Yamaha V2 Manual de usuario

Categoría
Equipo musical
Tipo
Manual de usuario

Este manual también es adecuado para

RU
IT
ES
FR
DE
EN
V2.0
Supplementary
Manual
EnglishDeutschFrançaisEspañolItaliano
2
This supplementary manual explains mainly the functionality that was changed
or added in version 2.0 of the M7CL firmware. Please read this in conjunction
with the M7CL V1.1 supplementary manual and the M7CL Owner’s manual.
You can download the most recent version of the Help file from the Yamaha
website.
http://www.yamahaproaudio.com/
Input channel operations
•Now the top panel faders can also be used to adjust the
send levels from input channels to MATRIX buses
(p. 3).
In SENDS ON FADER mode, the send-destination
MATRIX bus can now be selected by pressing the
[MATRIX] navigation key and then pressing a [SEL]
key in the Centralogic section (p. 3).
The various channel parameters can now be saved
together in internal memory as channel library data
(p. 3).
Output channel operations
The various channel parameters can now be saved
together in internal memory as channel library data
(p. 3).
Input/output patching
•You can now select POST ON (immediately after the
fader and [ON] key) as the insert or direct output posi-
tion (p. 4).
When specifying or clearing a GEQ insertion, insert
will now be turned on/off automatically (p. 4).
EQ and Dynamics
The minimum level for an input channel’s GATE
threshold level is now -72 dB (p. 4).
Grouping and linking
When you enable channel link, HA gain and fader oper-
ations will now be linked while maintaining the level
difference between channels (p. 5).
Scene memory
•You can now use the Global Paste function to easily
modify parameters across multiple scenes (p. 6).
Recall Safe for the attenuator can now be selected inde-
pendently of EQ (p. 7).
Monitor/Cue
•A monitor fader has been added to the monitor output
level control, allowing you to use the STEREO MAS-
TER fader / MONO MASTER fader to control the level
(p. 5).
User settings
M7CL V2 Editor now allows you to make the same
user-defined key settings as on the console itself (p. 7).
Additional functions are now available for assignment
to the user-defined keys (p. 7).
•Regarding compatibility of data you create (p. 7).
Main changes
3
You can now use the top panel faders to adjust the send
levels from input channels not only to MIX buses but also
to MATRIX buses.
In SENDS ON FADER mode, you can now use the MIX/
MTRX ON FADER button to switch between the MIX
buses and MATRIX buses as the send destinations.
[When MIX ON FADER mode is ON]
[When MATRIX ON FADER mode is ON]
1
MIX/MTRX ON FADER select button
Each time you press this button, you’ll switch between MIX
ON FADER mode and MATRIX ON FADER mode.
B
MIX/MATRIX bus select button
Use these buttons to switch the send destination MIX bus or
MATRIX bus. The buttons will be joined if two buses are set
to stereo.
In SENDS ON FADER mode, the send-destination
MATRIX bus can now be selected by pressing the
[MATRIX] navigation key and then pressing a [SEL] key
in the Centralogic section.
Until now, EQ and dynamics were managed as individual
libraries, but now the channel parameters (including HA
settings) can be managed together in units of channels as
channel library data, and stored, recalled, or cleared from
internal memory.
You can recall 200 different settings each from the input
channel library and the output channel library. For both
input and output libraries, only 000 (Initial Data) is a read-
only preset.
The basic operations are the same for input channels and
output channels.
1
Use the [SEL] keys to select the channel
whose settings you want to manage.
2
Press an encoder of the SELECTED CHAN-
NEL section to access the SELECTED
CHANNEL VIEW screen.
3
Press the LIBRARY tool button to access
the INPUT CHANNEL LIBRARY window /
OUTPUT CHANNEL LIBRARY window.
The library window contains the following items.
[INPUT CHANNEL LIBRARY]
Using the faders to adjust the
send levels to the MATRIX buses
(MATRIX ON FADER mode)
1
2
1
2
Using the Centralogic section’s
[SEL] keys to select a MATRIX bus
Input/output channel library support
Using the channel library
3
4 5 6
4
[OUTPUT CHANNEL LIBRARY]
1
CURRENT TYPE
(OUTPUT CHANNEL LIBRARY only)
Displays the type of channel selected by the [SEL] key.
B
Library type (OUTPUT CHANNEL LIBRARY only)
Displays the type of channel for the library item in the list.
C
Library list
Selects the library item that will be the object of the opera-
tion. The selected library item will move to the center, and
will be highlighted.
D
STORE button
Stores the settings of the currently selected channel into the
selected location of the list. When you press this button, the
LIBRARY STORE window will appear, allowing you to
name the settings.
E
RECALL button
Recalls the settings shown in the list into the currently
selected channel.
F
CLEAR button
Clears (deletes) the library item selected in the list. When you
press this button, a dialog box will ask you to confirm the
Clear operation.
4
By turning any one of the multifunction
encoders, move the highlighted line in the
list to select the library number you want to
store, recall, or clear.
5
Press the STORE button, RECALL button,
or CLEAR button.
The rest of the steps are the same as for other libraries.
You can now select POST ON (immediately after the
fader and [ON] key) as the insert or direct output position
for input/output channels.
If a rack in which a GEQ is mounted is specified as the
insert-out or insert-in, the other patch point will automati-
cally be assigned to the same rack. At the same time,
insertion is now automatically turned on. Additionally, if
you defeat the insert-out or insert-in of a rack in which a
GEQ is mounted, the other patch point will automatically
be defeated, and insertion will automatically be turned off.
The minimum threshold level for an input channel GATE
is now -72 dB.
1
2
3
4 5 6
•For the output channel library, if the type of channel selected
by the [SEL] key differs from the type of channel selected in
the list, an indication of “CONFLICT” is shown at the right of
CURRENT TYPE. Recall can be executed even if the “CON-
FLICT” indication is shown, but since the constituent parame-
ters will be different, parameters that do not exist in the library
will be set to their default values.
NOTE
If you recall to a channel that is channel-linked, linking will be
cancelled for the recalled channel.
NOTE
POST ON added as an insert /
direct out position
Insert is automatically turned
on/off when GEQ insertion is enabled
or cancelled
Changed minimum value of the
GATE threshold level
5
When you enable channel link, HA gain and fader opera-
tions will now be linked while maintaining the level dif-
ference between channels of the link group.
Temporarily defeating link
For parameters (HA gain and fader) that preserve their rel-
ative level differences when linked, you can temporarily
defeat linking for all linked channels, for example when
you need to adjust the level balance between channels of a
link group. Hold down the [SEL] key of the channel
whose balance you want to adjust, and operate the param-
eter that you want to modify. While you’re holding down
the [SEL] key, the HA gain and fader will not be linked.
(However, temporary unlinking is not possible during the
fade that occurs when a scene memory is recalled.)
A monitor fader has been added to the monitor output
level control, allowing you to use the STEREO MASTER
fader / MONO MASTER fader to control the level.
You can now also use the [ON] key of the MONO channel
and STEREO channel to turn the monitor output on/off.
A new MONITOR FADER field has been added in the
MONITOR screen and the MONITOR popup window.
[MONITOR screen]
[MONITOR popup window]
1
MONITOR FADER LEVEL
Indicates the current monitor fader.
B
FADER ASSIGN MODE button
Each time you press this button of the MONITOR popup
window, you will alternate between NONE
STEREO
MONO
NONE.
If you select STEREO, you’ll be able to use the top panel
STEREO MASTER fader to control the monitor fader. You
can also use the [ON] key located above the STEREO MAS-
TER fader to turn the monitor output on/off.
If you select MONO, you’ll be able to use the top panel
MONO MASTER fader to control the monitor fader. You can
also use the [ON] key located above the MONO MASTER
fader to turn the monitor output on/off.
Channel link level differences maintained,
and can temporarily defeated
Using the STEREO/MONO MASTER fader to
adjust the monitor output level
1
21
The monitor fader and MONITOR LEVEL knob are located in
series. The top panel MONITOR LEVEL knob is still valid
even when you’re using this function to adjust the monitor
level. The monitor signal will not be output if the MONITOR
LEVEL knob is set to the minimum position.
The [ON] key of the STEREO channel or MONO channel will
operate in tandem with the MONITOR screen’s OUTPUT but-
ton. The PHONES OUT jack will always output the monitor
signal, regardless of whether the OUTPUT button is on or off.
•You can also assign a user-definable key to switch the
FADER ASSIGN MODE setting (p. 7).
The MONITOR button of the function access area is shown in
red for STEREO or in yellow for MONO, depending on the
FADER ASSIGN MODE setting.
NOTE
6
“Global Paste” is a function that lets you copy and paste
settings of the desired channel or parameter from the cur-
rent scene to scene data in memory (multiple selections
are allowed). This is a convenient way in which changes to
the current scene can be applied to multiple scenes that
have already been stored.
1
In the function access area, press the
SCENE field to access the SCENE LIST win-
dow.
2
In the lower right of the SCENE LIST win-
dow, press the GLOBAL PASTE button to
access the GLOBAL PASTE window.
In this screen you can select the copy-source channels/
parameters and specify the paste-destination scene
data.
3
Use the tabs to select the items to be cop-
ied from the following choices.
4
Select the copy-source channels and
parameters.
The display will depend on the tab you selected.
You cannot select different parameters for each chan-
nel.
Use the top panel [SEL] keys to select a channel.
INPUT tab
Select the input channel in the upper left, and its
parameters in the lower left.
You can select the following parameters.
OUTPUT tab
Select the output channel in the upper left, and its
parameters in the lower left.
You can select the following parameters.
RACK tab
Select RACK 1–8.
PATCH/NAME tab
Select from INPUT PATCH, INPUT NAME, OUT-
PUT PATCH, and OUTPUT NAME.
5
In the DESTINATION SCENE area, select the
range of paste-destination scenes.
The data will be pasted to all scenes in the range
between FROM and TO. Use multi-function encoder 7
to select FROM, and multi-function encoder 8 to
select TO.
6
Press the PASTE button.
The selected items of the current scene will be pasted
to the scene(s) in memory.
A progress bar will be shown while the Paste opera-
tion is being performed.
The STOP button is shown while the Paste function is
being executed; you can stop by pressing this button.
In this case, the Paste function will have been partially
executed, and the data cannot be restored to its previ-
ous state.
INPUT
Input channels and parameters
OUTPUT
Output channels and parameters
RACK
RACK 1–8
PATCH/NAME
Input/output patching and channel names
Using the Global Paste function to change
multiple scenes in a single operation
Using the Global Paste function
The Global Paste function can be used only by users for whom
SCENE LIST STORE/SORT is turned on in their user level set-
tings.
NOTE
ALL
All input channel parameters (except
INPUT PATCH and INPUT NAME)
HA
Settings for the head amp assigned to the
corresponding input channel
ATT
Attenuator
EQ
EQ settings
DYNA1
Dynamics 1 settings (including KEY IN
SOURCE and KEY IN FILTER)
DYNA2
Dynamics 2 settings (including KEY IN
SOURCE)
MIX ON/
SEND
Send to MIX bus on/off, send level, pan,
and PRE/POST
MTRX ON/
SEND
Send to MATRIX bus on/off, send level,
pan, and PRE/POST
FADER
Fader level
CH ON
[ON] key on/off status
ALL
All output channel parameters (except
OUTPUT PATCH and OUTPUT NAME)
ATT
Attenuator
EQ
EQ settings
DYNA1
Dynamics 1 settings (including KEY IN
SOURCE and KEY IN FILTER)
MATRIX ON
Send to MATRIX bus on/off (only for MIX
and STEREO/MONO channels)
MATRIX
SEND
Send level to MATRIX bus, pan, PRE/
POST (only for MIX and STEREO/MONO
channels)
FADER
Fader level
CH ON
[ON] key on/off status
WITH MIX
SEND
Selects whether the send level sent from
input channels to the selected MIX bus
will be included in the pasted data.
WITH MATRIX
SEND
Selects whether the send level sent from
input channels to the selected MATRIX
bus will be included in the pasted data.
7
Recall Safe for the attenuator can now be selected inde-
pendently of EQ.
In addition, the stereo, LINK, RECALL SAFE, and USER
LEVEL behavior of other mixing parameters has also
been changed. For details, refer to the "Mixing parameter
operation applicability" on the back of the included block
diagram.
M7CL V2 Editor now allows you to make the same user-
defined key settings as on the console itself. For details on
how to make these settings, refer to the M7CL V2 Editor
Owner’s manual.
Data created with firmware 2.0 (scenes, library data, setup
data, etc.) cannot be loaded into an M7CL console that is
using firmware V1 (any version prior to V2.0). However,
data created on an M7CL with firmware V1 can be loaded
into an M7CL that is using firmware V2.0.
Recall Safe settings made independently
for the attenuator
Assigning user-defined keys from
M7CL V2 Editor
Function
PARAME-
TER 1
PARAME-
TER 2
Explanation
MONI-
TOR ON
MASTER
(FADER
ASSIGN
MODE)
STEREO
MASTER
LATCH The key will switch
whether the STEREO
MASTER fader will be
used to control the moni-
tor level
UNLATCH The STEREO MASTER
fader will be used to con-
trol the monitor level
while the key is held
down
MONO
MASTER
LATCH The key will switch
whether the MONO
MASTER fader will be
used to control the moni-
tor level
UNLATCH The MONO MASTER
fader will be used to con-
trol the monitor level
while the key is held
down
SENDS
ON
FADER
MATRIX
1-8
Switches the MATRIX
ON FADER function on/
off for the selected
MATRIX
MIX ON
FADER
Switches the MIX ON
FADER function on/off
MATRIX ON
FADER
Switches the MATRIX
ON FADER function on/
off
SENDS ON
FADER
Switches the SENDS ON
FADER function on/off
M7CL
EDITOR
CON-
TROL
LIBRARY INPUT CH Opens the M7CL V2 Edi-
tor’s Library window -
INPUT CH tab
OUTPUT
CH
Opens the M7CL V2 Edi-
tor’s Library window -
OUTPUT CH tab
HOME SELECTED
CH VIEW
Displays the SELECTED
CHANNEL VIEW screen
OVERVIEW
Displays the OVERVIEW
screen
MOMEN-
TARY
Each press of the key will
alternately display the
SELECTED CHANNEL
VIEW screen and the
OVERVIEW screen
Functions that can be assigned to
user-defined keys
Compatibility of created data
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products
should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance
with your national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on
human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste disposal
service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or
dealer and ask for the correct method of disposal.
Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte
Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten benutzte elektri-
sche Geräte nicht mit dem normalen Haushaltsabfall entsorgt werden.
In Übereinstimmung mit Ihren nationalen Bestimmungen und den Richtlinien 2002/96/EC, bringen Sie alte Geräte bitte zur
fachgerechten Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen.
Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle Ressourcen zu schützen und verhindern mögliche
negative Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Müllentsor-
gung auftreten könnten.
Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte, kontaktieren Sie bitte Ihre örtliche Stadt-
oder Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel.
[Information für geschäftliche Anwender in der Europäischen Union]
Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren Händler oder Zulieferer für weitere Informationen.
[Entsorgungsinformation für Länder außerhalb der Europäischen Union]
Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausrangieren möchten, kontaktieren Sie
bitte Ihre örtlichen Behörden oder Ihren Händler und fragen Sie nach der sachgerechten Entsorgungsmethode.
EN
DE
Information concernant la Collecte et le Traitement des déchets
d’équipements électriques et électroniques.
Le symbole sur les produits, l’emballage et/ou les documents joints signifie que les produits électriques ou électroniques usa-
gés ne doivent pas être mélangés avec les déchets domestiques habituels.
Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques,
veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives
2002/96/EC.
En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauve-
garde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors
d’un traitement inapproprié des déchets.
Pour plus d’informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques,
veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les pro-
duits.
[Pour les professionnels dans l’Union Européenne]
Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques veuillez contacter votre vendeur
ou fournisseur pour plus d’informations.
[Information sur le traitement dans d’autres pays en dehors de l’Union Européenne]
Ce symbole est seulement valables dans l’Union Européenne. Si vous souhaitez vous débarrasser de déchets d’équipements
électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement
appropriée.
Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo
Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléc-
tricos usados no deben ser mezclados con desechos hogareños corrientes.
Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección apli-
cables, de acuerdo a su legislación nacional y las directivas 2002/96/EC.
Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto
negativo sobre la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos.
Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio
de gestión de residuos o el punto de venta en el cual usted adquirió los artículos.
[Para usuarios de negocios en la Unión Europea]
Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor para mayor
información.
[Información sobre la Disposición en otros países fuera de la Unión Europea]
Este símbolo sólo es válidos en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autorida-
des locales y pregunte por el método correcto de disposición.
Informazioni per gli utenti sulla raccolta e lo smaltimento di vecchia attrezzatura
Questo simbolo sui prodotti, sull’imballaggio, e/o sui documenti che li accompagnano significa che i prodotti elettriche e elettro-
niche non dovrebbero essere mischiati con i rifiuti domestici generici.
Per il trattamento, recupero e riciclaggio appropriati di vecchi prodotti, li porti, prego, ai punti di raccolta appropriati, in accordo
con la Sua legislazione nazionale e le direttive 2002/96/CE.
Smaltendo correttamente questi prodotti, Lei aiuterà a salvare risorse preziose e a prevenire alcuni potenziali effetti negativi
sulla salute umana e l’ambiente, che altrimenti potrebbero sorgere dal trattamento improprio dei rifiuti.
Per ulteriori informazioni sulla raccolta e il riciclaggio di vecchi prodotti, prego contatti la Sua amministrazione comunale locale,
il Suo servizio di smaltimento dei rifiuti o il punto vendita dove Lei ha acquistato gli articoli.
[Per utenti imprenditori dell’Unione europea]
Se Lei desidera disfarsi di attrezzatura elettrica ed elettronica, prego contatti il Suo rivenditore o fornitore per ulteriori informa-
zioni.
[Informazioni sullo smaltimento negli altri Paesi al di fuori dell’Unione europea]
Questo simbolo è validi solamente nell’Unione europea. Se Lei desidera disfarsi di questi articoli, prego contatti le Sue autorità
locali o il rivenditore e richieda la corretta modalità di smaltimento.
FR
ES
IT
+48V MASTER
+48V
+48V
+48V
+48V
+48V
ON
TALKBACK
INPUT
INPUT
SELECT
INPUT
PATCH
[TALKBACK
TALKBACK
OSCILLATOR
CASCADE IN
CASCADE OUT
MIX 1-16
CH 1-32 {48}
INSERT OUT 1-32 {48}
INSERT IN 1-32 {48}
CH INSERT IN 1-32 {48}
MIX INSERT IN 1-16
STEREO INSERT IN L,R,MONO (C)
PHONES LEVEL
MATRIX INSERT IN 1-8
INPUT]
[INPUT]
[ST IN]
[SLOT]
SLOT1
SLOT2
SLOT3
ST IN L
ST IN R
[1L-4R]
[1-32 {48}]
TALKBACK
GAIN
INPUT
1
2
3
1
2
3
1
2
3
1
2
3
AD
AD
AD
ON
AD
GAIN/TRIM
GAIN/TRIM
GAIN/TRIM
HA
HA
HA
HA
METER
INPUT TB
INPUT
1-32 {48}
INSERT POINT
INSERT
POST PAN L
POST PAN R
POST ON
4BAND
EQ
PRE EQ INSERT OUT
PRE FADER INSERT OUT
POST ON INSERT OUT
ST IN
1L-4R
SLOT1 1-16
PRE HPF
PRE HPF PRE EQ POST EQ
PRE EQ
PRE FADER
POST ON
POST ON
PAN LINK
MIX 1,3... 15
MIX 2,4... 16
MATRIX1,3...7
MATRIX2,4...8
LR MONO
TO MONO TO ST
TO LCR
PRE FADER
METER
METER
METER
To MIX
POST ON
POST PAN L
PRE EQ / PRE FADER / POST ON
PRE EQ / PRE FADER / POST ON
PRE EQ / PRE FADER / POST ON
PRE EQ / PRE FADER / POST ON
POST PAN R
To MIX
To MATRIX
To MATRIX
To MIX
To MIX
FIXED
VARI
VARI
FIXED
STEREO
VARI
STEREO
VARI
STEREO
METER
GR METER
KEYIN CUE
GR METER
METER
LEVEL/
DCA 1-8
METER
METER
BAL
POST PAN L
POST PAN R
PAN MODE
ST L
ST R
ON
ON
ON
ON
ON
ON
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
BAL
BAL
ON
ON
ON
ON
ON
ON
ON
SLOT2 1-16
SLOT3 1-16
SLOT3 1-16
SLOT2 1-16
SLOT1 1-16
RACK1 OUT
RACK2 OUT
RACK3 OUT
RACK4 OUT
RACK5 OUT
RACK6 OUT
RACK7 OUT
RACK8 OUT
A (L) / B (R)
A (L) / B (R)
A (L) / B (R)
A (L) / B (R)
A (L) / B (R)
A (L) / B (R)
A (L) / B (R)
A (L) / B (R)
INPUT 1-32 {48}
METER
METER
METER
METER METER METER METER
LEVEL
MATRIX CUE
CASCADE
IN
SELECT
Sine Wave
Pink Noise
Burst Noise
LR MONO
METER
METER
METER
INSERT
INSERT
POST ON
MONO (C)
ST L
ST R
PAN
PAN
PAN
LEVEL
HPF
LPF
ON
MIX
ST
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL/
DCA1-8
METER
To CASCADE IN
To MONITOR
SELECT
SELECT
SLOTIN
METER METER METER
SLOTIN SLOTIN
16
16
16
RACK
RACK
IN
PATCH
RACK1
RACK2 (same as RACK1)
RACK3 (same as RACK1)
RACK4 (same as RACK1)
KEYIN CUE
EFFECT CUE
KEYIN ST IN1L-4R
RACK 5-8 OUT L / R
KEYIN CUE
SELECT
EFFECT CUE
SELECT
DEFINE
MIX
(MAX : 8ch)
KEYIN CH1-32 {48}
PHONES OUT LR
SLOT1
[PHONES]
[SLOT]
[OMNI OUT] (1-16)
[2TR OUT DIGITAL]
STEREO OUT L,R
MONITOR L
MONITOR R
MONITOR MONO (C)
STEREO OUT
STEREO OUT
MIX OUT1-16
MATRIX OUT1-8
MONO (C)
L,R
STEREO OUT MONO (C)
STEREO OUT L,C,R
SLOT2
SLOT3
MIX CASCADE OUT 1-16
CUE CASCADE OUT L,R
DIRECT OUT 1-32 {48}
OUTPUT
PATCH
OUTPUT
PATCH
OUTPUT
PATCH
MIX OUT 1-16
STEREO OUT L,R,MONO (C)
MATRIX OUT 1-8
MONITOR OUT L,R, MONO (C)
MIX INSERT OUT 1-16
STEREO INSERT OUT L,R,MONO (C)
STEREO OUT L,R,MONO (C)
MONITOR OUT L,R,MONO (C)
MIX OUT 1-16
STEEREO OUT L,R,MONO (C)
MONITOR OUT L,R,MONO (C)
MATRIX OUT 1-8
MATRIX OUT 1-8
MIX OUT 1-16
DIRECT OUT 1-32 {48}
MATRIX INSERT OUT 1-8
CH INSERT OUT 1-32 {48}
STEREO CASCADE OUT L,R,MONO (C)
MATRIX CASCADE OUT 1-8
RACK6 (same as RACK5)
RACK7 (same as RACK5)
RACK8 (same as RACK5)
MIX OUT
1-16
MATRIX OUT
1-8
STEREO OUT
L,R,MONO (C)
STEREO
INSERT OUT
L,R,MONO (C)
MATRIX
INSERT OUT
1-8
CH
INSERT OUT
1-32 {48}
MIX
INSERT OUT
1-16
RACK1 IN
RACK2 IN
RACK3 IN
RACK4 IN
RACK5 IN
RACK6 IN
RACK7 IN
RACK8 IN
A (L ) / B (R)
A (L ) / B (R)
A (L) / B (R)
A (L) / B (R)
A (L) / B (R)
A (L) / B (R)
A (L) / B (R)
A (L) / B (R)
METER
METER
METER
METER METER
METER
METER
METER
METER
METER
METER
METER
METER
METER
32 {48}
3
16
8
METER
METER
RACK IN
RACK IN A
RACK IN A RACK OUT A
RACK OUT
RACK OUT B
RACK OUT L
RACK OUT R
RACK IN
RACK IN B
RACK IN L
RACK IN R
RACK IN B
RACK OUT
RACK OUT A
RACK OUT B
31BandGEQ
31BandGEQ
Flex15GEQ
Flex15GEQ
EFFECT
RACK5
EFFECT CUE
32
{48}
To RACKIN PATCH
To OUTPUT PATCH
CH
CH
PRE HPF
(PRE FADER)PFL / (POST ON)AFL/POST PAN L
(PRE FADER)PFL/(POST ON)AFL / POST PAN L
To CHINSERT IN
To MIX INSERT IN
To STEREO INSERT IN
To MATRIX INSERT IN
(PRE FADER)PFL/(POST ON)AFL / POST PAN R
(PRE FADER)PFL / (POST ON)AFL/POST PAN R
INSERT OUT
PRE EQ EQ OUT
DYNA1OUT PRE FADER
KEYIN CUE
PRE FADER
PRE FADER
POST ON
INSERT OUT
POST ON
POST PAN R
POST PAN L
PAN MODE
PAN LINK
MIX1,3...15
MIX2,4...16
MATRIX1,3...7
MATRIX2,4...8
CUE L
CUE R
PRE EQ / PRE FADER / POST ON
PRE EQ / PRE FADER / POST ON
PRE EQ / PRE FADER / POST ON
PRE EQ / PRE FADER / POST ON
DYNA2OUT
PRE EQPRE HPF
Keyin
Self PRE EQ
Self POST EQ
MIX13-16 OUT
CH[1-8,9-16,17-24,25-32]POST EQ {32}
CH[1-8,9-16,17-24,25-32,33-40,41-48]POST EQ{48}
Keyin
Self PRE EQ
Self POST EQ
MIX13-16 OUT
STCH 1L-4R POST EQ
PRE EQ
INSERT OUT
POST EQ
ATT
To MIX
To MIX
To MATRIX
To MATRIX
To MIX
To MIX
VARI
VARI
FIXED
FIXED
STEREO
VARI
STEREO
VARI
STEREO
GATE
DUCK
EXPAND
COMP
COMP
COMPAND
DE-ESSER
HPF
GR METER GR METER
PRE HPF / PRE EQ / PRE FADER / POST ON
INSERT
IN
PATCH
RACK1 OUT
A (L) / B (R)
RACK2 OUT
A (L) / B (R)
RACK3 OUT
A (L) / B (R)
RACK4 OUT
A (L) / B (R)
RACK5 OUT
A(L) / B (R)
RACK6 OUT
A (L) / B (R)
RACK7 OUT
A (L) / B (R)
RACK8 OUT
A (L) / B (R)
STCH 1L-4R
OUTPUTS
ATT
HPF
ON
ON
EQ OUT
DYNA 1OUT
DYNA 2OUT
4BAND
EQ
GATE
DUCK
EXPAND
COMP
COMP
COMPAND
DE-ESSER
Keyin Filter
Keyin Filter
LCR
CSR
MONO (C)
ON
ON
CUE R
CUE L
ON
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To RACKIN PATCH
INSERT POINT
4 BAND
EQ
METER
LEVEL
LEVEL
LEVEL
METERMETER
Keyin
INSERT
LEVEL
METER METER
PRE EQ
PRE EQ
INSERT OUT
INSERT
CUE ON
ST L
PAN
ST R
To RACKIN PATCH
To RACKIN PATCH
To OUTPUT PATCH
CUE TRIM
(INPUT / OUTPUT / DCA)
To OUTPUT PACH
INSERT POIN
GR METER
COMP
COMPAND
EXPAND
DYNA OUT
EQ OUT
LEVEL
BAL
ON
POST ON
POST
ON
4BAND
EQ
PRE EQ
ATT
INSERT
PRE FADER
PRE FADER
PRE FADER
INSERT OUT
METER
INSERT
LEVEL
ON
ON
ON
LEVEL
LEVEL
PAN
PRE EQ
PRE EQ
POST EQ
INSERT
Keyin
PRE FADER
MATRIX1-8 POST EQ
(PRE FADER) PFL / (POST ON) AFL
PRE FADER
INSERT OUT
LEVEL
INSERT
POST
ON
POST ON
ON
PRE EQ
INSERT OUT
CUE ON
MONO
MONO
MONITOR L
CUE LOGIC PHONES
LEVEL LINK
CUE ON
DELAY
(MAX:600ms)
(MAX:600ms)
(MAX:600ms)
(MAX:600ms)
(MAX:600ms)
DELAY
DELAY
DELAY
DELAY
TALKBACK ON
An output port delay becomes invalid by
assigning a monitor out to the output port
+MONO (C)
MONITOR DIMM ON
MONITOR R
MONITOR MONO (C)
CUE L
CUE R
ATT
4BAND
EQ
EQ OUT DYNA OUT
GR METER
PRE FADER
METER
METER
METER
METER
METER
METER
METER METER METER
METER
CUE ON
MATRIX2,4...8
MATRIX1,3...7
PRE EQ POST EQ
METER METER METER
METER
MONO (C)
MATRIX1,3...7
MATRIX2,4...8
PRE EQ
POST EQ
PRE FADER
INSERT OUT
(PRE FADER) PFL / (POST ON) AFL
PRE FADER / POST ON
PRE FADER / POST ON
EQ OUT
GR METER
DYNA OUT
COMP
COMPAND
EXPAND
PRE FADER
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
OSC
L R (C) L R
SLOT 1 1-16
SLOT 2 1-16
SLOT 3 1-16
ON
LCR
TO LCR
TO MONO TO ST
CSR
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
To OUTPUT PATCH
DIRECT OUT 1-32 {48}
INSERT OUT 1-16
INSERT IN 1-16
STEREO
INSERT OUT L,R,MONO (C)
STEREO
INSERT IN L,R,MONO (C)
MATRIX OUT 1-8
STEREO OUT
L,R,MONO (C)
MATRIX
INSERT OUT 1-8
MONITOR
LEVEL
MONITOR
FADER
PHONES L
PHONES R
MONITOR OUT L
MONITOR OUT R
MONITOR OUT MONO (C)
MATRIX
INSERT IN 1-8
MIX OUT1-16
1 2
1516
1 2 7 8
M
O
N
O
MIX CASCADE OUT 1-16
MATRIX CASCADE OUT1-8
CUE CASCADE OUT LR
STEREO CASCADE OUT L,R,MONO (C)
PRE FADER INSERT OUT
POST ON INSERT OUT
PRE EQ INSERT OUT
MIX
MIX
ON
VARI
STEREO
POST ON
POST ONPRE FADER
To MATRIX
PAN MODE
TO ST
TO LCR
LCR
CSR
VARI
To MATRIX
Self PRE EQ / Self POST EQ / MIX13-16 OUT/
MIX(1-8,9-16)POST EQ
ATT
(13-16)To KEYIN
To RACKIN PATCH
To OUTPUT PATCH
To MONITOR SELECT
To OUTPUT PATCH
To MONITOR SELECT
To OUTPUT PATCH
To PHONES OUT
To PHONES OUT
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To MONITOR SELECT
ON
ON
ON
TO MONO
PAN
LR MONO
POST ON
STEREO L,R,MONO(C)
MATRIX 1-8
CUE L
CUE R
POST ON INSERT OUT
PRE FADER INSERT OUT
PRE EQ INSERT OUT
PRE EQ
INSERT OUT
INSERT POINT
PRE FADER INSERT OUT
POST ON INSERT OUT
PRE EQ INSERT OUT
METER
SLOT2OUT
SLOT3OUT
OMINI OUT
2TR OUT
SLOT1OUT
DA
Tip
ST IN1 L,R
ST IN2 L,R
ST IN3 L,R
ST IN4 L,R
ST IN1 L,R
ST IN2 L,R
ST IN3 L,R
ST IN4 L,R
Ring
Sleeve
2
16
16
16
2
2
1
3
16
METER
METER
METER
ATT
DA
DIT
AES / EBU
TRIM
ATT TRIM
ATT TRIM
METER
DELAY
DELAY
(MAX:600ms)
DELAY
DELAY
(MAX:600ms)
DELAY
(MAX:600ms)
(MAX:600ms)
(MAX:600ms)
Keyin
Self PRE EQ / Self POST EQ / MIX13-16 OUT /
ST (L,R,MONO (C)) POST EQ
(PRE FADER) PFL / (POST ON) AFL
PRE FADER / POST ON
PRE FADER / POST ON
To MATRIX
To MATRIX
VARI
STEREO
VARI
COMP
COMPAND
EXPAND
Self PRE EQ / Self POST EQ / MIX13-16 OUT/
DIMMER
MONITOR SELECT
ON
8
···
···
M7CL-48/M7CL-32 V2.0 Block Diagram
INSERT
POST ON
INSERT OUT
INSERT
POST ON
INSERT OUT
INSERT
POST ON
INSERT OUT
This table indicates how the behaviors of each of the input channel and output channel parameters are affected by Stereo, Link, Recall Safe, and User Level settings.
Input Channels
Mix Channels
Matrix Channels
STEREO, MONO Channels
DCA
*1
Linked parameters on ST IN Channels 1-4.
*2Applies to parameters for which the MIX channel 1_16 individual Send Parameter setting and the item in the
table are both enabled.
*3Applies to parameters for which the MATRIX channel 1_8 individual Send Parameter setting and the item in
the table are both enabled.
*4
User operation is allowed if the send-source channel’s “FADER/ON” is ON and the send-destination channel’s
“WITH SEND” is ON.
*5
Linked if the send-destination channel is Stereo.
Mixing parameter operation applicability
Parameter
Stereo
*1
CHANNEL LINK
RECALL SAFE USER LEVEL
Channel
Library
HA
Gain O INPUT HA INPUT HA INPUT HA O
Phase
INPUT HA INPUT HA O
+48V
INPUT HA INPUT HA O
Name, Icon
INPUT NAME INPUT NAME O
Insert
On
INPUT ALL INPUT PROCESSING O
Point
INPUT ALL INPUT PROCESSING O
Direct
Out
On, Level
INPUT ALL INPUT PROCESSING O
Point
INPUT ALL INPUT PROCESSING O
Att O INPUT EQ
INPUT ATT
INPUT PROCESSING O
HPF O INPUT EQ INPUT EQ INPUT PROCESSING O
EQ O INPUT EQ INPUT EQ INPUT PROCESSING O
Dyna
mics1
Key-In Source
INPUT DYNA1 INPUT PROCESSING
Key-In Filter O
INPUT
DYNAMICS1
INPUT DYNA1 INPUT PROCESSING O
Others O
INPUT
DYNAMICS1
INPUT DYNA1 INPUT PROCESSING O
Dyna
mics2
Key-In Source
INPUT DYNA2 INPUT PROCESSING
Others O
INPUT
DYNAMICS2
INPUT DYNA2 INPUT PROCESSING O
To Mix
On O INPUT MIX ON
*2
INPUT MIX ON INPUT FADER/ON
*4
O
Level O
INPUT MIX SEND
*2
INPUT MIX SEND INPUT FADER/ON
*4
O
Pan/Balance O
INPUT MIX SEND INPUT FADER/ON
*4
O
Pre/Post O
INPUT MIX
SEND
*2
INPUT MIX
SEND
INPUT PROCESSING O
To
Matrix
On O
INPUT MATRIX
ON
*3
INPUT MATRIX
ON
INPUT FADER/ON
*4
O
Level O
INPUT MATRIX
SEND
*3
INPUT MATRIX
SEND
INPUT FADER/ON
*4
O
Pan/Balance O
INPUT MATRIX
SEND
INPUT FADER/ON
*4
O
Pre/Post O
INPUT MATRIX
SEND
*3
INPUT MATRIX
SEND
INPUT PROCESSING O
To Stereo/ Mono O
INPUT ALL INPUT PROCESSING O
Pan/ Balance O
INPUT ALL INPUT FADER/ON O
LCR
On O INPUT ALL INPUT PROCESSING O
CSR O
INPUT ALL INPUT PROCESSING O
On O INPUT ON INPUT ON INPUT FADER/ON O
Fader O INPUT FADER INPUT FADER INPUT FADER/ON O
Mute Assign O
INPUT ALL MUTE GROUP ASSIGN O
DCA Assign O
INPUT ALL DCA GROUP ASSIGN O
Cue O
Mute Safe O
Recall Safe O
Fade Time, On O STORE O
Parameter
Linked in
stereo mode
RECALL SAFE USER LEVEL
Channel
Library
Name, Icon
OUUTPUT NAME OUTPUT NAME O
Insert
On O MIX ALL MIX PROCESSING O
Point O MIX ALL MIX PROCESSING O
Att O
MIX ATT
MIX PROCESSING O
EQ O MIX EQ MIX PROCESSING O
Dynamics1
Key-In Source
MIX DYNA1 MIX PROCESSING
Others O MIX DYNA1 MIX PROCESSING O
To Matrix
On O MIX to MATRIX ON MIX FADER/ON
*4
O
Level O
*5
MIX to MATRIX SEND MIX FADER/ON
*4
O
Pan/Balance O MIX to MATRIX SEND MIX FADER/ON
*4
O
Pre/Post O
MIX to MATRIX SEND
MIX PROCESSING O
To Stereo/Mono O MIX ALL MIX PROCESSING O
Pan/Balance O MIX ALL MIX FADER/ON O
LCR
On O MIX ALL MIX PROCESSING O
CSR O MIX ALL MIX PROCESSING O
On O MIX ON MIX FADER/ON O
Fader O MIX FADER MIX FADER/ON O
From Input
On
WITH MIX SEND WITH MIX SEND
*4
Level
WITH MIX SEND WITH MIX SEND
*4
Pan
WITH MIX SEND WITH MIX SEND
*4
Pre/Post
WITH MIX SEND WITH MIX SEND
*4
Mute Assign O MIX ALL MUTE ASSIGN O
Cue O
Mute Safe O
Recall Safe O
Fade Time, On O STORE O
Parameter
Linked in
stereo mode
RECALL SAFE USER LEVEL
Channel
Library
Name, Icon
OUTPUT NAME OUTPUT NAME O
Insert
On O MATRIX ALL MATRIX PROCESSING O
Point O MATRIX ALL MATRIX PROCESSING O
Att O
MATRIX ATT
MATRIX PROCESSING O
EQ O MATRIX EQ MATRIX PROCESSING O
Dynamics1
Key-In Source
MATRIX DYNA1 MATRIX PROCESSING
Others O MATRIX DYNA1 MATRIX PROCESSING O
Balance O MATRIX ALL MATRIX FADER/ON O
On O MATRIX ON MATRIX FADER/ON O
Fader O MATRIX FADER MATRIX FADER/ON O
From Input
From Mix
From Ste-
reo/Mono
On
WITH MATRIX SEND WITH MATRIX SEND
*4
Level
WITH MATRIX SEND WITH MATRIX SEND
*4
Pan
WITH MATRIX SEND WITH MATRIX SEND
*4
Pre/Post
WITH MATRIX SEND WITH MATRIX SEND
*4
Mute Assign O MATRIX ALL MUTE ASSIGN O
Cue O
Mute Safe O
Recall Safe O
Fade Time, On O STORE O
Parameter
Linked on the
STEREO channel
RECALL SAFE USER LEVEL
Channel
Library
Name, Icon
OUTPUT NAME OUTPUT NAME O
Insert
On O STEREO, MONO ALL
STEREO, MONO PRO-
CESSING
O
Point O STEREO, MONO ALL
STEREO, MONO PRO-
CESSING
O
Att O
STEREO, MONO ATT
STEREO, MONO PRO-
CESSING
O
EQ O STEREO, MONO EQ
STEREO, MONO
PROCESSING
O
Dynamics1
Key-In Source
STEREO, MONO
DYNA1
STEREO, MONO PRO-
CESSING
Others O
STEREO, MONO
DYNA1
STEREO, MONO PRO-
CESSING
O
To Matrix
On O
STEREO, MONO to
MATRIX ON
STEREO, MONO FADER/
ON
*4
O
Level O
*5
STEREO, MONO to
MATRIX SEND
STEREO, MONO FADER/
ON
*4
O
Pan/Balance O
STEREO, MONO to
MATRIX SEND
STEREO, MONO FADER/
ON
*4
O
Pre/Post O
STEREO, MONO to
MATRIX SEND
STEREO, MONO PRO-
CESSING
O
Balance O STEREO, MONO ALL
STEREO, MONO FADER/
ON
O
On O STEREO, MONO ON
STEREO, MONO FADER/
ON
O
Fader O STEREO, MONO FADER
STEREO, MONO FADER/
ON
O
Mute Assign O STEREO, MONO ALL MUTE ASSIGN O
Cue O
Mute Safe O
Recall Safe O
Fade Time, On O STORE O
Parameter
RECALL SAFE USER LEVEL
Name, Icon
DCA ALL DCA MASTER ON
On DCA LEVEL/ON DCA MASTER ON
Fader DCA LEVEL/ON DCA MASTER ON
Fade Time, On STORE
Yamaha Pro Audio global web site:
http://www.yamahaproaudio.com/
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
© 2009 Yamaha Corporation
WS66170 906POCP1.3-01A0
Printed in Japan

Transcripción de documentos

Italiano Español Supplementary Manual Français V2.0 EN DE ES FR IT RU Deutsch English m7cl_v2_en.fm Page 2 Thursday, June 25, 2009 5:16 PM This supplementary manual explains mainly the functionality that was changed or added in version 2.0 of the M7CL firmware. Please read this in conjunction with the M7CL V1.1 supplementary manual and the M7CL Owner’s manual. You can download the most recent version of the Help file from the Yamaha website. http://www.yamahaproaudio.com/ ■ Scene memory Main changes • You can now use the Global Paste function to easily modify parameters across multiple scenes (p. 6). ■ Input channel operations • Recall Safe for the attenuator can now be selected independently of EQ (p. 7). • Now the top panel faders can also be used to adjust the send levels from input channels to MATRIX buses (p. 3). ■ Monitor/Cue • In SENDS ON FADER mode, the send-destination MATRIX bus can now be selected by pressing the [MATRIX] navigation key and then pressing a [SEL] key in the Centralogic section (p. 3). • A monitor fader has been added to the monitor output level control, allowing you to use the STEREO MASTER fader / MONO MASTER fader to control the level (p. 5). • The various channel parameters can now be saved together in internal memory as channel library data (p. 3). ■ User settings • M7CL V2 Editor now allows you to make the same user-defined key settings as on the console itself (p. 7). ■ Output channel operations • The various channel parameters can now be saved together in internal memory as channel library data (p. 3). • Additional functions are now available for assignment to the user-defined keys (p. 7). • Regarding compatibility of data you create (p. 7). ■ Input/output patching • You can now select POST ON (immediately after the fader and [ON] key) as the insert or direct output position (p. 4). • When specifying or clearing a GEQ insertion, insert will now be turned on/off automatically (p. 4). ■ EQ and Dynamics • The minimum level for an input channel’s GATE threshold level is now -72 dB (p. 4). ■ Grouping and linking • When you enable channel link, HA gain and fader operations will now be linked while maintaining the level difference between channels (p. 5). 2 m7cl_v2_en.fm Page 3 Thursday, June 25, 2009 5:16 PM Input/output channel library support Using the faders to adjust the send levels to the MATRIX buses (MATRIX ON FADER mode) Until now, EQ and dynamics were managed as individual libraries, but now the channel parameters (including HA settings) can be managed together in units of channels as channel library data, and stored, recalled, or cleared from internal memory. You can recall 200 different settings each from the input channel library and the output channel library. For both input and output libraries, only 000 (Initial Data) is a readonly preset. You can now use the top panel faders to adjust the send levels from input channels not only to MIX buses but also to MATRIX buses. In SENDS ON FADER mode, you can now use the MIX/ MTRX ON FADER button to switch between the MIX buses and MATRIX buses as the send destinations. The basic operations are the same for input channels and output channels. [When MIX ON FADER mode is ON] Using the channel library 1 Use the [SEL] keys to select the channel 1 whose settings you want to manage. 2 2 Press an encoder of the SELECTED CHANNEL section to access the SELECTED CHANNEL VIEW screen. [When MATRIX ON FADER mode is ON] 1 2 3 Press the LIBRARY tool button to access the INPUT CHANNEL LIBRARY window / OUTPUT CHANNEL LIBRARY window. The library window contains the following items. 1 MIX/MTRX ON FADER select button Each time you press this button, you’ll switch between MIX ON FADER mode and MATRIX ON FADER mode. [INPUT CHANNEL LIBRARY] B MIX/MATRIX bus select button Use these buttons to switch the send destination MIX bus or MATRIX bus. The buttons will be joined if two buses are set to stereo. Using the Centralogic section’s [SEL] keys to select a MATRIX bus 3 In SENDS ON FADER mode, the send-destination MATRIX bus can now be selected by pressing the [MATRIX] navigation key and then pressing a [SEL] key in the Centralogic section. 4 3 5 6 m7cl_v2_en.fm Page 4 Thursday, June 25, 2009 5:16 PM [OUTPUT CHANNEL LIBRARY] NOTE • If you recall to a channel that is channel-linked, linking will be cancelled for the recalled channel. 1 POST ON added as an insert / direct out position You can now select POST ON (immediately after the fader and [ON] key) as the insert or direct output position for input/output channels. 2 3 4 5 6 1 CURRENT TYPE (OUTPUT CHANNEL LIBRARY only) Displays the type of channel selected by the [SEL] key. B Library type (OUTPUT CHANNEL LIBRARY only) Displays the type of channel for the library item in the list. NOTE Insert is automatically turned on/off when GEQ insertion is enabled or cancelled • For the output channel library, if the type of channel selected by the [SEL] key differs from the type of channel selected in the list, an indication of “CONFLICT” is shown at the right of CURRENT TYPE. Recall can be executed even if the “CONFLICT” indication is shown, but since the constituent parameters will be different, parameters that do not exist in the library will be set to their default values. If a rack in which a GEQ is mounted is specified as the insert-out or insert-in, the other patch point will automatically be assigned to the same rack. At the same time, insertion is now automatically turned on. Additionally, if you defeat the insert-out or insert-in of a rack in which a GEQ is mounted, the other patch point will automatically be defeated, and insertion will automatically be turned off. C Library list Selects the library item that will be the object of the operation. The selected library item will move to the center, and will be highlighted. D STORE button Stores the settings of the currently selected channel into the selected location of the list. When you press this button, the LIBRARY STORE window will appear, allowing you to name the settings. Changed minimum value of the GATE threshold level The minimum threshold level for an input channel GATE is now -72 dB. E RECALL button Recalls the settings shown in the list into the currently selected channel. F CLEAR button Clears (deletes) the library item selected in the list. When you press this button, a dialog box will ask you to confirm the Clear operation. 4 By turning any one of the multifunction encoders, move the highlighted line in the list to select the library number you want to store, recall, or clear. 5 Press the STORE button, RECALL button, or CLEAR button. The rest of the steps are the same as for other libraries. 4 m7cl_v2_en.fm Page 5 Thursday, June 25, 2009 5:16 PM [MONITOR popup window] Channel link level differences maintained, and can temporarily defeated 1 2 When you enable channel link, HA gain and fader operations will now be linked while maintaining the level difference between channels of the link group. ● Temporarily defeating link For parameters (HA gain and fader) that preserve their relative level differences when linked, you can temporarily defeat linking for all linked channels, for example when you need to adjust the level balance between channels of a link group. Hold down the [SEL] key of the channel whose balance you want to adjust, and operate the parameter that you want to modify. While you’re holding down the [SEL] key, the HA gain and fader will not be linked. (However, temporary unlinking is not possible during the fade that occurs when a scene memory is recalled.) 1 MONITOR FADER LEVEL Indicates the current monitor fader. B FADER ASSIGN MODE button Using the STEREO/MONO MASTER fader to adjust the monitor output level Each time you press this button of the MONITOR popup window, you will alternate between NONE → STEREO → MONO → NONE. If you select STEREO, you’ll be able to use the top panel STEREO MASTER fader to control the monitor fader. You can also use the [ON] key located above the STEREO MASTER fader to turn the monitor output on/off. If you select MONO, you’ll be able to use the top panel MONO MASTER fader to control the monitor fader. You can also use the [ON] key located above the MONO MASTER fader to turn the monitor output on/off. A monitor fader has been added to the monitor output level control, allowing you to use the STEREO MASTER fader / MONO MASTER fader to control the level. You can now also use the [ON] key of the MONO channel and STEREO channel to turn the monitor output on/off. A new MONITOR FADER field has been added in the MONITOR screen and the MONITOR popup window. NOTE [MONITOR screen] • The monitor fader and MONITOR LEVEL knob are located in series. The top panel MONITOR LEVEL knob is still valid even when you’re using this function to adjust the monitor level. The monitor signal will not be output if the MONITOR LEVEL knob is set to the minimum position. 1 • The [ON] key of the STEREO channel or MONO channel will operate in tandem with the MONITOR screen’s OUTPUT button. The PHONES OUT jack will always output the monitor signal, regardless of whether the OUTPUT button is on or off. • You can also assign a user-definable key to switch the FADER ASSIGN MODE setting (p. 7). • The MONITOR button of the function access area is shown in red for STEREO or in yellow for MONO, depending on the FADER ASSIGN MODE setting. 5 m7cl_v2_en.fm Page 6 Thursday, June 25, 2009 5:16 PM Using the Global Paste function to change multiple scenes in a single operation “Global Paste” is a function that lets you copy and paste settings of the desired channel or parameter from the current scene to scene data in memory (multiple selections are allowed). This is a convenient way in which changes to the current scene can be applied to multiple scenes that have already been stored. Using the Global Paste function NOTE • The Global Paste function can be used only by users for whom SCENE LIST STORE/SORT is turned on in their user level settings. All input channel parameters (except INPUT PATCH and INPUT NAME) HA Settings for the head amp assigned to the corresponding input channel ATT Attenuator EQ EQ settings DYNA1 Dynamics 1 settings (including KEY IN SOURCE and KEY IN FILTER) DYNA2 Dynamics 2 settings (including KEY IN SOURCE) MIX ON/ SEND Send to MIX bus on/off, send level, pan, and PRE/POST MTRX ON/ SEND Send to MATRIX bus on/off, send level, pan, and PRE/POST FADER Fader level CH ON [ON] key on/off status ● OUTPUT tab Select the output channel in the upper left, and its parameters in the lower left. You can select the following parameters. 1 In the function access area, press the SCENE field to access the SCENE LIST window. 2 ALL ALL All output channel parameters (except OUTPUT PATCH and OUTPUT NAME) ATT Attenuator In the lower right of the SCENE LIST window, press the GLOBAL PASTE button to access the GLOBAL PASTE window. EQ EQ settings DYNA1 Dynamics 1 settings (including KEY IN SOURCE and KEY IN FILTER) In this screen you can select the copy-source channels/ parameters and specify the paste-destination scene data. MATRIX ON Send to MATRIX bus on/off (only for MIX and STEREO/MONO channels) MATRIX SEND Send level to MATRIX bus, pan, PRE/ POST (only for MIX and STEREO/MONO channels) FADER Fader level CH ON [ON] key on/off status WITH MIX SEND Selects whether the send level sent from input channels to the selected MIX bus will be included in the pasted data. WITH MATRIX SEND Selects whether the send level sent from input channels to the selected MATRIX bus will be included in the pasted data. ● RACK tab Select RACK 1–8. ● PATCH/NAME tab Select from INPUT PATCH, INPUT NAME, OUTPUT PATCH, and OUTPUT NAME. 5 In the DESTINATION SCENE area, select the 3 Use the tabs to select the items to be cop- range of paste-destination scenes. ied from the following choices. INPUT Input channels and parameters OUTPUT Output channels and parameters RACK RACK 1–8 PATCH/NAME Input/output patching and channel names The data will be pasted to all scenes in the range between FROM and TO. Use multi-function encoder 7 to select FROM, and multi-function encoder 8 to select TO. 6 Press the PASTE button. 4 Select the copy-source channels and The selected items of the current scene will be pasted to the scene(s) in memory. A progress bar will be shown while the Paste operation is being performed. The STOP button is shown while the Paste function is being executed; you can stop by pressing this button. In this case, the Paste function will have been partially executed, and the data cannot be restored to its previous state. parameters. The display will depend on the tab you selected. You cannot select different parameters for each channel. Use the top panel [SEL] keys to select a channel. ● INPUT tab Select the input channel in the upper left, and its parameters in the lower left. You can select the following parameters. 6 m7cl_v2_en.fm Page 7 Thursday, June 25, 2009 5:16 PM Functions that can be assigned to user-defined keys Recall Safe settings made independently for the attenuator Recall Safe for the attenuator can now be selected independently of EQ. Function MONITOR ON MASTER (FADER ASSIGN MODE) PARAMETER 1 STEREO MASTER MONO MASTER SENDS ON FADER In addition, the stereo, LINK, RECALL SAFE, and USER LEVEL behavior of other mixing parameters has also been changed. For details, refer to the "Mixing parameter operation applicability" on the back of the included block diagram. Assigning user-defined keys from M7CL V2 Editor M7CL V2 Editor now allows you to make the same userdefined key settings as on the console itself. For details on how to make these settings, refer to the M7CL V2 Editor Owner’s manual. MATRIX 1-8 PARAMETER 2 Explanation LATCH The key will switch whether the STEREO MASTER fader will be used to control the monitor level UNLATCH The STEREO MASTER fader will be used to control the monitor level while the key is held down LATCH The key will switch whether the MONO MASTER fader will be used to control the monitor level UNLATCH The MONO MASTER fader will be used to control the monitor level while the key is held down – Switches the MATRIX ON FADER function on/ off for the selected MATRIX MIX ON FADER – Switches the MIX ON FADER function on/off MATRIX ON FADER – Switches the MATRIX ON FADER function on/ off SENDS ON FADER – Switches the SENDS ON FADER function on/off M7CL EDITOR CONTROL LIBRARY HOME SELECTED CH VIEW OVERVIEW INPUT CH Opens the M7CL V2 Editor’s Library window INPUT CH tab OUTPUT CH Opens the M7CL V2 Editor’s Library window OUTPUT CH tab – Displays the SELECTED CHANNEL VIEW screen – Displays the OVERVIEW screen – Each press of the key will alternately display the SELECTED CHANNEL VIEW screen and the OVERVIEW screen MOMENTARY Compatibility of created data Data created with firmware 2.0 (scenes, library data, setup data, etc.) cannot be loaded into an M7CL console that is using firmware V1 (any version prior to V2.0). However, data created on an M7CL with firmware V1 can be loaded into an M7CL that is using firmware V2.0. 7 m7cl_v2_en_cover4.fm Page 1 Thursday, June 25, 2009 5:16 PM EN Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. DE Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten benutzte elektrische Geräte nicht mit dem normalen Haushaltsabfall entsorgt werden. In Übereinstimmung mit Ihren nationalen Bestimmungen und den Richtlinien 2002/96/EC, bringen Sie alte Geräte bitte zur fachgerechten Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen. Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle Ressourcen zu schützen und verhindern mögliche negative Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Müllentsorgung auftreten könnten. Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte, kontaktieren Sie bitte Ihre örtliche Stadtoder Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel. [Information für geschäftliche Anwender in der Europäischen Union] Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren Händler oder Zulieferer für weitere Informationen. [Entsorgungsinformation für Länder außerhalb der Europäischen Union] Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausrangieren möchten, kontaktieren Sie bitte Ihre örtlichen Behörden oder Ihren Händler und fragen Sie nach der sachgerechten Entsorgungsmethode. m7cl_v2_en_cover4.fm Page 2 Thursday, June 25, 2009 5:16 PM FR Information concernant la Collecte et le Traitement des déchets d’équipements électriques et électroniques. Le symbole sur les produits, l’emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels. Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques, veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives 2002/96/EC. En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauvegarde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors d’un traitement inapproprié des déchets. Pour plus d’informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques, veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les produits. [Pour les professionnels dans l’Union Européenne] Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques veuillez contacter votre vendeur ou fournisseur pour plus d’informations. [Information sur le traitement dans d’autres pays en dehors de l’Union Européenne] Ce symbole est seulement valables dans l’Union Européenne. Si vous souhaitez vous débarrasser de déchets d’équipements électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement appropriée. ES Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usados no deben ser mezclados con desechos hogareños corrientes. Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de acuerdo a su legislación nacional y las directivas 2002/96/EC. Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto negativo sobre la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos. Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio de gestión de residuos o el punto de venta en el cual usted adquirió los artículos. [Para usuarios de negocios en la Unión Europea] Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor para mayor información. [Información sobre la Disposición en otros países fuera de la Unión Europea] Este símbolo sólo es válidos en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autoridades locales y pregunte por el método correcto de disposición. IT Informazioni per gli utenti sulla raccolta e lo smaltimento di vecchia attrezzatura Questo simbolo sui prodotti, sull’imballaggio, e/o sui documenti che li accompagnano significa che i prodotti elettriche e elettroniche non dovrebbero essere mischiati con i rifiuti domestici generici. Per il trattamento, recupero e riciclaggio appropriati di vecchi prodotti, li porti, prego, ai punti di raccolta appropriati, in accordo con la Sua legislazione nazionale e le direttive 2002/96/CE. Smaltendo correttamente questi prodotti, Lei aiuterà a salvare risorse preziose e a prevenire alcuni potenziali effetti negativi sulla salute umana e l’ambiente, che altrimenti potrebbero sorgere dal trattamento improprio dei rifiuti. Per ulteriori informazioni sulla raccolta e il riciclaggio di vecchi prodotti, prego contatti la Sua amministrazione comunale locale, il Suo servizio di smaltimento dei rifiuti o il punto vendita dove Lei ha acquistato gli articoli. [Per utenti imprenditori dell’Unione europea] Se Lei desidera disfarsi di attrezzatura elettrica ed elettronica, prego contatti il Suo rivenditore o fornitore per ulteriori informazioni. [Informazioni sullo smaltimento negli altri Paesi al di fuori dell’Unione europea] Questo simbolo è validi solamente nell’Unione europea. Se Lei desidera disfarsi di questi articoli, prego contatti le Sue autorità locali o il rivenditore e richieda la corretta modalità di smaltimento. M O MIX 1 2 ··· 1516 ■ M7CL-48/M7CL-32 V2.0 Block Diagram N ST O MATRIX CUE L R (C) 1 2 ··· 7 8 CASCADE OUT L R MIX CASCADE OUT 1-16 To OUTPUT PATCH To OUTPUT PATCH CASCADE IN To OUTPUT PATCH To OUTPUT PATCH STEREO CASCADE OUT L,R,MONO (C) SLOT 1 1-16 SLOT 2 1-16 SLOT 3 1-16 CASCADE IN SELECT +48V MASTER ON HA METER 2 TALKBACK INPUT TB AD 3 INPUT 1-32 {48} TALKBACK GAIN ON INPUT SELECT MIX 1-16 OSCILLATOR OSC METER LEVEL HA +48V [INPUT] [1-32 {48}] INPUT 1 METER 2 AD 3 Sine Wave Pink Noise Burst Noise INPUT PATCH GAIN/TRIM CH INSERT OUT 1-32 {48} CH INSERT IN 1-32 {48} HA +48V [ST IN] [1L-4R] GAIN/TRIM +48V HA METER 2 ST IN R INSERT POINT POST ON INSERT OUT PRE FADER INSERT OUT PRE EQ INSERT OUT AD 1 3 HPF 32 {48} INSERT ATT 4BAND EQ PRE HPF PRE EQ POST EQ PRE EQ INSERT OUT Keyin Self PRE EQ Self POST EQ MIX13-16 OUT CH[1-8,9-16,17-24,25-32]POST EQ {32} CH[1-8,9-16,17-24,25-32,33-40,41-48]POST EQ{48} GAIN/TRIM To CASCADE IN SELECT DYNA1OUT EQ OUT DYNA2OUT METER METER METER GR METER GR METER PRE EQ METER PRE HPF METER ST IN 1L-4R To MONITOR SELECT GATE COMP DUCK COMPAND EXPAND DE-ESSER COMP KEYIN CUE Keyin Filter To MIX [SLOT] SLOT1 1-16 16 SLOT2 1-16 To MIX SLOT3 16 SLOT3 1-16 PRE EQ / PRE FADER / POST ON MATRIX OUT 1-8 STEREO OUT L,R,MONO (C) RACK2 IN A (L ) / B (R) HPF ATT PRE HPF 4BAND EQ PRE EQ POST EQ Keyin Self PRE EQ Self POST EQ MIX13-16 OUT STCH 1L-4R POST EQ POST ON 31BandGEQ RACK2 OUT A (L) / B (R) ST R ON LEVEL ON LEVEL ON LEVEL PAN MATRIX2,4...8 LEVEL PAN STEREO INSERT OUT L,R,MONO (C) MATRIX INSERT OUT 1-8 METER RACK OUT L METER RACK OUT R EFFECT RACK5 IN A (L) / B (R) RACK6 IN A (L) / B (R) EFFECT CUE RACK6 (same as RACK5) RACK5 OUT A(L) / B (R) RACK6 OUT A (L) / B (R) RACK7 IN A (L) / B (R) RACK7 (same as RACK5) RACK7 OUT A (L) / B (R) RACK8 IN A (L) / B (R) RACK8 (same as RACK5) RACK8 OUT A (L) / B (R) VARI PRE FADER / POST ON To MATRIX VARI STEREO PAN LR MONO PAN MODE TO ST TO MONO LCR POST ON PRE EQ METER INSERT EQ OUT DYNA OUT METER METER GR METER ATT COMP COMPAND EXPAND 4BAND EQ PRE EQ POST EQ PRE EQ INSERT OUT CUE L CUE R PRE FADER METER LEVEL/ DCA 1-8 GATE COMP DUCK COMPAND EXPAND DE-ESSER COMP KEYIN CUE Keyin Filter To MIX POST PAN L POST PAN R LR MONO TO MONO TO ST POSTON METER ON POST ON METER PRE FADER METER LEVEL BAL STEREO OUT L,R,MONO (C) ON INSERT INSERT POST ON INSERT OUT PRE FADER INSERT OUT PRE FADER Keyin Self PRE EQ / Self POST EQ / MIX13-16 OUT / ST (L,R,MONO (C)) POST EQ To OUTPUT PATCH To MONITOR SELECT POST ON CUE ON MATRIX1,3...7 PAN MODE MONO (C) TO LCR LCR 32 {48} MIX INSERT IN 1-16 16 ON ON PRE FADER / POST ON PAN To MATRIX VARI STEREO MATRIX 1-8 To RACKIN PATCH To OUTPUT PATCH MATRIX INSERT OUT 1-8 PAN LINK ON MIX 1,3... 15 ON MIX 2,4... 16 MATRIX INSERT IN 1-8 ON POST PAN L ON POST PAN R ON LEVEL ON LEVEL To MIX ON LEVEL BAL ON LEVEL MATRIX1,3...7 ON LEVEL MATRIX2,4...8 ON LEVEL BAL PRE EQ / PRE FADER / POST ON PRE EQ / PRE FADER / POST ON ON LEVEL LEVEL PRE FADER / POST ON To MATRIX VARI POST ON VARI (PRE FADER)PFL/(POST ON)AFL / POST PAN R ON CSR PRE FADER POST ON (PRE FADER)PFL/(POST ON)AFL / POST PAN L MATRIX2,4...8 ST L LEVEL ST R FIXED PRE EQ / PRE FADER / POST ON INSERT POINT POST ON INSERT OUT PRE FADER INSERT OUT PRE EQ INSERT OUT PRE EQ METER INSERT ATT EQ OUT DYNA OUT METER METER GR METER 4BAND EQ PRE EQ POST EQ PRE EQ INSERT OUT CUE ON COMP COMPAND EXPAND PRE FADER METER POST ON METER LEVEL ON MATRIX OUT 1-8 INSERT INSERT PRE FADER PRE FADER INSERT OUT Keyin Self PRE EQ / Self POST EQ / MIX13-16 OUT/ MATRIX1-8 POST EQ POST ON INSERT OUT To OUTPUT PATCH To MONITOR SELECT POST ON (PRE FADER) PFL / (POST ON) AFL CUE L CUE TRIM (INPUT / OUTPUT / DCA) CUE R KEYIN CUE KEYIN CH1-32 {48} KEYIN ST IN1L-4R KEYIN CUE SELECT ON RACK 5-8 OUT L / R EFFECT CUE SELECT ON EFFECT CUE To CHINSERT IN MONO METER CUE L METER CUE R CUE R To MIX INSERT IN STEREO INSERT IN L,R,MONO (C) To STEREO INSERT IN MATRIX INSERT IN 1-8 To MATRIX INSERT IN CUE ON CUE LOGIC ST IN1 L,R DIRECT OUT 1-32 {48} MIX OUT 1-16 STEREO OUT L,R,MONO (C) MATRIX OUT 1-8 MONITOR OUT L,R, MONO (C) CH INSERT OUT 1-32 {48} MIX INSERT OUT 1-16 STEREO INSERT OUT L,R,MONO (C) MATRIX INSERT OUT 1-8 PHONES LEVEL LINK ST IN2 L,R ST IN3 L,R ST IN4 L,R MIX CASCADE OUT 1-16 STEREO CASCADE OUT L,R,MONO (C) MATRIX CASCADE OUT 1-8 CUE CASCADE OUT L,R Flex15GEQ To MATRIX TO LCR STEREO INSERT IN L,R,MONO (C) OUTPUTS METER RACK IN L METER RACK IN R PRE FADER / POST ON STEREO L,R,MONO(C) METER RACK OUT METER RACK OUT A METER RACK OUT B POST ON To RACKIN PATCH INSERT POIN To OUTPUT PACH STEREO POST ON INSERT OUT PRE FADER INSERT OUT INSERT OUT L,R,MONO (C) PRE EQ INSERT OUT 31BandGEQ METER RACK IN A METER RACK IN B POST ON INSERT OUT CSR 8 MIX INSERT OUT 1-16 ON CUE L 3 METER RACK IN LEVEL PAN MONO (C) LEVEL VARI STEREO ON CH INSERT IN 1-32 {48} RACK5 CH INSERT OUT 1-32 {48} ON MIX2,4...16 ON To MATRIX RACK1 OUT A (L) / B (R) RACK4 OUT A (L) / B (R) LEVEL MIX1,3...15 VARI METER RACK OUT A METER RACK OUT B RACK4 (same as RACK1) MATRIX2,4...8 ON To MATRIX PRE EQ / PRE FADER / POST ON RACK4 IN A (L) / B (R) ON ON VARI STEREO RACK3 OUT A (L) / B (R) LEVEL ST L PAN LINK ON PRE EQ / PRE FADER / POST ON To MIX METER RACK OUT RACK3 (same as RACK1) MATRIX1,3...7 CSR To MATRIX DYNA1OUT EQ OUT DYNA 2OUT METER METER METER GR METER GR METER PRE EQ METER PRE HPF METER RACK1 RACK3 IN A (L) / B (R) PRE FADER INSERT OUT PRE FADER Keyin Self PRE EQ / Self POST EQ / MIX13-16 OUT/ MIX(1-8,9-16)POST EQ (13-16)To KEYIN To RACKIN PATCH To OUTPUT PATCH To MONITOR SELECT MIX OUT1-16 ST R MATRIX1,3...7 To MIX RACK2 (same as RACK1) INSERT (PRE FADER) PFL / (POST ON) AFL RACK Flex15GEQ ON INSERT (PRE FADER) PFL / (POST ON) AFL ST L MONO (C) LEVEL FIXED STEREO RACK1 IN A (L ) / B (R) CUE ON BAL STCH 1L-4R SLOT1 1-16 SLOT2 1-16 SLOT3 1-16 MIX OUT 1-16 PAN MODE ON (PRE FADER)PFL / (POST ON)AFL/POST PAN R INSERT IN PATCH METER RACK IN A METER RACK IN B PRE EQ POST EQ PRE EQ INSERT OUT To MATRIX PRE EQ / PRE FADER / POST ON VARI ON COMP COMPAND EXPAND 4 BAND EQ LEVEL ON PRE EQ / PRE FADER / POST ON (PRE FADER)PFL / (POST ON)AFL/POST PAN L ATT POST ON METER PRE FADER METER ON POST PAN R VARI STEREO ON DYNA OUT EQ OUT METER METER GR METER PRE EQ METER To OUTPUT PATCH TO LCR LCR POST ON INSERT OUT VARI STEREO 8 METER RACK IN PRE FADER PRE FADER INSERT OUT VARI RACK1 OUT A (L) / B (R) RACK2 OUT A (L) / B (R) RACK3 OUT A (L) / B (R) RACK4 OUT A (L) / B (R) RACK5 OUT A (L) / B (R) RACK6 OUT A (L) / B (R) RACK7 OUT A (L) / B (R) RACK8 OUT A (L) / B (R) RACK IN PATCH ON INSERT POST PAN L To MIX SLOT2 DIRECT OUT 1-32 {48} LEVEL POST PAN L POST PAN R POST ON METER LR MONO TO MONO TO ST INSERT POST ON To MIX 16 PRE FADER METER LEVEL/ DCA1-8 FIXED FIXED STEREO SLOTIN SLOTIN SLOTIN METER METER METER SLOT1 ON PRE HPF / PRE EQ / PRE FADER / POST ON PAN METER AD 3 MIX INSERT IN 1-16 HPF LPF INSERT To RACKIN PATCH To OUTPUT PATCH 2 ON INPUT 1-32 {48} CH 1-32 {48} ST IN L 1 INSERT POINT To RACKIN PATCH POST ON INSERT OUT To OUTPUT PATCH MIX PRE FADER INSERT OUT INSERT OUT 1-16 PRE EQ INSERT OUT Tip PHONES OUT LR Ring DA 2 Sleeve [PHONES] ST IN1 L,R ST IN2 L,R ST IN3 L,R ST IN4 L,R PHONES LEVEL OUTPUT PATCH ATT DELAY METER DELAY SLOT1 16 METER SLOT2OUT METER SLOT3OUT (MAX:600ms) SLOT3 16 DIRECT OUT 1-32 {48} MIX OUT 1-16 STEREO OUT L,R,MONO (C) MATRIX OUT 1-8 MONITOR OUT L,R,MONO (C) OUTPUT PATCH DELAY (MAX:600ms) METER OMINI OUT MIX OUT 1-16 STEEREO OUT L,R,MONO (C) MATRIX OUT 1-8 MONITOR OUT L,R,MONO (C) OUTPUT PATCH DELAY (MAX:600ms) METER ATT [SLOT] SLOT2 16 (MAX:600ms) DELAY TRIM SLOT1OUT (MAX:600ms) TRIM 2 DA 1 16 ATT 3 [OMNI OUT] (1-16) TRIM 2TR OUT 2 DIT AES / EBU STEREO OUT L,R STEREO OUT MONO (C) STEREO OUT L,C,R [2TR OUT DIGITAL] STEREO OUT L,R STEREO OUT MONO (C) MIX OUT1-16 MATRIX OUT1-8 DEFINE MIX (MAX : 8ch) DELAY (MAX:600ms) DELAY (MAX:600ms) MONITOR SELECT TALKBACK 1 INPUT To OUTPUT PATCH To OUTPUT PATCH To OUTPUT PATCH To OUTPUT PATCH CUE CASCADE OUT LR +48V [TALKBACK INPUT] To OUTPUT PATCH To OUTPUT PATCH MONO MONITOR L METER MONITOR L MONITOR R METER MONITOR R MONITOR MONO (C) METER MONITOR MONO (C) DIMMER +48V MATRIX CASCADE OUT1-8 To OUTPUT PATCH To OUTPUT PATCH To OUTPUT PATCH ON TALKBACK ON MONITOR DIMM ON MONITOR MONITOR LEVEL FADER +MONO (C) PHONES L To PHONES OUT PHONES R To PHONES OUT DELAY (MAX:600ms) MONITOR OUT L DELAY (MAX:600ms) MONITOR OUT R DELAY (MAX:600ms) MONITOR OUT MONO (C) An output port delay becomes invalid by assigning a monitor out to the output port To OUTPUT PATCH To OUTPUT PATCH To OUTPUT PATCH m7cl_mixing_parameter.fm Page 1 Friday, June 19, 2009 11:33 AM Mixing parameter operation applicability This table indicates how the behaviors of each of the input channel and output channel parameters are affected by Stereo, Link, Recall Safe, and User Level settings. ■ Input Channels Parameter Gain HA ■ Mix Channels Stereo *1 O CHANNEL LINK INPUT HA Direct Out USER LEVEL Channel Library OUTPUT NAME O MIX ALL MIX PROCESSING O +48V INPUT HA INPUT HA O O MIX ALL MIX PROCESSING O INPUT NAME INPUT NAME O Att O MIX ATT MIX PROCESSING O On INPUT ALL INPUT PROCESSING O EQ O MIX EQ MIX PROCESSING O Point INPUT ALL INPUT PROCESSING O MIX DYNA1 MIX PROCESSING On, Level INPUT ALL INPUT PROCESSING O Point INPUT ALL INPUT PROCESSING O INPUT EQ INPUT ATT INPUT PROCESSING O INPUT EQ INPUT PROCESSING O EQ O INPUT EQ INPUT EQ INPUT PROCESSING O INPUT DYNA1 INPUT PROCESSING Key-In Source Key-In Filter O INPUT DYNAMICS1 INPUT DYNA1 INPUT PROCESSING O Others O INPUT DYNAMICS1 INPUT DYNA1 INPUT PROCESSING O INPUT DYNA2 INPUT PROCESSING INPUT DYNA2 INPUT PROCESSING O INPUT FADER/ON *4 O Key-In Source INPUT DYNAMICS2 Others O On O INPUT MIX ON *2 INPUT MIX ON Level O INPUT MIX SEND Pan/Balance O *2 INPUT MIX SEND INPUT FADER/ON *4 O INPUT MIX SEND INPUT FADER/ON *4 O On Insert Point Dynamics1 Others O MIX DYNA1 MIX PROCESSING O On O MIX to MATRIX ON MIX FADER/ON *4 O Level O *5 MIX to MATRIX SEND MIX FADER/ON *4 O Pan/Balance O MIX to MATRIX SEND MIX FADER/ON *4 O Pre/Post O MIX to MATRIX SEND MIX PROCESSING O To Stereo/Mono O MIX ALL MIX PROCESSING O Pan/Balance O MIX ALL MIX FADER/ON O On O MIX ALL MIX PROCESSING O CSR O MIX ALL MIX PROCESSING O On O MIX ON MIX FADER/ON O Fader O MIX FADER MIX FADER/ON O On WITH MIX SEND WITH MIX SEND *4 Level WITH MIX SEND WITH MIX SEND *4 Pan WITH MIX SEND WITH MIX SEND *4 WITH MIX SEND WITH MIX SEND *4 MIX ALL MUTE ASSIGN To Matrix LCR From Input Pre/Post INPUT PROCESSING O ■ Matrix Channels Parameter INPUT ALL INPUT PROCESSING O INPUT ALL INPUT PROCESSING O On O INPUT ON INPUT ON INPUT FADER/ON O Fader O INPUT FADER INPUT FADER INPUT FADER/ON O Mute Assign O INPUT ALL MUTE GROUP ASSIGN O DCA Assign O INPUT ALL DCA GROUP ASSIGN O Cue O Mute Safe O Recall Safe O Fade Time, On O STORE O STEREO, MONO EQ STEREO, MONO PROCESSING O STEREO, MONO DYNA1 STEREO, MONO PROCESSING O STEREO, MONO DYNA1 STEREO, MONO PROCESSING O On O STEREO, MONO to MATRIX ON STEREO, MONO FADER/ ON *4 O Level O *5 STEREO, MONO to MATRIX SEND STEREO, MONO FADER/ ON *4 O Pan/Balance O STEREO, MONO to MATRIX SEND STEREO, MONO FADER/ ON *4 O Pre/Post O STEREO, MONO to MATRIX SEND STEREO, MONO PROCESSING O Balance O STEREO, MONO ALL STEREO, MONO FADER/ ON O On O STEREO, MONO ON STEREO, MONO FADER/ ON O O STEREO, MONO FADER/ STEREO, MONO FADER ON O STEREO, MONO ALL MUTE ASSIGN O STORE O Key-In Source Dynamics1 Others To Matrix O INPUT MATRIX SEND O O O O O EQ Fade Time, On INPUT FADER/ON *4 CSR O O INPUT MATRIX SEND On STEREO, MONO PROCESSING Recall Safe O O STEREO, MONO ATT Mute Safe INPUT FADER/ON *4 O O O INPUT MATRIX SEND INPUT FADER/ON Att Fade Time, On INPUT MATRIX SEND *3 INPUT PROCESSING O O O INPUT ALL STEREO, MONO PROCESSING O Level INPUT ALL STEREO, MONO ALL Cue O O O Mute Assign INPUT FADER/ON *4 O Point Insert O INPUT MATRIX ON To Stereo/ Mono O O INPUT MATRIX ON *3 Pan/ Balance O STEREO, MONO PROCESSING Recall Safe O O OUTPUT NAME STEREO, MONO ALL Mute Safe On Linked in stereo mode Name, Icon Insert On O Point STORE RECALL SAFE USER LEVEL O O Channel Library OUTPUT NAME OUTPUT NAME O MATRIX ALL MATRIX PROCESSING O O MATRIX ALL MATRIX PROCESSING O Att O MATRIX ATT MATRIX PROCESSING O EQ O MATRIX EQ MATRIX PROCESSING O MATRIX DYNA1 MATRIX PROCESSING Dynamics1 Key-In Source Others O MATRIX DYNA1 MATRIX PROCESSING O Balance O MATRIX ALL MATRIX FADER/ON O On O MATRIX ON MATRIX FADER/ON O O Fader From Input From Mix From Stereo/Mono MATRIX FADER MATRIX FADER/ON On O WITH MATRIX SEND WITH MATRIX SEND *4 Level WITH MATRIX SEND WITH MATRIX SEND *4 Pan WITH MATRIX SEND WITH MATRIX SEND *4 Pre/Post WITH MATRIX SEND WITH MATRIX SEND *4 MATRIX ALL MUTE ASSIGN O STORE O Mute Assign O Cue O Mute Safe O Recall Safe O Fade Time, On O Channel Library OUTPUT NAME Fader O USER LEVEL O O INPUT PROCESSING RECALL SAFE On Name, Icon Cue INPUT MIX SEND INPUT MATRIX SEND *3 Linked on the STEREO channel O INPUT MIX SEND *2 O Parameter Mute Assign O Pan/Balance O Key-In Source Pre/Post Pre/Post LCR OUUTPUT NAME O O INPUT EQ To Matrix Channel Library INPUT HA O To Mix USER LEVEL INPUT HA O Name, Icon RECALL SAFE INPUT HA Att Dyna mics2 Linked in stereo mode INPUT HA HPF Dyna mics1 Parameter Phase Name, Icon Insert RECALL SAFE ■ STEREO, MONO Channels ■ DCA Parameter RECALL SAFE USER LEVEL Name, Icon DCA ALL DCA MASTER ON On DCA LEVEL/ON DCA MASTER ON Fader DCA LEVEL/ON Fade Time, On DCA MASTER ON STORE *1Linked parameters on ST IN Channels 1-4. *2Applies to parameters for which the MIX channel 1_16 individual Send Parameter setting and the item in the table are both enabled. *3Applies to parameters for which the MATRIX channel 1_8 individual Send Parameter setting and the item in the table are both enabled. *4User operation is allowed if the send-source channel’s “FADER/ON” is ON and the send-destination channel’s “WITH SEND” is ON. *5Linked if the send-destination channel is Stereo. Yamaha Pro Audio global web site: http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2009 Yamaha Corporation WS66170 906POCP1.3-01A0 Printed in Japan
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Yamaha V2 Manual de usuario

Categoría
Equipo musical
Tipo
Manual de usuario
Este manual también es adecuado para