AEG Electrolux ERO2923 Manual de usuario

Categoría
Congeladores
Tipo
Manual de usuario
f r i gorifico - congelador - fridge - freezer
LIBRO DE INSTRUCCIONES
INSTRUCTION BOOK
2223 403-51
ERO 2923
E
GB
ELECTROLUX HOME PRODUCTS OPERATIONS EUROPE
2
ADVERTENCIAS Y CONSEJOS IMPORTANTES
Es muy importante conservar este libro de instrucciones junto al aparato por si fuera necesario
consultarlo. Si el aparato se vendiese o transfiriese a otra persona, acuérdese de entregarlo junto con
él para que el nuevo propietario conozca el funcionamiento de la máquina y sus advertencias.
En caso de que este aparato, dotado de cierre magnético, sustituya uno con cierre automático,
aconsejamos que la cerradura de este último quede inservible, antes de deshacerse de él. Así se
evitará que los niños, jugando, puedan quedarse encerrados dentro, con grave peligro de sus vidas.
Estas advertencias han sido redactadas para su seguridad y para la seguridad de los demás. Le
rogamos, por lo tanto, leerlas atentamente antes de instalar y utilizar el aparato.
Seguridad
Desenchufar el aparato antes de efectuar
cualquier operación de limpieza y mantenimiento
(como la sustitución de la bombilla de
iluminación en los aparatos que la poseen).
Este aparato ha sido proyectado para ser usado
por adultos. Por lo tanto, tener cuidado que los
niños no se acerquen para jugar con él.
Es peligroso modificar o intentar modificar las
características de este aparato.
Quitar siempre el enchufe de la toma de corriente
antes de efectuar cualquier operación de limpieza
o manutención (como la substitución de la
bombilla en aquellos aparatos que la tienen).
No consumir nunca los cubitos de hielo recién
sacados del congelador ya que podrían provocar
quemaduras.
Estos aparatos son pesados. Tener cuidado en
los desplazamientos.
Este aparato contiene hidrocarburos en el circuito
refrigerante; por lo tanto el mantenimiento y la
recarga deben ser efetuados exclusivamente por
personal autorizado de la empresa.
Este aparato no contiene en el circuito refrige-
rante y en el aislamiento, gases refrigerantes
nocivos para el ozono. El aparato no debe ser
eliminado junto con los deshechos urbanos y
chatarras. Se debe evitar el daño del circiuto
refrigerante, sobre todo en la parte posterior
cerca del intercambiador.
Las informaciones sobre los centros de
recepción son suministradas por las
autoridades municipales.
Prestar la máxima atención durante las
operaciones de desplazamiento para no
dañar las partes del circuito refrigerante a fin
de evitar las posibles salidas de líquido.
El aparato no debe ser colocado cerca de
termosifones o cocinas a gas.
Evitar la exposición prolongada del aparato a
los rayos solares.
La parte posterior del aparato debe recibir
una circulación de aire suficiente y se debe
evitar cualquier daño al circuito refrigerante.
Solamente para los congeladores (excluidos
los empotrados): su mejor ubicación es el
sótano.
Asistencia
Cualquier modificación que eventualmente fuese
necesaria a la instalación eléctrica doméstica
para poder instalar el aparato tiene que ser
realizada sólo por personal competente.
Para eventuales intervenciones dirigirse a un
Centro de Asistencia Técnica autorizado y exigir
las piezas de repuesto originales.
En caso de necesitar reparaciones no intentar
hacerlas personalmente. Las reparaciones
efectuadas por personas no competentes
pueden provocar daños. Ponerse en contacto
con el Centro de Asistencia más cercano y
emplear sólo repuestos originales.
Uso
Los frigoríficos y/o congeladores domésticos
están destinados sólo a la conservación y/o
congelación de alimentos.
Las mejores prestaciones se obtienen con
temperaturas ambiente comprendidas entre
+18°C y +43°C (Clase T); +18°C y +38°C (Clase
ST); +16°C y +32°C (Clase N); +10°C y +32°C
(Clase SN); la clase de pertenencia está indicada
en la placa matrícula situada en la cámara al
lado del cajón verduras.
Atención: en caso de temperaturas ambiente
diferentes de las indicadas para la clase climática
a la cual pertenece este producto, es preciso
observar las indicaciones siguientes: cuando la
temperatura ambiente desciende por debajo del
valor mínimo puede suceder que la temperatura
de conservación en el vano congelador no esté
garantizada; por lo tanto, se aconseja que se
consuman a lo más pronto los alimentos
presentes en su interior.
Los productos que hayan sido descongelados no
se tienen que volver a congelar
23
PR01
540
50
3
2
1
50 mm
min.
200 cm
2
200 cm
2
min.
D567
Dimensions of housing
Height (1) 1780 mm
Depth (2) 550 mm
Width (3) 560 mm
For safety reasons, minimum ventilation must be as
shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
INDICE
Advertencias y consejos importantes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Uso - Limpieza de las partes internas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Uso - Puesta en marcha aparado - Regulación de la temperatura - Congelación de los alimentos . . . . .
frescos - Conservación de los alimentos congelados - Cubitos de hielo - Descongelación de los . . . . .
alimentos congelado . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Uso - Puesta en marcha frigorifico - Regulación de la temperatura - . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Refrigeracìon de alimentos y bebidas - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Rejillas movibles - Ubicación estantes de la contrapuerta- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Consejos- Consejos para refrigeración - Consejos para congelación - Consejos para . . . . . . . . . . . .
conservación de alimentos congelados . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Manutención - Temporadas largas de inactividad - Limpieza periódica - Làmpara de iluminaciòn . . . .
Desescarche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Como actuar si el aparato no funciona . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Datos técnicos - Instalación - Colocación - Retenes-Repisas . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Instalación - Conexión elétrica - Instrucciones para la instalación . . . . . . . . . . . . . . . . . . . . . . . . . . .12
asistencia.
Si el aparato es transportado en forma horizontal
es posible que el aceite contenido en el
compresor pase al circuito refrigerante. Esperar
por lo menos dos horas antes de poner en
marcha el aparato para dar tiempo a que el
aceite regrese al compresor.
Protección del ambiente
Este aparato no contiene en el circuito refrige-
rante y en el aislamiento, gases refrigerantes
nocivos para el ozono. El aparato no debe ser
eliminado junto con los deshechos urbanos y
chatarras. Se debe evitar el dano del circinto
refrigerante, sobre todo en la parte posterior
cerca del intercambiador. Las informaciones
sobre los centros de recepciõn son
suministradas por las autoridades municipales;
Los materiales usados en este aparato
marcados con el simbolo son reciclables.
Desguace de aparatos viejos
El símbolo en el producto o en su embalaje
indica que este producto no se puede tratar como
desperdicios normales del hogar. Este producto se
debe entregar al punto de recolección de equipos
eléctricos y electrónicos para reciclaje. Al asegurarse
de que este producto se deseche correctamente,
usted ayudará a evitar posibles consecuencias
negativas para el ambiente y la salud pública, lo cual
podría ocurrir si este producto no se manipula de
forma adecuada. Para obtener información más
detallada sobre el reciclaje de este producto, póngase
en contacto con la administración de su ciudad, con
su servicio de desechos del hogar o con la tienda
donde compró el producto.
Seguir atentamente las indicaciones del
fabricante para la conservación y/o congelación
de los alimentos.
En todos los aparatos de refrigeración y
congelación existen superficies que se cubren
con escarcha. Según el modelo, la escarcha
puede ser eliminada automáticamente
(desescarche automático) o manualmente. No
intentar nunca quitar la escarcha con un objeto
puntiagudo ya que se podría dañar
irremediablemente el evaporador. Utilizar para
ello sólo un rascador de plástico. Por el mismo
motivo no despegar nunca las cubetas del hielo
con un cuchillo o cualquier otro objeto
puntiagudo.
No colocar en el compartimiento de la baja
temperatura (congelador o conservador) bebidas
gaseosas que podrían explotar.
Instalación
El aparato se calienta considerablemente en la
proximidad del condensador y del compresor, por
lo tanto hay que verificar que el aire pueda
circular libremente alrededor del mismo. Una
ventilación insuficiente puede causar un mal
funcionamiento y daños al aparato. Seguir
cuidadosamente las instrucciones que se dan
para la instalación.
Por motivos de seguridad la ventilación debe ser
efectuada como se indica en la respectiva figura.
Atención: mantener las aperturas para la
ventilación libres de cualquier obstáculo.
Una vez instalado el aparato verificar que no esté
apoyado sobre el cable de alimentación.
Importante: en caso de que el cable de
alimentación se dañe, deberá ser sustituido con
un cable especial. Ambos cables pueden ser
solicitados al fabricante o al Servicio de
3
22
ATTENTION!
It must be possible to disconnect the appliance from
the mains power supply; the plug must therefore be
easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply. Voltage
can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized
auto-transformer must be used.
The appliance must be earthed.
The power supply cable plug is provided with a
contact for this purpose.
If the domestic power supply socket is not earthed,
connect the appliance to a separate earth in
compliance with current regulations, consulting a
specialist technician.
The Manufacturer declines all responsibility if
the above safety precautions are not observed.
INSTALLATION
Location
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc. See the enclosed built-in instructions.
This appliance complies with the following
E.E.C. Directives:
- 87/308 EEC of 2/6/87 relative to radio interference
suppression.
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Shelf holders
Your appliance is equipped with shelf retainers that
make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
Raise the shelf from the back, push it in the direction
of the arrow until it is freed and remove the retainers.
B
A
4
Panel de mandos del congelador / aparado
H - Lámpara chivato ENCENDIDO/APAGADO
I - Botón ENCENDIDO/APAGADO del aparado
J - Botón para la regulación de la temperatura
(más caliente)
K - Indicador de la temperatura del congelador
L - Botón para la regulación de la temperatura
(más fría)
M - Lámpara chivato Auto freeze
N - Botón de la función Auto freeze
O - Lámpara chivato de alarma
P - Botón de desactivación de la alarma
H. Lámpara chivato
ENCENDIDO/APAGADO
I. Botón ENCENDIDO/APAGADO
ENCENDIDO: Apretar el botón (I). La lámpara
chivato (H) se enciende.
APAGADO: Mantener apretado el botón (I)
hasta que se apagan la lámpara
chivato (H) y el indicador de
temperatura.
J - L. Botones para la regulación de
la temperatura
Es posible programar la temperatura entre -15°C y -
24°C.
Apretando el botón (J o L), en el indicador (K)
parpadea la temperatura programada. Es posible
modificar la temperatura programada sólo cuando el
indicador parpadea. Para programar una temperatura
más caliente apretar el botón (J), para programar una
temperatura más fría apretar el botón (L). El indicador
sigue mostrando, por unos segundos, la temperatura
recién seleccionada y luego indica de nuevo la
temperatura corriente dentro del compartimiento.
La temperatura programada es alcanzada dentro de
las 24 h.
Atención!
Durante el periodo de estabilización, a la primera
puesta en marcha, la temperatura mostrada puede no
corresponderse con la temperatura programada.
Durante este periodo es posible que la temperatura
mostrada sea más baja que la temperatura
programada.
D. Indicador de temperatura
Durante el funcionamiento normal indica la temperatura
media dentro del compartimiento frigorífico.
Atención!
Es normal tener una diferencia entre la temperatura
mostrada y la programada. En particular cuando:
- recientemente se ha modificado la temperatura
programada.
- la puerta ha quedado abierta por mucho tiempo.
- se han puesto en el frigorífico alimentos calientes.
De todas maneras son normales diferencias de hasta
5°C dentro del compartimiento.
M. Lámpara chivato Auto freeze
L
O
I
J
K
P
M
N
H
Limpieza de las partes internas
Antes del empleo limpiar todas las partes internas
con agua tibia y jabón neutro, a fin de eliminar el
característico olor de nuevo y secarlas luego
cuidadosamente.
USO
No emplear detergentes o polvos
abrasivos que podrían dañar las superficies.
21
CUSTOMER SERVICE AND SPARE PARTS
If the appliance is not functioning properly, check
that:
the plug is firmly in the wall socket and the mains
power switch is on;
there is an electricity supply (find out by plugging
in another appliance);
If there are water drops on the bottom of the
cabinet, check that the defrost water drain
opening is not obstructed (see “Defrosting”
section).
If your appliance is still not working properly after
making the above checks, contact the nearest
service centre.
To obtain fast service, it is essential that when you
apply for it you specify the model and serial number
of your appliance which can be found on the
guarantee certificate or on the rating plate located
inside the appliance, on the bottom left-hand side.
To carry out complete defrosting of the freezer
compartment proceed as follows:
1. Press button ON/OFF (I) ;
2. leave the door open, insert the plastic scraper in
the appropriate seating at the bottom centre,
placing a basin underneath to collect the defrost
water;
3. when defrosting is completed, dry the interior
thoroughly and refit the plug; keep the scraper for
future use;
4. Press button ON/OFF (I). After letting the
appliance run for at least half an hour, replace
the previously removed food into the
compartment.
Important:
Never use sharp metal tools to scrape off frost
from the evaporator as you could damage it.
Do not use a maechanical device or any artificial
means to speed up the thawing process other
than those recommended by the manufacturer.
D068
A temperature rise of the frozen food packs,
during defrosting, may shorten their safe storage
life.
TECHNICAL INFORMATION
205
70
0,86
314
13
20
Fridge Net Capacity lt.
Energy Consumption kWh/24h
Energy Consumption kWh/annuo
Freezing Capacity kg/24h
Rising Time
Freezer Net Capacity lt.
The Technical info are on the rating plate situated on the left inside the appliance.
unas 6
horas antes
unas 24
horas antes
no sirve
no sirve
Introducción de pequeñas cantidades de
alimentos frescos (aproximadamente 5 kg)
Introducción de la cantidad máxima de
alimentos frescos (ver la placa de datos)
Introducción de alimentos congelados
Introducción de pequeñas cantidades de
alimentos frescos diarios hasta 2 kg
5
Descongelación de los alimentos
congelados
Antes de utilizar los alimentos congelados, se pueden
descongelar en el frigorífico o a temperatura
ambiente, depende del tiempo disponibile para la
operación. Los alimentos congelados pueden
cocinarse directamente sin tener que descongelarlos;
en este caso, naturalmente, el tiempo de cocción
necesario será algo más largo que el habitual.
Cubitos de hielo
El congelador lleva dos cubetas para la producción
de hielo. Llene esta cubeta con agua inasta les 3/4
partes y colóquela en los compartimientos de
congelación. No utilice nunca instrumentos
metálicos para despegar les cubetas del
congelador.
Importante
Si en caso de descongelación accidental, por
ejemplo cuando falta la corriente, el período de
interrupción supera el valor indicado en la tabla
de los datos técnicos, bajo el concepto “tiempo
de aumento” será necesario consumir los
alimentos en breve tiempo o cocinarlos
inmediatamente y después volver a congelarlos
(cuando se habrán enfriado.
Conservación de los alimentos
sobrecongelados
Al poner en servicio el aparato o después de un
periodo de inactividad, poner los alimentos en el
aparato después de haberlo dejado en marcha
durante por lo menos dos horas con la función
Super Frost, seguidamente desactivar dicha función.
Congelación de los alimentos
frescos
El compartimiento es apto para congelar
alimentos frescos y conservar por mucho tiempo
alimentos congelados y sobrecongelados.
Para congelar los alimentos frescos activar la
función Super Frost por lo menos 24 horas antes.
Poner los alimentos a congelar en la sección
superior ya que es el sitio más frío.
O. Lámpara chivato de alarma
P. Botón de desactivación de la
alarma
Un aumento anómalo de la temperatura del
compartimiento congelador (por es. corte de energía
eléctrica) es indicado por el parpadeo de la lámpara
chivato (O) y por una señala acústica.
Cuando se restablecen las condiciones normales la
señala acústica se apaga mientras que sigue
parpadeando la lámpara chivato de alarma.
Apretando el botón de la alarma (P) en el indicador (K)
es mostrada, por unos segundos, la temperatura más
caliente alcanzada en el compartimiento.
Puesta en servicio y regulación de
la temperatura
Enchufar la clavija en la toma de corriente. Apretar el
botón (I). El compartimiento congelador está en
marcha. El compartimiento congelador está
programado para una temperatura de -18°C. Se
alcanza dicha temperatura en unas horas.
Tan pronto se enciende el compartimiento frigorífico
en el indicador (K) es mostrada la temperatura
corriente en el compartimiento congelador, parpadea
la lámpara chivato de alarma (O) y se activa la señala
acústica.
el botón de alarma (P).
Se apaga la señal acústica, mientras que sigue
parpadeando la lámpara chivato de alarma (O) hasta
cuando se alcanza la temperatura programada.
N. Botón función Auto freeze
Para congelar alimentos frescos se debe activar la
función Auto freeze. Apretar el botón (N). Se enciende
la lámpara chivato (M).
Si se desea interrumpir la función de la congelación
rápida, apretar de nuevo el botón (N), de lo contrario
la función se apaga automáticamente. Se apaga la
lámpara chivato (M).
Atención!
Cuándo se debe utilizar la función Auto freeze:
20
MAINTENANCE
Periods of non-operation
When the appliance is not in use for long periods,
take the following precautions:
Turn off the appliance;
remove all food;
defrost and clean the interior and all accessories;
leave the door ajar to allow air to circulate to prevent
unpleasant smells.
Periodic cleaning
Clean the inside with warm water and bicarbonate of
soda. Rinse and dry thoroughly.
Clean the condenser (black grill) and the
compressor at the back of the appliance with a
brush or a vacuum cleaner. This operstion will
improve the performance of the appliance and save
electricity consumption.
Defrosting
Frost is automatically eliminated from the evaporator
of the refrigerator compartment every time the motor
compressor stops, during normal use. The defrost
water drains out through a trough into a special
container at the back of the appliance, over the
motor compressor, where it evaporates.
It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator
compartment channel to prevent the water
overflowing and dripping onto the food inside.
Use the special cleaner provided, which you will
find already inserted into the drain hole.
The freezer compartment, however, will become
progressively covered with frost. This should be
removed with the special plastic scraper provided,
whenever the thickness of the frost exceeds 4 mm.
During this operation it is not necessary to switch off
the power supply or to remove the foodstuffs.
However, when the ice becomes very thick on the
inner liner, complete defrosting should be carried out
and it is advisable to carry out this operation when
the appliance is empty.
D037
Unplug the appliance before carrying out
any maintenance operation.
Warning
This appliance contains hydrocarbons in its cooling
unit; maintenance and recharging must therefore
only be carried out by authorized technicians.
Interior light
If it becomes necessary to replace the lamp, press
on the rear hook and at the same time
slide the cover in the direction indicated by the arrow.
Attention:
Replace the lamp with one of the same power (the
maximum power is shown on the light diffuser).
6
Panel de mandos del frigorífico
A. Lámpara chivato ENCENDIDO/APAGADO
B Botón ENCENDIDO/APAGADO del
compartimiento frigorífico
C Botones para la regulación de la temperatura del
frigorífico (más caliente)
D Indicador de la temperatura del frigorífico
E Botones para la regulación de la temperatura del
frigorífico (más fría)
F Lámpara chivato Auto fresh
G Botón de la función Auto fresh
Pulsar (I) para el funcionamiento completo de
todo el aparato.
Pulse el botón (B).El frigorifico puede funcionar
independientemente del compartimento
congelador,pero solo si el aparato está
funcionando.
A. Lámpara chivato
ENCENDIDO/APAGADO
B. Botón ENCENDIDO/APAGADO
ENCENDIDO: Apretar el botón (B). La lámpara
chivato (A) se enciende.
APAGADO: Mantener apretado el botón (B)
hasta que se apagan la lámpara
chivato (A) y el indicador de
temperatura.
C - E. Botones para la regulación
de la temperatura
Es posible programar la temperatura entre +2°C y +8°C.
Apretando el botón (C o E), en el indicador (B) parpadea
la temperatura programada. Es posible modificar la
temperatura programada sólo cuando el indicador
parpadea. Para programar una temperatura más
caliente apretar el botón (C), para programar una
temperatura más fría apretar el botón (E). El indicador
sigue mostrando, por unos segundos, la temperatura
recién seleccionada y luego indica de nuevo la
temperatura corriente dentro del compartimiento.
La temperatura programada es alcanzada dentro de las
24 h.
Atención!
Durante el periodo de estabilización, a la primera puesta
en marcha, la temperatura mostrada puede no
corresponderse con la temperatura programada.
Durante este periodo es posible que la temperatura
mostrada sea más baja que la temperatura programada.
D. Indicador de temperatura
Durante el funcionamiento normal indica la temperatura
media dentro del compartimiento frigorífico.
Atención!
Es normal tener una diferencia entre la temperatura
mostrada y la programada. En particular cuando:
- recientemente se ha modificado la temperatura
programada.
- la puerta ha quedado abierta por mucho tiempo.
- se han puesto en el frigorífico alimentos
calientes.
F. Botón función Auto Fresh
G. Lámpara chivato Auto Fresh
Con la función Auto fresh se programa el frigorífico para
sus máximas prestaciones. Dicha función está
aconsejada cuando en el frigorífico se ponen grandes
cantidades de alimentos.
Apretar el botón de la función Auto fresh (G). Se
enciende la lámpara chivato (F) Auto fresh. La
temperatura interna baja hasta +2°C.
Al cabo de aproximadamente 6 horas, la función Auto
fresh se desactiva automáticamente.
E
A
B
C
D
G
F
19
Hints for storage of frozen food
To obtain the best performance from this appliance,
you should:
make sure that the commercially frozen
foodstuffs were adequately stored by the retailer;
be sure that frozen foodstuffs are transferred
from the foodstore to the freezer in the shortest
possible time;
not open the door frequently or leave it open
longer than absolutely necessary.
Once defrosted, food deteriorates rapidly and
cannot be refrozen.
Do not exceed the storage period indicated by
the food manufacturer.
The numbers indicate storage times in months for the
appropriate types of frozen goods. Whether the
upper or lower value of the indicated storage time is
valid depends on the quality of the foods and pre-
treating before freezing;
do not put carbonated liquids (fizzy drinks,
etc.) in the freezer compartment as they may
burst.
Hints for freezing
To help you make the most of the freezing process,
here are some important hints:
the maximum quantity of food which can be
frozen in 24 hrs. is shown on the rating plate;
the freezing process takes 24 hours. No further
food to be frozen should be added during this
period;
only freeze top quality, fresh and thoroughly
cleaned, foodstuffs;
prepare food in small portions to enable it to be
rapidly and completely frozen and to make it
possible subsequently to thaw only the quantity
required;
wrap up the food in aluminium foil or polythene
and make sure that the packages are airtight;
do not allow fresh, unfrozen food to touch food
which is already frozen, thus avoiding a rise in
temperature of the latter;
lean foods store better and longer than fatty
ones; salt reduces the storage life of food;
water ices, if consumed immediately after
removal from the freezer compartment, can
possibly cause the skin to be freeze burnt;
it is advisable to show the freezing-in date on
each individual pack to enable you to keep tab of
the storage time;
the symbols on the drawers show different types of
frozen goods.
HINTS
Hints for refrigeration
Useful hints:
Meat (all types): wrap in polythene bags and place
on the glass shelf above the vegetable drawer.
For safety, store in this way only one or two days
at the most.
Cooked foods, cold dishes, etc..: these should be
covered and may be placed on any shelf.
Fruit and vegetables: these should be thoroughly
cleaned and placed in the special drawer(s)
provided.
Butter and cheese: these should be placed in
special airtight containers or wrapped in aluminium
foil or polythene bags to exclude as much air as
possible.
Milk bottles: these should have a cap and should
be stored in the bottle rack on the door.
Bananas, potatoes, onions and garlic, if not
packed, must not be kept in the refrigerator.
7
D338
Rejillas movibles
En las paredes del compartimento existen unas
guías que consienten poner las rejillas a distintas
alturas.
Para usar mejor el espacio, los semi-estantes
anteriores se puede sobreponer a los posteriores.
Ubicación estantes de la
contrapuerta
Para permitir el almacenamiento de alimentos de
varias dimensiones, se pueden colocar les repisas a
diferentes alturas. Procedan de esta manera:
Empujen la repisa en el sentido de la flecha inasta
cuando no esté libre y volverla a colocar a la altura
deseada.
Refrigeracíon de alimentos y bebidas
Para utilizar de la mejor manera el compartimiento
refrigerante, es necesario:
no introducir comidas calientes o líquidos en en
evaporacíon;
tapar o envolver los alimentos, especialmente si
son aromáticos;
no colocar sobre las rejillas papeles, cartones o
plásticos que obstaculicen la circulacíon del aire.
Puesta en servicio y regulación de
la temperatura
Enchufar la clavija en la toma de corriente.
Pulsar (I) para el funcionamiento completo de
todo el aparato.
Pulse el botón (B).El frigorifico puede funcionar
independientemente del compartimento
congelador,pero solo si el aparato está
funcionando.
El compartimiento frigorífico está programado para una
temperatura de +5°C. Se alcanza dicha temperatura en
unas horas.
Al encender el compartimiento frigorífico en el indicador
(D) es mostrada la temperatura corriente en el
compartimiento frigorífico.
Importante
Si la puerta permanece abierta durante mas de 7
minutos la luz interior será desconectada
electrónicamete
la luz se reactivará al volver a cerrar y abrir la
puerta.
18
Fresh food refrigeration
To obtain the best performance:
do not store warm food or evaporating liquids in
the refrigerator;
do cover or wrap the food, particularly if it has a
strong flavour.
Position food so that air can circulate freely round
it.
Movable shelves
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.
For better use of space, the front half-shelves can lie
over the rear ones.
D338
Positioning the door shelves
To permit storage of food packages of various sizes,
the door shelves can be placed at different heights.
To make these adjustments proceed as follows:
Gradually pull the shelf in the direction of the arrows
until it comes free, then reposition as required.
Important
If the door remains ajar for more than 7 minutes, the
internal lighting will turn off electronically; after this, the
lighting function will be reset by opening and closing
the door itself.
8
CONSEJOS
Consejos para refrigeración
Para un correcto uso aconsejamos:
Carne: debe ser envuelta en saquitos de plástico y
colocada en el espacio situado sobre los cajones
verdura.
En esta posicíon la carne puede ser conservada
al máximo por 1 a 2 dias.
Alimentos cocinados , platos fríos, etc. tienen
que conservarse bien cubiertos y se pueden colocar
en cualquier bandeja del frigorífico.
Fruta y verdura: una vez lavada, ha de colocarse
en el cajón (cajones) inferior.
Mantequilla y queso: deben colocarse en los reci-
pientes adecuados o envueltos en hojas de aluminio
o politileno, a fin de evitar el contacto con el aire.
Leche embotellada: bien tapada, en la contropuerta.
Bananas, papas, cebollas y ajo, si no están
confeccionados, no se deben colocar en
frigorífico.
Consejos para congelación
Todos los productos por congelar tienen que ser
frescos y de buena calidad.
Los alimentos por congelar tienen que estar
confeccionados en porciones suficientes al
consumo familiar, para que puedan utilizarse en
una sola vez.
Las confecciones pequeñas permiten una
congelación más rápida y uniforme. No hay que
olvidar que una vez descongelados, la calidad de
los alimentos se deteriora rápidamente.
Los alimentos por congelar tienen que encerrarse
en bolsitas impermeables al aire o en recipientes
especiales. Cierre cuidadosamente les bolsitas o
los recipientes sacando todo el aire de su interior.
No meta nunca en el congelador botellas o latas
de bebidas gaseosas: podrian explotar.
No introduzca nunca alimentos o liquidos
calientes. No llene demasiado les bolsitas o los
contenedores con tapa de los alimentos por
congelar.
No consuma ciertos productos apenas sacados
del congelador (cubitos de hielo, etc.) porque la
temperatura muy baja podria causar quemaduras.
Los símbolos indican diferentes tipos de
productos congelados.
Las cifras indican el tiempo de conservación en
meses para cada tipo de producto congelado. La
validez del valor máximo o mínimo establecido
del tiempo de conservación de los productos
congelados depende de la calidad y de la
preparación de ellos antes de ser congelados. El
valor mínimo corresponde a víveres con un
elevado porcentaje de grasa.
Ponga la fecha de congelacidn en cada bolsa o
contenedor para controlar los tiempos de
conservación.
Consejos para conservación de
alimentos congelados
Controle siempre la fecha de preparación
indicada sobre los alimentos congelados
comprados.
No abra la puerta del congelador muy a menudo
y déjela abierta sólo el tiempo indispensable. Los
aumentos innecesarios de temperatura reducen
considerablemente la duración de conservación
de los alimentos.
Controle que todas les confecciones de
alimentos congelados estén intactas; de no
estarlo los alimentos podrían estropearse. Si les
confecciones presentan signos de humedad o
están hinchadas, quiere decir que los alimentos
no tran sido conservados correctamente y por lo
tanto el producto ha perdido parte de su calidad
de origen.
Cuando se compran alimentos congelados, es
aconsejable llevar una bolsa termoaislante. Se
recomienda, asimismo adquirirlos al finalizar sus
compras.
Envuélvalos en papel de periódico y métalos en
el congelador en cuanto llegue a su casa.
17
Control Panel
Use of the fridge
A On/OFF light
B Fridge button ON/OFF
C Temperature setting button (warmest)
D Temperature indicator
Press (I) for the functioning of the whole
appliance .
Press (B) can function the fridge compartment
separately with the appliance in function.
A. Light ON/OFF
B. Button ON/OFF
ON: Press the button (B). The pilot light (A)
switches on.
OFF: Keep press the button (B) until the pilot light
(A) and the temperautre indicator switched off.
C - E. Temperature setting buttons
The temperature can be adjusted between +2°C and
+8°C.
By pressing the button (C or E), the current
temperature setting flashes on the indicator. It is
possible to modify the setting temperature only with
flashed indicator. To set a warmer temperature,
press button (C). To set a colder temperature, press
button (E). The indicator display the newly selected
temperature for a few seconds and then shows
again the inside compartment temperature.
The newly selected-temperature must be reached
after 24 hours.
Attention!
During the stability period by the first starting the
temperature displayed can not correspond to the
setting temperature. During this time it is possible
that the temperature displayed is lower than the
setting temperature.
D. Temperature indicator
During normal functioning the indicator shows the
temperature inside the fridge.
E
A
B
C
D
G
F
Attention!
Difference between the temperature displayed and
temperature setting is normal. Especially when:
- a new setting has recently been selected
- the door has been left open for a long time
- warm food has been placed in the compartment
F. Super cooling pilot light
G. Super cooling button
The maximum performance is obtained by setting
the supercooling function. It’s recommended when
loading large quantities of food.
Press the supercooling button (G).The relevant pilot
light (F) switches on.
The internal temperature goes down to +2°C.
After about 6 hours the supercooling function
switches off automatically.
Operation
Insert the plug in the power socket.
Press (I) for the functioning of the whole
appliance .
Press (B) can function the fridge compartment
separately but only with the appliance in
function.
The fridge is pre-set to run at +5°C. This
temperature will be reached in a few hours.
As soon as the appliance is switched on the
temperature indicator (D) shows the current
temperaure inside the fridge.
E Temperature setting button (coldest)
F Super cooling light
G Super cooling button
9
MANUTENCIÓN
Desenchufar siempre el aparato antes de
proceder a cualquier operación de limpieza.
Atención
Este aparato contiene hidrocarburos en el circuito
refrigerante; por lo tanto el mantenimiento y la
recarga deben ser efectuados exclusivamente por
personal autorizado por la empresa.
Temporadas largas de inactividad
Durante los períodos en los cuales el aparato no
esté funcionando observar las siguientes
precauciones:
desenchufarlo;
sacar todos los alimentos;
limpiar cuidadosamente el interior y todos los
accesorios.
Dejar las puertas entornadas para facilitar la
circulación del aire, a fin de evitar la formación de
olores desagradables.
Limpieza periódica
Lavar el interior con agua tibia y bicarbonato sódico.
Enjuagar y secar cuidadosamente.
Limpiar el condensador y el motocompresor con un
cepillo o un aspirador. Esta operación mejorará el
funcionamiento con el consiguiente ahorro de
energia.
Desescarche
La escarcha del evaporador del compartimento
refrigerante se elimina automáticamente a cada
interrupcion del motocompresor. El agua de la
escarcha derretida, mediante un canal adecuado, se
recoge en un pequeño depósito colocado en la
parte posterior sobre el motocompresor del aparato,
de donde evapora.
Se recomienda limpiar periódicamente el agujero
de desagüe del agua de desescarche, situado en
la parte central del canal en el compartimiento
refrigerante, utilizando el «limpiador» adecuado
que se encuentra en el agujero, para evitar que
el agua de desescarche caiga sobre los
alimentos.
D037
mpara de iluminación
Para la sustitución eventual de la lámpara oprimir el
enganche posterior y al mismo tiempo sacar la tapa
en dirección de las flechas.
Atención:
Sustituir la lámpara por otra de igual potencia (la
potencia máxima está indicada en el difusor de luz).
16
Storage of frozen food
When first starting-up or after a period out of use,
before putting the products in the compartment let
the appliance run for at least two hours on the fast
frost setting, then push again the Super-frost button.
Important
In the event of accidental defrosting, for example
due to a power failure, if the power has been off
for longer that the value shown in the technical
characteristics chart under “rising time”, the
defrosted food must be consumed quickly or
cooked immediately and then refrozen (after
cooling).
Thawing
Deep-frozen or frozen food, prior to being used, can
be thawed in the refrigerator compartment or at
room temperature, depending on the time available
for this operation.
Small pieces may even be cooked still frozen, directly
from the freezer: in this case, cooking will take longer.
Ice-cube production
This appliance is equipped with one or more trays
for the production of ice-cubes. Fill these trays with
water, then put them in the freezer compartment.
Do not use metallic instruments to remove the
trays from the freezer.
O. Alarm reset light
P. Alarm reset button
In the event of an abnormal temperature rise inside
the freezer (e.g. power cut) warning light (O) will
start to flash and a buzzer will sound.
After the temperature has returned to normal, the
warning light (O) will continue to flash, although the
buzzer has stopped.
When the alarm button (P) is pressed, the warmest
temperature reached in the compartment flashes on
the indicator (K).
If the power has been off for a long time, frozen food
should be consumed as quickly as possible, or
cooked and then re-frozen.
Freezing fresh food
To freeze fresh food, press the Super Frost button
(N) at least 24 hours before.
Place the food to be frozen in the upper
compartment. The maximum quantity of food which
can be frozen in 24 hrs. is shown on the rating plate.
Warning!
When use the “Super Frost” function:
about 6 hrs
before
about 24 hrs
before
not needed
not needed
Introducing small quantities of fresh food
(about 5 kg)
Introducing the maximum quantity of food
(see rating plate)
Introducing frozen food
Introducing small quantities of fresh food
daily 2 kg maximum
Operation
Insert the plug in the power socket.
Press the button ON/OFF (I).
Theapplaince is switched on.
The freezer is pre-set to run at -18°C. this
temperature will be reached in a few hours.
As soon as the appliance is switched on the
temperature indicator (K) shows the current
temperature inside the freezer, the alarm reset light
(O) flashes and a buzzer sounds. Press the alarm
reset button (P). The buzzer stops and the alarm
light (O) continues to flash until the setting
temperature is reached.
10
COMO ACTUAR SI EL APARATO NO FUNCIONA
Si el aparato presentase anomalías será oportuno
controlar:
Que esté bien enchufado y que el interruptor de
la instalación eléctrica esté conectado.
Que no haya un corte de energía eléctrica.
Que el mando del termostato se encuentre en su
posición correcta.
Si el compresor funciona sin interrupción,
verificar que el termostato no se encuentre en
una posición
Además si el aparato hace demasiado ruido
verificar que los costados no estén en contacto
con muebles que pueden causar ruidos o
vibraciones y que la unidad refrigerante no vibre.
Si se ven restos de agua en el fondo del
refrigerador comprobar que el orificio de
desagüe de la escarcha derretida no esté
obturado (ver cápitulo Desescarche).
Después de hacer las verificaciones anteriores, si la
anomalía persiste, llame al Centro de Asistencia
Técnica más cercano.
Es importante en el momento de llamar
proporcionar la referencia del modelo y el
número de matrícula del aparato indicados en el
certificado de garantía o en la tarjeta matrícula.
Utilice para ello el respectivo limpiador que se en-
cuentra introducido en el orifcio de desagüe.
En el congelador en cambio, habrá que eliminar la
escarcha cada vez que se haya formado un gran
espesor (de unos 4 mm).
Durante esta operación no es necesario ni
desenchufar el aparato ni sacar los alimentos
contenidos en la cuba.
Recomendamos no utilizar utensilios metãlicos
para quitar la escarcha a fin de evitar dahos
graves al aparato.
En el caso que se formara una espesa capa de
hielo, será necesario descongelar totalmente el
aparato, procediendo de la manera siguiente:
1. Apretar el botón ON/OFF (I);
2. Envolver los alimentos congelados en varios
papeles de diario y colocarlos en un lugar muy
fresco.
3. Dejar la puerta abierta. Colocar el rascador en la
posición adecuada como se indica en la Fig.
poniendo debajo una cubeta para recoger el
agua.
4. Al completar la operación secar cuidadosamente
la cuba del congelador.
5. Conservar el rascador para usos futuros.
6. Apretar el botón ON/OFF (I).
7. Pasadas dos o tres horas el congelador está de
nuevo listo para la conservación de los alimentos
congelados .
Importante
No utilice nunca cuchillos u objetos metálicos para
quitar la escarcha acumulada. El aumento de
temperatura sobre la superficie de los alimentos
congelados puede disminuir la duración de la
conservación.
D068
15
L
O
I
J
K
P
M
N
H
H On/OFF light
I Appliance button ON/OFF
J Temperature setting button (warmest)
K Temperature indicator
H. Light ON/OFF
I. Button ON/OFF
ON: Press the button (I). The pilot light (H)
switches on.
OFF: Keep press the button (I) until the pilot light (H)
and the temperautre indicator switched off.
K.Temperature indicator
During normal functioning the indicator shows the
warmest temperature inside the freezer.
Difference until 5°C inside the compartment are
quite normal.
Attention!
Difference between the temperature displayed and
temperature setting is normal. Especially when:
- a new setting has recently been selected
- the door has been left open for a long time
- warm food has been placed in the compartment
J - L. Temperature setting buttons
The temperature can be adjusted between -15°C
and -24°C.
By pressing the button (J or L), the current
temperature setting flashes on the indicator. It is
possible to modify the setting temperature only with
flashed indicator. To set a warmer temperature,
press button (J). To set a colder temperature, press
button (L). The indicator display the newly
selectedtemperature for a few seconds and then
shows again the inside compartment temperature.
The newly selected-temperature must be reached
after 24 hours.
Attention!
During the stability period by the first starting the
temperature displayed can not correspond to the
setting temperature. During this time it is possible
that the temperature displayed is lower than the
setting temperature.
M. Super frost pilot light
N. Super frost button
To freeze fresh foods, the “Super frost” function must
be actived. Press the super frost button (N).The
relevant pilot light (M) switches on
The function can be deactived at any time, by
pressing the button (N), otherwise it automatically
switched off. With deactived functionth pilot light (M)
switches off.
Control Panel
Use of the freezer/ appliance
L Temperature setting button (coldest)
M Super frost light
N Super frost button
O Alarm reset light
P Alarm reset button
Cleaning the interior
Before using the appliance for the first time, wash
the interior and all internal accessories with luke-
warm water and some neutral soap so as to remove
the typical smell of a brand-new product, then dry
thoroughly.
USE
Do not use detergents or abrasive
powders, as these will damage the finish.
11
INSTALACIÓN
Colocación
Situar el aparato lejos de fuentes de calor, como:
radiadores, estufas, exposición directa a los rayos
del sol, etc.
Se debe poder desenchufar el aparato; por lo tanto
una vez efectuada la instalación es necesario que el
enchufe no quede escondido
B
A
Retenes-Repisas
Su aparato dispone de retenes-repisas que
permiten bloquear las repisas durante el transporte.
Para quitarlos actuar como sigue:
subir la repisa por la parte trasera, empujarla en la
dirección de la flecha hasta que queda libre y
seguidamente quitar los retenes.
DATOS TÉCNICOS
205
70
0,86
314
13
20
Capacidad neta del frigorífico en litros
Consumo energético en kWh/día
Consumo energético en kWh/año
Capacidad de congelación en kg/día
Tiempo de aumento de la temperatura de –18°C a –9°C por hora
Capacidad neta del congelador en litros
Los datos técnicos se indican en la placa-matrícula situada sobre el lado izquierdo interno del aparato.
14
CONTENTS
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Use - Cleaning the interior - Appliance/Freezer Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Use - Operation - Freezing fresh food - Storage of frozen food - Thawing -Ice-cube production . . . . . . . . . . . .16
Use - Fridge Control Panel- Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Use - Movable shelves - Positioning the door shelves - Fresh food refrigeration . . . . . . . . . . . . . . . . . . . . . . .18
Hints - Hints for refrigeration - Hints for freezing - Hints for storage of frozen food . . . . . . . . . . . . . . . . . . . . .19
Maintenance - Periods of no operation - Periodic cleaning - Interior light - Defrosting . . . . . . . . . . . . . . . . .20
Customer service and spare parts - Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Installation - Location - Shelf-holders - Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Installation - Dimensions of housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in
damage to the appliance. Do not use a
mechanical device or any artificial means to
speed up the thawing process other than those
recommended by the manufacturer. Never use
metal objects for cleaning your appliance as it
may get damaged.
Installation
During normal operation, the condenser and
compressor at the back of the appliance heat up
considerably. For safety reasons, minimum
ventilation must be as shown in the instructions.
Attention: keep ventilation openings clear of
obstruction.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Important: if the supply cord is damaged, it must
be replaced by a special cord or assembly availa-
ble from the manufacturer or its service agent.
If the appliance is transported horizontally, it is
possible that the oil contained in the compressor
flows in the refrigerant circuit. It is advisable to
wait at least two hours before connecting the
appliance to allow the oil to flow back in the
compressor.
There are working parts in this product which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
Parts which heat up should not be exposed.
Wherever possible the back of the product should
be against a wall.
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials.The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from municipal
authorities.The materials used on this appliance
marked by the symbol are recyclable.
Disposal of old Appliances
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product, please
contact your local city office, your household waste
disposal service or the shop where you purchased
the product.
12
Instrucciones para la instalación
Dimensiones del hueco
Altura (1) 1780 mm
Profundidad (2) 550 mm
Anchura (3) 560 mm
Para una adecuada ventilación seguir les
indicaciones de la Fig.
Atención: mantener las aperuras para la
ventilación libres de cualquier obstáculo.
Es necesario además que el hueco tenga un
conducto de ventilación con estas medidas:
profundidad 50 mm
ancho 540 mm
PR01
540
50
3
2
1
50 mm
min.
200 cm
2
200 cm
2
min.
D567
Conexión eléctrica
Antes de enchufar el aparato, asegurarse de que la
tensión y la frecuencia indicadas en la tarjeta
matrícula, correspondan a las de la instalación
doméstica. Se admite una oscilación de 6% sobre la
tensión nominal.
Para el funcionamiento a tensiones distintas, habrá
que utilizar un autotransformador de potencia
adecuada. Asegurarse de que la toma de corriente y
el enchufe sean compatibles entre sí sin tener que
interponer reducciones ladrones o adaptadores
varios. Si fuera necesario, cambiar la toma de la
instalación de la casa con una adapta.
Es indispensable conectar el aparato a una toma
de tierra eficaz.
Para ello el enchufe del cable de alimentación está
dotado de un adecuado contacto. Si la toma de
corriente de la instalación doméstica no estuviera
conectada a tierra, conectar el aparato a una
instalación de tierra, conforme a las leyes en vigor,
consultando para ello con un técnico especializado.
El fabricante declina toda responsabilidad en el
caso que esta norma no sea respetada.
Este aparato es conforme a las siguientes
Directivas Comunitarias:
- 87/308 CEE del 2/6/87 relativa a la supresión de
interferencias radio.
- 73/23 CEE 19/02/73 (Baja tensión) y
modificaciones sucesivas;
- 89/336 CEE 03/05/89 (Compatibilidad
electromagnética) y modificaciones sucesivas.
13
WARNINGS
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is supplied with the appliance in order that the
new owner can be acquainted with the functioning of the appliance and the relevant warnings.
If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock
(latch) on the door or lid, be sure to make that spring lock unusable before you discard the old
appliance. This will prevent it from becoming a death-trap for a child.
These warnings are provided in the interest of safety.You must read them carefully before installing or
using the appliance.
General Safety
This appliance is designed to be operated by
adults. Children should not be allowed to tamper
with the controls or play with the product.
It is dangerous to alter the specifications or
modify this product in any way.
Before any cleaning or maintenance work is carried
out, be sure to switch off and unplug the appliance.
This appliance is heavy. Care should be taken
when moving it
Ice lollies can cause frost burns if consumed
straight from the appliance.
Take utmost care when handling your
appliance so as not to cause any damages to
the cooling unit with consequent possible
fluid leakages.
The appliance must not be located close to
radiators or gas cookers.
Avoid prolonged exposure of the appliance to
direct sunlight.
There must be adequate ventilation round the
back of the appliance and any damage to the
refrigerant circuit must be avoided.
For freezers only (except built-in models): an
ideal location is the cellar or basement.
Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances.
Service/Repair
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person
This product should be serviced by an authorized
Service Centre, and only genuine spare parts
should be used.
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
more serious malfunctioning. Refer to your local
Service Centre, and always insist on genuine
spare parts.
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging must
therefore only be carried out by authorized
technicians.
Use
The domestic refrigerators and freezers are
designed to be used specifically for the storage
of edible foodstuffs only.
Best performance is obtained with ambient
temperature between +18°C and +43°C (class T);
+18°C and +38°C (class ST); +16°C and +32°C
(class N); +10°C and +32°C (class SN). The
class of your appliance is shown on its rating
plate.
Warning: when the ambient temperature is not
included within the range indicated for the class
of this appliance, the following instructions must
be observed: when the ambient temperature
drops below the minimum level, the storage
temperature in the freezer compartment cannot
be guaranteed; therefore it is advisable to use the
food stored as soon as possible.
Frozen food must not be re-frozen once it has
been thawed out.
Manufacturers’ storage recommendations should
be strictly adhered to. Refer to relevant
instructions.
The inner lining of the appliance consists of
channels through which the refrigerant passes. If
these should be punctured this would damage the
appliance beyond repair and cause food loss. DO
NOT USE SHARP INSTRUMENTS to scrape off
frost or ice. Frost may be removed by using the
scraper provided. Under no circumstances should
solid ice be forced off the liner. Solid ice should be
allowed to thaw when defrosting the appliance.
1 / 1

AEG Electrolux ERO2923 Manual de usuario

Categoría
Congeladores
Tipo
Manual de usuario

En otros idiomas