HDX SL-WSUS-110B Guía de instalación

Please inspect box contents to ensure you have received all components

Note: the black circular plastic tops in between the shelves are used only for packaging purposes.

They are NOT NEEDED. Please discard.

Locate the desired position of the bottom shelf (A). Ensure that it is no more

than 6 in. from the floor.

Place two tapered sleeves (B) into the appropriate groove on each pole

assembly. Make sure the “UP” arrow is facing up.

Place the shelf (A) on its side and slide each pole assembly with tapered locks

through the bottom of the shelf (A) until snug. Make sure that the shelf corner

cylinders are positioned over the slip sleeves.

After all pole assemblies are in place, position the unit in the upright position.

Push down on each corner of the shelf (A), ensuring the shelf (A) is in a fully

locked position.

black plastic tops

down

HDX

Note:

the tapered sleeves must be at the same height for each pole

to ensure the shelf sit on the sleeves levelly.

UPSIDE (level side)

Please read the manual carefully before you start assembling

HOMEDEPOT.COM

Please contact 1 (855) 439-4663 for further assistance.

customer.solutions@yahoo.com

Between 9 a.m and 4 p.m(Central Time) Monday to Friday

Item #SL-WSUS-110B

Model #1001078103

MOC.TOPEDEMOH

Póngase en contacto con el 1 (855) 439-4663 para asistencia adicional.

Entre las 9 a.m y las 4 p.m (Hora del Centro) de lunes a viernes

las cubiertas de

plástico negro

Descargar PDF