIF XF Editor Owner’s Manual

Quick Setup

From this section, you can instantly call up appropriate panel settings for the Song or Pattern mode of

the MOTIF XF instrument by clicking a convenient preset setup.

n The settings of the MOTIF XF instrument made via the operation here cannot be saved as an Editor file.

MIDI

The following setups are equivalent to those in Quick Setup in the Utility mode of the MOTIF XF.

Internal

This setup is useful when you use the sequencer function (Song or Pattern) on the MOTIF XF instrument

alone (without a computer).

SEQ to PC

This setup is useful when you transmit the Song or Pattern playback data to a connected computer and

record it to the DAW on the computer.

REC on PC

This setup is useful when you record your keyboard performance on the MOTIF XF to the DAW on the

connected computer.

ARP to PC

This setup is useful when you transmit the Arpeggio playback data on the MOTIF XF instrument to a

connected computer and record it to the DAW on the computer.

FW Monitor

The following setups are equivalent to the FW Monitor Setup in the Utility mode of the MOTIF XF.

St-Alone (stand alone)

This should be selected when you are using the MOTIF XF alone or are not using the DAW even with a

computer connected to the MOTIF XF via an IEEE1394 cable. When this is selected, the audio signal of the

MOTIF XF (only Parts which are set to “L&R” as the Output Select parameter) will be output directly via the

OUTPUT L/MONO and R jacks normally.

With PC

This should be selected when you are using the MOTIF XF as an audio device with the DAW. When this is

selected, the audio signal of the MOTIF XF (only Parts which are set to “L&R” as the Output Select

parameter) will be output to the DAW on a computer via an IEEE1394 cable, merged and mixed with the

DAW sound, returned back to the MOTIF XF, then output via the OUTPUT L/MONO and R jacks. Selecting

this allows you to apply Effects within the DAW to the MOTIF XF sound.

PC Drct (Direct Monitor)

This should be selected when recording your keyboard performance on the MOTIF XF instrument to the

DAW on the computer. The audio signal of the MOTIF XF (only Parts which are set to “FW1” –“FW14” or

“FW1&2” – “13&14” as the Output Select parameter) will be sent to DAW, while the audio signal also will be

output directly via the OUTPUT L/MONO and R jacks to monitor the sound without latency. The audio

signal from the DAW will be output via an IEEE1394 cable. Keep in mind that the Rec Monitor of the DAW

should be set to “off” in order to prevent “double” sound from occurring.

n MOTIF XF keeps the settings of the FW Monitor function after you’ve closed the MOTIF XF Editor. MOTIF XF

does not output sound to OUTPUT L/MONO, R even after you’ve closed the editor, or disconnected from the

computer with the “With PC” setting. Make sure to confirm the setting on the MOTIF XF itself after using the

editor in stand-alone mode.

MOTIF XF Editor Window: Bottom section

MOTIF XF Editor Owner’s Manual

Quick Edit Knobs

This section lets you adjusts various parameters assigned to the Knobs on the front panel of the MOTIF

XF instrument.

[TONE 1]/[TONE 2]/[ARP]

Selects the set of functions assigned to the eight knobs. The functions shown above each of the knobs are

same as those printed on the front panel of the MOTIF XF.

Knobs 1 – 8

You can click each of the eight knobs to adjust the value of the assigned function.

ARP (Arpeggio)

Allows you to change the Arpeggio related setup (on/off status and selecting 1 – 5).

MIDI monitor

Turns the MIDI monitor function on or off. By turning this MIDI jack icon on, the note on/off

messages transmitted to the MOTIF XF will be shown on the virtual keyboard at the bottom of the

Editor window. Turn the MIDI monitor on if you want to confirm the edit result by playing the

MOTIF XF or the MIDI keyboard connected to the computer.

[A.Func] (Assignable Function) button

This button is related to “All AF off,” “AF1 on” and “AF2 on” selected as a value of the XA Control

parameter on the OSCILLATOR/PITCH window of the Normal Voice Element Edit. For details, refer to the

Owner’s Manual of the MOTIF XF.

Keyboard

Allows you to audition the edited sound. Note on/off messages corresponding to the keys you click or

drag will be transmitted to the external device via the MIDI port specified in the Editor Setup window

(page 40) as the MIDI OUT parameter.

n The velocity when clicking a key is determined by the setting of the Keyboard Velocity parameter (page 42)

in the Setup window.

n When a Drum Voice is edited, you can initialize the parameter settings of each key by right-clicking

(Windows) / <control> key + clicking (Mac) on the virtual keyboard. From the menu called up by right-

clicking (Windows) / <control> key + clicking (Mac), selecting “Initialize key” will initialize all the parameter

settings except for the waveform assignment of the currently selected drum key, while selecting “Initialize key

(with Wave)” will initialize the all the parameter settings including the waveform assignment.

Basic Operations

MOTIF XF Editor Owner’s Manual

Basic Operations

This section covers basic operations of the MOTIF XF Editor.

Naming a Voice

You can assign an original name of your choice to the edited Voice on the VOICE LIBRARY window,

GENERAL window in the Part Common General, and the Store window.

From the VOICE LIBRARY window (page 15), select a User Voice or Mixing Voice then click the selected

Voice so that you can edit the name. After editing the Voice name, pressing the <Enter> key or locating the

cursor to another parameter finalizes the edited name while pressing the <Esc> key aborts it.

From the GENERAL window (below) and Store window (page 48), locate the cursor in the text box of “Voice

Name” at the top of this window, then edit the name in the text box as desired. After editing, pressing the

<Enter> key or locating the cursor to another parameter finalizes the edited name.

Searching for a Voice/Arpeggio Type

You can search for the desired Voice and Arpeggio type on the VOICE LIBRARY window (page 15) and ARP

LIBRARY window just by inputting a keyword in the text box at the bottom of these windows respectively.

Likewise, the Search function is available on the Import window (page 38).

Inputting a numerical value

When double clicking a value box such as that shown above, the value box can be edited and you can input

a numerical value directly by using numeric keys. After editing, pressing the <Enter> key or locating the

cursor to another parameter finalizes the value while pressing the <Esc> key aborts it. You can edit the value

also by using the Cursor key or <Page Up>/<Page Down> key after clicking this box.

In Windows, to reset the value to its default, simultaneously hold down the <Ctrl> key and click on the value

box. On the Mac, to reset the value to its default, simultaneously hold down the Command key and click on

the value box.

n For certain parameters, the value can be edited only by using the mouse and cannot be input directly by using the

numeric keys.

Basic Operations

MOTIF XF Editor Owner’s Manual

Selecting a value

Clicking inside the value box like such as that shown above calls up the list box, from which you can select

the desired value. You can also select the value also by clicking the arrow at right end of this box.

Using a knob

Dragging or clicking the knob such as that shown above changes the value of the corresponding parameter.

After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you

want to make fine adjustments to the value, drag the mouse while holding the <Shift> key.

The specific operation of the knob is determined by the settings of the Knob Guide parameter and Knob

Mouse Control parameter in the Setup window (page 40). In Windows, to reset the value to its default,

simultaneously hold down the <Ctrl> key and click on the knob. On the Mac, to reset the value to its default,

simultaneously hold down the Command key and click on the knob.

Using a slider

Dragging or clicking the slider such as that shown above changes the value of the corresponding parameter.

After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you

want to make fine adjustments to the value, drag the mouse while holding the <Shift> key.

The specific operation of the slider is determined by the setting of the Slider Mouse Control parameter in the

Setup window (page 40). In Windows, to reset the value to its default, simultaneously hold down the <Ctrl>

key and click on the slider. On the Mac, to reset the value to its default, simultaneously hold down the

Command key and click on the slider.

Using a graph

Dragging one of the boxes in the graph (as shown above) changes the value of the corresponding parameter.

In Windows, simultaneously hold down the <Ctrl> key and click on the box to reset the corresponding value

to the default setting. To reset the entire graph and its values to the default setting, simultaneously hold down

the <Ctrl> key and click on any section in the graph (other than one of the boxes) to reset the entire graph

and its values to the default setting. On the Mac, simultaneously hold down the Command key and click on

the box to reset the corresponding value to the default setting. To reset the entire graph and its values to the

default setting, simultaneously hold down the Command key and click on any section in the graph (other

than one of the boxes) to reset the entire graph and its values to the default setting.

Menu: [File] menu

MOTIF XF Editor Owner’s Manual

[File] menu

New

Creates and opens a new file containing the default Mixing setup and Voice data.

Open...

Opens an already saved file of the MOTIF XF Editor. The following file types can be selected and opened.

• MOTIF XF Editor Files (.X3E)

• MOTIF XF All Files (.X3A)

• MOTIF XS Editor Files (.X0E)

• MOTIF XS All Files (.X0A)

• MOTIF-RACK XS Editor Files (.X1E)

• MO6/MO8 Multi Part Editor Files (.M4E)

• MOTIF ES6/7/8 Multi Part Editor Files (.M4E)

• MOTIF-RACK ES Multi Part Editor Files (.M3E)

NOTICE

Unlike files of other applications such as word processors, only a single file can be opened and edited on the MOTIF XF Editor.

Before opening a new file, make sure to save the edited settings as a file to avoid losing data.

Save

Saves the current settings by overwriting the current file.

Save As...

Saves the current settings as a MOTIF XF Editor file (.X3E) under a new or different name.

Menu: [File] menu

MOTIF XF Editor Owner’s Manual

Import

Imports the Voice data (a specific Voice in a specific folder or all Voices in a specific folder) from a different

file to the current file.

Click the File Select button ( ), select a file including your desired Voice(s) so that the folders in the selected

file are listed as the Source Voice list ( ), select a Voice or Voices or a folder or folders in the list ( ), select

a destination location in the Destination Voice list ( ) of the current file, then click [Import] ( ) to execute the

Import operation.

The following file types can be selected.

• MOTIF XF Editor Files (.X3E)

• MOTIF XF All Files (.X3A)

• MOTIF XF All Voice Files (.X3V)

• MOTIF XS Editor Files (.X0E)

• MOTIF-RACK XS Editor Files (.X1E)

• MO6/MO8 Voice Editor and MOTIF ES6/7/8 Voice Editor Files (.W7E)

• MO6/MO8 Multi Part Editor Files (.M4E)

• MOTIF-RACK ES Multi Part Editor Files (.M3E)

• MOTIF ES6/7/8 Multi Part Editor Files (.M4E?.M2E)

• MOTIF-RACK ES Voice Editor Files (.W9E)

• MOTIF XS ALL Files (.X0A)

• MOTIF XS ALL Voice Files (.X0V)

• S90 XS/S70 XS Editor Files (.X2E)

• S90 XS/S70 XS All (.X2A)

• S90 XS/S70 XS All Voice (.X2V)

[X] (Close) button

Click this to close this window without importing.

File name (Indication only)

Indicates the currently selected file.

File selection button

Click this to open the dialog for file selection.

[Category]/[Bank] checkboxes

Click either of these boxes to determine whether the Voices in the Source Voice list ( ) are divided into

Categories or Banks.

Menu: [File] menu

MOTIF XF Editor Owner’s Manual

[Import] button

Click this to actually import the Voice(s) selected in the Source Voice list ( ) to the specified location in

the Destination Voice list ( ).

n You can also import Voice data without the use of this button by dragging the desired Voice or folder from the

Source Voice list then dropping it to the Destination Voice list.

n A Normal Voice cannot be imported to the User Drum Voice Bank. Likewise, a Drum Voice cannot be

imported to the User Normal Voice Bank. No Voices can be imported to the Preset Voice Bank.

[+]/[–] buttons

Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to

close all folders.

Folder button (Bank or Category)

Double click here to open or close the folder.

Source Voice list

Indicates the Voices or folders of the selected file to be imported.

By right-clicking (Windows) / <control> key + clicking (Mac) this section and selecting a menu, you can

perform the following functions.

• Opening/Closing all the folders

• Determining whether the Voices listed here are divided into Category folders or Bank folders

Destination Voice list

Indicates the Voices or folders currently edited on the MOTIF XF Editor.

n By right-clicking (Windows) / <control> key + clicking (Mac) this section and selecting a menu, you can open

or close all the folders.

Search box

You can search for your desired Voice from the Source Voice list ( ) by inputting a keyword here.

Menu: [File] menu

MOTIF XF Editor Owner’s Manual

Setup

Determines the basic setup of the MOTIF XF Editor. After setting necessary parameters, click [OK] to

actually apply the settings to the MOTIF XF Editor.

[X] (Close) button

Click this to close this window without applying the settings. This button is the same as the [Cancel]

button ( ).

[FW/1394]/[USB] checkboxes

Select which port (USB or FW) is used for communication between the MOTIF XF and computer.

[Detail] button

When “USB” is selected at the [FW/1394]/[USB] checkboxes ( ), you can make detailed settings for the

Input Port and Output Port by setting this button to “On.” This setting is necessary if the Port name is

changed on a computer.

MIDI

Set the MIDI Port for communication between the MOTIF XF Editor and the MOTIF XF instrument. When

“USB” is selected at the [FW/1394]/[USB] checkboxes ( ) and the [Detail] button ( ) is set to “Off,”

select a value such as “Yamaha USB 0” or “MOTIF XF6 (MOTIF XF7, MOTIF XF8)” at the top left column.

When “USB” is selected and the [Detail] button ( ) is set to “On,” select Port 1 and Port 4 both the

MOTIF XF MIDI In and MIDI Out settings. When “FW/1394” is selected at the [FW/1394]/[USB]

checkboxes ( ), select the MIDI Port of the MOTIF XF at the MIDI column and select the model name

such as “MOTIF XF” at the FW Device column.

n When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0”), this indicates that the previously used

Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the host application.

n When the MOTIF XF is connected to a computer via an IEEE1394 cable and the FW/1394 setting above is

turned on, the MIDI Port can handle only note on/off messages. The FW Device setting is necessary for

transferring MIDI messages other than note on/off.

n Keep in mind that setup on the host application (Studio Manager) is necessary before making settings here.

When starting Studio Manager as a stand-alone application, see page 5. When starting Studio Manager as a

plug-in of the DAW application, refer to the manual of the DAW application.

n Make sure to set the MIDI IN/OUT parameter to “USB” in the MIDI display of the Utility mode on the MOTIF XF

instrument when “USB” is selected at the [FW/1394]/[USB] checkboxes. Likewise, make sure to set the MIDI

IN/OUT parameter to “FW” in the Utility mode when “FW/1394” is selected.

Menu: [File] menu

MOTIF XF Editor Owner’s Manual

Device No.

Set the Device number to the same as the value specified in the MIDI display of the Utility mode on the

MOTIF XF itself. When the Device number on the MOTIF XF is set to “All,” set the Device No. here to “1.”

Auto Sync Setting

This section lets you set how the data synchronization between the MOTIF XF Editor and the MOTIF XF

instrument is executed when “OFFLINE” is changed to “ONLINE.” Actual data synchronization is

executed from the Auto Sync window (page 52) called up automatically under certain circumstances

such as clicking the [OFFLINE] button, starting the MOTIF XF Editor and opening a new file on the Editor.

Global

Determines whether or not the Global data (see page 4) is synchronized and which data (MOTIF XF

Editor or MOTIF XF itself) is synchronized with the other.

Current

Determines whether or not the Current data (see page 4) is synchronized and which data (MOTIF XF

Editor or MOTIF XF itself) is synchronized with the other.

Voice

Determines whether or not the Voice data (see page 4) is synchronized and which data (MOTIF XF

Editor or MOTIF XF itself) is synchronized with the other.

Auto Start

When this is set to “On” and one of the following operations is executed, data synchronization will be

started automatically as soon as the Auto Sync window is opened.

• When clicking “OFFLINE” after setting the MIDI IN/OUT parameter correctly in the Utility mode on the MOTIF

XF, setting the MIDI Ports correctly on the computer, and making a proper connection.

• When the connection between the MOTIF XF and a computer are corrected after appropriately correcting

the setup of the MOTIF XF and the computer.

• When the settings on the MOTIF XF instrument and the computer are corrected after appropriately

reconnecting the devices.

• When the settings on the MOTIF XF instrument and the computer are corrected after appropriately

launching the MOTIF XF Editor.

n The parameters set here apply also to the parameters having the same names in the Auto Sync window.

NOTICE

When the Auto Start parameter is set to “On,” data synchronization is started automatically under certain

circumstances (page 52) such as clicking the [OFFLINE] button, starting the Editor and opening a new file on the

Editor. Keep in mind that this will cause unexpected data loss on the MOTIF XF Editor or the MOTIF XF itself, since

new data automatically overwrites old data upon data synchronization. Make sure to save your important data before

using the MOTIF XF Editor.

Knob Guide

Determines whether or not the Knob Guide (knob editing area) appears when adjusting a knob. Setting

this to On conveniently enlarges the knob editing area (as shown), making it much easier to edit a knob’s

parameter.

Knob Guide: On Knob Guide: Off

Menu: [File] menu

MOTIF XF Editor Owner’s Manual

Knob Mouse Control

Determines how the knob illustrated at right responds to

your mouse control.

Circular

When this is selected, you can jump to a specific value by clicking at a point within the Knob editing

area. You can edit the value also by dragging the mouse in a circular direction—in much the same way

as turning an actual knob.

Relative Circular

When this is selected, you can edit the value by dragging the mouse in a circular direction—in much the

same way as turning an actual knob.

Linear

When this is selected, you can edit the value by dragging any point in the knob editing area (the mouse

pointer disappears) and moving it vertically or horizontally—in much the same way as operating a slider.

Slider Mouse Control

Determines how the Slider illustrated at right responds to

your mouse control.

Jump

When this is selected, clicking any location in the slider jumps the slider pointer to that location.

Touch

When this is selected, you can edit the value by dragging and moving the slider pointer horizontally—in

much the same way as operating an actual slider. Clicking at any location in the slider (other than the

orange pointers) does not affect the slider.

Ramp

When this is selected, clicking at any location in the slider (other than the orange pointers) moves the

nearest pointer to that location. Dragging any point in the slider moves the slider pointer accordingly.

Relative

When this is selected, you can edit the value by dragging any point (the mouse pointer disappears) and

moving it horizontally.

Keyboard Velocity

Determines the Velocity value generated when clicking any note on the virtual keyboard at the bottom of

the Editor window. When “Fix” is turned on, clicking any key generates the same velocity value which

can be specified in the box at right of “Fix.” When “Free” is turned on, the generated Velocity value

differs depending on the click location. The lower on the key graphic you click, the higher the Velocity.

Menu: [File] menu

MOTIF XF Editor Owner’s Manual

Inc/Dec Action

Determines how the triangular buttons ([]/[]/[ ]/[ ]) located at the parameter boxes as illustrated

below work.

Inc/Inc:

When this is selected, clicking the [] button increases the value by 1 while clicking the [L] button

moves the cursor downward by one item.

Inc/Dec:

When this is selected, clicking the [] button increases the value by 1 while clicking the [L] button

moves the cursor upward by one item.

Dec/Inc:

When this is selected, clicking the [] button decreases the value by 1 while clicking the [L] button

moves the cursor downward by one item.

Dec/Dec:

When this is selected, clicking the [] button decreases the value by 1 while clicking the [L] button

moves the cursor upward by one item.

Startup Mode

This section lets you set the startup mode when launching the MOTIF XF Editor.

Voice

The editor will start in the Voice mode.

Pattern

The editor will start in the Pattern mode.

Song

The editor will start in the Song mode.

[OK] button

Click this to actually apply the settings to the MOTIF XF Editor and close the Setup window.

[Cancel] button

Click this to close the Setup window without applying the settings to the MOTIF XF Editor.

Menu: [File] menu

MOTIF XF Editor Owner’s Manual

Hardware Utility

From the HARDWARE UTILITY window called up by selecting this menu, you can make the settings related

to the parameters in the Utility mode of the MOTIF XF. Editing the parameter on this window will affect the

parameter having the same name of the MOTIF XF instrument. After making the settings, click [Store] at the

bottom of this window to store the settings as Global data.

MOTIF XF Editor

(parameters on the above window)

MOTIF XF instrument

Tone Note Shift [UTILITY]  [F1] General  [SF1] Play

Tune [UTILITY]  [F1] General  [SF1] Play

Auto Load Setup Power On Mode [UTILITY]  [F1] General  [SF4] AutoLoad

MIDI Channel Basic Receive Ch [UTILITY]  [F5] Control  [SF2] MIDI

Basic Transmit Ch [UTILITY]  [F5] Control  [SF2] MIDI

MIDI Sync MIDI Sync [UTILITY]  [F5] Control  [SF2] MIDI

Clock Out [UTILITY]  [F5] Control  [SF2] MIDI

MIDI Switch Bank Select [UTILITY]  [F5] Control  [SF2] MIDI

Program Change [UTILITY]  [F5] Control  [SF2] MIDI

Local Control [UTILITY]  [F5] Control  [SF2] MIDI

MIDI Other Controller Reset [UTILITY]  [F5] Control  [SF2] MIDI

Menu: [Edit] menu

MOTIF XF Editor Owner’s Manual

[Edit] menu

Undo

Cancels the changes you made in your most recent editing. [Undo] menu cannot be selected depending on

the most recent edited parameter.

Redo

Redo is available only after using Undo, and lets you restore the changes you made before undoing them.

Copy

Copies the selected items such as characters of the Voice name in the text box, Voice(s) in the VOICE

LIBRARY window and entire Part setup to the clipboard.

Paste

Pastes the Voice(s), entire Part setup, and characters from the clipboard to the specified location.

Initialize Current Voice (in the Voice mode)/Initialize Current Part Voice (in the Song

or Pattern mode)

In the Voice mode, select [Initialize Current Voice] under [Edit] to call up the Initialize Current Voice window

from which you can initialize the current Voice by clicking [Start]. In the Song or Pattern mode, select

[Initialize Current Part Voice] under [Edit] to call up the Initialize Current Part Voice window from which you

can initialize the Voice assigned to the current Part by clicking [Start].

When a Normal Voice is edited:

Voice mode Song or Pattern mode

Menu: [Edit] menu

MOTIF XF Editor Owner’s Manual

When a Drum Voice is edited:

[X] (Close) button

Click this to close the window without executing Initialization.

[All]/[Clear] button

Clicking [All] turns all the checkboxes in this window on while clicking [Clear] turns them off.

[Common] checkbox

When this is turned on, clicking [Start] initializes the settings of all the Common parameters (Voice

Common parameters when the Editor is set to the Voice mode or Part Common parameters when the

Editor is set to the Song or Pattern mode).

with Wave Assignment

When this is turned on, clicking [Start] initializes the Waveform assignment for all Elements of the current

Voice.

Element [1] – [8] or Drum Key C0 – C6 checkboxes

When a Normal Voice is edited, clicking [Start] initializes the settings of all parameters for the Elements

which are turned on here. When a Drum Voice is edited, clicking [Start] initializes the settings of all

parameters for the drum keys which are turned on here.

[Start] button

After the setup is completed, click [Start] to initialize the parameter settings and close the window.

Menu: [Edit] menu

MOTIF XF Editor Owner’s Manual

Initialize Current Mixing (only in the Song or Pattern mode)

Select this menu to call up the Initialize Current Part Voice window, set the parameters as necessary, then

click [Start] to initialize the Voice data assigned to the current Part.

[X] (Close) button

Click this to close the window without executing Initialization.

[All]/[Clear] button

Clicking [All] turns all the check boxes in this window on while clicking [Clear] turns them off.

[Multi Common] checkbox

When this is turned on, clicking [Start] initializes the settings of all the Multi Common parameters.

Initialize Template

The following templates for initializing are available.

Normal:

When this is selected, clicking [Start] initializes the Editor setup to the normal default settings.

GM:

When this is selected, clicking [Start] initializes the Editor Setup so that the MOTIF XF can be used as a

GM tone generator.

Contemporary R&B – TurkishPop:

When one of these templates is selected, clicking [Start] initializes the Editor Setup so that the MOTIF XF

can be used as a tone generator which matches the name of the selected template.

Output Template

Sets the Output jack for audio signal of all the Parts to “L&R” or “FW.”

Part [1] – [16] checkboxes

Clicking [Start] initializes the settings of all parameters for the Parts which are turned on here.

[AD]/[FW] checkbox

When this is turned on, clicking [Start] initializes the settings of all parameters for the AD/FW Part.

[Start] button

After setup is completed, click [Start] to initialize the Mixing setup and close the window.

Menu: [Edit] menu

MOTIF XF Editor Owner’s Manual

Store Global

Simply selecting this menu will store the Global settings. The Global settings will be stored only to the internal

memory of the MOTIF XF instrument.

Store Voice

From the window selected via this menu, you can store the edited Voice. The current Voice is stored in the

Voice mode while the Voice assigned to the current Part is stored in the Song or Pattern mode. Select the

desired Bank folder ( ), select the number of the destination Voice ( ), input the Voice name ( ), then click

the [Store] button to store the Voice as a User Voice or Mixing Voice (available only in the Song or Pattern

mode).

[X] (Close) button

Click this to close this window without executing the Store operation.

Voice Name

Enter an original name for the Voice to be stored.

[Store] button

Click this to store the edited Voice to the specified Bank and number.

NOTICE

Like other parameters, the Voice data is synchronized with the MOTIF XF instrument when ONLINE (page 13) is

indicated. This means that clicking [Store] in this window stores the edited Voice to the corresponding Bank in the

internal memory of the MOTIF XF instrument. Be careful not to overwrite any important data.

[+]/[–] buttons

Pressing the [+] button opens all the Bank folders, while pressing the [–] button closes them.

Menu: [Edit] menu

MOTIF XF Editor Owner’s Manual

Bank folder

This section indicates the following Banks to which you can store the edited Voice.

• Normal User 1

• Normal User 2

• Normal User 3

• Normal User 4

• Drum User

• Mixing

Clicking on each Bank folder opens it and all the Voices stored in the Bank appear as illustrated above

(from the left illustration to the right one). When clicking the Bank folder again, it closes as illustrated

above (from the right illustration to the left one).

Note that the indicated Bank differs depending on the current mode and current Voice type. The Mixing

Bank is shown only in the Song or Pattern mode. The Drum User Bank is shown only when the Drum

Voice is selected (in the Voice mode) or the Drum Voice is assigned to the current Part (in the Song or

Pattern mode). Likewise, the Normal User Bank and Mixing Bank are shown only when the Normal Voice

is selected (in the Voice mode) or the Normal Voice is assigned to the current Part (in the Song or Pattern

mode).

Voices

The Voices in the selected Bank are listed. Before clicking the [Store] button, you need to select the

number of the destination Voice here. Right-clicking (Windows) / <control> key + clicking (Mac) on this

section calls up the menus “All Open” and “All Close,” letting you open or close all the Bank folders.

Store Mixing (only in the Song or Pattern mode)

Simply selecting this menu will store the Mixing settings in the Song or Pattern mode. The Mixing settings will

be stored to the internal memory (overwritten to the Mixing setup of the currently selected Song or Pattern) of

the MOTIF XF instrument.

Voice Compare

This menu lets you switch between the just-edited Voice and its original, unedited condition, allowing you to

hear how your edits affect the sound. Select “Voice Compare” to enter the Voice Compare mode. In this

mode, you can hear the sound of the original Voice and none of the parameters in the window can be edited.

Select “Voice Compare” again to return to the original status.

n The status of the MOTIF XF instrument is maintained even if you enable the Voice Compare mode on the MOTIF XF

Editor.

Mixing Compare (only in the Song or Pattern mode)

This menu lets you switch between the just-edited Mixing and its original, unedited condition, allowing you to

hear how your edits affect the sound. Select “Mixing Compare” to enter the Mixing Compare mode. In this

mode, you can hear the sound of the original Mixing setup and none of the parameters in the window can be

edited. Select “Mixing Compare” again to return to the original status.

n The status of the MOTIF XF instrument is maintained even if you enable the Mixing Compare mode on the MOTIF XF

Editor.

Menu: [Bulk] menu

MOTIF XF Editor Owner’s Manual

[Bulk] menu

Data Sync

Select this menu to call up the Initialize Data Sync window, set the parameters as necessary, then click

[Start] to transmit the specified data from/to the MOTIF XF Editor to/from the MOTIF XF instrument.

[X] (Close) button

Click this to close this window without executing Data Sync.

[Transmit]/[Receive] checkboxes

Determines whether the MOTIF XF Editor transmits data to the MOTIF XF or receives data from the

MOTIF XF.

[Transmit] checkbox:

When this is checked, clicking [Start] button transmits data from the Editor to the instrument.

[Receive] checkbox:

When this is checked, clicking [Start] button transmits data from the instrument to the Editor.

Data type to be transmitted/received

Here, you can set which data type is to be transmitted or received. Clicking the [All] button turns all the

data types on while clicking the [Clear] button turns all the data types off.

Current

Turn this on then click the [Start] button to transmit or receive the Current settings.

Global

Turn this on then click the [Start] button to transmit or receive the Global settings.

Preset (Favorites)

Turn this on then click the [Start] button to transmit or receive the Favorites-related settings of the Preset

Voice(s).

Normal User 1 – 4

Turn this on then click the [Start] button to transmit or receive the data of the Normal User Voice Bank 1,

2, 3, and 4 respectively.

Drum User

Turn this on then click the [Start] button to transmit or receive the data of the Drum User Voice Bank.

Menu: [Help] menu

MOTIF XF Editor Owner’s Manual

Progress Bar

Shows how much of the data has been transmitted.

[Start] button

After setup is completed, click the [Start] button to actually execute data transmission.

[Stop] button

This button is available only when data transmission is being executed and allows you to cancel the

transmission.

[Help] menu

Manual

Selecting this menu calls up this manual in PDF format.

About

Selecting this menu calls up information such as the version number of the MOTIF XF Editor.

Menu: Auto Sync window

MOTIF XF Editor Owner’s Manual

Auto Sync window

This window is used for changing the status of the Editor from “OFFLINE” to “ONLINE.” While editing a parameter

on the Editor affects the same parameter on the MOTIF XF instrument and vice versa in the Online status, you can

disable the “mirroring” of parameter changes between the devices by switching to Offline status. The Auto Sync

window can be called up by clicking “OFFLINE” on the Editor window when the Editor is in the Offline status. The

Auto Sync window can also be called up automatically (without clicking “OFFLINE”) under the following

circumstances:

• When opening a file.

• When creating a new file by selecting “New” under the File menu.

• When changing the mode on the Editor in the Online status of the Editor.

• When changing the mode on the MOTIF XF instrument in the Online status of the Editor.

• When the connection between the MOTIF XF and a computer are corrected after appropriately correcting the

setup of the MOTIF XF and the computer.

• When the settings on the MOTIF XF instrument and the computer are corrected after appropriately reconnecting

the devices.

n If the Auto Start parameter is set to “On” in the Auto Sync window, data synchronization may be started automatically as

soon as the Auto Sync window is opened in certain conditions. For details, see page 41.

On the Auto Sync window, set the Data Port properly then click [Start] button to execute data synchronization. As

soon as the data synchronization is completed, the Auto Sync window is closed then the OFFLINE indication

changes to ONLINE automatically.

[X] (Close) button

Click this to close this window without executing data synchronization.

[FW/1394]/[USB] checkboxes

[Detail] button

Port

Device No.

Auto Sync Setting

These parameters are same as in the Setup window. See page 40.

Progress Bar

[Start] button

[Stop] button

These parameters are same as in the Data Sync window. See page 51.

MOTIF XF Editor Owner’s Manual 53

Troubleshooting

If you encounter problems such as no sound output or abnormal behavior, verify the connections before

checking the following.

Sound does not change when using the knobs or sliders.

• Is “ONLINE” indicated on the Editor window?

• Is the lamp at left of “ONLINE” indicator turned on?

If it is turned off, the settings related to communication between the MOTIF XF and a computer may be

wrong. Check the MIDI Port setting (page 40) on the MOTIF XF Editor, the MIDI IN/OUT parameter setting in

the MIDI display of the Utility mode on the MOTIF XF instrument, or the cable connection between the

MOTIF XF and the computer.

• Check the MIDI Port setting and Device No. setting. (page 41)

Bulk data is not transmitted/received successfully.

• Check the same points as above such as “ONLINE” indication and MIDI Port settings.

The appropriate Port is not shown in the Setup window.

• The MIDI Port in the Setup window can be selected from the Ports specified in the Cubase series. Check the

MIDI Port settings in the Cubase series.

• When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the previously

used Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the Cubase

series.

Cannot be set to ONLINE or “Port Open Error” is shown.

• Check whether or not the MOTIF XF is connected to the computer properly, and check whether or not the

power of the MOTIF XF6/7/8 is turned on.

• On Windows, quit any application software which may be using the MOTIF XF6/7/8 Port. If the application

software closes unexpectedly without user input, restart the computer.

“Time Out Error” or “Communication Time Out Error” is shown.

• This message appears when the computer cannot get the response from the MOTIF XF6/7/8 and another

error occurs. Check whether or not the Receive Bulk parameter and the MIDI In/Out parameter of the MOTIF

XF are set properly in the Utility display called up via [UTILITY]  [F5]  [SF2].

The MOTIF XF Editor may be revised and updated without prior notice.

For details and the latest information on the Editor, refer to the following URL:

http://www.yamahasynth.com/downloads/

U.R.G., Digital Musical Instruments Division

011MW-A0

Yamaha MOTIF XF7 EDITOR El manual del propietario

Marca: Yamaha

Modelo: MOTIF XF7 EDITOR

Categoría: Equipo musical

Tipo: El manual del propietario

Descargar PDF

informe

en otros idiomas

français: Yamaha MOTIF XF7 EDITOR Le manuel du propriétaire
italiano: Yamaha MOTIF XF7 EDITOR Manuale del proprietario
English: Yamaha MOTIF XF7 EDITOR Owner's manual
Deutsch: Yamaha MOTIF XF7 EDITOR Bedienungsanleitung
русский: Yamaha MOTIF XF7 EDITOR Инструкция по применению
Nederlands: Yamaha MOTIF XF7 EDITOR de handleiding
português: Yamaha MOTIF XF7 EDITOR Manual do proprietário
dansk: Yamaha MOTIF XF7 EDITOR Brugervejledning
polski: Yamaha MOTIF XF7 EDITOR Instrukcja obsługi
čeština: Yamaha MOTIF XF7 EDITOR Návod k obsluze
svenska: Yamaha MOTIF XF7 EDITOR Bruksanvisning
Türkçe: Yamaha MOTIF XF7 EDITOR El kitabı
suomi: Yamaha MOTIF XF7 EDITOR Omistajan opas
română: Yamaha MOTIF XF7 EDITOR Manualul proprietarului

Yamaha MOTIF XF7 EDITOR El manual del propietario

Yamaha MOTIF XF7 EDITOR El manual del propietario

en otros idiomas

Artículos relacionados