Yamaha S30 El manual del propietario

Categoría
Sintetizador
Tipo
El manual del propietario

Este manual también es adecuado para

ENGLISHDEUTSCHFRANÇAISESPAÑOL
EN
DE
FR
ES
DIGITAL PIANO
YDP-S30
Owner's Manual
Bedienungsanleitung
Mode d'emploi
Manual de instrucciones
For information on assembling the keyboard stand, refer to the
instructions on pages 34-36 of this manual.
Weitere Informationen über die Montage des Keyboard-Ständers erhalten
Sie in den Anweisungen auf den Seiten 34-36 dieses Handbuchs.
Pour obtenir les détails sur l'assemblage du pupitre du clavier,
reportez-vous aux instructions figurant aux pages 34-36 de ce manuel.
Para información sobre el montaje del soporte del teclado, consulte
las instrucciones en las páginas 34-36 de este manual.
PLEASE KEEP THIS MANUAL
This product utilizes batteries or an external power supply (adapter). DO
NOT connect this product to any power supply or adapter other than one
described in the manual, on the name plate, or specifically recom-
mended by Yamaha.
WARNING: Do not place this product in a position where anyone could
walk on, trip over, or roll anything over power or connecting cords of any
kind. The use of an extension cord is not recommended! If you must use
an extension cord, the minimum wire size for a 25’ cord (or less) is 18
AWG. NOTE: The smaller the AWG number, the larger the current han-
dling capacity. For longer extension cords, consult a local electrician.
This product should be used only with the components supplied or; a
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is
used, please observe all safety markings and instructions that accom-
pany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at the
time of printing. However, Yamaha reserves the right to change or modify
any of the specifications without notice or obligation to update existing
units.
This product, either alone or in combination with an amplifier and head-
phones or speaker/s, may be capable of producing sound levels that
could cause permanent hearing loss. DO NOT operate for long periods
of time at a high volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should consult an
audiologist.
IMPORTANT: The louder the sound, the shorter the time period before
damage occurs.
Some Yamaha products may have benches and / or accessory mounting
fixtures that are either supplied with the product or as optional accesso-
ries. Some of these items are designed to be dealer assembled or
installed. Please make sure that benches are stable and any optional fix-
tures (where applicable) are well secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No other
uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how a
function or effect works (when the unit is operating as designed) are not
covered by the manufacturer’s warranty, and are therefore the owners
responsibility. Please study this manual carefully and consult your dealer
before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and environ-
mentally friendly. We sincerely believe that our products and the produc-
tion methods used to produce them, meet these goals. In keeping with
both the letter and the spirit of the law, we want you to be aware of the
following:
Battery Notice:
This product MAY contain a small non-rechargeable battery which (if
applicable) is soldered in place. The average life span of this type of bat-
tery is approximately five years. When replacement becomes necessary,
contact a qualified service representative to perform the replacement.
This product may also use “household” type batteries. Some of these
may be rechargeable. Make sure that the battery being charged is a
rechargeable type and that the charger is intended for the battery being
charged.
When installing batteries, do not mix batteries with new, or with batteries
of a different type. Batteries MUST be installed correctly. Mismatches or
incorrect installation may result in overheating and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all batter-
ies away from children. Dispose of used batteries promptly and as regu-
lated by the laws in your area. Note: Check with any retailer of
household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some reason
its useful life is considered to be at an end, please observe all local,
state, and federal regulations that relate to the disposal of products that
contain lead, batteries, plastics, etc. If your dealer is unable to assist
you, please contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The model num-
ber, serial number, power requirements, etc., are located on this plate.
You should record the model number, serial number, and the date of pur-
chase in the spaces provided below and retain this manual as a perma-
nent record of your purchase.
Model
Serial No.
Purchase Date
SPECIAL MESSAGE SECTION
92-BP (bottom)
(3)-10
YDP-S30 Owner’s Manual
3
ENGLISH
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Only use the voltage specified as correct for the instrument. The required
voltage is printed on the name plate of the instrument.
Use the specified adaptor (PA-5D, PA-150 or an equivalent recommended by
Yamaha) only. Using the wrong adaptor can result in damage to the instrument
or overheating.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
Do not place the AC adaptor cord near heat sources such as heaters or radiators,
and do not excessively bend or otherwise damage the cord, place heavy objects
on it, or place it in a position where anyone could walk on, trip over, or roll
anything over it.
Do not open the instrument or attempt to disassemble the internal parts or
modify them in any way. The instrument contains no user-serviceable parts. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill into
any openings.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
If the AC adaptor cord or plug becomes frayed or damaged, or if there is a
sudden loss of sound during use of the instrument, or if any unusual smells or
smoke should appear to be caused by it, immediately turn off the power switch,
disconnect the adaptor plug from the outlet, and have the instrument inspected
by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord.
Unplug the AC power adaptor when not using the instrument, or during
electrical storms.
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or
heat (such as in direct sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration or damage to the internal
components.
Do not use the instrument in the vicinity of a TV, radio, stereo equipment,
mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio
may generate noise.
Do not place the instrument in an unstable position where it might accidentally
fall over.
Before moving the instrument, remove all connected adaptor and other cables.
When setting up the product, make sure that the AC outlet you are using is
easily accessible. If some trouble or malfunction occurs, immediately turn off
the power switch and disconnect the plug from the outlet. Even when the power
switch is turned off, electricity is still flowing to the product at the minimum
level. When you are not using the product for a long time, make sure to unplug
the power cord from the wall AC outlet.
Use only the stand specified for the instrument. When attaching the stand or
rack, use the provided screws only. Failure to do so could cause damage to the
internal components or result in the instrument falling over.
Power supply/AC power adaptor
Do not open
Water warning
Fire warning
If you notice any abnormality
Power supply/AC power adaptor
Location
1
(3)-10
YDP-S30 Owner’s Manual
4
ENGLISH
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all
components, set all volume levels to minimum. Also, be sure to set the volumes
of all components at their minimum levels and gradually raise the volume
controls while playing the instrument to set the desired listening level.
When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical-impregnated wiping cloths.
•Take care that the key cover does not pinch your fingers, and do not insert a
finger or hand in any gaps on the key cover or instrument.
Never insert or drop paper, metallic, or other objects into the gaps on the key
cover, panel or keyboard. If this happens, turn off the power immediately and
unplug the power cord from the AC outlet. Then have the instrument inspected
by qualified Yamaha service personnel.
Do not place vinyl, plastic or rubber objects on the instrument, since this might
discolor the panel or keyboard.
Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.
Saving and backing up your data
Data in the instrument’s internal memory can be lost due to operational errors or
malfunction. Be sure to save any important data to external media via a
computer connected to the instrument. (page 31)
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
Even when the power switch is in the “STANDBY” position, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long
time, make sure you unplug the AC power adaptor from the wall AC outlet.
Connections
Maintenance
Handling caution
Saving data
2
ENGLISH
YDP-S30 Owner’s Manual
5
Welcome
Thank you for purchasing the Yamaha Digital Piano! We recommend that you read this manual carefully so that you can
take full advantage of the advanced and convenient functions of your new digital piano.
We also recommend that you keep this manual in a safe, convenient place for future reference.
About this Owner’s Manual
This manual consists of three main sections: “Introduction, “Reference” and Appendix.
Introduction (page 2):
Please read this section first.
Reference (page 13):
This section explains how to make detailed settings for the instrument’s various functions.
Appendix (page 39):
This section introduces reference material.
*The illustrations as shown in this owner’s manual are for instructional purposes only, and may be different from the
ones on your instrument.
Trademarks:
•Windows is a registered trademark of Microsoft® Corporation.
•All other trademarks are the property of their respective holders.
COPYRIGHT NOTICE
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with
respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all
computer software, MIDI files and WAVE data. Any unauthorized use of such programs and contents outside of per-
sonal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE,
DISTRIBUTE OR USE ILLEGAL COPIES.
Copying of the commercially available software is strictly prohibited except for your personal use.
3
ENGLISH
YDP-S30 Owner’s Manual
6
Table of Contents
Introduction
SPECIAL MESSAGE SECTION ...................... 2
Welcome...............................................................5
About this Owner’s Manual........................ 5
Table of Contents ....................................... 6
Application Index........................................ 7
Accessories .................................................. 8
Maintenance ............................................... 8
Features....................................................... 9
Before Using the Digital Piano ................. 10
Turning the Power On.......................................10
Key cover and music rest ...................................11
Setting the Volume.............................................12
Using Headphones.............................................12
Reference
Part Names................................................ 14
Listening to the Demo Songs ................... 15
Listening to 50 Piano Preset Songs .......... 16
Listening to Songs Loaded from
the Computer......................................... 17
Selecting & Playing Voices........................ 18
Selecting Voices..................................................18
Using the Pedals .................................................19
Adding Variations to the Sound – Reverb........20
Layering Two Voices (Dual mode) ...................21
Transposition .....................................................22
Fine-tuning the Pitch .........................................22
Using the Metronome........................................23
Adjusting the Keyboard Touch
(Touch Sensitivity) ........................................24
Recording your Performance.................... 25
Playing Back Recorded Performance Data .......26
Song Clear...........................................................26
Connecting MIDI Instruments.................. 27
About MIDI........................................................27
MIDI’s Capability...............................................27
Connecting the Digital Piano to
a Computer ............................................ 28
MIDI Functions.......................................... 29
MIDI Transmit/Receive Channel Selection......29
Local Control ON/OFF......................................29
Program Change ON/OFF.................................30
Control Change ON/OFF ..................................30
Transmitting Song Data between
the Computer and the Digital Piano...... 31
Loading Song Data from a Computer to the
Digital Piano .................................................. 31
Transmitting Song Data from the Digital
Piano to a Computer..................................... 31
Backing up Data and Initializing the Settings .. 32
Troubleshooting........................................ 33
Options...................................................... 33
Keyboard Stand Assembly ........................34
Index.......................................................... 37
Appendix
MIDI Data Format ..................................... 40
MIDI Implementation Chart ..................... 44
Specifications ............................................46
4
ENGLISH
YDP-S30 Owner’s Manual
7
Application Index
Use this index to find reference pages that may be helpful for your particular application and situation.
Listening
Listening to demo songs with different voices...................................................... “Listening to the Demo Songs” on page 15
Listening to songs from “50 Greats for the Piano ...................................... “Listening to 50 Piano Preset Songs” on page 16
Listening to recorded performances................................................. “Playing Back Recorded Performance Data on page 26
Listening to songs loaded from the computer .........................“Listening to Songs Loaded from the Computer” on page 17
Playing
Using three pedals ....................................................................................................................... “Using the Pedals” on page 19
Shifting the pitch of the keyboard up or down in semitone steps................................................ “Transposition on page 22
Fine-tuning the pitch of the entire instrument when you play this instrument
along with other instruments or CD music.......................................................................“Fine-tuning the Pitch on page 22
Adjusting the key touch response (sensitivity) for changing the volume
.............................................................................................. “Adjusting the Keyboard Touch (Touch Sensitivity)” on page 24
Changing voices
Viewing the list of voices............................................................................................................. “Selecting Voices” on page 18
Simulating a concert hall ....................................................................Adding Variations to the Sound – Reverb” on page 20
Combining two voices.................................................................................... “Layering Two Voices (Dual mode)” on page 21
Practicing
Practicing with an accurate and steady tempo .................................................................“Using the Metronome on page 23
Recording
Recording your performances ............................................................................... “Recording your Performance” on page 25
Erasing recorded song .......................................................................................................................... “Song Clear” on page 26
Connecting this instrument to other devices
What is MIDI? ..................................................................................................... “Connecting MIDI Instruments” on page 27
Connecting the computer ............................................................ “Connecting the Digital Piano to a Computer” on page 28
Tr ansmitting the recording of your performance to a computer
..........................................................................Transmitting Song Data from the Digital Piano to a Computer” on page 31
Tr ansmitting song data from a computer to the instrument
..................................................................................“Loading Song Data from a Computer to the Digital Piano” on page 31
Assembling
Assembling and disassembling this instrument..................................................“Keyboard Stand Assembly” on pages 34–36
5
ENGLISH
YDP-S30 Owner’s Manual
8
Accessories
“50 Greats for the Piano” (Music Book)
Owner’s Manual
This manual contains complete instructions for operating your digital piano.
Quick Operation Guide
AC Power Adaptor (Yamaha PA-5D, PA-150 or an equivalent)*
* May not be included depending on your particular area. Check with your Yamaha dealer for details.
Maintenance
Clean the instrument using a dry or slightly damp soft cloth (wring well).
CAUTION
Do not use benzene, thinner, detergent, or chemically-treated cloth for cleaning. Do not place vinyl, plastic or rubber
products on the instrument.
Otherwise, the panel or keys may become discolored or degraded.
CAUTION
Before using this instrument, be sure to read “Precautions” on pages 3 – 4.
Tuning
Unlike an acoustic piano, this instrument does not need to be tuned. It always stays perfectly in tune.
Transporting
If you move to another location, you can transport this instrument along with your other belongings. You can move
the unit as it is (assembled) or you can disassemble the unit before moving.
Tr ansport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the
instrument to excessive vibration or shock.
6
ENGLISH
YDP-S30
Owner’s Manual
9
Features
The Yamaha YDP-S30 digital piano features a special “GHS (Graded Hammer Standard)” keyboard that offers natural
grand-piano type playability.
The GHS keyboard simulates the touch of a fine piano keyboard that changes key weight over the range of the entire key-
board from low to high, providing a luxurious and natural playability.
The sound source of the YDP-S30 uses Yamahas original AWM Stereo Sampling” tone-generation technology for rich
and musical voices.
Two of the piano voices, “Grand Piano 1” and “Grand Piano 2, feature totally new samples recorded from a full-size con-
cert grand piano. The “Electric Piano voice features multiple samples for different velocities (Dynamic Sampling); that
is, different samples are used depending on how fast or strong you strike the keys.
This digital piano sounds much closer to a true acoustic piano.
....
..
........
........
........
........
........
........
........
PHONES
MIDI
IN OUT
TO PEDAL
DC IN 12V
[PHONES]
A set of standard stereo headphones
can be plugged in here for private prac-
tice (page 12).
MIDI [IN/OUT]
Connect a MIDI device to this jack to
use various MIDI functions (pages 27–
28). (Connecting MIDI Instruments—
page 27)
[PEDAL]
Connect the pedal cord
(page 34).
[DEMO/SONG]
Listen to the playback of a demo song
for each voice and 50 piano preset
songs (page 15).
[PIANO/VOICE]
Select one of 6 internal sounds, includ-
ing Grand Piano 1 and 2 (page 18).
You can also layer two voices together
(page 21) or select various reverb
effects (page 20).
[REC]
Record your performance (page 25).
[PLAY]
Play back your recorded performance
(page 26).
[MASTER VOLUME]
Adjust the volume level using this control
(page 12).
[METRONOME]
Control the metronome functions (page 23).
[SELECT –/+]
Select a demo song for each voice, or one
of the 50 piano preset songs (page 15 and
16). You can also select a different voice
while the song playback is stopped.
[DC-IN 12V]
Connect the included power
adaptor here (page 10).
Shows the [DC-IN 12V] and [PEDAL]
jacks as seen when viewed from the
rear of the instrument.
Front
7
ENGLISH
YDP-S30 Owner’s Manual
10
Before Using the Digital Piano
Turning the Power On
1. Connect the power adaptor.
1-1 Make sure that the
[STANDBY/ON] button is set to STANDBY.
1-2 Insert the DC plug on the power adaptor into the [DC IN 12V] jack.
1-3 Insert the AC plug on the power adaptor into a wall AC outlet.
WARNING
Use the specified adaptor (PA-5D, PA-150, or an equivalent recommended by yamaha) only. The use of other adaptors may result in
irreparable damage to both the adaptor and the instrument.
WARNING
Unplug the AC Power Adaptor when not using the instrument, or during electrical storms.
2. Turn the power on.
Press the [STANDBY/ON] button.
•The power indicator located below the left end of the keyboard lights up.
To turn the power off, press the
[STANDBY/ON] button again.
•The power indicator turns off.
CAUTION
Even when the switch is in the “STANDBY” position, electricity is still flowing to the instrument at a minimum level. When not using the
instrument for an extended period of time, be sure to unplug the AC power adaptor from the wall AC outlet.
1-2
1-3
[DC IN 12V] jack
adaptor
AC outlet
[STANDBY/ON]
Power indicator
8
ENGLISH
YDP-S30 Owner’s Manual
11
Key cover and music rest
Opening the key cover
1. Hold the ledge of the key cover top with both hands, then open the key cover slowly.
2. Fold the front panel strip.
3. Unfold the music rest.
Closing the key cover
1. Fold the music rest.
2. Unfold the front panel strip.
3. Hold the key cover with both hands and close it slowly.
CAUTION
Before closing the key cover, be sure to fold the music rest and unfold the front panel strip.
9
ENGLISH
YDP-S30 Owner’s Manual
12
Setting the Volume
When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level.
CAUTION
Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged.
Using Headphones
Connect a pair of headphones to one of the [PHONES] jacks.
Two [PHONES] jacks are provided.
You can connect two sets of standard stereo headphones. (If you are
using only one pair of headphones, you can plug them into either
jack.)
The level decreases. The level increases.
PHONES
bottom surface
standard stereo
phone plug
10
ENGLISH
YDP-S30 Owner’s Manual
13
Reference
Part Names................................................................ 14
Listening to the Demo Songs................................... 15
Listening to 50 Piano Preset Songs.......................... 16
Listening to Songs Loaded from the Computer ..... 17
Selecting & Playing Voices ....................................... 18
Selecting Voices ........................................................... 18
Using the Pedals .......................................................... 19
Adding Variations to the Sound – Reverb.................. 20
Layering Two Voices (Dual mode) ............................. 21
Tr ansposition............................................................... 22
Fine-tuning the Pitch.................................................. 22
Using the Metronome................................................. 23
Adjusting the Keyboard Touch (Touch Sensitivity) .. 24
Recording your Performance................................... 25
Playing Back Recorded Performance Data ................ 26
Song Clear ................................................................... 26
Connecting MIDI Instruments ............................... 27
About MIDI................................................................. 27
MIDI’s Capability........................................................ 27
Connecting the Digital Piano to a Computer ................ 28
MIDI Functions........................................................ 29
MIDI Transmit/Receive Channel Selection ............... 29
Local Control ON/OFF............................................... 29
Program Change ON/OFF ......................................... 30
Control Change ON/OFF ........................................... 30
Tr ansmitting Song Data between the Computer and
the Digital Piano....................................................... 31
Loading Song Data from a Computer to the Digital
Piano ........................................................................ 31
Tr ansmitting Song Data from the Digital Piano to a
Computer................................................................. 31
Backing up Data and Initializing the Settings ........... 32
Troubleshooting ....................................................... 33
Keyboard Stand Assembly ....................................... 34
Index......................................................................... 37
This section explains how to make detailed settings for this
instrument’s various functions.
11
ENGLISH
YDP-S30
Owner’s Manual
14
Part Names
TO PEDAL
DC IN 12V
PHONES
MIDI
IN OUT
9
)
1
4
#
$
%
5
6
7 8
3
2
!
@
1 [STANDBY/ON]............................. P10
2 [MASTER VOLUME]....................... P12
3 [METRONOME]............................. P23
4 [DEMO/SONG] ............................. P15
5 [PIANO/VOICE] ........................P18–21
6 [SELECT –/+] ..................... P15, 16, 18
7 [REC]............................................. P25
8 [PLAY] ..................................... P25, 26
9 MIDI [IN]/[OUT] ........................... P27
0 [PHONES] ..................................... P12
A [PEDAL]......................................... P34
B [DC-IN 12V].................................. P10
C Soft (Left) Pedal ............................ P19
D Sostenuto (Center) Pedal .............. P19
E Damper (Right) Pedal ................... P19
12
ENGLISH
YDP-S30 Owner’s Manual
15
Listening to the Demo Songs
Demo songs are provided that effectively demonstrate each of this instrument’s voices.
1. Turn on the power.
The demo songs will not be
transmitted via MIDI.
(In case the power is not turned ON) Press the [STANDBY/ON] button.
When you start playing, adjust the [MASTER VOLUME] control to the most
comfortable listening level.
2. Start playing back a demo song.
Press the [DEMO/SONG] button.
The demo song for the currently-selected voice starts playing.
3. Select and play a demo song.
While a demo song is playing, press the [SELECT –/+] button to select and play
the next demo song.
If you wish to select a particular demo song from 6 voice demo songs, while
holding down the [DEMO/SONG] button, press one of the C1–F1 keys.
The selected demo song starts to play. Starting with the selected song, the
playback of the demo songs will continue in the following sequence: other
voice demo songs, followed by 50 piano preset songs, and any songs
loaded from the computer. The sequence then returns to the first demo
song and repeats until you stop it.
Demo Songs
Each of the 6 voices features its own demo song that showcases the correspond-
ing voice. Please refer to “Selecting Voices” on page 18.
The demo songs listed below are re-arranged excerpts from the original compo-
sitions.
The other demo songs are Yamahas original pieces (©2005 Yamaha Corpora-
tion).
Adjusting the Volume
Use the
[MASTER VOLUME] control to adjust the volume.
4. Stop the Voice demo.
Press the [DEMO/SONG] button to stop playback.
Procedure
Refer to the voice list on
page 18 for more information on
the characteristics of each pre-
set voice.
KeyVoice Name Title Composer
C1 GrandPiano1 “Eintritt” Waldszenen Op.82 R. Schumann
D
1 Harpsichord Gavotte J.S. Bach
The lowest key
C1 F1
13
ENGLISH
YDP-S30 Owner’s Manual
16
Listening to 50 Piano Preset Songs
This digital piano provides performance data for 50 piano songs as well as voice demo songs. You
can simply listen to these songs. You can also refer to the included “50 Greats for the Piano” that
contains scores for 50 piano preset songs.
1. Select and play back a piano preset song.
The number of each piano preset song is assigned to the C2-C
6 keys.
While holding down the [DEMO/SONG] button, press one of the C2-C
6 keys
to select a song to play back.
The selected piano song starts to play.
To play all preset songs consecutively in sequence, while holding down the
[DEMO/SONG] button, press the D6 key.
Press the
[SELECT –/+] button to change to the next piano song.
Adjusting the Volume
Use the [MASTER VOLUME] control to adjust the volume.
2. Stop playback.
To stop the song during playback, press the [DEMO/SONG] button.
•To continue playing other songs, see procedure 1 above.
Procedure
Song:
On this instrument, perfor-
mance data is called a “Song.
This includes demo songs and
50 piano preset tunes.
You can play the keyboard
along with the preset song. You
can change the voice playing on
the keyboard.
The default tempo is automati-
cally selected whenever a new
preset song is selected, and
when a new preset song begins
playback in the continuous play-
back.
To adjust the tempo of the preset
song playback, see page 23.
When you select a different song
(or a different song is selected
during chained playback), an
appropriate reverb type will be
selected accordingly.
The 50 piano preset songs will
not be transmitted via MIDI.
C2 C3 C4 C5 Consecutive
playback (D6)
The highest key
1st song 10th song 20th song 30th song 40th song 50th song (C
6)
14
ENGLISH
YDP-S30
Owner’s Manual
17
Listening to Songs Loaded from the
Computer
You can transfer song data from your computer to this instrument and play back the songs. (See
page 31 for more information on loading song data from the computer.)
1.
Select and play back a song.
You can load up to 10 songs or
up to 352 KB of data from the
computer.
Use the following table to write
down the song titles you loaded
from the computer.
Song numbers (1 through 10) are assigned to the D
6-C7 keys (see the illustra-
tion below).
While holding down the
[DEMO/SONG]
button, press one of the D
6-C7 keys
to select a song to play back.
The selected song starts to play.
Adjusting the Volume
Use the
[MASTER VOLUME]
control to adjust the volume while listening to the
song.
2.
Stop playback.
To stop the song during playback, press the
[DEMO/SONG]
button.
Selecting a Song Playback Channel
If a song loaded from the computer uses a voice that is not supported by this
instrument, the originally-assigned voice may not be reproduced accurately. In
this case, switching the song playback channel from All” to “1 + 2” may
improve the tone to more natural sound.
Selecting all song playback channels:
While pressing and holding down the
[DEMO/SONG]
button and the
[PIANO/
VOICE]
button simultaneously, press the B6 key.
All channels 1 through 16 will produce the sound.
Selecting 1 + 2 song playback channels:
While pressing and holding down the
[DEMO/SONG]
button and the
[PIANO/
VOICE]
button simultaneously, press the C7 key.
Channels 1 + 2 will produce the sound.
Procedure
Key Song title
D
6
E6
F6
F
6
G6
G
6
A6
A
6
B6
C7
D
6C7
1st song 10th song
B6
The top key
C7
The top key
15
ENGLISH
YDP-S30 Owner’s Manual
18
Selecting & Playing Voices
Selecting Voices
Press and release the [PIANO/VOICE] button to select the Grand Piano 1 voice.
While holding down the
[PIANO/VOICE] button, press one of the C1-F1 keys to select
a voice. Alternatively, you can also select a voice by pressing [PIANO/VOICE] button,
then press the [SELECT –/+] button repeatedly to select a different voice.
Turn the [MASTER VOLUME] control to adjust the volume level while playing the key-
board.
Procedure
To understand the characteris-
tics of various voices, listen to
demo songs for each voice
(page 15).
Voice:
On this instrument, a voice
means a “tone” or “tonal color.
Selecting a voice automatically
engages the best-suited reverb
type and depth (page 20) for
that particular voice.
KeyVoice Name Description
C1 Grand Piano 1
Recorded samples from a full concert grand piano. Perfect for classical
compositions as well as any other style that requires acoustic piano.
C
1Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music.
D1 E.Piano An electronic piano sound created by FM synthesis. Good for popu-
lar music.
D
1 Harpsichord The definitive instrument for baroque music. Since the strings of a
harpsichord are plucked, there is no touch response.
E1
Church Organ
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for
sacred music from the Baroque period.
F1 Strings Spacious and large-scale string ensemble. Try combining this voice
with piano in DUAL mode.
C
1D
1
The lowest key
C1 D1 E1 F1
16
ENGLISH
YDP-S30 Owner’s Manual
19
Using the Pedals
Damper (Right) Pedal
The damper pedal functions as a selective damper
pedal by sustaining certain notes. Hold down a
note, press the damper pedal, then release the key.
The note will continue to sound until you release
the damper pedal.
The damper pedal features a half-pedal function.
Sostenuto (Center) Pedal
If you play a note or chord on the keyboard and
press the sostenuto pedal while the note(s) are
held, those notes will sustain as long as you hold
the pedal (as if the damper pedal had been pressed)
but all subsequently played notes will not be sus-
tained. This makes it possible to sustain a chord,
for example, while other notes are played “stac-
cato.
Soft (Left) Pedal
The soft pedal reduces the volume and slightly changes the timbre of notes played while
the pedal is pressed. The soft pedal will not affect notes that are already playing when it
is pressed.
If the damper pedal doesn’t
work, make sure that the pedal
cord is properly plugged into the
main unit (page 34).
While playing the piano with
Sustain and you want to slightly
mute the sustained sound,
release the foot pedal from
maximum position to half posi-
tion.
Organ and string voices will
continue to sound for as long as
the sostenuto pedal is
depressed.
When you press the damper pedal
here, the notes you play before you
release the pedal sustain longer.
When you press the sostenuto
pedal here while holding the note,
the note will sustain as long as you
hold the pedal.
17
ENGLISH
YDP-S30 Owner’s Manual
20
Adding Variations to the Sound – Reverb
This control enables you to select various digital reverb effects that add extra depth and expression
to the sound to create a realistic acoustic ambience.
While holding down the [PIANO/VOICE] button, press one of the C2–E2 keys to select
a reverb type.
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by pressing one of the C3–G
4 keys while
holding down the [PIANO/VOICE] button. The depth range is from 0 through 20.
While holding down the
[PIANO/VOICE] button, press the A4 key to set the reverb to
the depth most suitable for the selected voice.
Procedure
KeyReverb Type Description
C2 Room This setting adds a continuous reverb effect to the sound, similar to
the acoustic reverberation you would hear in a room.
C
2 Hall1 For a “bigger” reverb sound, use the HALL 1 setting. This effect sim-
ulates the natural reverberation of a small-size concert hall.
D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
D
2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
The lowest key
C
2D
2
C2 E2D2
The default reverb type (includ-
ing OFF) and depth settings are
different for each voice.
depth 0: no effect
depth 20: maximum reverb
depth
The depth value increases as you press higher keys.
The lowest key C3: depth 0 A4
G
4: depth 20
18
ENGLISH
YDP-S30 Owner’s Manual
21
Layering Two Voices (Dual mode)
You can layer two voices and play them simultaneously to create a thicker and more supple sound.
1. Engage Dual mode.
While holding down the
[PIANO/VOICE]
button, press two keys in the range of C1
through F1 simultaneously to select the two desired voices. Alternatively, while holding
down the
[PIANO/VOICE]
button, press and hold down one key, then press another.
Refer to “Selecting & Playing Voices” on page 18 for information on the voices
that are assigned to the keys.
The voice assigned to the lower key will be designated as Voice 1, and the voice
assigned to the higher key will be designated as Voice 2.
You can make the following settings for Voices 1 and 2 in Dual mode:
Setting the Octave
You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 inde-
pendently. Depending on which voices you combine in Dual mode, the combi-
nation may sound better if one of the voices is shifted up or down an octave.
While holding down the
[PIANO/VOICE] button, press one of the C5–F5 keys.
Setting the Balance
You can adjust the volume balance between two voices. For example, you can set
one voice as the main voice with a louder setting, and make the other voice softer.
While holding down the [PIANO/VOICE] button, press one of the F
5–F
6 keys.
A setting of “0” produces an equal balance between the two Dual mode voices.
Settings below “0” increases the volume of Voice 2 in relation to Voice 1, and set-
tings above “0” increases the volume of Voice 1 in relation to Voice 2.
2. Exit Dual mode and return to normal play mode.
While holding down the [PIANO/VOICE] button, press one of the C1–F1 keys.
Procedure
You cannot assign the same
voice to Voice 1 and Voice 2
simultaneously in Dual mode.
Reverb in Dual Mode
The reverb type assigned to
Voice 1 will take priority. (If the
reverb assigned to Voice 1 is set
to OFF, the reverb assigned to
Voice 2 will be in effect.) The
reverb depth setting (
page 20
)
will be applied only to Voice 1.
The lowest key C1 F1
C5 key: –1 (Voice 1), C
5 key: 0 (Voice 1), D5 key: +1(Voice 1),
D
5 key: –1 (Voice 2), E5 key: 0 (Voice 2), F5 key: +1(Voice 2)
The highest ke
y
C5 F5
-5
-6 -4 -2
+1 +3 +6
-3 -1 0 +2 +4 +5
The highest ke
y
F
5C6F
6
19
ENGLISH
YDP-S30 Owner’s Manual
22
Transposition
Your digital piano’s Transpose function makes it possible to shift the pitch of the entire keyboard up
or down in semitone intervals up to a maximum of six semitones, and lets you easily match the pitch
of the keyboard to the range of a singer or other instruments.
For example, if you set the transposition amount to “5,” playing key C produces pitch F. In this way,
you can play a song as though it were in C major, and this instrument will transpose it to the key of F.
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons, press one of
the F
2–F
3 keys to set the desired amount of transposition.
[DEMO/SONG] + [PIANO/VOICE] + C3 key:
Plays normal keyboard pitch.
[DEMO/SONG] + [PIANO/VOICE] + B2 key (white key to the left of C3):
Tr ansposes the pitch down by one semitone.
[DEMO/SONG] + [PIANO/VOICE] + B
2 key (the first black key to the left of C3):
Tr ansposes the pitch down a whole tone (two semitones).
[DEMO/SONG] + [PIANO/VOICE] + F
2 key:
Tr ansposes the pitch down by six semitones.
[DEMO/SONG] + [PIANO/VOICE] + C
3 key (black key to the right of C3):
Tr ansposes the pitch up by one semitone.
[DEMO/SONG] + [PIANO/VOICE] + D3 key (the first white key to the right of C3):
Tr ansposes the pitch up a whole tone (two semitones).
[DEMO/SONG] + [PIANO/VOICE] + F
3 key:
Tr ansposes the pitch up by six semitones.
Fine-tuning the Pitch
You can fine-tune the pitch of the entire instrument. This function is useful when you play the digi-
tal piano along with other instruments or CD music.
Raising the pitch (0.2Hz steps)
Hold down the A-1, B-1 and C0 keys, and press any key in the range from C3 to B3.
Lowering the pitch (0.2Hz steps)
Hold down the A-1, B-1 and C#0 keys, and press any key in the range from C3 to B3.
Resetting to the default pitch
Hold down the A-1, B-1, C0 and C#0 keys, and press any key in the range from C3 to B3.
Setting range: 427.0-453.0 Hz
Default pitch: 440.0 Hz
Procedure
Transpose:
Changing the key signature. On
this instrument, transposing
shifts the pitch of the entire key-
board.
-5 -3 -1 0 +2 +4 +5
-6 -4 -2 +1
+3 +6
Transpose
down.
Transpose
up.
Normal
pitch.
F
2C3 F
3
Hz (Hertz):
This unit of measurement refers
to the frequency of a sound and
represents the number of times
a sound wave vibrates in a sec-
ond.
Procedure
To tune up To tune down To restore default pitch
B3C3
C
0A-1
B-1B-1
A-1A-1 C0
B-1
C
0
C0
20
ENGLISH
YDP-S30 Owner’s Manual
23
Using the Metronome
Your digital piano features a built-in metronome (a device that keeps an accurate tempo) that is
convenient for practicing.
1. Start the metronome.
Press the [METRONOME] button to turn on the metronome.
Determines the Time Signature
While holding down the [METRONOME] button, press one of the C3–F3 keys.
Adjusting the Tempo
The tempo of the metronome and preset song playback can be set from 32 to
280 beats per minute.
A number is assigned to each of the following keys.
While holding down the
[METRONOME] button, press a sequence of C4–A4
keys to specify a three-digit number.
Select a number starting from the left-most digit. For example, to set the tempo
“95, press the C4 (0), A4 (9) and F4 (5) keys in sequence.
Increasing the tempo value in steps of one:
While holding down the
[METRONOME] button, press the C
5 key.
Decreasing the tempo value in steps of one:
While holding down the [METRONOME] button, press the B4 key.
Increasing the tempo value in steps of ten:
While holding down the [METRONOME] button, press the D5 key.
Decreasing the tempo value in steps of ten:
While holding down the [METRONOME] button, press the A
4 key.
Resetting the tempo to default:
While holding down the
[METRONOME] button, press the C5 key.
Procedure
C3 key: No downbeat, C
3 key: 2/4, D3 key: 3/4, D
3 key: 4/4, E3 key: 5/4, F3 key: 6/4
The highest key
F3E3D3C3
C
3
D
3
024579
8631
The highest key
C
5A
4
C4 A4 B4 C5 D5
21
ENGLISH
YDP-S30 Owner’s Manual
24
Adjusting the Volume
You can change the volume of the metronome sound.
While holding down the [METRONOME] button, press one of the C1–G2 keys
to determine the volume.
2. Stop the metronome.
Turn off the metronome by pressing the [METRONOME] button.
Adjusting the Keyboard Touch
(Touch Sensitivity)
You can adjust the volume level that changes depending on how fast or
strong you hit the keys. The following four settings are available.
This setting is disabled with
some voices, such as an organ
sound.
A6 ..............................The volume level does not change at all regardless of whether you
play the keyboard soft or hard.
A
6 .............................The volume level does not change much when you play the key-
board soft or hard.
B6 ..............................This is the standard piano touch response. (This is the default set-
ting.)
C7 ..............................The volume level changes very widely from pianissimo to fortis-
simo to facilitate dynamic and dramatic expression. You have to
hit the keys hard to produce a loud sound.
While holding down the [PIANO/VOICE] button, press one of the A6-C7 keys to select
the desired touch sensitivity.
The volume level increases as you press higher keys.
The lowest key C1 G2
Procedure
A6 C7
22
ENGLISH
YDP-S30 Owner’s Manual
25
Recording your Performance
Your digital piano’s recording function enables you to record your per-
formance of one song.
The recorded performance is called the “user song.”
Follow the steps below to record and play back your performance.
CAUTION
Be careful not to erase the recorded data:
After you record a performance on this instrument, the [PLAY] button indicator
lights up. When this indicator remains on, recording another performance will
erase the recorded data.
You cannot engage Record mode
while a demo song is playing.
Recording capacity
“Recording capacity” is the
maximum amount of perfor-
mance data that you can
record. This instrument’s
recording capacity is 65 KB
(approximately 11,000 notes).
Changing the settings for the
recorded user song
To change the settings for the
recorded user song, engage
Record mode, change the settings
as you desire, then stop recording
without playing the keyboard.
For example, if you wish to
change the voice of the user
song, press the [REC] button to
engage Record mode (see Step
2), then select a different voice
(see Step 1). Without playing the
keyboard, press the [REC] button
to stop recording (see Step 4).
CAUTION
Do not turn off the power to this
instrument while it is recording
the data in its internal memory
(that is, while the [REC] and
[PLAY] button indicators are
flashing). Otherwise, all
recorded data, including the
data being recorded, will be lost.
You can save the recorded user
song to a computer. You can also
load the user song data from a
computer and play it back on this
instrument. (See page 31.)
1. Select a voice and other settings for the recording.
While holding down the [PIANO/VOICE] button, press one of the C1–F1 keys to
select the desired voice(s). (See page 18.)
If you desire, you can select other settings, such as the reverb setting.
Use the [MASTER VOLUME] control to adjust the volume to a comfortable lis-
tening level. You can also use the [MASTER VOLUME] control to adjust the vol-
ume level during playback.
2. Engage Record mode.
Press the [REC] button.
The
[REC] button indicator lights up.
Press the
[REC] button again if you wish to cancel Record mode.
3. Start recording.
Recording starts as soon as you play the keyboard.
Alternatively, press the [PLAY] button to start recording.
4. Stop recording.
Press the [REC] button.
Audio recording and data recording
Cassette tape recordings use a different data format than this instrument.
Cassette tapes record audio signals. On the other hand, this instrument
records information about the notes and voices being played and about the
timing and tempo of those notes. It does not record audio signals. When
you play back a recorded performance on this instrument, its internal tone
generator reproduces the sound according to the recorded information.
Procedure
23
ENGLISH
YDP-S30 Owner’s Manual
26
Playing Back Recorded Performance
Data
1. Start the playback.
Press the [PLAY] button.
2. Stop the playback.
When the user song finishes playing back, this instrument automatically returns
to the previous mode.
To stop the playback, press the [PLAY] button.
Song Clear
The Song clear operation completely erases the recorded song.
1. Engage Record mode.
Press the [REC] button.
The record button indicator lights up.
Press the
[REC] button again if you wish to cancel the clear operation.
2. Start Clear
Press the [PLAY] button and then press the [REC] button.
Procedure
Procedure
24
ENGLISH
YDP-S30 Owner’s Manual
27
Connecting MIDI Instruments
Your digital piano features MIDI jacks. Using the MIDI functions enables
you to access a variety of musical genres.
Since MIDI data that can be
transmitted or received varies
depending on the type of MIDI
device, check the “MIDI Imple-
mentation Chart” to find out
what MIDI data and commands
your devices can transmit or
receive. This instrument’s MIDI
Implementation Chart appears
on page 44.
You need a dedicated MIDI
cable (optional) to make a MIDI
connection. You can purchase
MIDI cables at musical instru-
ment stores.
If you connect a very long MIDI
cable, data transmission errors
may result. Use a MIDI cable of
15 meters or less.
Before connecting a MIDI
device to this instrument, first
turn off the power to both this
instrument and the MIDI device.
After connecting them, turn on
the power to the MIDI device
first, then turn on the power to
this instrument.
You cannot transmit the voice
demo songs and the 50 piano
preset songs from this instru-
ment to another MIDI device.
For more information on the
transmission and reception of
song data, refer to “Transmitting
Song Data between the Com-
puter and the Digital Piano” on
page 31.
About MIDI
MIDI (Musical Instrument Digital Interface) is a global format standard
for performance data transmission and reception between electronic
musical instruments.
Connecting musical instruments that support MIDI via MIDI cables
enables you to transfer performance and setting data between multiple
musical instruments. Using MIDI, you can also achieve more advanced
performances than using just a single musical instrument.
MIDI’s Capability
MIDI functions enable you to transfer performance data between MIDI
devices, load song data from a connected computer to your instru-
ment, and transmit and save user song data to a computer.
Transferring performance data to and from another
MIDI device
Transferring MIDI data to and from a computer
MIDI
IN OUT
YDP-S30
MIDI instrument
MIDI OUT
jack
MIDI IN
jack
MIDI OUT
jack
MIDI IN
jack
Optional
MIDI cables
YDP-S30
MIDI IN
jack
MIDI OUT
jack
Computer
USB port
Optional
USB-MIDI interface
(e.g., Yamaha UX16)
OUT
IN
25
ENGLISH
YDP-S30 Owner’s Manual
28
Connecting the Digital Piano to a
Computer
Connecting the digital piano to a computer using the MIDI jacks enables you to transfer MIDI data
between the piano and the computer.
In addition, installing Musicsoft Downloader on the computer enables you to transfer song data
between the instrument and the computer (page 31).
An example of connecting this instrument to the USB port on a computer
Use an optional USB-MIDI interface (such as a Yamaha UX16) to connect this instrument’s MIDI jacks to the computer’s
USB port.
You must install the USB-MIDI driver on the computer correctly so that you can control your MIDI instrument from the
computer. The USB-MIDI driver is a software application that enables MIDI signals to be transmitted between the
sequence software on the computer and the connected MIDI instrument. For more information, refer to the user’s man-
ual that came with the USB interface device.
Connecting this instrument to the computer using a USB-MIDI interface
Tu rn off the power to this instrument. Connect the MIDI OUT cable from the USB-MIDI interface to this instru-
ment’s MIDI IN jack, and connect the MIDI IN cable from the USB-MIDI interface to this instrument’s MIDI OUT
jack.
The connection between this instrument and the computer has now been established.
Turn on the power to this instrument and try to transfer MIDI data to or from the computer.
For more information on connecting the YAMAHA UX16, refer to the user’s manual that came with the UX16.
When this instrument is used as a tone module, performance data with voices that are not found on this instrument will not be played cor-
rectly.
Before you connect this instrument to a computer, first turn off the power to both this instrument and the computer. After you make the
connections, turn on the power to the computer first, then turn on the power to this instrument.
IN
OUT
MIDI
IN OUT
YDP-S30
Computer
You must install a software application on the computer to be able to transfer MIDI data between this instrument and a computer.
26
ENGLISH
YDP-S30 Owner’s Manual
29
MIDI Functions
You can make detailed adjustments to MIDI settings.
MIDI Transmit/Receive Channel Selection
In any MIDI control setup, the MIDI channels of the transmitting and receiving equip-
ment must be matched for proper data transfer.
This parameter enables you to specify the channel on which the digital piano transmits
or receives MIDI data.
Setting the transmit channel
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously,
press one of the C1-E2 keys.
Default setting: Channel 1
Setting the receive channel
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously,
press one of the C4-F5 keys.
Default setting: ALL
Local Control ON/OFF
“Local Control” refers to the fact that, normally, the keyboard of this digital piano con-
trols its internal tone generator, allowing the internal voices to be played directly from
the keyboard. This situation is “Local Control On,” since the internal tone generator is
controlled locally by its own keyboard.
Local control can be turned OFF, however, so that the keyboard of this digital piano
does not play the internal voices, but the appropriate MIDI information is still trans-
mitted via the MIDI OUT jack when notes are played on the keyboard. At the same
time, the internal tone generator responds to MIDI information received via the MIDI
IN jack.
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simulta-
neously, press the C6 key. Pressing the C6 key repeatedly toggles between Local Control
On and Off.
In Dual mode, Voice 1 data is
transmitted on its specified
channel and Voice 2 data is
transmitted on the next greater
channel number relative to the
specified channel. In this mode,
no data is transmitted if the
transmit channel is set to “OFF.
ALL:
A “Multi-timbre” Receive mode
is available. In this mode, this
instrument receives different
parts from the connected MIDI
device on any or all 16 MIDI
channels and plays multi-chan-
nel song data.
1+2:
A “1+2” Receive mode is avail-
able. It allows simultaneous
reception on channels 1 and 2
only, enabling this instrument to
play 1 and 2 channel song data
received from a music computer
or sequencer.
Program change and other like
channel messages received will
not affect this instrument’s
panel settings or the notes you
play on the keyboard.
Data for the demo song and 50
piano preset songs cannot be
transmitted via MIDI.
CAUTION
When Local control is turned
OFF, the keyboard of this instru-
ment does not play the internal
voices.
Procedure
Procedure
1356810
24 7911 14 16
12 13 15 1356810
24 7911 14 16
12 13 15
1+2
For setting the
transmit channels.
(C1–D
2)
For setting the
receive channels.
(C4–F5)
OFF For ALL mode
F5
E5
C4
E2
D
2C1
The highest key
C6
27
ENGLISH
YDP-S30 Owner’s Manual
30
Program Change ON/OFF
Normally this instrument will respond to MIDI program change numbers received
from an external keyboard or other MIDI device, causing the correspondingly-num-
bered voice to be selected on the corresponding channel (the keyboard voice does not
change). This instrument will normally also send a MIDI program change number
whenever one of its voices is selected, causing the correspondingly-numbered voice or
program to be selected on the external MIDI device if the device is set up to receive and
respond to MIDI program change numbers.
This function makes it possible to cancel program change number reception and trans-
mission so that voices can be selected on this instrument without affecting the external
MIDI device.
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously,
press the C
6 key. Pressing the C
6 key repeatedly toggles between Program Change On
and Off.
Control Change ON/OFF
MIDI Control Change data refers to MIDI information related to performance expres-
sion (such as damper pedal information).
You can transmit MIDI Control Change data from this instrument to control the oper-
ation of a connected MIDI device. (For example, if you operate this instrument’s
damper pedal, this instrument will transmit MIDI Control Change data.)
On the other hand, MIDI performance data received on this instrument from a con-
nected MIDI device will respond to MIDI Control Change data received from the
MIDI device at the same time. (However, the voice you are currently playing on the
keyboard will not respond to the MIDI Control Change data.)
The ability to transmit and receive MIDI Control Change data is sometimes very use-
ful. Turn Control Change On if it is convenient for you to have this capability. Turn
Control Change Off if you rather prefer not to have this capability.
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simulta-
neously, press the D6 key. Pressing the D6 key repeatedly toggles between Control
Change On and Off.
For information on program
change numbers for each of this
instrument’s voices, refer to
page 40 in the MIDI Data For-
mat section.
Procedure
The highest key
C
6
For information on control
changes that can be used with
this instrument, refer to the MIDI
Data Format on page 40.
Procedure
The highest key
D6
28
ENGLISH
YDP-S30 Owner’s Manual
31
Transmitting Song Data between the
Computer and the Digital Piano
You can download free Music-
soft Downloader from the
Yamaha website.
In addition to the demo songs and the 50 piano preset songs stored in this instrument,
you can play data for other song by loading it from a connected computer.
To be able to use this function, you must first download Musicsoft Downloader from
Yamaha website at the following URL, and install it on your computer.
http://music.yamaha.com/download/
System requirement for Musicsoft Downloader
Please visit the URL above to get the latest information on the supported computer systems.
Loading Song Data from a Computer
to the Digital Piano
SMF (Standard MIDI File)
This file features a popular
sequence format (for recording
performance data). This file is
sometimes called a “MIDI file.
The file extension is MID.
You can play the SMF format song
using music software or a
sequencer that supports SMF. This
instrument also supports SMF.
CAUTION
Do not turn off the power to this
instrument or unplug the instru-
ment during data transmission.
Otherwise, the data being trans-
mitted will not be saved. Further-
more, flash memory operation
may become unstable, causing
the entire memory to be erased
when you turn the power to the
instrument on or off.
Keep in mind that the [REC]
and [PLAY] indicators are lit
when Musicsoft Downloader is
being used.
Before you use this instrument,
close the Musicsoft Downloader
window and quit the application.
You can load piano song data from a computer to this instrument. Also, after you
record your performance on this instrument and save the recording to a computer, you
can load the recording back to the instrument.
This instrument can read MIDI data in SMF Format 0. However, if such data includes
any information for functions that are not supported by this instrument, the instru-
ment will not play the data correctly.
For more information on loading song data from a computer to this instrument, please
refer to Transferring Data Between the Computer and Instrument (for unprotected
data)” in the Help file that came with Musicsoft Downloader.
Requirements for song data that can be loaded from a computer
to this instrument
Transmitting Song Data from the
Digital Piano to a Computer
Musicsoft Downloader enables you to transfer the user song in this instrument to a
computer. For more information on transferring song data from this instrument to a
computer, please refer to “Transferring Data Between the Computer and Instrument
(for unprotected data)” in the Help file that came with Musicsoft Downloader.
Data you can transfer from this instrument to a computer
•OS: Windows 98SE/Me/2000/XP Home Edition/XP Professional
CPU : Intel
®
Pentium
®
or Celeron
®
chip of 233MHz or higher
(500MHz or higher recommended)
•Memory : 64MB or higher (256MB or higher recommended)
Available hard disk capacity
: 128MB or higher (512MB or higher recommended)
•Display : 800 × 600 High Color (16-bit)
•Others : Microsoft
®
Internet Explorer
®
version 5.5 or higher
•Number of songs : Up to 10 songs plus one user song
•Maximum data size : Total 352 KB
Data format : SMF Format 0 and 07YDP.BUP (user song)
•User song : 07YDP.BUP
•Song data (once it has been loaded from the computer)
29
ENGLISH
YDP-S30 Owner’s Manual
32
Backing up Data and Initializing the
Settings
Backing up data to flash memory
CAUTION
Do not turn off the power to this
instrument while it is initializing
the data in its internal memory
(that is, while the [REC] and
[PLAY] button indicators are
flashing).
If this instrument somehow
becomes disabled or malfunc-
tions, turn off the power to the
instrument, then perform the ini-
tialization procedure.
The following items will be stored in flash memory on this instrument. This data will
be kept after you turn off the power to the instrument.
Initializing the settings
When you initialize the settings, all data, excluding the songs loaded from a computer,
will be initialized and reset to the factory default settings.
While holding down the C7 (the highest) key, turn on the power to the instrument.
All backup data will be initialized.
Backup data
Metronome volume
Metronome tempo
Touch sensitivity
Tuning
Recorded performance data (user song)
The highest key
C7
30
ENGLISH
YDP-S30 Owner’s Manual
33
Troubleshooting
Options
BC-100 Bench
A comfortable bench styled to match your Yamaha digital piano.
UX16
USB-MIDI interface
HPE-150
Headphones
Problem Possible Cause and Solution
This instrument does not turn on. This instrument has not been plugged in properly. Insert the adaptor plug into an AC
outlet and the adaptor socket into the unit securely (page 10).
Noise from the speakers or headphones is
audible.
The noise may be due to interference caused by the use of a mobile phone in close
proximity to this instrument. Turn off the mobile phone, or move it further away from
this instrument.
The overall volume is low, or no sound is
heard.
The Master Volume is set too low. Set it to an appropriate level using the [MASTER
VOLUME] control.
Make sure a pair of headphones is not connected to the headphones jack.
Make sure that Local Control (page 29) is ON.
The damper pedal has no effect, or the sound
continuously sustains even when the damper
pedal is not pressed.
The pedal cord may not be properly connected. Make sure to securely insert the pedal
cord into the [PEDAL] jack (page 34).
31
YDP-S30 Troubleshooting/Options
ENGLISH
YDP-S30 Owner’s Manual
34
Keyboard Stand Assembly
CAUTION
Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accor-
dance with the sequence given below.
Assembly should be carried out by at least two persons.
Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage.
Be sure to tighten up all screws upon completing assembly of each unit.
•To disassemble, reverse the assembly sequence given below.
Remove all parts from the box. Confirm that all parts shown in the illustration are provided.
1 Attach B to C and D.
1-1 Align C and D with each end of B.
1-2 Attach C and D to B by tightening the long
screws (6 x 30 mm) securely.
2 Mount A.
CAUTION
Be careful not to pinch your fingers or drop the
unit.
Do not hold the keyboard in any position other
than the position instructed in this document.
Have a Phillips-head (+) screwdriver ready
A
CDE
F
B
AC Power Adaptor* x 1
6 x 30mm long screws x 4
6 x 20mm short screws x 4
5 x 20mm thin screws x 4
Cord holders x 5
Back toe x 2
* The adaptor may not be included, or may look different from the illustration above,
depending on your particular area. Please check with your Yamaha dealer.
1
2
D
C
B
A
Be sure to place your hands at least 10 cm
from either end of A when positioning it.
Align the screw holes.
32
ENGLISH
YDP-S30 Owner’s Manual
35
3 Secure A.
3-1 Adjust the position of A so that the left and
right ends of A will project beyond C and D
equally when seen from the front.
3-2 Secure A by tightening four short screws (6
x 20 mm) from the bottom.
4 Attach E.
4-1 Untie and straighten out the bundled pedal
cord, then pass it through the indentation
on B.
4-2 Lift B and insert the top part of E into the
indentation on B so that the pedal unit will
be securely attached to B.
4-3 Insert the pedal cord plug to the pedal jack
from the rear.
4-4 Attach the cord holders to the rear panel as
shown, then clip the cord into the holders.
4-5 Remove the screws from both ends of B,
then attach the back toe using the screws.
CAUTION
If there is no wall immediately behind the instru-
ment, be sure to install anti-fall brackets (Back toe)
on the instrument.
The pedals may damage the floor after an
extended period of time. Protect the floor by plac-
ing a mat or area rug underneath the pedals.
5 Install F.
5-1 Attach F on the rear of A as shown in the
illustration.
5-2 Secure F by tightening the thin screws (5 x
20mm).
CAUTION
When you attach F, be careful not to pinch the cord.
1
2
A
A
1
B
E
2
B
3
5
4
A
F
33
ENGLISH
YDP-S30 Owner’s Manual
36
6 Connect the AC adaptor.
6-1 Insert the AC adaptor plug into the DC-IN
12V jack from the rear.
6-2 Attach the cord holder on the right (or left)
end (whichever is closer to an AC outlet) of
F, then clip the power cord into the holder.
After completing the assembly, please
check the following.
CAUTION
When moving the instrument after assembly,
always hold instrument by the lower surface in the
front of the main unit and by the handles in the
rear panel.
Do not hold the key cover or top portion. Improper
handling can result in damage to the instrument or
personal injury.
1
2
F
Are there any parts left over?
Review the assembly procedure and correct any
errors.
Is the instrument clear of doors and other mov-
able fixtures?
Move the instrument to an appropriate location.
Does the instrument make a rattling noise when
you shake it?
Tighten all screws.
Are the pedal and power cords inserted securely
into the sockets?
Check the connection.
If the main unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the
assembly diagrams and retighten all screws.
34
ENGLISH
YDP-S30 Owner’s Manual
37
Index
Numerics
50 Piano Preset Songs .....................................................16
A
Accessories.........................................................................8
Assembly....................................................................34–36
C
Center Pedal ..............................................................14, 19
Connecting a Computer .................................................28
D
Damper Pedal ............................................................14, 19
DEMO/SONG .....................................................14, 15–17
Dual mode .......................................................................21
I
Initializing the Settings ...................................................32
K
Keyboard Stand .........................................................34–36
Keyboard Touch..............................................................24
L
Layering Two Voices (Dual mode) ................................21
Left Pedal ...................................................................14, 19
M
MASTER VOLUME..................................................12, 14
METRONOME .........................................................14, 23
MIDI ................................................................................27
MIDI [IN] [OUT] ...............................................14, 27, 28
MIDI cables .....................................................................27
MIDI connectors.......................................................27, 28
MIDI Data Format ..........................................................40
MIDI Implementation Chart..........................................44
Musicsoft Downloader....................................................31
P
PEDAL ....................................................................... 14, 19
PHONES.................................................................... 12, 14
PIANO/VOICE .........................................................14, 18
PLAY.......................................................................... 14, 26
Playing Back Recorded Performance Data....................26
Preset songs 50 Piano Preset Songs...........................16
R
REC............................................................................14, 25
Recording your Performance .........................................25
Reverb..............................................................................20
Reverb Depth ..................................................................20
Right Pedal ................................................................14, 19
S
SELECT –/+...............................................................14–16
Soft Pedal................................................................... 14, 19
Song .................................................................................16
Sostenute Pedal .........................................................14, 19
Specifications................................................................... 46
Stand ..........................................................................34–36
STANDBY/ON.......................................................... 10, 14
Start/Stop playback
50 Piano Preset Songs ...............................................16
Demo Songs...............................................................15
T
Tempo (metronome)......................................................23
Touch Sensitivity.............................................................24
Transmitting Song Data .................................................31
Transporting .....................................................................8
Transposition ..................................................................22
Troubleshooting.............................................................. 33
U
User Song.........................................................................25
UX16................................................................................28
V
Voice ................................................................................18
Volume (metronome) ....................................................24
35
ENGLISH
YDP-S30 Owner’s Manual
38
MEMO
36
YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones
39
Appendix/Anhang/
Annexe/Apéndice
This section introduces reference material.
In diesem Abschnitt finden Sie Referenzmaterial.
Cette section présente le matériel de référence.
En esta sección se incluye material de referencia.
MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI................... 40
MIDI Implementation Chart / MIDI Implementierung stabelle /
Feuille d’implantation MIDI / Gráfica de implementación MIDI ................................................................... 44
Specifications / Technische Daten / Caractéristiques techniques / Especificaciones .......................................... 46
145
YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones
40
MIDI Data Format / MIDI-Datenformat /
Format des données MIDI / Formato de datos MIDI
If you’re already very familiar with MIDI, or are using a
computer to control your music hardware with computer-
generated MIDI messages, the data provided in this section
can help you to control this instrument.
Falls Sie bereits mit MIDI vertraut sind oder einen
Computer zur Erzeugung von MIDI-Steuermeldungen für die
Instrumente verwenden, können Sie sich zur Steuerung des
YDP-S30 nach den im folgenden Abschnitt aufgeführten
Spezifikationen richten.
Si vous êtes très familier avec l’interface MIDI ou si vous
utilisez un ordinateur pour commander votre matériel de
musique au moyen de messages MIDI générés par
ordinateur, les données suivantes vous seront utiles et vous
aideront à commander le YDP-S30.
SI usted está ya familiarizado con MIDI, o si emplea una
computadora para controlar sus aparatos musicales con
mensajes MIDI generados por computadora, los datos
proporcionados en esta sección le ayudarán a controlar la
YDP-S30.
1. NOTE ON/OFF
Data format: [9nH] -> [kk] -> [vv]
9nH = Note ON/OFF event (n = channel number)
kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 /
Receive: 00H ~ 7FH = C-2 ~ G8)
vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)
Data format: [8nH] -> [kk] -> [vv] (reception only)
8nH = Note OFF event (n = channel number)
kk = Note number: 00H ~ 7FH = C-2 ~ G8)
vv = Velocity
2. CONTROL CHANGE
Data format: [BnH] -> [cc] -> [vv]
BnH = Control change (n = channel number)
cc = Control number
vv = Data Range
(1) Bank Select
ccH Parameter Data Range (vvH)
00H Bank Select MSB 00H:Normal
20H Bank Select LSB 00H...7FH
Bank selection processing does not occur until receipt of next
Program Change message.
(2) Main Volume
ccH Parameter Data Range (vvH)
07H Volume MSB 00H...7FH
(3) Expression (reception only)
ccH Parameter Data Range (vvH)
0BH Expression MSB 00H...7FH
(4) Damper
ccH Parameter Data Range (vvH)
40H Damper MSB 00H...7FH
(5) Sostenuto
ccH Parameter Data Range (vvH)
42H Sostenuto 00H-3FH:off, 40H-7FH:on
(6) Soft Pedal
ccH Parameter Data Range (vvH)
43H Soft Pedal 00H-3FH:off, 40H-7FH:on
(7) Effect1 Depth (Reverb Send Level)
ccH Parameter Data Range (vvH)
5BH Effect1 Depth 00H...7FH
Adjusts the reverb send level.
(8) Effect4 Depth (Variation Effect Send Level)
ccH Parameter Data Range (vvH)
5EH Effect4 Depth 00H...7FH
(9) RPN
65H RPN MSB
64H RPN LSB
06H Data Entry MSB
26H Data Entry LSB
60H Data Increment
61H Data Decrement
* Parameters that are controllable with RPN
• Coarse Tune
• Fine Tune
• Pitch Bend Range
3. MODE MESSAGES
Data format: [BnH] -> [cc] -> [vv]
BnH = Control event (n = channel number)
cc = Control number
vv = Data Range
(1) All Sound Off
ccH Parameter Data Range (vvH)
78H All Sound Off 00H
(2) Reset All Controllers
ccH Parameter Data Range (vvH)
79H Reset All Controllers 00H
Resets controllers as follows.
Controller Value
Expression 127 (max)
Damper Pedal 0 (off)
Sostenuto 0 (off)
Soft Pedal 0 (off)
(3) Local Control (reception only)
ccH Parameter Data Range (vvH)
7AH Local Control 00H (off), 7FH (on)
(4) All Notes Off
ccH Parameter Data Range (vvH)
7BH All Notes Off 00H
Switches OFF all the notes that are currently ON on the spec-
ified channel. Any notes being held by the damper or soste-
nuto pedal will continue to sound until the pedal is released.
(5) Omni Off (reception only)
ccH Parameter Data Range (vvH)
7CH Omni Off 00H
Same processing as for All Notes Off.
(6) Omni On (reception only)
ccH Parameter Data Range (vvH)
7DH Omni On 00H
Same processing as for All Notes Off.
(7) Mono (reception only)
ccH Parameter Data Range (vvH)
7EH Mono 00H
Same processing as for All Sound Off.
(8) Poly (reception only)
ccH Parameter Data Range (vvH)
7FH Poly 00H
Same processing as for All Sound Off.
When Control Change is turned OFF, Control Change mes-
sages will not be transmitted or received.
Local on/off, OMNI on/off are not transmitted. (The appropriate
note off number is supplied with “All Note Off transmission).
When a voice bank MSB/LSB is received, the number is
stored in the internal buffer regardless of the received order,
then the stored value is used to select the appropriate voice
when a program change message is received.
•Poly mode is always active. This mode will not change when
the instrument receives MONO/POLY mode message.
146
YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones
41
4. PROGRAM CHANGE
Data format: [CnH] -> [ppH]
CnH = Program event (n = channel number)
ppH = Program change number
P. C .#=Program Change number
When program change reception is turned OFF, no program
change data is transmitted or received.
When you specify a program change as a number in the
range of 0-127, specify a number that is one less than the pro-
gram change number listed above. For example, to specify
program change number 1, you would specify program
change 0.
5. Pitch Bend Change
[EnH] -> [ccH] -> [ddH]
ccH = LSB
ddH = MSB
6. SYSTEM REALTIME MESSAGES
[rrH]
F8H: Timing clock
FAH: Start
FCH: Stop
FEH: Active sensing
If an error occurs during MIDI reception, the Damper, Soste-
nuto, and Soft effects for all channels are turned off and an All
Note Off occurs.
7. SYSTEM EXCLUSIVE MESSAGES
(Universal System Exclusive)
(1) Universal Realtime Message
Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->
[llH] -> [mmH] -> [F7H]
MIDI Master Volume
Simultaneously changes the volume of all channels.
When a MIDI master volume message is received, the volume
only has affect on the MIDI receive channel, not the panel
master volume.
F0H = Exclusive status
7FH = Universal Realtime
7FH = ID of target device
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
llH = Volume LSB
mmH =
Volume MSB
F7H = End of Exclusive
or
F0H = Exclusive status
7FH = Universal Realtime
XnH = When n is received n=0~F, whichever is received.
X = don’t care
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
llH = Volume LSB
mmH =
Volume MSB
F7H = End of Exclusive
(2) Universal Non-Realtime Message (GM On)
General MIDI Mode On
Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] ->
[F7H]
F0H = Exclusive status
7EH = Universal Non-Realtime
7FH = ID of target device
09H = Sub-ID #1=General MIDI Message
01H = Sub-ID #2=General MIDI On
F7H = End of Exclusive
or
F0H = Exclusive status
7EH = Universal Non-Realtime
XnH = When received, n=0~F.
X = don’t care
09H = Sub-ID #1=General MIDI Message
01H = Sub-ID #2=General MIDI On
F7H = End of Exclusive
When the General MIDI mode ON message is received, the
MIDI system will be reset to its default settings.
This message requires approximately 50ms to execute, so
sufficient time should be allowed before the next message is
sent.
YDP-S30 MSB LSB
P.C.#
Grand Piano 1 0 122 1
Grand Piano 2 0 112 1
E.Piano 0 122 6
Harpsichord 0 122 7
Church Organ 0 123 20
Strings 0 122 49
Data Transmission Reception
F8H
Transmitted every
96 clocks
Received as 96-clock tempo timing
when MIDI clock is set to External.
FAH Song start
Song start
Not received when the MIDI clock is
set to Internal.
FCH Song stop
Song stop
Not received when the MIDI clock is
set to Internal.
FEH
Transmitted every
200 milliseconds
If a signal is not received via MIDI for
more than 400 milliseconds, the
same processing will take place for All
Sound Off, All Notes Off and Reset All
Controllers as when those signals are
received.
147
YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones
42
8. SYSTEM EXCLUSIVE MESSAGES (XG Standard)
(1) XG Native Parameter Change
Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] ->
[mmH] -> [llH] -> [ddH] -> [F7H]
F0H = Exclusive status
43H = YAMAHA ID
1nH = When received, n=0~F.
When transmitted, n=0.
4CH = Model ID of XG
hhH = Address High
mmH =
Address Mid
llH = Address Low
ddH = Data
|
F7H = End of Exclusive
Data size must match parameter size (2 or 4 bytes).
When the XG System On message is received, the MIDI sys-
tem will be reset to its default settings.
The message requires approximately 50ms to execute, so
sufficient time should be allowed before the next message is
sent.
(2) XG Native Bulk Data (reception only)
Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] ->
[bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->...->
[ccH] -> [F7H]
F0H = Exclusive status
43H = YAMAHA ID
0nH = When received, n=0~F.
When transmitted, n=0.
4CH = Model ID of XG
aaH = ByteCount
bbH = ByteCount
hhH = Address High
mmH =
Address Mid
llH = Address Low
ddH = Data
| |
| |
ccH = Check sum
F7H = End of Exclusive
Receipt of the XG SYSTEM ON message causes reinitializa-
tion of relevant parameters and Control Change values. Allow
sufficient time for processing to execute (about 50 msec)
before sending this instrument another message.
XG Native Parameter Change message may contain two or
four bytes of parameter data (depending on the parameter
size).
•For information about the Address and Byte Count values,
refer to Table 1 below. Note that the table’s Total Size value
gives the size of a bulk block. Only the top address of the
block (00H, 00H, 00H) is valid as a bulk data address.
9. SYSTEM EXCLUSIVE MESSAGES
(Digital Piano MIDI Format)
Data format:
[F0H] -> [43H] -> [73H] -> [xxH] -> [nnH] -> [F7H]
F0H = Exclusive status
43H = Yamaha ID
73H = Digital Piano ID
01H = Product ID (digital piano common)
xxH = Substatus
nn Control
02H Internal MIDI clock
03H External MIDI clock
06H Bulk Data (the bulk data follows 06H)
F7H = End of Exclusive
10.
SYSTEM EXCLUSIVE MESSAGES (Special Control)
Data format: [F0H] -> [43H] -> [73H] -> [66H] -> [11H] ->
[0nH] -> [ccH] -> [vvH] -> [F7H]
F0H = Exclusive status
43H = Yamaha ID
73H = Digital Piano ID
7FH = Extended Product ID
4BH = Product ID
11H = Special control
0nH = Control MIDI change (n=channel number)
cc = Control number
vv = Value
F7H = End of Exclusive
Control Channel ccH vvH
Metronome Always 00H 1BH 00H : off
01H :
02H : 2/4
03H : 3/4
04H : 4/4
05H : 5/4
06H : 6/4
7FH : No accent
Channel Detune
ch: 00H-0FH 43H (Sets the Detune value
for each channel)
00H-7FH
Voice Reserve
ch: 00H-0FH 45H 00H : Reserve off 7FH
: on*
*
When Volume, Expression is received for Reserve On, they
will be effective from the next Key On. Reserve Off is normal.
11. SYSTEM EXCLUSIVE MESSAGES (Others)
Data format:
[F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H]
-> [00H] -> [mmH] -> [
ll
H] -> [ccH] -> [F7H]
Master Tuning (XG and last message priority) simultaneously
changes the pitch of all channels.
F0H = Exclusive Status
43H = Yamaha ID
1nH = When received, n=0~F.
When transmitted, n=0.
27H = Model ID of TG100
30H = Sub ID
00H =
00H =
mmH = Master Tune MSB
llH = Master Tune LSB
ccH = don’t care (under 7FH)
F7H = End of Exclusive
148
YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones
43
<Table 1>
MIDI Parameter Change table (SYSTEM)
Address (H) Size (H) Data (H) Parameter Description Default value (H)
00 00 00 4 020C - 05F4(*1) MASTER TUNE -50 - +50[cent] 00 04 00 00
01 1st bit 3 - 0 bit 15 - 12 400
02 2nd bit 3 - 0 bit 11 - 8
03 3rd bit 3 - 0 bit 7 - 4
4th bit 3 - 0 bit 3 - 0
04 1 00 - 7F MASTER VOLUME 0 - 127 7F
7E 00 XG SYSTEM ON 00=XG sytem ON
7F 00 RESET ALL PARAMETERS 00=ON (receive only)
TOTAL SIZE 07
*1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents.
<Table 2>
MIDI Parameter Change table (EFFECT 1)
Refer to the “Effect MIDI Map” for a complete list of Reverb, Chorus and Variation type numbers.
Address (H) Size (H) Data (H) Parameter Description Default value (H)
02 01 00 2 00-7F REVERB TYPE MSB Refer to Effect MIDI Map 01(=HALL1)
00-7F REVERB TYPE LSB 00 : basic type 00
02 01 40 2 00-7F VARIATION TYPE MSB Refer to Effect MIDI Map 00(=Effect off)
00-7F VARIATION TYPE LSB 00 : basic type 00
• “VARIATION” refers to the EFFECT on the panel.
<Table 3>
MIDI Parameter Change table (MULTI PART)
Address (H) Size (H) Data (H) Parameter Description Default value (H)
08 nn 11 1 00 - 7F DRY LEVEL 0 - 127 7F
nn = Part Number
• Effect MIDI Map
REVERB
MSB LSB
ROOM 02H 10H
HALL 1 01H 10H
HALL 2 01H 11H
STAGE 03H 10H
OFF 00H 00H
EFFECT
MSB LSB
CHORUS 42H 10H
PHASER 48H 10H
TREMOLO 46H 10H
ROTARY SP 47H 10H
OFF 00H 00H
149
YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones
44
MIDI Implementation Chart
Function...
Transmitted
Recognized
Remarks
Basic Default
Default
Channel Changed
Mode
Messages
Altered
Note
Number :
True voice
Velocity Note ON
Note OFF
After
Touch
Key's
Ch's
Pitch Bend
Control
Change
0,32
1
7
10
11
6, 38
64,66,67
84
91,94
96-97
1 1-16
1-16
3
x
1-16
**************
0-127
**************
o 9nH,v=1-127
x
x *1
x
x *1
o
o
o
o
x *1
x *1
3
x
x
0-127
0-127
o 9nH,v=1-127
x
x
x
o 0-24 semi
o
o
o
o
o
o
o
o
o
o
Bank Select
Modulation
Main Volume
Panpot
Expression
Data Entry
Portament Control
Effect Depth
RPN Inc, Dec
RPN LSB, MSB
x *1
x *1
x *1
x *1
YAMAHA [ Digital Piano ]
Date :18-Jan-2007
Version : 1.0
Model YDP-S30 MIDI Implementation Chart
150
YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones
45
100-101
Prog
Change :
True #
System Exclusive
Common : Song Pos.
: Song Sel.
: Tune
System
Real Time
: Clock
: Commands
Aux
Messages
: Local ON/OFF
: Reset All Cntrls
: All Sound Off
: All Notes OFF
: Active Sense
: Reset
Notes:
x *1
o 0 - 127 o 0 - 127
**************
o
x
x
x
o
o
x
o
o
o
o
x
o
o
o
o
o
x
o
o
x
x
x
o
o
(123-125)
(122)
(121)
(120,126,127)
,
These Control Change messages are not transmitted via
panel operation, but may be transmitted during song
playback.
*1
Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO o : Yes
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO x : No
151
YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones
46
Specifications / Technische Daten /
Caractéristiques techniques / Especificaciones
*Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change
or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the
same in every locale, please check with your Yamaha dealer.
*Die technischen Daten und Beschreibungen in dieser Bedienungsanleitung dienen nur der Information. Yamaha Corp. behält sich
das Recht vor, Produkte oder deren technische Daten jederzeit ohne vorherige Ankündigung zu verändern oder zu modifizieren. Da
die technischen Daten, das Gerät selbst oder Sonderzubehör nicht in jedem Land gleich sind, setzen Sie sich im Zweifel bitte mit
Ihrem Yamaha-Händler in Verbindung.
*Les caractéristiques techniques et les descriptions du mode d’emploi ne sont données que pour information. Yamaha Corp. se
réserve le droit de changer ou modifier les produits et leurs caractéristiques techniques à tout moment sans aucun avis. Du fait que
les caractéristiques techniques, les équipements et les options peuvent différer d’un pays à l’autre, adressez-vous au distributeur
Yamaha le plus proche.
* Las especificaciones y descripciones de este manual del propietario tienen sólo el propósito de servir como información. Yamaha
Corp. se reserva el derecho a efectuar cambios o modificaciones en los productos o especificaciones en cualquier momento sin pre-
vio aviso. Puesto que las especificaciones, equipos u opciones pueden no ser las mismas en todos los mercados, solicite información
a su distribuidor Yamaha.
Item YDP-S30
Keyboard GHS 88 Keys (A-1 - C7)
Sound Source AWM Stereo Sampling
Polyphony 64 Notes Max.
Voice Selection 6
Effect Reverb
Volume Master Volume
Controls Dual, Metoronome, Transpose
Pedal Damper (with half-pedal effect), Sostenuto, Soft
Demo Songs 6 Demo Songs, 50 Piano Preset Songs
Recording Function One song 65 KB (approx. 11,000 notes)
Loading song data from
a computer
Up to 10 songs; Total maximum size 352 KB
Jacks/Connectors MIDI (IN/OUT), PHONES × 2
Main Amplifiers 6W × 2
Speakers Oval (12cm × 6cm) × 2
Dimensions (W × D × H)
With key cover closed: 1390mm x 299mm x 783mm [54-3/4" x 11-3/4" x 30-13/16"]
With key cover open: 1390mm x 299mm x 982mm [54-3/4" x 11-3/4" x 38-11/16"]
With anti-fall brackets attached, the depth is 370mm [14-9/16"]
Weight 36kg (79 lbs., 6 oz.)
Accessories
Owner’s Manual, “50 greats for the Piano” (Music Book), Quick Operation Guide,
Assembly parts
152
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instruc-
tions contained in this manual, meets FCC require-
ments. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT: When connecting this product to acces-
sories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions. Fail-
ure to follow instructions could void your FCC authori-
zation to use this product in the USA.
3. NOTE: This product has been tested and found to com-
ply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices. This equipment generates/
uses radio frequencies and, if not installed and used
according to the instructions found in the users manual,
may cause interference harmful to the operation of
other electronic devices. Compliance with FCC regula-
tions does not guarantee that interference will not occur
in all installations. If this product is found to be the
source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate
the problem by using one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfac-
tory results, please contact the local retailer authorized
to distribute this type of product. If you can not locate
the appropriate retailer, please contact Yamaha Corpo-
ration of America, Electronic Service Division, 6600
Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den
ar ansluten till vägguttaget, även om själva apparaten har stängts av.
ADVARSEL: Netspæendingen til dette apparat er IKKE afbrudt,
sålæenge netledningen siddr i en stikkontakt, som er t endt — også
selvom der or slukket på apparatets afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko
laitetta verkosta.
(standby)
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in accordance
with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured makings identifying the terminals in your
plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the termi-
nal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the
three pin plug.
This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. (2 wires)
153
For details of products, please contact your nearest Yamaha
representative or the authorized distributor listed below.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou
au distributeur le plus proche de vous figurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
Para detalles sobre productos, contacte su tienda Yamaha más cercana
o el distribuidor autorizado que se lista debajo.
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Scarborough, Ontario,
M1S 3R1, Canada
Tel: 416-298-1311
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620,
U.S.A.
Tel: 714-522-9011
MEXICO
Yamaha de México S.A. de C.V.
Calz. Javier Rojo Gómez #1149,
Col. Guadalupe del Moral
C.P. 09300, México, D.F., México
Tel: 55-5804-0600
BRAZIL
Yamaha Musical do Brasil Ltda.
Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi,
CEP 04534-013 Sao Paulo, SP. BRAZIL
Tel: 011-3704-1377
ARGENTINA
Yamaha Music Latin America, S.A.
Sucursal de Argentina
Viamonte 1145 Piso2-B 1053,
Buenos Aires, Argentina
Tel: 1-4371-7021
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Torre Banco General, Piso 7, Urbanización Marbella,
Calle 47 y Aquilino de la Guardia,
Ciudad de Panamá, Panamá
Tel: +507-269-5311
THE UNITED KINGDOM
Yamaha-Kemble Music (U.K.) Ltd.
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, England
Tel: 01908-366700
IRELAND
Danfay Ltd.
61D, Sallynoggin Road, Dun Laoghaire, Co. Dublin
Tel: 01-2859177
GERMANY
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Central Europe GmbH,
Branch Switzerland
Seefeldstrasse 94, 8008 Zürich, Switzerland
Tel: 01-383 3990
AUSTRIA
Yamaha Music Central Europe GmbH,
Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-60203900
CZECH REPUBLIC/SLOVAKIA/
HUNGARY/SLOVENIA
Yamaha Music Central Europe GmbH,
Branch Austria, CEE Department
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-602039025
POLAND
Yamaha Music Central Europe GmbH
Sp.z. o.o. Oddzial w Polsce
ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland
Tel: 022-868-07-57
THE NETHERLANDS/
BELGIUM/LUXEMBOURG
Yamaha Music Central Europe GmbH,
Branch Benelux
Clarissenhof 5-b, 4133 AB Vianen, The Netherlands
Tel: 0347-358 040
FRANCE
Yamaha Musique France
BP 70-77312 Marne-la-Vallée Cedex 2, France
Tel: 01-64-61-4000
ITALY
Yamaha Musica Italia S.P.A.
Viale Italia 88, 20020 Lainate (Milano), Italy
Tel: 02-935-771
SPAIN/PORTUGAL
Yamaha-Hazen Música, S.A.
Ctra. de la Coruna km. 17, 200, 28230
Las Rozas (Madrid), Spain
Tel: 91-639-8888
GREECE
Philippos Nakas S.A. The Music House
147 Skiathou Street, 112-55 Athens, Greece
Tel: 01-228 2160
SWEDEN
Yamaha Scandinavia AB
J. A. Wettergrens Gata 1
Box 30053
S-400 43 Göteborg, Sweden
Tel: 031 89 34 00
DENMARK
YS Copenhagen Liaison Office
Generatorvej 6A
DK-2730 Herlev, Denmark
Tel: 44 92 49 00
FINLAND
F-Musiikki Oy
Kluuvikatu 6, P.O. Box 260,
SF-00101 Helsinki, Finland
Tel: 09 618511
NORWAY
Norsk filial av Yamaha Scandinavia AB
Grini Næringspark 1
N-1345 Østerås, Norway
Tel: 67 16 77 70
ICELAND
Skifan HF
Skeifan 17 P.O. Box 8120
IS-128 Reykjavik, Iceland
Tel: 525 5000
OTHER EUROPEAN COUNTRIES
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-2312
TURKEY/CYPRUS
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
OTHER COUNTRIES
Yamaha Music Gulf FZE
LOB 16-513, P.O.Box 17328, Jubel Ali,
Dubai, United Arab Emirates
Tel: +971-4-881-5868
THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd.
25/F., United Plaza, 1468 Nanjing Road (West),
Jingan, Shanghai, China
Tel: 021-6247-2211
HONG KONG
Tom Lee Music Co., Ltd.
11/F., Silvercord Tower 1, 30 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel: 2737-7688
INDONESIA
PT. Yamaha Music Indonesia (Distributor)
PT. Nusantik
Gedung Yamaha Music Center, Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: 21-520-2577
KOREA
Yamaha Music Korea Ltd.
8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,
Kangnam-Gu, Seoul, Korea
Tel: 080-004-0022
MALAYSIA
Yamaha Music Malaysia, Sdn., Bhd.
Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,
Petaling Jaya, Selangor, Malaysia
Tel: 3-78030900
PHILIPPINES
Yupangco Music Corporation
339 Gil J. Puyat Avenue, P.O. Box 885 MCPO,
Makati, Metro Manila, Philippines
Tel: 819-7551
SINGAPORE
Yamaha Music Asia Pte., Ltd.
#03-11 A-Z Building
140 Paya Lebor Road, Singapore 409015
Tel: 747-4374
TAIWAN
Yamaha KHS Music Co., Ltd.
3F, #6, Sec.2, Nan Jing E. Rd. Taipei.
Taiwan 104, R.O.C.
Tel: 02-2511-8688
THAILAND
Siam Music Yamaha Co., Ltd.
891/1 Siam Motors Building, 15-16 floor
Rama 1 road, Wangmai, Pathumwan
Bangkok 10330, Thailand
Tel: 02-215-2626
OTHER ASIAN COUNTRIES
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-2317
AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 99 Queensbridge Street, Southbank,
Victoria 3006, Australia
Tel: 3-9693-5111
NEW ZEALAND
Music Houses of N.Z. Ltd.
146/148 Captain Springs Road, Te Papapa,
Auckland, New Zealand
Tel: 9-634-0099
COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-2312
NORTH AMERICA
CENTRAL & SOUTH AMERICA
EUROPE
AFRICA
MIDDLE EAST
ASIA
OCEANIA
HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-3273
[CL] 40
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
© 2007 Yamaha Corporation
703APAP5.3-01B0
Printed in China
WJ96040

Transcripción de documentos

DIGITAL PIANO ESPAÑOL FRANÇAIS Owner's Manual Bedienungsanleitung Mode d'emploi Manual de instrucciones DEUTSCH ENGLISH YDP-S30 For information on assembling the keyboard stand, refer to the instructions on pages 34-36 of this manual. Weitere Informationen über die Montage des Keyboard-Ständers erhalten Sie in den Anweisungen auf den Seiten 34-36 dieses Handbuchs. Pour obtenir les détails sur l'assemblage du pupitre du clavier, reportez-vous aux instructions figurant aux pages 34-36 de ce manuel. Para información sobre el montaje del soporte del teclado, consulte las instrucciones en las páginas 34-36 de este manual. EN DE FR ES SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25’ cord (or less) is 18 AWG. NOTE: The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units. This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. Some Yamaha products may have benches and / or accessory mounting fixtures that are either supplied with the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional fixtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended. Battery Notice: This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. This product may also use “household” type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, do not mix batteries with new, or with batteries of a different type. Batteries MUST be installed correctly. Mismatches or incorrect installation may result in overheating and battery case rupture. Warning: Do not attempt to disassemble, or incinerate any battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by the laws in your area. Note: Check with any retailer of household type batteries in your area for battery disposal information. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly. NAME PLATE LOCATION: The name plate is located on the bottom of the product. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. NOTICE: Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Model Serial No. Purchase Date PLEASE KEEP THIS MANUAL 92-BP (bottom) PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Water warning • Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings. • Use the specified adaptor (PA-5D, PA-150 or an equivalent recommended by Yamaha) only. Using the wrong adaptor can result in damage to the instrument or overheating. • Never insert or remove an electric plug with wet hands. • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. Fire warning ENGLISH Power supply/AC power adaptor • Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument. • Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. • Do not place the AC adaptor cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it. If you notice any abnormality • If the AC adaptor cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the instrument, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the adaptor plug from the outlet, and have the instrument inspected by qualified Yamaha service personnel. Do not open • Do not open the instrument or attempt to disassemble the internal parts or modify them in any way. The instrument contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Power supply/AC power adaptor • Do not place the instrument in an unstable position where it might accidentally fall over. • When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. • Before moving the instrument, remove all connected adaptor and other cables. • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. • Unplug the AC power adaptor when not using the instrument, or during electrical storms. • Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. • Use only the stand specified for the instrument. When attaching the stand or rack, use the provided screws only. Failure to do so could cause damage to the internal components or result in the instrument falling over. Location • Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components. • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise. 1 (3)-10 YDP-S30 Owner’s Manual 3 Connections Saving data Saving and backing up your data • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. • Data in the instrument’s internal memory can be lost due to operational errors or malfunction. Be sure to save any important data to external media via a computer connected to the instrument. (page 31) Maintenance • When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. Handling caution ENGLISH • Take care that the key cover does not pinch your fingers, and do not insert a finger or hand in any gaps on the key cover or instrument. • Never insert or drop paper, metallic, or other objects into the gaps on the key cover, panel or keyboard. If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. • Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. • Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use. Even when the power switch is in the “STANDBY” position, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the AC power adaptor from the wall AC outlet. (3)-10 2 4 YDP-S30 Owner’s Manual Welcome Thank you for purchasing the Yamaha Digital Piano! We recommend that you read this manual carefully so that you can take full advantage of the advanced and convenient functions of your new digital piano. We also recommend that you keep this manual in a safe, convenient place for future reference. About this Owner’s Manual This manual consists of three main sections: “Introduction,” “Reference” and “Appendix.” ENGLISH Introduction (page 2): Please read this section first. Reference (page 13): This section explains how to make detailed settings for the instrument’s various functions. Appendix (page 39): This section introduces reference material. * The illustrations as shown in this owner’s manual are for instructional purposes only, and may be different from the ones on your instrument. COPYRIGHT NOTICE This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, MIDI files and WAVE data. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES. Copying of the commercially available software is strictly prohibited except for your personal use. Trademarks: Windows is a registered trademark of Microsoft® Corporation. All other trademarks are the property of their respective holders. 3 • • YDP-S30 Owner’s Manual 5 Table of Contents Introduction SPECIAL MESSAGE SECTION ...................... 2 Welcome ...............................................................5 About this Owner’s Manual ........................ 5 Table of Contents ....................................... 6 ENGLISH Application Index........................................ 7 Transmitting Song Data between the Computer and the Digital Piano...... 31 Loading Song Data from a Computer to the Digital Piano .................................................. 31 Transmitting Song Data from the Digital Piano to a Computer..................................... 31 Backing up Data and Initializing the Settings .. 32 Accessories .................................................. 8 Troubleshooting........................................ 33 Maintenance ............................................... 8 Options ...................................................... 33 Features....................................................... 9 Keyboard Stand Assembly ........................ 34 Before Using the Digital Piano ................. 10 Turning the Power On.......................................10 Key cover and music rest ...................................11 Setting the Volume.............................................12 Using Headphones .............................................12 Index.......................................................... 37 Appendix MIDI Data Format ..................................... 40 MIDI Implementation Chart ..................... 44 Reference Specifications ............................................ 46 Part Names................................................ 14 Listening to the Demo Songs ................... 15 Listening to 50 Piano Preset Songs .......... 16 Listening to Songs Loaded from the Computer ......................................... 17 Selecting & Playing Voices........................ 18 Selecting Voices ..................................................18 Using the Pedals .................................................19 Adding Variations to the Sound – Reverb ........20 Layering Two Voices (Dual mode) ...................21 Transposition .....................................................22 Fine-tuning the Pitch .........................................22 Using the Metronome........................................23 Adjusting the Keyboard Touch (Touch Sensitivity) ........................................24 Recording your Performance.................... 25 Playing Back Recorded Performance Data .......26 Song Clear...........................................................26 Connecting MIDI Instruments .................. 27 About MIDI........................................................27 MIDI’s Capability...............................................27 Connecting the Digital Piano to a Computer ............................................ 28 MIDI Functions.......................................... 29 MIDI Transmit/Receive Channel Selection......29 Local Control ON/OFF......................................29 Program Change ON/OFF.................................30 Control Change ON/OFF ..................................30 4 6 YDP-S30 Owner’s Manual Application Index Use this index to find reference pages that may be helpful for your particular application and situation. Listening Listening to demo songs with different voices...................................................... “Listening to the Demo Songs” on page 15 Listening to songs from “50 Greats for the Piano” ...................................... “Listening to 50 Piano Preset Songs” on page 16 Listening to recorded performances................................................. “Playing Back Recorded Performance Data” on page 26 Listening to songs loaded from the computer ......................... “Listening to Songs Loaded from the Computer” on page 17 Using three pedals ....................................................................................................................... “Using the Pedals” on page 19 Shifting the pitch of the keyboard up or down in semitone steps ................................................ “Transposition” on page 22 Fine-tuning the pitch of the entire instrument when you play this instrument along with other instruments or CD music.......................................................................“Fine-tuning the Pitch” on page 22 Adjusting the key touch response (sensitivity) for changing the volume .............................................................................................. “Adjusting the Keyboard Touch (Touch Sensitivity)” on page 24 ENGLISH Playing Changing voices Viewing the list of voices............................................................................................................. “Selecting Voices” on page 18 Simulating a concert hall .................................................................... “Adding Variations to the Sound – Reverb” on page 20 Combining two voices.................................................................................... “Layering Two Voices (Dual mode)” on page 21 Practicing Practicing with an accurate and steady tempo .................................................................“Using the Metronome” on page 23 Recording Recording your performances ............................................................................... “Recording your Performance” on page 25 Erasing recorded song .......................................................................................................................... “Song Clear” on page 26 Connecting this instrument to other devices What is MIDI? ..................................................................................................... “Connecting MIDI Instruments” on page 27 Connecting the computer ............................................................ “Connecting the Digital Piano to a Computer” on page 28 Transmitting the recording of your performance to a computer ..........................................................................“Transmitting Song Data from the Digital Piano to a Computer” on page 31 Transmitting song data from a computer to the instrument .................................................................................. “Loading Song Data from a Computer to the Digital Piano” on page 31 Assembling 5 Assembling and disassembling this instrument..................................................“Keyboard Stand Assembly” on pages 34–36 YDP-S30 Owner’s Manual 7 Accessories • “50 Greats for the Piano” (Music Book) • Owner’s Manual This manual contains complete instructions for operating your digital piano. • Quick Operation Guide • AC Power Adaptor (Yamaha PA-5D, PA-150 or an equivalent)* ENGLISH * May not be included depending on your particular area. Check with your Yamaha dealer for details. Maintenance Clean the instrument using a dry or slightly damp soft cloth (wring well). CAUTION Do not use benzene, thinner, detergent, or chemically-treated cloth for cleaning. Do not place vinyl, plastic or rubber products on the instrument. Otherwise, the panel or keys may become discolored or degraded. CAUTION Before using this instrument, be sure to read “Precautions” on pages 3 – 4. Tuning Unlike an acoustic piano, this instrument does not need to be tuned. It always stays perfectly in tune. Transporting If you move to another location, you can transport this instrument along with your other belongings. You can move the unit as it is (assembled) or you can disassemble the unit before moving. Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the instrument to excessive vibration or shock. 6 8 YDP-S30 Owner’s Manual Features [DEMO/SONG] Listen to the playback of a demo song for each voice and 50 piano preset songs (page 15). [PIANO/VOICE] Select one of 6 internal sounds, including Grand Piano 1 and 2 (page 18). You can also layer two voices together (page 21) or select various reverb effects (page 20). ........ [MASTER VOLUME] ........ ........ Adjust the volume level using this control (page 12). ENGLISH The Yamaha YDP-S30 digital piano features a special “GHS (Graded Hammer Standard)” keyboard that offers natural grand-piano type playability. The GHS keyboard simulates the touch of a fine piano keyboard that changes key weight over the range of the entire keyboard from low to high, providing a luxurious and natural playability. The sound source of the YDP-S30 uses Yamaha’s original “AWM Stereo Sampling” tone-generation technology for rich and musical voices. Two of the piano voices, “Grand Piano 1” and “Grand Piano 2,” feature totally new samples recorded from a full-size concert grand piano. The “Electric Piano” voice features multiple samples for different velocities (Dynamic Sampling); that is, different samples are used depending on how fast or strong you strike the keys. This digital piano sounds much closer to a true acoustic piano. [METRONOME] Control the metronome functions (page 23). ........ [SELECT –/+] ........ [REC] Record your performance (page 25). [PLAY] Play back your recorded performance (page 26). Select a demo song for each voice, or one of the 50 piano preset songs (page 15 and 16). You can also select a different voice while the song playback is stopped. [DC-IN 12V] .. Connect the included power adaptor here (page 10). MIDI OUT PHONES 7 Front TO PEDAL DC IN 12V Connect a MIDI device to this jack to use various MIDI functions (pages 27– 28). (Connecting MIDI Instruments— page 27) ........ [PHONES] A set of standard stereo headphones can be plugged in here for private practice (page 12). .... IN MIDI [IN/OUT] ........ [PEDAL] Connect the pedal cord (page 34). Shows the [DC-IN 12V] and [PEDAL] jacks as seen when viewed from the rear of the instrument. YDP-S30 Owner’s Manual 9 Before Using the Digital Piano Turning the Power On 1. Connect the power adaptor. 1-1 Make sure that the [STANDBY/ON] button is set to STANDBY. 1-2 Insert the DC plug on the power adaptor into the [DC IN 12V] jack. 1-3 Insert the AC plug on the power adaptor into a wall AC outlet. ENGLISH [DC IN 12V] jack 1-2 1-3 adaptor AC outlet WARNING Use the specified adaptor (PA-5D, PA-150, or an equivalent recommended by yamaha) only. The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. WARNING Unplug the AC Power Adaptor when not using the instrument, or during electrical storms. 2. Turn the power on. Press the [STANDBY/ON] button. • The power indicator located below the left end of the keyboard lights up. [STANDBY/ON] Power indicator To turn the power off, press the [STANDBY/ON] button again. • The power indicator turns off. CAUTION Even when the switch is in the “STANDBY” position, electricity is still flowing to the instrument at a minimum level. When not using the instrument for an extended period of time, be sure to unplug the AC power adaptor from the wall AC outlet. 8 10 YDP-S30 Owner’s Manual Key cover and music rest Opening the key cover ENGLISH 1. Hold the ledge of the key cover top with both hands, then open the key cover slowly. 2. Fold the front panel strip. 3. Unfold the music rest. Closing the key cover 1. Fold the music rest. 2. Unfold the front panel strip. 3. Hold the key cover with both hands and close it slowly. CAUTION 9 Before closing the key cover, be sure to fold the music rest and unfold the front panel strip. YDP-S30 Owner’s Manual 11 Setting the Volume When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level. The level decreases. The level increases. CAUTION ENGLISH Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged. Using Headphones Connect a pair of headphones to one of the [PHONES] jacks. Two [PHONES] jacks are provided. You can connect two sets of standard stereo headphones. (If you are using only one pair of headphones, you can plug them into either jack.) bottom surface PHONES standard stereo phone plug 10 12 YDP-S30 Owner’s Manual ENGLISH Reference This section explains how to make detailed settings for this instrument’s various functions. Part Names................................................................ 14 Keyboard Stand Assembly ....................................... 34 Listening to the Demo Songs................................... 15 Index ......................................................................... 37 Listening to 50 Piano Preset Songs.......................... 16 Listening to Songs Loaded from the Computer ..... 17 Selecting & Playing Voices ....................................... 18 Selecting Voices ........................................................... 18 Using the Pedals .......................................................... 19 Adding Variations to the Sound – Reverb.................. 20 Layering Two Voices (Dual mode) ............................. 21 Transposition............................................................... 22 Fine-tuning the Pitch .................................................. 22 Using the Metronome ................................................. 23 Adjusting the Keyboard Touch (Touch Sensitivity) .. 24 Recording your Performance................................... 25 Playing Back Recorded Performance Data ................ 26 Song Clear ................................................................... 26 Connecting MIDI Instruments ............................... 27 About MIDI................................................................. 27 MIDI’s Capability........................................................ 27 Connecting the Digital Piano to a Computer ................ 28 MIDI Functions........................................................ 29 MIDI Transmit/Receive Channel Selection ............... 29 Local Control ON/OFF............................................... 29 Program Change ON/OFF ......................................... 30 Control Change ON/OFF ........................................... 30 Transmitting Song Data between the Computer and the Digital Piano....................................................... 31 Loading Song Data from a Computer to the Digital Piano ........................................................................ 31 Transmitting Song Data from the Digital Piano to a Computer................................................................. 31 Backing up Data and Initializing the Settings ........... 32 11 Troubleshooting ....................................................... 33 YDP-S30 Owner’s Manual 13 Part Names 2 3 5 4 # 6 $ 8 % ENGLISH 7 1 DC IN 12V TO PEDAL IN MIDI PHONES ) ! @ OUT 9 1 2 3 4 5 6 7 8 [STANDBY/ON] ............................. P10 [MASTER VOLUME] ....................... P12 [METRONOME]............................. P23 [DEMO/SONG] ............................. P15 [PIANO/VOICE] ........................P18–21 [SELECT –/+] ..................... P15, 16, 18 [REC]............................................. P25 [PLAY] ..................................... P25, 26 9 0 A B C D E MIDI [IN]/[OUT] ........................... P27 [PHONES] ..................................... P12 [PEDAL]......................................... P34 [DC-IN 12V].................................. P10 Soft (Left) Pedal ............................ P19 Sostenuto (Center) Pedal .............. P19 Damper (Right) Pedal ................... P19 12 14 YDP-S30 Owner’s Manual Listening to the Demo Songs Demo songs are provided that effectively demonstrate each of this instrument’s voices. Procedure 1. Turn on the power. 2. Start playing back a demo song. Refer to the voice list on page 18 for more information on the characteristics of each preset voice. ENGLISH (In case the power is not turned ON) Press the [STANDBY/ON] button. When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level. Press the [DEMO/SONG] button. The demo song for the currently-selected voice starts playing. 3. Select and play a demo song. While a demo song is playing, press the [SELECT –/+] button to select and play the next demo song. If you wish to select a particular demo song from 6 voice demo songs, while holding down the [DEMO/SONG] button, press one of the C1–F1 keys. The selected demo song starts to play. Starting with the selected song, the playback of the demo songs will continue in the following sequence: other voice demo songs, followed by 50 piano preset songs, and any songs loaded from the computer. The sequence then returns to the first demo song and repeats until you stop it. C1 The lowest key The demo songs will not be transmitted via MIDI. F1 Demo Songs Each of the 6 voices features its own demo song that showcases the corresponding voice. Please refer to “Selecting Voices” on page 18. The demo songs listed below are re-arranged excerpts from the original compositions. The other demo songs are Yamaha’s original pieces (©2005 Yamaha Corporation). Key Voice Name Title Composer C1 GrandPiano1 “Eintritt” Waldszenen Op.82 R. Schumann D1 Harpsichord Gavotte J.S. Bach  Adjusting the Volume Use the [MASTER VOLUME] control to adjust the volume. 4. Stop the Voice demo. 13 Press the [DEMO/SONG] button to stop playback. YDP-S30 Owner’s Manual 15 Listening to 50 Piano Preset Songs This digital piano provides performance data for 50 piano songs as well as voice demo songs. You can simply listen to these songs. You can also refer to the included “50 Greats for the Piano” that contains scores for 50 piano preset songs. Procedure ENGLISH 1. Select and play back a piano preset song. The number of each piano preset song is assigned to the C2-C 6 keys.  While holding down the [DEMO/SONG] button, press one of the C2-C 6 keys to select a song to play back. The selected piano song starts to play. To play all preset songs consecutively in sequence, while holding down the [DEMO/SONG] button, press the D6 key. 1st song 10th song 20th song C2 C3 C4 30th song 40th song C5  50th song (C 6) Consecutive playback (D6) The highest key Press the [SELECT –/+] button to change to the next piano song. Song: On this instrument, performance data is called a “Song.” This includes demo songs and 50 piano preset tunes. You can play the keyboard along with the preset song. You can change the voice playing on the keyboard. The default tempo is automatically selected whenever a new preset song is selected, and when a new preset song begins playback in the continuous playback. To adjust the tempo of the preset song playback, see page 23. Adjusting the Volume Use the [MASTER VOLUME] control to adjust the volume. 2. Stop playback. To stop the song during playback, press the [DEMO/SONG] button. • To continue playing other songs, see procedure 1 above. When you select a different song (or a different song is selected during chained playback), an appropriate reverb type will be selected accordingly. The 50 piano preset songs will not be transmitted via MIDI. 14 16 YDP-S30 Owner’s Manual Listening to Songs Loaded from the Computer You can transfer song data from your computer to this instrument and play back the songs. (See page 31 for more information on loading song data from the computer.) 1. Select and play back a song.  Song numbers (1 through 10) are assigned to the D 6-C7 keys (see the illustration below).  While holding down the [DEMO/SONG] button, press one of the D 6-C7 keys to select a song to play back. The selected song starts to play. 1st song 10th song You can load up to 10 songs or up to 352 KB of data from the computer. Use the following table to write down the song titles you loaded from the computer. Key  Song title ENGLISH Procedure D6 E6  D6 C7 F6  F6 Adjusting the Volume G6 Use the [MASTER VOLUME] control to adjust the volume while listening to the song.  G6 A6  2. Stop playback. A6 To stop the song during playback, press the [DEMO/SONG] button. B6 C7 Selecting a Song Playback Channel If a song loaded from the computer uses a voice that is not supported by this instrument, the originally-assigned voice may not be reproduced accurately. In this case, switching the song playback channel from “All” to “1 + 2” may improve the tone to more natural sound. Selecting all song playback channels: While pressing and holding down the [DEMO/SONG] button and the [PIANO/ VOICE] button simultaneously, press the B6 key. All channels 1 through 16 will produce the sound. B6 The top key Selecting 1 + 2 song playback channels: While pressing and holding down the [DEMO/SONG] button and the [PIANO/ VOICE] button simultaneously, press the C7 key. Channels 1 + 2 will produce the sound. C7 15 The top key YDP-S30 Owner’s Manual 17 Selecting & Playing Voices Selecting Voices Procedure Press and release the [PIANO/VOICE] button to select the Grand Piano 1 voice. ENGLISH While holding down the [PIANO/VOICE] button, press one of the C1-F1 keys to select a voice. Alternatively, you can also select a voice by pressing [PIANO/VOICE] button, then press the [SELECT –/+] button repeatedly to select a different voice. Turn the [MASTER VOLUME] control to adjust the volume level while playing the keyboard.   To understand the characteristics of various voices, listen to demo songs for each voice (page 15). C1 D1 The lowest key Voice: On this instrument, a voice means a “tone” or “tonal color.” C1 D1 E1 F1 Key Voice Name Description C1 Grand Piano 1  Recorded samples from a full concert grand piano. Perfect for classical compositions as well as any other style that requires acoustic piano. C1 Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music. D1 E.Piano An electronic piano sound created by FM synthesis. Good for popular music. D1 Harpsichord The definitive instrument for baroque music. Since the strings of a harpsichord are plucked, there is no touch response. E1 Church Organ This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music from the Baroque period. F1 Strings Spacious and large-scale string ensemble. Try combining this voice with piano in DUAL mode.  Selecting a voice automatically engages the best-suited reverb type and depth (page 20) for that particular voice. 16 18 YDP-S30 Owner’s Manual Using the Pedals Sostenuto (Center) Pedal If you play a note or chord on the keyboard and press the sostenuto pedal while the note(s) are held, those notes will sustain as long as you hold the pedal (as if the damper pedal had been pressed) but all subsequently played notes will not be sustained. This makes it possible to sustain a chord, for example, while other notes are played “staccato.”      When you press the damper pedal here, the notes you play before you release the pedal sustain longer.      If the damper pedal doesn’t work, make sure that the pedal cord is properly plugged into the main unit (page 34). While playing the piano with Sustain and you want to slightly mute the sustained sound, release the foot pedal from maximum position to half position. Organ and string voices will continue to sound for as long as the sostenuto pedal is depressed. When you press the sostenuto pedal here while holding the note, the note will sustain as long as you hold the pedal. ENGLISH Damper (Right) Pedal The damper pedal functions as a selective damper pedal by sustaining certain notes. Hold down a note, press the damper pedal, then release the key. The note will continue to sound until you release the damper pedal. The damper pedal features a half-pedal function. 17 Soft (Left) Pedal The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not affect notes that are already playing when it is pressed. YDP-S30 Owner’s Manual 19 Adding Variations to the Sound – Reverb This control enables you to select various digital reverb effects that add extra depth and expression to the sound to create a realistic acoustic ambience. Procedure While holding down the [PIANO/VOICE] button, press one of the C2–E2 keys to select a reverb type.   ENGLISH C2D2 The lowest key Key Reverb Type C2 D2 E2 Description C2 Room  This setting adds a continuous reverb effect to the sound, similar to the acoustic reverberation you would hear in a room. C2 Hall1 For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates the natural reverberation of a small-size concert hall. D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effect simulates the natural reverberation of a large concert hall. D2 Stage Simulates the reverb of a stage environment. E2 Off No effect is applied.  Adjusting Reverb Depth  Adjust the reverb depth for the selected voice by pressing one of the C3–G 4 keys while holding down the [PIANO/VOICE] button. The depth range is from 0 through 20.  G 4: depth 20 The default reverb type (including OFF) and depth settings are different for each voice. depth 0: depth 20: The lowest key C3: depth 0 no effect maximum reverb depth A4 The depth value increases as you press higher keys. While holding down the [PIANO/VOICE] button, press the A4 key to set the reverb to the depth most suitable for the selected voice. 18 20 YDP-S30 Owner’s Manual Layering Two Voices (Dual mode) You can layer two voices and play them simultaneously to create a thicker and more supple sound. Procedure While holding down the [PIANO/VOICE] button, press two keys in the range of C1 through F1 simultaneously to select the two desired voices. Alternatively, while holding down the [PIANO/VOICE] button, press and hold down one key, then press another. Refer to “Selecting & Playing Voices” on page 18 for information on the voices that are assigned to the keys. The lowest key C1 You cannot assign the same voice to Voice 1 and Voice 2 simultaneously in Dual mode. Reverb in Dual Mode The reverb type assigned to Voice 1 will take priority. (If the reverb assigned to Voice 1 is set to OFF, the reverb assigned to Voice 2 will be in effect.) The reverb depth setting (page 20) will be applied only to Voice 1. F1 ENGLISH 1. Engage Dual mode. The voice assigned to the lower key will be designated as Voice 1, and the voice assigned to the higher key will be designated as Voice 2. You can make the following settings for Voices 1 and 2 in Dual mode: Setting the Octave You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 independently. Depending on which voices you combine in Dual mode, the combination may sound better if one of the voices is shifted up or down an octave. While holding down the [PIANO/VOICE] button, press one of the C5–F5 keys. C5 F5 The highest key  C5 key: –1 (Voice 1), C 5 key: 0 (Voice 1), D5 key: +1(Voice 1),  D 5 key: –1 (Voice 2), E5 key: 0 (Voice 2), F5 key: +1(Voice 2) Setting the Balance You can adjust the volume balance between two voices. For example, you can set one voice as the main voice with a louder setting, and make the other voice softer.   While holding down the [PIANO/VOICE] button, press one of the F 5–F 6 keys. A setting of “0” produces an equal balance between the two Dual mode voices. Settings below “0” increases the volume of Voice 2 in relation to Voice 1, and settings above “0” increases the volume of Voice 1 in relation to Voice 2.  F5 -6 -4 -2 C6 +1 +3  F6 +6 -5 -3 -1 0 +2 +4 +5 The highest key 2. Exit Dual mode and return to normal play mode. 19 While holding down the [PIANO/VOICE] button, press one of the C1–F1 keys. YDP-S30 Owner’s Manual 21 Transposition Your digital piano’s Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone intervals up to a maximum of six semitones, and lets you easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if you set the transposition amount to “5,” playing key C produces pitch F. In this way, you can play a song as though it were in C major, and this instrument will transpose it to the key of F. Procedure While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons, press one of   the F 2–F 3 keys to set the desired amount of transposition.  F2 ENGLISH -6 -4 -2 C3 +1 +3  F3 +6 Transpose: Changing the key signature. On this instrument, transposing shifts the pitch of the entire keyboard. -5 -3 -1 0 +2 +4 +5 Transpose Transpose down. Normal up. pitch. [DEMO/SONG] + [PIANO/VOICE] + C3 key: Plays normal keyboard pitch. [DEMO/SONG] + [PIANO/VOICE] + B2 key (white key to the left of C3): Transposes the pitch down by one semitone.  [DEMO/SONG] + [PIANO/VOICE] + B 2 key (the first black key to the left of C3): Transposes the pitch down a whole tone (two semitones).  [DEMO/SONG] + [PIANO/VOICE] + F 2 key: Transposes the pitch down by six semitones.  [DEMO/SONG] + [PIANO/VOICE] + C 3 key (black key to the right of C3): Transposes the pitch up by one semitone. [DEMO/SONG] + [PIANO/VOICE] + D3 key (the first white key to the right of C3): Transposes the pitch up a whole tone (two semitones).  [DEMO/SONG] + [PIANO/VOICE] + F 3 key: Transposes the pitch up by six semitones. Fine-tuning the Pitch You can fine-tune the pitch of the entire instrument. This function is useful when you play the digital piano along with other instruments or CD music. Procedure Raising the pitch (0.2Hz steps) Hold down the A-1, B-1 and C0 keys, and press any key in the range from C3 to B3. Lowering the pitch (0.2Hz steps) Hold down the A-1, B-1 and C#0 keys, and press any key in the range from C3 to B3. Resetting to the default pitch Hold down the A-1, B-1, C0 and C#0 keys, and press any key in the range from C3 to B3. To tune up B-1 A-1 C0 To tune down B-1  A-1 C 0 22 YDP-S30 Owner’s Manual B3 20 Setting range: 427.0-453.0 Hz Default pitch: 440.0 Hz To restore default pitch B-1 C0  A-1 C0 C3 Hz (Hertz): This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. Using the Metronome Your digital piano features a built-in metronome (a device that keeps an accurate tempo) that is convenient for practicing. Procedure 1. Start the metronome. Press the [METRONOME] button to turn on the metronome. Determines the Time Signature While holding down the [METRONOME] button, press one of the C3–F3 keys.    ENGLISH C3 D3 The highest key C3 D3 E3 F3  C3 key: No downbeat, C 3 key: 2/4, D3 key: 3/4, D 3 key: 4/4, E3 key: 5/4, F3 key: 6/4 Adjusting the Tempo The tempo of the metronome and preset song playback can be set from 32 to 280 beats per minute. A number is assigned to each of the following keys. While holding down the [METRONOME] button, press a sequence of C4–A4 keys to specify a three-digit number. Select a number starting from the left-most digit. For example, to set the tempo “95,” press the C4 (0), A4 (9) and F4 (5) keys in sequence. Increasing the tempo value in steps of one:  While holding down the [METRONOME] button, press the C 5 key. Decreasing the tempo value in steps of one: While holding down the [METRONOME] button, press the B4 key. Increasing the tempo value in steps of ten: While holding down the [METRONOME] button, press the D5 key. Decreasing the tempo value in steps of ten:  While holding down the [METRONOME] button, press the A 4 key.  A4 1 3  C5 6 8 0 2 4 5 7 9 C4 A4 B4 C5 D5 The highest key 21 Resetting the tempo to default: While holding down the [METRONOME] button, press the C5 key. YDP-S30 Owner’s Manual 23 Adjusting the Volume You can change the volume of the metronome sound. While holding down the [METRONOME] button, press one of the C1–G2 keys to determine the volume. The lowest key C1 G2 The volume level increases as you press higher keys. 2. Stop the metronome. ENGLISH Turn off the metronome by pressing the [METRONOME] button. Adjusting the Keyboard Touch (Touch Sensitivity) You can adjust the volume level that changes depending on how fast or strong you hit the keys. The following four settings are available. A6 ..............................The volume level does not change at all regardless of whether you play the keyboard soft or hard.  A 6 .............................The volume level does not change much when you play the keyboard soft or hard. B6 ..............................This is the standard piano touch response. (This is the default setting.) C7 ..............................The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic and dramatic expression. You have to hit the keys hard to produce a loud sound. This setting is disabled with some voices, such as an organ sound. Procedure While holding down the [PIANO/VOICE] button, press one of the A6-C7 keys to select the desired touch sensitivity. A6 C7 22 24 YDP-S30 Owner’s Manual Recording your Performance Your digital piano’s recording function enables you to record your performance of one song. The recorded performance is called the “user song.” Follow the steps below to record and play back your performance. Audio recording and data recording ENGLISH Cassette tape recordings use a different data format than this instrument. Cassette tapes record audio signals. On the other hand, this instrument records information about the notes and voices being played and about the timing and tempo of those notes. It does not record audio signals. When you play back a recorded performance on this instrument, its internal tone generator reproduces the sound according to the recorded information. CAUTION Be careful not to erase the recorded data: After you record a performance on this instrument, the [PLAY] button indicator lights up. When this indicator remains on, recording another performance will erase the recorded data. Procedure 1. Select a voice and other settings for the recording. While holding down the [PIANO/VOICE] button, press one of the C1–F1 keys to select the desired voice(s). (See page 18.) If you desire, you can select other settings, such as the reverb setting. Use the [MASTER VOLUME] control to adjust the volume to a comfortable listening level. You can also use the [MASTER VOLUME] control to adjust the volume level during playback. 2. Engage Record mode. Press the [REC] button. The [REC] button indicator lights up. Press the [REC] button again if you wish to cancel Record mode. 3. Start recording. Recording starts as soon as you play the keyboard. Alternatively, press the [PLAY] button to start recording. 4. Stop recording. Press the [REC] button. You cannot engage Record mode while a demo song is playing. Recording capacity “Recording capacity” is the maximum amount of performance data that you can record. This instrument’s recording capacity is 65 KB (approximately 11,000 notes). Changing the settings for the recorded user song To change the settings for the recorded user song, engage Record mode, change the settings as you desire, then stop recording without playing the keyboard. For example, if you wish to change the voice of the user song, press the [REC] button to engage Record mode (see Step 2), then select a different voice (see Step 1). Without playing the keyboard, press the [REC] button to stop recording (see Step 4). CAUTION Do not turn off the power to this instrument while it is recording the data in its internal memory (that is, while the [REC] and [PLAY] button indicators are flashing). Otherwise, all recorded data, including the data being recorded, will be lost. 23 You can save the recorded user song to a computer. You can also load the user song data from a computer and play it back on this instrument. (See page 31.) YDP-S30 Owner’s Manual 25 Playing Back Recorded Performance Data Procedure 1. Start the playback. ENGLISH Press the [PLAY] button. 2. Stop the playback. When the user song finishes playing back, this instrument automatically returns to the previous mode. To stop the playback, press the [PLAY] button. Song Clear The Song clear operation completely erases the recorded song. Procedure 1. Engage Record mode. Press the [REC] button. The record button indicator lights up. Press the [REC] button again if you wish to cancel the clear operation. 2. Start Clear Press the [PLAY] button and then press the [REC] button. 24 26 YDP-S30 Owner’s Manual Connecting MIDI Instruments Your digital piano features MIDI jacks. Using the MIDI functions enables you to access a variety of musical genres. MIDI (Musical Instrument Digital Interface) is a global format standard for performance data transmission and reception between electronic musical instruments. Connecting musical instruments that support MIDI via MIDI cables enables you to transfer performance and setting data between multiple musical instruments. Using MIDI, you can also achieve more advanced performances than using just a single musical instrument. You need a dedicated MIDI cable (optional) to make a MIDI connection. You can purchase MIDI cables at musical instrument stores. If you connect a very long MIDI cable, data transmission errors may result. Use a MIDI cable of 15 meters or less. MIDI IN ENGLISH About MIDI Since MIDI data that can be transmitted or received varies depending on the type of MIDI device, check the “MIDI Implementation Chart” to find out what MIDI data and commands your devices can transmit or receive. This instrument’s MIDI Implementation Chart appears on page 44. Before connecting a MIDI device to this instrument, first turn off the power to both this instrument and the MIDI device. After connecting them, turn on the power to the MIDI device first, then turn on the power to this instrument. OUT MIDI’s Capability MIDI functions enable you to transfer performance data between MIDI devices, load song data from a connected computer to your instrument, and transmit and save user song data to a computer. ● Transferring performance data to and from another MIDI device MIDI OUT jack MIDI IN jack You cannot transmit the voice demo songs and the 50 piano preset songs from this instrument to another MIDI device. MIDI IN jack Optional MIDI OUT MIDI cables jack MIDI instrument YDP-S30 ● Transferring MIDI data to and from a computer OUT USB port Optional USB-MIDI interface (e.g., Yamaha UX16) IN MIDI OUT jack YDP-S30 25 Computer For more information on the transmission and reception of song data, refer to “Transmitting Song Data between the Computer and the Digital Piano” on page 31. MIDI IN jack YDP-S30 Owner’s Manual 27 Connecting the Digital Piano to a Computer Connecting the digital piano to a computer using the MIDI jacks enables you to transfer MIDI data between the piano and the computer. In addition, installing Musicsoft Downloader on the computer enables you to transfer song data between the instrument and the computer (page 31). ENGLISH When this instrument is used as a tone module, performance data with voices that are not found on this instrument will not be played correctly. Before you connect this instrument to a computer, first turn off the power to both this instrument and the computer. After you make the connections, turn on the power to the computer first, then turn on the power to this instrument. An example of connecting this instrument to the USB port on a computer Use an optional USB-MIDI interface (such as a Yamaha UX16) to connect this instrument’s MIDI jacks to the computer’s USB port. You must install the USB-MIDI driver on the computer correctly so that you can control your MIDI instrument from the computer. The USB-MIDI driver is a software application that enables MIDI signals to be transmitted between the sequence software on the computer and the connected MIDI instrument. For more information, refer to the user’s manual that came with the USB interface device. MIDI Computer IN OUT IN OUT YDP-S30 Connecting this instrument to the computer using a USB-MIDI interface Turn off the power to this instrument. Connect the MIDI OUT cable from the USB-MIDI interface to this instrument’s MIDI IN jack, and connect the MIDI IN cable from the USB-MIDI interface to this instrument’s MIDI OUT jack. The connection between this instrument and the computer has now been established. Turn on the power to this instrument and try to transfer MIDI data to or from the computer. For more information on connecting the YAMAHA UX16, refer to the user’s manual that came with the UX16. You must install a software application on the computer to be able to transfer MIDI data between this instrument and a computer. 26 28 YDP-S30 Owner’s Manual MIDI Functions You can make detailed adjustments to MIDI settings. In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer. This parameter enables you to specify the channel on which the digital piano transmits or receives MIDI data. Procedure Setting the transmit channel While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C1-E2 keys. Default setting: Channel 1 Setting the receive channel While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C4-F5 keys. Default setting: ALL  E2 E5 D2 C1 2 4 7 9 11 C4 14 16 F5 2 4 1 3 5 6 8 10 12 13 15 7 9 11 14 16 1 3 5 6 8 10 12 13 15 1+2 For setting the transmit channels.  (C1–D 2) OFF For setting the receive channels. (C4–F5) For ALL mode In Dual mode, Voice 1 data is transmitted on its specified channel and Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In this mode, no data is transmitted if the transmit channel is set to “OFF.” ALL: A “Multi-timbre” Receive mode is available. In this mode, this instrument receives different parts from the connected MIDI device on any or all 16 MIDI channels and plays multi-channel song data. 1+2: ENGLISH MIDI Transmit/Receive Channel Selection A “1+2” Receive mode is available. It allows simultaneous reception on channels 1 and 2 only, enabling this instrument to play 1 and 2 channel song data received from a music computer or sequencer. Program change and other like channel messages received will not affect this instrument’s panel settings or the notes you play on the keyboard. Local Control ON/OFF “Local Control” refers to the fact that, normally, the keyboard of this digital piano controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the keyboard of this digital piano does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT jack when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN jack. Procedure Data for the demo song and 50 piano preset songs cannot be transmitted via MIDI. CAUTION When Local control is turned OFF, the keyboard of this instrument does not play the internal voices. While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the C6 key. Pressing the C6 key repeatedly toggles between Local Control On and Off. C6 27 The highest key YDP-S30 Owner’s Manual 29 Program Change ON/OFF Normally this instrument will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondingly-numbered voice to be selected on the corresponding channel (the keyboard voice does not change). This instrument will normally also send a MIDI program change number whenever one of its voices is selected, causing the correspondingly-numbered voice or program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel program change number reception and transmission so that voices can be selected on this instrument without affecting the external MIDI device. For information on program change numbers for each of this instrument’s voices, refer to page 40 in the MIDI Data Format section. ENGLISH Procedure While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously,   press the C 6 key. Pressing the C 6 key repeatedly toggles between Program Change On and Off.  C6 The highest key Control Change ON/OFF MIDI Control Change data refers to MIDI information related to performance expression (such as damper pedal information). You can transmit MIDI Control Change data from this instrument to control the operation of a connected MIDI device. (For example, if you operate this instrument’s damper pedal, this instrument will transmit MIDI Control Change data.) On the other hand, MIDI performance data received on this instrument from a connected MIDI device will respond to MIDI Control Change data received from the MIDI device at the same time. (However, the voice you are currently playing on the keyboard will not respond to the MIDI Control Change data.) The ability to transmit and receive MIDI Control Change data is sometimes very useful. Turn Control Change On if it is convenient for you to have this capability. Turn Control Change Off if you rather prefer not to have this capability. For information on control changes that can be used with this instrument, refer to the MIDI Data Format on page 40. Procedure While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the D6 key. Pressing the D6 key repeatedly toggles between Control Change On and Off. D6 The highest key 28 30 YDP-S30 Owner’s Manual Transmitting Song Data between the Computer and the Digital Piano In addition to the demo songs and the 50 piano preset songs stored in this instrument, you can play data for other song by loading it from a connected computer. To be able to use this function, you must first download Musicsoft Downloader from Yamaha website at the following URL, and install it on your computer. http://music.yamaha.com/download/ You can download free Musicsoft Downloader from the Yamaha website. ● System requirement for Musicsoft Downloader Please visit the URL above to get the latest information on the supported computer systems. • OS : Windows 98SE/Me/2000/XP Home Edition/XP Professional : Intel® Pentium® or Celeron® chip of 233MHz or higher (500MHz or higher recommended) • Memory : 64MB or higher (256MB or higher recommended) • Available hard disk capacity: 128MB or higher (512MB or higher recommended) • Display : 800 × 600 High Color (16-bit) • Others ENGLISH • CPU : Microsoft® Internet Explorer® version 5.5 or higher Loading Song Data from a Computer to the Digital Piano You can load piano song data from a computer to this instrument. Also, after you record your performance on this instrument and save the recording to a computer, you can load the recording back to the instrument. This instrument can read MIDI data in SMF Format 0. However, if such data includes any information for functions that are not supported by this instrument, the instrument will not play the data correctly. For more information on loading song data from a computer to this instrument, please refer to “Transferring Data Between the Computer and Instrument (for unprotected data)” in the Help file that came with Musicsoft Downloader. ● Requirements for song data that can be loaded from a computer to this instrument • Number of songs : Up to 10 songs plus one user song • Maximum data size : Total 352 KB • Data format : SMF Format 0 and 07YDP.BUP (user song) Transmitting Song Data from the Digital Piano to a Computer Musicsoft Downloader enables you to transfer the user song in this instrument to a computer. For more information on transferring song data from this instrument to a computer, please refer to “Transferring Data Between the Computer and Instrument (for unprotected data)” in the Help file that came with Musicsoft Downloader. SMF (Standard MIDI File) This file features a popular sequence format (for recording performance data). This file is sometimes called a “MIDI file.” The file extension is MID. You can play the SMF format song using music software or a sequencer that supports SMF. This instrument also supports SMF. CAUTION Do not turn off the power to this instrument or unplug the instrument during data transmission. Otherwise, the data being transmitted will not be saved. Furthermore, flash memory operation may become unstable, causing the entire memory to be erased when you turn the power to the instrument on or off. Keep in mind that the [REC] and [PLAY] indicators are lit when Musicsoft Downloader is being used. Before you use this instrument, close the Musicsoft Downloader window and quit the application. ● Data you can transfer from this instrument to a computer 29 • User song : 07YDP.BUP • Song data (once it has been loaded from the computer) YDP-S30 Owner’s Manual 31 Backing up Data and Initializing the Settings Backing up data to flash memory The following items will be stored in flash memory on this instrument. This data will be kept after you turn off the power to the instrument. Backup data Metronome volume Metronome tempo Touch sensitivity ENGLISH Tuning Recorded performance data (user song) Initializing the settings When you initialize the settings, all data, excluding the songs loaded from a computer, will be initialized and reset to the factory default settings. While holding down the C7 (the highest) key, turn on the power to the instrument. All backup data will be initialized. C7 The highest key CAUTION Do not turn off the power to this instrument while it is initializing the data in its internal memory (that is, while the [REC] and [PLAY] button indicators are flashing). If this instrument somehow becomes disabled or malfunctions, turn off the power to the instrument, then perform the initialization procedure. 30 32 YDP-S30 Owner’s Manual Troubleshooting Possible Cause and Solution This instrument has not been plugged in properly. Insert the adaptor plug into an AC outlet and the adaptor socket into the unit securely (page 10). Noise from the speakers or headphones is audible. The noise may be due to interference caused by the use of a mobile phone in close proximity to this instrument. Turn off the mobile phone, or move it further away from this instrument. The overall volume is low, or no sound is heard. • The Master Volume is set too low. Set it to an appropriate level using the [MASTER VOLUME] control. • Make sure a pair of headphones is not connected to the headphones jack. • Make sure that Local Control (page 29) is ON. The damper pedal has no effect, or the sound continuously sustains even when the damper pedal is not pressed. The pedal cord may not be properly connected. Make sure to securely insert the pedal cord into the [PEDAL] jack (page 34). Options ENGLISH Problem This instrument does not turn on. BC-100 Bench A comfortable bench styled to match your Yamaha digital piano. UX16 USB-MIDI interface HPE-150 31 Headphones YDP-S30 YDP-S30 Troubleshooting/Options Owner’s Manual 33 Keyboard Stand Assembly CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least two persons. • Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage. • Be sure to tighten up all screws upon completing assembly of each unit. • To disassemble, reverse the assembly sequence given below. ENGLISH Have a Phillips-head (+) screwdriver ready Remove all parts from the box. Confirm that all parts shown in the illustration are provided. AC Power Adaptor* x 1 5 x 20mm thin screws x 4 6 x 30mm long screws x 4 Cord holders x 5 6 x 20mm short screws x 4 Back toe x 2 A F C E D B * The adaptor may not be included, or may look different from the illustration above, depending on your particular area. Please check with your Yamaha dealer. 1 2 Attach B to C and D. 1-1 Align C and D with each end of B. 1-2 Attach C and D to B by tightening the long screws (6 x 30 mm) securely. Mount A. Be sure to place your hands at least 10 cm from either end of A when positioning it. 1 A D C B 2 Align the screw holes. CAUTION • Be careful not to pinch your fingers or drop the unit. • Do not hold the keyboard in any position other than the position instructed in this document. 32 34 YDP-S30 Owner’s Manual Secure A. 4-3 Insert the pedal cord plug to the pedal jack from the rear. 4-4 Attach the cord holders to the rear panel as shown, then clip the cord into the holders. 4-5 Remove the screws from both ends of B, then attach the back toe using the screws. 3-1 Adjust the position of A so that the left and right ends of A will project beyond C and D equally when seen from the front. 3-2 Secure A by tightening four short screws (6 x 20 mm) from the bottom. 3 1 A 4 A ENGLISH 3 B 5 2 CAUTION 4 Attach E. 4-1 Untie and straighten out the bundled pedal cord, then pass it through the indentation on B. 4-2 Lift B and insert the top part of E into the indentation on B so that the pedal unit will be securely attached to B. 2 • If there is no wall immediately behind the instrument, be sure to install anti-fall brackets (Back toe) on the instrument. • The pedals may damage the floor after an extended period of time. Protect the floor by placing a mat or area rug underneath the pedals. 5 Install F. 5-1 Attach F on the rear of A as shown in the illustration. 5-2 Secure F by tightening the thin screws (5 x 20mm). B 1 E A F CAUTION 33 When you attach F, be careful not to pinch the cord. YDP-S30 Owner’s Manual 35 6 Connect the AC adaptor. 6-1 Insert the AC adaptor plug into the DC-IN 12V jack from the rear. 6-2 Attach the cord holder on the right (or left) end (whichever is closer to an AC outlet) of F, then clip the power cord into the holder. 1 After completing the assembly, please check the following. • Are there any parts left over? ➝ Review the assembly procedure and correct any errors. • Is the instrument clear of doors and other movable fixtures? ➝ Move the instrument to an appropriate location. • Does the instrument make a rattling noise when you shake it? ➝ Tighten all screws. • Are the pedal and power cords inserted securely into the sockets? ➝ Check the connection. ENGLISH F • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. 2 CAUTION When moving the instrument after assembly, always hold instrument by the lower surface in the front of the main unit and by the handles in the rear panel. Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. 34 36 YDP-S30 Owner’s Manual Index Numerics P 50 Piano Preset Songs .....................................................16 PEDAL ....................................................................... 14, 19 PHONES.................................................................... 12, 14 A PIANO/VOICE ......................................................... 14, 18 Accessories .........................................................................8 PLAY.......................................................................... 14, 26 Assembly ....................................................................34–36 Playing Back Recorded Performance Data .................... 26 Center Pedal ..............................................................14, 19 Connecting a Computer .................................................28 R REC ............................................................................ 14, 25 Recording your Performance ......................................... 25 D Damper Pedal ............................................................14, 19 DEMO/SONG .....................................................14, 15–17 Dual mode .......................................................................21 I Initializing the Settings ...................................................32 K Reverb.............................................................................. 20 Reverb Depth .................................................................. 20 Right Pedal ................................................................ 14, 19 S SELECT –/+...............................................................14–16 Soft Pedal................................................................... 14, 19 Song ................................................................................. 16 Sostenute Pedal ......................................................... 14, 19 Specifications................................................................... 46 Keyboard Stand .........................................................34–36 Stand ..........................................................................34–36 Keyboard Touch..............................................................24 STANDBY/ON.......................................................... 10, 14 L Start/Stop playback 50 Piano Preset Songs ............................................... 16 Demo Songs............................................................... 15 Layering Two Voices (Dual mode) ................................21 Left Pedal ...................................................................14, 19 M MASTER VOLUME ..................................................12, 14 METRONOME .........................................................14, 23 MIDI ................................................................................27 MIDI [IN] [OUT] ...............................................14, 27, 28 MIDI cables .....................................................................27 MIDI connectors .......................................................27, 28 MIDI Data Format ..........................................................40 ENGLISH C Preset songs ➝ 50 Piano Preset Songs ........................... 16 T Tempo (metronome)...................................................... 23 Touch Sensitivity............................................................. 24 Transmitting Song Data ................................................. 31 Transporting ..................................................................... 8 Transposition .................................................................. 22 Troubleshooting.............................................................. 33 U MIDI Implementation Chart..........................................44 User Song......................................................................... 25 Musicsoft Downloader....................................................31 UX16................................................................................ 28 V Voice ................................................................................ 18 35 Volume (metronome) .................................................... 24 YDP-S30 Owner’s Manual 37 ENGLISH MEMO 36 38 YDP-S30 Owner’s Manual Appendix/Anhang/ Annexe/Apéndice This section introduces reference material. In diesem Abschnitt finden Sie Referenzmaterial. Cette section présente le matériel de référence. En esta sección se incluye material de referencia. 145 MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI ................... 40 MIDI Implementation Chart / MIDI Implementierung stabelle / Feuille d’implantation MIDI / Gráfica de implementación MIDI ................................................................... 44 Specifications / Technische Daten / Caractéristiques techniques / Especificaciones .......................................... 46 YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones 39 MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI If you’re already very familiar with MIDI, or are using a computer to control your music hardware with computergenerated MIDI messages, the data provided in this section can help you to control this instrument. Falls Sie bereits mit MIDI vertraut sind oder einen Computer zur Erzeugung von MIDI-Steuermeldungen für die Instrumente verwenden, können Sie sich zur Steuerung des YDP-S30 nach den im folgenden Abschnitt aufgeführten Spezifikationen richten. Si vous êtes très familier avec l’interface MIDI ou si vous utilisez un ordinateur pour commander votre matériel de musique au moyen de messages MIDI générés par ordinateur, les données suivantes vous seront utiles et vous aideront à commander le YDP-S30. SI usted está ya familiarizado con MIDI, o si emplea una computadora para controlar sus aparatos musicales con mensajes MIDI generados por computadora, los datos proporcionados en esta sección le ayudarán a controlar la YDP-S30. 1. NOTE ON/OFF 3. MODE MESSAGES Data format: [9nH] -> [kk] -> [vv] Data format: [BnH] -> [cc] -> [vv] 9nH = Note ON/OFF event (n = channel number) kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 / Receive: 00H ~ 7FH = C-2 ~ G8) vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H) Data format: [8nH] -> [kk] -> [vv] (reception only) 8nH = Note OFF event (n = channel number) kk = Note number: 00H ~ 7FH = C-2 ~ G8) vv = Velocity 2. CONTROL CHANGE Data format: [BnH] -> [cc] -> [vv] BnH = Control change (n = channel number) cc = Control number vv = Data Range (1) Bank Select ccH Parameter Data Range (vvH) 00H Bank Select MSB 00H:Normal 20H Bank Select LSB 00H...7FH Bank selection processing does not occur until receipt of next Program Change message. (2) Main Volume ccH Parameter 07H Volume MSB Data Range (vvH) 00H...7FH (3) Expression (reception only) ccH Parameter Data Range (vvH) 0BH Expression MSB 00H...7FH (4) Damper ccH Parameter 40H Damper MSB Data Range (vvH) 00H...7FH (5) Sostenuto ccH Parameter 42H Sostenuto Data Range (vvH) 00H-3FH:off, 40H-7FH:on (6) Soft Pedal ccH Parameter 43H Soft Pedal Data Range (vvH) 00H-3FH:off, 40H-7FH:on (7) Effect1 Depth (Reverb Send Level) ccH Parameter Data Range (vvH) 5BH Effect1 Depth 00H...7FH Adjusts the reverb send level. (8) Effect4 Depth (Variation Effect Send Level) ccH Parameter Data Range (vvH) 5EH Effect4 Depth 00H...7FH (9) RPN 65H RPN MSB 64H RPN LSB 06H Data Entry MSB 26H Data Entry LSB 60H Data Increment 61H Data Decrement * Parameters that are controllable with RPN • Coarse Tune • Fine Tune • Pitch Bend Range BnH = Control event (n = channel number) cc = Control number vv = Data Range (1) All Sound Off ccH Parameter 78H All Sound Off (2) Reset All Controllers ccH Parameter 79H Reset All Controllers Resets controllers as follows. Controller Expression Damper Pedal Sostenuto Soft Pedal Data Range (vvH) 00H Data Range (vvH) 00H Value 127 (max) 0 (off) 0 (off) 0 (off) (3) Local Control (reception only) ccH Parameter Data Range (vvH) 7AH Local Control 00H (off), 7FH (on) (4) All Notes Off ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the specified channel. Any notes being held by the damper or sostenuto pedal will continue to sound until the pedal is released. (5) Omni Off (reception only) ccH Parameter Data Range (vvH) 7CH Omni Off 00H Same processing as for All Notes Off. (6) Omni On (reception only) ccH Parameter Data Range (vvH) 7DH Omni On 00H Same processing as for All Notes Off. (7) Mono (reception only) ccH Parameter Data Range (vvH) 7EH Mono 00H Same processing as for All Sound Off. (8) Poly (reception only) ccH Parameter Data Range (vvH) 7FH Poly 00H Same processing as for All Sound Off. • When Control Change is turned OFF, Control Change messages will not be transmitted or received. • Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with “All Note Off” transmission). • When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received. • Poly mode is always active. This mode will not change when the instrument receives MONO/POLY mode message. 146 40 YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones 4. PROGRAM CHANGE 7. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive) Data format: [CnH] -> [ppH] CnH = Program event (n = channel number) ppH = Program change number P.C.#=Program Change number YDP-S30 Grand Piano 1 Grand Piano 2 E.Piano MSB 0 0 0 LSB 122 112 122 P.C.# 1 1 6 Harpsichord Church Organ Strings 0 0 0 122 123 122 7 20 49 • When program change reception is turned OFF, no program change data is transmitted or received. • When you specify a program change as a number in the range of 0-127, specify a number that is one less than the program change number listed above. For example, to specify program change number 1, you would specify program change 0. 5. Pitch Bend Change [EnH] -> [ccH] -> [ddH] ccH = LSB ddH = MSB 6. SYSTEM REALTIME MESSAGES [rrH] F8H: Timing clock FAH: Start FCH: Stop FEH: Active sensing Data Transmission F8H Transmitted every 96 clocks FAH Song start FCH Song stop FEH Transmitted every 200 milliseconds (1) Universal Realtime Message Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [llH] -> [mmH] -> [F7H] MIDI Master Volume • Simultaneously changes the volume of all channels. • When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master volume. F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive or F0H = Exclusive status 7FH = Universal Realtime XnH = When n is received n=0~F, whichever is received. X = don’t care 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive (2) Universal Non-Realtime Message (GM On) General MIDI Mode On Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> [F7H] Reception Received as 96-clock tempo timing when MIDI clock is set to External. Song start Not received when the MIDI clock is set to Internal. Song stop Not received when the MIDI clock is set to Internal. If a signal is not received via MIDI for more than 400 milliseconds, the same processing will take place for All Sound Off, All Notes Off and Reset All Controllers as when those signals are received. 147 • If an error occurs during MIDI reception, the Damper, Sostenuto, and Soft effects for all channels are turned off and an All Note Off occurs. F0H = Exclusive status 7EH = Universal Non-Realtime 7FH = ID of target device 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive or F0H = Exclusive status 7EH = Universal Non-Realtime XnH = When received, n=0~F. X = don’t care 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive When the General MIDI mode ON message is received, the MIDI system will be reset to its default settings. This message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent. YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones 41 8. SYSTEM EXCLUSIVE MESSAGES (XG Standard) (1) XG Native Parameter Change Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] -> [F7H] F0H = Exclusive status 43H = YAMAHA ID 1nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | F7H = End of Exclusive Data size must match parameter size (2 or 4 bytes). When the XG System On message is received, the MIDI system will be reset to its default settings. The message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent. (2) XG Native Bulk Data (reception only) Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] -> [bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->...-> [ccH] -> [F7H] F0H = Exclusive status 43H = YAMAHA ID 0nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG aaH = ByteCount bbH = ByteCount hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | | | | ccH = Check sum F7H = End of Exclusive • Receipt of the XG SYSTEM ON message causes reinitialization of relevant parameters and Control Change values. Allow sufficient time for processing to execute (about 50 msec) before sending this instrument another message. • XG Native Parameter Change message may contain two or four bytes of parameter data (depending on the parameter size). • For information about the Address and Byte Count values, refer to Table 1 below. Note that the table’s Total Size value gives the size of a bulk block. Only the top address of the block (00H, 00H, 00H) is valid as a bulk data address. 10. SYSTEM EXCLUSIVE MESSAGES (Special Control) Data format: [F0H] -> [43H] -> [73H] -> [66H] -> [11H] -> [0nH] -> [ccH] -> [vvH] -> [F7H] F0H = 43H = 73H = 7FH = 4BH = 11H = 0nH = cc = vv = F7H = Exclusive status Yamaha ID Digital Piano ID Extended Product ID Product ID Special control Control MIDI change (n=channel number) Control number Value End of Exclusive Control Metronome Channel Always 00H ccH 1BH vvH 00H : off 01H : – 02H : 2/4 03H : 3/4 04H : 4/4 05H : 5/4 06H : 6/4 7FH : No accent Channel Detune ch: 00H-0FH 43H (Sets the Detune value for each channel) 00H-7FH Voice Reserve ch: 00H-0FH 45H 00H : Reserve off 7FH : on* * When Volume, Expression is received for Reserve On, they will be effective from the next Key On. Reserve Off is normal. 11. SYSTEM EXCLUSIVE MESSAGES (Others) Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H] -> [00H] -> [mmH] -> [llH] -> [ccH] -> [F7H] Master Tuning (XG and last message priority) simultaneously changes the pitch of all channels. F0H = Exclusive Status 43H = Yamaha ID 1nH = When received, n=0~F. When transmitted, n=0. 27H = Model ID of TG100 30H = Sub ID 00H = 00H = mmH = Master Tune MSB llH = Master Tune LSB ccH = don’t care (under 7FH) F7H = End of Exclusive 9. SYSTEM EXCLUSIVE MESSAGES (Digital Piano MIDI Format) Data format: [F0H] -> [43H] -> [73H] -> [xxH] -> [nnH] -> [F7H] F0H = 43H = 73H = 01H = xxH = nn 02H 03H 06H F7H = Exclusive status Yamaha ID Digital Piano ID Product ID (digital piano common) Substatus Control Internal MIDI clock External MIDI clock Bulk Data (the bulk data follows 06H) End of Exclusive 148 42 YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones <Table 1> MIDI Parameter Change table (SYSTEM) Address (H) Size (H) Data (H) 00 00 00 4 020C - 05F4(*1) 01 02 03 04 1 7E 7F TOTAL SIZE 07 00 - 7F 00 00 Parameter MASTER TUNE MASTER VOLUME XG SYSTEM ON RESET ALL PARAMETERS Description -50 - +50[cent] 1st bit 3 - 0 ➝ bit 15 - 12 2nd bit 3 - 0 ➝ bit 11 - 8 3rd bit 3 - 0 ➝ bit 7 - 4 4th bit 3 - 0 ➝ bit 3 - 0 0 - 127 00=XG sytem ON 00=ON (receive only) Default value (H) 00 04 00 00 400 7F *1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents. <Table 2> MIDI Parameter Change table (EFFECT 1) Refer to the “Effect MIDI Map” for a complete list of Reverb, Chorus and Variation type numbers. Address (H) 02 01 00 Size (H) 2 02 01 40 2 Data (H) 00-7F 00-7F Parameter REVERB TYPE MSB REVERB TYPE LSB 00-7F VARIATION TYPE MSB 00-7F VARIATION TYPE LSB • “VARIATION” refers to the EFFECT on the panel. Description Refer to Effect MIDI Map 00 : basic type Default value (H) 01(=HALL1) 00 Refer to Effect MIDI Map 00 : basic type 00(=Effect off) 00 Description 0 - 127 Default value (H) 7F <Table 3> MIDI Parameter Change table (MULTI PART) Address (H) Size (H) 08 nn 11 1 nn = Part Number Data (H) 00 - 7F Parameter DRY LEVEL • Effect MIDI Map REVERB ROOM HALL 1 HALL 2 STAGE OFF MSB 02H 01H 01H 03H 00H LSB 10H 10H 11H 10H 00H MSB 42H 48H 46H 47H 00H LSB 10H 10H 10H 10H 00H EFFECT 149 CHORUS PHASER TREMOLO ROTARY SP OFF YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones 43 150 44 o x o x x x o x o x Control Change 0,32 1 7 10 11 6, 38 64,66,67 84 91,94 96-97 YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones *1 *1 *1 *1 *1 *1 *1 x Pitch Bend o o o o o o o o o o o 0-24 semi x x Key's Ch's After Touch *1 Note ON Note OFF Velocity x x ************** o 9nH,v=1-127 x True voice o 9nH,v=1-127 x : 0-127 0-127 0-127 Note Number 3 x x 3 x ************** Default Messages Altered Mode 1-16 1-16 1-16 1 Default Changed Recognized Basic Channel Transmitted [ Digital Piano ] Model YDP-S30 MIDI Implementation Chart Function... YAMAHA Portament Control Effect Depth RPN Inc, Dec RPN LSB, MSB Bank Select Modulation Main Volume Panpot Expression Data Entry Remarks Date :18-Jan-2007 Version : 1.0 MIDI Implementation Chart YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones 45 151 All Sound Off Reset All Cntrls Local ON/OFF All Notes OFF Active Sense Reset Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY Notes: : : : : : : o o o o o x (120,126,127) (121) (122) (123-125) , Mode 2 : OMNI ON, MONO Mode 4 : OMNI OFF, MONO o : Yes x : No *1 These Control Change messages are not transmitted via panel operation, but may be transmitted during song playback. o o x o o x o o o o : Clock : Commands System Real Time Aux Messages x x x x x x : Song Pos. : Song Sel. : Tune o 0 - 127 Common o 0 - 127 ************** o o True # *1 o : x System Exclusive Prog Change 100-101 Specifications / Technische Daten / Caractéristiques techniques / Especificaciones Item Keyboard Sound Source Polyphony Voice Selection Effect YDP-S30 GHS 88 Keys (A-1 - C7) AWM Stereo Sampling 64 Notes Max. 6 Reverb Volume Master Volume Controls Dual, Metoronome, Transpose Pedal Damper (with half-pedal effect), Sostenuto, Soft Demo Songs 6 Demo Songs, 50 Piano Preset Songs Recording Function One song 65 KB (approx. 11,000 notes) Loading song data from a computer Jacks/Connectors Main Amplifiers Speakers Dimensions (W × D × H) Weight Accessories Up to 10 songs; Total maximum size 352 KB MIDI (IN/OUT), PHONES × 2 6W × 2 Oval (12cm × 6cm) × 2 With key cover closed: 1390mm x 299mm x 783mm [54-3/4" x 11-3/4" x 30-13/16"] With key cover open: 1390mm x 299mm x 982mm [54-3/4" x 11-3/4" x 38-11/16"] With anti-fall brackets attached, the depth is 370mm [14-9/16"] 36kg (79 lbs., 6 oz.) Owner’s Manual, “50 greats for the Piano” (Music Book), Quick Operation Guide, Assembly parts * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. * Die technischen Daten und Beschreibungen in dieser Bedienungsanleitung dienen nur der Information. Yamaha Corp. behält sich das Recht vor, Produkte oder deren technische Daten jederzeit ohne vorherige Ankündigung zu verändern oder zu modifizieren. Da die technischen Daten, das Gerät selbst oder Sonderzubehör nicht in jedem Land gleich sind, setzen Sie sich im Zweifel bitte mit Ihrem Yamaha-Händler in Verbindung. * Les caractéristiques techniques et les descriptions du mode d’emploi ne sont données que pour information. Yamaha Corp. se réserve le droit de changer ou modifier les produits et leurs caractéristiques techniques à tout moment sans aucun avis. Du fait que les caractéristiques techniques, les équipements et les options peuvent différer d’un pays à l’autre, adressez-vous au distributeur Yamaha le plus proche. * Las especificaciones y descripciones de este manual del propietario tienen sólo el propósito de servir como información. Yamaha Corp. se reserva el derecho a efectuar cambios o modificaciones en los productos o especificaciones en cualquier momento sin previo aviso. Puesto que las especificaciones, equipos u opciones pueden no ser las mismas en todos los mercados, solicite información a su distribuidor Yamaha. 152 46 YDP-S30 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones FCC INFORMATION (U.S.A.) other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/ uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. OBSERVERA! Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar ansluten till vägguttaget, även om själva apparaten har stängts av. ADVARSEL: Netspæendingen til dette apparat er IKKE afbrudt, sålæenge netledningen siddr i en stikkontakt, som er t endt — også selvom der or slukket på apparatets afbryder. VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko laitetta verkosta. (standby) IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying the terminals in your plug proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. 153 • This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. (2 wires) (class B) For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. THE NETHERLANDS/ BELGIUM/LUXEMBOURG Yamaha Music Central Europe GmbH, Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040 FRANCE U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México S.A. de C.V. Calz. Javier Rojo Gómez #1149, Col. Guadalupe del Moral C.P. 09300, México, D.F., México Tel: 55-5804-0600 Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 ITALY Yamaha Musica Italia S.P.A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 SPAIN/PORTUGAL Yamaha-Hazen Música, S.A. Ctra. de la Coruna km. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 GREECE BRAZIL Yamaha Musical do Brasil Ltda. Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi, CEP 04534-013 Sao Paulo, SP. BRAZIL Tel: 011-3704-1377 ARGENTINA Yamaha Music Latin America, S.A. Sucursal de Argentina Viamonte 1145 Piso2-B 1053, Buenos Aires, Argentina Tel: 1-4371-7021 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanización Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, Panamá Tel: +507-269-5311 EUROPE THE UNITED KINGDOM Yamaha-Kemble Music (U.K.) Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700 IRELAND Danfay Ltd. 61D, Sallynoggin Road, Dun Laoghaire, Co. Dublin Tel: 01-2859177 GERMANY Yamaha Music Central Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 SWITZERLAND/LIECHTENSTEIN Yamaha Music Central Europe GmbH, Branch Switzerland Seefeldstrasse 94, 8008 Zürich, Switzerland Tel: 01-383 3990 AUSTRIA Yamaha Music Central Europe GmbH, Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 CZECH REPUBLIC/SLOVAKIA/ HUNGARY/SLOVENIA Yamaha Music Central Europe GmbH, Branch Austria, CEE Department Schleiergasse 20, A-1100 Wien, Austria Tel: 01-602039025 POLAND Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160 ASIA THE PEOPLE’S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 25/F., United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: 021-6247-2211 HONG KONG Tom Lee Music Co., Ltd. 11/F., Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 21-520-2577 KOREA Yamaha Music Korea Ltd. 8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong, Kangnam-Gu, Seoul, Korea Tel: 080-004-0022 MALAYSIA Yamaha Music Malaysia, Sdn., Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-78030900 SWEDEN Yamaha Scandinavia AB J. A. Wettergrens Gata 1 Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 PHILIPPINES DENMARK YS Copenhagen Liaison Office Generatorvej 6A DK-2730 Herlev, Denmark Tel: 44 92 49 00 FINLAND F-Musiikki Oy Kluuvikatu 6, P.O. Box 260, SF-00101 Helsinki, Finland Tel: 09 618511 Yupangco Music Corporation 339 Gil J. Puyat Avenue, P.O. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 SINGAPORE Yamaha Music Asia Pte., Ltd. #03-11 A-Z Building 140 Paya Lebor Road, Singapore 409015 Tel: 747-4374 TAIWAN NORWAY Norsk filial av Yamaha Scandinavia AB Grini Næringspark 1 N-1345 Østerås, Norway Tel: 67 16 77 70 ICELAND Skifan HF Skeifan 17 P.O. Box 8120 IS-128 Reykjavik, Iceland Tel: 525 5000 Yamaha KHS Music Co., Ltd. 3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C. Tel: 02-2511-8688 THAILAND Siam Music Yamaha Co., Ltd. 891/1 Siam Motors Building, 15-16 floor Rama 1 road, Wangmai, Pathumwan Bangkok 10330, Thailand Tel: 02-215-2626 OTHER ASIAN COUNTRIES OTHER EUROPEAN COUNTRIES Yamaha Music Central Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317 OCEANIA AFRICA Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 MIDDLE EAST TURKEY/CYPRUS Yamaha Music Central Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 OTHER COUNTRIES Yamaha Music Gulf FZE LOB 16-513, P.O.Box 17328, Jubel Ali, Dubai, United Arab Emirates Tel: +971-4-881-5868 AUSTRALIA Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111 NEW ZEALAND Music Houses of N.Z. Ltd. 146/148 Captain Springs Road, Te Papapa, Auckland, New Zealand Tel: 9-634-0099 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 Yamaha Music Central Europe GmbH Sp.z. o.o. Oddzial w Polsce ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland Tel: 022-868-07-57 HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-3273 [CL] 40 Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2007 Yamaha Corporation WJ96040 703APAP5.3-01B0 Printed in China
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49

Yamaha S30 El manual del propietario

Categoría
Sintetizador
Tipo
El manual del propietario
Este manual también es adecuado para