Yamaha HTR-2071 El manual del propietario

Marca: Yamaha

Modelo: HTR-2071

Categoría: Receptores AV

Tipo: El manual del propietario

AV Receiver

Owner's Manual

• This unit is a product for enjoying video and music at home.

• This manual explains preparations and operations for everyday users of the unit.

• Read the supplied booklet “Quick Start Guide” before using the unit.

CONTENTS

BEFORE USING THE UNIT 4

Accessories................................................................................................ 4

How to use this manual............................................................................ 4

Remote control.......................................................................................... 4

Insert the batteries................................................................................................................................................................... 4

Operating range of the remote control........................................................................................................................... 4

FEATURES 5

What you can do with the unit................................................................. 5

Part names and functions......................................................................... 7

Front panel................................................................................................................................................................................. 7

Front display (indicators)....................................................................................................................................................... 8

Rear panel................................................................................................................................................................................... 9

Remote control....................................................................................................................................................................... 10

PREPARATIONS 11

1 Placing speakers............................................................................... 12

Typical speaker layouts....................................................................................................................................................... 13

Other speaker layouts.......................................................................................................................................................... 14

2 Connecting speakers........................................................................ 15

Connecting speaker cables................................................................................................................................................ 16

Connecting the subwoofer (with built-in amplifier)................................................................................................. 16

3 Connecting a TV/playback devices.................................................. 17

Input/output jacks and cables.......................................................................................................................................... 17

Connecting a TV..................................................................................................................................................................... 18

Connecting video devices (such as BD/DVD players).............................................................................................. 18

Connecting audio devices (such as CD players)......................................................................................................... 20

4 Connecting the FM antenna............................................................. 20

5 Connecting the power cable............................................................ 21

6 Selecting an on-screen menu language.......................................... 22

7 Configure the speaker settings....................................................... 23

PLAYBACK 25

Basic playback procedure...................................................................... 25

Enjoying playback................................................................................................................................................................. 25

Switching information on the front display................................................................................................................. 25

Selecting the input source and favorite settings with one touch

(SCENE).................................................................................................... 26

Selecting a registered scene.............................................................................................................................................. 26

Registering a scene............................................................................................................................................................... 26

Selecting the sound mode..................................................................... 27

Enjoying sound field effects (CINEMA DSP)................................................................................................................. 28

Enjoying unprocessed playback...................................................................................................................................... 30

Enhancing the bass (Extra Bass)....................................................................................................................................... 31

Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed

Music Enhancer)

..................................................................................................................................................................... 31

Listening to FM radio.............................................................................. 32

Setting the frequency steps............................................................................................................................................... 32

Selecting a frequency for reception............................................................................................................................... 32

Registering favorite radio stations (presets)................................................................................................................ 33

Radio Data System tuning.................................................................................................................................................. 36

Configuring playback settings for different playback sources

(Option menu)......................................................................................... 37

Option menu items............................................................................................................................................................... 37

CONFIGURATIONS 41

Configuring various functions (Setup Menu)....................................... 41

Setup menu items................................................................................................................................................................. 42

Speaker...................................................................................................................................................................................... 44

HDMI........................................................................................................................................................................................... 47

Sound......................................................................................................................................................................................... 49

ECO............................................................................................................................................................................................. 51

Function.................................................................................................................................................................................... 52

Language.................................................................................................................................................................................. 54

Configuring the system settings (ADVANCED SETUP menu).............. 55

ADVANCED SETUP menu items........................................................................................................................................ 55

Selecting the remote control ID (REMOTE ID)............................................................................................................. 55

Changing the FM tuning frequency setting (TU)....................................................................................................... 56

Switching the video signal type (TV FORMAT)............................................................................................................ 56

Selecting the HDMI 4K signal format (4K MODE)....................................................................................................... 56

Restoring the default settings (INIT)............................................................................................................................... 57

Checking the firmware version (VERSION)................................................................................................................... 57

APPENDIX 58

Frequently asked questions................................................................... 58

Troubleshooting..................................................................................... 59

First, check the following:................................................................................................................................................... 59

Power, system and remote control................................................................................................................................. 59

Audio.......................................................................................................................................................................................... 60

Video.......................................................................................................................................................................................... 62

FM radio.................................................................................................................................................................................... 62

Error indications on the front display................................................... 63

Glossary................................................................................................... 64

Audio information................................................................................................................................................................. 64

HDMI and video information............................................................................................................................................. 64

Yamaha technologies.......................................................................................................................................................... 65

Information on HDMI.............................................................................. 66

HDMI Control.......................................................................................................................................................................... 66

Audio Return Channel (ARC)............................................................................................................................................. 68

HDMI signal compatibility.................................................................................................................................................. 68

Trademarks............................................................................................. 69

Specifications.......................................................................................... 70

BEFORE USING THE UNIT

Accessories

Check that the following accessories are supplied with the product.

£ FM antenna £ Remote control

£ Batteries (AAA, R03, UM-4) (x2)

£ CD-ROM (Owner's Manual

)

£ Quick Start Guide

* One of the above is supplied depending on

the region of purchase.

How to use this manual

• Some features are not available in certain regions.

• Due to product improvements, specifications and appearance are subject to

change without notice.

• This manual explains operations using the supplied remote control.

Notice:

Indicates precautions for use to avoid the possibility of malfunction/damage to the unit.

Note:

Indicates instructions and supplementary explanations for optimum use.

Remote control

The supplied remote control is used as follows.

Insert the batteries

Insert the batteries the right way round.

Operating range of the remote control

Point the remote control at the remote control sensor on the unit and remain within the

operating range shown below.

Within 6 m (20 ft)

30° 30°

FEATURES

What you can do with the unit

The unit is equipped with full of useful functions.

Supports 2- to 5.1-channel speaker system

You can enjoy your favorite acoustic spaces in various styles.

CINEMA DSP allows you to create stereo or multichannel sounds with

the sound fields like actual movie theaters and concert halls in your

own room.

• “Enjoying sound field effects (CINEMA DSP)” (p.28)

You can enjoy compressed music with enhanced sound (Compressed

Music Enhancer).

• “Playing back digitally compressed formats (such as MP3, etc.) with enriched sound

(Compressed Music Enhancer)”

(p.31)

Change the input source and favorite settings with

one touch (SCENE)

The SCENE function allows you to select the input source and settings registered to

the corresponding scene, such as sound program and Compressed Music Enhancer

on/off, with just one touch.

• “Selecting the input source and favorite settings with one touch (SCENE)” (p.26)

4K Ultra HD signal and HDCP 2.2 supported

You can enjoy the high definition video quality of 4K with HDCP 2.2 that complies with

the latest copyright protection.

• “Selecting the HDMI 4K signal format (4K MODE)” (p.56)

The ECO mode (power saving function) allows you to

create an eco-friendly home theater system

When the ECO mode is enabled, you can reduce the unit's power consumption.

• “ECO Mode” (p.51)

Sequential operation of a TV, AV receiver, and

BD/DVD player (HDMI Control)

When the unit is connected to an HDMI Control-compatible TV and BD/DVD player

with each HDMI cable, you can control the unit (such as power and volume) and

BD/DVD player with TV remote control operations.

• “HDMI Control” (p.66)

Connecting various devices

A number of HDMI jacks and various input/output jacks on the unit allow you to

connect video devices (such as BD/DVD players), audio devices (such as CD

players), game consoles, portable audio player, and other devices.

• “Connecting a TV/playback devices” (p.17)

Playing back TV audio in surround sound with a

single HDMI cable connection (Audio Return

Channel: ARC)

When using an ARC-compatible TV, you only need one HDMI cable to enable video

output to the TV, audio input from the TV, and the transmission of HDMI Control

signals.

• “Connecting a TV” (p.18)

Surround playback with 5 speakers placed in front

You can enjoy the surround sound even when the surround speakers are placed in

front.

• “Enjoying sound field effects without surround speakers (Virtual CINEMA

DSP)” (p.29)

Enhanced bass reproduction

Extra Bass allows you to enjoy enhanced bass reproduction that does not depend on

the speakers used.

• “Enhancing the bass (Extra Bass)” (p.31)

Listening to FM radio

The unit is equipped with a built-in FM tuner. You can register up to 40 favorite radio

stations as presets.

• “Listening to FM radio” (p.32)

Auto Rename function

The unit creates an input source name, displayed on the front display, automatically

according to the connected HDMI-compatible device.

• “Input Rename” (p.52)

Useful applications

The useful application for connections and operations of the unit is as follows.

Application for tablets “AV SETUP GUIDE”

AV SETUP GUIDE is an application that assists you with cable connections

between AV Receiver

and source devices as well as AV Receiver setup. This

app guides you through the various settings such as speaker connections, TV

and source device connections.

Functions:

1) Connection support guide

– Speaker connection

– TV/source devices connection

2) Setup support guide

– Various setup assistance with illustrations.

3) View Owner's Manual

* This application is for tablets only.

For details, search for “AV SETUP GUIDE” on the App Store or Google Play™.

Part names and functions

The part names and functions of the unit and the supplied remote control are as follows.

Front panel

INFO

MEMORY

PRESET

FM MODE MUTE

TUNING

PHONES

SILENT

CINEMA

VOLUME

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

2 8 93 41 5 6 7

B D E FA C

z (power) key

Turns on/off (standby) the unit.

Remote control sensor

Receives remote control signals (p.4).

INFO key

Selects the information displayed on the front display

(p.25).

MEMORY key

Registers FM radio stations as preset stations (p.33).

PRESET keys

Select a preset FM radio station (p.35).

TUNING keys

Select the radio frequency (p.32).

FM MODE key

Switch between “Stereo” and “Mono” for FM radio

reception (p.32).

MUTE

Mutes the audio output.

Front display

Displays information (p.8).

PHONES jack

For connecting headphones.

INPUT keys

Select an input source.

TONE CONTROL key

Adjusts the level of high-frequency range (Treble) and low-

frequency range (Bass

) individually (p.38).

SCENE keys

Select the registered input source and sound program with

one touch. Also, turns on the unit when it is in standby

mode (p.26).

PROGRAM keys

Select a sound program or a surround decoder (p.27).

STRAIGHT key

Enables/disables the straight decode mode (p.30).

VOLUME knob

Adjusts the volume.

Front display (indicators)

YPAO

VOL.

PARTY

ZONE

FPR

SBL SB SBR

FPL

VIRTUAL

3 B2 A

LINK

MASTER

ENHANCER

ECO

OUT

DRC

SLEEP

STEREO

TUNED

VOL.

MUTE

1 2 4 5 63

87 8

09 A B

HDMI

Lights up when HDMI signals are being input or output.

OUT

Lights up when HDMI signals are being output.

CINEMA DSP

Lights up when CINEMA DSP (p.28) is working.

SLEEP

Lights up when the sleep timer is on.

STEREO

Lights up when the unit is receiving a stereo FM radio

signal.

TUNED

Lights up when the unit is receiving an FM radio station

signal.

A-DRC

Lights up when Adaptive DRC (p.38) is working.

Volume indicator

Indicates the current volume.

ECO

Lights up when the eco mode (p.51) is enabled.

Cursor indicators

Indicate the remote control cursor keys currently

operational.

Information display

Displays the current status (such as input name and sound

mode name). You can switch the information by pressing

INFO (p.

25).

ENHANCER

Lights up when Compressed Music Enhancer (p.31) is

working.

Speaker indicators

Indicate speaker terminals from which signals are output.

A Front speaker (L)

S Front speaker (R)

D Center speaker

F Surround speaker (L)

G Surround speaker (R)

L Subwoofer

MUTE

Blinks when audio is temporarily muted.

Rear panel

SUB

WOOFER

7 85 6

3 4

▪ The area around the video/audio output jacks is marked in white

on the actual product to prevent improper connections.

HDMI OUT jack

For connecting to an HDMI-compatible TV and outputting

video/audio signals (

p.17). When using ARC, TV audio

signal can also be input through the HDMI OUT jack.

HDMI 1–4 jacks

For connecting to HDMI-compatible playback devices and

inputting video/audio signals (

p.18).

ANTENNA jack

For connecting to FM antenna (p.20).

Power cable

For connecting to an AC wall outlet (p.21).

AUDIO 1–5 jacks

For connecting to audio playback devices and inputting

audio signals (

p.18).

SUBWOOFER PRE OUT jack

For connecting to a subwoofer (with built-in amplifier)

(p.15).

SPEAKERS terminals

For connecting to speakers (p.15).

VOLTAGE SELECTOR

(Brazil and General models only)

Selects the switch position according to your local voltage

(p.21).

Remote control

TUNING

MUTE

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

PRESET

VOLUME

PROG RAM

STRAIGHT

ENHANCER BASS

INPUT

DVD

S C E NE

RADIO

SLEEP

BLUE

YELLOWGREEN

RED

Remote control signal transmitter

Transmits infrared signals.

z (receiver power) key

Turns on/off (standby) the unit.

SLEEP key

Pressing this key repeatedly will specify the time (120 min,

90 min, 60 min, 30 min, off), in which the unit switches to

the standby mode.

SCENE keys

Select the registered input source and sound program with

one touch. Also, turn on the unit when it is in standby mode

(p.26).

Sound mode keys

Select a sound mode (p.27).

Input selection keys

Select an input source for playback.

SETUP key

Displays the setup menu (p.41).

Menu operation keys

Cursor keys

Select a menu or the parameter.

ENTER

Confirms a selected item.

RETURN

Returns to the previous screen.

89: External device operation keys

Control playback or operate menus of the playback

devices connected to the unit with an HDMI cable.

Note

▪ The playback devices must support HDMI Control. Some

HDMI Control-compatible devices cannot be used.

▪ You can assign the unit's functions to the RED/GREEN/

YELLOW/BLUE keys (

p.53).

:C Radio keys

Operate the FM radio when “TUNER” is selected as the

input source (p.32).

MEMORY

Registers FM radio stations as presets.

PRESET

Select a preset station.

TUNING

Select the radio frequency.

VOLUME keys

Adjust the volume.

MUTE key

Mutes the audio output.

OPTION key

Displays the option menu (p.37).

DISPLAY key

Turns on/off the browse screen, playback screen, etc.

PREPARATIONS

General setup procedure

1 Placing speakers................................................................................................................................ (p.12)

2 Connecting speakers........................................................................................................................ (p.15)

3 Connecting a TV/playback devices.................................................................................................. (p.17)

4 Connecting the FM antenna............................................................................................................. (p.20)

5 Connecting the power cable............................................................................................................ (p.21)

6 Selecting an on-screen menu language.......................................................................................... (p.22)

7 Configure the speaker settings........................................................................................................ (p.23)

This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!

1 Placing speakers

Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker

layout examples.

Notice

▪ Use speakers with an impedance of at least 6 W.

▪ Be sure to connect the front left and right speakers.

Typical speaker layouts

5.1-channel system

We recommend this speaker layout which can maximize the performance of the unit.

4 5

1 2

10° to 30° 10° to 30°

Speaker type Abbr. Function

Front (L/R)

1/2

Produce front left/right channel sounds (stereo sounds).

Center

Produces center channel sounds (such as movie dialogue

and vocals).

Surround (L/R)

4/5

Produce surround left/right channel sounds.

Subwoofer

Produces LFE (low-frequency effect) channel sounds and

reinforces the bass parts of other channels.

This channel is counted as “0.1”.

Note

▪ You can enjoy surround sound even without the center speaker (4.1-channel system).

▪ You can place the subwoofer either in the left or right side.

5.1-channel system (Virtual CINEMA FRONT)

We recommend this speaker layout when the speakers can't be placed in back of the

room.

1 2

4 5

Speaker type Abbr. Function

Front (L/R)

1/2

Produce front left/right channel sounds (stereo sounds).

Center

Produces center channel sounds (such as movie dialogue

and vocals).

Surround (L/R)

4/5

Produce surround left/right channel sounds. By this

system, place the surround speakers in front.

Subwoofer

Produces LFE (low-frequency effect) channel sounds and

reinforces the bass parts of other channels.

This channel is counted as “0.1”.

Note

▪ To utilize this configuration, set “Virtual CINEMA FRONT” (p.45) in the “Setup” menu to “On”.

▪ You can enjoy surround sound even without the center speaker (front 4.1-channel system).

▪ You can place the subwoofer either in the left or right side.

Other speaker layouts

The following speaker layouts are also available.

3.1-channel system

1 2

2.1-channel system

1 2

2 Connecting speakers

Connect the speakers placed in your room to the unit. The following diagrams provide connections for a 5.1-channel system as an example. For other systems, connect speakers

while referring to the connection diagram for the 5.1-channel system.

Notice

▪ Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the speakers.

▪ The speaker has the polarity (+/-). Connect the speaker cable correctly between the positive (+) terminal of the unit and the speaker, and also between the negative (-) terminal of them.

Cables required for connection (commercially available)

Speaker cables (x the number of speakers)

–

Audio pin cable (x1: for connecting a subwoofer with built-in amplifier)

SUB

WOOFER

SUB

WOOFER

5 4

10 mm

(3/8”)

Subwoofer with built-in amplifier

Surround (L)Surround (R) Center Front (R) Front (L)

10 mm

(3/8”)

Precaution for connecting of the speaker cables

▪ Prepare speaker cables in a place away from the unit, to avoid

accidentally dropping wire strands into the unit's interior which could

result in a short circuit or malfunction of the unit.

▪ Improper connecting of the speaker cables may cause short circuit and

also damage the unit or the speakers.

– Twist the bare wires of the speaker cables

firmly together.

– Do not let the bare wires of the speaker

cable touch one another.

– Do not let the bare wires of the speaker

cable come into contact with the unit’s

metal parts (rear panel and screws).

▪ If “Check SP Wires” appear on the front display when the unit is turned

on, turn off the unit, and then check the speaker cables short circuit.

Subwoofer

Audio pin cable

Use one type of subwoofer or the other.

Connecting speaker cables

Speaker cables have two wires. One is for connecting the negative (-) terminals of the

unit and the speaker to each other, and the other is for the positive (+) terminals. If the

wires are colored to prevent confusion, connect the black wire to the negative and the

other wire to the positive terminal.

Connecting front speakers

Remove approximately 10 mm (3/8”) of insulation from the ends of

the speaker cable, and twist the bare wires of the cable firmly

together.

Loosen the speaker terminal.

Insert the bare wires of the cable into the gap on the side (upper

right or bottom left) of the terminal.

Tighten the terminal.

FRONT

+ (red)

- (black)

Using a banana plug

(Canada, China, Brazil and General models only)

Tighten the speaker terminal.

Insert a banana plug into the end of the terminal.

FRONT

Banana plug

Connecting center/surround speakers and a subwoofer

Remove approximately 10 mm (3/8”) of insulation from the ends of

the speaker cable, and twist the bare wires of the cable firmly

together.

Press down the tab.

Insert the bare wires of the cable into the hole in the terminal.

Release the tab.

SURROUND

CENTER

+ (red)

- (black)

Connecting the subwoofer (with built-in amplifier)

Use an audio pin cable to connect the subwoofer.

Audio pin cable

3 Connecting a TV/playback devices

The unit is equipped with a variety of input jacks

including HDMI input jacks to allow you to connect

different types of playback devices.

Input/output jacks and cables

Video/audio jacks

HDMI jacks

Transmit digital video and digital sound through a

single jack. Use an HDMI cable.

HDMI cable

Note

▪ Use a 19-pin HDMI cable with the HDMI logo. We

recommend using a cable less than 5.0 m (16.4 ft) long to

prevent signal quality degradation.

▪ The unit’s HDMI jacks support the HDMI Control, Audio

Return Channel (ARC), and 3D and 4K Ultra HD video

transmission (through output) features.

▪ Use a Premium High Speed HDMI Cable or Premium High

Speed Cable with Ethernet to enjoy 3D or 4K Ultra HD videos.

Audio jacks

OPTICAL jack

Transmit digital audio signals. Use a digital optical

cable. If there is a protective cap on the tip of the

cable, remove it before using the cable.

OPTICAL

Digital optical cable

COAXIAL jacks

Transmit digital audio signals. Use a digital coaxial

cable.

Digital coaxial cable

AUDIO jacks

(Stereo L/R jacks)

Transmit analog stereo audio signals. Use a stereo

pin cable (RCA cable).

Stereo pin cable

Connecting a TV

Connect the TV to the unit with an HDMI cable and a digital optical cable.

HDMI

OPTICAL

HDMI

OPTICAL

O OO O

The unit (rear)

AUDIO 1 (OPTICAL) jack

HDMI OUT jack HDMI input

Audio output

(digital optical)

Note

▪ A digital optical cable connection allows audio from the TV to be played back on the unit. A digital optical

cable connection is not needed in the following cases:

– If your TV supports Audio Return Channel (ARC)

– If you will receive TV broadcasts only from the set-top box

▪ If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s

power and volume with the TV’s remote control.

To use HDMI Control and ARC, you need to configure the HDMI settings on the unit.

For details on the settings, see “Information on HDMI”

(p.66).

About Audio Return Channel (ARC)

▪ ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a

single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.

▪ When using ARC, connect a TV with an HDMI cable that supports ARC.

Connecting video devices (such as BD/DVD players)

Connect video devices such as BD/DVD players, set-top boxes (STBs) and game

consoles to the unit. Depending on the video/audio output jacks available on your

video device, choose one of the following connections. We recommend using an

HDMI connection if the video device has an HDMI output jack.

HDMI connection

Connect a video device to the unit with an HDMI cable.

HDMI

The unit (rear)

HDMI OUT jack

HDMI 1–4 jacks

Video device

If you select HDMI 1–4 as the input source by pressing INPUT, the video/audio played

back on the video device will be output from the unit.

Note

To watch videos input to the HDMI 1–4 jacks, you need to connect your TV to the HDMI OUT jack of the unit

(p.18).

Changing the combination of video/audio input jacks

If the combination of video/audio input jacks available on the unit does not match your

video device, change its combination according to the output jacks of your device.

You can connect a video device that has the following video/audio output jacks.

Output jacks on video device Input jacks on the unit

Video Audio Video Audio

HDMI

Digital optical HDMI 1–4 AUDIO 1 (OPTICAL)

Digital coaxial HDMI 1–4 AUDIO 2-3 (COAXIAL)

Analog stereo HDMI 1–4 AUDIO 4-5 (AUDIO)

Necessary setting

For example, if you have connected a video device to HDMI 2 and AUDIO 1

(OPTICAL) jack of the unit, change the combination setting as follows.

OPTICAL

HDMI

HDMI HDMI

OPTICAL

O O

The unit (rear)

AUDIO 1 (OPTICAL) jack

HDMI 2 jack

HDMI OUT jack

Audio output

(digital optical)

Set-top box

After connecting external devices (such as a TV and playback

devices) and power cable of the unit, turn on the unit.

Press INPUT to select “HDMI2” (video input jack to be used) as

the input source.

Press OPTION.

MUTE

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

TUNING

MUTE

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

PRESET

VOLUME

PROGR AM

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

BLUE

YELLOWGREEN

RED

MUT

P MENU

HOME

POP-UP/MENU

DISPLA

DISPLADISPLA

DISPLA

DISPLADISPLA

DISPLA

RETURN

RETURNRETURN

RETURN

SETU

OPTION

ENTER

Cursor keys

Use the cursor keys (q/w) to select “Audio In” and press

ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

VOL .

Audio In

Use the cursor keys (e/r) to select “AUDIO 1” (audio input

jack to be used).

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

VOL .

Audio•••AUDIO1

Press OPTION.

This completes the necessary settings.

If you select “HDMI2” as the input source by pressing INPUT, the video/audio

played back on the video device will be output from the unit.

Connecting audio devices (such as CD players)

Connect audio devices such as CD players and MD players to the unit. Depending on

the audio output jacks available on your audio device, choose one of the following

connections.

Audio output jacks on audio device Audio input jacks on the unit

Digital optical AUDIO 1 (OPTICAL)

Digital coaxial AUDIO 2-3 (COAXIAL)

Analog stereo AUDIO 4-5 (AUDIO)

COAXIAL

OPTICAL

COAXIAL

OPTICAL

C C

O O

The unit (rear)

AUDIO 1–5 jacks Audio output

(either digital optical, digital coaxial,

or analog stereo)

Audio device

If you select AUDIO 1-5 as the input source by pressing INPUT, the audio played back

on the audio device will be output from the unit.

4 Connecting the FM antenna

Connect the supplied FM antenna to the unit.

Fix the end of the FM antenna to a wall.

SUB

WOOFER

The unit (rear)

FM antenna

5 Connecting the power cable

Warning

(Brazil and General models only)

Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall

outlet. Improper setting of

VOLTAGE SELECTOR

may cause damage to the unit and create a potential

fire hazard.

Before connecting the power cable

Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110–

120/220–240 V, 50/60 Hz.

SUB

WOOFER

VOLTAGE

SELECTOR

110V

–

120V

220V

–

240V

The unit (rear) VOLTAGE SELECTOR

After all the connections are complete, plug in the power cable.

SUB

WOOFER

The unit (rear)

To an AC wall outlet

6 Selecting an on-screen menu language

Select the desired on-screen menu language.

Press z (receiver power) to turn on the unit.

Turn on the TV and switch the TV input to display video from the

unit (HDMI OUT jack).

Note

Operations with TV screen are available only when your TV is connected to the unit via HDMI. If

not, carry out operations while viewing the front display.

Press SETUP.

Use the cursor keys to select “Language” and press ENTER.

Use the cursor keys to select the desired language.

To exit from the menu, press SETUP.

Note

The information on the front display is provided in English only.

7 Configure the speaker settings

Press RECEIVER z to turn on the unit.

Turn on the TV and switch the TV input to display video from the

unit (HDMI OUT jack).

Press SETUP.

Use the cursor keys to select “Speaker” and press ENTER.

Configure the output characteristics of the speakers.

Use the cursor keys to select “Configuration” and press ENTER.

Use the cursor keys (q/w) to select an item and cursor keys (e/r) to

select a setting.

When setting is complete, press RETURN.

Item Function Settings

Subwoofer

Selects whether or not a subwoofer is

connected.

Use, None

Front

Selects the size of the front speakers. Small, Large

Center

Selects whether or not a center speaker is

connected and its size.

Small, Large, None

Surround

Selects whether or not surround speakers

are connected and their size.

Small, Large, None

Note

▪ Default settings are underlined.

▪ When you configure the speaker size, select “Large” if the woofer diameter of your speaker is

16cm (6-1/4”) or larger or “Small

” if it is smaller than 16cm (6-1/4”).

▪ For configuration items other than the above, see “Setup” menu (p.41).

Set the distance between each speaker and listening position.

Use the cursor keys to select “Distance” and press ENTER.

Use the cursor keys (q/w) to select speaker and cursor keys (e/r) to

set distance.

When setting is complete, press RETURN.

Setting items

Speaker Setting range

Front L

Front speaker (L)

0.30 m to 24.00 m

(default: 3.00 m)

Front R

Front speaker (R)

0.30 m to 24.00 m

(default: 3.00 m)

Center

Center speaker

0.30 m to 24.00 m

(default: 2.60 m)

Surround L

Surround speaker (L)

0.30 m to 24.00 m

(default: 2.40 m)

Surround R

Surround speaker (R)

0.30 m to 24.00 m

(default: 2.40 m)

Subwoofer

0.30 m to 24.00 m

(default: 3.00 m)

Note

You can select the unit of distance from “Meter” (default) or “Feet” in “Unit”.

Adjust the volume of each speaker.

Use the cursor keys to select “Test Tone” and press ENTER.

Use the cursor keys (e/r) to select “On” to enable the test tone output

and press RETURN.

Use the cursor keys (q/w) to select “Level” and press ENTER.

Use the cursor keys (q/w) to select a speaker to output test tones.

If you find a speaker with a different volume level to the others, use the

cursor keys (e/r) to adjust the volume.

When setting is complete, press RETURN.

Set “Test Tone” to “Off” (repeat steps 1 and 2).

Setting items

Speaker Setting range

Front L

Front speaker (L)

-10.0 dB to +10.0 dB

(default: 0.0 dB)

Front R

Front speaker (R)

-10.0 dB to +10.0 dB

(default: 0.0 dB)

Center

Center speaker

-10.0 dB to +10.0 dB

(default: -1.0 dB)

Surround L

Surround speaker (L)

-10.0 dB to +10.0 dB

(default: -1.0 dB)

Surround R

Surround speaker (R)

-10.0 dB to +10.0 dB

(default: -1.0 dB)

Subwoofer

-10.0 dB to +10.0 dB

(default: 0.0 dB)

Note

Use one of the front speakers as a measuring target when adjusting volumes.

To exit from the menu, press SETUP.

The speaker settings are complete.

PLAYBACK

Basic playback procedure

Enjoying playback

Turn on the external devices (such as a TV or BD/DVD player)

connected to the unit.

Use the input selection keys to select an input source.

MUTE

PRESET

VOLUME

PROG RAM

INPUT

TUNING

MUTE

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

PRESET

VOLUME

PROGR AM

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

BLUE

YELLOWGREEN

RED

OG R

VOLUME

MUTE

Input selection keys

Start playback on the external device or select a radio station.

Refer to the instruction manual for the external device.

For details on the following operations, see the corresponding pages.

▪ “Listening to FM radio” (p.32)

Press VOLUME to adjust the volume.

Note

▪ To mute the audio output, press MUTE. Press MUTE again to unmute.

▪ To adjust the treble/bass settings, use the “Option” menu or TONE CONTROL on the front panel

(p.38).

Switching information on the front display

Press INFO repeatedly to select between the various display

items.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

VOL .

Audio Decoder

Item name

About 3 seconds after a display item is selected, its corresponding

information appears.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

VOL .

DPL

Information

Note

Available items vary depending on the selected input source. The displayed item can also be

applied separately to each input source.

Currently input source Item

HDMI 1-4

AUDIO 1-5

Input (input source name), DSP Program (sound mode name), Audio

Decoder (decoder name*)

TUNER

Frequency (frequency), DSP Program (sound mode name), Audio

Decoder (decoder name*)

(U.K. and Europe models only)

Radio Data System data is also available when the unit is tuned into a

Radio Data System broadcasting station (p.36).

* The name of the audio decoder currently activated is displayed. If no audio decoder

is activated, “Decoder Off” appears.

Selecting the input source and favorite settings with one touch (SCENE)

The SCENE function allows you to select the assigned input source, sound program,

and Compressed Music Enhancer on/off with just one touch.

Selecting a registered scene

Press SCENE.

The input source and settings registered to the corresponding scene are

selected. The unit turns on automatically when it is in standby mode.

TUNING

MUTE

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

PRESET

VOLUME

PROGR AM

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

BLUE

YELLOWGREEN

RED

PROG RAM

STRAIGHT

ENHANCER BASS

DVD

S C E NE

RADIO

SLEEP

OG R

IGH

ENHANCER

SLEE

SCENE

By default, the following settings are registered for each scene.

SCENE

Input

HDMI1 AUDIO1 AUDIO2 TUNER

Sound program

MOVIE (Sci-Fi) STRAIGHT STRAIGHT

STEREO

(5ch Stereo

)

Compressed Music

Enhancer

Off On Off On

SCENE link playback

On On Off Off

Note

The SCENE link playback function allows you to automatically turn on the TV or start playback of an external

device connected to the unit via HDMI, in conjunction with a scene selection. To enable

SCENE link

playback, set “SCENE” (p.48) in the “Setup” menu to “On”.

Registering a scene

Perform the following operations to prepare the settings you want

to assign to a scene.

▪ Select an input source (p.25)

▪ Select a sound program (p.27) or straight decode (p.30)

▪ Enable/disable Compressed Music Enhancer (p.31)

Hold down the desired SCENE key until “SET Complete” appears

on the front display.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

VOL .

SET Complete

Selecting the sound mode

The unit is equipped with a variety of sound programs and surround decoders that

allow you to enjoy playback sources with your favorite sound mode (such as sound

field effect or stereo playback).

TUNING

MUTE

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

PRESET

VOLUME

PROGR AM

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

BLUE

YELLOWGREEN

RED

PROG RAM

STRAIGHT

ENHANCER BASS

DVD

S C E NE

RADIO

SLEEP

S C E N

ADIO

SLEE

STRAIGHT

ENHANCER

BASS

PROGRAM

I want to enjoy viewing video sources such as movies, TV programs, or

games.

• Select a sound program suitable for each video source by pressing PROGRAM

repeatedly (

p.28).

I want to enjoy listening to music sources or stereo playback.

• Select a sound program suitable for music or stereo playback by pressing

PROGRAM

repeatedly (p.29).

I want to enjoy multichannel playback from 2-channel sources.

• Select a surround decoder in the “Option” menu (p.37).

I want to enjoy unprocessed sounds in original channels.

• Switch to the straight decode mode by pressing STRAIGHT (p.30).

I want to enjoy enhanced bass sounds.

• Enable Extra Bass by pressing BASS (p.31).

I want to enjoy listening to compressed music.

• Enable Compressed Music Enhancer by pressing ENHANCER (p.31).

This mode lets you enjoy listening to compressed music as it gives the music

additional depth and breadth (p.

31).

Note

▪ The sound mode can be applied separately to each input source.

▪ When you play back audio signals with a sampling rate of higher than 96 kHz, the straight decode mode

(p.30) is automatically selected.

▪ You can check which speakers are currently outputting sound by looking at the speaker indicators on the

unit’s front panel (p.8).

Enjoying sound field effects (CINEMA DSP)

The unit is equipped with a variety of sound programs that utilize Yamaha’s original

DSP technology (CINEMA DSP). It allows you to easily create sound fields like actual

movie theaters or concert halls in your room.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

SLEEP

STEREO

VOL .

Sci-Fi

Sound program category

“CINEMA DSP” lights up

Sound program

Note

You can adjust the sound field effect level in “DSP Level (DSP Level)” (p.38) in the “Option” menu.

Sound programs suitable for movies (MOVIE)

The following sound programs are optimized for viewing video sources, such as

movies, TV programs, and games.

Standard

This program creates a sound field that emphasizes the surround feeling

without disturbing the original acoustic positioning of multichannel audio,

such as Dolby Digital and DTS. Its design is based on the concept of the

ideal movie theater, in which the audience is surrounded by beautiful

reverberations from the left, right, and rear.

Spectacle

This program delivers the scale and grandeur of spectacular movie

productions. It delivers an expansive sound space to match the

cinemascope wide-screen, and boasts a broad dynamic range,

providing everything from small delicate sounds to powerful loud booms.

Sci-Fi

This program clearly reproduces the finely elaborated sound design of

the latest Sci-Fi and SFX movies. You can enjoy a variety of

cinematographically created virtual spaces reproduced with clear

separation between dialogue, sound effects, and background music.

Adventure

This program is ideal for reproducing the sound design of action and

adventure movies precisely. The sound field restrains reverberations, but

puts emphasis on reproducing a sensation of expansiveness on both

sides, powerful space expanded widely to the left and right. The

restrained depth creates a clear and powerful space, while also

maintaining the articulation of the sounds and the separation of the

channels.

Drama

This program features stable reverberations that match a wide range of

movie genres, from serious dramas to musicals and comedies. The

reverberations are modest, but suitably stereophonic. The sound effects

and background music are reproduced with a gentle echo that does not

impinge on the articulation of the dialogue. You’ll never get tired listening

for long periods.

Mono Movie

This program reproduces monaural video sources, such as classic

movies, in an atmosphere of a good old movie theater. The program

creates a pleasant space with depth, by adding breadth and the

appropriate reverberation to the original audio.

Sports

This program allows listeners to enjoy the rich vividness of sport

broadcasts and light entertainment programs. In sports broadcasts, the

commentators’ voices are positioned clearly at the center, while the

atmosphere inside the stadium is realistically conveyed by the peripheral

delivery of the sounds of the fans in a suitable space.

Action Game

This program is suitable for action games, such as car racing and

fighting games. The reality of, and emphasis on, various effects makes

the player feel like they are right in the middle of the action, allowing for

greater concentration. Use this program in combination with Compressed

Music Enhancer for a more dynamic and strong sound field.

Roleplaying Game

This program is suitable for role-playing and adventure games. This

program adds depth to the sound field for natural and realistic

reproduction of background music, special effects, and dialogue from a

wide variety of scenes. Use this program in combination with

Compressed Music Enhancer for a clearer and more spatial sound field.

Sound programs suitable for music (MUSIC)

The following sound programs are optimized for listening to music sources.

Hall in Munich

This program simulates a Munich concert hall with approximately 2,500

seats that uses stylish wood for the interior finishing. Fine, beautiful

reverberations spread richly, creating a calming atmosphere. The

listener’s virtual seat is at the center left of the arena.

Hall in Vienna

This program simulates a 1700-seat, middle-sized concert hall with a

shoebox shape that is traditional in Vienna. Pillars and ornate carvings

create extremely complex reverberations from all around the audience,

producing a very full, rich sound.

Chamber

This program creates a relatively wide space with a high ceiling, like an

audience hall in a palace. It offers pleasant reverberations that are

suitable for courtly music and chamber music.

Cellar Club

This program simulates an intimate concert venue with a low ceiling and

homey atmosphere. A realistic, live sound field delivers powerful sounds

that make you feel as if you are sitting in the front row in front of a small

stage.

The Roxy Theatre

This program creates the sound field of a 460-seat rock music concert

venue in Los Angeles. The listener’s virtual seat is at the center left of the

hall.

The Bottom Line

This program creates the sound field at stage front in The Bottom Line, a

famous New York jazz club once. The floor can seat 300 people to the

left and right in a sound field offering real and vibrant sound.

Music Video

This program allows you to enjoy videos of pop, rock, and jazz concerts,

as if you were there yourself. Immerse yourself in the hot concert

atmosphere thanks to the vividness of the singers and solos on stage, a

presence sound field that emphasizes the beat of rhythm instruments,

and a surround sound field that reproduces the space of a big live hall.

Sound programs suitable for stereo playback (STEREO)

You can select stereo playback.

2ch Stereo

Use this program to mix down multichannel sources to 2 channels. When

multichannel signals are input, they are down mixed to 2 channels and

output from the front speakers (this program does not utilize CINEMA

DSP).

5ch Stereo

Use this program to output sound from all speakers. When you play back

multichannel sources, the unit mixes down the source to 2 channels, and

then outputs the sound from all speakers. This program creates a larger

sound field and is ideal for background music at parties.

Enjoying sound field effects without surround speakers

(Virtual CINEMA DSP)

If you select one of the sound programs (except 2ch Stereo and 5ch Stereo) when no

surround speakers are connected, the unit automatically creates the surround sound

field using the front-side speakers.

Enjoying surround sound with 5 speakers placed in

front (Virtual CINEMA FRONT)

You can enjoy the surround sound even when the surround speakers are placed in

front.

Enjoying surround sound with headphones (SILENT

CINEMA)

You can enjoy surround or sound field effects, like a multichannel speaker system, with

stereo headphones by connecting the headphones to the

PHONES jack and selecting

a sound program or a surround decoder.

Enjoying unprocessed playback

You can play back input sources without any sound field effect processing.

Playing back in original channels (straight decode)

When the straight decode mode is enabled, the unit produces stereo sound from the

front speakers for 2-channel sources such as CDs, and produces unprocessed

multichannel sounds for multichannel sources.

Press STRAIGHT.

Each time you press the key, the straight decode mode is enabled or

disabled.

LINK

ECO

MASTER

OUT

DRC

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

SLEEP

STEREO

PARTY

TUNED

YPAO

VOL.

ENHANCER

VOL .

STRAIGHT

Playing back 2-channel sources in multichannel

(surround decoder)

The surround decoder enables unprocessed multichannel playback from 2-channel

sources. When a multichannel source is input, it works the same way as the straight

decode mode.

For details on each decoder see “Glossary” (p.64).

Press PROGRAM repeatedly to select a surround decoder.

The previously selected surround decoder is selected. You can change

the surround decoder in “Sur.Decode

” (p.37) in the “Option” menu.

TUNING

MUTE

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

PRESET

VOLUME

PROGR AM

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

BLUE

YELLOWGREEN

RED

PROG RAM

STRAIGHT

ENHANCER BASS

DVD

S C E NE

RADIO

SLEEP

IGH

ENHANCER

S C E N

ADIO

SLEE

PROGRAM

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

VOL .

DPL

“SUR. DECODE” appears

DPL

Uses the Dolby Pro Logic decoder suitable for all sources.

DPL Movie

Uses the Dolby Pro Logic II decoder suitable for movies.

DPL Music

Uses the Dolby Pro Logic II decoder suitable for music.

DPL Game

Uses the Dolby Pro Logic II decoder suitable for games.

Note

You can adjust the surround decoder parameters in “DSP Parameter” (p.49) in the “Setup” menu.

Enhancing the bass (Extra Bass)

Extra Bass allows you to enjoy enhanced bass sounds, regardless of the size of the

front speakers and the presence or absence of the subwoofer.

Press BASS.

Each time you press the key, Extra Bass is enabled or disabled.

Note

You can also use “Extra Bass” (p.45) in the “Setup” menu to enable/disable Extra Bass.

Playing back digitally compressed formats (such as

MP3, etc.) with enriched sound (Compressed Music

Enhancer)

Compressed Music Enhancer adds depth and breadth to the sound, allowing you to

enjoy a dynamic sound close to the original sound before it was compressed. This

function can be used along with any other sound modes.

Press ENHANCER.

Each time you press the key, Compressed Music Enhancer is enabled or

disabled.

LINK

ECO

MASTER

OUT

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

YPAO

VOL.

VOL .

Enhancer On

ENHANCER

“ENHANCER” lights up

Note

▪ Compressed Music Enhancer does not work on the following audio sources.

– Signals whose sampling frequency is over 48 kHz

– High-definition streaming audio

▪ You can also use “Enhancer (Enhancer)” (p.38) in the “Option” menu to enable/disable

Compressed Music Enhancer.

Listening to FM radio

You can tune into a radio station by specifying its frequency or selecting from

registered radio stations.

Note

▪ The radio frequencies differ depending on the country or region where the unit is being used. The

explanation of this section uses a display with frequencies used in U.K. and Europe models.

▪ If you cannot obtain good reception on the radio, adjust the direction of the FM antennas.

Setting the frequency steps

(Asia, Brazil and General models only)

At the factory, the frequency step setting is set to 50 kHz for FM. Depending on your

country or region, set the frequency steps to 100 kHz for FM.

Set the unit to standby mode.

When holding down STRAIGHT on the front panel, press z

(power).

(power)

STRAIGHTPROGRAM

Press PROGRAM repeatedly to select “TU”.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

TU••••••••FM50

Press STRAIGHT to select “FM100”.

Press z (power) to set the unit to standby mode and turn it on

again.

Selecting a frequency for reception

Press FM to select “TUNER” as the input source.

“TUNER” is selected as the input source and then the frequency currently

selected is displayed.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

MUT E VIRT UAL

VOL .

FM 87.50MHz

Press TUNING repeatedly to set a frequency.

Hold down the key for about a second to search stations automatically.

TUNING

MUTE

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

PRESET

VOLUME

PROGR AM

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

BLUE

YELLOWGREEN

RED

TUNING

MEMORY

BLUE

YELLOWGREEN

RED

MEMO

BLUE

YEL

GREEN

TUNING

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

VOL .

STEREO

TUNED

FM 98.50MHz

“TUNED” lights up when the unit is receiving an FM radio station signal.

“STEREO” lights up when the unit is receiving a stereo FM radio signal.

Note

▪ You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM radio reception by

selecting “

FM Mode” in the “Option” menu. When the signal reception for an FM radio station is

unstable, switching to monaural may improve it.

▪ You can watch videos input from external devices while listening to radio by selecting the video

input jack in

“Video Out (Video Out)” (p.40) in the “Option” menu.

Registering favorite radio stations (presets)

You can register up to 40 radio stations as presets. Once you have registered stations,

you can easily tune into them by selecting their preset numbers.

Registering radio stations automatically (Auto Preset)

Automatically register FM radio stations with strong signals (up to 40 stations).

Note

(U.K. and Europe models only)

Only Radio Data System broadcasting stations are registered automatically by the Auto Preset function.

Press FM to select “TUNER” as the input source.

Press OPTION.

Use the cursor keys to select “Preset” and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

VOL .

Preset

To start the Auto Preset process, press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRT UAL

STEREO

TUNED

FPR

SBL SB SBR

FPL

VOL .

01:FM 87.50MHz

“SEARCH” appears during Auto Preset

Preset number from which to start the registration

Note

▪ To specify the preset number from which to start the registration, press cursor keys (e/r) or

PRESET to select a preset number.

▪ To cancel the Auto Preset process, press RETURN.

When the Auto Preset process finishes, “FINISH” appears and the “Option” menu

closes automatically.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

VOL .

Auto Preset

Registering a radio station manually

Select a radio station manually and register it to a preset number.

Follow “Selecting a frequency for reception” (p.32) to tune into

the desired radio station.

Hold down MEMORY for a few seconds.

The first time that you do register a station, the selected radio station will

be registered to the preset number “01”. Thereafter, each radio station

you select will be registered to the next empty (unused) preset number

after the most recently registered number.

TUNING

MUTE

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

PRESET

VOLUME

PROGR AM

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

BLUE

YELLOWGREEN

RED

TUNING

MEMORY

BLUE

YELLOWGREEN

RED

TUNING

BLUE

YEL

GREEN

MEMORY

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRT UAL

FPR

SBL SB SBR

FPL

VOL .

01:FM 98.50MHz

STEREO

TUNED

Preset number

Note

To select a preset number for registering, press MEMORY once after tuning into the desired radio

station, press PRESET to select a preset number, and then press MEMORY again.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

PARTY

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

SLEEP

VOL .

02:Empty

TUNED

STEREO

“Empty” (not in use) or the frequency currently registered

Selecting a preset station

Tune into a registered radio station by selecting its preset number.

Press FM to select “TUNER” as the input source.

Press PRESET repeatedly to select the desired radio station.

MUTE

PRESET

VOLUME

PROG RAM

INPUT

TUNING

MUTE

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

PRESET

VOLUME

PROGR AM

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

BLUE

YELLOWGREEN

RED

MUT

LUME

OG R

PRESET

ENHANCER

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRT UAL

FPR

SBL SB SBR

FPL

LINK

ECO

MASTER

OUT

VOL .

STEREO

TUNED

01:FM 98.50MHz

Note

“No Presets” appears when no radio stations are registered.

Clearing preset stations

Clear radio stations registered to the preset numbers.

Press FM to select “TUNER” as the input source.

Press OPTION.

Use the cursor keys to select “Preset” and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

VOL .

Preset

Use the cursor keys (q/w) to select “CLEAR”.

Use the cursor keys (e/r) to select a preset station to be cleared

and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRT UAL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

01:FM 98.50MHz

Preset station to be cleared

If the preset station is cleared, “Cleared” appears and then the next in-use

preset number is displayed.

01:Cleared

Repeat step 5 until all desired preset stations are cleared.

To exit from the menu, press OPTION.

Radio Data System tuning

(U.K. and Europe models only)

Radio Data System is a data transmission system used by FM stations in many

countries. The unit can receive various types of Radio Data System data, such as

“Program Service”, “Program Type”, “Radio Text

” and “Clock Time”, when it is tuned

into a Radio Data System broadcasting station.

Displaying the Radio Data System information

Tune into the desired Radio Data System broadcasting station.

Note

We recommend using “Auto Preset” to tune into the Radio Data System broadcasting stations

(p.33).

Press INFO repeatedly to select between the various display

items.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRT UAL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

Program Type

Item name

About 3 seconds after a display item is selected, its corresponding

information appears.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRT UAL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

CLASSICS

Information

Program Service

Program service name

Program Type

Current program type

Radio Text

Information on the current program

Clock Time

Current time

DSP Program

Sound mode name

Audio Decoder

Decoder name

Frequency

Note

“Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio

station does not provide the Radio Data System service.

Receiving traffic information automatically

When “TUNER” is selected as the input source, the unit automatically receives traffic

information. To enable this function, follow the procedure below to set the traffic

information station.

When “TUNER” is selected as the input source, press OPTION.

Use the cursor keys to select “Traffic Program” (TrafficProgram)

and press ENTER.

The traffic information station search will start in 5 seconds. Press ENTER

again to start the search immediately.

Note

▪ To search upward/downward from the current frequency, press the cursor keys (q/w) while

“READY” is displayed.

▪ To cancel the search, press RETURN.

▪ Texts in parentheses denote indicators on the front display.

The following screen appears for about 3 seconds when the search

finishes.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRT UAL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

TP FM101.30MHz

Traffic information station (frequency)

Note

“TP Not Found” appears for about 3 seconds when no traffic information stations are found.

Configuring playback settings for different playback sources (Option menu)

You can configure separate playback settings for different playback sources. This

menu is available on the front panel (or on the TV screen), allowing you to easily

configure settings during playback.

Press OPTION.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRT UAL

FPR

SBL SB SBR

FPL

STEREO

TUNED

VOL .

Input Select

Front display

TV screen

Use the cursor keys to select an item and press ENTER.

Note

To return to the previous screen during menu operations, press RETURN.

Use the cursor keys (e/r) to select a setting.

To exit from the menu, press OPTION.

Option menu items

Note

▪ Available items vary depending on the selected input source.

▪ Text in parentheses denotes indicators on the front display.

▪ Default settings are underlined.

Item Function Page

Input Select (Input Select)

Switches the input source. p.38

Tone Control (

Tone Control)

Adjusts the level of high-frequency range and low-

frequency range individually.

p.38

DSP/Surround

(DSP/

Surround)

Program (PRG)

Select the sound programs and stereo playback. p.28

Sur.Decode

(SrDec)

Select which surround decoder is used when

Sur.Decode

is selected as the program.

p.30

DSP Level

(DSP Level)

Adjusts the sound field effect level. p.38

Adaptive DRC

(A.DRC)

Sets whether the dynamic range (from maximum to

minimum) is automatically adjusted when the volume

is adjusted.

p.38

Enhancer

(Enhancer)

Enables/disables Compressed Music Enhancer. p.38

Volume Trim

(Volume Trim)

Input Trim

(In.Trim)

Corrects volume differences between input sources. p.39

Subwoofer Trim

(SW.Trim)

Fine-adjusts the subwoofer volume. p.39

Lipsync (Lipsync)

Enables/disables the “Lipsync” setting in the “Setup”

menu.

p.39

Signal Info. (Signal Info.)

Displays information about the video/audio signal. p.39

Audio In (Audio In)

Combines the video jack of the selected input source

with an audio jack of others.

p.39

Video Out (Video Out)

Selects a video to be output with the selected audio

source.

p.40

FM Mode (FM Mode)

Switches between “Stereo” and “Mono” for FM radio

reception.

p.32

Preset (Preset)

Auto Preset

Automatically registers FM radio stations with strong

signals as presets.

p.33

Clear Preset

Clear radio stations registered to preset numbers. p.35

Traffic Program

(TrafficProgram)

(U.K. and Europe models only)

Automatically searches for a traffic information

station.

p.36

Input Select (Input Select)

Switches the input source. Press ENTER to switch to the selected input source.

Tone Control (Tone Control)

Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)

individually.

Choices

Treble (Treble), Bass (Bass)

Setting range

-6.0 dB to

0.0 dB to +6.0 dB (0.5 dB increments)

Note

▪ When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears.

▪ You can also adjust the tone with the front panel controls. Press TONE CONTROL to select “Treble” or

“Bass”, then press PROGRAM to make an adjustment.

▪ If you set an extreme value, sounds may not match those from other channels.

DSP/Surround (DSP/Surround)

Configures the sound field program and surround settings.

DSP Level (DSP Level)

Adjusts the sound field effect level.

Setting range

-6 dB to

0 dB to +3 dB (1 dB increments)

Adaptive DRC (A.DRC)

Sets whether the dynamic range (from maximum to minimum) is automatically

adjusted when the volume level is adjusted. When it is set to “On”, it is useful for

listening to playback at a low volume at night.

Settings

On (On) Automatically adjusts the dynamic range.

Off (Off) The dynamic range is not automatically adjusted.

If “On” is selected, the dynamic range becomes narrow at a low volume and wide

at a high volume.

Enhancer (Enhancer)

Enables/disables Compressed Music Enhancer (p.31).

Note

▪ This setting is applied separately to each input source.

▪ You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer

(p.31).

Settings

Off (Off) Disables Compressed Music Enhancer.

On (On) Enables Compressed Music Enhancer.

Default

TUNER: On (On)

Others: Off (Off)

Volume Trim (Volume Trim)

Fine-adjusts volume difference between input sources or subwoofer volume.

Input Trim (In.Trim)

Corrects volume differences between input sources. If you are bothered by volume

differences when switching between input sources, use this function to correct it.

Note

This setting is applied separately to each input source.

Setting range

-6.0 dB to

0.0 dB to +6.0 dB (0.5 dB increments)

Subwoofer Trim (SW.Trim)

Fine-adjusts the subwoofer volume.

Setting range

-6.0 dB to

0.0 dB to +6.0 dB (0.5 dB increments)

Lipsync (Lipsync)

Enables/disables the adjustment configured in “Lipsync” (p.49) in the “Setup” menu.

Note

This setting is applied separately to each input source.

Settings

Off (Off) Disables the “Lipsync” adjustment.

On (On) Enables the “Lipsync” adjustment.

Signal Info. (Signal Info.)

Displays information about the video/audio signal.

Choices

Format (FORMAT) Audio format of the input signal

Channel (CHANNEL)

The number of source channels in the input signal (front/surround/LFE)

For example, “3/2/0.1” means 3 front channels, 2 surround channels, and

LFE.

Sampling (SAMPLING) The number of samples per second of the input digital signal

Video In (VIDEO IN) Type and resolution of the input digital signal

Video Out

(VIDEO OUT

)

Type and resolution of the output digital signal

Note

To switch the information on the front display, press the cursor keys (q/w) repeatedly.

Audio In (Audio In)

Combines the video jack of the selected input source with an audio jack of others. For

example, use this function in the following cases.

• Connecting a playback device that supports HDMI video output, but not HDMI

audio output

Input sources

HDMI 1-4

Settigns

AUDIO 1-5

Setup procedure

See “Changing the combination of video/audio input jacks” (p.19).

Video Out (Video Out)

Selects a video to be output with the selected audio source. For example, you can

watch the video while listening to the radio.

Input sources

AUDIO 1-5, TUNER

Settings

Off(Off) Does not output video.

HDMI 1-4 Outputs video input through the corresponding video input jacks.

CONFIGURATIONS

Configuring various functions (Setup Menu)

You can configure the unit’s various function with the menu displayed on the TV

screen.

Note

Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out

operations while viewing the front display.

Press SETUP.

Use the cursor keys to select a menu and press ENTER.

Use the cursor keys to select an item and press ENTER.

Note

To return to the previous screen during menu operations, press RETURN.

Use the cursor keys (e/r) to select a setting and press ENTER.

To exit from the menu, press SETUP.

Setup menu items

Menu Item Function Page

Speaker

Configuration

Subwoofer

Selects whether or not a subwoofer is connected. p.44

Front

Selects the size of the front speakers. p.44

Center

Selects whether or not a center speaker is connected and its size. p.44

Surround

Selects whether or not surround speakers are connected and their size. p.45

Crossover

Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. p.45

Subwoofer Phase

Sets the phase of the subwoofer. p.45

Extra Bass

Enables/disables Extra Bass. p.45

Virtual CINEMA FRONT

Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT) configuration. p.45

Distance

Sets the distance between each speaker and listening position. p.46

Level

Adjusts the volume of each speaker. p.46

Equalizer

Adjusts the tone with an equalizer. p.46

Test Tone

Enables/disables the test tone output. p.46

HDMI

HDMI Control

Enables/disables HDMI Control. p.47

Audio Output

Enables/disables the audio output from a TV. p.47

4K Upscaling

Enables/disables the upscaling function. p.47

TV Audio Input

Selects an audio input jack of the unit to be used for TV audio input. p.47

Standby Sync

Selects whether to use HDMI control to link the standby behavior of the TV and the unit. p.48

ARC

Enables/disables ARC. p.48

SCENE

Enables/disables SCENE link playback. p.48

Sound

DSP Parameter

Panorama

Enables/disables the broadening effect of the front sound field. p.49

Center Width

Adjusts the broadening effect of the center sound field. p.49

Dimension

Adjusts the difference in level between the front and surround sound fields. p.49

Lipsync

Select

Selects the method to adjust the delay between video and audio output. p.49

Adjustment

Adjusts the delay between video and audio output manually. p.49

Dialogue Dialogue Level

Adjusts the volume of dialogue sounds. p.50

Volume

Scale

Switches the scale of the volume display. p.50

Dynamic Range

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. p.50

Max Volume

Sets the limit value of the volume. p.50

Initial Volume

Sets the initial volume for when this receiver is turned on. p.50

Menu Item Function Page

ECO

Auto Power Standby

Set the amount of time for the auto-standby function. p.51

ECO Mode

Enables/disables the eco mode (power saving mode). p.51

Function

Input Rename

Changes the input source name displayed on the front display. p.52

Input Skip

Set which input source is skipped when operating the INPUT key. p.53

Dimmer

Adjusts the brightness of the front display. p.53

Memory Guard

Prevents accidental changes to the settings. p.53

Remote Color Key

Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control. p.53

Language

Select an on-screen menu language. p.54

Speaker

Configures the speaker settings manually.

Note

Default settings are underlined.

Configuration

Configures the output characteristics of the speakers.

Note

When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your

speaker is 16 cm (6‑1/4”) or larger, or “Small

” if it is smaller than 16 cm (6‑1/4”).

Subwoofer

Selects whether or not a subwoofer is connected.

Settings

Use

Select this option when a subwoofer is connected.

The subwoofer will produce LFE (low-frequency effect) channel audio

and low-frequency components from other channels.

None

Select this option when no subwoofer is connected.

The front speakers will produce LFE (low-frequency effect) channel

audio and low-frequency components from other channels.

Front

Selects the size of the front speakers.

Settings

Small

Select this option for small speakers.

The subwoofer will produce front channel low-frequency components

(configurable in “

Crossover”).

Large

Select this option for large speakers.

The front speakers will produce all of the front channel frequency

components.

Note

“Front” is automatically set to “Large” when “Subwoofer” is set to “None”.

Center

Selects whether or not a center speaker is connected and its size.

Settings

Small

Select this option for small speakers.

The subwoofer or front speakers will produce center channel low-

frequency components (configurable in “

Crossover”).

Large

Select this option for large speakers.

The center speaker will produce all of the center channel frequency

components.

None

Select this option when no center speaker is connected.

The front speakers will produce center channel audio.

Surround

Selects whether or not surround speakers are connected and their sizes.

Settings

Small

Select this option for small speakers.

The subwoofer or front speakers will produce surround channel low-

frequency components (configurable in “

Crossover”).

Large

Select this option for large speakers.

The surround speakers will produce all of the surround channel

frequency components.

None

Select this option when no surround speakers are connected.

The front speakers will produce surround channel audio. Virtual

CINEMA DSP works when you select a sound program.

Crossover

Sets the lower limit of the low-frequency components that can be output from a

speaker whose size is set to “

Small”. A frequency sound lower than the specified

value will be produced from the subwoofer or front speakers.

Settings

40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz,

160 Hz, 200 Hz

Note

If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and

crossover frequency to maximum.

Subwoofer Phase

Sets the phase of the subwoofer. When the bass sound is lacking or unclear,

switch the subwoofer phase.

Settings

Normal Does not reverse the subwoofer phase.

Reverse Reverses the subwoofer phase.

Extra Bass

Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy

enhanced bass sounds, regardless of the size of the front speakers and the

presence or absence of the subwoofer.

Settings

Off Disables Extra Bass.

On Enables Extra Bass.

Note

You can also use BASS on the remote control to enable/disable Extra Bass (p.31).

Virtual CINEMA FRONT

Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT)

configuration.

Settings

Off Disables the front 5-channel speaker configuration.

On Enables the front 5-channel speaker configuration.

Note

▪ Select “On” only when utilizing the Virtual CINEMA FRONT configuration (p.13).

▪ This setting is not available when “Surround” is set to “None”.

Distance

Sets the distance between each speaker and listening position so that sounds from the

speakers reach the listening position at the same time. First, select the unit of distance

from “Meter” or “Feet”.

Choices

Front L, Front R, Center, Surround L, Surround R, Subwoofer

Setting range

0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments

Default

Front L, Front R, Subwoofer: 3.00 m (10.0 ft)

Center: 2.60 m (8.6 ft)

Others: 2.40 m (8.0 ft)

Level

Adjusts the volume of each speaker.

Choices

Front L, Front R, Center, Surround L, Surround R, Subwoofer

Setting range

-10.0 dB to +10.0 dB (0.5 dB increments)

Default

Front L, Front R, Subwoofer: 0.0 dB

Others: -1.0 dB

Equalizer

Adjusts the tone with an equalizer.

EQ Select

Selects the type of equalizer to be used.

Settings

GEQ

Select this option when you want to adjust the equalizer manually.

For details, see “Manual equalizer adjustment”.

Off Does not use the equalizer.

Manual equalizer adjustment

Set “EQ Select” to “GEQ”.

Use the cursor keys (q/w) to select “Channel” and the cursor

keys (e/r) to select the desired speaker channel.

Use the cursor keys (q/w) to select the desired band

(frequency) and the cursor keys (e/r) to adjust the gain.

Setting range

-6.0 dB to +6.0 dB

To exit from the menu, press SETUP.

Test Tone

Enables/disables the test tone output. Test tone output helps you to adjust the speaker

balance or equalizer while confirming its effect.

Settings

Off Does not output test tones.

Outputs test tones automatically when you adjust the speaker balance or

equalizer.

HDMI

Configures the HDMI settings.

Note

Default settings are underlined.

HDMI Control

Enables/disables HDMI Control (p.66).

Settings

Off Disables HDMI Control.

Enables HDMI Control.

Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”, and

“SCENE”.

Note

To use HDMI control, you need to perform the HDMI Control link setup (p.66) after connecting HDMI

Control-compatible devices.

Audio Output

Enables/disables the audio output from a TV connected to the HDMI OUT jack.

Settings

Off Disables the audio output from the TV.

On Enables the audio output from the TV.

Note

This setting is available only when “HDMI Control” is set to “Off”.

4K Upscaling

Enables/disables the upscaling function. When it is enabled, 1080p content is

displayed at 4K resolution.

Settings

Off Disables the upscaling function.

On Enables the upscaling function.

TV Audio Input

Selects an audio input jack of the unit to be used for TV audio input when “HDMI

Control” is set to “On”. The unit’s input source automatically switches to TV audio when

the TV input is switched to its built-in tuner.

Settings

AUDIO 1–5

Default

AUDIO4

Note

When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting an

external device because the input will be used for TV audio input.

Standby Sync

Select whether to use HDMI control to link the unit's standby mode to the TV's power

when “HDMI Control

” is set to “On”.

Settings

Off Does not set the unit to standby mode when the TV is turned off.

On Sets the unit to standby mode when the TV is turned off.

Auto

Sets the unit to standby mode when the TV is turned off only when the unit

is receiving TV audio or HDMI signals.

ARC

Enables/disables ARC (p.18) when “HDMI Control” is set to “On”.

Settings

Off Disables ARC.

On Enables ARC.

Note

You do not need to change this setting normally. In case noises are produced from the speakers connected

to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off”

and use the TV’s speakers.

SCENE

Enables/disable SCENE link playback when “HDMI Control” is set to “On”.

When SCENE link playback is enabled, HDMI Control-compatible devices connected

to the unit via HDMI automatically works as follows, with a scene selection.

• TV: turning on and displaying video from the playback device

• Playback device: starting playback

Choices (SCENE keys)

BD / DVD, TV, CD, RADIO

Settings

Off Disables SCENE link playback for the selected SCENE key.

On Enables SCENE link playback for the selected SCENE key.

Default

BD / DVD, TV: On

CD, RADIO: Off

Note

SCENE link playback may not work properly due to the compatibility between devices. We recommend using

TV and playback devices from the same manufacturer so that HDMI Control works more effectively.

Sound

Configures the audio output settings.

Note

Default settings are underlined.

DSP Parameter

Configures the surround decoder settings.

Panorama

Enables/disables the broadening effect of the front sound field. When this function

is enabled, you can wrap front left/right channel sounds around the sound field

and generate a spacious sound field in combination with the surround sound field.

This setting is effective when “

DPL Music” is selected.

Settings

Off Disables the broadening effect of the front sound field.

On Enables the broadening effect of the front sound field.

Center Width

Adjusts the broadening effect of the center sound field. Higher to enhance the

broadening effect, and lower to reduce it (closer to center). This setting is effective

when “DPL Music” is selected.

Setting range

0 to 3 to 7

Dimension

Adjusts the difference in level between the front and surround sound fields. Higher

to strengthen the front sound field and lower to strengthen the surround sound

field. This setting is effective when “

DPL Music” is selected.

Setting range

-3 to

0 to +3

Lipsync

Adjusts the delay between video and audio output.

Note

You can enable/disable the Lipsync function by input sources in “Lipsync (Lipsync)” (p.39) in the “Option”

menu.

Select

Selects the method to adjust the delay between video and audio output.

Setting range

Manual

Select this option when you want to adjust the delay between video

and audio output manually.

Adjust the audio output timing in “Adjustment”.

Auto

Adjusts the delay between video and audio output automatically when

a TV that supports an automatic lipsync function is connected to the

unit via HDMI.

If necessary, you can fine-adjust the audio output timing in

“Adjustment”.

Note

“Select” is automatically set to “Manual” depending on the TV connected to the unit.

Adjustment

Adjusts the delay between video and audio output manually when “Select” is set to

“Manual

”. You can fine-adjust the audio output timing when “Select” is set to

“Auto”.

Setting range

0 ms to 500 ms (1 ms increments)

Dialogue

Adjusts the volume of dialogue sounds.

Dialogue Level

Adjusts the volume of the center orientation sounds such as dialogue.

Setting range

0 to 3 (higher to strengthen)

Volume

Configures the volume settings.

Scale

Switches the scale of the volume display.

Settings

dB Displays the volume in the “dB” unit.

0-97 Displays the volume in the numeric value (0.5 to 97.0).

Dynamic Range

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital

and DTS signals) playback.

Settings

Maximum Produces audio without adjusting the dynamic range.

Standard Optimizes the dynamic range for regular home use.

Min/Auto

Sets the dynamic range for clear sound even at night or at low

volumes.

When playing back Dolby TrueHD signals, the dynamic range is

automatically adjusted based on the input signal information.

Max Volume

Sets the limit value of the volume.

Setting range

-30.0 dB to +15.0 dB (5.0 dB increments),

+16.5 dB [50.0 to 95.0 (5.0 increments),

97.0]

Initial Volume

Sets the initial volume when the receiver is turned on.

Settings

Off

Sets the level to the volume level of the unit when it last entered

standby mode.

Mute Sets the unit to mute the audio output.

-80.0 dB to +16.5 dB

(0.5 dB increments)

[0.5 to 97.0

(0.5 increments)]

Sets the level to the specified volume level.

ECO

Configures the power supply settings.

Note

Default settings are underlined.

Auto Power Standby

Set the amount of time for the auto-standby function.

Settings

Off Does not set the unit to standby mode automatically.

20 minutes

Sets the unit to standby mode when you have not operated the unit and

the unit has not detected any input signal for the specified time.

2 hours, 4 hours,

8 hours, 12 hours

Sets the unit to standby mode when you have not operated the unit for the

specified time.

Default

U.K. and Europe models: 20 minutes

Other models: Off

Note

Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front

display.

ECO Mode

You can reduce the unit’s power consumption by setting the eco mode to “On”. After

setting, be sure to press ENTER to restart the unit.

When the eco mode is enabled, you can reduce the unit’s power consumption.

Settings

Off Disables the eco mode.

On Enables the eco mode.

Note

▪ When “ECO Mode” is set to “On”, the front panel display may become dark.

▪ If you want to play audio at high volume, set “ECO Mode” to “Off”.

Function

Configures the functions that make the unit easier to use.

Note

Default settings are underlined.

Input Rename

Changes the input source name displayed on the front display. You can also select a

name created by the Auto Rename function.

Input sources

HDMI 1–4, AUDIO 1–5

Default

HDMI 1-4: Auto

Others: Manual

Procedure to rename automatically

Use the cursor keys (q/w) to select an input source to be

renamed.

Use the cursor keys (e/r) to select “Auto”.

The unit creates a name automatically according to the connected

device.

To change another input source, repeat steps 1 to 2.

To exit from the menu, press SETUP.

Note

During selecting “Auto”, the created name is saved even after the device connection is terminated. To

reset to the default setting, switch the setting to “Manual

” at once and then set it again to “Auto”.

Procedure to rename manually

Use the cursor keys (q/w) to select an input source to be

renamed.

Use the cursor keys (e/r) to select “Manual” and press

ENTER.

The edit screen is displayed.

Use the cursor keys and ENTER key to edit the name, and then

select “OK” and press ENTER.

Note

▪ To cancel the entry, select “CANCEL”.

▪ If you select "RESET", the default input name will be inserted into the editing area.

To change another input source name, repeat steps 1 to 4.

To exit from the menu, press SETUP.

Input Skip

Set which input source is skipped when operating the INPUT key.

You can select the desired input source quickly by using this function.

Input sources

HDMI 1–4, AUDIO 1–5, TUNER

Settings

Off Does not skip the selected input source.

On Skips the selected input source.

Dimmer

Adjusts the brightness of the front display.

Setting range

-4 to 0 (higher to brighten)

Note

The front display may become dark when “ECO Mode” (p.51) is set to “On”.

Memory Guard

Prevents accidental changes to the settings.

Settings

Off Does not protect the settings.

On Protects the settings until “Off” is selected.

Note

When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.

Remote Color Key

Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control.

Settings

Default

Assigns the functions of playback devices connected to the unit with an

HDMI cable.

Input

Assigns the unit's input sources to each key. The assigned input sources

can be set separately.

Input sources

HDMI 1-4, AUDIO 1-5, TUNER

Default

RED: HDMI2, GREEN: HDMI4, YELLOW: AUDIO3, BLUE: AUDIO5

Program

Assigns the functions of sound mode to each key.

RED: MOVIE

GREEN: MUSIC

YELLOW: STEREO

BLUE: SUR.DECODE

For example, if you press the RED key repeatedly, you can select your

favorite sound program from the sound programs (MOVIE

) (p.28) suitable

for the video source.

Language

Select an on-screen menu language.

Note

Default settings are underlined.

Settings

English English

日本語 Japanese

Français French

Deutsch German

Español Spanish

Русский Russian

Italiano Italian

中文 Chinese

Note

The information on the front display is provided in English only.

Configuring the system settings (ADVANCED SETUP menu)

Configure the system settings of the unit while viewing the front display.

Set the unit to standby mode.

While holding down STRAIGHT on the front panel, press

z (power).

(power)

STRAIGHTPROGRAM

Press PROGRAM to select an item.

Press STRAIGHT to select a setting.

Press z (power) to set the unit to standby mode and turn it on

again.

The new settings take effect.

ADVANCED SETUP menu items

Note

Default settings are underlined.

Item Function Page

REMOTE ID Selects the unit’s remote control ID. p.55

(Asia and General models only)

Changes the FM tuning frequency setting.

p.56

TV FORMAT Switches the video signal type of HDMI output. p.56

4K MODE Selects the HDMI 4K signal format. p.56

INIT Restores the default settings. p.57

VERSION Checks the version of firmware currently installed on the unit. p.57

Selecting the remote control ID (REMOTE ID)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

REMOTE ID••ID1

Change the unit’s remote control ID so that it matches the remote control’s ID (default:

ID1). When using multiple Yamaha AV receivers, you can set each remote control with

a unique remote control ID for its corresponding receiver.

Settings

ID1, ID2

Changing the remote control ID of the remote control

To select ID1, while holding down the cursor key (e), hold down

SCENE (BD/DVD) for more than 3 seconds.

To select ID2, while holding down the cursor key (e), hold down

SCENE (TV) for more than 3 seconds.

Changing the FM tuning frequency setting (TU)

(Asia and General models only)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

TU••••••••FM50

Change the FM tuning frequency setting of the unit depending on your country or

region.

Settings

FM100 Select this when you want to adjust the FM frequency by 100-kHz steps.

FM50 Select this when you want to adjust the FM frequency by 50-kHz steps.

Switching the video signal type (TV FORMAT)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

TV FORMAT•NTSC

Switch the video signal type of HDMI output so that it matches to the format of your TV.

Since the unit automatically selects the video signal type so that it matches to the TV, it

is unnecessary to change the setting normally. Change the setting only when images

on the TV screen do not appear correctly.

Settings

NTSC, PAL

Default

Canada and General models: NTSC

Other models: PAL

Selecting the HDMI 4K signal format (4K MODE)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

4K MODE•MODE 1

Selects the format of signals input/output at the unit when HDMI 4K compatible TV and

playback device are connected to the unit.

Settings

MODE 1

Inputs/outputs 4K signals shown in the table below. Depending on the

connected device or HDMI cables, video may not be displayed correctly.

In this case, select “MODE 2”.

MODE 2 Inputs/outputs 4K signals shown in the table below.

Note

When “MODE 1” is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with

Ethernet.

Format

MODE 1 MODE 2

8 bit 10 bit 12 bit 8 bit 10 bit 12 bit

4K/60, 50 Hz

RGB 4:4:4

– –

YCbCr 4:4:4

– –

YCbCr 4:2:2

–

YCbCr 4:2:0

4 4

–

4K/30, 25, 24 Hz

RGB 4:4:4

4 4

–

YCbCr 4:4:4

4 4

–

YCbCr 4:2:2

4 4

Restoring the default settings (INIT)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

INIT••••CANCEL

Restores the default settings for the unit.

Choices

ALL Restores the default settings for the unit.

CANCEL Does not perform an initialization.

Checking the firmware version (VERSION)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

VERSION••xx.xx

Check the version of firmware currently installed on the unit.

Note

It may take a while until the firmware version is displayed.

APPENDIX

Frequently asked questions

The frequently asked questions from customers and the answers are shown below.

The new speaker system does not provide an ideal sound balance...

If you have changed speakers or have a new speaker system, reconfigure the speaker

settings in “Speaker” in the “Setup” menu.

We want to set limitations on the volume control...

If someone accidentally operates the controls on the main unit or remote control, the

volume may suddenly increase. This may also cause injury or damage the unit or

speakers. We recommend using “Max Volume

” in the “Setup” menu to set the

maximum volume level for the unit in advance (p.50).

I want to fix the volume when turning on the unit...

By default, the volume level when the unit last entered standby mode is automatically

applied. If you want to fix the volume, use “

Initial Volume” in the “Setup” menu to set

the volume to be applied when the receiver is turned on (p.50).

The volume varies depending on the input sources...

You can correct volume differences between input sources by utilizing “Input Trim” in

the “

Option” menu (p.39).

HDMI Control does not work at all...

To use HDMI Control, you need to perform the HDMI Control link setup (p.66). After

connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit,

enable HDMI Control on each device and perform the HDMI Control link setup. This

setup is required every time you add a new HDMI Control-compatible device to your

system. For information on how HDMI Control works between your TV and playback

devices, refer to the instruction manuals for each device.

I want to change the input source name...

By default, input source names (such as “HDMI1”) are displayed on the front display

when an input source is selected. If you want to rename them as you like, use

“Input

Rename” (p.52) in the “Setup” menu.

I want to prevent accidental changes to the settings...

You can protect the settings configured on the unit (such as speaker settings) by

utilizing “

Memory Guard” in the “Setup” menu (p.53).

The unit’s remote control is simultaneously controlling another Yamaha

product as well as the unit...

When using multiple Yamaha products, the remote control may work on another

Yamaha product or another remote control may work on the unit. If this happens,

remote control (p.55).

The combination of video/audio input jacks does not match an external

device...

Use “Audio In” in the “Option” menu to change the combination of video/audio input

jacks so that it matches the output jack(s) of your external device (

p.19).

Video and audio are not synchronized...

Use “Lipsync” in the “Setup” menu to adjust the delay between video and audio output

(p.49).

I want to hear audio from the TV speakers...

Use “Audio Output” in the “Setup” menu to enable audio output from the TV speakers

(p.47).

I want to change the on-screen menu language...

Use “Language” in the “Setup” menu to select a language from English, Japanese,

French, German, Spanish, Russian, Italian and Chinese (

p.22).

Troubleshooting

Refer to the table below when the unit does not function properly.

If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized

Yamaha dealer or service center.

First, check the following:

The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely.

The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on.

The connectors of each cable are securely inserted in to jacks on each device.

Power, system and remote control

Problem Cause Remedy

The power does not turn on.

The protection circuitry has been activated three times

consecutively.

As a safety precaution, capability to turn on the power is disabled. Contact your

nearest Yamaha dealer or service center to request repair.

The power does not turn off.

The internal microcomputer has frozen, due to an external electric

shock (such as lightning or excessive static electricity) or to a drop

in the power supply voltage.

Hold down z (power) on the front panel for more than 15 seconds to reboot the

unit. (If the problem persists, disconnect the power cable from the AC wall outlet

and plug it again.)

The power turns off (standby mode) immediately.

The unit was turned on while a speaker cable was shorted.

Twist the bare wires of each speaker cable firmly and reconnect to the unit and

speakers (

p.16).

The unit enters standby mode automatically.

The sleep timer worked. Turn on the unit and start playback again.

The auto-standby function activated because the unit was not used

for the specified time.

To disable the auto-standby function, set “Auto Power Standby” in the “Setup”

menu to “Off

” (p.51).

The protection circuitry has been activated because of a short

circuit.

Twist the bare wires of each speaker cable firmly and reconnect to the unit and

speakers (p.

16).

The unit is not reacting.

The internal microcomputer is frozen, due to an external electric

shock (such as lightning or excessive static electricity) or to a drop

in the power supply voltage.

Hold down z (power) on the front panel for more than 15 seconds to reboot the

unit. (If the problem persists, disconnect the power cable from the AC wall outlet

and plug it again.)

Problem Cause Remedy

The unit cannot be controlled using the remote

control.

The unit is out of the operating range. Use the remote control within the operating range (p.4).

The batteries are weak. Replace with new batteries.

The unit’s remote control sensor is exposed to direct sunlight or

strong lighting.

Adjust the lighting angle, or reposition the unit.

The remote control IDs of the unit and the remote control are not

identical.

Change the remote control ID of the unit or the remote control (p.55).

Cannot select the desired input source even if

“INPUT” is pressed.

The function which skips some input sources is set. Set “Input Skip” of the desired input source in the “Setup” menu to “Off” (p.53).

The RED/GREEN/YELLOW/BLUE keys of the

remote control do not operate.

The device which is connected to the unit via HDMI does not

support the operation of the RED/GREEN/

YELLOW/BLUE keys.

Use a device which supports the operation of the RED/GREEN/YELLOW/BLUE

keys.

The settings of the RED/GREEN/YELLOW/BLUE keys of the unit's

remote control have been changed.

Set the “Remote Color Key” settings in the “Setup” menu to “Default” (p.53).

Audio

Problem Cause Remedy

No sound.

Another input source is selected. Select an appropriate input source with the input selection keys.

Signals that the unit cannot reproduce are being input.

Some digital audio formats cannot be played back on the unit. To check the

audio format of the input signal, use “Signal Info.” in the “Option” menu (

p.39).

The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.

The volume cannot be increased.

The maximum volume is set. Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.50).

A device connected to the output jacks of the unit is not turned on. Turn on all devices connected to the output jacks of the unit.

No sound is coming from a specific speaker.

The playback source does not contain a signal for the channel. To check it, use “Signal Info.” in the “Option” menu (p.39).

The currently selected sound program/decoder does not use the

speaker.

To check it, select “5ch Stereo” (p.27).

Audio output of the speaker is disabled. Use “Configuration” in the “Setup” menu to change the speaker settings (p.44).

The volume of the speaker is set too low. Use “Level” in the “Setup” menu to adjust the speaker volume (p.46).

The speaker cable connecting the unit and the speaker is

defective.

If there is no problem with the connection, replace with another speaker cable.

The speaker is malfunctioning.

To check it, replace with another speaker. If the problem persists, the unit may be

malfunctioning.

Problem Cause Remedy

No sound is coming from the subwoofer.

The playback source does not contain Low Frequency Effect (LFE)

or low-frequency signals.

To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the

front channel low-frequency components from the subwoofer (

p.45).

Subwoofer output is disabled. Set “Subwoofer” in the “Setup” menu to “Use” (p.44).

The volume of the subwoofer is too low. Adjust the volume on the subwoofer.

The subwoofer has been turned off by its auto-standby function. Disable the auto-standby function of the subwoofer or adjust its sensitivity level.

No sound from the playback device (connected to

the unit with HDMI).

The TV does not support HDCP (High-bandwidth Digital Content

Protection).

Refer to the instruction manuals for the TV and check the TV’s specifications.

The number of devices connected to the HDMI OUT jack exceeds

the limit.

Disconnect some of the HDMI devices.

No sound from the TV (when HDMI Control is

used).

The TV is set to output audio from the TV speakers.

Change the audio output setting on your TV so that the TV audio is output from

the speakers connected to the unit.

A TV that does not support ARC is connected to the unit only with

an HDMI cable.

Use a digital optical cable to make an audio connection (p.18).

(If the TV is connected to the unit with an audio cable)

The TV audio input setting does not match the actual connection.

Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack

(p.47).

(If you are trying to use ARC)

ARC is disabled on the unit or TV.

Set “ARC” in the “Setup” menu to “On” (p.48). Also, enable ARC on the TV.

When playing back DSD audio, the unit disables

the audio output from a TV.

The unit does not support DSD audio output from a TV. Change the audio output setting on the playback device to PCM.

Only the front speakers work on multichannel

audio.

The playback device is set to output 2-channel audio (such as

PCM) only.

To check it, use “Signal Info.” in the “Option” menu (p.39). If necessary, change

the digital audio output setting on the playback device.

Noise/hum is heard.

The unit is too close to another digital or radio frequency device. Move the unit further away from the device.

The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.

The sound is distorted.

The volume of the unit is too high.

Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to

“Off

” (p.51).

A device connected to the unit’s output jacks is not turned on. Turn on all devices connected to the unit’s output jacks.

Video

Problem Cause Remedy

No video.

Another input source is selected on the unit. Select an appropriate input source with the input selection keys.

Another input source is selected on the TV. Switch the TV input to display the video from the unit.

The video signal output from the unit is not supported by the TV.

Check the video output setting of the playback device. For information about

video signals supported by the TV, refer to the instruction manuals for the TV.

The cable connecting the unit and TV (or playback device) is

defective.

If there is no problem with the connection, replace with another cable.

No video from the playback device (connected to

the unit with HDMI).

The input video signal (resolution) is not supported by the unit.

To check the information about the current video signal (resolution), use “Signal

Info.

” in the “Option” menu (p.39). For information about video signals supported

by the unit, see “HDMI signal compatibility” (p.68).

The TV does not support HDCP (High-bandwidth Digital Content

Protection).

Refer to the instruction manuals for the TV and check the TV’s specifications.

The number of devices connected to the HDMI OUT jack is over

the limit.

Disconnect some of the HDMI devices.

No image (contents required the HDCP 2.2 -

compatible HDMI device) from the playback

device connected to the unit with HDMI.

The TV (HDMI input jack) does not support HDCP 2.2. (The

Warning message can be displayed on the TV screen.)

Connect the unit to the TV (HDMI input jack) that supports HDCP 2.2.

The menu of the unit is not displayed on the TV.

The TV is not connected to the unit via HDMI.

You can display the menu of the unit on the TV only when they are connected

with an HDMI cable. If necessary, use an HDMI cable to connect them (

p.18 to

p.18).

Another input source is selected on the TV. Switch the TV input to display the video from the unit (HDMI OUT jack).

FM radio

Problem Cause Remedy

FM radio reception is weak or noisy.

There is multi-path interference. Adjust the FM antenna height or orientation, or place it in a different location.

Your area is too far from the FM station transmitter.

To select monaural FM radio reception “FM Mode” in the “Option” menu to

“

Mono” (p.32).

Use an outdoor FM antenna.

Radio stations cannot be selected automatically.

Your area is too far from the FM station transmitter.

Select the station manually (p.32).

Use an outdoor antenna. We recommend using a sensitive multi-element

antenna.

Error indications on the front display

Refer to the table below when the error message is indicated on the front display.

Message Cause Remedy

Check SP Wires

The speaker cables short circuit. Twist the bare wires of the cables firmly and connect to the unit and speakers properly.

Internal Error

An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center.

RemID Mismatch

The remote control IDs of the unit and the remote control are not

identical.

Change the remote control ID of the unit or the remote control (p.55).

Glossary

This is a glossary of the technical terms used in this manual.

Audio information

Audio decoding format

Dolby Digital

Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that

supports 5.1-channel audio. This technology is used for audio on most DVD disc.

Dolby Pro Logic II

Dolby Pro Logic II enables 5-channel playback from 2-channel sources. There are three modes

available: “Music mode” for music sources, “Movie mode” for movie sources, and “Game mode”

for game sources.

DTS Digital Surround

DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports

5.1-channel audio. This technology is used for audio on most DVD discs.

DSD (Direct Stream Digital)

DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as

SACD (Super Audio CDs). The signals are stored at a high-frequency sampling rate of 2.8224

MHz. The highest frequency response is equal to or higher than 100 kHz, with a dynamic range of

120 dB. This technology offers better audio quality than that used for CDs.

Others

LFE (Low Frequency Effects) 0.1 channel

This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to

120 Hz. This channel is added to the channels for all bands with Dolby Digital or DTS to enhance

low frequency audio effects. This channel is labeled 0.1 because it is limited to only low frequency

audio.

Lip sync

Video output sometimes lags behind audio output due to the complexity of signal processing

caused by an increase in video signal capacity. Lip sync is a technique for automatically

correcting the timing lag between audio and video output.

HDMI and video information

Deep Color

Deep Color is a technology that HDMI specification supports. Deep Color increases the number of

available colors within the boundaries defined by the RGB or YCbCr color space. Conventional

color systems process the color using 8 bits. Deep Color processes the color with 10, 12, or 16

bits. This technology allows HDTVs and other displays to increase from millions of colors to

billions of colors and eliminate on-screen color banding for smooth tonal transitions and subtle

gradations between colors.

HDMI

HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/

video signal transmission. This interface transmits both digital audio and digital video signals

using a single cable without any loss. HDMI complies with HDCP (High-bandwidth Digital Content

Protection) and provides a secure audio/video interface. For further information on HDMI, visit the

HDMI website at “http://www.hdmi.org/”

x.v.Color

“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color

space than sRGB and allows the expression of colors that were not hitherto possible. While

remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color

space, and thus can produce more vivid, natural images.

Yamaha technologies

CINEMA DSP (Digital Sound Field Processor)

Since the surround sound systems were originally designed for use in movie theaters, their effect

is best experienced in a theater that has many speakers designed for acoustic effects. Since

home conditions (such as room size, wall material, and number of speakers) can differ so widely,

it is inevitable that there are differences in the sound that you hear. Based on a wealth of actually

measured data, CINEMA DSP, Yamaha’s original DSP technology provides the audiovisual

experience of a movie theater in your own home.

Compressed Music Enhancer

The Compressed Music Enhancer feature compensates for missing harmonics in compression

music formats (such as MP3). As a result, this technology provides improved performance for the

overall sound system.

SILENT CINEMA

Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones.

Parameters for headphones have been set for each sound program, so that accurate

representations of all the sound programs can be enjoyed on headphones.

Virtual CINEMA DSP

Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround

speakers with front left and right speakers. Even if the surround speakers are not connected, the

unit creates the realistic sound field in a listening room.

Virtual CINEMA FRONT

Virtual CINEMA FRONT allows the system to virtually reproduce the sound field of the surround

speakers with front surround speakers. Even if the surround speakers placed in the front, the unit

creates the realistic sound field in a listening room.

Information on HDMI

The additional information on HDMI is as follows.

HDMI Control

HDMI Control allows you to operate external devices via HDMI. If you connect a TV

that supports HDMI Control to the unit with an HDMI cable, you can control the unit

(such as power and volume) with TV remote control operations. You can also control

playback devices (such as HDMI Control-compatible BD/DVD players) connected to

the unit with an HDMI cable.

Operations available from the TV’s remote control

• Standby synchronization

• Volume control including mute

• Switching to input audio from the TV when the TV input is switched to its built-in

tuner

• Switching to input video/audio from the selected playback device

• Switching between audio output devices (the unit or TV speaker)

(Example)

HDMI Control HDMI Control

The unit turns off

(standby)

Playback device

also turns off

Turn off the TV

Operations available from the unit’s remote control

• Starting playback on the playback device and turning on the TV with a scene

selection (

p.26)

• Switching the TV input to display the “Setup” menu (when SETUP is pressed)

• Controlling the playback device (playback and menu operations)

(Example)

HDMI Control HDMI Control

Press SCENE (BD/DVD)

Playback starts

Turns on and displays

video from the playback

device

To use HDMI Control, you need to perform the following HDMI Control link setup after

connecting the TV and playback devices.

For details on settings and operating your TV, refer to the instruction manual for the TV.

Note

This setup is required every time you add a new HDMI Control-compatible device to your system.

Turn on the unit, TV, and playback devices.

Configure the settings of the unit.

Switch the TV input to display video from the unit.

Press SETUP.

MUTE

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

TUNING

MUTE

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

PRESET

VOLUME

PROGR AM

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

BLUE

YELLOWGREEN

RED

MUT

P MENU

HOME

POP-UP/MENU

DISPLA

DISPLADISPLA

DISPLA

DISPLADISPLA

DISPLA

RETURN

RETURNRETURN

RETURN

OPTION

SETUP

ENTER

Cursor keys

Use the cursor keys to select “HDMI” and press ENTER.

Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys

(e/r) to select “On” as shown below.

If you made a digital optical cable connection between the TV and the

unit, use the cursor keys (q/w) to select “TV Audio Input” and the

cursor keys (e/r) to select “AUDIO1”.

Press SETUP.

Enable HDMI Control on the TV and playback devices (such as

HDMI Control-compatible BD/DVD players).

Turn off the main power of the TV and then turn off the unit and

playback devices.

Turn on the unit and playback devices and then turn on the TV.

Switch the TV input to display the video from the unit.

Check the followings.

On the unit: The input to which the playback device is connected is

selected. If not, select the input source manually.

On the TV: The video from the playback device is displayed.

Check that the unit is properly synchronized with the TV by

turning off the TV or adjusting the TV volume with the TV remote

control.

Note

▪ If HDMI Control does not work properly, the problem may be solved by turning the playback device off and

on again, or by unplugging the power plug and plugging it in again. Also, HDMI Control may not work

properly if the number of connected devices exceeds the limit. In this case, disable HDMI Control on

devices not in use.

▪ If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting

on the TV.

▪ If you reconnect the HDMI cable, perform the procedure 5-8 again.

▪ We recommend using TV and playback devices from the same manufacturer so that HDMI Control works

more effectively.

Audio Return Channel (ARC)

ARC allows you to input TV audio to the unit with the HDMI cable which transmits video

signal to the TV.

Check the following after the HDMI Control settings.

Select a TV program with the TV remote control.

Check that the input source of the unit will be automatically

switched to “AUDIO4” and the TV audio will be played back on the

unit.

If you cannot hear the TV audio, check the following:

▪ “ARC” (p.48) in the “Setup” menu is set to “On”.

▪ The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI

jack marked “ARC”) on the TV.

Some HDMI jack on the TV is not compatible with ARC. For details, refer

to the instruction manual for the TV.

Note

▪ If the audio is interrupted while using ARC, set “ARC” (p.48) in the “Setup” menu to “Off” and use a digital

optical cable to input TV audio to the unit (

p.18).

▪ When using ARC, connect a TV with an HDMI cable that supports ARC.

▪ “AUDIO4” is set as TV audio input at the factory. If you have connected any external device to the AUDIO

4 jacks, use

“TV Audio Input” (p.47) in the “Setup” menu to change the TV audio input assignment. To use

the SCENE function (p.26), you also need to change the input assignment for SCENE (TV).

HDMI signal compatibility

• When CPPM copy-protected DVD-Audio is played back, video/audio signals may

not be output, depending on the type of the DVD player.

• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For

details, refer to the instruction manual for each device.

• To decode audio bitstream signals on the unit, set the input source device

appropriately so that the device outputs the bitstream audio signals directly (does

not decode the bitstream signals on the playback device). For details, refer to the

instruction manual for the playback device.

Trademarks

The trademarks used in this manual are as follows.

Manufactured under license from Dolby Laboratories. Dolby,

Pro Logic, and the double-D symbol are trademarks of Dolby

Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured

under license from DTS Licensing Limited. DTS, the Symbol, &

DTS and the Symbol together are registered trademarks, and

The terms HDMI, the HDMI Logo, and High-Definition

Multimedia Interface are trademarks or registered trademarks

of HDMI Licensing LLC in the United States and other

countries.

x.v.Color™

“x.v.Color” is a trademark of Sony Corporation.

App Store is a service mark of Apple Inc.

Android™ is a trademark of Google Inc.

“SILENT CINEMA” is a trademark of Yamaha Corporation.

Google Noto Fonts

This product uses the following fonts.

(https://www.google.com/get/noto/#sans-lgc

), with Reserved

Font Name Noto Sans Version 1.004.

(https://www.google.com/get/noto/help/cjk/), with Reserved

Font Name Noto Sans CJK Version 1.004.

This Font Software is licensed under the SIL Open Font

License, Version1.1.

This license is available with a FAQ at:

http://scripts.sil.org/OFL

Specifications

The specifications of this unit are as follows.

Input jacks

Analog Audio

• Audio x 2

Digital Audio (Supported frequencies: 32 kHz to 96 kHz)

• Optical x 1

• Coaxial x 2

HDMI Input

• HDMI x 4

Output jacks

Analog Audio

• Speaker Out x 6 (FRONT L/R, CENTER, SURROUND L/R, SUBWOOFER)

• Subwoofer Pre Out

• Headphone x 1

HDMI Output

• HDMI OUT x 1

HDMI

HDMI Features:

• 4K UltraHD Video (include 4K/60, 50Hz 10/12bit), 3D Video, ARC (Audio Return Channel), HDMI

Control (CEC), Auto Lip Sync, Deep Color, “x.v.Color”, 21:9 Aspect Ratio, BT.2020 Colorimetry,

HDR Compatible

Video Format (Repeater Mode)

• VGA

• 480i/60 Hz

• 576i/50 Hz

• 480p/60 Hz

• 576p/50 Hz

• 720p/60 Hz, 50 Hz

• 1080i/60 Hz, 50 Hz

• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz

• 4K/60Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz

Audio Format

• Dolby Digital Plus

• Dolby Digital

• DTS

• DSD 2-ch to 6-ch

• PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)

Content Protection: HDCP 2.2 compatible

Link Function: CEC supported

TUNER

Analog Tuner

• FM x 1 (TUNER)

Compatible Decoding Formats

Decoding Format

• Dolby Digital Plus

• Dolby Digital

• DTS

Post Decoding Format

• Dolby Pro Logic

• Dolby Pro Logic II Music, Dolby Pro Logic II Movie, Dolby Pro Logic II Game

Audio Section

Rated Output Power (2-channel driven)

• (20 Hz to 20 kHz, 0.09% THD, 6 Ω)

– Front L/R 70 W+70 W

• [Canada model]

(1 kHz, 0.9% THD, 6 Ω)

– Front L/R 85 W+85 W

– Center 85 W

– Surround L/R 85 W+85 W

(50Hz, 0.9% THD, 6 Ω)

– Subwoofer 15 W

Rated Output Power (1-channel driven)

• (1 kHz, 0.9% THD, 6 Ω)

– Front L/R 100 W/ch

– Center 100 W/ch

– Surround L/R 100 W/ch

• (50Hz, 0.9% THD, 6 Ω)

– Subwoofer 15 W

Maximum Effective Output Power (1-channel driven)

• [Canada model] (1 kHz, 10% THD, 6 Ω)

– Front L/R, Center, Surround L/R, Subwoofer 145 W/ch

• [Other models] (1 kHz, 10% THD, 6 Ω)

– Front L/R, Center, Surround L/R, Subwoofer 135 W/ch

Dynamic Power (IHF)

• [Canada model]

– Front L/R (8/6/4/2 Ω)

110/130/160/180 W

• [Other models]

– Front L/R (6/4/2 Ω)

110/130/150 W

Damping Factor

• Front L/R, 20 Hz to 20 kHz, 8 Ω

100 or more

Input Sensitivity / Input Impedance

• AUDIO 4 etc. (1 kHz, 100 W/6 Ω) 200 mV/47 kΩ

Maximum Input Signal

• AUDIO 4 etc. (1 kHz, 0.5% THD, Effect On) 2.3 V

Output Level / Output Impedance

• SUBWOOFER

1 V/1.2 kΩ

Headphone Jack Rated Output / Impedance

• AUDIO 4 etc. (1 kHz, 50 mV, 8 Ω) 100 mV/470 Ω

Frequency Response

• AUDIO 4 etc. to Front (10 Hz to 100 kHz) +0/-3 dB

Signal to Noise Ratio (IHF-A Network)

• AUDIO 4 etc. (Input 1 kΩ Shorted, Speaker Out)

110 dB or more

Residual Noise (IHF-A Network)

• Front L/R (Speaker Out) 150 μV or less

Channel Separation

• AUDIO 4 etc. (Input 1 kΩ Shorted, 1 kHz/10 kHz)

70 dB/50 dB or more

Volume Control

• Range MUTE, -80 dB to +16.5 dB

• Step 0.5 dB

Tone Control Characteristics

• Bass Boost/Cut ±6 dB/0.5 dB Step at 50 Hz

• Bass Turnover 350 Hz

• Treble Boost/Cut ±6 dB/0.5 dB Step at 20 kHz

• Treble Turnover 3.5 kHz

Filter Characteristics

(fc=40/60/80/90/100/110/120/160/200 Hz)

• H.P.F. (Front, Center, Surround) 12 dB/oct.

• L.P.F. (Subwoofer) 24 dB/oct.

FM Section

Tuning Range

• [Canada model] 87.5 MHz to 107.9 MHz

• [Asia model] 87.5/87.50 MHz to 108.0/108.00 MHz

• [U.K. and Europe models] 87.50 MHz to 108.00 MHz

• [Other models] 87.50 MHz to 108.00 MHz

50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)

• Mono 3 μV (20.8 dBf)

Signal to Noise Ratio (IHF)

• Mono 65 dB

• Stereo 64 dB

Harmonic Distortion (IHF, 1 kHz)

• Mono 0.5%

• Stereo 0.6%

Antenna Input

75 Ω unbalanced

General

Power Supply

• [Canada model] AC 120 V, 60 Hz

• [China model] AC 220 V, 50 Hz

• [Australia model] AC 240 V, 50 Hz

• [U.K. and Europe models] AC 230 V, 50 Hz

• [Asia model] AC 220 to 240 V, 50/60 Hz

Power Consumption

240 W

Standby Power Consumption

• HDMI Control Off 0.4 W

• HDMI Control On (No Signals) 1.0 W

Dimensions (W x H x D)

435 x 151 x 315 mm (17-1/8” x 6” x 12-3/8”)

Weight

7.4 kg (16.3 lbs)

* The contents of this manual apply to the latest specifications as of the publishing date. To obtain

the latest manual, access the Yamaha website then download the manual file.

Yamaha Global Site

http://www.yamaha.com/

Yamaha Downloads

http://download.yamaha.com/

Manual Development Group

Published 01/2017 NV-A0

YJ184A0/EN

Yamaha HTR-2071 El manual del propietario

Marca: Yamaha

Modelo: HTR-2071

Categoría: Receptores AV

Tipo: El manual del propietario

Descargar PDF

informe

En otros idiomas

français: Yamaha HTR-2071 Le manuel du propriétaire
italiano: Yamaha HTR-2071 Manuale del proprietario
English: Yamaha HTR-2071 Owner's manual
Deutsch: Yamaha HTR-2071 Bedienungsanleitung
русский: Yamaha HTR-2071 Инструкция по применению
Nederlands: Yamaha HTR-2071 de handleiding
português: Yamaha HTR-2071 Manual do proprietário
dansk: Yamaha HTR-2071 Brugervejledning
svenska: Yamaha HTR-2071 Bruksanvisning
Türkçe: Yamaha HTR-2071 El kitabı
suomi: Yamaha HTR-2071 Omistajan opas

Documentos relacionados

Otros documentos

Sencor SBL2204RD Manual de usuario